@hanzlaa/rcode 3.6.16 → 4.1.0

package/rihal/workflows/execute.md

@@ -1,1051 +0,0 @@
-<purpose>
-Execute all plans in a phase using wave-based parallel execution. Orchestrator stays lean — delegates plan execution to subagents.
-</purpose>
-
-<pre_flight>
-**Mandatory before execution begins.** Run these checks first and surface
-findings BEFORE any subagents are spawned. If any check fails, stop and
-route back to the user.
-
-1. **Init state**: `node .rihal/bin/rihal-tools.cjs init execute {N}`
-2. **Phase index**: list all plans via `phase-plan-index {N}` — extract
-   plan count, wave count, autonomy flag per plan, files_modified overlaps
-3. **Anti-patterns**: check for `.continue-here.md` (paused state), STATE.md
-   error flag, existing VERIFICATION.md with FAIL items without overrides
-4. **Branch check** (issue #659): confirm current git branch is appropriate
-   for the work. Two checks, both blocking:
-
-   a. **Not on main/master without consent**: if `git branch --show-current`
-      returns `main` or `master`, refuse to execute. Suggest:
-      `git switch -c <phase>-<plan>-<slug>` (e.g. `git switch -c 8-1-aria`).
-      User can override only by passing `--allow-main` to /rihal-execute and
-      explicitly typing the override on this turn.
-
-   b. **Working tree clean enough**: if `git status --porcelain` shows
-      modified files unrelated to this phase's `files_modified` frontmatter,
-      surface them and ask whether to commit, stash, or proceed. Real-session
-      repro: P0 CSS fixes landed loose in a dirty tree with no commit
-      boundary.
-
-   The branch name should align with the phase/plan IDs from state — check
-   `workflow.branch_pattern` config (default `<phase>-<plan>-<slug>`).
-5. **Worktree config**: read `workflow.use_worktrees` — if true + parallelization
-   is true + no file overlaps, plans in a wave run parallel via worktrees
-</pre_flight>
-
-<insight_block>
-After pre-flight, emit an insight block with the 2-3 most load-bearing
-observations from phase inspection. Format exactly:
-
-```
-★ Insight ─────────────────────────────────────
-  - {observation 1: key scope reality}
-  - {observation 2: forced-sequential / overlap / checkpoint flags}
-  - {observation 3: autonomous-false plans needing human presence}
-─────────────────────────────────────────────────
-```
-
-Keep to 3 bullets. Name specific files and plan IDs. No generic advice.
-</insight_block>
-
-<execution_plan>
-After insight block, render a table of waves × plans:
-
-```
-Execution Plan
-
-Phase {NN}: {phase_name} — {N} plans across {M} waves{, building {one-line outcome}}.
-
-┌──────┬───────┬───────────────┬──────────────────────────────────────────────┐
-│ Wave │ Plan  │   Autonomy    │                 What it builds                │
-├──────┼───────┼───────────────┼──────────────────────────────────────────────┤
-│ 1    │ NN-01 │ 🛑 checkpoint │ {one-line what it builds}                    │
-│ 1    │ NN-02 │ auto          │ {one-line what it builds}                    │
-│ 2    │ NN-03 │ auto          │ {one-line what it builds}                    │
-└──────┴───────┴───────────────┴──────────────────────────────────────────────┘
-```
-
-Below the table, flag any wave forced to sequential (file overlaps) and
-why. One sentence reality check about scope size (file count, token cost,
-wall-clock expectation).
-</execution_plan>
-
-<three_options>
-Check config mode first:
-```bash
-CONFIG_MODE=$(node .rihal/bin/rihal-tools.cjs config-get mode 2>/dev/null || echo "guided")
-```
-
-**If `CONFIG_MODE == "yolo"` or `$ARGUMENTS` contains `--auto`:** Skip the menu. Auto-select **A) Autonomous run** and print one line: `▶ Auto-selecting Autonomous run (yolo mode). /rihal-settings set mode guided to change.`
-
-Otherwise, offer three modes via AskUserQuestion. Each option names the tradeoff explicitly:
-
-**A) Autonomous run** — Spawn subagent per plan in sequence/parallel per
-    wave rules. Checkpoints still pause for user. Fastest wall-clock.
-    Highest token cost. Least visibility mid-plan.
-
-**B) Interactive mode** (`--interactive`) — Execute plans inline in the
-    current context (no subagents). Pair-programming style. Lower token
-    cost. Catch mistakes early. Best for design-heavy or novel work.
-
-**C) Wave-only** (`--wave N`) — Run just one wave now, review, then run
-    later waves in a separate session. Good for staged rollout / review
-    gates.
-
-Include a recommendation line: "My recommendation: {letter} because {reason
-in one clause}." Then ask which option to proceed with — do NOT silently
-pick one.
-</three_options>
-
-<output_format>
-Open with banner:
-
-```
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- RIHAL ► EXECUTING PHASE {NN}
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-```
-
-Use TaskCreate at start, one entry per wave:
-- TaskCreate: "Wave 1: {N} plan(s) in parallel"
-- TaskCreate: "Wave 2: {N} plan(s) in parallel"
-- TaskCreate: "Write phase SUMMARY.md"
-- TaskCreate: "Run verifier gate"
-
-Per-wave banner as each begins:
-```
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- RIHAL ► EXECUTING WAVE {N}
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-
-◆ Spawning {N} rihal-executor agents in parallel...
-```
-
-Per-agent completion:
-```
-✓ rihal-executor complete: {plan-id} → SUMMARY.md ({N} commits)
-```
-
-Closure:
-```
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
- RIHAL ► PHASE {NN} COMPLETE ✓
-━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-```
-End with Next Up block routing to /rihal-verify-work or /rihal-next.
-</output_format>
-
-<core_principle>
-Orchestrator coordinates, not executes. Each subagent loads the full execute-sprint context. Orchestrator: discover plans → analyze deps → group waves → spawn agents → handle checkpoints → collect results.
-</core_principle>
-
-<runtime_compatibility>
-**Subagent spawning is runtime-specific:**
-- **Claude Code:** Uses `Task(subagent_type="rihal-executor",
-  model="{executor_model}", ...)` — blocks until complete, returns result
-- **Copilot:** Subagent spawning does not reliably return completion signals. **Default to
-  sequential inline execution**: read and follow execute-sprint.md directly for each plan
-  instead of spawning parallel agents. Only attempt parallel spawning if the user
-  explicitly requests it — and in that case, rely on the spot-check fallback in step 3
-  to detect completion.
-- **Other runtimes:** If `Task`/`task` tool is unavailable, use sequential inline execution as the
-  fallback. Check for tool availability at runtime rather than assuming based on runtime name.
-
-**Fallback rule:** If a spawned agent completes its work (commits visible, SUMMARY.md exists) but
-the orchestrator never receives the completion signal, treat it as successful based on spot-checks
-and continue to the next wave/plan. Never block indefinitely waiting for a signal — always verify
-via filesystem and git state.
-</runtime_compatibility>
-
-<required_reading>
-@.rihal/references/auto-init-guard.md
-@.rihal/references/output-format.md
-@.rihal/references/git-preflight.md
-Read STATE.md before any operation to load project context.
-
-@.rihal/references/agent-contracts.md
-@.rihal/references/context-budget.md
-@.rihal/references/gates.md
-@.rihal/references/karpathy-guidelines.md
-@.rihal/references/execution-protocol.md
-</required_reading>
-
-<available_agent_types>
-These are the valid Rihal subagent types registered in .claude/agents/ (or equivalent for your runtime).
-Always use the exact name from this list — do not fall back to 'general-purpose' or other built-in types:
-
-- rihal-executor — Executes plan tasks, commits, creates SUMMARY.md
-- rihal-verifier — Verifies phase completion, checks quality gates
-- rihal-planner — Creates detailed plans from phase scope
-- rihal-phase-researcher — Researches technical approaches for a phase
-- rihal-sprint-checker — Reviews plan quality before execution
-- rihal-debugger — Diagnoses and fixes issues
-- rihal-codebase-mapper — Maps project structure and dependencies
-- rihal-integration-checker — Checks cross-phase integration
-- rihal-nyquist-auditor — Validates verification coverage
-- rihal-ux-designer — Researches UI/UX approaches
-- rihal-ui-auditor — Reviews UI implementation quality
-- rihal-ui-auditor — Audits UI against design requirements
-</available_agent_types>
-
-<process>
-
-<step name="parse_args" priority="first">
-Parse `$ARGUMENTS` before loading any context:
-
-- First positional token → `PHASE_ARG`
-- Optional `--wave N` → `WAVE_FILTER`
-- Optional `--gaps-only` keeps its current meaning
-
-If `--wave` is absent, preserve the current behavior of executing all incomplete waves in the phase.
-</step>
-
-<step name="initialize" priority="first">
-Load all context in one call:
-
-```bash
-INIT=$(node ".rihal/bin/rihal-tools.cjs" init execute "${PHASE_ARG}")
-if [[ "$INIT" == @file:* ]]; then INIT=$(cat "${INIT#@file:}"); fi
-AGENT_SKILLS=$(node ".rihal/bin/rihal-tools.cjs" agent-skills rihal-executor 2>/dev/null)
-```
-
-Parse JSON for: `executor_model`, `verifier_model`, `commit_docs`, `parallelization`, `branching_strategy`, `branch_name`, `phase_found`, `phase_dir`, `phase_number`, `phase_name`, `phase_slug`, `plans`, `incomplete_plans`, `plan_count`, `incomplete_count`, `state_exists`, `roadmap_exists`, `phase_req_ids`, `response_language`.
-
-**If `response_language` is set:** Include `response_language: {value}` in all spawned subagent prompts so any user-facing output stays in the configured language.
-
-Read worktree config:
-
-```bash
-USE_WORKTREES=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow.use_worktrees 2>/dev/null || echo "true")
-```
-
-When `USE_WORKTREES` is `false`, all executor agents run without `isolation="worktree"` — they execute sequentially on the main working tree instead of in parallel worktrees.
-
-Read context window size for adaptive prompt enrichment:
-
-```bash
-CONTEXT_WINDOW=$(node ".rihal/bin/rihal-tools.cjs" config-get context_window 2>/dev/null || echo "200000")
-
-# Detect if any SPRINT.md in this phase references a checkpoint — used to lazy-load checkpoints.md
-SPRINT_HAS_CHECKPOINT=$(grep -rl "checkpoint" "${phase_dir}"/*-SPRINT.md 2>/dev/null | head -1)
-PRIOR_WAVE_FAILED=false  # set to true by wave failure handler if a prior wave errored
-```
-
-When `CONTEXT_WINDOW >= 500000` (1M-class models), subagent prompts include richer context:
-- Executor agents receive prior wave SUMMARY.md files and the phase CONTEXT.md/RESEARCH.md
-- Verifier agents receive all SPRINT.md, SUMMARY.md, CONTEXT.md files plus REQUIREMENTS.md
-- This enables cross-phase awareness and history-aware verification
-
-**If `phase_found` is false:** Error — phase directory not found.
-**If `plan_count` is 0:** Error — no plans found in phase.
-**If `state_exists` is false but `.planning/` exists:** Offer reconstruct or continue.
-
-When `parallelization` is false, plans within a wave execute sequentially.
-
-**Runtime detection for Copilot:**
-Check if the current runtime is Copilot by testing for the `@rihal-executor` agent pattern
-or absence of the `Task()` subagent API. If running under Copilot, force sequential inline
-execution regardless of the `parallelization` setting — Copilot's subagent completion
-signals are unreliable (see `<runtime_compatibility>`). Set `COPILOT_SEQUENTIAL=true`
-internally and skip the `execute_waves` step in favor of `check_interactive_mode`'s
-inline path for each plan.
-
-**REQUIRED — Sync chain flag with intent.** If user invoked manually (no `--auto`), clear the ephemeral chain flag from any previous interrupted `--auto` chain. This prevents stale `_auto_chain_active: true` from causing unwanted auto-advance. This does NOT touch `workflow.auto_advance` (the user's persistent settings preference). You MUST execute this bash block before any config reads:
-```bash
-# REQUIRED: prevents stale auto-chain from previous --auto runs
-if [[ ! "$ARGUMENTS" =~ --auto ]]; then
-  node ".rihal/bin/rihal-tools.cjs" config-set workflow._auto_chain_active false 2>/dev/null
-fi
-```
-</step>
-
-<step name="create_phase_snapshot" priority="first">
-**Create a pre-execution git tag so `/rihal-undo --phase NN --to-snapshot` can restore to this exact state.**
-
-Only runs when inside a git repository with a valid HEAD (skip silently for fresh/empty repos).
-
-```bash
-if git rev-parse --verify HEAD >/dev/null 2>&1; then
-  SNAPSHOT_TAG="rihal/snapshot/phase-${phase_number}"
-  if git rev-parse --verify "refs/tags/${SNAPSHOT_TAG}" >/dev/null 2>&1; then
-    PREV_SHA=$(git rev-parse --short "${SNAPSHOT_TAG}")
-    git tag -d "${SNAPSHOT_TAG}" >/dev/null 2>&1
-    echo "Replaced prior snapshot (was at ${PREV_SHA})"
-  fi
-  git tag -a "${SNAPSHOT_TAG}" -m "Pre-execution snapshot for phase ${phase_number}" HEAD 2>/dev/null \
-    && echo "✓ Snapshot: ${SNAPSHOT_TAG} @ $(git rev-parse --short HEAD)" \
-    || echo "⚠ Could not create snapshot tag (non-fatal — undo --to-snapshot will be unavailable for this phase)"
-fi
-```
-
-Tags are local-only by default (never auto-pushed), honoring the repo's push policy.
-</step>
-
-<step name="check_blocking_antipatterns" priority="first">
-**MANDATORY — Check for blocking anti-patterns before any other work.**
-
-Look for a `.continue-here.md` in the current phase directory:
-
-```bash
-ls ${phase_dir}/.continue-here.md 2>/dev/null || true
-```
-
-If `.continue-here.md` exists, parse its "Critical Anti-Patterns" table for rows with `severity` = `blocking`.
-
-**If one or more `blocking` anti-patterns are found:**
-
-This step cannot be skipped. Before proceeding to `check_interactive_mode` or any other step, the agent must demonstrate understanding of each blocking anti-pattern by answering all three questions for each one:
-
-1. **What is this anti-pattern?** — Describe it in your own words, not by quoting the handoff.
-2. **How did it manifest?** — Explain the specific failure that caused it to be recorded.
-3. **What structural mechanism (not acknowledgment) prevents it?** — Name the concrete step, checklist item, or enforcement mechanism that stops recurrence.
-
-Write these answers inline before continuing. If a blocking anti-pattern cannot be answered from the context in `.continue-here.md`, stop and ask the user for clarification.
-
-**If no `.continue-here.md` exists, or no `blocking` rows are found:** Proceed directly to `check_interactive_mode`.
-</step>
-
-<step name="check_interactive_mode">
-**Parse `--interactive` flag from $ARGUMENTS.**
-
-**If `--interactive` flag present:** Switch to interactive execution mode.
-
-Interactive mode executes plans sequentially **inline** (no subagent spawning) with user
-checkpoints between tasks. The user can review, modify, or redirect work at any point.
-
-**Interactive execution flow:**
-
-1. Load plan inventory as normal (discover_and_group_plans)
-2. For each plan (sequentially, ignoring wave grouping):
-
-   a. **Present the plan to the user:**
-      ```
-      ## Plan {plan_id}: {plan_name}
-
-      Objective: {from plan file}
-      Tasks: {task_count}
-
-      Options:
-      - Execute (proceed with all tasks)
-      - Review first (show task breakdown before starting)
-      - Skip (move to next plan)
-      - Stop (end execution, save progress)
-      ```
-
-   b. **If "Review first":** Read and display the full plan file. Ask again: Execute, Modify, Skip.
-
-   c. **If "Execute":** Read and follow `.rihal/workflows/execute-sprint.md` **inline**
-      (do NOT spawn a subagent). Execute tasks one at a time.
-
-   d. **After each task:** Pause briefly. If the user intervenes (types anything), stop and address
-      their feedback before continuing. Otherwise proceed to next task.
-
-   e. **After plan complete:** Show results, commit, create SUMMARY.md, then present next plan.
-
-3. After all plans: proceed to verification (same as normal mode).
-
-**Benefits of interactive mode:**
-- No subagent overhead — dramatically lower token usage
-- User catches mistakes early — saves costly verification cycles
-- Maintains Rihal's planning/tracking structure
-- Best for: small phases, bug fixes, verification gaps, learning Rihal
-
-**Skip to handle_branching step** (interactive plans execute inline after grouping).
-</step>
-
-<step name="handle_branching">
-Check `branching_strategy` from init:
-
-**"none":** Skip, continue on current branch.
-
-**"phase" or "milestone":** Use pre-computed `branch_name` from init:
-```bash
-git checkout -b "$BRANCH_NAME" 2>/dev/null || git checkout "$BRANCH_NAME"
-```
-
-All subsequent commits go to this branch. User handles merging.
-</step>
-
-<step name="validate_phase">
-From init JSON: `phase_dir`, `plan_count`, `incomplete_count`.
-
-Report: "Found {plan_count} plans in {phase_dir} ({incomplete_count} incomplete)"
-
-**Update STATE.md for phase start:**
-```bash
-node ".rihal/bin/rihal-tools.cjs" state begin-phase --phase "${PHASE_NUMBER}" --name "${PHASE_NAME}" --plans "${PLAN_COUNT}"
-```
-This updates Status, Last Activity, Current focus, Current Position, and plan counts in STATE.md so frontmatter and body text reflect the active phase immediately.
-</step>
-
-<step name="discover_and_group_plans">
-Load plan inventory with wave grouping in one call:
-
-```bash
-PLAN_INDEX=$(node ".rihal/bin/rihal-tools.cjs" phase-plan-index "${PHASE_NUMBER}")
-```
-
-Parse JSON for: `phase`, `plans[]` (each with `id`, `wave`, `autonomous`, `objective`, `files_modified`, `task_count`, `has_summary`), `waves` (map of wave number → plan IDs), `incomplete`, `has_checkpoints`.
-
-**Filtering:** Skip plans where `has_summary: true`. If `--gaps-only`: also skip non-gap_closure plans. If `WAVE_FILTER` is set: also skip plans whose `wave` does not equal `WAVE_FILTER`.
-
-**Wave safety check:** If `WAVE_FILTER` is set and there are still incomplete plans in any lower wave that match the current execution mode, STOP and tell the user to finish earlier waves first. Do not let Wave 2+ execute while prerequisite earlier-wave plans remain incomplete.
-
-If all filtered: "No matching incomplete plans" → exit.
-
-Report:
-```
-## Execution Plan
-
-**Phase {X}: {Name}** — {total_plans} matching plans across {wave_count} wave(s)
-
-{If WAVE_FILTER is set: `Wave filter active: executing only Wave {WAVE_FILTER}`.}
-
-| Wave | Plans | What it builds |
-|------|-------|----------------|
-| 1 | 01-01, 01-02 | {from plan objectives, 3-8 words} |
-| 2 | 01-03 | ... |
-```
-</step>
-
-
-@rihal/workflows/execute-waves.md
-
-
-<step name="checkpoint_handling">
-Plans with `autonomous: false` require user interaction.
-
-**Auto-mode checkpoint handling:**
-
-Read auto-advance config (chain flag + user preference):
-```bash
-AUTO_CHAIN=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow._auto_chain_active 2>/dev/null || echo "false")
-AUTO_CFG=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow.auto_advance 2>/dev/null || echo "false")
-```
-
-When executor returns a checkpoint AND (`AUTO_CHAIN` is `"true"` OR `AUTO_CFG` is `"true"`):
-- **human-verify** → Auto-spawn continuation agent with `{user_response}` = `"approved"`. Log `⚡ Auto-approved checkpoint`.
-- **decision** → Auto-spawn continuation agent with `{user_response}` = first option from checkpoint details. Log `⚡ Auto-selected: [option]`.
-- **human-action** → Present to user (existing behavior below). Auth gates cannot be automated.
-
-**Standard flow (not auto-mode, or human-action type):**
-
-1. Spawn agent for checkpoint plan
-2. Agent runs until checkpoint task or auth gate → returns structured state
-3. Agent return includes: completed tasks table, current task + blocker, checkpoint type/details, what's awaited
-4. **Present to user:**
-   ```
-   ## Checkpoint: [Type]
-
-   **Plan:** 03-03 Dashboard Layout
-   **Progress:** 2/3 tasks complete
-
-   [Checkpoint Details from agent return]
-   [Awaiting section from agent return]
-   ```
-5. User responds: "approved"/"done" | issue description | decision selection
-6. **Spawn continuation agent (NOT resume)** using continuation-prompt.md template:
-   - `{completed_tasks_table}`: From checkpoint return
-   - `{resume_task_number}` + `{resume_task_name}`: Current task
-   - `{user_response}`: What user provided
-   - `{resume_instructions}`: Based on checkpoint type
-7. Continuation agent verifies previous commits, continues from resume point
-8. Repeat until plan completes or user stops
-
-**Why fresh agent, not resume:** Resume relies on internal serialization that breaks with parallel tool calls. Fresh agents with explicit state are more reliable.
-
-**Checkpoints in parallel waves:** Agent pauses and returns while other parallel agents may complete. Present checkpoint, spawn continuation, wait for all before next wave.
-</step>
-
-<step name="aggregate_results">
-After all waves:
-
-```markdown
-## Phase {X}: {Name} Execution Complete
-
-**Waves:** {N} | **Plans:** {M}/{total} complete
-
-| Wave | Plans | Status |
-|------|-------|--------|
-| 1 | plan-01, plan-02 | ✓ Complete |
-| CP | plan-03 | ✓ Verified |
-| 2 | plan-04 | ✓ Complete |
-
-### Plan Details
-1. **03-01**: [one-liner from SUMMARY.md]
-2. **03-02**: [one-liner from SUMMARY.md]
-
-### Issues Encountered
-[Aggregate from SUMMARYs, or "None"]
-```
-
-**Security gate check:**
-```bash
-SECURITY_CFG=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow.security_enforcement --raw 2>/dev/null || echo "true")
-SECURITY_FILE=$(ls "${PHASE_DIR}"/*-SECURITY.md 2>/dev/null | head -1)
-```
-
-If `SECURITY_CFG` is `false`: skip.
-
-If `SECURITY_CFG` is `true` AND `SECURITY_FILE` is empty (no SECURITY.md yet):
-Include in the next-steps routing output:
-```
-⚠ Security enforcement enabled — run before advancing:
-  /rihal-secure-phase {PHASE} ${Rihal_WS}
-```
-
-If `SECURITY_CFG` is `true` AND SECURITY.md exists: check frontmatter `threats_open`. If > 0:
-```
-⚠ Security gate: {threats_open} threats open
-  /rihal-secure-phase {PHASE} — resolve before advancing
-```
-</step>
-
-<step name="handle_partial_wave_execution">
-If `WAVE_FILTER` was used, re-run plan discovery after execution:
-
-```bash
-POST_PLAN_INDEX=$(node ".rihal/bin/rihal-tools.cjs" phase-plan-index "${PHASE_NUMBER}")
-```
-
-Apply the same "incomplete" filtering rules as earlier:
-- ignore plans with `has_summary: true`
-- if `--gaps-only`, only consider `gap_closure: true` plans
-
-**If incomplete plans still remain anywhere in the phase:**
-- STOP here
-- Do NOT run phase verification
-- Do NOT mark the phase complete in ROADMAP/STATE
-- Present:
-
-```markdown
-## Wave {WAVE_FILTER} Complete
-
-Selected wave finished successfully. This phase still has incomplete plans, so phase-level verification and completion were intentionally skipped.
-
-/rihal-execute {phase} ${Rihal_WS}                # Continue remaining waves
-/rihal-execute {phase} --wave {next} ${Rihal_WS}  # Run the next wave explicitly
-```
-
-**If no incomplete plans remain after the selected wave finishes:**
-- continue with the normal phase-level verification and completion flow below
-- this means the selected wave happened to be the last remaining work in the phase
-</step>
-
-<step name="run_verify_commands">
-**Run per-task `<verify>` shell commands from all completed SPRINT.md plans.**
-
-After all executor agents finish, extract and run any `<verify>` blocks defined in plan tasks. These are the machine-executable counterpart to `<acceptance_criteria>` prose.
-
-```bash
-# Extract all <verify> blocks from all SPRINT.md files for this phase
-for plan in "${PHASE_DIR}"/*-SPRINT.md; do
-  python3 -c "
-import re, sys
-content = open('$plan').read()
-verifies = re.findall(r'<verify>(.*?)</verify>', content, re.DOTALL)
-for v in verifies:
-    for line in v.strip().splitlines():
-        line = line.strip()
-        if line:
-            print(line)
-" 2>/dev/null
-done
-```
-
-Run each extracted command. Collect results:
-- Exit 0 → `✓ PASS`
-- Non-zero → `❌ FAIL: {command}`
-
-**If any verify command fails:**
-```
-⚠ Task verify commands failed:
-
-  ❌ {command}
-  Output: {stderr/stdout}
-
-These are task-level acceptance checks. Fix before proceeding to code review.
-/rihal-debug "verify command failed: {command}" — diagnose the failure
-```
-STOP — do not proceed to `code_review_gate` until all verify commands pass or the user explicitly overrides.
-
-**If all pass (or no `<verify>` blocks exist):** proceed to `code_review_gate` silently.
-
-**Skip if:** `--skip-verify` flag is set.
-</step>
-
-<step name="code_review_gate" required="true">
-**This step is REQUIRED and must not be skipped.** Spawn `rihal-code-reviewer` to review the phase's source changes. Acts as a BLOCKING gate before the verifier when critical or high findings are present.
-
-**Config gate (default ON):**
-```bash
-CODE_REVIEW_ENABLED=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow.code_review_enabled 2>/dev/null || echo "true")
-```
-
-If `CODE_REVIEW_ENABLED` is `"false"`: display "Code review skipped (workflow.code_review_enabled=false)" and proceed to `close_parent_artifacts`.
-
-**Resolve reviewer model:**
-```bash
-REVIEWER_MODEL=$(node ".rihal/bin/rihal-tools.cjs" resolve-model code-reviewer 2>/dev/null | node -e "let d='';process.stdin.on('data',c=>d+=c).on('end',()=>{try{console.log(JSON.parse(d).model)}catch{console.log('')}})" || echo "sonnet")
-REVIEWER_MODEL=${REVIEWER_MODEL:-sonnet}
-REVIEWER_SKILLS=$(node ".rihal/bin/rihal-tools.cjs" agent-skills rihal-code-reviewer 2>/dev/null || echo "")
-# Issue #652 — no leading zeros. Variable name kept for backward compat in this workflow.
-PADDED="${PHASE_NUMBER}"
-REVIEW_FILE="${PHASE_DIR}/${PADDED}-REVIEW.md"
-```
-
-**Spawn the reviewer agent:**
-```
-Task(
-  description="Code review for phase {phase_number}",
-  prompt="Review the source code changes for phase {phase_number}.
-Phase directory: {phase_dir}
-Phase goal: {goal from ROADMAP.md}
-
-Read all plan files and summaries in the phase directory, then review the source files actually modified (from SUMMARY.md `key-files.created`/`modified`). Classify each finding by severity: critical, high, medium, or low.
-
-Write the review to: ${REVIEW_FILE}
-
-The file MUST begin with YAML frontmatter including:
----
-status: clean | issues_found | skipped
-phase: {phase_number}
-critical: <count>
-high: <count>
-medium: <count>
-low: <count>
-generated: <ISO timestamp>
----
-
-Group findings by severity. For each finding include: file path, line reference, description, recommended fix.
-
-${REVIEWER_SKILLS}",
-  subagent_type="rihal-code-reviewer",
-  model="${REVIEWER_MODEL}"
-)
-```
-
-**Error handling:** If the Task invocation fails or throws, display "Code review encountered an error (non-blocking): {error}" and proceed to `close_parent_artifacts`. A broken reviewer must never permanently block execution.
-
-**Parse severity counts:**
-```bash
-# Fail-safe defaults — malformed/missing frontmatter must NOT bypass the gate (#602).
-# Empty string compared against an integer in bash evaluates to false, which
-# would silently let critical findings through. Default missing to a sentinel
-# that fails the gate so a bad REVIEW.md is treated as "block, ask the user".
-REVIEW_STATUS="malformed"
-CRITICAL_COUNT=0
-HIGH_COUNT=0
-MEDIUM_COUNT=0
-LOW_COUNT=0
-REVIEW_PARSE_OK=false
-if [[ -f "$REVIEW_FILE" ]]; then
-  FRONTMATTER=$(sed -n '/^---$/,/^---$/p' "$REVIEW_FILE")
-  PARSED_STATUS=$(echo "$FRONTMATTER" | grep "^status:" | head -1 | cut -d: -f2 | tr -d ' ')
-  PARSED_CRIT=$(echo "$FRONTMATTER"   | grep "^critical:" | head -1 | cut -d: -f2 | tr -d ' ')
-  PARSED_HIGH=$(echo "$FRONTMATTER"   | grep "^high:"     | head -1 | cut -d: -f2 | tr -d ' ')
-  PARSED_MED=$(echo "$FRONTMATTER"    | grep "^medium:"   | head -1 | cut -d: -f2 | tr -d ' ')
-  PARSED_LOW=$(echo "$FRONTMATTER"    | grep "^low:"      | head -1 | cut -d: -f2 | tr -d ' ')
-  # Accept the parse only when status + all four counts are present AND counts
-  # are pure digits. Anything else = malformed → block and ask.
-  if [[ -n "$PARSED_STATUS" \
-        && "$PARSED_CRIT" =~ ^[0-9]+$ \
-        && "$PARSED_HIGH" =~ ^[0-9]+$ \
-        && "$PARSED_MED"  =~ ^[0-9]+$ \
-        && "$PARSED_LOW"  =~ ^[0-9]+$ ]]; then
-    REVIEW_STATUS="$PARSED_STATUS"
-    CRITICAL_COUNT="$PARSED_CRIT"
-    HIGH_COUNT="$PARSED_HIGH"
-    MEDIUM_COUNT="$PARSED_MED"
-    LOW_COUNT="$PARSED_LOW"
-    REVIEW_PARSE_OK=true
-  fi
-fi
-
-# Malformed REVIEW.md = treat as a blocking finding. The gate must NEVER
-# silently pass when it can't read the report (#602).
-if [[ "$REVIEW_PARSE_OK" != "true" ]]; then
-  echo "⛔ Code review gate: REVIEW.md missing or malformed at ${REVIEW_FILE}."
-  echo "   Cannot determine severity counts. Treating as blocking — re-run the reviewer."
-  CRITICAL_COUNT=1   # force the gate to block; user can override below
-fi
-```
-
-**Blocking gate on critical/high:**
-
-If `CRITICAL_COUNT > 0` OR `HIGH_COUNT > 0`, present the block banner and use AskUserQuestion:
-
-```
-## ⛔ Code Review Gate: Blocking Findings
-
-Phase {phase_number} code review found:
-  critical: ${CRITICAL_COUNT}
-  high:     ${HIGH_COUNT}
-  medium:   ${MEDIUM_COUNT}
-  low:      ${LOW_COUNT}
-
-Report: ${REVIEW_FILE}
-
-Verifier is blocked until critical/high findings are resolved.
-```
-
-AskUserQuestion with options:
-1. **"Run /rihal-code-review-fix first (recommended)"** — Stop. Print next command: `/rihal-code-review-fix ${PHASE_NUMBER} ${Rihal_WS}`. Do NOT spawn verifier.
-2. **"Proceed to verifier anyway (high findings unresolved)"** — Log override and continue to `close_parent_artifacts` → `regression_gate` → `verify_phase_goal`.
-3. **"Cancel execution"** — Stop. Report partial completion.
-
-**Advisory line on medium/low only:**
-
-If `CRITICAL_COUNT == 0` AND `HIGH_COUNT == 0` AND (`MEDIUM_COUNT > 0` OR `LOW_COUNT > 0`), display:
-```
-⚠ Code review found non-blocking findings (medium: ${MEDIUM_COUNT}, low: ${LOW_COUNT}).
-  Report: ${REVIEW_FILE}
-  Consider: /rihal-code-review-fix ${PHASE_NUMBER}
-```
-Then continue to `close_parent_artifacts`.
-
-**Clean review:** If `REVIEW_STATUS == "clean"` (or all counts are zero), display "✓ Code review clean" and continue.
-
-Only when the gate is clean or the user overrides do we proceed to close_parent_artifacts → regression_gate → verify_phase_goal.
-</step>
-
-<step name="close_parent_artifacts">
-**For decimal/polish phases only (X.Y pattern):** Close the feedback loop by resolving parent UAT and debug artifacts.
-
-**Skip if** phase number has no decimal (e.g., `3`, `04`) — only applies to gap-closure phases like `4.1`, `03.1`.
-
-**1. Detect decimal phase and derive parent:**
-```bash
-# Check if phase_number contains a decimal
-if [[ "$PHASE_NUMBER" == *.* ]]; then
-  PARENT_PHASE="${PHASE_NUMBER%%.*}"
-fi
-```
-
-**2. Find parent UAT file:**
-```bash
-PARENT_INFO=$(node ".rihal/bin/rihal-tools.cjs" find-phase "${PARENT_PHASE}" --raw)
-# Extract directory from PARENT_INFO JSON, then find UAT file in that directory
-```
-
-**If no parent UAT found:** Skip this step (gap-closure may have been triggered by VERIFICATION.md instead).
-
-**3. Update UAT gap statuses:**
-
-Read the parent UAT file's `## Gaps` section. For each gap entry with `status: failed`:
-- Update to `status: resolved`
-
-**4. Update UAT frontmatter:**
-
-If all gaps now have `status: resolved`:
-- Update frontmatter `status: diagnosed` → `status: resolved`
-- Update frontmatter `updated:` timestamp
-
-**5. Resolve referenced debug sessions:**
-
-For each gap that has a `debug_session:` field:
-- Read the debug session file
-- Update frontmatter `status:` → `resolved`
-- Update frontmatter `updated:` timestamp
-- Move to resolved directory:
-```bash
-mkdir -p .planning/debug/resolved
-mv .planning/debug/{slug}.md .planning/debug/resolved/
-```
-
-**6. Commit updated artifacts:**
-```bash
-node ".rihal/bin/rihal-tools.cjs" commit "docs(phase-${PARENT_PHASE}): resolve UAT gaps and debug sessions after ${PHASE_NUMBER} gap closure" --files .planning/phases/*${PARENT_PHASE}*/*-UAT.md .planning/debug/resolved/*.md
-```
-</step>
-
-
-@rihal/workflows/execute-regression-gates.md
-
-
-
-@rihal/workflows/execute-verify-phase-goal.md
-
-
-<step name="uat_gate" priority="blocker">
-**UAT gate (added in v3.1.0 after #443 / #448):**
-
-Before marking the phase complete, verify a passing VERIFICATION.md exists for this phase. Without it, the phase advances to `status: executed` (work done, awaiting verification) — not `status: complete`.
-
-```bash
-VERIFICATION_FILE=$(ls "${PHASE_DIR}"/*-VERIFICATION.md 2>/dev/null | head -1)
-
-if [ -z "$VERIFICATION_FILE" ]; then
-  VERIFICATION_STATUS="missing"
-elif grep -qE "^status:[[:space:]]*passed" "$VERIFICATION_FILE" 2>/dev/null; then
-  VERIFICATION_STATUS="pass"
-elif grep -qE "^status:[[:space:]]*(gaps_found|fail)" "$VERIFICATION_FILE" 2>/dev/null; then
-  VERIFICATION_STATUS="fail"
-else
-  VERIFICATION_STATUS="indeterminate"
-fi
-```
-
-**If `VERIFICATION_STATUS` is `missing` or `indeterminate`:**
-
-1. Mark the phase as `status: executed` (NOT `complete`) via:
-   ```bash
-   node ".rihal/bin/rihal-tools.cjs" phase set-status "${PHASE_NUMBER}" executed
-   ```
-2. Print the mandatory UAT checklist:
-   ```
-   ⚠ Phase {X} EXECUTED but not yet verified.
-
-   The following acceptance criteria require human verification before
-   the phase can advance to `status: complete`:
-
-   {list AC items from SPRINT.md}
-
-   Recommended next steps:
-   /rihal-add-tests {X} — generate unit + E2E tests before UAT
-   /rihal-verify-work {X} — perform UAT and produce VERIFICATION.md
-
-   /rihal-next will refuse to advance until the UAT gate passes.
-   ```
-3. STOP the workflow. Do NOT proceed to `update_roadmap`. Do NOT call `phase complete`.
-
-**If `VERIFICATION_STATUS` is `fail`:**
-
-1. Mark the phase as `status: executed` (so /rihal-plan --gaps can run a closure cycle).
-2. Surface the failed AC items.
-3. STOP. Don't mark complete on a failing verification.
-
-**Only when `VERIFICATION_STATUS` is `pass`** — proceed to `update_roadmap` below.
-
-The previous behaviour (printing "Next Up: /rihal-verify-work" without state-gating) caused phases to reach `status: complete` without any human-verified UAT — see #443 for the failure mode.
-</step>
-
-<step name="update_roadmap">
-**Mark phase complete and update all tracking files:**
-
-```bash
-COMPLETION=$(node ".rihal/bin/rihal-tools.cjs" phase complete "${PHASE_NUMBER}")
-```
-
-Record execution telemetry (plan count + latest commit hash):
-```bash
-EXEC_HASH=$(git rev-parse --short HEAD 2>/dev/null || echo "")
-node ".rihal/bin/rihal-tools.cjs" state record-execution \
-  --plan "${PHASE_NUMBER}" \
-  --tasks "${PLAN_COUNT}" \
-  --hash "${EXEC_HASH}" \
-  2>/dev/null || true
-```
-
-The CLI handles:
-- Marking phase checkbox `[x]` with completion date
-- Updating Progress table (Status → Complete, date)
-- Updating plan count to final
-- Advancing STATE.md to next phase
-- Updating REQUIREMENTS.md traceability
-- Scanning for verification debt (returns `warnings` array)
-
-Extract from result: `next_phase`, `next_phase_name`, `is_last_phase`, `warnings`, `has_warnings`.
-
-**If has_warnings is true:**
-```
-## Phase {X} marked complete with {N} warnings:
-
-{list each warning}
-
-These items are tracked and will appear in `/rihal-progress` and `/rihal-audit-uat`.
-```
-
-```bash
-node ".rihal/bin/rihal-tools.cjs" commit "docs(phase-{X}): complete phase execution" --files .planning/ROADMAP.md .planning/STATE.md .planning/REQUIREMENTS.md {phase_dir}/*-VERIFICATION.md
-```
-</step>
-
-<step name="auto_copy_learnings">
-**Auto-copy phase learnings to global store (when enabled).**
-
-This step runs AFTER phase completion and SUMMARY.md is written. It copies any LEARNINGS.md
-entries from the completed phase to the global learnings store at `.rihal/knowledge/`.
-
-**Check config gate:**
-```bash
-GL_ENABLED=$(node ".rihal/bin/rihal-tools.cjs" config-get features.global_learnings --raw 2>/dev/null || echo "false")
-```
-
-**If `GL_ENABLED` is not `true`:** Skip this step entirely (feature disabled by default).
-
-**If enabled:**
-
-1. Check if LEARNINGS.md exists in the phase directory (use the `phase_dir` value from init context)
-2. If found, copy to global store:
-```bash
-node ".rihal/bin/rihal-tools.cjs" learnings copy 2>/dev/null || echo "⚠ Learnings copy failed — continuing"
-```
-Copy failure must NOT block phase completion.
-</step>
-
-<step name="update_project_md">
-**Evolve PROJECT.md to reflect phase completion (prevents planning document drift — #956):**
-
-PROJECT.md tracks validated requirements, decisions, and current state. Without this step,
-PROJECT.md falls behind silently over multiple phases.
-
-1. Read `.planning/PROJECT.md`
-2. If the file exists and has a `## Validated Requirements` or `## Requirements` section:
-   - Move any requirements validated by this phase from Active → Validated
-   - Add a brief note: `Validated in Phase {X}: {Name}`
-3. If the file has a `## Current State` or similar section:
-   - Update it to reflect this phase's completion (e.g., "Phase {X} complete — {one-liner}")
-4. Update the `Last updated:` footer to today's date
-5. Commit the change:
-
-```bash
-node ".rihal/bin/rihal-tools.cjs" commit "docs(phase-{X}): evolve PROJECT.md after phase completion" --files .planning/PROJECT.md
-```
-
-**Skip this step if** `.planning/PROJECT.md` does not exist.
-</step>
-
-<step name="notify_on_completion">
-**Post phase completion to configured webhooks (Slack / Discord / MS Teams).**
-
-Silent no-op if no webhook URLs are in `.rihal/config.yaml`. Failures are reported but never block the workflow.
-
-```bash
-node ".rihal/bin/rihal-tools.cjs" notify send \
-  --title "Phase ${phase_number} complete — ${phase_name}" \
-  --body "$(basename "$PWD") · $(git rev-parse --short HEAD) · ${incomplete_count:-0} plan(s) remaining" \
-  --event "execute-done" 2>/dev/null || true
-```
-
-Users configure webhooks by editing `.rihal/config.yaml`:
-
-```yaml
-slack_webhook_url: "https://hooks.slack.com/services/..."
-discord_webhook_url: "https://discord.com/api/webhooks/..."
-teams_webhook_url: "https://outlook.office.com/webhook/..."
-```
-
-Then verify with `/rihal-notify-test`.
-</step>
-
-<step name="generate_tests">
-**Offer test generation for the completed phase.**
-
-After verification passes and the roadmap is updated, check whether tests were already written as part of the phase plans:
-
-```bash
-TEST_FILES=$(find "${PHASE_DIR}" -name "*test*" -o -name "*spec*" 2>/dev/null | wc -l)
-```
-
-If `TEST_FILES` is 0 — no test artifacts were produced during execution. Present the test generation offer:
-
-```
-## ✓ Phase {X}: {Name} — Add Tests?
-
-No test files were generated during this phase.
-Run /rihal-add-tests to generate unit + E2E tests from the SUMMARY:
-
-/rihal-add-tests {X} ${Rihal_WS}
-
-Skip if tests are out of scope for this phase (infra, config, docs-only).
-```
-
-If `TEST_FILES` is > 0 — tests were written inline. Skip this step silently.
-
-**This step is advisory only — it never blocks phase completion.**
-</step>
-
-<step name="offer_next">
-
-**Exception:** If `gaps_found`, the `verify_phase_goal` step already presents the gap-closure path (`/rihal-plan {X} --gaps`). No additional routing needed — skip auto-advance.
-
-**No-transition check (spawned by auto-advance chain):**
-
-Parse `--no-transition` flag from $ARGUMENTS.
-
-**If `--no-transition` flag present:**
-
-Execute-phase was spawned by plan's auto-advance. Do NOT run transition.md.
-After verification passes and roadmap is updated, return completion status to parent:
-
-```
-## PHASE COMPLETE
-
-Phase: ${PHASE_NUMBER} - ${PHASE_NAME}
-Plans: ${completed_count}/${total_count}
-Verification: {Passed | Gaps Found}
-
-[Include aggregate_results output]
-```
-
-STOP. Do not proceed to auto-advance or transition.
-
-**If `--no-transition` flag is NOT present:**
-
-**Auto-advance detection:**
-
-1. Parse `--auto` flag from $ARGUMENTS
-2. Read both the chain flag and user preference (chain flag already synced in init step):
-   ```bash
-   AUTO_CHAIN=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow._auto_chain_active 2>/dev/null || echo "false")
-   AUTO_CFG=$(node ".rihal/bin/rihal-tools.cjs" config-get workflow.auto_advance 2>/dev/null || echo "false")
-   ```
-
-**If `--auto` flag present OR `AUTO_CHAIN` is true OR `AUTO_CFG` is true (AND verification passed with no gaps):**
-
-```
-╔══════════════════════════════════════════╗
-║  AUTO-ADVANCING → TRANSITION             ║
-║  Phase {X} verified, continuing chain    ║
-╚══════════════════════════════════════════╝
-```
-
-Execute the transition workflow inline (do NOT use Task — orchestrator context is ~10-15%, transition needs phase completion data already in context):
-
-Read and follow `.rihal/workflows/transition.md`, passing through the `--auto` flag so it propagates to the next phase invocation.
-
-**If none of `--auto`, `AUTO_CHAIN`, or `AUTO_CFG` is true:**
-
-**STOP. Do not auto-advance. Do not execute transition. Do not plan next phase. Present options to the user and wait.**
-
-**IMPORTANT: There is NO `/rihal-transition` command. Never suggest it. The transition workflow is internal only.**
-
-```
-## ✓ Phase {X}: {Name} Complete
-
-/rihal-add-tests {X} ${Rihal_WS} — generate unit + E2E tests for this phase
-/rihal-progress ${Rihal_WS} — see updated roadmap
-/rihal-discuss-phase {next} ${Rihal_WS} — discuss next phase before planning
-/rihal-plan {next} ${Rihal_WS} — plan next phase
-/rihal-execute {next} ${Rihal_WS} — execute next phase
-```
-
-Only suggest the commands listed above. Do not invent or hallucinate command names.
-</step>
-
-</process>
-
-<context_efficiency>
-Orchestrator: ~10-15% context for 200k windows, can use more for 1M+ windows.
-Subagents: fresh context each (200k-1M depending on model). No polling (Task blocks). No context bleed.
-
-For 1M+ context models, consider:
-- Passing richer context (code snippets, dependency outputs) directly to executors instead of just file paths
-- Running small phases (≤3 plans, no dependencies) inline without subagent spawning overhead
-- Relaxing /clear recommendations — context rot onset is much further out with 5x window
-</context_efficiency>
-
-<failure_handling>
-- **classifyHandoffIfNeeded false failure:** Agent reports "failed" but error is `classifyHandoffIfNeeded is not defined` → Claude Code bug, not Rihal. Spot-check (SUMMARY exists, commits present) → if pass, treat as success
-- **Agent fails mid-plan:** Missing SUMMARY.md → report, ask user how to proceed
-- **Dependency chain breaks:** Wave 1 fails → Wave 2 dependents likely fail → user chooses attempt or skip
-- **All agents in wave fail:** Systemic issue → stop, report for investigation
-- **Checkpoint unresolvable:** "Skip this plan?" or "Abort phase execution?" → record partial progress in STATE.md
-</failure_handling>
-
-<resumption>
-Re-run `/rihal-execute {phase}` → discover_plans finds completed SUMMARYs → skips them → resumes from first incomplete plan → continues wave execution.
-
-STATE.md tracks: last completed plan, current wave, pending checkpoints.
-</resumption>