@herbertgao/pi-extensions 2026.10.1 → 2026.10.3

package/node_modules/pi-lens/dist/clients/project-scale.js

@@ -1,237 +0,0 @@
-/**
- * Single "project scale" knob deriving pi-lens's five independent
- * project-size budgets (#776).
- *
- * Before this module, five subsystems each hardcoded their own file/entry
- * ceiling and degraded independently as a repo grew:
- *
- *   - project-diagnostics scanner: 500 files  (clients/project-diagnostics/scanner.ts)
- *   - review graph:               1,000 files (clients/runtime-config.ts)
- *   - startup scan:               2,000 source files (clients/startup-scan.ts)
- *   - jscpd:                      6,000 dir entries (clients/jscpd-client.ts)
- *   - word index:                 6,000 files (clients/word-index.ts)
- *
- * A large-but-healthy (monorepo-scale) repo would trip these one at a time,
- * silently, with no single lever to say "this repo is big; believe in it".
- *
- * This module centralizes the base value (`maxProjectFiles`, default 2,000 —
- * chosen so every ratio below reproduces today's five defaults exactly) and
- * exposes one `deriveBudget(ratio, cwd)` helper subsystems call instead of
- * declaring their own local constant. Raising `maxProjectFiles` in one place
- * scales all five budgets coherently; this refactor changes no default value.
- *
- * Ratio table (documents today's five defaults at the default base of 2,000):
- *
- *   | Subsystem                    | Ratio | Derived @ base 2,000 | Today  |
- *   |-------------------------------|-------|----------------------|--------|
- *   | project-diagnostics scanner   | 0.25× | 500                  | 500    |
- *   | review graph (#775 R1: tapered above 4,000, see below) | 0.5× | 1,000 | 1,000 |
- *   | startup scan (source files)   | 1×    | 2,000                | 2,000  |
- *   | jscpd (dir entries)           | 3×    | 6,000                | 6,000  |
- *   | word index (files)            | 3×    | 6,000                | 6,000  |
- *
- * The review graph is the ONE budget in this table that stops being a flat
- * ratio above a threshold: {@link getReviewGraphMaxFilesDerived} tapers its
- * growth toward a hard ceiling instead of scaling linearly forever (or
- * cliff-dropping like the pre-#775 flat cap did) — see that function's doc
- * comment for the full rationale. Every OTHER row in this table (and the
- * review graph itself at or below the taper's linear boundary) is still the
- * flat ratio shown.
- *
- * `maxProjectFiles` resolution order (highest priority first) — NOTE this is
- * the base-value chain only; each subsystem's own PRE-EXISTING per-subsystem
- * env override (e.g. `PI_LENS_REVIEW_GRAPH_MAX_FILES`,
- * `PI_LENS_STARTUP_SCAN_MAX_ENTRIES`) is still checked at the call site
- * BEFORE falling back to this module's derived value, so it always wins:
- *
- *   1. `maxProjectFiles` in the project's `.pi-lens.json` (per-project — see
- *      `clients/project-lens-config.ts`). Requires a `cwd`; a call site with
- *      no cwd in hand skips straight to (2).
- *   2. `PI_LENS_MAX_PROJECT_FILES` environment variable.
- *   3. Default: {@link DEFAULT_PROJECT_SCALE_BASE} (2,000).
- *
- * Two entry-UNIT budgets were deliberately left OUT of this derivation:
- * `startup-scan.ts`'s `MAX_STARTUP_SCAN_ENTRIES` (50,000 directory entries)
- * and `source-filter.ts`'s `DEFAULT_MAX_SCAN_ENTRIES` (200,000 directory
- * entries). Both bound directory entries VISITED (a raw tree-walk safety
- * valve, #758/#760), not source files KEPT — a very different quantity whose
- * healthy ratio to file count varies wildly by project shape (a repo with a
- * huge non-source data/asset tree needs a much larger entries budget than its
- * source-file count would suggest). Coupling them to `maxProjectFiles` would
- * risk silently changing behavior on exactly the pathological-tree shapes
- * these ceilings exist to protect, for no behavior-neutral gain; they already
- * have their own env overrides for callers who need to retune them. Left
- * standalone per the issue's "derive or standalone, justify" instruction.
- */
-import { lazyEnvNumber, toPositiveFinite } from "./env-utils.js";
-import { loadPiLensProjectConfig } from "./project-lens-config.js";
-/**
- * Default base value: chosen so every ratio in the table above reproduces
- * today's five hardcoded defaults exactly. Do not change without re-deriving
- * every subsystem's default (that re-tuning is explicitly out of scope here —
- * see #775).
- */
-export const DEFAULT_PROJECT_SCALE_BASE = 2_000;
-const _envBase = lazyEnvNumber("PI_LENS_MAX_PROJECT_FILES", DEFAULT_PROJECT_SCALE_BASE);
-/** Test-only: clears the memoized `PI_LENS_MAX_PROJECT_FILES` read so a
- * subsequent call re-reads the env var (matching the `_resetForTests`
- * convention used across `env-utils.ts` consumers). */
-export function _resetProjectScaleBaseForTests() {
-    _envBase._resetForTests();
-}
-/**
- * Resolve the base `maxProjectFiles` value.
- *
- * Pass the caller's project root as `cwd` whenever one is available — that's
- * what lets a per-project `.pi-lens.json` override win. Call sites that only
- * have a bare module-level constant today (no cwd in hand) may omit it; they
- * fall back to the `PI_LENS_MAX_PROJECT_FILES` env var / default chain only
- * (documented per-call-site in each subsystem's own comment).
- */
-export function getProjectScaleBase(cwd) {
-    if (cwd) {
-        const config = loadPiLensProjectConfig(cwd);
-        const configBase = toPositiveFinite(config.maxProjectFiles);
-        if (configBase > 0)
-            return Math.floor(configBase);
-    }
-    return _envBase.get();
-}
-/**
- * Ratios calibrated to reproduce today's five hardcoded defaults exactly at
- * {@link DEFAULT_PROJECT_SCALE_BASE}. The unit each budget is expressed in
- * stays subsystem-appropriate (files vs. directory entries); this table is
- * the single place that encodes the relationship between them.
- */
-export const PROJECT_SCALE_RATIOS = {
-    /** project-diagnostics scanner: files kept. 0.25 * 2,000 = 500. */
-    projectDiagnosticsScanner: 0.25,
-    /** review graph: files kept. 0.5 * 2,000 = 1,000. */
-    reviewGraph: 0.5,
-    /** startup scan: source files counted. 1 * 2,000 = 2,000. */
-    startupScan: 1,
-    /** jscpd: directory entries visited (its own gate, not source-filter's). 3 * 2,000 = 6,000. */
-    jscpd: 3,
-    /** word index: files indexed. 3 * 2,000 = 6,000. */
-    wordIndex: 3,
-};
-/**
- * Scale a ratio from {@link PROJECT_SCALE_RATIOS} by the resolved base,
- * rounding to the nearest integer and flooring at 1 (a budget of 0 would
- * degrade every scan to "nothing scanned", never the intent of a large-repo
- * knob).
- */
-export function deriveBudget(ratio, cwd) {
-    return Math.max(1, Math.round(getProjectScaleBase(cwd) * ratio));
-}
-/** Derived project-diagnostics scanner budget (files). See {@link deriveBudget}. */
-export function getProjectDiagnosticsScannerMaxFiles(cwd) {
-    return deriveBudget(PROJECT_SCALE_RATIOS.projectDiagnosticsScanner, cwd);
-}
-/**
- * Review-graph budget: adaptive taper (#775 R1).
- *
- * At or below {@link REVIEW_GRAPH_LINEAR_CEILING_BASE} this is IDENTICAL to
- * the flat `PROJECT_SCALE_RATIOS.reviewGraph` (0.5x) ratio every other
- * caller of {@link deriveBudget} still uses — every existing small/medium
- * project derivation (including the default-base 1,000-file case) is
- * bit-for-bit unchanged by this function.
- *
- * Above that base, growth SLOWS instead of continuing linearly (a monorepo
- * with a huge `maxProjectFiles` would otherwise get an equally huge,
- * untested review-graph budget) or cutting off at a cliff (today's actual
- * bug: a flat cap truncates the graph to empty above it, per #775's top
- * risk). A hyperbolic taper closes the gap to
- * {@link REVIEW_GRAPH_HARD_CEILING} asymptotically, never reaching or
- * exceeding it: at `base = REVIEW_GRAPH_LINEAR_CEILING_BASE +
- * REVIEW_GRAPH_TAPER_SCALE`, exactly HALF the remaining gap to the ceiling
- * is closed (a standard property of this taper shape) — e.g. base 12,000
- * (6x default) derives ~3,500 files; base 20,000 (10x default) derives
- * ~4,000.
- *
- * {@link REVIEW_GRAPH_HARD_CEILING} (5,000) is grounded FIRST by the
- * strongest real constraint on this number — `review-graph/builder.ts`'s
- * persist circuit-breaker (`GRAPH_PERSIST_MAX_ELEMENTS_DEFAULT`, 500,000
- * graph elements: file/symbol nodes + cross-file edges). Above that element
- * count only a centrality-ranked, honestly-marked partial graph is persisted
- * (#936). Read-only orientation can use it, but the build tier rejects it as
- * a complete incremental base. For symbol-dense repos, element
- * count runs on the order of ~30/file (file node + per-symbol nodes +
- * import/call/reference edges), so a hard ceiling must leave real headroom
- * below 500,000 elements. The file ceiling remains conservative because it
- * also bounds cold-build latency; the persist cap has independent measured
- * headroom through a roughly 420,000-element / 10,000-file graph (#936).
- * 5,000 is also still
- * coherent with the jscpd/wordIndex 3x-ratio precedent (6,000 at the
- * default base) as "the ceiling sits just below that established top
- * tier" rather than an exact match, so it isn't a fresh unrelated
- * constant either.
- *
- * SECOND, independently, the number is consistent with the review graph's
- * own measured per-file BUILD cost: CHANGELOG 3.8.43 ("Persist review graph
- * to disk") documents a full cold tree-sitter + import-fact build taking
- * "2-4 s" at the then-1,000-file cap — roughly 2-4 ms/file. 5,000 files at
- * that rate is a ~10-20 s worst-case cold build — tolerable as a rare
- * one-time cost when the persist cap above is respected (the disk-cached
- * path costs "~20 ms JSON parse + rebuildIndexes" instead, and per-edit
- * builds are incremental — see `diffSignatureMaps`). This build-time
- * argument alone would tolerate a larger ceiling; the persist-cap margin
- * above is the binding constraint.
- */
-export const REVIEW_GRAPH_LINEAR_CEILING_BASE = 4_000;
-/**
- * At `base = REVIEW_GRAPH_LINEAR_CEILING_BASE + REVIEW_GRAPH_TAPER_SCALE`
- * the taper has closed exactly half the remaining gap to
- * {@link REVIEW_GRAPH_HARD_CEILING} — see {@link taperedReviewGraphMaxFiles}.
- */
-export const REVIEW_GRAPH_TAPER_SCALE = 8_000;
-/** See the rationale in {@link taperedReviewGraphMaxFiles}'s doc comment. */
-export const REVIEW_GRAPH_HARD_CEILING = 5_000;
-/**
- * Pure taper function — see {@link getReviewGraphMaxFilesDerived}'s doc
- * comment for the full rationale. Exported standalone so tests can probe
- * the shape (below/at/above the linear boundary, ceiling asymptote)
- * independent of `getProjectScaleBase`'s env/config resolution.
- */
-export function taperedReviewGraphMaxFiles(base) {
-    const linearValue = base * PROJECT_SCALE_RATIOS.reviewGraph;
-    if (base <= REVIEW_GRAPH_LINEAR_CEILING_BASE) {
-        return Math.max(1, Math.round(linearValue));
-    }
-    const boundaryValue = REVIEW_GRAPH_LINEAR_CEILING_BASE * PROJECT_SCALE_RATIOS.reviewGraph;
-    const excess = base - REVIEW_GRAPH_LINEAR_CEILING_BASE;
-    const taperedExtra = (REVIEW_GRAPH_HARD_CEILING - boundaryValue) *
-        (excess / (excess + REVIEW_GRAPH_TAPER_SCALE));
-    return Math.max(1, Math.round(boundaryValue + taperedExtra));
-}
-/**
- * Derived review-graph budget (files), honoring — in priority order — the
- * project's `.pi-lens.json#reviewGraph.maxFiles` knob (#775 R2, an explicit
- * opt-in for repos that want a bigger graph than the taper would derive;
- * see `project-lens-config.ts`), then {@link taperedReviewGraphMaxFiles} of
- * the resolved `maxProjectFiles` base. Callers still check their own
- * PRE-EXISTING `PI_LENS_REVIEW_GRAPH_MAX_FILES` env override BEFORE calling
- * this (see `review-graph/builder.ts#getReviewGraphMaxFiles`) — that always
- * wins outright, unchanged by this function.
- */
-export function getReviewGraphMaxFilesDerived(cwd) {
-    if (cwd) {
-        const config = loadPiLensProjectConfig(cwd);
-        const configOverride = config.reviewGraph?.maxFiles;
-        if (configOverride !== undefined)
-            return configOverride;
-    }
-    return taperedReviewGraphMaxFiles(getProjectScaleBase(cwd));
-}
-/** Derived startup-scan budget (source files). See {@link deriveBudget}. */
-export function getStartupScanMaxSourceFilesDerived(cwd) {
-    return deriveBudget(PROJECT_SCALE_RATIOS.startupScan, cwd);
-}
-/** Derived jscpd budget (directory entries). See {@link deriveBudget}. */
-export function getJscpdMaxEntriesDerived(cwd) {
-    return deriveBudget(PROJECT_SCALE_RATIOS.jscpd, cwd);
-}
-/** Derived word-index budget (files). See {@link deriveBudget}. */
-export function getWordIndexMaxFilesDerived(cwd) {
-    return deriveBudget(PROJECT_SCALE_RATIOS.wordIndex, cwd);
-}

package/node_modules/pi-lens/dist/clients/project-scan-policy.js

@@ -1,11 +0,0 @@
-import { collectSourceFilesWithBudgetAsync, } from "./source-filter.js";
-/**
- * Budget-aware source walk (#760): the same walk as
- * `collectProjectSourceFiles`, but returns `{ files, entryBudgetExceeded }` so a caller on a hot
- * path (e.g. the per-edit cascade graph rebuild) can observe that the walk
- * stopped at its `maxScanEntries` entry budget and got a truncated
- * best-effort list rather than a complete enumeration.
- */
-export function collectProjectSourceFilesWithBudgetAsync(rootDir, options) {
-    return collectSourceFilesWithBudgetAsync(rootDir, options);
-}

package/node_modules/pi-lens/dist/clients/project-snapshot-fingerprint.js

@@ -1,48 +0,0 @@
-import { createHash } from "node:crypto";
-/**
- * Hash serialized project-snapshot JSON while replacing only the top-level
- * volatile `generatedAt` value with a stable sentinel. Production calls this
- * on the persistence worker after stringify. The main-thread caller uses it
- * only on the explicit synchronous fallback path, where serialization already
- * happened and no second object walk is added.
- */
-export function fingerprintProjectSnapshotJson(json, generatedAt) {
-    const marker = `"generatedAt":${JSON.stringify(generatedAt)}`;
-    let markerIndex = -1;
-    let depth = 0;
-    let inString = false;
-    let escaped = false;
-    for (let index = 0; index < json.length; index++) {
-        const char = json[index];
-        if (inString) {
-            if (escaped)
-                escaped = false;
-            else if (char === "\\")
-                escaped = true;
-            else if (char === '"')
-                inString = false;
-            continue;
-        }
-        if (char === '"') {
-            if (depth === 1 && json.startsWith(marker, index)) {
-                markerIndex = index;
-                break;
-            }
-            inString = true;
-        }
-        else if (char === "{")
-            depth++;
-        else if (char === "}")
-            depth--;
-    }
-    const hash = createHash("sha256");
-    if (markerIndex < 0) {
-        hash.update(json);
-    }
-    else {
-        hash.update(json.slice(0, markerIndex));
-        hash.update('"generatedAt":""');
-        hash.update(json.slice(markerIndex + marker.length));
-    }
-    return hash.digest("hex");
-}

package/node_modules/pi-lens/dist/clients/project-snapshot-persist-worker.js

@@ -1,20 +0,0 @@
-import { serveGzipStageWorker, } from "./gzip-stage-write.js";
-import { fingerprintProjectSnapshotJson } from "./project-snapshot-fingerprint.js";
-/**
- * Hash the serialized body while replacing only the top-level volatile
- * `generatedAt` value with a stable sentinel. This runs after the worker has
- * already paid the unavoidable stringify cost. It never walks the snapshot on
- * the extension host's event loop.
- */
-function semanticSnapshotFingerprint(request, json) {
-    const generatedAt = request.data.generatedAt;
-    return fingerprintProjectSnapshotJson(json, typeof generatedAt === "string" ? generatedAt : "");
-}
-serveGzipStageWorker((request) => ({
-    id: request.id,
-    generation: request.generation,
-    stagePath: request.stagePath,
-}), {
-    semanticFingerprint: semanticSnapshotFingerprint,
-    skipIfFingerprints: (request) => request.priorFingerprints,
-});