@hyzyn/dsh-tty 0.31.0 → 0.32.0

package/README.en.md

@@ -136,11 +136,22 @@ Both were reproduced on **Windows 11 ARM (24H2) + Node 22 ARM64**. The fix:
   no new prompt, looking like “it was sent but never ran”). For **local sessions on win32** the plugin now
   turns a bare LF into CRLF (an existing CRLF is not doubled; non-Windows and SSH sessions pass through
   untouched), so the documented `\n` path just works;
-- **Three things are not supported** (the host turns them off and the settings card explains why):
-  - **Shell integration (OSC 133/7)**: injection relies on POSIX rc stubs plus the `-c` wrapper, neither of
-    which exists for cmd / PowerShell, so it is permanently off — **local** tabs therefore lose cwd tracking
-    (`tty_list.cwd` following `cd`), `tty_capture{last}` and command-granular `tty_expect` (remote Linux /
-    macOS hosts are unaffected);
+- **Shell integration (OSC 133/7) depends on the shell family**: the **PowerShell family is supported**
+  (`powershell.exe` / `pwsh.exe`) through a stable `-File` stub that hooks `prompt` and
+  `PSConsoleHostReadLine` — this yields cwd tracking (`tty_list.cwd` following `cd`), exit codes, the
+  `running` state and command-granular `tty_expect`. **cmd is not** (it has no command-boundary hooks), so
+  the settings card greys the switch out and points at “switch the shell path to PowerShell”. **Known
+  limit**: on PowerShell 7 the command output reaches ConPTY *after* the D marker (pane redraws are
+  asynchronous and batched — the same root cause as in the tmux case), so `tty_capture{last}` may come back
+  empty; use `tty_capture` to read the tail there. Windows PowerShell 5.1 is unaffected (both were measured
+  on a real machine). The stub only loads through `-ExecutionPolicy Bypass` (process-scoped); two boundaries
+  are recorded as they are: when **Group Policy** locks the execution policy to Restricted / AllSigned that
+  parameter does **not** override GPO, so the stub fails to load and the tab opens with integration silently
+  absent (the same degradation as “the user turned PSReadLine off”); the parameter also writes the value into
+  `$Env:PSExecutionPolicyPreference`, which PowerShell processes started from that session inherit. One more
+  known side effect: wrapping `prompt` makes **the user’s original prompt see its own `$?`** as the result of
+  our writes (always true), so failure indicators that rely on `$?` stop working;
+- **Two things are not supported** (the host turns them off and the settings card explains why):
   - **tmux persistence**: there is no tmux on Windows, so local tabs open normally but are not managed
     (SSH into a Linux host still works);
   - **Server status bar**: locally only CPU / memory / uptime are available (`node:os`); disk / TCP / network
@@ -154,7 +165,13 @@ Both were reproduced on **Windows 11 ARM (24H2) + Node 22 ARM64**. The fix:
 - **End-to-end coverage (0.19.0)**: `scripts/windows-smoke.mjs` drives a real `cmd.exe` through
   spawn → input echo → kill → respawn on the CI windows-latest runner, plus two links that only hold on
   a real machine (W6: after normalisation a bare LF really does submit in conhost, D74; W7: a `command`
-  session that exits turns into read-only retention and `tty_capture` still reads its pre-exit output, D77). It caught and now pins a
+  session that exits turns into read-only retention and `tty_capture` still reads its pre-exit output, D77).
+  **W8 (the PowerShell OSC 133/7 stage) runs on CI** (since 2026-10-13): it used to be guarded by the
+  **real-machine lane** only, because killing a ConPTY session there tripped `0xC0000374` — the root cause
+  (the same PTY being natively `kill()`ed twice) is now located and fixed, see **D100** in
+  [DEFECTS.md](./DEFECTS.md) and the 2026-10-13 section of [ROADMAP.md](./ROADMAP.md). Where no PowerShell
+  exists the stage honestly reports its own `SKIP` row (excluded from the denominator, never dressed up as
+  `12/12`). It caught and now pins a
   Windows-only failure class: force-killing a local PTY crashed the host — node-pty rejects signals
   on Windows, and its `_deferNoArgs` re-throws that error from a socket callback, where the caller’s
   try/catch cannot see it.
@@ -165,7 +182,7 @@ The plugin injects nineteen tools into the agent (operations show up live in the
 
 | Tool | Purpose |
 | --- | --- |
-| `tty_list` | List terminal sessions (sid / kind (`local\|ssh`) / target / pid / **cwd tracked live as you `cd`** / activity time; tmux persistent sessions carry a `persist` marker; sessions the agent opened carry `owner: 'agent'`). **Includes sessions whose process has exited but which are still inside their read-only retention window** (`exited:true` + exit code/signal, see below). **`running` says whether a command is currently executing** (true = it is: do not send into it now; false = the command has finished; **omitted = cannot tell** — non-persistent SSH / fish·csh / Windows local sessions carry no shell-integration markers, which is *not* the same as “idle”), and the same-source `lastExitCode` / `lastExitAt` are the exit code and end time of “the previous completed command” (0.23.0). The rendered text spells the three states `[空闲]` / `[运行中——现在别往里发命令]` / `[命令状态未知——…]`; **“unknown” also covers one more case** — the host has seen **no marker for that session since this boot** (typically a tmux persistent session already sitting at its prompt before the host restarted): send it a bare Enter or run a command and the marker arrives, turning it into `[空闲]`; non-persistent SSH / fish·csh / Windows local sessions never emit markers, so `[命令状态未知]` is their normal state |
+| `tty_list` | List terminal sessions (sid / kind (`local\|ssh`) / target / pid / **cwd tracked live as you `cd`** / activity time; tmux persistent sessions carry a `persist` marker; sessions the agent opened carry `owner: 'agent'`). **Includes sessions whose process has exited but which are still inside their read-only retention window** (`exited:true` + exit code/signal, see below). **`running` says whether a command is currently executing** (true = it is: do not send into it now; false = the command has finished; **omitted = cannot tell** — non-persistent SSH / fish·csh / Windows cmd sessions carry no shell-integration markers, which is *not* the same as “idle”), and the same-source `lastExitCode` / `lastExitAt` are the exit code and end time of “the previous completed command” (0.23.0). The rendered text spells the three states `[空闲]` / `[运行中——现在别往里发命令]` / `[命令状态未知——…]`; **“unknown” also covers one more case** — the host has seen **no marker for that session since this boot** (typically a tmux persistent session already sitting at its prompt before the host restarted): send it a bare Enter or run a command and the marker arrives, turning it into `[空闲]`; non-persistent SSH / fish·csh / Windows cmd sessions never emit markers, so `[命令状态未知]` is their normal state |
 | `tty_open` | **Open a terminal session yourself** (0.20.0): a local shell, or a command via `command` (dev server / watch; it runs as **a whole piece of code in the host shell’s syntax** — on a POSIX shell `cd x && cmd`, `a; b` and multi-line scripts work, while **Windows cmd / PowerShell use their own syntax**; the current shell and syntax are restated every turn in the systemPrompt terminal line; it is *not* subject to the “single line ≤2000” client rule below — D78), with optional tmux persistence via `persistName`. The session **shows up in the user’s terminal panel** as an ordinary tab the user can see and take over — never a hidden session |
 | `tty_close` | Close a session opened by `tty_open` (0.20.0). **Only the agent’s own sessions may be closed**: a tab the user opened is refused, so the agent never ends a terminal the user is working in. It also works on an **exited session that is still in read-only retention** — that is its release entry point (by default it is retained **until explicitly closed**, never on a timer) |
 | `tty_run` | **One-shot command** (0.23.0): open a session, run `command`, wait for it to finish and return the tail output + exit code directly — collapsing “`tty_open` → wait → `tty_capture{last}` → `tty_close`” into a single call. It **closes the session once the command finishes** by default (the result is already in this call); `keep:true` leaves it in read-only retention instead. If it is still running at `timeoutSec` (1~600, default 120) it returns `running:true` and **does not kill the session** (whether to keep waiting or close it is the caller’s call). When to use this instead of the bash tool: when the user should **see** the command, or when it must run inside a terminal session; for purely non-interactive commands bash is more direct |
@@ -257,7 +274,9 @@ This is why “`tty_open` a command that finishes and read the result afterwards
 
 ### Shell integration (OSC 133/7, 0.4.0)
 
-At spawn time hooks are injected through the existing `-c` wrapper layer according to the shell type (transparent to the user, no rc changes):
+On POSIX, hooks are injected through the existing `-c` wrapper layer according to the shell type; on
+Windows the PowerShell family gets a stable `-File` stub instead (see the Windows section above). Both are
+transparent to the user and change no rc:
 
 - **zsh**: `ZDOTDIR` points at a temporary stub directory (the same approach VS Code uses); the stub sources
   the user’s original rc first and then appends `precmd`/`preexec` hooks;
@@ -279,8 +298,9 @@ buffer). The look-back lower bound is raised to “just after the last `B` marke
 the echo sits between `A` and `B`, so text in the echo never counts as a hit (deliberately no text
 comparison here: line wrapping / ANSI / multi-line paste would break it).
 
-- **Environments without `B` markers** (integration off / local Windows tabs / a remote host without the
-  hooks) have no boundary to cut at, so since D75 the echo is excluded by a different test: the command
+- **Environments without `B` markers** (integration off / local Windows cmd tabs / a remote host without
+  the hooks / PSReadLine turned off by the user) have no boundary to cut at, so since D75 the echo is
+  excluded by a different test: the command
   lines that the most recent `tty_send` submitted are stripped out of the candidate text and the pattern
   is retried — only “no longer matches after stripping” counts as a pure echo. That removes the false
   positive where the command never ran yet the wait reported `matched:true`, while the same text really
@@ -845,7 +865,7 @@ sub-page under the Plugins sidebar, and `≤0.1.5` uses the settings-page card.
 | `reconnectGraceSec` | 120 | Seconds a session is kept alive after an abnormal disconnect (0~3600): the session survives a page refresh/network blip waiting for a reconnect, and the reaper ends it on timeout; `0` = the old behavior, end immediately on disconnect |
 | `sshHosts` | `[]` | SSH connection book (selectable in the panel “+” menu): entries `{name, host, port=22, username, auth=agent\|key\|password, keyPath, passphrase, password, agentForward, hostKeyAlias='', persist=false}`; saved as a whole-set replacement, the same name overwrites; `password` / `passphrase` support `env:VAR` references so no plaintext is stored; with persistence on, clicking an entry opens a tmux persistent session by default, and `persist=false` is an **opt-out**; an empty `hostKeyAlias` locates fingerprints by host address (TOFU), while a non-empty one locates them by alias (several addresses of one host share a record — see “SSH connections”) |
 | `hostKeys` | `[]` | SSH host key records (TOFU, maintained automatically): entries `{host, port, fingerprints[]}` (the legacy single `fingerprint` field is migrated and merged on read); unique by host:port, one record holds all of a host’s keys, appended automatically on the first connection, any matching fingerprint is allowed, and a full mismatch rejects the connection; the settings card can delete them to reset |
-| `shellIntegration` | true | Injects the OSC 133/7 shell integration (command boundary markers + cwd reporting; `tty_capture{last}` depends on it); zsh/bash supported, other shells skipped automatically; can be turned off when compatibility problems appear |
+| `shellIntegration` | true | Injects the OSC 133/7 shell integration (command boundary markers + cwd reporting; `tty_capture{last}` depends on it); zsh/bash on POSIX and the PowerShell family on Windows (`-File` stub), other shells (including Windows cmd) skipped automatically; can be turned off when compatibility problems appear |
 | `tunnels` | `[]` | Port-forwarding tunnels: entries `{name, bookName, direction=local\|remote, localPort?, remoteHost?, remotePort?, localTargetHost?, localTargetPort?, enabled}`; `bookName` references a connection-book entry for host and authentication; maintained graphically in the “Port forwarding” block of the card |
 | `sftpStyle` | `dialog` | SFTP File Browser UI style: `dialog` single pane (remote directory + upload/download/drag & drop) / `dual` two panes (local left / remote right, inline `⇨/⇦` server-side direct transfer); reopen SFTP for it to take effect |
 | `persistence` | `off` | Session persistence: `off` sessions live and die with the host (default); `tmux` makes **every newly opened tab hosted by the tmux server by default**, recoverable across a host restart (requires tmux locally/remotely); the SSH dialog can opt out for a single connection |
@@ -1198,8 +1218,10 @@ verify things like “is there still a white panel after switching light/dark th
   only for `reconnectGraceSec` (120s by default), and a host process restart ends all sessions; sessions not
   reconnected before the deadline are ended by the reaper, and scroll history beyond the output buffer
   (last 256KB) cannot be recovered.
-- **Shell integration is zsh / bash only**: other shells are skipped automatically (`tty_capture{last}`
-  reports a clear error rather than a wrong one). bash < 4.4 uses the DEBUG trap fallback: internal commands
+- **Shell integration covers zsh / bash on POSIX and the PowerShell family on Windows**: other shells
+  (Windows cmd) are skipped automatically (`tty_capture{last}` reports a clear error rather than a wrong
+  one); on PowerShell 7 the command output can land after the D marker, so `tty_capture{last}` may be empty
+  there (read the tail with `tty_capture` instead). bash < 4.4 uses the DEBUG trap fallback: internal commands
   of compound commands such as loops emit extra B markers, and `tty_capture{last}` captures only the output
   after the last internal command for those commands (exit codes and `tty_expect` are unaffected). If the
   user’s rc overrides `PROMPT_COMMAND`/the hook array, the integration may stop working — turn off

package/README.md

@@ -124,10 +124,18 @@ dsh plugin --profile web add link:$(pwd)/packages/tty   # 仓库开发调试
   下移一格、**不提交命令行**——`tty_send` 按工具描述发 `echo X\n` 时命令停在输入行上（没有输出、
   没有新提示符，看起来像「发出去了但没执行」）。**win32 的本地会话**上插件现在把裸 LF 补成 CRLF
   （已经是 CRLF 的不重复补；非 Windows 与 SSH 会话原样透传），所以照描述写 `\n` 这条主路径直接可用；
-- **不支持的三项（宿主侧自动关掉，设置卡片里写明原因）**：
-  - **shell 集成（OSC 133/7）**：注入靠 POSIX rc 桩 + `-c` 包装层，cmd / PowerShell 上都不成立，
-    因此恒关 —— **本地标签**的 `tty_list.cwd` 跟随 `cd`、`tty_capture{last}` 与 `tty_expect`
-    的命令粒度不可用（远程 Linux / macOS 主机照旧支持）；
+- **shell 集成（OSC 133/7）按家族分**：**PowerShell 家族支持**（`powershell.exe` / `pwsh.exe`）——
+  注入走 `-File` 稳定桩（挂 `prompt` + `PSConsoleHostReadLine` 钩子），拿到 `tty_list.cwd` 跟随
+  `cd`、退出码、`running` 三态与命令粒度的 `tty_expect`；**cmd 不支持**（没有命令开始/结束钩子），
+  设置卡片把开关置灰并指向「把 Shell 路径换成 PowerShell」。**已知限制**：PowerShell 7 上命令输出
+  在 ConPTY 里晚于 D 标记抵达（渲染重画是异步批量的，与 tmux 场景同根因），`tty_capture{last}`
+  可能取到空 —— 那里用 `tty_capture` 读尾部；Windows PowerShell 5.1 不受影响（两版都真机实测过）。
+  桩靠 `-ExecutionPolicy Bypass`（进程级）才载得进来，两条边界如实记着：**组策略**把执行策略锁成
+  Restricted / AllSigned 时该参数压不过 GPO，桩载不进去、标签照开而集成静默失效（与「用户关了
+  PSReadLine」同一种降级）；这个参数还会把值写进 `$Env:PSExecutionPolicyPreference`，从该会话里
+  再起的 PowerShell 会继承它。另有一条已知副作用：包装 `prompt` 会让**用户原 prompt 读到的 `$?`**
+  变成我们那几次写入的成败（恒真），依赖 `$?` 的失败提示会失效；
+- **不支持的两项（宿主侧自动关掉，设置卡片里写明原因）**：
   - **tmux 持久化**：Windows 上没有 tmux，本地标签照常打开但不受托管（SSH 到 Linux 主机仍可用）；
   - **服务器状态条**：本地只拿得到 CPU / 内存 / 在线时长（`node:os`），磁盘 / TCP / 网速 / 温度
     显示「无」（**远端** Windows 主机走 PowerShell 那一跳，见「服务器状态条」一节）；
@@ -138,7 +146,11 @@ dsh plugin --profile web add link:$(pwd)/packages/tty   # 仓库开发调试
 - **端到端覆盖（0.19.0）**：`scripts/windows-smoke.mjs` 在 CI 的 windows-latest 上跑真实 `cmd.exe`
   的 spawn → 输入回显 → kill → 重开，外加两条只在真机上成立的链路（W6：`tty_send` 的裸 LF 经归一化
   后 conhost 真的执行了命令，D74；W7：`command` 型会话跑完退出后转只读保留、`tty_capture` 仍读得到
-  退出前的输出，D77）。它抓出并钉住了「强杀本地 PTY 会崩宿主」这类只在 Windows
+  退出前的输出，D77）。**W8（PowerShell 的 OSC 133/7 档）在 CI 上照常跑**（2026-10-13 起）：
+  它此前只在真机车道守，是因为「杀一个 ConPTY 会话」会踩 `0xC0000374`——根因（同一个 PTY 被原生
+  `kill()` 两次）已定位并修好，见 [DEFECTS.md](./DEFECTS.md) 的 **D100** 与
+  [ROADMAP.md](./ROADMAP.md) 的 2026-10-13 一节；本机找不到 PowerShell 时它会如实进 `SKIP` 一档
+  （分母扣掉、汇总行点名，不许装成 `12/12`）。它抓出并钉住了「强杀本地 PTY 会崩宿主」这类只在 Windows
   出现的问题——node-pty 在 Windows 上不接受 signal，而它的 `_deferNoArgs` 会把这个异常推迟到
   socket 回调里抛出，调用方的 try/catch 拦不住。
 
@@ -148,7 +160,7 @@ dsh plugin --profile web add link:$(pwd)/packages/tty   # 仓库开发调试
 
 | 工具 | 作用 |
 | --- | --- |
-| `tty_list` | 列出终端会话（sid / kind（local\|ssh）/ target / pid / **cwd 实时跟随 cd** / 活动时间；tmux 持久会话带 `persist` 标记；agent 自己开的带 `owner: 'agent'`）。**含进程已退出但仍在只读保留期内的会话**（`exited:true` + 退出码/信号，见下节）；**`running` 说明这个会话有没有命令在跑**（true = 在跑，现在别往里发命令；false = 命令已结束；**省略 = 无法判断**——非持久 SSH / fish·csh / Windows 本地没有 shell 集成标记，**不是**「没在跑」），同源的 `lastExitCode` / `lastExitAt` 是「上一条已完成命令」的退出码与结束时刻（0.23.0）。文本里三态写作 `[空闲]` / `[运行中——现在别往里发命令]` / `[命令状态未知——…]`；**「未知」还包含一种情形**：宿主**本次启动之后没见过该会话的标记**（典型是 tmux 持久会话在宿主重启前就停在提示符上）——对它发一个回车或跑一条命令，标记补上就变 `[空闲]`；而非持久 SSH / fish·csh / Windows 本地永远不会有标记，`[命令状态未知]` 是它们的常态 |
+| `tty_list` | 列出终端会话（sid / kind（local\|ssh）/ target / pid / **cwd 实时跟随 cd** / 活动时间；tmux 持久会话带 `persist` 标记；agent 自己开的带 `owner: 'agent'`）。**含进程已退出但仍在只读保留期内的会话**（`exited:true` + 退出码/信号，见下节）；**`running` 说明这个会话有没有命令在跑**（true = 在跑，现在别往里发命令；false = 命令已结束；**省略 = 无法判断**——非持久 SSH / fish·csh / Windows 的 cmd 没有 shell 集成标记，**不是**「没在跑」），同源的 `lastExitCode` / `lastExitAt` 是「上一条已完成命令」的退出码与结束时刻（0.23.0）。文本里三态写作 `[空闲]` / `[运行中——现在别往里发命令]` / `[命令状态未知——…]`；**「未知」还包含一种情形**：宿主**本次启动之后没见过该会话的标记**（典型是 tmux 持久会话在宿主重启前就停在提示符上）——对它发一个回车或跑一条命令，标记补上就变 `[空闲]`；而非持久 SSH / fish·csh / Windows 的 cmd 永远不会有标记，`[命令状态未知]` 是它们的常态 |
 | `tty_open` | **自己开一个终端会话**（0.20.0）：本地 shell，或 `command` 直接跑一条命令（dev server / watch；**按宿主 shell 的语法整段执行**——POSIX shell 上 `cd x && cmd`、`a; b`、多行脚本都可以；**Windows 的 cmd / PowerShell 则按它们自己的语法**，当前 shell 与语法每轮都写在 systemPrompt 的终端一行里；不受下面「命令标签单行 ≤2000」那条客户端约束，D78），`persistName` 可要 tmux 持久化。**开出来的会话出现在用户的终端面板里**（普通标签、用户可见可接管），不做隐形会话 |
 | `tty_close` | 关掉一个由 `tty_open` 开的会话（0.20.0）。**只允许关 agent 自己开的**：用户在面板里开的标签会被拒绝——agent 不越权结束用户正在用的终端。对**已退出但仍只读保留着**的会话同样可用——那是它的释放入口（默认**保留到显式关闭**，不按时间释放） |
 | `tty_run` | **一次性命令**（0.23.0）：开一个会话跑 `command`，等它结束，直接返回尾部输出 + 退出码——把「`tty_open` → 等 → `tty_capture{last}` → `tty_close`」四步压成一次调用。默认**跑完即关**（结果已在本次调用返回），`keep:true` 则留在只读保留态；到 `timeoutSec`（1~600，默认 120）还没结束就返回 `running:true` 且**不杀会话**（继续等或关掉由调用方决定）。何时用它而不是 bash 工具：需要用户**看得见**这条命令、或要跑在终端会话里时用它，纯非交互命令用 bash 更直接 |
@@ -228,7 +240,8 @@ dsh plugin --profile web add link:$(pwd)/packages/tty   # 仓库开发调试
 
 ### shell 集成（OSC 133/7，0.4.0）
 
-spawn 时经既有的 `-c` 包装层按 shell 类型注入钩子（对用户透明，不改 rc）：
+POSIX 上经既有的 `-c` 包装层按 shell 类型注入钩子，Windows 上走 PowerShell 的 `-File` 稳定桩
+（都对用户透明，不改 rc）：
 
 - **zsh**：`ZDOTDIR` 指向临时桩目录（VS Code 同款方案），桩文件先 source
   用户原 rc 再追加 `precmd`/`preexec` 钩子；
@@ -240,17 +253,26 @@ spawn 时经既有的 `-c` 包装层按 shell 类型注入钩子（对用户透
   副作用：循环体等复合命令的内部命令会多发 B 标记，仅影响
   `tty_capture{last}` 对这类命令的截取起点，D/退出码与 `tty_expect` 不受影响；
   PROMPT_COMMAND 挂钩兼容字符串与数组（bash 5.1+）两种形态；
+- **PowerShell（Windows）**：`-File` 稳定桩（`<DSH_HOME|~/.dsh>/tty[/<profile>]/shell/powershell/bootstrap.ps1`，
+  纯 ASCII —— Windows PowerShell 5.1 按当前 ANSI 代码页读无 BOM 的 .ps1，一个非 ASCII 字节就炸解析），
+  包装 `prompt` 与 `PSConsoleHostReadLine`；用户 profile 照常生效（桩在 profile **之后**载入，拿到的就是
+  用户自己那个 prompt，包装后原样调用）。退出码口径：B 时刻快照 `$LASTEXITCODE`、D 时刻**变了**才报它
+  （原生命令），否则按 `$?` 报 0/1（cmdlet）——刻意**不清空** `$LASTEXITCODE`，免得用户紧接着的
+  `echo $LASTEXITCODE` 读到空值；代价是连续两次同码的非零原生命令，第二次降级报 1。
+  拿不到原 `PSConsoleHostReadLine`（用户关了 PSReadLine）时**一个标记都不发**：只发 A/7 会让宿主
+  报「没在跑」，比「无法判断」更危险（D77）；
 - 标记语义：`133;A` prompt 开始 / `133;B` 命令开始 / `133;D;<exit>` 命令
   结束带退出码 / `OSC 7 file://…` cwd 上报（`tty_list.cwd` 跟随 `cd`，
   SSH 会话则上报远程路径）；
-- 其他 shell 静默关闭；配置 `shellIntegration: false` 可整体关掉（逃生门）。
+- 其他 shell（含 Windows 的 cmd）静默关闭；配置 `shellIntegration: false` 可整体关掉（逃生门）。
 
 **回溯匹配与已读水位线（D72）**：`tty_expect` 会先回看**还没被读过**的输出（命令瞬间跑完时
 要等的标记早就在缓冲区里了），回看的起点抬到「未读区内最后一个 `B` 标记之后」——回显落在 `A`
 与 `B` 之间，所以回显里的字样不会被当成命中（这里刻意不做文本比对：折行 / ANSI / 多行粘贴
 都会把它打碎）。
 
-- **没有 `B` 标记的环境**（未开集成 / Windows 本地标签 / 远端未装集成）没有边界可切，D75 起
+- **没有 `B` 标记的环境**（未开集成 / Windows 的 cmd 标签 / 远端未装集成 / 用户关了 PSReadLine）
+  没有边界可切，D75 起
   改用另一条判据剔除回显：把**最近 `tty_send` 提交过的命令行**从候选文本里削掉再试一次，
   只有「削掉后不再命中」才算纯回显——这样「命令没执行、等待却自称 matched」这条假阳性没了，
   而回显之后真的跑出来的同一段文本照旧命中。等满超时且 pattern 只命中过回显时，结果带