@gtkx/ffi 0.8.0 → 0.9.1

package/dist/generated/gio/dbus-connection.d.ts

@@ -1,5 +1,5 @@
 import { Ref } from "@gtkx/native";
-import { DBusCallFlags, DBusCapabilityFlags, DBusConnectionFlags, DBusSendMessageFlags, DBusSignalFlags, DBusSubtreeFlags } from "./enums.js";
+import { DBusCallFlags, DBusCapabilityFlags, DBusConnectionFlags, DBusSendMessageFlags, DBusSubtreeFlags } from "./enums.js";
 import { DBusInterfaceInfo } from "./dbus-interface-info.js";
 import { ActionGroup } from "./action-group.js";
 import { AsyncResult } from "./async-result.js";
@@ -14,6 +14,7 @@ import * as GLib from "../glib/index.js";
 import * as GObject from "../gobject/index.js";
 export declare class DBusConnection extends GObject.GObject {
     static readonly glibTypeName: string;
+    static readonly objectType: "gobject";
     /**
      * Finishes an operation started with g_dbus_connection_new().
      * @param res - a #GAsyncResult obtained from the #GAsyncReadyCallback
@@ -46,7 +47,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param observer - a #GDBusAuthObserver or %NULL
      * @param cancellable - a #GCancellable or %NULL
      */
-    static connectionNewForAddressSync(address: string, flags: DBusConnectionFlags, observer?: DBusAuthObserver | null, cancellable?: Cancellable | null): DBusConnection;
+    static connectionNewForAddressSync(address: string, flags: DBusConnectionFlags, observer?: DBusAuthObserver, cancellable?: Cancellable): DBusConnection;
     /**
      * Synchronously sets up a D-Bus connection for exchanging D-Bus messages
      * with the end represented by @stream.
@@ -69,158 +70,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param observer - a #GDBusAuthObserver or %NULL
      * @param cancellable - a #GCancellable or %NULL
      */
-    static connectionNewSync(stream: IOStream, flags: DBusConnectionFlags, guid?: string | null, observer?: DBusAuthObserver | null, cancellable?: Cancellable | null): DBusConnection;
-    /**
-     * Asynchronously sets up a D-Bus connection for exchanging D-Bus messages
-     * with the end represented by @stream.
-     *
-     * If `stream` is a #GSocketConnection, then the corresponding #GSocket
-     * will be put into non-blocking mode.
-     *
-     * The D-Bus connection will interact with `stream` from a worker thread.
-     * As a result, the caller should not interact with `stream` after this
-     * method has been called, except by calling g_object_unref() on it.
-     *
-     * If `observer` is not %NULL it may be used to control the
-     * authentication process.
-     *
-     * When the operation is finished, `callback` will be invoked. You can
-     * then call g_dbus_connection_new_finish() to get the result of the
-     * operation.
-     *
-     * This is an asynchronous failable constructor. See
-     * g_dbus_connection_new_sync() for the synchronous
-     * version.
-     * @param stream - a #GIOStream
-     * @param guid - the GUID to use if authenticating as a server or %NULL
-     * @param flags - flags describing how to make the connection
-     * @param observer - a #GDBusAuthObserver or %NULL
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the request is satisfied
-     * @param userData - the data to pass to @callback
-     */
-    static _new(stream: IOStream, flags: DBusConnectionFlags, guid?: string | null, observer?: DBusAuthObserver | null, cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
-    /**
-     * Asynchronously connects and sets up a D-Bus client connection for
-     * exchanging D-Bus messages with an endpoint specified by `address` which must be in the
-     * D-Bus address format.
-     *
-     * This constructor can only be used to initiate client-side
-     * connections - use g_dbus_connection_new() if you need to act as the
-     * server. In particular, `flags` cannot contain the
-     * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_SERVER,
-     * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_ALLOW_ANONYMOUS or
-     * %G_DBUS_CONNECTION_FLAGS_AUTHENTICATION_REQUIRE_SAME_USER flags.
-     *
-     * When the operation is finished, `callback` will be invoked. You can
-     * then call g_dbus_connection_new_for_address_finish() to get the result of
-     * the operation.
-     *
-     * If `observer` is not %NULL it may be used to control the
-     * authentication process.
-     *
-     * This is an asynchronous failable constructor. See
-     * g_dbus_connection_new_for_address_sync() for the synchronous
-     * version.
-     * @param address - a D-Bus address
-     * @param flags - flags describing how to make the connection
-     * @param observer - a #GDBusAuthObserver or %NULL
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the request is satisfied
-     * @param userData - the data to pass to @callback
-     */
-    static newForAddress(address: string, flags: DBusConnectionFlags, observer?: DBusAuthObserver | null, cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
-    /**
-     * Adds a message filter. Filters are handlers that are run on all
-     * incoming and outgoing messages, prior to standard dispatch. Filters
-     * are run in the order that they were added.  The same handler can be
-     * added as a filter more than once, in which case it will be run more
-     * than once.  Filters added during a filter callback won't be run on
-     * the message being processed. Filter functions are allowed to modify
-     * and even drop messages.
-     *
-     * Note that filters are run in a dedicated message handling thread so
-     * they can't block and, generally, can't do anything but signal a
-     * worker thread. Also note that filters are rarely needed - use API
-     * such as g_dbus_connection_send_message_with_reply(),
-     * g_dbus_connection_signal_subscribe() or g_dbus_connection_call() instead.
-     *
-     * If a filter consumes an incoming message the message is not
-     * dispatched anywhere else - not even the standard dispatch machinery
-     * (that API such as g_dbus_connection_signal_subscribe() and
-     * g_dbus_connection_send_message_with_reply() relies on) will see the
-     * message. Similarly, if a filter consumes an outgoing message, the
-     * message will not be sent to the other peer.
-     *
-     * If `user_data_free_func` is non-%NULL, it will be called (in the
-     * thread-default main context of the thread you are calling this
-     * method from) at some point after `user_data` is no longer
-     * needed. (It is not guaranteed to be called synchronously when the
-     * filter is removed, and may be called after `connection` has been
-     * destroyed.)
-     * @param filterFunction - a filter function
-     * @param userData - user data to pass to @filter_function
-     * @param userDataFreeFunc - function to free `user_data` with when filter
-     */
-    addFilter(filterFunction: (...args: unknown[]) => unknown, userDataFreeFunc: () => void, userData?: number | null): number;
-    /**
-     * Asynchronously invokes the `method_name` method on the
-     * `interface_name` D-Bus interface on the remote object at
-     * `object_path` owned by @bus_name.
-     *
-     * If `connection` is closed then the operation will fail with
-     * %G_IO_ERROR_CLOSED. If `cancellable` is canceled, the operation will
-     * fail with %G_IO_ERROR_CANCELLED. If `parameters` contains a value
-     * not compatible with the D-Bus protocol, the operation fails with
-     * %G_IO_ERROR_INVALID_ARGUMENT.
-     *
-     * If `reply_type` is non-%NULL then the reply will be checked for having this type and an
-     * error will be raised if it does not match.  Said another way, if you give a `reply_type` then any non-%NULL return value will be of this type. Unless it’s
-     * %G_VARIANT_TYPE_UNIT, the `reply_type` will be a tuple containing one or more
-     * values.
-     *
-     * If the `parameters` #GVariant is floating, it is consumed. This allows
-     * convenient 'inline' use of g_variant_new(), e.g.:
-     * |[<!-- language="C" -->
-     * g_dbus_connection_call (connection,
-     * "org.freedesktop.StringThings",
-     * "/org/freedesktop/StringThings",
-     * "org.freedesktop.StringThings",
-     * "TwoStrings",
-     * g_variant_new ("(ss)",
-     * "Thing One",
-     * "Thing Two"),
-     * NULL,
-     * G_DBUS_CALL_FLAGS_NONE,
-     * -1,
-     * NULL,
-     * (GAsyncReadyCallback) two_strings_done,
-     * NULL);
-     * ]|
-     *
-     * This is an asynchronous method. When the operation is finished,
-     * `callback` will be invoked in the thread-default main context
-     * (see [method@GLib.MainContext.push_thread_default])
-     * of the thread you are calling this method from. You can then call
-     * g_dbus_connection_call_finish() to get the result of the operation.
-     * See g_dbus_connection_call_sync() for the synchronous version of this
-     * function.
-     *
-     * If `callback` is %NULL then the D-Bus method call message will be sent with
-     * the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
-     * @param busName - a unique or well-known bus name or %NULL if
-     * @param objectPath - path of remote object
-     * @param interfaceName - D-Bus interface to invoke method on
-     * @param methodName - the name of the method to invoke
-     * @param parameters - a #GVariant tuple with parameters for the method
-     * @param replyType - the expected type of the reply (which will be a
-     * @param flags - flags from the #GDBusCallFlags enumeration
-     * @param timeoutMsec - the timeout in milliseconds, -1 to use the default
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the request
-     * @param userData - the data to pass to @callback
-     */
-    call(objectPath: string, interfaceName: string, methodName: string, flags: DBusCallFlags, timeoutMsec: number, busName?: string | null, parameters?: GLib.Variant | null, replyType?: GLib.VariantType | null, cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
+    static connectionNewSync(stream: IOStream, flags: DBusConnectionFlags, guid?: string, observer?: DBusAuthObserver, cancellable?: Cancellable): DBusConnection;
     /**
      * Finishes an operation started with g_dbus_connection_call().
      * @param res - a #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_connection_call()
@@ -272,37 +122,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param timeoutMsec - the timeout in milliseconds, -1 to use the default
      * @param cancellable - a #GCancellable or %NULL
      */
-    callSync(objectPath: string, interfaceName: string, methodName: string, flags: DBusCallFlags, timeoutMsec: number, busName?: string | null, parameters?: GLib.Variant | null, replyType?: GLib.VariantType | null, cancellable?: Cancellable | null): GLib.Variant;
-    /**
-     * Like g_dbus_connection_call() but also takes a #GUnixFDList object.
-     *
-     * The file descriptors normally correspond to %G_VARIANT_TYPE_HANDLE
-     * values in the body of the message. For example, if a message contains
-     * two file descriptors, `fd_list` would have length 2, and
-     * `g_variant_new_handle (0)` and `g_variant_new_handle (1)` would appear
-     * somewhere in the body of the message (not necessarily in that order!)
-     * to represent the file descriptors at indexes 0 and 1 respectively.
-     *
-     * When designing D-Bus APIs that are intended to be interoperable,
-     * please note that non-GDBus implementations of D-Bus can usually only
-     * access file descriptors if they are referenced in this way by a
-     * value of type %G_VARIANT_TYPE_HANDLE in the body of the message.
-     *
-     * This method is only available on UNIX.
-     * @param busName - a unique or well-known bus name or %NULL if
-     * @param objectPath - path of remote object
-     * @param interfaceName - D-Bus interface to invoke method on
-     * @param methodName - the name of the method to invoke
-     * @param parameters - a #GVariant tuple with parameters for the method
-     * @param replyType - the expected type of the reply, or %NULL
-     * @param flags - flags from the #GDBusCallFlags enumeration
-     * @param timeoutMsec - the timeout in milliseconds, -1 to use the default
-     * @param fdList - a #GUnixFDList or %NULL
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the request is
-     * @param userData - The data to pass to @callback.
-     */
-    callWithUnixFdList(objectPath: string, interfaceName: string, methodName: string, flags: DBusCallFlags, timeoutMsec: number, busName?: string | null, parameters?: GLib.Variant | null, replyType?: GLib.VariantType | null, fdList?: UnixFDList | null, cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
+    callSync(objectPath: string, interfaceName: string, methodName: string, flags: DBusCallFlags, timeoutMsec: number, busName?: string, parameters?: GLib.Variant, replyType?: GLib.VariantType, cancellable?: Cancellable): GLib.Variant;
     /**
      * Finishes an operation started with g_dbus_connection_call_with_unix_fd_list().
      *
@@ -319,7 +139,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param outFdList - return location for a #GUnixFDList or %NULL
      * @param res - a #GAsyncResult obtained from the #GAsyncReadyCallback passed to
      */
-    callWithUnixFdListFinish(res: AsyncResult, outFdList?: Ref<UnixFDList> | null): GLib.Variant;
+    callWithUnixFdListFinish(res: AsyncResult, outFdList?: Ref<UnixFDList>): GLib.Variant;
     /**
      * Like g_dbus_connection_call_sync() but also takes and returns #GUnixFDList objects.
      * See g_dbus_connection_call_with_unix_fd_list() and
@@ -338,37 +158,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param outFdList - return location for a #GUnixFDList or %NULL
      * @param cancellable - a #GCancellable or %NULL
      */
-    callWithUnixFdListSync(objectPath: string, interfaceName: string, methodName: string, flags: DBusCallFlags, timeoutMsec: number, busName?: string | null, parameters?: GLib.Variant | null, replyType?: GLib.VariantType | null, fdList?: UnixFDList | null, outFdList?: Ref<UnixFDList> | null, cancellable?: Cancellable | null): GLib.Variant;
-    /**
-     * Closes @connection. Note that this never causes the process to
-     * exit (this might only happen if the other end of a shared message
-     * bus connection disconnects, see #GDBusConnection:exit-on-close).
-     *
-     * Once the connection is closed, operations such as sending a message
-     * will return with the error %G_IO_ERROR_CLOSED. Closing a connection
-     * will not automatically flush the connection so queued messages may
-     * be lost. Use g_dbus_connection_flush() if you need such guarantees.
-     *
-     * If `connection` is already closed, this method fails with
-     * %G_IO_ERROR_CLOSED.
-     *
-     * When `connection` has been closed, the #GDBusConnection::closed
-     * signal is emitted in the thread-default main context
-     * (see [method@GLib.MainContext.push_thread_default])
-     * of the thread that `connection` was constructed in.
-     *
-     * This is an asynchronous method. When the operation is finished,
-     * `callback` will be invoked in the thread-default main context
-     * (see [method@GLib.MainContext.push_thread_default])
-     * of the thread you are calling this method from. You can
-     * then call g_dbus_connection_close_finish() to get the result of the
-     * operation. See g_dbus_connection_close_sync() for the synchronous
-     * version.
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the request is
-     * @param userData - The data to pass to @callback
-     */
-    close(cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
+    callWithUnixFdListSync(objectPath: string, interfaceName: string, methodName: string, flags: DBusCallFlags, timeoutMsec: number, busName?: string, parameters?: GLib.Variant, replyType?: GLib.VariantType, fdList?: UnixFDList, outFdList?: Ref<UnixFDList>, cancellable?: Cancellable): GLib.Variant;
     /**
      * Finishes an operation started with g_dbus_connection_close().
      * @param res - a #GAsyncResult obtained from the #GAsyncReadyCallback passed
@@ -381,7 +171,7 @@ export declare class DBusConnection extends GObject.GObject {
      * does.
      * @param cancellable - a #GCancellable or %NULL
      */
-    closeSync(cancellable?: Cancellable | null): boolean;
+    closeSync(cancellable?: Cancellable): boolean;
     /**
      * Emits a signal.
      *
@@ -396,7 +186,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param signalName - the name of the signal to emit
      * @param parameters - a #GVariant tuple with parameters for the signal
      */
-    emitSignal(objectPath: string, interfaceName: string, signalName: string, destinationBusName?: string | null, parameters?: GLib.Variant | null): boolean;
+    emitSignal(objectPath: string, interfaceName: string, signalName: string, destinationBusName?: string, parameters?: GLib.Variant): boolean;
     /**
      * Exports `action_group` on `connection` at @object_path.
      *
@@ -444,26 +234,6 @@ export declare class DBusConnection extends GObject.GObject {
      * @param menu - a #GMenuModel
      */
     exportMenuModel(objectPath: string, menu: MenuModel): number;
-    /**
-     * Asynchronously flushes @connection, that is, writes all queued
-     * outgoing messages to the transport and then flushes the transport
-     * (using g_output_stream_flush_async()). This is useful in programs
-     * that want to emit a D-Bus signal and then exit immediately. Without
-     * flushing the connection, there is no guarantee that the message has
-     * been sent to the networking buffers in the OS kernel.
-     *
-     * This is an asynchronous method. When the operation is finished,
-     * `callback` will be invoked in the thread-default main context
-     * (see [method@GLib.MainContext.push_thread_default])
-     * of the thread you are calling this method from. You can
-     * then call g_dbus_connection_flush_finish() to get the result of the
-     * operation. See g_dbus_connection_flush_sync() for the synchronous
-     * version.
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the
-     * @param userData - The data to pass to @callback
-     */
-    flush(cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
     /**
      * Finishes an operation started with g_dbus_connection_flush().
      * @param res - a #GAsyncResult obtained from the #GAsyncReadyCallback passed
@@ -476,7 +246,7 @@ export declare class DBusConnection extends GObject.GObject {
      * does.
      * @param cancellable - a #GCancellable or %NULL
      */
-    flushSync(cancellable?: Cancellable | null): boolean;
+    flushSync(cancellable?: Cancellable): boolean;
     /**
      * Gets the capabilities negotiated with the remote peer
      */
@@ -580,7 +350,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param userData - data to pass to functions in @vtable
      * @param userDataFreeFunc - function to call when the object path is unregistered
      */
-    registerObject(objectPath: string, interfaceInfo: DBusInterfaceInfo, userDataFreeFunc: () => void, vtable?: number | null, userData?: number | null): number;
+    registerObject(objectPath: string, interfaceInfo: DBusInterfaceInfo, userDataFreeFunc: () => void, vtable?: number, userData?: number): number;
     /**
      * Version of g_dbus_connection_register_object() using closures instead of a
      * #GDBusInterfaceVTable for easier binding in other languages.
@@ -595,7 +365,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param getPropertyClosure - #GClosure for getting a property.
      * @param setPropertyClosure - #GClosure for setting a property.
      */
-    registerObjectWithClosures(objectPath: string, interfaceInfo: DBusInterfaceInfo, methodCallClosure?: GObject.Closure | null, getPropertyClosure?: GObject.Closure | null, setPropertyClosure?: GObject.Closure | null): number;
+    registerObjectWithClosures(objectPath: string, interfaceInfo: DBusInterfaceInfo, methodCallClosure?: GObject.Closure, getPropertyClosure?: GObject.Closure, setPropertyClosure?: GObject.Closure): number;
     /**
      * Version of [method@Gio.DBusConnection.register_object] using closures instead
      * of a [type@Gio.DBusInterfaceVTable] for easier binding in other languages.
@@ -615,7 +385,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param getPropertyClosure - [type@GObject.Closure] for getting a property.
      * @param setPropertyClosure - [type@GObject.Closure] for setting a property.
      */
-    registerObjectWithClosures2(objectPath: string, interfaceInfo: DBusInterfaceInfo, methodCallClosure?: GObject.Closure | null, getPropertyClosure?: GObject.Closure | null, setPropertyClosure?: GObject.Closure | null): number;
+    registerObjectWithClosures2(objectPath: string, interfaceInfo: DBusInterfaceInfo, methodCallClosure?: GObject.Closure, getPropertyClosure?: GObject.Closure, setPropertyClosure?: GObject.Closure): number;
     /**
      * Registers a whole subtree of dynamic objects.
      *
@@ -657,7 +427,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param userData - data to pass to functions in @vtable
      * @param userDataFreeFunc - function to call when the subtree is unregistered
      */
-    registerSubtree(objectPath: string, vtable: number, flags: DBusSubtreeFlags, userDataFreeFunc: () => void, userData?: number | null): number;
+    registerSubtree(objectPath: string, vtable: number, flags: DBusSubtreeFlags, userDataFreeFunc: () => void, userData?: number): number;
     /**
      * Removes a filter.
      *
@@ -697,46 +467,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param flags - flags affecting how the message is sent
      * @param outSerial - return location for serial number assigned
      */
-    sendMessage(message: DBusMessage, flags: DBusSendMessageFlags, outSerial?: Ref<number> | null): boolean;
-    /**
-     * Asynchronously sends `message` to the peer represented by @connection.
-     *
-     * Unless `flags` contain the
-     * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag, the serial number
-     * will be assigned by `connection` and set on `message` via
-     * g_dbus_message_set_serial(). If `out_serial` is not %NULL, then the
-     * serial number used will be written to this location prior to
-     * submitting the message to the underlying transport. While it has a `volatile`
-     * qualifier, this is a historical artifact and the argument passed to it should
-     * not be `volatile`.
-     *
-     * If `connection` is closed then the operation will fail with
-     * %G_IO_ERROR_CLOSED. If `cancellable` is canceled, the operation will
-     * fail with %G_IO_ERROR_CANCELLED. If `message` is not well-formed,
-     * the operation fails with %G_IO_ERROR_INVALID_ARGUMENT.
-     *
-     * This is an asynchronous method. When the operation is finished, `callback` will be invoked in the thread-default main context
-     * (see [method@GLib.MainContext.push_thread_default])
-     * of the thread you are calling this method from. You can then call
-     * g_dbus_connection_send_message_with_reply_finish() to get the result of the operation.
-     * See g_dbus_connection_send_message_with_reply_sync() for the synchronous version.
-     *
-     * Note that `message` must be unlocked, unless `flags` contain the
-     * %G_DBUS_SEND_MESSAGE_FLAGS_PRESERVE_SERIAL flag.
-     *
-     * See this [server][class@Gio.DBusConnection#an-example-d-bus-server]
-     * and [client][class@Gio.DBusConnection#an-example-for-file-descriptor-passing]
-     * for an example of how to use this low-level API to send and receive
-     * UNIX file descriptors.
-     * @param message - a #GDBusMessage
-     * @param flags - flags affecting how the message is sent
-     * @param timeoutMsec - the timeout in milliseconds, -1 to use the default
-     * @param outSerial - return location for serial number assigned
-     * @param cancellable - a #GCancellable or %NULL
-     * @param callback - a #GAsyncReadyCallback to call when the request
-     * @param userData - The data to pass to @callback
-     */
-    sendMessageWithReply(message: DBusMessage, flags: DBusSendMessageFlags, timeoutMsec: number, outSerial?: Ref<number> | null, cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
+    sendMessage(message: DBusMessage, flags: DBusSendMessageFlags, outSerial?: Ref<number>): boolean;
     /**
      * Finishes an operation started with g_dbus_connection_send_message_with_reply().
      *
@@ -789,7 +520,7 @@ export declare class DBusConnection extends GObject.GObject {
      * @param outSerial - return location for serial number
      * @param cancellable - a #GCancellable or %NULL
      */
-    sendMessageWithReplySync(message: DBusMessage, flags: DBusSendMessageFlags, timeoutMsec: number, outSerial?: Ref<number> | null, cancellable?: Cancellable | null): DBusMessage;
+    sendMessageWithReplySync(message: DBusMessage, flags: DBusSendMessageFlags, timeoutMsec: number, outSerial?: Ref<number>, cancellable?: Cancellable): DBusMessage;
     /**
      * Sets whether the process should be terminated when `connection` is
      * closed by the remote peer. See #GDBusConnection:exit-on-close for
@@ -804,66 +535,6 @@ export declare class DBusConnection extends GObject.GObject {
      * @param exitOnClose - whether the process should be terminated
      */
     setExitOnClose(exitOnClose: boolean): void;
-    /**
-     * Subscribes to signals on `connection` and invokes `callback` whenever
-     * the signal is received. Note that `callback` will be invoked in the
-     * thread-default main context (see [method@GLib.MainContext.push_thread_default])
-     * of the thread you are calling this method from.
-     *
-     * If `connection` is not a message bus connection, `sender` must be
-     * %NULL.
-     *
-     * If `sender` is a well-known name note that `callback` is invoked with
-     * the unique name for the owner of @sender, not the well-known name
-     * as one would expect. This is because the message bus rewrites the
-     * name. As such, to avoid certain race conditions, users should be
-     * tracking the name owner of the well-known name and use that when
-     * processing the received signal.
-     *
-     * If one of %G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_NAMESPACE or
-     * %G_DBUS_SIGNAL_FLAGS_MATCH_ARG0_PATH are given, `arg0` is
-     * interpreted as part of a namespace or path.  The first argument
-     * of a signal is matched against that part as specified by D-Bus.
-     *
-     * If `user_data_free_func` is non-%NULL, it will be called (in the
-     * thread-default main context of the thread you are calling this
-     * method from) at some point after `user_data` is no longer
-     * needed. (It is not guaranteed to be called synchronously when the
-     * signal is unsubscribed from, and may be called after `connection` has been destroyed.)
-     *
-     * As `callback` is potentially invoked in a different thread from where it’s
-     * emitted, it’s possible for this to happen after
-     * g_dbus_connection_signal_unsubscribe() has been called in another thread.
-     * Due to this, `user_data` should have a strong reference which is freed with
-     * @user_data_free_func, rather than pointing to data whose lifecycle is tied
-     * to the signal subscription. For example, if a #GObject is used to store the
-     * subscription ID from g_dbus_connection_signal_subscribe(), a strong reference
-     * to that #GObject must be passed to @user_data, and g_object_unref() passed to
-     * @user_data_free_func. You are responsible for breaking the resulting
-     * reference count cycle by explicitly unsubscribing from the signal when
-     * dropping the last external reference to the #GObject. Alternatively, a weak
-     * reference may be used.
-     *
-     * It is guaranteed that if you unsubscribe from a signal using
-     * g_dbus_connection_signal_unsubscribe() from the same thread which made the
-     * corresponding g_dbus_connection_signal_subscribe() call, `callback` will not
-     * be invoked after g_dbus_connection_signal_unsubscribe() returns.
-     *
-     * The returned subscription identifier is an opaque value which is guaranteed
-     * to never be zero.
-     *
-     * This function can never fail.
-     * @param sender - sender name to match on (unique or well-known name)
-     * @param interfaceName - D-Bus interface name to match on or %NULL to
-     * @param member - D-Bus signal name to match on or %NULL to match on
-     * @param objectPath - object path to match on or %NULL to match on
-     * @param arg0 - contents of first string argument to match on or %NULL
-     * @param flags - #GDBusSignalFlags describing how arg0 is used in subscribing to the
-     * @param callback - callback to invoke when there is a signal matching the requested data
-     * @param userData - user data to pass to @callback
-     * @param userDataFreeFunc - function to free `user_data` with when
-     */
-    signalSubscribe(flags: DBusSignalFlags, callback: (...args: unknown[]) => unknown, sender?: string | null, interfaceName?: string | null, member?: string | null, objectPath?: string | null, arg0?: string | null, userData?: number | null, userDataFreeFunc?: () => void | null): number;
     /**
      * Unsubscribes from signals.
      *
@@ -917,49 +588,6 @@ export declare class DBusConnection extends GObject.GObject {
      * @param registrationId - a subtree registration id obtained from
      */
     unregisterSubtree(registrationId: number): boolean;
-    /**
-     * Starts asynchronous initialization of the object implementing the
-     * interface. This must be done before any real use of the object after
-     * initial construction. If the object also implements #GInitable you can
-     * optionally call g_initable_init() instead.
-     *
-     * This method is intended for language bindings. If writing in C,
-     * g_async_initable_new_async() should typically be used instead.
-     *
-     * When the initialization is finished, `callback` will be called. You can
-     * then call g_async_initable_init_finish() to get the result of the
-     * initialization.
-     *
-     * Implementations may also support cancellation. If `cancellable` is not
-     * %NULL, then initialization can be cancelled by triggering the cancellable
-     * object from another thread. If the operation was cancelled, the error
-     * %G_IO_ERROR_CANCELLED will be returned. If `cancellable` is not %NULL, and
-     * the object doesn't support cancellable initialization, the error
-     * %G_IO_ERROR_NOT_SUPPORTED will be returned.
-     *
-     * As with #GInitable, if the object is not initialized, or initialization
-     * returns with an error, then all operations on the object except
-     * g_object_ref() and g_object_unref() are considered to be invalid, and
-     * have undefined behaviour. They will often fail with g_critical() or
-     * g_warning(), but this must not be relied on.
-     *
-     * Callers should not assume that a class which implements #GAsyncInitable can
-     * be initialized multiple times; for more information, see g_initable_init().
-     * If a class explicitly supports being initialized multiple times,
-     * implementation requires yielding all subsequent calls to init_async() on the
-     * results of the first call.
-     *
-     * For classes that also support the #GInitable interface, the default
-     * implementation of this method will run the g_initable_init() function
-     * in a thread, so if you want to support asynchronous initialization via
-     * threads, just implement the #GAsyncInitable interface without overriding
-     * any interface methods.
-     * @param ioPriority - the I/O priority of the operation
-     * @param cancellable - optional #GCancellable object, %NULL to ignore.
-     * @param callback - a #GAsyncReadyCallback to call when the request is satisfied
-     * @param userData - the data to pass to callback function
-     */
-    initAsync(ioPriority: number, cancellable?: Cancellable | null, callback?: (...args: unknown[]) => unknown | null, userData?: number | null): void;
     /**
      * Finishes asynchronous initialization and returns the result.
      * See g_async_initable_init_async().
@@ -1013,7 +641,7 @@ export declare class DBusConnection extends GObject.GObject {
      * instance.
      * @param cancellable - optional #GCancellable object, %NULL to ignore.
      */
-    init(cancellable?: Cancellable | null): boolean;
+    init(cancellable?: Cancellable): boolean;
     connect(signal: "closed", handler: (self: DBusConnection, remotePeerVanished: boolean, error: GLib.GError) => void, after?: boolean): number;
     connect(signal: "notify", handler: (self: DBusConnection, pspec: GObject.ParamSpec) => void, after?: boolean): number;
     connect(signal: string, handler: (...args: any[]) => any, after?: boolean): number;