@gtkx/ffi 0.1.45 → 0.1.46

package/dist/generated/gio/socket.js

@@ -5,10 +5,98 @@ import { SocketAddress } from "./socket-address.js";
 import { SocketConnection } from "./socket-connection.js";
 import * as GLib from "../glib/index.js";
 import * as GObject from "../gobject/index.js";
+/**
+ * A `GSocket` is a low-level networking primitive. It is a more or less
+ * direct mapping of the BSD socket API in a portable GObject based API.
+ * It supports both the UNIX socket implementations and winsock2 on Windows.
+ *
+ * `GSocket` is the platform independent base upon which the higher level
+ * network primitives are based. Applications are not typically meant to
+ * use it directly, but rather through classes like [class@Gio.SocketClient],
+ * [class@Gio.SocketService] and [class@Gio.SocketConnection]. However there may
+ * be cases where direct use of `GSocket` is useful.
+ *
+ * `GSocket` implements the [iface@Gio.Initable] interface, so if it is manually
+ * constructed by e.g. [ctor@GObject.Object.new] you must call
+ * [method@Gio.Initable.init] and check the results before using the object.
+ * This is done automatically in [ctor@Gio.Socket.new] and
+ * [ctor@Gio.Socket.new_from_fd], so these functions can return `NULL`.
+ *
+ * Sockets operate in two general modes, blocking or non-blocking. When
+ * in blocking mode all operations (which don’t take an explicit blocking
+ * parameter) block until the requested operation
+ * is finished or there is an error. In non-blocking mode all calls that
+ * would block return immediately with a `G_IO_ERROR_WOULD_BLOCK` error.
+ * To know when a call would successfully run you can call
+ * [method@Gio.Socket.condition_check], or [method@Gio.Socket.condition_wait].
+ * You can also use [method@Gio.Socket.create_source] and attach it to a
+ * [type@GLib.MainContext] to get callbacks when I/O is possible.
+ * Note that all sockets are always set to non blocking mode in the system, and
+ * blocking mode is emulated in `GSocket`.
+ *
+ * When working in non-blocking mode applications should always be able to
+ * handle getting a `G_IO_ERROR_WOULD_BLOCK` error even when some other
+ * function said that I/O was possible. This can easily happen in case
+ * of a race condition in the application, but it can also happen for other
+ * reasons. For instance, on Windows a socket is always seen as writable
+ * until a write returns `G_IO_ERROR_WOULD_BLOCK`.
+ *
+ * `GSocket`s can be either connection oriented or datagram based.
+ * For connection oriented types you must first establish a connection by
+ * either connecting to an address or accepting a connection from another
+ * address. For connectionless socket types the target/source address is
+ * specified or received in each I/O operation.
+ *
+ * All socket file descriptors are set to be close-on-exec.
+ *
+ * Note that creating a `GSocket` causes the signal `SIGPIPE` to be
+ * ignored for the remainder of the program. If you are writing a
+ * command-line utility that uses `GSocket`, you may need to take into
+ * account the fact that your program will not automatically be killed
+ * if it tries to write to `stdout` after it has been closed.
+ *
+ * Like most other APIs in GLib, `GSocket` is not inherently thread safe. To use
+ * a `GSocket` concurrently from multiple threads, you must implement your own
+ * locking.
+ *
+ * ## Nagle’s algorithm
+ *
+ * Since GLib 2.80, `GSocket` will automatically set the `TCP_NODELAY` option on
+ * all `G_SOCKET_TYPE_STREAM` sockets. This disables
+ * [Nagle’s algorithm](https://en.wikipedia.org/wiki/Nagle%27s_algorithm) as it
+ * typically does more harm than good on modern networks.
+ *
+ * If your application needs Nagle’s algorithm enabled, call
+ * [method@Gio.Socket.set_option] after constructing a `GSocket` to enable it:
+ * ```c
+ * socket = g_socket_new (…, G_SOCKET_TYPE_STREAM, …);
+ * if (socket != NULL)
+ * {
+ * g_socket_set_option (socket, IPPROTO_TCP, TCP_NODELAY, FALSE, &local_error);
+ * // handle error if needed
+ * }
+ * ```
+ */
 export class Socket extends GObject.GObject {
     constructor(...args) {
         super(...args);
     }
+    /**
+     * Creates a new #GSocket from a native file descriptor
+     * or winsock SOCKET handle.
+     *
+     * This reads all the settings from the file descriptor so that
+     * all properties should work. Note that the file descriptor
+     * will be set to non-blocking mode, independent on the blocking
+     * mode of the #GSocket.
+     *
+     * On success, the returned #GSocket takes ownership of @fd. On failure, the
+     * caller must close `fd` themselves.
+     *
+     * Since GLib 2.46, it is no longer a fatal error to call this on a non-socket
+     * descriptor.  Instead, a GError will be set with code %G_IO_ERROR_FAILED
+     * @param fd - a native socket file descriptor.
+     */
     static newFromFd(fd) {
         const ptr = call("libgio-2.0.so.0", "g_socket_new_from_fd", [
             {
@@ -35,6 +123,19 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "gobject", borrowed: false });
     }
+    /**
+     * Accept incoming connections on a connection-based socket. This removes
+     * the first outstanding connection request from the listening socket and
+     * creates a #GSocket object for it.
+     *
+     * The `socket` must be bound to a local address with g_socket_bind() and
+     * must be listening for incoming connections (g_socket_listen()).
+     *
+     * If there are no outstanding connections then the operation will block
+     * or return %G_IO_ERROR_WOULD_BLOCK if non-blocking I/O is enabled.
+     * To be notified of an incoming connection, wait for the %G_IO_IN condition.
+     * @param cancellable - a %GCancellable or %NULL
+     */
     accept(cancellable) {
         const error = { value: null };
         const ptr = call("libgio-2.0.so.0", "g_socket_accept", [
@@ -64,6 +165,33 @@ export class Socket extends GObject.GObject {
         }
         return getObject(ptr, Socket);
     }
+    /**
+     * When a socket is created it is attached to an address family, but it
+     * doesn't have an address in this family. g_socket_bind() assigns the
+     * address (sometimes called name) of the socket.
+     *
+     * It is generally required to bind to a local address before you can
+     * receive connections. (See g_socket_listen() and g_socket_accept() ).
+     * In certain situations, you may also want to bind a socket that will be
+     * used to initiate connections, though this is not normally required.
+     *
+     * If `socket` is a TCP socket, then `allow_reuse` controls the setting
+     * of the `SO_REUSEADDR` socket option; normally it should be %TRUE for
+     * server sockets (sockets that you will eventually call
+     * g_socket_accept() on), and %FALSE for client sockets. (Failing to
+     * set this flag on a server socket may cause g_socket_bind() to return
+     * %G_IO_ERROR_ADDRESS_IN_USE if the server program is stopped and then
+     * immediately restarted.)
+     *
+     * If `socket` is a UDP socket, then `allow_reuse` determines whether or
+     * not other UDP sockets can be bound to the same address at the same
+     * time. In particular, you can have several UDP sockets bound to the
+     * same address, and they will all receive all of the multicast and
+     * broadcast packets sent to that address. (The behavior of unicast
+     * UDP packets to an address with multiple listeners is not defined.)
+     * @param address - a #GSocketAddress specifying the local address.
+     * @param allowReuse - whether to allow reusing this address
+     */
     bind(address, allowReuse) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_bind", [
@@ -96,6 +224,11 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Checks and resets the pending connect error for the socket.
+     * This is used to check for errors when g_socket_connect() is
+     * used in non-blocking mode.
+     */
     checkConnectResult() {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_check_connect_result", [
@@ -120,6 +253,37 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Closes the socket, shutting down any active connection.
+     *
+     * Closing a socket does not wait for all outstanding I/O operations
+     * to finish, so the caller should not rely on them to be guaranteed
+     * to complete even if the close returns with no error.
+     *
+     * Once the socket is closed, all other operations will return
+     * %G_IO_ERROR_CLOSED. Closing a socket multiple times will not
+     * return an error.
+     *
+     * Sockets will be automatically closed when the last reference
+     * is dropped, but you might want to call this function to make sure
+     * resources are released as early as possible.
+     *
+     * Beware that due to the way that TCP works, it is possible for
+     * recently-sent data to be lost if either you close a socket while the
+     * %G_IO_IN condition is set, or else if the remote connection tries to
+     * send something to you after you close the socket but before it has
+     * finished reading all of the data you sent. There is no easy generic
+     * way to avoid this problem; the easiest fix is to design the network
+     * protocol such that the client will never send data "out of turn".
+     * Another solution is for the server to half-close the connection by
+     * calling g_socket_shutdown() with only the `shutdown_write` flag set,
+     * and then wait for the client to notice this and close its side of the
+     * connection, after which the server can safely call g_socket_close().
+     * (This is what #GTcpConnection does if you call
+     * g_tcp_connection_set_graceful_disconnect(). But of course, this
+     * only works if the client will close its connection after the server
+     * does.)
+     */
     close() {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_close", [
@@ -144,6 +308,26 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Checks on the readiness of `socket` to perform operations.
+     * The operations specified in `condition` are checked for and masked
+     * against the currently-satisfied conditions on @socket. The result
+     * is returned.
+     *
+     * Note that on Windows, it is possible for an operation to return
+     * %G_IO_ERROR_WOULD_BLOCK even immediately after
+     * g_socket_condition_check() has claimed that the socket is ready for
+     * writing. Rather than calling g_socket_condition_check() and then
+     * writing to the socket if it succeeds, it is generally better to
+     * simply try writing to the socket right away, and try again later if
+     * the initial attempt returns %G_IO_ERROR_WOULD_BLOCK.
+     *
+     * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in condition;
+     * these conditions will always be set in the output if they are true.
+     *
+     * This call never blocks.
+     * @param condition - a #GIOCondition mask to check
+     */
     conditionCheck(condition) {
         return call("libgio-2.0.so.0", "g_socket_condition_check", [
             {
@@ -156,6 +340,27 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: false });
     }
+    /**
+     * Waits for up to `timeout_us` microseconds for `condition` to become true
+     * on @socket. If the condition is met, %TRUE is returned.
+     *
+     * If `cancellable` is cancelled before the condition is met, or if
+     * `timeout_us` (or the socket's #GSocket:timeout) is reached before the
+     * condition is met, then %FALSE is returned and @error, if non-%NULL,
+     * is set to the appropriate value (%G_IO_ERROR_CANCELLED or
+     * %G_IO_ERROR_TIMED_OUT).
+     *
+     * If you don't want a timeout, use g_socket_condition_wait().
+     * (Alternatively, you can pass -1 for @timeout_us.)
+     *
+     * Note that although `timeout_us` is in microseconds for consistency with
+     * other GLib APIs, this function actually only has millisecond
+     * resolution, and the behavior is undefined if `timeout_us` is not an
+     * exact number of milliseconds.
+     * @param condition - a #GIOCondition mask to wait for
+     * @param timeoutUs - the maximum time (in microseconds) to wait, or -1
+     * @param cancellable - a #GCancellable, or %NULL
+     */
     conditionTimedWait(condition, timeoutUs, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_condition_timed_wait", [
@@ -193,6 +398,20 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Waits for `condition` to become true on @socket. When the condition
+     * is met, %TRUE is returned.
+     *
+     * If `cancellable` is cancelled before the condition is met, or if the
+     * socket has a timeout set and it is reached before the condition is
+     * met, then %FALSE is returned and @error, if non-%NULL, is set to
+     * the appropriate value (%G_IO_ERROR_CANCELLED or
+     * %G_IO_ERROR_TIMED_OUT).
+     *
+     * See also g_socket_condition_timed_wait().
+     * @param condition - a #GIOCondition mask to wait for
+     * @param cancellable - a #GCancellable, or %NULL
+     */
     conditionWait(condition, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_condition_wait", [
@@ -226,6 +445,26 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Connect the socket to the specified remote address.
+     *
+     * For connection oriented socket this generally means we attempt to make
+     * a connection to the @address. For a connection-less socket it sets
+     * the default address for g_socket_send() and discards all incoming datagrams
+     * from other sources.
+     *
+     * Generally connection oriented sockets can only connect once, but
+     * connection-less sockets can connect multiple times to change the
+     * default address.
+     *
+     * If the connect call needs to do network I/O it will block, unless
+     * non-blocking I/O is enabled. Then %G_IO_ERROR_PENDING is returned
+     * and the user can be notified of the connection finishing by waiting
+     * for the G_IO_OUT condition. The result of the connection must then be
+     * checked with g_socket_check_connect_result().
+     * @param address - a #GSocketAddress specifying the remote address.
+     * @param cancellable - a %GCancellable or %NULL
+     */
     connectTo(address, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_connect", [
@@ -259,6 +498,10 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Creates a #GSocketConnection subclass of the right type for
+     * @socket.
+     */
     connectionFactoryCreateConnection() {
         const ptr = call("libgio-2.0.so.0", "g_socket_connection_factory_create_connection", [
             {
@@ -268,6 +511,20 @@ export class Socket extends GObject.GObject {
         ], { type: "gobject", borrowed: true });
         return getObject(ptr, SocketConnection);
     }
+    /**
+     * Get the amount of data pending in the OS input buffer, without blocking.
+     *
+     * If `socket` is a UDP or SCTP socket, this will return the size of
+     * just the next packet, even if additional packets are buffered after
+     * that one.
+     *
+     * Note that on Windows, this function is rather inefficient in the
+     * UDP case, and so if you know any plausible upper bound on the size
+     * of the incoming packet, it is better to just do a
+     * g_socket_receive() with a buffer of that size, rather than calling
+     * g_socket_get_available_bytes() first and then doing a receive of
+     * exactly the right size.
+     */
     getAvailableBytes() {
         return call("libgio-2.0.so.0", "g_socket_get_available_bytes", [
             {
@@ -276,6 +533,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 64, unsigned: false });
     }
+    /**
+     * Gets the blocking mode of the socket. For details on blocking I/O,
+     * see g_socket_set_blocking().
+     */
     getBlocking() {
         return call("libgio-2.0.so.0", "g_socket_get_blocking", [
             {
@@ -284,6 +545,11 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Gets the broadcast setting on @socket; if %TRUE,
+     * it is possible to send packets to broadcast
+     * addresses.
+     */
     getBroadcast() {
         return call("libgio-2.0.so.0", "g_socket_get_broadcast", [
             {
@@ -292,6 +558,28 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Returns the credentials of the foreign process connected to this
+     * socket, if any (e.g. it is only supported for %G_SOCKET_FAMILY_UNIX
+     * sockets).
+     *
+     * If this operation isn't supported on the OS, the method fails with
+     * the %G_IO_ERROR_NOT_SUPPORTED error. On Linux this is implemented
+     * by reading the %SO_PEERCRED option on the underlying socket.
+     *
+     * This method can be expected to be available on the following platforms:
+     *
+     * - Linux since GLib 2.26
+     * - OpenBSD since GLib 2.30
+     * - Solaris, Illumos and OpenSolaris since GLib 2.40
+     * - NetBSD since GLib 2.42
+     * - macOS, tvOS, iOS since GLib 2.66
+     *
+     * Other ways to obtain credentials from a foreign peer includes the
+     * #GUnixCredentialsMessage type and
+     * g_unix_connection_send_credentials() /
+     * g_unix_connection_receive_credentials() functions.
+     */
     getCredentials() {
         const error = { value: null };
         const ptr = call("libgio-2.0.so.0", "g_socket_get_credentials", [
@@ -316,6 +604,9 @@ export class Socket extends GObject.GObject {
         }
         return getObject(ptr, Credentials);
     }
+    /**
+     * Gets the socket family of the socket.
+     */
     getFamily() {
         return call("libgio-2.0.so.0", "g_socket_get_family", [
             {
@@ -324,6 +615,13 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: false });
     }
+    /**
+     * Returns the underlying OS socket object. On unix this
+     * is a socket file descriptor, and on Windows this is
+     * a Winsock2 SOCKET handle. This may be useful for
+     * doing platform specific or otherwise unusual operations
+     * on the socket.
+     */
     getFd() {
         return call("libgio-2.0.so.0", "g_socket_get_fd", [
             {
@@ -332,6 +630,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: false });
     }
+    /**
+     * Gets the keepalive mode of the socket. For details on this,
+     * see g_socket_set_keepalive().
+     */
     getKeepalive() {
         return call("libgio-2.0.so.0", "g_socket_get_keepalive", [
             {
@@ -340,6 +642,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Gets the listen backlog setting of the socket. For details on this,
+     * see g_socket_set_listen_backlog().
+     */
     getListenBacklog() {
         return call("libgio-2.0.so.0", "g_socket_get_listen_backlog", [
             {
@@ -348,6 +654,11 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: false });
     }
+    /**
+     * Try to get the local address of a bound socket. This is only
+     * useful if the socket has been bound to a local address,
+     * either explicitly or implicitly when connecting.
+     */
     getLocalAddress() {
         const error = { value: null };
         const ptr = call("libgio-2.0.so.0", "g_socket_get_local_address", [
@@ -372,6 +683,11 @@ export class Socket extends GObject.GObject {
         }
         return getObject(ptr, SocketAddress);
     }
+    /**
+     * Gets the multicast loopback setting on @socket; if %TRUE (the
+     * default), outgoing multicast packets will be looped back to
+     * multicast listeners on the same host.
+     */
     getMulticastLoopback() {
         return call("libgio-2.0.so.0", "g_socket_get_multicast_loopback", [
             {
@@ -380,6 +696,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Gets the multicast time-to-live setting on @socket; see
+     * g_socket_set_multicast_ttl() for more details.
+     */
     getMulticastTtl() {
         return call("libgio-2.0.so.0", "g_socket_get_multicast_ttl", [
             {
@@ -388,6 +708,24 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: true });
     }
+    /**
+     * Gets the value of an integer-valued option on @socket, as with
+     * getsockopt(). (If you need to fetch a  non-integer-valued option,
+     * you will need to call getsockopt() directly.)
+     *
+     * The `<gio/gnetworking.h>`
+     * header pulls in system headers that will define most of the
+     * standard/portable socket options. For unusual socket protocols or
+     * platform-dependent options, you may need to include additional
+     * headers.
+     *
+     * Note that even for socket options that are a single byte in size,
+     * `value` is still a pointer to a #gint variable, not a #guchar;
+     * g_socket_get_option() will handle the conversion internally.
+     * @param level - the "API level" of the option (eg, `SOL_SOCKET`)
+     * @param optname - the "name" of the option (eg, `SO_BROADCAST`)
+     * @param value - return location for the option value
+     */
     getOption(level, optname, value) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_get_option", [
@@ -427,6 +765,10 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Gets the socket protocol id the socket was created with.
+     * In case the protocol is unknown, -1 is returned.
+     */
     getProtocol() {
         return call("libgio-2.0.so.0", "g_socket_get_protocol", [
             {
@@ -435,6 +777,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: false });
     }
+    /**
+     * Try to get the remote address of a connected socket. This is only
+     * useful for connection oriented sockets that have been connected.
+     */
     getRemoteAddress() {
         const error = { value: null };
         const ptr = call("libgio-2.0.so.0", "g_socket_get_remote_address", [
@@ -459,6 +805,9 @@ export class Socket extends GObject.GObject {
         }
         return getObject(ptr, SocketAddress);
     }
+    /**
+     * Gets the socket type of the socket.
+     */
     getSocketType() {
         return call("libgio-2.0.so.0", "g_socket_get_socket_type", [
             {
@@ -467,6 +816,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: false });
     }
+    /**
+     * Gets the timeout setting of the socket. For details on this, see
+     * g_socket_set_timeout().
+     */
     getTimeout() {
         return call("libgio-2.0.so.0", "g_socket_get_timeout", [
             {
@@ -475,6 +828,10 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: true });
     }
+    /**
+     * Gets the unicast time-to-live setting on @socket; see
+     * g_socket_set_ttl() for more details.
+     */
     getTtl() {
         return call("libgio-2.0.so.0", "g_socket_get_ttl", [
             {
@@ -483,6 +840,9 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "int", size: 32, unsigned: true });
     }
+    /**
+     * Checks whether a socket is closed.
+     */
     isClosed() {
         return call("libgio-2.0.so.0", "g_socket_is_closed", [
             {
@@ -491,6 +851,15 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Check whether the socket is connected. This is only useful for
+     * connection-oriented sockets.
+     *
+     * If using g_socket_shutdown(), this function will return %TRUE until the
+     * socket has been shut down for reading and writing. If you do a non-blocking
+     * connect, this function will not return %TRUE until after you call
+     * g_socket_check_connect_result().
+     */
     isConnected() {
         return call("libgio-2.0.so.0", "g_socket_is_connected", [
             {
@@ -499,6 +868,25 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Registers `socket` to receive multicast messages sent to @group.
+     * `socket` must be a %G_SOCKET_TYPE_DATAGRAM socket, and must have
+     * been bound to an appropriate interface and port with
+     * g_socket_bind().
+     *
+     * If `iface` is %NULL, the system will automatically pick an interface
+     * to bind to based on @group.
+     *
+     * If `source_specific` is %TRUE, source-specific multicast as defined
+     * in RFC 4604 is used. Note that on older platforms this may fail
+     * with a %G_IO_ERROR_NOT_SUPPORTED error.
+     *
+     * To bind to a given source-specific multicast address, use
+     * g_socket_join_multicast_group_ssm() instead.
+     * @param group - a #GInetAddress specifying the group address to join.
+     * @param sourceSpecific - %TRUE if source-specific multicast should be used
+     * @param iface - Name of the interface to use, or %NULL
+     */
     joinMulticastGroup(group, sourceSpecific, iface) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_join_multicast_group", [
@@ -536,6 +924,26 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Registers `socket` to receive multicast messages sent to @group.
+     * `socket` must be a %G_SOCKET_TYPE_DATAGRAM socket, and must have
+     * been bound to an appropriate interface and port with
+     * g_socket_bind().
+     *
+     * If `iface` is %NULL, the system will automatically pick an interface
+     * to bind to based on @group.
+     *
+     * If `source_specific` is not %NULL, use source-specific multicast as
+     * defined in RFC 4604. Note that on older platforms this may fail
+     * with a %G_IO_ERROR_NOT_SUPPORTED error.
+     *
+     * Note that this function can be called multiple times for the same
+     * `group` with different `source_specific` in order to receive multicast
+     * packets from more than one source.
+     * @param group - a #GInetAddress specifying the group address to join.
+     * @param sourceSpecific - a #GInetAddress specifying the
+     * @param iface - Name of the interface to use, or %NULL
+     */
     joinMulticastGroupSsm(group, sourceSpecific, iface) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_join_multicast_group_ssm", [
@@ -574,6 +982,20 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Removes `socket` from the multicast group defined by @group, @iface,
+     * and `source_specific` (which must all have the same values they had
+     * when you joined the group).
+     *
+     * `socket` remains bound to its address and port, and can still receive
+     * unicast messages after calling this.
+     *
+     * To unbind to a given source-specific multicast address, use
+     * g_socket_leave_multicast_group_ssm() instead.
+     * @param group - a #GInetAddress specifying the group address to leave.
+     * @param sourceSpecific - %TRUE if source-specific multicast was used
+     * @param iface - Interface used
+     */
     leaveMulticastGroup(group, sourceSpecific, iface) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_leave_multicast_group", [
@@ -611,6 +1033,17 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Removes `socket` from the multicast group defined by @group, @iface,
+     * and `source_specific` (which must all have the same values they had
+     * when you joined the group).
+     *
+     * `socket` remains bound to its address and port, and can still receive
+     * unicast messages after calling this.
+     * @param group - a #GInetAddress specifying the group address to leave.
+     * @param sourceSpecific - a #GInetAddress specifying the
+     * @param iface - Name of the interface to use, or %NULL
+     */
     leaveMulticastGroupSsm(group, sourceSpecific, iface) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_leave_multicast_group_ssm", [
@@ -649,6 +1082,16 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Marks the socket as a server socket, i.e. a socket that is used
+     * to accept incoming requests using g_socket_accept().
+     *
+     * Before calling this the socket must be bound to a local address using
+     * g_socket_bind().
+     *
+     * To set the maximum amount of outstanding clients, use
+     * g_socket_set_listen_backlog().
+     */
     listen() {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_listen", [
@@ -673,6 +1116,34 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Receive data (up to `size` bytes) from a socket. This is mainly used by
+     * connection-oriented sockets; it is identical to g_socket_receive_from()
+     * with `address` set to %NULL.
+     *
+     * For %G_SOCKET_TYPE_DATAGRAM and %G_SOCKET_TYPE_SEQPACKET sockets,
+     * g_socket_receive() will always read either 0 or 1 complete messages from
+     * the socket. If the received message is too large to fit in @buffer, then
+     * the data beyond `size` bytes will be discarded, without any explicit
+     * indication that this has occurred.
+     *
+     * For %G_SOCKET_TYPE_STREAM sockets, g_socket_receive() can return any
+     * number of bytes, up to @size. If more than `size` bytes have been
+     * received, the additional data will be returned in future calls to
+     * g_socket_receive().
+     *
+     * If the socket is in blocking mode the call will block until there
+     * is some data to receive, the connection is closed, or there is an
+     * error. If there is no data available and the socket is in
+     * non-blocking mode, a %G_IO_ERROR_WOULD_BLOCK error will be
+     * returned. To be notified when data is available, wait for the
+     * %G_IO_IN condition.
+     *
+     * On error -1 is returned and `error` is set accordingly.
+     * @param buffer - a buffer to read data into (which should be at least `size` bytes long).
+     * @param size - the number of bytes you want to read from the socket
+     * @param cancellable - a %GCancellable or %NULL
+     */
     receive(buffer, size, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_receive", [
@@ -716,6 +1187,20 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Receives data (up to `size` bytes) from a socket.
+     *
+     * This function is a variant of [method@Gio.Socket.receive] which returns a
+     * [struct@GLib.Bytes] rather than a plain buffer.
+     *
+     * Pass `-1` to `timeout_us` to block indefinitely until data is received (or
+     * the connection is closed, or there is an error). Pass `0` to use the default
+     * timeout from [property@Gio.Socket:timeout], or pass a positive number to wait
+     * for that many microseconds for data before returning `G_IO_ERROR_TIMED_OUT`.
+     * @param size - the number of bytes you want to read from the socket
+     * @param timeoutUs - the timeout to wait for, in microseconds, or `-1` to block
+     * @param cancellable - a %GCancellable, or `NULL`
+     */
     receiveBytes(size, timeoutUs, cancellable) {
         const error = { value: null };
         const ptr = call("libgio-2.0.so.0", "g_socket_receive_bytes", [
@@ -758,6 +1243,26 @@ export class Socket extends GObject.GObject {
         }
         return getObject(ptr, GLib.Bytes);
     }
+    /**
+     * Receive data (up to `size` bytes) from a socket.
+     *
+     * This function is a variant of [method@Gio.Socket.receive_from] which returns
+     * a [struct@GLib.Bytes] rather than a plain buffer.
+     *
+     * If `address` is non-%NULL then `address` will be set equal to the
+     * source address of the received packet.
+     *
+     * The `address` is owned by the caller.
+     *
+     * Pass `-1` to `timeout_us` to block indefinitely until data is received (or
+     * the connection is closed, or there is an error). Pass `0` to use the default
+     * timeout from [property@Gio.Socket:timeout], or pass a positive number to wait
+     * for that many microseconds for data before returning `G_IO_ERROR_TIMED_OUT`.
+     * @param address - return location for a #GSocketAddress
+     * @param size - the number of bytes you want to read from the socket
+     * @param timeoutUs - the timeout to wait for, in microseconds, or `-1` to block
+     * @param cancellable - a #GCancellable, or `NULL`
+     */
     receiveBytesFrom(size, timeoutUs, address, cancellable) {
         const error = { value: null };
         const ptr = call("libgio-2.0.so.0", "g_socket_receive_bytes_from", [
@@ -805,6 +1310,19 @@ export class Socket extends GObject.GObject {
         }
         return getObject(ptr, GLib.Bytes);
     }
+    /**
+     * Receive data (up to `size` bytes) from a socket.
+     *
+     * If `address` is non-%NULL then `address` will be set equal to the
+     * source address of the received packet.
+     * `address` is owned by the caller.
+     *
+     * See g_socket_receive() for additional information.
+     * @param address - a pointer to a #GSocketAddress
+     * @param buffer - a buffer to read data into (which should be at least `size` bytes long).
+     * @param size - the number of bytes you want to read from the socket
+     * @param cancellable - a %GCancellable or %NULL
+     */
     receiveFrom(buffer, size, address, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_receive_from", [
@@ -853,6 +1371,73 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Receive data from a socket.  For receiving multiple messages, see
+     * g_socket_receive_messages(); for easier use, see
+     * g_socket_receive() and g_socket_receive_from().
+     *
+     * If `address` is non-%NULL then `address` will be set equal to the
+     * source address of the received packet.
+     * `address` is owned by the caller.
+     *
+     * `vector` must point to an array of #GInputVector structs and
+     * `num_vectors` must be the length of this array.  These structs
+     * describe the buffers that received data will be scattered into.
+     * If `num_vectors` is -1, then `vectors` is assumed to be terminated
+     * by a #GInputVector with a %NULL buffer pointer.
+     *
+     * As a special case, if `num_vectors` is 0 (in which case, `vectors` may of course be %NULL), then a single byte is received and
+     * discarded. This is to facilitate the common practice of sending a
+     * single '\0' byte for the purposes of transferring ancillary data.
+     *
+     * @messages, if non-%NULL, will be set to point to a newly-allocated
+     * array of #GSocketControlMessage instances or %NULL if no such
+     * messages was received. These correspond to the control messages
+     * received from the kernel, one #GSocketControlMessage per message
+     * from the kernel. This array is %NULL-terminated and must be freed
+     * by the caller using g_free() after calling g_object_unref() on each
+     * element. If `messages` is %NULL, any control messages received will
+     * be discarded.
+     *
+     * @num_messages, if non-%NULL, will be set to the number of control
+     * messages received.
+     *
+     * If both `messages` and `num_messages` are non-%NULL, then
+     * `num_messages` gives the number of #GSocketControlMessage instances
+     * in `messages` (ie: not including the %NULL terminator).
+     *
+     * `flags` is an in/out parameter. The commonly available arguments
+     * for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too
+     * (and g_socket_receive_message() may pass system-specific flags out).
+     * Flags passed in to the parameter affect the receive operation; flags returned
+     * out of it are relevant to the specific returned message.
+     *
+     * As with g_socket_receive(), data may be discarded if `socket` is
+     * %G_SOCKET_TYPE_DATAGRAM or %G_SOCKET_TYPE_SEQPACKET and you do not
+     * provide enough buffer space to read a complete message. You can pass
+     * %G_SOCKET_MSG_PEEK in `flags` to peek at the current message without
+     * removing it from the receive queue, but there is no portable way to find
+     * out the length of the message other than by reading it into a
+     * sufficiently-large buffer.
+     *
+     * If the socket is in blocking mode the call will block until there
+     * is some data to receive, the connection is closed, or there is an
+     * error. If there is no data available and the socket is in
+     * non-blocking mode, a %G_IO_ERROR_WOULD_BLOCK error will be
+     * returned. To be notified when data is available, wait for the
+     * %G_IO_IN condition.
+     *
+     * On error -1 is returned and `error` is set accordingly.
+     * @param address - a pointer to a #GSocketAddress
+     * @param vectors - an array of #GInputVector structs
+     * @param numVectors - the number of elements in @vectors, or -1
+     * @param messages - a pointer
+     * @param numMessages - a pointer which will be filled with the number of
+     * @param flags - a pointer to an int containing #GSocketMsgFlags flags,
+     * @param cancellable - a %GCancellable or %NULL
+     */
     receiveMessage(vectors, numVectors, numMessages, flags, address, messages, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_receive_message", [
@@ -920,6 +1505,59 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Receive multiple data messages from `socket` in one go.  This is the most
+     * complicated and fully-featured version of this call. For easier use, see
+     * g_socket_receive(), g_socket_receive_from(), and g_socket_receive_message().
+     *
+     * `messages` must point to an array of #GInputMessage structs and
+     * `num_messages` must be the length of this array. Each #GInputMessage
+     * contains a pointer to an array of #GInputVector structs describing the
+     * buffers that the data received in each message will be written to. Using
+     * multiple #GInputVectors is more memory-efficient than manually copying data
+     * out of a single buffer to multiple sources, and more system-call-efficient
+     * than making multiple calls to g_socket_receive(), such as in scenarios where
+     * a lot of data packets need to be received (e.g. high-bandwidth video
+     * streaming over RTP/UDP).
+     *
+     * `flags` modify how all messages are received. The commonly available
+     * arguments for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too. These
+     * flags affect the overall receive operation. Flags affecting individual
+     * messages are returned in #GInputMessage.flags.
+     *
+     * The other members of #GInputMessage are treated as described in its
+     * documentation.
+     *
+     * If #GSocket:blocking is %TRUE the call will block until `num_messages` have
+     * been received, or the end of the stream is reached.
+     *
+     * If #GSocket:blocking is %FALSE the call will return up to `num_messages` without blocking, or %G_IO_ERROR_WOULD_BLOCK if no messages are queued in the
+     * operating system to be received.
+     *
+     * In blocking mode, if #GSocket:timeout is positive and is reached before any
+     * messages are received, %G_IO_ERROR_TIMED_OUT is returned, otherwise up to
+     * `num_messages` are returned. (Note: This is effectively the
+     * behaviour of `MSG_WAITFORONE` with recvmmsg().)
+     *
+     * To be notified when messages are available, wait for the
+     * %G_IO_IN condition. Note though that you may still receive
+     * %G_IO_ERROR_WOULD_BLOCK from g_socket_receive_messages() even if you were
+     * previously notified of a %G_IO_IN condition.
+     *
+     * If the remote peer closes the connection, any messages queued in the
+     * operating system will be returned, and subsequent calls to
+     * g_socket_receive_messages() will return 0 (with no error set).
+     *
+     * On error -1 is returned and `error` is set accordingly. An error will only
+     * be returned if zero messages could be received; otherwise the number of
+     * messages successfully received before the error will be returned.
+     * @param messages - an array of #GInputMessage structs
+     * @param numMessages - the number of elements in @messages
+     * @param flags - an int containing #GSocketMsgFlags flags for the overall operation,
+     * @param cancellable - a %GCancellable or %NULL
+     */
     receiveMessages(messages, numMessages, flags, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_receive_messages", [
@@ -964,6 +1602,15 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * This behaves exactly the same as g_socket_receive(), except that
+     * the choice of blocking or non-blocking behavior is determined by
+     * the `blocking` argument rather than by @socket's properties.
+     * @param buffer - a buffer to read data into (which should be at least `size` bytes long).
+     * @param size - the number of bytes you want to read from the socket
+     * @param blocking - whether to do blocking or non-blocking I/O
+     * @param cancellable - a %GCancellable or %NULL
+     */
     receiveWithBlocking(buffer, size, blocking, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_receive_with_blocking", [
@@ -1011,6 +1658,25 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Tries to send `size` bytes from `buffer` on the socket. This is
+     * mainly used by connection-oriented sockets; it is identical to
+     * g_socket_send_to() with `address` set to %NULL.
+     *
+     * If the socket is in blocking mode the call will block until there is
+     * space for the data in the socket queue. If there is no space available
+     * and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
+     * will be returned. To be notified when space is available, wait for the
+     * %G_IO_OUT condition. Note though that you may still receive
+     * %G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
+     * notified of a %G_IO_OUT condition. (On Windows in particular, this is
+     * very common due to the way the underlying APIs work.)
+     *
+     * On error -1 is returned and `error` is set accordingly.
+     * @param buffer - the buffer
+     * @param size - the number of bytes to send
+     * @param cancellable - a %GCancellable or %NULL
+     */
     send(buffer, size, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_send", [
@@ -1051,6 +1717,56 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Send data to `address` on @socket.  For sending multiple messages see
+     * g_socket_send_messages(); for easier use, see
+     * g_socket_send() and g_socket_send_to().
+     *
+     * If `address` is %NULL then the message is sent to the default receiver
+     * (set by g_socket_connect()).
+     *
+     * `vectors` must point to an array of #GOutputVector structs and
+     * `num_vectors` must be the length of this array. (If `num_vectors` is -1,
+     * then `vectors` is assumed to be terminated by a #GOutputVector with a
+     * %NULL buffer pointer.) The #GOutputVector structs describe the buffers
+     * that the sent data will be gathered from. Using multiple
+     * #GOutputVectors is more memory-efficient than manually copying
+     * data from multiple sources into a single buffer, and more
+     * network-efficient than making multiple calls to g_socket_send().
+     *
+     * @messages, if non-%NULL, is taken to point to an array of `num_messages` #GSocketControlMessage instances. These correspond to the control
+     * messages to be sent on the socket.
+     * If `num_messages` is -1 then `messages` is treated as a %NULL-terminated
+     * array.
+     *
+     * `flags` modify how the message is sent. The commonly available arguments
+     * for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too.
+     *
+     * If the socket is in blocking mode the call will block until there is
+     * space for the data in the socket queue. If there is no space available
+     * and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
+     * will be returned. To be notified when space is available, wait for the
+     * %G_IO_OUT condition. Note though that you may still receive
+     * %G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
+     * notified of a %G_IO_OUT condition. (On Windows in particular, this is
+     * very common due to the way the underlying APIs work.)
+     *
+     * The sum of the sizes of each #GOutputVector in vectors must not be
+     * greater than %G_MAXSSIZE. If the message can be larger than this,
+     * then it is mandatory to use the g_socket_send_message_with_timeout()
+     * function.
+     *
+     * On error -1 is returned and `error` is set accordingly.
+     * @param address - a #GSocketAddress, or %NULL
+     * @param vectors - an array of #GOutputVector structs
+     * @param numVectors - the number of elements in @vectors, or -1
+     * @param messages - a pointer to an
+     * @param numMessages - number of elements in @messages, or -1.
+     * @param flags - an int containing #GSocketMsgFlags flags, which may additionally
+     * @param cancellable - a %GCancellable or %NULL
+     */
     sendMessage(vectors, numVectors, numMessages, flags, address, messages, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_send_message", [
@@ -1109,6 +1825,24 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * This behaves exactly the same as g_socket_send_message(), except that
+     * the choice of timeout behavior is determined by the `timeout_us` argument
+     * rather than by @socket's properties.
+     *
+     * On error %G_POLLABLE_RETURN_FAILED is returned and `error` is set accordingly, or
+     * if the socket is currently not writable %G_POLLABLE_RETURN_WOULD_BLOCK is
+     * returned. `bytes_written` will contain 0 in both cases.
+     * @param address - a #GSocketAddress, or %NULL
+     * @param vectors - an array of #GOutputVector structs
+     * @param numVectors - the number of elements in @vectors, or -1
+     * @param messages - a pointer to an
+     * @param numMessages - number of elements in @messages, or -1.
+     * @param flags - an int containing #GSocketMsgFlags flags, which may additionally
+     * @param timeoutUs - the maximum time (in microseconds) to wait, or -1
+     * @param bytesWritten - location to store the number of bytes that were written to the socket
+     * @param cancellable - a %GCancellable or %NULL
+     */
     sendMessageWithTimeout(vectors, numVectors, numMessages, flags, timeoutUs, address, messages, bytesWritten, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_send_message_with_timeout", [
@@ -1179,6 +1913,46 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Send multiple data messages from `socket` in one go.  This is the most
+     * complicated and fully-featured version of this call. For easier use, see
+     * g_socket_send(), g_socket_send_to(), and g_socket_send_message().
+     *
+     * `messages` must point to an array of #GOutputMessage structs and
+     * `num_messages` must be the length of this array. Each #GOutputMessage
+     * contains an address to send the data to, and a pointer to an array of
+     * #GOutputVector structs to describe the buffers that the data to be sent
+     * for each message will be gathered from. Using multiple #GOutputVectors is
+     * more memory-efficient than manually copying data from multiple sources
+     * into a single buffer, and more network-efficient than making multiple
+     * calls to g_socket_send(). Sending multiple messages in one go avoids the
+     * overhead of making a lot of syscalls in scenarios where a lot of data
+     * packets need to be sent (e.g. high-bandwidth video streaming over RTP/UDP),
+     * or where the same data needs to be sent to multiple recipients.
+     *
+     * `flags` modify how the message is sent. The commonly available arguments
+     * for this are available in the #GSocketMsgFlags enum, but the
+     * values there are the same as the system values, and the flags
+     * are passed in as-is, so you can pass in system-specific flags too.
+     *
+     * If the socket is in blocking mode the call will block until there is
+     * space for all the data in the socket queue. If there is no space available
+     * and the socket is in non-blocking mode a %G_IO_ERROR_WOULD_BLOCK error
+     * will be returned if no data was written at all, otherwise the number of
+     * messages sent will be returned. To be notified when space is available,
+     * wait for the %G_IO_OUT condition. Note though that you may still receive
+     * %G_IO_ERROR_WOULD_BLOCK from g_socket_send() even if you were previously
+     * notified of a %G_IO_OUT condition. (On Windows in particular, this is
+     * very common due to the way the underlying APIs work.)
+     *
+     * On error -1 is returned and `error` is set accordingly. An error will only
+     * be returned if zero messages could be sent; otherwise the number of messages
+     * successfully sent before the error will be returned.
+     * @param messages - an array of #GOutputMessage structs
+     * @param numMessages - the number of elements in @messages
+     * @param flags - an int containing #GSocketMsgFlags flags, which may additionally
+     * @param cancellable - a %GCancellable or %NULL
+     */
     sendMessages(messages, numMessages, flags, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_send_messages", [
@@ -1223,6 +1997,17 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Tries to send `size` bytes from `buffer` to @address. If `address` is
+     * %NULL then the message is sent to the default receiver (set by
+     * g_socket_connect()).
+     *
+     * See g_socket_send() for additional information.
+     * @param address - a #GSocketAddress, or %NULL
+     * @param buffer - the buffer
+     * @param size - the number of bytes to send
+     * @param cancellable - a %GCancellable or %NULL
+     */
     sendTo(buffer, size, address, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_send_to", [
@@ -1268,6 +2053,15 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * This behaves exactly the same as g_socket_send(), except that
+     * the choice of blocking or non-blocking behavior is determined by
+     * the `blocking` argument rather than by @socket's properties.
+     * @param buffer - the buffer
+     * @param size - the number of bytes to send
+     * @param blocking - whether to do blocking or non-blocking I/O
+     * @param cancellable - a %GCancellable or %NULL
+     */
     sendWithBlocking(buffer, size, blocking, cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_send_with_blocking", [
@@ -1312,6 +2106,18 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Sets the blocking mode of the socket. In blocking mode
+     * all operations (which don’t take an explicit blocking parameter) block until
+     * they succeed or there is an error. In
+     * non-blocking mode all functions return results immediately or
+     * with a %G_IO_ERROR_WOULD_BLOCK error.
+     *
+     * All sockets are created in blocking mode. However, note that the
+     * platform level socket is always non-blocking, and blocking mode
+     * is a GSocket level feature.
+     * @param blocking - Whether to use blocking I/O or not.
+     */
     setBlocking(blocking) {
         call("libgio-2.0.so.0", "g_socket_set_blocking", [
             {
@@ -1324,6 +2130,11 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets whether `socket` should allow sending to broadcast addresses.
+     * This is %FALSE by default.
+     * @param broadcast - whether `socket` should allow sending to broadcast
+     */
     setBroadcast(broadcast) {
         call("libgio-2.0.so.0", "g_socket_set_broadcast", [
             {
@@ -1336,6 +2147,24 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets or unsets the %SO_KEEPALIVE flag on the underlying socket. When
+     * this flag is set on a socket, the system will attempt to verify that the
+     * remote socket endpoint is still present if a sufficiently long period of
+     * time passes with no data being exchanged. If the system is unable to
+     * verify the presence of the remote endpoint, it will automatically close
+     * the connection.
+     *
+     * This option is only functional on certain kinds of sockets. (Notably,
+     * %G_SOCKET_PROTOCOL_TCP sockets.)
+     *
+     * The exact time between pings is system- and protocol-dependent, but will
+     * normally be at least two hours. Most commonly, you would set this flag
+     * on a server socket if you want to allow clients to remain idle for long
+     * periods of time, but also want to ensure that connections are eventually
+     * garbage-collected if clients crash or become unreachable.
+     * @param keepalive - Value for the keepalive flag
+     */
     setKeepalive(keepalive) {
         call("libgio-2.0.so.0", "g_socket_set_keepalive", [
             {
@@ -1348,6 +2177,16 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets the maximum number of outstanding connections allowed
+     * when listening on this socket. If more clients than this are
+     * connecting to the socket and the application is not handling them
+     * on time then the new connections will be refused.
+     *
+     * Note that this must be called before g_socket_listen() and has no
+     * effect if called after that.
+     * @param backlog - the maximum number of pending connections.
+     */
     setListenBacklog(backlog) {
         call("libgio-2.0.so.0", "g_socket_set_listen_backlog", [
             {
@@ -1360,6 +2199,12 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets whether outgoing multicast packets will be received by sockets
+     * listening on that multicast address on the same host. This is %TRUE
+     * by default.
+     * @param loopback - whether `socket` should receive messages sent to its
+     */
     setMulticastLoopback(loopback) {
         call("libgio-2.0.so.0", "g_socket_set_multicast_loopback", [
             {
@@ -1372,6 +2217,12 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets the time-to-live for outgoing multicast datagrams on @socket.
+     * By default, this is 1, meaning that multicast packets will not leave
+     * the local network.
+     * @param ttl - the time-to-live value for all multicast datagrams on @socket
+     */
     setMulticastTtl(ttl) {
         call("libgio-2.0.so.0", "g_socket_set_multicast_ttl", [
             {
@@ -1384,6 +2235,20 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets the value of an integer-valued option on @socket, as with
+     * setsockopt(). (If you need to set a non-integer-valued option,
+     * you will need to call setsockopt() directly.)
+     *
+     * The `<gio/gnetworking.h>`
+     * header pulls in system headers that will define most of the
+     * standard/portable socket options. For unusual socket protocols or
+     * platform-dependent options, you may need to include additional
+     * headers.
+     * @param level - the "API level" of the option (eg, `SOL_SOCKET`)
+     * @param optname - the "name" of the option (eg, `SO_BROADCAST`)
+     * @param value - the value to set the option to
+     */
     setOption(level, optname, value) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_set_option", [
@@ -1420,6 +2285,29 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Sets the time in seconds after which I/O operations on `socket` will
+     * time out if they have not yet completed.
+     *
+     * On a blocking socket, this means that any blocking #GSocket
+     * operation will time out after `timeout` seconds of inactivity,
+     * returning %G_IO_ERROR_TIMED_OUT.
+     *
+     * On a non-blocking socket, calls to g_socket_condition_wait() will
+     * also fail with %G_IO_ERROR_TIMED_OUT after the given time. Sources
+     * created with g_socket_create_source() will trigger after
+     * `timeout` seconds of inactivity, with the requested condition
+     * set, at which point calling g_socket_receive(), g_socket_send(),
+     * g_socket_check_connect_result(), etc, will fail with
+     * %G_IO_ERROR_TIMED_OUT.
+     *
+     * If `timeout` is 0 (the default), operations will never time out
+     * on their own.
+     *
+     * Note that if an I/O operation is interrupted by a signal, this may
+     * cause the timeout to be reset.
+     * @param timeout - the timeout for @socket, in seconds, or 0 for none
+     */
     setTimeout(timeout) {
         call("libgio-2.0.so.0", "g_socket_set_timeout", [
             {
@@ -1432,6 +2320,11 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Sets the time-to-live for outgoing unicast packets on @socket.
+     * By default the platform-specific default value is used.
+     * @param ttl - the time-to-live value for all unicast packets on @socket
+     */
     setTtl(ttl) {
         call("libgio-2.0.so.0", "g_socket_set_ttl", [
             {
@@ -1444,6 +2337,24 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "undefined" });
     }
+    /**
+     * Shut down part or all of a full-duplex connection.
+     *
+     * If `shutdown_read` is %TRUE then the receiving side of the connection
+     * is shut down, and further reading is disallowed.
+     *
+     * If `shutdown_write` is %TRUE then the sending side of the connection
+     * is shut down, and further writing is disallowed.
+     *
+     * It is allowed for both `shutdown_read` and `shutdown_write` to be %TRUE.
+     *
+     * One example where it is useful to shut down only one side of a connection is
+     * graceful disconnect for TCP connections where you close the sending side,
+     * then wait for the other side to close the connection, thus ensuring that the
+     * other side saw all sent data.
+     * @param shutdownRead - whether to shut down the read side
+     * @param shutdownWrite - whether to shut down the write side
+     */
     shutdown(shutdownRead, shutdownWrite) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_socket_shutdown", [
@@ -1476,6 +2387,17 @@ export class Socket extends GObject.GObject {
         }
         return result;
     }
+    /**
+     * Checks if a socket is capable of speaking IPv4.
+     *
+     * IPv4 sockets are capable of speaking IPv4.  On some operating systems
+     * and under some combinations of circumstances IPv6 sockets are also
+     * capable of speaking IPv4.  See RFC 3493 section 3.7 for more
+     * information.
+     *
+     * No other types of sockets are currently considered as being capable
+     * of speaking IPv4.
+     */
     speaksIpv4() {
         return call("libgio-2.0.so.0", "g_socket_speaks_ipv4", [
             {
@@ -1484,6 +2406,24 @@ export class Socket extends GObject.GObject {
             },
         ], { type: "boolean" });
     }
+    /**
+     * Creates a #GSource that can be attached to a #GMainContext to monitor for
+     * the availability of the specified `condition` on the #GDatagramBased. The
+     * #GSource keeps a reference to the @datagram_based.
+     *
+     * The callback on the source is of the #GDatagramBasedSourceFunc type.
+     *
+     * It is meaningless to specify %G_IO_ERR or %G_IO_HUP in @condition; these
+     * conditions will always be reported in the callback if they are true.
+     *
+     * If non-%NULL, `cancellable` can be used to cancel the source, which will
+     * cause the source to trigger, reporting the current condition (which is
+     * likely 0 unless cancellation happened at the same time as a condition
+     * change). You can check for this in the callback using
+     * g_cancellable_is_cancelled().
+     * @param condition - a #GIOCondition mask to monitor
+     * @param cancellable - a #GCancellable
+     */
     createSource(condition, cancellable) {
         const ptr = call("libgio-2.0.so.0", "g_datagram_based_create_source", [
             {
@@ -1507,6 +2447,47 @@ export class Socket extends GObject.GObject {
         });
         return getObject(ptr, GLib.Source);
     }
+    /**
+     * Initializes the object implementing the interface.
+     *
+     * This method is intended for language bindings. If writing in C,
+     * g_initable_new() should typically be used instead.
+     *
+     * The object must be initialized before any real use after initial
+     * construction, either with this function or g_async_initable_init_async().
+     *
+     * Implementations may also support cancellation. If `cancellable` is not %NULL,
+     * then initialization can be cancelled by triggering the cancellable object
+     * from another thread. If the operation was cancelled, the error
+     * %G_IO_ERROR_CANCELLED will be returned. If `cancellable` is not %NULL and
+     * the object doesn't support cancellable initialization the error
+     * %G_IO_ERROR_NOT_SUPPORTED will be returned.
+     *
+     * If the object is not initialized, or initialization returns with an
+     * error, then all operations on the object except g_object_ref() and
+     * g_object_unref() are considered to be invalid, and have undefined
+     * behaviour. See the [description][iface@Gio.Initable#description] for more details.
+     *
+     * Callers should not assume that a class which implements #GInitable can be
+     * initialized multiple times, unless the class explicitly documents itself as
+     * supporting this. Generally, a class’ implementation of init() can assume
+     * (and assert) that it will only be called once. Previously, this documentation
+     * recommended all #GInitable implementations should be idempotent; that
+     * recommendation was relaxed in GLib 2.54.
+     *
+     * If a class explicitly supports being initialized multiple times, it is
+     * recommended that the method is idempotent: multiple calls with the same
+     * arguments should return the same results. Only the first call initializes
+     * the object; further calls return the result of the first call.
+     *
+     * One reason why a class might need to support idempotent initialization is if
+     * it is designed to be used via the singleton pattern, with a
+     * #GObjectClass.constructor that sometimes returns an existing instance.
+     * In this pattern, a caller would expect to be able to call g_initable_init()
+     * on the result of g_object_new(), regardless of whether it is in fact a new
+     * instance.
+     * @param cancellable - optional #GCancellable object, %NULL to ignore.
+     */
     init(cancellable) {
         const error = { value: null };
         const result = call("libgio-2.0.so.0", "g_initable_init", [