@hsu-react/ui 0.0.13 → 0.0.14

package/src/components/Chart/Pie/Pie3D/_utils/label.ts

@@ -13,7 +13,7 @@ interface LabelPoint {
   text: string;
   name: string;
   color: string;
-  originalY?: number; // 原始y坐标，用于调整
+  originalY?: number; // Original y coordinate, used when adjusting
 }
 
 interface LabelRect {
@@ -24,19 +24,19 @@ interface LabelRect {
   index: number;
 }
 
-// 估算标签的宽度和高度（基于文本长度和字体大小）
+// Estimate a label's width and height (based on text length and font size)
 const estimateLabelSize = (
   text: string,
   fontSize: number = 14,
   padding: number = 5
 ): { width: number; height: number } => {
-  // 简单估算：每个字符约占用 fontSize * 0.6 的宽度
+  // Rough estimate: each character takes about fontSize * 0.6 in width
   const estimatedWidth = text.length * fontSize * 0.6 + padding * 2;
   const estimatedHeight = fontSize + padding * 2;
   return { width: estimatedWidth, height: estimatedHeight };
 };
 
-// 检测两个矩形是否重叠
+// Check whether two rectangles overlap
 const isOverlapping = (rect1: LabelRect, rect2: LabelRect): boolean => {
   return (
     rect1.x < rect2.x + rect2.width &&
@@ -46,7 +46,7 @@ const isOverlapping = (rect1: LabelRect, rect2: LabelRect): boolean => {
   );
 };
 
-// 调整标签位置以避免重叠
+// Adjust label positions to avoid overlap
 const adjustLabelPositions = (
   labelPoints: LabelPoint[],
   labelTextStyle: { fontSize?: number; padding?: number }
@@ -56,15 +56,15 @@ const adjustLabelPositions = (
     ? labelTextStyle.padding[0] || 5
     : labelTextStyle.padding || 5;
 
-  // 将标签尺寸转换为3D坐标系的单位
-  // 假设字体大小和padding的单位需要转换为3D坐标系的相对单位
-  // 3D坐标系的范围大约是-1到1，所以需要适当的缩放
-  const scaleFactor = 0.01; // 将像素单位转换为3D坐标单位
+  // Convert label sizes into 3D coordinate units
+  // Font size and padding are in pixels and must be converted into relative 3D coordinate units
+  // The 3D coordinate range is roughly -1 to 1, so scaling is required
+  const scaleFactor = 0.01; // Converts pixel units into 3D coordinate units
 
-  // 创建标签矩形数组（在2D投影平面上，使用x和y坐标）
+  // Build the label rectangles (on the 2D projection plane, using x and y coordinates)
   const labelRects: LabelRect[] = labelPoints?.map((point) => {
     const size = estimateLabelSize(point.text, fontSize, padding);
-    // 将像素尺寸转换为3D坐标单位
+    // Convert pixel sizes into 3D coordinate units
     const width3D = size.width * scaleFactor;
     const height3D = size.height * scaleFactor;
     return {
@@ -72,25 +72,25 @@ const adjustLabelPositions = (
       y: point.y - height3D / 2,
       width: width3D,
       height: height3D,
-      index: 0, // 将在循环中设置
+      index: 0, // Assigned in the loop below
     };
   });
 
-  // 设置索引
+  // Assign indices
   labelRects?.forEach((rect, index) => {
     rect.index = index;
   });
 
-  // 保存原始坐标
+  // Save the original coordinates
   labelPoints?.forEach((point) => {
     point.originalY = point.y;
   });
 
-  // 检测并调整重叠的标签
-  const minSpacing = fontSize * scaleFactor * 0.3; // 最小间距（3D坐标单位）
+  // Detect and adjust overlapping labels
+  const minSpacing = fontSize * scaleFactor * 0.3; // Minimum spacing (in 3D coordinate units)
   let hasOverlap = true;
   let iterations = 0;
-  const maxIterations = 100; // 最大迭代次数
+  const maxIterations = 100; // Maximum number of iterations
 
   while (hasOverlap && iterations < maxIterations) {
     hasOverlap = false;
@@ -101,29 +101,29 @@ const adjustLabelPositions = (
         if (isOverlapping(labelRects[i], labelRects[j])) {
           hasOverlap = true;
 
-          // 计算两个标签的中心点
+          // Compute the center points of the two labels
           const center1X = labelRects[i].x + labelRects[i].width / 2;
           const center1Y = labelRects[i].y + labelRects[i].height / 2;
           const center2X = labelRects[j].x + labelRects[j].width / 2;
           const center2Y = labelRects[j].y + labelRects[j].height / 2;
 
-          // 计算x和y方向的距离
+          // Compute the distances along x and y
           const distanceX = Math.abs(center1X - center2X);
           const distanceY = Math.abs(center1Y - center2Y);
 
-          // 计算需要的距离
+          // Compute the required distances
           const requiredDistanceX =
             (labelRects[i].width + labelRects[j].width) / 2 + minSpacing;
           const requiredDistanceY =
             (labelRects[i].height + labelRects[j].height) / 2 + minSpacing;
 
-          // 根据重叠情况调整位置
+          // Adjust positions based on the overlap
           const originalY1 = labelPoints[i].originalY || labelPoints[i].y;
           const originalY2 = labelPoints[j].originalY || labelPoints[j].y;
           const originalX1 = labelPoints[i].x;
           const originalX2 = labelPoints[j].x;
 
-          // 优先调整y方向（垂直方向），因为这是最常见的重叠情况
+          // Prefer adjusting along y (vertically), since that is the most common overlap
           if (distanceY < requiredDistanceY) {
             const adjustmentY =
               (requiredDistanceY - distanceY) / 2 + minSpacing * 0.5;
@@ -137,7 +137,7 @@ const adjustLabelPositions = (
             }
           }
 
-          // 如果x方向也很接近，稍微调整x方向
+          // If the labels are also close along x, nudge them along x as well
           if (distanceX < requiredDistanceX * 0.9) {
             const adjustmentX = ((requiredDistanceX - distanceX) / 2) * 0.5;
 
@@ -150,7 +150,7 @@ const adjustLabelPositions = (
             }
           }
 
-          // 更新矩形位置
+          // Update the rectangle position
           const size1 = estimateLabelSize(
             labelPoints[i].text,
             fontSize,
@@ -288,9 +288,9 @@ const calculateLabelPoints = (
     });
   }
 
-  // 调整标签位置以避免重叠
+  // Adjust label positions to avoid overlap
   const labelTextStyle = label.textStyle || {};
-  // 处理 padding 可能是数组的情况
+  // Handle padding possibly being an array
   const adjustedTextStyle = {
     fontSize: labelTextStyle.fontSize,
     padding: Array.isArray(labelTextStyle.padding)
@@ -299,20 +299,20 @@ const calculateLabelPoints = (
   };
   const adjustedPoints = adjustLabelPositions(labelPoints, adjustedTextStyle);
 
-  // 更新标签线的终点和中间点位置以匹配调整后的标签位置
+  // Update each leader line's end and mid points to match the adjusted label position
   adjustedPoints?.forEach((point, index) => {
     if (labelLines[index]) {
       const originalEndPoint = labelLines[index].coords[2];
       const originalMidPoint = labelLines[index].coords[1];
 
-      // 更新终点
+      // Update the end point
       labelLines[index].coords[2] = [point.x, point.y, point.z];
 
-      // 如果y坐标发生了变化，调整中间点的y坐标以保持线条平滑
+      // If the y coordinate changed, adjust the mid point's y to keep the line smooth
       const yDiff = point.y - originalEndPoint[1];
       if (Math.abs(yDiff) > 0.001) {
-        // 调整中间点的y坐标，使其在起点和终点之间平滑过渡
-        const midY = originalMidPoint[1] + yDiff * 0.5; // 中间点跟随终点移动，但幅度较小
+        // Adjust the mid point's y so it transitions smoothly between start and end
+        const midY = originalMidPoint[1] + yDiff * 0.5; // The mid point follows the end point, but moves less
         labelLines[index].coords[1] = [
           originalMidPoint[0],
           midY,

package/src/components/Chart/Pie/index.tsx

@@ -19,21 +19,21 @@ export interface ChartPieProps extends ChartCommonProps {
   onChart?: (chart: echarts.EChartsType) => void;
   extendSeries?: Series[];
   onClick?: (event: echarts.ECElementEvent) => void;
-  /** 是否启用图例自动滚动，默认 false */
+  /** Whether to enable legend auto-scroll, default false */
   enableLegendAutoScroll?: boolean;
-  /** 图例每页可见数量，默认 8 */
+  /** Number of legend items visible per page, default 8 */
   legendVisibleCount?: number;
-  /** 图例滚动间隔时间(ms)，默认 1500 */
+  /** Legend scroll interval (ms), default 1500 */
   legendScrollInterval?: number;
-  /** 是否半圆，默认 false */
+  /** Whether it is a semicircle, default false */
   isSemiCircle?: boolean;
-  /** 半圆贴边位置，默认 'bottom' */
+  /** Edge the semicircle is attached to, default 'bottom' */
   position?: "top" | "bottom" | "left" | "right";
-  /** 显示角度，默认 180 */
+  /** Display angle, default 180 */
   spanAngle?: number;
-  /** 中心位置 */
+  /** Center position */
   center?: [string, string];
-  /** 半径配置 */
+  /** Radius config */
   radius?: [string, string];
 }
 
@@ -71,60 +71,60 @@ const ChartPie: ChartPieFC = (props) => {
     null
   );
 
-  // 根据 position 计算默认 radius（如果未指定）
+  // Compute the default radius based on position (when not specified)
   const calculatedRadius = useMemo(() => {
     if (radius) {
       return radius;
     }
 
-    // 对于半圆，需要更大的 radius 值才能占满容器
-    // 因为半圆只占 180 度，所以外半径需要更大才能覆盖整个容器的高度或宽度
+    // A semicircle needs a larger radius to fill the container,
+    // because it spans only 180 degrees, so the outer radius must be larger to cover the container's full height or width
     if (isSemiCircle) {
       return ["0%", "200%"];
     }
-    // 全圆
+    // Full circle
     return ["45%", "70%"];
   }, [radius, isSemiCircle]);
 
-  // 计算角度和中心位置
+  // Compute angles and center position
   const { calculatedCenter, startAngle, endAngle, actualSpanAngle } =
     useMemo(() => {
-      // 根据 position 计算默认 center（如果未指定）
+      // Compute the default center based on position (when not specified)
       let calculatedCenter: [string, string] = center || ["30%", "50%"];
       let startAngle = 90;
-      let endAngle = 450; // 360 + 90，从顶部开始
+      let endAngle = 450; // 360 + 90, starting from the top
       const actualSpanAngle = isSemiCircle ? spanAngle : 360;
 
       if (isSemiCircle) {
-        // 根据 position 计算角度和中心位置
+        // Compute angles and center position based on position
         switch (position) {
           case "top":
-            // 上半圆
+            // Top semicircle
             startAngle = 180;
             endAngle = 0;
             calculatedCenter = center || ["center", "0%"];
             break;
           case "bottom":
-            // 下半圆
+            // Bottom semicircle
             startAngle = 0;
             endAngle = 180;
             calculatedCenter = center || ["center", "100%"];
             break;
           case "left":
-            // 左半圆
+            // Left semicircle
             startAngle = 90;
             endAngle = 270;
             calculatedCenter = center || ["0%", "center"];
             break;
           case "right":
-            // 右半圆
+            // Right semicircle
             startAngle = 270;
             endAngle = 90;
             calculatedCenter = center || ["100%", "center"];
             break;
         }
       } else {
-        // 全圆
+        // Full circle
         calculatedCenter = center || ["30%", "50%"];
       }
 
@@ -136,7 +136,7 @@ const ChartPie: ChartPieFC = (props) => {
       };
     }, [isSemiCircle, position, center, spanAngle]);
 
-  // 处理数据：如果是半圆，需要填充空白数据
+  // Process the data: a semicircle needs blank data padding
   const processedSeriesData = useMemo(() => {
     if (!seriesData || !isSemiCircle) {
       return seriesData;
@@ -146,7 +146,7 @@ const ChartPie: ChartPieFC = (props) => {
     const repeatedMultiple = 360 / actualSpanAngle;
     const addDataLen = parseInt(String((repeatedMultiple - 1) * originDataLen));
 
-    // 填充空白数据以形成半圆
+    // Pad with blank data to form the semicircle
     const emptyData = Array.from({ length: addDataLen }, () => ({
       value: 0,
       itemStyle: {
@@ -160,9 +160,9 @@ const ChartPie: ChartPieFC = (props) => {
     return [...seriesData, ...emptyData] as SeriesDataType;
   }, [seriesData, isSemiCircle, actualSpanAngle]);
 
-  // 使用 useMemo 缓存 chart 配置
+  // Cache the chart option with useMemo
   const chartOption = useMemo(() => {
-    // 当启用自动滚动时，隐藏分页按钮并设置为滚动类型
+    // When auto-scroll is enabled, hide the paging buttons and use the scroll type
     const baseLegendConfig: echarts.LegendComponentOption = {
       orient: "vertical",
       top: "middle",
@@ -178,9 +178,9 @@ const ChartPie: ChartPieFC = (props) => {
     const legendConfig: echarts.LegendComponentOption = enableLegendAutoScroll
       ? {
           ...baseLegendConfig,
-          // 设置为滚动类型
+          // Use the scroll type
           type: "scroll",
-          // 隐藏分页按钮的配置
+          // Config to hide the paging buttons
           pageIconSize: 0,
           pageIconColor: "transparent",
           pageIconInactiveColor: "transparent",
@@ -239,44 +239,44 @@ const ChartPie: ChartPieFC = (props) => {
     endAngle,
   ]);
 
-  // 处理图表 resize 的回调
+  // Callback for handling chart resize
   const handleResize = useCallback(() => {
     chartInstanceRef.current?.resize();
   }, []);
 
-  // 初始化图表
+  // Initialize the chart
   useEffect(() => {
     if (!chartRef.current) return;
 
-    // 初始化或获取已存在的实例
+    // Initialize or reuse the existing instance
     let chart = chartInstanceRef.current;
     if (!chart) {
       chart = echarts.init(chartRef.current);
       chartInstanceRef.current = chart;
-      // 首次初始化时调用 onChart 回调
+      // Call the onChart callback on first initialization
       onChart?.(chart);
     }
 
-    // 设置配置
+    // Apply the option
     chart.setOption(chartOption as ChartOptionType, true);
 
-    // 添加 resize 监听
+    // Add resize listener
     window.addEventListener("resize", handleResize);
 
-    // 添加 ResizeObserver
+    // Add ResizeObserver
     if (chartRef.current && !resizeObserverRef.current) {
       resizeObserverRef.current = new ResizeObserver(handleResize);
       resizeObserverRef.current.observe(chartRef.current);
     }
 
-    // 添加点击事件
+    // Add click event
     if (onClick) {
       chartInstanceRef.current?.on("click", onClick);
     }
 
-    // 图例自动滚动
+    // Legend auto-scroll
     if (enableLegendAutoScroll && seriesData && seriesData.length > 0) {
-      // 清理之前的滚动实例
+      // Dispose the previous scroll instance
       if (legendScrollRef.current) {
         legendScrollRef.current.dispose();
       }
@@ -290,7 +290,7 @@ const ChartPie: ChartPieFC = (props) => {
       });
     }
 
-    // 清理函数
+    // Cleanup function
     return () => {
       window.removeEventListener("resize", handleResize);
 
@@ -298,7 +298,7 @@ const ChartPie: ChartPieFC = (props) => {
         chartInstanceRef.current?.off("click", onClick);
       }
 
-      // 清理图例滚动
+      // Clean up legend scrolling
       if (legendScrollRef.current) {
         legendScrollRef.current.dispose();
         legendScrollRef.current = null;
@@ -315,15 +315,15 @@ const ChartPie: ChartPieFC = (props) => {
     legendScrollInterval,
   ]);
 
-  // 组件卸载时清理资源
+  // Clean up resources when the component unmounts
   useEffect(() => {
     return () => {
-      // 清理 ResizeObserver
+      // Clean up ResizeObserver
       if (resizeObserverRef.current) {
         resizeObserverRef.current.disconnect();
         resizeObserverRef.current = null;
       }
-      // 销毁图表实例
+      // Dispose the chart instance
       if (chartInstanceRef.current) {
         chartInstanceRef.current.dispose();
         chartInstanceRef.current = null;

package/src/components/Chart/Polar/index.tsx

@@ -38,7 +38,7 @@ const Polar: React.FC<ChartPolarProps> = (props) => {
   const chartInstanceRef = useRef<echarts.ECharts | null>(null);
   const resizeObserverRef = useRef<ResizeObserver | null>(null);
 
-  // 使用 useMemo 缓存 chart 配置
+  // Cache the chart option with useMemo
   const chartOption = useMemo(() => {
     const option: ChartsOption = {
       title: [
@@ -168,49 +168,49 @@ const Polar: React.FC<ChartPolarProps> = (props) => {
     coreOption,
   ]);
 
-  // 处理图表 resize 的回调
+  // Callback handling chart resize
   const handleResize = useCallback(() => {
     chartInstanceRef.current?.resize();
   }, []);
 
-  // 初始化图表
+  // Initialize the chart
   useEffect(() => {
     if (!chartRef.current) return;
 
-    // 初始化或获取已存在的实例
+    // Initialize a new instance or reuse the existing one
     let chart = chartInstanceRef.current;
     if (!chart) {
       chart = echarts.init(chartRef.current);
       chartInstanceRef.current = chart;
     }
 
-    // 设置配置
+    // Apply the option
     chart.setOption(chartOption as ChartOptionType, true);
 
-    // 添加 resize 监听
+    // Add resize listener
     window.addEventListener("resize", handleResize);
 
-    // 添加 ResizeObserver
+    // Add ResizeObserver
     if (chartRef.current && !resizeObserverRef.current) {
       resizeObserverRef.current = new ResizeObserver(handleResize);
       resizeObserverRef.current.observe(chartRef.current);
     }
 
-    // 清理函数
+    // Cleanup function
     return () => {
       window.removeEventListener("resize", handleResize);
     };
   }, [chartOption, handleResize]);
 
-  // 组件卸载时清理资源
+  // Clean up resources on unmount
   useEffect(() => {
     return () => {
-      // 清理 ResizeObserver
+      // Clean up the ResizeObserver
       if (resizeObserverRef.current) {
         resizeObserverRef.current.disconnect();
         resizeObserverRef.current = null;
       }
-      // 销毁图表实例
+      // Dispose the chart instance
       if (chartInstanceRef.current) {
         chartInstanceRef.current.dispose();
         chartInstanceRef.current = null;

package/src/components/Chart/Radar/index.tsx

@@ -8,9 +8,9 @@ export interface RadarIndicator {
   max?: number;
 }
 
-/** 单指标 tooltip 触发方式
- * - `point`  仅悬停在数据点/线上触发（echarts 原生 item trigger）
- * - `region` 进入该指标的扇形区域即触发，并在命中扇形区内填充高亮色
+/** Single-indicator tooltip trigger mode
+ * - `point`  triggers only when hovering data points/lines (native echarts item trigger)
+ * - `region` triggers as soon as the pointer enters the indicator's sector, filling the hit sector with a highlight color
  */
 export type SingleIndicatorMode = "point" | "region";
 
@@ -20,9 +20,9 @@ export interface ChartRadarProps extends ChartCommonProps {
   color?: string;
   name?: string;
   /**
-   * 单指标 tooltip：
-   * - `true` 使用内置简单格式（`系列名 · 指标名：值`）
-   * - 传函数则接收当前最近指标下标与原始 echarts params，自行返回 HTML
+   * Single-indicator tooltip:
+   * - `true` uses the built-in simple format (`seriesName · indicatorName: value`)
+   * - a function receives the nearest indicator index and the raw echarts params, and returns HTML itself
    */
   singleIndicatorTooltip?:
     | boolean
@@ -31,9 +31,9 @@ export interface ChartRadarProps extends ChartCommonProps {
         params: unknown,
         indicator: RadarIndicator,
       ) => string);
-  /** 单指标触发方式；**不设置则完全走 echarts 原生全指标 tooltip**，忽略 `singleIndicatorTooltip` */
+  /** Single-indicator trigger mode; **when unset, the native echarts all-indicator tooltip is used** and `singleIndicatorTooltip` is ignored */
   singleIndicatorMode?: SingleIndicatorMode;
-  /** `region` 模式下的高亮色；不传则使用 `color` 以 0.12 透明度渲染 */
+  /** Highlight color in `region` mode; defaults to `color` rendered at 0.12 opacity */
   singleIndicatorHoverFill?: string;
 }
 
@@ -75,7 +75,7 @@ const Radar: React.FC<ChartRadarProps> = (props) => {
     const overrideData = seriesOverride?.data;
     const extraData = Array.isArray(overrideData) ? overrideData : [];
 
-    // 将每个 extraData item 拆为独立 series，使图例可以分别控制显隐
+    // Split each extraData item into its own series so the legend can toggle them individually
     const extraSeries: echarts.RadarSeriesOption[] = extraData.map((item) => {
       const d = item as { name?: string; [key: string]: unknown };
       return {
@@ -264,7 +264,7 @@ const Radar: React.FC<ChartRadarProps> = (props) => {
           return;
         }
         const axes = coord.getIndicatorAxes();
-        // echarts 雷达轴角度按数学约定（y 向上），而屏幕坐标 y 向下，需翻转 y
+        // echarts radar axis angles follow the math convention (y up) while screen coordinates have y down, so flip y
         const mouseAngle = Math.atan2(-dy, dx);
         let bestI = -1;
         let bestDA = Infinity;
@@ -278,8 +278,8 @@ const Radar: React.FC<ChartRadarProps> = (props) => {
         });
         hoveredIndicatorRef.current = bestI;
         if (hoverShape && bestI >= 0) {
-          // 以与雷达多边形一致的边界构造扇形区：
-          // 中心 → 与上一轴顶边的中点 → 当前轴顶 → 与下一轴顶边的中点
+          // Build the sector with boundaries matching the radar polygon:
+          // center → midpoint of the edge to the previous axis tip → current axis tip → midpoint of the edge to the next axis tip
           const n = axes.length;
           const tipOf = (idx: number) => {
             const a = axes[idx].angle;

package/src/components/Chart/Sankey/index.tsx

@@ -18,7 +18,7 @@ const Sankey: React.FC<ChartSankeyProps> = (props) => {
   const chartInstanceRef = useRef<echarts.ECharts | null>(null);
   const resizeObserverRef = useRef<ResizeObserver | null>(null);
 
-  // 使用 useMemo 缓存 chart 配置
+  // Cache the chart option with useMemo
   const chartOption = useMemo(() => {
     const option: ChartsOption = {
       series: {
@@ -98,22 +98,22 @@ const Sankey: React.FC<ChartSankeyProps> = (props) => {
     return option;
   }, [seriesData, seriesLinks, series]);
 
-  // 处理图表 resize 的回调
+  // Callback handling chart resize
   const handleResize = useCallback(() => {
     chartInstanceRef.current?.resize();
   }, []);
 
-  // 初始化图表
+  // Initialize the chart
   useEffect(() => {
     if (!chartRef.current) return;
 
-    // 初始化或获取已存在的实例
+    // Initialize a new instance or reuse the existing one
     let chart = chartInstanceRef.current;
     if (!chart) {
       chart = echarts.init(chartRef.current);
       chartInstanceRef.current = chart;
 
-      // 首次初始化时添加 finished 事件监听
+      // Attach the finished event listener on first initialization
       chart.on("finished", () => {
         getImage?.(
           chart!.getDataURL({
@@ -125,33 +125,33 @@ const Sankey: React.FC<ChartSankeyProps> = (props) => {
       });
     }
 
-    // 设置配置
+    // Apply the option
     chart.setOption(chartOption as ChartOptionType, true);
 
-    // 添加 resize 监听
+    // Add resize listener
     window.addEventListener("resize", handleResize);
 
-    // 添加 ResizeObserver
+    // Add ResizeObserver
     if (chartRef.current && !resizeObserverRef.current) {
       resizeObserverRef.current = new ResizeObserver(handleResize);
       resizeObserverRef.current.observe(chartRef.current);
     }
 
-    // 清理函数
+    // Cleanup function
     return () => {
       window.removeEventListener("resize", handleResize);
     };
   }, [chartOption, handleResize, getImage]);
 
-  // 组件卸载时清理资源
+  // Clean up resources on unmount
   useEffect(() => {
     return () => {
-      // 清理 ResizeObserver
+      // Clean up the ResizeObserver
       if (resizeObserverRef.current) {
         resizeObserverRef.current.disconnect();
         resizeObserverRef.current = null;
       }
-      // 销毁图表实例
+      // Dispose the chart instance
       if (chartInstanceRef.current) {
         chartInstanceRef.current.off("finished");
         chartInstanceRef.current.dispose();