@grafloria/element 0.3.20 → 0.3.22

package/src/libs/engine/src/engine/DiagramEngine.js

@@ -1,2190 +0,0 @@
-"use strict";
-// DiagramEngine - Main orchestrator for diagram functionality
-Object.defineProperty(exports, "__esModule", { value: true });
-exports.DiagramEngine = void 0;
-const tslib_1 = require("tslib");
-const EventBus_1 = require("../events/EventBus");
-const TemplateRegistry_1 = require("../templates/TemplateRegistry");
-const DiagramEntity_1 = require("../models/DiagramEntity");
-const DiagramStore_1 = require("../state/DiagramStore");
-const CommandManager_1 = require("../commands/CommandManager");
-const PluginManager_1 = require("../plugins/PluginManager");
-const TypeRegistry_1 = require("../validation/TypeRegistry");
-const ValidationEngine_1 = require("../validation/ValidationEngine");
-const Serializer_1 = require("../serialization/Serializer");
-const PerformanceMonitor_1 = require("../performance/PerformanceMonitor");
-const DiagramModel_1 = require("../models/DiagramModel");
-const NodeModel_1 = require("../models/NodeModel");
-const LinkModel_1 = require("../models/LinkModel");
-const GroupModel_1 = require("../models/GroupModel"); // Phase 1.6c
-const AddNodeCommand_1 = require("../commands/basic/AddNodeCommand");
-const RemoveNodeCommand_1 = require("../commands/basic/RemoveNodeCommand");
-const dynamic_ports_1 = require("../ports/dynamic-ports");
-const AddLinkCommand_1 = require("../commands/basic/AddLinkCommand");
-const RemoveLinkCommand_1 = require("../commands/basic/RemoveLinkCommand");
-const basic_1 = require("../commands/basic"); // Phase 1.6c
-const basic_2 = require("../commands/basic"); // Phase 1.7
-const basic_3 = require("../commands/basic"); // Phase 1.8
-const ClipboardManager_1 = require("../clipboard/ClipboardManager"); // Phase 1.8
-const SelectionManager_1 = require("../selection/SelectionManager"); // Phase 1.8a
-const DiagramMode_1 = require("./DiagramMode");
-const ModeManager_1 = require("./ModeManager");
-// Phase 1: Interaction modes
-const ConnectionStateManager_1 = require("../state/ConnectionStateManager");
-const InteractionConfig_1 = require("../config/InteractionConfig");
-// Routing imports
-const RoutingEngine_1 = require("../routing/RoutingEngine");
-const LiveReroutingEngine_1 = require("../routing/LiveReroutingEngine"); // Phase 0.2
-const ObstacleMapBuilder_1 = require("../routing/ObstacleMapBuilder");
-const StraightRouter_1 = require("../routing/algorithms/StraightRouter");
-const OrthogonalRouter_1 = require("../routing/algorithms/OrthogonalRouter");
-const AStarRouter_1 = require("../routing/algorithms/AStarRouter");
-const DijkstraRouter_1 = require("../routing/algorithms/DijkstraRouter");
-const VisibilityGraphRouter_1 = require("../routing/algorithms/VisibilityGraphRouter");
-// Wave 7 (Auto-layout) — Card 0: the unified layout entry point.
-const layout_registry_1 = require("../layout/layout-registry");
-const rng_1 = require("../layout/rng");
-const mental_map_1 = require("../layout/incremental/mental-map");
-// Wave 7 — Card 4: nested container / subgraph layout.
-const CompoundLayoutService_1 = require("../layout/CompoundLayoutService");
-// Wave 7 — Card 3: off-main-thread layout.
-const layout_host_1 = require("../layout/layout-host");
-const layout_graph_1 = require("../layout/layout-graph");
-class DiagramEngine {
-    constructor(config = {}) {
-        // Phase 0.2: Live rerouting engine
-        this.liveReroutingEngine = null;
-        // Current diagram
-        this.diagram = null;
-        // Disposer functions for the engine's own listeners on the attached diagram.
-        // Stored on attach and invoked on detach so switching diagrams unsubscribes
-        // cleanly without accumulating duplicate handlers (and without touching the
-        // diagram's contents).
-        this.diagramDisposers = [];
-        // Wave 6 (Card 7): re-entry guard for the dynamic-port allocator.
-        this.reconcilingDynamicPorts = false;
-        // Wave 2 (Edges & links): transient endpoint-reconnection preview (see type).
-        this.reconnectionPreview = null;
-        this.proximityPreview = null;
-        this.snapGuides = null;
-        // State
-        this.initialized = false;
-        this.destroyed = false;
-        this.config = config;
-        // Initialize core systems
-        this.eventBus = new EventBus_1.EventBus();
-        this.store = new DiagramStore_1.DiagramStore();
-        // Empty by default (a plain app pays nothing); registerTemplateLibrary() /
-        // registerGeneratedTemplates() populate it. Closes the documented-but-absent
-        // `engine.templateRegistry` the template-library integration already targets.
-        this.templateRegistry = new TemplateRegistry_1.TemplateRegistry(this.eventBus);
-        // Phase 1: Initialize interaction config
-        this.interactionConfig = Object.assign(Object.assign({}, InteractionConfig_1.DEFAULT_INTERACTION_CONFIG), config.interaction);
-        // Phase 1: Initialize connection state manager
-        this.connectionStateManager = new ConnectionStateManager_1.ConnectionStateManager(this.eventBus);
-        // CRITICAL FIX: Listen for connection complete events and create the actual link
-        this.eventBus.on('connection:complete', (event) => tslib_1.__awaiter(this, void 0, void 0, function* () {
-            var _a, _b;
-            if (this.diagram && event.sourcePort && event.targetPort) {
-                const sourcePort = event.sourcePort;
-                const targetPort = event.targetPort;
-                // Find the nodes that own these ports
-                const nodes = this.diagram.getNodes();
-                let sourceNode = null;
-                let targetNode = null;
-                for (const node of nodes) {
-                    if (node.getPort(sourcePort.id)) {
-                        sourceNode = node;
-                    }
-                    if (node.getPort(targetPort.id)) {
-                        targetNode = node;
-                    }
-                    if (sourceNode && targetNode)
-                        break;
-                }
-                if (sourceNode && targetNode) {
-                    // Determine path type from config
-                    // Map ConnectionLineStyle enum to LinkModel pathType
-                    let pathType = 'smooth';
-                    switch (this.interactionConfig.connectionLineStyle) {
-                        case 'bezier':
-                            pathType = 'bezier';
-                            break;
-                        case 'step':
-                            pathType = 'orthogonal';
-                            break;
-                        case 'straight':
-                            pathType = 'direct';
-                            break;
-                        default:
-                            pathType = 'smooth';
-                    }
-                    console.log(`🔗 Creating link with pathType: ${pathType} (from connectionLineStyle: ${this.interactionConfig.connectionLineStyle})`);
-                    // Create the link manually (same logic as createSmartLink)
-                    const link = new LinkModel_1.LinkModel(sourcePort.id, targetPort.id, pathType);
-                    link.sourceNodeId = sourceNode.id;
-                    link.targetNodeId = targetNode.id;
-                    // Register connections in ports
-                    sourcePort.addConnection(link.id, 'source');
-                    targetPort.addConnection(link.id, 'target');
-                    // Calculate initial path using RoutingEngine
-                    const sourcePos = sourcePort.getAbsolutePosition(sourceNode.getBoundingBox());
-                    const targetPos = targetPort.getAbsolutePosition(targetNode.getBoundingBox());
-                    // Get port directions for routing
-                    const sourceDirection = (_a = sourcePort.alignment) === null || _a === void 0 ? void 0 : _a.side;
-                    const targetDirection = (_b = targetPort.alignment) === null || _b === void 0 ? void 0 : _b.side;
-                    // Use RoutingEngine to calculate path with obstacle avoidance
-                    yield this.generateLinkPathWithRouting(link, sourcePos, targetPos, sourceDirection, targetDirection, sourceNode, targetNode);
-                    // Add link THROUGH THE COMMAND MANAGER — one undoable step, like every
-                    // other edit. This used to call diagram.addLink() directly, so a link
-                    // the user DREW (the port-drag gesture) was the one mutation Ctrl+Z
-                    // could not take back (visio audit). The command serializes the link
-                    // AFTER routing, so the routed path is what redo restores.
-                    const command = new AddLinkCommand_1.AddLinkCommand(link);
-                    if (this.commandManager) {
-                        yield this.commandManager.execute(command);
-                    }
-                    else {
-                        this.diagram.addLink(link); // constructor-time fallback; unreachable in practice
-                    }
-                    console.log('✅ Link created successfully:', link.id, 'from', sourcePort.id, 'to', targetPort.id);
-                }
-                else {
-                    console.error('❌ Failed to find nodes for ports');
-                }
-            }
-        }));
-        // Initialize ModeManager with context provider
-        this.modeManager = new ModeManager_1.ModeManager(this.eventBus, () => ({
-            engine: this,
-            diagram: this.diagram,
-        }), config.mode);
-        const context = {
-            diagram: this.diagram,
-            eventBus: this.eventBus,
-            store: this.store,
-            engine: this,
-        };
-        this.commandManager = new CommandManager_1.CommandManager(context, this.eventBus);
-        this.pluginManager = new PluginManager_1.PluginManager(this, this.eventBus);
-        this.typeRegistry = new TypeRegistry_1.TypeRegistry();
-        this.validationEngine = new ValidationEngine_1.ValidationEngine(this.typeRegistry, this.eventBus); // Phase 1 - Pass EventBus
-        this.serializer = new Serializer_1.DiagramSerializer();
-        this.performanceMonitor = new PerformanceMonitor_1.PerformanceMonitor(config.performance);
-        this.routingEngine = new RoutingEngine_1.RoutingEngine(); // Initialize routing engine with LRU cache
-        this.clipboardManager = new ClipboardManager_1.ClipboardManager(); // Phase 1.8
-        this.selectionManager = new SelectionManager_1.SelectionManager(null, this.store, this.eventBus); // Phase 1.8a
-        // Configure systems
-        this.configureSystems();
-        // Install plugins
-        this.installPlugins();
-        // Mark as initialized
-        this.initialized = true;
-        this.eventBus.emit('engine:initialized');
-    }
-    /**
-     * Get current diagram
-     */
-    getDiagram() {
-        return this.diagram;
-    }
-    /**
-     * Get configuration (Phase 1 - Critical Fixes)
-     */
-    getConfig() {
-        return this.config;
-    }
-    /**
-     * Phase 1: Get interaction configuration
-     * Returns the current interaction mode settings
-     */
-    getInteractionConfig() {
-        return Object.assign({}, this.interactionConfig);
-    }
-    /**
-     * Phase 1: Set interaction configuration
-     * Updates interaction mode settings and emits event
-     */
-    setInteractionConfig(config) {
-        const oldConfig = Object.assign({}, this.interactionConfig);
-        this.interactionConfig = Object.assign(Object.assign({}, this.interactionConfig), config);
-        this.eventBus.emit('config:interaction-changed', {
-            oldConfig,
-            newConfig: this.interactionConfig,
-        });
-    }
-    /**
-     * Phase 1: Get connection state manager
-     * Used for managing connection drag operations
-     */
-    getConnectionStateManager() {
-        return this.connectionStateManager;
-    }
-    /**
-     * Wave 2 (Edges & links): current endpoint-reconnection preview, or null when
-     * no endpoint is being dragged. The renderer reads this to draw a ghost link.
-     */
-    getReconnectionPreview() {
-        return this.reconnectionPreview;
-    }
-    /**
-     * Wave 2 (Edges & links): set (or clear, with null) the endpoint-reconnection
-     * preview. Called by the interaction layer on start/move/end of an endpoint
-     * drag. Does not emit — the interaction layer already triggers re-render.
-     */
-    setReconnectionPreview(preview) {
-        this.reconnectionPreview = preview;
-        // A bare field write bumps no epoch, and the renderer's frame-skip gate
-        // dropped every repaint during an endpoint drag — the ghost line froze at
-        // the grab point while the model tracked the cursor perfectly (live
-        // audit). Overlay state IS picture state; say so.
-        (0, DiagramEntity_1.bumpMutationEpoch)();
-    }
-    /** The proximity-connect proposal the renderer draws as a live wire, or null. */
-    getProximityPreview() {
-        return this.proximityPreview;
-    }
-    /** Set (or clear, with null) the proximity-connect proposal. Does not emit —
-     *  the node drag that drives it already triggers re-renders. */
-    setProximityPreview(preview) {
-        this.proximityPreview = preview;
-        (0, DiagramEntity_1.bumpMutationEpoch)(); // overlay state is picture state — see setReconnectionPreview
-    }
-    /** The live snap-guide segments a node drag is showing, or null. */
-    getSnapGuides() {
-        return this.snapGuides;
-    }
-    /** Set (or clear, with null) the live snap guides. Does not emit — the node
-     *  drag that drives them already triggers re-renders. */
-    setSnapGuides(guides) {
-        this.snapGuides = guides;
-        (0, DiagramEntity_1.bumpMutationEpoch)(); // overlay state is picture state — see setReconnectionPreview
-    }
-    /**
-     * Get routing engine
-     * Used for calculating link paths with various algorithms
-     */
-    getRoutingEngine() {
-        return this.routingEngine;
-    }
-    /**
-     * Phase 0.2: Enable live rerouting
-     * Automatically updates link paths when nodes move or resize
-     */
-    enableLiveRerouting() {
-        if (!this.diagram) {
-            console.warn('Cannot enable live rerouting: No diagram loaded');
-            return;
-        }
-        if (!this.liveReroutingEngine) {
-            this.liveReroutingEngine = new LiveReroutingEngine_1.LiveReroutingEngine(this.routingEngine, this.diagram);
-        }
-        this.liveReroutingEngine.enable();
-        console.log('✅ Live rerouting enabled');
-    }
-    /**
-     * Phase 0.2: Disable live rerouting
-     */
-    disableLiveRerouting() {
-        if (this.liveReroutingEngine) {
-            this.liveReroutingEngine.disable();
-            console.log('⚠️ Live rerouting disabled');
-        }
-    }
-    /**
-     * Phase 0.2: Get live rerouting engine
-     */
-    getLiveReroutingEngine() {
-        return this.liveReroutingEngine;
-    }
-    /**
-     * Set diagram
-     */
-    setDiagram(diagram) {
-        const oldDiagram = this.diagram;
-        if (oldDiagram) {
-            this.detachDiagram(oldDiagram);
-        }
-        this.diagram = diagram;
-        if (diagram) {
-            this.attachDiagram(diagram);
-            // Wave 9 — Card 7: a diagram attached to an engine that is ALREADY in
-            // VIEW/PRESENTATION mode must come up LOCKED. Without this, read-only would
-            // depend on whether the host happened to call setMode() before or after
-            // loading the document — a race the host cannot see.
-            this.syncReadonlyLock();
-        }
-        this.store.set('diagram', diagram);
-        this.eventBus.emit('diagram:changed', { oldDiagram, newDiagram: diagram });
-        // Update command context
-        this.commandManager.updateContext({ diagram });
-        // Update selection manager diagram reference (Phase 1.8a)
-        this.selectionManager.setDiagram(diagram);
-        // Wave 6 (Card 6): the connection manager needs the graph to work out which
-        // ports are valid targets. Without this its `calculateValidTargets()` has
-        // nothing to walk — which is exactly why that method was a no-op stub and
-        // `validTargetPorts` was empty for the whole life of the feature.
-        this.connectionStateManager.setDiagram(diagram);
-    }
-    /**
-     * Create new diagram
-     */
-    createDiagram(name = 'Untitled') {
-        const diagram = new DiagramModel_1.DiagramModel(name);
-        this.setDiagram(diagram);
-        this.eventBus.emit('diagram:created', diagram);
-        return diagram;
-    }
-    /**
-     * Clear diagram
-     */
-    clearDiagram() {
-        if (this.diagram) {
-            this.diagram.clear();
-            this.store.set('selectedNodes', new Set());
-            this.store.set('selectedLinks', new Set());
-            this.commandManager.clear();
-            this.eventBus.emit('diagram:cleared');
-        }
-    }
-    /**
-     * Add node implementation
-     */
-    addNode(configOrNode) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            return this.performanceMonitor.measure('addNode', () => tslib_1.__awaiter(this, void 0, void 0, function* () {
-                var _a, _b;
-                // Determine if we received a config or a NodeModel
-                let node;
-                if (configOrNode instanceof NodeModel_1.NodeModel) {
-                    node = configOrNode;
-                }
-                else {
-                    node = new NodeModel_1.NodeModel(configOrNode);
-                }
-                // Validate
-                if ((_a = this.config.validation) === null || _a === void 0 ? void 0 : _a.strict) {
-                    const validation = this.validationEngine.validateNode(node);
-                    if (!validation.valid) {
-                        throw new Error(`Invalid node: ${(_b = validation.errors[0]) === null || _b === void 0 ? void 0 : _b.message}`);
-                    }
-                }
-                // Add via command
-                const command = new AddNodeCommand_1.AddNodeCommand(node);
-                yield this.commandManager.execute(command);
-                // Return the node that was actually added (might be deserialized)
-                return (this.diagram && this.diagram.getNode(node.id)) || node;
-            }));
-        });
-    }
-    /**
-     * Remove node
-     *
-     * Wave 14: async + awaited, mirroring removeGroup(). The execute() promise
-     * used to float — a command failure became an unhandled rejection (fatal
-     * under Node), and callers could not sequence on the removal completing.
-     */
-    removeNode(nodeId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const node = this.diagram.getNode(nodeId);
-            if (!node) {
-                throw new Error(`Node ${nodeId} not found`);
-            }
-            const command = new RemoveNodeCommand_1.RemoveNodeCommand(nodeId);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Wave 6 (Card 7): top up (or trim) the dynamic port groups on the nodes at
-     * either end of `link`.
-     *
-     * Runs through the COMMAND layer, so a spawned port is undoable and arrives
-     * with the same events and dirty-tracking as any other model change. Guarded
-     * against re-entry: an AddPortCommand does not itself add a link, but a host
-     * validator could, and a self-feeding allocator would be a delightful way to
-     * hang the app.
-     */
-    reconcileDynamicPorts(nodeIds) {
-        if (this.reconcilingDynamicPorts || !this.diagram)
-            return;
-        // The LINKS are the source of truth for "is this port free" — the port's
-        // own connection registry is derived state that `addLink()` never updates.
-        const links = this.diagram.getLinks();
-        const commands = [];
-        for (const nodeId of new Set(nodeIds)) {
-            const node = this.diagram.getNode(nodeId);
-            if (node)
-                commands.push(...(0, dynamic_ports_1.buildDynamicPortCommands)(node, links));
-        }
-        if (commands.length === 0)
-            return;
-        this.reconcilingDynamicPorts = true;
-        try {
-            for (const command of commands) {
-                // Port add/remove is synchronous; `execute` returns a promise only
-                // because the Command contract allows async ones. Nothing here awaits it,
-                // so the port is on the node by the time this returns — which is what the
-                // renderer, mid-frame, is entitled to assume.
-                void this.commandManager.execute(command);
-            }
-        }
-        finally {
-            this.reconcilingDynamicPorts = false;
-        }
-    }
-    /** The nodes a link touches — resolved by id, or by searching for its ports. */
-    reconcileDynamicPortsFor(link) {
-        var _a;
-        const diagram = this.diagram;
-        if (!diagram)
-            return;
-        const nodeIds = [];
-        for (const [nodeId, portId] of [
-            [link.sourceNodeId, link.sourcePortId],
-            [link.targetNodeId, link.targetPortId],
-        ]) {
-            if (nodeId) {
-                nodeIds.push(nodeId);
-            }
-            else if (portId) {
-                const owner = (_a = diagram.getNodeByPortId) === null || _a === void 0 ? void 0 : _a.call(diagram, portId);
-                if (owner)
-                    nodeIds.push(owner.id);
-            }
-        }
-        this.reconcileDynamicPorts(nodeIds);
-    }
-    /**
-     * Add link
-     */
-    addLink(config) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            return this.performanceMonitor.measure('addLink', () => tslib_1.__awaiter(this, void 0, void 0, function* () {
-                var _a;
-                // Check ports exist
-                const sourcePort = this.findPort(config.sourcePortId);
-                const targetPort = this.findPort(config.targetPortId);
-                if (!sourcePort || !targetPort) {
-                    throw new Error('Invalid ports');
-                }
-                const link = new LinkModel_1.LinkModel(config.sourcePortId, config.targetPortId, config.type);
-                // Validate
-                const validation = this.validationEngine.validateLink(link, this.diagram);
-                if (!validation.valid) {
-                    throw new Error(`Invalid link: ${(_a = validation.errors[0]) === null || _a === void 0 ? void 0 : _a.message}`);
-                }
-                // Add via command
-                const command = new AddLinkCommand_1.AddLinkCommand(link);
-                yield this.commandManager.execute(command);
-                // Return the link that was actually added (might be deserialized)
-                return (this.diagram && this.diagram.getLink(link.id)) || link;
-            }));
-        });
-    }
-    /**
-     * Remove link
-     *
-     * Wave 14: async + awaited, mirroring removeGroup() — see removeNode().
-     */
-    removeLink(linkId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const link = this.diagram.getLink(linkId);
-            if (!link) {
-                throw new Error(`Link ${linkId} not found`);
-            }
-            const command = new RemoveLinkCommand_1.RemoveLinkCommand(linkId);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Add group (Phase 1.6c)
-     */
-    addGroup(config) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            return this.performanceMonitor.measure('addGroup', () => tslib_1.__awaiter(this, void 0, void 0, function* () {
-                const group = new GroupModel_1.GroupModel(config);
-                // Add via command
-                const command = new basic_1.AddGroupCommand(group);
-                yield this.commandManager.execute(command);
-                // Return the group that was actually added
-                return (this.diagram && this.diagram.getGroup(group.id)) || group;
-            }));
-        });
-    }
-    /**
-     * Remove group (Phase 1.6c)
-     */
-    removeGroup(groupId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const group = this.diagram.getGroup(groupId);
-            if (!group) {
-                throw new Error(`Group ${groupId} not found`);
-            }
-            const command = new basic_1.RemoveGroupCommand(groupId);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Add entity to group (Phase 1.6c)
-     */
-    addToGroup(groupId, entityId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const command = new basic_1.AddToGroupCommand(groupId, entityId);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Remove entity from group (Phase 1.6c)
-     */
-    removeFromGroup(groupId, entityId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const command = new basic_1.RemoveFromGroupCommand(groupId, entityId);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Expand group (Phase 1.6c)
-     */
-    expandGroup(groupId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const command = new basic_1.ExpandGroupCommand(groupId);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Collapse group (Phase 1.6c)
-     */
-    collapseGroup(groupId, options) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const command = new basic_1.CollapseGroupCommand(groupId, options);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Get group by ID (Phase 1.6c)
-     */
-    getGroup(groupId) {
-        var _a;
-        return (_a = this.diagram) === null || _a === void 0 ? void 0 : _a.getGroup(groupId);
-    }
-    /**
-     * Get all groups (Phase 1.6c)
-     */
-    getGroups() {
-        var _a;
-        return ((_a = this.diagram) === null || _a === void 0 ? void 0 : _a.getGroups()) || [];
-    }
-    /**
-     * Set layout configuration on a group (Phase 1.7)
-     */
-    setLayout(groupId, layoutType, layoutConfig) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const group = this.diagram.getGroup(groupId);
-            if (!group) {
-                throw new Error(`Group ${groupId} not found`);
-            }
-            const command = new basic_2.SetLayoutCommand(groupId, layoutType, layoutConfig);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Clear layout configuration from a group (Phase 1.7)
-     */
-    clearLayout(groupId) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const group = this.diagram.getGroup(groupId);
-            if (!group) {
-                throw new Error(`Group ${groupId} not found`);
-            }
-            // Clear layout by setting to 'none' (this triggers a command internally through the model)
-            group.clearLayout();
-        });
-    }
-    /**
-     * Get layout configuration from a group (Phase 1.7)
-     */
-    getLayout(groupId) {
-        var _a;
-        const group = (_a = this.diagram) === null || _a === void 0 ? void 0 : _a.getGroup(groupId);
-        return group === null || group === void 0 ? void 0 : group.getLayout();
-    }
-    /**
-     * Set flex item configuration on a node (Phase 1.7)
-     */
-    setFlexItem(nodeId, flexConfig) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const node = this.diagram.getNode(nodeId);
-            if (!node) {
-                throw new Error(`Node ${nodeId} not found`);
-            }
-            const command = new basic_2.SetFlexItemCommand(nodeId, flexConfig);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Set grid item configuration on a node (Phase 1.7)
-     */
-    setGridItem(nodeId, gridConfig) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const node = this.diagram.getNode(nodeId);
-            if (!node) {
-                throw new Error(`Node ${nodeId} not found`);
-            }
-            const command = new basic_2.SetGridItemCommand(nodeId, gridConfig);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Copy selected entities to clipboard (Phase 1.8)
-     */
-    copy(options) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const command = new basic_3.CopyCommand(this.clipboardManager, options);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Paste entities from clipboard (Phase 1.8)
-     */
-    paste(options) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            if (!this.clipboardManager.hasData()) {
-                throw new Error('Clipboard is empty');
-            }
-            const command = new basic_3.PasteCommand(this.clipboardManager, options);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Duplicate selected entities (Phase 1.8)
-     */
-    duplicate(options) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            // Diagram selection first — a mouse click selects through
-            // diagram.selectNode() and never writes the store's set, so gating on the
-            // store alone made this helper throw for every mouse-selected node while
-            // DuplicateCommand itself (which checks both) would have succeeded.
-            const diagramSelection = this.diagram.getSelectedNodes();
-            const selectedNodeIds = this.store.get('selectedNodes');
-            if (diagramSelection.length === 0 && (!selectedNodeIds || selectedNodeIds.size === 0)) {
-                throw new Error('No nodes selected');
-            }
-            const command = new basic_3.DuplicateCommand(options);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Delete selected entities (Phase 1.8)
-     */
-    deleteSelection(options) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const selectedNodeIds = this.store.get('selectedNodes');
-            const selectedLinkIds = this.store.get('selectedLinks');
-            if ((!selectedNodeIds || selectedNodeIds.size === 0) &&
-                (!selectedLinkIds || selectedLinkIds.size === 0)) {
-                throw new Error('No entities selected');
-            }
-            const command = new basic_3.DeleteSelectionCommand(options);
-            yield this.commandManager.execute(command);
-        });
-    }
-    /**
-     * Get clipboard data (Phase 1.8)
-     */
-    getClipboardData() {
-        return this.clipboardManager.get();
-    }
-    /**
-     * Check if clipboard has data (Phase 1.8)
-     */
-    hasClipboardData() {
-        return this.clipboardManager.hasData();
-    }
-    /**
-     * Clear clipboard (Phase 1.8)
-     */
-    clearClipboard() {
-        this.clipboardManager.clear();
-    }
-    /**
-     * Get clipboard statistics (Phase 1.8)
-     */
-    getClipboardStats() {
-        return this.clipboardManager.getStats();
-    }
-    // ============================================================================
-    // Validation API (Phase 1 - Critical Fixes)
-    // ============================================================================
-    /**
-     * Validate the entire diagram
-     * @param options Validation options
-     * @returns Validation result with errors and warnings
-     */
-    validateDiagram(options) {
-        if (!this.diagram) {
-            return {
-                valid: false,
-                errors: [{
-                        path: 'diagram',
-                        message: 'No diagram loaded',
-                        code: 'NO_DIAGRAM',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        return this.validationEngine.validateDiagram(this.diagram, options);
-    }
-    /**
-     * Validate a specific node
-     * @param nodeId Node ID to validate
-     * @param options Validation options
-     * @returns Validation result with errors and warnings
-     */
-    validateNode(nodeId, options) {
-        if (!this.diagram) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `node.${nodeId}`,
-                        message: 'No diagram loaded',
-                        code: 'NO_DIAGRAM',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        const node = this.diagram.getNode(nodeId);
-        if (!node) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `node.${nodeId}`,
-                        message: `Node ${nodeId} not found`,
-                        code: 'NODE_NOT_FOUND',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        return this.validationEngine.validateNode(node, options);
-    }
-    /**
-     * Validate a specific link
-     * @param linkId Link ID to validate
-     * @param options Validation options
-     * @returns Validation result with errors and warnings
-     */
-    validateLink(linkId, options) {
-        if (!this.diagram) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `link.${linkId}`,
-                        message: 'No diagram loaded',
-                        code: 'NO_DIAGRAM',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        const link = this.diagram.getLink(linkId);
-        if (!link) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `link.${linkId}`,
-                        message: `Link ${linkId} not found`,
-                        code: 'LINK_NOT_FOUND',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        return this.validationEngine.validateLink(link, this.diagram, options);
-    }
-    /**
-     * Validate a specific port
-     * @param portId Port ID to validate
-     * @param nodeId Node ID containing the port
-     * @param options Validation options
-     * @returns Validation result with errors and warnings
-     */
-    validatePort(portId, nodeId, options) {
-        if (!this.diagram) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `node.${nodeId}.port.${portId}`,
-                        message: 'No diagram loaded',
-                        code: 'NO_DIAGRAM',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        const node = this.diagram.getNode(nodeId);
-        if (!node) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `node.${nodeId}.port.${portId}`,
-                        message: `Node ${nodeId} not found`,
-                        code: 'NODE_NOT_FOUND',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        const port = node.getPorts().find(p => p.id === portId);
-        if (!port) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `node.${nodeId}.port.${portId}`,
-                        message: `Port ${portId} not found`,
-                        code: 'PORT_NOT_FOUND',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        return this.validationEngine.validatePort(port, node, options);
-    }
-    /**
-     * Validate layout configuration for a group (Phase 3 - Layout validation)
-     */
-    validateLayout(groupId, options) {
-        if (!this.diagram) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `group.${groupId}.layout`,
-                        message: 'No diagram loaded',
-                        code: 'NO_DIAGRAM',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        const group = this.diagram.getGroup(groupId);
-        if (!group) {
-            return {
-                valid: false,
-                errors: [{
-                        path: `group.${groupId}.layout`,
-                        message: `Group ${groupId} not found`,
-                        code: 'GROUP_NOT_FOUND',
-                        severity: 'error'
-                    }],
-                warnings: []
-            };
-        }
-        return this.validationEngine.validateLayout(group, this.diagram, options);
-    }
-    /**
-     * Register a node type definition
-     * @param definition Node type definition
-     */
-    registerNodeType(definition) {
-        this.typeRegistry.registerNodeType(definition);
-    }
-    /**
-     * Register a port type definition
-     * @param definition Port type definition
-     */
-    registerPortType(definition) {
-        this.typeRegistry.registerPortType(definition);
-    }
-    /**
-     * Register a link type definition
-     * @param definition Link type definition
-     */
-    registerLinkType(definition) {
-        this.typeRegistry.registerLinkType(definition);
-    }
-    /**
-     * Register a group type definition (Phase 2 - Group validation)
-     * @param definition Group type definition
-     */
-    registerGroupType(definition) {
-        this.typeRegistry.registerGroupType(definition);
-    }
-    /**
-     * Enable real-time validation
-     */
-    enableRealTimeValidation() {
-        this.validationEngine.enableRealTimeValidation();
-    }
-    /**
-     * Disable real-time validation
-     */
-    disableRealTimeValidation() {
-        this.validationEngine.disableRealTimeValidation();
-    }
-    /**
-     * Check if real-time validation is enabled
-     */
-    isRealTimeValidationEnabled() {
-        return this.validationEngine.isRealTimeValidationEnabled();
-    }
-    // ============================================================================
-    // End Validation API
-    // ============================================================================
-    /**
-     * Select nodes
-     */
-    selectNodes(nodeIds) {
-        const selectedNodes = new Set(nodeIds);
-        this.store.set('selectedNodes', selectedNodes);
-        // Update node states
-        if (this.diagram) {
-            this.diagram.getNodes().forEach((node) => {
-                node.setState({ selected: selectedNodes.has(node.id) });
-            });
-        }
-        this.eventBus.emit('selection:changed', { nodes: nodeIds });
-    }
-    /**
-     * Select links
-     */
-    selectLinks(linkIds) {
-        const selectedLinks = new Set(linkIds);
-        this.store.set('selectedLinks', selectedLinks);
-        // Update link states
-        if (this.diagram) {
-            this.diagram.getLinks().forEach((link) => {
-                link.setState(selectedLinks.has(link.id) ? 'selected' : 'default');
-            });
-        }
-        this.eventBus.emit('selection:changed', { links: linkIds });
-    }
-    /**
-     * Clear selection
-     */
-    clearSelection() {
-        this.selectNodes([]);
-        this.selectLinks([]);
-        this.eventBus.emit('selection:cleared');
-    }
-    /**
-     * Undo
-     */
-    undo() {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            yield this.commandManager.undo();
-        });
-    }
-    /**
-     * Redo
-     */
-    redo() {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            yield this.commandManager.redo();
-        });
-    }
-    /**
-     * Can undo
-     */
-    canUndo() {
-        return this.commandManager.canUndo();
-    }
-    /**
-     * Can redo
-     */
-    canRedo() {
-        return this.commandManager.canRedo();
-    }
-    /**
-     * Validate diagram
-     */
-    validate() {
-        if (!this.diagram) {
-            return {
-                valid: true,
-                errors: [],
-                warnings: [],
-            };
-        }
-        return this.validationEngine.validateDiagram(this.diagram);
-    }
-    /**
-     * Serialize diagram (with mode)
-     */
-    serialize() {
-        if (!this.diagram) {
-            return null;
-        }
-        const serialized = this.serializer.serialize(this.diagram);
-        // Include current mode
-        serialized.mode = this.modeManager.serialize();
-        return serialized;
-    }
-    /**
-     * Deserialize diagram (with mode)
-     */
-    deserialize(data, options) {
-        const diagram = this.serializer.deserialize(data, options);
-        this.setDiagram(diagram);
-        // Restore mode if present
-        this.modeManager.restore(data.mode);
-        return diagram;
-    }
-    /**
-     * Load diagram from JSON (with mode)
-     */
-    loadFromJSON(json, options) {
-        const data = typeof json === 'string' ? JSON.parse(json) : json;
-        return this.deserialize(data, options);
-    }
-    /**
-     * Save diagram to JSON
-     */
-    saveToJSON() {
-        const data = this.serialize();
-        return data ? JSON.stringify(data, null, 2) : null;
-    }
-    /**
-     * Register a plugin AND bring it to life.
-     *
-     * `PluginManager.register()` only RECORDS a plugin; `install()` and
-     * `activate()` are separate steps. Calling register alone — which both of
-     * this engine's entry points used to do — left every plugin permanently
-     * inert: its hooks never fired, though `getPlugin()` happily returned it.
-     * "Register a plugin" can only sensibly mean "make it run", so this drives
-     * the full lifecycle. A plugin that throws is reported and skipped rather
-     * than taking the host down with it.
-     */
-    registerPlugin(plugin) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            var _a, _b;
-            const name = (_a = plugin.metadata) === null || _a === void 0 ? void 0 : _a.name;
-            this.pluginManager.register(plugin);
-            if (!name)
-                return;
-            try {
-                yield this.pluginManager.install(name);
-                yield this.pluginManager.activate(name);
-            }
-            catch (error) {
-                (_b = this.eventBus) === null || _b === void 0 ? void 0 : _b.emit('plugin:error', { name, error });
-            }
-        });
-    }
-    /**
-     * Get plugin
-     */
-    getPlugin(name) {
-        return this.pluginManager.get(name);
-    }
-    /**
-     * Set viewport
-     */
-    setViewport(viewport) {
-        this.store.set('viewport', viewport);
-        this.eventBus.emit('viewport:changed', viewport);
-    }
-    /**
-     * Set zoom
-     */
-    setZoom(zoom) {
-        const clampedZoom = Math.max(0.1, Math.min(5, zoom));
-        this.store.set('zoom', clampedZoom);
-        this.eventBus.emit('viewport:zoomed', clampedZoom);
-    }
-    /**
-     * Get performance report
-     */
-    getPerformanceReport() {
-        return this.performanceMonitor.getReport();
-    }
-    // ============================================================================
-    // Mode Management (Delegation to ModeManager)
-    // ============================================================================
-    /**
-     * Get current diagram mode
-     */
-    getMode() {
-        return this.modeManager.getMode();
-    }
-    /**
-     * Set diagram mode
-     */
-    setMode(mode) {
-        this.modeManager.setMode(mode);
-        this.syncReadonlyLock();
-    }
-    /**
-     * Wave 9 — Card 7. Push the mode's read-only verdict down onto the DOCUMENT.
-     *
-     * Before this wave `DiagramMode.VIEW` / `PRESENTATION` and `isReadOnlyMode()`
-     * existed, were documented as "all editing disabled" — and gated NOTHING. Not a
-     * command, not a model mutator, not the event binder. They were a boolean nobody
-     * asked. This is the line that makes the mode real: the model holds the lock, and
-     * the model is where mutation actually happens.
-     *
-     * Call it after any mode change, and whenever a diagram is attached (a diagram
-     * loaded into an engine that is ALREADY in presentation mode must come up locked,
-     * or read-only would depend on the order the host happened to call things in).
-     */
-    syncReadonlyLock() {
-        var _a;
-        (_a = this.diagram) === null || _a === void 0 ? void 0 : _a.setReadonly(this.modeManager.isReadOnlyMode());
-    }
-    /**
-     * Check if in designer mode
-     */
-    isDesignerMode() {
-        return this.modeManager.isDesignerMode();
-    }
-    /**
-     * Check if in running mode
-     */
-    isRunningMode() {
-        return this.modeManager.isRunningMode();
-    }
-    /**
-     * Check if in view mode
-     */
-    isViewMode() {
-        return this.modeManager.isViewMode();
-    }
-    /**
-     * Check if in debug mode
-     */
-    isDebugMode() {
-        return this.modeManager.isDebugMode();
-    }
-    /**
-     * Check if in presentation mode
-     */
-    isPresentationMode() {
-        return this.modeManager.isPresentationMode();
-    }
-    /**
-     * Check if in read-only mode (any mode except designer)
-     */
-    isReadOnlyMode() {
-        return this.modeManager.isReadOnlyMode();
-    }
-    /**
-     * Add mode transition guard
-     */
-    addModeGuard(name, guard) {
-        this.modeManager.addModeGuard(name, guard);
-    }
-    /**
-     * Remove mode transition guard
-     */
-    removeModeGuard(name) {
-        this.modeManager.removeModeGuard(name);
-    }
-    /**
-     * Clear all mode transition guards
-     */
-    clearModeGuards() {
-        this.modeManager.clearModeGuards();
-    }
-    /**
-     * Configure viewport settings for specific mode
-     */
-    configureModeViewport(mode, settings) {
-        this.modeManager.configureModeViewport(mode, settings);
-    }
-    /**
-     * Get viewport settings for specific mode
-     */
-    getModeViewportSettings(mode) {
-        return this.modeManager.getModeViewportSettings(mode);
-    }
-    /**
-     * Get mode history
-     */
-    getModeHistory() {
-        return this.modeManager.getModeHistory();
-    }
-    /**
-     * Clear mode history
-     */
-    clearModeHistory() {
-        this.modeManager.clearModeHistory();
-    }
-    /**
-     * Navigate to previous mode
-     */
-    previousMode() {
-        this.modeManager.previousMode();
-    }
-    /**
-     * Navigate to next mode
-     */
-    nextMode() {
-        this.modeManager.nextMode();
-    }
-    /**
-     * Push mode onto stack (save current, switch to new)
-     */
-    pushMode(mode) {
-        this.modeManager.pushMode(mode);
-    }
-    /**
-     * Pop mode from stack (return to previous)
-     */
-    popMode() {
-        this.modeManager.popMode();
-    }
-    /**
-     * Get mode analytics
-     */
-    getModeAnalytics() {
-        return this.modeManager.getModeAnalytics();
-    }
-    /**
-     * Register before mode change hook
-     */
-    beforeModeChange(hook) {
-        return this.modeManager.beforeModeChange(hook);
-    }
-    /**
-     * Register after mode change hook
-     */
-    afterModeChange(hook) {
-        return this.modeManager.afterModeChange(hook);
-    }
-    // wave14/model — `getNodeBehaviorForMode` DELETED along with NodeModel.behaviorOverrides.
-    // It had no caller outside its own spec; the real mode enforcement is the wave-9
-    // ReadonlyLock on the model (see models/readonly-lock.ts), which every mutator actually
-    // consults. (Its sibling getLinkBehaviorForMode below is equally caller-less — left in
-    // place because it is outside this card's chain, flagged for a future sweep.)
-    /**
-     * Get link behavior adjusted for current mode
-     */
-    getLinkBehaviorForMode(baseBehavior) {
-        const defaults = {
-            deletable: true,
-            selectable: true,
-        };
-        // Merge base behavior with defaults
-        const merged = Object.assign(Object.assign({}, defaults), baseBehavior);
-        // Apply mode restrictions
-        const currentMode = this.modeManager.getMode();
-        switch (currentMode) {
-            case DiagramMode_1.DiagramMode.DESIGNER:
-                // In designer mode, respect all base behavior settings
-                return merged;
-            case DiagramMode_1.DiagramMode.RUNNING:
-            case DiagramMode_1.DiagramMode.VIEW:
-            case DiagramMode_1.DiagramMode.DEBUG:
-            case DiagramMode_1.DiagramMode.PRESENTATION:
-                // In all other modes, disable editing but keep selectable
-                return {
-                    deletable: false,
-                    selectable: merged.selectable,
-                };
-            default:
-                return merged;
-        }
-    }
-    /**
-     * Initialize the engine
-     */
-    initialize() {
-        if (this.initialized) {
-            return;
-        }
-        this.initialized = true;
-        this.destroyed = false;
-        this.eventBus.emit('engine:initialized');
-    }
-    /**
-     * Get the store
-     */
-    getStore() {
-        return this.store;
-    }
-    /**
-     * Subscribe to events
-     */
-    on(event, listener) {
-        this.eventBus.on(event, listener);
-    }
-    /**
-     * Unsubscribe from events
-     */
-    off(event, listener) {
-        this.eventBus.off(event, listener);
-    }
-    /**
-     * Destroy engine
-     */
-    destroy() {
-        if (this.destroyed)
-            return;
-        this.destroyed = true;
-        // Emit destroyed event BEFORE removing listeners
-        this.eventBus.emit('engine:destroyed');
-        // Cleanup
-        if (this.diagram) {
-            this.detachDiagram(this.diagram);
-        }
-        // Reset mode through ModeManager
-        this.modeManager.restore(DiagramMode_1.DiagramMode.DESIGNER);
-        this.initialized = false;
-        // Note: PluginManager doesn't have destroy method yet
-        // this.pluginManager.destroy();
-        this.eventBus.removeAllListeners();
-        this.store.reset();
-    }
-    /**
-     * Configure systems
-     */
-    configureSystems() {
-        var _a, _b, _c;
-        // Configure command manager
-        if ((_a = this.config.history) === null || _a === void 0 ? void 0 : _a.maxCommands) {
-            this.commandManager.setMaxHistorySize(this.config.history.maxCommands);
-        }
-        // Configure validation
-        if ((_b = this.config.validation) === null || _b === void 0 ? void 0 : _b.realTime) {
-            this.validationEngine.enableRealTimeValidation();
-        }
-        // Configure performance monitoring
-        if ((_c = this.config.performance) === null || _c === void 0 ? void 0 : _c.warnThreshold) {
-            this.performanceMonitor.setWarnThreshold(this.config.performance.warnThreshold);
-        }
-    }
-    /**
-     * Install plugins
-     */
-    installPlugins() {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (this.config.plugins) {
-                // Same contract as registerPlugin(): a configured plugin is a LIVE one.
-                for (const plugin of this.config.plugins) {
-                    yield this.registerPlugin(plugin);
-                }
-            }
-        });
-    }
-    /**
-     * Register a node as an obstacle in the routing engine
-     */
-    registerNodeAsObstacle(node) {
-        const obstacle = {
-            id: node.id,
-            x: node.position.x,
-            y: node.position.y,
-            width: node.size.width,
-            height: node.size.height,
-        };
-        this.routingEngine.addObstacle(obstacle);
-    }
-    /**
-     * Wave 5 (Edge routing) — Card 6: reconcile the shared ObstacleMap with the
-     * diagram's GROUP state, idempotently:
-     *
-     *   - a COLLAPSED group (with geometry) is ONE solid obstacle;
-     *   - members hidden under a collapsed group (at any depth) are NOT obstacles
-     *     — they are not visible, and routing around invisible things produces
-     *     inexplicable detours;
-     *   - expanding restores the members and removes the group block.
-     *
-     * Runs on every group add/remove/collapse/expand. Public so the grouping
-     * feature (which owns collapse SEMANTICS but not the ObstacleMap) can force a
-     * reconcile after batch operations.
-     */
-    refreshGroupObstacles() {
-        if (!this.diagram)
-            return;
-        const groups = this.diagram.getGroups();
-        // ids of members hidden under a collapsed group at any depth
-        const hidden = new Set();
-        for (const g of groups) {
-            // a group's members are hidden if IT or any of its ancestors is collapsed
-            let cur = g;
-            let effectiveCollapsed = false;
-            const guard = new Set();
-            while (cur && !guard.has(cur.id)) {
-                guard.add(cur.id);
-                if (cur.isCollapsed) {
-                    effectiveCollapsed = true;
-                    break;
-                }
-                cur = cur.parentGroupId ? this.diagram.getGroup(cur.parentGroupId) : undefined;
-            }
-            if (!effectiveCollapsed)
-                continue;
-            for (const memberId of g.members)
-                hidden.add(memberId);
-        }
-        // hidden members: out of the map; visible ones: (re)registered
-        for (const node of this.diagram.getNodes()) {
-            if (hidden.has(node.id)) {
-                this.routingEngine.removeObstacle(node.id);
-            }
-            else {
-                this.routingEngine.updateObstacle({
-                    id: node.id,
-                    x: node.position.x,
-                    y: node.position.y,
-                    width: node.size.width,
-                    height: node.size.height,
-                    kind: 'node',
-                });
-            }
-        }
-        // group blocks: only VISIBLE collapsed groups block (a collapsed group
-        // nested inside another collapsed group is itself hidden)
-        for (const g of groups) {
-            const rect = this.groupObstacleRect(g);
-            if (g.isCollapsed && !hidden.has(g.id) && rect) {
-                this.routingEngine.updateObstacle(Object.assign(Object.assign({ id: g.id }, rect), { kind: 'group' }));
-            }
-            else {
-                this.routingEngine.removeObstacle(g.id);
-            }
-        }
-    }
-    groupObstacleRect(g) {
-        if (g.size) {
-            return { x: g.position.x, y: g.position.y, width: g.size.width, height: g.size.height };
-        }
-        if (g.bounds)
-            return Object.assign({}, g.bounds);
-        return null;
-    }
-    /**
-     * Update a node's obstacle when it moves or resizes
-     * Also invalidates all links so they recalculate paths with new obstacle positions
-     */
-    updateNodeObstacle(node) {
-        const obstacle = {
-            id: node.id,
-            x: node.position.x,
-            y: node.position.y,
-            width: node.size.width,
-            height: node.size.height,
-        };
-        this.routingEngine.updateObstacle(obstacle);
-        // NOTE: this method used to also mark EVERY link dirty "so they recalculate"
-        // — a sledgehammer that was dead code while the subscription bug hid it
-        // (see attachDiagram) and became a live perf regression the moment the fix
-        // woke it up: one node move invalidated every link VNode in the diagram.
-        // Link invalidation is owned by the renderer's per-frame route pre-pass +
-        // markLinksWhoseFrameChanged (wave 4), which re-renders exactly the links
-        // whose GEOMETRY actually changed.
-    }
-    /**
-     * Unregister a node obstacle when node is removed
-     */
-    unregisterNodeObstacle(nodeId) {
-        this.routingEngine.removeObstacle(nodeId);
-    }
-    /**
-     * Attach diagram
-     */
-    attachDiagram(diagram) {
-        // Subscribe to diagram events. Every subscription returns a disposer which
-        // we store so detachDiagram can unsubscribe the engine's own listeners
-        // without accumulating duplicates across attach/detach cycles.
-        this.diagramDisposers.push(diagram.on('node:added', (node) => {
-            this.eventBus.emit('node:added', node);
-            // Register node as obstacle for routing
-            this.registerNodeAsObstacle(node);
-            // Listen for node position/size changes
-            this.diagramDisposers.push(
-            // BUGFIX (wave 5, found by the nodes agent): NodeModel emits
-            // `change:position` (via trackChange) — never bare `position`. This
-            // listener had NEVER fired, so the shared ObstacleMap went stale on
-            // every node move; only the renderer's per-request obstacle list kept
-            // visible routing honest, while the a-star/dijkstra/visibility
-            // adapters — which read the SHARED map — routed around yesterday's
-            // positions.
-            node.on('change:position', () => {
-                this.updateNodeObstacle(node);
-            }));
-            this.diagramDisposers.push(node.on('change:size', () => {
-                this.updateNodeObstacle(node);
-            }));
-        }));
-        this.diagramDisposers.push(diagram.on('node:removed', (node) => {
-            this.eventBus.emit('node:removed', node);
-            // Unregister node obstacle
-            this.unregisterNodeObstacle(node.id);
-        }));
-        this.diagramDisposers.push(diagram.on('link:added', (link) => {
-            this.eventBus.emit('link:added', link);
-            // Wave 6 (Card 7): wiring up the last free port in a dynamic group must
-            // conjure the next one. This is the whole feature — a `dynamic` group
-            // whose allocator never runs is just a group.
-            this.reconcileDynamicPortsFor(link);
-        }));
-        // Wave 5 — Card 6: group state drives the obstacle map. `group:added` also
-        // subscribes to that group's own collapse/expand emitter (DiagramModel does
-        // not forward those); existing groups are wired below.
-        const wireGroup = (group) => {
-            this.diagramDisposers.push(group.on('collapsed', () => this.refreshGroupObstacles()));
-            this.diagramDisposers.push(group.on('expanded', () => this.refreshGroupObstacles()));
-        };
-        this.diagramDisposers.push(diagram.on('group:added', (group) => {
-            wireGroup(group);
-            this.refreshGroupObstacles();
-        }));
-        this.diagramDisposers.push(diagram.on('group:removed', () => this.refreshGroupObstacles()));
-        this.diagramDisposers.push(diagram.on('group:changed', () => this.refreshGroupObstacles()));
-        diagram.getGroups().forEach(wireGroup);
-        if (diagram.getGroups().length > 0)
-            this.refreshGroupObstacles();
-        this.diagramDisposers.push(diagram.on('link:removed', (link) => {
-            this.eventBus.emit('link:removed', link);
-            // Unwiring frees a port, which may leave the group with a SURPLUS of
-            // spares — the allocator retires the ones it spawned.
-            this.reconcileDynamicPortsFor(link);
-        }));
-        // Register all existing nodes as obstacles
-        diagram.getNodes().forEach((node) => {
-            this.registerNodeAsObstacle(node);
-            // Listen for node position/size changes
-            this.diagramDisposers.push(node.on('change:position', () => {
-                this.updateNodeObstacle(node);
-            }));
-            this.diagramDisposers.push(node.on('change:size', () => {
-                this.updateNodeObstacle(node);
-            }));
-        });
-    }
-    /**
-     * Detach diagram
-     */
-    detachDiagram(diagram) {
-        // Unregister all node obstacles from routing engine so the old diagram's
-        // nodes don't remain as obstacles affecting the newly attached diagram.
-        // This only touches the routing engine's obstacle registry, not the diagram.
-        diagram.getNodes().forEach((node) => {
-            this.unregisterNodeObstacle(node.id);
-        });
-        // Unsubscribe the engine's own listeners that were registered in
-        // attachDiagram. We deliberately do NOT clear() or otherwise mutate the old
-        // diagram: it must stay fully intact so it can be re-attached later with all
-        // of its nodes and links preserved. Disposing the stored handlers also
-        // prevents duplicate handlers from accumulating across attach/detach cycles.
-        for (const dispose of this.diagramDisposers) {
-            dispose();
-        }
-        this.diagramDisposers = [];
-    }
-    /**
-     * Find port in diagram
-     */
-    findPort(portId) {
-        if (!this.diagram) {
-            return undefined;
-        }
-        for (const node of this.diagram.getNodes()) {
-            const port = node.getPort(portId);
-            if (port) {
-                return port;
-            }
-        }
-        return undefined;
-    }
-    /**
-     * Get node that owns a port (Phase 1.6b)
-     */
-    getNodeForPort(portId) {
-        if (!this.diagram) {
-            return undefined;
-        }
-        for (const node of this.diagram.getNodes()) {
-            if (node.getPort(portId)) {
-                return node;
-            }
-        }
-        return undefined;
-    }
-    /**
-     * Get port position in global coordinates (Phase 1.6b)
-     * @param portId Port ID
-     * @returns Global position of the port
-     */
-    getPortGlobalPosition(portId) {
-        var _a, _b, _c, _d;
-        const port = this.findPort(portId);
-        if (!port) {
-            return { x: 0, y: 0 };
-        }
-        const node = this.getNodeForPort(portId);
-        if (!node) {
-            return { x: 0, y: 0 };
-        }
-        // Port position is normalized (0-1) relative to node size
-        const localPortPos = {
-            x: ((_b = (_a = port.position) === null || _a === void 0 ? void 0 : _a.x) !== null && _b !== void 0 ? _b : 0.5) * node.size.width,
-            y: ((_d = (_c = port.position) === null || _c === void 0 ? void 0 : _c.y) !== null && _d !== void 0 ? _d : 0.5) * node.size.height,
-        };
-        // Transform to global using node's global position
-        const nodeGlobalPos = node.getGlobalPosition();
-        return {
-            x: nodeGlobalPos.x + localPortPos.x,
-            y: nodeGlobalPos.y + localPortPos.y,
-        };
-    }
-    /**
-     * Compute link path using specified routing algorithm (Phase 1.6b)
-     * @param linkId Link ID
-     * @param algorithm Routing algorithm to use
-     * @param options Routing options
-     * @returns Array of points forming the path
-     */
-    computeLinkPath(linkId, algorithm, options = {}) {
-        var _a, _b;
-        const link = (_a = this.diagram) === null || _a === void 0 ? void 0 : _a.getLink(linkId);
-        if (!link) {
-            return [];
-        }
-        // Build obstacle map (excluding source and target nodes)
-        const sourceNode = this.getNodeForPort(link.sourcePortId);
-        const targetNode = this.getNodeForPort(link.targetPortId);
-        const excludeIds = [sourceNode === null || sourceNode === void 0 ? void 0 : sourceNode.id, targetNode === null || targetNode === void 0 ? void 0 : targetNode.id].filter((id) => id !== undefined);
-        const obstacleMap = ObstacleMapBuilder_1.ObstacleMapBuilder.fromDiagramExcluding(this.diagram, excludeIds, { margin: (_b = options.obstacleMargin) !== null && _b !== void 0 ? _b : 5 });
-        // Get port positions (in global coordinates)
-        const start = this.getPortGlobalPosition(link.sourcePortId);
-        const end = this.getPortGlobalPosition(link.targetPortId);
-        // Route based on algorithm
-        let points;
-        switch (algorithm) {
-            case 'straight': {
-                const router = new StraightRouter_1.StraightRouter();
-                const result = router.route({ start, end, obstacles: obstacleMap.getObstacles(), options });
-                points = (result === null || result === void 0 ? void 0 : result.points) || [start, end];
-                break;
-            }
-            case 'orthogonal': {
-                const router = new OrthogonalRouter_1.OrthogonalRouter();
-                const result = router.route({ start, end, obstacles: obstacleMap.getObstacles(), options });
-                points = (result === null || result === void 0 ? void 0 : result.points) || [start, end];
-                break;
-            }
-            case 'astar': {
-                const router = new AStarRouter_1.AStarRouter(obstacleMap, options);
-                points = router.route(start, end);
-                // Fallback to direct path if no path found
-                if (points.length === 0) {
-                    points = [start, end];
-                }
-                break;
-            }
-            case 'dijkstra': {
-                const router = new DijkstraRouter_1.DijkstraRouter(obstacleMap, options);
-                points = router.route(start, end);
-                // Fallback to direct path if no path found
-                if (points.length === 0) {
-                    points = [start, end];
-                }
-                break;
-            }
-            case 'visibility': {
-                const router = new VisibilityGraphRouter_1.VisibilityGraphRouter(obstacleMap, options);
-                points = router.route(start, end);
-                // Fallback to direct path if no path found
-                if (points.length === 0) {
-                    points = [start, end];
-                }
-                break;
-            }
-            default:
-                throw new Error(`Unknown routing algorithm: ${algorithm}`);
-        }
-        return points;
-    }
-    /**
-     * Generate link path using RoutingEngine with obstacle avoidance
-     * This ensures the final link respects the routing algorithm setting (A*, none, etc.)
-     */
-    generateLinkPathWithRouting(link, sourcePos, targetPos, sourceDirection, targetDirection, sourceNode, targetNode) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            // Get obstacles from diagram (INCLUDE ALL nodes, even source and target)
-            // The routing algorithm uses gap offset to ensure paths start/end outside node boundaries
-            const obstacles = [];
-            if (this.diagram) {
-                this.diagram.getNodes().forEach(node => {
-                    // Include ALL nodes as obstacles - the gap offset ensures we start/end outside
-                    obstacles.push({
-                        id: node.id,
-                        x: node.position.x,
-                        y: node.position.y,
-                        width: node.size.width,
-                        height: node.size.height,
-                    });
-                });
-            }
-            // Use the routing engine's default algorithm
-            const algorithm = this.routingEngine.getDefaultAlgorithm();
-            // Route the path with obstacle avoidance
-            // IMPORTANT: avoidObstacles should be based on whether obstacles exist, not on the algorithm
-            // - 'orthogonal' algorithm with avoidObstacles=true uses A* with orthogonal-only movement
-            // - 'a-star', 'dijkstra', etc. also use obstacle avoidance
-            // - 'straight' never avoids obstacles (direct line)
-            const shouldAvoidObstacles = obstacles.length > 0 && algorithm !== 'straight';
-            const routedPath = yield this.routingEngine.routeAsync({
-                start: sourcePos,
-                end: targetPos,
-                sourceDirection,
-                targetDirection,
-                obstacles,
-                options: {
-                    algorithm,
-                    avoidObstacles: shouldAvoidObstacles,
-                    obstacleMargin: 20,
-                    gridSize: 10, // Grid size for A* pathfinding
-                }
-            });
-            // Set the link points from the routed path.
-            // Wave 9 — Card 7: a SYSTEM write. These points are DERIVED from geometry the
-            // document already has; a read-only diagram must still route its links or it
-            // renders with no path at all. Not reachable from user input.
-            if (routedPath && routedPath.points.length > 0) {
-                const points = routedPath.points;
-                this.diagram
-                    ? this.diagram.runSystemWrite(() => link.setPoints(points))
-                    : link.setPoints(points);
-            }
-            else {
-                // Fallback to simple path generation if routing failed
-                link.generatePath(sourcePos, targetPos, sourceDirection, targetDirection);
-            }
-        });
-    }
-    /**
-     * Set layout service for diagram layouts
-     *
-     * @param service - Layout service instance
-     */
-    setLayoutService(service) {
-        this.layoutService = service;
-    }
-    /**
-     * The named-algorithm registry, with the built-ins already registered.
-     *
-     * THE BUG THIS CLOSES: `applyLayout()` below requires `setLayoutService()` —
-     * and NOTHING in the codebase ever called it (the only mention is a doc comment
-     * in layout/index.ts). So dagre, ELK, force, spectral and community — thousands
-     * of lines, several of them untested — were UNREACHABLE from the engine. That
-     * is the whole "auto-layout is fragmented" finding. Layout now works out of the
-     * box, with no setup call.
-     */
-    getLayoutRegistry() {
-        if (!this._layoutRegistry) {
-            // ONE factory, shared with the preset applicator: adapters, then the Card-2
-            // portfolio, then our layered engine, then the auto-selector (which takes the
-            // registry, so its candidate pool is whatever is actually registered).
-            this._layoutRegistry = (0, layout_registry_1.createDefaultLayoutRegistry)();
-        }
-        return this._layoutRegistry;
-    }
-    /**
-     * Lay out the whole diagram.
-     *
-     *     await engine.layout('dagre', { direction: 'LR' });
-     *
-     * DETERMINISTIC and IDEMPOTENT: the same graph and seed produce byte-identical
-     * coordinates, and running it twice changes nothing the second time. (The seed
-     * defaults to a fixed constant, so an author who never thinks about seeds still
-     * gets the same picture on every reload; randomness is opt-in.)
-     *
-     * NOT to be confused with `DiagramModel.getLayoutManager()`, which answers a
-     * DIFFERENT question — "where should this ONE newly-added node go?" — and is a
-     * placement strategy, not a graph layout. The audit called them "two parallel
-     * stacks" and asked for them to be merged; they are not parallel, and merging
-     * them would force a single-node placer to pretend it can lay out a graph.
-     */
-    layout() {
-        return tslib_1.__awaiter(this, arguments, void 0, function* (name = layout_registry_1.DEFAULT_LAYOUT_NAME, options = {}) {
-            var _a, _b;
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            const registered = this.getLayoutRegistry().get(name);
-            if (!registered) {
-                const available = this.getLayoutRegistry().names().join(', ');
-                throw new Error(`Unknown layout '${name}'. Registered layouts: ${available}`);
-            }
-            const seed = (_a = options.seed) !== null && _a !== void 0 ? _a : rng_1.DEFAULT_LAYOUT_SEED;
-            // Snapshot BEFORE any positions are committed: every return path below must
-            // invalidate the routed polyline of links whose endpoints moved. See
-            // invalidateStaleLinkRoutes for why leaving them is a real, observed bug.
-            const positionsBeforeLayout = this.snapshotNodePositions();
-            // Wave 7 Card 4 — nested container layout. On by default whenever the
-            // diagram has containers, because the flat path is not just worse there, it
-            // is WRONG: it interleaves members of different groups and never updates a
-            // single group frame, so every container is left behind pointing at where
-            // its members used to be. Opt out with `nested: false`.
-            const hasGroups = this.diagram.getGroups().length > 0;
-            if (((_b = options.nested) !== null && _b !== void 0 ? _b : hasGroups) && hasGroups) {
-                const result = yield new CompoundLayoutService_1.CompoundLayoutService(this.diagram, {
-                    defaultAlgorithm: name,
-                    adapters: this.getLayoutRegistry().adapters(),
-                    layoutTopLevel: true,
-                    defaultPadding: options.containerPadding,
-                    gridGap: options.groupSpacing,
-                    layoutOptions: Object.assign(Object.assign({}, options), { seed }),
-                }).layout();
-                // CompoundLayoutService commits through setPosition/setFrame as it goes
-                // (it has to — each level reads the geometry the level below produced).
-                this.invalidateStaleLinkRoutes(positionsBeforeLayout);
-                return {
-                    nodePositions: result.nodePositions,
-                    bounds: result.bounds,
-                    metadata: {
-                        algorithm: name,
-                        executionTime: 0,
-                        nested: true,
-                        containersLaidOut: result.laidOut,
-                        containersSkipped: result.skipped,
-                        containersCollapsed: result.collapsed,
-                    },
-                    algorithm: name,
-                    seed,
-                    // Card 3's run-status fields. A nested layout is a complete, synchronous
-                    // walk of the container tree — it is never cut short, so it reports itself
-                    // honestly as a finished single-pass run rather than leaving the caller to
-                    // guess from `undefined`.
-                    partial: false,
-                    iteration: 1,
-                    totalIterations: 1,
-                };
-            }
-            // ---- the flat path -----------------------------------------------------
-            //
-            // Card 3 routes it through the layout HOST, which runs the algorithm inline
-            // through the very same message loop a worker would run — so there is no second
-            // code path to drift, and a test proves the two produce byte-identical
-            // coordinates. (This replaces the direct runLayout() call: runLayout remains the
-            // shared apply-and-commit path used by the preset applicator, and the host
-            // commits through the same setPosition() route.)
-            // A hand-rolled RegisteredLayout is an opaque closure over a DiagramModel.
-            // A closure cannot cross a thread boundary, so it runs inline — not a
-            // policy, just physics. Every built-in exposes its adapter and takes the
-            // worker path below.
-            if (!registered.adapter) {
-                const result = yield registered.apply(this.diagram, Object.assign(Object.assign({}, options), { seed }));
-                this.commitLayoutPositions(result.nodePositions);
-                this.invalidateStaleLinkRoutes(positionsBeforeLayout);
-                return Object.assign(Object.assign({}, result), { algorithm: name, seed, partial: false, iteration: 1, totalIterations: 1 });
-            }
-            // Wave 7 Card 3: ONE path, whether or not a worker port is attached. The
-            // host runs the algorithm inline through the very same message loop the
-            // worker would run, so there is no second code path to drift — and a test
-            // proves the two produce byte-identical coordinates.
-            const graph = (0, layout_graph_1.serializeGraph)(this.diagram.getNodes(), this.diagram.getLinks());
-            const result = yield this.getLayoutHost().run(name, graph, (0, layout_registry_1.translateOptions)(name, Object.assign(Object.assign({}, options), { seed })), {
-                signal: options.signal,
-                onProgress: options.onProgress,
-                timeBudgetMs: options.timeBudgetMs,
-                sliceMs: options.sliceMs,
-                stopAfterIteration: options.stopAfterIteration,
-            });
-            this.commitLayoutPositions(result.nodePositions);
-            this.invalidateStaleLinkRoutes(positionsBeforeLayout);
-            return Object.assign(Object.assign({}, result), { algorithm: name, seed });
-        });
-    }
-    /**
-     * Wave 7 — Card 6: mental-map-preserving incremental layout.
-     *
-     *     await engine.layoutIncremental({ changed: [newNode.id], budget: { maxPerNode: 60 } });
-     *
-     * Mermaid re-renders the whole diagram from scratch on every edit and destroys the
-     * user's spatial memory of their own diagram. This does the opposite:
-     *
-     *   1. everything outside the affected region becomes a Card-5 ANCHOR — an
-     *      immovable obstacle the layout works AROUND (impossible before Card 5, when
-     *      "constraints" were positions clamped after an unconstrained run);
-     *   2. the result is RE-ALIGNED onto the previous layout by matching centroids —
-     *      exactly the translation that minimises squared displacement, because a
-     *      layered layout is defined only up to translation, so one new node widening
-     *      a rank slides the whole picture sideways and makes every node "move" while
-     *      the drawing is unchanged;
-     *   3. movement is MEASURED against an explicit budget and reported.
-     *
-     * Returns a tween PLAN rather than animating: the engine says where things go at
-     * time t, the host drives t — which is what keeps this runnable in a worker, in
-     * SSR and in a test.
-     *
-     * ONE SEMANTIC, STATED PLAINLY. This runs the `layered` engine, because it is the
-     * only one that honours anchors DURING coordinate assignment. If the diagram's
-     * current positions came from a DIFFERENT engine, the first incremental pass
-     * necessarily re-draws it — and that is not a bug to paper over: "move as little
-     * as possible" is ill-posed across engines, because there is no meaningful small
-     * move between two engines' idea of the same graph.
-     */
-    layoutIncremental() {
-        return tslib_1.__awaiter(this, arguments, void 0, function* (options = {}) {
-            var _a, _b, _c, _d;
-            if (!this.diagram)
-                throw new Error('No diagram loaded');
-            // The baseline EXCLUDES the just-added nodes. A node the user has only now
-            // created has no meaningful "previous position" — it sits wherever the model
-            // defaulted it (usually 0,0). Counting it is not a cosmetic error in the report:
-            // it DRAGS THE CENTROID, so the re-alignment translates the whole diagram to
-            // accommodate a position that never meant anything.
-            const changed = new Set((_a = options.changed) !== null && _a !== void 0 ? _a : []);
-            const before = new Map(this.diagram
-                .getNodes()
-                .filter((n) => !changed.has(n.id))
-                .map((n) => [n.id, { x: n.position.x, y: n.position.y }]));
-            const semantic = (0, mental_map_1.constraintsForStrategy)(this.diagram, before, options);
-            const result = yield this.layout((_b = options.name) !== null && _b !== void 0 ? _b : 'layered', Object.assign(Object.assign({}, options), { semantic }));
-            // Re-align onto the previous picture — but ONLY when the layout was FREE.
-            // Alignment cancels the arbitrary translation of a free layout; if a node is
-            // anchored the frame of reference is already pinned, and translating on top of
-            // that DRAGS THE ANCHORED NODES, which is the one thing they exist to prevent.
-            const raw = new Map(result.nodePositions);
-            const anchored = Object.keys((_c = semantic.anchors) !== null && _c !== void 0 ? _c : {}).length > 0;
-            const naive = (0, mental_map_1.measureMovement)(before, raw, options.budget);
-            const aligned = anchored ? raw : (0, mental_map_1.alignToPrevious)(raw, before).positions;
-            const settled = (0, mental_map_1.measureMovement)(before, aligned, options.budget);
-            const movement = Object.assign(Object.assign({}, settled), { savedByAlignment: Math.max(0, naive.total - settled.total) });
-            // The alignment translation below moves nodes AGAIN after layout()'s own
-            // commit — so its own snapshot/invalidate pair, or the translated picture
-            // keeps polylines routed for the pre-alignment coordinates.
-            const beforeAlign = this.snapshotNodePositions();
-            for (const [id, p] of aligned) {
-                (_d = this.diagram.getNode(id)) === null || _d === void 0 ? void 0 : _d.setPosition(p.x, p.y);
-            }
-            this.invalidateStaleLinkRoutes(beforeAlign);
-            return Object.assign(Object.assign({}, result), { nodePositions: aligned, movement, tween: (0, mental_map_1.planTween)(before, aligned) });
-        });
-    }
-    /** Every node's current position, keyed by id — the pre-layout baseline. */
-    snapshotNodePositions() {
-        var _a, _b;
-        const snapshot = new Map();
-        for (const node of (_b = (_a = this.diagram) === null || _a === void 0 ? void 0 : _a.getNodes()) !== null && _b !== void 0 ? _b : []) {
-            snapshot.set(node.id, { x: node.position.x, y: node.position.y });
-        }
-        return snapshot;
-    }
-    /**
-     * THE FIX for the stale-polyline bug: layout moves NODES, but each link keeps
-     * the polyline it was routed on before. The renderer treats a non-empty
-     * `link.points` as painted geometry and edge LABELS are placed by walking it
-     * (LabelRenderer via `link.getPointAtPosition`) — so after `engine.layout()`
-     * the labels sat at PRE-layout midpoints, observed live as "yes"/"no"
-     * stranded off-canvas at the old world coordinates while the nodes moved.
-     *
-     * Emptying the polyline is the canonical "re-route me" state: the renderer's
-     * frame pre-pass recomputes the route from the CURRENT node/port geometry on
-     * the next paint, and `setPoints` marks the link dirty so the cached VNode
-     * cannot be reused. Only links whose endpoint nodes actually MOVED are
-     * touched — an anchored subgraph's links keep their (still valid) routes.
-     *
-     * Manual waypoints are cleared with the route, same as `setPathType` /
-     * `setRouter` do: they were authored against the pre-layout coordinates, and
-     * an empty polyline with the manual flag still set would send the renderer
-     * down its keep-the-interior-waypoints branch with no interior to keep.
-     */
-    invalidateStaleLinkRoutes(before) {
-        var _a, _b;
-        if (!this.diagram)
-            return;
-        const moved = new Set();
-        for (const node of this.diagram.getNodes()) {
-            const prev = before.get(node.id);
-            if (!prev || prev.x !== node.position.x || prev.y !== node.position.y) {
-                moved.add(node.id);
-            }
-        }
-        if (moved.size === 0)
-            return;
-        const nodeIdForPort = (portId) => { var _a; return (_a = this.diagram.getNodes().find((n) => n.getPorts().some((p) => p.id === portId))) === null || _a === void 0 ? void 0 : _a.id; };
-        for (const link of this.diagram.getLinks()) {
-            const sourceId = (_a = link.sourceNodeId) !== null && _a !== void 0 ? _a : nodeIdForPort(link.sourcePortId);
-            const targetId = (_b = link.targetNodeId) !== null && _b !== void 0 ? _b : nodeIdForPort(link.targetPortId);
-            if (!(sourceId && moved.has(sourceId)) && !(targetId && moved.has(targetId))) {
-                continue;
-            }
-            if (link.points.length > 0) {
-                link.setPoints([]);
-            }
-            if (link.getMetadata('hasManualWaypoints') === true) {
-                link.setMetadata('hasManualWaypoints', false);
-            }
-        }
-    }
-    /**
-     * Commit computed positions onto the real nodes.
-     *
-     * `setPosition()` rather than a raw write, so the spatial index, the routing
-     * obstacle map and the renderer all see the move — the wave-5 lesson: a
-     * subscription to an event nobody emits is a subscription to nothing.
-     *
-     * This is also the reason a partial result is USEFUL rather than merely
-     * honest: the best-so-far positions land on the diagram exactly like final
-     * ones, so a cancelled layout leaves a real, coherent picture behind.
-     */
-    commitLayoutPositions(nodePositions) {
-        var _a, _b;
-        for (const [nodeId, position] of nodePositions) {
-            (_b = (_a = this.diagram) === null || _a === void 0 ? void 0 : _a.getNode(nodeId)) === null || _b === void 0 ? void 0 : _b.setPosition(position.x, position.y);
-        }
-    }
-    /**
-     * Run layout off the main thread.
-     *
-     * The engine does NOT construct the Worker — that would bake one bundler's URL
-     * scheme into the engine, which is exactly what the old (never-instantiated)
-     * `LayoutWorkerPool` did with its hardcoded `/assets/workers/layout.worker.js`.
-     * The caller builds the worker however its toolchain likes and hands it in:
-     *
-     *     const worker = new Worker(new URL('./layout.worker', import.meta.url),
-     *                               { type: 'module' });
-     *     engine.setLayoutPort(worker as unknown as LayoutPort);
-     *
-     * Pass `undefined` to go back to running inline.
-     */
-    setLayoutPort(port) {
-        this.layoutPort = port;
-        this.layoutHost = undefined; // rebuilt lazily against the new port
-    }
-    getLayoutHost() {
-        if (!this.layoutHost) {
-            this.layoutHost = new layout_host_1.LayoutHost(this.layoutPort, {
-                // Inline runs resolve against the LIVE registry, so a layout registered
-                // at runtime (or a built-in that a host has replaced) is honoured. A
-                // real worker cannot: functions do not survive postMessage.
-                resolve: (layoutName) => { var _a; return (_a = this.getLayoutRegistry().get(layoutName)) === null || _a === void 0 ? void 0 : _a.adapter; },
-            });
-        }
-        return this.layoutHost;
-    }
-    /**
-     * Apply layout to current diagram
-     *
-     * @param config - Layout configuration
-     * @returns Layout result with positions and metadata
-     * @throws Error if no diagram is loaded or layout service is not initialized
-     * @deprecated Wave 7 Card 0 — use {@link layout} instead. This path requires a
-     * `setLayoutService()` call that nothing ever made, so it always threw.
-     */
-    applyLayout(config) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            if (!this.diagram) {
-                throw new Error('No diagram loaded');
-            }
-            if (!this.layoutService) {
-                throw new Error('LayoutService not initialized. Call setLayoutService() first.');
-            }
-            return this.layoutService.applyLayout(this.diagram, config);
-        });
-    }
-    /**
-     * Quick helper: Apply Dagre layout
-     *
-     * @param options - Dagre layout options
-     * @param canvasDimensions - Optional canvas dimensions for viewport fitting
-     * @returns Layout result
-     */
-    applyDagreLayout(options, canvasDimensions) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            return this.applyLayout({
-                adapter: 'dagre',
-                options,
-                animate: true,
-                fit: false, // Don't auto-fit by default to allow user control
-                canvasDimensions,
-            });
-        });
-    }
-    /**
-     * Quick helper: Apply ELK layout
-     *
-     * @param options - ELK layout options
-     * @param canvasDimensions - Optional canvas dimensions for viewport fitting
-     * @returns Layout result
-     */
-    applyELKLayout(options, canvasDimensions) {
-        return tslib_1.__awaiter(this, void 0, void 0, function* () {
-            return this.applyLayout({
-                adapter: 'elk',
-                options,
-                animate: true,
-                fit: false, // Don't auto-fit by default to allow user control
-                canvasDimensions,
-            });
-        });
-    }
-    /**
-     * Cleanup and dispose of all resources
-     * Should be called when the engine is no longer needed
-     */
-    dispose() {
-        // Clear diagram
-        if (this.diagram) {
-            this.diagram.clear();
-            this.diagram = null;
-        }
-        // Clear command history
-        this.commandManager.clear();
-        // Clear performance data
-        this.performanceMonitor.clear();
-        // Clear clipboard
-        this.clipboardManager.clear();
-    }
-}
-exports.DiagramEngine = DiagramEngine;
-//# sourceMappingURL=DiagramEngine.js.map