@gridsuite/commons-ui 0.270.0 → 0.272.0

package/dist/translations/fr/filterExpertFr.d.ts

@@ -75,9 +75,6 @@ export declare const filterExpertFr: {
     hasPhaseTapChanger3: string;
     Voltage: string;
     ReactivePower: string;
-    VoltageRegulation: string;
-    FixedRatio: string;
-    CurrentLimiter: string;
     ActivePowerControl: string;
     ratioRegulationMode: string;
     ratioRegulationMode1: string;

package/dist/translations/fr/filterExpertFr.js

@@ -69,9 +69,6 @@ const filterExpertFr = {
   hasPhaseTapChanger3: "Déphaseur 3 existe",
   Voltage: "Tension",
   ReactivePower: "Puissance réactive",
-  VoltageRegulation: "Réglage tension",
-  FixedRatio: "Rapport fixe",
-  CurrentLimiter: "Limitation de courant",
   ActivePowerControl: "Suivi de transit",
   ratioRegulationMode: "Mode de réglage du régleur",
   ratioRegulationMode1: "Mode de réglage du régleur 1",

package/dist/translations/fr/network-modification-validationFr.d.ts

@@ -16,6 +16,7 @@ export declare const networkModificationValidationFr: {
     WrongRefOrValueError: string;
     ValueMustBeNumericWhenPercentageError: string;
     ValueMustBeRefWhenPercentageError: string;
+    TargetDeadbandMustBeGreaterOrEqualToZero: string;
     TemporaryLimitNameUnicityError: string;
     TemporaryLimitDurationUnicityError: string;
     LimitSetApplicabilityError: string;

package/dist/translations/fr/network-modification-validationFr.js

@@ -1,4 +1,4 @@
-import { VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR, VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR, WRONG_REF_OR_VALUE_ERROR, REACTIVE_LIMITS_MIN_MAX_INVALID, ACTIVE_LIMITS_MIN_MAX_INVALID, MIN_ACTIVE_POWER_MUST_BE_LESS_OR_EQUAL_TO_MAX_ACTIVE_POWER, SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT, MAXIMUM_SECTION_COUNT_MUST_BE_GREATER_OR_EQUAL_TO_ONE, SHUNT_COMPENSATOR_ERROR_Q_AT_NOMINAL_VOLTAGE_LESS_THAN_ZERO, SHORT_CIRCUIT_CURRENT_LIMIT_MUST_BE_GREATER_OR_EQUAL_TO_ZERO, CREATE_SUBSTATION_IN_VOLTAGE_LEVEL_IDENTICAL_ID } from "../../utils/constants/translationKeys.js";
+import { TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO, VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR, VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR, WRONG_REF_OR_VALUE_ERROR, REACTIVE_LIMITS_MIN_MAX_INVALID, ACTIVE_LIMITS_MIN_MAX_INVALID, MIN_ACTIVE_POWER_MUST_BE_LESS_OR_EQUAL_TO_MAX_ACTIVE_POWER, SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT, MAXIMUM_SECTION_COUNT_MUST_BE_GREATER_OR_EQUAL_TO_ONE, SHUNT_COMPENSATOR_ERROR_Q_AT_NOMINAL_VOLTAGE_LESS_THAN_ZERO, SHORT_CIRCUIT_CURRENT_LIMIT_MUST_BE_GREATER_OR_EQUAL_TO_ZERO, CREATE_SUBSTATION_IN_VOLTAGE_LEVEL_IDENTICAL_ID } from "../../utils/constants/translationKeys.js";
 import "../../utils/conversionUtils.js";
 import "../../utils/types/equipmentType.js";
 import "react/jsx-runtime";
@@ -21,6 +21,7 @@ const networkModificationValidationFr = {
   [WRONG_REF_OR_VALUE_ERROR]: "Veuillez saisir une valeur numérique valide ou une référence de champ valide. Utiliser # pour sélectionner un champ",
   [VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR]: "Lors de l'utilisation de %, ce champ doit être une valeur numérique positive valide",
   [VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR]: "Lors de l'utilisation de %, ce champ doit être une référence de champ valide",
+  [TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO]: "La valeur de la bande morte doit être supérieure ou égale à 0",
   TemporaryLimitNameUnicityError: "Les noms des limites temporaires doivent être uniques dans la table",
   TemporaryLimitDurationUnicityError: "Les tempos des limites temporaires doivent être uniques dans la table",
   LimitSetApplicabilityError: "2 jeux de limites de même nom doivent s'appliquer sur des côtés différents.",

package/dist/translations/fr/networkModificationsFr.d.ts

@@ -73,6 +73,17 @@ export declare const networkModificationsFr: {
     'network_modifications.CREATE_VOLTAGE_LEVEL_TOPOLOGY': string;
     'network_modifications.CREATE_VOLTAGE_LEVEL_SECTION': string;
     'network_modifications.MOVE_VOLTAGE_LEVEL_FEEDER_BAYS': string;
+    SubstationTab: string;
+    ConnectivityTab: string;
+    CharacteristicsTab: string;
+    LimitsTab: string;
+    SetpointsAndLimitsTab: string;
+    SpecificTab: string;
+    StructureTab: string;
+    AdditionalInformationTab: string;
+    StateEstimationTab: string;
+    TwoWindingsTransformerRatioTapChangerTab: string;
+    TwoWindingsTransformerPhaseTapChangerTab: string;
     ModificationReadError: string;
     CompositeModification: string;
     CreateSubstation: string;
@@ -289,6 +300,65 @@ export declare const networkModificationsFr: {
     filter: string;
     G: string;
     B: string;
+    CreateTwoWindingsTransformer: string;
+    TwoWindingsTransformerCreationError: string;
+    ConfigureRatioTapChanger: string;
+    WithRatioTapChanger: string;
+    ConfigurePhaseTapChanger: string;
+    WithPhaseTapChanger: string;
+    RegulatedSide: string;
+    RatioRegulatedSide: string;
+    PhaseRegulatedSide: string;
+    RegulatedSide1: string;
+    RegulatedSide2: string;
+    RatedVoltage: string;
+    RegulationSection: string;
+    OnLoad: string;
+    RegulationMode: string;
+    TargetVoltage: string;
+    TargetVoltageMustBeGreaterThanZero: string;
+    Deadband: string;
+    TargetDeadbandMustBeGreaterOrEqualToZero: string;
+    LowTapPosition: string;
+    HighTapPosition: string;
+    TapPosition: string;
+    TapPositionMustBeBetweenLowAndHighTapPositionValue: string;
+    RegulatedTerminal: string;
+    TapsSection: string;
+    Tap: string;
+    DeltaResistance: string;
+    DeltaReactance: string;
+    DeltaConductance: string;
+    DeltaSusceptance: string;
+    Ratio: string;
+    Alpha: string;
+    ImportFileResistance: string;
+    ImportFileReactance: string;
+    ImportFileConductance: string;
+    ImportFileSusceptance: string;
+    ImportFileAlpha: string;
+    CreateRegulationRule: string;
+    LowTapRatio: string;
+    HighTapRatio: string;
+    ImportRegulationRule: string;
+    CreateDephasingRule: string;
+    ResetRegulationRule: string;
+    LowTapAlpha: string;
+    HighTapAlpha: string;
+    ImportDephasingRule: string;
+    GenerateSkeleton: string;
+    RegulatingValueCurrentLimiter: string;
+    CurrentLimiterMustBeGreaterThanZero: string;
+    RegulatingValueActivePowerControl: string;
+    VoltageRegulation: string;
+    FixedRatio: string;
+    CurrentLimiter: string;
+    PhaseActivePowerControl: string;
+    RatedNominalPowerMustBeGreaterThanZero: string;
+    PhaseShiftValuesError: string;
+    GeneratePhaseTapRowsError: string;
+    GenerateRatioTapRowsError: string;
+    RatioValuesError: string;
     maximumSusceptance: string;
     minSusceptance: string;
     maxQAtVnominal: string;
@@ -313,15 +383,6 @@ export declare const networkModificationsFr: {
     StaticVarCompensatorAdditionalInfosTab: string;
     b0: string;
     fixQAtNominalV: string;
-    SubstationTab: string;
-    ConnectivityTab: string;
-    CharacteristicsTab: string;
-    LimitsTab: string;
-    SetpointsAndLimitsTab: string;
-    SpecificTab: string;
-    StructureTab: string;
-    AdditionalInformationTab: string;
-    StateEstimationTab: string;
     copyLink: string;
     linkCopied: string;
     linkCopyError: string;

package/dist/translations/fr/networkModificationsFr.js

@@ -67,6 +67,18 @@ const networkModificationsFr = {
   "network_modifications.CREATE_VOLTAGE_LEVEL_TOPOLOGY": "Ajout d'un jeu de barre dans le poste {computedLabel}",
   "network_modifications.CREATE_VOLTAGE_LEVEL_SECTION": "Ajout de section / tronçon dans le poste {computedLabel}",
   "network_modifications.MOVE_VOLTAGE_LEVEL_FEEDER_BAYS": "Déplacements de départs dans le poste {computedLabel}",
+  // Tabs
+  SubstationTab: "Site",
+  ConnectivityTab: "Connectivité",
+  CharacteristicsTab: "Caractéristiques",
+  LimitsTab: "Limites",
+  SetpointsAndLimitsTab: "Consignes & Limites",
+  SpecificTab: "Spécifique",
+  StructureTab: "Structure",
+  AdditionalInformationTab: "Compléments",
+  StateEstimationTab: "Estimation d'état",
+  TwoWindingsTransformerRatioTapChangerTab: "Régleur",
+  TwoWindingsTransformerPhaseTapChangerTab: "Déphaseur",
   ModificationReadError: "Une erreur est survenue lors de la récupération de la modification",
   CompositeModification: "Modification composite",
   CreateSubstation: "Créer un site",
@@ -283,6 +295,65 @@ const networkModificationsFr = {
   filter: "Filtre",
   G: "Conductance magnétisante",
   B: "Susceptance magnétisante",
+  CreateTwoWindingsTransformer: "Créer un transformateur à 2 enroulements",
+  TwoWindingsTransformerCreationError: "Erreur lors de la création d'un transformateur à 2 enroulements",
+  ConfigureRatioTapChanger: "Créer régleur",
+  WithRatioTapChanger: "Avec régleur",
+  ConfigurePhaseTapChanger: "Créer déphaseur",
+  WithPhaseTapChanger: "Avec déphaseur",
+  RegulatedSide: "Côté réglé",
+  RatioRegulatedSide: "Côté réglé régleur",
+  PhaseRegulatedSide: "Côté réglé déphaseur",
+  RegulatedSide1: "côté 1",
+  RegulatedSide2: "côté 2",
+  RatedVoltage: "Tension d'enroulement",
+  RegulationSection: "Réglage",
+  OnLoad: "Passage de prises en charge",
+  RegulationMode: "Mode de réglage",
+  TargetVoltage: "Consigne de tension",
+  TargetVoltageMustBeGreaterThanZero: "La tension doit être supérieure à 0",
+  Deadband: "Bande morte",
+  TargetDeadbandMustBeGreaterOrEqualToZero: "La valeur de la bande morte doit être supérieure ou égale à 0",
+  LowTapPosition: "Prise min",
+  HighTapPosition: "Prise max",
+  TapPosition: "Prise courante",
+  TapPositionMustBeBetweenLowAndHighTapPositionValue: "La valeur de la prise courante doit être comprise entre la valeur de Prise min et Prise max",
+  RegulatedTerminal: "Terminal réglé",
+  TapsSection: "Prises",
+  Tap: "Prise",
+  DeltaResistance: "Δ Résistance (%)",
+  DeltaReactance: "Δ Réactance (%)",
+  DeltaConductance: "Δ Conductance (%)",
+  DeltaSusceptance: "Δ Susceptance (%)",
+  Ratio: "Rapport",
+  Alpha: "Déphasage (°)",
+  ImportFileResistance: "Resistance",
+  ImportFileReactance: "Reactance",
+  ImportFileConductance: "Conductance",
+  ImportFileSusceptance: "Susceptance",
+  ImportFileAlpha: "Dephasage",
+  CreateRegulationRule: "Créer une loi de régleur",
+  LowTapRatio: "Rapport (prise min)",
+  HighTapRatio: "Rapport (prise max)",
+  ImportRegulationRule: "Importer une loi de régleur",
+  CreateDephasingRule: "Créer une loi de déphasage",
+  ResetRegulationRule: "Réinitialiser la loi de réglage",
+  LowTapAlpha: "Déphasage (prise min)",
+  HighTapAlpha: "Déphasage (prise max)",
+  ImportDephasingRule: "Importer une loi de déphasage",
+  GenerateSkeleton: "Générer le modèle",
+  RegulatingValueCurrentLimiter: "Limitation du courant",
+  CurrentLimiterMustBeGreaterThanZero: "La valeur de la limitation du courant doit être supérieure à 0",
+  RegulatingValueActivePowerControl: "Consigne de transit",
+  VoltageRegulation: "Réglage tension",
+  FixedRatio: "Rapport fixe",
+  CurrentLimiter: "Limitation de courant",
+  PhaseActivePowerControl: "Suivi de transit",
+  RatedNominalPowerMustBeGreaterThanZero: "La valeur de la puissance nominale doit être supérieure à 0",
+  PhaseShiftValuesError: "Les valeurs de déphasage doivent être ordonnées et sans duplication",
+  GeneratePhaseTapRowsError: "Veuillez générer les prises du déphaseur",
+  GenerateRatioTapRowsError: "Veuillez générer les prises du régleur",
+  RatioValuesError: "Les rapports de transformation doivent être ordonnés et sans duplication",
   maximumSusceptance: "Susceptance max",
   minSusceptance: "Susceptance min",
   maxQAtVnominal: "Q max à tension nominale",
@@ -307,16 +378,6 @@ const networkModificationsFr = {
   StaticVarCompensatorAdditionalInfosTab: "Compléments",
   b0: "Susceptance fixe",
   fixQAtNominalV: "Q fixe",
-  // Tabs
-  SubstationTab: "Site",
-  ConnectivityTab: "Connectivité",
-  CharacteristicsTab: "Caractéristiques",
-  LimitsTab: "Limites",
-  SetpointsAndLimitsTab: "Consignes & Limites",
-  SpecificTab: "Spécifique",
-  StructureTab: "Structure",
-  AdditionalInformationTab: "Compléments",
-  StateEstimationTab: "Estimation d'état",
   copyLink: "Copier le lien",
   linkCopied: "Lien copié",
   linkCopyError: "Erreur lors de la copie du lien",

package/dist/utils/constants/fieldConstants.d.ts

@@ -13,6 +13,7 @@ export declare enum FieldConstants {
     APPLY_SEGMENTS_LIMITS = "applySegmentsLimits",
     APPLICABILITY_FIELD = "applicability",
     ASSIGNMENTS = "assignments",
+    B = "b",
     B1 = "b1",
     B2 = "b2",
     BUS_OR_BUSBAR_SECTION = "busOrBusbarSection",
@@ -35,6 +36,7 @@ export declare enum FieldConstants {
     COUNTRIES_2 = "countries2",
     COUNTRIES = "countries",
     COUNTRY = "country",
+    CURRENT_LIMITER_REGULATING_VALUE = "currentLimiterRegulatingValue",
     CURRENT_LIMITS = "currentLimits",
     CURRENT_PARAMETERS = "currentParameters",
     DELETION_MARK = "deletionMark",
@@ -44,6 +46,7 @@ export declare enum FieldConstants {
     DIRECTORY = "directory",
     DROOP = "droop",
     EDITED_FIELD = "editedField",
+    ENABLED = "enabled",
     ENERGY_SOURCE = "energySource",
     EQUIPMENT = "equipment",
     EQUIPMENT_ID = "equipmentID",
@@ -53,17 +56,23 @@ export declare enum FieldConstants {
     EQUIPMENT_TYPE = "equipmentType",
     FILTER_TYPE = "filterType",
     FILTERS = "filters",
+    FLOW_SET_POINT_REGULATING_VALUE = "flowSetPointRegulatingValue",
     FOLDER_ID = "folderId",
     FOLDER_NAME = "folderName",
     FORCED_OUTAGE_RATE = "forcedOutageRate",
     FORMATTED_CASE_PARAMETERS = "formattedCaseParameters",
     FREQUENCY_REGULATION = "frequencyRegulation",
+    G = "g",
     G1 = "g1",
     G2 = "g2",
+    HIGH_TAP_POSITION = "highTapPosition",
     HVDC_LINE_LCC_DELETION_SPECIFIC_TYPE = "HVDC_LINE_WITH_LCC",
     ID = "id",
+    REGULATING = "isRegulating",
     LOADFLOW_PARAMETERS = "loadflowParameters",
     LOAD_TYPE = "loadType",
+    LOAD_TAP_CHANGING_CAPABILITIES = "hasLoadTapChangingCapabilities",
+    LOW_TAP_POSITION = "lowTapPosition",
     MARGINAL_COST = "marginalCost",
     MIN_Q_AT_NOMINAL_V = "minQAtNominalV",
     MAX_Q_AT_NOMINAL_V = "maxQAtNominalV",
@@ -86,6 +95,8 @@ export declare enum FieldConstants {
     NOMINAL_VOLTAGE = "nominalVoltage",
     OPERATION_TYPE = "type",
     PERMANENT_LIMIT = "permanentLimit",
+    PHASE_TAP_CHANGER = "phaseTapChanger",
+    PHASE_TAP_CHANGER_STATUS = "phaseTapChangerStatus",
     PLANNED_ACTIVE_POWER_SET_POINT = "plannedActivePowerSetPoint",
     PLANNED_OUTAGE_RATE = "plannedOutageRate",
     PREVIOUS_VALUE = "previousValue",
@@ -93,8 +104,20 @@ export declare enum FieldConstants {
     PROPERTY_OPERATOR = "propertyOperator",
     PROPERTY = "PROPERTY",
     PROPERTY_VALUES = "propertyValues",
+    RATED_S = "ratedS",
+    RATED_U1 = "ratedU1",
+    RATED_U2 = "ratedU2",
     RATED_NOMINAL_POWER = "ratedNominalPower",
+    RATIO_TAP_CHANGER = "ratioTapChanger",
+    RATIO_TAP_CHANGER_STATUS = "ratioTapChangerStatus",
     REACTIVE_POWER_SET_POINT = "reactivePowerSetpoint",
+    REGULATION_MODE = "regulationMode",
+    REGULATION_SIDE = "regulationSide",
+    REGULATING_TERMINAL_CONNECTABLE_ID = "regulatingTerminalConnectableId",
+    REGULATING_TERMINAL_CONNECTABLE_TYPE = "regulatingTerminalConnectableType",
+    REGULATING_TERMINAL_VOLTAGE_LEVEL_ID = "regulatingTerminalVlId",
+    REGULATION_TYPE = "regulationType",
+    REGULATION_VALUE = "regulationValue",
     SCRIPT = "script",
     SECURITY_ANALYSIS_PARAMETERS = "securityAnalysisParameters",
     SHUNT_COMPENSATOR_SIDE_1 = "mcsOnSide1",
@@ -102,15 +125,27 @@ export declare enum FieldConstants {
     SHUNT_COMPENSATOR_SELECTED = "connectedToHvdc",
     SHUNT_COMPENSATOR_TYPE = "shuntCompensatorType",
     STATE_ESTIMATION = "stateEstimation",
+    STEPS = "steps",
+    STEPS_TAP = "index",
+    STEPS_RESISTANCE = "r",
+    STEPS_REACTANCE = "x",
+    STEPS_CONDUCTANCE = "g",
+    STEPS_SUSCEPTANCE = "b",
+    STEPS_RATIO = "rho",
+    STEPS_ALPHA = "alpha",
     SWITCHED_ON_Q_AT_NOMINAL_V = "switchedOnQAtNominalV",
     SWITCHED_ON_SUSCEPTANCE = "switchedOnSusceptance",
     STUDY_NAME = "studyName",
+    TARGET_DEADBAND = "targetDeadband",
+    TARGET_V = "targetV",
+    TO_BE_ESTIMATED = "toBeEstimated",
     TYPE = "type",
     VALIDITY = "validity",
     VALUE = "value",
     VALUE_1 = "value1",
     VALUE_2 = "value2",
     VOLTAGE_LEVEL = "voltageLevel",
+    VOLTAGE_LEVEL_ID = "voltageLevelId",
     VOLTAGE_REGULATION = "voltageRegulation",
     SWITCH_KINDS = "switchKinds",
     SWITCH_KIND = "switchKind",
@@ -163,7 +198,9 @@ export declare enum FieldConstants {
     SEGMENT_REACTANCE = "segmentReactance",
     SEGMENT_SUSCEPTANCE = "segmentSusceptance",
     SEGMENT_CURRENT_LIMITS = "segmentCurrentLimits",
+    SELECTED = "selected",
     SPECIFIC_METADATA = "specificMetadata",
+    TAP_POSITION = "tapPosition",
     TOTAL_RESISTANCE = "totalResistance",
     TOTAL_REACTANCE = "totalReactance",
     TOTAL_SUSCEPTANCE = "totalSusceptance",

package/dist/utils/constants/fieldConstants.js

@@ -7,6 +7,7 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["APPLY_SEGMENTS_LIMITS"] = "applySegmentsLimits";
   FieldConstants2["APPLICABILITY_FIELD"] = "applicability";
   FieldConstants2["ASSIGNMENTS"] = "assignments";
+  FieldConstants2["B"] = "b";
   FieldConstants2["B1"] = "b1";
   FieldConstants2["B2"] = "b2";
   FieldConstants2["BUS_OR_BUSBAR_SECTION"] = "busOrBusbarSection";
@@ -29,6 +30,7 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["COUNTRIES_2"] = "countries2";
   FieldConstants2["COUNTRIES"] = "countries";
   FieldConstants2["COUNTRY"] = "country";
+  FieldConstants2["CURRENT_LIMITER_REGULATING_VALUE"] = "currentLimiterRegulatingValue";
   FieldConstants2["CURRENT_LIMITS"] = "currentLimits";
   FieldConstants2["CURRENT_PARAMETERS"] = "currentParameters";
   FieldConstants2["DELETION_MARK"] = "deletionMark";
@@ -38,6 +40,7 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["DIRECTORY"] = "directory";
   FieldConstants2["DROOP"] = "droop";
   FieldConstants2["EDITED_FIELD"] = "editedField";
+  FieldConstants2["ENABLED"] = "enabled";
   FieldConstants2["ENERGY_SOURCE"] = "energySource";
   FieldConstants2["EQUIPMENT"] = "equipment";
   FieldConstants2["EQUIPMENT_ID"] = "equipmentID";
@@ -47,17 +50,23 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["EQUIPMENT_TYPE"] = "equipmentType";
   FieldConstants2["FILTER_TYPE"] = "filterType";
   FieldConstants2["FILTERS"] = "filters";
+  FieldConstants2["FLOW_SET_POINT_REGULATING_VALUE"] = "flowSetPointRegulatingValue";
   FieldConstants2["FOLDER_ID"] = "folderId";
   FieldConstants2["FOLDER_NAME"] = "folderName";
   FieldConstants2["FORCED_OUTAGE_RATE"] = "forcedOutageRate";
   FieldConstants2["FORMATTED_CASE_PARAMETERS"] = "formattedCaseParameters";
   FieldConstants2["FREQUENCY_REGULATION"] = "frequencyRegulation";
+  FieldConstants2["G"] = "g";
   FieldConstants2["G1"] = "g1";
   FieldConstants2["G2"] = "g2";
+  FieldConstants2["HIGH_TAP_POSITION"] = "highTapPosition";
   FieldConstants2["HVDC_LINE_LCC_DELETION_SPECIFIC_TYPE"] = "HVDC_LINE_WITH_LCC";
   FieldConstants2["ID"] = "id";
+  FieldConstants2["REGULATING"] = "isRegulating";
   FieldConstants2["LOADFLOW_PARAMETERS"] = "loadflowParameters";
   FieldConstants2["LOAD_TYPE"] = "loadType";
+  FieldConstants2["LOAD_TAP_CHANGING_CAPABILITIES"] = "hasLoadTapChangingCapabilities";
+  FieldConstants2["LOW_TAP_POSITION"] = "lowTapPosition";
   FieldConstants2["MARGINAL_COST"] = "marginalCost";
   FieldConstants2["MIN_Q_AT_NOMINAL_V"] = "minQAtNominalV";
   FieldConstants2["MAX_Q_AT_NOMINAL_V"] = "maxQAtNominalV";
@@ -80,6 +89,8 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["NOMINAL_VOLTAGE"] = "nominalVoltage";
   FieldConstants2["OPERATION_TYPE"] = "type";
   FieldConstants2["PERMANENT_LIMIT"] = "permanentLimit";
+  FieldConstants2["PHASE_TAP_CHANGER"] = "phaseTapChanger";
+  FieldConstants2["PHASE_TAP_CHANGER_STATUS"] = "phaseTapChangerStatus";
   FieldConstants2["PLANNED_ACTIVE_POWER_SET_POINT"] = "plannedActivePowerSetPoint";
   FieldConstants2["PLANNED_OUTAGE_RATE"] = "plannedOutageRate";
   FieldConstants2["PREVIOUS_VALUE"] = "previousValue";
@@ -87,8 +98,20 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["PROPERTY_OPERATOR"] = "propertyOperator";
   FieldConstants2["PROPERTY"] = "PROPERTY";
   FieldConstants2["PROPERTY_VALUES"] = "propertyValues";
+  FieldConstants2["RATED_S"] = "ratedS";
+  FieldConstants2["RATED_U1"] = "ratedU1";
+  FieldConstants2["RATED_U2"] = "ratedU2";
   FieldConstants2["RATED_NOMINAL_POWER"] = "ratedNominalPower";
+  FieldConstants2["RATIO_TAP_CHANGER"] = "ratioTapChanger";
+  FieldConstants2["RATIO_TAP_CHANGER_STATUS"] = "ratioTapChangerStatus";
   FieldConstants2["REACTIVE_POWER_SET_POINT"] = "reactivePowerSetpoint";
+  FieldConstants2["REGULATION_MODE"] = "regulationMode";
+  FieldConstants2["REGULATION_SIDE"] = "regulationSide";
+  FieldConstants2["REGULATING_TERMINAL_CONNECTABLE_ID"] = "regulatingTerminalConnectableId";
+  FieldConstants2["REGULATING_TERMINAL_CONNECTABLE_TYPE"] = "regulatingTerminalConnectableType";
+  FieldConstants2["REGULATING_TERMINAL_VOLTAGE_LEVEL_ID"] = "regulatingTerminalVlId";
+  FieldConstants2["REGULATION_TYPE"] = "regulationType";
+  FieldConstants2["REGULATION_VALUE"] = "regulationValue";
   FieldConstants2["SCRIPT"] = "script";
   FieldConstants2["SECURITY_ANALYSIS_PARAMETERS"] = "securityAnalysisParameters";
   FieldConstants2["SHUNT_COMPENSATOR_SIDE_1"] = "mcsOnSide1";
@@ -96,15 +119,27 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["SHUNT_COMPENSATOR_SELECTED"] = "connectedToHvdc";
   FieldConstants2["SHUNT_COMPENSATOR_TYPE"] = "shuntCompensatorType";
   FieldConstants2["STATE_ESTIMATION"] = "stateEstimation";
+  FieldConstants2["STEPS"] = "steps";
+  FieldConstants2["STEPS_TAP"] = "index";
+  FieldConstants2["STEPS_RESISTANCE"] = "r";
+  FieldConstants2["STEPS_REACTANCE"] = "x";
+  FieldConstants2["STEPS_CONDUCTANCE"] = "g";
+  FieldConstants2["STEPS_SUSCEPTANCE"] = "b";
+  FieldConstants2["STEPS_RATIO"] = "rho";
+  FieldConstants2["STEPS_ALPHA"] = "alpha";
   FieldConstants2["SWITCHED_ON_Q_AT_NOMINAL_V"] = "switchedOnQAtNominalV";
   FieldConstants2["SWITCHED_ON_SUSCEPTANCE"] = "switchedOnSusceptance";
   FieldConstants2["STUDY_NAME"] = "studyName";
+  FieldConstants2["TARGET_DEADBAND"] = "targetDeadband";
+  FieldConstants2["TARGET_V"] = "targetV";
+  FieldConstants2["TO_BE_ESTIMATED"] = "toBeEstimated";
   FieldConstants2["TYPE"] = "type";
   FieldConstants2["VALIDITY"] = "validity";
   FieldConstants2["VALUE"] = "value";
   FieldConstants2["VALUE_1"] = "value1";
   FieldConstants2["VALUE_2"] = "value2";
   FieldConstants2["VOLTAGE_LEVEL"] = "voltageLevel";
+  FieldConstants2["VOLTAGE_LEVEL_ID"] = "voltageLevelId";
   FieldConstants2["VOLTAGE_REGULATION"] = "voltageRegulation";
   FieldConstants2["SWITCH_KINDS"] = "switchKinds";
   FieldConstants2["SWITCH_KIND"] = "switchKind";
@@ -157,7 +192,9 @@ var FieldConstants = /* @__PURE__ */ ((FieldConstants2) => {
   FieldConstants2["SEGMENT_REACTANCE"] = "segmentReactance";
   FieldConstants2["SEGMENT_SUSCEPTANCE"] = "segmentSusceptance";
   FieldConstants2["SEGMENT_CURRENT_LIMITS"] = "segmentCurrentLimits";
+  FieldConstants2["SELECTED"] = "selected";
   FieldConstants2["SPECIFIC_METADATA"] = "specificMetadata";
+  FieldConstants2["TAP_POSITION"] = "tapPosition";
   FieldConstants2["TOTAL_RESISTANCE"] = "totalResistance";
   FieldConstants2["TOTAL_REACTANCE"] = "totalReactance";
   FieldConstants2["TOTAL_SUSCEPTANCE"] = "totalSusceptance";

package/dist/utils/constants/index.js

@@ -5,7 +5,7 @@ import { MAX_CHAR_DESCRIPTION } from "./uiConstants.js";
 import { AMPERE, DEGREE, KILO_AMPERE, KILO_METER, KILO_VOLT, MEGA_VAR, MEGA_VOLT_AMPERE, MEGA_WATT, MICRO_SIEMENS, OHM, PERCENTAGE, SIEMENS } from "./unitsConstants.js";
 import { COMMON_APP_NAME, COMMON_CONFIG_PARAMS_NAMES, LAST_SELECTED_DIRECTORY, PARAM_DEVELOPER_MODE, PARAM_LANGUAGE, PARAM_THEME } from "./configConstants.js";
 import { FILTERS, FILTER_ID, FILTER_NAME, ID } from "./filterConstant.js";
-import { ACTIVE_LIMITS_MIN_MAX_INVALID, CREATE_SUBSTATION_IN_VOLTAGE_LEVEL_IDENTICAL_ID, DESCRIPTION_LIMIT_ERROR, DUPLICATED_PROPS_ERROR, MAXIMUM_SECTION_COUNT_MUST_BE_GREATER_OR_EQUAL_TO_ONE, MIN_ACTIVE_POWER_MUST_BE_LESS_OR_EQUAL_TO_MAX_ACTIVE_POWER, MUST_BE_GREATER_OR_EQUAL_TO_ZERO, NAME_ALREADY_USED, NAME_EMPTY, NORMALIZED_PERCENTAGE, NUMERIC_VALUE_OR_EMPTY_FIELD, REACTIVE_LIMITS_MIN_MAX_INVALID, REAL_PERCENTAGE, SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT, SHORT_CIRCUIT_CURRENT_LIMIT_MUST_BE_GREATER_OR_EQUAL_TO_ZERO, SHUNT_COMPENSATOR_ERROR_Q_AT_NOMINAL_VOLTAGE_LESS_THAN_ZERO, VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR, VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR, WRONG_REF_OR_VALUE_ERROR, YUP_DEFAULT, YUP_NOT_NULL, YUP_NOT_TYPE_DEFAULT, YUP_NOT_TYPE_NUMBER, YUP_POSITIVE, YUP_REQUIRED } from "./translationKeys.js";
+import { ACTIVE_LIMITS_MIN_MAX_INVALID, CREATE_SUBSTATION_IN_VOLTAGE_LEVEL_IDENTICAL_ID, DESCRIPTION_LIMIT_ERROR, DUPLICATED_PROPS_ERROR, MAXIMUM_SECTION_COUNT_MUST_BE_GREATER_OR_EQUAL_TO_ONE, MIN_ACTIVE_POWER_MUST_BE_LESS_OR_EQUAL_TO_MAX_ACTIVE_POWER, MUST_BE_GREATER_OR_EQUAL_TO_ZERO, NAME_ALREADY_USED, NAME_EMPTY, NORMALIZED_PERCENTAGE, NUMERIC_VALUE_OR_EMPTY_FIELD, REACTIVE_LIMITS_MIN_MAX_INVALID, REAL_PERCENTAGE, SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT, SHORT_CIRCUIT_CURRENT_LIMIT_MUST_BE_GREATER_OR_EQUAL_TO_ZERO, SHUNT_COMPENSATOR_ERROR_Q_AT_NOMINAL_VOLTAGE_LESS_THAN_ZERO, TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO, VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR, VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR, WRONG_REF_OR_VALUE_ERROR, YUP_DEFAULT, YUP_NOT_NULL, YUP_NOT_TYPE_DEFAULT, YUP_NOT_TYPE_NUMBER, YUP_POSITIVE, YUP_REQUIRED } from "./translationKeys.js";
 export {
   ACTIVE_LIMITS_MIN_MAX_INVALID,
   AMPERE,
@@ -58,6 +58,7 @@ export {
   SHUNT_COMPENSATOR_ERROR_Q_AT_NOMINAL_VOLTAGE_LESS_THAN_ZERO,
   SIEMENS,
   SusceptanceAdornment,
+  TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO,
   VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR,
   VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR,
   VoltageAdornment,

package/dist/utils/constants/translationKeys.d.ts

@@ -18,6 +18,7 @@ export declare const MAXIMUM_SECTION_COUNT_MUST_BE_GREATER_OR_EQUAL_TO_ONE = "Ma
 export declare const SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT = "SectionCountMustBeBetweenZeroAndMaximumSectionCount";
 export declare const CREATE_SUBSTATION_IN_VOLTAGE_LEVEL_IDENTICAL_ID = "CreateSubstationInVoltageLevelIdenticalId";
 export declare const MIN_ACTIVE_POWER_MUST_BE_LESS_OR_EQUAL_TO_MAX_ACTIVE_POWER = "MinActivePowerMustBeLessOrEqualToMaxActivePower";
+export declare const TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO = "TargetDeadbandMustBeGreaterOrEqualToZero";
 export declare const NAME_ALREADY_USED = "nameAlreadyUsed";
 export declare const NUMERIC_VALUE_OR_EMPTY_FIELD = "NumericValueOrEmptyField";
 export declare const WRONG_REF_OR_VALUE_ERROR = "WrongRefOrValueError";

package/dist/utils/constants/translationKeys.js

@@ -18,6 +18,7 @@ const MAXIMUM_SECTION_COUNT_MUST_BE_GREATER_OR_EQUAL_TO_ONE = "MaximumSectionCou
 const SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT = "SectionCountMustBeBetweenZeroAndMaximumSectionCount";
 const CREATE_SUBSTATION_IN_VOLTAGE_LEVEL_IDENTICAL_ID = "CreateSubstationInVoltageLevelIdenticalId";
 const MIN_ACTIVE_POWER_MUST_BE_LESS_OR_EQUAL_TO_MAX_ACTIVE_POWER = "MinActivePowerMustBeLessOrEqualToMaxActivePower";
+const TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO = "TargetDeadbandMustBeGreaterOrEqualToZero";
 const NAME_ALREADY_USED = "nameAlreadyUsed";
 const NUMERIC_VALUE_OR_EMPTY_FIELD = "NumericValueOrEmptyField";
 const WRONG_REF_OR_VALUE_ERROR = "WrongRefOrValueError";
@@ -40,6 +41,7 @@ export {
   SECTION_COUNT_MUST_BE_BETWEEN_ZERO_AND_MAXIMUM_SECTION_COUNT,
   SHORT_CIRCUIT_CURRENT_LIMIT_MUST_BE_GREATER_OR_EQUAL_TO_ZERO,
   SHUNT_COMPENSATOR_ERROR_Q_AT_NOMINAL_VOLTAGE_LESS_THAN_ZERO,
+  TARGET_DEADBAND_MUST_BE_GREATER_OR_EQUAL_TO_ZERO,
   VALUE_MUST_BE_NUMERIC_WHEN_PERCENTAGE_ERROR,
   VALUE_MUST_BE_REF_WHEN_PERCENTAGE_ERROR,
   WRONG_REF_OR_VALUE_ERROR,

package/dist/utils/functions.d.ts

@@ -27,3 +27,12 @@ export declare const areArrayElementsUnique: (array: unknown[]) => boolean;
 export declare function isEmpty(value: any): boolean;
 export declare const isObjectEmpty: (object: object) => boolean;
 export declare function getRows(rows: any[] | undefined, status: string): any[];
+/**
+ * Returns true if every element of this array is a number and they are ordered (ascending or descending)
+ * @param array or numbers
+ * @returns {boolean}
+ */
+export declare const areNumbersOrdered: (array?: unknown) => boolean;
+export declare const addSelectedFieldToRows: <T>(rows?: T[]) => (T & {
+    selected: boolean;
+})[];

package/dist/utils/functions.js

@@ -1,5 +1,6 @@
 import { FieldConstants } from "./constants/fieldConstants.js";
 import { RunningStatus } from "./running-status.js";
+import { toNumber } from "./validation-functions.js";
 const hasNonEmptyRows = (rows) => Array.isArray(rows) && rows.some(
   (row) => row && Object.keys(row).filter((key) => key !== FieldConstants.AG_GRID_ROW_UUID).some((key) => row[key] !== void 0 && row[key] !== null && String(row[key]).trim().length > 0)
 );
@@ -24,8 +25,47 @@ const isObjectEmpty = (object) => object && Object.keys(object).length === 0;
 function getRows(rows, status) {
   return status === RunningStatus.SUCCEED && rows ? rows : [];
 }
+const areNumbersOrdered = (array) => {
+  if (!Array.isArray(array)) {
+    return false;
+  }
+  if (array.length === 0) {
+    return true;
+  }
+  if (array.length === 1) {
+    return !Number.isNaN(toNumber(array[0]));
+  }
+  let current = toNumber(array[0]);
+  if (Number.isNaN(current)) {
+    return false;
+  }
+  let order = null;
+  for (let i = 1; i < array.length; i++) {
+    const nextOne = toNumber(array[i]);
+    if (Number.isNaN(nextOne)) {
+      return false;
+    }
+    if (current !== nextOne) {
+      if (order === null) {
+        order = current < nextOne ? "asc" : "desc";
+      }
+      if (order === "asc" && current > nextOne || order === "desc" && current < nextOne) {
+        return false;
+      }
+      current = nextOne;
+    }
+  }
+  return true;
+};
+const addSelectedFieldToRows = (rows) => {
+  return rows?.map((row) => {
+    return { ...row, [FieldConstants.SELECTED]: false };
+  }) ?? [];
+};
 export {
+  addSelectedFieldToRows,
   areArrayElementsUnique,
+  areNumbersOrdered,
   arraysContainIdenticalStrings,
   getRows,
   hasNonEmptyRows,