@gtkx/ffi 0.1.44 → 0.1.46

package/dist/generated/gio/enums.d.ts

@@ -1,598 +1,1892 @@
+/** An enumeration for well-known message buses. */
 export declare enum BusType {
+    /** An alias for the message bus that activated the process, if any. */
     STARTER = -1,
+    /** Not a message bus. */
     NONE = 0,
+    /** The system-wide message bus. */
     SYSTEM = 1,
+    /** The login session message bus. */
     SESSION = 2
 }
+/** Results returned from g_converter_convert(). */
 export declare enum ConverterResult {
+    /** There was an error during conversion. */
     ERROR = 0,
+    /** Some data was consumed or produced */
     CONVERTED = 1,
+    /** The conversion is finished */
     FINISHED = 2,
+    /** Flushing is finished */
     FLUSHED = 3
 }
+/** Enumeration describing different kinds of native credential types. */
 export declare enum CredentialsType {
+    /** Indicates an invalid native credential type. */
     INVALID = 0,
+    /** The native credentials type is a `struct ucred`. */
     LINUX_UCRED = 1,
+    /** The native credentials type is a `struct cmsgcred`. */
     FREEBSD_CMSGCRED = 2,
+    /** The native credentials type is a `struct sockpeercred`. Added in 2.30. */
     OPENBSD_SOCKPEERCRED = 3,
+    /** The native credentials type is a `ucred_t`. Added in 2.40. */
     SOLARIS_UCRED = 4,
+    /** The native credentials type is a `struct unpcbid`. Added in 2.42. */
     NETBSD_UNPCBID = 5,
+    /** The native credentials type is a `struct xucred`. Added in 2.66. */
     APPLE_XUCRED = 6,
+    /** The native credentials type is a PID `DWORD`. Added in 2.72. */
     WIN32_PID = 7
 }
+/** Error codes for the %G_DBUS_ERROR error domain. */
 export declare enum DBusError {
+    /**
+     * A generic error; "something went wrong" - see the error message for
+     * more.
+     */
     FAILED = 0,
+    /** There was not enough memory to complete an operation. */
     NO_MEMORY = 1,
+    /**
+     * The bus doesn't know how to launch a service to supply the bus name
+     * you wanted.
+     */
     SERVICE_UNKNOWN = 2,
+    /**
+     * The bus name you referenced doesn't exist (i.e. no application owns
+     * it).
+     */
     NAME_HAS_NO_OWNER = 3,
+    /** No reply to a message expecting one, usually means a timeout occurred. */
     NO_REPLY = 4,
+    /** Something went wrong reading or writing to a socket, for example. */
     IO_ERROR = 5,
+    /** A D-Bus bus address was malformed. */
     BAD_ADDRESS = 6,
+    /** Requested operation isn't supported (like ENOSYS on UNIX). */
     NOT_SUPPORTED = 7,
+    /** Some limited resource is exhausted. */
     LIMITS_EXCEEDED = 8,
+    /** Security restrictions don't allow doing what you're trying to do. */
     ACCESS_DENIED = 9,
+    /** Authentication didn't work. */
     AUTH_FAILED = 10,
+    /**
+     * Unable to connect to server (probably caused by ECONNREFUSED on a
+     * socket).
+     */
     NO_SERVER = 11,
+    /**
+     * Certain timeout errors, possibly ETIMEDOUT on a socket.  Note that
+     * %G_DBUS_ERROR_NO_REPLY is used for message reply timeouts. Warning:
+     * this is confusingly-named given that %G_DBUS_ERROR_TIMED_OUT also
+     * exists. We can't fix it for compatibility reasons so just be
+     * careful.
+     */
     TIMEOUT = 12,
+    /** No network access (probably ENETUNREACH on a socket). */
     NO_NETWORK = 13,
+    /** Can't bind a socket since its address is in use (i.e. EADDRINUSE). */
     ADDRESS_IN_USE = 14,
+    /** The connection is disconnected and you're trying to use it. */
     DISCONNECTED = 15,
+    /** Invalid arguments passed to a method call. */
     INVALID_ARGS = 16,
+    /** Missing file. */
     FILE_NOT_FOUND = 17,
+    /** Existing file and the operation you're using does not silently overwrite. */
     FILE_EXISTS = 18,
+    /** Method name you invoked isn't known by the object you invoked it on. */
     UNKNOWN_METHOD = 19,
+    /**
+     * Certain timeout errors, e.g. while starting a service. Warning: this is
+     * confusingly-named given that %G_DBUS_ERROR_TIMEOUT also exists. We
+     * can't fix it for compatibility reasons so just be careful.
+     */
     TIMED_OUT = 20,
+    /** Tried to remove or modify a match rule that didn't exist. */
     MATCH_RULE_NOT_FOUND = 21,
+    /** The match rule isn't syntactically valid. */
     MATCH_RULE_INVALID = 22,
+    /** While starting a new process, the exec() call failed. */
     SPAWN_EXEC_FAILED = 23,
+    /** While starting a new process, the fork() call failed. */
     SPAWN_FORK_FAILED = 24,
+    /** While starting a new process, the child exited with a status code. */
     SPAWN_CHILD_EXITED = 25,
+    /** While starting a new process, the child exited on a signal. */
     SPAWN_CHILD_SIGNALED = 26,
+    /** While starting a new process, something went wrong. */
     SPAWN_FAILED = 27,
+    /** We failed to setup the environment correctly. */
     SPAWN_SETUP_FAILED = 28,
+    /** We failed to setup the config parser correctly. */
     SPAWN_CONFIG_INVALID = 29,
+    /** Bus name was not valid. */
     SPAWN_SERVICE_INVALID = 30,
+    /** Service file not found in system-services directory. */
     SPAWN_SERVICE_NOT_FOUND = 31,
+    /** Permissions are incorrect on the setuid helper. */
     SPAWN_PERMISSIONS_INVALID = 32,
+    /** Service file invalid (Name, User or Exec missing). */
     SPAWN_FILE_INVALID = 33,
+    /** Tried to get a UNIX process ID and it wasn't available. */
     SPAWN_NO_MEMORY = 34,
+    /** Tried to get a UNIX process ID and it wasn't available. */
     UNIX_PROCESS_ID_UNKNOWN = 35,
+    /** A type signature is not valid. */
     INVALID_SIGNATURE = 36,
+    /** A file contains invalid syntax or is otherwise broken. */
     INVALID_FILE_CONTENT = 37,
+    /** Asked for SELinux security context and it wasn't available. */
     SELINUX_SECURITY_CONTEXT_UNKNOWN = 38,
+    /** Asked for ADT audit data and it wasn't available. */
     ADT_AUDIT_DATA_UNKNOWN = 39,
+    /** There's already an object with the requested object path. */
     OBJECT_PATH_IN_USE = 40,
+    /** Object you invoked a method on isn't known. Since 2.42 */
     UNKNOWN_OBJECT = 41,
+    /** Interface you invoked a method on isn't known by the object. Since 2.42 */
     UNKNOWN_INTERFACE = 42,
+    /** Property you tried to access isn't known by the object. Since 2.42 */
     UNKNOWN_PROPERTY = 43,
+    /** Property you tried to set is read-only. Since 2.42 */
     PROPERTY_READ_ONLY = 44
 }
+/** Enumeration used to describe the byte order of a D-Bus message. */
 export declare enum DBusMessageByteOrder {
+    /** The byte order is big endian. */
     BIG_ENDIAN = 66,
+    /** The byte order is little endian. */
     LITTLE_ENDIAN = 108
 }
+/** Header fields used in #GDBusMessage. */
 export declare enum DBusMessageHeaderField {
+    /** Not a valid header field. */
     INVALID = 0,
+    /** The object path. */
     PATH = 1,
+    /** The interface name. */
     INTERFACE = 2,
+    /** The method or signal name. */
     MEMBER = 3,
+    /** The name of the error that occurred. */
     ERROR_NAME = 4,
+    /** The serial number the message is a reply to. */
     REPLY_SERIAL = 5,
+    /** The name the message is intended for. */
     DESTINATION = 6,
+    /** Unique name of the sender of the message (filled in by the bus). */
     SENDER = 7,
+    /** The signature of the message body. */
     SIGNATURE = 8,
+    /** The number of UNIX file descriptors that accompany the message. */
     NUM_UNIX_FDS = 9
 }
+/** Message types used in #GDBusMessage. */
 export declare enum DBusMessageType {
+    /** Message is of invalid type. */
     INVALID = 0,
+    /** Method call. */
     METHOD_CALL = 1,
+    /** Method reply. */
     METHOD_RETURN = 2,
+    /** Error reply. */
     ERROR = 3,
+    /** Signal emission. */
     SIGNAL = 4
 }
+/**
+ * #GDataStreamByteOrder is used to ensure proper endianness of streaming data sources
+ * across various machine architectures.
+ */
 export declare enum DataStreamByteOrder {
+    /** Selects Big Endian byte order. */
     BIG_ENDIAN = 0,
+    /** Selects Little Endian byte order. */
     LITTLE_ENDIAN = 1,
+    /** Selects endianness based on host machine's architecture. */
     HOST_ENDIAN = 2
 }
+/**
+ * #GDataStreamNewlineType is used when checking for or setting the line endings for a given file.
+ */
 export declare enum DataStreamNewlineType {
+    /** Selects "LF" line endings, common on most modern UNIX platforms. */
     LF = 0,
+    /** Selects "CR" line endings. */
     CR = 1,
+    /** Selects "CR, LF" line ending, common on Microsoft Windows. */
     CR_LF = 2,
+    /** Automatically try to handle any line ending type. */
     ANY = 3
 }
+/** Enumeration describing how a drive can be started/stopped. */
 export declare enum DriveStartStopType {
+    /**
+     * Unknown or drive doesn't support
+     * start/stop.
+     */
     UNKNOWN = 0,
+    /**
+     * The stop method will physically
+     * shut down the drive and e.g. power down the port the drive is
+     * attached to.
+     */
     SHUTDOWN = 1,
+    /**
+     * The start/stop methods are used
+     * for connecting/disconnect to the drive over the network.
+     */
     NETWORK = 2,
+    /**
+     * The start/stop methods will
+     * assemble/disassemble a virtual drive from several physical
+     * drives.
+     */
     MULTIDISK = 3,
+    /**
+     * The start/stop methods will
+     * unlock/lock the disk (for example using the ATA `SECURITY UNLOCK
+     * DEVICE` command)
+     */
     PASSWORD = 4
 }
+/**
+ * GEmblemOrigin is used to add information about the origin of the emblem
+ * to #GEmblem.
+ */
 export declare enum EmblemOrigin {
+    /** Emblem of unknown origin */
     UNKNOWN = 0,
+    /** Emblem adds device-specific information */
     DEVICE = 1,
+    /** Emblem depicts live metadata, such as "readonly" */
     LIVEMETADATA = 2,
+    /** Emblem comes from a user-defined tag, e.g. set by nautilus (in the future) */
     TAG = 3
 }
+/** Used by g_file_set_attributes_from_info() when setting file attributes. */
 export declare enum FileAttributeStatus {
+    /** Attribute value is unset (empty). */
     UNSET = 0,
+    /** Attribute value is set. */
     SET = 1,
+    /** Indicates an error in setting the value. */
     ERROR_SETTING = 2
 }
+/** The data types for file attributes. */
 export declare enum FileAttributeType {
+    /** indicates an invalid or uninitialized type. */
     INVALID = 0,
+    /** a null terminated UTF8 string. */
     STRING = 1,
+    /** a zero terminated string of non-zero bytes. */
     BYTE_STRING = 2,
+    /** a boolean value. */
     BOOLEAN = 3,
+    /** an unsigned 4-byte/32-bit integer. */
     UINT32 = 4,
+    /** a signed 4-byte/32-bit integer. */
     INT32 = 5,
+    /** an unsigned 8-byte/64-bit integer. */
     UINT64 = 6,
+    /** a signed 8-byte/64-bit integer. */
     INT64 = 7,
+    /** a #GObject. */
     OBJECT = 8,
+    /** a %NULL terminated char **. Since 2.22 */
     STRINGV = 9
 }
+/** Specifies what type of event a monitor event is. */
 export declare enum FileMonitorEvent {
+    /** a file changed. */
     CHANGED = 0,
+    /** a hint that this was probably the last change in a set of changes. */
     CHANGES_DONE_HINT = 1,
+    /** a file was deleted. */
     DELETED = 2,
+    /** a file was created. */
     CREATED = 3,
+    /** a file attribute was changed. */
     ATTRIBUTE_CHANGED = 4,
+    /** the file location will soon be unmounted. */
     PRE_UNMOUNT = 5,
+    /** the file location was unmounted. */
     UNMOUNTED = 6,
+    /**
+     * the file was moved -- only sent if the
+     * (deprecated) %G_FILE_MONITOR_SEND_MOVED flag is set
+     */
     MOVED = 7,
+    /**
+     * the file was renamed within the
+     * current directory -- only sent if the %G_FILE_MONITOR_WATCH_MOVES
+     * flag is set.  Since: 2.46.
+     */
     RENAMED = 8,
+    /**
+     * the file was moved into the
+     * monitored directory from another location -- only sent if the
+     * %G_FILE_MONITOR_WATCH_MOVES flag is set.  Since: 2.46.
+     */
     MOVED_IN = 9,
+    /**
+     * the file was moved out of the
+     * monitored directory to another location -- only sent if the
+     * %G_FILE_MONITOR_WATCH_MOVES flag is set.  Since: 2.46
+     */
     MOVED_OUT = 10
 }
+/**
+ * Indicates the file's on-disk type.
+ *
+ * On Windows systems a file will never have %G_FILE_TYPE_SYMBOLIC_LINK type;
+ * use #GFileInfo and %G_FILE_ATTRIBUTE_STANDARD_IS_SYMLINK to determine
+ * whether a file is a symlink or not. This is due to the fact that NTFS does
+ * not have a single filesystem object type for symbolic links - it has
+ * files that symlink to files, and directories that symlink to directories.
+ * #GFileType enumeration cannot precisely represent this important distinction,
+ * which is why all Windows symlinks will continue to be reported as
+ * %G_FILE_TYPE_REGULAR or %G_FILE_TYPE_DIRECTORY.
+ */
 export declare enum FileType {
+    /** File's type is unknown. */
     UNKNOWN = 0,
+    /** File handle represents a regular file. */
     REGULAR = 1,
+    /** File handle represents a directory. */
     DIRECTORY = 2,
+    /**
+     * File handle represents a symbolic link
+     * (Unix systems).
+     */
     SYMBOLIC_LINK = 3,
+    /**
+     * File is a "special" file, such as a socket, fifo,
+     * block device, or character device.
+     */
     SPECIAL = 4,
+    /** File is a shortcut (Windows systems). */
     SHORTCUT = 5,
+    /** File is a mountable location. */
     MOUNTABLE = 6
 }
+/**
+ * Indicates a hint from the file system whether files should be
+ * previewed in a file manager. Returned as the value of the key
+ * %G_FILE_ATTRIBUTE_FILESYSTEM_USE_PREVIEW.
+ */
 export declare enum FilesystemPreviewType {
+    /** Only preview files if user has explicitly requested it. */
     IF_ALWAYS = 0,
+    /** Preview files if user has requested preview of "local" files. */
     IF_LOCAL = 1,
+    /** Never preview files. */
     NEVER = 2
 }
+/**
+ * Error codes returned by GIO functions.
+ *
+ * Note that this domain may be extended in future GLib releases. In
+ * general, new error codes either only apply to new APIs, or else
+ * replace %G_IO_ERROR_FAILED in cases that were not explicitly
+ * distinguished before. You should therefore avoid writing code like
+ * |[<!-- language="C" -->
+ * if (g_error_matches (error, G_IO_ERROR, G_IO_ERROR_FAILED))
+ * {
+ * // Assume that this is EPRINTERONFIRE
+ * ...
+ * }
+ * ]|
+ * but should instead treat all unrecognized error codes the same as
+ * %G_IO_ERROR_FAILED.
+ *
+ * See also #GPollableReturn for a cheaper way of returning
+ * %G_IO_ERROR_WOULD_BLOCK to callers without allocating a #GError.
+ */
 export declare enum IOErrorEnum {
+    /**
+     * Generic error condition for when an operation fails
+     * and no more specific #GIOErrorEnum value is defined.
+     */
     FAILED = 0,
+    /** File not found. */
     NOT_FOUND = 1,
+    /** File already exists. */
     EXISTS = 2,
+    /** File is a directory. */
     IS_DIRECTORY = 3,
+    /** File is not a directory. */
     NOT_DIRECTORY = 4,
+    /** File is a directory that isn't empty. */
     NOT_EMPTY = 5,
+    /** File is not a regular file. */
     NOT_REGULAR_FILE = 6,
+    /** File is not a symbolic link. */
     NOT_SYMBOLIC_LINK = 7,
+    /** File cannot be mounted. */
     NOT_MOUNTABLE_FILE = 8,
+    /** Filename is too many characters. */
     FILENAME_TOO_LONG = 9,
+    /** Filename is invalid or contains invalid characters. */
     INVALID_FILENAME = 10,
+    /** File contains too many symbolic links. */
     TOO_MANY_LINKS = 11,
+    /** No space left on drive. */
     NO_SPACE = 12,
+    /** Invalid argument. */
     INVALID_ARGUMENT = 13,
+    /** Permission denied. */
     PERMISSION_DENIED = 14,
+    /** Operation (or one of its parameters) not supported */
     NOT_SUPPORTED = 15,
+    /** File isn't mounted. */
     NOT_MOUNTED = 16,
+    /** File is already mounted. */
     ALREADY_MOUNTED = 17,
+    /** File was closed. */
     CLOSED = 18,
+    /** Operation was cancelled. See #GCancellable. */
     CANCELLED = 19,
+    /** Operations are still pending. */
     PENDING = 20,
+    /** File is read only. */
     READ_ONLY = 21,
+    /** Backup couldn't be created. */
     CANT_CREATE_BACKUP = 22,
+    /** File's Entity Tag was incorrect. */
     WRONG_ETAG = 23,
+    /** Operation timed out. */
     TIMED_OUT = 24,
+    /** Operation would be recursive. */
     WOULD_RECURSE = 25,
+    /** File is busy. */
     BUSY = 26,
+    /** Operation would block. */
     WOULD_BLOCK = 27,
+    /** Host couldn't be found (remote operations). */
     HOST_NOT_FOUND = 28,
+    /** Operation would merge files. */
     WOULD_MERGE = 29,
+    /**
+     * Operation failed and a helper program has
+     * already interacted with the user. Do not display any error dialog.
+     */
     FAILED_HANDLED = 30,
+    /**
+     * The current process has too many files
+     * open and can't open any more. Duplicate descriptors do count toward
+     * this limit. Since 2.20
+     */
     TOO_MANY_OPEN_FILES = 31,
+    /** The object has not been initialized. Since 2.22 */
     NOT_INITIALIZED = 32,
+    /** The requested address is already in use. Since 2.22 */
     ADDRESS_IN_USE = 33,
+    /** Need more input to finish operation. Since 2.24 */
     PARTIAL_INPUT = 34,
+    /** The input data was invalid. Since 2.24 */
     INVALID_DATA = 35,
+    /**
+     * A remote object generated an error that
+     * doesn't correspond to a locally registered #GError error
+     * domain. Use g_dbus_error_get_remote_error() to extract the D-Bus
+     * error name and g_dbus_error_strip_remote_error() to fix up the
+     * message so it matches what was received on the wire. Since 2.26.
+     */
     DBUS_ERROR = 36,
+    /** Host unreachable. Since 2.26 */
     HOST_UNREACHABLE = 37,
+    /** Network unreachable. Since 2.26 */
     NETWORK_UNREACHABLE = 38,
+    /** Connection refused. Since 2.26 */
     CONNECTION_REFUSED = 39,
+    /** Connection to proxy server failed. Since 2.26 */
     PROXY_FAILED = 40,
+    /** Proxy authentication failed. Since 2.26 */
     PROXY_AUTH_FAILED = 41,
+    /** Proxy server needs authentication. Since 2.26 */
     PROXY_NEED_AUTH = 42,
+    /**
+     * Proxy connection is not allowed by ruleset.
+     * Since 2.26
+     */
     PROXY_NOT_ALLOWED = 43,
+    /** Broken pipe. Since 2.36 */
     BROKEN_PIPE = 44,
+    /**
+     * Connection closed by peer. Note that this
+     * is the same code as %G_IO_ERROR_BROKEN_PIPE; before 2.44 some
+     * "connection closed" errors returned %G_IO_ERROR_BROKEN_PIPE, but others
+     * returned %G_IO_ERROR_FAILED. Now they should all return the same
+     * value, which has this more logical name. Since 2.44.
+     */
     CONNECTION_CLOSED = 44,
+    /** Transport endpoint is not connected. Since 2.44 */
     NOT_CONNECTED = 45,
+    /** Message too large. Since 2.48. */
     MESSAGE_TOO_LARGE = 46,
+    /** No such device found. Since 2.74 */
     NO_SUCH_DEVICE = 47,
+    /** Destination address unset. Since 2.80 */
     DESTINATION_UNSET = 48
 }
+/** Flags for use with g_io_module_scope_new(). */
 export declare enum IOModuleScopeFlags {
+    /** No module scan flags */
     NONE = 0,
+    /**
+     * When using this scope to load or
+     * scan modules, automatically block a modules which has the same base
+     * basename as previously loaded module.
+     */
     BLOCK_DUPLICATES = 1
 }
+/**
+ * Memory availability warning levels.
+ *
+ * Note that because new values might be added, it is recommended that applications check
+ * #GMemoryMonitorWarningLevel as ranges, for example:
+ * |[<!-- language="C" -->
+ * if (warning_level > G_MEMORY_MONITOR_WARNING_LEVEL_LOW)
+ * drop_caches ();
+ * ]|
+ */
 export declare enum MemoryMonitorWarningLevel {
+    /**
+     * Memory on the device is low, processes
+     * should free up unneeded resources (for example, in-memory caches) so they can
+     * be used elsewhere.
+     */
     LOW = 50,
+    /**
+     * Same as `G_MEMORY_MONITOR_WARNING_LEVEL_LOW`   but the device has even less free memory, so processes should try harder to free
+     * up unneeded resources. If your process does not need to stay running, it is a
+     * good time for it to quit.
+     */
     MEDIUM = 100,
+    /**
+     * The system will soon start terminating
+     * processes to reclaim memory, including background processes.
+     */
     CRITICAL = 255
 }
+/**
+ * #GMountOperationResult is returned as a result when a request for
+ * information is send by the mounting operation.
+ */
 export declare enum MountOperationResult {
+    /**
+     * The request was fulfilled and the
+     * user specified data is now available
+     */
     HANDLED = 0,
+    /**
+     * The user requested the mount operation
+     * to be aborted
+     */
     ABORTED = 1,
+    /**
+     * The request was unhandled (i.e. not
+     * implemented)
+     */
     UNHANDLED = 2
 }
+/** The host's network connectivity state, as reported by #GNetworkMonitor. */
 export declare enum NetworkConnectivity {
+    /**
+     * The host is not configured with a
+     * route to the Internet; it may or may not be connected to a local
+     * network.
+     */
     LOCAL = 1,
+    /**
+     * The host is connected to a network, but
+     * does not appear to be able to reach the full Internet, perhaps
+     * due to upstream network problems.
+     */
     LIMITED = 2,
+    /**
+     * The host is behind a captive portal and
+     * cannot reach the full Internet.
+     */
     PORTAL = 3,
+    /**
+     * The host is connected to a network, and
+     * appears to be able to reach the full Internet.
+     */
     FULL = 4
 }
+/** Priority levels for #GNotifications. */
 export declare enum NotificationPriority {
+    /**
+     * the default priority, to be used for the
+     * majority of notifications (for example email messages, software updates,
+     * completed download/sync operations)
+     */
     NORMAL = 0,
+    /**
+     * for notifications that do not require
+     * immediate attention - typically used for contextual background
+     * information, such as contact birthdays or local weather
+     */
     LOW = 1,
+    /**
+     * for events that require more attention,
+     * usually because responses are time-sensitive (for example chat and SMS
+     * messages or alarms)
+     */
     HIGH = 2,
+    /**
+     * for urgent notifications, or notifications
+     * that require a response in a short space of time (for example phone calls
+     * or emergency warnings)
+     */
     URGENT = 3
 }
+/**
+ * #GPasswordSave is used to indicate the lifespan of a saved password.
+ *
+ * #Gvfs stores passwords in the Gnome keyring when this flag allows it
+ * to, and later retrieves it again from there.
+ */
 export declare enum PasswordSave {
+    /** never save a password. */
     NEVER = 0,
+    /** save a password for the session. */
     FOR_SESSION = 1,
+    /** save a password permanently. */
     PERMANENTLY = 2
 }
+/**
+ * Return value for various IO operations that signal errors via the
+ * return value and not necessarily via a #GError.
+ *
+ * This enum exists to be able to return errors to callers without having to
+ * allocate a #GError. Allocating #GErrors can be quite expensive for
+ * regularly happening errors like %G_IO_ERROR_WOULD_BLOCK.
+ *
+ * In case of %G_POLLABLE_RETURN_FAILED a #GError should be set for the
+ * operation to give details about the error that happened.
+ */
 export declare enum PollableReturn {
+    /** Generic error condition for when an operation fails. */
     FAILED = 0,
+    /** The operation was successfully finished. */
     OK = 1,
+    /** The operation would block. */
     WOULD_BLOCK = -27
 }
+/**
+ * An error code used with %G_RESOLVER_ERROR in a #GError returned
+ * from a #GResolver routine.
+ */
 export declare enum ResolverError {
+    /**
+     * the requested name/address/service was not
+     * found
+     */
     NOT_FOUND = 0,
+    /**
+     * the requested information could not
+     * be looked up due to a network error or similar problem
+     */
     TEMPORARY_FAILURE = 1,
+    /** unknown error */
     INTERNAL = 2
 }
+/**
+ * The type of record that g_resolver_lookup_records() or
+ * g_resolver_lookup_records_async() should retrieve. The records are returned
+ * as lists of #GVariant tuples. Each record type has different values in
+ * the variant tuples returned.
+ *
+ * %G_RESOLVER_RECORD_SRV records are returned as variants with the signature
+ * `(qqqs)`, containing a `guint16` with the priority, a `guint16` with the
+ * weight, a `guint16` with the port, and a string of the hostname.
+ *
+ * %G_RESOLVER_RECORD_MX records are returned as variants with the signature
+ * `(qs)`, representing a `guint16` with the preference, and a string containing
+ * the mail exchanger hostname.
+ *
+ * %G_RESOLVER_RECORD_TXT records are returned as variants with the signature
+ * `(as)`, representing an array of the strings in the text record. Note: Most TXT
+ * records only contain a single string, but
+ * [RFC 1035](https://tools.ietf.org/html/rfc1035#section-3.3.14) does allow a
+ * record to contain multiple strings. The RFC which defines the interpretation
+ * of a specific TXT record will likely require concatenation of multiple
+ * strings if they are present, as with
+ * [RFC 7208](https://tools.ietf.org/html/rfc7208#section-3.3).
+ *
+ * %G_RESOLVER_RECORD_SOA records are returned as variants with the signature
+ * `(ssuuuuu)`, representing a string containing the primary name server, a
+ * string containing the administrator, the serial as a `guint32`, the refresh
+ * interval as a `guint32`, the retry interval as a `guint32`, the expire timeout
+ * as a `guint32`, and the TTL as a `guint32`.
+ *
+ * %G_RESOLVER_RECORD_NS records are returned as variants with the signature
+ * `(s)`, representing a string of the hostname of the name server.
+ */
 export declare enum ResolverRecordType {
+    /** look up DNS SRV records for a domain */
     SRV = 1,
+    /** look up DNS MX records for a domain */
     MX = 2,
+    /** look up DNS TXT records for a name */
     TXT = 3,
+    /** look up DNS SOA records for a zone */
     SOA = 4,
+    /** look up DNS NS records for a domain */
     NS = 5
 }
+/**
+ * An error code used with %G_RESOURCE_ERROR in a #GError returned
+ * from a #GResource routine.
+ */
 export declare enum ResourceError {
+    /** no file was found at the requested path */
     NOT_FOUND = 0,
+    /** unknown error */
     INTERNAL = 1
 }
+/**
+ * Describes an event occurring on a #GSocketClient. See the
+ * #GSocketClient::event signal for more details.
+ *
+ * Additional values may be added to this type in the future.
+ */
 export declare enum SocketClientEvent {
+    /** The client is doing a DNS lookup. */
     RESOLVING = 0,
+    /** The client has completed a DNS lookup. */
     RESOLVED = 1,
+    /**
+     * The client is connecting to a remote
+     * host (either a proxy or the destination server).
+     */
     CONNECTING = 2,
+    /**
+     * The client has connected to a remote
+     * host.
+     */
     CONNECTED = 3,
+    /**
+     * The client is negotiating
+     * with a proxy to connect to the destination server.
+     */
     PROXY_NEGOTIATING = 4,
+    /**
+     * The client has negotiated
+     * with the proxy server.
+     */
     PROXY_NEGOTIATED = 5,
+    /**
+     * The client is performing a
+     * TLS handshake.
+     */
     TLS_HANDSHAKING = 6,
+    /**
+     * The client has performed a
+     * TLS handshake.
+     */
     TLS_HANDSHAKED = 7,
+    /**
+     * The client is done with a particular
+     * #GSocketConnectable.
+     */
     COMPLETE = 8
 }
+/**
+ * The protocol family of a #GSocketAddress. (These values are
+ * identical to the system defines %AF_INET, %AF_INET6 and %AF_UNIX,
+ * if available.)
+ */
 export declare enum SocketFamily {
+    /** no address family */
     INVALID = 0,
+    /** the UNIX domain family */
     UNIX = 1,
+    /** the IPv4 family */
     IPV4 = 2,
+    /** the IPv6 family */
     IPV6 = 10
 }
+/**
+ * Describes an event occurring on a #GSocketListener. See the
+ * #GSocketListener::event signal for more details.
+ *
+ * Additional values may be added to this type in the future.
+ */
 export declare enum SocketListenerEvent {
+    /** The listener is about to bind a socket. */
     BINDING = 0,
+    /** The listener has bound a socket. */
     BOUND = 1,
+    /**
+     * The listener is about to start
+     * listening on this socket.
+     */
     LISTENING = 2,
+    /**
+     * The listener is now listening on
+     * this socket.
+     */
     LISTENED = 3
 }
+/**
+ * A protocol identifier is specified when creating a #GSocket, which is a
+ * family/type specific identifier, where 0 means the default protocol for
+ * the particular family/type.
+ *
+ * This enum contains a set of commonly available and used protocols. You
+ * can also pass any other identifiers handled by the platform in order to
+ * use protocols not listed here.
+ */
 export declare enum SocketProtocol {
+    /** The protocol type is unknown */
     UNKNOWN = -1,
+    /** The default protocol for the family/type */
     DEFAULT = 0,
+    /** TCP over IP */
     TCP = 6,
+    /** UDP over IP */
     UDP = 17,
+    /** SCTP over IP */
     SCTP = 132
 }
+/**
+ * Flags used when creating a #GSocket. Some protocols may not implement
+ * all the socket types.
+ */
 export declare enum SocketType {
+    /** Type unknown or wrong */
     INVALID = 0,
+    /** Reliable connection-based byte streams (e.g. TCP). */
     STREAM = 1,
+    /**
+     * Connectionless, unreliable datagram passing.
+     * (e.g. UDP)
+     */
     DATAGRAM = 2,
+    /**
+     * Reliable connection-based passing of datagrams
+     * of fixed maximum length (e.g. SCTP).
+     */
     SEQPACKET = 3
 }
+/** The client authentication mode for a #GTlsServerConnection. */
 export declare enum TlsAuthenticationMode {
+    /** client authentication not required */
     NONE = 0,
+    /** client authentication is requested */
     REQUESTED = 1,
+    /** client authentication is required */
     REQUIRED = 2
 }
+/**
+ * Flags for g_tls_interaction_request_certificate(),
+ * g_tls_interaction_request_certificate_async(), and
+ * g_tls_interaction_invoke_request_certificate().
+ */
 export declare enum TlsCertificateRequestFlags {
+    /** No flags */
     NONE = 0
 }
+/**
+ * An error code used with %G_TLS_CHANNEL_BINDING_ERROR in a #GError to
+ * indicate a TLS channel binding retrieval error.
+ */
 export declare enum TlsChannelBindingError {
+    /**
+     * Either entire binding
+     * retrieval facility or specific binding type is not implemented in the
+     * TLS backend.
+     */
     NOT_IMPLEMENTED = 0,
+    /**
+     * The handshake is not yet
+     * complete on the connection which is a strong requirement for any existing
+     * binding type.
+     */
     INVALID_STATE = 1,
+    /**
+     * Handshake is complete but
+     * binding data is not available. That normally indicates the TLS
+     * implementation failed to provide the binding data. For example, some
+     * implementations do not provide a peer certificate for resumed connections.
+     */
     NOT_AVAILABLE = 2,
+    /**
+     * Binding type is not supported
+     * on the current connection. This error could be triggered when requesting
+     * `tls-server-end-point` binding data for a certificate which has no hash
+     * function or uses multiple hash functions.
+     */
     NOT_SUPPORTED = 3,
+    /**
+     * Any other backend error
+     * preventing binding data retrieval.
+     */
     GENERAL_ERROR = 4
 }
+/**
+ * The type of TLS channel binding data to retrieve from #GTlsConnection
+ * or #GDtlsConnection, as documented by RFC 5929 or RFC 9266. The
+ * [`tls-unique-for-telnet`](https://tools.ietf.org/html/rfc5929#section-5)
+ * binding type is not currently implemented.
+ */
 export declare enum TlsChannelBindingType {
+    /**
+     * [`tls-unique`](https://tools.ietf.org/html/rfc5929#section-3) binding
+     * type
+     */
     UNIQUE = 0,
+    /**
+     * [`tls-server-end-point`](https://tools.ietf.org/html/rfc5929#section-4)
+     * binding type
+     */
     SERVER_END_POINT = 1,
+    /**
+     * `tls-exporter` binding
+     * type. Since: 2.74
+     */
     EXPORTER = 2
 }
+/**
+ * Flags for g_tls_database_lookup_certificate_for_handle(),
+ * g_tls_database_lookup_certificate_issuer(),
+ * and g_tls_database_lookup_certificates_issued_by().
+ */
 export declare enum TlsDatabaseLookupFlags {
+    /** No lookup flags */
     NONE = 0,
+    /**
+     * Restrict lookup to certificates that have
+     * a private key.
+     */
     KEYPAIR = 1
 }
+/**
+ * An error code used with %G_TLS_ERROR in a #GError returned from a
+ * TLS-related routine.
+ */
 export declare enum TlsError {
+    /** No TLS provider is available */
     UNAVAILABLE = 0,
+    /** Miscellaneous TLS error */
     MISC = 1,
+    /**
+     * The certificate presented could not
+     * be parsed or failed validation.
+     */
     BAD_CERTIFICATE = 2,
+    /**
+     * The TLS handshake failed because the
+     * peer does not seem to be a TLS server.
+     */
     NOT_TLS = 3,
+    /**
+     * The TLS handshake failed because the
+     * peer's certificate was not acceptable.
+     */
     HANDSHAKE = 4,
+    /**
+     * The TLS handshake failed because
+     * the server requested a client-side certificate, but none was
+     * provided. See g_tls_connection_set_certificate().
+     */
     CERTIFICATE_REQUIRED = 5,
+    /**
+     * The TLS connection was closed without proper
+     * notice, which may indicate an attack. See
+     * g_tls_connection_set_require_close_notify().
+     */
     EOF = 6,
+    /**
+     * The TLS handshake failed
+     * because the client sent the fallback SCSV, indicating a protocol
+     * downgrade attack. Since: 2.60
+     */
     INAPPROPRIATE_FALLBACK = 7,
+    /**
+     * The certificate failed
+     * to load because a password was incorrect. Since: 2.72
+     */
     BAD_CERTIFICATE_PASSWORD = 8
 }
+/**
+ * #GTlsInteractionResult is returned by various functions in #GTlsInteraction
+ * when finishing an interaction request.
+ */
 export declare enum TlsInteractionResult {
+    /**
+     * The interaction was unhandled (i.e. not
+     * implemented).
+     */
     UNHANDLED = 0,
+    /**
+     * The interaction completed, and resulting data
+     * is available.
+     */
     HANDLED = 1,
+    /**
+     * The interaction has failed, or was cancelled.
+     * and the operation should be aborted.
+     */
     FAILED = 2
 }
+/**
+ * The TLS or DTLS protocol version used by a #GTlsConnection or
+ * #GDtlsConnection. The integer values of these versions are sequential
+ * to ensure newer known protocol versions compare greater than older
+ * known versions. Any known DTLS protocol version will compare greater
+ * than any SSL or TLS protocol version. The protocol version may be
+ * %G_TLS_PROTOCOL_VERSION_UNKNOWN if the TLS backend supports a newer
+ * protocol version that GLib does not yet know about. This means that
+ * it's possible for an unknown DTLS protocol version to compare less
+ * than the TLS protocol versions.
+ */
 export declare enum TlsProtocolVersion {
+    /** No protocol version or unknown protocol version */
     UNKNOWN = 0,
+    /** SSL 3.0, which is insecure and should not be used */
     SSL_3_0 = 1,
+    /** TLS 1.0, which is insecure and should not be used */
     TLS_1_0 = 2,
+    /** TLS 1.1, which is insecure and should not be used */
     TLS_1_1 = 3,
+    /** TLS 1.2, defined by [RFC 5246](https://datatracker.ietf.org/doc/html/rfc5246) */
     TLS_1_2 = 4,
+    /** TLS 1.3, defined by [RFC 8446](https://datatracker.ietf.org/doc/html/rfc8446) */
     TLS_1_3 = 5,
+    /** DTLS 1.0, which is insecure and should not be used */
     DTLS_1_0 = 201,
+    /** DTLS 1.2, defined by [RFC 6347](https://datatracker.ietf.org/doc/html/rfc6347) */
     DTLS_1_2 = 202
 }
+/**
+ * When to allow rehandshaking. See
+ * g_tls_connection_set_rehandshake_mode().
+ */
 export declare enum TlsRehandshakeMode {
+    /** Never allow rehandshaking */
     NEVER = 0,
+    /** Allow safe rehandshaking only */
     SAFELY = 1,
+    /** Allow unsafe rehandshaking */
     UNSAFELY = 2
 }
+/**
+ * The type of name used by a #GUnixSocketAddress.
+ * %G_UNIX_SOCKET_ADDRESS_PATH indicates a traditional unix domain
+ * socket bound to a filesystem path. %G_UNIX_SOCKET_ADDRESS_ANONYMOUS
+ * indicates a socket not bound to any name (eg, a client-side socket,
+ * or a socket created with socketpair()).
+ *
+ * For abstract sockets, there are two incompatible ways of naming
+ * them; the man pages suggest using the entire `struct sockaddr_un`
+ * as the name, padding the unused parts of the %sun_path field with
+ * zeroes; this corresponds to %G_UNIX_SOCKET_ADDRESS_ABSTRACT_PADDED.
+ * However, many programs instead just use a portion of %sun_path, and
+ * pass an appropriate smaller length to bind() or connect(). This is
+ * %G_UNIX_SOCKET_ADDRESS_ABSTRACT.
+ */
 export declare enum UnixSocketAddressType {
+    /** invalid */
     INVALID = 0,
+    /** anonymous */
     ANONYMOUS = 1,
+    /** a filesystem path */
     PATH = 2,
+    /** an abstract name */
     ABSTRACT = 3,
+    /**
+     * an abstract name, 0-padded
+     * to the full length of a unix socket name
+     */
     ABSTRACT_PADDED = 4
 }
+/**
+ * Used to select the type of data format to use for #GZlibDecompressor
+ * and #GZlibCompressor.
+ */
 export declare enum ZlibCompressorFormat {
+    /** deflate compression with zlib header */
     ZLIB = 0,
+    /** gzip file format */
     GZIP = 1,
+    /** deflate compression with no header */
     RAW = 2
 }
+/** Flags used when creating a #GAppInfo. */
 export declare enum AppInfoCreateFlags {
+    /** No flags. */
     NONE = 0,
+    /** Application opens in a terminal window. */
     NEEDS_TERMINAL = 1,
+    /** Application supports URI arguments. */
     SUPPORTS_URIS = 2,
+    /** Application supports startup notification. Since 2.26 */
     SUPPORTS_STARTUP_NOTIFICATION = 4
 }
+/** Flags used to define the behaviour of a #GApplication. */
 export declare enum ApplicationFlags {
+    /** Default flags. */
     FLAGS_NONE = 0,
+    /** Default flags. */
     DEFAULT_FLAGS = 0,
+    /**
+     * Run as a service. In this mode, registration
+     * fails if the service is already running, and the application
+     * will initially wait up to 10 seconds for an initial activation
+     * message to arrive.
+     */
     IS_SERVICE = 1,
+    /** Don't try to become the primary instance. */
     IS_LAUNCHER = 2,
+    /**
+     * This application handles opening files (in
+     * the primary instance). Note that this flag only affects the default
+     * implementation of local_command_line(), and has no effect if
+     * %G_APPLICATION_HANDLES_COMMAND_LINE is given.
+     * See g_application_run() for details.
+     */
     HANDLES_OPEN = 4,
+    /**
+     * This application handles command line
+     * arguments (in the primary instance). Note that this flag only affect
+     * the default implementation of local_command_line().
+     * See g_application_run() for details.
+     */
     HANDLES_COMMAND_LINE = 8,
+    /**
+     * Send the environment of the
+     * launching process to the primary instance. Set this flag if your
+     * application is expected to behave differently depending on certain
+     * environment variables. For instance, an editor might be expected
+     * to use the `GIT_COMMITTER_NAME` environment variable
+     * when editing a git commit message. The environment is available
+     * to the #GApplication::command-line signal handler, via
+     * g_application_command_line_getenv().
+     */
     SEND_ENVIRONMENT = 16,
+    /**
+     * Make no attempts to do any of the typical
+     * single-instance application negotiation, even if the application
+     * ID is given.  The application neither attempts to become the
+     * owner of the application ID nor does it check if an existing
+     * owner already exists.  Everything occurs in the local process.
+     * Since: 2.30.
+     */
     NON_UNIQUE = 32,
+    /**
+     * Allow users to override the
+     * application ID from the command line with `--gapplication-app-id`.
+     * Since: 2.48
+     */
     CAN_OVERRIDE_APP_ID = 64,
+    /**
+     * Allow another instance to take over
+     * the bus name. Since: 2.60
+     */
     ALLOW_REPLACEMENT = 128,
+    /**
+     * Take over from another instance. This flag is
+     * usually set by passing `--gapplication-replace` on the commandline.
+     * Since: 2.60
+     */
     REPLACE = 256
 }
+/**
+ * #GAskPasswordFlags are used to request specific information from the
+ * user, or to notify the user of their choices in an authentication
+ * situation.
+ */
 export declare enum AskPasswordFlags {
+    /** operation requires a password. */
     NEED_PASSWORD = 1,
+    /** operation requires a username. */
     NEED_USERNAME = 2,
+    /** operation requires a domain. */
     NEED_DOMAIN = 4,
+    /** operation supports saving settings. */
     SAVING_SUPPORTED = 8,
+    /** operation supports anonymous users. */
     ANONYMOUS_SUPPORTED = 16,
+    /** operation takes TCRYPT parameters (Since: 2.58) */
     TCRYPT = 32
 }
+/** Flags used in g_bus_own_name(). */
 export declare enum BusNameOwnerFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Allow another message bus connection to claim the name. */
     ALLOW_REPLACEMENT = 1,
+    /**
+     * If another message bus connection owns the name and have
+     * specified %G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT, then take the name from the other connection.
+     */
     REPLACE = 2,
+    /**
+     * If another message bus connection owns the name, immediately return an error
+     * from [func@Gio.bus_own_name] rather than entering the waiting queue for that
+     * name.
+     */
     DO_NOT_QUEUE = 4
 }
+/** Flags used in g_bus_watch_name(). */
 export declare enum BusNameWatcherFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * If no-one owns the name when
+     * beginning to watch the name, ask the bus to launch an owner for the
+     * name.
+     */
     AUTO_START = 1
 }
+/** Flags used when calling a g_converter_convert(). */
 export declare enum ConverterFlags {
+    /** No flags. */
     NONE = 0,
+    /** At end of input data */
     INPUT_AT_END = 1,
+    /** Flush data */
     FLUSH = 2
 }
+/** Flags used in g_dbus_connection_call() and similar APIs. */
 export declare enum DBusCallFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * The bus must not launch
+     * an owner for the destination name in response to this method
+     * invocation.
+     */
     NO_AUTO_START = 1,
+    /**
+     * the caller is prepared to
+     * wait for interactive authorization. Since 2.46.
+     */
     ALLOW_INTERACTIVE_AUTHORIZATION = 2
 }
+/** Capabilities negotiated with the remote peer. */
 export declare enum DBusCapabilityFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * The connection
+     * supports exchanging UNIX file descriptors with the remote peer.
+     */
     UNIX_FD_PASSING = 1
 }
+/** Flags used when creating a new #GDBusConnection. */
 export declare enum DBusConnectionFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Perform authentication against server. */
     AUTHENTICATION_CLIENT = 1,
+    /** Perform authentication against client. */
     AUTHENTICATION_SERVER = 2,
+    /**
+     * When
+     * authenticating as a server, allow the anonymous authentication
+     * method.
+     */
     AUTHENTICATION_ALLOW_ANONYMOUS = 4,
+    /**
+     * Pass this flag if connecting to a peer that is a
+     * message bus. This means that the Hello() method will be invoked as part of the connection setup.
+     */
     MESSAGE_BUS_CONNECTION = 8,
+    /**
+     * If set, processing of D-Bus messages is
+     * delayed until g_dbus_connection_start_message_processing() is called.
+     */
     DELAY_MESSAGE_PROCESSING = 16,
+    /**
+     * When authenticating
+     * as a server, require the UID of the peer to be the same as the UID of the server. (Since: 2.68)
+     */
     AUTHENTICATION_REQUIRE_SAME_USER = 32,
+    /**
+     * When authenticating, try to use
+     * protocols that work across a Linux user namespace boundary, even if this
+     * reduces interoperability with older D-Bus implementations. This currently
+     * affects client-side `EXTERNAL` authentication, for which this flag makes
+     * connections to a server in another user namespace succeed, but causes
+     * a deadlock when connecting to a GDBus server older than 2.73.3. Since: 2.74
+     */
     CROSS_NAMESPACE = 64
 }
+/** Flags describing the behavior of a #GDBusInterfaceSkeleton instance. */
 export declare enum DBusInterfaceSkeletonFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Each method invocation is handled in
+     * a thread dedicated to the invocation. This means that the method implementation can use blocking IO
+     * without blocking any other part of the process. It also means that the method implementation must
+     * use locking to access data structures used by other threads.
+     */
     HANDLE_METHOD_INVOCATIONS_IN_THREAD = 1
 }
+/** Message flags used in #GDBusMessage. */
 export declare enum DBusMessageFlags {
+    /** No flags set. */
     NONE = 0,
+    /** A reply is not expected. */
     NO_REPLY_EXPECTED = 1,
+    /**
+     * The bus must not launch an
+     * owner for the destination name in response to this message.
+     */
     NO_AUTO_START = 2,
+    /**
+     * If set on a method
+     * call, this flag means that the caller is prepared to wait for interactive
+     * authorization. Since 2.46.
+     */
     ALLOW_INTERACTIVE_AUTHORIZATION = 4
 }
+/** Flags used when constructing a #GDBusObjectManagerClient. */
 export declare enum DBusObjectManagerClientFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * If not set and the
+     * manager is for a well-known name, then request the bus to launch
+     * an owner for the name if no-one owns the name. This flag can only
+     * be used in managers for well-known names.
+     */
     DO_NOT_AUTO_START = 1
 }
+/** Flags describing the access control of a D-Bus property. */
 export declare enum DBusPropertyInfoFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Property is readable. */
     READABLE = 1,
+    /** Property is writable. */
     WRITABLE = 2
 }
+/** Flags used when constructing an instance of a #GDBusProxy derived class. */
 export declare enum DBusProxyFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Don't load properties. */
     DO_NOT_LOAD_PROPERTIES = 1,
+    /** Don't connect to signals on the remote object. */
     DO_NOT_CONNECT_SIGNALS = 2,
+    /**
+     * If the proxy is for a well-known name,
+     * do not ask the bus to launch an owner during proxy initialization or a method call.
+     * This flag is only meaningful in proxies for well-known names.
+     */
     DO_NOT_AUTO_START = 4,
+    /**
+     * If set, the property value for any __invalidated property__ will be (asynchronously) retrieved upon receiving the `PropertiesChanged` D-Bus signal and the property will not cause emission of the #GDBusProxy::g-properties-changed signal. When the value is received the #GDBusProxy::g-properties-changed signal is emitted for the property along with the retrieved value. Since 2.32.
+     */
     GET_INVALIDATED_PROPERTIES = 8,
+    /**
+     * If the proxy is for a well-known name,
+     * do not ask the bus to launch an owner during proxy initialization, but allow it to be
+     * autostarted by a method call. This flag is only meaningful in proxies for well-known names,
+     * and only if %G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START is not also specified.
+     */
     DO_NOT_AUTO_START_AT_CONSTRUCTION = 16,
+    /**
+     * Don't actually send the AddMatch D-Bus
+     * call for this signal subscription. This gives you more control
+     * over which match rules you add (but you must add them manually). (Since: 2.72)
+     */
     NO_MATCH_RULE = 32
 }
+/** Flags used when sending #GDBusMessages on a #GDBusConnection. */
 export declare enum DBusSendMessageFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Do not automatically
+     * assign a serial number from the #GDBusConnection object when
+     * sending a message.
+     */
     PRESERVE_SERIAL = 1
 }
+/** Flags used when creating a #GDBusServer. */
 export declare enum DBusServerFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * All #GDBusServer::new-connection
+     * signals will run in separated dedicated threads (see signal for
+     * details).
+     */
     RUN_IN_THREAD = 1,
+    /**
+     * Allow the anonymous
+     * authentication method.
+     */
     AUTHENTICATION_ALLOW_ANONYMOUS = 2,
+    /**
+     * Require the UID of the
+     * peer to be the same as the UID of the server when authenticating. (Since: 2.68)
+     */
     AUTHENTICATION_REQUIRE_SAME_USER = 4
 }
+/**
+ * Flags used when subscribing to signals via g_dbus_connection_signal_subscribe().
+ */
 export declare enum DBusSignalFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Don't actually send the AddMatch
+     * D-Bus call for this signal subscription.  This gives you more control
+     * over which match rules you add (but you must add them manually).
+     */
     NO_MATCH_RULE = 1,
+    /**
+     * Match first arguments that
+     * contain a bus or interface name with the given namespace.
+     */
     MATCH_ARG0_NAMESPACE = 2,
+    /**
+     * Match first arguments that
+     * contain an object path that is either equivalent to the given path,
+     * or one of the paths is a subpath of the other.
+     */
     MATCH_ARG0_PATH = 4
 }
+/** Flags passed to g_dbus_connection_register_subtree(). */
 export declare enum DBusSubtreeFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Method calls to objects not in the enumerated range
+     * will still be dispatched. This is useful if you want
+     * to dynamically spawn objects in the subtree.
+     */
     DISPATCH_TO_UNENUMERATED_NODES = 1
 }
+/** Flags used when starting a drive. */
 export declare enum DriveStartFlags {
+    /** No flags set. */
     NONE = 0
 }
+/** Flags specifying the behaviour of an attribute. */
 export declare enum FileAttributeInfoFlags {
+    /** no flags set. */
     NONE = 0,
+    /** copy the attribute values when the file is copied. */
     COPY_WITH_FILE = 1,
+    /** copy the attribute values when the file is moved. */
     COPY_WHEN_MOVED = 2
 }
+/** Flags used when copying or moving files. */
 export declare enum FileCopyFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Overwrite any existing files */
     OVERWRITE = 1,
+    /** Make a backup of any existing files. */
     BACKUP = 2,
+    /** Don't follow symlinks. */
     NOFOLLOW_SYMLINKS = 4,
+    /**
+     * Copy all file metadata instead of just default set used for copy (see #GFileInfo).
+     */
     ALL_METADATA = 8,
+    /** Don't use copy and delete fallback if native move not supported. */
     NO_FALLBACK_FOR_MOVE = 16,
+    /**
+     * Leaves target file with default perms, instead of setting the source file perms.
+     */
     TARGET_DEFAULT_PERMS = 32,
+    /**
+     * Use default modification
+     * timestamps instead of copying them from the source file. Since 2.80
+     */
     TARGET_DEFAULT_MODIFIED_TIME = 64
 }
+/** Flags used when an operation may create a file. */
 export declare enum FileCreateFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Create a file that can only be
+     * accessed by the current user.
+     */
     PRIVATE = 1,
+    /**
+     * Replace the destination
+     * as if it didn't exist before. Don't try to keep any old
+     * permissions, replace instead of following links. This
+     * is generally useful if you're doing a "copy over"
+     * rather than a "save new version of" replace operation.
+     * You can think of it as "unlink destination" before
+     * writing to it, although the implementation may not
+     * be exactly like that. This flag can only be used with
+     * g_file_replace() and its variants, including g_file_replace_contents().
+     * Since 2.20
+     */
     REPLACE_DESTINATION = 2
 }
+/** Flags that can be used with g_file_measure_disk_usage(). */
 export declare enum FileMeasureFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Report any error encountered
+     * while traversing the directory tree.  Normally errors are only
+     * reported for the toplevel file.
+     */
     REPORT_ANY_ERROR = 2,
+    /**
+     * Tally usage based on apparent file
+     * sizes.  Normally, the block-size is used, if available, as this is a
+     * more accurate representation of disk space used.
+     * Compare with `du --apparent-size`.
+     * Since GLib 2.78. and similarly to `du` since GNU Coreutils 9.2, this will
+     * ignore the sizes of file types other than regular files and links, as the
+     * sizes of other file types are not specified in a standard way.
+     */
     APPARENT_SIZE = 4,
+    /**
+     * Do not cross mount point boundaries.
+     * Compare with `du -x`.
+     */
     NO_XDEV = 8
 }
+/** Flags used to set what a #GFileMonitor will watch for. */
 export declare enum FileMonitorFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Watch for mount events. */
     WATCH_MOUNTS = 1,
+    /**
+     * Pair DELETED and CREATED events caused
+     * by file renames (moves) and send a single G_FILE_MONITOR_EVENT_MOVED
+     * event instead (NB: not supported on all backends; the default
+     * behaviour -without specifying this flag- is to send single DELETED
+     * and CREATED events).  Deprecated since 2.46: use
+     * %G_FILE_MONITOR_WATCH_MOVES instead.
+     */
     SEND_MOVED = 2,
+    /**
+     * Watch for changes to the file made
+     * via another hard link. Since 2.36.
+     */
     WATCH_HARD_LINKS = 4,
+    /**
+     * Watch for rename operations on a
+     * monitored directory.  This causes %G_FILE_MONITOR_EVENT_RENAMED,
+     * %G_FILE_MONITOR_EVENT_MOVED_IN and %G_FILE_MONITOR_EVENT_MOVED_OUT
+     * events to be emitted when possible.  Since: 2.46.
+     */
     WATCH_MOVES = 8
 }
+/** Flags used when querying a #GFileInfo. */
 export declare enum FileQueryInfoFlags {
+    /** No flags set. */
     NONE = 0,
+    /** Don't follow symlinks. */
     NOFOLLOW_SYMLINKS = 1
 }
+/** GIOStreamSpliceFlags determine how streams should be spliced. */
 export declare enum IOStreamSpliceFlags {
+    /** Do not close either stream. */
     NONE = 0,
+    /**
+     * Close the first stream after
+     * the splice.
+     */
     CLOSE_STREAM1 = 1,
+    /**
+     * Close the second stream after
+     * the splice.
+     */
     CLOSE_STREAM2 = 2,
+    /**
+     * Wait for both splice operations to finish
+     * before calling the callback.
+     */
     WAIT_FOR_BOTH = 4
 }
+/** Flags used when mounting a mount. */
 export declare enum MountMountFlags {
+    /** No flags set. */
     NONE = 0
 }
+/** Flags used when an unmounting a mount. */
 export declare enum MountUnmountFlags {
+    /** No flags set. */
     NONE = 0,
+    /**
+     * Unmount even if there are outstanding
+     * file operations on the mount.
+     */
     FORCE = 1
 }
+/** GOutputStreamSpliceFlags determine how streams should be spliced. */
 export declare enum OutputStreamSpliceFlags {
+    /** Do not close either stream. */
     NONE = 0,
+    /**
+     * Close the source stream after
+     * the splice.
+     */
     CLOSE_SOURCE = 1,
+    /**
+     * Close the target stream after
+     * the splice.
+     */
     CLOSE_TARGET = 2
 }
+/** Flags to modify lookup behavior. */
 export declare enum ResolverNameLookupFlags {
+    /** default behavior (same as g_resolver_lookup_by_name()) */
     DEFAULT = 0,
+    /** only resolve ipv4 addresses */
     IPV4_ONLY = 1,
+    /** only resolve ipv6 addresses */
     IPV6_ONLY = 2
 }
+/**
+ * GResourceFlags give information about a particular file inside a resource
+ * bundle.
+ */
 export declare enum ResourceFlags {
+    /** No flags set. */
     NONE = 0,
+    /** The file is compressed. */
     COMPRESSED = 1
 }
+/** GResourceLookupFlags determine how resource path lookups are handled. */
 export declare enum ResourceLookupFlags {
+    /** No flags set. */
     NONE = 0
 }
+/**
+ * Flags used when creating a binding.
+ *
+ * These flags determine in which direction the binding works. The default is to
+ * synchronize in both directions.
+ */
 export declare enum SettingsBindFlags {
+    /** Equivalent to `G_SETTINGS_BIND_GET|G_SETTINGS_BIND_SET` */
     DEFAULT = 0,
+    /**
+     * Update the [class@GObject.Object] property when the setting changes.
+     * It is an error to use this flag if the property is not writable.
+     */
     GET = 1,
+    /**
+     * Update the setting when the [class@GObject.Object] property changes.
+     * It is an error to use this flag if the property is not readable.
+     */
     SET = 2,
+    /** Do not try to bind a ‘sensitivity’ property to the writability of the setting */
     NO_SENSITIVITY = 4,
+    /**
+     * When set in addition to [flags@Gio.SettingsBindFlags.GET],
+     * set the [class@GObject.Object] property
+     * value initially from the setting, but do not listen for changes of the setting
+     */
     GET_NO_CHANGES = 8,
+    /**
+     * When passed to [method@Gio.Settings.bind],
+     * uses a pair of mapping functions that invert
+     * the boolean value when mapping between the setting and the property.  The setting and property must both
+     * be booleans.  You cannot pass this flag to [method@Gio.Settings.bind_with_mapping].
+     */
     INVERT_BOOLEAN = 16
 }
+/**
+ * Flags used in g_socket_receive_message() and g_socket_send_message().
+ * The flags listed in the enum are some commonly available flags, but the
+ * values used for them are the same as on the platform, and any other flags
+ * are passed in/out as is. So to use a platform specific flag, just include
+ * the right system header and pass in the flag.
+ */
 export declare enum SocketMsgFlags {
+    /** No flags. */
     NONE = 0,
+    /** Request to send/receive out of band data. */
     OOB = 1,
+    /**
+     * Read data from the socket without removing it from
+     * the queue.
+     */
     PEEK = 2,
+    /**
+     * Don't use a gateway to send out the packet,
+     * only send to hosts on directly connected networks.
+     */
     DONTROUTE = 4
 }
+/**
+ * Flags to define the behaviour of a #GSubprocess.
+ *
+ * Note that the default for stdin is to redirect from `/dev/null`.  For
+ * stdout and stderr the default are for them to inherit the
+ * corresponding descriptor from the calling process.
+ *
+ * Note that it is a programmer error to mix 'incompatible' flags.  For
+ * example, you may not request both %G_SUBPROCESS_FLAGS_STDOUT_PIPE and
+ * %G_SUBPROCESS_FLAGS_STDOUT_SILENCE.
+ */
 export declare enum SubprocessFlags {
+    /** No flags. */
     NONE = 0,
+    /**
+     * create a pipe for the stdin of the
+     * spawned process that can be accessed with
+     * g_subprocess_get_stdin_pipe().
+     */
     STDIN_PIPE = 1,
+    /**
+     * stdin is inherited from the
+     * calling process.
+     */
     STDIN_INHERIT = 2,
+    /**
+     * create a pipe for the stdout of the
+     * spawned process that can be accessed with
+     * g_subprocess_get_stdout_pipe().
+     */
     STDOUT_PIPE = 4,
+    /**
+     * silence the stdout of the spawned
+     * process (ie: redirect to `/dev/null`).
+     */
     STDOUT_SILENCE = 8,
+    /**
+     * create a pipe for the stderr of the
+     * spawned process that can be accessed with
+     * g_subprocess_get_stderr_pipe().
+     */
     STDERR_PIPE = 16,
+    /**
+     * silence the stderr of the spawned
+     * process (ie: redirect to `/dev/null`).
+     */
     STDERR_SILENCE = 32,
+    /**
+     * merge the stderr of the spawned
+     * process with whatever the stdout happens to be.  This is a good way
+     * of directing both streams to a common log file, for example.
+     */
     STDERR_MERGE = 64,
+    /**
+     * spawned processes will inherit the
+     * file descriptors of their parent, unless those descriptors have
+     * been explicitly marked as close-on-exec.  This flag has no effect
+     * over the "standard" file descriptors (stdin, stdout, stderr).
+     */
     INHERIT_FDS = 128,
+    /**
+     * if path searching is
+     * needed when spawning the subprocess, use the `PATH` in the launcher
+     * environment. (Since: 2.72)
+     */
     SEARCH_PATH_FROM_ENVP = 256
 }
+/** Flags to define future #GTestDBus behaviour. */
 export declare enum TestDBusFlags {
+    /** No flags. */
     NONE = 0
 }
+/**
+ * A set of flags describing TLS certification validation. This can be
+ * used to describe why a particular certificate was rejected (for
+ * example, in #GTlsConnection::accept-certificate).
+ *
+ * GLib guarantees that if certificate verification fails, at least one
+ * flag will be set, but it does not guarantee that all possible flags
+ * will be set. Accordingly, you may not safely decide to ignore any
+ * particular type of error. For example, it would be incorrect to mask
+ * %G_TLS_CERTIFICATE_EXPIRED if you want to allow expired certificates,
+ * because this could potentially be the only error flag set even if
+ * other problems exist with the certificate.
+ */
 export declare enum TlsCertificateFlags {
+    /** No flags set. Since: 2.74 */
     NO_FLAGS = 0,
+    /**
+     * The signing certificate authority is
+     * not known.
+     */
     UNKNOWN_CA = 1,
+    /**
+     * The certificate does not match the
+     * expected identity of the site that it was retrieved from.
+     */
     BAD_IDENTITY = 2,
+    /**
+     * The certificate's activation time
+     * is still in the future
+     */
     NOT_ACTIVATED = 4,
+    /** The certificate has expired */
     EXPIRED = 8,
+    /**
+     * The certificate has been revoked
+     * according to the #GTlsConnection's certificate revocation list.
+     */
     REVOKED = 16,
+    /**
+     * The certificate's algorithm is
+     * considered insecure.
+     */
     INSECURE = 32,
+    /**
+     * Some other error occurred validating
+     * the certificate
+     */
     GENERIC_ERROR = 64,
+    /**
+     * the combination of all of the above
+     * flags
+     */
     VALIDATE_ALL = 127
 }
+/** Flags for g_tls_database_verify_chain(). */
 export declare enum TlsDatabaseVerifyFlags {
+    /** No verification flags */
     NONE = 0
 }
+/** Various flags for the password. */
 export declare enum TlsPasswordFlags {
+    /** No flags */
     NONE = 0,
+    /** The password was wrong, and the user should retry. */
     RETRY = 2,
+    /**
+     * Hint to the user that the password has been
+     * wrong many times, and the user may not have many chances left.
+     */
     MANY_TRIES = 4,
+    /**
+     * Hint to the user that this is the last try to get
+     * this password right.
+     */
     FINAL_TRY = 8,
+    /**
+     * For PKCS #11, the user PIN is required.
+     * Since: 2.70.
+     */
     PKCS11_USER = 16,
+    /**
+     * For PKCS #11, the security officer
+     * PIN is required. Since: 2.70.
+     */
     PKCS11_SECURITY_OFFICER = 32,
+    /**
+     * For PKCS #11, the context-specific
+     * PIN is required. Since: 2.70.
+     */
     PKCS11_CONTEXT_SPECIFIC = 64
 }