@haus-tech/haus-workflow 1.1.2 → 1.3.0

package/library/catalog/validation-rules.json

@@ -130,6 +130,26 @@
     "collection2",
     "deployer-php"
   ],
+  "safetyNotesRequiredTags": [
+    "stripe",
+    "qliro",
+    "payments",
+    "bankid",
+    "myid",
+    "oidc",
+    "azure-ad",
+    "saml2"
+  ],
+  "intentsRequiredTags": [
+    "stripe",
+    "qliro",
+    "payments",
+    "bankid",
+    "myid",
+    "oidc",
+    "azure-ad",
+    "saml2"
+  ],
   "alwaysAllowedTags": [
     "haus",
     "security",

package/library/global/skills/haus-workflow/SKILL.md

@@ -27,7 +27,7 @@ repo's files. The short legacy aliases still work but the names below are canoni
 | ----------------------------------------------------------------- | ------------------------------- | ------- | ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
 | `project:init` (`setup`, `init`)                                  | _Setup procedure below_         | project | First-time setup of an **existing** repo: adds AI skills, commands, workflow + project docs                                                                                                                                                                                               |
 | `project:reinit` (`reinit`, `re-init`)                            | _Reinit procedure below_        | project | **Full re-setup.** Removes all haus-managed project files (backed up first, user content preserved), then re-runs `project:init` from scratch                                                                                                                                             |
-| `project:clone [name]` (`clone`)                                  | _Clone procedure below_         | project | No name: clone a **workspace**'s repos from `repos.manifest.json`. With a `name`: find & clone one repo by name from GitHub                                                                                                                                                               |
+| `project:clone [name]` (`clone`)                                  | _Clone procedure below_         | project | With a `name`: find & clone one repo by name from GitHub. No name: asks single-repo-vs-workspace first, then either mode — workspace mode clones from `repos.manifest.json`                                                                                                               |
 | `project:cloneandsetup [name]` (`cloneandsetup`)                  | _Clone & setup procedure below_ | project | Run `project:clone`, then set up each repo for local dev — deps, databases, cross-repo links, and env — via each repo's `.haus-workflow/localdev.yml` (+ the workspace's order/links/env)                                                                                                 |
 | `project:add-skills` (`add-skills`, `opt-in`)                     | _Add-skills procedure below_    | project | Add optional skills, agents, or config (ESLint/Prettier) to an already-set-up project without re-running full setup                                                                                                                                                                       |
 | `project:refresh` (`apply`, `refresh`, `claude-md`, `regenerate`) | _Refresh procedure below_       | project | **Full non-destructive sync.** Updates the haus package + catalog first, then re-runs `project:init`'s pipeline in place — nothing is removed up front; new catalog items get added, changed ones updated, and anything removed upstream gets pruned by `apply`'s existing orphan-pruning |
@@ -43,9 +43,13 @@ repo's files. The short legacy aliases still work but the names below are canoni
 **If a task argument was passed:** look it up in the alias table above. If no match, tell the user and list valid options. If matched, skip to Step 2.
 
 **If no task was passed:** the menu has more options than one `AskUserQuestion` question can
-hold (max 4 options per question). Ask two separate questions, one after another — first
-Question 1, read the answer, then ask Question 2 (a second, sequential `AskUserQuestion`
-call; do not try to cram both into a single question):
+hold (max 4 options per question). Page through all 12 tasks in batches: each page shows the
+next 3 tasks plus a 4th "More options" choice, except the last page, which shows whatever
+tasks remain (≤4) with no continuation choice — nothing is dropped, and this pattern
+generalizes automatically if a task is ever added to or removed from the alias table above
+(just re-batch in the same 3-per-page-plus-continuation shape; don't hand-tune page counts).
+Ask each question only after the previous one is answered — never try to cram multiple pages
+into a single `AskUserQuestion` call:
 
 ```
 Question 1: "What would you like to do?"
@@ -55,19 +59,36 @@ Options:
   2. [project] project:refresh — full non-destructive sync with the latest haus
      (updates the haus package + catalog, then re-runs setup in place — nothing removed first)
   3. [project] project:clone [name] — clone repos
-     (no name: clone a workspace from repos.manifest.json; with a name: find & clone one repo by name from GitHub)
-  4. [project] project:cloneandsetup [name] — clone repos, then set them up for local dev
-     (project:clone, then per-repo deps + databases + cross-repo links + env from localdev.yml)
+     (picked from here with no name yet — clone.md will ask whether it's a single repo or a whole workspace next)
+  4. [—] More options — see: project:cloneandsetup, project:add-skills, project:reinit, and 6 more
 
-Question 2: "Anything else?"
+Question 2: "What would you like to do?" (only shown if "More options" was picked)
 Options:
-  1. [project] project:add-skills — add optional skills, agents, or config to this project
+  1. [project] project:cloneandsetup [name] — clone repos, then set them up for local dev
+     (project:clone — asking single-repo-vs-workspace since no name is known yet — then per-repo deps + databases + cross-repo links + env from localdev.yml)
+  2. [project] project:add-skills — add optional skills, agents, or config to this project
      (offers opt-in helpers matching your stack that aren't installed yet — no full re-setup)
-  2. [project] project:reinit — full re-setup from scratch
+  3. [project] project:reinit — full re-setup from scratch
      (removes all haus-managed project files, backed up first, then re-runs project:init)
-  3. [global] update — update haus package + catalog + global files
+  4. [—] More options — see: update, project:doctor, project:fix, and 3 more
+
+Question 3: "What would you like to do?" (only shown if "More options" was picked again)
+Options:
+  1. [global] update — update haus package + catalog + global files
      (haus update — checks npm for new version, fetches catalog, refreshes ~/.claude/)
-  4. [—] help — explain what haus-workflow is and list all available tasks
+  2. [project] project:doctor — check for install drift
+     (haus doctor — a one-line plain-language verdict, healthy or a list of what needs attention)
+  3. [project] project:fix — diagnose and fix install drift
+     (runs doctor, applies the suggested fixes, confirms green)
+  4. [—] More options — see: install, uninstall, help
+
+Question 4: "What would you like to do?" (only shown if "More options" was picked a third time — last page, no further continuation)
+Options:
+  1. [global] install — seed ~/.claude/ with haus-owned files
+     (haus install)
+  2. [global] uninstall — remove all haus global files from ~/.claude/
+     (haus uninstall)
+  3. [—] help — explain what haus-workflow is and list all available tasks
      (touches no files — points to docs/cli.md and docs/runbook.md for depth)
 ```
 
@@ -137,11 +158,11 @@ upstream gets pruned automatically by `apply`'s existing orphan-pruning.
 
 ### Clone (`project:clone`)
 
-1. Open and follow `references/clone.md` in this skill's directory. With a `name` argument it finds and clones one matching repo from GitHub; with no argument it clones a workspace's repos from `repos.manifest.json`. This task only clones — to also install dependencies, use `project:cloneandsetup`.
+1. Open and follow `references/clone.md` in this skill's directory. With a `name` argument it finds and clones one matching repo from GitHub; with no argument (e.g. reached via the no-arg menu) it starts with clone.md's Step 0, which asks whether this is a single repo or a whole workspace before picking a mode. This task only clones — to also install dependencies, use `project:cloneandsetup`.
 
 ### Clone & setup (`project:cloneandsetup`)
 
-1. Open and follow `references/cloneandsetup.md` in this skill's directory — it runs the full `project:clone` flow, then sets up each cloned repo locally: selects the node version (`nvm install` from `.nvmrc`), enables corepack, installs JS/PHP dependencies, and seeds `.env`, confirming before each phase. It does not start servers.
+1. Open and follow `references/cloneandsetup.md` in this skill's directory — it runs the full `project:clone` flow (including clone.md's Step 0 when no name is already known), then sets up each cloned repo locally: selects the node version (`nvm install` from `.nvmrc`), enables corepack, installs JS/PHP dependencies, and seeds `.env`, confirming before each phase. It does not start servers.
 
 ### Add optional skills (`project:add-skills`)
 

package/library/global/skills/haus-workflow/references/clone.md

@@ -6,6 +6,30 @@ Cloning a single repo is always `haus clone <url> [dir]`. This procedure picks _
 
 **Always ask before cloning — never assume.** The user may already have the repos on disk. Do not start cloning until they have confirmed. A missing `repos.local.json` does **not** mean they want a fresh clone; it just means nothing is recorded yet — you must still ask.
 
+## Step 0 — determine the mode, if not already known
+
+`project:clone <name>` typed directly already tells you the mode (name given → Mode A). But
+whenever this procedure is reached with **no name** — whether from the no-arg menu
+(`SKILL.md` Step 1, where the option is just a label) or a bare `project:clone`/`clone` with
+no argument — do **not** silently fall through to Mode B (workspace); ask first, via
+`AskUserQuestion`:
+
+```
+"Clone a single repo, or a whole workspace?"
+Options:
+  1. A single repo — I'll tell you its name
+  2. A whole workspace — clone everything in repos.manifest.json
+```
+
+- **Single repo** — ask for the name/identifier as a follow-up (plain text is fine; it feeds
+  straight into Mode A's GitHub search below, which already handles 0/1/2+ matches), then
+  continue with Mode A.
+- **Whole workspace** — continue with Mode B, unchanged.
+
+Skip this step entirely when a name is already known (typed as an argument, or already
+established earlier in the conversation) — go straight to Mode A in that case, exactly as
+before this step existed.
+
 ## Mode A — a project name was given (`project:clone <name>`)
 
 Find one repo by name on GitHub and clone it. Does **not** require a workspace or `repos.manifest.json`.

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@haus-tech/haus-workflow",
-  "version": "1.1.2",
+  "version": "1.3.0",
   "description": "Haus AI workflow CLI for Claude Code.",
   "type": "module",
   "bin": {
@@ -46,25 +46,25 @@
     "diff": "8.0.4",
     "execa": "9.6.1",
     "fast-glob": "3.3.3",
-    "fs-extra": "11.3.5",
+    "fs-extra": "11.4.0",
     "semver": "7.8.5",
     "yaml": "2.9.0"
   },
   "devDependencies": {
     "@release-it/conventional-changelog": "11.0.1",
     "@types/fs-extra": "11.0.4",
-    "@types/node": "22.20.0",
+    "@types/node": "22.20.1",
     "@types/semver": "7.7.1",
-    "@typescript-eslint/eslint-plugin": "8.59.3",
-    "@typescript-eslint/parser": "8.59.3",
+    "@typescript-eslint/eslint-plugin": "8.65.0",
+    "@typescript-eslint/parser": "8.65.0",
     "c8": "11.0.0",
     "esbuild": "0.28.1",
-    "eslint": "9.39.4",
+    "eslint": "9.39.5",
     "eslint-plugin-import": "2.32.0",
     "lefthook": "1.13.6",
-    "prettier": "3.8.4",
-    "release-it": "20.2.0",
-    "tsx": "4.22.4",
+    "prettier": "3.9.6",
+    "release-it": "20.2.1",
+    "tsx": "4.23.1",
     "typescript": "5.9.3"
   },
   "engines": {
@@ -73,7 +73,7 @@
   "publishConfig": {
     "access": "public"
   },
-  "packageManager": "yarn@4.15.0",
+  "packageManager": "yarn@4.18.0",
   "dependenciesMeta": {
     "lefthook": {
       "built": true