@gtkx/ffi 0.9.4 → 0.10.1

package/dist/generated/gio/dtls-connection.d.ts

@@ -315,4 +315,182 @@ export declare class DtlsConnection extends NativeObject {
      * @param result - a #GAsyncResult
      */
     shutdownFinish(result: AsyncResult): boolean;
+    /**
+     * Checks on the readiness of `datagram_based` to perform operations. The
+     * operations specified in `condition` are checked for and masked against the
+     * currently-satisfied conditions on `datagram_based`. The result is returned.
+     *
+     * %G_IO_IN will be set in the return value if data is available to read with
+     * g_datagram_based_receive_messages(), or if the connection is closed remotely
+     * (EOS); and if the datagram_based has not been closed locally using some
+     * implementation-specific method (such as g_socket_close() or
+     * g_socket_shutdown() with `shutdown_read` set, if it’s a #GSocket).
+     *
+     * If the connection is shut down or closed (by calling g_socket_close() or
+     * g_socket_shutdown() with `shutdown_read` set, if it’s a #GSocket, for
+     * example), all calls to this function will return %G_IO_ERROR_CLOSED.
+     *
+     * %G_IO_OUT will be set if it is expected that at least one byte can be sent
+     * using g_datagram_based_send_messages() without blocking. It will not be set
+     * if the datagram_based has been closed locally.
+     *
+     * %G_IO_HUP will be set if the connection has been closed locally.
+     *
+     * %G_IO_ERR will be set if there was an asynchronous error in transmitting data
+     * previously enqueued using g_datagram_based_send_messages().
+     *
+     * Note that on Windows, it is possible for an operation to return
+     * %G_IO_ERROR_WOULD_BLOCK even immediately after
+     * g_datagram_based_condition_check() has claimed that the #GDatagramBased is
+     * ready for writing. Rather than calling g_datagram_based_condition_check() and
+     * then writing to the #GDatagramBased if it succeeds, it is generally better to
+     * simply try writing right away, and try again later if the initial attempt
+     * returns %G_IO_ERROR_WOULD_BLOCK.
+     *
+     * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in `condition`; these
+     * conditions will always be set in the output if they are true. Apart from
+     * these flags, the output is guaranteed to be masked by `condition`.
+     *
+     * This call never blocks.
+     * @param condition - a #GIOCondition mask to check
+     */
+    conditionCheck(condition: GLib.IOCondition): GLib.IOCondition;
+    /**
+     * Waits for up to `timeout` microseconds for condition to become true on
+     * `datagram_based`. If the condition is met, %TRUE is returned.
+     *
+     * If `cancellable` is cancelled before the condition is met, or if `timeout` is
+     * reached before the condition is met, then %FALSE is returned and `error` is
+     * set appropriately (%G_IO_ERROR_CANCELLED or %G_IO_ERROR_TIMED_OUT).
+     * @param condition - a #GIOCondition mask to wait for
+     * @param timeout - the maximum time (in microseconds) to wait, 0 to not block, or -1
+     * @param cancellable - a #GCancellable
+     */
+    conditionWait(condition: GLib.IOCondition, timeout: number, cancellable?: Cancellable): boolean;
+    /**
+     * Creates a #GSource that can be attached to a #GMainContext to monitor for
+     * the availability of the specified `condition` on the #GDatagramBased. The
+     * #GSource keeps a reference to the `datagram_based`.
+     *
+     * The callback on the source is of the #GDatagramBasedSourceFunc type.
+     *
+     * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in `condition`; these
+     * conditions will always be reported in the callback if they are true.
+     *
+     * If non-%NULL, `cancellable` can be used to cancel the source, which will
+     * cause the source to trigger, reporting the current condition (which is
+     * likely 0 unless cancellation happened at the same time as a condition
+     * change). You can check for this in the callback using
+     * g_cancellable_is_cancelled().
+     * @param condition - a #GIOCondition mask to monitor
+     * @param cancellable - a #GCancellable
+     */
+    createSource(condition: GLib.IOCondition, cancellable?: Cancellable): GLib.Source;
+    /**
+     * Receive one or more data messages from `datagram_based` in one go.
+     *
+     * `messages` must point to an array of #GInputMessage structs and
+     * `num_messages` must be the length of this array. Each #GInputMessage
+     * contains a pointer to an array of #GInputVector structs describing the
+     * buffers that the data received in each message will be written to.
+     *
+     * `flags` modify how all messages are received. The commonly available
+     * arguments for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too. These
+     * flags affect the overall receive operation. Flags affecting individual
+     * messages are returned in #GInputMessage.flags.
+     *
+     * The other members of #GInputMessage are treated as described in its
+     * documentation.
+     *
+     * If `timeout` is negative the call will block until `num_messages` have been
+     * received, the connection is closed remotely (EOS), `cancellable` is cancelled,
+     * or an error occurs.
+     *
+     * If `timeout` is 0 the call will return up to `num_messages` without blocking,
+     * or %G_IO_ERROR_WOULD_BLOCK if no messages are queued in the operating system
+     * to be received.
+     *
+     * If `timeout` is positive the call will block on the same conditions as if
+     * `timeout` were negative. If the timeout is reached
+     * before any messages are received, %G_IO_ERROR_TIMED_OUT is returned,
+     * otherwise it will return the number of messages received before timing out.
+     * (Note: This is effectively the behaviour of `MSG_WAITFORONE` with
+     * recvmmsg().)
+     *
+     * To be notified when messages are available, wait for the %G_IO_IN condition.
+     * Note though that you may still receive %G_IO_ERROR_WOULD_BLOCK from
+     * g_datagram_based_receive_messages() even if you were previously notified of a
+     * %G_IO_IN condition.
+     *
+     * If the remote peer closes the connection, any messages queued in the
+     * underlying receive buffer will be returned, and subsequent calls to
+     * g_datagram_based_receive_messages() will return 0 (with no error set).
+     *
+     * If the connection is shut down or closed (by calling g_socket_close() or
+     * g_socket_shutdown() with `shutdown_read` set, if it’s a #GSocket, for
+     * example), all calls to this function will return %G_IO_ERROR_CLOSED.
+     *
+     * On error -1 is returned and `error` is set accordingly. An error will only
+     * be returned if zero messages could be received; otherwise the number of
+     * messages successfully received before the error will be returned. If
+     * `cancellable` is cancelled, %G_IO_ERROR_CANCELLED is returned as with any
+     * other error.
+     * @param messages - an array of #GInputMessage structs
+     * @param numMessages - the number of elements in `messages`
+     * @param flags - an int containing #GSocketMsgFlags flags for the overall operation
+     * @param timeout - the maximum time (in microseconds) to wait, 0 to not block, or -1
+     * @param cancellable - a %GCancellable
+     */
+    receiveMessages(messages: number[], numMessages: number, flags: number, timeout: number, cancellable?: Cancellable): number;
+    /**
+     * Send one or more data messages from `datagram_based` in one go.
+     *
+     * `messages` must point to an array of #GOutputMessage structs and
+     * `num_messages` must be the length of this array. Each #GOutputMessage
+     * contains an address to send the data to, and a pointer to an array of
+     * #GOutputVector structs to describe the buffers that the data to be sent
+     * for each message will be gathered from.
+     *
+     * `flags` modify how the message is sent. The commonly available arguments
+     * for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too.
+     *
+     * The other members of #GOutputMessage are treated as described in its
+     * documentation.
+     *
+     * If `timeout` is negative the call will block until `num_messages` have been
+     * sent, `cancellable` is cancelled, or an error occurs.
+     *
+     * If `timeout` is 0 the call will send up to `num_messages` without blocking,
+     * or will return %G_IO_ERROR_WOULD_BLOCK if there is no space to send messages.
+     *
+     * If `timeout` is positive the call will block on the same conditions as if
+     * `timeout` were negative. If the timeout is reached before any messages are
+     * sent, %G_IO_ERROR_TIMED_OUT is returned, otherwise it will return the number
+     * of messages sent before timing out.
+     *
+     * To be notified when messages can be sent, wait for the %G_IO_OUT condition.
+     * Note though that you may still receive %G_IO_ERROR_WOULD_BLOCK from
+     * g_datagram_based_send_messages() even if you were previously notified of a
+     * %G_IO_OUT condition. (On Windows in particular, this is very common due to
+     * the way the underlying APIs work.)
+     *
+     * If the connection is shut down or closed (by calling g_socket_close() or
+     * g_socket_shutdown() with `shutdown_write` set, if it’s a #GSocket, for
+     * example), all calls to this function will return %G_IO_ERROR_CLOSED.
+     *
+     * On error -1 is returned and `error` is set accordingly. An error will only
+     * be returned if zero messages could be sent; otherwise the number of messages
+     * successfully sent before the error will be returned. If `cancellable` is
+     * cancelled, %G_IO_ERROR_CANCELLED is returned as with any other error.
+     * @param messages - an array of #GOutputMessage structs
+     * @param numMessages - the number of elements in `messages`
+     * @param flags - an int containing #GSocketMsgFlags flags
+     * @param timeout - the maximum time (in microseconds) to wait, 0 to not block, or -1
+     * @param cancellable - a %GCancellable
+     */
+    sendMessages(messages: number[], numMessages: number, flags: number, timeout: number, cancellable?: Cancellable): number;
 }

package/dist/generated/gio/dtls-connection.js

@@ -2,6 +2,7 @@ import { call } from "../../batch.js";
 import { NativeError } from "../../native/error.js";
 import { getNativeObject } from "../../native/object.js";
 import { NativeObject } from "../../native/base.js";
+import * as GLib from "../glib/index.js";
 /**
  * `GDtlsConnection` is the base DTLS connection class type, which wraps
  * a {@link Gio.DatagramBased} and provides DTLS encryption on top of it. Its
@@ -688,4 +689,346 @@ export class DtlsConnection extends NativeObject {
         }
         return _result;
     }
+    /**
+     * Checks on the readiness of `datagram_based` to perform operations. The
+     * operations specified in `condition` are checked for and masked against the
+     * currently-satisfied conditions on `datagram_based`. The result is returned.
+     *
+     * %G_IO_IN will be set in the return value if data is available to read with
+     * g_datagram_based_receive_messages(), or if the connection is closed remotely
+     * (EOS); and if the datagram_based has not been closed locally using some
+     * implementation-specific method (such as g_socket_close() or
+     * g_socket_shutdown() with `shutdown_read` set, if it’s a #GSocket).
+     *
+     * If the connection is shut down or closed (by calling g_socket_close() or
+     * g_socket_shutdown() with `shutdown_read` set, if it’s a #GSocket, for
+     * example), all calls to this function will return %G_IO_ERROR_CLOSED.
+     *
+     * %G_IO_OUT will be set if it is expected that at least one byte can be sent
+     * using g_datagram_based_send_messages() without blocking. It will not be set
+     * if the datagram_based has been closed locally.
+     *
+     * %G_IO_HUP will be set if the connection has been closed locally.
+     *
+     * %G_IO_ERR will be set if there was an asynchronous error in transmitting data
+     * previously enqueued using g_datagram_based_send_messages().
+     *
+     * Note that on Windows, it is possible for an operation to return
+     * %G_IO_ERROR_WOULD_BLOCK even immediately after
+     * g_datagram_based_condition_check() has claimed that the #GDatagramBased is
+     * ready for writing. Rather than calling g_datagram_based_condition_check() and
+     * then writing to the #GDatagramBased if it succeeds, it is generally better to
+     * simply try writing right away, and try again later if the initial attempt
+     * returns %G_IO_ERROR_WOULD_BLOCK.
+     *
+     * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in `condition`; these
+     * conditions will always be set in the output if they are true. Apart from
+     * these flags, the output is guaranteed to be masked by `condition`.
+     *
+     * This call never blocks.
+     * @param condition - a #GIOCondition mask to check
+     */
+    conditionCheck(condition) {
+        return call("libgio-2.0.so.0", "g_datagram_based_condition_check", [
+            {
+                type: { type: "gobject" },
+                value: this.id,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: false },
+                value: condition,
+            },
+        ], { type: "int", size: 32, unsigned: false });
+    }
+    /**
+     * Waits for up to `timeout` microseconds for condition to become true on
+     * `datagram_based`. If the condition is met, %TRUE is returned.
+     *
+     * If `cancellable` is cancelled before the condition is met, or if `timeout` is
+     * reached before the condition is met, then %FALSE is returned and `error` is
+     * set appropriately (%G_IO_ERROR_CANCELLED or %G_IO_ERROR_TIMED_OUT).
+     * @param condition - a #GIOCondition mask to wait for
+     * @param timeout - the maximum time (in microseconds) to wait, 0 to not block, or -1
+     * @param cancellable - a #GCancellable
+     */
+    conditionWait(condition, timeout, cancellable) {
+        const error = { value: null };
+        const result = call("libgio-2.0.so.0", "g_datagram_based_condition_wait", [
+            {
+                type: { type: "gobject" },
+                value: this.id,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: false },
+                value: condition,
+            },
+            {
+                type: { type: "int", size: 64, unsigned: false },
+                value: timeout,
+            },
+            {
+                type: { type: "gobject", borrowed: true },
+                value: cancellable?.id ?? cancellable,
+                optional: true,
+            },
+            {
+                type: {
+                    type: "ref",
+                    innerType: {
+                        type: "boxed",
+                        innerType: "GError",
+                        lib: "libglib-2.0.so.0",
+                    },
+                },
+                value: error,
+            },
+        ], { type: "boolean" });
+        if (error.value !== null) {
+            throw new NativeError(error.value);
+        }
+        return result;
+    }
+    /**
+     * Creates a #GSource that can be attached to a #GMainContext to monitor for
+     * the availability of the specified `condition` on the #GDatagramBased. The
+     * #GSource keeps a reference to the `datagram_based`.
+     *
+     * The callback on the source is of the #GDatagramBasedSourceFunc type.
+     *
+     * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in `condition`; these
+     * conditions will always be reported in the callback if they are true.
+     *
+     * If non-%NULL, `cancellable` can be used to cancel the source, which will
+     * cause the source to trigger, reporting the current condition (which is
+     * likely 0 unless cancellation happened at the same time as a condition
+     * change). You can check for this in the callback using
+     * g_cancellable_is_cancelled().
+     * @param condition - a #GIOCondition mask to monitor
+     * @param cancellable - a #GCancellable
+     */
+    createSource(condition, cancellable) {
+        const ptr = call("libgio-2.0.so.0", "g_datagram_based_create_source", [
+            {
+                type: { type: "gobject" },
+                value: this.id,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: false },
+                value: condition,
+            },
+            {
+                type: { type: "gobject", borrowed: true },
+                value: cancellable?.id ?? cancellable,
+                optional: true,
+            },
+        ], {
+            type: "boxed",
+            borrowed: true,
+            innerType: "GSource",
+            lib: "libgobject-2.0.so.0,libglib-2.0.so.0",
+            getTypeFn: "g_source_get_type",
+        });
+        return getNativeObject(ptr, GLib.Source);
+    }
+    /**
+     * Receive one or more data messages from `datagram_based` in one go.
+     *
+     * `messages` must point to an array of #GInputMessage structs and
+     * `num_messages` must be the length of this array. Each #GInputMessage
+     * contains a pointer to an array of #GInputVector structs describing the
+     * buffers that the data received in each message will be written to.
+     *
+     * `flags` modify how all messages are received. The commonly available
+     * arguments for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too. These
+     * flags affect the overall receive operation. Flags affecting individual
+     * messages are returned in #GInputMessage.flags.
+     *
+     * The other members of #GInputMessage are treated as described in its
+     * documentation.
+     *
+     * If `timeout` is negative the call will block until `num_messages` have been
+     * received, the connection is closed remotely (EOS), `cancellable` is cancelled,
+     * or an error occurs.
+     *
+     * If `timeout` is 0 the call will return up to `num_messages` without blocking,
+     * or %G_IO_ERROR_WOULD_BLOCK if no messages are queued in the operating system
+     * to be received.
+     *
+     * If `timeout` is positive the call will block on the same conditions as if
+     * `timeout` were negative. If the timeout is reached
+     * before any messages are received, %G_IO_ERROR_TIMED_OUT is returned,
+     * otherwise it will return the number of messages received before timing out.
+     * (Note: This is effectively the behaviour of `MSG_WAITFORONE` with
+     * recvmmsg().)
+     *
+     * To be notified when messages are available, wait for the %G_IO_IN condition.
+     * Note though that you may still receive %G_IO_ERROR_WOULD_BLOCK from
+     * g_datagram_based_receive_messages() even if you were previously notified of a
+     * %G_IO_IN condition.
+     *
+     * If the remote peer closes the connection, any messages queued in the
+     * underlying receive buffer will be returned, and subsequent calls to
+     * g_datagram_based_receive_messages() will return 0 (with no error set).
+     *
+     * If the connection is shut down or closed (by calling g_socket_close() or
+     * g_socket_shutdown() with `shutdown_read` set, if it’s a #GSocket, for
+     * example), all calls to this function will return %G_IO_ERROR_CLOSED.
+     *
+     * On error -1 is returned and `error` is set accordingly. An error will only
+     * be returned if zero messages could be received; otherwise the number of
+     * messages successfully received before the error will be returned. If
+     * `cancellable` is cancelled, %G_IO_ERROR_CANCELLED is returned as with any
+     * other error.
+     * @param messages - an array of #GInputMessage structs
+     * @param numMessages - the number of elements in `messages`
+     * @param flags - an int containing #GSocketMsgFlags flags for the overall operation
+     * @param timeout - the maximum time (in microseconds) to wait, 0 to not block, or -1
+     * @param cancellable - a %GCancellable
+     */
+    receiveMessages(messages, numMessages, flags, timeout, cancellable) {
+        const error = { value: null };
+        const result = call("libgio-2.0.so.0", "g_datagram_based_receive_messages", [
+            {
+                type: { type: "gobject" },
+                value: this.id,
+            },
+            {
+                type: {
+                    type: "array",
+                    itemType: { type: "int", size: 64, unsigned: true },
+                },
+                value: messages,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: true },
+                value: numMessages,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: false },
+                value: flags,
+            },
+            {
+                type: { type: "int", size: 64, unsigned: false },
+                value: timeout,
+            },
+            {
+                type: { type: "gobject", borrowed: true },
+                value: cancellable?.id ?? cancellable,
+                optional: true,
+            },
+            {
+                type: {
+                    type: "ref",
+                    innerType: {
+                        type: "boxed",
+                        innerType: "GError",
+                        lib: "libglib-2.0.so.0",
+                    },
+                },
+                value: error,
+            },
+        ], { type: "int", size: 32, unsigned: false });
+        if (error.value !== null) {
+            throw new NativeError(error.value);
+        }
+        return result;
+    }
+    /**
+     * Send one or more data messages from `datagram_based` in one go.
+     *
+     * `messages` must point to an array of #GOutputMessage structs and
+     * `num_messages` must be the length of this array. Each #GOutputMessage
+     * contains an address to send the data to, and a pointer to an array of
+     * #GOutputVector structs to describe the buffers that the data to be sent
+     * for each message will be gathered from.
+     *
+     * `flags` modify how the message is sent. The commonly available arguments
+     * for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too.
+     *
+     * The other members of #GOutputMessage are treated as described in its
+     * documentation.
+     *
+     * If `timeout` is negative the call will block until `num_messages` have been
+     * sent, `cancellable` is cancelled, or an error occurs.
+     *
+     * If `timeout` is 0 the call will send up to `num_messages` without blocking,
+     * or will return %G_IO_ERROR_WOULD_BLOCK if there is no space to send messages.
+     *
+     * If `timeout` is positive the call will block on the same conditions as if
+     * `timeout` were negative. If the timeout is reached before any messages are
+     * sent, %G_IO_ERROR_TIMED_OUT is returned, otherwise it will return the number
+     * of messages sent before timing out.
+     *
+     * To be notified when messages can be sent, wait for the %G_IO_OUT condition.
+     * Note though that you may still receive %G_IO_ERROR_WOULD_BLOCK from
+     * g_datagram_based_send_messages() even if you were previously notified of a
+     * %G_IO_OUT condition. (On Windows in particular, this is very common due to
+     * the way the underlying APIs work.)
+     *
+     * If the connection is shut down or closed (by calling g_socket_close() or
+     * g_socket_shutdown() with `shutdown_write` set, if it’s a #GSocket, for
+     * example), all calls to this function will return %G_IO_ERROR_CLOSED.
+     *
+     * On error -1 is returned and `error` is set accordingly. An error will only
+     * be returned if zero messages could be sent; otherwise the number of messages
+     * successfully sent before the error will be returned. If `cancellable` is
+     * cancelled, %G_IO_ERROR_CANCELLED is returned as with any other error.
+     * @param messages - an array of #GOutputMessage structs
+     * @param numMessages - the number of elements in `messages`
+     * @param flags - an int containing #GSocketMsgFlags flags
+     * @param timeout - the maximum time (in microseconds) to wait, 0 to not block, or -1
+     * @param cancellable - a %GCancellable
+     */
+    sendMessages(messages, numMessages, flags, timeout, cancellable) {
+        const error = { value: null };
+        const result = call("libgio-2.0.so.0", "g_datagram_based_send_messages", [
+            {
+                type: { type: "gobject" },
+                value: this.id,
+            },
+            {
+                type: {
+                    type: "array",
+                    itemType: { type: "int", size: 64, unsigned: true },
+                },
+                value: messages,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: true },
+                value: numMessages,
+            },
+            {
+                type: { type: "int", size: 32, unsigned: false },
+                value: flags,
+            },
+            {
+                type: { type: "int", size: 64, unsigned: false },
+                value: timeout,
+            },
+            {
+                type: { type: "gobject", borrowed: true },
+                value: cancellable?.id ?? cancellable,
+                optional: true,
+            },
+            {
+                type: {
+                    type: "ref",
+                    innerType: {
+                        type: "boxed",
+                        innerType: "GError",
+                        lib: "libglib-2.0.so.0",
+                    },
+                },
+                value: error,
+            },
+        ], { type: "int", size: 32, unsigned: false });
+        if (error.value !== null) {
+            throw new NativeError(error.value);
+        }
+        return result;
+    }
 }