@gguf/pigbot 0.0.6 → 0.0.7

package/docs/gateway/authentication.md

@@ -6,7 +6,7 @@ read_when:
 ---
 # Authentication
 
-Moltbot supports OAuth and API keys for model providers. For Anthropic
+OpenClaw supports OAuth and API keys for model providers. For Anthropic
 accounts, we recommend using an **API key**. For Claude subscription access,
 use the long‑lived token created by `claude setup-token`.
 
@@ -18,18 +18,18 @@ layout.
 If you’re using Anthropic directly, use an API key.
 
 1) Create an API key in the Anthropic Console.
-2) Put it on the **gateway host** (the machine running `moltbot gateway`).
+2) Put it on the **gateway host** (the machine running `openclaw gateway`).
 
 ```bash
 export ANTHROPIC_API_KEY="..."
-moltbot models status
+openclaw models status
 ```
 
 3) If the Gateway runs under systemd/launchd, prefer putting the key in
-`~/.clawdbot/.env` so the daemon can read it:
+`~/.openclaw/.env` so the daemon can read it:
 
 ```bash
-cat >> ~/.clawdbot/.env <<'EOF'
+cat >> ~/.openclaw/.env <<'EOF'
 ANTHROPIC_API_KEY=...
 EOF
 ```
@@ -37,15 +37,15 @@ EOF
 Then restart the daemon (or restart your Gateway process) and re-check:
 
 ```bash
-moltbot models status
-moltbot doctor
+openclaw models status
+openclaw doctor
 ```
 
 If you’d rather not manage env vars yourself, the onboarding wizard can store
-API keys for daemon use: `moltbot onboard`.
+API keys for daemon use: `openclaw onboard`.
 
 See [Help](/help) for details on env inheritance (`env.shellEnv`,
-`~/.clawdbot/.env`, systemd/launchd).
+`~/.openclaw/.env`, systemd/launchd).
 
 ## Anthropic: setup-token (subscription auth)
 
@@ -56,16 +56,16 @@ subscription, the setup-token flow is also supported. Run it on the **gateway ho
 claude setup-token
 ```
 
-Then paste it into Moltbot:
+Then paste it into OpenClaw:
 
 ```bash
-moltbot models auth setup-token --provider anthropic
+openclaw models auth setup-token --provider anthropic
 ```
 
 If the token was created on another machine, paste it manually:
 
 ```bash
-moltbot models auth paste-token --provider anthropic
+openclaw models auth paste-token --provider anthropic
 ```
 
 If you see an Anthropic error like:
@@ -79,14 +79,14 @@ This credential is only authorized for use with Claude Code and cannot be used f
 Manual token entry (any provider; writes `auth-profiles.json` + updates config):
 
 ```bash
-moltbot models auth paste-token --provider anthropic
-moltbot models auth paste-token --provider openrouter
+openclaw models auth paste-token --provider anthropic
+openclaw models auth paste-token --provider openrouter
 ```
 
 Automation-friendly check (exit `1` when expired/missing, `2` when expiring):
 
 ```bash
-moltbot models status --check
+openclaw models status --check
 ```
 
 Optional ops scripts (systemd/Termux) are documented here:
@@ -97,8 +97,8 @@ Optional ops scripts (systemd/Termux) are documented here:
 ## Checking model auth status
 
 ```bash
-moltbot models status
-moltbot doctor
+openclaw models status
+openclaw doctor
 ```
 
 ## Controlling which credential is used
@@ -114,9 +114,9 @@ Use `/model` (or `/model list`) for a compact picker; use `/model status` for th
 Set an explicit auth profile order override for an agent (stored in that agent’s `auth-profiles.json`):
 
 ```bash
-moltbot models auth order get --provider anthropic
-moltbot models auth order set --provider anthropic anthropic:default
-moltbot models auth order clear --provider anthropic
+openclaw models auth order get --provider anthropic
+openclaw models auth order set --provider anthropic anthropic:default
+openclaw models auth order clear --provider anthropic
 ```
 
 Use `--agent <id>` to target a specific agent; omit it to use the configured default agent.
@@ -129,12 +129,12 @@ If the Anthropic token profile is missing, run `claude setup-token` on the
 **gateway host**, then re-check:
 
 ```bash
-moltbot models status
+openclaw models status
 ```
 
 ### Token expiring/expired
 
-Run `moltbot models status` to confirm which profile is expiring. If the profile
+Run `openclaw models status` to confirm which profile is expiring. If the profile
 is missing, rerun `claude setup-token` and paste the token again.
 
 ## Requirements

package/docs/gateway/background-process.md

@@ -7,7 +7,7 @@ read_when:
 
 # Background Exec + Process Tool
 
-Moltbot runs shell commands through the `exec` tool and keeps long‑running tasks in memory. The `process` tool manages those background sessions.
+OpenClaw runs shell commands through the `exec` tool and keeps long‑running tasks in memory. The `process` tool manages those background sessions.
 
 ## exec tool
 
@@ -33,7 +33,7 @@ When spawning long-running child processes outside the exec/process tools (for e
 Environment overrides:
 - `PI_BASH_YIELD_MS`: default yield (ms)
 - `PI_BASH_MAX_OUTPUT_CHARS`: in‑memory output cap (chars)
-- `CLAWDBOT_BASH_PENDING_MAX_OUTPUT_CHARS`: pending stdout/stderr cap per stream (chars)
+- `OPENCLAW_BASH_PENDING_MAX_OUTPUT_CHARS`: pending stdout/stderr cap per stream (chars)
 - `PI_BASH_JOB_TTL_MS`: TTL for finished sessions (ms, bounded to 1m–3h)
 
 Config (preferred):

package/docs/gateway/bonjour.md

@@ -6,7 +6,7 @@ read_when:
 ---
 # Bonjour / mDNS discovery
 
-Moltbot uses Bonjour (mDNS / DNS‑SD) as a **LAN‑only convenience** to discover
+OpenClaw uses Bonjour (mDNS / DNS‑SD) as a **LAN‑only convenience** to discover
 an active Gateway (WebSocket endpoint). It is best‑effort and does **not** replace SSH or
 Tailnet-based connectivity.
 
@@ -19,38 +19,38 @@ boundary. You can keep the same discovery UX by switching to **unicast DNS‑SD*
 High‑level steps:
 
 1) Run a DNS server on the gateway host (reachable over Tailnet).
-2) Publish DNS‑SD records for `_moltbot-gw._tcp` under a dedicated zone
-   (example: `moltbot.internal.`).
-3) Configure Tailscale **split DNS** so `moltbot.internal` resolves via that
+2) Publish DNS‑SD records for `_openclaw-gw._tcp` under a dedicated zone
+   (example: `openclaw.internal.`).
+3) Configure Tailscale **split DNS** so your chosen domain resolves via that
    DNS server for clients (including iOS).
 
-Moltbot standardizes on `moltbot.internal.` for this mode. iOS/Android nodes
-browse both `local.` and `moltbot.internal.` automatically.
+OpenClaw supports any discovery domain; `openclaw.internal.` is just an example.
+iOS/Android nodes browse both `local.` and your configured wide‑area domain.
 
 ### Gateway config (recommended)
 
 ```json5
 {
   gateway: { bind: "tailnet" }, // tailnet-only (recommended)
-  discovery: { wideArea: { enabled: true } } // enables moltbot.internal DNS-SD publishing
+  discovery: { wideArea: { enabled: true } } // enables wide-area DNS-SD publishing
 }
 ```
 
 ### One‑time DNS server setup (gateway host)
 
 ```bash
-moltbot dns setup --apply
+openclaw dns setup --apply
 ```
 
 This installs CoreDNS and configures it to:
 - listen on port 53 only on the gateway’s Tailscale interfaces
-- serve `moltbot.internal.` from `~/.clawdbot/dns/moltbot.internal.db`
+- serve your chosen domain (example: `openclaw.internal.`) from `~/.openclaw/dns/<domain>.db`
 
 Validate from a tailnet‑connected machine:
 
 ```bash
-dns-sd -B _moltbot-gw._tcp moltbot.internal.
-dig @<TAILNET_IPV4> -p 53 _moltbot-gw._tcp.clawdbot.internal PTR +short
+dns-sd -B _openclaw-gw._tcp openclaw.internal.
+dig @<TAILNET_IPV4> -p 53 _openclaw-gw._tcp.openclaw.internal PTR +short
 ```
 
 ### Tailscale DNS settings
@@ -58,10 +58,10 @@ dig @<TAILNET_IPV4> -p 53 _moltbot-gw._tcp.clawdbot.internal PTR +short
 In the Tailscale admin console:
 
 - Add a nameserver pointing at the gateway’s tailnet IP (UDP/TCP 53).
-- Add split DNS so the domain `moltbot.internal` uses that nameserver.
+- Add split DNS so your discovery domain uses that nameserver.
 
 Once clients accept tailnet DNS, iOS nodes can browse
-`_moltbot-gw._tcp` in `moltbot.internal.` without multicast.
+`_openclaw-gw._tcp` in your discovery domain without multicast.
 
 ### Gateway listener security (recommended)
 
@@ -69,16 +69,16 @@ The Gateway WS port (default `18789`) binds to loopback by default. For LAN/tail
 access, bind explicitly and keep auth enabled.
 
 For tailnet‑only setups:
-- Set `gateway.bind: "tailnet"` in `~/.clawdbot/moltbot.json`.
+- Set `gateway.bind: "tailnet"` in `~/.openclaw/openclaw.json`.
 - Restart the Gateway (or restart the macOS menubar app).
 
 ## What advertises
 
-Only the Gateway advertises `_moltbot-gw._tcp`.
+Only the Gateway advertises `_openclaw-gw._tcp`.
 
 ## Service types
 
-- `_moltbot-gw._tcp` — gateway transport beacon (used by macOS/iOS/Android nodes).
+- `_openclaw-gw._tcp` — gateway transport beacon (used by macOS/iOS/Android nodes).
 
 ## TXT keys (non‑secret hints)
 
@@ -93,7 +93,7 @@ The Gateway advertises small non‑secret hints to make UI flows convenient:
 - `canvasPort=<port>` (only when the canvas host is enabled; default `18793`)
 - `sshPort=<port>` (defaults to 22 when not overridden)
 - `transport=gateway`
-- `cliPath=<path>` (optional; absolute path to a runnable `moltbot` entrypoint)
+- `cliPath=<path>` (optional; absolute path to a runnable `openclaw` entrypoint)
 - `tailnetDns=<magicdns>` (optional hint when Tailnet is available)
 
 ## Debugging on macOS
@@ -102,11 +102,11 @@ Useful built‑in tools:
 
 - Browse instances:
   ```bash
-  dns-sd -B _moltbot-gw._tcp local.
+  dns-sd -B _openclaw-gw._tcp local.
   ```
 - Resolve one instance (replace `<instance>`):
   ```bash
-  dns-sd -L "<instance>" _moltbot-gw._tcp local.
+  dns-sd -L "<instance>" _openclaw-gw._tcp local.
   ```
 
 If browsing works but resolving fails, you’re usually hitting a LAN policy or
@@ -123,7 +123,7 @@ The Gateway writes a rolling log file (printed on startup as
 
 ## Debugging on iOS node
 
-The iOS node uses `NWBrowser` to discover `_moltbot-gw._tcp`.
+The iOS node uses `NWBrowser` to discover `_openclaw-gw._tcp`.
 
 To capture logs:
 - Settings → Gateway → Advanced → **Discovery Debug Logs**
@@ -150,11 +150,11 @@ sequences (e.g. spaces become `\032`).
 
 ## Disabling / configuration
 
-- `CLAWDBOT_DISABLE_BONJOUR=1` disables advertising.
-- `gateway.bind` in `~/.clawdbot/moltbot.json` controls the Gateway bind mode.
-- `CLAWDBOT_SSH_PORT` overrides the SSH port advertised in TXT.
-- `CLAWDBOT_TAILNET_DNS` publishes a MagicDNS hint in TXT.
-- `CLAWDBOT_CLI_PATH` overrides the advertised CLI path.
+- `OPENCLAW_DISABLE_BONJOUR=1` disables advertising (legacy: `OPENCLAW_DISABLE_BONJOUR`).
+- `gateway.bind` in `~/.openclaw/openclaw.json` controls the Gateway bind mode.
+- `OPENCLAW_SSH_PORT` overrides the SSH port advertised in TXT (legacy: `OPENCLAW_SSH_PORT`).
+- `OPENCLAW_TAILNET_DNS` publishes a MagicDNS hint in TXT (legacy: `OPENCLAW_TAILNET_DNS`).
+- `OPENCLAW_CLI_PATH` overrides the advertised CLI path (legacy: `OPENCLAW_CLI_PATH`).
 
 ## Related docs
 

package/docs/gateway/bridge-protocol.md

@@ -14,7 +14,7 @@ should use the unified Gateway WebSocket protocol instead.
 If you are building an operator or node client, use the
 [Gateway protocol](/gateway/protocol).
 
-**Note:** Current Moltbot builds no longer ship the TCP bridge listener; this document is kept for historical reference.
+**Note:** Current OpenClaw builds no longer ship the TCP bridge listener; this document is kept for historical reference.
 Legacy `bridge.*` config keys are no longer part of the config schema.
 
 ## Why we have both
@@ -74,7 +74,7 @@ Payload fields (all optional unless noted):
 ## Tailnet usage
 
 - Bind the bridge to a tailnet IP: `bridge.bind: "tailnet"` in
-  `~/.clawdbot/moltbot.json`.
+  `~/.openclaw/openclaw.json`.
 - Clients connect via MagicDNS name or tailnet IP.
 - Bonjour does **not** cross networks; use manual host/port or wide-area DNS‑SD
   when needed.

package/docs/gateway/cli-backends.md

@@ -7,7 +7,7 @@ read_when:
 ---
 # CLI backends (fallback runtime)
 
-Moltbot can run **local AI CLIs** as a **text-only fallback** when API providers are down,
+OpenClaw can run **local AI CLIs** as a **text-only fallback** when API providers are down,
 rate-limited, or temporarily misbehaving. This is intentionally conservative:
 
 - **Tools are disabled** (no tool calls).
@@ -20,16 +20,16 @@ want “always works” text responses without relying on external APIs.
 
 ## Beginner-friendly quick start
 
-You can use Claude Code CLI **without any config** (Moltbot ships a built-in default):
+You can use Claude Code CLI **without any config** (OpenClaw ships a built-in default):
 
 ```bash
-moltbot agent --message "hi" --model claude-cli/opus-4.5
+openclaw agent --message "hi" --model claude-cli/opus-4.5
 ```
 
 Codex CLI also works out of the box:
 
 ```bash
-moltbot agent --message "hi" --model codex-cli/gpt-5.2-codex
+openclaw agent --message "hi" --model codex-cli/gpt-5.2-codex
 ```
 
 If your gateway runs under launchd/systemd and PATH is minimal, add just the
@@ -76,7 +76,7 @@ Add a CLI backend to your fallback list so it only runs when primary models fail
 
 Notes:
 - If you use `agents.defaults.models` (allowlist), you must include `claude-cli/...`.
-- If the primary provider fails (auth, rate limits, timeouts), Moltbot will
+- If the primary provider fails (auth, rate limits, timeouts), OpenClaw will
   try the CLI backend next.
 
 ## Configuration overview
@@ -132,7 +132,7 @@ The provider id becomes the left side of your model ref:
 ## How it works
 
 1) **Selects a backend** based on the provider prefix (`claude-cli/...`).
-2) **Builds a system prompt** using the same Moltbot prompt + workspace context.
+2) **Builds a system prompt** using the same OpenClaw prompt + workspace context.
 3) **Executes the CLI** with a session id (if supported) so history stays consistent.
 4) **Parses output** (JSON or plain text) and returns the final text.
 5) **Persists session ids** per backend, so follow-ups reuse the same CLI session.
@@ -159,8 +159,8 @@ imageArg: "--image",
 imageMode: "repeat"
 ```
 
-Moltbot will write base64 images to temp files. If `imageArg` is set, those
-paths are passed as CLI args. If `imageArg` is missing, Moltbot appends the
+OpenClaw will write base64 images to temp files. If `imageArg` is set, those
+paths are passed as CLI args. If `imageArg` is missing, OpenClaw appends the
 file paths to the prompt (path injection), which is enough for CLIs that auto-
 load local files from plain paths (Claude Code CLI behavior).
 
@@ -178,7 +178,7 @@ Input modes:
 
 ## Defaults (built-in)
 
-Moltbot ships a default for `claude-cli`:
+OpenClaw ships a default for `claude-cli`:
 
 - `command: "claude"`
 - `args: ["-p", "--output-format", "json", "--dangerously-skip-permissions"]`
@@ -189,7 +189,7 @@ Moltbot ships a default for `claude-cli`:
 - `systemPromptWhen: "first"`
 - `sessionMode: "always"`
 
-Moltbot also ships a default for `codex-cli`:
+OpenClaw also ships a default for `codex-cli`:
 
 - `command: "codex"`
 - `args: ["exec","--json","--color","never","--sandbox","read-only","--skip-git-repo-check"]`
@@ -204,12 +204,12 @@ Override only if needed (common: absolute `command` path).
 
 ## Limitations
 
-- **No Moltbot tools** (the CLI backend never receives tool calls). Some CLIs
+- **No OpenClaw tools** (the CLI backend never receives tool calls). Some CLIs
   may still run their own agent tooling.
 - **No streaming** (CLI output is collected then returned).
 - **Structured outputs** depend on the CLI’s JSON format.
 - **Codex CLI sessions** resume via text output (no JSONL), which is less
-  structured than the initial `--json` run. Moltbot sessions still work
+  structured than the initial `--json` run. OpenClaw sessions still work
   normally.
 
 ## Troubleshooting

package/docs/gateway/configuration-examples.md

@@ -1,9 +1,9 @@
 ---
-summary: "Schema-accurate configuration examples for common Moltbot setups"
+summary: "Schema-accurate configuration examples for common OpenClaw setups"
 read_when:
-  - Learning how to configure Moltbot
+  - Learning how to configure OpenClaw
   - Looking for configuration examples
-  - Setting up Moltbot for the first time
+  - Setting up OpenClaw for the first time
 ---
 # Configuration Examples
 
@@ -14,12 +14,12 @@ Examples below are aligned with the current config schema. For the exhaustive re
 ### Absolute minimum
 ```json5
 {
-  agent: { workspace: "~/clawd" },
+  agent: { workspace: "~/.openclaw/workspace" },
   channels: { whatsapp: { allowFrom: ["+15555550123"] } }
 }
 ```
 
-Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
+Save to `~/.openclaw/openclaw.json` and you can DM the bot from that number.
 
 ### Recommended starter
 ```json5
@@ -30,7 +30,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
     emoji: "🦞"
   },
   agent: {
-    workspace: "~/clawd",
+    workspace: "~/.openclaw/workspace",
     model: { primary: "anthropic/claude-sonnet-4-5" }
   },
   channels: {
@@ -85,7 +85,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
   // Logging
   logging: {
     level: "info",
-    file: "/tmp/moltbot/moltbot.log",
+    file: "/tmp/openclaw/openclaw.log",
     consoleLevel: "info",
     consoleStyle: "pretty",
     redactSensitive: "tools"
@@ -93,7 +93,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
 
   // Message formatting
   messages: {
-    messagePrefix: "[moltbot]",
+    messagePrefix: "[openclaw]",
     responsePrefix: ">",
     ackReaction: "👀",
     ackReactionScope: "group-mentions"
@@ -102,7 +102,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
   // Routing + queue
   routing: {
     groupChat: {
-      mentionPatterns: ["@clawd", "moltbot"],
+      mentionPatterns: ["@openclaw", "openclaw"],
       historyLimit: 50
     },
     queue: {
@@ -155,7 +155,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
       discord: { mode: "idle", idleMinutes: 10080 }
     },
     resetTriggers: ["/new", "/reset"],
-    store: "~/.clawdbot/agents/default/sessions/sessions.json",
+    store: "~/.openclaw/agents/default/sessions/sessions.json",
     typingIntervalSeconds: 5,
     sendPolicy: {
       default: "allow",
@@ -190,7 +190,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
       dm: { enabled: true, allowFrom: ["steipete"] },
       guilds: {
         "123456789012345678": {
-          slug: "friends-of-clawd",
+          slug: "friends-of-openclaw",
           requireMention: false,
           channels: {
             general: { allow: true },
@@ -210,7 +210,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
       dm: { enabled: true, allowFrom: ["U123"] },
       slashCommand: {
         enabled: true,
-        name: "clawd",
+        name: "openclaw",
         sessionPrefix: "slack:slash",
         ephemeral: true
       }
@@ -220,7 +220,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
   // Agent runtime
   agents: {
     defaults: {
-      workspace: "~/clawd",
+      workspace: "~/.openclaw/workspace",
       userTimezone: "America/Chicago",
       model: {
         primary: "anthropic/claude-sonnet-4-5",
@@ -267,14 +267,15 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
         model: "gemini-embedding-001",
         remote: {
           apiKey: "${GEMINI_API_KEY}"
-        }
+        },
+        extraPaths: ["../team-docs", "/srv/shared-notes"]
       },
       sandbox: {
         mode: "non-main",
         perSession: true,
-        workspaceRoot: "~/.clawdbot/sandboxes",
+        workspaceRoot: "~/.openclaw/sandboxes",
         docker: {
-          image: "moltbot-sandbox:bookworm-slim",
+          image: "openclaw-sandbox:bookworm-slim",
           workdir: "/workspace",
           readOnlyRoot: true,
           tmpfs: ["/tmp", "/var/tmp", "/run"],
@@ -339,7 +340,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
   // Cron jobs
   cron: {
     enabled: true,
-    store: "~/.clawdbot/cron/cron.json",
+    store: "~/.openclaw/cron/cron.json",
     maxConcurrentRuns: 2
   },
 
@@ -349,7 +350,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
     path: "/hooks",
     token: "shared-secret",
     presets: ["gmail"],
-    transformsDir: "~/.clawdbot/hooks",
+    transformsDir: "~/.openclaw/hooks",
     mappings: [
       {
         id: "gmail-hook",
@@ -369,7 +370,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
       }
     ],
     gmail: {
-      account: "moltbot@gmail.com",
+      account: "openclaw@gmail.com",
       label: "INBOX",
       topic: "projects/<project-id>/topics/gog-gmail-watch",
       subscription: "gog-gmail-watch-push",
@@ -388,7 +389,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
     mode: "local",
     port: 18789,
     bind: "loopback",
-    controlUi: { enabled: true, basePath: "/moltbot" },
+    controlUi: { enabled: true, basePath: "/openclaw" },
     auth: {
       mode: "token",
       token: "gateway-token",
@@ -425,7 +426,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
 ### Multi-platform setup
 ```json5
 {
-  agent: { workspace: "~/clawd" },
+  agent: { workspace: "~/.openclaw/workspace" },
   channels: {
     whatsapp: { allowFrom: ["+15555550123"] },
     telegram: {
@@ -462,7 +463,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
     }
   },
   agent: {
-    workspace: "~/clawd",
+    workspace: "~/.openclaw/workspace",
     model: {
       primary: "anthropic/claude-sonnet-4-5",
       fallbacks: ["anthropic/claude-opus-4-5"]
@@ -500,7 +501,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
     }
   },
   agent: {
-    workspace: "~/clawd",
+    workspace: "~/.openclaw/workspace",
     model: {
       primary: "anthropic/claude-opus-4-5",
       fallbacks: ["minimax/MiniMax-M2.1"]
@@ -517,7 +518,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
     theme: "professional assistant"
   },
   agent: {
-    workspace: "~/work-clawd",
+    workspace: "~/work-openclaw",
     elevated: { enabled: false }
   },
   channels: {
@@ -537,7 +538,7 @@ Save to `~/.clawdbot/moltbot.json` and you can DM the bot from that number.
 ```json5
 {
   agent: {
-    workspace: "~/clawd",
+    workspace: "~/.openclaw/workspace",
     model: { primary: "lmstudio/minimax-m2.1-gs32" }
   },
   models: {