@grepr/cli 1.11.5-c840124 → 1.11.5-dbd05e7

package/build/dist/docs-index/cf3bdd6b-6e22-4792-8ace-4db256f63620.txt

@@ -0,0 +1,18 @@
+# ExceptionUsageResponse
+
+Usage the vendor reports for an integration's parsed queries
+
+**Type**: `object`
+
+## Properties
+
+- name: reportedTypes (required)
+  type: array of string
+  description: The parsed query exception types (values of a parsed query's exceptionType) the vendor reports usage for. Empty when the vendor reports none; a query of any other type has no usage to show.
+
+- name: status (required)
+  type: `UsageStatus`
+
+- name: usage (required)
+  type: object
+  description: Usage keyed by composite exception id (integrationId:vendorResourceId:exceptionType), the key the impacts endpoint uses. A query the vendor reported nothing for is absent, which is not the same as never viewed.

package/build/dist/docs-index/d3ad9fc5-67cb-4e1f-aeae-776930e67d73.txt

@@ -0,0 +1,148 @@
+Create a Grepr AI agent, write its instructions, choose its model, set the limits that bound what it spends, and edit or delete it later.
+
+# Create an AI agent
+
+You create an agent once and it runs from then on, so the settings you choose decide both what the agent is good at and what it costs. This page covers the settings that define the agent itself. Its capabilities, its memory, and its subscriptions each have their own page, and the wizard links to the same settings.
+
+## Requirements
+
+Before you create an agent, you need:
+
+* An LLM integration for the model the agent reasons with. See [_](/integrations/llm).
+* A Grepr service account for the agent to act as. See [_](/admin/service-accounts).
+
+## Create an agent \[#create]
+
+On the **Agents** page, click **Create agent**. The **Create agent** wizard collects the agent's settings in six steps, and you can move between steps with **Back** and **Continue** or by clicking a step in the stepper. The agent is created when you click **Create agent** on the last step, so you can revise any step before then.
+
+### Step 1: Name the agent and write its instructions \[#step1-instructions]
+
+Enter a **Name** that says what the agent is for, such as `prod-log-triage`. The name identifies the agent everywhere you subscribe it to a source or read its investigations, and you can change it later.
+
+In the **System prompt** field, write the instructions that frame every investigation this agent runs. To start from a working example rather than an empty field, click **Use a starter prompt** and edit what it gives you.
+
+### Step 2: Choose a model \[#step2-model]
+
+1. In the **Provider** menu, select the provider of the LLM integration you want the agent to use.
+2. In the **LLM integration** menu, select the integration that provides the credentials for that provider. If the menu is empty, create the integration first. See [_](/integrations/llm).
+3. In the **Model name** field, enter the model the agent reasons with. Grepr suggests the models your integration reports, but the field accepts any model identifier the provider serves, so a model missing from the list is still valid.
+4. Set the agent's limits under **Advanced configuration**. See [Set an agent's limits](#limits).
+
+Investigations are long-running and tool-heavy, so the model you choose changes how well the agent reasons across many turns, not just how fast it answers. Prefer a model that handles extended tool use.
+
+### Step 3: Grant capabilities \[#step3-capabilities]
+
+The **Capabilities** step is where you choose the service account the agent acts as, the tools and skills it can use, the MCP servers it can call, and whether the pipeline changes it proposes need your approval. To learn more, see [_](/ai-agents/capabilities).
+
+### Step 4: Configure memory \[#step4-memory]
+
+The **Memory** step is where you decide whether the agent keeps and searches conclusions from its past investigations. To learn more, see [_](/ai-agents/memory).
+
+### Step 5: Subscribe to signal sources \[#step5-subscriptions]
+
+The **Subscriptions** step is where you connect the agent to the pipelines and Grepr Agent integrations whose signals it investigates. You can leave it empty and subscribe later from the agent's page. To learn more, see [_](/ai-agents/subscriptions).
+
+### Step 6: Review and create \[#step6-review]
+
+The **Review** step lists every setting you chose. Check the system prompt, the model, the abilities and tools, and the subscriptions, then click **Create agent**.
+
+An agent with subscriptions starts investigating as soon as its sources produce signals. To review its behavior before it runs on live signals, create it without subscriptions, start an investigation manually, read the transcript, then subscribe it. See [_](/ai-agents/investigations#start-manual).
+
+## Set an agent's limits \[#limits]
+
+An agent's limits are under **Advanced configuration** on the **Model** step, and on the **Behavior** step after the agent exists. They are what bound the work and the cost of a single investigation and of the agent as a whole.
+
+### Limit a single investigation \[#run-limits]
+
+| Setting | What it does |
+| --- | --- |
+| **Max output tokens** | The largest response Grepr accepts from the model in one call. |
+| **Max turns per investigation** | How many turns an investigation can take before it ends. A turn is one model call and the tool calls that follow it. |
+| **Max tokens per investigation** | The total tokens one investigation can consume. The default is 3,000,000. |
+
+An investigation that reaches its turn or token limit ends where it is, keeping the transcript and the summary it had reached.
+
+### Limit the agent as a whole \[#window-limits]
+
+**Agent max tokens per window** caps the tokens this agent can consume across all its investigations in each budget window. Leave it empty to bound the agent only by the budget on its LLM integration.
+
+Grepr reserves an investigation's tokens before it starts and requires room in two budgets: this agent's window budget, and the budget on the LLM integration the agent shares with any other agent using it. When either is exhausted, new investigations stop starting, and the agent's page reports which budget blocked them and when the window resets. Raising this agent's limit does not help when the shared integration is the one that is full. To set the integration's budget, see [_](/integrations/llm#max-tokens).
+
+The two kinds of invocations, manual and signal triggered, end differently when a budget is exhausted. An investigation you start manually is discarded immediately, so you learn straight away. One triggered by a signal stays queued and runs when capacity returns, unless it waits longer than the maximum queue wait.
+
+### Control concurrency and queueing \[#concurrency]
+
+| Setting | What it does |
+| --- | --- |
+| **Max concurrent investigations** | How many of this agent's investigations run at the same time. The default is 3. |
+| **When at the limit** | Whether an additional signal waits or is dropped. **Queue** holds it until a slot frees. **Discard** drops it. |
+| **Max queue wait (minutes)** | How long a queued investigation waits before Grepr discards it. Leave empty for no limit. |
+
+The maximum queue wait applies only to investigations triggered by a signal, not to the ones you start manually. Set it when a stale signal is not worth investigating, such as a pattern that stopped occurring an hour ago. Leave it empty when you want every signal investigated eventually.
+
+An agent subscribed to a busy pipeline can produce more signals than it can investigate. **Discard** keeps the agent current at the cost of skipping signals, and **Queue** with a maximum wait keeps a bounded backlog. To reduce the signals instead of dropping them, narrow what the source emits. See [_](/ai-agents/subscriptions).
+
+## Write a system prompt \[#system-prompt]
+
+The system prompt is read at the start of every investigation this agent runs, so it should describe the agent's standing job rather than any one incident. A prompt that works well:
+
+* States what the agent is responsible for and what it should leave alone.
+* Names the systems and services it covers, using the same names that appear in your logs, so the agent can match a signal to a service.
+* Says what a finished investigation looks like, such as whether the agent should attempt a remediation or only diagnose.
+* Says when the agent should change a pipeline and when it should not.
+
+Keep behavior that only applies sometimes out of the prompt and put it in a skill, which the agent loads when it is relevant. This keeps the prompt short and lets several agents share the same guidance. See [_](/ai-agents/skills).
+
+You can revise the prompt at any time on the agent's **Behavior** step. A revised prompt applies to investigations that start afterwards, and running investigations keep the prompt they started with.
+
+## Monitor an agent \[#monitor]
+
+The agent's **Overview** step reports how the agent is doing over the time range you select, with its model, its last investigation, the share of its runs that failed, its run times, and how much of its token budget it has used. Three charts break down the investigations it started, how they ended, and the tokens they consumed.
+
+Read the failure rate together with the outcomes chart. Failures concentrated in time usually point at the model or a tool that became unavailable, while a failure rate that is steady across the range usually points at the agent's instructions or its limits.
+
+When a token budget is exhausted, new investigations stop starting and resume when the window resets. The agent's page shows which of the two budgets blocked them.
+
+## Edit an agent \[#edit]
+
+An agent's settings are spread across the steps on its page, which hold the same fields as the wizard:
+
+* **Behavior** holds the name, the system prompt, the model, and the limits.
+* **Capabilities** holds the service account, the tools, the skills, the MCP integrations, and the change approval mode.
+* **Memory** holds the memory settings.
+
+Changes on these three steps are held until you click **Save Changes**, so you can revise several steps in one pass. To abandon them, click **Discard Changes**. Subscriptions are not part of this and apply as soon as you make them.
+
+An investigation reads the agent's instructions, model, and limits when it starts, so correcting those mid-incident leaves the current run on the settings it began with and applies to the next one.
+
+The change approval mode is the exception. Grepr checks it when the agent submits a pipeline change, not when the investigation started, so switching an agent to **Auto-apply** lets an investigation that is already running apply its own changes.
+
+## Delete an agent \[#delete]
+
+To delete an agent, on its page, open the three-dot menu and select **Delete agent**. You can also delete it from the three-dot menu on its card on the **Agents** page.
+
+Grepr refuses to delete an agent while a pipeline is subscribed to it or a Grepr Agent integration names it, so detach it from both on its **Subscriptions** step first. A pipeline that names the agent directly in its agent signal sink is not covered by that check, so open the sink in each such pipeline and clear the agent from the **Agents** field yourself. A sink keeps at least one agent, so where the agent you are deleting is the only one named, either select another agent in its place or remove the sink along with the routes that feed it. A signal that arrives for a deleted agent is discarded. Investigations already running finish, and no new ones start.
+
+Deleting an agent does not delete its investigations or the memories it recorded, which stay readable and searchable by your other agents.
+
+## Frequently Asked Questions
+
+### What do I need before creating a Grepr AI agent?
+
+You need an LLM integration for the model, a Grepr service account for the agent to act as, and the Edit permission on integrations at the organization or team level.
+
+### How many investigations does a Grepr AI agent run at once?
+
+You set the maximum number of concurrent investigations, which defaults to 3, and choose whether an additional signal queues or is discarded at that limit. A queued investigation can also be given a maximum wait, after which Grepr discards it.
+
+### What happens when an agent reaches its token budget?
+
+New investigations stop starting, and the agent's page reports whether the agent's own window budget or the shared LLM integration's budget blocked them, and when the window resets. An investigation started manually is discarded immediately, while one triggered by a signal stays queued until capacity returns or its maximum queue wait elapses.
+
+### Do changes to an agent affect investigations that are already running?
+
+Mostly no. An investigation reads the instructions, model, and limits it started with, so changes to those apply to the next run. The change approval mode is the exception: Grepr checks it when the agent submits a pipeline change, so switching to Auto-apply lets an investigation that is already running apply its own changes.
+
+### Why can't I delete my Grepr AI agent?
+
+Grepr refuses to delete an agent while a pipeline is subscribed to it or a Grepr Agent integration names it. Detach it from both on its Subscriptions step, then delete it. Investigations already running finish, and its recorded memories remain searchable by your other agents.

package/build/dist/docs-index/d9604970-360e-4fca-947c-e84dcce624ec.txt

@@ -0,0 +1,33 @@
+# Get a vendor estimation run
+
+**GET** `/v1/integrations/{integrationId}/exceptions/vendor-estimation-runs/{runId}`
+
+**Operation ID**: `getVendorEstimationRun`
+**Summary**: Get a vendor estimation run
+Returns the run's state and progress. Results are readable while it runs.
+
+## Tags
+- Integration Exceptions
+## Parameters
+
+- **integrationId** (required) - path
+  - Integration id
+  - Type: string
+- **runId** (required) - path
+  - Run id
+  - Type: string
+
+## Responses
+
+### 200
+
+Run retrieved
+
+- **Content-Type**: `application/json` / `VendorEstimationRun`
+### 401
+
+Unauthorized
+
+### 404
+
+Not Found - Integration or run not found.

package/build/dist/docs-index/dc0a66c3-799a-48dc-b083-7d555f7e4a9e.txt

@@ -0,0 +1,78 @@
+Two ways to send logs to several vendor accounts, by creating a pipeline for each group or by grouping the reducer and filtering each sink.
+
+# Route logs to several vendor accounts
+
+Your logs do not all belong in the same place. Separate teams, environments, or business units each own an account in your observability platform, and a log has to reach the account that owns it. Each account you send to is its own Grepr integration.
+
+A Grepr pipeline is a free-form processing graph rather than a fixed shape, so you can arrange this in more than one way. Here are two examples, and you can combine them.
+
+## Create a pipeline for each group \[#pipeline-per-group]
+
+Create one pipeline for each group of logs that belongs together, filter its source to that group, and give it the sink for that group's account.
+
+Each pipeline summarizes only its own logs, so you can tune each one on its own. Choose this when the groups need different configurations, or when you want them isolated from each other.
+
+To create a pipeline, see [_](/tutorials/first-pipeline). To limit what one ingests, see [_](/transforms/filter-events).
+
+## Group the reducer and filter each sink \[#grouped-sinks]
+
+Run a single pipeline, add a sink for each account, and filter each sink to that account's logs. Choose this when the groups have the same configuration, and you would rather manage one pipeline than several.
+
+Routing rests on a *routing key*, which is a field whose value names the account a log belongs to, such as `account` or `team`. Two settings act on it: the reducer groups on the key, and each sink filters on it.
+
+Grouping is what makes the filtering correct. A summary carries the values of the fields it was grouped on, so grouping on the routing key gives every summary exactly one account, and each sink's filter then matches its own account and no other.
+
+> Configure the grouping before you add the sinks, because leaving it out fails quietly. Without the routing key in the group-by, logs bound for different accounts aggregate together. A tag then carries every value the merged messages had, so every account receives the same summary, reporting counts that include the other accounts' logs. An attribute is merged instead, and the default merge strategy replaces values that differ with a wildcard, so no filter matches and the summary reaches no account.
+
+### Step 1: Put the routing key on every log \[#step1-routing-key]
+
+The routing key has to be on each log before the reducer sees it, holding one value per account. If your collectors already tag logs with the owning team or environment, use that tag. If the value is inside the message, parse it into an attribute or a tag first with the Grok parser or the JSON parser. See [_](/transforms/grok) and [_](/transforms/json-parsing).
+
+A tag and an attribute both work as the routing key. Choose one whose values are few and stable, because each value aggregates separately. Decide what happens to logs carrying no value for the key, which match no filter and so reach no account: give them a default value when you parse, or add a sink that catches them.
+
+### Step 2: Group the reducer on the routing key \[#step2-group]
+
+1. On the pipeline's **Reducer** step, click **Edit** on the **Fields** card.
+2. If the routing key is listed, set its **Behaviour** to **Match or split**.
+3. If it is not listed, enter it in the **Add field** row, set the **Behaviour** to **Match or split**, and click **Add**.
+4. Click **Save**.
+
+The **Match or split** behavior keeps a field out of aggregation, so messages whose values differ are never merged into one pattern. Enter tag keys plainly, and prefix attribute paths with `@`. An attribute is merged as well as grouped, and the default merge strategy keeps the value that every message in the group agrees on. If you set a different merge strategy for the routing attribute, check that it preserves that value rather than combining or discarding it. See [_](/transforms/reducer/configuration#attribute-configuration).
+
+### Step 3: Create a Grepr integration for each account \[#step3-integrations]
+
+Create one Grepr integration for each account you send to. An integration authenticates to a single account, so its credential is what decides where its logs land. Name each integration after its account, because that name is what you select when you add the sink. See [_](/integrations).
+
+### Step 4: Add a filtered sink for each account \[#step4-sinks]
+
+Repeat for each account:
+
+1. On the pipeline's **Sinks** step, click **Add sink**.
+2. In the **Sink** menu, select the integration for the account. Grepr fills in a **Name**, which you can change.
+3. In the **Query language** menu, select the syntax you want to write the filter in.
+4. In the **Filter Query** field, enter a query that matches only that account's logs, such as `team:platform`.
+5. Click **Add**, then save the pipeline.
+
+A sink with an empty filter forwards everything, so give each sink a filter query that matches it to one account. A sink's card reports its filter and shows **All messages** when it has none, which is how you spot one you missed. The filter runs on everything the reducer emits, so summaries, samples, passthrough messages, and exceptions all follow the same routing. To learn about the filter syntax, see [_](/queries/datadog) and [_](/queries/new-relic).
+
+## Frequently Asked Questions
+
+### Can one Grepr pipeline send logs to several accounts of the same vendor?
+
+Yes. Add one sink for each account, each pointing at that account's integration, and give each sink a filter that matches only that account's logs. Group the reducer on the same routing key the filters use, so that each summary belongs to exactly one account.
+
+### Why does the reducer need to group on the routing key?
+
+Without it, logs for different accounts aggregate together and the summary no longer identifies one account. If the key is a tag, the summary carries every value the merged messages had, so each account's filter matches it and every account receives counts that include the other accounts' logs. If the key is an attribute, the default merge strategy replaces the differing values with a wildcard, so no filter matches and the summary reaches no account.
+
+### Should I create a pipeline for each account or filter the sinks of one pipeline?
+
+Create a pipeline for each group when the groups need different reduction settings or different exceptions, or when you want them isolated. Filter the sinks of one pipeline when the groups share one reduction policy and you would rather keep a single pipeline to change.
+
+### What happens to logs that have no value for the routing key?
+
+They match no sink's filter and reach no vendor account. Give them a default value when you parse the routing key, or add a sink whose filter matches them so they land somewhere you can see.
+
+### Does a sink filter apply to summarized logs as well as raw ones?
+
+Yes. The filter runs on everything the reducer emits, so summaries, samples, passthrough messages, and exceptions all follow the same routing.

package/build/dist/docs-index/dd21ef13-a2a0-44d4-b868-9bc159ca61cc.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/de4ad52a-3de7-47a1-ab3e-9a354503bf4b.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/dec7d942-c1b9-4a1c-93df-61d5ff70cb84.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/dfcafa71-0458-43e0-835c-e5dabc19c6b1.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/e1774e1c-df69-4ddc-86bb-1bac9a4ad848.txt

@@ -0,0 +1,55 @@
+# Datadog
+
+The payload containing integration data.
+
+**Type**: `object`
+
+## Properties
+
+- name: additionalTags (required)
+  type: array of string
+  description: Tags to add when writing data to Datadog
+
+- name: apiKey (optional)
+  type: string
+  description: Masked API key for Datadog
+
+- name: apiKeys (optional)
+  type: array of `IngestKeyView`
+  description: The API keys configured for this integration (masked).
+
+- name: appKey (optional)
+  type: string
+  description: Masked App key for Datadog
+
+- name: clientToken (optional)
+  type: string
+  description: Client token for Datadog
+
+- name: dashboardFreshnessWindow (optional)
+  type: string
+  description: The active dashboard threshold: only dashboards viewed within it are imported as parsed queries. When unset, every dashboard is imported. Minimum one day.
+
+- name: exceptions (optional)
+  type: object
+  description: The imported exceptions from Datadog. This is a map from the vendor resource Id to the exception.
+
+- name: filterQuery (required)
+  type: string
+  description: Filter to apply when reading any data from the Datadog API
+
+- name: includeNeverViewedDashboards (optional)
+  type: boolean
+  description: When the active dashboard threshold is set, whether dashboards that were never viewed are still imported. Unset means they are.
+
+- name: sendKeyId (optional)
+  type: string
+  description: Identifier of the API key used to send data back to Datadog. Defaults to the only key when unset.
+
+- name: site (required)
+  type: string
+  description: Datadog site URL
+
+- name: validateKeysOnSave (optional)
+  type: boolean
+  description: Indicates whether to validate the API and App keys when saving the keys.

package/build/dist/docs-index/e1d8512c-ef3d-48de-96da-e20cb919c820.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/e34ee92a-f204-44a6-95c5-1fca908f5ce5.txt

@@ -0,0 +1,37 @@
+# Resume a stopped vendor estimation run
+
+**POST** `/v1/integrations/{integrationId}/exceptions/vendor-estimation-runs/{runId}/resume`
+
+**Operation ID**: `resumeVendorEstimationRun`
+**Summary**: Resume a stopped vendor estimation run
+Makes a stopped run active again; counting continues where it stopped. Returns 409 for a run that is not stopped, or when the organization has the most runs allowed in progress.
+
+## Tags
+- Integration Exceptions
+## Parameters
+
+- **integrationId** (required) - path
+  - Integration id
+  - Type: string
+- **runId** (required) - path
+  - Run id
+  - Type: string
+
+## Responses
+
+### 200
+
+Run resumed
+
+- **Content-Type**: `application/json` / `VendorEstimationRun`
+### 401
+
+Unauthorized
+
+### 404
+
+Not Found - Integration or run not found.
+
+### 409
+
+Conflict - The run cannot be resumed now.

package/build/dist/docs-index/e7383d57-3bb2-4198-b5c4-e947caa1a414.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/e8c47c25-56b1-4efc-8260-748fe3b0c85a.txt

@@ -0,0 +1,34 @@
+# Import an integration's parsed queries now
+
+**POST** `/v1/integrations/{integrationId}/parsed-queries/import`
+
+**Operation ID**: `importParsedQueries`
+**Summary**: Import an integration's parsed queries now
+Reads the integration's alert, monitor and dashboard queries from its vendor without waiting for the hourly import. One fetch is shared by every integration in the organization using the same vendor account, so this updates all of them. If an import is already under way this joins it rather than starting another. The import runs in the background; its result appears in the integration's activity log.
+
+## Tags
+- Integrations
+## Parameters
+
+- **integrationId** (required) - path
+  - Integration id
+  - Type: string
+
+## Responses
+
+### 200
+
+Import started, or already under way
+
+- **Content-Type**: `application/json` / `ParsedQueryImportStatus`
+### 401
+
+Unauthorized
+
+### 404
+
+Not Found - Integration not found.
+
+### 409
+
+Conflict - This vendor has no parsed queries to import, or the integration has no application key saved.

package/build/dist/docs-index/f00e23c4-264a-4e33-bb09-465902059e36.txt

@@ -0,0 +1,15 @@
+# ExceptionImpact
+
+Estimated passthrough for one parsed alert query against one dataset
+
+**Type**: `object`
+
+## Properties
+
+- name: measuredAt (optional)
+  type: string
+  description: When the estimation run that produced this percentage completed. Absent when the age of the measurement is not known; that is not the same as freshly measured.
+
+- name: percentage (required)
+  type: number
+  description: Estimated percentage of the dataset's raw log volume this query matches. Honouring the query as a pipeline exception passes approximately this share of the data through without aggregation.

package/build/dist/docs-index/f1b413fd-9278-4237-9317-ab2458efba92.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/f477d431-adc5-4e6b-81fc-c7f236dcbd82.json

@@ -0,0 +1 @@
+{"docType":"doc"}

package/build/dist/docs-index/f477d431-adc5-4e6b-81fc-c7f236dcbd82.txt

@@ -0,0 +1,168 @@
+Turn on Grepr AI agent memory so an agent records what it concluded, counts recurrences, and searches past investigations during a new one.
+
+# Remember past investigations
+
+Without memory, every investigation starts from nothing. An agent that diagnosed a problem last week reaches the same conclusion the same slow way this week, and nobody learns that the problem has now happened five times.
+
+*Memory* changes that. An agent with memory enabled records what it concluded when it reaches a diagnosis, recognizes when a later investigation reaches the same conclusion and counts the recurrence, and searches those records at the start of a new investigation to find out whether it has seen this before.
+
+Both halves show up in the investigation's tool calls. A memory search runs near the start, before the agent has looked at anything else, and the record is written at the end, when it has a diagnosis.
+
+The agent decides what to record and whether something is a recurrence. Grepr does not extract conclusions on its behalf or merge records by similarity, because the investigating agent is the only thing that saw the evidence.
+
+Memory is off until you turn it on and choose where the memories are stored.
+
+## What an agent records \[#what-recorded]
+
+An agent records at most one memory per investigation, written when it reaches a diagnosis rather than after the fact. Each memory holds:
+
+| Field | What it holds |
+| --- | --- |
+| Title | A short name for the problem. |
+| Symptoms | What was observed. |
+| Root cause | What the agent concluded was responsible. |
+| Root cause confidence | Whether the cause is **confirmed**, **suspected**, or **unknown**. |
+| Ruled out | Causes the agent checked and eliminated, so a later investigation does not repeat that work. |
+| Resolution | What resolved it, or what was attempted. |
+| Significance | How much the conclusion matters. See [Significance](#classification). |
+| Entity tags | The services, pipelines, and environments the memory is about. See [Entity tags](#tagging). |
+| Recurrence count | How many investigations reached this same conclusion. |
+
+An agent can correct its own memory for an investigation while that investigation is running, so an early diagnosis it later disproves does not stay on the record. Correcting a memory does not count as a new recurrence.
+
+### Significance \[#classification]
+
+Significance is how an agent classifies what it found, and it decides how the memory can be found later:
+
+| Significance | Meaning |
+| --- | --- |
+| Incident | A real problem was identified. |
+| Observation | Not a problem, but a conclusion worth keeping. |
+| Inconclusive | The agent could not determine whether there was a problem. |
+| Benign | Triaged as no problem. |
+
+Benign memories are recorded but not indexed for search by meaning or by text. They are reachable only by a timeline search over their entity tags. This keeps the large number of routine all-clear findings out of the way of searches for real problems, at the cost of making them harder to find. If you want an agent to notice that a given service has been triaged as benign many times, search the timeline for that service rather than searching by text.
+
+## Turn on memory \[#enable]
+
+Memory needs somewhere to store its search index and a model to build that index with, so there are three things to set up.
+
+### Step 1: Create a vector index integration \[#vector-index]
+
+1. On the **Integrations** page, next to the **S3 Vector Index** section heading, click **Add new**.
+2. In the **Add Vector Index** dialog, enter a **Name** and the number of **Dimensions** the embedding model you plan to use produces, then click **Create**.
+
+The dimensions must match the model's output, so choose the embedding model first and use its dimension count. An index's dimensions are fixed after creation.
+
+### Step 2: Create an embedding integration \[#embedding-integration]
+
+Memory embeds each record with a model from an LLM integration that provides embeddings. If you do not have one, create it before you continue. See [_](/integrations/llm).
+
+An agent's reasoning model and its embedding model are separate choices. An agent can reason with one integration and embed with another.
+
+### Step 3: Turn on memory for the agent \[#agent-memory]
+
+1. On the agent's page, go to the **Memory** step.
+2. Turn on **Remember past investigations**.
+3. Under **Storage**, select the **Vector index integration**, the **Embedding credentials**, and the **Embedding model**.
+4. Save the agent.
+
+Grepr creates the search index when you create the vector index integration in Step 1, and discards the integration if the index cannot be created. Saving the agent then checks that the embedding model actually works against that index, by embedding a test value with it. So a wrong model or an unusable credential stops the save rather than surfacing later as memories that were never indexed.
+
+### Choose an embedding model and keep it \[#embedding-model]
+
+A memory is embedded with the model the agent had when it was recorded, and a query can only be compared against embeddings from the same model. Changing an agent's embedding model therefore cuts its new memories off from the ones it already recorded, as far as searching by meaning is concerned. Treat the choice as long lived.
+
+Using the same model across several agents does not pool their memories into one semantic search. A search by meaning always targets one agent, as described next.
+
+## How an agent searches its memory \[#search-modes]
+
+A search runs in exactly one of three modes, and which mode fits depends on what the agent is trying to find:
+
+| Mode | What it finds | Use it to answer |
+| --- | --- | --- |
+| Semantic | Investigations whose conclusions mean something similar to the query. | Has a problem like this happened before? |
+| Text | Investigations mentioning specific words, using full-text search. | Has this exact error string or identifier come up before? |
+| Timeline | Investigations about given entities, ordered by time. | What has been happening to this service recently? |
+
+Semantic search finds a past incident described in different words, which text search misses. Text search finds a literal, such as an error code or a host name, which semantic search can rank poorly. Timeline search needs entity tags rather than a query, and it is the only mode that returns benign memories.
+
+The modes also differ in how much they cover, which matters when you read an empty result:
+
+* A semantic search covers one agent at a time, because a query is only comparable against embeddings made with that agent's model. An empty semantic result means nothing similar was found within what the search could reach. It is not evidence that the agent recorded nothing similar, and it is not evidence that your organization has not seen the problem. A memory embedded with a model the agent no longer uses is unreachable until it is embedded again, and a search that cannot reach the embedding provider returns empty as well. When an empty result matters, confirm it with a text or timeline search, which read the records directly.
+* A text or timeline search covers every agent in your organization by default, so it is the one to use when you want the organization's whole history.
+
+So to find out whether any agent has seen something, search by text or timeline, or repeat the semantic search against each agent you care about.
+
+A result carries the memory's content along with its recurrence count, how long ago it was recorded, when it was last seen, and whether it is active, recent, or historical. There is no relevance score, because the agent judges from the content and the provenance rather than a ranking number.
+
+Search returns at most 50 results and has no pagination, so a broad query can be incomplete. Narrowing by entity tags or by significance is more effective than raising the limit.
+
+## Entity tags \[#tagging]
+
+Entity tags are what make memories findable by the thing they are about, such as a service, a pipeline, or an environment. Each memory carries two kinds:
+
+* Tags Grepr derives from the triggering signal, which identify the source and the signal type.
+* Tags the agent adds, which name the entities it concluded the memory is about.
+
+Grepr derives its tags using a mapping per signal type, which extracts values from the signal payload by path. The shipped mappings cover the common cases:
+
+| Signal type | Tags derived from the signal |
+| --- | --- |
+| Log pattern | The pipeline, the pattern, and the service, environment, and Kubernetes namespace from the sample log event. |
+| Webhook | The integration, and the service and host from the payload. |
+| Manual | The signal type only. |
+
+The webhook mapping reads the service and host from field names Grepr expects. If your payloads name those fields differently, add a mapping so the tags resolve. On the agent's **Memory** step, under **Entity tags**, add a mapping for the signal type, then add each tag key with the paths to read it from. Grepr tries the paths in order and uses the first that resolves.
+
+Consistent tag values matter more than complete ones. A service tagged `checkout` in some memories and `checkout-svc` in others splits its history in two, and a timeline search finds only half. Grepr gives an agent the tag values already in use in your organization when it searches, so an agent that searches before recording reuses existing values rather than inventing new ones.
+
+## Who can read and write memories \[#scope]
+
+* Reads are organization-wide. Any agent can search any other agent's memories in your organization. Operational history is only useful shared, so an agent investigating a service finds what another agent concluded about the same service. Permission is uniform across the modes, but coverage is not: a semantic search still examines one agent at a time. See [How an agent searches its memory](#search-modes).
+* Writes are owner-only. A memory can be written or corrected only by the agent that ran the investigation, so one agent cannot overwrite another's conclusions.
+
+When an agent finds that a past memory describes what it is now seeing, it links its investigation to that memory, which raises the recurrence count rather than creating a near-duplicate record. Each contributing investigation counts once.
+
+Memories outlive the agent that wrote them. Deleting an agent leaves its memories searchable by your other agents.
+
+## Search memories from the CLI \[#cli]
+
+The Grepr CLI searches the same memories an agent does, which is how you read what your agents have concluded.
+
+```bash
+# Find investigations mentioning a literal string
+grepr investigation:memory:search --mode text --query "connection refused" --limit 5
+
+# Find investigations whose conclusions are similar in meaning
+grepr investigation:memory:search --mode semantic --agent-id <agent-id> --query "intermittent ingestion failures"
+
+# See what has been happening to one service lately
+grepr investigation:memory:search --mode timeline --entity-tag entity:service=checkout
+```
+
+A semantic search needs an agent id, because a query can only be compared inside the index that agent embeds into. Text and timeline searches cover every agent in your organization by default. Timeline searches need at least one entity tag.
+
+The CLI is how you read what your agents have concluded outside of an investigation. To learn more about the CLI, see [_](/cli).
+
+## Frequently Asked Questions
+
+### What does Grepr AI agent memory store?
+
+One memory per investigation, holding a title, the symptoms, the root cause and the agent's confidence in it, the causes it ruled out, the resolution, a significance classification, entity tags, and a count of how many investigations reached the same conclusion.
+
+### What do I need to turn on agent memory?
+
+Three things: a vector index integration whose dimensions match your embedding model, an LLM integration that supplies the embedding model, and the embedding model name. Grepr creates the search index when you create the vector index integration. Saving the agent then checks that the embedding model works against that index, so a wrong model stops the save.
+
+### How does an agent search its memory?
+
+In one of three modes. Semantic search finds conclusions that mean something similar to the query, and covers one agent at a time. Text search finds specific words, such as an error code. Timeline search finds memories about given entities ordered by time, and is the only mode that returns benign memories. Text and timeline searches cover every agent in the organization by default.
+
+### Can one Grepr AI agent read another agent's memories?
+
+Yes, permission is organization-wide, so any agent can search any other agent's memories in your organization. Coverage differs by mode: text and timeline searches span every agent by default, while a search by meaning targets one agent at a time, because a query is only comparable against embeddings made with that agent's model. Writes are owner-only.
+
+### How do I read what my agents have remembered?
+
+Search them with the grepr investigation:memory:search command, choosing text, semantic, or timeline mode, or read them in an investigation that searched them. The Memory step of an agent holds the settings rather than the records.

package/build/dist/docs-index/f58982fd-6989-41a0-b04f-7809c246de83.json

@@ -0,0 +1 @@
+{"docType":"doc"}