@hyzyn/dsh-tty 0.18.3 → 0.19.0

package/README.en.md

@@ -87,8 +87,9 @@ Both were reproduced on **Windows 11 ARM (24H2) + Node 22 ARM64**. The fix:
     throughput / temperature show “无” (remote **Windows** hosts go through the PowerShell hop — see the
     status-bar section);
 - **How far this was verified**: on Windows 11 ARM a full install (`dsh plugin add @hyzyn/dsh-all`), all nine
-  plugins mounting, `dsh web` serving, and the browser half being delivered (the same artifact macOS serves:
-  12,312,246 bytes, identical new-code markers), plus `[dsh-tty] mounted (shell=C:\WINDOWS\system32\cmd.exe)`.
+  plugins mounting, `dsh web` serving, and the browser half being delivered (the same artifact macOS serves;
+  size and new-code markers compared after a build rather than pinning a byte count, which changes on every
+  rebuild), plus `[dsh-tty] mounted (shell=C:\WINDOWS\system32\cmd.exe)`.
   x64 Windows is covered by the CI matrix (build / typecheck / test, see Development).
 
 ## Agent tools (P1)
@@ -252,7 +253,7 @@ slot (`ssh2`’s sftp subsystem, host half in `src/sftp.ts`):
   panel nor interrupts browsing); when another panel (such as the containers panel) already holds the slot on
   the same tab, or the panel is not open, it falls back to the original centered dialog, **without pushing
   anyone else’s panel out**. The title / collapse / ✕ come from tty’s mount slot;
-- **Follows the tab (0.18.4)**: the File Browser talks to the host of the tab that opened it, so it belongs to
+- **Follows the tab (0.19.0)**: the File Browser talks to the host of the tab that opened it, so it belongs to
   that tab: switching away hides it (in-flight transfers keep running and the scene is restored when you come
   back), and closing the tab tears it down. **Every entry follows the same rule** — the connection bar’s
   “SFTP”, the 📂 on a connection-book entry and “File Browser” in the SSH dialog / settings card all become
@@ -395,7 +396,13 @@ and the agent tools all reuse the same scheduling.
   “Terminal N”); while connecting it first echoes a grey `Connecting user@host …`, and once ready the status
   bar shows `SSH user@host connected`; a failed connection (connection timeout / authentication rejected /
   host unreachable) comes back in an `error` frame with the reason, and since the tab spec was saved with the
-  tab, clicking the terminal area reopens it from the original spec;
+  tab, clicking the terminal area reopens it from the original spec; the status bar describes the **currently
+  active tab** — switching or closing a tab immediately swaps in that tab’s own state (the failure reason and
+  the exit code are kept on the tab itself), so the red text no longer stays on screen after you close the tab
+  that could not connect (host-level messages such as “connection lost — reconnecting” belong to no tab and
+  are not wiped by a tab switch); conversely, **a background tab’s own failure is only recorded on that tab**
+  (its tab-bar status dot turns red and the terminal overlay carries the full text) and never takes over the
+  active tab’s status;
 - **Agent forwarding (0.4.0)**: with “agent forwarding” ticked in the SSH dialog, the remote side can use the
   local ssh-agent’s keys (such as `git clone` of a private repository remotely). It can be enabled with any
   authentication method (credentials still never touch disk); if no ssh-agent is running locally the
@@ -430,14 +437,17 @@ and the agent tools all reuse the same scheduling.
   box takes focus); the only difference is presentation — there it is an **inline** list rather than an overlay,
   because that card is a long scrollable form where an overlay would be clipped;
 - **Host-key TOFU pinning (0.3.0)**: after the first successful connection the host’s (host:port) sha256
-  fingerprint is recorded in `hostKeys` (persisted with settings); every later connection is verified, a
-  matching fingerprint is allowed, and **a changed fingerprint rejects the connection outright** (defense
-  against impersonation), with a reset pointer in the error message. After a host reinstall or key change,
+  fingerprint is recorded in `hostKeys` (persisted with settings); every later connection is verified, any
+  fingerprint in the set matches, and **a changed fingerprint rejects the connection outright** (defense
+  against impersonation), with a reset pointer in the error message. A host’s multiple keys (0.19.0, e.g.
+  rsa + ed25519) are each recorded and merged into one record — algorithm negotiation changes no longer
+  cause false alarms. After a host reinstall or key change,
   delete the record under Settings → Plugins → Terminal Panel → “SSH host key
   records” and reconnect (the record list supports deletion). **“Import from known_hosts”
-  (0.4.1)**: parses `~/.ssh/known_hosts` in one click to pre-fill existing host fingerprints in bulk (host
+  (0.4.1)**: parses `~/.ssh/known_hosts` in one click to pre-fill existing host fingerprints in bulk, keeping
+  all of a host’s rsa/ed25519 entries (no longer first-entry-only); host
   names from the connection book are also used to restore `|1|` hashed entries, and non-default ports are
-  parsed as `[host]:port`);
+  parsed as `[host]:port`;
 - **Connection test (0.11.0)**: a “Test” button on each connection-book row of the settings card, plus a
   “Test connection” button in the SSH connection dialog — both perform **link diagnostics only** (no session,
   no `maxSessions` slot, no shell): first a TCP pre-check (DNS + connect, failures classified as
@@ -496,7 +506,7 @@ session belongs to (visually aligned with FinalShell’s session monitor bar):
 | `cwd` | host startup directory | Fallback working directory (the client’s current session cwd wins) |
 | `reconnectGraceSec` | 120 | Seconds a session is kept alive after an abnormal disconnect (0~3600): the session survives a page refresh/network blip waiting for a reconnect, and the reaper ends it on timeout; `0` = the old behavior, end immediately on disconnect |
 | `sshHosts` | `[]` | SSH connection book (selectable in the panel “+” menu): entries `{name, host, port=22, username, auth=agent\|key\|password, keyPath, passphrase, password, agentForward, persist=false}`; saved as a whole-set replacement, the same name overwrites; `password` / `passphrase` support `env:VAR` references so no plaintext is stored; with persistence on, clicking an entry opens a tmux persistent session by default, and `persist=false` is an **opt-out** |
-| `hostKeys` | `[]` | SSH host key records (TOFU, maintained automatically): entries `{host, port, fingerprint}`; unique by host:port, appended automatically on the first connection, and a changed fingerprint rejects the connection; the settings card can delete them to reset |
+| `hostKeys` | `[]` | SSH host key records (TOFU, maintained automatically): entries `{host, port, fingerprints[]}` (the legacy single `fingerprint` field is migrated and merged on read); unique by host:port, one record holds all of a host’s keys, appended automatically on the first connection, any matching fingerprint is allowed, and a full mismatch rejects the connection; the settings card can delete them to reset |
 | `shellIntegration` | true | Injects the OSC 133/7 shell integration (command boundary markers + cwd reporting; `tty_capture{last}` depends on it); zsh/bash supported, other shells skipped automatically; can be turned off when compatibility problems appear |
 | `tunnels` | `[]` | Port-forwarding tunnels: entries `{name, bookName, direction=local\|remote, localPort?, remoteHost?, remotePort?, localTargetHost?, localTargetPort?, enabled}`; `bookName` references a connection-book entry for host and authentication; maintained graphically in the “Port forwarding” block of the card |
 | `sftpStyle` | `dialog` | SFTP File Browser UI style: `dialog` single pane (remote directory + upload/download/drag & drop) / `dual` two panes (local left / remote right, inline `⇨/⇦` server-side direct transfer); reopen SFTP for it to take effect |
@@ -610,7 +620,7 @@ which stays visible, clickable and typable instead of being covered by a full-sc
 the pain before 0.15).
 
 A mount slot is **connection-scoped**: its credentials / target come from the terminal tab that opened it.
-So since 0.18.4 every pane records its **owner tab** (`options.ownerSid`, defaulting to the active tab at
+So since 0.19.0 every pane records its **owner tab** (`options.ownerSid`, defaulting to the active tab at
 mount time): switching to another tab **hides** the pane (`data-dock-hidden`; its DOM and your rendered tree
 survive, in-flight transfers keep running) and switching back restores the scene; closing the owner tab tears
 the pane down. Without this, the pane stayed put across a tab switch — its title read `SFTP · cdc-test-161`
@@ -663,10 +673,11 @@ ctx.inject(['ttyPanel'], (c) => {
 - The title bar (title / collapse / ✕) is provided by tty, and consumers only own their own body; a throwing
   `onClose` is only logged with `console.warn`, without affecting closing the panel.
 
-> Contract versions: `ttyConnbar.version === 1`, `ttyTerminal.version === 2` (1 = `open` only,
-> 2 = adds `mount`), `ttyPanel.version === 1`. Consumers **decide capabilities by version number**; do not
-> rely on assumptions beyond `typeof fn === 'function'`; on an older tty the `inject` still fires, but the
-> corresponding fields are absent.
+> Contract versions: `ttyConnbar.version === 1`, `ttyTerminal.version === 3` (1 = `open` only,
+> 2 = adds `mount`, 3 = `open` reuses an existing live tab for the same connection + command by default),
+> `ttyPanel.version === 2` (1 = `mountPane` + `isOpen`, 2 = adds `minimize`). Consumers **decide capabilities
+> by version number**; do not rely on assumptions beyond `typeof fn === 'function'`; on an older tty the
+> `inject` still fires, but the corresponding fields are absent.
 
 ## Frame protocol (/api/dsh-tty/ws, JSON text frames; v3 = one connection with many sessions + reconnect)
 
@@ -705,8 +716,8 @@ pnpm --filter @hyzyn/dsh-tty build        # tsc host + esbuild browser half (cli
 pnpm --filter @hyzyn/dsh-tty typecheck
 pnpm --filter @hyzyn/dsh-tty probe        # M0 probe: PTY primitive verification (needs a real PTY)
 pnpm --filter @hyzyn/dsh-tty integration  # integration tests: real plugin × real DSH service composition
-pnpm --filter @hyzyn/dsh-tty live         # liveness smoke against a running dsh web
-pnpm --filter @hyzyn/dsh-tty tui          # TUI smoke: vim/nano full-screen rendering
+pnpm --filter @hyzyn/dsh-tty live         # liveness smoke: start dsh web first (default ws://127.0.0.1:3080; DSH_TTY_WS_URL overrides)
+pnpm --filter @hyzyn/dsh-tty tui          # TUI smoke: vim/htop full-screen rendering (start dsh web first, default :3090; DSH_TTY_WS_URL overrides)
 pnpm --filter @hyzyn/dsh-tty ssh-smoke    # SSH smoke: in-memory SSH server (ssh2.Server) × real spawnSsh end to end (build first)
 pnpm --filter @hyzyn/dsh-tty preview      # visual preview: headless Chrome screenshots per scene (see below)
 ```
@@ -732,14 +743,14 @@ node scripts/preview.mjs --theme=light   # light theme
 
 Coverage: local terminal / multi-tab + SSH connection bar / the “+” menu / SSH dialog (new, edit, probe)/
 settings card (also side by side with docker)/ SFTP (single pane, dual pane, placement fallback)/
-**mount slot follows the tab** (`dock-pane-tab`, the 0.18.4 regression)/ minimized badge / exit and error
+**mount slot follows the tab** (`dock-pane-tab`, the 0.19.0 regression)/ minimized badge / exit and error
 overlays / tunnel popover / search box / toast / embedded terminals (alone and alongside the panel)/
 docker panel and “containers → terminal drawer”.
 
 A scene may attach a **function-shaped** assertion to `window.__previewAssert` (returning `null` means pass,
 a string / array means fail); the script runs it and folds the result into `✓/✗`. An assertion that only
 lives in the fixture, seen by nobody unless someone pulls `diag` by hand, is a regression that is not really
-pinned — which is exactly what bit the 0.18.4 “panel does not follow the tab” fix: the assertion was written
+pinned — which is exactly what bit the 0.19.0 “panel does not follow the tab” fix: the assertion was written
 already, but because it was mixed into a `diag` object containing a function, the whole evaluation failed
 silently and everything reported ✓.
 
@@ -818,15 +829,22 @@ verify things like “is there still a white panel after switching light/dark th
   sandbox/chroot); downloads go through browser memory (for very large files prefer `scp`/`rsync` in the
   terminal); the agent tool `sftp_read` is ≤1MB and rejects binaries, and `sftp_write` is ≤1MB per call (use
   panel upload or the terminal for larger content); the `sftp_*` tools accept only connection-book entry
-  names, and inline credentials are for the panel dialog only.
+  names, and inline credentials are for the panel dialog only; overwrite writes go through a same-directory
+  temp part `.dsh-part-<uuid>` + rename (atomic) — if the host process crashes / loses power, a part orphan
+  may remain, and the next overwrite upload to the same directory automatically cleans parts older than 24h.
 - **SSH host keys are TOFU-pinned**: the first connection records the sha256 fingerprint automatically
-  (trust on first use), after which a matching fingerprint is allowed and a change is rejected — no longer an
+  (trust on first use), after which any recorded fingerprint matching is allowed and a full mismatch is
+  rejected — no longer an
   unconditional accept-and-log. Note TOFU’s inherent boundary: if the first connection already met a MITM,
   what was recorded is a fake fingerprint; `hostKeys` is persisted with settings, and a fingerprint change
-  requires a human to confirm in the settings card and delete the record; `hostKeys` stores only **one**
-  fingerprint per host:port — when a host offers several key types (rsa/ed25519/ecdsa) and algorithm
-  negotiation changes, it may report a false change, and deleting the record and reconnecting recalibrates
-  it; known_hosts import likewise takes the first entry per host.
+  requires a human to confirm in the settings card and delete the record; a host’s multiple key types
+  (rsa/ed25519/ecdsa) are merged into one record’s fingerprint set (0.19.0), so algorithm negotiation
+  changes no longer report a false “fingerprint changed”; known_hosts import likewise keeps every
+  fingerprint of a host.
+- **Browser tab persistence contains no plaintext credentials** (0.19.0): the spec copies that SSH tabs
+  write into sessionStorage / localStorage have plaintext `password` / `passphrase` stripped (`env:`
+  references are kept) and are flagged with `credsStripped` — on restore/respawn the terminal asks for
+  re-entry. The in-memory spec of the live session is unaffected.
 - **SSH passwords / passphrases should use `env:VAR` references**: the connection book is persisted in the
   settings file, so plaintext `password` / `passphrase` is an exposure surface; prefer `env:VAR` +
   dsh-env-manager, or `agent` authentication outright (credentials never touch disk).

package/README.md

@@ -83,8 +83,8 @@ dsh plugin --profile web add link:$(pwd)/packages/tty   # 仓库开发调试
   - **服务器状态条**：本地只拿得到 CPU / 内存 / 在线时长（`node:os`），磁盘 / TCP / 网速 / 温度
     显示「无」（**远端** Windows 主机走 PowerShell 那一跳，见「服务器状态条」一节）；
 - **验证到什么程度**：Windows 11 ARM 上跑过完整安装（`dsh plugin add @hyzyn/dsh-all`）、九个插件
-  装载、`dsh web` 起服务与浏览器半体交付（与 macOS 上服务的是同一份产物：12 312 246 字节、
-  新代码标记一致）、`[dsh-tty] mounted (shell=C:\WINDOWS\system32\cmd.exe)`；x64 Windows 由 CI
+  装载、`dsh web` 起服务与浏览器半体交付（与 macOS 上服务的是同一份产物，构建后比对大小与
+  内容标记一致；不写死字节数——每次重建都会变）、`[dsh-tty] mounted (shell=C:\WINDOWS\system32\cmd.exe)`；x64 Windows 由 CI
   的三平台矩阵覆盖（build / typecheck / test，见「开发」）。
 
 ## agent 工具（P1）
@@ -228,7 +228,7 @@ subsystem，宿主半体 `src/sftp.ts`）：
   一条标题栏（折叠不关面板、不中断浏览）；同一标签的挂载位已被别的面板（如容器面板）
   占用、或面板没开时，退回原来的居中对话框，**不会把别人的面板挤掉**。标题 / 折叠 / ✕ 由
   tty 的挂载位提供；
-- **跟着标签切（0.18.4）**：文件浏览连的是**打开它的那个标签**那台主机，所以它归属该标签：
+- **跟着标签切（0.19.0）**：文件浏览连的是**打开它的那个标签**那台主机，所以它归属该标签：
   切到别的标签时整块收起（在途传输照跑，切回来还在原地），标签关掉时一并收掉。**所有入口
   用同一条规则**——连接栏「SFTP」、连接簿条目的 📂、SSH 对话框 / 设置卡片的「文件浏览」都
   归属打开那一刻的活动标签；只有「面板开着但一个标签都没有」才算不隶属任何标签（永远可见）。
@@ -354,7 +354,11 @@ tmux server（专用 socket `dsh-tty`，与用户自己的 tmux 完全隔离）
   「终端 N」）；连接中先回显灰字 `Connecting user@host …`，就绪后状态栏
   显示 `SSH user@host 已连接`；连接失败（连接超时 / 认证被拒 / 主机
   不可达）以 `error` 帧带回原因，标签规格已随标签保存，点终端区域可按
-  原规格重开；
+  原规格重开；状态栏描述的是**当前活动标签**——切标签 / 关标签立刻换成
+  该标签自己的状态（失败原因、退出码都记在标签身上），所以关掉那个连不上
+  的标签后，红字不会继续挂在头上（宿主级消息如「连接断开 — 自动重连中」
+  不属于任何标签，不会被切标签抹掉）；反过来说，**后台标签自己的失败只记在
+  它身上**（标签栏状态点转红、终端区浮层带原文），不会顶掉活动标签的显示；
 - **agent forwarding（0.4.0）**：SSH 对话框勾选「agent forwarding」后远程
   可用本地 ssh-agent 的钥匙（远程 `git clone` 私有仓库等）。任意认证方式下
   都可开（凭证仍不落盘）；本机未运行 ssh-agent 时连接会明确报错而非静默
@@ -384,12 +388,14 @@ tmux server（专用 socket `dsh-tty`，与用户自己的 tmux 完全隔离）
   可滚动的长表单，浮层在那边会被裁掉；
 - **主机指纹 TOFU 钉扎（0.3.0）**：首次连接成功后把该主机（host:port）的
   sha256 指纹记录进 `hostKeys`（随 settings 持久化）；之后每次连接校验，
-  指纹一致放行，**指纹变更直接拒绝连接**（防中间人冒充），错误信息带重置
-  指引。主机重装/换钥匙后，到 设置 → 插件 → 终端面板 → 「SSH 主机密钥
-  记录」删除对应记录再重连即可（记录列表支持删除）。**「从 known_hosts
-  导入」（0.4.1）**：一键解析 `~/.ssh/known_hosts` 把已有主机指纹批量
-  预填充（连接簿里的主机名还会用于还原 `|1|` hashed 条目，非默认端口按
-  `[host]:port` 解析）；
+  集合内任一指纹匹配即放行，**指纹变更直接拒绝连接**（防中间人冒充），错误
+  信息带重置指引。同一主机的多把钥匙（0.19.0，如 rsa + ed25519）各记一条
+  指纹、合并存于同一记录——算法协商变化不再误报变更。主机重装/换钥匙后，
+  到 设置 → 插件 → 终端面板 → 「SSH 主机密钥记录」删除对应记录再重连即可
+  （记录列表支持删除）。**「从 known_hosts 导入」（0.4.1）**：一键解析
+  `~/.ssh/known_hosts` 把已有主机指纹批量预填充，同主机的 rsa/ed25519 等多条
+  记录全部保留（不再只留首条）；连接簿里的主机名还会用于还原 `|1|` hashed
+  条目，非默认端口按 `[host]:port` 解析；
 - **连接测试（0.11.0）**：设置卡片连接簿条目行内「测试」按钮，SSH 连接
   对话框另有「试连」按钮——两者都只做**链路诊断**（不建会话、不占
   `maxSessions` 名额、不开 shell）：先 TCP 预检（DNS + 建连，失败分类为
@@ -444,7 +450,7 @@ tmux server（专用 socket `dsh-tty`，与用户自己的 tmux 完全隔离）
 | `cwd` | 宿主启动目录 | 兜底工作目录（客户端当前会话 cwd 优先） |
 | `reconnectGraceSec` | 120 | 异常断开后会话保活秒数（0~3600）：刷新页面/网络抖动后会话存活等待重连，超时由回收器结束；`0` = 旧行为，断开立即结束 |
 | `sshHosts` | `[]` | SSH 连接簿（面板「+」菜单可选）：条目 `{name, host, port=22, username, auth=agent\|key\|password, keyPath, passphrase, password, agentForward, persist=false}`；保存时整体替换、同名覆盖；`password` / `passphrase` 支持 `env:VAR` 引用，避免明文入库；持久化开启时条目点击默认以 tmux 持久会话打开，`persist=false` 是**取消项** |
-| `hostKeys` | `[]` | SSH 主机指纹记录（TOFU，自动维护）：条目 `{host, port, fingerprint}`；按 host:port 唯一，首次连接自动追加，指纹变更拒绝连接；设置卡片可删除重置 |
+| `hostKeys` | `[]` | SSH 主机指纹记录（TOFU，自动维护）：条目 `{host, port, fingerprints[]}`（旧版单 `fingerprint` 字段读取时自动迁移合并）；按 host:port 唯一，一机多把钥匙共用一条记录，首次连接自动追加、任一指纹匹配放行、全部不匹配拒绝连接；设置卡片可删除重置 |
 | `shellIntegration` | true | 注入 OSC 133/7 shell 集成（命令边界标记 + cwd 上报；`tty_capture{last}` 依赖它）；zsh/bash 支持，其他 shell 自动跳过；出兼容问题时可关闭 |
 | `tunnels` | `[]` | 端口转发隧道：条目 `{name, bookName, direction=local\|remote, localPort?, remoteHost?, remotePort?, localTargetHost?, localTargetPort?, enabled}`；`bookName` 引用连接簿条目提供主机与认证；卡片「端口转发」区块可视化维护 |
 | `sftpStyle` | `dialog` | SFTP 文件浏览界面风格：`dialog` 单窗体（远程目录 + 上传/下载/拖拽）/ `dual` 双栏（左本机 / 右远程，行内 `⇨/⇦` 宿主服务端直传）；重新打开 SFTP 生效 |
@@ -564,7 +570,7 @@ ctx.inject(['ttyTerminal'], (c) => {
 连接栏点「容器」，容器面板挂在终端**右侧**，终端继续可见、可点、可输入，而不是被整屏
 弹窗盖住（0.15 之前那正是用户的痛点）。
 
-挂载位是**连接级**的：它的凭证 / 目标来自**打开它的那个终端标签**。所以 0.18.4 起每块
+挂载位是**连接级**的：它的凭证 / 目标来自**打开它的那个终端标签**。所以 0.19.0 起每块
 pane 记一个「归属标签」（`options.ownerSid`，默认 = 挂载那一刻的活动标签）：切到别的
 标签时整块**收起**（`data-dock-hidden`，DOM 与你 render 的树都保活，在途传输继续跑），
 切回来恢复现场；归属标签被关掉时 pane 一并收掉。不这么做的话，切完标签面板还停在原处
@@ -627,7 +633,7 @@ ctx.inject(['ttyPanel'], (c) => {
 })
 ```
 
-> 契约版本：`ttyConnbar.version === 1`、`ttyTerminal.version === 2`（1 = 只有 `open`，
+> 契约版本：`ttyConnbar.version === 1`、`ttyTerminal.version === 3`（1 = 只有 `open`，
 > 2 = 增加 `mount`，3 = `open` 默认复用同「连接 + 命令」的活标签）、`ttyPanel.version === 2`（1 = `mountPane` + `isOpen`，2 = 增加
 > `minimize`）。消费方**按版本号判断能力**，不要用
 > `typeof fn === 'function'` 之外的假设；老版本 tty 上 `inject` 依然会触发，但没有
@@ -669,8 +675,8 @@ pnpm --filter @hyzyn/dsh-tty build        # tsc 宿主 + esbuild 浏览器半体
 pnpm --filter @hyzyn/dsh-tty typecheck
 pnpm --filter @hyzyn/dsh-tty probe        # M0 探针：PTY 原语验证（需真实 PTY）
 pnpm --filter @hyzyn/dsh-tty integration  # 集成测试：真实插件 × 真实 DSH 服务组合
-pnpm --filter @hyzyn/dsh-tty live         # 对运行中的 dsh web 做存活冒烟
-pnpm --filter @hyzyn/dsh-tty tui          # TUI 冒烟：vim/nano 全屏渲染
+pnpm --filter @hyzyn/dsh-tty live         # 存活冒烟：需先起 dsh web（默认连 ws://127.0.0.1:3080，DSH_TTY_WS_URL 可覆盖）
+pnpm --filter @hyzyn/dsh-tty tui          # TUI 冒烟：vim/htop 全屏渲染（需先起 dsh web，默认连 :3090，DSH_TTY_WS_URL 可覆盖）
 pnpm --filter @hyzyn/dsh-tty ssh-smoke    # SSH 冒烟：内存 SSH server（ssh2.Server）× 真实 spawnSsh 端到端（需先 build）
 pnpm --filter @hyzyn/dsh-tty preview      # 视觉预览：headless Chrome 逐场景截图（见下）
 ```
@@ -695,12 +701,12 @@ node scripts/preview.mjs --theme=light   # 浅色主题
 
 覆盖：本地终端 / 多标签 + SSH 连接栏 / 「+」菜单 / SSH 对话框（新建、编辑、试连）/
 设置卡片（含与 docker 并排对照）/ SFTP（单窗体、双栏、落点回退）/
-**挂载位跟着标签切**（`dock-pane-tab`，0.18.4 的回归）/ 最小化徽标 / 退出与错误遮罩 /
+**挂载位跟着标签切**（`dock-pane-tab`，0.19.0 的回归）/ 最小化徽标 / 退出与错误遮罩 /
 隧道弹层 / 搜索框 / toast / 嵌入式终端（单独与面板共存）/ docker 面板与「容器 → 终端抽屉」。
 
 场景可以把**函数形态**的断言挂到 `window.__previewAssert`（返回 `null` = 通过，返回
 字符串 / 数组 = 失败），脚本会跑掉它并把结果计入 `✓/✗`。断言光挂在夹具里、只有手工
-取 `diag` 时才有人看，回归等于没钉——0.18.4 修「面板不跟标签切」时就吃到这个亏：断言
+取 `diag` 时才有人看，回归等于没钉——0.19.0 修「面板不跟标签切」时就吃到这个亏：断言
 早写好了，但因为混在带函数的 `diag` 对象里，整条求值静默失败，一路都是 ✓。
 
 夹具还会把 `--dsw-*` 皮肤变量与真实界面一并渲染，因此能验
@@ -748,14 +754,18 @@ node scripts/preview.mjs --theme=light   # 浅色主题
   反馈补丁兼容。
 - **端口转发边界**：本地监听固定 127.0.0.1（不暴露局域网）；remote 方向服务端监听还受服务端 sshd `GatewayPorts` 限制；隧道的 SSH 连接与终端会话独立，均走 TOFU 钉扎与连接簿认证；隧道规格变更（端口/目标/启停）经「保存」热生效，热改连接簿凭证则在下次重连时生效。
 - **会话持久化（tmux）边界**：持久标签由 tmux server（专用 socket `dsh-tty`）托管——宿主被硬杀 / 保活回收 / 浏览器丢失标签规格时，tmux 会话会**留存**（这正是恢复能力的前提），直到机器重启或手动 `tmux -L dsh-tty kill-server`；agent 命令粒度工具（capture{last}/expect）依赖 tmux ≥3.3 的 DCS `allow-passthrough`，更低版本持久化可用但该能力降级（SSH 远程会话不注入 shell 集成钩子，capture{last} 本就不可用，与持久化无关）；恢复接回重画的是当前可见屏，断线前的滚动历史在 tmux 自己的 history buffer（copy-mode）里，不在外层 xterm 滚动区；持久标签的 `exit` 帧退出码是 tmux 客户端的（0），shell 退出码经 OSC 133;D 标记照常可用；`tmux.conf` 只在 tmux server 首启时读取（改配置后需 `tmux -L dsh-tty kill-server` 让下次 spawn 重建 server）；`grace=0` 的「断开立即结束」对持久标签同样会 kill-session（tmux 会话不存活）；持久 SSH 会话要求远程装有 tmux（未装自动降级普通会话，连接栏常驻「未持久化」标记），且远程 `~/.tmux.conf` 不影响专用 socket 的独立 conf（`-f /dev/null`）；SSH 持久会话名随 settings 留存；**两个窗口同时接回同一持久会话**时共享同一个宿主 PTY（0.10.1，单客户端扇出，名额不翻倍），两侧行数以最近调整尺寸的窗口为准（尺寸不一致时较大一侧由 onResize 自愈重画）。
-- **SFTP 边界**：文件权限 = 对应 SSH 账号的终端权限（无额外沙箱/chroot）；下载经浏览器内存（超大文件建议终端 `scp`/`rsync`）；agent 工具 `sftp_read` ≤1MB 且拒绝二进制、`sftp_write` 单次 ≤1MB（大内容走面板上传或终端）；`sftp_*` 工具只收连接簿条目名，内联凭证仅供面板对话框使用。
+- **SFTP 边界**：文件权限 = 对应 SSH 账号的终端权限（无额外沙箱/chroot）；下载经浏览器内存（超大文件建议终端 `scp`/`rsync`）；agent 工具 `sftp_read` ≤1MB 且拒绝二进制、`sftp_write` 单次 ≤1MB（大内容走面板上传或终端）；`sftp_*` 工具只收连接簿条目名，内联凭证仅供面板对话框使用；覆盖写走同目录临时分片 `.dsh-part-<uuid>` + rename 原子落盘——宿主进程崩溃 / 断电时可能留下分片孤儿（下次向同目录覆盖上传时会自动清理超过 24h 的残留）。
 - **SSH host key 为 TOFU 钉扎**：首次连接自动记录 sha256 指纹（trust on
-  first use），之后指纹一致放行、变更拒绝——不再是无条件放行的
+  first use），之后任一记录指纹匹配放行、全部不匹配拒绝——不再是无条件放行的
   accept-and-log。注意 TOFU 的固有边界：首次连接若已遭遇 MITM 则记录的
   就是伪指纹；`hostKeys` 随 settings 落盘，指纹变更需人工在设置卡片确认
-  并删除记录；`hostKeys` 按 host:port 只存**一条**指纹——同一主机提供多种
-  密钥类型（rsa/ed25519/ecdsa）且算法协商变化时可能误报变更，删除记录
-  重连即可重新校准；known_hosts 导入同为每主机首条优先。
+  并删除记录；同一主机的多把钥匙（rsa/ed25519/ecdsa）合并为一条记录的多
+  指纹集合（0.19.0），算法协商变化不再误报「指纹变更」；known_hosts 导入
+  同样保留同主机的全部指纹。
+- **浏览器标签持久化不含明文凭证**（0.19.0）：SSH 标签写入
+  sessionStorage / localStorage 的规格副本会剥掉明文 `password` / `passphrase`
+  （`env:` 引用保留），并打 `credsStripped` 标记——恢复/重开时终端里提示
+  重新输入。本会话内存里的规格不受影响。
 - **SSH 密码 / 口令建议 `env:VAR` 引用**：连接簿随 settings 文件落盘，
   `password` / `passphrase` 明文入库有泄露面；建议 `env:VAR` +
   dsh-env-manager 托管，或直接用 `agent` 认证（凭证不落盘）。