@grepr/cli 1.11.5-a603268 → 1.11.5-b97c32b

package/build/dist/docs-index/87afd119-c173-46e8-b11d-f4d9bc01df6c.txt

@@ -0,0 +1,171 @@
+Start, follow, and read Grepr AI agent investigations, guide a running one, understand each state, and review the pipeline changes an agent proposes.
+
+# Run and review investigations
+
+An *investigation* is one run of an agent. It holds the signals that triggered it, every turn the agent took, every tool it called, the changes it made outside the sandbox that Grepr recognizes, and the summary it finished with. Investigations are listed on the agent's **Investigations** step.
+
+An investigation is a record, not a conversation. You can interrupt one to add guidance, but most investigations run to completion unattended and you read them afterwards.
+
+## Start an investigation manually \[#start-manual]
+
+Start one manually to try out an agent before subscribing it to anything, or to point an agent at something you already know about.
+
+1. On the agent's page, click **Run investigation**.
+2. Optionally enter **Context**, which is what the agent starts from, such as the service to look at or the symptom you saw.
+3. Click **Start investigation**.
+
+Context is the only instruction an investigation started manually receives beyond the agent's system prompt, so include the service, the time range, and the symptom. An investigation with no context relies entirely on the agent's prompt to decide what to examine.
+
+An investigation you start manually is not subject to the maximum queue wait, but it is subject to the concurrency limit and the token budgets. When a budget is exhausted, a manual investigation is discarded rather than queued, so you find out immediately instead of waiting. See [_](/ai-agents/create-an-agent#limits).
+
+## Investigation states \[#states]
+
+| State | What it means | What you can do |
+| --- | --- | --- |
+| Queued | Accepted and waiting for a free slot on the agent. No sandbox exists yet. | Cancel it. |
+| Running | The agent is working. | Stop it or cancel it. |
+| Stopping | A stop was requested and is being applied. | Cancel it. |
+| Cancelling | A cancel was requested and is being applied. | Wait for it to finish. |
+| Stopped | Either paused and waiting for instruction, or ended after waiting too long. | Resume a paused one, or continue a finished one in a new investigation. |
+| Completed | The agent finished and wrote a summary. | Continue it in a new investigation. |
+| Failed | The investigation ended with an error. | Read the reason, then continue it in a new investigation. |
+| Cancelled | You cancelled it. | Continue it in a new investigation. |
+| Discarded | Recorded but never ran. | Read why, then address the cause. |
+
+Stopped covers two situations, and the status icon tells them apart. A stopped investigation that is still waiting for instruction is paused and can be resumed, carrying on from where it left off while its sandbox is still there. If the sandbox is lost while the investigation is paused, the resumed agent restarts from the triggering signals and whatever you resume it with, so give it what it needs rather than assuming it still remembers. One that waited too long without instruction has ended, and the work it did is readable but no longer resumable. So resume a stopped investigation while you still want its context, rather than leaving it paused indefinitely.
+
+Completed, Failed, Cancelled, Discarded, and a timed-out Stopped are final. Nothing restarts them, though you can start a fresh investigation seeded with what one learned. See [Continue in a new investigation](#continue).
+
+## Read an investigation \[#read]
+
+Open an investigation from the agent's **Investigations** step. It reads top to bottom: what the agent concluded, what set it off, then how it got there.
+
+### The summary \[#summary]
+
+A finished investigation opens with the agent's own account of what it found. An investigation that failed or was discarded carries the reason it ended instead of a conclusion, which is the first thing to read when a run did not work.
+
+The summary is what the agent wrote for you to read, so it is the part to read when you want the conclusion. Read the timeline when you want to check the conclusion.
+
+### The triggering signal \[#trigger]
+
+The triggering signal is the event that started the run. A webhook signal shows the payload the sending system posted. A log pattern signal shows the pattern the reducer detected and a sample log line that matched it. An investigation you started manually shows the context you typed.
+
+Read the signal when a conclusion surprises you. An agent reasoning from a payload whose fields it cannot interpret often produces a plausible but wrong summary, and the fix is usually the integration's schema description rather than the agent's prompt. See [_](/integrations/grepr-agent-webhooks#schema-description).
+
+### The timeline \[#timeline]
+
+The timeline is every step in order: what the agent was told, what it said, each tool it called with the arguments it passed, and what each tool returned. Tool output is collapsed, so you can scan the shape of a run and expand only the calls that matter. Each call reports how long it took.
+
+Read the timeline to answer why an agent concluded what it did. Two patterns are worth recognizing:
+
+* Repeated similar tool calls usually mean the agent is missing a capability or some knowledge, and is working around the gap. Consider enabling a skill that covers the task or using a better model.
+* A run that ends without a conclusion usually means it reached its turn or token limit. The last turn shows where it was.
+
+### Recorded actions \[#actions]
+
+An *action* is a consequential change the agent made outside its own sandbox: a pipeline version it applied, a pipeline change it proposed for review, or a write it made through a connected MCP integration. Reads are not actions, and neither is everything an agent can do from a shell, so treat the count as a record of the changes Grepr recognizes rather than a complete audit. Actions appear beneath the tool call that made them and are counted in the **Actions** column of the list, so you can find the investigations that changed something without reading any transcripts.
+
+Actions record successful changes, not attempts. A tool call that failed appears in the timeline but produces no action.
+
+## Guide a running investigation \[#guide]
+
+### Stop and resume \[#stop-resume]
+
+Stopping ends the agent's session and pauses the investigation. Work already in flight is abandoned rather than finished, so a tool call that was running might not complete. Everything the investigation had recorded up to that point is kept, which is what a resume continues from.
+
+To continue it, click **Resume**. You can add a message to steer it, such as naming the service it should focus on, or resume with no message to let it carry on. Stop and resume when an agent is heading the wrong way but its work so far is worth keeping.
+
+### Cancel \[#end-for-good]
+
+Cancelling ends an investigation for good. Use it when the run is not worth finishing. The transcript remains readable.
+
+To cancel several at once, select them in the list and cancel the selection. This is how you clear a backlog that built up, such as from a misconfigured source. Cancelling is permanent, and an investigation that has already finished is left alone.
+
+### Continue in a new investigation \[#continue]
+
+A finished investigation cannot be resumed, but you can start a new one seeded from it. The new investigation begins with the earlier conversation, and you can add a message to direct it, such as asking it to verify that a change worked.
+
+The seed carries what the agent and you said to each other, not the tool calls it made or the results they returned, and a long conversation is trimmed to its most recent part. Put anything the new investigation must not lose into the message you start it with.
+
+Use this to carry an investigation forward after you have acted on it, rather than starting from nothing and paying for the same discovery twice.
+
+## Find investigations \[#find]
+
+The list holds one row per investigation, with its identifier, what triggered it, its summary, when it was created, how long it ran and how long it waited in the queue, its state, and how many actions it recorded.
+
+Three filters narrow it:
+
+* **Status** limits the list to the states you select.
+* **Actions** separates investigations that recorded a change from those that did not.
+* **Trigger** limits the list to investigations started manually, by a webhook, or by a log pattern.
+
+Filter on recorded actions when you want to review what an agent has changed, and on failed status when you are diagnosing an agent that is not working.
+
+## Why an investigation was discarded \[#discarded]
+
+A discarded investigation was recorded but never ran. There are three reasons, and each has a different fix:
+
+| Reason | What to do |
+| --- | --- |
+| The agent was at its concurrency limit and set to discard extra signals. | Raise the concurrency limit, switch to queueing, or reduce what the source emits. |
+| A queued investigation waited longer than the maximum queue wait. | Raise or remove the maximum queue wait, or raise the concurrency limit so the queue drains faster. |
+| A token budget was exhausted. | Raise the budget that blocked it, or wait for the window to reset. Check which budget it was on the agent's page. |
+
+A rise in discarded investigations usually means a source is emitting more than the agent can handle. Reducing what the source emits keeps the signal you want, whereas raising the limits keeps the volume and increases the cost. See [_](/ai-agents/subscriptions#volume).
+
+## Review the pipeline changes an agent proposes \[#suggestions]
+
+An agent set to require human approval records each pipeline change it proposes as a *suggestion* on that pipeline, and changes nothing until you apply it. Suggestions are on the pipeline's **Suggestions** step, not on the agent, because the decision is about the pipeline.
+
+Each suggestion lists when it was proposed, what it changes, and the investigation that produced it. To decide, review the proposed change as a difference against the pipeline's configuration, and read the investigation that produced it to see the evidence the agent based it on.
+
+Then either apply it or reject it:
+
+* Applying re-verifies the change against the pipeline's configuration as it is now, not as it was when the agent proposed it, and a running pipeline then restarts to pick it up. A suggestion whose assumptions no longer hold is refused rather than applied blindly, and it stays pending, so you can retry it after the pipeline settles.
+* Rejecting leaves the pipeline untouched and closes the suggestion.
+
+Reviewing a suggestion changes nothing on the live pipeline, so read as many as you like before deciding. Suggestions do not expire, but an old one is more likely to be refused on apply, because the pipeline's configuration has likely drifted. Review them while they still match the pipeline.
+
+To let an agent apply its own changes instead, see [_](/ai-agents/capabilities#change-approval).
+
+## Read investigations from the CLI \[#cli]
+
+The Grepr CLI reads investigations, which is useful for auditing many runs at once or feeding them into your own tooling.
+
+```bash
+# List an agent's failed investigations
+grepr investigation:list --agent-id <agent-id> --status FAILED --page-size 10
+
+# Read one investigation's metadata, summary, and recorded actions
+grepr investigation:get <investigation-id>
+
+# Read the turns, including tool calls and their results
+grepr investigation:turns <investigation-id> --page-size 10
+
+# Export a transcript to a file
+grepr investigation:transcript <investigation-id> --all --output investigation.json
+```
+
+To follow a running investigation as it progresses, add `--follow` to `investigation:turns`. To learn more about the CLI, see [_](/cli).
+
+## Frequently Asked Questions
+
+### How do I start a Grepr AI agent investigation manually?
+
+On the agent's page, click Run investigation, optionally enter the context the agent should start from, and click Start investigation. Context is the only instruction beyond the agent's system prompt, so include the service, the time range, and the symptom.
+
+### What does a stopped investigation mean in Grepr?
+
+Stopped covers two situations. An investigation that is still waiting for instruction is paused and can be resumed, carrying on from where it left off while its sandbox is still there. If the sandbox is lost while it is paused, the resumed agent restarts from the triggering signals and the message you resume it with. One that waited too long without instruction has ended, and remains readable but is no longer resumable. The status icon tells the two apart.
+
+### Can I resume a completed Grepr AI agent investigation?
+
+No. Completed, failed, cancelled, discarded, and timed-out stopped investigations are final. You can start a new investigation seeded from the finished one, and add a message to direct it, such as asking it to verify that a change worked.
+
+### Why was my investigation discarded?
+
+There are three reasons: the agent was at its concurrency limit and set to discard extra signals, a queued investigation waited longer than the maximum queue wait, or a token budget was exhausted. The agent's page reports which token budget blocked it and when the window resets.
+
+### How do I review a pipeline change proposed by a Grepr AI agent?
+
+Suggestions appear on the pipeline's Suggestions step. Review the proposed change as a difference against the current configuration and read the investigation that produced it, then apply or reject it. Applying re-verifies the change against the pipeline as it is now, and a running pipeline restarts to pick it up. A suggestion that no longer verifies is refused and stays pending, leaving the pipeline untouched.

package/build/dist/docs-index/89a56592-df39-4bd6-bf0f-0148d81eaede.txt

@@ -0,0 +1,33 @@
+# Get parsed alert query impacts for an integration and dataset
+
+**GET** `/v1/integrations/{integrationId}/exceptions/impacts`
+
+**Operation ID**: `getIntegrationExceptionImpactsByDataset`
+**Summary**: Get parsed alert query impacts for an integration and dataset
+Returns the estimated percentage of the dataset's raw log volume each of the integration's parsed alert queries matches, with the time that estimate was measured. Queries that have not been estimated are absent from the response rather than reported as zero. The dataset must be one of those returned by the estimation-datasets endpoint for this integration.
+
+## Tags
+- Integration Exceptions
+## Parameters
+
+- **integrationId** (required) - path
+  - Integration id
+  - Type: string
+- **datasetId** (required) - query
+  - Dataset the estimates are scoped to
+  - Type: string
+
+## Responses
+
+### 200
+
+Impact estimates retrieved
+
+- **Content-Type**: `application/json` / object
+### 401
+
+Unauthorized
+
+### 404
+
+Not Found - Integration not found, or the dataset is not reachable from it.

package/build/dist/docs-index/8e991225-4708-416f-93ff-2b1cb4ec2789.txt

@@ -0,0 +1,51 @@
+# Submit a webhook event
+
+**POST** `/v1/integrations/webhooks/{id}/events`
+
+**Operation ID**: `postEvent`
+**Summary**: Submit a webhook event
+Accepts one JSON event from the sending system and starts an investigation on each target agent of the integration. The org is taken from the Grepr API key and the integration id from the path. Returns 202 with the started investigation ids. Retries after a 5xx may start duplicate investigations.
+
+## Tags
+- Webhook Events
+## Parameters
+
+- **id** (required) - path
+  - The webhook integration id.
+  - Type: string
+
+## Request Body
+
+**Content-Type**: `application/json`
+
+**Schema**: string
+
+## Responses
+
+### 202
+
+Investigation(s) started
+
+### 400
+
+Body is not valid JSON
+
+### 401
+
+API key is invalid
+
+### 404
+
+No such webhook integration
+
+### 409
+
+The integration has no live target agent to start
+
+### 413
+
+Body exceeds the size limit
+
+### 503
+
+At least one target agent could not be started for a transient reason; retry

package/build/dist/docs-index/8fa8de5a-e831-48d3-ae73-b5e32aaf51b2.txt

@@ -0,0 +1,20 @@
+# Get the current maxTokens window of one LLM integration
+
+**GET** `/v1/llm-usage/{integrationId}`
+
+**Operation ID**: `currentWindow`
+**Summary**: Get the current maxTokens window of one LLM integration
+## Tags
+- LLM Usage
+## Parameters
+
+- **integrationId** (required) - path
+  - Type: string
+
+## Responses
+
+### 200
+
+Current window retrieved
+
+- **Content-Type**: `application/json` / `LlmUsageWindow`

package/build/dist/docs-index/8fbdf1e1-02cf-4e55-8a64-87ba02e5748d.txt

@@ -0,0 +1,19 @@
+Learn how to create, run, and manage Grepr pipelines that process your telemetry data to improve value and reduce size before sending it to your observability platform.
+
+# Process your telemetry data with Grepr pipelines
+
+Grepr pipelines orchestrate data processing flows that ingest your telemetry data, such as logs and Application Performance Monitoring (APM) data produced by agents and collectors, transform and enrich the data, and deliver the resulting data to your observability platform.
+
+An example of a pipeline is a log or trace reduction pipeline that reduces the volume of duplicate, low-value events by creating summarized events that retain the context of the original events.
+
+## Trace reduction pipelines
+
+Trace reduction pipelines process the APM data produced by your applications and agents by applying configured transformations, sampling to create representative subsets of the data, and forwarding the results to your observability platform. Grepr uses a novel approach to identify and sample every path through your system. Sampling reduces the volume and cost of data sent to your observability platform, while the complete set of raw traces is retained in a Grepr data lake. If you use Datadog, you can also derive and forward metrics from your trace data to track trends across your traces without forwarding every trace. See [_](/pipelines/trace-pipelines).
+
+## AI agent signals and suggestions
+
+A log reduction pipeline can report each newly detected log pattern to your Grepr AI agents, so an agent investigates behavior that is new in your systems. An agent can also propose a change to the pipeline it investigated, such as a new Grok parser or an added SQL transform, which appears on the pipeline's **Suggestions** step for you to review and apply. To turn on signals, see [_](/transforms/reducer/configuration#agent-signals). To review a proposed change, see [_](/ai-agents/investigations#suggestions).
+
+## Agent sessions pipelines
+
+Agent sessions pipelines process the telemetry produced by coding agents such as Claude Code, Codex, and OpenCode. A coding agent reports its conversation as OpenTelemetry log events and its execution as OpenTelemetry spans, and neither signal is readable as a session on its own. An agent sessions pipeline reads both signals, reconstructs each run into a single session, and stores it in a Grepr data lake, so you can read the transcript, measure the tokens and cost the run consumed, and find the runs that failed. See [_](/pipelines/agent-sessions).

package/build/dist/docs-index/9233c922-9071-42f9-b9f1-1ac942b21ab8.txt

@@ -0,0 +1,103 @@
+Learn what Grepr AI agents are, how they investigate your telemetry, and what to configure before you create one.
+
+# Grepr AI agents
+
+A Grepr *AI agent* is a configured investigator that Grepr runs for you. You give it instructions, a model to reason with, an identity to act as, and a set of capabilities. It then runs *investigations*: in each one the agent works in an isolated sandbox, uses the capabilities you granted to examine your logs, pipelines, and connected systems, records the changes it made outside the sandbox that Grepr recognizes, and writes up what it found.
+
+You decide when an agent runs. Start an investigation yourself and give it the context to work from, or connect the agent to a source so it investigates on its own whenever that source reports something. When an investigation finishes, you can carry it forward into a new one that starts from the earlier conversation.
+
+An agent is not a chat assistant. It runs unattended and finishes with a written conclusion you read afterwards. If it concludes that a pipeline should change, what happens next depends on the agent's change approval mode: it either records the change as a suggestion for you to review, or applies it directly.
+
+> AI agents are enabled for each organization individually. To turn on AI agents for your organization, contact <support@grepr.ai>.
+
+## What an agent can do \[#capabilities-summary]
+
+Every agent works inside its own sandbox, where it can always run shell commands, Python, and DuckDB, and read and write its own files. What it can reach beyond that sandbox is entirely what you grant it:
+
+* Search the logs and spans in your data lake.
+* Read the configuration of your pipelines, datasets, templates, and integrations.
+* Propose and apply changes to a pipeline's Grok parsers and SQL transforms.
+* Call the tools published by an MCP server you connect.
+* Read its own past investigations and the conclusions it recorded from them.
+
+An agent acts as a Grepr service account that you choose. The roles on that service account cap what the agent can reach, whatever tools you enable, so the service account is the outer boundary and the tool grants narrow it further. To learn more, see [_](/ai-agents/capabilities).
+
+## The parts of an AI agent \[#parts]
+
+| Part | What it is |
+| --- | --- |
+| Agent | The configuration you create: a name, instructions, a model, a service account, the tools and skills it can use, and its limits. |
+| Signal source | A pipeline that detects new log patterns, or a Grepr Agent integration that receives events from another system. |
+| Subscription | The link between an agent and a signal source. A signal from that source starts an investigation on that agent. |
+| Investigation | One run of an agent, with its transcript, the actions it took, and its summary. |
+| Memory | What an agent recorded from past investigations, and can search during a new one. |
+| Skill | A directory of instructions an agent loads when it needs them. A skill can also grant tools. |
+| Suggestion | A pipeline change an agent proposed and is waiting for you to review. |
+
+## How an investigation runs \[#investigation-loop]
+
+1. An investigation is queued, either because you started one and gave it context, or because a source the agent is connected to reported something. If the agent is already running as many investigations as you allow, the new one waits or is dropped, depending on the agent's queueing setting.
+2. The agent starts in a fresh sandbox, reads its instructions and whatever it was given to start from, and searches its memory for investigations that reached a similar conclusion.
+3. The agent works through as many turns as you allow, calling the tools you granted. Grepr records each turn, each tool call, and each change it recognizes the agent making outside the sandbox.
+4. The agent writes a summary and, when it has one, records a conclusion in its memory. If it wants to change a pipeline, it submits the change as a suggestion, or applies it directly when you configured the agent to do so.
+
+An investigation ends on its own, or you can stop it to add guidance and resume it, cancel it outright, or continue it in a fresh investigation seeded from it. To learn more, see [_](/ai-agents/investigations).
+
+## What you need before you start \[#requirements]
+
+Before you create your first agent, you need:
+
+* An LLM integration that provides the model the agent reasons with. See [_](/integrations/llm).
+* A Grepr service account for the agent to act as. See [_](/admin/service-accounts).
+
+That is enough to create an agent and run investigations yourself. Three further capabilities each need their own setup:
+
+* To have an agent investigate on its own, connect it to a signal source, which is either a pipeline or a Grepr Agent integration. See [_](/ai-agents/subscriptions).
+* To let an agent call an external system's tools, create an MCP integration. See [_](/integrations/mcp).
+* To let an agent keep and search conclusions from past investigations, create a vector index integration and an embedding integration. See [_](/ai-agents/memory).
+
+## Create an agent
+
+Create an agent in a six-step wizard that collects its instructions, its model, its capabilities, its memory settings, and its subscriptions. The same settings are editable afterwards on the agent's page. See [_](/ai-agents/create-an-agent).
+
+## Control what an agent can do
+
+An agent's reach is set by the service account it acts as, the tools you enable, the skills you give it, and the MCP servers you connect. This also covers whether the pipeline changes it proposes need your approval. See [_](/ai-agents/capabilities).
+
+## Extend agents with skills
+
+A skill is a directory of instructions that an agent loads only when it is relevant, and which can grant the tools it needs. Grepr ships a set of skills, and you can write your own. See [_](/ai-agents/skills).
+
+## Have an agent investigate on its own
+
+Connect an agent to a pipeline or a Grepr Agent integration so that source's events start investigations without you. See [_](/ai-agents/subscriptions).
+
+## Run and review investigations
+
+Start an investigation yourself, follow the ones a source triggered, read their transcripts, guide one that is running, and review the pipeline changes an agent proposes. See [_](/ai-agents/investigations).
+
+## Remember past investigations
+
+With memory turned on, an agent records what it concluded, counts how often the same conclusion recurs, and searches those records during later investigations. See [_](/ai-agents/memory).
+
+## Frequently Asked Questions
+
+### What is a Grepr AI agent?
+
+A Grepr AI agent is a configured investigator that runs unattended in an isolated sandbox. You give it instructions, a model, a service account identity, and a set of capabilities, then run investigations with it. You can start an investigation yourself, connect the agent to a source so it investigates on its own, or continue a finished investigation in a new one. In each investigation the agent examines your telemetry, records the actions it took, and writes a summary.
+
+### How is an AI agent different from an agent sessions pipeline?
+
+An AI agent investigates your telemetry and can change your pipelines. An agent sessions pipeline does the opposite: it ingests the OpenTelemetry data that coding agents such as Claude Code, Codex, and OpenCode produce, and reassembles it into readable sessions so you can review transcripts and measure token usage and cost.
+
+### How does a Grepr AI agent investigation start?
+
+You can start one yourself from the agent's page and give it the context to work from, or continue a finished investigation in a new one. An agent connected to a source also investigates on its own: a pipeline reducer detecting a log pattern it has not seen before, a SQL output in a pipeline routed to the agent signal, or an event received by a Grepr Agent webhook integration.
+
+### Can a Grepr AI agent change my pipelines without approval?
+
+Only if you configure it that way. An agent's change approval mode is either Require human approval, which records every proposed change as a suggestion for you to review and apply, or Auto-apply, which applies verified changes directly. Require human approval is the default.
+
+### What limits how many investigations an agent runs?
+
+You set the maximum number of concurrent investigations for each agent and whether additional signals queue or are discarded at that limit. You can also cap the tokens a single investigation can consume and the tokens the agent can consume per time window. The LLM integration the agent shares carries its own token budget as well.

package/build/dist/docs-index/9611b4ca-a136-4933-ac00-66ac216a4c15.txt

@@ -0,0 +1,19 @@
+# UsageStatus
+
+The outcome of the last attempt to read the integration's usage
+
+**Type**: `object`
+
+## Properties
+
+- name: collectedAt (optional)
+  type: string
+  description: When usage was last read successfully. The usage returned is as of this time; absent when it was never read.
+
+- name: detail (optional)
+  type: string
+  description: Why the last attempt failed, in words fit to show. Absent when it worked.
+
+- name: state (required)
+  type: enum: `OK`, `PENDING`, `PERMISSION_DENIED`, `NO_VIEWS`, `ERROR`
+  description: Whether the usage of the integration's parsed queries could be read