@herbertgao/pi-extensions 2026.10.0 → 2026.10.2

package/node_modules/pi-lens/dist/clients/project-diagnostics/fresh-fetch.js

@@ -1,668 +0,0 @@
-/**
- * THE heavyweight-analyzer reader for `lens_diagnostics mode=full` (#585).
- *
- * It superseded a cache-ONLY reader (`extractCachedProjectDiagnostics`, since
- * removed from ./extractors.ts as a #585-class dead parallel path — see that
- * file's header). That reader was deliberately cache-only because historically
- * mode=full had no safe way to trigger a scan itself: relaunching knip/jscpd/
- * gitleaks/govulncheck/opengrep/trivy/dead-code concurrently with the
- * session_start background pass over the SAME project root could double-spawn a
- * CPU-bound analyzer (the exact TUI-freeze/zombie-process pathology
- * `KnipClient.inFlight`'s docstring describes).
- *
- * That pathology is now closed for every one of these analyzers:
- * `KnipClient`, `JscpdClient`, and the `DeadCodeClient`s each carry their own
- * `inFlight` de-dupe map, and `GitleaksClient`/`GovulncheckClient`/
- * `TrivyClient`/`OpengrepClient` share `SecurityScanClient.dedupeScan` (landed
- * in #313, well before this issue — verified before writing this module). So
- * a mode=full opengrep run that races the session_start whole-tree scan of the
- * same root JOINS it rather than spawning a second (heavy) scan. So mode=full can
- * now safely trigger — or, via the de-dupe guard, *join* — a fresh run of
- * each analyzer instead of settling for a session_start-only snapshot that
- * can be hours stale in a long session.
- *
- * Mirrors the gating each analyzer already applies at session_start
- * (`clients/runtime-session.ts`) — same "not applicable to this project" /
- * "not installed" skip conditions — but never skips on a cache hit; it always
- * performs (or joins) an actual run. One deliberate exception: gitleaks (#608)
- * uses a looser "smart-default" gate here (any tracked git repo) than
- * session_start's strict opt-in-config gate, since mode=full is an
- * explicitly-requested comprehensive review and gitleaks is cheap/advisory —
- * see its own task below. Every fresh result is written back to
- * cache via the same `cacheManager.writeCache` session_start/turn_end use, so
- * a background pass racing in afterward reads a result at least as fresh as
- * its own.
- *
- * No extra write-ordering guard (`clients/write-ordering-guard.ts`) is
- * layered on top of this: an overlapping call to the same analyzer for the
- * same root always resolves to the exact same in-flight promise (the de-dupe
- * guard above), so concurrent writers here are always writing IDENTICAL
- * data — there is no "stale write lands after a fresher one" race to guard
- * against. A guard would only earn its keep if two *different* result
- * objects for the same key could race; that can't happen while every caller
- * for a given root shares one in-flight run.
- *
- * Does NOT change session_start's or turn_end's own scheduling (both remain
- * skip-if-cached) — this module is additive and mode=full-only.
- *
- * Abort handling: `formatFullMode` (`tools/lens-diagnostics.ts`) already
- * threads a combined signal (Escape/turn-abort OR'd with a hard wall-clock
- * ceiling, `FULL_SCAN_WALL_CLOCK_MS`) into the LSP sweep and the cheap
- * project-runner scan — this module accepts the SAME signal so a `mode=full`
- * abort also bounds the fresh-fetch instead of letting it run uncancelled for
- * up to trivy's own ~180s ceiling after the rest of the scan already stopped.
- * None of the six analyzer clients accept a cancellation token today (checked
- * each `analyze()`/`scan()` signature before assuming otherwise — none does),
- * so true in-flight cancellation isn't available at the client level. Instead
- * this races the overall `Promise.all(tasks)` against the abort signal and
- * returns whatever has already settled — the same "partial is OK, a hang is
- * not" shape `clients/deadline-utils.ts`'s `withDeadline(..., onTimeout:
- * "undefined")` and `clients/lsp/index.ts`'s `runWorkspaceDiagnostics` already
- * use. Already-spawned analyzer processes are NOT killed: they keep running in
- * the background (bounded by their own `SCAN_TIMEOUT_MS`/`ANALYSIS_TIMEOUT_MS`)
- * and still write their result to cache when they finish, so nothing already
- * in flight is wasted — the NEXT caller (or a background session_start/
- * turn_end pass) benefits from it. Analyzers that hadn't settled yet when the
- * abort fired are reported in both `cold` (so they don't silently read as
- * "ran clean") and `abortedIds` (so a caller can render a more honest reason
- * than "not applicable").
- *
- * One analyzer does NOT follow the trigger-or-join shape above: `test-runner`
- * (#1004). Its "scan" is the per-edit turn_end test fire (`runtime-turn.ts`),
- * which only ever runs the targeted/cascade-aware test files touched by a
- * turn's edits — there is no whole-project run to trigger here, and forcing
- * one on every mode=full call would be exactly the double-spawn-a-heavy-
- * analyzer cost the de-dupe guards above exist to avoid. Its task is a plain
- * cache-read of the `"test-runner-findings"` key turn_end already wrote,
- * mirroring the pre-#585 `extractCachedProjectDiagnostics` registry's
- * "test-runner" row (cache-only, never triggers a run) rather than the
- * fresh-run pattern every other task here uses — see that task's own comment.
- *
- * Refs: #585, #313 (the SecurityScanClient de-dupe prerequisite), #1004
- */
-import * as fs from "node:fs";
-import * as os from "node:os";
-import * as path from "node:path";
-import { applyDispositionsMultiFile } from "../diagnostic-dispositions.js";
-import { getKnipIgnorePatterns } from "../file-utils.js";
-import { isAtOrAboveHomeDir, realpathOrResolve } from "../path-utils.js";
-import { isSameOrWithin } from "../lsp/server.js";
-import { incrementDegradationCount, recordDegradationOnce, } from "../degradation-ledger.js";
-import { GitleaksClient } from "../gitleaks-client.js";
-import { GovulncheckClient } from "../govulncheck-client.js";
-import { isToolInstallAllowedByTrust, projectTrustDenialReason, } from "../project-trust.js";
-import { TrivyClient } from "../trivy-client.js";
-import { reasonFromAvailabilityVerdict } from "./extractors.js";
-import { deadCodeResultToProjectDiagnostics } from "./runner-adapters/dead-code.js";
-import { gitleaksResultToProjectDiagnostics } from "./runner-adapters/gitleaks.js";
-import { govulncheckResultToProjectDiagnostics } from "./runner-adapters/govulncheck.js";
-import { jscpdResultToProjectDiagnostics } from "./runner-adapters/jscpd.js";
-import { knipIssuesToProjectDiagnostics } from "./runner-adapters/knip.js";
-import { circularDepsToProjectDiagnostics } from "./runner-adapters/madge.js";
-import { opengrepResultToProjectDiagnostics } from "./runner-adapters/opengrep.js";
-import { testRunnerFindingsToProjectDiagnostics } from "./runner-adapters/runner-findings.js";
-import { trivyResultToProjectDiagnostics } from "./runner-adapters/trivy.js";
-/** The heavyweight analyzers surfaced in `lens_diagnostics mode=full` — this is
- *  now the single source of truth for that list (#585 removed the parallel
- *  cache-only `EXTRACTORS` registry that used to shadow it). `warmTriggerFor`
- *  (extractors.ts) is keyed by these same ids for the "cold" honesty note.
- *  Exported so `tests/clients/project-diagnostics/analyzer-coverage.test.ts`
- *  (#1004's guardrail) can assert every session-start/turn-end analyzer cache
- *  writer id is a member — the exact #585-class check that would have caught
- *  opengrep's (and then test-runner's, #1004) omission before it shipped. */
-export const ANALYZER_IDS = [
-    "knip",
-    "jscpd",
-    "madge",
-    "gitleaks",
-    "govulncheck",
-    "opengrep",
-    "trivy",
-    "dead-code",
-    "test-runner",
-];
-function pushUnique(list, id) {
-    if (!list.includes(id))
-        list.push(id);
-}
-/**
- * Trigger (or join, via each client's in-flight de-dupe guard) a fresh run of
- * every heavyweight project analyzer and adapt the results to
- * `ProjectDiagnostic[]`. Runs all analyzers in parallel — total wall time is bounded by the
- * single slowest one (trivy's own timeout ceiling) rather than their sum.
- *
- * `signal`, when provided and it fires before every analyzer has settled,
- * makes this return immediately with whatever partial results are available
- * (see the module header for why this races rather than cancels in-flight
- * spawns).
- */
-export async function fetchFreshProjectDiagnostics(cacheManager, cwd, clients, signal, options = {}) {
-    const requestedRoot = options.analysisRoot === undefined
-        ? cwd
-        : path.resolve(cwd, options.analysisRoot);
-    let analysisRoot;
-    let analysisRootValidation;
-    if (options.analysisRoot !== undefined) {
-        try {
-            if (!fs.statSync(requestedRoot).isDirectory()) {
-                throw new Error("is not a directory");
-            }
-            analysisRoot = fs.realpathSync(requestedRoot);
-        }
-        catch (error) {
-            const detail = error instanceof Error ? error.message : String(error);
-            const reason = `the explicit analysis root ${requestedRoot} is unavailable or ${detail}`;
-            analysisRootValidation = {
-                state: "undecided",
-                root: requestedRoot,
-                reason,
-            };
-            incrementDegradationCount({
-                kind: "lens-diagnostics-analysis-root-rejected",
-                subject: requestedRoot,
-                reason,
-            });
-            return {
-                analysisRootValidation,
-                diagnostics: [],
-                runners: [],
-                analyzed: [],
-                authoritativeCoverage: [],
-                cold: [...ANALYZER_IDS],
-                coldReasons: Object.fromEntries(ANALYZER_IDS.map((id) => [id, reason])),
-                failed: [],
-                timings: {},
-                analysisRootError: reason,
-            };
-        }
-    }
-    else {
-        analysisRoot = realpathOrResolve(cwd);
-    }
-    // #747: refuse to spawn any heavyweight analyzer when the analysis root is
-    // at — or above — the home directory (the #250/#253 escape class). Every
-    // analyzer here treats `analysisRoot` as a whole tree to walk; from $HOME
-    // that means scanning every unrelated repo under it (observed: a jscpd run
-    // from a WSL home reached 44 GB RSS and OOM-killed the whole instance).
-    // Same ceiling as startup-scan.ts / runtime-session.ts's resolveSnapshotRoot
-    // / review-graph's buildOrUpdateGraph; like the latter, there is no safe
-    // substitute root to fall back to — the caller's `paths` scope only filters
-    // REPORTED results, it never narrows what these analyzers walk.
-    const unsafeRootReason = "the analysis root resolves at or above the home directory; heavyweight analyzers refuse to walk from there (#747)";
-    const homeRoot = realpathOrResolve(options.homeDir ?? os.homedir());
-    if (options.analysisRoot !== undefined) {
-        const unsafeExplicitRoot = !isSameOrWithin(homeRoot, analysisRoot) ||
-            isSameOrWithin(analysisRoot, homeRoot);
-        analysisRootValidation = unsafeExplicitRoot
-            ? {
-                state: "unsafe",
-                root: analysisRoot,
-                reason: "explicit analysis root must be strictly contained by the canonical home directory",
-            }
-            : { state: "safe", root: analysisRoot };
-    }
-    else if (isAtOrAboveHomeDir(analysisRoot, options.homeDir)) {
-        analysisRootValidation = {
-            state: "unsafe",
-            root: analysisRoot,
-            reason: unsafeRootReason,
-        };
-    }
-    else {
-        analysisRootValidation = { state: "safe", root: analysisRoot };
-    }
-    if (analysisRootValidation.state !== "safe") {
-        incrementDegradationCount({
-            kind: "lens-diagnostics-analysis-root-rejected",
-            subject: analysisRoot,
-            reason: analysisRootValidation.reason,
-        });
-        return {
-            analysisRootValidation,
-            diagnostics: [],
-            runners: [],
-            analyzed: [],
-            authoritativeCoverage: [],
-            cold: [...ANALYZER_IDS],
-            coldReasons: Object.fromEntries(ANALYZER_IDS.map((id) => [id, unsafeRootReason])),
-            failed: [],
-            timings: {},
-            unsafeRoot: analysisRootValidation.state === "unsafe",
-        };
-    }
-    const diagnostics = [];
-    const runners = [];
-    const analyzed = [];
-    const authoritativeCoverage = [];
-    const cold = [];
-    // #1623: the specific reason each `cold` id was skipped, captured at the
-    // gate that decided it — see FreshProjectDiagnosticsResult.coldReasons.
-    const coldReasons = {};
-    const partial = [];
-    const partialReasons = {};
-    const failed = [];
-    const timings = {};
-    // #1623: ms-old each id's data was when this call read it, for lanes that
-    // are cache-reads by design (currently only test-runner — see its task
-    // below) rather than a fresh execution this call. Absent for every other
-    // key: this module's other lanes always trigger-or-join a genuine run
-    // when attempted (see the module header), so there is nothing to date.
-    const cachedAgeMs = {};
-    const settledIds = new Set();
-    let dispositionSuppressed = 0;
-    const dispositionSuppressedByLane = {};
-    // #1617: this is the ONE choke point every analyzer's findings pass
-    // through on the way into `diagnostics`, so applying the agent/user
-    // disposition filter HERE covers the whole mode=full class (knip/jscpd/
-    // madge/gitleaks/govulncheck/opengrep/trivy/dead-code) in one place — the
-    // same anchor derivation `dispatcher.ts:924` uses, via
-    // `applyDispositionsMultiFile` (`diagnostic-dispositions.ts`), not a
-    // second cloned filter. Unlike the dispatch path's one-file-at-a-time
-    // shape, a project-wide scan's findings span many files, so this groups by
-    // each diagnostic's own `filePath` and reads each file's current content
-    // once — see that function's doc for the fail-open contract when a file
-    // can't be read.
-    function markCold(id, reason) {
-        pushUnique(cold, id);
-        coldReasons[id] = reason;
-    }
-    function markPartial(id, reason) {
-        pushUnique(partial, id);
-        partialReasons[id] = reason;
-    }
-    /**
-     * `analysedRoot` is the client's own opt-in `AnalysedRootSignal` (#2154),
-     * never a property of reaching this function: `success: true` is also what
-     * a skipped, crashed-before-reporting or memoised run returns, and only the
-     * client knows which of those it is. Findings are recorded either way — an
-     * id that did not analyse the root simply carries no authority to retire a
-     * retained finding.
-     */
-    function record(id, adapted, elapsedMs, analysedRoot, analysis) {
-        if (analysedRoot) {
-            pushUnique(analyzed, id);
-            // #2962: the entry is pushed on the DECLARATION, not on its size. A
-            // coverage producer that analysed the root and proved zero files is a
-            // third state, distinct from both "covered, file absent from the set"
-            // and "this runner declares no coverage" — and it is the only one of
-            // the three that used to fall through to the whole-root id-only arm in
-            // `runnerRetirementDecision`, retiring findings for files nothing
-            // scanned. The eight non-producer runners pass no `analyzedFiles` at
-            // all and are untouched by this.
-            if (analysis?.analyzedFiles !== undefined) {
-                const root = realpathOrResolve(analysisRoot);
-                authoritativeCoverage.push({
-                    runnerId: id,
-                    root,
-                    files: new Set(analysis.analyzedFiles.map((file) => {
-                        return realpathOrResolve(file);
-                    })),
-                });
-                if (analysis.analyzedFiles.length === 0) {
-                    // Bounded at one row per (producer, root) per session: the kept
-                    // finding is otherwise indistinguishable from a healthy run, and
-                    // "the only coverage producer proved nothing" is the fact an
-                    // operator needs when mode=full keeps showing a stale finding.
-                    recordDegradationOnce({
-                        kind: "runner-coverage-empty",
-                        subject: `${id}:${root}`,
-                        reason: `${id} analysed this root but declared zero scanned files, so retained ${id} findings are kept rather than retired`,
-                    });
-                }
-            }
-        }
-        timings[id] = (timings[id] ?? 0) + elapsedMs;
-        const kept = applyDispositionsMultiFile(adapted, analysisRoot, (d) => d.filePath);
-        const suppressedHere = adapted.length - kept.length;
-        dispositionSuppressed += suppressedHere;
-        if (suppressedHere > 0) {
-            dispositionSuppressedByLane[id] =
-                (dispositionSuppressedByLane[id] ?? 0) + suppressedHere;
-        }
-        if (kept.length > 0) {
-            diagnostics.push(...kept);
-            pushUnique(runners, id);
-        }
-    }
-    function recordFailed(id, result) {
-        failed.push({
-            id,
-            ...("reason" in result && result.reason !== undefined
-                ? { reason: result.reason }
-                : {}),
-            summary: "summary" in result && typeof result.summary === "string"
-                ? result.summary
-                : "analyzer reported an unsuccessful run",
-        });
-    }
-    function task(id, run) {
-        return run().finally(() => settledIds.add(id));
-    }
-    const tasks = [
-        // knip — always applicable to probe (KnipClient.analyze itself no-ops
-        // when no project root marker is found, matching session_start).
-        task("knip", async () => {
-            const startMs = Date.now();
-            const result = await clients.knipClient.analyze(analysisRoot, getKnipIgnorePatterns());
-            if (!result.success) {
-                recordFailed("knip", result);
-                return;
-            }
-            // knip reports `success: true` for a run that never happened (no
-            // project root, a memo hit, an unparseable exit-0). Those belong in
-            // the honest `cold` channel, not in "fetched fresh this call".
-            if (result.analyzed !== true) {
-                markCold("knip", result.summary ?? "knip did not analyse this root");
-                return;
-            }
-            cacheManager.writeCache("knip", result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("knip", knipIssuesToProjectDiagnostics(analysisRoot, result.issues ?? []), Date.now() - startMs, true, result);
-        }),
-        // jscpd — duplicate code detection. Cache key varies with TS-project
-        // detection, exactly mirroring session_start's own logic.
-        task("jscpd", async () => {
-            if (!(await clients.jscpdClient.ensureAvailable())) {
-                markCold("jscpd", reasonFromAvailabilityVerdict("jscpd", clients.jscpdClient.getAvailabilityVerdict?.()));
-                return;
-            }
-            const isTsProject = fs.existsSync(path.join(analysisRoot, "tsconfig.json"));
-            const scannerKey = isTsProject ? "jscpd-ts" : "jscpd";
-            const startMs = Date.now();
-            const result = await clients.jscpdClient.scan(analysisRoot, undefined, undefined, isTsProject);
-            if (!result.success) {
-                recordFailed("jscpd", result);
-                return;
-            }
-            if (result.analyzed !== true) {
-                markCold("jscpd", "jscpd did not analyse this root (no source files, or the scan produced no report)");
-                return;
-            }
-            cacheManager.writeCache(scannerKey, result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("jscpd", jscpdResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, true, result);
-        }),
-        // madge — circular-dependency detection.
-        task("madge", async () => {
-            if (!(await clients.depChecker.ensureAvailable())) {
-                markCold("madge", reasonFromAvailabilityVerdict("madge", clients.depChecker.getAvailabilityVerdict?.()));
-                return;
-            }
-            const startMs = Date.now();
-            const result = await clients.depChecker.scanProject(analysisRoot);
-            cacheManager.writeCache("madge", result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("madge", circularDepsToProjectDiagnostics(analysisRoot, result.circular ?? []), Date.now() - startMs, result.analyzed === true, result);
-        }),
-        // gitleaks — committed-secrets detection. session_start/per-edit stay
-        // config-gated per #130's strict default (GitleaksClient.hasGitleaksSignal),
-        // but mode=full is an explicitly-requested comprehensive review — use
-        // #130's own considered-but-unshipped "smart-default" tier instead (any
-        // tracked git repo, GitleaksClient.hasGitRepo): gitleaks is cheap (~10MB
-        // binary, no external DB pull) and findings are advisory-only, so the
-        // stricter opt-in gate is needlessly conservative for this call. Refs #608
-        // dogfooding finding that flagged gitleaks/trivy/govulncheck/dead-code as
-        // "cold" on a project with no explicit gitleaks config.
-        task("gitleaks", async () => {
-            if (!GitleaksClient.hasGitRepo(analysisRoot)) {
-                markCold("gitleaks", "not a git repository (no .git found)");
-                return;
-            }
-            if (!(await clients.gitleaksClient.ensureAvailable())) {
-                markCold("gitleaks", reasonFromAvailabilityVerdict("gitleaks", clients.gitleaksClient.getAvailabilityVerdict?.()));
-                return;
-            }
-            const startMs = Date.now();
-            const result = await clients.gitleaksClient.scan(analysisRoot, {
-                requireSignal: false,
-            });
-            if (!result.success) {
-                recordFailed("gitleaks", result);
-                return;
-            }
-            cacheManager.writeCache("gitleaks", result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("gitleaks", gitleaksResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, result.analyzed === true, result);
-        }),
-        // govulncheck — Go module CVE detection. Go-module-gated per #132.
-        task("govulncheck", async () => {
-            if (!GovulncheckClient.hasGoModule(analysisRoot)) {
-                markCold("govulncheck", "no go.mod found (not a Go module)");
-                return;
-            }
-            if (!(await clients.govulncheckClient.ensureAvailable())) {
-                // #1623 fix-round F1: `GovulncheckClient.doEnsureAvailable` has a
-                // branch (`assertInstallAllowed`, govulncheck-client.ts) that returns
-                // false WITHOUT ever touching its availability latch — a
-                // project-trust install denial, deliberately not latched so a later
-                // trust grant can retry (see that file's own comment). The latch's
-                // verdict is genuinely absent in that case, not merely unread, so
-                // check trust denial FIRST via the same taxonomy project-trust.ts
-                // already exposes, and only fall back to the probe-based verdict
-                // (a real timeout/absence) when trust isn't the reason.
-                markCold("govulncheck", isToolInstallAllowedByTrust()
-                    ? reasonFromAvailabilityVerdict("govulncheck", clients.govulncheckClient.getAvailabilityVerdict?.())
-                    : (projectTrustDenialReason() ?? "govulncheck binary unavailable"));
-                return;
-            }
-            const startMs = Date.now();
-            const result = await clients.govulncheckClient.analyze(analysisRoot);
-            if (!result.success) {
-                recordFailed("govulncheck", result);
-                return;
-            }
-            cacheManager.writeCache("govulncheck", result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("govulncheck", govulncheckResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, result.analyzed === true, result);
-        }),
-        // opengrep — full-workspace semgrep-grade security/quality findings via a
-        // single project-wide CLI scan (#584). Structurally always-on: mirrors
-        // session_start (`runtime-session.ts`) and the LSP auxiliary's own
-        // enablement (`OpengrepClient.resolveConfig` only picks WHICH rules run,
-        // never whether opengrep runs at all), so unlike gitleaks/govulncheck/trivy
-        // it carries NO static project-type gate — only an availability probe.
-        // Re-entrancy-safe like the other SecurityScanClient-family analyzers:
-        // `OpengrepClient.scan` routes through `SecurityScanClient.dedupeScan`, so a
-        // call here that races the session_start whole-tree scan of the same root
-        // JOINS the in-flight run instead of paying a second heavy scan (#883 single
-        // source of truth — the exact wiring gitleaks/trivy use above). #585: this
-        // was the one extractor registered in `extractors.ts` but MISSING here, so
-        // opengrep scanned+cached yet nothing production read it back into
-        // `lens_diagnostics mode=full` — the honesty gap (#533) this task closes.
-        task("opengrep", async () => {
-            if (!(await clients.opengrepClient.ensureAvailable())) {
-                markCold("opengrep", reasonFromAvailabilityVerdict("opengrep", clients.opengrepClient.getAvailabilityVerdict?.()));
-                return;
-            }
-            const startMs = Date.now();
-            const result = await clients.opengrepClient.scan(analysisRoot);
-            if (!result.success) {
-                recordFailed("opengrep", result);
-                return;
-            }
-            if (result.analyzed !== true) {
-                // A usable partial report with no scanned paths carries findings but
-                // no retirement authority. Keep those findings visible and mark the
-                // producer partial so the renderer does not call it cold/not-run.
-                const reason = result.summary ??
-                    result.reason ??
-                    "opengrep did not analyse this root";
-                if (result.partial)
-                    markPartial("opengrep", reason);
-                else
-                    markCold("opengrep", reason);
-                record("opengrep", opengrepResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, false, result);
-                return;
-            }
-            if (result.partial) {
-                markPartial("opengrep", result.summary ??
-                    result.reason ??
-                    "opengrep scan coverage is incomplete");
-                record("opengrep", opengrepResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, true, result);
-                return;
-            }
-            cacheManager.writeCache("opengrep", result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("opengrep", opengrepResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, result.analyzed === true, result);
-        }),
-        // trivy — dependency CVE detection. Explicit opt-in per #131.
-        task("trivy", async () => {
-            if (!TrivyClient.shouldScan(analysisRoot)) {
-                markCold("trivy", "not opted in (.pi-lens.json trivy.enabled) or no dependency manifest found");
-                return;
-            }
-            if (!(await clients.trivyClient.ensureAvailable())) {
-                markCold("trivy", reasonFromAvailabilityVerdict("trivy", clients.trivyClient.getAvailabilityVerdict?.()));
-                return;
-            }
-            const startMs = Date.now();
-            const result = await clients.trivyClient.scan(analysisRoot);
-            if (!result.success) {
-                recordFailed("trivy", result);
-                return;
-            }
-            cacheManager.writeCache("trivy", result, analysisRoot, {
-                scanDurationMs: Date.now() - startMs,
-            });
-            record("trivy", trivyResultToProjectDiagnostics(analysisRoot, result), Date.now() - startMs, result.analyzed === true, result);
-        }),
-        // dead-code — cross-file dead-code for non-JS/TS languages (#127).
-        // Each client self-gates via detect(); only matching-language projects
-        // incur the whole-tree scan. Run the applicable ones in parallel too.
-        task("dead-code", async () => {
-            const applicable = clients.deadCodeClients.filter((c) => c.detect(analysisRoot));
-            if (applicable.length === 0) {
-                markCold("dead-code", "no dead-code client detected an applicable language for this project");
-                return;
-            }
-            await Promise.all(applicable.map(async (client) => {
-                const cacheKey = `dead-code-${client.id}`;
-                const startMs = Date.now();
-                const result = await client.analyze(analysisRoot);
-                if (!result.success) {
-                    recordFailed("dead-code", result);
-                    return;
-                }
-                if (result.analyzed === true) {
-                    cacheManager.writeCache(cacheKey, result, analysisRoot, {
-                        scanDurationMs: Date.now() - startMs,
-                    });
-                }
-                const adapted = deadCodeResultToProjectDiagnostics(analysisRoot, result);
-                record("dead-code", adapted, Date.now() - startMs, result.analyzed === true, result);
-            }));
-        }),
-        // test-runner — CACHE-READ only, unlike every task above (#1004). Its
-        // session cadence doesn't fit the "trigger-or-join a fresh run" shape the
-        // rest of this module uses: the actual scan is the per-edit turn_end fire
-        // in `runtime-turn.ts`, which only ever runs the (targeted, cascade-aware)
-        // test files touched by THIS turn's edits — there is no "whole project"
-        // test run to (re-)trigger here, and unconditionally spawning a full suite
-        // on every mode=full call would be the exact "heavy re-run on every call"
-        // cost this module's other tasks avoid via de-dupe/gating. So this task
-        // instead peeks at the `"test-runner-findings"` cache turn_end already
-        // wrote — the same cache key, the same adapter
-        // (`testRunnerFindingsToProjectDiagnostics`), and the same cache-only
-        // contract the pre-#585 `extractCachedProjectDiagnostics` registry's
-        // "test-runner" row used (see extractors.ts's removal note) — before #585
-        // dropped that reader without replacing this one row's semantics here.
-        // Deliberately never calls `writeCache`: there is nothing fresher to write
-        // back, only what turn_end already produced.
-        //
-        // No double-count / honesty gap (#533): explicit `pilens_turn_end`
-        // delivery may call `consumeTestFindings` (`runtime-context.ts`) to
-        // read-and-clear this SAME cache key once. Automatic Pi delivery uses a
-        // non-context custom entry and never consumes this pull-diagnostics cache.
-        // This task only ever reads (never clears) it, so it can't race that
-        // consumption into re-delivering a message twice — at most it surfaces
-        // the same underlying failures a second time, through a different
-        // surface (the mode=full project snapshot) that was previously silently
-        // empty for this analyzer. If `consumeTestFindings` already cleared the
-        // cache before this runs, this task correctly sees nothing and reports
-        // `cold` rather than inventing stale data.
-        task("test-runner", async () => {
-            const startMs = Date.now();
-            const cached = cacheManager.readCache("test-runner-findings", analysisRoot);
-            if (!cached?.data) {
-                markCold("test-runner", "no turn_end test-runner cache entry yet this session");
-                return;
-            }
-            // #1623: unlike every other lane in this module, test-runner is a
-            // cache-read BY DESIGN (see the task's own header comment above) — it
-            // never performs a fresh run this call, so its age must be surfaced
-            // the same way a genuinely-stale cache read would be, rather than
-            // looking indistinguishable from a lane that just executed.
-            cachedAgeMs["test-runner"] =
-                Date.now() - new Date(cached.meta.timestamp).getTime();
-            record("test-runner", testRunnerFindingsToProjectDiagnostics(cached.data, analysisRoot, options.runtime), Date.now() - startMs, 
-            // Never authoritative: this lane reads the cache turn_end wrote,
-            // it never runs a suite over the root this call (#2154).
-            false);
-        }),
-    ];
-    // Swallow any later rejection so an aborted-and-abandoned task can never
-    // surface as an unhandled rejection once this function has already
-    // returned partial results below.
-    const allSettled = Promise.all(tasks)
-        .then(() => "completed")
-        .catch(() => "completed");
-    const outcome = signal
-        ? await Promise.race([
-            allSettled,
-            new Promise((resolve) => {
-                if (signal.aborted) {
-                    resolve("aborted");
-                    return;
-                }
-                signal.addEventListener("abort", () => resolve("aborted"), {
-                    once: true,
-                });
-            }),
-        ])
-        : await allSettled;
-    if (outcome === "aborted") {
-        const abortedIds = ANALYZER_IDS.filter((id) => !settledIds.has(id));
-        for (const id of abortedIds)
-            pushUnique(cold, id);
-        return {
-            analysisRootValidation,
-            diagnostics,
-            runners,
-            analyzed,
-            authoritativeCoverage,
-            cold,
-            coldReasons,
-            partial,
-            partialReasons,
-            failed,
-            timings,
-            cachedAgeMs,
-            aborted: true,
-            abortedIds,
-            dispositionSuppressed,
-            dispositionSuppressedByLane,
-        };
-    }
-    return {
-        analysisRootValidation,
-        diagnostics,
-        runners,
-        analyzed,
-        authoritativeCoverage,
-        cold,
-        coldReasons,
-        partial,
-        partialReasons,
-        failed,
-        timings,
-        cachedAgeMs,
-        dispositionSuppressed,
-        dispositionSuppressedByLane,
-    };
-}