@ifc-lite/create 2.2.1 → 2.4.0

package/dist/in-store/anchor.d.ts

@@ -54,8 +54,23 @@ export interface SpatialAnchor {
  * Convert a metre value to the anchor's native length unit for STEP emit.
  * Rounded to 9 decimals to absorb the float noise the division introduces
  * (2.8 / 0.001 = 2799.9999999999995 → 2800).
+ *
+ * Takes only `{ lengthUnitScale }` rather than a full `SpatialAnchor` so
+ * narrower anchor shapes (e.g. `drawing-markup.ts`'s `MarkupAnchor`, which
+ * has no `bodyContextId`/`axisContextId`/`storeyId` — markup geometry has no
+ * use for them) can share this one conversion instead of re-implementing it.
+ */
+export declare function toNativeLength(anchor: Pick<SpatialAnchor, 'lengthUnitScale'>, metres: number): number;
+/**
+ * Inverse of {@link toNativeLength}: convert a value stored in the anchor's
+ * native length unit back to metres. Used by read-side translators (e.g.
+ * `apps/viewer`'s drawing-markup reader) to invert a derived value a writer
+ * scaled with `toNativeLength` before storing it in a quantity set — the
+ * mathematical inverse of that function's rounding rule, kept next to it so
+ * a future change to the rounding constant cannot update one side without
+ * the other.
  */
-export declare function toNativeLength(anchor: SpatialAnchor, metres: number): number;
+export declare function fromNativeLength(anchor: Pick<SpatialAnchor, 'lengthUnitScale'>, native: number): number;
 /** 2D point variant of {@link toNativeLength}. */
 export declare function toNativePoint2(anchor: SpatialAnchor, p: readonly [number, number]): [number, number];
 /** 3D point variant of {@link toNativeLength}. */

package/dist/in-store/anchor.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"anchor.d.ts","sourceRoot":"","sources":["../../src/in-store/anchor.ts"],"names":[],"mappings":"AAIA;;;;;;;;GAQG;AAEH,OAAO,KAAK,EAAE,YAAY,EAAE,MAAM,oBAAoB,CAAC;AAEvD,MAAM,MAAM,mBAAmB,GAAG,QAAQ,GAAG,MAAM,GAAG,QAAQ,GAAG,MAAM,CAAC;AAExE,MAAM,WAAW,aAAa;IAC5B;;;;OAIG;IACH,cAAc,EAAE,MAAM,GAAG,IAAI,CAAC;IAC9B,2GAA2G;IAC3G,aAAa,EAAE,MAAM,CAAC;IACtB,2GAA2G;IAC3G,aAAa,EAAE,MAAM,CAAC;IACtB,8CAA8C;IAC9C,QAAQ,EAAE,MAAM,CAAC;IACjB,0GAA0G;IAC1G,iBAAiB,EAAE,MAAM,CAAC;IAC1B;;;;OAIG;IACH,MAAM,CAAC,EAAE,mBAAmB,CAAC;IAC7B;;;;;;;OAOG;IACH,eAAe,CAAC,EAAE,MAAM,CAAC;IACzB;;;;;;;;OAQG;IACH,UAAU,CAAC,EAAE,YAAY,CAAC;CAC3B;AAED;;;;GAIG;AACH,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,MAAM,EAAE,MAAM,GAAG,MAAM,CAI5E;AAED,kDAAkD;AAClD,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAEpG;AAED,kDAAkD;AAClD,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAEpH"}
+{"version":3,"file":"anchor.d.ts","sourceRoot":"","sources":["../../src/in-store/anchor.ts"],"names":[],"mappings":"AAIA;;;;;;;;GAQG;AAEH,OAAO,KAAK,EAAE,YAAY,EAAE,MAAM,oBAAoB,CAAC;AAEvD,MAAM,MAAM,mBAAmB,GAAG,QAAQ,GAAG,MAAM,GAAG,QAAQ,GAAG,MAAM,CAAC;AAExE,MAAM,WAAW,aAAa;IAC5B;;;;OAIG;IACH,cAAc,EAAE,MAAM,GAAG,IAAI,CAAC;IAC9B,2GAA2G;IAC3G,aAAa,EAAE,MAAM,CAAC;IACtB,2GAA2G;IAC3G,aAAa,EAAE,MAAM,CAAC;IACtB,8CAA8C;IAC9C,QAAQ,EAAE,MAAM,CAAC;IACjB,0GAA0G;IAC1G,iBAAiB,EAAE,MAAM,CAAC;IAC1B;;;;OAIG;IACH,MAAM,CAAC,EAAE,mBAAmB,CAAC;IAC7B;;;;;;;OAOG;IACH,eAAe,CAAC,EAAE,MAAM,CAAC;IACzB;;;;;;;;OAQG;IACH,UAAU,CAAC,EAAE,YAAY,CAAC;CAC3B;AAED;;;;;;;;;GASG;AACH,wBAAgB,cAAc,CAAC,MAAM,EAAE,IAAI,CAAC,aAAa,EAAE,iBAAiB,CAAC,EAAE,MAAM,EAAE,MAAM,GAAG,MAAM,CAIrG;AAED;;;;;;;;GAQG;AACH,wBAAgB,gBAAgB,CAAC,MAAM,EAAE,IAAI,CAAC,aAAa,EAAE,iBAAiB,CAAC,EAAE,MAAM,EAAE,MAAM,GAAG,MAAM,CAIvG;AAED,kDAAkD;AAClD,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,CAAC,MAAM,EAAE,MAAM,CAAC,CAEpG;AAED,kDAAkD;AAClD,wBAAgB,cAAc,CAAC,MAAM,EAAE,aAAa,EAAE,CAAC,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,GAAG,CAAC,MAAM,EAAE,MAAM,EAAE,MAAM,CAAC,CAEpH"}

package/dist/in-store/anchor.js

@@ -5,6 +5,11 @@
  * Convert a metre value to the anchor's native length unit for STEP emit.
  * Rounded to 9 decimals to absorb the float noise the division introduces
  * (2.8 / 0.001 = 2799.9999999999995 → 2800).
+ *
+ * Takes only `{ lengthUnitScale }` rather than a full `SpatialAnchor` so
+ * narrower anchor shapes (e.g. `drawing-markup.ts`'s `MarkupAnchor`, which
+ * has no `bodyContextId`/`axisContextId`/`storeyId` — markup geometry has no
+ * use for them) can share this one conversion instead of re-implementing it.
  */
 export function toNativeLength(anchor, metres) {
     const scale = anchor.lengthUnitScale;
@@ -12,6 +17,21 @@ export function toNativeLength(anchor, metres) {
         return metres;
     return Math.round((metres / scale) * 1e9) / 1e9;
 }
+/**
+ * Inverse of {@link toNativeLength}: convert a value stored in the anchor's
+ * native length unit back to metres. Used by read-side translators (e.g.
+ * `apps/viewer`'s drawing-markup reader) to invert a derived value a writer
+ * scaled with `toNativeLength` before storing it in a quantity set — the
+ * mathematical inverse of that function's rounding rule, kept next to it so
+ * a future change to the rounding constant cannot update one side without
+ * the other.
+ */
+export function fromNativeLength(anchor, native) {
+    const scale = anchor.lengthUnitScale;
+    if (!scale || !Number.isFinite(scale) || scale <= 0 || scale === 1)
+        return native;
+    return Math.round(native * scale * 1e9) / 1e9;
+}
 /** 2D point variant of {@link toNativeLength}. */
 export function toNativePoint2(anchor, p) {
     return [toNativeLength(anchor, p[0]), toNativeLength(anchor, p[1])];

package/dist/in-store/anchor.js.map

@@ -1 +1 @@
-{"version":3,"file":"anchor.js","sourceRoot":"","sources":["../../src/in-store/anchor.ts"],"names":[],"mappings":"AAAA;;+DAE+D;AA0D/D;;;;GAIG;AACH,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,MAAc;IAClE,MAAM,KAAK,GAAG,MAAM,CAAC,eAAe,CAAC;IACrC,IAAI,CAAC,KAAK,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,IAAI,KAAK,IAAI,CAAC,IAAI,KAAK,KAAK,CAAC;QAAE,OAAO,MAAM,CAAC;IAClF,OAAO,IAAI,CAAC,KAAK,CAAC,CAAC,MAAM,GAAG,KAAK,CAAC,GAAG,GAAG,CAAC,GAAG,GAAG,CAAC;AAClD,CAAC;AAED,kDAAkD;AAClD,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,CAA4B;IAChF,OAAO,CAAC,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;AACtE,CAAC;AAED,kDAAkD;AAClD,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,CAAoC;IACxF,OAAO,CAAC,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;AACpG,CAAC"}
+{"version":3,"file":"anchor.js","sourceRoot":"","sources":["../../src/in-store/anchor.ts"],"names":[],"mappings":"AAAA;;+DAE+D;AA0D/D;;;;;;;;;GASG;AACH,MAAM,UAAU,cAAc,CAAC,MAA8C,EAAE,MAAc;IAC3F,MAAM,KAAK,GAAG,MAAM,CAAC,eAAe,CAAC;IACrC,IAAI,CAAC,KAAK,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,IAAI,KAAK,IAAI,CAAC,IAAI,KAAK,KAAK,CAAC;QAAE,OAAO,MAAM,CAAC;IAClF,OAAO,IAAI,CAAC,KAAK,CAAC,CAAC,MAAM,GAAG,KAAK,CAAC,GAAG,GAAG,CAAC,GAAG,GAAG,CAAC;AAClD,CAAC;AAED;;;;;;;;GAQG;AACH,MAAM,UAAU,gBAAgB,CAAC,MAA8C,EAAE,MAAc;IAC7F,MAAM,KAAK,GAAG,MAAM,CAAC,eAAe,CAAC;IACrC,IAAI,CAAC,KAAK,IAAI,CAAC,MAAM,CAAC,QAAQ,CAAC,KAAK,CAAC,IAAI,KAAK,IAAI,CAAC,IAAI,KAAK,KAAK,CAAC;QAAE,OAAO,MAAM,CAAC;IAClF,OAAO,IAAI,CAAC,KAAK,CAAC,MAAM,GAAG,KAAK,GAAG,GAAG,CAAC,GAAG,GAAG,CAAC;AAChD,CAAC;AAED,kDAAkD;AAClD,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,CAA4B;IAChF,OAAO,CAAC,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;AACtE,CAAC;AAED,kDAAkD;AAClD,MAAM,UAAU,cAAc,CAAC,MAAqB,EAAE,CAAoC;IACxF,OAAO,CAAC,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,EAAE,cAAc,CAAC,MAAM,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC;AACpG,CAAC"}

package/dist/in-store/drawing-markup-geometry.d.ts

@@ -0,0 +1,46 @@
+/**
+ * Geometry emitters local to `drawing-markup.ts`, kept out of the shared
+ * `_emit-helpers.ts` deliberately: annotation curves/placements are a
+ * different shape than the swept-solid prologue every element builder
+ * shares (bare `IfcPolyline`, not a closed profile; an `Annotation`
+ * `IfcShapeRepresentation`, not `Body`), so folding them into the shared
+ * file would grow it for callers that never touch markup.
+ */
+import type { StoreEditor } from '@ifc-lite/mutations';
+/**
+ * Emit an `IfcPolyline` through 2D points, in order. When `close` is true
+ * and the input isn't already closed (first/last within epsilon), the first
+ * point is appended again — same auto-close rule `_emit-helpers.ts`'s
+ * `emitPolygonProfile` uses, minus the `IfcArbitraryClosedProfileDef`
+ * wrapper: markup curves are annotation geometry, not extrusion profiles.
+ */
+export declare function emitMarkupPolyline(editor: StoreEditor, points: ReadonlyArray<readonly [number, number]>, close: boolean): number;
+/**
+ * Emit an `IfcAxis2Placement2D` at a 2D point (no rotation) — the `Placement`
+ * a text literal needs.
+ */
+export declare function emitMarkupPoint2DPlacement(editor: StoreEditor, point: readonly [number, number]): number;
+/**
+ * Emit a fresh `IfcGeometricRepresentationSubContext` for markup geometry,
+ * chained to `parentContextId` (the model's root 3D
+ * `IfcGeometricRepresentationContext`). `targetView` is written verbatim
+ * into `TargetView` (dot-wrapped enum, e.g. `'PLAN_VIEW'` → `.PLAN_VIEW.`).
+ *
+ * `CoordinateSpaceDimension` / `Precision` / `WorldCoordinateSystem` /
+ * `TrueNorth` are DERIVE-redeclared on `IfcGeometricRepresentationSubContext`
+ * in the IFC4 EXPRESS schema (`Ifc4.RepresentationResource`) — not given
+ * their own values, but STEP still reserves their positional slots with the
+ * `*` derived-attribute token (`packages/export/src/step-serialization.ts`'s
+ * `serializeStepValue` passes a literal `'*'` through unquoted), which is
+ * how mainstream IFC exporters emit this entity.
+ */
+export declare function emitMarkupSubContext(editor: StoreEditor, parentContextId: number, targetView: 'PLAN_VIEW' | 'SECTION_VIEW', contextIdentifier?: string): number;
+/**
+ * Emit an `Annotation` `IfcShapeRepresentation` + `IfcProductDefinitionShape`
+ * wrapping one representation item, for `IfcAnnotation.Representation`.
+ */
+export declare function emitMarkupRepresentation(editor: StoreEditor, contextId: number, representationType: string, itemId: number): {
+    shapeRepId: number;
+    productShapeId: number;
+};
+//# sourceMappingURL=drawing-markup-geometry.d.ts.map

package/dist/in-store/drawing-markup-geometry.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"drawing-markup-geometry.d.ts","sourceRoot":"","sources":["../../src/in-store/drawing-markup-geometry.ts"],"names":[],"mappings":"AAIA;;;;;;;GAOG;AAEH,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,qBAAqB,CAAC;AAIvD;;;;;;GAMG;AACH,wBAAgB,kBAAkB,CAChC,MAAM,EAAE,WAAW,EACnB,MAAM,EAAE,aAAa,CAAC,SAAS,CAAC,MAAM,EAAE,MAAM,CAAC,CAAC,EAChD,KAAK,EAAE,OAAO,GACb,MAAM,CAcR;AAED;;;GAGG;AACH,wBAAgB,0BAA0B,CAAC,MAAM,EAAE,WAAW,EAAE,KAAK,EAAE,SAAS,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,MAAM,CAGxG;AAED;;;;;;;;;;;;;GAaG;AACH,wBAAgB,oBAAoB,CAClC,MAAM,EAAE,WAAW,EACnB,eAAe,EAAE,MAAM,EACvB,UAAU,EAAE,WAAW,GAAG,cAAc,EACxC,iBAAiB,SAAe,GAC/B,MAAM,CAaR;AAED;;;GAGG;AACH,wBAAgB,wBAAwB,CACtC,MAAM,EAAE,WAAW,EACnB,SAAS,EAAE,MAAM,EACjB,kBAAkB,EAAE,MAAM,EAC1B,MAAM,EAAE,MAAM,GACb;IAAE,UAAU,EAAE,MAAM,CAAC;IAAC,cAAc,EAAE,MAAM,CAAA;CAAE,CAahD"}

package/dist/in-store/drawing-markup-geometry.js

@@ -0,0 +1,80 @@
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at https://mozilla.org/MPL/2.0/. */
+const POINT_EPSILON = 1e-6;
+/**
+ * Emit an `IfcPolyline` through 2D points, in order. When `close` is true
+ * and the input isn't already closed (first/last within epsilon), the first
+ * point is appended again — same auto-close rule `_emit-helpers.ts`'s
+ * `emitPolygonProfile` uses, minus the `IfcArbitraryClosedProfileDef`
+ * wrapper: markup curves are annotation geometry, not extrusion profiles.
+ */
+export function emitMarkupPolyline(editor, points, close) {
+    if (points.length < 2) {
+        throw new Error('emitMarkupPolyline: needs at least 2 points');
+    }
+    let sequence = points;
+    if (close) {
+        const first = points[0];
+        const last = points[points.length - 1];
+        const alreadyClosed = Math.abs(first[0] - last[0]) < POINT_EPSILON && Math.abs(first[1] - last[1]) < POINT_EPSILON;
+        sequence = alreadyClosed ? points : [...points, first];
+    }
+    const pointIds = sequence.map((pt) => editor.addEntity('IfcCartesianPoint', [[pt[0], pt[1]]]).expressId);
+    return editor.addEntity('IfcPolyline', [pointIds.map((id) => `#${id}`)]).expressId;
+}
+/**
+ * Emit an `IfcAxis2Placement2D` at a 2D point (no rotation) — the `Placement`
+ * a text literal needs.
+ */
+export function emitMarkupPoint2DPlacement(editor, point) {
+    const originPt = editor.addEntity('IfcCartesianPoint', [[point[0], point[1]]]).expressId;
+    return editor.addEntity('IfcAxis2Placement2D', [`#${originPt}`, null]).expressId;
+}
+/**
+ * Emit a fresh `IfcGeometricRepresentationSubContext` for markup geometry,
+ * chained to `parentContextId` (the model's root 3D
+ * `IfcGeometricRepresentationContext`). `targetView` is written verbatim
+ * into `TargetView` (dot-wrapped enum, e.g. `'PLAN_VIEW'` → `.PLAN_VIEW.`).
+ *
+ * `CoordinateSpaceDimension` / `Precision` / `WorldCoordinateSystem` /
+ * `TrueNorth` are DERIVE-redeclared on `IfcGeometricRepresentationSubContext`
+ * in the IFC4 EXPRESS schema (`Ifc4.RepresentationResource`) — not given
+ * their own values, but STEP still reserves their positional slots with the
+ * `*` derived-attribute token (`packages/export/src/step-serialization.ts`'s
+ * `serializeStepValue` passes a literal `'*'` through unquoted), which is
+ * how mainstream IFC exporters emit this entity.
+ */
+export function emitMarkupSubContext(editor, parentContextId, targetView, contextIdentifier = 'Annotation') {
+    return editor.addEntity('IfcGeometricRepresentationSubContext', [
+        contextIdentifier,
+        'Model',
+        '*',
+        '*',
+        '*',
+        '*',
+        `#${parentContextId}`,
+        null,
+        `.${targetView}.`,
+        null,
+    ]).expressId;
+}
+/**
+ * Emit an `Annotation` `IfcShapeRepresentation` + `IfcProductDefinitionShape`
+ * wrapping one representation item, for `IfcAnnotation.Representation`.
+ */
+export function emitMarkupRepresentation(editor, contextId, representationType, itemId) {
+    const shapeRepId = editor.addEntity('IfcShapeRepresentation', [
+        `#${contextId}`,
+        'Annotation',
+        representationType,
+        [`#${itemId}`],
+    ]).expressId;
+    const productShapeId = editor.addEntity('IfcProductDefinitionShape', [
+        null,
+        null,
+        [`#${shapeRepId}`],
+    ]).expressId;
+    return { shapeRepId, productShapeId };
+}
+//# sourceMappingURL=drawing-markup-geometry.js.map

package/dist/in-store/drawing-markup-geometry.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"drawing-markup-geometry.js","sourceRoot":"","sources":["../../src/in-store/drawing-markup-geometry.ts"],"names":[],"mappings":"AAAA;;+DAE+D;AAa/D,MAAM,aAAa,GAAG,IAAI,CAAC;AAE3B;;;;;;GAMG;AACH,MAAM,UAAU,kBAAkB,CAChC,MAAmB,EACnB,MAAgD,EAChD,KAAc;IAEd,IAAI,MAAM,CAAC,MAAM,GAAG,CAAC,EAAE,CAAC;QACtB,MAAM,IAAI,KAAK,CAAC,6CAA6C,CAAC,CAAC;IACjE,CAAC;IACD,IAAI,QAAQ,GAA6C,MAAM,CAAC;IAChE,IAAI,KAAK,EAAE,CAAC;QACV,MAAM,KAAK,GAAG,MAAM,CAAC,CAAC,CAAC,CAAC;QACxB,MAAM,IAAI,GAAG,MAAM,CAAC,MAAM,CAAC,MAAM,GAAG,CAAC,CAAC,CAAC;QACvC,MAAM,aAAa,GACjB,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,aAAa,IAAI,IAAI,CAAC,GAAG,CAAC,KAAK,CAAC,CAAC,CAAC,GAAG,IAAI,CAAC,CAAC,CAAC,CAAC,GAAG,aAAa,CAAC;QAC/F,QAAQ,GAAG,aAAa,CAAC,CAAC,CAAC,MAAM,CAAC,CAAC,CAAC,CAAC,GAAG,MAAM,EAAE,KAAK,CAAC,CAAC;IACzD,CAAC;IACD,MAAM,QAAQ,GAAG,QAAQ,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,MAAM,CAAC,SAAS,CAAC,mBAAmB,EAAE,CAAC,CAAC,EAAE,CAAC,CAAC,CAAC,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC,CAAC;IACzG,OAAO,MAAM,CAAC,SAAS,CAAC,aAAa,EAAE,CAAC,QAAQ,CAAC,GAAG,CAAC,CAAC,EAAE,EAAE,EAAE,CAAC,IAAI,EAAE,EAAE,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC;AACrF,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,0BAA0B,CAAC,MAAmB,EAAE,KAAgC;IAC9F,MAAM,QAAQ,GAAG,MAAM,CAAC,SAAS,CAAC,mBAAmB,EAAE,CAAC,CAAC,KAAK,CAAC,CAAC,CAAC,EAAE,KAAK,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,CAAC,SAAS,CAAC;IACzF,OAAO,MAAM,CAAC,SAAS,CAAC,qBAAqB,EAAE,CAAC,IAAI,QAAQ,EAAE,EAAE,IAAI,CAAC,CAAC,CAAC,SAAS,CAAC;AACnF,CAAC;AAED;;;;;;;;;;;;;GAaG;AACH,MAAM,UAAU,oBAAoB,CAClC,MAAmB,EACnB,eAAuB,EACvB,UAAwC,EACxC,iBAAiB,GAAG,YAAY;IAEhC,OAAO,MAAM,CAAC,SAAS,CAAC,sCAAsC,EAAE;QAC9D,iBAAiB;QACjB,OAAO;QACP,GAAG;QACH,GAAG;QACH,GAAG;QACH,GAAG;QACH,IAAI,eAAe,EAAE;QACrB,IAAI;QACJ,IAAI,UAAU,GAAG;QACjB,IAAI;KACL,CAAC,CAAC,SAAS,CAAC;AACf,CAAC;AAED;;;GAGG;AACH,MAAM,UAAU,wBAAwB,CACtC,MAAmB,EACnB,SAAiB,EACjB,kBAA0B,EAC1B,MAAc;IAEd,MAAM,UAAU,GAAG,MAAM,CAAC,SAAS,CAAC,wBAAwB,EAAE;QAC5D,IAAI,SAAS,EAAE;QACf,YAAY;QACZ,kBAAkB;QAClB,CAAC,IAAI,MAAM,EAAE,CAAC;KACf,CAAC,CAAC,SAAS,CAAC;IACb,MAAM,cAAc,GAAG,MAAM,CAAC,SAAS,CAAC,2BAA2B,EAAE;QACnE,IAAI;QACJ,IAAI;QACJ,CAAC,IAAI,UAAU,EAAE,CAAC;KACnB,CAAC,CAAC,SAAS,CAAC;IACb,OAAO,EAAE,UAAU,EAAE,cAAc,EAAE,CAAC;AACxC,CAAC"}

package/dist/in-store/drawing-markup-tags.d.ts

@@ -0,0 +1,29 @@
+/**
+ * Round-trip tag values for 2D drawing markup translated into IFC by
+ * `drawing-markup.ts`. Stamped into `IfcAnnotation.ObjectType` — the same
+ * spot `generate-spaces.ts`'s `GENERATED_SPACE_OBJECTTYPE` uses to mark a
+ * baked `IfcSpace` as tool-generated.
+ *
+ * Without this, saved markup reads back through the generic symbolic-overlay
+ * parser as plain polylines/text/fills — visible, but no longer the typed
+ * `Measure2DResult` / `PolygonArea2DResult` / `TextAnnotation2D` /
+ * `CloudAnnotation2D` it started as, and no longer editable as one.
+ *
+ * Exported from this ONE place so a future read-side translator (issue
+ * #4153's read-back follow-up — not implemented here) imports these instead
+ * of re-declaring the string literals. Two independently-typed copies of the
+ * same tag is exactly the failure mode this exists to prevent: the writer
+ * tags with one spelling, the reader checks for another, and every saved
+ * annotation silently falls back to untyped overlay geometry.
+ */
+export declare const DRAWING_MARKUP_OBJECTTYPE: {
+    readonly MEASURE: "IfcLite:Markup:Measure";
+    readonly POLYGON_AREA: "IfcLite:Markup:PolygonArea";
+    readonly TEXT: "IfcLite:Markup:Text";
+    readonly CLOUD: "IfcLite:Markup:Cloud";
+};
+export type DrawingMarkupObjectType = (typeof DRAWING_MARKUP_OBJECTTYPE)[keyof typeof DRAWING_MARKUP_OBJECTTYPE];
+/** The derived-value quantity/property set names markup entities carry. */
+export declare const DRAWING_MARKUP_QSET_NAME = "Qto_IfcLiteMarkup";
+export declare const DRAWING_MARKUP_PSET_NAME = "Pset_IfcLiteMarkup";
+//# sourceMappingURL=drawing-markup-tags.d.ts.map

package/dist/in-store/drawing-markup-tags.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"drawing-markup-tags.d.ts","sourceRoot":"","sources":["../../src/in-store/drawing-markup-tags.ts"],"names":[],"mappings":"AAIA;;;;;;;;;;;;;;;;;GAiBG;AACH,eAAO,MAAM,yBAAyB;;;;;CAK5B,CAAC;AAEX,MAAM,MAAM,uBAAuB,GACjC,CAAC,OAAO,yBAAyB,CAAC,CAAC,MAAM,OAAO,yBAAyB,CAAC,CAAC;AAE7E,2EAA2E;AAC3E,eAAO,MAAM,wBAAwB,sBAAsB,CAAC;AAC5D,eAAO,MAAM,wBAAwB,uBAAuB,CAAC"}

package/dist/in-store/drawing-markup-tags.js

@@ -0,0 +1,31 @@
+/* This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at https://mozilla.org/MPL/2.0/. */
+/**
+ * Round-trip tag values for 2D drawing markup translated into IFC by
+ * `drawing-markup.ts`. Stamped into `IfcAnnotation.ObjectType` — the same
+ * spot `generate-spaces.ts`'s `GENERATED_SPACE_OBJECTTYPE` uses to mark a
+ * baked `IfcSpace` as tool-generated.
+ *
+ * Without this, saved markup reads back through the generic symbolic-overlay
+ * parser as plain polylines/text/fills — visible, but no longer the typed
+ * `Measure2DResult` / `PolygonArea2DResult` / `TextAnnotation2D` /
+ * `CloudAnnotation2D` it started as, and no longer editable as one.
+ *
+ * Exported from this ONE place so a future read-side translator (issue
+ * #4153's read-back follow-up — not implemented here) imports these instead
+ * of re-declaring the string literals. Two independently-typed copies of the
+ * same tag is exactly the failure mode this exists to prevent: the writer
+ * tags with one spelling, the reader checks for another, and every saved
+ * annotation silently falls back to untyped overlay geometry.
+ */
+export const DRAWING_MARKUP_OBJECTTYPE = {
+    MEASURE: 'IfcLite:Markup:Measure',
+    POLYGON_AREA: 'IfcLite:Markup:PolygonArea',
+    TEXT: 'IfcLite:Markup:Text',
+    CLOUD: 'IfcLite:Markup:Cloud',
+};
+/** The derived-value quantity/property set names markup entities carry. */
+export const DRAWING_MARKUP_QSET_NAME = 'Qto_IfcLiteMarkup';
+export const DRAWING_MARKUP_PSET_NAME = 'Pset_IfcLiteMarkup';
+//# sourceMappingURL=drawing-markup-tags.js.map

package/dist/in-store/drawing-markup-tags.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"drawing-markup-tags.js","sourceRoot":"","sources":["../../src/in-store/drawing-markup-tags.ts"],"names":[],"mappings":"AAAA;;+DAE+D;AAE/D;;;;;;;;;;;;;;;;;GAiBG;AACH,MAAM,CAAC,MAAM,yBAAyB,GAAG;IACvC,OAAO,EAAE,wBAAwB;IACjC,YAAY,EAAE,4BAA4B;IAC1C,IAAI,EAAE,qBAAqB;IAC3B,KAAK,EAAE,sBAAsB;CACrB,CAAC;AAKX,2EAA2E;AAC3E,MAAM,CAAC,MAAM,wBAAwB,GAAG,mBAAmB,CAAC;AAC5D,MAAM,CAAC,MAAM,wBAAwB,GAAG,oBAAoB,CAAC"}

package/dist/in-store/drawing-markup.d.ts

@@ -0,0 +1,184 @@
+/**
+ * Translate 2D drawing markup (issue #4153's "save into the model" option)
+ * into IFC entities via the additive `StoreEditor` overlay — modelled on
+ * `space.ts`'s `addSpaceToStore`.
+ *
+ * WRITE SIDE ONLY. This module has no UI wiring and does not import or edit
+ * `apps/viewer/src/store/slices/drawing2DSlice.ts` — a "save into model"
+ * action, and the read-side translator that recognises
+ * `DRAWING_MARKUP_OBJECTTYPE` and rehydrates `Drawing2DState`, are both
+ * future follow-ups. The param shapes below (`MarkupPoint2D`,
+ * `MeasureMarkupParams`, …) intentionally mirror `Drawing2DState`'s arrays
+ * structurally without importing `apps/viewer` — a published package
+ * (`@ifc-lite/create`) cannot depend on the app.
+ *
+ * Geometry frame: every point is treated as already resolved into the
+ * target `IfcGeometricRepresentationSubContext`'s 2D plane, in METRES —
+ * the same "drawing units (typically meters)" `Drawing2DState`'s own
+ * comments describe. Reprojecting a plan/section drawing's local 2D
+ * coordinates into that frame (accounting for the `SectionConfig` cut
+ * plane) is a UI/wiring concern for the future "save into model" action,
+ * not this translation layer.
+ *
+ * Additive by construction, same guarantee `StoreEditor.addEntity` documents:
+ * every call only APPENDS overlay entities (new `IfcAnnotation` +
+ * geometry + property/quantity sets); nothing existing is read, mutated,
+ * or renumbered.
+ */
+import { type RandomSource } from '@ifc-lite/encoding';
+import type { StoreEditor } from '@ifc-lite/mutations';
+import type { SpatialAnchorSchema } from './anchor.js';
+export { DRAWING_MARKUP_OBJECTTYPE, DRAWING_MARKUP_PSET_NAME, DRAWING_MARKUP_QSET_NAME, type DrawingMarkupObjectType, } from './drawing-markup-tags.js';
+/** A 2D point in drawing space (metres). Structurally matches `Drawing2DState`'s `Point2D`. */
+export interface MarkupPoint2D {
+    x: number;
+    y: number;
+}
+/**
+ * Placement/unit context shared by every markup builder — the subset of
+ * `SpatialAnchor` (`anchor.ts`) markup needs. Deliberately narrower than the
+ * full `SpatialAnchor`: markup has no Body/Axis solid geometry, so it needs
+ * no `bodyContextId`/`axisContextId`.
+ */
+export interface MarkupAnchor {
+    /** IfcOwnerHistory expressId, or null when the model has none (see `SpatialAnchor`). */
+    ownerHistoryId: number | null;
+    /** The IfcLocalPlacement each markup annotation's own placement chains from
+     *  (typically the target storey's placement, from `resolveSpatialAnchor`). */
+    storeyPlacementId: number;
+    /** Target schema; see `SpatialAnchor.schema`. Defaults to IFC4. */
+    schema?: SpatialAnchorSchema;
+    /** Model length-unit scale (metres per native unit); see `SpatialAnchor.lengthUnitScale`. */
+    lengthUnitScale?: number;
+    /** Optional seeded randomness for emitted GlobalIds; see `SpatialAnchor.guidRandom`. */
+    guidRandom?: RandomSource;
+}
+export interface MeasureMarkupParams {
+    start: MarkupPoint2D;
+    end: MarkupPoint2D;
+    /** Measured distance, metres — preserved verbatim so a reader restores it
+     *  without recomputing from the (possibly re-projected) polyline. */
+    distance: number;
+    Name?: string;
+}
+export interface MeasureMarkupResult {
+    annotationId: number;
+    placementId: number;
+    polylineId: number;
+    shapeRepId: number;
+    productShapeId: number;
+}
+export interface PolygonAreaMarkupParams {
+    /** Closed polygon vertices, drawing coords (metres). */
+    points: MarkupPoint2D[];
+    area: number;
+    perimeter: number;
+    Name?: string;
+}
+export interface PolygonAreaMarkupResult {
+    annotationId: number;
+    placementId: number;
+    polylineId: number;
+    shapeRepId: number;
+    productShapeId: number;
+}
+export interface TextMarkupParams {
+    /** Top-left corner, drawing coords (metres). */
+    position: MarkupPoint2D;
+    text: string;
+    /** IfcPlanarExtent (SizeInX, SizeInY), metres. Defaults are a nominal box —
+     *  a future "save into model" action should size this from the on-screen
+     *  layout, since `fontSize` alone doesn't determine a world-space extent. */
+    extent?: {
+        sizeX: number;
+        sizeY: number;
+    };
+    boxAlignment?: string;
+    Name?: string;
+}
+export interface TextMarkupResult {
+    annotationId: number;
+    placementId: number;
+    textLiteralId: number;
+    shapeRepId: number;
+    productShapeId: number;
+}
+export interface CloudMarkupParams {
+    /** Rectangle corners, drawing coords (metres): [topLeft, bottomRight]. */
+    points: readonly [MarkupPoint2D, MarkupPoint2D];
+    label: string;
+    Name?: string;
+}
+export interface CloudMarkupResult {
+    annotationId: number;
+    placementId: number;
+    polylineId: number;
+    fillAreaId: number;
+    shapeRepId: number;
+    productShapeId: number;
+}
+/** A polyline annotation for one `Measure2DResult`. Distance is preserved as
+ *  a LENGTH quantity (native length unit, matching every other in-store
+ *  builder's LENGTH convention — see `space.ts`'s `GrossPerimeter`) rather
+ *  than recomputed from the two endpoints on read-back. */
+export declare function addMeasureMarkupToStore(editor: StoreEditor, anchor: MarkupAnchor, contextId: number, params: MeasureMarkupParams): MeasureMarkupResult;
+/** A closed polyline annotation for one `PolygonArea2DResult`. Area/perimeter
+ *  preserved so a reader doesn't recompute a shoelace sum from re-projected
+ *  points (area is SI m², not unit-scaled — same split `space.ts` uses for
+ *  AREA vs LENGTH quantities). */
+export declare function addPolygonAreaMarkupToStore(editor: StoreEditor, anchor: MarkupAnchor, contextId: number, params: PolygonAreaMarkupParams): PolygonAreaMarkupResult;
+/** An `IfcTextLiteralWithExtent` annotation for one `TextAnnotation2D`. The
+ *  literal string is the derived value here — it lives in `Literal` itself,
+ *  the same field the read-side symbolic parser already consumes, so no
+ *  separate property-set copy is needed (unlike distance/area/perimeter,
+ *  which have nowhere else to live). `fontSize`/colors are display-only
+ *  presentation state, not a derived value this issue asks to preserve, and
+ *  are left for a future presentation-style follow-up. */
+export declare function addTextMarkupToStore(editor: StoreEditor, anchor: MarkupAnchor, contextId: number, params: TextMarkupParams): TextMarkupResult;
+/**
+ * An `IfcAnnotationFillArea` annotation for one `CloudAnnotation2D`.
+ *
+ * Chose fill-area over a bare polyline because a revision cloud is
+ * semantically a bounded REGION (its two stored points are a rectangle's
+ * corners, not an open path), and `IfcAnnotationFillArea` is what the read
+ * side's own symbolic parser already recognises as a fill (`AnnotationFill2D`
+ * in `apps/viewer/src/lib/overlay-parse/symbolic-shapes.ts`) — a bare
+ * polyline would render as an outline only, losing the "this is a cloud
+ * region" distinction a reader needs to tell it apart from a measurement.
+ */
+export declare function addCloudMarkupToStore(editor: StoreEditor, anchor: MarkupAnchor, contextId: number, params: CloudMarkupParams): CloudMarkupResult;
+/** Batch input mirroring the four markup arrays on `Drawing2DState`
+ *  (`apps/viewer/src/store/slices/drawing2DSlice.ts`) structurally, without
+ *  importing that module. `id` fields are accepted and ignored here — the
+ *  overlay expressId IS the new stable identity; carrying the old
+ *  browser-local id forward is a read-side/UI concern. */
+export interface DrawingMarkupBatchInput {
+    measure2DResults?: Array<{
+        id: string;
+    } & MeasureMarkupParams>;
+    polygonArea2DResults?: Array<{
+        id: string;
+    } & PolygonAreaMarkupParams>;
+    textAnnotations2D?: Array<{
+        id: string;
+    } & TextMarkupParams>;
+    cloudAnnotations2D?: Array<{
+        id: string;
+    } & CloudMarkupParams>;
+}
+export interface DrawingMarkupBatchResult {
+    subContextId: number;
+    measures: MeasureMarkupResult[];
+    polygons: PolygonAreaMarkupResult[];
+    texts: TextMarkupResult[];
+    clouds: CloudMarkupResult[];
+}
+/**
+ * Translate a full `Drawing2DState` markup snapshot into the store overlay:
+ * one shared `Annotation` `IfcGeometricRepresentationSubContext` (created
+ * fresh under `rootContextId`, the model's root 3D
+ * `IfcGeometricRepresentationContext`), then one `IfcAnnotation` per markup
+ * item, tagged per {@link DRAWING_MARKUP_OBJECTTYPE}.
+ */
+export declare function addDrawingMarkupToStore(editor: StoreEditor, anchor: MarkupAnchor, rootContextId: number, input: DrawingMarkupBatchInput, targetView?: 'PLAN_VIEW' | 'SECTION_VIEW'): DrawingMarkupBatchResult;
+//# sourceMappingURL=drawing-markup.d.ts.map

package/dist/in-store/drawing-markup.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"drawing-markup.d.ts","sourceRoot":"","sources":["../../src/in-store/drawing-markup.ts"],"names":[],"mappings":"AAIA;;;;;;;;;;;;;;;;;;;;;;;;;;GA0BG;AAEH,OAAO,EAAmB,KAAK,YAAY,EAAE,MAAM,oBAAoB,CAAC;AACxE,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,qBAAqB,CAAC;AACvD,OAAO,KAAK,EAAE,mBAAmB,EAAE,MAAM,aAAa,CAAC;AAWvD,OAAO,EACL,yBAAyB,EACzB,wBAAwB,EACxB,wBAAwB,EACxB,KAAK,uBAAuB,GAC7B,MAAM,0BAA0B,CAAC;AAElC,+FAA+F;AAC/F,MAAM,WAAW,aAAa;IAC5B,CAAC,EAAE,MAAM,CAAC;IACV,CAAC,EAAE,MAAM,CAAC;CACX;AAED;;;;;GAKG;AACH,MAAM,WAAW,YAAY;IAC3B,wFAAwF;IACxF,cAAc,EAAE,MAAM,GAAG,IAAI,CAAC;IAC9B;kFAC8E;IAC9E,iBAAiB,EAAE,MAAM,CAAC;IAC1B,mEAAmE;IACnE,MAAM,CAAC,EAAE,mBAAmB,CAAC;IAC7B,6FAA6F;IAC7F,eAAe,CAAC,EAAE,MAAM,CAAC;IACzB,wFAAwF;IACxF,UAAU,CAAC,EAAE,YAAY,CAAC;CAC3B;AAED,MAAM,WAAW,mBAAmB;IAClC,KAAK,EAAE,aAAa,CAAC;IACrB,GAAG,EAAE,aAAa,CAAC;IACnB;yEACqE;IACrE,QAAQ,EAAE,MAAM,CAAC;IACjB,IAAI,CAAC,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,mBAAmB;IAClC,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,uBAAuB;IACtC,wDAAwD;IACxD,MAAM,EAAE,aAAa,EAAE,CAAC;IACxB,IAAI,EAAE,MAAM,CAAC;IACb,SAAS,EAAE,MAAM,CAAC;IAClB,IAAI,CAAC,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,uBAAuB;IACtC,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,gBAAgB;IAC/B,gDAAgD;IAChD,QAAQ,EAAE,aAAa,CAAC;IACxB,IAAI,EAAE,MAAM,CAAC;IACb;;iFAE6E;IAC7E,MAAM,CAAC,EAAE;QAAE,KAAK,EAAE,MAAM,CAAC;QAAC,KAAK,EAAE,MAAM,CAAA;KAAE,CAAC;IAC1C,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,IAAI,CAAC,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,gBAAgB;IAC/B,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,aAAa,EAAE,MAAM,CAAC;IACtB,UAAU,EAAE,MAAM,CAAC;IACnB,cAAc,EAAE,MAAM,CAAC;CACxB;AAED,MAAM,WAAW,iBAAiB;IAChC,0EAA0E;IAC1E,MAAM,EAAE,SAAS,CAAC,aAAa,EAAE,aAAa,CAAC,CAAC;IAChD,KAAK,EAAE,MAAM,CAAC;IACd,IAAI,CAAC,EAAE,MAAM,CAAC;CACf;AAED,MAAM,WAAW,iBAAiB;IAChC,YAAY,EAAE,MAAM,CAAC;IACrB,WAAW,EAAE,MAAM,CAAC;IACpB,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,UAAU,EAAE,MAAM,CAAC;IACnB,cAAc,EAAE,MAAM,CAAC;CACxB;AAuDD;;;2DAG2D;AAC3D,wBAAgB,uBAAuB,CACrC,MAAM,EAAE,WAAW,EACnB,MAAM,EAAE,YAAY,EACpB,SAAS,EAAE,MAAM,EACjB,MAAM,EAAE,mBAAmB,GAC1B,mBAAmB,CAmBrB;AAED;;;kCAGkC;AAClC,wBAAgB,2BAA2B,CACzC,MAAM,EAAE,WAAW,EACnB,MAAM,EAAE,YAAY,EACpB,SAAS,EAAE,MAAM,EACjB,MAAM,EAAE,uBAAuB,GAC9B,uBAAuB,CAqBzB;AAED;;;;;;0DAM0D;AAC1D,wBAAgB,oBAAoB,CAClC,MAAM,EAAE,WAAW,EACnB,MAAM,EAAE,YAAY,EACpB,SAAS,EAAE,MAAM,EACjB,MAAM,EAAE,gBAAgB,GACvB,gBAAgB,CAqBlB;AAED;;;;;;;;;;GAUG;AACH,wBAAgB,qBAAqB,CACnC,MAAM,EAAE,WAAW,EACnB,MAAM,EAAE,YAAY,EACpB,SAAS,EAAE,MAAM,EACjB,MAAM,EAAE,iBAAiB,GACxB,iBAAiB,CAsBnB;AAED;;;;0DAI0D;AAC1D,MAAM,WAAW,uBAAuB;IACtC,gBAAgB,CAAC,EAAE,KAAK,CAAC;QAAE,EAAE,EAAE,MAAM,CAAA;KAAE,GAAG,mBAAmB,CAAC,CAAC;IAC/D,oBAAoB,CAAC,EAAE,KAAK,CAAC;QAAE,EAAE,EAAE,MAAM,CAAA;KAAE,GAAG,uBAAuB,CAAC,CAAC;IACvE,iBAAiB,CAAC,EAAE,KAAK,CAAC;QAAE,EAAE,EAAE,MAAM,CAAA;KAAE,GAAG,gBAAgB,CAAC,CAAC;IAC7D,kBAAkB,CAAC,EAAE,KAAK,CAAC;QAAE,EAAE,EAAE,MAAM,CAAA;KAAE,GAAG,iBAAiB,CAAC,CAAC;CAChE;AAED,MAAM,WAAW,wBAAwB;IACvC,YAAY,EAAE,MAAM,CAAC;IACrB,QAAQ,EAAE,mBAAmB,EAAE,CAAC;IAChC,QAAQ,EAAE,uBAAuB,EAAE,CAAC;IACpC,KAAK,EAAE,gBAAgB,EAAE,CAAC;IAC1B,MAAM,EAAE,iBAAiB,EAAE,CAAC;CAC7B;AAED;;;;;;GAMG;AACH,wBAAgB,uBAAuB,CACrC,MAAM,EAAE,WAAW,EACnB,MAAM,EAAE,YAAY,EACpB,aAAa,EAAE,MAAM,EACrB,KAAK,EAAE,uBAAuB,EAC9B,UAAU,GAAE,WAAW,GAAG,cAA4B,GACrD,wBAAwB,CAO1B"}