@gtkx/ffi 0.10.5 → 0.11.0

package/dist/generated/gsk/enums.d.ts

@@ -12,17 +12,17 @@ export declare enum BlendMode {
     DEFAULT = 0,
     /**
      * The source color is multiplied by the destination
-     * and replaces the destination
+     *   and replaces the destination
      */
     MULTIPLY = 1,
     /**
      * Multiplies the complements of the destination and source
-     * color values, then complements the result.
+     *   color values, then complements the result.
      */
     SCREEN = 2,
     /**
      * Multiplies or screens the colors, depending on the
-     * destination color value. This is the inverse of hard-list
+     *   destination color value. This is the inverse of hard-list
      */
     OVERLAY = 3,
     /** Selects the darker of the destination and source colors */
@@ -41,21 +41,13 @@ export declare enum BlendMode {
     DIFFERENCE = 10,
     /** Produces an effect similar to that of the difference mode but lower in contrast */
     EXCLUSION = 11,
-    /**
-     * Creates a color with the hue and saturation of the source color and the luminosity of the destination color
-     */
+    /** Creates a color with the hue and saturation of the source color and the luminosity of the destination color */
     COLOR = 12,
-    /**
-     * Creates a color with the hue of the source color and the saturation and luminosity of the destination color
-     */
+    /** Creates a color with the hue of the source color and the saturation and luminosity of the destination color */
     HUE = 13,
-    /**
-     * Creates a color with the saturation of the source color and the hue and luminosity of the destination color
-     */
+    /** Creates a color with the saturation of the source color and the hue and luminosity of the destination color */
     SATURATION = 14,
-    /**
-     * Creates a color with the luminosity of the source color and the hue and saturation of the destination color
-     */
+    /** Creates a color with the luminosity of the source color and the hue and saturation of the destination color */
     LUMINOSITY = 15
 }
 /** The corner indices used by `GskRoundedRect`. */
@@ -86,17 +78,17 @@ export declare enum Corner {
 export declare enum FillRule {
     /**
      * If the path crosses the ray from
-     * left-to-right, counts +1. If the path crosses the ray
-     * from right to left, counts -1. (Left and right are determined
-     * from the perspective of looking along the ray from the starting
-     * point.) If the total count is non-zero, the point will be filled.
+     *   left-to-right, counts +1. If the path crosses the ray
+     *   from right to left, counts -1. (Left and right are determined
+     *   from the perspective of looking along the ray from the starting
+     *   point.) If the total count is non-zero, the point will be filled.
      */
     WINDING = 0,
     /**
      * Counts the total number of
-     * intersections, without regard to the orientation of the contour. If
-     * the total number of intersections is odd, the point will be
-     * filled.
+     *   intersections, without regard to the orientation of the contour. If
+     *   the total number of intersections is odd, the point will be
+     *   filled.
      */
     EVEN_ODD = 1
 }
@@ -133,24 +125,24 @@ export declare enum GLUniformType {
  * New entries may be added in future versions.
  *
  * <figure>
- * ![Line Cap Styles](https://docs.gtk.org/gsk4/caps-light.png)
- * <figcaption>GSK_LINE_CAP_BUTT, GSK_LINE_CAP_ROUND, GSK_LINE_CAP_SQUARE</figcaption>
+ *   ![Line Cap Styles](https://docs.gtk.org/gsk4/caps-light.png)
+ *   <figcaption>GSK_LINE_CAP_BUTT, GSK_LINE_CAP_ROUND, GSK_LINE_CAP_SQUARE</figcaption>
  * </figure>
  */
 export declare enum LineCap {
     /**
      * Start and stop the line exactly at the start
-     * and end point
+     *   and end point
      */
     BUTT = 0,
     /**
      * Use a round ending, the center of the circle
-     * is the start or end point
+     *   is the start or end point
      */
     ROUND = 1,
     /**
      * use squared ending, the center of the square
-     * is the start or end point
+     *   is the start or end point
      */
     SQUARE = 2
 }
@@ -162,8 +154,8 @@ export declare enum LineCap {
  * New entries may be added in future versions.
  *
  * <figure>
- * ![Line Join Styles](https://docs.gtk.org/gsk4/join-light.png)
- * <figcaption>GSK_LINE_JOINT_MITER, GSK_LINE_JOINT_ROUND, GSK_LINE_JOIN_BEVEL</figcaption>
+ *   ![Line Join Styles](https://docs.gtk.org/gsk4/join-light.png)
+ *   <figcaption>GSK_LINE_JOINT_MITER, GSK_LINE_JOINT_ROUND, GSK_LINE_JOIN_BEVEL</figcaption>
  * </figure>
  */
 export declare enum LineJoin {
@@ -171,12 +163,12 @@ export declare enum LineJoin {
     MITER = 0,
     /**
      * Use a round join, the center of the circle is
-     * the join point
+     *   the join point
      */
     ROUND = 1,
     /**
      * use a cut-off join, the join is cut off at half
-     * the line width from the joint point
+     *   the line width from the joint point
      */
     BEVEL = 2
 }
@@ -188,12 +180,12 @@ export declare enum MaskMode {
     INVERTED_ALPHA = 1,
     /**
      * Use the luminance of the mask,
-     * multiplied by mask alpha
+     *     multiplied by mask alpha
      */
     LUMINANCE = 2,
     /**
      * Use the inverted luminance of the mask,
-     * multiplied by mask alpha
+     *     multiplied by mask alpha
      */
     INVERTED_LUMINANCE = 3
 }
@@ -209,22 +201,22 @@ export declare enum MaskMode {
 export declare enum PathDirection {
     /**
      * The tangent in path direction of the incoming side
-     * of the path
+     *   of the path
      */
     FROM_START = 0,
     /**
      * The tangent against path direction of the incoming side
-     * of the path
+     *   of the path
      */
     TO_START = 1,
     /**
      * The tangent in path direction of the outgoing side
-     * of the path
+     *   of the path
      */
     TO_END = 2,
     /**
      * The tangent against path direction of the outgoing
-     * side of the path
+     *   side of the path
      */
     FROM_END = 3
 }
@@ -237,7 +229,7 @@ export declare enum PathIntersection {
     NONE = 0,
     /**
      * A normal intersection, where the two paths
-     * cross each other
+     *   cross each other
      */
     NORMAL = 1,
     /** The start of a segment where the two paths coincide */
@@ -255,30 +247,30 @@ export declare enum PathOperation {
     MOVE = 0,
     /**
      * A close operation ending the current contour with a line back
-     * to the starting point. Two points describe the start and end of the line.
+     *   to the starting point. Two points describe the start and end of the line.
      */
     CLOSE = 1,
     /**
      * A line-to operation, with 2 points describing the start and
-     * end point of a straight line.
+     *   end point of a straight line.
      */
     LINE = 2,
     /**
      * A curve-to operation describing a quadratic Bézier curve
-     * with 3 points describing the start point, the control point and the end
-     * point of the curve.
+     *   with 3 points describing the start point, the control point and the end
+     *   point of the curve.
      */
     QUAD = 3,
     /**
      * A curve-to operation describing a cubic Bézier curve with 4
-     * points describing the start point, the two control points and the end point
-     * of the curve.
+     *   points describing the start point, the two control points and the end point
+     *   of the curve.
      */
     CUBIC = 4,
     /**
      * A rational quadratic Bézier curve with 3 points describing
-     * the start point, control point and end point of the curve. A weight for the
-     * curve will be passed, too.
+     *   the start point, control point and end point of the curve. A weight for the
+     *   curve will be passed, too.
      */
     CONIC = 5
 }
@@ -362,8 +354,8 @@ export declare enum ScalingFilter {
     NEAREST = 1,
     /**
      * linear interpolation along each axis,
-     * plus mipmap generation, with linear interpolation along the mipmap
-     * levels
+     *   plus mipmap generation, with linear interpolation along the mipmap
+     *   levels
      */
     TRILINEAR = 2
 }
@@ -373,12 +365,12 @@ export declare enum SerializationError {
     UNSUPPORTED_FORMAT = 0,
     /**
      * The version of the data is not
-     * understood
+     *   understood
      */
     UNSUPPORTED_VERSION = 1,
     /**
      * The given data may not exist in
-     * a proper serialization
+     *   a proper serialization
      */
     INVALID_DATA = 2
 }
@@ -397,29 +389,29 @@ export declare enum SerializationError {
 export declare enum TransformCategory {
     /**
      * The category of the matrix has not been
-     * determined.
+     *   determined.
      */
     UNKNOWN = 0,
     /**
      * Analyzing the matrix concluded that it does
-     * not fit in any other category.
+     *   not fit in any other category.
      */
     ANY = 1,
     /**
      * The matrix is a 3D matrix. This means that
-     * the w column (the last column) has the values (0, 0, 0, 1).
+     *   the w column (the last column) has the values (0, 0, 0, 1).
      */
     _3D = 2,
     /**
      * The matrix is a 2D matrix. This is equivalent
-     * to graphene_matrix_is_2d() returning %TRUE. In particular, this
-     * means that Cairo can deal with the matrix.
+     *   to graphene_matrix_is_2d() returning %TRUE. In particular, this
+     *   means that Cairo can deal with the matrix.
      */
     _2D = 3,
     /**
      * The matrix is a combination of 2D scale
-     * and 2D translation operations. In particular, this means that any
-     * rectangle can be transformed exactly using this matrix.
+     *   and 2D translation operations. In particular, this means that any
+     *   rectangle can be transformed exactly using this matrix.
      */
     _2D_AFFINE = 4,
     /** The matrix is a 2D translation. */

package/dist/generated/gsk/enums.js

@@ -13,17 +13,17 @@ export var BlendMode;
     BlendMode[BlendMode["DEFAULT"] = 0] = "DEFAULT";
     /**
      * The source color is multiplied by the destination
-     * and replaces the destination
+     *   and replaces the destination
      */
     BlendMode[BlendMode["MULTIPLY"] = 1] = "MULTIPLY";
     /**
      * Multiplies the complements of the destination and source
-     * color values, then complements the result.
+     *   color values, then complements the result.
      */
     BlendMode[BlendMode["SCREEN"] = 2] = "SCREEN";
     /**
      * Multiplies or screens the colors, depending on the
-     * destination color value. This is the inverse of hard-list
+     *   destination color value. This is the inverse of hard-list
      */
     BlendMode[BlendMode["OVERLAY"] = 3] = "OVERLAY";
     /** Selects the darker of the destination and source colors */
@@ -42,21 +42,13 @@ export var BlendMode;
     BlendMode[BlendMode["DIFFERENCE"] = 10] = "DIFFERENCE";
     /** Produces an effect similar to that of the difference mode but lower in contrast */
     BlendMode[BlendMode["EXCLUSION"] = 11] = "EXCLUSION";
-    /**
-     * Creates a color with the hue and saturation of the source color and the luminosity of the destination color
-     */
+    /** Creates a color with the hue and saturation of the source color and the luminosity of the destination color */
     BlendMode[BlendMode["COLOR"] = 12] = "COLOR";
-    /**
-     * Creates a color with the hue of the source color and the saturation and luminosity of the destination color
-     */
+    /** Creates a color with the hue of the source color and the saturation and luminosity of the destination color */
     BlendMode[BlendMode["HUE"] = 13] = "HUE";
-    /**
-     * Creates a color with the saturation of the source color and the hue and luminosity of the destination color
-     */
+    /** Creates a color with the saturation of the source color and the hue and luminosity of the destination color */
     BlendMode[BlendMode["SATURATION"] = 14] = "SATURATION";
-    /**
-     * Creates a color with the luminosity of the source color and the hue and saturation of the destination color
-     */
+    /** Creates a color with the luminosity of the source color and the hue and saturation of the destination color */
     BlendMode[BlendMode["LUMINOSITY"] = 15] = "LUMINOSITY";
 })(BlendMode || (BlendMode = {}));
 /** The corner indices used by `GskRoundedRect`. */
@@ -89,17 +81,17 @@ export var FillRule;
 (function (FillRule) {
     /**
      * If the path crosses the ray from
-     * left-to-right, counts +1. If the path crosses the ray
-     * from right to left, counts -1. (Left and right are determined
-     * from the perspective of looking along the ray from the starting
-     * point.) If the total count is non-zero, the point will be filled.
+     *   left-to-right, counts +1. If the path crosses the ray
+     *   from right to left, counts -1. (Left and right are determined
+     *   from the perspective of looking along the ray from the starting
+     *   point.) If the total count is non-zero, the point will be filled.
      */
     FillRule[FillRule["WINDING"] = 0] = "WINDING";
     /**
      * Counts the total number of
-     * intersections, without regard to the orientation of the contour. If
-     * the total number of intersections is odd, the point will be
-     * filled.
+     *   intersections, without regard to the orientation of the contour. If
+     *   the total number of intersections is odd, the point will be
+     *   filled.
      */
     FillRule[FillRule["EVEN_ODD"] = 1] = "EVEN_ODD";
 })(FillRule || (FillRule = {}));
@@ -137,25 +129,25 @@ export var GLUniformType;
  * New entries may be added in future versions.
  *
  * <figure>
- * ![Line Cap Styles](https://docs.gtk.org/gsk4/caps-light.png)
- * <figcaption>GSK_LINE_CAP_BUTT, GSK_LINE_CAP_ROUND, GSK_LINE_CAP_SQUARE</figcaption>
+ *   ![Line Cap Styles](https://docs.gtk.org/gsk4/caps-light.png)
+ *   <figcaption>GSK_LINE_CAP_BUTT, GSK_LINE_CAP_ROUND, GSK_LINE_CAP_SQUARE</figcaption>
  * </figure>
  */
 export var LineCap;
 (function (LineCap) {
     /**
      * Start and stop the line exactly at the start
-     * and end point
+     *   and end point
      */
     LineCap[LineCap["BUTT"] = 0] = "BUTT";
     /**
      * Use a round ending, the center of the circle
-     * is the start or end point
+     *   is the start or end point
      */
     LineCap[LineCap["ROUND"] = 1] = "ROUND";
     /**
      * use squared ending, the center of the square
-     * is the start or end point
+     *   is the start or end point
      */
     LineCap[LineCap["SQUARE"] = 2] = "SQUARE";
 })(LineCap || (LineCap = {}));
@@ -167,8 +159,8 @@ export var LineCap;
  * New entries may be added in future versions.
  *
  * <figure>
- * ![Line Join Styles](https://docs.gtk.org/gsk4/join-light.png)
- * <figcaption>GSK_LINE_JOINT_MITER, GSK_LINE_JOINT_ROUND, GSK_LINE_JOIN_BEVEL</figcaption>
+ *   ![Line Join Styles](https://docs.gtk.org/gsk4/join-light.png)
+ *   <figcaption>GSK_LINE_JOINT_MITER, GSK_LINE_JOINT_ROUND, GSK_LINE_JOIN_BEVEL</figcaption>
  * </figure>
  */
 export var LineJoin;
@@ -177,12 +169,12 @@ export var LineJoin;
     LineJoin[LineJoin["MITER"] = 0] = "MITER";
     /**
      * Use a round join, the center of the circle is
-     * the join point
+     *   the join point
      */
     LineJoin[LineJoin["ROUND"] = 1] = "ROUND";
     /**
      * use a cut-off join, the join is cut off at half
-     * the line width from the joint point
+     *   the line width from the joint point
      */
     LineJoin[LineJoin["BEVEL"] = 2] = "BEVEL";
 })(LineJoin || (LineJoin = {}));
@@ -195,12 +187,12 @@ export var MaskMode;
     MaskMode[MaskMode["INVERTED_ALPHA"] = 1] = "INVERTED_ALPHA";
     /**
      * Use the luminance of the mask,
-     * multiplied by mask alpha
+     *     multiplied by mask alpha
      */
     MaskMode[MaskMode["LUMINANCE"] = 2] = "LUMINANCE";
     /**
      * Use the inverted luminance of the mask,
-     * multiplied by mask alpha
+     *     multiplied by mask alpha
      */
     MaskMode[MaskMode["INVERTED_LUMINANCE"] = 3] = "INVERTED_LUMINANCE";
 })(MaskMode || (MaskMode = {}));
@@ -217,22 +209,22 @@ export var PathDirection;
 (function (PathDirection) {
     /**
      * The tangent in path direction of the incoming side
-     * of the path
+     *   of the path
      */
     PathDirection[PathDirection["FROM_START"] = 0] = "FROM_START";
     /**
      * The tangent against path direction of the incoming side
-     * of the path
+     *   of the path
      */
     PathDirection[PathDirection["TO_START"] = 1] = "TO_START";
     /**
      * The tangent in path direction of the outgoing side
-     * of the path
+     *   of the path
      */
     PathDirection[PathDirection["TO_END"] = 2] = "TO_END";
     /**
      * The tangent against path direction of the outgoing
-     * side of the path
+     *   side of the path
      */
     PathDirection[PathDirection["FROM_END"] = 3] = "FROM_END";
 })(PathDirection || (PathDirection = {}));
@@ -246,7 +238,7 @@ export var PathIntersection;
     PathIntersection[PathIntersection["NONE"] = 0] = "NONE";
     /**
      * A normal intersection, where the two paths
-     * cross each other
+     *   cross each other
      */
     PathIntersection[PathIntersection["NORMAL"] = 1] = "NORMAL";
     /** The start of a segment where the two paths coincide */
@@ -265,30 +257,30 @@ export var PathOperation;
     PathOperation[PathOperation["MOVE"] = 0] = "MOVE";
     /**
      * A close operation ending the current contour with a line back
-     * to the starting point. Two points describe the start and end of the line.
+     *   to the starting point. Two points describe the start and end of the line.
      */
     PathOperation[PathOperation["CLOSE"] = 1] = "CLOSE";
     /**
      * A line-to operation, with 2 points describing the start and
-     * end point of a straight line.
+     *   end point of a straight line.
      */
     PathOperation[PathOperation["LINE"] = 2] = "LINE";
     /**
      * A curve-to operation describing a quadratic Bézier curve
-     * with 3 points describing the start point, the control point and the end
-     * point of the curve.
+     *   with 3 points describing the start point, the control point and the end
+     *   point of the curve.
      */
     PathOperation[PathOperation["QUAD"] = 3] = "QUAD";
     /**
      * A curve-to operation describing a cubic Bézier curve with 4
-     * points describing the start point, the two control points and the end point
-     * of the curve.
+     *   points describing the start point, the two control points and the end point
+     *   of the curve.
      */
     PathOperation[PathOperation["CUBIC"] = 4] = "CUBIC";
     /**
      * A rational quadratic Bézier curve with 3 points describing
-     * the start point, control point and end point of the curve. A weight for the
-     * curve will be passed, too.
+     *   the start point, control point and end point of the curve. A weight for the
+     *   curve will be passed, too.
      */
     PathOperation[PathOperation["CONIC"] = 5] = "CONIC";
 })(PathOperation || (PathOperation = {}));
@@ -374,8 +366,8 @@ export var ScalingFilter;
     ScalingFilter[ScalingFilter["NEAREST"] = 1] = "NEAREST";
     /**
      * linear interpolation along each axis,
-     * plus mipmap generation, with linear interpolation along the mipmap
-     * levels
+     *   plus mipmap generation, with linear interpolation along the mipmap
+     *   levels
      */
     ScalingFilter[ScalingFilter["TRILINEAR"] = 2] = "TRILINEAR";
 })(ScalingFilter || (ScalingFilter = {}));
@@ -386,12 +378,12 @@ export var SerializationError;
     SerializationError[SerializationError["UNSUPPORTED_FORMAT"] = 0] = "UNSUPPORTED_FORMAT";
     /**
      * The version of the data is not
-     * understood
+     *   understood
      */
     SerializationError[SerializationError["UNSUPPORTED_VERSION"] = 1] = "UNSUPPORTED_VERSION";
     /**
      * The given data may not exist in
-     * a proper serialization
+     *   a proper serialization
      */
     SerializationError[SerializationError["INVALID_DATA"] = 2] = "INVALID_DATA";
 })(SerializationError || (SerializationError = {}));
@@ -411,29 +403,29 @@ export var TransformCategory;
 (function (TransformCategory) {
     /**
      * The category of the matrix has not been
-     * determined.
+     *   determined.
      */
     TransformCategory[TransformCategory["UNKNOWN"] = 0] = "UNKNOWN";
     /**
      * Analyzing the matrix concluded that it does
-     * not fit in any other category.
+     *   not fit in any other category.
      */
     TransformCategory[TransformCategory["ANY"] = 1] = "ANY";
     /**
      * The matrix is a 3D matrix. This means that
-     * the w column (the last column) has the values (0, 0, 0, 1).
+     *   the w column (the last column) has the values (0, 0, 0, 1).
      */
     TransformCategory[TransformCategory["_3D"] = 2] = "_3D";
     /**
      * The matrix is a 2D matrix. This is equivalent
-     * to graphene_matrix_is_2d() returning %TRUE. In particular, this
-     * means that Cairo can deal with the matrix.
+     *   to graphene_matrix_is_2d() returning %TRUE. In particular, this
+     *   means that Cairo can deal with the matrix.
      */
     TransformCategory[TransformCategory["_2D"] = 3] = "_2D";
     /**
      * The matrix is a combination of 2D scale
-     * and 2D translation operations. In particular, this means that any
-     * rectangle can be transformed exactly using this matrix.
+     *   and 2D translation operations. In particular, this means that any
+     *   rectangle can be transformed exactly using this matrix.
      */
     TransformCategory[TransformCategory["_2D_AFFINE"] = 4] = "_2D_AFFINE";
     /** The matrix is a 2D translation. */

package/dist/generated/gsk/fill-node.d.ts

@@ -11,18 +11,11 @@ export declare class FillNode extends RenderNode {
     /**
      * Creates a `GskRenderNode` that will fill the `child` in the area
      * given by `path` and `fill_rule`.
-     * @param child - The node to fill the area with
-     * @param path - The path describing the area to fill
-     * @param fillRule - The fill rule to use
      */
     constructor(child: RenderNode, path: Path, fillRule: FillRule);
-    /**
-     * Gets the child node that is getting drawn by the given `node`.
-     */
+    /** Gets the child node that is getting drawn by the given `node`. */
     getChild(): RenderNode;
-    /**
-     * Retrieves the fill rule used to determine how the path is filled.
-     */
+    /** Retrieves the fill rule used to determine how the path is filled. */
     getFillRule(): FillRule;
     /**
      * Retrieves the path used to describe the area filled with the contents of