@hxa-rn/react-native-gcanvas 6.0.24-beta.1

package/harmony/gcanvas/src/main/cpp/core/harmony/freetype/src/psaux/cffdecode.c

@@ -0,0 +1,2411 @@
+/****************************************************************************
+ *
+ * cffdecode.c
+ *
+ *   PostScript CFF (Type 2) decoding routines (body).
+ *
+ * Copyright (C) 2017-2024 by
+ * David Turner, Robert Wilhelm, and Werner Lemberg.
+ *
+ * This file is part of the FreeType project, and may only be used,
+ * modified, and distributed under the terms of the FreeType project
+ * license, LICENSE.TXT.  By continuing to use, modify, or distribute
+ * this file you indicate that you have read the license and
+ * understand and accept it fully.
+ *
+ */
+
+
+#include <freetype/freetype.h>
+#include <freetype/internal/ftcalc.h>
+#include <freetype/internal/ftdebug.h>
+#include <freetype/internal/ftserv.h>
+#include <freetype/internal/services/svcfftl.h>
+
+#include "cffdecode.h"
+#include "psobjs.h"
+
+#include "psauxerr.h"
+
+
+  /**************************************************************************
+   *
+   * The macro FT_COMPONENT is used in trace mode.  It is an implicit
+   * parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log
+   * messages during execution.
+   */
+#undef  FT_COMPONENT
+#define FT_COMPONENT  cffdecode
+
+
+#ifdef CFF_CONFIG_OPTION_OLD_ENGINE
+
+  typedef enum  CFF_Operator_
+  {
+    cff_op_unknown = 0,
+
+    cff_op_rmoveto,
+    cff_op_hmoveto,
+    cff_op_vmoveto,
+
+    cff_op_rlineto,
+    cff_op_hlineto,
+    cff_op_vlineto,
+
+    cff_op_rrcurveto,
+    cff_op_hhcurveto,
+    cff_op_hvcurveto,
+    cff_op_rcurveline,
+    cff_op_rlinecurve,
+    cff_op_vhcurveto,
+    cff_op_vvcurveto,
+
+    cff_op_flex,
+    cff_op_hflex,
+    cff_op_hflex1,
+    cff_op_flex1,
+
+    cff_op_endchar,
+
+    cff_op_hstem,
+    cff_op_vstem,
+    cff_op_hstemhm,
+    cff_op_vstemhm,
+
+    cff_op_hintmask,
+    cff_op_cntrmask,
+    cff_op_dotsection,  /* deprecated, acts as no-op */
+
+    cff_op_abs,
+    cff_op_add,
+    cff_op_sub,
+    cff_op_div,
+    cff_op_neg,
+    cff_op_random,
+    cff_op_mul,
+    cff_op_sqrt,
+
+    cff_op_blend,
+
+    cff_op_drop,
+    cff_op_exch,
+    cff_op_index,
+    cff_op_roll,
+    cff_op_dup,
+
+    cff_op_put,
+    cff_op_get,
+    cff_op_store,
+    cff_op_load,
+
+    cff_op_and,
+    cff_op_or,
+    cff_op_not,
+    cff_op_eq,
+    cff_op_ifelse,
+
+    cff_op_callsubr,
+    cff_op_callgsubr,
+    cff_op_return,
+
+    /* Type 1 opcodes: invalid but seen in real life */
+    cff_op_hsbw,
+    cff_op_closepath,
+    cff_op_callothersubr,
+    cff_op_pop,
+    cff_op_seac,
+    cff_op_sbw,
+    cff_op_setcurrentpoint,
+
+    /* do not remove */
+    cff_op_max
+
+  } CFF_Operator;
+
+
+#define CFF_COUNT_CHECK_WIDTH  0x80
+#define CFF_COUNT_EXACT        0x40
+#define CFF_COUNT_CLEAR_STACK  0x20
+
+  /* count values which have the `CFF_COUNT_CHECK_WIDTH' flag set are  */
+  /* used for checking the width and requested numbers of arguments    */
+  /* only; they are set to zero afterwards                             */
+
+  /* the other two flags are informative only and unused currently     */
+
+  static const FT_Byte  cff_argument_counts[] =
+  {
+    0,  /* unknown */
+
+    2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, /* rmoveto */
+    1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
+    1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT,
+
+    0 | CFF_COUNT_CLEAR_STACK, /* rlineto */
+    0 | CFF_COUNT_CLEAR_STACK,
+    0 | CFF_COUNT_CLEAR_STACK,
+
+    0 | CFF_COUNT_CLEAR_STACK, /* rrcurveto */
+    0 | CFF_COUNT_CLEAR_STACK,
+    0 | CFF_COUNT_CLEAR_STACK,
+    0 | CFF_COUNT_CLEAR_STACK,
+    0 | CFF_COUNT_CLEAR_STACK,
+    0 | CFF_COUNT_CLEAR_STACK,
+    0 | CFF_COUNT_CLEAR_STACK,
+
+    13, /* flex */
+    7,
+    9,
+    11,
+
+    0 | CFF_COUNT_CHECK_WIDTH, /* endchar */
+
+    2 | CFF_COUNT_CHECK_WIDTH, /* hstem */
+    2 | CFF_COUNT_CHECK_WIDTH,
+    2 | CFF_COUNT_CHECK_WIDTH,
+    2 | CFF_COUNT_CHECK_WIDTH,
+
+    0 | CFF_COUNT_CHECK_WIDTH, /* hintmask */
+    0 | CFF_COUNT_CHECK_WIDTH, /* cntrmask */
+    0, /* dotsection */
+
+    1, /* abs */
+    2,
+    2,
+    2,
+    1,
+    0,
+    2,
+    1,
+
+    1, /* blend */
+
+    1, /* drop */
+    2,
+    1,
+    2,
+    1,
+
+    2, /* put */
+    1,
+    4,
+    3,
+
+    2, /* and */
+    2,
+    1,
+    2,
+    4,
+
+    1, /* callsubr */
+    1,
+    0,
+
+    2, /* hsbw */
+    0,
+    0,
+    0,
+    5, /* seac */
+    4, /* sbw */
+    2  /* setcurrentpoint */
+  };
+
+
+  static FT_Error
+  cff_operator_seac( CFF_Decoder*  decoder,
+                     FT_Pos        asb,
+                     FT_Pos        adx,
+                     FT_Pos        ady,
+                     FT_Int        bchar,
+                     FT_Int        achar )
+  {
+    FT_Error      error;
+    CFF_Builder*  builder = &decoder->builder;
+    FT_Int        bchar_index, achar_index;
+    TT_Face       face    = decoder->builder.face;
+    FT_Vector     left_bearing, advance;
+    FT_Byte*      charstring;
+    FT_ULong      charstring_len;
+    FT_Pos        glyph_width;
+
+
+    if ( decoder->seac )
+    {
+      FT_ERROR(( "cff_operator_seac: invalid nested seac\n" ));
+      return FT_THROW( Syntax_Error );
+    }
+
+    adx = ADD_LONG( adx, decoder->builder.left_bearing.x );
+    ady = ADD_LONG( ady, decoder->builder.left_bearing.y );
+
+#ifdef FT_CONFIG_OPTION_INCREMENTAL
+    /* Incremental fonts don't necessarily have valid charsets.        */
+    /* They use the character code, not the glyph index, in this case. */
+    if ( face->root.internal->incremental_interface )
+    {
+      bchar_index = bchar;
+      achar_index = achar;
+    }
+    else
+#endif /* FT_CONFIG_OPTION_INCREMENTAL */
+    {
+      CFF_Font cff = (CFF_Font)( face->extra.data );
+
+
+      bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar );
+      achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar );
+    }
+
+    if ( bchar_index < 0 || achar_index < 0 )
+    {
+      FT_ERROR(( "cff_operator_seac:"
+                 " invalid seac character code arguments\n" ));
+      return FT_THROW( Syntax_Error );
+    }
+
+    /* If we are trying to load a composite glyph, do not load the */
+    /* accent character and return the array of subglyphs.         */
+    if ( builder->no_recurse )
+    {
+      FT_GlyphSlot    glyph  = (FT_GlyphSlot)builder->glyph;
+      FT_GlyphLoader  loader = glyph->internal->loader;
+      FT_SubGlyph     subg;
+
+
+      /* reallocate subglyph array if necessary */
+      error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 );
+      if ( error )
+        goto Exit;
+
+      subg = loader->current.subglyphs;
+
+      /* subglyph 0 = base character */
+      subg->index = bchar_index;
+      subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES |
+                    FT_SUBGLYPH_FLAG_USE_MY_METRICS;
+      subg->arg1  = 0;
+      subg->arg2  = 0;
+      subg++;
+
+      /* subglyph 1 = accent character */
+      subg->index = achar_index;
+      subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES;
+      subg->arg1  = (FT_Int)( adx >> 16 );
+      subg->arg2  = (FT_Int)( ady >> 16 );
+
+      /* set up remaining glyph fields */
+      glyph->num_subglyphs = 2;
+      glyph->subglyphs     = loader->base.subglyphs;
+      glyph->format        = FT_GLYPH_FORMAT_COMPOSITE;
+
+      loader->current.num_subglyphs = 2;
+    }
+
+    FT_GlyphLoader_Prepare( builder->loader );
+
+    /* First load `bchar' in builder */
+    error = decoder->get_glyph_callback( face, (FT_UInt)bchar_index,
+                                         &charstring, &charstring_len );
+    if ( !error )
+    {
+      /* the seac operator must not be nested */
+      decoder->seac = TRUE;
+      error = cff_decoder_parse_charstrings( decoder, charstring,
+                                             charstring_len, 0 );
+      decoder->seac = FALSE;
+
+      decoder->free_glyph_callback( face, &charstring, charstring_len );
+
+      if ( error )
+        goto Exit;
+    }
+
+    /* Save the left bearing, advance and glyph width of the base */
+    /* character as they will be erased by the next load.         */
+
+    left_bearing = builder->left_bearing;
+    advance      = builder->advance;
+    glyph_width  = decoder->glyph_width;
+
+    builder->left_bearing.x = 0;
+    builder->left_bearing.y = 0;
+
+    builder->pos_x = SUB_LONG( adx, asb );
+    builder->pos_y = ady;
+
+    /* Now load `achar' on top of the base outline. */
+    error = decoder->get_glyph_callback( face, (FT_UInt)achar_index,
+                                         &charstring, &charstring_len );
+    if ( !error )
+    {
+      /* the seac operator must not be nested */
+      decoder->seac = TRUE;
+      error = cff_decoder_parse_charstrings( decoder, charstring,
+                                             charstring_len, 0 );
+      decoder->seac = FALSE;
+
+      decoder->free_glyph_callback( face, &charstring, charstring_len );
+
+      if ( error )
+        goto Exit;
+    }
+
+    /* Restore the left side bearing, advance and glyph width */
+    /* of the base character.                                 */
+    builder->left_bearing = left_bearing;
+    builder->advance      = advance;
+    decoder->glyph_width  = glyph_width;
+
+    builder->pos_x = 0;
+    builder->pos_y = 0;
+
+  Exit:
+    return error;
+  }
+
+#endif /* CFF_CONFIG_OPTION_OLD_ENGINE */
+
+
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+  /**********                                                      *********/
+  /**********                                                      *********/
+  /**********             GENERIC CHARSTRING PARSING               *********/
+  /**********                                                      *********/
+  /**********                                                      *********/
+  /*************************************************************************/
+  /*************************************************************************/
+  /*************************************************************************/
+
+  /**************************************************************************
+   *
+   * @Function:
+   *   cff_compute_bias
+   *
+   * @Description:
+   *   Computes the bias value in dependence of the number of glyph
+   *   subroutines.
+   *
+   * @Input:
+   *   in_charstring_type ::
+   *     The `CharstringType' value of the top DICT
+   *     dictionary.
+   *
+   *   num_subrs ::
+   *     The number of glyph subroutines.
+   *
+   * @Return:
+   *   The bias value.
+   */
+  static FT_Int
+  cff_compute_bias( FT_Int   in_charstring_type,
+                    FT_UInt  num_subrs )
+  {
+    FT_Int  result;
+
+
+    if ( in_charstring_type == 1 )
+      result = 0;
+    else if ( num_subrs < 1240 )
+      result = 107;
+    else if ( num_subrs < 33900U )
+      result = 1131;
+    else
+      result = 32768U;
+
+    return result;
+  }
+
+
+  FT_LOCAL_DEF( FT_Int )
+  cff_lookup_glyph_by_stdcharcode( CFF_Font  cff,
+                                   FT_Int    charcode )
+  {
+    FT_UInt    n;
+    FT_UShort  glyph_sid;
+
+    FT_Service_CFFLoad  cffload;
+
+
+    /* CID-keyed fonts don't have glyph names */
+    if ( !cff->charset.sids )
+      return -1;
+
+    /* check range of standard char code */
+    if ( charcode < 0 || charcode > 255 )
+      return -1;
+
+#if 0
+    /* retrieve cffload from list of current modules */
+    FT_Service_CFFLoad  cffload;
+
+
+    FT_FACE_FIND_GLOBAL_SERVICE( face, cffload, CFF_LOAD );
+    if ( !cffload )
+    {
+      FT_ERROR(( "cff_lookup_glyph_by_stdcharcode:"
+                 " the `cffload' module is not available\n" ));
+      return FT_THROW( Unimplemented_Feature );
+    }
+#endif
+
+    cffload = (FT_Service_CFFLoad)cff->cffload;
+
+    /* Get code to SID mapping from `cff_standard_encoding'. */
+    glyph_sid = cffload->get_standard_encoding( (FT_UInt)charcode );
+
+    for ( n = 0; n < cff->num_glyphs; n++ )
+    {
+      if ( cff->charset.sids[n] == glyph_sid )
+        return (FT_Int)n;
+    }
+
+    return -1;
+  }
+
+
+#ifdef CFF_CONFIG_OPTION_OLD_ENGINE
+
+  /**************************************************************************
+   *
+   * @Function:
+   *   cff_decoder_parse_charstrings
+   *
+   * @Description:
+   *   Parses a given Type 2 charstrings program.
+   *
+   * @InOut:
+   *   decoder ::
+   *     The current Type 1 decoder.
+   *
+   * @Input:
+   *   charstring_base ::
+   *     The base of the charstring stream.
+   *
+   *   charstring_len ::
+   *     The length in bytes of the charstring stream.
+   *
+   *   in_dict ::
+   *     Set to 1 if function is called from top or
+   *     private DICT (needed for Multiple Master CFFs).
+   *
+   * @Return:
+   *   FreeType error code.  0 means success.
+   */
+  FT_LOCAL_DEF( FT_Error )
+  cff_decoder_parse_charstrings( CFF_Decoder*  decoder,
+                                 FT_Byte*      charstring_base,
+                                 FT_ULong      charstring_len,
+                                 FT_Bool       in_dict )
+  {
+    FT_Error           error;
+    CFF_Decoder_Zone*  zone;
+    FT_Byte*           ip;
+    FT_Byte*           limit;
+    CFF_Builder*       builder = &decoder->builder;
+    FT_Pos             x, y;
+    FT_Fixed*          stack;
+    FT_Int             charstring_type =
+                         decoder->cff->top_font.font_dict.charstring_type;
+    FT_UShort          num_designs =
+                         decoder->cff->top_font.font_dict.num_designs;
+    FT_UShort          num_axes =
+                         decoder->cff->top_font.font_dict.num_axes;
+
+    T2_Hints_Funcs  hinter;
+
+
+    /* set default width */
+    decoder->num_hints  = 0;
+    decoder->read_width = 1;
+
+    /* initialize the decoder */
+    decoder->top  = decoder->stack;
+    decoder->zone = decoder->zones;
+    zone          = decoder->zones;
+    stack         = decoder->top;
+
+    hinter = (T2_Hints_Funcs)builder->hints_funcs;
+
+    builder->path_begun = 0;
+
+    if ( !charstring_base )
+      return FT_Err_Ok;
+
+    zone->base           = charstring_base;
+    limit = zone->limit  = charstring_base + charstring_len;
+    ip    = zone->cursor = zone->base;
+
+    error = FT_Err_Ok;
+
+    x = builder->pos_x;
+    y = builder->pos_y;
+
+    /* begin hints recording session, if any */
+    if ( hinter )
+      hinter->open( hinter->hints );
+
+    /* now execute loop */
+    while ( ip < limit )
+    {
+      CFF_Operator  op;
+      FT_Byte       v;
+
+
+      /*********************************************************************
+       *
+       * Decode operator or operand
+       */
+      v = *ip++;
+      if ( v >= 32 || v == 28 )
+      {
+        FT_Int    shift = 16;
+        FT_Int32  val;
+
+
+        /* this is an operand, push it on the stack */
+
+        /* if we use shifts, all computations are done with unsigned */
+        /* values; the conversion to a signed value is the last step */
+        if ( v == 28 )
+        {
+          if ( ip + 1 >= limit )
+            goto Syntax_Error;
+          val = (FT_Short)( ( (FT_UShort)ip[0] << 8 ) | ip[1] );
+          ip += 2;
+        }
+        else if ( v < 247 )
+          val = (FT_Int32)v - 139;
+        else if ( v < 251 )
+        {
+          if ( ip >= limit )
+            goto Syntax_Error;
+          val = ( (FT_Int32)v - 247 ) * 256 + *ip++ + 108;
+        }
+        else if ( v < 255 )
+        {
+          if ( ip >= limit )
+            goto Syntax_Error;
+          val = -( (FT_Int32)v - 251 ) * 256 - *ip++ - 108;
+        }
+        else
+        {
+          if ( ip + 3 >= limit )
+            goto Syntax_Error;
+          val = (FT_Int32)( ( (FT_UInt32)ip[0] << 24 ) |
+                            ( (FT_UInt32)ip[1] << 16 ) |
+                            ( (FT_UInt32)ip[2] <<  8 ) |
+                              (FT_UInt32)ip[3]         );
+          ip += 4;
+          if ( charstring_type == 2 )
+            shift = 0;
+        }
+        if ( decoder->top - stack >= CFF_MAX_OPERANDS )
+          goto Stack_Overflow;
+
+        val             = (FT_Int32)( (FT_UInt32)val << shift );
+        *decoder->top++ = val;
+
+#ifdef FT_DEBUG_LEVEL_TRACE
+        if ( !( val & 0xFFFFL ) )
+          FT_TRACE4(( " %hd", (FT_Short)( (FT_UInt32)val >> 16 ) ));
+        else
+          FT_TRACE4(( " %.5f", val / 65536.0 ));
+#endif
+
+      }
+      else
+      {
+        /* The specification says that normally arguments are to be taken */
+        /* from the bottom of the stack.  However, this seems not to be   */
+        /* correct, at least for Acroread 7.0.8 on GNU/Linux: It pops the */
+        /* arguments similar to a PS interpreter.                         */
+
+        FT_Fixed*  args     = decoder->top;
+        FT_Int     num_args = (FT_Int)( args - decoder->stack );
+        FT_Int     req_args;
+
+
+        /* find operator */
+        op = cff_op_unknown;
+
+        switch ( v )
+        {
+        case 1:
+          op = cff_op_hstem;
+          break;
+        case 3:
+          op = cff_op_vstem;
+          break;
+        case 4:
+          op = cff_op_vmoveto;
+          break;
+        case 5:
+          op = cff_op_rlineto;
+          break;
+        case 6:
+          op = cff_op_hlineto;
+          break;
+        case 7:
+          op = cff_op_vlineto;
+          break;
+        case 8:
+          op = cff_op_rrcurveto;
+          break;
+        case 9:
+          op = cff_op_closepath;
+          break;
+        case 10:
+          op = cff_op_callsubr;
+          break;
+        case 11:
+          op = cff_op_return;
+          break;
+        case 12:
+          if ( ip >= limit )
+            goto Syntax_Error;
+          v = *ip++;
+
+          switch ( v )
+          {
+          case 0:
+            op = cff_op_dotsection;
+            break;
+          case 1: /* this is actually the Type1 vstem3 operator */
+            op = cff_op_vstem;
+            break;
+          case 2: /* this is actually the Type1 hstem3 operator */
+            op = cff_op_hstem;
+            break;
+          case 3:
+            op = cff_op_and;
+            break;
+          case 4:
+            op = cff_op_or;
+            break;
+          case 5:
+            op = cff_op_not;
+            break;
+          case 6:
+            op = cff_op_seac;
+            break;
+          case 7:
+            op = cff_op_sbw;
+            break;
+          case 8:
+            op = cff_op_store;
+            break;
+          case 9:
+            op = cff_op_abs;
+            break;
+          case 10:
+            op = cff_op_add;
+            break;
+          case 11:
+            op = cff_op_sub;
+            break;
+          case 12:
+            op = cff_op_div;
+            break;
+          case 13:
+            op = cff_op_load;
+            break;
+          case 14:
+            op = cff_op_neg;
+            break;
+          case 15:
+            op = cff_op_eq;
+            break;
+          case 16:
+            op = cff_op_callothersubr;
+            break;
+          case 17:
+            op = cff_op_pop;
+            break;
+          case 18:
+            op = cff_op_drop;
+            break;
+          case 20:
+            op = cff_op_put;
+            break;
+          case 21:
+            op = cff_op_get;
+            break;
+          case 22:
+            op = cff_op_ifelse;
+            break;
+          case 23:
+            op = cff_op_random;
+            break;
+          case 24:
+            op = cff_op_mul;
+            break;
+          case 26:
+            op = cff_op_sqrt;
+            break;
+          case 27:
+            op = cff_op_dup;
+            break;
+          case 28:
+            op = cff_op_exch;
+            break;
+          case 29:
+            op = cff_op_index;
+            break;
+          case 30:
+            op = cff_op_roll;
+            break;
+          case 33:
+            op = cff_op_setcurrentpoint;
+            break;
+          case 34:
+            op = cff_op_hflex;
+            break;
+          case 35:
+            op = cff_op_flex;
+            break;
+          case 36:
+            op = cff_op_hflex1;
+            break;
+          case 37:
+            op = cff_op_flex1;
+            break;
+          default:
+            FT_TRACE4(( " unknown op (12, %d)\n", v ));
+            break;
+          }
+          break;
+        case 13:
+          op = cff_op_hsbw;
+          break;
+        case 14:
+          op = cff_op_endchar;
+          break;
+        case 16:
+          op = cff_op_blend;
+          break;
+        case 18:
+          op = cff_op_hstemhm;
+          break;
+        case 19:
+          op = cff_op_hintmask;
+          break;
+        case 20:
+          op = cff_op_cntrmask;
+          break;
+        case 21:
+          op = cff_op_rmoveto;
+          break;
+        case 22:
+          op = cff_op_hmoveto;
+          break;
+        case 23:
+          op = cff_op_vstemhm;
+          break;
+        case 24:
+          op = cff_op_rcurveline;
+          break;
+        case 25:
+          op = cff_op_rlinecurve;
+          break;
+        case 26:
+          op = cff_op_vvcurveto;
+          break;
+        case 27:
+          op = cff_op_hhcurveto;
+          break;
+        case 29:
+          op = cff_op_callgsubr;
+          break;
+        case 30:
+          op = cff_op_vhcurveto;
+          break;
+        case 31:
+          op = cff_op_hvcurveto;
+          break;
+        default:
+          FT_TRACE4(( " unknown op (%d)\n", v ));
+          break;
+        }
+
+        if ( op == cff_op_unknown )
+          continue;
+
+        /* in Multiple Master CFFs, T2 charstrings can appear in */
+        /* dictionaries, but some operators are prohibited       */
+        if ( in_dict )
+        {
+          switch ( op )
+          {
+          case cff_op_hstem:
+          case cff_op_vstem:
+          case cff_op_vmoveto:
+          case cff_op_rlineto:
+          case cff_op_hlineto:
+          case cff_op_vlineto:
+          case cff_op_rrcurveto:
+          case cff_op_hstemhm:
+          case cff_op_hintmask:
+          case cff_op_cntrmask:
+          case cff_op_rmoveto:
+          case cff_op_hmoveto:
+          case cff_op_vstemhm:
+          case cff_op_rcurveline:
+          case cff_op_rlinecurve:
+          case cff_op_vvcurveto:
+          case cff_op_hhcurveto:
+          case cff_op_vhcurveto:
+          case cff_op_hvcurveto:
+          case cff_op_hflex:
+          case cff_op_flex:
+          case cff_op_hflex1:
+          case cff_op_flex1:
+          case cff_op_callsubr:
+          case cff_op_callgsubr:
+            /* deprecated opcodes */
+          case cff_op_dotsection:
+            /* invalid Type 1 opcodes */
+          case cff_op_hsbw:
+          case cff_op_closepath:
+          case cff_op_callothersubr:
+          case cff_op_seac:
+          case cff_op_sbw:
+          case cff_op_setcurrentpoint:
+            goto MM_Error;
+
+          default:
+            break;
+          }
+        }
+
+        /* check arguments */
+        req_args = cff_argument_counts[op];
+        if ( req_args & CFF_COUNT_CHECK_WIDTH )
+        {
+          if ( num_args > 0 && decoder->read_width )
+          {
+            /* If `nominal_width' is non-zero, the number is really a      */
+            /* difference against `nominal_width'.  Else, the number here  */
+            /* is truly a width, not a difference against `nominal_width'. */
+            /* If the font does not set `nominal_width', then              */
+            /* `nominal_width' defaults to zero, and so we can set         */
+            /* `glyph_width' to `nominal_width' plus number on the stack   */
+            /* -- for either case.                                         */
+
+            FT_Int  set_width_ok;
+
+
+            switch ( op )
+            {
+            case cff_op_hmoveto:
+            case cff_op_vmoveto:
+              set_width_ok = num_args & 2;
+              break;
+
+            case cff_op_hstem:
+            case cff_op_vstem:
+            case cff_op_hstemhm:
+            case cff_op_vstemhm:
+            case cff_op_rmoveto:
+            case cff_op_hintmask:
+            case cff_op_cntrmask:
+              set_width_ok = num_args & 1;
+              break;
+
+            case cff_op_endchar:
+              /* If there is a width specified for endchar, we either have */
+              /* 1 argument or 5 arguments.  We like to argue.             */
+              set_width_ok = in_dict
+                               ? 0
+                               : ( ( num_args == 5 ) || ( num_args == 1 ) );
+              break;
+
+            default:
+              set_width_ok = 0;
+              break;
+            }
+
+            if ( set_width_ok )
+            {
+              decoder->glyph_width = decoder->nominal_width +
+                                       ( stack[0] >> 16 );
+
+              if ( decoder->width_only )
+              {
+                /* we only want the advance width; stop here */
+                break;
+              }
+
+              /* Consumed an argument. */
+              num_args--;
+            }
+          }
+
+          decoder->read_width = 0;
+          req_args            = 0;
+        }
+
+        req_args &= 0x000F;
+        if ( num_args < req_args )
+          goto Stack_Underflow;
+        args     -= req_args;
+        num_args -= req_args;
+
+        /* At this point, `args' points to the first argument of the  */
+        /* operand in case `req_args' isn't zero.  Otherwise, we have */
+        /* to adjust `args' manually.                                 */
+
+        /* Note that we only pop arguments from the stack which we    */
+        /* really need and can digest so that we can continue in case */
+        /* of superfluous stack elements.                             */
+
+        switch ( op )
+        {
+        case cff_op_hstem:
+        case cff_op_vstem:
+        case cff_op_hstemhm:
+        case cff_op_vstemhm:
+          /* the number of arguments is always even here */
+          FT_TRACE4(( "%s\n",
+              op == cff_op_hstem   ? " hstem"   :
+            ( op == cff_op_vstem   ? " vstem"   :
+            ( op == cff_op_hstemhm ? " hstemhm" : " vstemhm" ) ) ));
+
+          if ( hinter )
+            hinter->stems( hinter->hints,
+                           ( op == cff_op_hstem || op == cff_op_hstemhm ),
+                           num_args / 2,
+                           args - ( num_args & ~1 ) );
+
+          decoder->num_hints += num_args / 2;
+          args = stack;
+          break;
+
+        case cff_op_hintmask:
+        case cff_op_cntrmask:
+          FT_TRACE4(( "%s", op == cff_op_hintmask ? " hintmask"
+                                                  : " cntrmask" ));
+
+          /* implement vstem when needed --                        */
+          /* the specification doesn't say it, but this also works */
+          /* with the 'cntrmask' operator                          */
+          /*                                                       */
+          if ( num_args > 0 )
+          {
+            if ( hinter )
+              hinter->stems( hinter->hints,
+                             0,
+                             num_args / 2,
+                             args - ( num_args & ~1 ) );
+
+            decoder->num_hints += num_args / 2;
+          }
+
+          /* In a valid charstring there must be at least one byte */
+          /* after `hintmask' or `cntrmask' (e.g., for a `return'  */
+          /* instruction).  Additionally, there must be space for  */
+          /* `num_hints' bits.                                     */
+
+          if ( ( ip + ( ( decoder->num_hints + 7 ) >> 3 ) ) >= limit )
+            goto Syntax_Error;
+
+          if ( hinter )
+          {
+            if ( op == cff_op_hintmask )
+              hinter->hintmask( hinter->hints,
+                                (FT_UInt)builder->current->n_points,
+                                (FT_UInt)decoder->num_hints,
+                                ip );
+            else
+              hinter->counter( hinter->hints,
+                               (FT_UInt)decoder->num_hints,
+                               ip );
+          }
+
+#ifdef FT_DEBUG_LEVEL_TRACE
+          {
+            FT_UInt  maskbyte;
+
+
+            FT_TRACE4(( " (maskbytes:" ));
+
+            for ( maskbyte = 0;
+                  maskbyte < (FT_UInt)( ( decoder->num_hints + 7 ) >> 3 );
+                  maskbyte++, ip++ )
+              FT_TRACE4(( " 0x%02X", *ip ));
+
+            FT_TRACE4(( ")\n" ));
+          }
+#else
+          ip += ( decoder->num_hints + 7 ) >> 3;
+#endif
+          args = stack;
+          break;
+
+        case cff_op_rmoveto:
+          FT_TRACE4(( " rmoveto\n" ));
+
+          cff_builder_close_contour( builder );
+          builder->path_begun = 0;
+          x    = ADD_LONG( x, args[-2] );
+          y    = ADD_LONG( y, args[-1] );
+          args = stack;
+          break;
+
+        case cff_op_vmoveto:
+          FT_TRACE4(( " vmoveto\n" ));
+
+          cff_builder_close_contour( builder );
+          builder->path_begun = 0;
+          y    = ADD_LONG( y, args[-1] );
+          args = stack;
+          break;
+
+        case cff_op_hmoveto:
+          FT_TRACE4(( " hmoveto\n" ));
+
+          cff_builder_close_contour( builder );
+          builder->path_begun = 0;
+          x    = ADD_LONG( x, args[-1] );
+          args = stack;
+          break;
+
+        case cff_op_rlineto:
+          FT_TRACE4(( " rlineto\n" ));
+
+          if ( cff_builder_start_point( builder, x, y )  ||
+               cff_check_points( builder, num_args / 2 ) )
+            goto Fail;
+
+          if ( num_args < 2 )
+            goto Stack_Underflow;
+
+          args -= num_args & ~1;
+          while ( args < decoder->top )
+          {
+            x = ADD_LONG( x, args[0] );
+            y = ADD_LONG( y, args[1] );
+            cff_builder_add_point( builder, x, y, 1 );
+            args += 2;
+          }
+          args = stack;
+          break;
+
+        case cff_op_hlineto:
+        case cff_op_vlineto:
+          {
+            FT_Int  phase = ( op == cff_op_hlineto );
+
+
+            FT_TRACE4(( "%s\n", op == cff_op_hlineto ? " hlineto"
+                                                     : " vlineto" ));
+
+            if ( num_args < 0 )
+              goto Stack_Underflow;
+
+            /* there exist subsetted fonts (found in PDFs) */
+            /* which call `hlineto' without arguments      */
+            if ( num_args == 0 )
+              break;
+
+            if ( cff_builder_start_point( builder, x, y ) ||
+                 cff_check_points( builder, num_args )    )
+              goto Fail;
+
+            args = stack;
+            while ( args < decoder->top )
+            {
+              if ( phase )
+                x = ADD_LONG( x, args[0] );
+              else
+                y = ADD_LONG( y, args[0] );
+
+              if ( cff_builder_add_point1( builder, x, y ) )
+                goto Fail;
+
+              args++;
+              phase ^= 1;
+            }
+            args = stack;
+          }
+          break;
+
+        case cff_op_rrcurveto:
+          {
+            FT_Int  nargs;
+
+
+            FT_TRACE4(( " rrcurveto\n" ));
+
+            if ( num_args < 6 )
+              goto Stack_Underflow;
+
+            nargs = num_args - num_args % 6;
+
+            if ( cff_builder_start_point( builder, x, y ) ||
+                 cff_check_points( builder, nargs / 2 )   )
+              goto Fail;
+
+            args -= nargs;
+            while ( args < decoder->top )
+            {
+              x = ADD_LONG( x, args[0] );
+              y = ADD_LONG( y, args[1] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[2] );
+              y = ADD_LONG( y, args[3] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[4] );
+              y = ADD_LONG( y, args[5] );
+              cff_builder_add_point( builder, x, y, 1 );
+
+              args += 6;
+            }
+            args = stack;
+          }
+          break;
+
+        case cff_op_vvcurveto:
+          {
+            FT_Int  nargs;
+
+
+            FT_TRACE4(( " vvcurveto\n" ));
+
+            if ( num_args < 4 )
+              goto Stack_Underflow;
+
+            /* if num_args isn't of the form 4n or 4n+1, */
+            /* we enforce it by clearing the second bit  */
+
+            nargs = num_args & ~2;
+
+            if ( cff_builder_start_point( builder, x, y ) )
+              goto Fail;
+
+            args -= nargs;
+
+            if ( nargs & 1 )
+            {
+              x = ADD_LONG( x, args[0] );
+              args++;
+              nargs--;
+            }
+
+            if ( cff_check_points( builder, 3 * ( nargs / 4 ) ) )
+              goto Fail;
+
+            while ( args < decoder->top )
+            {
+              y = ADD_LONG( y, args[0] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[1] );
+              y = ADD_LONG( y, args[2] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              y = ADD_LONG( y, args[3] );
+              cff_builder_add_point( builder, x, y, 1 );
+
+              args += 4;
+            }
+            args = stack;
+          }
+          break;
+
+        case cff_op_hhcurveto:
+          {
+            FT_Int  nargs;
+
+
+            FT_TRACE4(( " hhcurveto\n" ));
+
+            if ( num_args < 4 )
+              goto Stack_Underflow;
+
+            /* if num_args isn't of the form 4n or 4n+1, */
+            /* we enforce it by clearing the second bit  */
+
+            nargs = num_args & ~2;
+
+            if ( cff_builder_start_point( builder, x, y ) )
+              goto Fail;
+
+            args -= nargs;
+            if ( nargs & 1 )
+            {
+              y = ADD_LONG( y, args[0] );
+              args++;
+              nargs--;
+            }
+
+            if ( cff_check_points( builder, 3 * ( nargs / 4 ) ) )
+              goto Fail;
+
+            while ( args < decoder->top )
+            {
+              x = ADD_LONG( x, args[0] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[1] );
+              y = ADD_LONG( y, args[2] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[3] );
+              cff_builder_add_point( builder, x, y, 1 );
+
+              args += 4;
+            }
+            args = stack;
+          }
+          break;
+
+        case cff_op_vhcurveto:
+        case cff_op_hvcurveto:
+          {
+            FT_Int  phase;
+            FT_Int  nargs;
+
+
+            FT_TRACE4(( "%s\n", op == cff_op_vhcurveto ? " vhcurveto"
+                                                       : " hvcurveto" ));
+
+            if ( cff_builder_start_point( builder, x, y ) )
+              goto Fail;
+
+            if ( num_args < 4 )
+              goto Stack_Underflow;
+
+            /* if num_args isn't of the form 8n, 8n+1, 8n+4, or 8n+5, */
+            /* we enforce it by clearing the second bit               */
+
+            nargs = num_args & ~2;
+
+            args -= nargs;
+            if ( cff_check_points( builder, ( nargs / 4 ) * 3 ) )
+              goto Stack_Underflow;
+
+            phase = ( op == cff_op_hvcurveto );
+
+            while ( nargs >= 4 )
+            {
+              nargs -= 4;
+              if ( phase )
+              {
+                x = ADD_LONG( x, args[0] );
+                cff_builder_add_point( builder, x, y, 0 );
+
+                x = ADD_LONG( x, args[1] );
+                y = ADD_LONG( y, args[2] );
+                cff_builder_add_point( builder, x, y, 0 );
+
+                y = ADD_LONG( y, args[3] );
+                if ( nargs == 1 )
+                  x = ADD_LONG( x, args[4] );
+                cff_builder_add_point( builder, x, y, 1 );
+              }
+              else
+              {
+                y = ADD_LONG( y, args[0] );
+                cff_builder_add_point( builder, x, y, 0 );
+
+                x = ADD_LONG( x, args[1] );
+                y = ADD_LONG( y, args[2] );
+                cff_builder_add_point( builder, x, y, 0 );
+
+                x = ADD_LONG( x, args[3] );
+                if ( nargs == 1 )
+                  y = ADD_LONG( y, args[4] );
+                cff_builder_add_point( builder, x, y, 1 );
+              }
+              args  += 4;
+              phase ^= 1;
+            }
+            args = stack;
+          }
+          break;
+
+        case cff_op_rlinecurve:
+          {
+            FT_Int  num_lines;
+            FT_Int  nargs;
+
+
+            FT_TRACE4(( " rlinecurve\n" ));
+
+            if ( num_args < 8 )
+              goto Stack_Underflow;
+
+            nargs     = num_args & ~1;
+            num_lines = ( nargs - 6 ) / 2;
+
+            if ( cff_builder_start_point( builder, x, y )   ||
+                 cff_check_points( builder, num_lines + 3 ) )
+              goto Fail;
+
+            args -= nargs;
+
+            /* first, add the line segments */
+            while ( num_lines > 0 )
+            {
+              x = ADD_LONG( x, args[0] );
+              y = ADD_LONG( y, args[1] );
+              cff_builder_add_point( builder, x, y, 1 );
+
+              args += 2;
+              num_lines--;
+            }
+
+            /* then the curve */
+            x = ADD_LONG( x, args[0] );
+            y = ADD_LONG( y, args[1] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            x = ADD_LONG( x, args[2] );
+            y = ADD_LONG( y, args[3] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            x = ADD_LONG( x, args[4] );
+            y = ADD_LONG( y, args[5] );
+            cff_builder_add_point( builder, x, y, 1 );
+
+            args = stack;
+          }
+          break;
+
+        case cff_op_rcurveline:
+          {
+            FT_Int  num_curves;
+            FT_Int  nargs;
+
+
+            FT_TRACE4(( " rcurveline\n" ));
+
+            if ( num_args < 8 )
+              goto Stack_Underflow;
+
+            nargs      = num_args - 2;
+            nargs      = nargs - nargs % 6 + 2;
+            num_curves = ( nargs - 2 ) / 6;
+
+            if ( cff_builder_start_point( builder, x, y )        ||
+                 cff_check_points( builder, num_curves * 3 + 2 ) )
+              goto Fail;
+
+            args -= nargs;
+
+            /* first, add the curves */
+            while ( num_curves > 0 )
+            {
+              x = ADD_LONG( x, args[0] );
+              y = ADD_LONG( y, args[1] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[2] );
+              y = ADD_LONG( y, args[3] );
+              cff_builder_add_point( builder, x, y, 0 );
+
+              x = ADD_LONG( x, args[4] );
+              y = ADD_LONG( y, args[5] );
+              cff_builder_add_point( builder, x, y, 1 );
+
+              args += 6;
+              num_curves--;
+            }
+
+            /* then the final line */
+            x = ADD_LONG( x, args[0] );
+            y = ADD_LONG( y, args[1] );
+            cff_builder_add_point( builder, x, y, 1 );
+
+            args = stack;
+          }
+          break;
+
+        case cff_op_hflex1:
+          {
+            FT_Pos  start_y;
+
+
+            FT_TRACE4(( " hflex1\n" ));
+
+            /* adding five more points: 4 control points, 1 on-curve point */
+            /* -- make sure we have enough space for the start point if it */
+            /* needs to be added                                           */
+            if ( cff_builder_start_point( builder, x, y ) ||
+                 cff_check_points( builder, 6 )           )
+              goto Fail;
+
+            /* record the starting point's y position for later use */
+            start_y = y;
+
+            /* first control point */
+            x = ADD_LONG( x, args[0] );
+            y = ADD_LONG( y, args[1] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* second control point */
+            x = ADD_LONG( x, args[2] );
+            y = ADD_LONG( y, args[3] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* join point; on curve, with y-value the same as the last */
+            /* control point's y-value                                 */
+            x = ADD_LONG( x, args[4] );
+            cff_builder_add_point( builder, x, y, 1 );
+
+            /* third control point, with y-value the same as the join */
+            /* point's y-value                                        */
+            x = ADD_LONG( x, args[5] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* fourth control point */
+            x = ADD_LONG( x, args[6] );
+            y = ADD_LONG( y, args[7] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* ending point, with y-value the same as the start   */
+            x = ADD_LONG( x, args[8] );
+            y = start_y;
+            cff_builder_add_point( builder, x, y, 1 );
+
+            args = stack;
+            break;
+          }
+
+        case cff_op_hflex:
+          {
+            FT_Pos  start_y;
+
+
+            FT_TRACE4(( " hflex\n" ));
+
+            /* adding six more points; 4 control points, 2 on-curve points */
+            if ( cff_builder_start_point( builder, x, y ) ||
+                 cff_check_points( builder, 6 )           )
+              goto Fail;
+
+            /* record the starting point's y-position for later use */
+            start_y = y;
+
+            /* first control point */
+            x = ADD_LONG( x, args[0] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* second control point */
+            x = ADD_LONG( x, args[1] );
+            y = ADD_LONG( y, args[2] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* join point; on curve, with y-value the same as the last */
+            /* control point's y-value                                 */
+            x = ADD_LONG( x, args[3] );
+            cff_builder_add_point( builder, x, y, 1 );
+
+            /* third control point, with y-value the same as the join */
+            /* point's y-value                                        */
+            x = ADD_LONG( x, args[4] );
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* fourth control point */
+            x = ADD_LONG( x, args[5] );
+            y = start_y;
+            cff_builder_add_point( builder, x, y, 0 );
+
+            /* ending point, with y-value the same as the start point's */
+            /* y-value -- we don't add this point, though               */
+            x = ADD_LONG( x, args[6] );
+            cff_builder_add_point( builder, x, y, 1 );
+
+            args = stack;
+            break;
+          }
+
+        case cff_op_flex1:
+          {
+            FT_Pos     start_x, start_y; /* record start x, y values for */
+                                         /* alter use                    */
+            FT_Fixed   dx = 0, dy = 0;   /* used in horizontal/vertical  */
+                                         /* algorithm below              */
+            FT_Int     horizontal, count;
+            FT_Fixed*  temp;
+
+
+            FT_TRACE4(( " flex1\n" ));
+
+            /* adding six more points; 4 control points, 2 on-curve points */
+            if ( cff_builder_start_point( builder, x, y ) ||
+                 cff_check_points( builder, 6 )           )
+              goto Fail;
+
+            /* record the starting point's x, y position for later use */
+            start_x = x;
+            start_y = y;
+
+            /* XXX: figure out whether this is supposed to be a horizontal */
+            /*      or vertical flex; the Type 2 specification is vague... */
+
+            temp = args;
+
+            /* grab up to the last argument */
+            for ( count = 5; count > 0; count-- )
+            {
+              dx    = ADD_LONG( dx, temp[0] );
+              dy    = ADD_LONG( dy, temp[1] );
+              temp += 2;
+            }
+
+            if ( dx < 0 )
+              dx = NEG_LONG( dx );
+            if ( dy < 0 )
+              dy = NEG_LONG( dy );
+
+            /* strange test, but here it is... */
+            horizontal = ( dx > dy );
+
+            for ( count = 5; count > 0; count-- )
+            {
+              x = ADD_LONG( x, args[0] );
+              y = ADD_LONG( y, args[1] );
+              cff_builder_add_point( builder, x, y,
+                                     FT_BOOL( count == 3 ) );
+              args += 2;
+            }
+
+            /* is last operand an x- or y-delta? */
+            if ( horizontal )
+            {
+              x = ADD_LONG( x, args[0] );
+              y = start_y;
+            }
+            else
+            {
+              x = start_x;
+              y = ADD_LONG( y, args[0] );
+            }
+
+            cff_builder_add_point( builder, x, y, 1 );
+
+            args = stack;
+            break;
+           }
+
+        case cff_op_flex:
+          {
+            FT_UInt  count;
+
+
+            FT_TRACE4(( " flex\n" ));
+
+            if ( cff_builder_start_point( builder, x, y ) ||
+                 cff_check_points( builder, 6 )           )
+              goto Fail;
+
+            for ( count = 6; count > 0; count-- )
+            {
+              x = ADD_LONG( x, args[0] );
+              y = ADD_LONG( y, args[1] );
+              cff_builder_add_point( builder, x, y,
+                                     FT_BOOL( count == 4 || count == 1 ) );
+              args += 2;
+            }
+
+            args = stack;
+          }
+          break;
+
+        case cff_op_seac:
+          FT_TRACE4(( " seac\n" ));
+
+          error = cff_operator_seac( decoder,
+                                     args[0], args[1], args[2],
+                                     (FT_Int)( args[3] >> 16 ),
+                                     (FT_Int)( args[4] >> 16 ) );
+
+          /* add current outline to the glyph slot */
+          FT_GlyphLoader_Add( builder->loader );
+
+          /* return now! */
+          FT_TRACE4(( "\n" ));
+          return error;
+
+        case cff_op_endchar:
+          /* in dictionaries, `endchar' simply indicates end of data */
+          if ( in_dict )
+            return error;
+
+          FT_TRACE4(( " endchar\n" ));
+
+          /* We are going to emulate the seac operator. */
+          if ( num_args >= 4 )
+          {
+            /* Save glyph width so that the subglyphs don't overwrite it. */
+            FT_Pos  glyph_width = decoder->glyph_width;
+
+
+            error = cff_operator_seac( decoder,
+                                       0L, args[-4], args[-3],
+                                       (FT_Int)( args[-2] >> 16 ),
+                                       (FT_Int)( args[-1] >> 16 ) );
+
+            decoder->glyph_width = glyph_width;
+          }
+          else
+          {
+            cff_builder_close_contour( builder );
+
+            /* close hints recording session */
+            if ( hinter )
+            {
+              if ( hinter->close( hinter->hints,
+                                  (FT_UInt)builder->current->n_points ) )
+                goto Syntax_Error;
+
+              /* apply hints to the loaded glyph outline now */
+              error = hinter->apply( hinter->hints,
+                                     builder->current,
+                                     (PSH_Globals)builder->hints_globals,
+                                     decoder->hint_mode );
+              if ( error )
+                goto Fail;
+            }
+
+            /* add current outline to the glyph slot */
+            FT_GlyphLoader_Add( builder->loader );
+          }
+
+          /* return now! */
+          FT_TRACE4(( "\n" ));
+          return error;
+
+        case cff_op_abs:
+          FT_TRACE4(( " abs\n" ));
+
+          if ( args[0] < 0 )
+          {
+            if ( args[0] == FT_LONG_MIN )
+              args[0] = FT_LONG_MAX;
+            else
+              args[0] = -args[0];
+          }
+          args++;
+          break;
+
+        case cff_op_add:
+          FT_TRACE4(( " add\n" ));
+
+          args[0] = ADD_LONG( args[0], args[1] );
+          args++;
+          break;
+
+        case cff_op_sub:
+          FT_TRACE4(( " sub\n" ));
+
+          args[0] = SUB_LONG( args[0], args[1] );
+          args++;
+          break;
+
+        case cff_op_div:
+          FT_TRACE4(( " div\n" ));
+
+          args[0] = FT_DivFix( args[0], args[1] );
+          args++;
+          break;
+
+        case cff_op_neg:
+          FT_TRACE4(( " neg\n" ));
+
+          if ( args[0] == FT_LONG_MIN )
+            args[0] = FT_LONG_MAX;
+          args[0] = -args[0];
+          args++;
+          break;
+
+        case cff_op_random:
+          {
+            FT_UInt32*  randval = in_dict ? &decoder->cff->top_font.random
+                                          : &decoder->current_subfont->random;
+
+
+            FT_TRACE4(( " random\n" ));
+
+            /* only use the lower 16 bits of `random'  */
+            /* to generate a number in the range (0;1] */
+            args[0] = (FT_Fixed)( ( *randval & 0xFFFF ) + 1 );
+            args++;
+
+            *randval = cff_random( *randval );
+          }
+          break;
+
+        case cff_op_mul:
+          FT_TRACE4(( " mul\n" ));
+
+          args[0] = FT_MulFix( args[0], args[1] );
+          args++;
+          break;
+
+        case cff_op_sqrt:
+          FT_TRACE4(( " sqrt\n" ));
+
+          /* without upper limit the loop below might not finish */
+          if ( args[0] > 0x7FFFFFFFL )
+            args[0] = 0xB504F4L;    /* sqrt( 32768.0044 ) */
+          else if ( args[0] > 0 )
+            args[0] = (FT_Fixed)FT_SqrtFixed( args[0] );
+          else
+            args[0] = 0;
+          args++;
+          break;
+
+        case cff_op_drop:
+          /* nothing */
+          FT_TRACE4(( " drop\n" ));
+
+          break;
+
+        case cff_op_exch:
+          {
+            FT_Fixed  tmp;
+
+
+            FT_TRACE4(( " exch\n" ));
+
+            tmp     = args[0];
+            args[0] = args[1];
+            args[1] = tmp;
+            args   += 2;
+          }
+          break;
+
+        case cff_op_index:
+          {
+            FT_Int  idx = (FT_Int)( args[0] >> 16 );
+
+
+            FT_TRACE4(( " index\n" ));
+
+            if ( idx < 0 )
+              idx = 0;
+            else if ( idx > num_args - 2 )
+              idx = num_args - 2;
+            args[0] = args[-( idx + 1 )];
+            args++;
+          }
+          break;
+
+        case cff_op_roll:
+          {
+            FT_Int  count = (FT_Int)( args[0] >> 16 );
+            FT_Int  idx   = (FT_Int)( args[1] >> 16 );
+
+
+            FT_TRACE4(( " roll\n" ));
+
+            if ( count <= 0 )
+              count = 1;
+
+            args -= count;
+            if ( args < stack )
+              goto Stack_Underflow;
+
+            if ( idx >= 0 )
+            {
+              idx = idx % count;
+              while ( idx > 0 )
+              {
+                FT_Fixed  tmp = args[count - 1];
+                FT_Int    i;
+
+
+                for ( i = count - 2; i >= 0; i-- )
+                  args[i + 1] = args[i];
+                args[0] = tmp;
+                idx--;
+              }
+            }
+            else
+            {
+              /* before C99 it is implementation-defined whether    */
+              /* the result of `%' is negative if the first operand */
+              /* is negative                                        */
+              idx = -( NEG_INT( idx ) % count );
+              while ( idx < 0 )
+              {
+                FT_Fixed  tmp = args[0];
+                FT_Int    i;
+
+
+                for ( i = 0; i < count - 1; i++ )
+                  args[i] = args[i + 1];
+                args[count - 1] = tmp;
+                idx++;
+              }
+            }
+            args += count;
+          }
+          break;
+
+        case cff_op_dup:
+          FT_TRACE4(( " dup\n" ));
+
+          args[1] = args[0];
+          args   += 2;
+          break;
+
+        case cff_op_put:
+          {
+            FT_Fixed  val = args[0];
+            FT_UInt   idx = (FT_UInt)( args[1] >> 16 );
+
+
+            FT_TRACE4(( " put\n" ));
+
+            /* the Type2 specification before version 16-March-2000 */
+            /* didn't give a hard-coded size limit of the temporary */
+            /* storage array; instead, an argument of the           */
+            /* `MultipleMaster' operator set the size               */
+            if ( idx < CFF_MAX_TRANS_ELEMENTS )
+              decoder->buildchar[idx] = val;
+          }
+          break;
+
+        case cff_op_get:
+          {
+            FT_UInt   idx = (FT_UInt)( args[0] >> 16 );
+            FT_Fixed  val = 0;
+
+
+            FT_TRACE4(( " get\n" ));
+
+            if ( idx < CFF_MAX_TRANS_ELEMENTS )
+              val = decoder->buildchar[idx];
+
+            args[0] = val;
+            args++;
+          }
+          break;
+
+        case cff_op_store:
+          /* this operator was removed from the Type2 specification */
+          /* in version 16-March-2000                               */
+
+          /* since we currently don't handle interpolation of multiple */
+          /* master fonts, this is a no-op                             */
+          FT_TRACE4(( " store\n" ));
+          break;
+
+        case cff_op_load:
+          /* this operator was removed from the Type2 specification */
+          /* in version 16-March-2000                               */
+          {
+            FT_UInt  reg_idx = (FT_UInt)args[0];
+            FT_UInt  idx     = (FT_UInt)args[1];
+            FT_UInt  count   = (FT_UInt)args[2];
+
+
+            FT_TRACE4(( " load\n" ));
+
+            /* since we currently don't handle interpolation of multiple */
+            /* master fonts, we store a vector [1 0 0 ...] in the        */
+            /* temporary storage array regardless of the Registry index  */
+            if ( reg_idx <= 2                 &&
+                 idx < CFF_MAX_TRANS_ELEMENTS &&
+                 count <= num_axes            )
+            {
+              FT_UInt  end, i;
+
+
+              end = FT_MIN( idx + count, CFF_MAX_TRANS_ELEMENTS );
+
+              if ( idx < end )
+                decoder->buildchar[idx] = 1 << 16;
+
+              for ( i = idx + 1; i < end; i++ )
+                decoder->buildchar[i] = 0;
+            }
+          }
+          break;
+
+        case cff_op_blend:
+          /* this operator was removed from the Type2 specification */
+          /* in version 16-March-2000                               */
+          if ( num_designs )
+          {
+            FT_Int  num_results = (FT_Int)( args[0] >> 16 );
+
+
+            FT_TRACE4(( " blend\n" ));
+
+            if ( num_results < 0 )
+              goto Syntax_Error;
+
+            if ( num_results > num_args                       ||
+                 num_results * (FT_Int)num_designs > num_args )
+              goto Stack_Underflow;
+
+            /* since we currently don't handle interpolation of multiple */
+            /* master fonts, return the `num_results' values of the      */
+            /* first master                                              */
+            args     -= num_results * ( num_designs - 1 );
+            num_args -= num_results * ( num_designs - 1 );
+          }
+          else
+            goto Syntax_Error;
+          break;
+
+        case cff_op_dotsection:
+          /* this operator is deprecated and ignored by the parser */
+          FT_TRACE4(( " dotsection\n" ));
+          break;
+
+        case cff_op_closepath:
+          /* this is an invalid Type 2 operator; however, there        */
+          /* exist fonts which are incorrectly converted from probably */
+          /* Type 1 to CFF, and some parsers seem to accept it         */
+
+          FT_TRACE4(( " closepath (invalid op)\n" ));
+
+          args = stack;
+          break;
+
+        case cff_op_hsbw:
+          /* this is an invalid Type 2 operator; however, there        */
+          /* exist fonts which are incorrectly converted from probably */
+          /* Type 1 to CFF, and some parsers seem to accept it         */
+
+          FT_TRACE4(( " hsbw (invalid op)\n" ));
+
+          decoder->glyph_width =
+            ADD_LONG( decoder->nominal_width, ( args[1] >> 16 ) );
+
+          decoder->builder.left_bearing.x = args[0];
+          decoder->builder.left_bearing.y = 0;
+
+          x    = ADD_LONG( decoder->builder.pos_x, args[0] );
+          y    = decoder->builder.pos_y;
+          args = stack;
+          break;
+
+        case cff_op_sbw:
+          /* this is an invalid Type 2 operator; however, there        */
+          /* exist fonts which are incorrectly converted from probably */
+          /* Type 1 to CFF, and some parsers seem to accept it         */
+
+          FT_TRACE4(( " sbw (invalid op)\n" ));
+
+          decoder->glyph_width =
+            ADD_LONG( decoder->nominal_width, ( args[2] >> 16 ) );
+
+          decoder->builder.left_bearing.x = args[0];
+          decoder->builder.left_bearing.y = args[1];
+
+          x    = ADD_LONG( decoder->builder.pos_x, args[0] );
+          y    = ADD_LONG( decoder->builder.pos_y, args[1] );
+          args = stack;
+          break;
+
+        case cff_op_setcurrentpoint:
+          /* this is an invalid Type 2 operator; however, there        */
+          /* exist fonts which are incorrectly converted from probably */
+          /* Type 1 to CFF, and some parsers seem to accept it         */
+
+          FT_TRACE4(( " setcurrentpoint (invalid op)\n" ));
+
+          x    = ADD_LONG( decoder->builder.pos_x, args[0] );
+          y    = ADD_LONG( decoder->builder.pos_y, args[1] );
+          args = stack;
+          break;
+
+        case cff_op_callothersubr:
+          {
+            FT_Fixed  arg;
+
+
+            /* this is an invalid Type 2 operator; however, there      */
+            /* exist fonts which are incorrectly converted from        */
+            /* probably Type 1 to CFF, and some parsers seem to accept */
+            /* it                                                      */
+
+            FT_TRACE4(( " callothersubr (invalid op)\n" ));
+
+            /* subsequent `pop' operands should add the arguments,     */
+            /* this is the implementation described for `unknown'      */
+            /* other subroutines in the Type1 spec.                    */
+            /*                                                         */
+            /* XXX Fix return arguments (see discussion below).        */
+
+            arg = 2 + ( args[-2] >> 16 );
+            if ( arg >= CFF_MAX_OPERANDS )
+              goto Stack_Underflow;
+
+            args -= arg;
+            if ( args < stack )
+              goto Stack_Underflow;
+          }
+          break;
+
+        case cff_op_pop:
+          /* this is an invalid Type 2 operator; however, there        */
+          /* exist fonts which are incorrectly converted from probably */
+          /* Type 1 to CFF, and some parsers seem to accept it         */
+
+          FT_TRACE4(( " pop (invalid op)\n" ));
+
+          /* XXX Increasing `args' is wrong: After a certain number of */
+          /* `pop's we get a stack overflow.  Reason for doing it is   */
+          /* code like this (actually found in a CFF font):            */
+          /*                                                           */
+          /*   17 1 3 callothersubr                                    */
+          /*   pop                                                     */
+          /*   callsubr                                                */
+          /*                                                           */
+          /* Since we handle `callothersubr' as a no-op, and           */
+          /* `callsubr' needs at least one argument, `pop' can't be a  */
+          /* no-op too as it basically should be.                      */
+          /*                                                           */
+          /* The right solution would be to provide real support for   */
+          /* `callothersubr' as done in `t1decode.c', however, given   */
+          /* the fact that CFF fonts with `pop' are invalid, it is     */
+          /* questionable whether it is worth the time.                */
+          args++;
+          break;
+
+        case cff_op_and:
+          {
+            FT_Fixed  cond = ( args[0] && args[1] );
+
+
+            FT_TRACE4(( " and\n" ));
+
+            args[0] = cond ? 0x10000L : 0;
+            args++;
+          }
+          break;
+
+        case cff_op_or:
+          {
+            FT_Fixed  cond = ( args[0] || args[1] );
+
+
+            FT_TRACE4(( " or\n" ));
+
+            args[0] = cond ? 0x10000L : 0;
+            args++;
+          }
+          break;
+
+        case cff_op_not:
+          {
+            FT_Fixed  cond = !args[0];
+
+
+            FT_TRACE4(( " not\n" ));
+
+            args[0] = cond ? 0x10000L : 0;
+            args++;
+          }
+          break;
+
+        case cff_op_eq:
+          {
+            FT_Fixed  cond = ( args[0] == args[1] );
+
+
+            FT_TRACE4(( " eq\n" ));
+
+            args[0] = cond ? 0x10000L : 0;
+            args++;
+          }
+          break;
+
+        case cff_op_ifelse:
+          {
+            FT_Fixed  cond = ( args[2] <= args[3] );
+
+
+            FT_TRACE4(( " ifelse\n" ));
+
+            if ( !cond )
+              args[0] = args[1];
+            args++;
+          }
+          break;
+
+        case cff_op_callsubr:
+          {
+            FT_UInt  idx = (FT_UInt)( ( args[0] >> 16 ) +
+                                      decoder->locals_bias );
+
+
+            FT_TRACE4(( " callsubr (idx %d, entering level %td)\n",
+                        idx,
+                        zone - decoder->zones + 1 ));
+
+            if ( idx >= decoder->num_locals )
+            {
+              FT_ERROR(( "cff_decoder_parse_charstrings:"
+                         " invalid local subr index\n" ));
+              goto Syntax_Error;
+            }
+
+            if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS )
+            {
+              FT_ERROR(( "cff_decoder_parse_charstrings:"
+                         " too many nested subrs\n" ));
+              goto Syntax_Error;
+            }
+
+            zone->cursor = ip;  /* save current instruction pointer */
+
+            zone++;
+            zone->base   = decoder->locals[idx];
+            zone->limit  = decoder->locals[idx + 1];
+            zone->cursor = zone->base;
+
+            if ( !zone->base || zone->limit == zone->base )
+            {
+              FT_ERROR(( "cff_decoder_parse_charstrings:"
+                         " invoking empty subrs\n" ));
+              goto Syntax_Error;
+            }
+
+            decoder->zone = zone;
+            ip            = zone->base;
+            limit         = zone->limit;
+          }
+          break;
+
+        case cff_op_callgsubr:
+          {
+            FT_UInt  idx = (FT_UInt)( ( args[0] >> 16 ) +
+                                      decoder->globals_bias );
+
+
+            FT_TRACE4(( " callgsubr (idx %d, entering level %td)\n",
+                        idx,
+                        zone - decoder->zones + 1 ));
+
+            if ( idx >= decoder->num_globals )
+            {
+              FT_ERROR(( "cff_decoder_parse_charstrings:"
+                         " invalid global subr index\n" ));
+              goto Syntax_Error;
+            }
+
+            if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS )
+            {
+              FT_ERROR(( "cff_decoder_parse_charstrings:"
+                         " too many nested subrs\n" ));
+              goto Syntax_Error;
+            }
+
+            zone->cursor = ip;  /* save current instruction pointer */
+
+            zone++;
+            zone->base   = decoder->globals[idx];
+            zone->limit  = decoder->globals[idx + 1];
+            zone->cursor = zone->base;
+
+            if ( !zone->base || zone->limit == zone->base )
+            {
+              FT_ERROR(( "cff_decoder_parse_charstrings:"
+                         " invoking empty subrs\n" ));
+              goto Syntax_Error;
+            }
+
+            decoder->zone = zone;
+            ip            = zone->base;
+            limit         = zone->limit;
+          }
+          break;
+
+        case cff_op_return:
+          FT_TRACE4(( " return (leaving level %td)\n",
+                      decoder->zone - decoder->zones ));
+
+          if ( decoder->zone <= decoder->zones )
+          {
+            FT_ERROR(( "cff_decoder_parse_charstrings:"
+                       " unexpected return\n" ));
+            goto Syntax_Error;
+          }
+
+          decoder->zone--;
+          zone  = decoder->zone;
+          ip    = zone->cursor;
+          limit = zone->limit;
+          break;
+
+        default:
+          FT_ERROR(( "Unimplemented opcode: %d", ip[-1] ));
+
+          if ( ip[-1] == 12 )
+            FT_ERROR(( " %d", ip[0] ));
+          FT_ERROR(( "\n" ));
+
+          return FT_THROW( Unimplemented_Feature );
+        }
+
+        decoder->top = args;
+
+        if ( decoder->top - stack >= CFF_MAX_OPERANDS )
+          goto Stack_Overflow;
+
+      } /* general operator processing */
+
+    } /* while ip < limit */
+
+    FT_TRACE4(( "..end..\n" ));
+    FT_TRACE4(( "\n" ));
+
+  Fail:
+    return error;
+
+  MM_Error:
+    FT_TRACE4(( "cff_decoder_parse_charstrings:"
+                " invalid opcode found in top DICT charstring\n"));
+    return FT_THROW( Invalid_File_Format );
+
+  Syntax_Error:
+    FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error\n" ));
+    return FT_THROW( Invalid_File_Format );
+
+  Stack_Underflow:
+    FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow\n" ));
+    return FT_THROW( Too_Few_Arguments );
+
+  Stack_Overflow:
+    FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow\n" ));
+    return FT_THROW( Stack_Overflow );
+  }
+
+#endif /* CFF_CONFIG_OPTION_OLD_ENGINE */
+
+
+  /**************************************************************************
+   *
+   * @Function:
+   *   cff_decoder_init
+   *
+   * @Description:
+   *   Initializes a given glyph decoder.
+   *
+   * @InOut:
+   *   decoder ::
+   *     A pointer to the glyph builder to initialize.
+   *
+   * @Input:
+   *   face ::
+   *     The current face object.
+   *
+   *   size ::
+   *     The current size object.
+   *
+   *   slot ::
+   *     The current glyph object.
+   *
+   *   hinting ::
+   *     Whether hinting is active.
+   *
+   *   hint_mode ::
+   *     The hinting mode.
+   */
+  FT_LOCAL_DEF( void )
+  cff_decoder_init( CFF_Decoder*                     decoder,
+                    TT_Face                          face,
+                    CFF_Size                         size,
+                    CFF_GlyphSlot                    slot,
+                    FT_Bool                          hinting,
+                    FT_Render_Mode                   hint_mode,
+                    CFF_Decoder_Get_Glyph_Callback   get_callback,
+                    CFF_Decoder_Free_Glyph_Callback  free_callback )
+  {
+    CFF_Font  cff = (CFF_Font)face->extra.data;
+
+
+    /* clear everything */
+    FT_ZERO( decoder );
+
+    /* initialize builder */
+    cff_builder_init( &decoder->builder, face, size, slot, hinting );
+
+    /* initialize Type2 decoder */
+    decoder->cff          = cff;
+    decoder->num_globals  = cff->global_subrs_index.count;
+    decoder->globals      = cff->global_subrs;
+    decoder->globals_bias = cff_compute_bias(
+                              cff->top_font.font_dict.charstring_type,
+                              decoder->num_globals );
+
+    decoder->hint_mode = hint_mode;
+
+    decoder->get_glyph_callback  = get_callback;
+    decoder->free_glyph_callback = free_callback;
+  }
+
+
+  /* this function is used to select the subfont */
+  /* and the locals subrs array                  */
+  FT_LOCAL_DEF( FT_Error )
+  cff_decoder_prepare( CFF_Decoder*  decoder,
+                       CFF_Size      size,
+                       FT_UInt       glyph_index )
+  {
+    CFF_Builder  *builder = &decoder->builder;
+    CFF_Font      cff     = (CFF_Font)builder->face->extra.data;
+    CFF_SubFont   sub     = &cff->top_font;
+    FT_Error      error   = FT_Err_Ok;
+
+    FT_Service_CFFLoad  cffload = (FT_Service_CFFLoad)cff->cffload;
+
+
+    /* manage CID fonts */
+    if ( cff->num_subfonts )
+    {
+      FT_Byte  fd_index = cffload->fd_select_get( &cff->fd_select,
+                                                  glyph_index );
+
+
+      if ( fd_index >= cff->num_subfonts )
+      {
+        FT_TRACE4(( "cff_decoder_prepare: invalid CID subfont index\n" ));
+        error = FT_THROW( Invalid_File_Format );
+        goto Exit;
+      }
+
+      FT_TRACE3(( "  in subfont %d:\n", fd_index ));
+
+      sub = cff->subfonts[fd_index];
+
+      if ( builder->hints_funcs && size )
+      {
+        FT_Size       ftsize   = FT_SIZE( size );
+        CFF_Internal  internal = (CFF_Internal)ftsize->internal->module_data;
+
+
+        /* for CFFs without subfonts, this value has already been set */
+        builder->hints_globals = (void *)internal->subfonts[fd_index];
+      }
+    }
+
+    decoder->num_locals  = sub->local_subrs_index.count;
+    decoder->locals      = sub->local_subrs;
+    decoder->locals_bias = cff_compute_bias(
+                             decoder->cff->top_font.font_dict.charstring_type,
+                             decoder->num_locals );
+
+    decoder->glyph_width   = sub->private_dict.default_width;
+    decoder->nominal_width = sub->private_dict.nominal_width;
+
+    decoder->current_subfont = sub;
+
+  Exit:
+    return error;
+  }
+
+
+/* END */