@gridsuite/commons-ui 0.76.0 → 0.77.0

package/dist/utils/types/fieldType.d.ts

@@ -0,0 +1,169 @@
+/**
+ * Copyright (c) 2024, RTE (http://www.rte-france.com)
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ */
+export declare enum FieldType {
+    ID = "ID",
+    NAME = "NAME",
+    PROPERTY = "PROPERTY",
+    NOMINAL_VOLTAGE = "NOMINAL_VOLTAGE",
+    MIN_P = "MIN_P",
+    MAX_P = "MAX_P",
+    TARGET_V = "TARGET_V",
+    TARGET_P = "TARGET_P",
+    TARGET_Q = "TARGET_Q",
+    ENERGY_SOURCE = "ENERGY_SOURCE",
+    COUNTRY = "COUNTRY",
+    VOLTAGE_REGULATOR_ON = "VOLTAGE_REGULATOR_ON",
+    PLANNED_ACTIVE_POWER_SET_POINT = "PLANNED_ACTIVE_POWER_SET_POINT",
+    RATED_S = "RATED_S",
+    RATED_S1 = "RATED_S1",
+    RATED_S2 = "RATED_S2",
+    RATED_S3 = "RATED_S3",
+    MARGINAL_COST = "MARGINAL_COST",
+    PLANNED_OUTAGE_RATE = "PLANNED_OUTAGE_RATE",
+    FORCED_OUTAGE_RATE = "FORCED_OUTAGE_RATE",
+    VOLTAGE_LEVEL_ID = "VOLTAGE_LEVEL_ID",
+    P0 = "P0",
+    Q0 = "Q0",
+    LOW_VOLTAGE_LIMIT = "LOW_VOLTAGE_LIMIT",
+    HIGH_VOLTAGE_LIMIT = "HIGH_VOLTAGE_LIMIT",
+    SECTION_COUNT = "SECTION_COUNT",
+    MAXIMUM_SECTION_COUNT = "MAXIMUM_SECTION_COUNT",
+    SHUNT_COMPENSATOR_TYPE = "SHUNT_COMPENSATOR_TYPE",
+    CONNECTED = "CONNECTED",
+    MAX_Q_AT_NOMINAL_V = "MAX_Q_AT_NOMINAL_V",
+    MIN_Q_AT_NOMINAL_V = "MIN_Q_AT_NOMINAL_V",
+    FIX_Q_AT_NOMINAL_V = "FIX_Q_AT_NOMINAL_V",
+    SWITCHED_ON_Q_AT_NOMINAL_V = "SWITCHED_ON_Q_AT_NOMINAL_V",
+    MAX_SUSCEPTANCE = "MAX_SUSCEPTANCE",
+    MIN_SUSCEPTANCE = "MIN_SUSCEPTANCE",
+    SWITCHED_ON_SUSCEPTANCE = "SWITCHED_ON_SUSCEPTANCE",
+    CONNECTED_1 = "CONNECTED_1",
+    CONNECTED_2 = "CONNECTED_2",
+    CONNECTED_3 = "CONNECTED_3",
+    VOLTAGE_LEVEL_ID_1 = "VOLTAGE_LEVEL_ID_1",
+    VOLTAGE_LEVEL_ID_2 = "VOLTAGE_LEVEL_ID_2",
+    VOLTAGE_LEVEL_ID_3 = "VOLTAGE_LEVEL_ID_3",
+    NOMINAL_VOLTAGE_1 = "NOMINAL_VOLTAGE_1",
+    NOMINAL_VOLTAGE_2 = "NOMINAL_VOLTAGE_2",
+    NOMINAL_VOLTAGE_3 = "NOMINAL_VOLTAGE_3",
+    COUNTRY_1 = "COUNTRY_1",
+    COUNTRY_2 = "COUNTRY_2",
+    SERIE_RESISTANCE = "SERIE_RESISTANCE",
+    SERIE_RESISTANCE_1 = "SERIE_RESISTANCE_1",
+    SERIE_RESISTANCE_2 = "SERIE_RESISTANCE_2",
+    SERIE_RESISTANCE_3 = "SERIE_RESISTANCE_3",
+    SERIE_REACTANCE = "SERIE_REACTANCE",
+    SERIE_REACTANCE_1 = "SERIE_REACTANCE_1",
+    SERIE_REACTANCE_2 = "SERIE_REACTANCE_2",
+    SERIE_REACTANCE_3 = "SERIE_REACTANCE_3",
+    SHUNT_CONDUCTANCE = "SHUNT_CONDUCTANCE",
+    SHUNT_CONDUCTANCE_1 = "SHUNT_CONDUCTANCE_1",
+    SHUNT_CONDUCTANCE_2 = "SHUNT_CONDUCTANCE_2",
+    SHUNT_SUSCEPTANCE = "SHUNT_SUSCEPTANCE",
+    SHUNT_SUSCEPTANCE_1 = "SHUNT_SUSCEPTANCE_1",
+    SHUNT_SUSCEPTANCE_2 = "SHUNT_SUSCEPTANCE_2",
+    MAGNETIZING_CONDUCTANCE = "MAGNETIZING_CONDUCTANCE",
+    MAGNETIZING_CONDUCTANCE_1 = "MAGNETIZING_CONDUCTANCE_1",
+    MAGNETIZING_CONDUCTANCE_2 = "MAGNETIZING_CONDUCTANCE_2",
+    MAGNETIZING_CONDUCTANCE_3 = "MAGNETIZING_CONDUCTANCE_3",
+    MAGNETIZING_SUSCEPTANCE = "MAGNETIZING_SUSCEPTANCE",
+    MAGNETIZING_SUSCEPTANCE_1 = "MAGNETIZING_SUSCEPTANCE_1",
+    MAGNETIZING_SUSCEPTANCE_2 = "MAGNETIZING_SUSCEPTANCE_2",
+    MAGNETIZING_SUSCEPTANCE_3 = "MAGNETIZING_SUSCEPTANCE_3",
+    LOAD_TYPE = "LOAD_TYPE",
+    RATED_VOLTAGE_0 = "RATED_VOLTAGE_0",
+    RATED_VOLTAGE_1 = "RATED_VOLTAGE_1",
+    RATED_VOLTAGE_2 = "RATED_VOLTAGE_2",
+    RATED_VOLTAGE_3 = "RATED_VOLTAGE_3",
+    HAS_RATIO_TAP_CHANGER = "HAS_RATIO_TAP_CHANGER",
+    HAS_RATIO_TAP_CHANGER_1 = "HAS_RATIO_TAP_CHANGER_1",
+    HAS_RATIO_TAP_CHANGER_2 = "HAS_RATIO_TAP_CHANGER_2",
+    HAS_RATIO_TAP_CHANGER_3 = "HAS_RATIO_TAP_CHANGER_3",
+    LOAD_TAP_CHANGING_CAPABILITIES = "LOAD_TAP_CHANGING_CAPABILITIES",
+    LOAD_TAP_CHANGING_CAPABILITIES_1 = "LOAD_TAP_CHANGING_CAPABILITIES_1",
+    LOAD_TAP_CHANGING_CAPABILITIES_2 = "LOAD_TAP_CHANGING_CAPABILITIES_2",
+    LOAD_TAP_CHANGING_CAPABILITIES_3 = "LOAD_TAP_CHANGING_CAPABILITIES_3",
+    RATIO_REGULATION_MODE = "RATIO_REGULATION_MODE",
+    RATIO_REGULATION_MODE_1 = "RATIO_REGULATION_MODE_1",
+    RATIO_REGULATION_MODE_2 = "RATIO_REGULATION_MODE_2",
+    RATIO_REGULATION_MODE_3 = "RATIO_REGULATION_MODE_3",
+    RATIO_TARGET_V = "RATIO_TARGET_V",
+    RATIO_TARGET_V1 = "RATIO_TARGET_V1",
+    RATIO_TARGET_V2 = "RATIO_TARGET_V2",
+    RATIO_TARGET_V3 = "RATIO_TARGET_V3",
+    HAS_PHASE_TAP_CHANGER = "HAS_PHASE_TAP_CHANGER",
+    HAS_PHASE_TAP_CHANGER_1 = "HAS_PHASE_TAP_CHANGER_1",
+    HAS_PHASE_TAP_CHANGER_2 = "HAS_PHASE_TAP_CHANGER_2",
+    HAS_PHASE_TAP_CHANGER_3 = "HAS_PHASE_TAP_CHANGER_3",
+    PHASE_REGULATION_MODE = "PHASE_REGULATION_MODE",
+    PHASE_REGULATION_MODE_1 = "PHASE_REGULATION_MODE_1",
+    PHASE_REGULATION_MODE_2 = "PHASE_REGULATION_MODE_2",
+    PHASE_REGULATION_MODE_3 = "PHASE_REGULATION_MODE_3",
+    PHASE_REGULATION_VALUE = "PHASE_REGULATION_VALUE",
+    PHASE_REGULATION_VALUE_1 = "PHASE_REGULATION_VALUE_1",
+    PHASE_REGULATION_VALUE_2 = "PHASE_REGULATION_VALUE_2",
+    PHASE_REGULATION_VALUE_3 = "PHASE_REGULATION_VALUE_3",
+    FREE_PROPERTIES = "FREE_PROPERTIES",
+    SUBSTATION_PROPERTY = "SUBSTATION_PROPERTY",
+    SUBSTATION_PROPERTY_1 = "SUBSTATION_PROPERTY_1",
+    SUBSTATION_PROPERTY_2 = "SUBSTATION_PROPERTY_2",
+    VOLTAGE_LEVEL_PROPERTY = "VOLTAGE_LEVEL_PROPERTY",
+    VOLTAGE_LEVEL_PROPERTY_1 = "VOLTAGE_LEVEL_PROPERTY_1",
+    VOLTAGE_LEVEL_PROPERTY_2 = "VOLTAGE_LEVEL_PROPERTY_2",
+    VOLTAGE_LEVEL_PROPERTY_3 = "VOLTAGE_LEVEL_PROPERTY_3",
+    SVAR_REGULATION_MODE = "SVAR_REGULATION_MODE",
+    VOLTAGE_SET_POINT = "VOLTAGE_SET_POINT",
+    ACTIVE_POWER_SET_POINT = "ACTIVE_POWER_SET_POINT",
+    REACTIVE_POWER_SET_POINT = "REACTIVE_POWER_SET_POINT",
+    REMOTE_REGULATED_TERMINAL = "REMOTE_REGULATED_TERMINAL",
+    REGULATING_TERMINAL_VL_ID = "REGULATING_TERMINAL_VL_ID",
+    REGULATING_TERMINAL_CONNECTABLE_ID = "REGULATING_TERMINAL_CONNECTABLE_ID",
+    REGULATION_TYPE = "REGULATION_TYPE",
+    AUTOMATE = "AUTOMATE",
+    LOW_VOLTAGE_SET_POINT = "LOW_VOLTAGE_SET_POINT",
+    HIGH_VOLTAGE_SET_POINT = "HIGH_VOLTAGE_SET_POINT",
+    LOW_VOLTAGE_THRESHOLD = "LOW_VOLTAGE_THRESHOLD",
+    HIGH_VOLTAGE_THRESHOLD = "HIGH_VOLTAGE_THRESHOLD",
+    SUSCEPTANCE_FIX = "SUSCEPTANCE_FIX",
+    PAIRED = "PAIRED",
+    CONVERTERS_MODE = "CONVERTERS_MODE",
+    CONVERTER_STATION_ID_1 = "CONVERTER_STATION_ID_1",
+    CONVERTER_STATION_ID_2 = "CONVERTER_STATION_ID_2",
+    CONVERTER_STATION_NOMINAL_VOLTAGE_1 = "CONVERTER_STATION_NOMINAL_VOLTAGE_1",
+    CONVERTER_STATION_NOMINAL_VOLTAGE_2 = "CONVERTER_STATION_NOMINAL_VOLTAGE_2",
+    DC_NOMINAL_VOLTAGE = "DC_NOMINAL_VOLTAGE",
+    PAIRING_KEY = "PAIRING_KEY",
+    TIE_LINE_ID = "TIE_LINE_ID",
+    LOW_SHORT_CIRCUIT_CURRENT_LIMIT = "LOW_SHORT_CIRCUIT_CURRENT_LIMIT",
+    HIGH_SHORT_CIRCUIT_CURRENT_LIMIT = "HIGH_SHORT_CIRCUIT_CURRENT_LIMIT",
+    R = "R",
+    X = "X",
+    G = "G",
+    G1 = "G1",
+    G2 = "G2",
+    B = "B",
+    B1 = "B1",
+    B2 = "B2",
+    RATED_NOMINAL_POWER = "RATED_NOMINAL_POWER",
+    MINIMUM_ACTIVE_POWER = "MINIMUM_ACTIVE_POWER",
+    MAXIMUM_ACTIVE_POWER = "MAXIMUM_ACTIVE_POWER",
+    DROOP = "DROOP",
+    TRANSIENT_REACTANCE = "TRANSIENT_REACTANCE",
+    STEP_UP_TRANSFORMER_REACTANCE = "STEP_UP_TRANSFORMER_REACTANCE",
+    Q_PERCENT = "Q_PERCENT",
+    ACTIVE_POWER = "ACTIVE_POWER",
+    REACTIVE_POWER = "REACTIVE_POWER",
+    RATED_U1 = "RATED_U1",
+    RATED_U2 = "RATED_U2",
+    RATIO_LOW_TAP_POSITION = "RATIO_LOW_TAP_POSITION",
+    RATIO_TAP_POSITION = "RATIO_TAP_POSITION",
+    RATIO_TARGET_DEADBAND = "RATIO_TARGET_DEADBAND",
+    REGULATION_VALUE = "REGULATION_VALUE",
+    PHASE_LOW_TAP_POSITION = "PHASE_LOW_TAP_POSITION",
+    PHASE_TAP_POSITION = "PHASE_TAP_POSITION",
+    PHASE_TARGET_DEADBAND = "PHASE_TARGET_DEADBAND"
+}

package/dist/utils/types/fieldType.js

@@ -0,0 +1,167 @@
+var FieldType = /* @__PURE__ */ ((FieldType2) => {
+  FieldType2["ID"] = "ID";
+  FieldType2["NAME"] = "NAME";
+  FieldType2["PROPERTY"] = "PROPERTY";
+  FieldType2["NOMINAL_VOLTAGE"] = "NOMINAL_VOLTAGE";
+  FieldType2["MIN_P"] = "MIN_P";
+  FieldType2["MAX_P"] = "MAX_P";
+  FieldType2["TARGET_V"] = "TARGET_V";
+  FieldType2["TARGET_P"] = "TARGET_P";
+  FieldType2["TARGET_Q"] = "TARGET_Q";
+  FieldType2["ENERGY_SOURCE"] = "ENERGY_SOURCE";
+  FieldType2["COUNTRY"] = "COUNTRY";
+  FieldType2["VOLTAGE_REGULATOR_ON"] = "VOLTAGE_REGULATOR_ON";
+  FieldType2["PLANNED_ACTIVE_POWER_SET_POINT"] = "PLANNED_ACTIVE_POWER_SET_POINT";
+  FieldType2["RATED_S"] = "RATED_S";
+  FieldType2["RATED_S1"] = "RATED_S1";
+  FieldType2["RATED_S2"] = "RATED_S2";
+  FieldType2["RATED_S3"] = "RATED_S3";
+  FieldType2["MARGINAL_COST"] = "MARGINAL_COST";
+  FieldType2["PLANNED_OUTAGE_RATE"] = "PLANNED_OUTAGE_RATE";
+  FieldType2["FORCED_OUTAGE_RATE"] = "FORCED_OUTAGE_RATE";
+  FieldType2["VOLTAGE_LEVEL_ID"] = "VOLTAGE_LEVEL_ID";
+  FieldType2["P0"] = "P0";
+  FieldType2["Q0"] = "Q0";
+  FieldType2["LOW_VOLTAGE_LIMIT"] = "LOW_VOLTAGE_LIMIT";
+  FieldType2["HIGH_VOLTAGE_LIMIT"] = "HIGH_VOLTAGE_LIMIT";
+  FieldType2["SECTION_COUNT"] = "SECTION_COUNT";
+  FieldType2["MAXIMUM_SECTION_COUNT"] = "MAXIMUM_SECTION_COUNT";
+  FieldType2["SHUNT_COMPENSATOR_TYPE"] = "SHUNT_COMPENSATOR_TYPE";
+  FieldType2["CONNECTED"] = "CONNECTED";
+  FieldType2["MAX_Q_AT_NOMINAL_V"] = "MAX_Q_AT_NOMINAL_V";
+  FieldType2["MIN_Q_AT_NOMINAL_V"] = "MIN_Q_AT_NOMINAL_V";
+  FieldType2["FIX_Q_AT_NOMINAL_V"] = "FIX_Q_AT_NOMINAL_V";
+  FieldType2["SWITCHED_ON_Q_AT_NOMINAL_V"] = "SWITCHED_ON_Q_AT_NOMINAL_V";
+  FieldType2["MAX_SUSCEPTANCE"] = "MAX_SUSCEPTANCE";
+  FieldType2["MIN_SUSCEPTANCE"] = "MIN_SUSCEPTANCE";
+  FieldType2["SWITCHED_ON_SUSCEPTANCE"] = "SWITCHED_ON_SUSCEPTANCE";
+  FieldType2["CONNECTED_1"] = "CONNECTED_1";
+  FieldType2["CONNECTED_2"] = "CONNECTED_2";
+  FieldType2["CONNECTED_3"] = "CONNECTED_3";
+  FieldType2["VOLTAGE_LEVEL_ID_1"] = "VOLTAGE_LEVEL_ID_1";
+  FieldType2["VOLTAGE_LEVEL_ID_2"] = "VOLTAGE_LEVEL_ID_2";
+  FieldType2["VOLTAGE_LEVEL_ID_3"] = "VOLTAGE_LEVEL_ID_3";
+  FieldType2["NOMINAL_VOLTAGE_1"] = "NOMINAL_VOLTAGE_1";
+  FieldType2["NOMINAL_VOLTAGE_2"] = "NOMINAL_VOLTAGE_2";
+  FieldType2["NOMINAL_VOLTAGE_3"] = "NOMINAL_VOLTAGE_3";
+  FieldType2["COUNTRY_1"] = "COUNTRY_1";
+  FieldType2["COUNTRY_2"] = "COUNTRY_2";
+  FieldType2["SERIE_RESISTANCE"] = "SERIE_RESISTANCE";
+  FieldType2["SERIE_RESISTANCE_1"] = "SERIE_RESISTANCE_1";
+  FieldType2["SERIE_RESISTANCE_2"] = "SERIE_RESISTANCE_2";
+  FieldType2["SERIE_RESISTANCE_3"] = "SERIE_RESISTANCE_3";
+  FieldType2["SERIE_REACTANCE"] = "SERIE_REACTANCE";
+  FieldType2["SERIE_REACTANCE_1"] = "SERIE_REACTANCE_1";
+  FieldType2["SERIE_REACTANCE_2"] = "SERIE_REACTANCE_2";
+  FieldType2["SERIE_REACTANCE_3"] = "SERIE_REACTANCE_3";
+  FieldType2["SHUNT_CONDUCTANCE"] = "SHUNT_CONDUCTANCE";
+  FieldType2["SHUNT_CONDUCTANCE_1"] = "SHUNT_CONDUCTANCE_1";
+  FieldType2["SHUNT_CONDUCTANCE_2"] = "SHUNT_CONDUCTANCE_2";
+  FieldType2["SHUNT_SUSCEPTANCE"] = "SHUNT_SUSCEPTANCE";
+  FieldType2["SHUNT_SUSCEPTANCE_1"] = "SHUNT_SUSCEPTANCE_1";
+  FieldType2["SHUNT_SUSCEPTANCE_2"] = "SHUNT_SUSCEPTANCE_2";
+  FieldType2["MAGNETIZING_CONDUCTANCE"] = "MAGNETIZING_CONDUCTANCE";
+  FieldType2["MAGNETIZING_CONDUCTANCE_1"] = "MAGNETIZING_CONDUCTANCE_1";
+  FieldType2["MAGNETIZING_CONDUCTANCE_2"] = "MAGNETIZING_CONDUCTANCE_2";
+  FieldType2["MAGNETIZING_CONDUCTANCE_3"] = "MAGNETIZING_CONDUCTANCE_3";
+  FieldType2["MAGNETIZING_SUSCEPTANCE"] = "MAGNETIZING_SUSCEPTANCE";
+  FieldType2["MAGNETIZING_SUSCEPTANCE_1"] = "MAGNETIZING_SUSCEPTANCE_1";
+  FieldType2["MAGNETIZING_SUSCEPTANCE_2"] = "MAGNETIZING_SUSCEPTANCE_2";
+  FieldType2["MAGNETIZING_SUSCEPTANCE_3"] = "MAGNETIZING_SUSCEPTANCE_3";
+  FieldType2["LOAD_TYPE"] = "LOAD_TYPE";
+  FieldType2["RATED_VOLTAGE_0"] = "RATED_VOLTAGE_0";
+  FieldType2["RATED_VOLTAGE_1"] = "RATED_VOLTAGE_1";
+  FieldType2["RATED_VOLTAGE_2"] = "RATED_VOLTAGE_2";
+  FieldType2["RATED_VOLTAGE_3"] = "RATED_VOLTAGE_3";
+  FieldType2["HAS_RATIO_TAP_CHANGER"] = "HAS_RATIO_TAP_CHANGER";
+  FieldType2["HAS_RATIO_TAP_CHANGER_1"] = "HAS_RATIO_TAP_CHANGER_1";
+  FieldType2["HAS_RATIO_TAP_CHANGER_2"] = "HAS_RATIO_TAP_CHANGER_2";
+  FieldType2["HAS_RATIO_TAP_CHANGER_3"] = "HAS_RATIO_TAP_CHANGER_3";
+  FieldType2["LOAD_TAP_CHANGING_CAPABILITIES"] = "LOAD_TAP_CHANGING_CAPABILITIES";
+  FieldType2["LOAD_TAP_CHANGING_CAPABILITIES_1"] = "LOAD_TAP_CHANGING_CAPABILITIES_1";
+  FieldType2["LOAD_TAP_CHANGING_CAPABILITIES_2"] = "LOAD_TAP_CHANGING_CAPABILITIES_2";
+  FieldType2["LOAD_TAP_CHANGING_CAPABILITIES_3"] = "LOAD_TAP_CHANGING_CAPABILITIES_3";
+  FieldType2["RATIO_REGULATION_MODE"] = "RATIO_REGULATION_MODE";
+  FieldType2["RATIO_REGULATION_MODE_1"] = "RATIO_REGULATION_MODE_1";
+  FieldType2["RATIO_REGULATION_MODE_2"] = "RATIO_REGULATION_MODE_2";
+  FieldType2["RATIO_REGULATION_MODE_3"] = "RATIO_REGULATION_MODE_3";
+  FieldType2["RATIO_TARGET_V"] = "RATIO_TARGET_V";
+  FieldType2["RATIO_TARGET_V1"] = "RATIO_TARGET_V1";
+  FieldType2["RATIO_TARGET_V2"] = "RATIO_TARGET_V2";
+  FieldType2["RATIO_TARGET_V3"] = "RATIO_TARGET_V3";
+  FieldType2["HAS_PHASE_TAP_CHANGER"] = "HAS_PHASE_TAP_CHANGER";
+  FieldType2["HAS_PHASE_TAP_CHANGER_1"] = "HAS_PHASE_TAP_CHANGER_1";
+  FieldType2["HAS_PHASE_TAP_CHANGER_2"] = "HAS_PHASE_TAP_CHANGER_2";
+  FieldType2["HAS_PHASE_TAP_CHANGER_3"] = "HAS_PHASE_TAP_CHANGER_3";
+  FieldType2["PHASE_REGULATION_MODE"] = "PHASE_REGULATION_MODE";
+  FieldType2["PHASE_REGULATION_MODE_1"] = "PHASE_REGULATION_MODE_1";
+  FieldType2["PHASE_REGULATION_MODE_2"] = "PHASE_REGULATION_MODE_2";
+  FieldType2["PHASE_REGULATION_MODE_3"] = "PHASE_REGULATION_MODE_3";
+  FieldType2["PHASE_REGULATION_VALUE"] = "PHASE_REGULATION_VALUE";
+  FieldType2["PHASE_REGULATION_VALUE_1"] = "PHASE_REGULATION_VALUE_1";
+  FieldType2["PHASE_REGULATION_VALUE_2"] = "PHASE_REGULATION_VALUE_2";
+  FieldType2["PHASE_REGULATION_VALUE_3"] = "PHASE_REGULATION_VALUE_3";
+  FieldType2["FREE_PROPERTIES"] = "FREE_PROPERTIES";
+  FieldType2["SUBSTATION_PROPERTY"] = "SUBSTATION_PROPERTY";
+  FieldType2["SUBSTATION_PROPERTY_1"] = "SUBSTATION_PROPERTY_1";
+  FieldType2["SUBSTATION_PROPERTY_2"] = "SUBSTATION_PROPERTY_2";
+  FieldType2["VOLTAGE_LEVEL_PROPERTY"] = "VOLTAGE_LEVEL_PROPERTY";
+  FieldType2["VOLTAGE_LEVEL_PROPERTY_1"] = "VOLTAGE_LEVEL_PROPERTY_1";
+  FieldType2["VOLTAGE_LEVEL_PROPERTY_2"] = "VOLTAGE_LEVEL_PROPERTY_2";
+  FieldType2["VOLTAGE_LEVEL_PROPERTY_3"] = "VOLTAGE_LEVEL_PROPERTY_3";
+  FieldType2["SVAR_REGULATION_MODE"] = "SVAR_REGULATION_MODE";
+  FieldType2["VOLTAGE_SET_POINT"] = "VOLTAGE_SET_POINT";
+  FieldType2["ACTIVE_POWER_SET_POINT"] = "ACTIVE_POWER_SET_POINT";
+  FieldType2["REACTIVE_POWER_SET_POINT"] = "REACTIVE_POWER_SET_POINT";
+  FieldType2["REMOTE_REGULATED_TERMINAL"] = "REMOTE_REGULATED_TERMINAL";
+  FieldType2["REGULATING_TERMINAL_VL_ID"] = "REGULATING_TERMINAL_VL_ID";
+  FieldType2["REGULATING_TERMINAL_CONNECTABLE_ID"] = "REGULATING_TERMINAL_CONNECTABLE_ID";
+  FieldType2["REGULATION_TYPE"] = "REGULATION_TYPE";
+  FieldType2["AUTOMATE"] = "AUTOMATE";
+  FieldType2["LOW_VOLTAGE_SET_POINT"] = "LOW_VOLTAGE_SET_POINT";
+  FieldType2["HIGH_VOLTAGE_SET_POINT"] = "HIGH_VOLTAGE_SET_POINT";
+  FieldType2["LOW_VOLTAGE_THRESHOLD"] = "LOW_VOLTAGE_THRESHOLD";
+  FieldType2["HIGH_VOLTAGE_THRESHOLD"] = "HIGH_VOLTAGE_THRESHOLD";
+  FieldType2["SUSCEPTANCE_FIX"] = "SUSCEPTANCE_FIX";
+  FieldType2["PAIRED"] = "PAIRED";
+  FieldType2["CONVERTERS_MODE"] = "CONVERTERS_MODE";
+  FieldType2["CONVERTER_STATION_ID_1"] = "CONVERTER_STATION_ID_1";
+  FieldType2["CONVERTER_STATION_ID_2"] = "CONVERTER_STATION_ID_2";
+  FieldType2["CONVERTER_STATION_NOMINAL_VOLTAGE_1"] = "CONVERTER_STATION_NOMINAL_VOLTAGE_1";
+  FieldType2["CONVERTER_STATION_NOMINAL_VOLTAGE_2"] = "CONVERTER_STATION_NOMINAL_VOLTAGE_2";
+  FieldType2["DC_NOMINAL_VOLTAGE"] = "DC_NOMINAL_VOLTAGE";
+  FieldType2["PAIRING_KEY"] = "PAIRING_KEY";
+  FieldType2["TIE_LINE_ID"] = "TIE_LINE_ID";
+  FieldType2["LOW_SHORT_CIRCUIT_CURRENT_LIMIT"] = "LOW_SHORT_CIRCUIT_CURRENT_LIMIT";
+  FieldType2["HIGH_SHORT_CIRCUIT_CURRENT_LIMIT"] = "HIGH_SHORT_CIRCUIT_CURRENT_LIMIT";
+  FieldType2["R"] = "R";
+  FieldType2["X"] = "X";
+  FieldType2["G"] = "G";
+  FieldType2["G1"] = "G1";
+  FieldType2["G2"] = "G2";
+  FieldType2["B"] = "B";
+  FieldType2["B1"] = "B1";
+  FieldType2["B2"] = "B2";
+  FieldType2["RATED_NOMINAL_POWER"] = "RATED_NOMINAL_POWER";
+  FieldType2["MINIMUM_ACTIVE_POWER"] = "MINIMUM_ACTIVE_POWER";
+  FieldType2["MAXIMUM_ACTIVE_POWER"] = "MAXIMUM_ACTIVE_POWER";
+  FieldType2["DROOP"] = "DROOP";
+  FieldType2["TRANSIENT_REACTANCE"] = "TRANSIENT_REACTANCE";
+  FieldType2["STEP_UP_TRANSFORMER_REACTANCE"] = "STEP_UP_TRANSFORMER_REACTANCE";
+  FieldType2["Q_PERCENT"] = "Q_PERCENT";
+  FieldType2["ACTIVE_POWER"] = "ACTIVE_POWER";
+  FieldType2["REACTIVE_POWER"] = "REACTIVE_POWER";
+  FieldType2["RATED_U1"] = "RATED_U1";
+  FieldType2["RATED_U2"] = "RATED_U2";
+  FieldType2["RATIO_LOW_TAP_POSITION"] = "RATIO_LOW_TAP_POSITION";
+  FieldType2["RATIO_TAP_POSITION"] = "RATIO_TAP_POSITION";
+  FieldType2["RATIO_TARGET_DEADBAND"] = "RATIO_TARGET_DEADBAND";
+  FieldType2["REGULATION_VALUE"] = "REGULATION_VALUE";
+  FieldType2["PHASE_LOW_TAP_POSITION"] = "PHASE_LOW_TAP_POSITION";
+  FieldType2["PHASE_TAP_POSITION"] = "PHASE_TAP_POSITION";
+  FieldType2["PHASE_TARGET_DEADBAND"] = "PHASE_TARGET_DEADBAND";
+  return FieldType2;
+})(FieldType || {});
+export {
+  FieldType
+};

package/dist/utils/types/index.d.ts

@@ -10,3 +10,4 @@ export * from './equipmentTypes';
 export * from './metadata';
 export * from './types';
 export * from './modificationType';
+export * from './fieldType';

package/dist/utils/types/index.js

@@ -2,6 +2,7 @@ import { ElementType } from "./elementType.js";
 import { EQUIPMENT_TYPE, EquipmentType, OperatingStatus, TYPE_TAG_MAX_SIZE, VL_TAG_MAX_SIZE, equipmentStyles, getEquipmentsInfosForSearchBar } from "./equipmentType.js";
 import { Battery, BusBar, DanglingLine, Generator, Hvdc, LCC, Line, Load, SVC, ShuntCompensator, Substation, ThreeWindingTransfo, TwoWindingTransfo, VSC, VoltageLevel } from "./equipmentTypes.js";
 import { MODIFICATION_TYPES, ModificationType } from "./modificationType.js";
+import { FieldType } from "./fieldType.js";
 export {
   Battery,
   BusBar,
@@ -9,6 +10,7 @@ export {
   EQUIPMENT_TYPE,
   ElementType,
   EquipmentType,
+  FieldType,
   Generator,
   Hvdc,
   LCC,

package/package.json

@@ -1,6 +1,6 @@
 {
     "name": "@gridsuite/commons-ui",
-    "version": "0.76.0",
+    "version": "0.77.0",
     "description": "common react components for gridsuite applications",
     "engines": {
         "npm": ">=9",