@gemeentenijmegen/webapp 1.1.2 → 1.1.4

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutBucketVersioningCommand.d.ts

@@ -32,9 +32,11 @@ declare const PutBucketVersioningCommand_base: {
  *          </note>
  *          <note>
  *             <p>When you enable versioning on a bucket for the first time, it might take a short
- *             amount of time for the change to be fully propagated. We recommend that you wait for 15
+ *             amount of time for the change to be fully propagated. While this change is propagating,
+ *             you might encounter intermittent <code>HTTP 404 NoSuchKey</code> errors for requests to
+ *             objects created or updated after enabling versioning. We recommend that you wait for 15
  *             minutes after enabling versioning before issuing write operations (<code>PUT</code> or
- *                <code>DELETE</code>) on objects in the bucket. </p>
+ *             <code>DELETE</code>) on objects in the bucket. </p>
  *          </note>
  *          <p>Sets the versioning state of an existing bucket.</p>
  *          <p>You can set the versioning state with one of the following values:</p>
@@ -86,7 +88,7 @@ declare const PutBucketVersioningCommand_base: {
  * const input = { // PutBucketVersioningRequest
  *   Bucket: "STRING_VALUE", // required
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   MFA: "STRING_VALUE",
  *   VersioningConfiguration: { // VersioningConfiguration
  *     MFADelete: "Enabled" || "Disabled",

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutBucketWebsiteCommand.d.ts

@@ -162,7 +162,7 @@ declare const PutBucketWebsiteCommand_base: {
  * const input = { // PutBucketWebsiteRequest
  *   Bucket: "STRING_VALUE", // required
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   WebsiteConfiguration: { // WebsiteConfiguration
  *     ErrorDocument: { // ErrorDocument
  *       Key: "STRING_VALUE", // required

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutObjectAclCommand.d.ts

@@ -244,7 +244,7 @@ declare const PutObjectAclCommand_base: {
  *   },
  *   Bucket: "STRING_VALUE", // required
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   GrantFullControl: "STRING_VALUE",
  *   GrantRead: "STRING_VALUE",
  *   GrantReadACP: "STRING_VALUE",

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutObjectCommand.d.ts

@@ -45,8 +45,9 @@ declare const PutObjectCommand_base: {
  *                <li>
  *                   <p>
  *                      <b>Directory buckets</b> -
- *                   For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com/<i>key-name</i>
- *                      </code>. Path-style requests are not supported. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints</a> in the
+ *                   For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket-name</i>.s3express-<i>zone-id</i>.<i>region-code</i>.amazonaws.com/<i>key-name</i>
+ *                      </code>. Path-style requests are not supported. For more information about endpoints in Availability Zones, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints for directory buckets in Availability Zones</a> in the
+ *     <i>Amazon S3 User Guide</i>. For more information about endpoints in Local Zones, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-lzs-for-directory-buckets.html">Available Local Zone for directory buckets</a> in the
  *     <i>Amazon S3 User Guide</i>.</p>
  *                </li>
  *             </ul>
@@ -156,7 +157,7 @@ declare const PutObjectCommand_base: {
  *             <dd>
  *                <p>
  *                   <b>Directory buckets </b> - The HTTP Host header syntax is <code>
- *                      <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>.</p>
+ *                      <i>Bucket-name</i>.s3express-<i>zone-id</i>.<i>region-code</i>.amazonaws.com</code>.</p>
  *             </dd>
  *          </dl>
  *          <p>For more information about related Amazon S3 APIs, see the following:</p>
@@ -189,12 +190,14 @@ declare const PutObjectCommand_base: {
  *   ContentLength: Number("long"),
  *   ContentMD5: "STRING_VALUE",
  *   ContentType: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   ChecksumCRC32: "STRING_VALUE",
  *   ChecksumCRC32C: "STRING_VALUE",
+ *   ChecksumCRC64NVME: "STRING_VALUE",
  *   ChecksumSHA1: "STRING_VALUE",
  *   ChecksumSHA256: "STRING_VALUE",
  *   Expires: new Date("TIMESTAMP"),
+ *   IfMatch: "STRING_VALUE",
  *   IfNoneMatch: "STRING_VALUE",
  *   GrantFullControl: "STRING_VALUE",
  *   GrantRead: "STRING_VALUE",
@@ -228,8 +231,10 @@ declare const PutObjectCommand_base: {
  * //   ETag: "STRING_VALUE",
  * //   ChecksumCRC32: "STRING_VALUE",
  * //   ChecksumCRC32C: "STRING_VALUE",
+ * //   ChecksumCRC64NVME: "STRING_VALUE",
  * //   ChecksumSHA1: "STRING_VALUE",
  * //   ChecksumSHA256: "STRING_VALUE",
+ * //   ChecksumType: "COMPOSITE" || "FULL_OBJECT",
  * //   ServerSideEncryption: "AES256" || "aws:kms" || "aws:kms:dsse",
  * //   VersionId: "STRING_VALUE",
  * //   SSECustomerAlgorithm: "STRING_VALUE",
@@ -286,44 +291,42 @@ declare const PutObjectCommand_base: {
  * <p>Base exception class for all service exceptions from S3 service.</p>
  *
  * @public
- * @example To upload an object and specify optional tags
+ * @example To create an object.
  * ```javascript
- * // The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore S3 returns version ID of the newly created object.
+ * // The following example creates an object. If the bucket is versioning enabled, S3 returns version ID in response.
  * const input = {
- *   "Body": "c:\\HappyFace.jpg",
+ *   "Body": "filetoupload",
  *   "Bucket": "examplebucket",
- *   "Key": "HappyFace.jpg",
- *   "Tagging": "key1=value1&key2=value2"
+ *   "Key": "objectkey"
  * };
  * const command = new PutObjectCommand(input);
  * const response = await client.send(command);
  * /* response ==
  * {
  *   "ETag": "\"6805f2cfc46c0f04559748bb039d69ae\"",
- *   "VersionId": "psM2sYY4.o1501dSx8wMvnkOzSBB.V4a"
+ *   "VersionId": "Bvq0EDKxOcXLJXNo_Lkz37eM3R4pfzyQ"
  * }
  * *\/
- * // example id: to-upload-an-object-and-specify-optional-tags-1481762310955
+ * // example id: to-create-an-object-1483147613675
  * ```
  *
- * @example To upload an object and specify canned ACL.
+ * @example To upload an object
  * ```javascript
- * // The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
+ * // The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file syntax. S3 returns VersionId of the newly created object.
  * const input = {
- *   "ACL": "authenticated-read",
- *   "Body": "filetoupload",
+ *   "Body": "HappyFace.jpg",
  *   "Bucket": "examplebucket",
- *   "Key": "exampleobject"
+ *   "Key": "HappyFace.jpg"
  * };
  * const command = new PutObjectCommand(input);
  * const response = await client.send(command);
  * /* response ==
  * {
  *   "ETag": "\"6805f2cfc46c0f04559748bb039d69ae\"",
- *   "VersionId": "Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr"
+ *   "VersionId": "tpf3zF08nBplQK1XLOefGskR7mGDwcDk"
  * }
  * *\/
- * // example id: to-upload-an-object-and-specify-canned-acl-1483397779571
+ * // example id: to-upload-an-object-1481760101010
  * ```
  *
  * @example To upload an object and specify server-side encryption and object tags
@@ -371,64 +374,66 @@ declare const PutObjectCommand_base: {
  * // example id: to-upload-object-and-specify-user-defined-metadata-1483396974757
  * ```
  *
- * @example To upload an object (specify optional headers)
+ * @example To upload an object and specify optional tags
  * ```javascript
- * // The following example uploads an object. The request specifies optional request headers to directs S3 to use specific storage class and use server-side encryption.
+ * // The following example uploads an object. The request specifies optional object tags. The bucket is versioned, therefore S3 returns version ID of the newly created object.
  * const input = {
- *   "Body": "HappyFace.jpg",
+ *   "Body": "c:\\HappyFace.jpg",
  *   "Bucket": "examplebucket",
  *   "Key": "HappyFace.jpg",
- *   "ServerSideEncryption": "AES256",
- *   "StorageClass": "STANDARD_IA"
+ *   "Tagging": "key1=value1&key2=value2"
  * };
  * const command = new PutObjectCommand(input);
  * const response = await client.send(command);
  * /* response ==
  * {
  *   "ETag": "\"6805f2cfc46c0f04559748bb039d69ae\"",
- *   "ServerSideEncryption": "AES256",
- *   "VersionId": "CG612hodqujkf8FaaNfp8U..FIhLROcp"
+ *   "VersionId": "psM2sYY4.o1501dSx8wMvnkOzSBB.V4a"
  * }
  * *\/
- * // example id: to-upload-an-object-(specify-optional-headers)
+ * // example id: to-upload-an-object-and-specify-optional-tags-1481762310955
  * ```
  *
- * @example To create an object.
+ * @example To upload an object (specify optional headers)
  * ```javascript
- * // The following example creates an object. If the bucket is versioning enabled, S3 returns version ID in response.
+ * // The following example uploads an object. The request specifies optional request headers to directs S3 to use specific storage class and use server-side encryption.
  * const input = {
- *   "Body": "filetoupload",
+ *   "Body": "HappyFace.jpg",
  *   "Bucket": "examplebucket",
- *   "Key": "objectkey"
+ *   "Key": "HappyFace.jpg",
+ *   "ServerSideEncryption": "AES256",
+ *   "StorageClass": "STANDARD_IA"
  * };
  * const command = new PutObjectCommand(input);
  * const response = await client.send(command);
  * /* response ==
  * {
  *   "ETag": "\"6805f2cfc46c0f04559748bb039d69ae\"",
- *   "VersionId": "Bvq0EDKxOcXLJXNo_Lkz37eM3R4pfzyQ"
+ *   "ServerSideEncryption": "AES256",
+ *   "VersionId": "CG612hodqujkf8FaaNfp8U..FIhLROcp"
  * }
  * *\/
- * // example id: to-create-an-object-1483147613675
+ * // example id: to-upload-an-object-(specify-optional-headers)
  * ```
  *
- * @example To upload an object
+ * @example To upload an object and specify canned ACL.
  * ```javascript
- * // The following example uploads an object to a versioning-enabled bucket. The source file is specified using Windows file syntax. S3 returns VersionId of the newly created object.
+ * // The following example uploads and object. The request specifies optional canned ACL (access control list) to all READ access to authenticated users. If the bucket is versioning enabled, S3 returns version ID in response.
  * const input = {
- *   "Body": "HappyFace.jpg",
+ *   "ACL": "authenticated-read",
+ *   "Body": "filetoupload",
  *   "Bucket": "examplebucket",
- *   "Key": "HappyFace.jpg"
+ *   "Key": "exampleobject"
  * };
  * const command = new PutObjectCommand(input);
  * const response = await client.send(command);
  * /* response ==
  * {
  *   "ETag": "\"6805f2cfc46c0f04559748bb039d69ae\"",
- *   "VersionId": "tpf3zF08nBplQK1XLOefGskR7mGDwcDk"
+ *   "VersionId": "Kirh.unyZwjQ69YxcQLA8z4F5j3kJJKr"
  * }
  * *\/
- * // example id: to-upload-an-object-1481760101010
+ * // example id: to-upload-an-object-and-specify-canned-acl-1483397779571
  * ```
  *
  */

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutObjectLegalHoldCommand.d.ts

@@ -49,7 +49,7 @@ declare const PutObjectLegalHoldCommand_base: {
  *   RequestPayer: "requester",
  *   VersionId: "STRING_VALUE",
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   ExpectedBucketOwner: "STRING_VALUE",
  * };
  * const command = new PutObjectLegalHoldCommand(input);

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutObjectLockConfigurationCommand.d.ts

@@ -72,7 +72,7 @@ declare const PutObjectLockConfigurationCommand_base: {
  *   RequestPayer: "requester",
  *   Token: "STRING_VALUE",
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   ExpectedBucketOwner: "STRING_VALUE",
  * };
  * const command = new PutObjectLockConfigurationCommand(input);

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutObjectRetentionCommand.d.ts

@@ -24,7 +24,7 @@ export interface PutObjectRetentionCommandOutput extends PutObjectRetentionOutpu
 declare const PutObjectRetentionCommand_base: {
     new (input: PutObjectRetentionCommandInput): import("@smithy/smithy-client").CommandImpl<PutObjectRetentionCommandInput, PutObjectRetentionCommandOutput, S3ClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes>;
     new (__0_0: PutObjectRetentionCommandInput): import("@smithy/smithy-client").CommandImpl<PutObjectRetentionCommandInput, PutObjectRetentionCommandOutput, S3ClientResolvedConfig, ServiceInputTypes, ServiceOutputTypes>;
-    getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions; /** @internal type navigation helper, not in runtime. */
+    getEndpointParameterInstructions(): import("@smithy/middleware-endpoint").EndpointParameterInstructions;
 };
 /**
  * <note>
@@ -52,7 +52,7 @@ declare const PutObjectRetentionCommand_base: {
  *   VersionId: "STRING_VALUE",
  *   BypassGovernanceRetention: true || false,
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   ExpectedBucketOwner: "STRING_VALUE",
  * };
  * const command = new PutObjectRetentionCommand(input);

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutObjectTaggingCommand.d.ts

@@ -94,7 +94,7 @@ declare const PutObjectTaggingCommand_base: {
  *   Key: "STRING_VALUE", // required
  *   VersionId: "STRING_VALUE",
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   Tagging: { // Tagging
  *     TagSet: [ // TagSet // required
  *       { // Tag

package/node_modules/@aws-sdk/client-s3/dist-types/commands/PutPublicAccessBlockCommand.d.ts

@@ -76,7 +76,7 @@ declare const PutPublicAccessBlockCommand_base: {
  * const input = { // PutPublicAccessBlockRequest
  *   Bucket: "STRING_VALUE", // required
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   PublicAccessBlockConfiguration: { // PublicAccessBlockConfiguration
  *     BlockPublicAcls: true || false,
  *     IgnorePublicAcls: true || false,

package/node_modules/@aws-sdk/client-s3/dist-types/commands/RestoreObjectCommand.d.ts

@@ -324,7 +324,7 @@ declare const RestoreObjectCommand_base: {
  *     },
  *   },
  *   RequestPayer: "requester",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   ExpectedBucketOwner: "STRING_VALUE",
  * };
  * const command = new RestoreObjectCommand(input);

package/node_modules/@aws-sdk/client-s3/dist-types/commands/UploadPartCommand.d.ts

@@ -54,8 +54,9 @@ declare const UploadPartCommand_base: {
  *          <note>
  *             <p>
  *                <b>Directory buckets</b> -
- *             For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com/<i>key-name</i>
- *                </code>. Path-style requests are not supported. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints</a> in the
+ *             For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket-name</i>.s3express-<i>zone-id</i>.<i>region-code</i>.amazonaws.com/<i>key-name</i>
+ *                </code>. Path-style requests are not supported. For more information about endpoints in Availability Zones, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints for directory buckets in Availability Zones</a> in the
+ *     <i>Amazon S3 User Guide</i>. For more information about endpoints in Local Zones, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-lzs-for-directory-buckets.html">Available Local Zone for directory buckets</a> in the
  *     <i>Amazon S3 User Guide</i>.</p>
  *          </note>
  *          <dl>
@@ -186,7 +187,7 @@ declare const UploadPartCommand_base: {
  *             <dd>
  *                <p>
  *                   <b>Directory buckets </b> - The HTTP Host header syntax is <code>
- *                      <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>.</p>
+ *                      <i>Bucket-name</i>.s3express-<i>zone-id</i>.<i>region-code</i>.amazonaws.com</code>.</p>
  *             </dd>
  *          </dl>
  *          <p>The following operations are related to <code>UploadPart</code>:</p>
@@ -228,9 +229,10 @@ declare const UploadPartCommand_base: {
  *   Bucket: "STRING_VALUE", // required
  *   ContentLength: Number("long"),
  *   ContentMD5: "STRING_VALUE",
- *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256",
+ *   ChecksumAlgorithm: "CRC32" || "CRC32C" || "SHA1" || "SHA256" || "CRC64NVME",
  *   ChecksumCRC32: "STRING_VALUE",
  *   ChecksumCRC32C: "STRING_VALUE",
+ *   ChecksumCRC64NVME: "STRING_VALUE",
  *   ChecksumSHA1: "STRING_VALUE",
  *   ChecksumSHA256: "STRING_VALUE",
  *   Key: "STRING_VALUE", // required
@@ -249,6 +251,7 @@ declare const UploadPartCommand_base: {
  * //   ETag: "STRING_VALUE",
  * //   ChecksumCRC32: "STRING_VALUE",
  * //   ChecksumCRC32C: "STRING_VALUE",
+ * //   ChecksumCRC64NVME: "STRING_VALUE",
  * //   ChecksumSHA1: "STRING_VALUE",
  * //   ChecksumSHA256: "STRING_VALUE",
  * //   SSECustomerAlgorithm: "STRING_VALUE",

package/node_modules/@aws-sdk/client-s3/dist-types/commands/UploadPartCopyCommand.d.ts

@@ -48,8 +48,9 @@ declare const UploadPartCopyCommand_base: {
  *          <note>
  *             <p>
  *                <b>Directory buckets</b> -
- *             For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com/<i>key-name</i>
- *                </code>. Path-style requests are not supported. For more information, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints</a> in the
+ *             For directory buckets, you must make requests for this API operation to the Zonal endpoint. These endpoints support virtual-hosted-style requests in the format <code>https://<i>bucket-name</i>.s3express-<i>zone-id</i>.<i>region-code</i>.amazonaws.com/<i>key-name</i>
+ *                </code>. Path-style requests are not supported. For more information about endpoints in Availability Zones, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-express-Regions-and-Zones.html">Regional and Zonal endpoints for directory buckets in Availability Zones</a> in the
+ *     <i>Amazon S3 User Guide</i>. For more information about endpoints in Local Zones, see <a href="https://docs.aws.amazon.com/AmazonS3/latest/userguide/s3-lzs-for-directory-buckets.html">Available Local Zone for directory buckets</a> in the
  *     <i>Amazon S3 User Guide</i>.</p>
  *          </note>
  *          <dl>
@@ -216,7 +217,7 @@ declare const UploadPartCopyCommand_base: {
  *             <dd>
  *                <p>
  *                   <b>Directory buckets </b> - The HTTP Host header syntax is <code>
- *                      <i>Bucket_name</i>.s3express-<i>az_id</i>.<i>region</i>.amazonaws.com</code>.</p>
+ *                      <i>Bucket-name</i>.s3express-<i>zone-id</i>.<i>region-code</i>.amazonaws.com</code>.</p>
  *             </dd>
  *          </dl>
  *          <p>The following operations are related to <code>UploadPartCopy</code>:</p>
@@ -288,6 +289,7 @@ declare const UploadPartCopyCommand_base: {
  * //     LastModified: new Date("TIMESTAMP"),
  * //     ChecksumCRC32: "STRING_VALUE",
  * //     ChecksumCRC32C: "STRING_VALUE",
+ * //     ChecksumCRC64NVME: "STRING_VALUE",
  * //     ChecksumSHA1: "STRING_VALUE",
  * //     ChecksumSHA256: "STRING_VALUE",
  * //   },

package/node_modules/@aws-sdk/client-s3/dist-types/commands/WriteGetObjectResponseCommand.d.ts

@@ -88,6 +88,7 @@ declare const WriteGetObjectResponseCommand_base: {
  *   ContentType: "STRING_VALUE",
  *   ChecksumCRC32: "STRING_VALUE",
  *   ChecksumCRC32C: "STRING_VALUE",
+ *   ChecksumCRC64NVME: "STRING_VALUE",
  *   ChecksumSHA1: "STRING_VALUE",
  *   ChecksumSHA256: "STRING_VALUE",
  *   DeleteMarker: true || false,

package/node_modules/@aws-sdk/client-s3/dist-types/commands/index.d.ts

@@ -2,6 +2,7 @@ export * from "./AbortMultipartUploadCommand";
 export * from "./CompleteMultipartUploadCommand";
 export * from "./CopyObjectCommand";
 export * from "./CreateBucketCommand";
+export * from "./CreateBucketMetadataTableConfigurationCommand";
 export * from "./CreateMultipartUploadCommand";
 export * from "./CreateSessionCommand";
 export * from "./DeleteBucketAnalyticsConfigurationCommand";
@@ -11,6 +12,7 @@ export * from "./DeleteBucketEncryptionCommand";
 export * from "./DeleteBucketIntelligentTieringConfigurationCommand";
 export * from "./DeleteBucketInventoryConfigurationCommand";
 export * from "./DeleteBucketLifecycleCommand";
+export * from "./DeleteBucketMetadataTableConfigurationCommand";
 export * from "./DeleteBucketMetricsConfigurationCommand";
 export * from "./DeleteBucketOwnershipControlsCommand";
 export * from "./DeleteBucketPolicyCommand";
@@ -31,6 +33,7 @@ export * from "./GetBucketInventoryConfigurationCommand";
 export * from "./GetBucketLifecycleConfigurationCommand";
 export * from "./GetBucketLocationCommand";
 export * from "./GetBucketLoggingCommand";
+export * from "./GetBucketMetadataTableConfigurationCommand";
 export * from "./GetBucketMetricsConfigurationCommand";
 export * from "./GetBucketNotificationConfigurationCommand";
 export * from "./GetBucketOwnershipControlsCommand";