@grepr/cli 1.11.5-a603268 → 1.11.5-a7cb911

package/build/dist/docs-index/9e592c46-6615-4f64-9906-3120478b6bd0.txt

@@ -0,0 +1,171 @@
+Start, follow, and read Grepr AI agent investigations, guide a running one, understand each state, and review the pipeline changes an agent proposes.
+
+# Run and review investigations
+
+An *investigation* is one run of an agent. It holds the signals that triggered it, every turn the agent took, every tool it called, the changes it made outside the sandbox that Grepr recognizes, and the summary it finished with. Investigations are listed on the agent's **Investigations** step.
+
+An investigation is a record, not a conversation. You can interrupt one to add guidance, but most investigations run to completion unattended and you read them afterwards.
+
+## Start an investigation manually \[#start-manual]
+
+Start one manually to try out an agent before subscribing it to anything, or to point an agent at something you already know about.
+
+1. On the agent's page, click **Run investigation**.
+2. Optionally enter **Context**, which is what the agent starts from, such as the service to look at or the symptom you saw.
+3. Click **Start investigation**.
+
+Context is the only instruction an investigation started manually receives beyond the agent's system prompt, so include the service, the time range, and the symptom. An investigation with no context relies entirely on the agent's prompt to decide what to examine.
+
+An investigation you start manually is not subject to the maximum queue wait, but it is subject to the concurrency limit and the token budgets. When a budget is exhausted, a manual investigation is discarded rather than queued, so you find out immediately instead of waiting. See [_](/ai-agents/create-an-agent#limits).
+
+## Investigation states \[#states]
+
+| State | What it means | What you can do |
+| --- | --- | --- |
+| Queued | Accepted and waiting for a free slot on the agent. No sandbox exists yet. | Cancel it. |
+| Running | The agent is working. | Stop it or cancel it. |
+| Stopping | A stop was requested and is being applied. | Cancel it. |
+| Cancelling | A cancel was requested and is being applied. | Wait for it to finish. |
+| Stopped | Either paused and waiting for instruction, or ended after waiting too long. | Resume a paused one, or continue a finished one in a new investigation. |
+| Completed | The agent finished and wrote a summary. | Continue it in a new investigation. |
+| Failed | The investigation ended with an error. | Read the reason, then continue it in a new investigation. |
+| Cancelled | You cancelled it. | Continue it in a new investigation. |
+| Discarded | Recorded but never ran. | Read why, then address the cause. |
+
+Stopped covers two situations, and the status icon tells them apart. A stopped investigation that is still waiting for instruction is paused and can be resumed, carrying on from where it left off while its sandbox is still there. If the sandbox is lost while the investigation is paused, the resumed agent restarts from the triggering signals and whatever you resume it with, so give it what it needs rather than assuming it still remembers. One that waited too long without instruction has ended, and the work it did is readable but no longer resumable. So resume a stopped investigation while you still want its context, rather than leaving it paused indefinitely.
+
+Completed, Failed, Cancelled, Discarded, and a timed-out Stopped are final. Nothing restarts them, though you can start a fresh investigation seeded with what one learned. See [Continue in a new investigation](#continue).
+
+## Read an investigation \[#read]
+
+Open an investigation from the agent's **Investigations** step. It reads top to bottom: what the agent concluded, what set it off, then how it got there.
+
+### The summary \[#summary]
+
+A finished investigation opens with the agent's own account of what it found. An investigation that failed or was discarded carries the reason it ended instead of a conclusion, which is the first thing to read when a run did not work.
+
+The summary is what the agent wrote for you to read, so it is the part to read when you want the conclusion. Read the timeline when you want to check the conclusion.
+
+### The triggering signal \[#trigger]
+
+The triggering signal is the event that started the run. A webhook signal shows the payload the sending system posted. A log pattern signal shows the pattern the reducer detected and a sample log line that matched it. An investigation you started manually shows the context you typed.
+
+Read the signal when a conclusion surprises you. An agent reasoning from a payload whose fields it cannot interpret often produces a plausible but wrong summary, and the fix is usually the integration's schema description rather than the agent's prompt. See [_](/integrations/grepr-agent-webhooks#schema-description).
+
+### The timeline \[#timeline]
+
+The timeline is every step in order: what the agent was told, what it said, each tool it called with the arguments it passed, and what each tool returned. Tool output is collapsed, so you can scan the shape of a run and expand only the calls that matter. Each call reports how long it took.
+
+Read the timeline to answer why an agent concluded what it did. Two patterns are worth recognizing:
+
+* Repeated similar tool calls usually mean the agent is missing a capability or some knowledge, and is working around the gap. Consider enabling a skill that covers the task or using a better model.
+* A run that ends without a conclusion usually means it reached its turn or token limit. The last turn shows where it was.
+
+### Recorded actions \[#actions]
+
+An *action* is a consequential change the agent made outside its own sandbox: a pipeline version it applied, a pipeline change it proposed for review, or a write it made through a connected MCP integration. Reads are not actions, and neither is everything an agent can do from a shell, so treat the count as a record of the changes Grepr recognizes rather than a complete audit. Actions appear beneath the tool call that made them and are counted in the **Actions** column of the list, so you can find the investigations that changed something without reading any transcripts.
+
+Actions record successful changes, not attempts. A tool call that failed appears in the timeline but produces no action.
+
+## Guide a running investigation \[#guide]
+
+### Stop and resume \[#stop-resume]
+
+Stopping ends the agent's session and pauses the investigation. Work already in flight is abandoned rather than finished, so a tool call that was running might not complete. Everything the investigation had recorded up to that point is kept, which is what a resume continues from.
+
+To continue it, click **Resume**. You can add a message to steer it, such as naming the service it should focus on, or resume with no message to let it carry on. Stop and resume when an agent is heading the wrong way but its work so far is worth keeping.
+
+### Cancel \[#end-for-good]
+
+Cancelling ends an investigation for good. Use it when the run is not worth finishing. The transcript remains readable.
+
+To cancel several at once, select them in the list and cancel the selection. This is how you clear a backlog that built up, such as from a misconfigured source. Cancelling is permanent, and an investigation that has already finished is left alone.
+
+### Continue in a new investigation \[#continue]
+
+A finished investigation cannot be resumed, but you can start a new one seeded from it. The new investigation begins with the earlier conversation, and you can add a message to direct it, such as asking it to verify that a change worked.
+
+The seed carries what the agent and you said to each other, not the tool calls it made or the results they returned, and a long conversation is trimmed to its most recent part. Put anything the new investigation must not lose into the message you start it with.
+
+Use this to carry an investigation forward after you have acted on it, rather than starting from nothing and paying for the same discovery twice.
+
+## Find investigations \[#find]
+
+The list holds one row per investigation, with its identifier, what triggered it, its summary, when it was created, how long it ran and how long it waited in the queue, its state, and how many actions it recorded.
+
+Three filters narrow it:
+
+* **Status** limits the list to the states you select.
+* **Actions** separates investigations that recorded a change from those that did not.
+* **Trigger** limits the list to investigations started manually, by a webhook, or by a log pattern.
+
+Filter on recorded actions when you want to review what an agent has changed, and on failed status when you are diagnosing an agent that is not working.
+
+## Why an investigation was discarded \[#discarded]
+
+A discarded investigation was recorded but never ran. There are three reasons, and each has a different fix:
+
+| Reason | What to do |
+| --- | --- |
+| The agent was at its concurrency limit and set to discard extra signals. | Raise the concurrency limit, switch to queueing, or reduce what the source emits. |
+| A queued investigation waited longer than the maximum queue wait. | Raise or remove the maximum queue wait, or raise the concurrency limit so the queue drains faster. |
+| A token budget was exhausted. | Raise the budget that blocked it, or wait for the window to reset. Check which budget it was on the agent's page. |
+
+A rise in discarded investigations usually means a source is emitting more than the agent can handle. Reducing what the source emits keeps the signal you want, whereas raising the limits keeps the volume and increases the cost. See [_](/ai-agents/subscriptions#volume).
+
+## Review the pipeline changes an agent proposes \[#suggestions]
+
+An agent set to require human approval records each pipeline change it proposes as a *suggestion* on that pipeline, and changes nothing until you apply it. Suggestions are on the pipeline's **Suggestions** step, not on the agent, because the decision is about the pipeline.
+
+Each suggestion lists when it was proposed, what it changes, and the investigation that produced it. To decide, review the proposed change as a difference against the pipeline's configuration, and read the investigation that produced it to see the evidence the agent based it on.
+
+Then either apply it or reject it:
+
+* Applying re-verifies the change against the pipeline's configuration as it is now, not as it was when the agent proposed it, and a running pipeline then restarts to pick it up. A suggestion whose assumptions no longer hold is refused rather than applied blindly, and it stays pending, so you can retry it after the pipeline settles.
+* Rejecting leaves the pipeline untouched and closes the suggestion.
+
+Reviewing a suggestion changes nothing on the live pipeline, so read as many as you like before deciding. Suggestions do not expire, but an old one is more likely to be refused on apply, because the pipeline's configuration has likely drifted. Review them while they still match the pipeline.
+
+To let an agent apply its own changes instead, see [_](/ai-agents/capabilities#change-approval).
+
+## Read investigations from the CLI \[#cli]
+
+The Grepr CLI reads investigations, which is useful for auditing many runs at once or feeding them into your own tooling.
+
+```bash
+# List an agent's failed investigations
+grepr investigation:list --agent-id <agent-id> --status FAILED --page-size 10
+
+# Read one investigation's metadata, summary, and recorded actions
+grepr investigation:get <investigation-id>
+
+# Read the turns, including tool calls and their results
+grepr investigation:turns <investigation-id> --page-size 10
+
+# Export a transcript to a file
+grepr investigation:transcript <investigation-id> --all --output investigation.json
+```
+
+To follow a running investigation as it progresses, add `--follow` to `investigation:turns`. To learn more about the CLI, see [_](/cli).
+
+## Frequently Asked Questions
+
+### How do I start a Grepr AI agent investigation manually?
+
+On the agent's page, click Run investigation, optionally enter the context the agent should start from, and click Start investigation. Context is the only instruction beyond the agent's system prompt, so include the service, the time range, and the symptom.
+
+### What does a stopped investigation mean in Grepr?
+
+Stopped covers two situations. An investigation that is still waiting for instruction is paused and can be resumed, carrying on from where it left off while its sandbox is still there. If the sandbox is lost while it is paused, the resumed agent restarts from the triggering signals and the message you resume it with. One that waited too long without instruction has ended, and remains readable but is no longer resumable. The status icon tells the two apart.
+
+### Can I resume a completed Grepr AI agent investigation?
+
+No. Completed, failed, cancelled, discarded, and timed-out stopped investigations are final. You can start a new investigation seeded from the finished one, and add a message to direct it, such as asking it to verify that a change worked.
+
+### Why was my investigation discarded?
+
+There are three reasons: the agent was at its concurrency limit and set to discard extra signals, a queued investigation waited longer than the maximum queue wait, or a token budget was exhausted. The agent's page reports which token budget blocked it and when the window resets.
+
+### How do I review a pipeline change proposed by a Grepr AI agent?
+
+Suggestions appear on the pipeline's Suggestions step. Review the proposed change as a difference against the current configuration and read the investigation that produced it, then apply or reject it. Applying re-verifies the change against the pipeline as it is now, and a running pipeline restarts to pick it up. A suggestion that no longer verifies is refused and stays pending, leaving the pipeline untouched.

package/build/dist/docs-index/9f481451-3e00-4d72-8f3c-c59a2087c7ae.txt

@@ -0,0 +1,168 @@
+Turn on Grepr AI agent memory so an agent records what it concluded, counts recurrences, and searches past investigations during a new one.
+
+# Remember past investigations
+
+Without memory, every investigation starts from nothing. An agent that diagnosed a problem last week reaches the same conclusion the same slow way this week, and nobody learns that the problem has now happened five times.
+
+*Memory* changes that. An agent with memory enabled records what it concluded when it reaches a diagnosis, recognizes when a later investigation reaches the same conclusion and counts the recurrence, and searches those records at the start of a new investigation to find out whether it has seen this before.
+
+Both halves show up in the investigation's tool calls. A memory search runs near the start, before the agent has looked at anything else, and the record is written at the end, when it has a diagnosis.
+
+The agent decides what to record and whether something is a recurrence. Grepr does not extract conclusions on its behalf or merge records by similarity, because the investigating agent is the only thing that saw the evidence.
+
+Memory is off until you turn it on and choose where the memories are stored.
+
+## What an agent records \[#what-recorded]
+
+An agent records at most one memory per investigation, written when it reaches a diagnosis rather than after the fact. Each memory holds:
+
+| Field | What it holds |
+| --- | --- |
+| Title | A short name for the problem. |
+| Symptoms | What was observed. |
+| Root cause | What the agent concluded was responsible. |
+| Root cause confidence | Whether the cause is **confirmed**, **suspected**, or **unknown**. |
+| Ruled out | Causes the agent checked and eliminated, so a later investigation does not repeat that work. |
+| Resolution | What resolved it, or what was attempted. |
+| Significance | How much the conclusion matters. See [Significance](#classification). |
+| Entity tags | The services, pipelines, and environments the memory is about. See [Entity tags](#tagging). |
+| Recurrence count | How many investigations reached this same conclusion. |
+
+An agent can correct its own memory for an investigation while that investigation is running, so an early diagnosis it later disproves does not stay on the record. Correcting a memory does not count as a new recurrence.
+
+### Significance \[#classification]
+
+Significance is how an agent classifies what it found, and it decides how the memory can be found later:
+
+| Significance | Meaning |
+| --- | --- |
+| Incident | A real problem was identified. |
+| Observation | Not a problem, but a conclusion worth keeping. |
+| Inconclusive | The agent could not determine whether there was a problem. |
+| Benign | Triaged as no problem. |
+
+Benign memories are recorded but not indexed for search by meaning or by text. They are reachable only by a timeline search over their entity tags. This keeps the large number of routine all-clear findings out of the way of searches for real problems, at the cost of making them harder to find. If you want an agent to notice that a given service has been triaged as benign many times, search the timeline for that service rather than searching by text.
+
+## Turn on memory \[#enable]
+
+Memory needs somewhere to store its search index and a model to build that index with, so there are three things to set up.
+
+### Step 1: Create a vector index integration \[#vector-index]
+
+1. On the **Integrations** page, next to the **S3 Vector Index** section heading, click **Add new**.
+2. In the **Add Vector Index** dialog, enter a **Name** and the number of **Dimensions** the embedding model you plan to use produces, then click **Create**.
+
+The dimensions must match the model's output, so choose the embedding model first and use its dimension count. An index's dimensions are fixed after creation.
+
+### Step 2: Create an embedding integration \[#embedding-integration]
+
+Memory embeds each record with a model from an LLM integration that provides embeddings. If you do not have one, create it before you continue. See [_](/integrations/llm).
+
+An agent's reasoning model and its embedding model are separate choices. An agent can reason with one integration and embed with another.
+
+### Step 3: Turn on memory for the agent \[#agent-memory]
+
+1. On the agent's page, go to the **Memory** step.
+2. Turn on **Remember past investigations**.
+3. Under **Storage**, select the **Vector index integration**, the **Embedding credentials**, and the **Embedding model**.
+4. Save the agent.
+
+Grepr creates the search index when you create the vector index integration in Step 1, and discards the integration if the index cannot be created. Saving the agent then checks that the embedding model actually works against that index, by embedding a test value with it. So a wrong model or an unusable credential stops the save rather than surfacing later as memories that were never indexed.
+
+### Choose an embedding model and keep it \[#embedding-model]
+
+A memory is embedded with the model the agent had when it was recorded, and a query can only be compared against embeddings from the same model. Changing an agent's embedding model therefore cuts its new memories off from the ones it already recorded, as far as searching by meaning is concerned. Treat the choice as long lived.
+
+Using the same model across several agents does not pool their memories into one semantic search. A search by meaning always targets one agent, as described next.
+
+## How an agent searches its memory \[#search-modes]
+
+A search runs in exactly one of three modes, and which mode fits depends on what the agent is trying to find:
+
+| Mode | What it finds | Use it to answer |
+| --- | --- | --- |
+| Semantic | Investigations whose conclusions mean something similar to the query. | Has a problem like this happened before? |
+| Text | Investigations mentioning specific words, using full-text search. | Has this exact error string or identifier come up before? |
+| Timeline | Investigations about given entities, ordered by time. | What has been happening to this service recently? |
+
+Semantic search finds a past incident described in different words, which text search misses. Text search finds a literal, such as an error code or a host name, which semantic search can rank poorly. Timeline search needs entity tags rather than a query, and it is the only mode that returns benign memories.
+
+The modes also differ in how much they cover, which matters when you read an empty result:
+
+* A semantic search covers one agent at a time, because a query is only comparable against embeddings made with that agent's model. An empty semantic result means nothing similar was found within what the search could reach. It is not evidence that the agent recorded nothing similar, and it is not evidence that your organization has not seen the problem. A memory embedded with a model the agent no longer uses is unreachable until it is embedded again, and a search that cannot reach the embedding provider returns empty as well. When an empty result matters, confirm it with a text or timeline search, which read the records directly.
+* A text or timeline search covers every agent in your organization by default, so it is the one to use when you want the organization's whole history.
+
+So to find out whether any agent has seen something, search by text or timeline, or repeat the semantic search against each agent you care about.
+
+A result carries the memory's content along with its recurrence count, how long ago it was recorded, when it was last seen, and whether it is active, recent, or historical. There is no relevance score, because the agent judges from the content and the provenance rather than a ranking number.
+
+Search returns at most 50 results and has no pagination, so a broad query can be incomplete. Narrowing by entity tags or by significance is more effective than raising the limit.
+
+## Entity tags \[#tagging]
+
+Entity tags are what make memories findable by the thing they are about, such as a service, a pipeline, or an environment. Each memory carries two kinds:
+
+* Tags Grepr derives from the triggering signal, which identify the source and the signal type.
+* Tags the agent adds, which name the entities it concluded the memory is about.
+
+Grepr derives its tags using a mapping per signal type, which extracts values from the signal payload by path. The shipped mappings cover the common cases:
+
+| Signal type | Tags derived from the signal |
+| --- | --- |
+| Log pattern | The pipeline, the pattern, and the service, environment, and Kubernetes namespace from the sample log event. |
+| Webhook | The integration, and the service and host from the payload. |
+| Manual | The signal type only. |
+
+The webhook mapping reads the service and host from field names Grepr expects. If your payloads name those fields differently, add a mapping so the tags resolve. On the agent's **Memory** step, under **Entity tags**, add a mapping for the signal type, then add each tag key with the paths to read it from. Grepr tries the paths in order and uses the first that resolves.
+
+Consistent tag values matter more than complete ones. A service tagged `checkout` in some memories and `checkout-svc` in others splits its history in two, and a timeline search finds only half. Grepr gives an agent the tag values already in use in your organization when it searches, so an agent that searches before recording reuses existing values rather than inventing new ones.
+
+## Who can read and write memories \[#scope]
+
+* Reads are organization-wide. Any agent can search any other agent's memories in your organization. Operational history is only useful shared, so an agent investigating a service finds what another agent concluded about the same service. Permission is uniform across the modes, but coverage is not: a semantic search still examines one agent at a time. See [How an agent searches its memory](#search-modes).
+* Writes are owner-only. A memory can be written or corrected only by the agent that ran the investigation, so one agent cannot overwrite another's conclusions.
+
+When an agent finds that a past memory describes what it is now seeing, it links its investigation to that memory, which raises the recurrence count rather than creating a near-duplicate record. Each contributing investigation counts once.
+
+Memories outlive the agent that wrote them. Deleting an agent leaves its memories searchable by your other agents.
+
+## Search memories from the CLI \[#cli]
+
+The Grepr CLI searches the same memories an agent does, which is how you read what your agents have concluded.
+
+```bash
+# Find investigations mentioning a literal string
+grepr investigation:memory:search --mode text --query "connection refused" --limit 5
+
+# Find investigations whose conclusions are similar in meaning
+grepr investigation:memory:search --mode semantic --agent-id <agent-id> --query "intermittent ingestion failures"
+
+# See what has been happening to one service lately
+grepr investigation:memory:search --mode timeline --entity-tag entity:service=checkout
+```
+
+A semantic search needs an agent id, because a query can only be compared inside the index that agent embeds into. Text and timeline searches cover every agent in your organization by default. Timeline searches need at least one entity tag.
+
+The CLI is how you read what your agents have concluded outside of an investigation. To learn more about the CLI, see [_](/cli).
+
+## Frequently Asked Questions
+
+### What does Grepr AI agent memory store?
+
+One memory per investigation, holding a title, the symptoms, the root cause and the agent's confidence in it, the causes it ruled out, the resolution, a significance classification, entity tags, and a count of how many investigations reached the same conclusion.
+
+### What do I need to turn on agent memory?
+
+Three things: a vector index integration whose dimensions match your embedding model, an LLM integration that supplies the embedding model, and the embedding model name. Grepr creates the search index when you create the vector index integration. Saving the agent then checks that the embedding model works against that index, so a wrong model stops the save.
+
+### How does an agent search its memory?
+
+In one of three modes. Semantic search finds conclusions that mean something similar to the query, and covers one agent at a time. Text search finds specific words, such as an error code. Timeline search finds memories about given entities ordered by time, and is the only mode that returns benign memories. Text and timeline searches cover every agent in the organization by default.
+
+### Can one Grepr AI agent read another agent's memories?
+
+Yes, permission is organization-wide, so any agent can search any other agent's memories in your organization. Coverage differs by mode: text and timeline searches span every agent by default, while a search by meaning targets one agent at a time, because a query is only comparable against embeddings made with that agent's model. Writes are owner-only.
+
+### How do I read what my agents have remembered?
+
+Search them with the grepr investigation:memory:search command, choosing text, semantic, or timeline mode, or read them in an investigation that searched them. The Memory step of an agent holds the settings rather than the records.

package/build/dist/docs-index/{d0927d57-1fbe-4b17-8c9e-ba16c14fae50.txt → ad087a79-1a9d-4f15-8467-107a6a6edaf7.txt}

@@ -8,6 +8,8 @@ Before sending log data to the destination platform, Grepr uses machine learning
 
 Grepr supports popular observability platforms, including Datadog, Splunk, New Relic, Sumo Logic, Grafana Cloud, and OpenTelemetry-compatible platforms.
 
+Grepr AI agents build on the same data. An agent examines your logs and pipeline configuration with the capabilities you grant it and reports what it found. Start an investigation yourself, or connect an agent to a pipeline or another system so it investigates on its own. To learn more, see [_](/ai-agents).
+
 If you're just getting started with Grepr, follow the **Get started** guides below. If you're already using Grepr and need information on creating pipelines to process logs or to query raw logs stored in Grepr, see the guides under **Process and explore your logs**. If you need to automate your Grepr tasks or implement clients that use Grepr features, or use JavaScript to code reusable components for your pipelines, see the **Developers** documentation.
 
 ## Get started
@@ -24,6 +26,8 @@ If you're just getting started with Grepr, follow the **Get started** guides bel
 
 [Query logs in the data lake](/queries)
 
+[Grepr AI agents](/ai-agents)
+
 ## Developers
 
 [Use the Grepr Rest API](/apis)

package/build/dist/docs-index/{202c9fcf-32c8-455f-a0e7-92ba4f9b9dcb.txt → adf9e475-3162-4882-abdd-d9b7e09c80f2.txt}

@@ -4,6 +4,8 @@
 
 **Operation ID**: `get_3`
 **Summary**: Get a skill
+## Tags
+- Skills
 ## Parameters
 
 - **id** (required) - path

package/build/dist/docs-index/{08907331-a7ce-4710-b546-484f44fa6c01.txt → b04e2107-b628-47f2-aaa4-f1defc349995.txt}

@@ -4,6 +4,8 @@
 
 **Operation ID**: `update_1`
 **Summary**: Update an organization skill
+## Tags
+- Skills
 ## Parameters
 
 - **id** (required) - path

package/build/dist/docs-index/{271c4694-8b65-4300-8882-5ef85afa5731.txt → bb8966a9-0e14-4211-9bae-da27ebee89e0.txt}

@@ -440,6 +440,7 @@ The Grepr CLI includes commands to:
 * Manage datasets for log storage and querying: `dataset:create`, `dataset:list`, `dataset:get`, `dataset:update`, `dataset:delete`.
 * Search and retrieve Grepr documentation: `docs:search`, `docs:get`.
 * Test Grok rules: `grok:parse`.
+* Read AI agents and their investigations: `agent:list`, `agent:get`, `investigation:list`, `investigation:get`, `investigation:turns`, `investigation:transcript`, `investigation:memory:search`.
 
 The following sections contain examples demonstrating how to use these commands. Most of these examples assume you have already saved a default configuration. If you haven't saved a default configuration, include the `--conf` option to specify a saved configuration when you run CLI commands. To learn how to create a default configuration, see [Configure the Grepr CLI](#cli-configuration).
 
@@ -951,6 +952,81 @@ grepr grok:parse \
   --helper-rules "CUSTOM_TIMESTAMP %{MONTHDAY}-%{MONTH}-%{YEAR} %{TIME}" "SEVERITY (CRITICAL|ERROR|WARN|INFO|DEBUG)"
 ```
 
+## Examples: AI agent and investigation commands \[#agent-command-examples]
+
+Use these commands to read your AI agents, the investigations they ran, and the conclusions they recorded. The commands are read-only: you create and configure agents in the Grepr UI or through the REST API. To learn what agents are, see [_](/ai-agents).
+
+### List agents
+
+```console
+# List the agents in your organization, with their identifiers
+grepr agent:list
+```
+
+```console
+# Get one agent's configuration and its aggregate metrics
+grepr agent:get <agent-id>
+```
+
+The configuration `agent:get` returns is the agent's configuration now, which is not necessarily the configuration an older investigation ran under.
+
+### List and read investigations
+
+```console
+# List an agent's investigations
+grepr investigation:list --agent-id <agent-id> --page-size 10
+```
+
+```console
+# List only the failed investigations, repeating --status to include more states
+grepr investigation:list --agent-id <agent-id> --status FAILED --status DISCARDED
+```
+
+```console
+# Read one investigation's metadata, summary, and the changes it made
+grepr investigation:get <investigation-id>
+```
+
+```console
+# Read the turns of an investigation, including tool calls and their results
+grepr investigation:turns <investigation-id> --page-size 10
+```
+
+To page through turns, pass the last sequence number you read to `--after-seq`. To follow a running investigation as it progresses, add `--follow`, which stops when the investigation pauses, reaches a terminal state, or hits the deadline. To learn what each investigation state means, see [_](/ai-agents/investigations#states).
+
+### Export a transcript
+
+```console
+# Export up to 50 turns to a file
+grepr investigation:transcript <investigation-id> --output investigation.json
+```
+
+```console
+# Export every turn, allowing more time for a long investigation
+grepr investigation:transcript <investigation-id> --all --timeout 5m
+```
+
+An export reports its own coverage, so check that before you treat one as complete.
+
+### Search agent memories
+
+```console
+# Find investigations mentioning a literal string
+grepr investigation:memory:search --mode text --query "connection refused" --limit 5
+```
+
+```console
+# Find investigations whose conclusions are similar in meaning
+grepr investigation:memory:search --mode semantic --agent-id <agent-id> --query "intermittent ingestion failures"
+```
+
+```console
+# See what has been happening to one service lately
+grepr investigation:memory:search --mode timeline --entity-tag entity:service=checkout
+```
+
+A semantic search needs an agent id, because a query can only be compared inside the index that agent embeds into. A timeline search needs at least one entity tag. To learn what memories hold and how the modes differ, see [_](/ai-agents/memory#search-modes).
+
 ## Examples: Documentation commands
 
 Use the CLI documentation commands to perform semantic searches of the Grepr documentation and retrieve documentation content. The CLI commands allow you to find and read relevant information without leaving the terminal, and can be particularly useful for tasks like working with AI assistants or scripting workflows.

package/build/dist/docs-index/c3aa7a9e-80a4-442f-8b3f-860d75d6a4c3.txt

@@ -0,0 +1,148 @@
+Create a Grepr AI agent, write its instructions, choose its model, set the limits that bound what it spends, and edit or delete it later.
+
+# Create an AI agent
+
+You create an agent once and it runs from then on, so the settings you choose decide both what the agent is good at and what it costs. This page covers the settings that define the agent itself. Its capabilities, its memory, and its subscriptions each have their own page, and the wizard links to the same settings.
+
+## Requirements
+
+Before you create an agent, you need:
+
+* An LLM integration for the model the agent reasons with. See [_](/integrations/llm).
+* A Grepr service account for the agent to act as. See [_](/admin/service-accounts).
+
+## Create an agent \[#create]
+
+On the **Agents** page, click **Create agent**. The **Create agent** wizard collects the agent's settings in six steps, and you can move between steps with **Back** and **Continue** or by clicking a step in the stepper. The agent is created when you click **Create agent** on the last step, so you can revise any step before then.
+
+### Step 1: Name the agent and write its instructions \[#step1-instructions]
+
+Enter a **Name** that says what the agent is for, such as `prod-log-triage`. The name identifies the agent everywhere you subscribe it to a source or read its investigations, and you can change it later.
+
+In the **System prompt** field, write the instructions that frame every investigation this agent runs. To start from a working example rather than an empty field, click **Use a starter prompt** and edit what it gives you.
+
+### Step 2: Choose a model \[#step2-model]
+
+1. In the **Provider** menu, select the provider of the LLM integration you want the agent to use.
+2. In the **LLM integration** menu, select the integration that provides the credentials for that provider. If the menu is empty, create the integration first. See [_](/integrations/llm).
+3. In the **Model name** field, enter the model the agent reasons with. Grepr suggests the models your integration reports, but the field accepts any model identifier the provider serves, so a model missing from the list is still valid.
+4. Set the agent's limits under **Advanced configuration**. See [Set an agent's limits](#limits).
+
+Investigations are long-running and tool-heavy, so the model you choose changes how well the agent reasons across many turns, not just how fast it answers. Prefer a model that handles extended tool use.
+
+### Step 3: Grant capabilities \[#step3-capabilities]
+
+The **Capabilities** step is where you choose the service account the agent acts as, the tools and skills it can use, the MCP servers it can call, and whether the pipeline changes it proposes need your approval. To learn more, see [_](/ai-agents/capabilities).
+
+### Step 4: Configure memory \[#step4-memory]
+
+The **Memory** step is where you decide whether the agent keeps and searches conclusions from its past investigations. To learn more, see [_](/ai-agents/memory).
+
+### Step 5: Subscribe to signal sources \[#step5-subscriptions]
+
+The **Subscriptions** step is where you connect the agent to the pipelines and Grepr Agent integrations whose signals it investigates. You can leave it empty and subscribe later from the agent's page. To learn more, see [_](/ai-agents/subscriptions).
+
+### Step 6: Review and create \[#step6-review]
+
+The **Review** step lists every setting you chose. Check the system prompt, the model, the abilities and tools, and the subscriptions, then click **Create agent**.
+
+An agent with subscriptions starts investigating as soon as its sources produce signals. To review its behavior before it runs on live signals, create it without subscriptions, start an investigation manually, read the transcript, then subscribe it. See [_](/ai-agents/investigations#start-manual).
+
+## Set an agent's limits \[#limits]
+
+An agent's limits are under **Advanced configuration** on the **Model** step, and on the **Behavior** step after the agent exists. They are what bound the work and the cost of a single investigation and of the agent as a whole.
+
+### Limit a single investigation \[#run-limits]
+
+| Setting | What it does |
+| --- | --- |
+| **Max output tokens** | The largest response Grepr accepts from the model in one call. |
+| **Max turns per investigation** | How many turns an investigation can take before it ends. A turn is one model call and the tool calls that follow it. |
+| **Max tokens per investigation** | The total tokens one investigation can consume. The default is 3,000,000. |
+
+An investigation that reaches its turn or token limit ends where it is, keeping the transcript and the summary it had reached.
+
+### Limit the agent as a whole \[#window-limits]
+
+**Agent max tokens per window** caps the tokens this agent can consume across all its investigations in each budget window. Leave it empty to bound the agent only by the budget on its LLM integration.
+
+Grepr reserves an investigation's tokens before it starts and requires room in two budgets: this agent's window budget, and the budget on the LLM integration the agent shares with any other agent using it. When either is exhausted, new investigations stop starting, and the agent's page reports which budget blocked them and when the window resets. Raising this agent's limit does not help when the shared integration is the one that is full. To set the integration's budget, see [_](/integrations/llm#max-tokens).
+
+The two kinds of invocations, manual and signal triggered, end differently when a budget is exhausted. An investigation you start manually is discarded immediately, so you learn straight away. One triggered by a signal stays queued and runs when capacity returns, unless it waits longer than the maximum queue wait.
+
+### Control concurrency and queueing \[#concurrency]
+
+| Setting | What it does |
+| --- | --- |
+| **Max concurrent investigations** | How many of this agent's investigations run at the same time. The default is 3. |
+| **When at the limit** | Whether an additional signal waits or is dropped. **Queue** holds it until a slot frees. **Discard** drops it. |
+| **Max queue wait (minutes)** | How long a queued investigation waits before Grepr discards it. Leave empty for no limit. |
+
+The maximum queue wait applies only to investigations triggered by a signal, not to the ones you start manually. Set it when a stale signal is not worth investigating, such as a pattern that stopped occurring an hour ago. Leave it empty when you want every signal investigated eventually.
+
+An agent subscribed to a busy pipeline can produce more signals than it can investigate. **Discard** keeps the agent current at the cost of skipping signals, and **Queue** with a maximum wait keeps a bounded backlog. To reduce the signals instead of dropping them, narrow what the source emits. See [_](/ai-agents/subscriptions).
+
+## Write a system prompt \[#system-prompt]
+
+The system prompt is read at the start of every investigation this agent runs, so it should describe the agent's standing job rather than any one incident. A prompt that works well:
+
+* States what the agent is responsible for and what it should leave alone.
+* Names the systems and services it covers, using the same names that appear in your logs, so the agent can match a signal to a service.
+* Says what a finished investigation looks like, such as whether the agent should attempt a remediation or only diagnose.
+* Says when the agent should change a pipeline and when it should not.
+
+Keep behavior that only applies sometimes out of the prompt and put it in a skill, which the agent loads when it is relevant. This keeps the prompt short and lets several agents share the same guidance. See [_](/ai-agents/skills).
+
+You can revise the prompt at any time on the agent's **Behavior** step. A revised prompt applies to investigations that start afterwards, and running investigations keep the prompt they started with.
+
+## Monitor an agent \[#monitor]
+
+The agent's **Overview** step reports how the agent is doing over the time range you select, with its model, its last investigation, the share of its runs that failed, its run times, and how much of its token budget it has used. Three charts break down the investigations it started, how they ended, and the tokens they consumed.
+
+Read the failure rate together with the outcomes chart. Failures concentrated in time usually point at the model or a tool that became unavailable, while a failure rate that is steady across the range usually points at the agent's instructions or its limits.
+
+When a token budget is exhausted, new investigations stop starting and resume when the window resets. The agent's page shows which of the two budgets blocked them.
+
+## Edit an agent \[#edit]
+
+An agent's settings are spread across the steps on its page, which hold the same fields as the wizard:
+
+* **Behavior** holds the name, the system prompt, the model, and the limits.
+* **Capabilities** holds the service account, the tools, the skills, the MCP integrations, and the change approval mode.
+* **Memory** holds the memory settings.
+
+Changes on these three steps are held until you click **Save Changes**, so you can revise several steps in one pass. To abandon them, click **Discard Changes**. Subscriptions are not part of this and apply as soon as you make them.
+
+An investigation reads the agent's instructions, model, and limits when it starts, so correcting those mid-incident leaves the current run on the settings it began with and applies to the next one.
+
+The change approval mode is the exception. Grepr checks it when the agent submits a pipeline change, not when the investigation started, so switching an agent to **Auto-apply** lets an investigation that is already running apply its own changes.
+
+## Delete an agent \[#delete]
+
+To delete an agent, on its page, open the three-dot menu and select **Delete agent**. You can also delete it from the three-dot menu on its card on the **Agents** page.
+
+Grepr refuses to delete an agent while a pipeline is subscribed to it or a Grepr Agent integration names it, so detach it from both on its **Subscriptions** step first. A pipeline that names the agent directly in its agent signal sink is not covered by that check, so open the sink in each such pipeline and clear the agent from the **Agents** field yourself. A sink keeps at least one agent, so where the agent you are deleting is the only one named, either select another agent in its place or remove the sink along with the routes that feed it. A signal that arrives for a deleted agent is discarded. Investigations already running finish, and no new ones start.
+
+Deleting an agent does not delete its investigations or the memories it recorded, which stay readable and searchable by your other agents.
+
+## Frequently Asked Questions
+
+### What do I need before creating a Grepr AI agent?
+
+You need an LLM integration for the model, a Grepr service account for the agent to act as, and the Edit permission on integrations at the organization or team level.
+
+### How many investigations does a Grepr AI agent run at once?
+
+You set the maximum number of concurrent investigations, which defaults to 3, and choose whether an additional signal queues or is discarded at that limit. A queued investigation can also be given a maximum wait, after which Grepr discards it.
+
+### What happens when an agent reaches its token budget?
+
+New investigations stop starting, and the agent's page reports whether the agent's own window budget or the shared LLM integration's budget blocked them, and when the window resets. An investigation started manually is discarded immediately, while one triggered by a signal stays queued until capacity returns or its maximum queue wait elapses.
+
+### Do changes to an agent affect investigations that are already running?
+
+Mostly no. An investigation reads the instructions, model, and limits it started with, so changes to those apply to the next run. The change approval mode is the exception: Grepr checks it when the agent submits a pipeline change, so switching to Auto-apply lets an investigation that is already running apply its own changes.
+
+### Why can't I delete my Grepr AI agent?
+
+Grepr refuses to delete an agent while a pipeline is subscribed to it or a Grepr Agent integration names it. Detach it from both on its Subscriptions step, then delete it. Investigations already running finish, and its recorded memories remain searchable by your other agents.

package/build/dist/docs-index/c4d56a6f-b763-4047-92c8-1850e40442a1.json

@@ -0,0 +1 @@
+{"docType":"doc"}