@gridsuite/commons-ui 0.77.1 → 0.77.2

package/dist/translations/en/filterExpertEn.js

@@ -4,51 +4,51 @@ const filterExpertEn = {
   energySource: "Energy source",
   country: "Country",
   voltageRegulatorOn: "Voltage regulation",
-  PlannedActivePowerSetPoint: "Planning active power set point (MW)",
-  minP: "Minimum active power (MW)",
-  maxP: "Maximum active power (MW)",
-  targetP: "Active power target (MW)",
-  targetV: "Voltage target (kV)",
-  targetQ: "Reactive power target (MVar)",
+  PlannedActivePowerSetPoint: "Planning active power set point",
+  minP: "Minimum active power",
+  maxP: "Maximum active power",
+  targetP: "Active power target",
+  targetV: "Voltage target",
+  targetQ: "Reactive power target",
   connected: "Connected",
   maximumSectionCount: "Maximum number of sections",
   sectionCount: "Current number of sections",
   shuntCompensatorType: "Type",
   Capacitor: "Capacitor",
   Reactor: "Reactor",
-  maxQAtNominalV: "Available Qmax at nominal voltage (MVar)",
-  SwitchedOnMaxQAtNominalV: "Switch-on Q at nominal voltage (MVar)",
-  maxSusceptance: "Maximum available susceptance (S)",
-  SwitchedOnMaxSusceptance: "Switch-on susceptance (S)",
-  ratedS: "Rated nominal power (MVA)",
-  ratedS1: "Rated nominal power side 1 (MVA)",
-  ratedS2: "Rated nominal power side 2 (MVA)",
-  ratedS3: "Rated nominal power side 3 (MVA)",
+  maxQAtNominalV: "Available Qmax at nominal voltage",
+  SwitchedOnMaxQAtNominalV: "Switch-on Q at nominal voltage",
+  maxSusceptance: "Maximum available susceptance",
+  SwitchedOnMaxSusceptance: "Switch-on susceptance",
+  ratedS: "Rated nominal power",
+  ratedS1: "Rated nominal power side 1",
+  ratedS2: "Rated nominal power side 2",
+  ratedS3: "Rated nominal power side 3",
   marginalCost: "Cost",
   plannedOutageRate: "Planning outage rate",
   forcedOutageRate: "Forced outage rate",
   vlId: "Voltage level ID",
-  p0: "Constant P (MW)",
-  q0: "Constant Q (MVar)",
+  p0: "Constant P",
+  q0: "Constant Q",
   loadTapChangingCapabilities: "Ratio tap changer on-load",
   loadTapChangingCapabilities1: "Ratio tap changer 1 on-load",
   loadTapChangingCapabilities2: "Ratio tap changer 2 on-load",
   loadTapChangingCapabilities3: "Ratio tap changer 3 on-load",
-  ratioTargetV: "Ratio tap changer voltage set point (kV)",
-  ratioTargetV1: "Ratio tap changer 1 voltage set point (kV)",
-  ratioTargetV2: "Ratio tap changer 2 voltage set point (kV)",
-  ratioTargetV3: "Ratio tap changer 3 voltage set point (kV)",
-  magnetizingConductance: "Magnetizing conductance (μS)",
-  magnetizingConductance1: "Magnetizing conductance side 1 (μS)",
-  magnetizingConductance2: "Magnetizing conductance side 2 (μS)",
-  magnetizingConductance3: "Magnetizing conductance side 3 (μS)",
-  magnetizingSusceptance: "Magnetizing susceptance (μS)",
-  magnetizingSusceptance1: "Magnetizing susceptance side 1 (μS)",
-  magnetizingSusceptance2: "Magnetizing susceptance side 2 (μS)",
-  magnetizingSusceptance3: "Magnetizing susceptance side 3 (μS)",
-  vlNominalVoltage: "Voltage level nominal voltage (kV)",
-  lowVoltageLimit: "Low voltage limit (kV)",
-  highVoltageLimit: "High voltage limit (kV)",
+  ratioTargetV: "Ratio tap changer voltage set point",
+  ratioTargetV1: "Ratio tap changer 1 voltage set point",
+  ratioTargetV2: "Ratio tap changer 2 voltage set point",
+  ratioTargetV3: "Ratio tap changer 3 voltage set point",
+  magnetizingConductance: "Magnetizing conductance",
+  magnetizingConductance1: "Magnetizing conductance side 1",
+  magnetizingConductance2: "Magnetizing conductance side 2",
+  magnetizingConductance3: "Magnetizing conductance side 3",
+  magnetizingSusceptance: "Magnetizing susceptance",
+  magnetizingSusceptance1: "Magnetizing susceptance side 1",
+  magnetizingSusceptance2: "Magnetizing susceptance side 2",
+  magnetizingSusceptance3: "Magnetizing susceptance side 3",
+  vlNominalVoltage: "Voltage level nominal voltage",
+  lowVoltageLimit: "Low voltage limit",
+  highVoltageLimit: "High voltage limit",
   selectFilterDialogTitle: "Choose a filter",
   filter: "Filter",
   loadType: "Type",
@@ -88,20 +88,20 @@ const filterExpertEn = {
   substationProperty2: "Substation property 2",
   substationProperty1Twt: "Substation property 1",
   substationProperty2Twt: "Substation property 2",
-  ratedVoltage1KV: "Rated Voltage 1 (kV)",
-  ratedVoltage2KV: "Rated Voltage 2 (kV)",
-  ratedVoltage0KVTwt: "Rated Voltage 0 (kV)",
-  ratedVoltage1KVTwt: "Rated Voltage 1 (kV)",
-  ratedVoltage2KVTwt: "Rated Voltage 2 (kV)",
-  ratedVoltage3KVTwt: "Rated Voltage 3 (kV)",
+  ratedVoltage1KV: "Rated Voltage 1",
+  ratedVoltage2KV: "Rated Voltage 2",
+  ratedVoltage0KVTwt: "Rated Voltage 0",
+  ratedVoltage1KVTwt: "Rated Voltage 1",
+  ratedVoltage2KVTwt: "Rated Voltage 2",
+  ratedVoltage3KVTwt: "Rated Voltage 3",
   nominalVoltage1: "Nominal Voltage 1",
   nominalVoltage2: "Nominal Voltage 2",
   nominalVoltage3: "Nominal Voltage 3",
-  nominalVoltage1KV: "Nominal Voltage 1 (kV)",
-  nominalVoltage2KV: "Nominal Voltage 2 (kV)",
-  nominalVoltage1KVTwt: "Nominal Voltage 1 (kV)",
-  nominalVoltage2KVTwt: "Nominal Voltage 2 (kV)",
-  nominalVoltage3KVTwt: "Nominal Voltage 3 (kV)",
+  nominalVoltage1KV: "Nominal Voltage 1",
+  nominalVoltage2KV: "Nominal Voltage 2",
+  nominalVoltage1KVTwt: "Nominal Voltage 1",
+  nominalVoltage2KVTwt: "Nominal Voltage 2",
+  nominalVoltage3KVTwt: "Nominal Voltage 3",
   voltageLevelId1: "Voltage level ID 1",
   voltageLevelId2: "Voltage level ID 2",
   voltageLevelId1Twt: "Voltage level ID 1",
@@ -118,18 +118,18 @@ const filterExpertEn = {
   voltageLevelProperty1Twt: "Voltage level property 1",
   voltageLevelProperty2Twt: "Voltage level property 2",
   voltageLevelProperty3Twt: "Voltage level property 3",
-  "maxQAtNominalV.svar": "Q max at nominal voltage (MVar)",
-  "minQAtNominalV.svar": "Q min at nominal voltage (MVar)",
-  "fixQAtNominalV.svar": "Fixed part of Q at nominal voltage (MVar)",
-  "maxSusceptance.svar": "Susceptance max (S)",
-  "minSusceptance.svar": "Susceptance min (S)",
+  "maxQAtNominalV.svar": "Q max at nominal voltage",
+  "minQAtNominalV.svar": "Q min at nominal voltage",
+  "fixQAtNominalV.svar": "Fixed part of Q at nominal voltage",
+  "maxSusceptance.svar": "Susceptance max",
+  "minSusceptance.svar": "Susceptance min",
   regulationMode: "Regulation mode",
   "regulationMode.off": "Off",
   "regulationMode.voltage": "Voltage regulation",
   "regulationMode.reactivePower": "Reactive power regulation",
   voltageSetPoint: "Voltage set point",
-  activePowerSetPoint: "Active power set point (MW)",
-  reactivePowerSetPoint: "Reactive power set point (MVar)",
+  activePowerSetPoint: "Active power set point",
+  reactivePowerSetPoint: "Reactive power set point",
   remoteRegulatedTerminal: "Remote regulated terminal",
   regulatingTerminalVLId: "Voltage Level ID",
   regulatingTerminalConnectableId: "Equipment ID",
@@ -137,36 +137,36 @@ const filterExpertEn = {
   "regulationType.distant": "Remote regulation",
   "regulationType.local": "Local regulation",
   automate: "Automaton",
-  lowVoltageSetPoint: "Low voltage set point ",
+  lowVoltageSetPoint: "Low voltage set point",
   highVoltageSetPoint: "High voltage set point",
   lowVoltageThreshold: "Low voltage threshold",
   highVoltageThreshold: "High voltage threshold",
-  susceptanceFix: "Fixed part of susceptance ",
+  susceptanceFix: "Fixed part of susceptance",
   paired: "Paired",
   converterStationId1: "Converter station 1 ID",
   converterStationId2: "Converter station 2 ID",
   convertersMode: "Converters mode",
   side1RectifierSide2Inverter: "Flow (Side1->Side2)",
   side1InverterSide2Rectifier: "Flow (Side2->Side1)",
-  dcNominalVoltage: "DC nominal voltage (kV)",
-  converterStationNominalVoltage1: "Converter station 1 nominal voltage (kV)",
-  converterStationNominalVoltage2: "Converter station 2 nominal voltage (kV)",
+  dcNominalVoltage: "DC nominal voltage",
+  converterStationNominalVoltage1: "Converter station 1 nominal voltage",
+  converterStationNominalVoltage2: "Converter station 2 nominal voltage",
   country1: "Country 1",
   country2: "Country 2",
-  seriesResistance: "Series resistance (Ω)",
-  seriesResistance1: "Series resistance 1 (Ω)",
-  seriesResistance2: "Series resistance 2 (Ω)",
-  seriesResistance3: "Series resistance 3 (Ω)",
-  seriesReactance: "Series reactance (Ω)",
-  seriesReactance1: "Series reactance 1 (Ω)",
-  seriesReactance2: "Series reactance 2 (Ω)",
-  seriesReactance3: "Series reactance 3 (Ω)",
-  shuntConductance: "Shunt conductance (μS)",
-  shuntSusceptance: "Shunt susceptance (μS)",
-  shuntConductance1: "Shunt conductance 1 (μS)",
-  shuntSusceptance1: "Shunt susceptance 1 (μS)",
-  shuntConductance2: "Shunt conductance 2 (μS)",
-  shuntSusceptance2: "Shunt susceptance 2 (μS)",
+  seriesResistance: "Series resistance",
+  seriesResistance1: "Series resistance 1",
+  seriesResistance2: "Series resistance 2",
+  seriesResistance3: "Series resistance 3",
+  seriesReactance: "Series reactance",
+  seriesReactance1: "Series reactance 1",
+  seriesReactance2: "Series reactance 2",
+  seriesReactance3: "Series reactance 3",
+  shuntConductance: "Shunt conductance",
+  shuntSusceptance: "Shunt susceptance",
+  shuntConductance1: "Shunt conductance 1",
+  shuntSusceptance1: "Shunt susceptance 1",
+  shuntConductance2: "Shunt conductance 2",
+  shuntSusceptance2: "Shunt susceptance 2",
   pairingKey: "Xnode",
   tieLineId: "Tie line ID",
   cannotRetrieveFilter: "Could not retrieve filter: ",
@@ -179,8 +179,8 @@ const filterExpertEn = {
   YupNotTypeNumber: "This field only accepts numeric values",
   YupNotTypeDefault: "Field value format is incorrect",
   changeOperatorMessage: "The operator will be changed and will be applied to all the rules already created in the group.",
-  lowShortCircuitCurrentLimit: "Low short-circuit current limit (kA)",
-  highShortCircuitCurrentLimit: "High short-circuit current limit (kA)"
+  lowShortCircuitCurrentLimit: "Low short-circuit current limit",
+  highShortCircuitCurrentLimit: "High short-circuit current limit"
 };
 export {
   filterExpertEn

package/dist/translations/fr/filterExpertFr.js

@@ -4,51 +4,51 @@ const filterExpertFr = {
   energySource: "Source d'énergie",
   country: "Pays",
   voltageRegulatorOn: "Réglage de tension",
-  PlannedActivePowerSetPoint: "Puissance imposée (MW)",
-  minP: "Puissance active min (MW)",
-  maxP: "Puissance active max (MW)",
-  targetP: "Consigne puissance active (MW)",
-  targetV: "Consigne tension (kV)",
-  targetQ: "Consigne puissance réactive (MVar)",
+  PlannedActivePowerSetPoint: "Puissance imposée",
+  minP: "Puissance active min",
+  maxP: "Puissance active max",
+  targetP: "Consigne puissance active",
+  targetV: "Consigne tension",
+  targetQ: "Consigne puissance réactive",
   connected: "Connecté",
   maximumSectionCount: "Nombre de gradins",
   sectionCount: "Gradin courant",
   shuntCompensatorType: "Type",
   Capacitor: "Condensateur",
   Reactor: "Réactance",
-  maxQAtNominalV: "Q installée à tension nominale (MVar)",
-  SwitchedOnMaxQAtNominalV: "Q enclenchée à tension nominale (MVar)",
-  maxSusceptance: "Susceptance installée (S)",
-  SwitchedOnMaxSusceptance: "Susceptance enclenchée (S)",
-  ratedS: "Puissance nominale (MVA)",
-  ratedS1: "Puissance nominale côté 1 (MVA)",
-  ratedS2: "Puissance nominale côté 2 (MVA)",
-  ratedS3: "Puissance nominale côté 3 (MVA)",
+  maxQAtNominalV: "Q installée à tension nominale",
+  SwitchedOnMaxQAtNominalV: "Q enclenchée à tension nominale",
+  maxSusceptance: "Susceptance installée",
+  SwitchedOnMaxSusceptance: "Susceptance enclenchée",
+  ratedS: "Puissance nominale",
+  ratedS1: "Puissance nominale côté 1",
+  ratedS2: "Puissance nominale côté 2",
+  ratedS3: "Puissance nominale côté 3",
   marginalCost: "Coût",
   plannedOutageRate: "Indisponibilité programmée",
   forcedOutageRate: "Indisponibilité fortuite",
   vlId: "ID de poste",
-  p0: "P constant (MW)",
-  q0: "Q constant (MVar)",
+  p0: "P constant",
+  q0: "Q constant",
   loadTapChangingCapabilities: "Régleur en charge",
   loadTapChangingCapabilities1: "Régleur 1 en charge",
   loadTapChangingCapabilities2: "Régleur 2 en charge",
   loadTapChangingCapabilities3: "Régleur 3 en charge",
-  ratioTargetV: "Tension de consigne du régleur (kV)",
-  ratioTargetV1: "Tension de consigne du régleur 1 (kV)",
-  ratioTargetV2: "Tension de consigne du régleur 2 (kV)",
-  ratioTargetV3: "Tension de consigne du régleur 3 (kV)",
-  magnetizingConductance: "Conductance magnétisante (μS)",
-  magnetizingConductance1: "Conductance magnétisante côté 1 (μS)",
-  magnetizingConductance2: "Conductance magnétisante côté 2 (μS)",
-  magnetizingConductance3: "Conductance magnétisante côté 3 (μS)",
-  magnetizingSusceptance: "Susceptance magnétisante (μS)",
-  magnetizingSusceptance1: "Susceptance magnétisante côté 1 (μS)",
-  magnetizingSusceptance2: "Susceptance magnétisante côté 2 (μS)",
-  magnetizingSusceptance3: "Susceptance magnétisante côté 3 (μS)",
-  vlNominalVoltage: "Tension nominale poste (kV)",
-  lowVoltageLimit: "Limite tension basse (kV)",
-  highVoltageLimit: "Limite tension haute (kV)",
+  ratioTargetV: "Tension de consigne du régleur",
+  ratioTargetV1: "Tension de consigne du régleur 1",
+  ratioTargetV2: "Tension de consigne du régleur 2",
+  ratioTargetV3: "Tension de consigne du régleur 3",
+  magnetizingConductance: "Conductance magnétisante",
+  magnetizingConductance1: "Conductance magnétisante côté 1",
+  magnetizingConductance2: "Conductance magnétisante côté 2",
+  magnetizingConductance3: "Conductance magnétisante côté 3",
+  magnetizingSusceptance: "Susceptance magnétisante",
+  magnetizingSusceptance1: "Susceptance magnétisante côté 1",
+  magnetizingSusceptance2: "Susceptance magnétisante côté 2",
+  magnetizingSusceptance3: "Susceptance magnétisante côté 3",
+  vlNominalVoltage: "Tension nominale poste",
+  lowVoltageLimit: "Limite tension basse",
+  highVoltageLimit: "Limite tension haute",
   selectFilterDialogTitle: "Choisir un filtre",
   filter: "Filtre",
   loadType: "Type",
@@ -88,12 +88,12 @@ const filterExpertFr = {
   substationProperty2: "Propriété site 2",
   substationProperty1Twt: "Propriété site 1",
   substationProperty2Twt: "Propriété site 2",
-  ratedVoltage1KV: "Tension d'enroulement 1 (kV)",
-  ratedVoltage2KV: "Tension d'enroulement 2 (kV)",
-  ratedVoltage0KVTwt: "Tension d'enroulement 0 (kV)",
-  ratedVoltage1KVTwt: "Tension d'enroulement 1 (kV)",
-  ratedVoltage2KVTwt: "Tension d'enroulement 2 (kV)",
-  ratedVoltage3KVTwt: "Tension d'enroulement 3 (kV)",
+  ratedVoltage1KV: "Tension d'enroulement 1",
+  ratedVoltage2KV: "Tension d'enroulement 2",
+  ratedVoltage0KVTwt: "Tension d'enroulement 0",
+  ratedVoltage1KVTwt: "Tension d'enroulement 1",
+  ratedVoltage2KVTwt: "Tension d'enroulement 2",
+  ratedVoltage3KVTwt: "Tension d'enroulement 3",
   nominalVoltage1: "Tension nominale 1",
   nominalVoltage2: "Tension nominale 2",
   nominalVoltage3: "Tension nominale 3",
@@ -107,29 +107,29 @@ const filterExpertFr = {
   terminal1ConnectedTwt: "Connecté 1",
   terminal2ConnectedTwt: "Connecté 2",
   terminal3ConnectedTwt: "Connecté 3",
-  nominalVoltage1KV: "Tension nominale 1 (kV)",
-  nominalVoltage2KV: "Tension nominale 2 (kV)",
-  nominalVoltage1KVTwt: "Tension nominale 1 (kV)",
-  nominalVoltage2KVTwt: "Tension nominale 2 (kV)",
-  nominalVoltage3KVTwt: "Tension nominale 3 (kV)",
+  nominalVoltage1KV: "Tension nominale 1",
+  nominalVoltage2KV: "Tension nominale 2",
+  nominalVoltage1KVTwt: "Tension nominale 1",
+  nominalVoltage2KVTwt: "Tension nominale 2",
+  nominalVoltage3KVTwt: "Tension nominale 3",
   voltageLevelProperty: "Propriété poste",
   voltageLevelProperty1: "Propriété poste 1",
   voltageLevelProperty2: "Propriété poste 2",
   voltageLevelProperty1Twt: "Propriété poste 1",
   voltageLevelProperty2Twt: "Propriété poste 2",
   voltageLevelProperty3Twt: "Propriété poste 3",
-  "maxQAtNominalV.svar": "Q max à tension nominale (MVar)",
-  "minQAtNominalV.svar": "Q min à tension nominale (MVar)",
-  "fixQAtNominalV.svar": "Q fixe à tension nominale (MVar)",
-  "maxSusceptance.svar": "Susceptance max (S)",
-  "minSusceptance.svar": "Susceptance min (S)",
+  "maxQAtNominalV.svar": "Q max à tension nominale",
+  "minQAtNominalV.svar": "Q min à tension nominale",
+  "fixQAtNominalV.svar": "Q fixe à tension nominale",
+  "maxSusceptance.svar": "Susceptance max",
+  "minSusceptance.svar": "Susceptance min",
   regulationMode: "Mode de réglage",
   "regulationMode.off": "Arrêt",
   "regulationMode.voltage": "Réglage de tension",
   "regulationMode.reactivePower": "Réglage du réactif",
   voltageSetPoint: "Tension",
-  activePowerSetPoint: "Consigne de puissance active (MW)",
-  reactivePowerSetPoint: "Consigne de puissance réactive (MVar)",
+  activePowerSetPoint: "Consigne de puissance active",
+  reactivePowerSetPoint: "Consigne de puissance réactive",
   remoteRegulatedTerminal: "Terminal distant réglé",
   regulatingTerminalVLId: "ID de poste",
   regulatingTerminalConnectableId: "ID d'ouvrage",
@@ -148,25 +148,25 @@ const filterExpertFr = {
   convertersMode: "Mode de conversion",
   side1RectifierSide2Inverter: "Flux (1->2)",
   side1InverterSide2Rectifier: "Flux (2->1)",
-  dcNominalVoltage: "Tension nominale DC (kV)",
-  converterStationNominalVoltage1: "Tension nominale de la station de conversion 1 (kV)",
-  converterStationNominalVoltage2: "Tension nominale de la station de conversion 2 (kV)",
+  dcNominalVoltage: "Tension nominale DC",
+  converterStationNominalVoltage1: "Tension nominale de la station de conversion 1",
+  converterStationNominalVoltage2: "Tension nominale de la station de conversion 2",
   country1: "Pays 1",
   country2: "Pays 2",
-  seriesResistance: "Résistance série (Ω)",
-  seriesResistance1: "Résistance série 1 (Ω)",
-  seriesResistance2: "Résistance série 2 (Ω)",
-  seriesResistance3: "Résistance série 3 (Ω)",
-  seriesReactance: "Réactance série (Ω)",
-  seriesReactance1: "Réactance série 1 (Ω)",
-  seriesReactance2: "Réactance série 2 (Ω)",
-  seriesReactance3: "Réactance série 3 (Ω)",
-  shuntConductance: "Conductance parallèle (μS)",
-  shuntSusceptance: "Susceptance parallèle (μS)",
-  shuntConductance1: "Conductance parallèle 1 (μS)",
-  shuntSusceptance1: "Susceptance parallèle 1 (μS)",
-  shuntConductance2: "Conductance parallèle 2 (μS)",
-  shuntSusceptance2: "Susceptance parallèle 2 (μS)",
+  seriesResistance: "Résistance série",
+  seriesResistance1: "Résistance série 1",
+  seriesResistance2: "Résistance série 2",
+  seriesResistance3: "Résistance série 3",
+  seriesReactance: "Réactance série",
+  seriesReactance1: "Réactance série 1",
+  seriesReactance2: "Réactance série 2",
+  seriesReactance3: "Réactance série 3",
+  shuntConductance: "Conductance parallèle",
+  shuntSusceptance: "Susceptance parallèle",
+  shuntConductance1: "Conductance parallèle 1",
+  shuntSusceptance1: "Susceptance parallèle 1",
+  shuntConductance2: "Conductance parallèle 2",
+  shuntSusceptance2: "Susceptance parallèle 2",
   pairingKey: "Xnode",
   tieLineId: "ID de l'interconnexion",
   cannotRetrieveFilter: "Erreur d'accès au filtre : ",
@@ -179,8 +179,8 @@ const filterExpertFr = {
   YupNotTypeNumber: "Ce champ n'accepte que des valeurs numériques",
   YupNotTypeDefault: "La valeur du champ n'est pas au bon format",
   changeOperatorMessage: "L'opérateur sera modifié et s'appliquera sur toutes les règles déjà créées dans le groupe.",
-  lowShortCircuitCurrentLimit: "Limite ICC min (kA)",
-  highShortCircuitCurrentLimit: "Limite ICC max (kA)"
+  lowShortCircuitCurrentLimit: "Limite ICC min",
+  highShortCircuitCurrentLimit: "Limite ICC max"
 };
 export {
   filterExpertFr

package/dist/utils/constants/index.d.ts

@@ -8,3 +8,4 @@ export * from './browserConstants';
 export * from './fetchStatus';
 export * from './fieldConstants';
 export * from './uiConstants';
+export * from './unitsConstants';

package/dist/utils/constants/index.js

@@ -2,13 +2,26 @@ import { DARK_THEME, LANG_ENGLISH, LANG_FRENCH, LANG_SYSTEM, LIGHT_THEME } from
 import { FetchStatus } from "./fetchStatus.js";
 import { FieldConstants } from "./fieldConstants.js";
 import { MAX_CHAR_DESCRIPTION } from "./uiConstants.js";
+import { AMPERE, DEGREE, KILO_AMPERE, KILO_METER, KILO_VOLT, MEGA_VAR, MEGA_VOLT_AMPERE, MEGA_WATT, MICRO_SIEMENS, OHM, PERCENTAGE, SIEMENS } from "./unitsConstants.js";
 export {
+  AMPERE,
   DARK_THEME,
+  DEGREE,
   FetchStatus,
   FieldConstants,
+  KILO_AMPERE,
+  KILO_METER,
+  KILO_VOLT,
   LANG_ENGLISH,
   LANG_FRENCH,
   LANG_SYSTEM,
   LIGHT_THEME,
-  MAX_CHAR_DESCRIPTION
+  MAX_CHAR_DESCRIPTION,
+  MEGA_VAR,
+  MEGA_VOLT_AMPERE,
+  MEGA_WATT,
+  MICRO_SIEMENS,
+  OHM,
+  PERCENTAGE,
+  SIEMENS
 };

package/dist/utils/constants/unitsConstants.d.ts

@@ -0,0 +1,18 @@
+/**
+ * Copyright (c) 2025, RTE (http://www.rte-france.com)
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+export declare const MICRO_SIEMENS = "\u00B5S";
+export declare const SIEMENS = "S";
+export declare const AMPERE = "A";
+export declare const KILO_AMPERE = "kA";
+export declare const MEGA_VAR = "MVar";
+export declare const MEGA_VOLT_AMPERE = "MVA";
+export declare const OHM = "\u03A9";
+export declare const MEGA_WATT = "MW";
+export declare const KILO_VOLT = "kV";
+export declare const KILO_METER = "km";
+export declare const PERCENTAGE = "%";
+export declare const DEGREE = "\u00B0";

package/dist/utils/constants/unitsConstants.js

@@ -0,0 +1,26 @@
+const MICRO_SIEMENS = "µS";
+const SIEMENS = "S";
+const AMPERE = "A";
+const KILO_AMPERE = "kA";
+const MEGA_VAR = "MVar";
+const MEGA_VOLT_AMPERE = "MVA";
+const OHM = "Ω";
+const MEGA_WATT = "MW";
+const KILO_VOLT = "kV";
+const KILO_METER = "km";
+const PERCENTAGE = "%";
+const DEGREE = "°";
+export {
+  AMPERE,
+  DEGREE,
+  KILO_AMPERE,
+  KILO_METER,
+  KILO_VOLT,
+  MEGA_VAR,
+  MEGA_VOLT_AMPERE,
+  MEGA_WATT,
+  MICRO_SIEMENS,
+  OHM,
+  PERCENTAGE,
+  SIEMENS
+};

package/dist/utils/index.js

@@ -3,6 +3,7 @@ import { DARK_THEME, LANG_ENGLISH, LANG_FRENCH, LANG_SYSTEM, LIGHT_THEME } from
 import { FetchStatus } from "./constants/fetchStatus.js";
 import { FieldConstants } from "./constants/fieldConstants.js";
 import { MAX_CHAR_DESCRIPTION } from "./constants/uiConstants.js";
+import { AMPERE, DEGREE, KILO_AMPERE, KILO_METER, KILO_VOLT, MEGA_VAR, MEGA_VOLT_AMPERE, MEGA_WATT, MICRO_SIEMENS, OHM, PERCENTAGE, SIEMENS } from "./constants/unitsConstants.js";
 import { GRIDSUITE_DEFAULT_PRECISION, convertInputValue, convertOutputValue, isBlankOrEmpty, kiloUnitToUnit, microUnitToUnit, roundToDefaultPrecision, roundToPrecision, unitToKiloUnit, unitToMicroUnit } from "./conversionUtils.js";
 import { areArrayElementsUnique, isObjectEmpty, keyGenerator } from "./functions.js";
 import { getFileIcon } from "./mapper/getFileIcon.js";
@@ -16,9 +17,11 @@ import { FieldType } from "./types/fieldType.js";
 import "./yupConfig.js";
 import * as yup from "yup";
 export {
+  AMPERE,
   Battery,
   BusBar,
   DARK_THEME,
+  DEGREE,
   DanglingLine,
   EQUIPMENT_TYPE,
   ElementType,
@@ -29,6 +32,9 @@ export {
   GRIDSUITE_DEFAULT_PRECISION,
   Generator,
   Hvdc,
+  KILO_AMPERE,
+  KILO_METER,
+  KILO_VOLT,
   LANG_ENGLISH,
   LANG_FRENCH,
   LANG_SYSTEM,
@@ -37,9 +43,16 @@ export {
   Line,
   Load,
   MAX_CHAR_DESCRIPTION,
+  MEGA_VAR,
+  MEGA_VOLT_AMPERE,
+  MEGA_WATT,
+  MICRO_SIEMENS,
   MODIFICATION_TYPES,
   ModificationType,
+  OHM,
   OperatingStatus,
+  PERCENTAGE,
+  SIEMENS,
   SVC,
   ShuntCompensator,
   Substation,

package/package.json

@@ -1,6 +1,6 @@
 {
     "name": "@gridsuite/commons-ui",
-    "version": "0.77.1",
+    "version": "0.77.2",
     "description": "common react components for gridsuite applications",
     "engines": {
         "npm": ">=9",