@girs/gcr-4 4.0.0-3.0.4 → 4.0.4

package/gcr-4.d.cts

@@ -1,4330 +0,0 @@
-
-/*
- * Type Definitions for Gjs (https://gjs.guide/)
- *
- * These type definitions are automatically generated, do not edit them by hand.
- * If you found a bug fix it in `ts-for-gir` or create a bug report on https://github.com/gjsify/ts-for-gir
- */
-
-import './gcr-4-ambient.d.ts';
-import './gcr-4-import.d.ts';
-/**
- * Gcr-4
- */
-
-import type Gio from '@girs/gio-2.0';
-import type GObject from '@girs/gobject-2.0';
-import type GLib from '@girs/glib-2.0';
-import type Gck from '@girs/gck-2';
-
-/**
- * The status of a built certificate chain. Will be set to
- * %GCR_CERTIFICATE_CHAIN_UNKNOWN for certificate chains that have not been
- * built.
- */
-export enum CertificateChainStatus {
-    /**
-     * The certificate chain's status is unknown.
-     * When a chain is not yet built it has this status. If a chain is modified after
-     * being built, it has this status.
-     */
-    UNKNOWN,
-    /**
-     * A full chain could not be loaded. The
-     * chain does not end with a self-signed certificate, a trusted anchor, or a
-     * pinned certificate.
-     */
-    INCOMPLETE,
-    /**
-     * The certificate chain contains a revoked
-     * or otherwise explicitly distrusted certificate. The entire chain should
-     * be distrusted.
-     */
-    DISTRUSTED,
-    /**
-     * The chain ends with a self-signed
-     * certificate. No trust anchor was found.
-     */
-    SELFSIGNED,
-    /**
-     * The chain represents a pinned certificate. A
-     * pinned certificate is an exception which trusts a given certificate
-     * explicitly for a purpose and communication with a certain peer.
-     */
-    PINNED,
-    /**
-     * The chain ends with an anchored
-     * certificate. The anchored certificate is not necessarily self-signed.
-     */
-    ANCHORED,
-}
-/**
- * The format of a certificate request. Currently only PKCS#10 is supported.
- */
-export enum CertificateRequestFormat {
-    /**
-     * certificate request is in PKCS#10 format
-     */
-    CERTIFICATE_REQUEST_PKCS10,
-}
-/**
- * Values responding to error codes for parsing and serializing data.
- */
-export enum DataError {
-    /**
-     * Failed to parse or serialize the data
-     */
-    FAILURE,
-    /**
-     * The data was unrecognized or unsupported
-     */
-    UNRECOGNIZED,
-    /**
-     * The operation was cancelled
-     */
-    CANCELLED,
-    /**
-     * The data was encrypted or locked and could not be unlocked.
-     */
-    LOCKED,
-}
-/**
- * The various format identifiers.
- */
-export enum DataFormat {
-    /**
-     * Represents all the formats, when enabling or disabling
-     */
-    ALL,
-    /**
-     * Not a valid format
-     */
-    INVALID,
-    /**
-     * DER encoded private key
-     */
-    DER_PRIVATE_KEY,
-    /**
-     * DER encoded RSA private key
-     */
-    DER_PRIVATE_KEY_RSA,
-    /**
-     * DER encoded DSA private key
-     */
-    DER_PRIVATE_KEY_DSA,
-    /**
-     * DER encoded EC private key
-     */
-    DER_PRIVATE_KEY_EC,
-    /**
-     * DER encoded SubjectPublicKeyInfo
-     */
-    DER_SUBJECT_PUBLIC_KEY,
-    /**
-     * DER encoded X.509 certificate
-     */
-    DER_CERTIFICATE_X509,
-    /**
-     * DER encoded PKCS#7 container file which can contain certificates
-     */
-    DER_PKCS7,
-    /**
-     * DER encoded PKCS#8 file which can contain a key
-     */
-    DER_PKCS8,
-    /**
-     * Unencrypted DER encoded PKCS#8 file which can contain a key
-     */
-    DER_PKCS8_PLAIN,
-    /**
-     * Encrypted DER encoded PKCS#8 file which can contain a key
-     */
-    DER_PKCS8_ENCRYPTED,
-    /**
-     * DER encoded PKCS#10 certificate request file
-     */
-    DER_PKCS10,
-    /**
-     * DER encoded SPKAC as generated by HTML5 keygen element
-     */
-    DER_SPKAC,
-    /**
-     * OpenSSL style SPKAC data
-     */
-    BASE64_SPKAC,
-    /**
-     * DER encoded PKCS#12 file which can contain certificates and/or keys
-     */
-    DER_PKCS12,
-    /**
-     * OpenSSH v1 or v2 public key
-     */
-    OPENSSH_PUBLIC,
-    /**
-     * OpenPGP key packet(s)
-     */
-    OPENPGP_PACKET,
-    /**
-     * OpenPGP public or private key armor encoded data
-     */
-    OPENPGP_ARMOR,
-    /**
-     * An OpenSSL style PEM file with unspecified contents
-     */
-    PEM,
-    /**
-     * An OpenSSL style PEM file with a private RSA key
-     */
-    PEM_PRIVATE_KEY_RSA,
-    /**
-     * An OpenSSL style PEM file with a private DSA key
-     */
-    PEM_PRIVATE_KEY_DSA,
-    /**
-     * An OpenSSL style PEM file with an X.509 certificate
-     */
-    PEM_CERTIFICATE_X509,
-    /**
-     * An OpenSSL style PEM file containing PKCS#7
-     */
-    PEM_PKCS7,
-    /**
-     * Unencrypted OpenSSL style PEM file containing PKCS#8
-     */
-    PEM_PKCS8_PLAIN,
-    /**
-     * Encrypted OpenSSL style PEM file containing PKCS#8
-     */
-    PEM_PKCS8_ENCRYPTED,
-    /**
-     * An OpenSSL style PEM file containing PKCS#12
-     */
-    PEM_PKCS12,
-    /**
-     * An OpenSSL style PEM file with a private key
-     */
-    PEM_PRIVATE_KEY,
-    /**
-     * An OpenSSL style PEM file containing PKCS#10
-     */
-    PEM_PKCS10,
-    /**
-     * An OpenSSL style PEM file with a private EC key
-     */
-    PEM_PRIVATE_KEY_EC,
-    /**
-     * An OpenSSL style PEM file containing a SubjectPublicKeyInfo
-     */
-    PEM_PUBLIC_KEY,
-}
-/**
- * Various replies returned by [method`Prompt`.confirm] and friends.
- */
-export enum PromptReply {
-    /**
-     * the prompt was cancelled
-     */
-    CANCEL,
-    /**
-     * the user replied with 'ok'
-     */
-    CONTINUE,
-}
-/**
- * No error returned by the #GcrSystemPrompt is suitable for display or
- * to the user.
- * 
- * If the system prompter can only show one prompt at a time, and there is
- * already a prompt being displayed, and the timeout waiting to open the
- * prompt expires, then %GCR_SYSTEM_PROMPT_IN_PROGRESS is returned.
- */
-export enum SystemPromptError {
-    /**
-     * another prompt is already in progress
-     */
-    SYSTEM_PROMPT_IN_PROGRESS,
-}
-/**
- * The mode for the system prompter. Most system prompters can only show
- * one prompt at a time and would use the %GCR_SYSTEM_PROMPTER_SINGLE mode.
- */
-export enum SystemPrompterMode {
-    /**
-     * only one prompt shown at a time
-     */
-    SINGLE,
-    /**
-     * more than one prompt shown at a time
-     */
-    MULTIPLE,
-}
-/**
- * Flags to be used with the gcr_certificate_chain_build() operation.
- * @bitfield 
- */
-export enum CertificateChainFlags {
-    /**
-     * no flags
-     */
-    NONE,
-    /**
-     * If this flag is specified then no
-     * lookups for anchors or pinned certificates are done, and the resulting chain
-     * will be neither anchored or pinned. Additionally no missing certificate
-     * authorities are looked up in PKCS#11.
-     */
-    NO_LOOKUPS,
-}
-export enum CertificateSectionFlags {
-    NONE,
-    IMPORTANT,
-}
-/**
- * The major version number of the Gcr library.
- */
-export const MAJOR_VERSION: number
-/**
- * The micro version number of the Gcr library.
- */
-export const MICRO_VERSION: number
-/**
- * The minor version number of the Gcr library.
- */
-export const MINOR_VERSION: number
-/**
- * The purpose used to verify the client certificate in a TLS connection.
- */
-export const PURPOSE_CLIENT_AUTH: string | null
-/**
- * The purpose used to verify certificate used for the signature on signed code.
- */
-export const PURPOSE_CODE_SIGNING: string | null
-/**
- * The purpose used to verify certificates that are used in email communication
- * such as S/MIME.
- */
-export const PURPOSE_EMAIL: string | null
-/**
- * The purpose used to verify the server certificate in a TLS connection. This
- * is the most common purpose in use.
- */
-export const PURPOSE_SERVER_AUTH: string | null
-/**
- * The current secret exchange protocol. Key agreement is done using DH with the
- * 1536 bit IKE parameter group. Keys are derived using SHA256 with HKDF. The
- * transport encryption is done with 128 bit AES.
- */
-export const SECRET_EXCHANGE_PROTOCOL_1: string | null
-export const UNLOCK_OPTION_ALWAYS: string | null
-export const UNLOCK_OPTION_IDLE: string | null
-export const UNLOCK_OPTION_SESSION: string | null
-export const UNLOCK_OPTION_TIMEOUT: string | null
-export function data_error_get_domain(): GLib.Quark
-/**
- * Create a key fingerprint for a certificate, public key or private key.
- * Note that this is not a fingerprint of certificate data, which you would
- * use gcr_certificate_get_fingerprint() for.
- * @param attrs attributes for key or certificate
- * @param checksum_type the type of fingerprint to create
- * @returns the          fingerprint or %NULL if the input was invalid.
- */
-export function fingerprint_from_attributes(attrs: Gck.Attributes, checksum_type: GLib.ChecksumType): Uint8Array | null
-/**
- * Create a key fingerprint for a DER encoded subjectPublicKeyInfo. The
- * fingerprint is created so that it will be identical for a key and its
- * corresponding certificate.
- * 
- * Note that in the case of certificates this is not a fingerprint of the
- * actual certificate data, but rather of the public key contained in a
- * certificate.
- * @param key_info DER encoded subjectPublicKeyInfo structure
- * @param checksum_type the type of fingerprint to create
- * @returns the          fingerprint or %NULL if the input was invalid.
- */
-export function fingerprint_from_subject_public_key_info(key_info: Uint8Array, checksum_type: GLib.ChecksumType): Uint8Array | null
-/**
- * Create a set of importers which can import this parsed item.
- * The parsed item is represented by the state of the GcrParser at the
- * time of calling this method.
- * @param parsed a parser with a parsed item to import
- * @returns a list of importers          which can import the parsed item, which should be freed with          g_object_unref(), or %NULL if no types of importers can be created
- */
-export function importer_create_for_parsed(parsed: Parsed): Importer[]
-/**
- * Queues an additional item to be imported in all compattible importers
- * in the set. The parsed item is represented by the state of the #GcrParser
- * at the time of calling this method.
- * 
- * If the parsed item is incompatible with an importer, then that the item
- * will not be queued on that importer.
- * @param importers a set of importers
- * @param parsed a parsed item
- * @returns a new set of importers          that queued the item.
- */
-export function importer_queue_and_filter_for_parsed(importers: Importer[], parsed: Parsed): Importer[]
-/**
- * Register an importer to handle parsed items that match the given attributes.
- * @param importer_type the GType of the importer being registered
- * @param attrs the attributes that this importer is compatible with
- */
-export function importer_register(importer_type: GObject.GType, attrs: Gck.Attributes): void
-/**
- * Register built-in PKCS#11 and GnuPG importers.
- */
-export function importer_register_well_known(): void
-/**
- * Disconnect the mock prompter
- */
-export function mock_prompter_disconnect(): void
-/**
- * Queue an expected response on the mock prompter.
- * 
- * Expects any prompt, and closes the prompt when it gets it.
- */
-export function mock_prompter_expect_close(): void
-/**
- * Queue an expected response on the mock prompter.
- * 
- * Expects a confirmation prompt, and then cancels that prompt.
- */
-export function mock_prompter_expect_confirm_cancel(): void
-/**
- * Queue an expected response on the mock prompter.
- * 
- * Expects a password prompt, and then cancels that prompt.
- */
-export function mock_prompter_expect_password_cancel(): void
-/**
- * Get the delay in milliseconds before the mock prompter completes
- * an expected prompt.
- * @returns the delay
- */
-export function mock_prompter_get_delay_msec(): number
-/**
- * Check if the mock prompter is expecting a response. This will be %TRUE
- * when one of the <literal>gcr_mock_prompter_expect_xxx<!-- -->()</literal>
- * functions have been used to queue an expected prompt, but that prompt
- * response has not be 'used' yet.
- * @returns whether expecting a prompt
- */
-export function mock_prompter_is_expecting(): boolean
-/**
- * Check if the mock prompter is showing any prompts.
- * @returns whether prompting
- */
-export function mock_prompter_is_prompting(): boolean
-/**
- * Set the delay in milliseconds before the mock prompter completes
- * an expected prompt.
- * @param delay_msec prompt response delay in milliseconds
- */
-export function mock_prompter_set_delay_msec(delay_msec: number): void
-/**
- * Start the mock prompter. This is often used from the
- * <literal>setup<!-- -->()</literal> function of tests.
- * 
- * Starts the mock prompter in an additional thread. Use the returned DBus bus
- * name with gcr_system_prompt_open_for_prompter() to connect to this prompter.
- * @returns the bus name that the mock prompter is listening on
- */
-export function mock_prompter_start(): string | null
-/**
- * Stop the mock prompter. This is often used from the
- * <literal>teardown<!-- -->()</literal> function of tests.
- */
-export function mock_prompter_stop(): void
-/**
- * Unreferences a parsed item which was referenced with gcr_parsed_ref()
- * @param parsed a parsed item
- */
-export function parsed_unref(parsed: any | null): void
-/**
- * Add a #GckModule to the list of PKCS#11 modules that are used by the
- * GCR library.
- * 
- * It is not normally necessary to call this function. The available
- * PKCS#11 modules installed on the system are automatically loaded
- * by the GCR library.
- * @param module a #GckModule
- */
-export function pkcs11_add_module(module: Gck.Module): void
-/**
- * Initialize a PKCS#11 module and add it to the modules that are
- * used by the GCR library. Note that is an error to initialize the same
- * PKCS#11 module twice.
- * 
- * It is not normally necessary to call this function. The available
- * PKCS#11 modules installed on the system are automatically loaded
- * by the GCR library.
- * @param module_path the full file path of the PKCS#11 module
- * @param unused unused
- * @returns whether the module was sucessfully added.
- */
-export function pkcs11_add_module_from_file(module_path: string | null, unused: any | null): boolean
-/**
- * List all the PKCS#11 modules that are used by the GCR library.
- * Each module is a [class`Gck`.Module] object.
- * 
- * An empty list of modules will be returned if [func`pkcs1`1_set_modules],
- * or [func`pkcs1`1_initialize] has not yet run.
- * @returns a newly allocated list          of #GckModule objects
- */
-export function pkcs11_get_modules(): Gck.Module[]
-/**
- * List all the PKCS#11 slots that are used by the GCR library for lookup
- * of trust assertions. Each slot is a [class`Gck`.Slot] object.
- * 
- * This will return an empty list if the [func`pkcs1`1_initialize] function has
- * not yet been called.
- * @returns a list of #GckSlot          objects to use for lookup of trust, or the empty list if not          initialized or no appropriate trust stores could be found.
- */
-export function pkcs11_get_trust_lookup_slots(): Gck.Slot[]
-/**
- * Get the PKCS#11 URIs that are used to identify which slots to use for
- * lookup trust assertions.
- * @returns the uri which identifies trust storage slot
- */
-export function pkcs11_get_trust_lookup_uris(): string[] | null
-/**
- * Selects an appropriate PKCS#11 slot to store trust assertions. The slot
- * to use is normally configured automatically by the system.
- * 
- * This will only return a valid result after the [func`pkcs1`1_initialize]
- * method has been called.
- * 
- * When done with the #GckSlot, use g_object_unref() to release it.
- * @returns the #GckSlot to use for trust          assertions, or null if not initialized or no appropriate          trust store could be found.
- */
-export function pkcs11_get_trust_store_slot(): Gck.Slot | null
-/**
- * Get the PKCS#11 URI that is used to identify which slot to use for
- * storing trust storage.
- * @returns the uri which identifies trust storage slot
- */
-export function pkcs11_get_trust_store_uri(): string | null
-/**
- * Asynchronously initialize the registered PKCS#11 modules.
- * @param cancellable optional cancellable used to cancel the operation
- * @returns whether the operation was successful or not.
- */
-export function pkcs11_initialize(cancellable: Gio.Cancellable | null): boolean
-/**
- * Asynchronously initialize the registered PKCS#11 modules.
- * @param cancellable optional cancellable used to cancel the operation
- * @param callback callback which will be called when the operation completes
- */
-export function pkcs11_initialize_async<Z = unknown>(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Z> | null): void
-
-// Overloads of pkcs11_initialize_async
-
-/**
- * Promisified version of {@link pkcs11_initialize_async}
- * 
- * Asynchronously initialize the registered PKCS#11 modules.
- * @param cancellable optional cancellable used to cancel the operation
- * @returns A Promise of: whether the operation was successful or not.
- */
-export function pkcs11_initialize_async<Z = unknown>(cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-/**
- * Complete the asynchronous operation to initialize the registered PKCS#11
- * modules.
- * @param result the asynchronous result
- * @returns whether the operation was successful or not.
- */
-export function pkcs11_initialize_finish(result: Gio.AsyncResult): boolean
-/**
- * Set the list of PKCS#11 modules that are used by the GCR library.
- * Each module in the list is a [class`Gck`.Module] object.
- * 
- * It is not normally necessary to call this function. The available
- * PKCS#11 modules installed on the system are automatically loaded
- * by the GCR library.
- * @param modules a list of PKCS#11 modules
- */
-export function pkcs11_set_modules(modules: Gck.Module[]): void
-/**
- * Set the PKCS#11 URIs that are used to identify which slots to use for
- * lookup of trust assertions.
- * 
- * It is not normally necessary to call this function. The relevant
- * PKCS#11 slots are automatically configured by the GCR library.
- * @param pkcs11_uris the uris which identifies trust lookup slots
- */
-export function pkcs11_set_trust_lookup_uris(pkcs11_uris: string | null): void
-/**
- * Set the PKCS#11 URI that is used to identify which slot to use for
- * storing trust assertions.
- * 
- * It is not normally necessary to call this function. The relevant
- * PKCS#11 slot is automatically configured by the GCR library.
- * @param pkcs11_uri the uri which identifies trust storage slot
- */
-export function pkcs11_set_trust_store_uri(pkcs11_uri: string | null): void
-/**
- * Add a pinned `certificate` for connections to `peer` for `purpose`. A pinned
- * certificate overrides all other certificate verification and should be
- * used with care.
- * 
- * If the same pinned certificate already exists, then this operation
- * does not add another, and succeeds without error.
- * 
- * This call may block, see gcr_trust_add_pinned_certificate_async() for the
- * non-blocking version.
- * @param certificate a #GcrCertificate
- * @param purpose the purpose string
- * @param peer the peer for this pinned certificate
- * @param cancellable a #GCancellable
- * @returns %TRUE if the pinned certificate is recorded successfully
- */
-export function trust_add_pinned_certificate(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null): boolean
-/**
- * Add a pinned certificate for communication with `peer` for `purpose`. A pinned
- * certificate overrides all other certificate verification and should be used
- * with care.
- * 
- * If the same pinned certificate already exists, then this operation
- * does not add another, and succeeds without error.
- * 
- * When the operation is finished, callback will be called. You can then call
- * [func`Gcr`.trust_add_pinned_certificate_finish] to get the result of the
- * operation.
- * @param certificate a #GcrCertificate
- * @param purpose the purpose string
- * @param peer the peer for this pinned certificate
- * @param cancellable a #GCancellable
- * @param callback a #GAsyncReadyCallback to call when the operation completes
- */
-export function trust_add_pinned_certificate_async<Z = unknown>(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Z> | null): void
-
-// Overloads of trust_add_pinned_certificate_async
-
-/**
- * Promisified version of {@link trust_add_pinned_certificate_async}
- * 
- * Add a pinned certificate for communication with `peer` for `purpose`. A pinned
- * certificate overrides all other certificate verification and should be used
- * with care.
- * 
- * If the same pinned certificate already exists, then this operation
- * does not add another, and succeeds without error.
- * 
- * When the operation is finished, callback will be called. You can then call
- * [func`Gcr`.trust_add_pinned_certificate_finish] to get the result of the
- * operation.
- * @param certificate a #GcrCertificate
- * @param purpose the purpose string
- * @param peer the peer for this pinned certificate
- * @param cancellable a #GCancellable
- * @returns A Promise of: %TRUE if the pinned certificate is recorded successfully
- */
-export function trust_add_pinned_certificate_async<Z = unknown>(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-/**
- * Finishes an asynchronous operation started by
- * gcr_trust_add_pinned_certificate_async().
- * @param result the #GAsyncResult passed to the callback
- * @returns %TRUE if the pinned certificate is recorded successfully
- */
-export function trust_add_pinned_certificate_finish(result: Gio.AsyncResult): boolean
-/**
- * Check if the `certificate` is a trust anchor for the given `purpose`. A trust
- * anchor is used to verify the signatures on other certificates when verifying
- * a certificate chain. Also known as a trusted certificate authority.
- * 
- * This call may block, see [func`Gcr`.trust_is_certificate_anchored_async] for
- * the non-blocking version.
- * 
- * In the case of an error, %FALSE is also returned. Check `error` to detect
- * if an error occurred.
- * @param certificate a #GcrCertificate to check
- * @param purpose the purpose string
- * @param cancellable a #GCancellable
- * @returns %TRUE if the certificate is a trust anchor
- */
-export function trust_is_certificate_anchored(certificate: Certificate, purpose: string | null, cancellable: Gio.Cancellable | null): boolean
-/**
- * Check if the `certificate` is a trust anchor for the given `purpose`. A trust
- * anchor is used to verify the signatures on other certificates when verifying
- * a certificate chain. Also known as a trusted certificate authority.
- * 
- * When the operation is finished, callback will be called. You can then call
- * gcr_trust_is_certificate_anchored_finish() to get the result of the operation.
- * @param certificate a #GcrCertificate to check
- * @param purpose the purpose string
- * @param cancellable a #GCancellable
- * @param callback a #GAsyncReadyCallback to call when the operation completes
- */
-export function trust_is_certificate_anchored_async<Z = unknown>(certificate: Certificate, purpose: string | null, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Z> | null): void
-
-// Overloads of trust_is_certificate_anchored_async
-
-/**
- * Promisified version of {@link trust_is_certificate_anchored_async}
- * 
- * Check if the `certificate` is a trust anchor for the given `purpose`. A trust
- * anchor is used to verify the signatures on other certificates when verifying
- * a certificate chain. Also known as a trusted certificate authority.
- * 
- * When the operation is finished, callback will be called. You can then call
- * gcr_trust_is_certificate_anchored_finish() to get the result of the operation.
- * @param certificate a #GcrCertificate to check
- * @param purpose the purpose string
- * @param cancellable a #GCancellable
- * @returns A Promise of: %TRUE if the certificate is a trust anchor
- */
-export function trust_is_certificate_anchored_async<Z = unknown>(certificate: Certificate, purpose: string | null, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-/**
- * Finishes an asynchronous operation started by
- * gcr_trust_is_certificate_anchored_async().
- * 
- * In the case of an error, %FALSE is also returned. Check `error` to detect
- * if an error occurred.
- * @param result the #GAsyncResult passed to the callback
- * @returns %TRUE if the certificate is a trust anchor
- */
-export function trust_is_certificate_anchored_finish(result: Gio.AsyncResult): boolean
-/**
- * Checks whether the certificate that can be uniquely identified with the
- * given `serial_nr` and `issuer` is marked as distrusted (for example by the
- * user, or because it's part of a CRL).
- * 
- * Since we can't directly use [iface`Certificate]` to fetch these values, you
- * need to call these with the raw serial number and issuer as provided by the
- * PKCS#11 fields `CKA_SERIAL_NR` and `CKA_ISSUER`.
- * @param serial_nr The serial number of the certificate
- * @param issuer The raw issuer
- * @param cancellable a #GCancellable or %NULL
- * @returns %TRUE if the certificate is marked as distrusted
- */
-export function trust_is_certificate_distrusted(serial_nr: Uint8Array, issuer: Uint8Array, cancellable: Gio.Cancellable | null): boolean
-/**
- * Asynchronously checks whether the certificate that can be uniquely
- * identified with the given `serial_nr` and `issuer` is marked as distrusted
- * (for example by the user, or because it's part of a CRL).
- * 
- * Since we can't directly use [iface`Certificate]` to fetch these values, you
- * need to call these with the raw serial number and issuer as provided by the
- * PKCS#11 fields `CKA_SERIAL_NR` and `CKA_ISSUER`.
- * 
- * When the operation is finished, `callback` will be called. You can then call
- * [func`trust_is_certificate_distrusted_finish]` to get the result of the
- * operation.
- * @param serial_nr The serial number of the certificate
- * @param issuer The raw issuer
- * @param cancellable a #GCancellable or %NULL
- * @param callback a #GAsyncReadyCallback to call when the operation completes
- */
-export function trust_is_certificate_distrusted_async<Z = unknown>(serial_nr: Uint8Array, issuer: Uint8Array, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Z> | null): void
-
-// Overloads of trust_is_certificate_distrusted_async
-
-/**
- * Promisified version of {@link trust_is_certificate_distrusted_async}
- * 
- * Asynchronously checks whether the certificate that can be uniquely
- * identified with the given `serial_nr` and `issuer` is marked as distrusted
- * (for example by the user, or because it's part of a CRL).
- * 
- * Since we can't directly use [iface`Certificate]` to fetch these values, you
- * need to call these with the raw serial number and issuer as provided by the
- * PKCS#11 fields `CKA_SERIAL_NR` and `CKA_ISSUER`.
- * 
- * When the operation is finished, `callback` will be called. You can then call
- * [func`trust_is_certificate_distrusted_finish]` to get the result of the
- * operation.
- * @param serial_nr The serial number of the certificate
- * @param issuer The raw issuer
- * @param cancellable a #GCancellable or %NULL
- * @returns A Promise of: %TRUE if the certificate is a trust anchor
- */
-export function trust_is_certificate_distrusted_async<Z = unknown>(serial_nr: Uint8Array, issuer: Uint8Array, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-/**
- * Finishes an asynchronous operation started by
- * [func`trust_is_certificate_distrusted_async]`.
- * 
- * In the case of an error, %FALSE is also returned. Check `error` to detect
- * if an error occurred.
- * @param result the #GAsyncResult passed to the callback
- * @returns %TRUE if the certificate is a trust anchor
- */
-export function trust_is_certificate_distrusted_finish(result: Gio.AsyncResult): boolean
-/**
- * Check if `certificate` is pinned for `purpose` to communicate with `peer`.
- * A pinned certificate overrides all other certificate verification.
- * 
- * This call may block, see gcr_trust_is_certificate_pinned_async() for the
- * non-blocking version.
- * 
- * In the case of an error, %FALSE is also returned. Check `error` to detect
- * if an error occurred.
- * @param certificate a #GcrCertificate to check
- * @param purpose the purpose string
- * @param peer the peer for this pinned
- * @param cancellable a #GCancellable
- * @returns %TRUE if the certificate is pinned for the host and purpose
- */
-export function trust_is_certificate_pinned(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null): boolean
-/**
- * Check if `certificate` is pinned for `purpose` to communicate with `peer`. A
- * pinned certificate overrides all other certificate verification.
- * 
- * When the operation is finished, callback will be called. You can then call
- * [func`Gcr`.trust_is_certificate_pinned_finish] to get the result of the
- * operation.
- * @param certificate a #GcrCertificate to check
- * @param purpose the purpose string
- * @param peer the peer for this pinned
- * @param cancellable a #GCancellable
- * @param callback a #GAsyncReadyCallback to call when the operation completes
- */
-export function trust_is_certificate_pinned_async<Z = unknown>(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Z> | null): void
-
-// Overloads of trust_is_certificate_pinned_async
-
-/**
- * Promisified version of {@link trust_is_certificate_pinned_async}
- * 
- * Check if `certificate` is pinned for `purpose` to communicate with `peer`. A
- * pinned certificate overrides all other certificate verification.
- * 
- * When the operation is finished, callback will be called. You can then call
- * [func`Gcr`.trust_is_certificate_pinned_finish] to get the result of the
- * operation.
- * @param certificate a #GcrCertificate to check
- * @param purpose the purpose string
- * @param peer the peer for this pinned
- * @param cancellable a #GCancellable
- * @returns A Promise of: %TRUE if the certificate is pinned.
- */
-export function trust_is_certificate_pinned_async<Z = unknown>(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-/**
- * Finishes an asynchronous operation started by
- * gcr_trust_is_certificate_pinned_async().
- * 
- * In the case of an error, %FALSE is also returned. Check `error` to detect
- * if an error occurred.
- * @param result the #GAsyncResult passed to the callback
- * @returns %TRUE if the certificate is pinned.
- */
-export function trust_is_certificate_pinned_finish(result: Gio.AsyncResult): boolean
-/**
- * Remove a pinned certificate for communication with `peer` for `purpose`.
- * 
- * If the same pinned certificate does not exist, or was already removed,
- * then this operation succeeds without error.
- * 
- * This call may block, see gcr_trust_remove_pinned_certificate_async() for the
- * non-blocking version.
- * @param certificate a #GcrCertificate
- * @param purpose the purpose string
- * @param peer the peer for this pinned certificate
- * @param cancellable a #GCancellable
- * @returns %TRUE if the pinned certificate no longer exists
- */
-export function trust_remove_pinned_certificate(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null): boolean
-/**
- * Remove a pinned certificate for communication with `peer` for `purpose`.
- * 
- * If the same pinned certificate does not exist, or was already removed,
- * then this operation succeeds without error.
- * 
- * When the operation is finished, callback will be called. You can then call
- * gcr_trust_remove_pinned_certificate_finish() to get the result of the
- * operation.
- * @param certificate a #GcrCertificate
- * @param purpose the purpose string
- * @param peer the peer for this pinned certificate
- * @param cancellable a #GCancellable
- * @param callback a #GAsyncReadyCallback to call when the operation completes
- */
-export function trust_remove_pinned_certificate_async<Z = unknown>(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Z> | null): void
-
-// Overloads of trust_remove_pinned_certificate_async
-
-/**
- * Promisified version of {@link trust_remove_pinned_certificate_async}
- * 
- * Remove a pinned certificate for communication with `peer` for `purpose`.
- * 
- * If the same pinned certificate does not exist, or was already removed,
- * then this operation succeeds without error.
- * 
- * When the operation is finished, callback will be called. You can then call
- * gcr_trust_remove_pinned_certificate_finish() to get the result of the
- * operation.
- * @param certificate a #GcrCertificate
- * @param purpose the purpose string
- * @param peer the peer for this pinned certificate
- * @param cancellable a #GCancellable
- * @returns A Promise of: %TRUE if the pinned certificate no longer exists
- */
-export function trust_remove_pinned_certificate_async<Z = unknown>(certificate: Certificate, purpose: string | null, peer: string | null, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-/**
- * Finishes an asynchronous operation started by
- * gcr_trust_remove_pinned_certificate_async().
- * @param result the #GAsyncResult passed to the callback
- * @returns %TRUE if the pinned certificate no longer exists
- */
-export function trust_remove_pinned_certificate_finish(result: Gio.AsyncResult): boolean
-export module Certificate {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-    }
-
-}
-
-export interface Certificate {
-
-    // Own properties of Gcr-4.Gcr.Certificate
-
-    /**
-     * A readable description for this certificate
-     */
-    readonly description: string | null
-    /**
-     * The expiry date of the certificate
-     */
-    readonly expiry_date: GLib.DateTime
-    /**
-     * Common name part of the certificate issuer
-     */
-    readonly issuer_name: string | null
-    /**
-     * A readable label for this certificate.
-     */
-    readonly label: string | null
-    readonly subject_name: string | null
-
-    // Owm methods of Gcr-4.Gcr.Certificate
-
-    /**
-     * Get the basic constraints for the certificate if present. If %FALSE is
-     * returned then no basic constraints are present and the `is_ca` and
-     * `path_len` arguments are not changed.
-     * @returns whether basic constraints are present or not
-     */
-    get_basic_constraints(): [ /* returnType */ boolean, /* is_ca */ boolean, /* path_len */ number ]
-    /**
-     * Gets the raw DER data for an X.509 certificate.
-     * @returns raw DER data of the X.509 certificate
-     */
-    get_der_data(): Uint8Array
-    /**
-     * Get the expiry date of this certificate.
-     * @returns An expiry date of this certificate.
-     */
-    get_expiry_date(): GLib.DateTime | null
-    /**
-     * Calculate the fingerprint for this certificate.
-     * 
-     * The caller should free the returned data using g_free() when
-     * it is no longer required.
-     * @param type the type of algorithm for the fingerprint.
-     * @returns the raw binary fingerprint
-     */
-    get_fingerprint(type: GLib.ChecksumType): Uint8Array | null
-    /**
-     * Calculate the fingerprint for this certificate, and return it
-     * as a hex string.
-     * 
-     * The caller should free the returned data using g_free() when
-     * it is no longer required.
-     * @param type the type of algorithm for the fingerprint.
-     * @returns an allocated hex string which contains the fingerprint.
-     */
-    get_fingerprint_hex(type: GLib.ChecksumType): string | null
-    /**
-     * Get the list of sections from the certificate that can be shown to the user
-     * interface.
-     * @returns A #GList of #GcrCertificateSection
-     */
-    get_interface_elements(): CertificateSection[]
-    /**
-     * Get the issued date of this certificate.
-     * @returns A issued date of this certificate.
-     */
-    get_issued_date(): GLib.DateTime | null
-    /**
-     * Get the common name of the issuer of this certificate.
-     * 
-     * The string returned should be freed by the caller when no longer
-     * required.
-     * @returns The allocated issuer CN, or %NULL if no issuer CN present.
-     */
-    get_issuer_cn(): string | null
-    /**
-     * Get the full issuer DN of the certificate as a (mostly)
-     * readable string.
-     * 
-     * The string returned should be freed by the caller when no longer
-     * required.
-     * @returns The allocated issuer DN of the certificate.
-     */
-    get_issuer_dn(): string | null
-    /**
-     * Get a name to represent the issuer of this certificate.
-     * 
-     * This will try to lookup the common name, orianizational unit,
-     * organization in that order.
-     * @returns the allocated issuer name, or %NULL if no issuer name
-     */
-    get_issuer_name(): string | null
-    /**
-     * Get a part of the DN of the issuer of this certificate.
-     * 
-     * Examples of a `part` might be the 'OU' (organizational unit)
-     * or the 'CN' (common name). Only the value of that part
-     * of the DN is returned.
-     * 
-     * The string returned should be freed by the caller when no longer
-     * required.
-     * @param part a DN type string or OID.
-     * @returns the allocated part of the issuer DN, or %NULL if no          such part is present
-     */
-    get_issuer_part(part: string | null): string | null
-    /**
-     * Get the raw DER data for the issuer DN of the certificate.
-     * 
-     * The data should be freed by using g_free() when no longer required.
-     * @returns allocated memory          containing the raw issuer
-     */
-    get_issuer_raw(): Uint8Array | null
-    /**
-     * Get the key size in bits of the public key represented
-     * by this certificate.
-     * @returns The key size of the certificate.
-     */
-    get_key_size(): number
-    /**
-     * Get the raw binary serial number of the certificate.
-     * 
-     * The caller should free the returned data using g_free() when
-     * it is no longer required.
-     * @returns the raw binary serial number.
-     */
-    get_serial_number(): Uint8Array | null
-    /**
-     * Get the serial number of the certificate as a hex string.
-     * 
-     * The caller should free the returned data using g_free() when
-     * it is no longer required.
-     * @returns an allocated string containing the serial number as hex.
-     */
-    get_serial_number_hex(): string | null
-    /**
-     * Get the common name of the subject of this certificate.
-     * 
-     * The string returned should be freed by the caller when no longer
-     * required.
-     * @returns The allocated subject CN, or %NULL if no subject CN present.
-     */
-    get_subject_cn(): string | null
-    /**
-     * Get the full subject DN of the certificate as a (mostly)
-     * readable string.
-     * 
-     * The string returned should be freed by the caller when no longer
-     * required.
-     * @returns The allocated subject DN of the certificate.
-     */
-    get_subject_dn(): string | null
-    /**
-     * Get a name to represent the subject of this certificate.
-     * 
-     * This will try to lookup the common name, orianizational unit,
-     * organization in that order.
-     * @returns the allocated subject name, or %NULL if no subject name
-     */
-    get_subject_name(): string | null
-    /**
-     * Get a part of the DN of the subject of this certificate.
-     * 
-     * Examples of a `part` might be the 'OU' (organizational unit)
-     * or the 'CN' (common name). Only the value of that part
-     * of the DN is returned.
-     * 
-     * The string returned should be freed by the caller when no longer
-     * required.
-     * @param part a DN type string or OID.
-     * @returns the allocated part of the subject DN, or %NULL if no          such part is present.
-     */
-    get_subject_part(part: string | null): string | null
-    /**
-     * Get the raw DER data for the subject DN of the certificate.
-     * 
-     * The data should be freed by using g_free() when no longer required.
-     * @returns allocated memory          containing the raw subject
-     */
-    get_subject_raw(): Uint8Array | null
-    /**
-     * Check if `issuer` could be the issuer of this certificate. This is done by
-     * comparing the relevant subject and issuer fields. No signature check is
-     * done. Proper verification of certificates must be done via a crypto
-     * library.
-     * @param issuer a possible issuer #GcrCertificate
-     * @returns whether @issuer could be the issuer of the certificate.
-     */
-    is_issuer(issuer: Certificate): boolean
-    /**
-     * Implementers of the #GcrCertificate mixin should call this function to notify
-     * when the certificate has changed to emit notifications on the various
-     * properties.
-     */
-    mixin_emit_notify(): void
-
-    // Own virtual methods of Gcr-4.Gcr.Certificate
-
-    /**
-     * Gets the raw DER data for an X.509 certificate.
-     * @virtual 
-     * @returns raw DER data of the X.509 certificate
-     */
-    vfunc_get_der_data(): Uint8Array
-
-    // Class property signals of Gcr-4.Gcr.Certificate
-
-    connect(sigName: "notify::description", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::description", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::description", ...args: any[]): void
-    connect(sigName: "notify::expiry-date", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::expiry-date", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::expiry-date", ...args: any[]): void
-    connect(sigName: "notify::issuer-name", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::issuer-name", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::issuer-name", ...args: any[]): void
-    connect(sigName: "notify::label", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::label", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::label", ...args: any[]): void
-    connect(sigName: "notify::subject-name", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::subject-name", callback: (($obj: Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::subject-name", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * An interface that represents an X.509 certificate.
- * 
- * Objects can implement this interface to make a certificate usable with the
- * GCR library.
- * 
- * Various methods are available to parse out relevant bits of the certificate.
- * However no verification of the validity of a certificate is done here. Use
- * your favorite crypto library to do this.
- * 
- * You can use [class`SimpleCertificate]` to simply load a certificate for which
- * you already have the raw certificate data.
- * 
- * The #GcrCertificate interface has several properties that must be implemented.
- * You can use a mixin to implement these properties if desired. See the
- * gcr_certificate_mixin_class_init() and gcr_certificate_mixin_get_property()
- * functions.
- * @interface 
- */
-export class Certificate extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.Certificate
-
-    static name: string
-    static $gtype: GObject.GType<Certificate>
-
-    // Constructors of Gcr-4.Gcr.Certificate
-
-    constructor(config?: Certificate.ConstructorProperties) 
-    _init(config?: Certificate.ConstructorProperties): void
-}
-
-export module ImportInteraction {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends Gio.TlsInteraction.ConstructorProperties, GObject.Object.ConstructorProperties {
-    }
-
-}
-
-export interface ImportInteraction extends Gio.TlsInteraction {
-
-    // Owm methods of Gcr-4.Gcr.ImportInteraction
-
-    /**
-     * Supplement attributes before import. This means prompting the user for
-     * things like labels and the like. The needed attributes will have been passed
-     * to gcr_import_interaction_supplement_prep().
-     * 
-     * This method prompts the user and fills in the attributes. If the user or
-     * cancellable cancels the operation the error should be set with %G_IO_ERROR_CANCELLED.
-     * @param builder supplemented attributes
-     * @param cancellable optional cancellable object
-     * @returns %G_TLS_INTERACTION_HANDLED if successful or %G_TLS_INTERACTION_FAILED
-     */
-    supplement(builder: Gck.Builder, cancellable: Gio.Cancellable | null): Gio.TlsInteractionResult
-    /**
-     * Asynchronously supplement attributes before import. This means prompting the
-     * user for things like labels and the like. The needed attributes will have
-     * been passed to gcr_import_interaction_supplement_prep().
-     * 
-     * This method prompts the user and fills in the attributes.
-     * @param builder supplemented attributes
-     * @param cancellable optional cancellable object
-     * @param callback called when the operation completes
-     */
-    supplement_async(builder: Gck.Builder, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of supplement_async
-
-    /**
-     * Promisified version of {@link supplement_async}
-     * 
-     * Asynchronously supplement attributes before import. This means prompting the
-     * user for things like labels and the like. The needed attributes will have
-     * been passed to gcr_import_interaction_supplement_prep().
-     * 
-     * This method prompts the user and fills in the attributes.
-     * @param builder supplemented attributes
-     * @param cancellable optional cancellable object
-     * @returns A Promise of: %G_TLS_INTERACTION_HANDLED if successful or %G_TLS_INTERACTION_FAILED
-     */
-    supplement_async(builder: Gck.Builder, cancellable: Gio.Cancellable | null): globalThis.Promise<Gio.TlsInteractionResult>
-    /**
-     * Complete operation to asynchronously supplement attributes before import.
-     * 
-     * If the user or cancellable cancels the operation the error should be set
-     * with %G_IO_ERROR_CANCELLED.
-     * @param result the asynchronous result
-     * @returns %G_TLS_INTERACTION_HANDLED if successful or %G_TLS_INTERACTION_FAILED
-     */
-    supplement_finish(result: Gio.AsyncResult): Gio.TlsInteractionResult
-    /**
-     * Prepare for supplementing the given attributes before import. This means
-     * prompting the user for things like labels and the like. The attributes
-     * will contain attributes for values that the importer needs, either empty
-     * or prefilled with suggested values.
-     * 
-     * This method does not prompt the user, but rather just prepares the
-     * interaction that these are the attributes that are needed.
-     * @param builder attributes to supplement
-     */
-    supplement_prep(builder: Gck.Builder): void
-
-    // Own virtual methods of Gcr-4.Gcr.ImportInteraction
-
-    /**
-     * Supplement attributes before import. This means prompting the user for
-     * things like labels and the like. The needed attributes will have been passed
-     * to gcr_import_interaction_supplement_prep().
-     * 
-     * This method prompts the user and fills in the attributes. If the user or
-     * cancellable cancels the operation the error should be set with %G_IO_ERROR_CANCELLED.
-     * @virtual 
-     * @param builder supplemented attributes
-     * @param cancellable optional cancellable object
-     * @returns %G_TLS_INTERACTION_HANDLED if successful or %G_TLS_INTERACTION_FAILED
-     */
-    vfunc_supplement(builder: Gck.Builder, cancellable: Gio.Cancellable | null): Gio.TlsInteractionResult
-    /**
-     * Asynchronously supplement attributes before import. This means prompting the
-     * user for things like labels and the like. The needed attributes will have
-     * been passed to gcr_import_interaction_supplement_prep().
-     * 
-     * This method prompts the user and fills in the attributes.
-     * @virtual 
-     * @param builder supplemented attributes
-     * @param cancellable optional cancellable object
-     * @param callback called when the operation completes
-     */
-    vfunc_supplement_async(builder: Gck.Builder, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-    /**
-     * Complete operation to asynchronously supplement attributes before import.
-     * 
-     * If the user or cancellable cancels the operation the error should be set
-     * with %G_IO_ERROR_CANCELLED.
-     * @virtual 
-     * @param result the asynchronous result
-     * @returns %G_TLS_INTERACTION_HANDLED if successful or %G_TLS_INTERACTION_FAILED
-     */
-    vfunc_supplement_finish(result: Gio.AsyncResult): Gio.TlsInteractionResult
-    /**
-     * Prepare for supplementing the given attributes before import. This means
-     * prompting the user for things like labels and the like. The attributes
-     * will contain attributes for values that the importer needs, either empty
-     * or prefilled with suggested values.
-     * 
-     * This method does not prompt the user, but rather just prepares the
-     * interaction that these are the attributes that are needed.
-     * @virtual 
-     * @param builder attributes to supplement
-     */
-    vfunc_supplement_prep(builder: Gck.Builder): void
-
-    // Class property signals of Gcr-4.Gcr.ImportInteraction
-
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * This is an interface implemented by a caller performing an import. It allows
- * the importer to ask the caller for further information about the import.
- * 
- * It must be implemented on a derived class of [class`Gio`.TlsInteraction]
- * @interface 
- */
-export class ImportInteraction extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.ImportInteraction
-
-    static name: string
-    static $gtype: GObject.GType<ImportInteraction>
-
-    // Constructors of Gcr-4.Gcr.ImportInteraction
-
-    constructor(config?: ImportInteraction.ConstructorProperties) 
-    _init(config?: ImportInteraction.ConstructorProperties): void
-}
-
-export module Importer {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.Importer
-
-        /**
-         * The interaction for the importer.
-         */
-        interaction?: Gio.TlsInteraction | null
-    }
-
-}
-
-export interface Importer {
-
-    // Own properties of Gcr-4.Gcr.Importer
-
-    /**
-     * The interaction for the importer.
-     */
-    interaction: Gio.TlsInteraction
-    /**
-     * The label for the importer.
-     */
-    readonly label: string | null
-    /**
-     * The URI of the location imported to.
-     */
-    readonly uri: string | null
-
-    // Owm methods of Gcr-4.Gcr.Importer
-
-    /**
-     * Get the interaction used to prompt the user when needed by this
-     * importer.
-     * @returns the interaction or %NULL
-     */
-    get_interaction(): Gio.TlsInteraction | null
-    /**
-     * Import the queued items in the importer. This function returns immediately
-     * and completes asynchronously.
-     * @param cancellable a #GCancellable, or %NULL
-     * @param callback called when the operation completes
-     */
-    import_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of import_async
-
-    /**
-     * Promisified version of {@link import_async}
-     * 
-     * Import the queued items in the importer. This function returns immediately
-     * and completes asynchronously.
-     * @param cancellable a #GCancellable, or %NULL
-     * @returns A Promise of: whether the import succeeded or failed
-     */
-    import_async(cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-    /**
-     * Complete an asynchronous operation to import queued items.
-     * @param result an asynchronous result
-     * @returns whether the import succeeded or failed
-     */
-    import_finish(result: Gio.AsyncResult): boolean
-    /**
-     * Queues an additional item to be imported. The parsed item is represented
-     * by the state of the [class`Parser]` at the time of calling this method.
-     * 
-     * If the parsed item is incompatible with the importer, then this will
-     * fail and the item will not be queued.
-     * @param parsed a parsed item to import
-     * @returns whether the item was queued or not
-     */
-    queue_for_parsed(parsed: Parsed): boolean
-    /**
-     * Set the interaction used to prompt the user when needed by this
-     * importer.
-     * @param interaction the interaction used by the importer
-     */
-    set_interaction(interaction: Gio.TlsInteraction): void
-
-    // Own virtual methods of Gcr-4.Gcr.Importer
-
-    /**
-     * Import the queued items in the importer. This function returns immediately
-     * and completes asynchronously.
-     * @virtual 
-     * @param cancellable a #GCancellable, or %NULL
-     * @param callback called when the operation completes
-     */
-    vfunc_import_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-    /**
-     * Complete an asynchronous operation to import queued items.
-     * @virtual 
-     * @param result an asynchronous result
-     * @returns whether the import succeeded or failed
-     */
-    vfunc_import_finish(result: Gio.AsyncResult): boolean
-    /**
-     * Queues an additional item to be imported. The parsed item is represented
-     * by the state of the [class`Parser]` at the time of calling this method.
-     * 
-     * If the parsed item is incompatible with the importer, then this will
-     * fail and the item will not be queued.
-     * @virtual 
-     * @param parsed a parsed item to import
-     * @returns whether the item was queued or not
-     */
-    vfunc_queue_for_parsed(parsed: Parsed): boolean
-
-    // Class property signals of Gcr-4.Gcr.Importer
-
-    connect(sigName: "notify::interaction", callback: (($obj: Importer, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::interaction", callback: (($obj: Importer, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::interaction", ...args: any[]): void
-    connect(sigName: "notify::label", callback: (($obj: Importer, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::label", callback: (($obj: Importer, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::label", ...args: any[]): void
-    connect(sigName: "notify::uri", callback: (($obj: Importer, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::uri", callback: (($obj: Importer, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::uri", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * An interface which allows importing of certificates and keys. Each importer
- * is registered with a set of PKCS#11 attributes to match stuff that it can
- * import.
- * 
- * An importer gets passed a [class`Parser]` and accesses the currently parsed
- * item. To create a set of importers that can import the currently parsed
- * item in a parser, use [func`Importer`.create_for_parsed]. The list of
- * importers returned has the parsed item queued for import.
- * 
- * To queue additional items with a importer use
- * [method`Importer`.queue_for_parsed].  In addition you can try and queue an
- * additional item with a set of importers using the
- * [func`Importer`.queue_and_filter_for_parsed].
- * 
- * To start the import, use [method`Importer`.import_async].
- * @interface 
- */
-export class Importer extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.Importer
-
-    static name: string
-    static $gtype: GObject.GType<Importer>
-
-    // Constructors of Gcr-4.Gcr.Importer
-
-    constructor(config?: Importer.ConstructorProperties) 
-    _init(config?: Importer.ConstructorProperties): void
-    /**
-     * Create a set of importers which can import this parsed item.
-     * The parsed item is represented by the state of the GcrParser at the
-     * time of calling this method.
-     * @param parsed a parser with a parsed item to import
-     * @returns a list of importers          which can import the parsed item, which should be freed with          g_object_unref(), or %NULL if no types of importers can be created
-     */
-    static create_for_parsed(parsed: Parsed): Importer[]
-    /**
-     * Queues an additional item to be imported in all compattible importers
-     * in the set. The parsed item is represented by the state of the #GcrParser
-     * at the time of calling this method.
-     * 
-     * If the parsed item is incompatible with an importer, then that the item
-     * will not be queued on that importer.
-     * @param importers a set of importers
-     * @param parsed a parsed item
-     * @returns a new set of importers          that queued the item.
-     */
-    static queue_and_filter_for_parsed(importers: Importer[], parsed: Parsed): Importer[]
-    /**
-     * Register an importer to handle parsed items that match the given attributes.
-     * @param importer_type the GType of the importer being registered
-     * @param attrs the attributes that this importer is compatible with
-     */
-    static register(importer_type: GObject.GType, attrs: Gck.Attributes): void
-    /**
-     * Register built-in PKCS#11 and GnuPG importers.
-     */
-    static register_well_known(): void
-}
-
-export module Prompt {
-
-    // Signal callback interfaces
-
-    /**
-     * Signal callback interface for `prompt-close`
-     */
-    export interface PromptCloseSignalCallback {
-        ($obj: Prompt): void
-    }
-
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.Prompt
-
-        /**
-         * The string handle of the caller's window.
-         * 
-         * The caller window indicates to the prompt which window is prompting the
-         * user. The prompt may choose to ignore this information or use it in whatever
-         * way it sees fit.
-         * 
-         * In X11, this will be a stringified version of the XWindow handle; in
-         * Wayland this is the result of an export using the XDG foreign
-         * protocol.
-         */
-        caller_window?: string | null
-        /**
-         * The label for the cancel button in the prompt.
-         */
-        cancel_label?: string | null
-        /**
-         * Whether the additional choice is chosen or not.
-         * 
-         * The additional choice would have been setup using #GcrPrompt:choice-label.
-         */
-        choice_chosen?: boolean | null
-        /**
-         * The label for the additional choice.
-         * 
-         * If this is a non-%NULL value then an additional boolean choice will be
-         * displayed by the prompt allowing the user to select or deselect it.
-         * 
-         * If %NULL, then no additional choice is displayed.
-         * 
-         * The initial value of the choice can be set with #GcrPrompt:choice-chosen.
-         */
-        choice_label?: string | null
-        /**
-         * The label for the continue button in the prompt.
-         */
-        continue_label?: string | null
-        /**
-         * The detailed description of the prompt.
-         * 
-         * A prompt implementation may choose not to display this detailed description.
-         * The prompt message should contain relevant information.
-         */
-        description?: string | null
-        /**
-         * The prompt message for the user.
-         * 
-         * A prompt implementation should always display this message.
-         */
-        message?: string | null
-        /**
-         * Whether the prompt will prompt for a new password.
-         * 
-         * This will cause the prompt implementation to ask the user to confirm the
-         * password and/or display other relevant user interface for creating a new
-         * password.
-         */
-        password_new?: boolean | null
-        /**
-         * The title of the prompt.
-         * 
-         * A prompt implementation may choose not to display the prompt title. The
-         * #GcrPrompt:message should contain relevant information.
-         */
-        title?: string | null
-        /**
-         * A prompt warning displayed on the prompt, or %NULL for no warning.
-         * 
-         * This is a warning like "The password is incorrect." usually displayed to the
-         * user about a previous 'unsuccessful' prompt.
-         */
-        warning?: string | null
-    }
-
-}
-
-export interface Prompt {
-
-    // Own properties of Gcr-4.Gcr.Prompt
-
-    /**
-     * The string handle of the caller's window.
-     * 
-     * The caller window indicates to the prompt which window is prompting the
-     * user. The prompt may choose to ignore this information or use it in whatever
-     * way it sees fit.
-     * 
-     * In X11, this will be a stringified version of the XWindow handle; in
-     * Wayland this is the result of an export using the XDG foreign
-     * protocol.
-     */
-    caller_window: string | null
-    /**
-     * The label for the cancel button in the prompt.
-     */
-    cancel_label: string | null
-    /**
-     * Whether the additional choice is chosen or not.
-     * 
-     * The additional choice would have been setup using #GcrPrompt:choice-label.
-     */
-    choice_chosen: boolean
-    /**
-     * The label for the additional choice.
-     * 
-     * If this is a non-%NULL value then an additional boolean choice will be
-     * displayed by the prompt allowing the user to select or deselect it.
-     * 
-     * If %NULL, then no additional choice is displayed.
-     * 
-     * The initial value of the choice can be set with #GcrPrompt:choice-chosen.
-     */
-    choice_label: string | null
-    /**
-     * The label for the continue button in the prompt.
-     */
-    continue_label: string | null
-    /**
-     * The detailed description of the prompt.
-     * 
-     * A prompt implementation may choose not to display this detailed description.
-     * The prompt message should contain relevant information.
-     */
-    description: string | null
-    /**
-     * The prompt message for the user.
-     * 
-     * A prompt implementation should always display this message.
-     */
-    message: string | null
-    /**
-     * Whether the prompt will prompt for a new password.
-     * 
-     * This will cause the prompt implementation to ask the user to confirm the
-     * password and/or display other relevant user interface for creating a new
-     * password.
-     */
-    password_new: boolean
-    /**
-     * Indication of the password strength.
-     * 
-     * Prompts will return a zero value if the password is empty, and a value
-     * greater than zero if the password has any characters.
-     * 
-     * This is only valid after a successful prompt for a password.
-     */
-    readonly password_strength: number
-    /**
-     * The title of the prompt.
-     * 
-     * A prompt implementation may choose not to display the prompt title. The
-     * #GcrPrompt:message should contain relevant information.
-     */
-    title: string | null
-    /**
-     * A prompt warning displayed on the prompt, or %NULL for no warning.
-     * 
-     * This is a warning like "The password is incorrect." usually displayed to the
-     * user about a previous 'unsuccessful' prompt.
-     */
-    warning: string | null
-
-    // Owm methods of Gcr-4.Gcr.Prompt
-
-    /**
-     * Closes the prompt so that in can no longer be used to prompt. The various
-     * prompt methods will return results as if the user dismissed the prompt.
-     * 
-     * The prompt may also be closed by the implementor of the prompt object.
-     * 
-     * This emits the [signal`Prompt:`:prompt-close] signal on the prompt object.
-     */
-    close(): void
-    /**
-     * Prompts for confirmation asking a cancel/continue style question.
-     * Set the various properties on the prompt before calling this function to
-     * represent the question correctly.
-     * 
-     * This method will block until the a response is returned from the prompter.
-     * 
-     * %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The
-     * return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if
-     * an error occurs. Check the `error` argument to tell the difference.
-     * @param cancellable optional cancellation object
-     * @returns the reply from the prompt
-     */
-    confirm(cancellable: Gio.Cancellable | null): PromptReply
-    /**
-     * Prompts for confirmation asking a cancel/continue style question.
-     * Set the various properties on the prompt before calling this method to
-     * represent the question correctly.
-     * 
-     * This method will return immediately and complete asynchronously.
-     * @param cancellable optional cancellation object
-     * @param callback called when the operation completes
-     */
-    confirm_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of confirm_async
-
-    /**
-     * Promisified version of {@link confirm_async}
-     * 
-     * Prompts for confirmation asking a cancel/continue style question.
-     * Set the various properties on the prompt before calling this method to
-     * represent the question correctly.
-     * 
-     * This method will return immediately and complete asynchronously.
-     * @param cancellable optional cancellation object
-     * @returns A Promise of: the reply from the prompt
-     */
-    confirm_async(cancellable: Gio.Cancellable | null): globalThis.Promise<PromptReply>
-    /**
-     * Complete an operation to prompt for confirmation.
-     * 
-     * %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The
-     * return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if
-     * an error occurs. Check the `error` argument to tell the difference.
-     * @param result asynchronous result passed to callback
-     * @returns the reply from the prompt
-     */
-    confirm_finish(result: Gio.AsyncResult): PromptReply
-    /**
-     * Prompts for confirmation asking a cancel/continue style question.
-     * Set the various properties on the prompt before calling this function to
-     * represent the question correctly.
-     * 
-     * This method will block until the a response is returned from the prompter
-     * and will run a main loop similar to a `gtk_dialog_run()`. The application
-     * will remain responsive but care must be taken to handle reentrancy issues.
-     * 
-     * %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The
-     * return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if
-     * an error occurs. Check the `error` argument to tell the difference.
-     * @param cancellable optional cancellation object
-     * @returns the reply from the prompt
-     */
-    confirm_run(cancellable: Gio.Cancellable | null): PromptReply
-    /**
-     * Get the string handle of the caller's window.
-     * 
-     * The caller window indicates to the prompt which window is prompting the
-     * user. The prompt may choose to ignore this information or use it in whatever
-     * way it sees fit.
-     * @returns a newly allocated string containing the string          handle of the window.
-     */
-    get_caller_window(): string | null
-    /**
-     * Get the label for the cancel button.
-     * 
-     * This is the button that results in a %GCR_PROMPT_REPLY_CANCEL reply
-     * from the prompt.
-     * @returns a newly allocated string containing the label
-     */
-    get_cancel_label(): string | null
-    /**
-     * Get whether the additional choice was chosen or not.
-     * 
-     * The additional choice would have been setup using
-     * gcr_prompt_set_choice_label().
-     * @returns whether chosen
-     */
-    get_choice_chosen(): boolean
-    /**
-     * Get the label for the additional choice.
-     * 
-     * This will be %NULL if no additional choice is being displayed.
-     * @returns a newly allocated string containing the additional          choice or %NULL
-     */
-    get_choice_label(): string | null
-    /**
-     * Get the label for the continue button.
-     * 
-     * This is the button that results in a %GCR_PROMPT_REPLY_CONTINUE reply
-     * from the prompt.
-     * @returns a newly allocated string containing the label
-     */
-    get_continue_label(): string | null
-    /**
-     * Get the detailed description of the prompt.
-     * 
-     * A prompt implementation may choose not to display this detailed description.
-     * The prompt message should contain relevant information.
-     * @returns a newly allocated string containing the detailed          description of the prompt
-     */
-    get_description(): string | null
-    /**
-     * Gets the prompt message for the user.
-     * 
-     * A prompt implementation should always display this message.
-     * @returns a newly allocated string containing the detailed          description of the prompt
-     */
-    get_message(): string | null
-    /**
-     * Get whether the prompt will prompt for a new password.
-     * 
-     * This will cause the prompt implementation to ask the user to confirm the
-     * password and/or display other relevant user interface for creating a new
-     * password.
-     * @returns whether in new password mode or not
-     */
-    get_password_new(): boolean
-    /**
-     * Get indication of the password strength.
-     * 
-     * Prompts will return a zero value if the password is empty, and a value
-     * greater than zero if the password has any characters.
-     * 
-     * This is only valid after a successful prompt for a password.
-     * @returns zero if the password is empty, greater than zero if not
-     */
-    get_password_strength(): number
-    /**
-     * Gets the title of the prompt.
-     * 
-     * A prompt implementation may choose not to display the prompt title. The
-     * prompt message should contain relevant information.
-     * @returns a newly allocated string containing the prompt          title.
-     */
-    get_title(): string | null
-    /**
-     * Get a prompt warning displayed on the prompt.
-     * 
-     * This is a warning like "The password is incorrect." usually displayed to the
-     * user about a previous 'unsuccessful' prompt.
-     * 
-     * If this string is %NULL then no warning is displayed.
-     * @returns a newly allocated string containing the prompt          warning, or %NULL if no warning
-     */
-    get_warning(): string | null
-    /**
-     * Prompts for password. Set the various properties on the prompt before calling
-     * this method to explain which password should be entered.
-     * 
-     * This method will block until the a response is returned from the prompter.
-     * 
-     * A password will be returned if the user enters a password successfully.
-     * The returned password is valid until the next time a method is called
-     * to display another prompt.
-     * 
-     * %NULL will be returned if the user cancels or if an error occurs. Check the
-     * `error` argument to tell the difference.
-     * @param cancellable optional cancellation object
-     * @returns the password owned by the prompt, or %NULL
-     */
-    password(cancellable: Gio.Cancellable | null): string | null
-    /**
-     * Prompts for password. Set the various properties on the prompt before calling
-     * this method to explain which password should be entered.
-     * 
-     * This method will return immediately and complete asynchronously.
-     * @param cancellable optional cancellation object
-     * @param callback called when the operation completes
-     */
-    password_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of password_async
-
-    /**
-     * Promisified version of {@link password_async}
-     * 
-     * Prompts for password. Set the various properties on the prompt before calling
-     * this method to explain which password should be entered.
-     * 
-     * This method will return immediately and complete asynchronously.
-     * @param cancellable optional cancellation object
-     * @returns A Promise of: the password owned by the prompt, or %NULL
-     */
-    password_async(cancellable: Gio.Cancellable | null): globalThis.Promise<string | null>
-    /**
-     * Complete an operation to prompt for a password.
-     * 
-     * A password will be returned if the user enters a password successfully.
-     * The returned password is valid until the next time a method is called
-     * to display another prompt.
-     * 
-     * %NULL will be returned if the user cancels or if an error occurs. Check the
-     * `error` argument to tell the difference.
-     * @param result asynchronous result passed to callback
-     * @returns the password owned by the prompt, or %NULL
-     */
-    password_finish(result: Gio.AsyncResult): string | null
-    /**
-     * Prompts for password. Set the various properties on the prompt before calling
-     * this method to explain which password should be entered.
-     * 
-     * This method will block until the a response is returned from the prompter
-     * and will run a main loop similar to a gtk_dialog_run(). The application
-     * will remain responsive but care must be taken to handle reentrancy issues.
-     * 
-     * A password will be returned if the user enters a password successfully.
-     * The returned password is valid until the next time a method is called
-     * to display another prompt.
-     * 
-     * %NULL will be returned if the user cancels or if an error occurs. Check the
-     * `error` argument to tell the difference.
-     * @param cancellable optional cancellation object
-     * @returns the password owned by the prompt, or %NULL
-     */
-    password_run(cancellable: Gio.Cancellable | null): string | null
-    /**
-     * Reset the contents and properties of the prompt.
-     */
-    reset(): void
-    /**
-     * Set the string handle of the caller's window.
-     * 
-     * The caller window indicates to the prompt which window is prompting the
-     * user. The prompt may choose to ignore this information or use it in whatever
-     * way it sees fit.
-     * @param window_id the window id
-     */
-    set_caller_window(window_id: string | null): void
-    /**
-     * Set the label for the continue button.
-     * 
-     * This is the button that results in a %GCR_PROMPT_REPLY_CANCEL reply
-     * from the prompt.
-     * @param cancel_label the label
-     */
-    set_cancel_label(cancel_label: string | null): void
-    /**
-     * Set whether the additional choice is chosen or not.
-     * 
-     * The additional choice should be set up using gcr_prompt_set_choice_label().
-     * @param chosen whether chosen
-     */
-    set_choice_chosen(chosen: boolean): void
-    /**
-     * Set the label for the additional choice.
-     * 
-     * If this is a non-%NULL value then an additional boolean choice will be
-     * displayed by the prompt allowing the user to select or deselect it.
-     * 
-     * The initial value of the choice can be set with the
-     * gcr_prompt_set_choice_label() method.
-     * 
-     * If this is %NULL, then no additional choice is being displayed.
-     * @param choice_label the additional choice or %NULL
-     */
-    set_choice_label(choice_label: string | null): void
-    /**
-     * Set the label for the continue button.
-     * 
-     * This is the button that results in a %GCR_PROMPT_REPLY_CONTINUE reply
-     * from the prompt.
-     * @param continue_label the label
-     */
-    set_continue_label(continue_label: string | null): void
-    /**
-     * Set the detailed description of the prompt.
-     * 
-     * A prompt implementation may choose not to display this detailed description.
-     * Use gcr_prompt_set_message() to set a general message containing relevant
-     * information.
-     * @param description the detailed description
-     */
-    set_description(description: string | null): void
-    /**
-     * Sets the prompt message for the user.
-     * 
-     * A prompt implementation should always display this message.
-     * @param message the prompt message
-     */
-    set_message(message: string | null): void
-    /**
-     * Set whether the prompt will prompt for a new password.
-     * 
-     * This will cause the prompt implementation to ask the user to confirm the
-     * password and/or display other relevant user interface for creating a new
-     * password.
-     * @param new_password whether in new password mode or not
-     */
-    set_password_new(new_password: boolean): void
-    /**
-     * Sets the title of the prompt.
-     * 
-     * A prompt implementation may choose not to display the prompt title. The
-     * prompt message should contain relevant information.
-     * @param title the prompt title
-     */
-    set_title(title: string | null): void
-    /**
-     * Set a prompt warning displayed on the prompt.
-     * 
-     * This is a warning like "The password is incorrect." usually displayed to the
-     * user about a previous 'unsuccessful' prompt.
-     * 
-     * If this string is %NULL then no warning is displayed.
-     * @param warning the warning or %NULL
-     */
-    set_warning(warning: string | null): void
-
-    // Own virtual methods of Gcr-4.Gcr.Prompt
-
-    vfunc_prompt_close(): void
-    /**
-     * Prompts for confirmation asking a cancel/continue style question.
-     * Set the various properties on the prompt before calling this method to
-     * represent the question correctly.
-     * 
-     * This method will return immediately and complete asynchronously.
-     * @virtual 
-     * @param cancellable optional cancellation object
-     * @param callback called when the operation completes
-     */
-    vfunc_prompt_confirm_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-    /**
-     * Complete an operation to prompt for confirmation.
-     * 
-     * %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The
-     * return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if
-     * an error occurs. Check the `error` argument to tell the difference.
-     * @virtual 
-     * @param result asynchronous result passed to callback
-     * @returns the reply from the prompt
-     */
-    vfunc_prompt_confirm_finish(result: Gio.AsyncResult): PromptReply
-    /**
-     * Prompts for password. Set the various properties on the prompt before calling
-     * this method to explain which password should be entered.
-     * 
-     * This method will return immediately and complete asynchronously.
-     * @virtual 
-     * @param cancellable optional cancellation object
-     * @param callback called when the operation completes
-     */
-    vfunc_prompt_password_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-    /**
-     * Complete an operation to prompt for a password.
-     * 
-     * A password will be returned if the user enters a password successfully.
-     * The returned password is valid until the next time a method is called
-     * to display another prompt.
-     * 
-     * %NULL will be returned if the user cancels or if an error occurs. Check the
-     * `error` argument to tell the difference.
-     * @virtual 
-     * @param result asynchronous result passed to callback
-     * @returns the password owned by the prompt, or %NULL
-     */
-    vfunc_prompt_password_finish(result: Gio.AsyncResult): string | null
-
-    // Own signals of Gcr-4.Gcr.Prompt
-
-    connect(sigName: "prompt-close", callback: Prompt.PromptCloseSignalCallback): number
-    connect_after(sigName: "prompt-close", callback: Prompt.PromptCloseSignalCallback): number
-    emit(sigName: "prompt-close", ...args: any[]): void
-
-    // Class property signals of Gcr-4.Gcr.Prompt
-
-    connect(sigName: "notify::caller-window", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::caller-window", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::caller-window", ...args: any[]): void
-    connect(sigName: "notify::cancel-label", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::cancel-label", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::cancel-label", ...args: any[]): void
-    connect(sigName: "notify::choice-chosen", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::choice-chosen", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::choice-chosen", ...args: any[]): void
-    connect(sigName: "notify::choice-label", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::choice-label", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::choice-label", ...args: any[]): void
-    connect(sigName: "notify::continue-label", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::continue-label", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::continue-label", ...args: any[]): void
-    connect(sigName: "notify::description", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::description", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::description", ...args: any[]): void
-    connect(sigName: "notify::message", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::message", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::message", ...args: any[]): void
-    connect(sigName: "notify::password-new", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::password-new", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::password-new", ...args: any[]): void
-    connect(sigName: "notify::password-strength", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::password-strength", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::password-strength", ...args: any[]): void
-    connect(sigName: "notify::title", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::title", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::title", ...args: any[]): void
-    connect(sigName: "notify::warning", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::warning", callback: (($obj: Prompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::warning", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * A prompt displayed to the user. It is an interface with various
- * implementations.
- * 
- * Various properties are set on the prompt, and then the prompt is displayed
- * the various prompt methods like [method`Prompt`.password_run].
- * 
- * A `GcrPrompt` may be used to display multiple related prompts. Most
- * implementions do not hide the window between display of multiple related
- * prompts, and the #GcrPrompt must be closed or destroyed in order to make
- * it go away. This allows the user to see that the prompts are related.
- * 
- * Use `GcrPromptDialog` (part of gcr-ui) to create an in-process GTK+ dialog
- * prompt. Use [class`SystemPrompt]` to create a system prompt in a prompter
- * process.
- * 
- * The prompt implementation will always display the [property`Prompt:`message]
- * property, but may choose not to display the [property`Prompt:`description] or
- * [property`Prompt:`title] properties.
- * @interface 
- */
-export class Prompt extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.Prompt
-
-    static name: string
-    static $gtype: GObject.GType<Prompt>
-
-    // Constructors of Gcr-4.Gcr.Prompt
-
-    constructor(config?: Prompt.ConstructorProperties) 
-    _init(config?: Prompt.ConstructorProperties): void
-}
-
-export module CertificateChain {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-    }
-
-}
-
-export interface CertificateChain {
-
-    // Own properties of Gcr-4.Gcr.CertificateChain
-
-    /**
-     * The length of the certificate chain.
-     */
-    readonly length: number
-
-    // Own fields of Gcr-4.Gcr.CertificateChain
-
-    parent: GObject.Object
-
-    // Owm methods of Gcr-4.Gcr.CertificateChain
-
-    /**
-     * Add `certificate` to the chain. The order of certificates in the chain are
-     * important. The first certificate should be the endpoint certificate, and
-     * then come the signers (certificate authorities) each in turn. If a root
-     * certificate authority is present, it should come last.
-     * 
-     * Adding a certificate an already built chain (see
-     * gcr_certificate_chain_build()) resets the type of the certificate chain
-     * to %GCR_CERTIFICATE_CHAIN_UNKNOWN
-     * @param certificate a #GcrCertificate to add to the chain
-     */
-    add(certificate: Certificate): void
-    /**
-     * Complete a certificate chain. Once a certificate chain has been built
-     * its status can be examined.
-     * 
-     * This operation will lookup missing certificates in PKCS#11
-     * modules and also that each certificate in the chain is the signer of the
-     * previous one. If a trust anchor, pinned certificate, or self-signed certificate
-     * is found, then the chain is considered built. Any extra certificates are
-     * removed from the chain.
-     * 
-     * It's important to understand that building of a certificate chain does not
-     * constitute verifying that chain. This is merely the first step towards
-     * trust verification.
-     * 
-     * The `purpose` is a string like %GCR_PURPOSE_CLIENT_AUTH and is the purpose
-     * for which the certificate chain will be used. Trust anchors are looked up
-     * for this purpose. This argument is required.
-     * 
-     * The `peer` is usually the host name of the peer whith which this certificate
-     * chain is being used. It is used to look up pinned certificates that have
-     * been stored for this peer. If %NULL then no pinned certificates will
-     * be considered.
-     * 
-     * If the %GCR_CERTIFICATE_CHAIN_NO_LOOKUPS flag is specified then no
-     * lookups for anchors or pinned certificates are done, and the resulting chain
-     * will be neither anchored or pinned. Additionally no missing certificate
-     * authorities are looked up in PKCS#11
-     * 
-     * This call will block, see gcr_certificate_chain_build_async() for the
-     * asynchronous version.
-     * @param purpose the purpose the certificate chain will be used for
-     * @param peer the peer the certificate chain will be used with, or %NULL
-     * @param flags chain completion flags
-     * @param cancellable a #GCancellable or %NULL
-     * @returns whether the operation completed successfully
-     */
-    build(purpose: string | null, peer: string | null, flags: CertificateChainFlags, cancellable: Gio.Cancellable | null): boolean
-    /**
-     * Complete a certificate chain. Once a certificate chain has been built
-     * its status can be examined.
-     * 
-     * This will lookup missing certificates in PKCS#11
-     * modules and also that each certificate in the chain is the signer of the
-     * previous one. If a trust anchor, pinned certificate, or self-signed certificate
-     * is found, then the chain is considered built. Any extra certificates are
-     * removed from the chain.
-     * 
-     * It's important to understand that building of a certificate chain does not
-     * constitute verifying that chain. This is merely the first step towards
-     * trust verification.
-     * 
-     * The `purpose` is a string like %GCR_PURPOSE_CLIENT_AUTH and is the purpose
-     * for which the certificate chain will be used. Trust anchors are looked up
-     * for this purpose. This argument is required.
-     * 
-     * The `peer` is usually the host name of the peer whith which this certificate
-     * chain is being used. It is used to look up pinned certificates that have
-     * been stored for this peer. If %NULL then no pinned certificates will
-     * be considered.
-     * 
-     * If the %GCR_CERTIFICATE_CHAIN_NO_LOOKUPS flag is specified then no
-     * lookups for anchors or pinned certificates are done, and the resulting chain
-     * will be neither anchored or pinned. Additionally no missing certificate
-     * authorities are looked up in PKCS#11
-     * 
-     * When the operation is finished, `callback` will be called. You can then call
-     * gcr_certificate_chain_build_finish() to get the result of the operation.
-     * @param purpose the purpose the certificate chain will be used for
-     * @param peer the peer the certificate chain will be used with, or %NULL
-     * @param flags chain completion flags
-     * @param cancellable a #GCancellable or %NULL
-     * @param callback this will be called when the operation completes.
-     */
-    build_async(purpose: string | null, peer: string | null, flags: CertificateChainFlags, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of build_async
-
-    /**
-     * Promisified version of {@link build_async}
-     * 
-     * Complete a certificate chain. Once a certificate chain has been built
-     * its status can be examined.
-     * 
-     * This will lookup missing certificates in PKCS#11
-     * modules and also that each certificate in the chain is the signer of the
-     * previous one. If a trust anchor, pinned certificate, or self-signed certificate
-     * is found, then the chain is considered built. Any extra certificates are
-     * removed from the chain.
-     * 
-     * It's important to understand that building of a certificate chain does not
-     * constitute verifying that chain. This is merely the first step towards
-     * trust verification.
-     * 
-     * The `purpose` is a string like %GCR_PURPOSE_CLIENT_AUTH and is the purpose
-     * for which the certificate chain will be used. Trust anchors are looked up
-     * for this purpose. This argument is required.
-     * 
-     * The `peer` is usually the host name of the peer whith which this certificate
-     * chain is being used. It is used to look up pinned certificates that have
-     * been stored for this peer. If %NULL then no pinned certificates will
-     * be considered.
-     * 
-     * If the %GCR_CERTIFICATE_CHAIN_NO_LOOKUPS flag is specified then no
-     * lookups for anchors or pinned certificates are done, and the resulting chain
-     * will be neither anchored or pinned. Additionally no missing certificate
-     * authorities are looked up in PKCS#11
-     * 
-     * When the operation is finished, `callback` will be called. You can then call
-     * gcr_certificate_chain_build_finish() to get the result of the operation.
-     * @param purpose the purpose the certificate chain will be used for
-     * @param peer the peer the certificate chain will be used with, or %NULL
-     * @param flags chain completion flags
-     * @param cancellable a #GCancellable or %NULL
-     * @returns A Promise of: whether the operation succeeded
-     */
-    build_async(purpose: string | null, peer: string | null, flags: CertificateChainFlags, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-    /**
-     * Finishes an asynchronous operation started by
-     * gcr_certificate_chain_build_async().
-     * @param result the #GAsyncResult passed to the callback
-     * @returns whether the operation succeeded
-     */
-    build_finish(result: Gio.AsyncResult): boolean
-    /**
-     * If the certificate chain has been built and is of status
-     * %GCR_CERTIFICATE_CHAIN_ANCHORED, then this will return the anchor
-     * certificate that was found. This is not necessarily a root certificate
-     * authority. If an intermediate certificate authority in the chain was
-     * found to be anchored, then that certificate will be returned.
-     * 
-     * If an anchor is returned it does not mean that the certificate chain has
-     * been verified, but merely that an anchor has been found.
-     * @returns the anchor certificate, or %NULL if not anchored.
-     */
-    get_anchor(): Certificate
-    /**
-     * Get a certificate in the chain. It is an error to call this function
-     * with an invalid index.
-     * @param index index of the certificate to get
-     * @returns the certificate
-     */
-    get_certificate(index: number): Certificate
-    /**
-     * Get the endpoint certificate in the chain. This is always the first
-     * certificate in the chain. The endpoint certificate cannot be anchored.
-     * @returns the endpoint certificate, or %NULL if the chain          is empty
-     */
-    get_endpoint(): Certificate
-    /**
-     * Get the length of the certificate chain.
-     * @returns the length of the certificate chain
-     */
-    get_length(): number
-    /**
-     * Get the status of a certificate chain. If the certificate chain has not
-     * been built, then the status will be %GCR_CERTIFICATE_CHAIN_UNKNOWN.
-     * 
-     * A status of %GCR_CERTIFICATE_CHAIN_ANCHORED does not mean that the
-     * certificate chain has been verified, but merely that an anchor has been
-     * found.
-     * @returns the status of the certificate chain.
-     */
-    get_status(): CertificateChainStatus
-
-    // Class property signals of Gcr-4.Gcr.CertificateChain
-
-    connect(sigName: "notify::length", callback: (($obj: CertificateChain, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::length", callback: (($obj: CertificateChain, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::length", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * Represents a chain of certificates, normally used to
- * validate the trust in a certificate. An X.509 certificate chain has one
- * endpoint certificate (the one for which trust is being verified) and then
- * in turn the certificate that issued each previous certificate in the chain.
- * 
- * This functionality is for building of certificate chains not for validating
- * them. Use your favorite crypto library to validate trust in a certificate
- * chain once its built.
- * 
- * The order of certificates in the chain should be first the endpoint
- * certificates and then the signing certificates.
- * 
- * Create a new certificate chain with [ctor`CertificateChain`.new] and then
- * add the certificates with [method`CertificateChain`.add].
- * 
- * You can then use [method`CertificateChain`.build] to build the remainder of
- * the chain. This will lookup missing certificates in PKCS#11 modules and
- * also check that each certificate in the chain is the signer of the previous
- * one. If a trust anchor, pinned certificate, or self-signed certificate is
- * found, then the chain is considered built. Any extra certificates are
- * removed from the chain.
- * 
- * Once the certificate chain has been built, you can access its status
- * through [method`CertificateChain`.get_status]. The status signifies whether
- * the chain is anchored on a trust root, self-signed, incomplete etc. See
- * [enum`CertificateChainStatus]` for information on the various statuses.
- * 
- * It's important to understand that the building of a certificate chain is
- * merely the first step towards verifying trust in a certificate.
- * @class 
- */
-export class CertificateChain extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.CertificateChain
-
-    static name: string
-    static $gtype: GObject.GType<CertificateChain>
-
-    // Constructors of Gcr-4.Gcr.CertificateChain
-
-    constructor(config?: CertificateChain.ConstructorProperties) 
-    /**
-     * Create a new #GcrCertificateChain.
-     * @constructor 
-     * @returns a newly allocated certificate chain
-     */
-    constructor() 
-    /**
-     * Create a new #GcrCertificateChain.
-     * @constructor 
-     * @returns a newly allocated certificate chain
-     */
-    static new(): CertificateChain
-    _init(config?: CertificateChain.ConstructorProperties): void
-}
-
-export module CertificateField {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.CertificateField
-
-        label?: string | null
-        section?: CertificateSection | null
-    }
-
-}
-
-export interface CertificateField {
-
-    // Own properties of Gcr-4.Gcr.CertificateField
-
-    readonly label: string | null
-    readonly section: CertificateSection
-    readonly value: any
-
-    // Owm methods of Gcr-4.Gcr.CertificateField
-
-    /**
-     * Get the display label of the field.
-     * @returns the display label of the field
-     */
-    get_label(): string | null
-    /**
-     * Get the parent #GcrCertificateSection.
-     * @returns the parent #GcrCertificateSection
-     */
-    get_section(): CertificateSection
-    /**
-     * Get the value of the field.
-     * 
-     * The `value` will have been initialized to the `GType` the value should be
-     * provided in.
-     * @returns %TRUE if the value was set successfully.
-     */
-    get_value(): [ /* returnType */ boolean, /* value */ any ]
-    /**
-     * Get the type associated with the value.
-     * @returns The `GType` of the value
-     */
-    get_value_type(): GObject.GType
-
-    // Class property signals of Gcr-4.Gcr.CertificateField
-
-    connect(sigName: "notify::label", callback: (($obj: CertificateField, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::label", callback: (($obj: CertificateField, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::label", ...args: any[]): void
-    connect(sigName: "notify::section", callback: (($obj: CertificateField, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::section", callback: (($obj: CertificateField, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::section", ...args: any[]): void
-    connect(sigName: "notify::value", callback: (($obj: CertificateField, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::value", callback: (($obj: CertificateField, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::value", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-export class CertificateField extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.CertificateField
-
-    static name: string
-    static $gtype: GObject.GType<CertificateField>
-
-    // Constructors of Gcr-4.Gcr.CertificateField
-
-    constructor(config?: CertificateField.ConstructorProperties) 
-    _init(config?: CertificateField.ConstructorProperties): void
-}
-
-export module CertificateRequest {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.CertificateRequest
-
-        /**
-         * The private key that this certificate request is for.
-         */
-        private_key?: Gck.Object | null
-    }
-
-}
-
-export interface CertificateRequest {
-
-    // Own properties of Gcr-4.Gcr.CertificateRequest
-
-    /**
-     * The private key that this certificate request is for.
-     */
-    readonly private_key: Gck.Object
-
-    // Owm methods of Gcr-4.Gcr.CertificateRequest
-
-    /**
-     * Complete and sign a certificate request, so that it can be encoded
-     * and sent to a certificate authority.
-     * 
-     * This call may block as it signs the request using the private key.
-     * @param cancellable a cancellation object
-     * @returns whether certificate request was successfully completed or not
-     */
-    complete(cancellable: Gio.Cancellable | null): boolean
-    /**
-     * Asynchronously complete and sign a certificate request, so that it can
-     * be encoded and sent to a certificate authority.
-     * 
-     * This call will return immediately and complete later.
-     * @param cancellable a cancellation object
-     * @param callback called when the operation completes
-     */
-    complete_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of complete_async
-
-    /**
-     * Promisified version of {@link complete_async}
-     * 
-     * Asynchronously complete and sign a certificate request, so that it can
-     * be encoded and sent to a certificate authority.
-     * 
-     * This call will return immediately and complete later.
-     * @param cancellable a cancellation object
-     * @returns A Promise of: whether certificate request was successfully completed or not
-     */
-    complete_async(cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-    /**
-     * Finish an asynchronous operation to complete and sign a certificate
-     * request.
-     * @param result result of the asynchronous operation
-     * @returns whether certificate request was successfully completed or not
-     */
-    complete_finish(result: Gio.AsyncResult): boolean
-    /**
-     * Encode the certificate request. It must have been completed with
-     * [method`CertificateRequest`.complete] or
-     * [method`CertificateRequest`.complete_async].
-     * 
-     * If `textual` is %FALSE, the output is a DER encoded certificate request.
-     * 
-     * If `textual` is %TRUE, the output is encoded as text. For PKCS#10 requests
-     * this is done using the OpenSSL style PEM encoding.
-     * @param textual whether to encode output as text
-     * @returns the encoded certificate request
-     */
-    encode(textual: boolean): Uint8Array
-    /**
-     * Get the format of this certificate request.
-     * @returns the format
-     */
-    get_format(): CertificateRequestFormat
-    /**
-     * Get the private key this certificate request is for.
-     * @returns the private key,
-     */
-    get_private_key(): Gck.Object
-    /**
-     * Set the common name encoded in the certificate request.
-     * @param cn common name to set on the request
-     */
-    set_cn(cn: string | null): void
-
-    // Class property signals of Gcr-4.Gcr.CertificateRequest
-
-    connect(sigName: "notify::private-key", callback: (($obj: CertificateRequest, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::private-key", callback: (($obj: CertificateRequest, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::private-key", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * An object that allows creation of certificate requests. A certificate
- * request is sent to a certificate authority to request an X.509 certificate.
- * 
- * Use [func`CertificateRequest`.prepare] to create a blank certificate
- * request for a given private key. Set the common name on the certificate
- * request with [method`CertificateRequest`.set_cn], and then sign the request
- * with [method`CertificateRequest`.complete_async].
- * @class 
- */
-export class CertificateRequest extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.CertificateRequest
-
-    static name: string
-    static $gtype: GObject.GType<CertificateRequest>
-
-    // Constructors of Gcr-4.Gcr.CertificateRequest
-
-    constructor(config?: CertificateRequest.ConstructorProperties) 
-    _init(config?: CertificateRequest.ConstructorProperties): void
-    /**
-     * Check whether [class`CertificateRequest]` is capable of creating a request
-     * for the given `private_key`.
-     * @param private_key a private key
-     * @param cancellable cancellation object
-     * @returns whether a request can be created
-     */
-    static capable(private_key: Gck.Object, cancellable: Gio.Cancellable | null): boolean
-    /**
-     * Asynchronously check whether [class`CertificateRequest]` is capable of
-     * creating a request for the given `private_key`.
-     * @param private_key a private key
-     * @param cancellable cancellation object
-     * @param callback will be called when the operation completes
-     */
-    static capable_async(private_key: Gck.Object, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<CertificateRequest> | null): void
-    /**
-     * Get the result for asynchronously check whether [class`CertificateRequest]` is
-     * capable of creating a request for the given `private_key`.
-     * @param result asynchronous result
-     * @returns whether a request can be created
-     */
-    static capable_finish(result: Gio.AsyncResult): boolean
-    /**
-     * Create a new certificate request, in the given format for the private key.
-     * @param format the format for the certificate request
-     * @param private_key the private key the the certificate is being requested for
-     * @returns a new #GcrCertificate request
-     */
-    static prepare(format: CertificateRequestFormat, private_key: Gck.Object): CertificateRequest
-}
-
-export module CertificateSection {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.CertificateSection
-
-        label?: string | null
-    }
-
-}
-
-export interface CertificateSection {
-
-    // Own properties of Gcr-4.Gcr.CertificateSection
-
-    readonly fields: Gio.ListModel
-    readonly label: string | null
-
-    // Owm methods of Gcr-4.Gcr.CertificateSection
-
-    /**
-     * Get the list of all the fields in this section.
-     * @returns a #GListModel of #GcrCertificateField
-     */
-    get_fields(): Gio.ListModel
-    /**
-     * Get the flags.
-     * @returns the `GcrCertificateSectionFlags`
-     */
-    get_flags(): CertificateSectionFlags
-    /**
-     * Get the displayable label of the section.
-     * @returns the displayable label of the section
-     */
-    get_label(): string | null
-
-    // Class property signals of Gcr-4.Gcr.CertificateSection
-
-    connect(sigName: "notify::fields", callback: (($obj: CertificateSection, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::fields", callback: (($obj: CertificateSection, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::fields", ...args: any[]): void
-    connect(sigName: "notify::label", callback: (($obj: CertificateSection, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::label", callback: (($obj: CertificateSection, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::label", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-export class CertificateSection extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.CertificateSection
-
-    static name: string
-    static $gtype: GObject.GType<CertificateSection>
-
-    // Constructors of Gcr-4.Gcr.CertificateSection
-
-    constructor(config?: CertificateSection.ConstructorProperties) 
-    _init(config?: CertificateSection.ConstructorProperties): void
-}
-
-export module Parser {
-
-    // Signal callback interfaces
-
-    /**
-     * Signal callback interface for `authenticate`
-     */
-    export interface AuthenticateSignalCallback {
-        ($obj: Parser, count: number): boolean
-    }
-
-    /**
-     * Signal callback interface for `parsed`
-     */
-    export interface ParsedSignalCallback {
-        ($obj: Parser): void
-    }
-
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-    }
-
-}
-
-export interface Parser {
-
-    // Own properties of Gcr-4.Gcr.Parser
-
-    /**
-     * Get the attributes that make up the currently parsed item. This is
-     * generally only valid during a [signal`Parser:`:parsed] signal.
-     */
-    readonly parsed_attributes: Gck.Attributes
-    /**
-     * The description of the type of the currently parsed item. This is generally
-     * only valid during a [signal`Parser:`:parsed] signal.
-     */
-    readonly parsed_description: string | null
-    /**
-     * The label of the currently parsed item. This is generally
-     * only valid during a [signal`Parser:`:parsed] signal.
-     */
-    readonly parsed_label: string | null
-
-    // Own fields of Gcr-4.Gcr.Parser
-
-    parent: GObject.Object
-
-    // Owm methods of Gcr-4.Gcr.Parser
-
-    /**
-     * Add a password to the set of passwords to try when parsing locked or encrypted
-     * items. This is usually called from the [signal`Parser:`:authenticate] signal.
-     * @param password a password to try
-     */
-    add_password(password: string | null): void
-    /**
-     * Disable parsing of the given format. Use %GCR_FORMAT_ALL to disable all the formats.
-     * @param format The format identifier
-     */
-    format_disable(format: DataFormat): void
-    /**
-     * Enable parsing of the given format. Use %GCR_FORMAT_ALL to enable all the formats.
-     * @param format The format identifier
-     */
-    format_enable(format: DataFormat): void
-    /**
-     * Check whether the given format is supported by the parser.
-     * @param format The format identifier
-     * @returns Whether the format is supported.
-     */
-    format_supported(format: DataFormat): boolean
-    /**
-     * Get the filename of the parser item.
-     * @returns the filename set on the parser, or %NULL
-     */
-    get_filename(): string | null
-    /**
-     * Get the currently parsed item
-     * @returns the currently parsed item
-     */
-    get_parsed(): Parsed
-    /**
-     * Get the attributes which make up the currently parsed item. This is generally
-     * only valid during the [signal`Parser:`:parsed] signal.
-     * @returns the attributes for the current item,          which are owned by the parser and should not be freed
-     */
-    get_parsed_attributes(): Gck.Attributes | null
-    /**
-     * Get the raw data block that represents this parsed object. This is only
-     * valid during the [signal`Parser:`:parsed] signal.
-     * @returns the raw data          block of the currently parsed item; the value is owned by the parser          and should not be freed
-     */
-    get_parsed_block(): Uint8Array | null
-    /**
-     * Get the raw data block that represents this parsed object. This is only
-     * valid during the [signal`Parser:`:parsed] signal.
-     * @returns the raw data block of the currently parsed item
-     */
-    get_parsed_bytes(): GLib.Bytes
-    /**
-     * Get a description for the type of the currently parsed item. This is generally
-     * only valid during the [signal`Parser:`:parsed] signal.
-     * @returns the description for the current item; this is owned by          the parser and should not be freed
-     */
-    get_parsed_description(): string | null
-    /**
-     * Get the format of the raw data block that represents this parsed object.
-     * This corresponds with the data returned from
-     * [method`Parser`.get_parsed_block].
-     * 
-     * This is only valid during the [signal`Parser:`:parsed] signal.
-     * @returns the data format of the currently parsed item
-     */
-    get_parsed_format(): DataFormat
-    /**
-     * Get the label of the currently parsed item. This is generally only valid
-     * during the [signal`Parser:`:parsed] signal.
-     * @returns the label of the currently parsed item. The value is          owned by the parser and should not be freed.
-     */
-    get_parsed_label(): string | null
-    /**
-     * Parse the data. The [signal`Parser:`:parsed] and
-     * [signal`Parser:`:authenticate] signals may fire during the parsing.
-     * @param data the data to parse
-     * @returns Whether the data was parsed successfully or not.
-     */
-    parse_bytes(data: GLib.Bytes): boolean
-    /**
-     * Parse the data. The [signal`Parser:`:parsed] and [signal`Parser:`:authenticate]
-     * signals may fire during the parsing.
-     * 
-     * A copy of the data will be made. Use [method`Parser`.parse_bytes] to avoid
-     * this.
-     * @param data the data to parse
-     * @returns Whether the data was parsed successfully or not.
-     */
-    parse_data(data: Uint8Array): boolean
-    /**
-     * Parse items from the data in a #GInputStream. This function may block while
-     * reading from the input stream. Use [method`Parser`.parse_stream_async] for
-     * a non-blocking variant.
-     * 
-     * The [signal`Parser:`:parsed] and [signal`Parser:`:authenticate] signals
-     * may fire during the parsing.
-     * @param input The input stream
-     * @param cancellable An optional cancellation object
-     * @returns Whether the parsing completed successfully or not.
-     */
-    parse_stream(input: Gio.InputStream, cancellable: Gio.Cancellable | null): boolean
-    /**
-     * Parse items from the data in a #GInputStream. This function completes
-     * asyncronously and doesn't block.
-     * 
-     * The [signal`Parser:`:parsed] and [signal`Parser:`:authenticate] signals
-     * may fire during the parsing.
-     * @param input The input stream
-     * @param cancellable An optional cancellation object
-     * @param callback Called when the operation result is ready.
-     */
-    parse_stream_async(input: Gio.InputStream, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of parse_stream_async
-
-    /**
-     * Promisified version of {@link parse_stream_async}
-     * 
-     * Parse items from the data in a #GInputStream. This function completes
-     * asyncronously and doesn't block.
-     * 
-     * The [signal`Parser:`:parsed] and [signal`Parser:`:authenticate] signals
-     * may fire during the parsing.
-     * @param input The input stream
-     * @param cancellable An optional cancellation object
-     * @returns A Promise of: Whether the parsing completed successfully or not.
-     */
-    parse_stream_async(input: Gio.InputStream, cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-    /**
-     * Complete an operation to parse a stream.
-     * @param result The operation result
-     * @returns Whether the parsing completed successfully or not.
-     */
-    parse_stream_finish(result: Gio.AsyncResult): boolean
-    /**
-     * Sets the filename of the parser item.
-     * @param filename a string of the filename of the parser item
-     */
-    set_filename(filename: string | null): void
-
-    // Own virtual methods of Gcr-4.Gcr.Parser
-
-    vfunc_authenticate(count: number): boolean
-    vfunc_parsed(): void
-
-    // Own signals of Gcr-4.Gcr.Parser
-
-    connect(sigName: "authenticate", callback: Parser.AuthenticateSignalCallback): number
-    connect_after(sigName: "authenticate", callback: Parser.AuthenticateSignalCallback): number
-    emit(sigName: "authenticate", count: number, ...args: any[]): void
-    connect(sigName: "parsed", callback: Parser.ParsedSignalCallback): number
-    connect_after(sigName: "parsed", callback: Parser.ParsedSignalCallback): number
-    emit(sigName: "parsed", ...args: any[]): void
-
-    // Class property signals of Gcr-4.Gcr.Parser
-
-    connect(sigName: "notify::parsed-attributes", callback: (($obj: Parser, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::parsed-attributes", callback: (($obj: Parser, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::parsed-attributes", ...args: any[]): void
-    connect(sigName: "notify::parsed-description", callback: (($obj: Parser, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::parsed-description", callback: (($obj: Parser, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::parsed-description", ...args: any[]): void
-    connect(sigName: "notify::parsed-label", callback: (($obj: Parser, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::parsed-label", callback: (($obj: Parser, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::parsed-label", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * A parser for parsing various types of files or data.
- * 
- * A `GcrParser` can parse various certificate and key files such as OpenSSL
- * PEM files, DER encoded certifictes, PKCS#8 keys and so on. Each various
- * format is identified by a value in the [enum`DataFormat]` enumeration.
- * 
- * In order to parse data, a new parser is created with gcr_parser_new() and
- * then the [signal`Parser:`:authenticate] and [signal`Parser:`:parsed] signals
- * should be connected to. Data is then fed to the parser via
- * [method`Parser`.parse_data] or [method`Parser`.parse_stream].
- * 
- * During the [signal`Parser:`:parsed] signal the attributes that make up the
- * currently parsed item can be retrieved using the
- * [method`Parser`.get_parsed_attributes] function.
- * @class 
- */
-export class Parser extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.Parser
-
-    static name: string
-    static $gtype: GObject.GType<Parser>
-
-    // Constructors of Gcr-4.Gcr.Parser
-
-    constructor(config?: Parser.ConstructorProperties) 
-    /**
-     * Create a new #GcrParser
-     * @constructor 
-     * @returns a newly allocated #GcrParser
-     */
-    constructor() 
-    /**
-     * Create a new #GcrParser
-     * @constructor 
-     * @returns a newly allocated #GcrParser
-     */
-    static new(): Parser
-    _init(config?: Parser.ConstructorProperties): void
-}
-
-export module Pkcs11Certificate {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends Certificate.ConstructorProperties, Gck.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.Pkcs11Certificate
-
-        /**
-         * Automatically loaded attributes for this certificate.
-         */
-        attributes?: Gck.Attributes | null
-    }
-
-}
-
-export interface Pkcs11Certificate extends Certificate {
-
-    // Own properties of Gcr-4.Gcr.Pkcs11Certificate
-
-    /**
-     * Automatically loaded attributes for this certificate.
-     */
-    readonly attributes: Gck.Attributes
-
-    // Own fields of Gcr-4.Gcr.Pkcs11Certificate
-
-    parent: Gck.Object
-
-    // Owm methods of Gcr-4.Gcr.Pkcs11Certificate
-
-    /**
-     * Access the automatically loaded attributes for this certificate.
-     * @returns the certificate attributes
-     */
-    get_attributes(): Gck.Attributes
-
-    // Conflicting methods
-
-    /**
-     * Get the data for the specified attribute from the object. For convenience
-     * the returned data has a null terminator.
-     * 
-     * This call may block for an indefinite period.
-     * @param attr_type The attribute to get data for.
-     * @param cancellable A #GCancellable or %NULL
-     * @returns the resulting PKCS#11          attribute data, or %NULL if an error occurred
-     */
-    get_data(attr_type: number, cancellable: Gio.Cancellable | null): Uint8Array
-
-    // Overloads of get_data
-
-    /**
-     * Gets a named field from the objects table of associations (see g_object_set_data()).
-     * @param key name of the key for that association
-     * @returns the data if found,          or %NULL if no such data exists.
-     */
-    get_data(key: string | null): any | null
-    /**
-     * Gets a named field from the objects table of associations (see g_object_set_data()).
-     * @param key name of the key for that association
-     * @returns the data if found,          or %NULL if no such data exists.
-     */
-    get_data(key: string | null): any | null
-
-    // Class property signals of Gcr-4.Gcr.Pkcs11Certificate
-
-    connect(sigName: "notify::attributes", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::attributes", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::attributes", ...args: any[]): void
-    connect(sigName: "notify::handle", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::handle", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::handle", ...args: any[]): void
-    connect(sigName: "notify::module", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::module", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::module", ...args: any[]): void
-    connect(sigName: "notify::session", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::session", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::session", ...args: any[]): void
-    connect(sigName: "notify::description", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::description", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::description", ...args: any[]): void
-    connect(sigName: "notify::expiry-date", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::expiry-date", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::expiry-date", ...args: any[]): void
-    connect(sigName: "notify::issuer-name", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::issuer-name", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::issuer-name", ...args: any[]): void
-    connect(sigName: "notify::label", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::label", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::label", ...args: any[]): void
-    connect(sigName: "notify::subject-name", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::subject-name", callback: (($obj: Pkcs11Certificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::subject-name", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * A certificate loaded from a PKCS#11 storage.
- * It is also a valid [class`Gck`.Object] and can be used as such.
- * 
- * Use gcr_pkcs11_certificate_lookup_issuer() to lookup the issuer of a given
- * certificate in the PKCS#11 store.
- * 
- * Various common PKCS#11 certificate attributes are automatically loaded and
- * are available via gcr_pkcs11_certificate_get_attributes().
- * @class 
- */
-export class Pkcs11Certificate extends Gck.Object {
-
-    // Own properties of Gcr-4.Gcr.Pkcs11Certificate
-
-    static name: string
-    static $gtype: GObject.GType<Pkcs11Certificate>
-
-    // Constructors of Gcr-4.Gcr.Pkcs11Certificate
-
-    constructor(config?: Pkcs11Certificate.ConstructorProperties) 
-    _init(config?: Pkcs11Certificate.ConstructorProperties): void
-    /**
-     * Lookup a certificate in the PKCS#11 storage by the given URI.
-     * 
-     * This call may block, see gcr_pkcs11_certificate_new_from_uri_async() for the
-     * non-blocking version.
-     * 
-     * Will return %NULL if no certificate is found. Use `error` to determine
-     * if an error occurred.
-     * @param pkcs11_uri a A PKCS \#11 URI
-     * @param cancellable a #GCancellable
-     * @returns a new #GcrCertificate, or %NULL
-     */
-    static new_from_uri(pkcs11_uri: string | null, cancellable: Gio.Cancellable | null): Certificate | null
-    /**
-     * Lookup a certificate in the PKCS#11 storage by the given URI.
-     * 
-     * When the operation is finished, callback will be called. You can then call
-     * gcr_pkcs11_certificate_new_from_uri_finish() to get the result of the
-     * operation.
-     * @param pkcs11_uri a A PKCS \#11 URI
-     * @param cancellable a #GCancellable
-     * @param callback a #GAsyncReadyCallback to call when the operation completes
-     */
-    static new_from_uri_async(pkcs11_uri: string | null, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Pkcs11Certificate> | null): void
-    /**
-     * Finishes an asynchronous operation started by
-     * gcr_pkcs11_certificate_new_from_uri_async().
-     * 
-     * Will return %NULL if no certificate is found. Use `error` to determine
-     * if an error occurred.
-     * @param result the #GAsyncResult passed to the callback
-     * @returns a new #GcrCertificate, or %NULL
-     */
-    static new_from_uri_finish(result: Gio.AsyncResult): Certificate | null
-    /**
-     * Lookup a the issuer of a `certificate` in the PKCS#11 storage. The
-     * lookup is done using the issuer DN of the certificate. No certificate chain
-     * verification is done. Use a crypto library to make trust decisions.
-     * 
-     * This call may block, see gcr_pkcs11_certificate_lookup_issuer() for the
-     * non-blocking version.
-     * 
-     * Will return %NULL if no issuer certificate is found. Use `error` to determine
-     * if an error occurred.
-     * @param certificate a #GcrCertificate
-     * @param cancellable a #GCancellable
-     * @returns a new #GcrPkcs11Certificate, or %NULL
-     */
-    static lookup_issuer(certificate: Certificate, cancellable: Gio.Cancellable | null): Certificate
-    /**
-     * Lookup a the issuer of a `certificate` in the PKCS#11 storage. The
-     * lookup is done using the issuer DN of the certificate. No certificate chain
-     * verification is done. Use a crypto library to make trust decisions.
-     * 
-     * When the operation is finished, callback will be called. You can then call
-     * gcr_pkcs11_certificate_lookup_issuer_finish() to get the result of the
-     * operation.
-     * @param certificate a #GcrCertificate
-     * @param cancellable a #GCancellable
-     * @param callback a #GAsyncReadyCallback to call when the operation completes
-     */
-    static lookup_issuer_async(certificate: Certificate, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<Pkcs11Certificate> | null): void
-    /**
-     * Finishes an asynchronous operation started by
-     * gcr_pkcs11_certificate_lookup_issuer_async().
-     * 
-     * Will return %NULL if no issuer certificate is found. Use `error` to determine
-     * if an error occurred.
-     * @param result the #GAsyncResult passed to the callback
-     * @returns a new #GcrPkcs11Certificate, or %NULL
-     */
-    static lookup_issuer_finish(result: Gio.AsyncResult): Certificate
-}
-
-export module SecretExchange {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.SecretExchange
-
-        /**
-         * The protocol being used for the exchange.
-         * 
-         * Will be %NULL if no protocol was specified when creating this object,
-         * and either [method`SecretExchange`.begin] or [method`SecretExchange`.receive]
-         * have not been called successfully.
-         */
-        protocol?: string | null
-    }
-
-}
-
-export interface SecretExchange {
-
-    // Own properties of Gcr-4.Gcr.SecretExchange
-
-    /**
-     * The protocol being used for the exchange.
-     * 
-     * Will be %NULL if no protocol was specified when creating this object,
-     * and either [method`SecretExchange`.begin] or [method`SecretExchange`.receive]
-     * have not been called successfully.
-     */
-    readonly protocol: string | null
-
-    // Owm methods of Gcr-4.Gcr.SecretExchange
-
-    /**
-     * Begin the secret exchange. The resulting string should be sent to the other
-     * side of the exchange. The other side should use [method`SecretExchange`.receive]
-     * to process the string.
-     * @returns A newly allocated string to be sent to the other     side of the secret exchange
-     */
-    begin(): string | null
-    /**
-     * Will return %NULL if no protocol was specified, and either
-     * [method`SecretExchange`.begin] or [method`SecretExchange`.receive] have not
-     * been called successfully.
-     * @returns the protocol or %NULL
-     */
-    get_protocol(): string | null
-    /**
-     * Returns the last secret received. If no secret has yet been received this
-     * will return %NULL. The string is owned by the #GcrSecretExchange object
-     * and will be valid until the next time that gcr_secret_exchange_receive()
-     * is called on this object, or the object is destroyed.
-     * 
-     * Depending on the secret passed into the other side of the secret exchange,
-     * the result may be a binary string. It does however have a null terminator,
-     * so if you're certain that it is does not contain arbitrary binary data,
-     * it can be used as a string.
-     * @returns the last secret received
-     */
-    get_secret(): string[]
-    /**
-     * Receive a string from the other side of secret exchange. This string will
-     * have been created by [method`SecretExchange`.begin] or
-     * [method`SecretExchange`.send].
-     * 
-     * After this call completes successfully the value returned from
-     * gcr_secret_exchange_get_secret() will have changed.
-     * @param exchange the string received
-     * @returns whether the string was successfully parsed and received
-     */
-    receive(exchange: string | null): boolean
-    /**
-     * Send a reply to the other side of the secret exchange, optionally sending a
-     * secret.
-     * 
-     * [method`SecretExchange`.receive] must have been successfully called at least
-     * once on this object. In other words this object must have received data
-     * from the other side of the secret exchange, before we can send a secret.
-     * @param secret optionally, a secret to send to the other side
-     * @param secret_len length of `secret,` or -1 if null terminated
-     * @returns a newly allocated string to be sent to the other     side of the secret exchange
-     */
-    send(secret: string | null, secret_len: number): string | null
-
-    // Own virtual methods of Gcr-4.Gcr.SecretExchange
-
-    vfunc_derive_transport_key(peer: number, n_peer: number): boolean
-    vfunc_generate_exchange_key(scheme: string | null, public_key: number, n_public_key: number): boolean
-
-    // Class property signals of Gcr-4.Gcr.SecretExchange
-
-    connect(sigName: "notify::protocol", callback: (($obj: SecretExchange, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::protocol", callback: (($obj: SecretExchange, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::protocol", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * Allows exchange of secrets between two processes on the same system without
- * exposing those secrets to things like loggers, non-pageable memory etc.
- * 
- * This does not protect against active attacks like MITM attacks.
- * 
- * Each side creates a secret exchange object, and one of the sides calls
- * [method`SecretExchange`.begin]. This creates a string, which should be passed
- * to the other side. Each side passes the strings it receives into
- * [method`SecretExchange`.receive].
- * 
- * In order to send a reply (either with or without a secret) use
- * [method`SecretExchange`.send]. A side must have successfully called
- * [method`SecretExchange`.receive] before it can use
- * [method`SecretExchange`.send].
- * 
- * The secret exchange objects can be used for multiple iterations of the
- * conversation, or for just one request/reply. The only limitation being that
- * the initial request cannot contain a secret.
- * 
- * Caveat: Information about the approximate length (rounded up to the nearest
- * 16 bytes) may be leaked. If this is considered inacceptable, do not use
- * [class`SecretExchange]`.
- * @class 
- */
-export class SecretExchange extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.SecretExchange
-
-    static name: string
-    static $gtype: GObject.GType<SecretExchange>
-
-    // Constructors of Gcr-4.Gcr.SecretExchange
-
-    constructor(config?: SecretExchange.ConstructorProperties) 
-    /**
-     * Create a new secret exchange object.
-     * 
-     * Specify a protocol of %NULL to allow any protocol. This is especially
-     * relevant on the side of the exchange that does not call
-     * [method`SecretExchange`.begin], that is the originator. Currently the only
-     * protocol supported is %GCR_SECRET_EXCHANGE_PROTOCOL_1.
-     * @constructor 
-     * @param protocol the exchange protocol to use
-     * @returns A new #GcrSecretExchange object
-     */
-    constructor(protocol: string | null) 
-    /**
-     * Create a new secret exchange object.
-     * 
-     * Specify a protocol of %NULL to allow any protocol. This is especially
-     * relevant on the side of the exchange that does not call
-     * [method`SecretExchange`.begin], that is the originator. Currently the only
-     * protocol supported is %GCR_SECRET_EXCHANGE_PROTOCOL_1.
-     * @constructor 
-     * @param protocol the exchange protocol to use
-     * @returns A new #GcrSecretExchange object
-     */
-    static new(protocol: string | null): SecretExchange
-    _init(config?: SecretExchange.ConstructorProperties): void
-}
-
-export module SimpleCertificate {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends Certificate.ConstructorProperties, GObject.Object.ConstructorProperties {
-    }
-
-}
-
-export interface SimpleCertificate extends Certificate {
-
-    // Own fields of Gcr-4.Gcr.SimpleCertificate
-
-    parent: GObject.Object
-
-    // Class property signals of Gcr-4.Gcr.SimpleCertificate
-
-    connect(sigName: "notify::description", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::description", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::description", ...args: any[]): void
-    connect(sigName: "notify::expiry-date", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::expiry-date", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::expiry-date", ...args: any[]): void
-    connect(sigName: "notify::issuer-name", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::issuer-name", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::issuer-name", ...args: any[]): void
-    connect(sigName: "notify::label", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::label", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::label", ...args: any[]): void
-    connect(sigName: "notify::subject-name", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::subject-name", callback: (($obj: SimpleCertificate, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::subject-name", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * An implementation of [iface`Certificate]` which loads a certificate from DER
- * data already located in memory.
- * 
- * To create an object, use the [ctor`SimpleCertificate`.new] or
- * [ctor`SimpleCertificate`.new_static] functions.
- * @class 
- */
-export class SimpleCertificate extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.SimpleCertificate
-
-    static name: string
-    static $gtype: GObject.GType<SimpleCertificate>
-
-    // Constructors of Gcr-4.Gcr.SimpleCertificate
-
-    constructor(config?: SimpleCertificate.ConstructorProperties) 
-    /**
-     * Create a new #GcrSimpleCertificate for the raw DER data. The `data` memory is
-     * copied so you can dispose of it after this function returns.
-     * @constructor 
-     * @param data the raw DER certificate data
-     * @returns a new #GcrSimpleCertificate
-     */
-    constructor(data: Uint8Array) 
-    /**
-     * Create a new #GcrSimpleCertificate for the raw DER data. The `data` memory is
-     * copied so you can dispose of it after this function returns.
-     * @constructor 
-     * @param data the raw DER certificate data
-     * @returns a new #GcrSimpleCertificate
-     */
-    static new(data: Uint8Array): SimpleCertificate
-    _init(config?: SimpleCertificate.ConstructorProperties): void
-}
-
-export module SshAskpass {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.SshAskpass
-
-        /**
-         * The interaction used to prompt for passwords.
-         */
-        interaction?: Gio.TlsInteraction | null
-    }
-
-}
-
-export interface SshAskpass {
-
-    // Own properties of Gcr-4.Gcr.SshAskpass
-
-    /**
-     * The interaction used to prompt for passwords.
-     */
-    readonly interaction: Gio.TlsInteraction
-
-    // Owm methods of Gcr-4.Gcr.SshAskpass
-
-    /**
-     * Get the interaction associated with this object.
-     * @returns the interaction
-     */
-    get_interaction(): Gio.TlsInteraction
-
-    // Class property signals of Gcr-4.Gcr.SshAskpass
-
-    connect(sigName: "notify::interaction", callback: (($obj: SshAskpass, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::interaction", callback: (($obj: SshAskpass, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::interaction", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * When used as the setup function while spawning an ssh command like ssh-add
- * or ssh, this allows callbacks for passwords on the provided interaction.
- * @class 
- */
-export class SshAskpass extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.SshAskpass
-
-    static name: string
-    static $gtype: GObject.GType<SshAskpass>
-
-    // Constructors of Gcr-4.Gcr.SshAskpass
-
-    constructor(config?: SshAskpass.ConstructorProperties) 
-    /**
-     * Create a new GcrSshAskpass object which can be used to spawn an
-     * ssh command and prompt for any necessary passwords.
-     * 
-     * Use the gcr_ssh_askpass_child_setup() function as a callback with
-     * g_spawn_sync(), g_spawn_async() or g_spawn_async_with_pipes().
-     * @constructor 
-     * @param interaction the interaction to use for prompting paswords
-     * @returns A new #GcrSshAskpass object
-     */
-    constructor(interaction: Gio.TlsInteraction) 
-    /**
-     * Create a new GcrSshAskpass object which can be used to spawn an
-     * ssh command and prompt for any necessary passwords.
-     * 
-     * Use the gcr_ssh_askpass_child_setup() function as a callback with
-     * g_spawn_sync(), g_spawn_async() or g_spawn_async_with_pipes().
-     * @constructor 
-     * @param interaction the interaction to use for prompting paswords
-     * @returns A new #GcrSshAskpass object
-     */
-    static new(interaction: Gio.TlsInteraction): SshAskpass
-    _init(config?: SshAskpass.ConstructorProperties): void
-    /**
-     * Use this function as a callback setup function passed to g_spawn_sync(),
-     * g_spawn_async(), g_spawn_async_with_pipes().
-     * @param askpass a #GcrSshAskpass object
-     */
-    static child_setup(askpass: any | null): void
-}
-
-export module SystemPrompt {
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends Prompt.ConstructorProperties, Gio.AsyncInitable.ConstructorProperties, Gio.Initable.ConstructorProperties, GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.SystemPrompt
-
-        /**
-         * The DBus bus name of the prompter to use for prompting, or %NULL
-         * for the default prompter.
-         */
-        bus_name?: string | null
-        /**
-         * The #GcrSecretExchange to use when transferring passwords. A default
-         * secret exchange will be used if this is not set.
-         */
-        secret_exchange?: SecretExchange | null
-        /**
-         * The timeout in seconds to wait when opening the prompt.
-         */
-        timeout_seconds?: number | null
-    }
-
-}
-
-export interface SystemPrompt extends Prompt, Gio.AsyncInitable, Gio.Initable {
-
-    // Own properties of Gcr-4.Gcr.SystemPrompt
-
-    /**
-     * The DBus bus name of the prompter to use for prompting, or %NULL
-     * for the default prompter.
-     */
-    readonly bus_name: string | null
-    /**
-     * The #GcrSecretExchange to use when transferring passwords. A default
-     * secret exchange will be used if this is not set.
-     */
-    secret_exchange: SecretExchange
-    /**
-     * The timeout in seconds to wait when opening the prompt.
-     */
-    readonly timeout_seconds: number
-
-    // Own fields of Gcr-4.Gcr.SystemPrompt
-
-    parent: GObject.Object
-
-    // Owm methods of Gcr-4.Gcr.SystemPrompt
-
-    /**
-     * Close this prompt. After calling this function, no further prompts will
-     * succeed on this object. The prompt object is not unreferenced by this
-     * function, and you must unreference it once done.
-     * 
-     * This call may block, use the gcr_system_prompt_close_async() to perform
-     * this action indefinitely.
-     * 
-     * Whether or not this function returns %TRUE, the system prompt object is
-     * still closed and may not be further used.
-     * @param cancellable an optional cancellation object
-     * @returns whether close was cleanly completed
-     */
-    close(cancellable: Gio.Cancellable | null): boolean
-
-    // Overloads of close
-
-    /**
-     * Closes the prompt so that in can no longer be used to prompt. The various
-     * prompt methods will return results as if the user dismissed the prompt.
-     * 
-     * The prompt may also be closed by the implementor of the prompt object.
-     * 
-     * This emits the [signal`Prompt:`:prompt-close] signal on the prompt object.
-     */
-    close(): void
-    /**
-     * Close this prompt asynchronously. After calling this function, no further
-     * methods may be called on this object. The prompt object is not unreferenced
-     * by this function, and you must unreference it once done.
-     * 
-     * This call returns immediately and completes asynchronously.
-     * @param cancellable an optional cancellation object
-     * @param callback called when the operation completes
-     */
-    close_async(cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<this> | null): void
-
-    // Overloads of close_async
-
-    /**
-     * Promisified version of {@link close_async}
-     * 
-     * Close this prompt asynchronously. After calling this function, no further
-     * methods may be called on this object. The prompt object is not unreferenced
-     * by this function, and you must unreference it once done.
-     * 
-     * This call returns immediately and completes asynchronously.
-     * @param cancellable an optional cancellation object
-     * @returns A Promise of: whether close was cleanly completed
-     */
-    close_async(cancellable: Gio.Cancellable | null): globalThis.Promise<boolean>
-    /**
-     * Complete operation to close this prompt.
-     * 
-     * Whether or not this function returns %TRUE, the system prompt object is
-     * still closed and may not be further used.
-     * @param result asynchronous operation result
-     * @returns whether close was cleanly completed
-     */
-    close_finish(result: Gio.AsyncResult): boolean
-    /**
-     * Get the current [class`SecretExchange]` used to transfer secrets in this prompt.
-     * @returns the secret exchange
-     */
-    get_secret_exchange(): SecretExchange
-
-    // Class property signals of Gcr-4.Gcr.SystemPrompt
-
-    connect(sigName: "notify::bus-name", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::bus-name", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::bus-name", ...args: any[]): void
-    connect(sigName: "notify::secret-exchange", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::secret-exchange", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::secret-exchange", ...args: any[]): void
-    connect(sigName: "notify::timeout-seconds", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::timeout-seconds", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::timeout-seconds", ...args: any[]): void
-    connect(sigName: "notify::caller-window", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::caller-window", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::caller-window", ...args: any[]): void
-    connect(sigName: "notify::cancel-label", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::cancel-label", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::cancel-label", ...args: any[]): void
-    connect(sigName: "notify::choice-chosen", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::choice-chosen", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::choice-chosen", ...args: any[]): void
-    connect(sigName: "notify::choice-label", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::choice-label", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::choice-label", ...args: any[]): void
-    connect(sigName: "notify::continue-label", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::continue-label", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::continue-label", ...args: any[]): void
-    connect(sigName: "notify::description", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::description", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::description", ...args: any[]): void
-    connect(sigName: "notify::message", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::message", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::message", ...args: any[]): void
-    connect(sigName: "notify::password-new", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::password-new", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::password-new", ...args: any[]): void
-    connect(sigName: "notify::password-strength", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::password-strength", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::password-strength", ...args: any[]): void
-    connect(sigName: "notify::title", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::title", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::title", ...args: any[]): void
-    connect(sigName: "notify::warning", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::warning", callback: (($obj: SystemPrompt, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::warning", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * A [iface`Prompt]` implementation which calls to the system prompter to
- * display prompts in a system modal fashion.
- * 
- * Since the system prompter usually only displays one prompt at a time, you
- * may have to wait for the prompt to be displayed. Use [func`SystemPrompt`.open]
- * or a related function to open a prompt. Since this can take a long time, you
- * should always check that the prompt is still needed after it is opened. A
- * previous prompt may have already provided the information needed and you
- * may no longer need to prompt.
- * 
- * Use [method`SystemPrompt`.close] to close the prompt when you're done with it.
- * @class 
- */
-export class SystemPrompt extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.SystemPrompt
-
-    static name: string
-    static $gtype: GObject.GType<SystemPrompt>
-
-    // Constructors of Gcr-4.Gcr.SystemPrompt
-
-    constructor(config?: SystemPrompt.ConstructorProperties) 
-    _init(config?: SystemPrompt.ConstructorProperties): void
-    static error_get_domain(): GLib.Quark
-    /**
-     * Opens a system prompt with the default prompter.
-     * 
-     * Most system prompters only allow showing one prompt at a time, and if
-     * another prompt is shown then this method will block for up to
-     * `timeout_seconds` seconds. If `timeout_seconds` is equal to -1, then this
-     * will block indefinitely until the prompt can be opened. If `timeout_seconds`
-     * expires, then this function will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS
-     * error.
-     * @param timeout_seconds the number of seconds to wait to access the prompt, or -1
-     * @param cancellable optional cancellation object
-     * @returns the prompt, or %NULL if          prompt could not be opened
-     */
-    static open(timeout_seconds: number, cancellable: Gio.Cancellable | null): SystemPrompt
-    /**
-     * Asynchronously open a system prompt with the default system prompter.
-     * 
-     * Most system prompters only allow showing one prompt at a time, and if
-     * another prompt is shown then this method will block for up to
-     * `timeout_seconds` seconds. If `timeout_seconds` is equal to -1, then this
-     * will block indefinitely until the prompt can be opened. If `timeout_seconds`
-     * expires, then this operation will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS
-     * error.
-     * @param timeout_seconds the number of seconds to wait to access the prompt, or -1
-     * @param cancellable optional cancellation object
-     * @param callback called when the operation completes
-     */
-    static open_async(timeout_seconds: number, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<SystemPrompt> | null): void
-    /**
-     * Complete an operation to asynchronously open a system prompt.
-     * @param result the asynchronous result
-     * @returns the prompt, or %NULL if          prompt could not be opened
-     */
-    static open_finish(result: Gio.AsyncResult): SystemPrompt
-    /**
-     * Opens a system prompt. If prompter_name is %NULL, then the default
-     * system prompter is used.
-     * 
-     * Most system prompters only allow showing one prompt at a time, and if
-     * another prompt is shown then this method will block for up to
-     * `timeout_seconds` seconds. If `timeout_seconds` is equal to -1, then this
-     * will block indefinitely until the prompt can be opened. If `timeout_seconds`
-     * expires, then this function will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS
-     * error.
-     * @param prompter_name the prompter dbus name
-     * @param timeout_seconds the number of seconds to wait to access the prompt, or -1
-     * @param cancellable optional cancellation object
-     * @returns the prompt, or %NULL if          prompt could not be opened
-     */
-    static open_for_prompter(prompter_name: string | null, timeout_seconds: number, cancellable: Gio.Cancellable | null): SystemPrompt
-    /**
-     * Opens a system prompt asynchronously. If prompter_name is %NULL, then the
-     * default system prompter is used.
-     * 
-     * Most system prompters only allow showing one prompt at a time, and if
-     * another prompt is shown then this method will block for up to
-     * `timeout_seconds` seconds. If `timeout_seconds` is equal to -1, then this
-     * will block indefinitely until the prompt can be opened. If `timeout_seconds`
-     * expires, then this operation will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS
-     * error.
-     * @param prompter_name the prompter D-Bus name
-     * @param timeout_seconds the number of seconds to wait to access the prompt, or -1
-     * @param cancellable optional cancellation object
-     * @param callback called when the operation completes
-     */
-    static open_for_prompter_async(prompter_name: string | null, timeout_seconds: number, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback<SystemPrompt> | null): void
-}
-
-export module SystemPrompter {
-
-    // Signal callback interfaces
-
-    /**
-     * Signal callback interface for `new-prompt`
-     */
-    export interface NewPromptSignalCallback {
-        ($obj: SystemPrompter): Prompt
-    }
-
-
-    // Constructor properties interface
-
-    export interface ConstructorProperties extends GObject.Object.ConstructorProperties {
-
-        // Own constructor properties of Gcr-4.Gcr.SystemPrompter
-
-        /**
-         * The #GType for prompts created by this prompter. This must be a
-         * #GcrPrompt implementation.
-         */
-        prompt_type?: GObject.GType | null
-    }
-
-}
-
-export interface SystemPrompter {
-
-    // Own properties of Gcr-4.Gcr.SystemPrompter
-
-    /**
-     * The #GType for prompts created by this prompter. This must be a
-     * #GcrPrompt implementation.
-     */
-    readonly prompt_type: GObject.GType
-    /**
-     * Whether the prompter is prompting or not.
-     */
-    readonly prompting: boolean
-
-    // Own fields of Gcr-4.Gcr.SystemPrompter
-
-    parent: GObject.Object
-
-    // Owm methods of Gcr-4.Gcr.SystemPrompter
-
-    /**
-     * Get the mode for this prompter.
-     * 
-     * Most system prompters only display one prompt at a time and therefore
-     * return %GCR_SYSTEM_PROMPTER_SINGLE.
-     * @returns the prompter mode
-     */
-    get_mode(): SystemPrompterMode
-    /**
-     * Get the #GType for prompts created by this prompter.
-     * 
-     * The returned #GType will be a #GcrPrompt implementation.
-     * @returns the prompt #GType
-     */
-    get_prompt_type(): GObject.GType
-    /**
-     * Get whether prompting or not.
-     * @returns whether prompting or not
-     */
-    get_prompting(): boolean
-    /**
-     * Register this system prompter on the DBus `connection`.
-     * 
-     * This makes the prompter available for clients to call. The prompter will
-     * remain registered until gcr_system_prompter_unregister() is called, or the
-     * prompter is unreferenced.
-     * @param connection a DBus connection
-     */
-    register(connection: Gio.DBusConnection): void
-    /**
-     * Unregister this system prompter on the DBus `connection`.
-     * 
-     * The prompter must have previously been registered with gcr_system_prompter_register().
-     * 
-     * If `wait` is set then this function will wait until all prompts have been closed
-     * or cancelled. This is usually only used by tests.
-     * @param wait whether to wait for closing prompts
-     */
-    unregister(wait: boolean): void
-
-    // Own signals of Gcr-4.Gcr.SystemPrompter
-
-    connect(sigName: "new-prompt", callback: SystemPrompter.NewPromptSignalCallback): number
-    connect_after(sigName: "new-prompt", callback: SystemPrompter.NewPromptSignalCallback): number
-    emit(sigName: "new-prompt", ...args: any[]): void
-
-    // Class property signals of Gcr-4.Gcr.SystemPrompter
-
-    connect(sigName: "notify::prompt-type", callback: (($obj: SystemPrompter, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::prompt-type", callback: (($obj: SystemPrompter, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::prompt-type", ...args: any[]): void
-    connect(sigName: "notify::prompting", callback: (($obj: SystemPrompter, pspec: GObject.ParamSpec) => void)): number
-    connect_after(sigName: "notify::prompting", callback: (($obj: SystemPrompter, pspec: GObject.ParamSpec) => void)): number
-    emit(sigName: "notify::prompting", ...args: any[]): void
-    connect(sigName: string, callback: (...args: any[]) => void): number
-    connect_after(sigName: string, callback: (...args: any[]) => void): number
-    emit(sigName: string, ...args: any[]): void
-    disconnect(id: number): void
-}
-
-/**
- * A prompter used by implementations of system prompts.
- * 
- * This is a D-Bus service which is rarely implemented. Use [class`SystemPrompt]`
- * to display system prompts.
- * 
- * The system prompter service responds to D-Bus requests to create system
- * prompts and creates #GcrPrompt type objects to display those prompts.
- * 
- * Pass the GType of the implementation of [iface`Prompt]` to
- * [ctor`SystemPrompter`.new].
- * @class 
- */
-export class SystemPrompter extends GObject.Object {
-
-    // Own properties of Gcr-4.Gcr.SystemPrompter
-
-    static name: string
-    static $gtype: GObject.GType<SystemPrompter>
-
-    // Constructors of Gcr-4.Gcr.SystemPrompter
-
-    constructor(config?: SystemPrompter.ConstructorProperties) 
-    /**
-     * Create a new system prompter service. This prompter won't do anything unless
-     * you connect to its signals and show appropriate prompts.
-     * 
-     * If `prompt_type` is zero, then the new-prompt signal must be handled and
-     * return a valid prompt object implementing the #GcrPrompt interface.
-     * 
-     * If `prompt_type` is non-zero then the #GType must implement the #GcrPrompt
-     * interface.
-     * @constructor 
-     * @param mode the mode for the prompt
-     * @param prompt_type the gobject type for prompts created by this prompter
-     * @returns a new prompter service
-     */
-    constructor(mode: SystemPrompterMode, prompt_type: GObject.GType) 
-    /**
-     * Create a new system prompter service. This prompter won't do anything unless
-     * you connect to its signals and show appropriate prompts.
-     * 
-     * If `prompt_type` is zero, then the new-prompt signal must be handled and
-     * return a valid prompt object implementing the #GcrPrompt interface.
-     * 
-     * If `prompt_type` is non-zero then the #GType must implement the #GcrPrompt
-     * interface.
-     * @constructor 
-     * @param mode the mode for the prompt
-     * @param prompt_type the gobject type for prompts created by this prompter
-     * @returns a new prompter service
-     */
-    static new(mode: SystemPrompterMode, prompt_type: GObject.GType): SystemPrompter
-    _init(config?: SystemPrompter.ConstructorProperties): void
-}
-
-export interface CertificateChainClass {
-
-    // Own fields of Gcr-4.Gcr.CertificateChainClass
-
-    /**
-     * The parent class
-     * @field 
-     */
-    parent_class: GObject.ObjectClass
-}
-
-/**
- * The class for #GcrCertificateChain.
- * @record 
- */
-export abstract class CertificateChainClass {
-
-    // Own properties of Gcr-4.Gcr.CertificateChainClass
-
-    static name: string
-}
-
-export interface CertificateChainPrivate {
-}
-
-export class CertificateChainPrivate {
-
-    // Own properties of Gcr-4.Gcr.CertificateChainPrivate
-
-    static name: string
-}
-
-export interface CertificateFieldClass {
-
-    // Own fields of Gcr-4.Gcr.CertificateFieldClass
-
-    parent_class: GObject.ObjectClass
-}
-
-export abstract class CertificateFieldClass {
-
-    // Own properties of Gcr-4.Gcr.CertificateFieldClass
-
-    static name: string
-}
-
-export interface CertificateIface {
-
-    // Own fields of Gcr-4.Gcr.CertificateIface
-
-    /**
-     * the parent interface type
-     * @field 
-     */
-    parent: GObject.TypeInterface
-    get_der_data: (self: Certificate) => Uint8Array
-}
-
-/**
- * The interface that implementors of #GcrCertificate must implement.
- * @record 
- */
-export abstract class CertificateIface {
-
-    // Own properties of Gcr-4.Gcr.CertificateIface
-
-    static name: string
-}
-
-export interface CertificateRequestClass {
-
-    // Own fields of Gcr-4.Gcr.CertificateRequestClass
-
-    parent_class: GObject.ObjectClass
-}
-
-export abstract class CertificateRequestClass {
-
-    // Own properties of Gcr-4.Gcr.CertificateRequestClass
-
-    static name: string
-}
-
-export interface CertificateSectionClass {
-
-    // Own fields of Gcr-4.Gcr.CertificateSectionClass
-
-    parent_class: GObject.ObjectClass
-}
-
-export abstract class CertificateSectionClass {
-
-    // Own properties of Gcr-4.Gcr.CertificateSectionClass
-
-    static name: string
-}
-
-export interface ImportInteractionInterface {
-
-    // Own fields of Gcr-4.Gcr.ImportInteractionInterface
-
-    /**
-     * parent interface
-     * @field 
-     */
-    parent: GObject.TypeInterface
-    supplement_prep: (interaction: ImportInteraction, builder: Gck.Builder) => void
-    supplement: (interaction: ImportInteraction, builder: Gck.Builder, cancellable: Gio.Cancellable | null) => Gio.TlsInteractionResult
-    supplement_async: (interaction: ImportInteraction, builder: Gck.Builder, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback | null) => void
-    supplement_finish: (interaction: ImportInteraction, result: Gio.AsyncResult) => Gio.TlsInteractionResult
-}
-
-/**
- * Interface implemented by implementations of [iface`ImportInteraction]`.
- * @record 
- */
-export abstract class ImportInteractionInterface {
-
-    // Own properties of Gcr-4.Gcr.ImportInteractionInterface
-
-    static name: string
-}
-
-export interface ImporterInterface {
-
-    // Own fields of Gcr-4.Gcr.ImporterInterface
-
-    /**
-     * parent interface
-     * @field 
-     */
-    parent: GObject.TypeInterface
-    queue_for_parsed: (importer: Importer, parsed: Parsed) => boolean
-    import_async: (importer: Importer, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback | null) => void
-    import_finish: (importer: Importer, result: Gio.AsyncResult) => boolean
-}
-
-/**
- * Interface implemented for a #GcrImporter.
- * @record 
- */
-export abstract class ImporterInterface {
-
-    // Own properties of Gcr-4.Gcr.ImporterInterface
-
-    static name: string
-}
-
-export interface Parsed {
-
-    // Owm methods of Gcr-4.Gcr.Parsed
-
-    /**
-     * Get the attributes which make up the parsed item.
-     * @returns the attributes for the item; these          are owned by the parsed item and should not be freed
-     */
-    get_attributes(): Gck.Attributes | null
-    /**
-     * Get the raw data block for the parsed item.
-     * @returns the raw data of the parsed item, or %NULL
-     */
-    get_bytes(): GLib.Bytes
-    /**
-     * Get the raw data block for the parsed item.
-     * @returns the raw data of          the parsed item, or %NULL
-     */
-    get_data(): Uint8Array | null
-    /**
-     * Get the descirption for a parsed item.
-     * @returns the description
-     */
-    get_description(): string | null
-    /**
-     * Get the filename of the parsed item.
-     * @returns the filename of          the parsed item, or %NULL
-     */
-    get_filename(): string | null
-    /**
-     * Get the format of the parsed item.
-     * @returns the data format of the item
-     */
-    get_format(): DataFormat
-    /**
-     * Get the label for the parsed item.
-     * @returns the label for the item
-     */
-    get_label(): string | null
-    /**
-     * Add a reference to a parsed item. An item may not be shared across threads
-     * until it has been referenced at least once.
-     * @returns the parsed item
-     */
-    ref(): Parsed
-}
-
-/**
- * A parsed item parsed by a #GcrParser.
- * @record 
- */
-export class Parsed {
-
-    // Own properties of Gcr-4.Gcr.Parsed
-
-    static name: string
-
-    // Constructors of Gcr-4.Gcr.Parsed
-
-    /**
-     * Unreferences a parsed item which was referenced with gcr_parsed_ref()
-     * @param parsed a parsed item
-     */
-    static unref(parsed: any | null): void
-}
-
-export interface ParserClass {
-
-    // Own fields of Gcr-4.Gcr.ParserClass
-
-    /**
-     * The parent class
-     * @field 
-     */
-    parent_class: GObject.ObjectClass
-    authenticate: (self: Parser, count: number) => boolean
-    parsed: (self: Parser) => void
-}
-
-/**
- * The class for #GcrParser
- * @record 
- */
-export abstract class ParserClass {
-
-    // Own properties of Gcr-4.Gcr.ParserClass
-
-    static name: string
-}
-
-export interface ParserPrivate {
-}
-
-export class ParserPrivate {
-
-    // Own properties of Gcr-4.Gcr.ParserPrivate
-
-    static name: string
-}
-
-export interface Pkcs11CertificateClass {
-}
-
-export abstract class Pkcs11CertificateClass {
-
-    // Own properties of Gcr-4.Gcr.Pkcs11CertificateClass
-
-    static name: string
-}
-
-export interface Pkcs11CertificatePrivate {
-}
-
-export class Pkcs11CertificatePrivate {
-
-    // Own properties of Gcr-4.Gcr.Pkcs11CertificatePrivate
-
-    static name: string
-}
-
-export interface PromptInterface {
-
-    // Own fields of Gcr-4.Gcr.PromptInterface
-
-    /**
-     * parent interface
-     * @field 
-     */
-    parent_iface: GObject.TypeInterface
-    prompt_password_async: (prompt: Prompt, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback | null) => void
-    prompt_password_finish: (prompt: Prompt, result: Gio.AsyncResult) => string | null
-    prompt_confirm_async: (prompt: Prompt, cancellable: Gio.Cancellable | null, callback: Gio.AsyncReadyCallback | null) => void
-    prompt_confirm_finish: (prompt: Prompt, result: Gio.AsyncResult) => PromptReply
-    prompt_close: (prompt: Prompt) => void
-}
-
-/**
- * The interface for implementing [iface`Prompt]`.
- * @record 
- */
-export abstract class PromptInterface {
-
-    // Own properties of Gcr-4.Gcr.PromptInterface
-
-    static name: string
-}
-
-export interface SecretExchangeClass {
-
-    // Own fields of Gcr-4.Gcr.SecretExchangeClass
-
-    generate_exchange_key: (exchange: SecretExchange, scheme: string | null, public_key: number, n_public_key: number) => boolean
-    derive_transport_key: (exchange: SecretExchange, peer: number, n_peer: number) => boolean
-}
-
-export abstract class SecretExchangeClass {
-
-    // Own properties of Gcr-4.Gcr.SecretExchangeClass
-
-    static name: string
-}
-
-export interface SecretExchangePrivate {
-}
-
-export class SecretExchangePrivate {
-
-    // Own properties of Gcr-4.Gcr.SecretExchangePrivate
-
-    static name: string
-}
-
-export interface SimpleCertificateClass {
-
-    // Own fields of Gcr-4.Gcr.SimpleCertificateClass
-
-    parent_class: GObject.ObjectClass
-}
-
-export abstract class SimpleCertificateClass {
-
-    // Own properties of Gcr-4.Gcr.SimpleCertificateClass
-
-    static name: string
-}
-
-export interface SimpleCertificatePrivate {
-}
-
-export class SimpleCertificatePrivate {
-
-    // Own properties of Gcr-4.Gcr.SimpleCertificatePrivate
-
-    static name: string
-}
-
-export interface SshAskpassClass {
-
-    // Own fields of Gcr-4.Gcr.SshAskpassClass
-
-    parent_class: GObject.ObjectClass
-}
-
-export abstract class SshAskpassClass {
-
-    // Own properties of Gcr-4.Gcr.SshAskpassClass
-
-    static name: string
-}
-
-export interface SystemPromptClass {
-
-    // Own fields of Gcr-4.Gcr.SystemPromptClass
-
-    parent_class: GObject.ObjectClass
-}
-
-export abstract class SystemPromptClass {
-
-    // Own properties of Gcr-4.Gcr.SystemPromptClass
-
-    static name: string
-}
-
-export interface SystemPromptPrivate {
-}
-
-export class SystemPromptPrivate {
-
-    // Own properties of Gcr-4.Gcr.SystemPromptPrivate
-
-    static name: string
-}
-
-export interface SystemPrompterClass {
-
-    // Own fields of Gcr-4.Gcr.SystemPrompterClass
-
-    /**
-     * parent class
-     * @field 
-     */
-    parent_class: GObject.ObjectClass
-}
-
-/**
- * The class for #GcrSystemPrompter.
- * @record 
- */
-export abstract class SystemPrompterClass {
-
-    // Own properties of Gcr-4.Gcr.SystemPrompterClass
-
-    static name: string
-}
-
-export interface SystemPrompterPrivate {
-}
-
-export class SystemPrompterPrivate {
-
-    // Own properties of Gcr-4.Gcr.SystemPrompterPrivate
-
-    static name: string
-}
-
-/**
- * Name of the imported GIR library
- * @see https://gitlab.gnome.org/GNOME/gjs/-/blob/master/gi/ns.cpp#L188
- */
-export const __name__: string
-/**
- * Version of the imported GIR library
- * @see https://gitlab.gnome.org/GNOME/gjs/-/blob/master/gi/ns.cpp#L189
- */
-export const __version__: string
-// END