@glasshome/sync-layer 0.3.1 → 0.4.0

package/dist/connection/auth.d.ts

@@ -53,18 +53,18 @@ export interface OAuthOptions {
  * Authenticate using OAuth flow
  *
  * This function uses `getAuth` from `home-assistant-js-websocket` which:
- * 1. Opens Home Assistant authorization page in a popup
+ * 1. Redirects the whole page to the Home Assistant authorization page
  * 2. Waits for user authorization
- * 3. Exchanges authorization code for tokens
- * 4. Returns authenticated Auth object
+ * 3. On return, HA redirects back to the app URL with `?auth_callback=1&code=…`
+ * 4. Exchanges the authorization code for tokens and returns an Auth object
  *
  * Note: For a complete OAuth flow, you typically need to:
  * - Set up a redirect URI endpoint in your app
  * - Handle the OAuth callback with the authorization code
  * - Use `getAuthCode` callback to provide the code
  *
- * Alternatively, `getAuth` can automatically handle the flow in browser environments
- * by opening a popup and listening for the callback.
+ * In browser environments `getAuth` handles this automatically via a full-page
+ * redirect (not a popup); native platforms supply `getAuthCode` instead.
  *
  * @param options - OAuth options
  * @returns Authenticated Auth object

package/dist/demo/energy-sim.d.ts

@@ -89,6 +89,12 @@ export interface DemoStatisticBucket {
     max: number;
     /** Energy in Wh accumulated over the bucket (W-h integration). */
     sum: number;
+    /**
+     * Energy added during this bucket, in kWh, matching HA's `change` field for
+     * an energy (kWh) sensor. This is the per-bucket delta (not cumulative), the
+     * value daily-total consumers read.
+     */
+    change: number;
 }
 /**
  * Synthesize statistics buckets for one energy entity across a window.

package/dist/{demo-data-DiGSP4EH.js → demo-data-CcG2efdQ.js}

@@ -160,6 +160,23 @@ function evChargerPower(lt) {
 	const ramp = into < 2 ? into / 2 : 1;
 	return 7200 * ramp;
 }
+const HEAT_PUMP_PEAK_W = 3200;
+/**
+* A smooth heat-pump load: a slow morning/evening envelope carrying a
+* few-minute shimmer. Its peaks push the home deficit past the battery's power
+* cap, so grid import (and the running cost) visibly rise and fall on live
+* ticks instead of sitting at zero. Gated out of the deep-night window so the
+* quiet 02:00-03:00 baseline is unchanged.
+*/
+function heatPumpPower(lt) {
+	const h = lt.hourFrac;
+	let envelope = 0;
+	if (h >= 6 && h <= 9) envelope = Math.sin((h - 6) / 3 * Math.PI);
+	else if (h >= 16 && h <= 23) envelope = Math.sin((h - 16) / 7 * Math.PI);
+	else return 0;
+	const shimmer = .7 + .3 * Math.sin(lt.minuteOfDay * Math.PI * 2);
+	return HEAT_PUMP_PEAK_W * envelope * shimmer;
+}
 /** Smooth occupancy envelope: extra load mornings and evenings. */
 function occupancyEnvelope(lt) {
 	const h = lt.hourFrac;
@@ -228,7 +245,7 @@ function batterySoc(lt, midnightMs) {
 	return a + (b - a) * frac;
 }
 function homePower(lt) {
-	const base = ALWAYS_ON_W + fridgePower(lt) + kettlePower(lt) + ovenPower(lt) + dishwasherPower(lt) + washerPower(lt) + evChargerPower(lt) + occupancyEnvelope(lt);
+	const base = ALWAYS_ON_W + fridgePower(lt) + kettlePower(lt) + ovenPower(lt) + dishwasherPower(lt) + washerPower(lt) + evChargerPower(lt) + heatPumpPower(lt) + occupancyEnvelope(lt);
 	return base * homeNoise(lt);
 }
 /**
@@ -416,7 +433,8 @@ function synthesizeEnergyStatistics(entityId, startMs, endMs, period) {
 			mean,
 			min: min === Number.POSITIVE_INFINITY ? mean : min,
 			max: max === Number.NEGATIVE_INFINITY ? mean : max,
-			sum: cumulativeWh
+			sum: cumulativeWh,
+			change: energyWh / 1e3
 		});
 	}
 	return buckets;
@@ -851,6 +869,26 @@ function createDemoFixtures() {
 		area_id: "entry",
 		supported_features: 1
 	});
+	add(makeEntity("light.studio_rgb", "on", {
+		brightness: 205,
+		hs_color: [265, 66],
+		color_mode: "hs",
+		supported_color_modes: ["hs", "color_temp"]
+	}), {
+		device_id: "studio_lights",
+		area_id: "living_room",
+		supported_features: 44
+	});
+	add(makeEntity("light.desk_rgb", "on", {
+		brightness: 200,
+		hs_color: [172, 79],
+		color_mode: "hs",
+		supported_color_modes: ["hs", "color_temp"]
+	}), {
+		device_id: "desk_lights",
+		area_id: "bedroom",
+		supported_features: 44
+	});
 	add(makeEntity("sensor.temperature_living", "22.5", {
 		unit_of_measurement: "°C",
 		device_class: "temperature",

package/dist/index.js

@@ -1,4 +1,4 @@
-import { ENERGY_ENTITY_IDS, createDemoFixtures, demoEnergyPreferences, energyEntityValue, formatEnergyState, isEnergyEntity, isSunUp, resetStore, setState, simulateEnergy, state, sunEvents, synthesizeEnergyHistory, synthesizeEnergyStatistics } from "./demo-data-DiGSP4EH.js";
+import { ENERGY_ENTITY_IDS, createDemoFixtures, demoEnergyPreferences, energyEntityValue, formatEnergyState, isEnergyEntity, isSunUp, resetStore, setState, simulateEnergy, state, sunEvents, synthesizeEnergyHistory, synthesizeEnergyStatistics } from "./demo-data-CcG2efdQ.js";
 import { runHaBridgeWorker } from "./worker-main-DTbzEKor.js";
 import { createConnection, createLongLivedTokenAuth, getAuth } from "home-assistant-js-websocket";
 import { produce, reconcile } from "solid-js/store";
@@ -247,18 +247,18 @@ function updateStatisticsMetadata(metadata) {
 * Authenticate using OAuth flow
 *
 * This function uses `getAuth` from `home-assistant-js-websocket` which:
-* 1. Opens Home Assistant authorization page in a popup
+* 1. Redirects the whole page to the Home Assistant authorization page
 * 2. Waits for user authorization
-* 3. Exchanges authorization code for tokens
-* 4. Returns authenticated Auth object
+* 3. On return, HA redirects back to the app URL with `?auth_callback=1&code=…`
+* 4. Exchanges the authorization code for tokens and returns an Auth object
 *
 * Note: For a complete OAuth flow, you typically need to:
 * - Set up a redirect URI endpoint in your app
 * - Handle the OAuth callback with the authorization code
 * - Use `getAuthCode` callback to provide the code
 *
-* Alternatively, `getAuth` can automatically handle the flow in browser environments
-* by opening a popup and listening for the callback.
+* In browser environments `getAuth` handles this automatically via a full-page
+* redirect (not a popup); native platforms supply `getAuthCode` instead.
 *
 * @param options - OAuth options
 * @returns Authenticated Auth object
@@ -1491,10 +1491,11 @@ function resolveIcon(entity$1, registry) {
 */
 function buildEntityView(entity$1, registry) {
 	const domain = extractDomain(entity$1.entity_id);
-	const friendlyName = entity$1.attributes.friendly_name ?? registry?.name ?? entity$1.entity_id;
+	const attributes = entity$1.attributes ?? {};
+	const friendlyName = attributes.friendly_name ?? registry?.name ?? entity$1.entity_id;
 	const name = registry?.name ?? friendlyName;
 	const iconResolution = resolveIcon(entity$1, registry);
-	const { device_class: _dc, unit_of_measurement: _uom, friendly_name: _fn, icon: _icon,...restAttributes } = entity$1.attributes;
+	const { device_class: _dc, unit_of_measurement: _uom, friendly_name: _fn, icon: _icon,...restAttributes } = attributes;
 	let areaId = registry?.area_id ?? null;
 	if (areaId === null && registry?.device_id) {
 		const device = state.devices[registry.device_id];
@@ -1508,9 +1509,9 @@ function buildEntityView(entity$1, registry) {
 		lastChanged: new Date(entity$1.last_changed),
 		lastUpdated: new Date(entity$1.last_updated),
 		context: {
-			id: entity$1.context.id,
-			parentId: entity$1.context.parent_id,
-			userId: entity$1.context.user_id
+			id: entity$1.context?.id ?? "",
+			parentId: entity$1.context?.parent_id ?? null,
+			userId: entity$1.context?.user_id ?? null
 		},
 		name,
 		friendlyName,
@@ -1525,9 +1526,9 @@ function buildEntityView(entity$1, registry) {
 		entityCategory: registry?.entity_category ?? null,
 		labels: registry?.labels ?? [],
 		aliases: registry?.aliases ?? [],
-		deviceClass: registry?.device_class ?? entity$1.attributes.device_class ?? null,
-		unitOfMeasurement: registry?.unit_of_measurement ?? entity$1.attributes.unit_of_measurement ?? null,
-		supportedFeatures: registry?.supported_features ?? entity$1.attributes.supported_features
+		deviceClass: registry?.device_class ?? attributes.device_class ?? null,
+		unitOfMeasurement: registry?.unit_of_measurement ?? attributes.unit_of_measurement ?? null,
+		supportedFeatures: registry?.supported_features ?? attributes.supported_features
 	};
 }
 /**
@@ -2190,7 +2191,8 @@ const DEMO_HLS_STREAM = "https://test-streams.mux.dev/x36xhzz/x36xhzz.m3u8";
 * Returns a public demo HLS stream when not connected.
 */
 async function fetchStream(entityId, format = "hls") {
-	if (!state.conn) return format === "hls" ? DEMO_HLS_STREAM : null;
+	if (isDemoMode()) return format === "hls" ? DEMO_HLS_STREAM : null;
+	if (!state.conn) return null;
 	const response = await sendCommand({
 		type: "camera/stream",
 		entity_id: entityId,

package/dist/testing/index.js

@@ -1,4 +1,4 @@
-import { createDemoFixtures, state } from "../demo-data-DiGSP4EH.js";
+import { createDemoFixtures, state } from "../demo-data-CcG2efdQ.js";
 
 //#region src/testing/mock-behaviors/base.ts
 /**

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@glasshome/sync-layer",
-  "version": "0.3.1",
+  "version": "0.4.0",
   "description": "Type-safe, reactive state synchronization layer for Home Assistant",
   "repository": {
     "type": "git",