@gtkx/ffi 0.10.5 → 0.11.1

package/dist/generated/gio/enums.js

@@ -217,9 +217,7 @@ export var DataStreamByteOrder;
     /** Selects endianness based on host machine's architecture. */
     DataStreamByteOrder[DataStreamByteOrder["HOST_ENDIAN"] = 2] = "HOST_ENDIAN";
 })(DataStreamByteOrder || (DataStreamByteOrder = {}));
-/**
- * #GDataStreamNewlineType is used when checking for or setting the line endings for a given file.
- */
+/** #GDataStreamNewlineType is used when checking for or setting the line endings for a given file. */
 export var DataStreamNewlineType;
 (function (DataStreamNewlineType) {
     /** Selects "LF" line endings, common on most modern UNIX platforms. */
@@ -236,30 +234,30 @@ export var DriveStartStopType;
 (function (DriveStartStopType) {
     /**
      * Unknown or drive doesn't support
-     * start/stop.
+     *    start/stop.
      */
     DriveStartStopType[DriveStartStopType["UNKNOWN"] = 0] = "UNKNOWN";
     /**
      * The stop method will physically
-     * shut down the drive and e.g. power down the port the drive is
-     * attached to.
+     *    shut down the drive and e.g. power down the port the drive is
+     *    attached to.
      */
     DriveStartStopType[DriveStartStopType["SHUTDOWN"] = 1] = "SHUTDOWN";
     /**
      * The start/stop methods are used
-     * for connecting/disconnect to the drive over the network.
+     *    for connecting/disconnect to the drive over the network.
      */
     DriveStartStopType[DriveStartStopType["NETWORK"] = 2] = "NETWORK";
     /**
      * The start/stop methods will
-     * assemble/disassemble a virtual drive from several physical
-     * drives.
+     *    assemble/disassemble a virtual drive from several physical
+     *    drives.
      */
     DriveStartStopType[DriveStartStopType["MULTIDISK"] = 3] = "MULTIDISK";
     /**
      * The start/stop methods will
-     * unlock/lock the disk (for example using the ATA `SECURITY UNLOCK
-     * DEVICE` command)
+     *    unlock/lock the disk (for example using the ATA `SECURITY UNLOCK
+     *    DEVICE` command)
      */
     DriveStartStopType[DriveStartStopType["PASSWORD"] = 4] = "PASSWORD";
 })(DriveStartStopType || (DriveStartStopType = {}));
@@ -331,25 +329,25 @@ export var FileMonitorEvent;
     FileMonitorEvent[FileMonitorEvent["UNMOUNTED"] = 6] = "UNMOUNTED";
     /**
      * the file was moved -- only sent if the
-     * (deprecated) %G_FILE_MONITOR_SEND_MOVED flag is set
+     *   (deprecated) %G_FILE_MONITOR_SEND_MOVED flag is set
      */
     FileMonitorEvent[FileMonitorEvent["MOVED"] = 7] = "MOVED";
     /**
      * the file was renamed within the
-     * current directory -- only sent if the %G_FILE_MONITOR_WATCH_MOVES
-     * flag is set.  Since: 2.46.
+     *   current directory -- only sent if the %G_FILE_MONITOR_WATCH_MOVES
+     *   flag is set.  Since: 2.46.
      */
     FileMonitorEvent[FileMonitorEvent["RENAMED"] = 8] = "RENAMED";
     /**
      * the file was moved into the
-     * monitored directory from another location -- only sent if the
-     * %G_FILE_MONITOR_WATCH_MOVES flag is set.  Since: 2.46.
+     *   monitored directory from another location -- only sent if the
+     *   %G_FILE_MONITOR_WATCH_MOVES flag is set.  Since: 2.46.
      */
     FileMonitorEvent[FileMonitorEvent["MOVED_IN"] = 9] = "MOVED_IN";
     /**
      * the file was moved out of the
-     * monitored directory to another location -- only sent if the
-     * %G_FILE_MONITOR_WATCH_MOVES flag is set.  Since: 2.46
+     *   monitored directory to another location -- only sent if the
+     *   %G_FILE_MONITOR_WATCH_MOVES flag is set.  Since: 2.46
      */
     FileMonitorEvent[FileMonitorEvent["MOVED_OUT"] = 10] = "MOVED_OUT";
 })(FileMonitorEvent || (FileMonitorEvent = {}));
@@ -375,12 +373,12 @@ export var FileType;
     FileType[FileType["DIRECTORY"] = 2] = "DIRECTORY";
     /**
      * File handle represents a symbolic link
-     * (Unix systems).
+     *    (Unix systems).
      */
     FileType[FileType["SYMBOLIC_LINK"] = 3] = "SYMBOLIC_LINK";
     /**
      * File is a "special" file, such as a socket, fifo,
-     * block device, or character device.
+     *    block device, or character device.
      */
     FileType[FileType["SPECIAL"] = 4] = "SPECIAL";
     /** File is a shortcut (Windows systems). */
@@ -411,10 +409,10 @@ export var FilesystemPreviewType;
  * distinguished before. You should therefore avoid writing code like
  * |[<!-- language="C" -->
  * if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED))
- * {
- * // Assume that this is EPRINTERONFIRE
- * ...
- * }
+ *   {
+ *     // Assume that this is EPRINTERONFIRE
+ *     ...
+ *   }
  * ]|
  * but should instead treat all unrecognized error codes the same as
  * %G_IO_ERROR_FAILED.
@@ -426,7 +424,7 @@ export var IOErrorEnum;
 (function (IOErrorEnum) {
     /**
      * Generic error condition for when an operation fails
-     * and no more specific #GIOErrorEnum value is defined.
+     *     and no more specific #GIOErrorEnum value is defined.
      */
     IOErrorEnum[IOErrorEnum["FAILED"] = 0] = "FAILED";
     /** File not found. */
@@ -489,13 +487,13 @@ export var IOErrorEnum;
     IOErrorEnum[IOErrorEnum["WOULD_MERGE"] = 29] = "WOULD_MERGE";
     /**
      * Operation failed and a helper program has
-     * already interacted with the user. Do not display any error dialog.
+     *     already interacted with the user. Do not display any error dialog.
      */
     IOErrorEnum[IOErrorEnum["FAILED_HANDLED"] = 30] = "FAILED_HANDLED";
     /**
      * The current process has too many files
-     * open and can't open any more. Duplicate descriptors do count toward
-     * this limit. Since 2.20
+     *     open and can't open any more. Duplicate descriptors do count toward
+     *     this limit. Since 2.20
      */
     IOErrorEnum[IOErrorEnum["TOO_MANY_OPEN_FILES"] = 31] = "TOO_MANY_OPEN_FILES";
     /** The object has not been initialized. Since 2.22 */
@@ -508,10 +506,10 @@ export var IOErrorEnum;
     IOErrorEnum[IOErrorEnum["INVALID_DATA"] = 35] = "INVALID_DATA";
     /**
      * A remote object generated an error that
-     * doesn't correspond to a locally registered #GError error
-     * domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
-     * error name and g_dbus_error_strip_remote_error() to fix up the
-     * message so it matches what was received on the wire. Since 2.26.
+     *     doesn't correspond to a locally registered #GError error
+     *     domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
+     *     error name and g_dbus_error_strip_remote_error() to fix up the
+     *     message so it matches what was received on the wire. Since 2.26.
      */
     IOErrorEnum[IOErrorEnum["DBUS_ERROR"] = 36] = "DBUS_ERROR";
     /** Host unreachable. Since 2.26 */
@@ -528,17 +526,17 @@ export var IOErrorEnum;
     IOErrorEnum[IOErrorEnum["PROXY_NEED_AUTH"] = 42] = "PROXY_NEED_AUTH";
     /**
      * Proxy connection is not allowed by ruleset.
-     * Since 2.26
+     *     Since 2.26
      */
     IOErrorEnum[IOErrorEnum["PROXY_NOT_ALLOWED"] = 43] = "PROXY_NOT_ALLOWED";
     /** Broken pipe. Since 2.36 */
     IOErrorEnum[IOErrorEnum["BROKEN_PIPE"] = 44] = "BROKEN_PIPE";
     /**
      * Connection closed by peer. Note that this
-     * is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some
-     * "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others
-     * returned %G_IO_ERROR_FAILED. Now they should all return the same
-     * value, which has this more logical name. Since 2.44.
+     *     is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some
+     *     "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others
+     *     returned %G_IO_ERROR_FAILED. Now they should all return the same
+     *     value, which has this more logical name. Since 2.44.
      */
     IOErrorEnum[IOErrorEnum["CONNECTION_CLOSED"] = 44] = "CONNECTION_CLOSED";
     /** Transport endpoint is not connected. Since 2.44 */
@@ -557,8 +555,8 @@ export var IOModuleScopeFlags;
     IOModuleScopeFlags[IOModuleScopeFlags["NONE"] = 0] = "NONE";
     /**
      * When using this scope to load or
-     * scan modules, automatically block a modules which has the same base
-     * basename as previously loaded module.
+     *     scan modules, automatically block a modules which has the same base
+     *     basename as previously loaded module.
      */
     IOModuleScopeFlags[IOModuleScopeFlags["BLOCK_DUPLICATES"] = 1] = "BLOCK_DUPLICATES";
 })(IOModuleScopeFlags || (IOModuleScopeFlags = {}));
@@ -569,27 +567,27 @@ export var IOModuleScopeFlags;
  * #GMemoryMonitorWarningLevel as ranges, for example:
  * |[<!-- language="C" -->
  * if (warning_level > G_MEMORY_MONITOR_WARNING_LEVEL_LOW)
- * drop_caches ();
+ *   drop_caches ();
  * ]|
  */
 export var MemoryMonitorWarningLevel;
 (function (MemoryMonitorWarningLevel) {
     /**
      * Memory on the device is low, processes
-     * should free up unneeded resources (for example, in-memory caches) so they can
-     * be used elsewhere.
+     *   should free up unneeded resources (for example, in-memory caches) so they can
+     *   be used elsewhere.
      */
     MemoryMonitorWarningLevel[MemoryMonitorWarningLevel["LOW"] = 50] = "LOW";
     /**
      * Same as `G_MEMORY_MONITOR_WARNING_LEVEL_LOW`
-     * but the device has even less free memory, so processes should try harder to free
-     * up unneeded resources. If your process does not need to stay running, it is a
-     * good time for it to quit.
+     *   but the device has even less free memory, so processes should try harder to free
+     *   up unneeded resources. If your process does not need to stay running, it is a
+     *   good time for it to quit.
      */
     MemoryMonitorWarningLevel[MemoryMonitorWarningLevel["MEDIUM"] = 100] = "MEDIUM";
     /**
      * The system will soon start terminating
-     * processes to reclaim memory, including background processes.
+     *   processes to reclaim memory, including background processes.
      */
     MemoryMonitorWarningLevel[MemoryMonitorWarningLevel["CRITICAL"] = 255] = "CRITICAL";
 })(MemoryMonitorWarningLevel || (MemoryMonitorWarningLevel = {}));
@@ -601,17 +599,17 @@ export var MountOperationResult;
 (function (MountOperationResult) {
     /**
      * The request was fulfilled and the
-     * user specified data is now available
+     *     user specified data is now available
      */
     MountOperationResult[MountOperationResult["HANDLED"] = 0] = "HANDLED";
     /**
      * The user requested the mount operation
-     * to be aborted
+     *     to be aborted
      */
     MountOperationResult[MountOperationResult["ABORTED"] = 1] = "ABORTED";
     /**
      * The request was unhandled (i.e. not
-     * implemented)
+     *     implemented)
      */
     MountOperationResult[MountOperationResult["UNHANDLED"] = 2] = "UNHANDLED";
 })(MountOperationResult || (MountOperationResult = {}));
@@ -620,24 +618,24 @@ export var NetworkConnectivity;
 (function (NetworkConnectivity) {
     /**
      * The host is not configured with a
-     * route to the Internet; it may or may not be connected to a local
-     * network.
+     *   route to the Internet; it may or may not be connected to a local
+     *   network.
      */
     NetworkConnectivity[NetworkConnectivity["LOCAL"] = 1] = "LOCAL";
     /**
      * The host is connected to a network, but
-     * does not appear to be able to reach the full Internet, perhaps
-     * due to upstream network problems.
+     *   does not appear to be able to reach the full Internet, perhaps
+     *   due to upstream network problems.
      */
     NetworkConnectivity[NetworkConnectivity["LIMITED"] = 2] = "LIMITED";
     /**
      * The host is behind a captive portal and
-     * cannot reach the full Internet.
+     *   cannot reach the full Internet.
      */
     NetworkConnectivity[NetworkConnectivity["PORTAL"] = 3] = "PORTAL";
     /**
      * The host is connected to a network, and
-     * appears to be able to reach the full Internet.
+     *   appears to be able to reach the full Internet.
      */
     NetworkConnectivity[NetworkConnectivity["FULL"] = 4] = "FULL";
 })(NetworkConnectivity || (NetworkConnectivity = {}));
@@ -646,26 +644,26 @@ export var NotificationPriority;
 (function (NotificationPriority) {
     /**
      * the default priority, to be used for the
-     * majority of notifications (for example email messages, software updates,
-     * completed download/sync operations)
+     *   majority of notifications (for example email messages, software updates,
+     *   completed download/sync operations)
      */
     NotificationPriority[NotificationPriority["NORMAL"] = 0] = "NORMAL";
     /**
      * for notifications that do not require
-     * immediate attention - typically used for contextual background
-     * information, such as contact birthdays or local weather
+     *   immediate attention - typically used for contextual background
+     *   information, such as contact birthdays or local weather
      */
     NotificationPriority[NotificationPriority["LOW"] = 1] = "LOW";
     /**
      * for events that require more attention,
-     * usually because responses are time-sensitive (for example chat and SMS
-     * messages or alarms)
+     *   usually because responses are time-sensitive (for example chat and SMS
+     *   messages or alarms)
      */
     NotificationPriority[NotificationPriority["HIGH"] = 2] = "HIGH";
     /**
      * for urgent notifications, or notifications
-     * that require a response in a short space of time (for example phone calls
-     * or emergency warnings)
+     *   that require a response in a short space of time (for example phone calls
+     *   or emergency warnings)
      */
     NotificationPriority[NotificationPriority["URGENT"] = 3] = "URGENT";
 })(NotificationPriority || (NotificationPriority = {}));
@@ -712,12 +710,12 @@ export var ResolverError;
 (function (ResolverError) {
     /**
      * the requested name/address/service was not
-     * found
+     *     found
      */
     ResolverError[ResolverError["NOT_FOUND"] = 0] = "NOT_FOUND";
     /**
      * the requested information could not
-     * be looked up due to a network error or similar problem
+     *     be looked up due to a network error or similar problem
      */
     ResolverError[ResolverError["TEMPORARY_FAILURE"] = 1] = "TEMPORARY_FAILURE";
     /** unknown error */
@@ -793,37 +791,37 @@ export var SocketClientEvent;
     SocketClientEvent[SocketClientEvent["RESOLVED"] = 1] = "RESOLVED";
     /**
      * The client is connecting to a remote
-     * host (either a proxy or the destination server).
+     *   host (either a proxy or the destination server).
      */
     SocketClientEvent[SocketClientEvent["CONNECTING"] = 2] = "CONNECTING";
     /**
      * The client has connected to a remote
-     * host.
+     *   host.
      */
     SocketClientEvent[SocketClientEvent["CONNECTED"] = 3] = "CONNECTED";
     /**
      * The client is negotiating
-     * with a proxy to connect to the destination server.
+     *   with a proxy to connect to the destination server.
      */
     SocketClientEvent[SocketClientEvent["PROXY_NEGOTIATING"] = 4] = "PROXY_NEGOTIATING";
     /**
      * The client has negotiated
-     * with the proxy server.
+     *   with the proxy server.
      */
     SocketClientEvent[SocketClientEvent["PROXY_NEGOTIATED"] = 5] = "PROXY_NEGOTIATED";
     /**
      * The client is performing a
-     * TLS handshake.
+     *   TLS handshake.
      */
     SocketClientEvent[SocketClientEvent["TLS_HANDSHAKING"] = 6] = "TLS_HANDSHAKING";
     /**
      * The client has performed a
-     * TLS handshake.
+     *   TLS handshake.
      */
     SocketClientEvent[SocketClientEvent["TLS_HANDSHAKED"] = 7] = "TLS_HANDSHAKED";
     /**
      * The client is done with a particular
-     * #GSocketConnectable.
+     *   #GSocketConnectable.
      */
     SocketClientEvent[SocketClientEvent["COMPLETE"] = 8] = "COMPLETE";
 })(SocketClientEvent || (SocketClientEvent = {}));
@@ -857,12 +855,12 @@ export var SocketListenerEvent;
     SocketListenerEvent[SocketListenerEvent["BOUND"] = 1] = "BOUND";
     /**
      * The listener is about to start
-     * listening on this socket.
+     *    listening on this socket.
      */
     SocketListenerEvent[SocketListenerEvent["LISTENING"] = 2] = "LISTENING";
     /**
      * The listener is now listening on
-     * this socket.
+     *   this socket.
      */
     SocketListenerEvent[SocketListenerEvent["LISTENED"] = 3] = "LISTENED";
 })(SocketListenerEvent || (SocketListenerEvent = {}));
@@ -900,12 +898,12 @@ export var SocketType;
     SocketType[SocketType["STREAM"] = 1] = "STREAM";
     /**
      * Connectionless, unreliable datagram passing.
-     * (e.g. UDP)
+     *     (e.g. UDP)
      */
     SocketType[SocketType["DATAGRAM"] = 2] = "DATAGRAM";
     /**
      * Reliable connection-based passing of datagrams
-     * of fixed maximum length (e.g. SCTP).
+     *     of fixed maximum length (e.g. SCTP).
      */
     SocketType[SocketType["SEQPACKET"] = 3] = "SEQPACKET";
 })(SocketType || (SocketType = {}));
@@ -937,33 +935,33 @@ export var TlsChannelBindingError;
 (function (TlsChannelBindingError) {
     /**
      * Either entire binding
-     * retrieval facility or specific binding type is not implemented in the
-     * TLS backend.
+     *    retrieval facility or specific binding type is not implemented in the
+     *    TLS backend.
      */
     TlsChannelBindingError[TlsChannelBindingError["NOT_IMPLEMENTED"] = 0] = "NOT_IMPLEMENTED";
     /**
      * The handshake is not yet
-     * complete on the connection which is a strong requirement for any existing
-     * binding type.
+     *    complete on the connection which is a strong requirement for any existing
+     *    binding type.
      */
     TlsChannelBindingError[TlsChannelBindingError["INVALID_STATE"] = 1] = "INVALID_STATE";
     /**
      * Handshake is complete but
-     * binding data is not available. That normally indicates the TLS
-     * implementation failed to provide the binding data. For example, some
-     * implementations do not provide a peer certificate for resumed connections.
+     *    binding data is not available. That normally indicates the TLS
+     *    implementation failed to provide the binding data. For example, some
+     *    implementations do not provide a peer certificate for resumed connections.
      */
     TlsChannelBindingError[TlsChannelBindingError["NOT_AVAILABLE"] = 2] = "NOT_AVAILABLE";
     /**
      * Binding type is not supported
-     * on the current connection. This error could be triggered when requesting
-     * `tls-server-end-point` binding data for a certificate which has no hash
-     * function or uses multiple hash functions.
+     *    on the current connection. This error could be triggered when requesting
+     *    `tls-server-end-point` binding data for a certificate which has no hash
+     *    function or uses multiple hash functions.
      */
     TlsChannelBindingError[TlsChannelBindingError["NOT_SUPPORTED"] = 3] = "NOT_SUPPORTED";
     /**
      * Any other backend error
-     * preventing binding data retrieval.
+     *    preventing binding data retrieval.
      */
     TlsChannelBindingError[TlsChannelBindingError["GENERAL_ERROR"] = 4] = "GENERAL_ERROR";
 })(TlsChannelBindingError || (TlsChannelBindingError = {}));
@@ -977,17 +975,17 @@ export var TlsChannelBindingType;
 (function (TlsChannelBindingType) {
     /**
      * [`tls-unique`](https://tools.ietf.org/html/rfc5929#section-3) binding
-     * type
+     *    type
      */
     TlsChannelBindingType[TlsChannelBindingType["UNIQUE"] = 0] = "UNIQUE";
     /**
      * [`tls-server-end-point`](https://tools.ietf.org/html/rfc5929#section-4)
-     * binding type
+     *    binding type
      */
     TlsChannelBindingType[TlsChannelBindingType["SERVER_END_POINT"] = 1] = "SERVER_END_POINT";
     /**
      * `tls-exporter` binding
-     * type. Since: 2.74
+     *    type. Since: 2.74
      */
     TlsChannelBindingType[TlsChannelBindingType["EXPORTER"] = 2] = "EXPORTER";
 })(TlsChannelBindingType || (TlsChannelBindingType = {}));
@@ -1002,7 +1000,7 @@ export var TlsDatabaseLookupFlags;
     TlsDatabaseLookupFlags[TlsDatabaseLookupFlags["NONE"] = 0] = "NONE";
     /**
      * Restrict lookup to certificates that have
-     * a private key.
+     *     a private key.
      */
     TlsDatabaseLookupFlags[TlsDatabaseLookupFlags["KEYPAIR"] = 1] = "KEYPAIR";
 })(TlsDatabaseLookupFlags || (TlsDatabaseLookupFlags = {}));
@@ -1018,40 +1016,40 @@ export var TlsError;
     TlsError[TlsError["MISC"] = 1] = "MISC";
     /**
      * The certificate presented could not
-     * be parsed or failed validation.
+     *   be parsed or failed validation.
      */
     TlsError[TlsError["BAD_CERTIFICATE"] = 2] = "BAD_CERTIFICATE";
     /**
      * The TLS handshake failed because the
-     * peer does not seem to be a TLS server.
+     *   peer does not seem to be a TLS server.
      */
     TlsError[TlsError["NOT_TLS"] = 3] = "NOT_TLS";
     /**
      * The TLS handshake failed because the
-     * peer's certificate was not acceptable.
+     *   peer's certificate was not acceptable.
      */
     TlsError[TlsError["HANDSHAKE"] = 4] = "HANDSHAKE";
     /**
      * The TLS handshake failed because
-     * the server requested a client-side certificate, but none was
-     * provided. See g_tls_connection_set_certificate().
+     *   the server requested a client-side certificate, but none was
+     *   provided. See g_tls_connection_set_certificate().
      */
     TlsError[TlsError["CERTIFICATE_REQUIRED"] = 5] = "CERTIFICATE_REQUIRED";
     /**
      * The TLS connection was closed without proper
-     * notice, which may indicate an attack. See
-     * g_tls_connection_set_require_close_notify().
+     *   notice, which may indicate an attack. See
+     *   g_tls_connection_set_require_close_notify().
      */
     TlsError[TlsError["EOF"] = 6] = "EOF";
     /**
      * The TLS handshake failed
-     * because the client sent the fallback SCSV, indicating a protocol
-     * downgrade attack. Since: 2.60
+     *   because the client sent the fallback SCSV, indicating a protocol
+     *   downgrade attack. Since: 2.60
      */
     TlsError[TlsError["INAPPROPRIATE_FALLBACK"] = 7] = "INAPPROPRIATE_FALLBACK";
     /**
      * The certificate failed
-     * to load because a password was incorrect. Since: 2.72
+     *   to load because a password was incorrect. Since: 2.72
      */
     TlsError[TlsError["BAD_CERTIFICATE_PASSWORD"] = 8] = "BAD_CERTIFICATE_PASSWORD";
 })(TlsError || (TlsError = {}));
@@ -1063,17 +1061,17 @@ export var TlsInteractionResult;
 (function (TlsInteractionResult) {
     /**
      * The interaction was unhandled (i.e. not
-     * implemented).
+     *     implemented).
      */
     TlsInteractionResult[TlsInteractionResult["UNHANDLED"] = 0] = "UNHANDLED";
     /**
      * The interaction completed, and resulting data
-     * is available.
+     *     is available.
      */
     TlsInteractionResult[TlsInteractionResult["HANDLED"] = 1] = "HANDLED";
     /**
      * The interaction has failed, or was cancelled.
-     * and the operation should be aborted.
+     *     and the operation should be aborted.
      */
     TlsInteractionResult[TlsInteractionResult["FAILED"] = 2] = "FAILED";
 })(TlsInteractionResult || (TlsInteractionResult = {}));
@@ -1147,7 +1145,7 @@ export var UnixSocketAddressType;
     UnixSocketAddressType[UnixSocketAddressType["ABSTRACT"] = 3] = "ABSTRACT";
     /**
      * an abstract name, 0-padded
-     * to the full length of a unix socket name
+     *   to the full length of a unix socket name
      */
     UnixSocketAddressType[UnixSocketAddressType["ABSTRACT_PADDED"] = 4] = "ABSTRACT_PADDED";
 })(UnixSocketAddressType || (UnixSocketAddressType = {}));
@@ -1185,63 +1183,63 @@ export var ApplicationFlags;
     ApplicationFlags[ApplicationFlags["DEFAULT_FLAGS"] = 0] = "DEFAULT_FLAGS";
     /**
      * Run as a service. In this mode, registration
-     * fails if the service is already running, and the application
-     * will initially wait up to 10 seconds for an initial activation
-     * message to arrive.
+     *      fails if the service is already running, and the application
+     *      will initially wait up to 10 seconds for an initial activation
+     *      message to arrive.
      */
     ApplicationFlags[ApplicationFlags["IS_SERVICE"] = 1] = "IS_SERVICE";
     /** Don't try to become the primary instance. */
     ApplicationFlags[ApplicationFlags["IS_LAUNCHER"] = 2] = "IS_LAUNCHER";
     /**
      * This application handles opening files (in
-     * the primary instance). Note that this flag only affects the default
-     * implementation of local_command_line(), and has no effect if
-     * %G_APPLICATION_HANDLES_COMMAND_LINE is given.
-     * See g_application_run() for details.
+     *     the primary instance). Note that this flag only affects the default
+     *     implementation of local_command_line(), and has no effect if
+     *     %G_APPLICATION_HANDLES_COMMAND_LINE is given.
+     *     See g_application_run() for details.
      */
     ApplicationFlags[ApplicationFlags["HANDLES_OPEN"] = 4] = "HANDLES_OPEN";
     /**
      * This application handles command line
-     * arguments (in the primary instance). Note that this flag only affect
-     * the default implementation of local_command_line().
-     * See g_application_run() for details.
+     *     arguments (in the primary instance). Note that this flag only affect
+     *     the default implementation of local_command_line().
+     *     See g_application_run() for details.
      */
     ApplicationFlags[ApplicationFlags["HANDLES_COMMAND_LINE"] = 8] = "HANDLES_COMMAND_LINE";
     /**
      * Send the environment of the
-     * launching process to the primary instance. Set this flag if your
-     * application is expected to behave differently depending on certain
-     * environment variables. For instance, an editor might be expected
-     * to use the `GIT_COMMITTER_NAME` environment variable
-     * when editing a git commit message. The environment is available
-     * to the #GApplication::command-line signal handler, via
-     * g_application_command_line_getenv().
+     *     launching process to the primary instance. Set this flag if your
+     *     application is expected to behave differently depending on certain
+     *     environment variables. For instance, an editor might be expected
+     *     to use the `GIT_COMMITTER_NAME` environment variable
+     *     when editing a git commit message. The environment is available
+     *     to the #GApplication::command-line signal handler, via
+     *     g_application_command_line_getenv().
      */
     ApplicationFlags[ApplicationFlags["SEND_ENVIRONMENT"] = 16] = "SEND_ENVIRONMENT";
     /**
      * Make no attempts to do any of the typical
-     * single-instance application negotiation, even if the application
-     * ID is given.  The application neither attempts to become the
-     * owner of the application ID nor does it check if an existing
-     * owner already exists.  Everything occurs in the local process.
-     * Since: 2.30.
+     *     single-instance application negotiation, even if the application
+     *     ID is given.  The application neither attempts to become the
+     *     owner of the application ID nor does it check if an existing
+     *     owner already exists.  Everything occurs in the local process.
+     *     Since: 2.30.
      */
     ApplicationFlags[ApplicationFlags["NON_UNIQUE"] = 32] = "NON_UNIQUE";
     /**
      * Allow users to override the
-     * application ID from the command line with `--gapplication-app-id`.
-     * Since: 2.48
+     *     application ID from the command line with `--gapplication-app-id`.
+     *     Since: 2.48
      */
     ApplicationFlags[ApplicationFlags["CAN_OVERRIDE_APP_ID"] = 64] = "CAN_OVERRIDE_APP_ID";
     /**
      * Allow another instance to take over
-     * the bus name. Since: 2.60
+     *     the bus name. Since: 2.60
      */
     ApplicationFlags[ApplicationFlags["ALLOW_REPLACEMENT"] = 128] = "ALLOW_REPLACEMENT";
     /**
      * Take over from another instance. This flag is
-     * usually set by passing `--gapplication-replace` on the commandline.
-     * Since: 2.60
+     *     usually set by passing `--gapplication-replace` on the commandline.
+     *     Since: 2.60
      */
     ApplicationFlags[ApplicationFlags["REPLACE"] = 256] = "REPLACE";
 })(ApplicationFlags || (ApplicationFlags = {}));
@@ -1366,11 +1364,11 @@ export var DBusConnectionFlags;
     DBusConnectionFlags[DBusConnectionFlags["AUTHENTICATION_REQUIRE_SAME_USER"] = 32] = "AUTHENTICATION_REQUIRE_SAME_USER";
     /**
      * When authenticating, try to use
-     * protocols that work across a Linux user namespace boundary, even if this
-     * reduces interoperability with older D-Bus implementations. This currently
-     * affects client-side `EXTERNAL` authentication, for which this flag makes
-     * connections to a server in another user namespace succeed, but causes
-     * a deadlock when connecting to a GDBus server older than 2.73.3. Since: 2.74
+     *  protocols that work across a Linux user namespace boundary, even if this
+     *  reduces interoperability with older D-Bus implementations. This currently
+     *  affects client-side `EXTERNAL` authentication, for which this flag makes
+     *  connections to a server in another user namespace succeed, but causes
+     *  a deadlock when connecting to a GDBus server older than 2.73.3. Since: 2.74
      */
     DBusConnectionFlags[DBusConnectionFlags["CROSS_NAMESPACE"] = 64] = "CROSS_NAMESPACE";
 })(DBusConnectionFlags || (DBusConnectionFlags = {}));
@@ -1381,9 +1379,9 @@ export var DBusInterfaceSkeletonFlags;
     DBusInterfaceSkeletonFlags[DBusInterfaceSkeletonFlags["NONE"] = 0] = "NONE";
     /**
      * Each method invocation is handled in
-     * a thread dedicated to the invocation. This means that the method implementation can use blocking IO
-     * without blocking any other part of the process. It also means that the method implementation must
-     * use locking to access data structures used by other threads.
+     *   a thread dedicated to the invocation. This means that the method implementation can use blocking IO
+     *   without blocking any other part of the process. It also means that the method implementation must
+     *   use locking to access data structures used by other threads.
      */
     DBusInterfaceSkeletonFlags[DBusInterfaceSkeletonFlags["HANDLE_METHOD_INVOCATIONS_IN_THREAD"] = 1] = "HANDLE_METHOD_INVOCATIONS_IN_THREAD";
 })(DBusInterfaceSkeletonFlags || (DBusInterfaceSkeletonFlags = {}));
@@ -1413,9 +1411,9 @@ export var DBusObjectManagerClientFlags;
     DBusObjectManagerClientFlags[DBusObjectManagerClientFlags["NONE"] = 0] = "NONE";
     /**
      * If not set and the
-     * manager is for a well-known name, then request the bus to launch
-     * an owner for the name if no-one owns the name. This flag can only
-     * be used in managers for well-known names.
+     *   manager is for a well-known name, then request the bus to launch
+     *   an owner for the name if no-one owns the name. This flag can only
+     *   be used in managers for well-known names.
      */
     DBusObjectManagerClientFlags[DBusObjectManagerClientFlags["DO_NOT_AUTO_START"] = 1] = "DO_NOT_AUTO_START";
 })(DBusObjectManagerClientFlags || (DBusObjectManagerClientFlags = {}));
@@ -1444,9 +1442,7 @@ export var DBusProxyFlags;
      * This flag is only meaningful in proxies for well-known names.
      */
     DBusProxyFlags[DBusProxyFlags["DO_NOT_AUTO_START"] = 4] = "DO_NOT_AUTO_START";
-    /**
-     * If set, the property value for any __invalidated property__ will be (asynchronously) retrieved upon receiving the `PropertiesChanged` D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
-     */
+    /** If set, the property value for any __invalidated property__ will be (asynchronously) retrieved upon receiving the `PropertiesChanged` D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32. */
     DBusProxyFlags[DBusProxyFlags["GET_INVALIDATED_PROPERTIES"] = 8] = "GET_INVALIDATED_PROPERTIES";
     /**
      * If the proxy is for a well-known name,
@@ -1457,8 +1453,8 @@ export var DBusProxyFlags;
     DBusProxyFlags[DBusProxyFlags["DO_NOT_AUTO_START_AT_CONSTRUCTION"] = 16] = "DO_NOT_AUTO_START_AT_CONSTRUCTION";
     /**
      * Don't actually send the AddMatch D-Bus
-     * call for this signal subscription. This gives you more control
-     * over which match rules you add (but you must add them manually). (Since: 2.72)
+     *    call for this signal subscription. This gives you more control
+     *    over which match rules you add (but you must add them manually). (Since: 2.72)
      */
     DBusProxyFlags[DBusProxyFlags["NO_MATCH_RULE"] = 32] = "NO_MATCH_RULE";
 })(DBusProxyFlags || (DBusProxyFlags = {}));
@@ -1496,9 +1492,7 @@ export var DBusServerFlags;
      */
     DBusServerFlags[DBusServerFlags["AUTHENTICATION_REQUIRE_SAME_USER"] = 4] = "AUTHENTICATION_REQUIRE_SAME_USER";
 })(DBusServerFlags || (DBusServerFlags = {}));
-/**
- * Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
- */
+/** Flags used when subscribing to signals via g_dbus_connection_signal_subscribe(). */
 export var DBusSignalFlags;
 (function (DBusSignalFlags) {
     /** No flags set. */
@@ -1528,8 +1522,8 @@ export var DBusSubtreeFlags;
     DBusSubtreeFlags[DBusSubtreeFlags["NONE"] = 0] = "NONE";
     /**
      * Method calls to objects not in the enumerated range
-     * will still be dispatched. This is useful if you want
-     * to dynamically spawn objects in the subtree.
+     *                                                       will still be dispatched. This is useful if you want
+     *                                                       to dynamically spawn objects in the subtree.
      */
     DBusSubtreeFlags[DBusSubtreeFlags["DISPATCH_TO_UNENUMERATED_NODES"] = 1] = "DISPATCH_TO_UNENUMERATED_NODES";
 })(DBusSubtreeFlags || (DBusSubtreeFlags = {}));
@@ -1560,19 +1554,15 @@ export var FileCopyFlags;
     FileCopyFlags[FileCopyFlags["BACKUP"] = 2] = "BACKUP";
     /** Don't follow symlinks. */
     FileCopyFlags[FileCopyFlags["NOFOLLOW_SYMLINKS"] = 4] = "NOFOLLOW_SYMLINKS";
-    /**
-     * Copy all file metadata instead of just default set used for copy (see #GFileInfo).
-     */
+    /** Copy all file metadata instead of just default set used for copy (see #GFileInfo). */
     FileCopyFlags[FileCopyFlags["ALL_METADATA"] = 8] = "ALL_METADATA";
     /** Don't use copy and delete fallback if native move not supported. */
     FileCopyFlags[FileCopyFlags["NO_FALLBACK_FOR_MOVE"] = 16] = "NO_FALLBACK_FOR_MOVE";
-    /**
-     * Leaves target file with default perms, instead of setting the source file perms.
-     */
+    /** Leaves target file with default perms, instead of setting the source file perms. */
     FileCopyFlags[FileCopyFlags["TARGET_DEFAULT_PERMS"] = 32] = "TARGET_DEFAULT_PERMS";
     /**
      * Use default modification
-     * timestamps instead of copying them from the source file. Since 2.80
+     *     timestamps instead of copying them from the source file. Since 2.80
      */
     FileCopyFlags[FileCopyFlags["TARGET_DEFAULT_MODIFIED_TIME"] = 64] = "TARGET_DEFAULT_MODIFIED_TIME";
 })(FileCopyFlags || (FileCopyFlags = {}));
@@ -1583,20 +1573,20 @@ export var FileCreateFlags;
     FileCreateFlags[FileCreateFlags["NONE"] = 0] = "NONE";
     /**
      * Create a file that can only be
-     * accessed by the current user.
+     *    accessed by the current user.
      */
     FileCreateFlags[FileCreateFlags["PRIVATE"] = 1] = "PRIVATE";
     /**
      * Replace the destination
-     * as if it didn't exist before. Don't try to keep any old
-     * permissions, replace instead of following links. This
-     * is generally useful if you're doing a "copy over"
-     * rather than a "save new version of" replace operation.
-     * You can think of it as "unlink destination" before
-     * writing to it, although the implementation may not
-     * be exactly like that. This flag can only be used with
-     * g_file_replace() and its variants, including g_file_replace_contents().
-     * Since 2.20
+     *    as if it didn't exist before. Don't try to keep any old
+     *    permissions, replace instead of following links. This
+     *    is generally useful if you're doing a "copy over"
+     *    rather than a "save new version of" replace operation.
+     *    You can think of it as "unlink destination" before
+     *    writing to it, although the implementation may not
+     *    be exactly like that. This flag can only be used with
+     *    g_file_replace() and its variants, including g_file_replace_contents().
+     *    Since 2.20
      */
     FileCreateFlags[FileCreateFlags["REPLACE_DESTINATION"] = 2] = "REPLACE_DESTINATION";
 })(FileCreateFlags || (FileCreateFlags = {}));
@@ -1607,23 +1597,23 @@ export var FileMeasureFlags;
     FileMeasureFlags[FileMeasureFlags["NONE"] = 0] = "NONE";
     /**
      * Report any error encountered
-     * while traversing the directory tree.  Normally errors are only
-     * reported for the toplevel file.
+     *   while traversing the directory tree.  Normally errors are only
+     *   reported for the toplevel file.
      */
     FileMeasureFlags[FileMeasureFlags["REPORT_ANY_ERROR"] = 2] = "REPORT_ANY_ERROR";
     /**
      * Tally usage based on apparent file
-     * sizes.  Normally, the block-size is used, if available, as this is a
-     * more accurate representation of disk space used.
-     * Compare with `du --apparent-size`.
-     * Since GLib 2.78. and similarly to `du` since GNU Coreutils 9.2, this will
-     * ignore the sizes of file types other than regular files and links, as the
-     * sizes of other file types are not specified in a standard way.
+     *   sizes.  Normally, the block-size is used, if available, as this is a
+     *   more accurate representation of disk space used.
+     *   Compare with `du --apparent-size`.
+     *   Since GLib 2.78. and similarly to `du` since GNU Coreutils 9.2, this will
+     *   ignore the sizes of file types other than regular files and links, as the
+     *   sizes of other file types are not specified in a standard way.
      */
     FileMeasureFlags[FileMeasureFlags["APPARENT_SIZE"] = 4] = "APPARENT_SIZE";
     /**
      * Do not cross mount point boundaries.
-     * Compare with `du -x`.
+     *   Compare with `du -x`.
      */
     FileMeasureFlags[FileMeasureFlags["NO_XDEV"] = 8] = "NO_XDEV";
 })(FileMeasureFlags || (FileMeasureFlags = {}));
@@ -1636,23 +1626,23 @@ export var FileMonitorFlags;
     FileMonitorFlags[FileMonitorFlags["WATCH_MOUNTS"] = 1] = "WATCH_MOUNTS";
     /**
      * Pair DELETED and CREATED events caused
-     * by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED
-     * event instead (NB: not supported on all backends; the default
-     * behaviour -without specifying this flag- is to send single DELETED
-     * and CREATED events).  Deprecated since 2.46: use
-     * %G_FILE_MONITOR_WATCH_MOVES instead.
+     *   by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED
+     *   event instead (NB: not supported on all backends; the default
+     *   behaviour -without specifying this flag- is to send single DELETED
+     *   and CREATED events).  Deprecated since 2.46: use
+     *   %G_FILE_MONITOR_WATCH_MOVES instead.
      */
     FileMonitorFlags[FileMonitorFlags["SEND_MOVED"] = 2] = "SEND_MOVED";
     /**
      * Watch for changes to the file made
-     * via another hard link. Since 2.36.
+     *   via another hard link. Since 2.36.
      */
     FileMonitorFlags[FileMonitorFlags["WATCH_HARD_LINKS"] = 4] = "WATCH_HARD_LINKS";
     /**
      * Watch for rename operations on a
-     * monitored directory.  This causes %G_FILE_MONITOR_EVENT_RENAMED,
-     * %G_FILE_MONITOR_EVENT_MOVED_IN and %G_FILE_MONITOR_EVENT_MOVED_OUT
-     * events to be emitted when possible.  Since: 2.46.
+     *   monitored directory.  This causes %G_FILE_MONITOR_EVENT_RENAMED,
+     *   %G_FILE_MONITOR_EVENT_MOVED_IN and %G_FILE_MONITOR_EVENT_MOVED_OUT
+     *   events to be emitted when possible.  Since: 2.46.
      */
     FileMonitorFlags[FileMonitorFlags["WATCH_MOVES"] = 8] = "WATCH_MOVES";
 })(FileMonitorFlags || (FileMonitorFlags = {}));
@@ -1671,17 +1661,17 @@ export var IOStreamSpliceFlags;
     IOStreamSpliceFlags[IOStreamSpliceFlags["NONE"] = 0] = "NONE";
     /**
      * Close the first stream after
-     * the splice.
+     *     the splice.
      */
     IOStreamSpliceFlags[IOStreamSpliceFlags["CLOSE_STREAM1"] = 1] = "CLOSE_STREAM1";
     /**
      * Close the second stream after
-     * the splice.
+     *     the splice.
      */
     IOStreamSpliceFlags[IOStreamSpliceFlags["CLOSE_STREAM2"] = 2] = "CLOSE_STREAM2";
     /**
      * Wait for both splice operations to finish
-     * before calling the callback.
+     *     before calling the callback.
      */
     IOStreamSpliceFlags[IOStreamSpliceFlags["WAIT_FOR_BOTH"] = 4] = "WAIT_FOR_BOTH";
 })(IOStreamSpliceFlags || (IOStreamSpliceFlags = {}));
@@ -1698,7 +1688,7 @@ export var MountUnmountFlags;
     MountUnmountFlags[MountUnmountFlags["NONE"] = 0] = "NONE";
     /**
      * Unmount even if there are outstanding
-     * file operations on the mount.
+     *  file operations on the mount.
      */
     MountUnmountFlags[MountUnmountFlags["FORCE"] = 1] = "FORCE";
 })(MountUnmountFlags || (MountUnmountFlags = {}));
@@ -1709,12 +1699,12 @@ export var OutputStreamSpliceFlags;
     OutputStreamSpliceFlags[OutputStreamSpliceFlags["NONE"] = 0] = "NONE";
     /**
      * Close the source stream after
-     * the splice.
+     *     the splice.
      */
     OutputStreamSpliceFlags[OutputStreamSpliceFlags["CLOSE_SOURCE"] = 1] = "CLOSE_SOURCE";
     /**
      * Close the target stream after
-     * the splice.
+     *     the splice.
      */
     OutputStreamSpliceFlags[OutputStreamSpliceFlags["CLOSE_TARGET"] = 2] = "CLOSE_TARGET";
 })(OutputStreamSpliceFlags || (OutputStreamSpliceFlags = {}));
@@ -1757,27 +1747,27 @@ export var SettingsBindFlags;
     SettingsBindFlags[SettingsBindFlags["DEFAULT"] = 0] = "DEFAULT";
     /**
      * Update the {@link GObject.Object} property when the setting changes.
-     * It is an error to use this flag if the property is not writable.
+     *   It is an error to use this flag if the property is not writable.
      */
     SettingsBindFlags[SettingsBindFlags["GET"] = 1] = "GET";
     /**
      * Update the setting when the {@link GObject.Object} property changes.
-     * It is an error to use this flag if the property is not readable.
+     *   It is an error to use this flag if the property is not readable.
      */
     SettingsBindFlags[SettingsBindFlags["SET"] = 2] = "SET";
     /** Do not try to bind a ‘sensitivity’ property to the writability of the setting */
     SettingsBindFlags[SettingsBindFlags["NO_SENSITIVITY"] = 4] = "NO_SENSITIVITY";
     /**
      * When set in addition to {@link Gio.SettingsBindFlags.GET},
-     * set the {@link GObject.Object} property
-     * value initially from the setting, but do not listen for changes of the setting
+     *   set the {@link GObject.Object} property
+     *   value initially from the setting, but do not listen for changes of the setting
      */
     SettingsBindFlags[SettingsBindFlags["GET_NO_CHANGES"] = 8] = "GET_NO_CHANGES";
     /**
      * When passed to {@link Gio.Settings.bind},
-     * uses a pair of mapping functions that invert
-     * the boolean value when mapping between the setting and the property.  The setting and property must both
-     * be booleans.  You cannot pass this flag to {@link Gio.Settings.bind_with_mapping}.
+     *   uses a pair of mapping functions that invert
+     *   the boolean value when mapping between the setting and the property.  The setting and property must both
+     *   be booleans.  You cannot pass this flag to {@link Gio.Settings.bind_with_mapping}.
      */
     SettingsBindFlags[SettingsBindFlags["INVERT_BOOLEAN"] = 16] = "INVERT_BOOLEAN";
 })(SettingsBindFlags || (SettingsBindFlags = {}));
@@ -1796,12 +1786,12 @@ export var SocketMsgFlags;
     SocketMsgFlags[SocketMsgFlags["OOB"] = 1] = "OOB";
     /**
      * Read data from the socket without removing it from
-     * the queue.
+     *     the queue.
      */
     SocketMsgFlags[SocketMsgFlags["PEEK"] = 2] = "PEEK";
     /**
      * Don't use a gateway to send out the packet,
-     * only send to hosts on directly connected networks.
+     *     only send to hosts on directly connected networks.
      */
     SocketMsgFlags[SocketMsgFlags["DONTROUTE"] = 4] = "DONTROUTE";
 })(SocketMsgFlags || (SocketMsgFlags = {}));
@@ -1822,54 +1812,54 @@ export var SubprocessFlags;
     SubprocessFlags[SubprocessFlags["NONE"] = 0] = "NONE";
     /**
      * create a pipe for the stdin of the
-     * spawned process that can be accessed with
-     * g_subprocess_get_stdin_pipe().
+     *   spawned process that can be accessed with
+     *   g_subprocess_get_stdin_pipe().
      */
     SubprocessFlags[SubprocessFlags["STDIN_PIPE"] = 1] = "STDIN_PIPE";
     /**
      * stdin is inherited from the
-     * calling process.
+     *   calling process.
      */
     SubprocessFlags[SubprocessFlags["STDIN_INHERIT"] = 2] = "STDIN_INHERIT";
     /**
      * create a pipe for the stdout of the
-     * spawned process that can be accessed with
-     * g_subprocess_get_stdout_pipe().
+     *   spawned process that can be accessed with
+     *   g_subprocess_get_stdout_pipe().
      */
     SubprocessFlags[SubprocessFlags["STDOUT_PIPE"] = 4] = "STDOUT_PIPE";
     /**
      * silence the stdout of the spawned
-     * process (ie: redirect to `/dev/null`).
+     *   process (ie: redirect to `/dev/null`).
      */
     SubprocessFlags[SubprocessFlags["STDOUT_SILENCE"] = 8] = "STDOUT_SILENCE";
     /**
      * create a pipe for the stderr of the
-     * spawned process that can be accessed with
-     * g_subprocess_get_stderr_pipe().
+     *   spawned process that can be accessed with
+     *   g_subprocess_get_stderr_pipe().
      */
     SubprocessFlags[SubprocessFlags["STDERR_PIPE"] = 16] = "STDERR_PIPE";
     /**
      * silence the stderr of the spawned
-     * process (ie: redirect to `/dev/null`).
+     *   process (ie: redirect to `/dev/null`).
      */
     SubprocessFlags[SubprocessFlags["STDERR_SILENCE"] = 32] = "STDERR_SILENCE";
     /**
      * merge the stderr of the spawned
-     * process with whatever the stdout happens to be.  This is a good way
-     * of directing both streams to a common log file, for example.
+     *   process with whatever the stdout happens to be.  This is a good way
+     *   of directing both streams to a common log file, for example.
      */
     SubprocessFlags[SubprocessFlags["STDERR_MERGE"] = 64] = "STDERR_MERGE";
     /**
      * spawned processes will inherit the
-     * file descriptors of their parent, unless those descriptors have
-     * been explicitly marked as close-on-exec.  This flag has no effect
-     * over the "standard" file descriptors (stdin, stdout, stderr).
+     *   file descriptors of their parent, unless those descriptors have
+     *   been explicitly marked as close-on-exec.  This flag has no effect
+     *   over the "standard" file descriptors (stdin, stdout, stderr).
      */
     SubprocessFlags[SubprocessFlags["INHERIT_FDS"] = 128] = "INHERIT_FDS";
     /**
      * if path searching is
-     * needed when spawning the subprocess, use the `PATH` in the launcher
-     * environment. (Since: 2.72)
+     *   needed when spawning the subprocess, use the `PATH` in the launcher
+     *   environment. (Since: 2.72)
      */
     SubprocessFlags[SubprocessFlags["SEARCH_PATH_FROM_ENVP"] = 256] = "SEARCH_PATH_FROM_ENVP";
 })(SubprocessFlags || (SubprocessFlags = {}));
@@ -1898,39 +1888,39 @@ export var TlsCertificateFlags;
     TlsCertificateFlags[TlsCertificateFlags["NO_FLAGS"] = 0] = "NO_FLAGS";
     /**
      * The signing certificate authority is
-     * not known.
+     *   not known.
      */
     TlsCertificateFlags[TlsCertificateFlags["UNKNOWN_CA"] = 1] = "UNKNOWN_CA";
     /**
      * The certificate does not match the
-     * expected identity of the site that it was retrieved from.
+     *   expected identity of the site that it was retrieved from.
      */
     TlsCertificateFlags[TlsCertificateFlags["BAD_IDENTITY"] = 2] = "BAD_IDENTITY";
     /**
      * The certificate's activation time
-     * is still in the future
+     *   is still in the future
      */
     TlsCertificateFlags[TlsCertificateFlags["NOT_ACTIVATED"] = 4] = "NOT_ACTIVATED";
     /** The certificate has expired */
     TlsCertificateFlags[TlsCertificateFlags["EXPIRED"] = 8] = "EXPIRED";
     /**
      * The certificate has been revoked
-     * according to the #GTlsConnection's certificate revocation list.
+     *   according to the #GTlsConnection's certificate revocation list.
      */
     TlsCertificateFlags[TlsCertificateFlags["REVOKED"] = 16] = "REVOKED";
     /**
      * The certificate's algorithm is
-     * considered insecure.
+     *   considered insecure.
      */
     TlsCertificateFlags[TlsCertificateFlags["INSECURE"] = 32] = "INSECURE";
     /**
      * Some other error occurred validating
-     * the certificate
+     *   the certificate
      */
     TlsCertificateFlags[TlsCertificateFlags["GENERIC_ERROR"] = 64] = "GENERIC_ERROR";
     /**
      * the combination of all of the above
-     * flags
+     *   flags
      */
     TlsCertificateFlags[TlsCertificateFlags["VALIDATE_ALL"] = 127] = "VALIDATE_ALL";
 })(TlsCertificateFlags || (TlsCertificateFlags = {}));
@@ -1949,27 +1939,27 @@ export var TlsPasswordFlags;
     TlsPasswordFlags[TlsPasswordFlags["RETRY"] = 2] = "RETRY";
     /**
      * Hint to the user that the password has been
-     * wrong many times, and the user may not have many chances left.
+     *    wrong many times, and the user may not have many chances left.
      */
     TlsPasswordFlags[TlsPasswordFlags["MANY_TRIES"] = 4] = "MANY_TRIES";
     /**
      * Hint to the user that this is the last try to get
-     * this password right.
+     *    this password right.
      */
     TlsPasswordFlags[TlsPasswordFlags["FINAL_TRY"] = 8] = "FINAL_TRY";
     /**
      * For PKCS #11, the user PIN is required.
-     * Since: 2.70.
+     *    Since: 2.70.
      */
     TlsPasswordFlags[TlsPasswordFlags["PKCS11_USER"] = 16] = "PKCS11_USER";
     /**
      * For PKCS #11, the security officer
-     * PIN is required. Since: 2.70.
+     *    PIN is required. Since: 2.70.
      */
     TlsPasswordFlags[TlsPasswordFlags["PKCS11_SECURITY_OFFICER"] = 32] = "PKCS11_SECURITY_OFFICER";
     /**
      * For PKCS #11, the context-specific
-     * PIN is required. Since: 2.70.
+     *    PIN is required. Since: 2.70.
      */
     TlsPasswordFlags[TlsPasswordFlags["PKCS11_CONTEXT_SPECIFIC"] = 64] = "PKCS11_CONTEXT_SPECIFIC";
 })(TlsPasswordFlags || (TlsPasswordFlags = {}));