@goodandready/dsh-opencode-provider 0.5.9 → 0.5.10

package/CHANGELOG.md

@@ -1,5 +1,10 @@
 # Changelog
 
+## 0.5.10
+
+- **Migration hint**: Settings → OpenCode explains the 0.5.7 provider-id split and why legacy `opencode`/`opencode-go` sessions stay on the built-in pi-ai routes. The analytics hint/empty state also distinguishes plugin routes from legacy traffic.
+- 90 tests.
+
 ## 0.5.9
 
 - **Analytics provider filter**: after the provider-id split, session model analytics includes only `opencode-direct`/`opencode-go-direct`. Legacy `opencode`/`opencode-go` sessions now belong to the built-in pi-ai catalog and are intentionally excluded, so the plugin no longer mixes built-in traffic into its model analytics.

package/README.md

@@ -130,12 +130,12 @@ npm pack
 Install the **packed tarball** into a profile:
 
 ```bash
-dsh plugin --profile web add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.9.tgz
+dsh plugin --profile web add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.10.tgz
 # DSH Desktop:
-dsh plugin --profile desktop add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.9.tgz
+dsh plugin --profile desktop add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.10.tgz
 
 # Or install the published package:
-dsh plugin --profile web add @goodandready/dsh-opencode-provider@0.5.9
+dsh plugin --profile web add @goodandready/dsh-opencode-provider@0.5.10
 ```
 
 Restart dsh (or DSH Desktop), then pick **OpenCode (plugin)** or **OpenCode Go (plugin)** in the model picker.

package/README.ru.md

@@ -129,12 +129,12 @@ npm pack
 Установка из **упакованного tarball**:
 
 ```bash
-dsh plugin --profile web add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.9.tgz
+dsh plugin --profile web add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.10.tgz
 # DSH Desktop:
-dsh plugin --profile desktop add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.9.tgz
+dsh plugin --profile desktop add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.10.tgz
 
 # Либо установка опубликованного пакета из npm:
-dsh plugin --profile web add @goodandready/dsh-opencode-provider@0.5.9
+dsh plugin --profile web add @goodandready/dsh-opencode-provider@0.5.10
 ```
 
 После установки перезапустите dsh (или DSH Desktop) и выберите **OpenCode (plugin)** или **OpenCode Go (plugin)** в списке моделей.

package/README.zh.md

@@ -124,12 +124,12 @@ npm pack
 通过**打包文件 (.tgz)**安装：
 
 ```bash
-dsh plugin --profile web add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.9.tgz
+dsh plugin --profile web add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.10.tgz
 # DSH 桌面端：
-dsh plugin --profile desktop add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.9.tgz
+dsh plugin --profile desktop add /absolute/path/to/goodandready-dsh-opencode-provider-0.5.10.tgz
 
 # 或从 npm 安装已发布版本：
-dsh plugin --profile web add @goodandready/dsh-opencode-provider@0.5.9
+dsh plugin --profile web add @goodandready/dsh-opencode-provider@0.5.10
 ```
 
 安装完成后重启 dsh 或 DSH 桌面端，在模型选择器中选择 **OpenCode (plugin)** 或 **OpenCode Go (plugin)** 即可。

package/lib/client.js

@@ -117,8 +117,8 @@ window.__ModuleLoader__.load({
 				heatmapModel: "Model",
 				heatmapByAccount: "Account",
 				heatmapAllAccounts: "All accounts",
-				analyticsHint: "Aggregated from local session metadata by last activity. A session that switched models is counted under its last model; failures are not exposed by the projection.",
-				analyticsEmpty: "No OpenCode sessions in this window.",
+				analyticsHint: "Aggregated from local session metadata by last activity. A session that switched models is counted under its last model; failures are not exposed by the projection. Only plugin routes are counted; legacy opencode sessions belong to the built-in catalog.",
+				analyticsEmpty: "No plugin sessions in this window. Legacy opencode sessions belong to the built-in catalog.",
 				showAll: "Show all",
 				modelSearch: "Search models…",
 				transport: "Transport",
@@ -153,6 +153,7 @@ window.__ModuleLoader__.load({
 				streamIdleTimeoutMs: "Stream idle timeout (ms)",
 				maxOutputTokens: "Output limit (empty = model default, 0 = omit)",
 				contextWindow: "Context override",
+				providerMigrationNotice: "Provider ids changed in 0.5.7: use OpenCode (plugin) / OpenCode Go (plugin). Sessions recorded with opencode/opencode-go stay on the built-in pi-ai routes; legacy traffic is excluded from plugin analytics.",
 				sidebar: "Sidebar",
 				showSidebarQuota: "Show the quota card in the sidebar",
 				showSidebarQuotaHint: "The card updates immediately after saving and otherwise every 60 seconds.",
@@ -301,8 +302,8 @@ window.__ModuleLoader__.load({
 				heatmapModel: "模型",
 				heatmapByAccount: "账户",
 				heatmapAllAccounts: "全部账户",
-				analyticsHint: "按最后活动时间聚合本地会话元数据。切换过模型的会话计入最后使用的模型；本地投影不暴露失败。",
-				analyticsEmpty: "此窗口内没有 OpenCode 会话。",
+				analyticsHint: "按最后活动时间聚合本地会话元数据。切换过模型的会话计入最后使用的模型；本地投影不暴露失败。仅统计插件路由；旧 opencode 会话属于内置目录。",
+				analyticsEmpty: "此窗口内没有插件会话。旧 opencode 会话属于内置目录。",
 				showAll: "显示全部",
 				modelSearch: "搜索模型…",
 				transport: "传输",
@@ -337,6 +338,7 @@ window.__ModuleLoader__.load({
 				streamIdleTimeoutMs: "流空闲超时（毫秒）",
 				maxOutputTokens: "输出上限（空 = 模型默认，0 = 省略）",
 				contextWindow: "上下文覆盖",
+				providerMigrationNotice: "0.5.7 起 provider id 已更改：请选择 OpenCode (plugin) / OpenCode Go (plugin)。使用 opencode/opencode-go 记录的历史会话仍使用内置 pi-ai 路由，旧流量不计入插件分析。",
 				sidebar: "侧边栏",
 				showSidebarQuota: "在侧边栏显示配额卡片",
 				showSidebarQuotaHint: "保存后立即更新；其余时间每 60 秒更新一次。",
@@ -2067,13 +2069,20 @@ window.__ModuleLoader__.load({
 				children: [
 					/* @__PURE__ */ (0, react_jsx_runtime.jsxs)("div", {
 						className: "oc-head",
-						children: [/* @__PURE__ */ (0, react_jsx_runtime.jsx)("h2", {
-							className: "oc-title",
-							children: t("title")
-						}), /* @__PURE__ */ (0, react_jsx_runtime.jsx)("p", {
-							className: "oc-hint",
-							children: t("intro")
-						})]
+						children: [
+							/* @__PURE__ */ (0, react_jsx_runtime.jsx)("h2", {
+								className: "oc-title",
+								children: t("title")
+							}),
+							/* @__PURE__ */ (0, react_jsx_runtime.jsx)("p", {
+								className: "oc-hint",
+								children: t("intro")
+							}),
+							/* @__PURE__ */ (0, react_jsx_runtime.jsx)("p", {
+								className: "oc-hint",
+								children: t("providerMigrationNotice")
+							})
+						]
 					}),
 					error === null ? null : /* @__PURE__ */ (0, react_jsx_runtime.jsx)("div", {
 						className: "oc-error",

package/lib/index.js

@@ -17,7 +17,7 @@ const DEFAULT_GO_API_BASE = "https://opencode.ai/inference/go";
 const DEFAULT_GO_ZEN_BASE = "https://opencode.ai/zen/go/v1";
 const DEFAULT_USAGE_URL = "https://opencode.ai/zen/go/v1/usage";
 const DEFAULT_AUTH_ENTRY = "opencode-go";
-const DEFAULT_USER_AGENT = "dsh-opencode-provider/0.5.9";
+const DEFAULT_USER_AGENT = "dsh-opencode-provider/0.5.10";
 const DEFAULT_CONTEXT_WINDOW = 262144;
 const DEFAULT_MAX_TOKENS = 32768;
 const DEFAULT_GENERATE_MAX_TOKENS = 32768;

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@goodandready/dsh-opencode-provider",
-  "version": "0.5.9",
+  "version": "0.5.10",
   "description": "OpenCode / OpenCode Go LLM provider plugin for DeepSeek Harness (dsh).",
   "license": "MIT",
   "type": "module",