@gemeentenijmegen/webapp 1.1.11 → 1.1.13

package/node_modules/@aws-sdk/client-ssm/dist-types/models/models_2.d.ts

@@ -1,3302 +0,0 @@
-import { ExceptionOptionType as __ExceptionOptionType } from "@smithy/smithy-client";
-import { AlarmConfiguration, AssociationComplianceSeverity, AssociationDescription, AssociationStatus, AssociationSyncCompliance, AttachmentsSource, DocumentDescription, DocumentFormat, DocumentHashType, ExecutionMode, InstanceAssociationOutputLocation, MaintenanceWindowTaskType, MetadataValue, OperatingSystem, OpsItemDataValue, OpsItemNotification, PatchAction, PatchComplianceLevel, PatchComplianceStatus, PatchFilterGroup, PatchRuleGroup, PatchSource, RelatedOpsItem, ResourceDataSyncSource, ResourceTypeForTagging, Runbook, Tag, Target, TargetLocation } from "./models_0";
-import { CloudWatchOutputConfig, Command, DocumentReviewCommentSource, InventoryFilter, InventoryGroup, LoggingInfo, MaintenanceWindowResourceType, MaintenanceWindowTaskCutoffBehavior, MaintenanceWindowTaskInvocationParameters, MaintenanceWindowTaskParameterValueExpression, NodeAggregatorType, NodeAttributeName, NodeFilter, NodeTypeName, NotificationConfig, OpsFilter, OpsItemStatus, OpsResultAttribute, ResultAttribute, ServiceSetting } from "./models_1";
-import { SSMServiceException as __BaseException } from "./SSMServiceException";
-/**
- * @public
- */
-export interface RegisterPatchBaselineForPatchGroupResult {
-    /**
-     * <p>The ID of the patch baseline the patch group was registered with.</p>
-     * @public
-     */
-    BaselineId?: string | undefined;
-    /**
-     * <p>The name of the patch group registered with the patch baseline.</p>
-     * @public
-     */
-    PatchGroup?: string | undefined;
-}
-/**
- * @public
- */
-export interface RegisterTargetWithMaintenanceWindowRequest {
-    /**
-     * <p>The ID of the maintenance window the target should be registered with.</p>
-     * @public
-     */
-    WindowId: string | undefined;
-    /**
-     * <p>The type of target being registered with the maintenance window.</p>
-     * @public
-     */
-    ResourceType: MaintenanceWindowResourceType | undefined;
-    /**
-     * <p>The targets to register with the maintenance window. In other words, the managed nodes to
-     *    run commands on when the maintenance window runs.</p>
-     *          <note>
-     *             <p>If a single maintenance window task is registered with multiple targets, its task
-     *     invocations occur sequentially and not in parallel. If your task must run on multiple targets at
-     *     the same time, register a task for each target individually and assign each task the same
-     *     priority level.</p>
-     *          </note>
-     *          <p>You can specify targets using managed node IDs, resource group names, or tags that have been
-     *    applied to managed nodes.</p>
-     *          <p>
-     *             <b>Example 1</b>: Specify managed node IDs</p>
-     *          <p>
-     *             <code>Key=InstanceIds,Values=<instance-id-1>,<instance-id-2>,<instance-id-3></code>
-     *          </p>
-     *          <p>
-     *             <b>Example 2</b>: Use tag key-pairs applied to managed
-     *    nodes</p>
-     *          <p>
-     *             <code>Key=tag:<my-tag-key>,Values=<my-tag-value-1>,<my-tag-value-2></code>
-     *          </p>
-     *          <p>
-     *             <b>Example 3</b>: Use tag-keys applied to managed nodes</p>
-     *          <p>
-     *             <code>Key=tag-key,Values=<my-tag-key-1>,<my-tag-key-2></code>
-     *          </p>
-     *          <p>
-     *             <b>Example 4</b>: Use resource group names</p>
-     *          <p>
-     *             <code>Key=resource-groups:Name,Values=<resource-group-name></code>
-     *          </p>
-     *          <p>
-     *             <b>Example 5</b>: Use filters for resource group types</p>
-     *          <p>
-     *             <code>Key=resource-groups:ResourceTypeFilters,Values=<resource-type-1>,<resource-type-2></code>
-     *          </p>
-     *          <note>
-     *             <p>For <code>Key=resource-groups:ResourceTypeFilters</code>, specify resource types in the
-     *     following format</p>
-     *             <p>
-     *                <code>Key=resource-groups:ResourceTypeFilters,Values=AWS::EC2::INSTANCE,AWS::EC2::VPC</code>
-     *             </p>
-     *          </note>
-     *          <p>For more information about these examples formats, including the best use case for each one,
-     *    see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/mw-cli-tutorial-targets-examples.html">Examples: Register
-     *     targets with a maintenance window</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    Targets: Target[] | undefined;
-    /**
-     * <p>User-provided value that will be included in any Amazon CloudWatch Events events raised while
-     *    running tasks for these targets in this maintenance window.</p>
-     * @public
-     */
-    OwnerInformation?: string | undefined;
-    /**
-     * <p>An optional name for the target.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>An optional description for the target.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>User-provided idempotency token.</p>
-     * @public
-     */
-    ClientToken?: string | undefined;
-}
-/**
- * @public
- */
-export interface RegisterTargetWithMaintenanceWindowResult {
-    /**
-     * <p>The ID of the target definition in this maintenance window.</p>
-     * @public
-     */
-    WindowTargetId?: string | undefined;
-}
-/**
- * <p>You attempted to register a <code>LAMBDA</code> or <code>STEP_FUNCTIONS</code> task in a
- *    region where the corresponding service isn't available. </p>
- * @public
- */
-export declare class FeatureNotAvailableException extends __BaseException {
-    readonly name: "FeatureNotAvailableException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<FeatureNotAvailableException, __BaseException>);
-}
-/**
- * @public
- */
-export interface RegisterTaskWithMaintenanceWindowRequest {
-    /**
-     * <p>The ID of the maintenance window the task should be added to.</p>
-     * @public
-     */
-    WindowId: string | undefined;
-    /**
-     * <p>The targets (either managed nodes or maintenance window targets).</p>
-     *          <note>
-     *             <p>One or more targets must be specified for maintenance window Run Command-type tasks.
-     *     Depending on the task, targets are optional for other maintenance window task types (Automation,
-     *      Lambda, and Step Functions). For more information about running tasks
-     *     that don't specify targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">Registering
-     *      maintenance window tasks without targets</a> in the
-     *     <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     *          </note>
-     *          <p>Specify managed nodes using the following format: </p>
-     *          <p>
-     *             <code>Key=InstanceIds,Values=<instance-id-1>,<instance-id-2></code>
-     *          </p>
-     *          <p>Specify maintenance window targets using the following format:</p>
-     *          <p>
-     *             <code>Key=WindowTargetIds,Values=<window-target-id-1>,<window-target-id-2></code>
-     *          </p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>The ARN of the task to run.</p>
-     * @public
-     */
-    TaskArn: string | undefined;
-    /**
-     * <p>The Amazon Resource Name (ARN) of the IAM service role for
-     *                 Amazon Web Services Systems Manager to assume when running a maintenance window task. If you do not specify a
-     *                 service role ARN, Systems Manager uses a service-linked role in your account. If no
-     *                 appropriate service-linked role for Systems Manager exists in your account, it is created when
-     *                 you run <code>RegisterTaskWithMaintenanceWindow</code>.</p>
-     *          <p>However, for an improved security posture, we strongly recommend creating a custom
-     *                 policy and custom service role for running your maintenance window tasks. The policy
-     *                 can be crafted to provide only the permissions needed for your particular
-     *                 maintenance window tasks. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-maintenance-permissions.html">Setting up Maintenance Windows</a> in the in the
-     *                     <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    ServiceRoleArn?: string | undefined;
-    /**
-     * <p>The type of task being registered.</p>
-     * @public
-     */
-    TaskType: MaintenanceWindowTaskType | undefined;
-    /**
-     * <p>The parameters that should be passed to the task when it is run.</p>
-     *          <note>
-     *             <p>
-     *                <code>TaskParameters</code> has been deprecated. To specify parameters to pass to a task when it runs,
-     *       instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code> structure. For information
-     *       about how Systems Manager handles these options for the supported maintenance window task
-     *       types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</p>
-     *          </note>
-     * @public
-     */
-    TaskParameters?: Record<string, MaintenanceWindowTaskParameterValueExpression> | undefined;
-    /**
-     * <p>The parameters that the task should use during execution. Populate only the fields that
-     *    match the task type. All other fields should be empty. </p>
-     * @public
-     */
-    TaskInvocationParameters?: MaintenanceWindowTaskInvocationParameters | undefined;
-    /**
-     * <p>The priority of the task in the maintenance window, the lower the number the higher the
-     *    priority. Tasks in a maintenance window are scheduled in priority order with tasks that have the
-     *    same priority scheduled in parallel.</p>
-     * @public
-     */
-    Priority?: number | undefined;
-    /**
-     * <p>The maximum number of targets this task can be run for, in parallel.</p>
-     *          <note>
-     *             <p>Although this element is listed as "Required: No", a value can be omitted only when you are
-     *     registering or updating a <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">targetless
-     *      task</a> You must provide a value in all other cases.</p>
-     *             <p>For maintenance window tasks without a target specified, you can't supply a value for this
-     *     option. Instead, the system inserts a placeholder value of <code>1</code>. This value doesn't
-     *     affect the running of your task.</p>
-     *          </note>
-     * @public
-     */
-    MaxConcurrency?: string | undefined;
-    /**
-     * <p>The maximum number of errors allowed before this task stops being scheduled.</p>
-     *          <note>
-     *             <p>Although this element is listed as "Required: No", a value can be omitted only when you are
-     *     registering or updating a <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">targetless
-     *      task</a> You must provide a value in all other cases.</p>
-     *             <p>For maintenance window tasks without a target specified, you can't supply a value for this
-     *     option. Instead, the system inserts a placeholder value of <code>1</code>. This value doesn't
-     *     affect the running of your task.</p>
-     *          </note>
-     * @public
-     */
-    MaxErrors?: string | undefined;
-    /**
-     * <p>A structure containing information about an Amazon Simple Storage Service (Amazon S3) bucket
-     *    to write managed node-level logs to. </p>
-     *          <note>
-     *             <p>
-     *                <code>LoggingInfo</code> has been deprecated. To specify an Amazon Simple Storage Service (Amazon S3) bucket to contain logs, instead use the
-     *       <code>OutputS3BucketName</code> and <code>OutputS3KeyPrefix</code> options in the <code>TaskInvocationParameters</code> structure.
-     *       For information about how Amazon Web Services Systems Manager handles these options for the supported maintenance
-     *       window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</p>
-     *          </note>
-     * @public
-     */
-    LoggingInfo?: LoggingInfo | undefined;
-    /**
-     * <p>An optional name for the task.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>An optional description for the task.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>User-provided idempotency token.</p>
-     * @public
-     */
-    ClientToken?: string | undefined;
-    /**
-     * <p>Indicates whether tasks should continue to run after the cutoff time specified in the
-     *    maintenance windows is reached. </p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>CONTINUE_TASK</code>: When the cutoff time is reached, any tasks that are running
-     *      continue. The default value.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>CANCEL_TASK</code>:</p>
-     *                <ul>
-     *                   <li>
-     *                      <p>For Automation, Lambda, Step Functions tasks: When the cutoff
-     *        time is reached, any task invocations that are already running continue, but no new task
-     *        invocations are started.</p>
-     *                   </li>
-     *                   <li>
-     *                      <p>For Run Command tasks: When the cutoff time is reached, the system sends a <a>CancelCommand</a> operation that attempts to cancel the command associated with the
-     *        task. However, there is no guarantee that the command will be terminated and the underlying
-     *        process stopped.</p>
-     *                   </li>
-     *                </ul>
-     *                <p>The status for tasks that are not completed is <code>TIMED_OUT</code>.</p>
-     *             </li>
-     *          </ul>
-     * @public
-     */
-    CutoffBehavior?: MaintenanceWindowTaskCutoffBehavior | undefined;
-    /**
-     * <p>The CloudWatch alarm you want to apply to your maintenance window task.</p>
-     * @public
-     */
-    AlarmConfiguration?: AlarmConfiguration | undefined;
-}
-/**
- * @public
- */
-export interface RegisterTaskWithMaintenanceWindowResult {
-    /**
-     * <p>The ID of the task in the maintenance window.</p>
-     * @public
-     */
-    WindowTaskId?: string | undefined;
-}
-/**
- * @public
- */
-export interface RemoveTagsFromResourceRequest {
-    /**
-     * <p>The type of resource from which you want to remove a tag.</p>
-     *          <note>
-     *             <p>The <code>ManagedInstance</code> type for this API operation is only for on-premises
-     *     managed nodes. Specify the name of the managed node in the following format:
-     *       <code>mi-<i>ID_number</i>
-     *                </code>. For example,
-     *     <code>mi-1a2b3c4d5e6f</code>.</p>
-     *          </note>
-     * @public
-     */
-    ResourceType: ResourceTypeForTagging | undefined;
-    /**
-     * <p>The ID of the resource from which you want to remove tags. For example:</p>
-     *          <p>ManagedInstance: mi-012345abcde</p>
-     *          <p>MaintenanceWindow: mw-012345abcde</p>
-     *          <p>
-     *             <code>Automation</code>: <code>example-c160-4567-8519-012345abcde</code>
-     *          </p>
-     *          <p>PatchBaseline: pb-012345abcde</p>
-     *          <p>OpsMetadata object: <code>ResourceID</code> for tagging is created from the Amazon Resource
-     *    Name (ARN) for the object. Specifically, <code>ResourceID</code> is created from the strings that
-     *    come after the word <code>opsmetadata</code> in the ARN. For example, an OpsMetadata object with
-     *    an ARN of <code>arn:aws:ssm:us-east-2:1234567890:opsmetadata/aws/ssm/MyGroup/appmanager</code>
-     *    has a <code>ResourceID</code> of either <code>aws/ssm/MyGroup/appmanager</code> or
-     *     <code>/aws/ssm/MyGroup/appmanager</code>.</p>
-     *          <p>For the Document and Parameter values, use the name of the resource.</p>
-     *          <note>
-     *             <p>The <code>ManagedInstance</code> type for this API operation is only for on-premises
-     *     managed nodes. Specify the name of the managed node in the following format: mi-ID_number. For
-     *     example, mi-1a2b3c4d5e6f.</p>
-     *          </note>
-     * @public
-     */
-    ResourceId: string | undefined;
-    /**
-     * <p>Tag keys that you want to remove from the specified resource.</p>
-     * @public
-     */
-    TagKeys: string[] | undefined;
-}
-/**
- * @public
- */
-export interface RemoveTagsFromResourceResult {
-}
-/**
- * <p>The request body of the ResetServiceSetting API operation.</p>
- * @public
- */
-export interface ResetServiceSettingRequest {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the service setting to reset. The setting ID can be one of
-     *    the following.</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/appmanager/appmanager-enabled</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/automation/customer-script-log-destination</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/automation/customer-script-log-group-name</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>/ssm/automation/enable-adaptive-concurrency</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/documents/console/public-sharing-permission</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/managed-instance/activation-tier</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/managed-instance/default-ec2-instance-management-role</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/opsinsights/opscenter</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/parameter-store/default-parameter-tier</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/parameter-store/high-throughput-enabled</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     * @public
-     */
-    SettingId: string | undefined;
-}
-/**
- * <p>The result body of the ResetServiceSetting API operation.</p>
- * @public
- */
-export interface ResetServiceSettingResult {
-    /**
-     * <p>The current, effective service setting after calling the ResetServiceSetting API
-     *    operation.</p>
-     * @public
-     */
-    ServiceSetting?: ServiceSetting | undefined;
-}
-/**
- * @public
- */
-export interface ResumeSessionRequest {
-    /**
-     * <p>The ID of the disconnected session to resume.</p>
-     * @public
-     */
-    SessionId: string | undefined;
-}
-/**
- * @public
- */
-export interface ResumeSessionResponse {
-    /**
-     * <p>The ID of the session.</p>
-     * @public
-     */
-    SessionId?: string | undefined;
-    /**
-     * <p>An encrypted token value containing session and caller information. Used to authenticate the
-     *    connection to the managed node.</p>
-     * @public
-     */
-    TokenValue?: string | undefined;
-    /**
-     * <p>A URL back to SSM Agent on the managed node that the Session Manager client uses to send commands and
-     *    receive output from the managed node. Format: <code>wss://ssmmessages.<b>region</b>.amazonaws.com/v1/data-channel/<b>session-id</b>?stream=(input|output)</code>.</p>
-     *          <p>
-     *             <b>region</b> represents the Region identifier for an
-     * 						Amazon Web Services Region supported by Amazon Web Services Systems Manager, such as <code>us-east-2</code> for the US East (Ohio) Region.
-     * 						For a list of supported <b>region</b> values, see the <b>Region</b> column in <a href="https://docs.aws.amazon.com/general/latest/gr/ssm.html#ssm_region">Systems Manager service endpoints</a> in the
-     *         <i>Amazon Web Services General Reference</i>.</p>
-     *          <p>
-     *             <b>session-id</b> represents the ID of a Session Manager session, such as
-     *     <code>1a2b3c4dEXAMPLE</code>.</p>
-     * @public
-     */
-    StreamUrl?: string | undefined;
-}
-/**
- * <p>The specified step name and execution ID don't exist. Verify the information and try
- *    again.</p>
- * @public
- */
-export declare class AutomationStepNotFoundException extends __BaseException {
-    readonly name: "AutomationStepNotFoundException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<AutomationStepNotFoundException, __BaseException>);
-}
-/**
- * <p>The signal isn't valid for the current Automation execution.</p>
- * @public
- */
-export declare class InvalidAutomationSignalException extends __BaseException {
-    readonly name: "InvalidAutomationSignalException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidAutomationSignalException, __BaseException>);
-}
-/**
- * @public
- * @enum
- */
-export declare const SignalType: {
-    readonly APPROVE: "Approve";
-    readonly REJECT: "Reject";
-    readonly RESUME: "Resume";
-    readonly REVOKE: "Revoke";
-    readonly START_STEP: "StartStep";
-    readonly STOP_STEP: "StopStep";
-};
-/**
- * @public
- */
-export type SignalType = (typeof SignalType)[keyof typeof SignalType];
-/**
- * @public
- */
-export interface SendAutomationSignalRequest {
-    /**
-     * <p>The unique identifier for an existing Automation execution that you want to send the signal
-     *    to.</p>
-     * @public
-     */
-    AutomationExecutionId: string | undefined;
-    /**
-     * <p>The type of signal to send to an Automation execution. </p>
-     * @public
-     */
-    SignalType: SignalType | undefined;
-    /**
-     * <p>The data sent with the signal. The data schema depends on the type of signal used in the
-     *    request.</p>
-     *          <p>For <code>Approve</code> and <code>Reject</code> signal types, the payload is an optional
-     *    comment that you can send with the signal type. For example:</p>
-     *          <p>
-     *             <code>Comment="Looks good"</code>
-     *          </p>
-     *          <p>For <code>StartStep</code> and <code>Resume</code> signal types, you must send the name of
-     *    the Automation step to start or resume as the payload. For example:</p>
-     *          <p>
-     *             <code>StepName="step1"</code>
-     *          </p>
-     *          <p>For the <code>StopStep</code> signal type, you must send the step execution ID as the
-     *    payload. For example:</p>
-     *          <p>
-     *             <code>StepExecutionId="97fff367-fc5a-4299-aed8-0123456789ab"</code>
-     *          </p>
-     * @public
-     */
-    Payload?: Record<string, string[]> | undefined;
-}
-/**
- * @public
- */
-export interface SendAutomationSignalResult {
-}
-/**
- * <p>One or more configuration items isn't valid. Verify that a valid Amazon Resource Name (ARN)
- *    was provided for an Amazon Simple Notification Service topic.</p>
- * @public
- */
-export declare class InvalidNotificationConfig extends __BaseException {
-    readonly name: "InvalidNotificationConfig";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidNotificationConfig, __BaseException>);
-}
-/**
- * <p>The S3 bucket doesn't exist.</p>
- * @public
- */
-export declare class InvalidOutputFolder extends __BaseException {
-    readonly name: "InvalidOutputFolder";
-    readonly $fault: "client";
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidOutputFolder, __BaseException>);
-}
-/**
- * <p>The role name can't contain invalid characters. Also verify that you specified an IAM role for notifications that includes the required trust policy. For information about
- *    configuring the IAM role for Run Command notifications, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring Systems Manager status changes using Amazon SNS notifications</a> in
- *    the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
- * @public
- */
-export declare class InvalidRole extends __BaseException {
-    readonly name: "InvalidRole";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidRole, __BaseException>);
-}
-/**
- * @public
- */
-export interface SendCommandRequest {
-    /**
-     * <p>The IDs of the managed nodes where the command should run. Specifying managed node IDs is
-     *    most useful when you are targeting a limited number of managed nodes, though you can specify up
-     *    to 50 IDs.</p>
-     *          <p>To target a larger number of managed nodes, or if you prefer not to list individual node
-     *    IDs, we recommend using the <code>Targets</code> option instead. Using <code>Targets</code>,
-     *    which accepts tag key-value pairs to identify the managed nodes to send commands to, you can a
-     *    send command to tens, hundreds, or thousands of nodes at once.</p>
-     *          <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Run commands at scale</a>
-     *    in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    InstanceIds?: string[] | undefined;
-    /**
-     * <p>An array of search criteria that targets managed nodes using a <code>Key,Value</code>
-     *    combination that you specify. Specifying targets is most useful when you want to send a command
-     *    to a large number of managed nodes at once. Using <code>Targets</code>, which accepts tag
-     *    key-value pairs to identify managed nodes, you can send a command to tens, hundreds, or thousands
-     *    of nodes at once.</p>
-     *          <p>To send a command to a smaller number of managed nodes, you can use the
-     *     <code>InstanceIds</code> option instead.</p>
-     *          <p>For more information about how to use targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html">Run commands at scale</a>
-     *    in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>The name of the Amazon Web Services Systems Manager document (SSM document) to run. This can be a public document or a
-     *    custom document. To run a shared document belonging to another account, specify the document
-     *    Amazon Resource Name (ARN). For more information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/ssm-using-shared.html">Sharing SSM
-     *     documents</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     *          <note>
-     *             <p>If you specify a document name or ARN that hasn't been shared with your account, you
-     *     receive an <code>InvalidDocument</code> error. </p>
-     *          </note>
-     * @public
-     */
-    DocumentName: string | undefined;
-    /**
-     * <p>The SSM document version to use in the request. You can specify $DEFAULT, $LATEST, or a
-     *    specific version number. If you run commands by using the Command Line Interface (Amazon Web Services CLI), then
-     *    you must escape the first two options by using a backslash. If you specify a version number, then
-     *    you don't need to use the backslash. For example:</p>
-     *          <p>--document-version "\$DEFAULT"</p>
-     *          <p>--document-version "\$LATEST"</p>
-     *          <p>--document-version "3"</p>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>The Sha256 or Sha1 hash created by the system when the document was created. </p>
-     *          <note>
-     *             <p>Sha1 hashes have been deprecated.</p>
-     *          </note>
-     * @public
-     */
-    DocumentHash?: string | undefined;
-    /**
-     * <p>Sha256 or Sha1.</p>
-     *          <note>
-     *             <p>Sha1 hashes have been deprecated.</p>
-     *          </note>
-     * @public
-     */
-    DocumentHashType?: DocumentHashType | undefined;
-    /**
-     * <p>If this time is reached and the command hasn't already started running, it won't run.</p>
-     * @public
-     */
-    TimeoutSeconds?: number | undefined;
-    /**
-     * <p>User-specified information about the command, such as a brief description of what the
-     *    command should do.</p>
-     * @public
-     */
-    Comment?: string | undefined;
-    /**
-     * <p>The required and optional parameters specified in the document being run.</p>
-     * @public
-     */
-    Parameters?: Record<string, string[]> | undefined;
-    /**
-     * <p>(Deprecated) You can no longer specify this parameter. The system ignores it. Instead, Systems Manager
-     *    automatically determines the Amazon Web Services Region of the S3 bucket.</p>
-     * @public
-     */
-    OutputS3Region?: string | undefined;
-    /**
-     * <p>The name of the S3 bucket where command execution responses should be stored.</p>
-     * @public
-     */
-    OutputS3BucketName?: string | undefined;
-    /**
-     * <p>The directory structure within the S3 bucket where the responses should be stored.</p>
-     * @public
-     */
-    OutputS3KeyPrefix?: string | undefined;
-    /**
-     * <p>(Optional) The maximum number of managed nodes that are allowed to run the command at the
-     *    same time. You can specify a number such as 10 or a percentage such as 10%. The default value is
-     *     <code>50</code>. For more information about how to use <code>MaxConcurrency</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-velocity">Using
-     *     concurrency controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    MaxConcurrency?: string | undefined;
-    /**
-     * <p>The maximum number of errors allowed without the command failing. When the command fails one
-     *    more time beyond the value of <code>MaxErrors</code>, the systems stops sending the command to
-     *    additional targets. You can specify a number like 10 or a percentage like 10%. The default value
-     *    is <code>0</code>. For more information about how to use <code>MaxErrors</code>, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/send-commands-multiple.html#send-commands-maxerrors">Using
-     *     error controls</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    MaxErrors?: string | undefined;
-    /**
-     * <p>The ARN of the Identity and Access Management (IAM) service role to use to publish
-     *     Amazon Simple Notification Service (Amazon SNS) notifications for Run Command commands.</p>
-     *          <p>This role must provide the <code>sns:Publish</code> permission for your notification topic.
-     *    For information about creating and using this service role, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/monitoring-sns-notifications.html">Monitoring Systems Manager status changes using Amazon SNS notifications</a> in the
-     *     <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    ServiceRoleArn?: string | undefined;
-    /**
-     * <p>Configurations for sending notifications.</p>
-     * @public
-     */
-    NotificationConfig?: NotificationConfig | undefined;
-    /**
-     * <p>Enables Amazon Web Services Systems Manager to send Run Command output to Amazon CloudWatch Logs. Run Command is a
-     *    tool in Amazon Web Services Systems Manager.</p>
-     * @public
-     */
-    CloudWatchOutputConfig?: CloudWatchOutputConfig | undefined;
-    /**
-     * <p>The CloudWatch alarm you want to apply to your command.</p>
-     * @public
-     */
-    AlarmConfiguration?: AlarmConfiguration | undefined;
-}
-/**
- * @public
- */
-export interface SendCommandResult {
-    /**
-     * <p>The request as it was received by Systems Manager. Also provides the command ID which can be used
-     *    future references to this request.</p>
-     * @public
-     */
-    Command?: Command | undefined;
-}
-/**
- * <p>The request exceeds the service quota. Service quotas, also referred to as limits, are the
- *    maximum number of service resources or operations for your Amazon Web Services account.</p>
- * @public
- */
-export declare class ServiceQuotaExceededException extends __BaseException {
-    readonly name: "ServiceQuotaExceededException";
-    readonly $fault: "client";
-    Message: string | undefined;
-    /**
-     * <p>The unique ID of the resource referenced in the failed request.</p>
-     * @public
-     */
-    ResourceId?: string | undefined;
-    /**
-     * <p>The resource type of the resource referenced in the failed request.</p>
-     * @public
-     */
-    ResourceType?: string | undefined;
-    /**
-     * <p>The quota code recognized by the Amazon Web Services Service Quotas service.</p>
-     * @public
-     */
-    QuotaCode: string | undefined;
-    /**
-     * <p>The code for the Amazon Web Services service that owns the quota.</p>
-     * @public
-     */
-    ServiceCode: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<ServiceQuotaExceededException, __BaseException>);
-}
-/**
- * @public
- */
-export interface StartAccessRequestRequest {
-    /**
-     * <p>A brief description explaining why you are requesting access to the node.</p>
-     * @public
-     */
-    Reason: string | undefined;
-    /**
-     * <p>The node you are requesting access to.</p>
-     * @public
-     */
-    Targets: Target[] | undefined;
-    /**
-     * <p>Key-value pairs of metadata you want to assign to the access request.</p>
-     * @public
-     */
-    Tags?: Tag[] | undefined;
-}
-/**
- * @public
- */
-export interface StartAccessRequestResponse {
-    /**
-     * <p>The ID of the access request.</p>
-     * @public
-     */
-    AccessRequestId?: string | undefined;
-}
-/**
- * <p>The association isn't valid or doesn't exist. </p>
- * @public
- */
-export declare class InvalidAssociation extends __BaseException {
-    readonly name: "InvalidAssociation";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidAssociation, __BaseException>);
-}
-/**
- * @public
- */
-export interface StartAssociationsOnceRequest {
-    /**
-     * <p>The association IDs that you want to run immediately and only one time.</p>
-     * @public
-     */
-    AssociationIds: string[] | undefined;
-}
-/**
- * @public
- */
-export interface StartAssociationsOnceResult {
-}
-/**
- * <p>An Automation runbook with the specified name couldn't be found.</p>
- * @public
- */
-export declare class AutomationDefinitionNotFoundException extends __BaseException {
-    readonly name: "AutomationDefinitionNotFoundException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<AutomationDefinitionNotFoundException, __BaseException>);
-}
-/**
- * <p>An Automation runbook with the specified name and version couldn't be found.</p>
- * @public
- */
-export declare class AutomationDefinitionVersionNotFoundException extends __BaseException {
-    readonly name: "AutomationDefinitionVersionNotFoundException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<AutomationDefinitionVersionNotFoundException, __BaseException>);
-}
-/**
- * <p>The number of simultaneously running Automation executions exceeded the allowable
- *    limit.</p>
- * @public
- */
-export declare class AutomationExecutionLimitExceededException extends __BaseException {
-    readonly name: "AutomationExecutionLimitExceededException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<AutomationExecutionLimitExceededException, __BaseException>);
-}
-/**
- * <p>The supplied parameters for invoking the specified Automation runbook are incorrect. For
- *    example, they may not match the set of parameters permitted for the specified Automation
- *    document.</p>
- * @public
- */
-export declare class InvalidAutomationExecutionParametersException extends __BaseException {
-    readonly name: "InvalidAutomationExecutionParametersException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidAutomationExecutionParametersException, __BaseException>);
-}
-/**
- * @public
- */
-export interface StartAutomationExecutionRequest {
-    /**
-     * <p>The name of the SSM document to run. This can be a public document or a custom document. To
-     *    run a shared document belonging to another account, specify the document ARN. For more
-     *    information about how to use shared documents, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/documents-ssm-sharing.html">Sharing SSM documents</a>
-     *    in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    DocumentName: string | undefined;
-    /**
-     * <p>The version of the Automation runbook to use for this execution.</p>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>A key-value map of execution parameters, which match the declared parameters in the
-     *    Automation runbook.</p>
-     * @public
-     */
-    Parameters?: Record<string, string[]> | undefined;
-    /**
-     * <p>User-provided idempotency token. The token must be unique, is case insensitive, enforces the
-     *    UUID format, and can't be reused.</p>
-     * @public
-     */
-    ClientToken?: string | undefined;
-    /**
-     * <p>The execution mode of the automation. Valid modes include the following: Auto and
-     *    Interactive. The default mode is Auto.</p>
-     * @public
-     */
-    Mode?: ExecutionMode | undefined;
-    /**
-     * <p>The name of the parameter used as the target resource for the rate-controlled execution.
-     *    Required if you specify targets.</p>
-     * @public
-     */
-    TargetParameterName?: string | undefined;
-    /**
-     * <p>A key-value mapping to target resources. Required if you specify TargetParameterName.</p>
-     *          <p>If both this parameter and the <code>TargetLocation:Targets</code> parameter are supplied,
-     *     <code>TargetLocation:Targets</code> takes precedence.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps
-     *    can't be specified together.</p>
-     * @public
-     */
-    TargetMaps?: Record<string, string[]>[] | undefined;
-    /**
-     * <p>The maximum number of targets allowed to run this task in parallel. You can specify a
-     *    number, such as 10, or a percentage, such as 10%. The default value is <code>10</code>.</p>
-     *          <p>If both this parameter and the <code>TargetLocation:TargetsMaxConcurrency</code> are
-     *    supplied, <code>TargetLocation:TargetsMaxConcurrency</code> takes precedence.</p>
-     * @public
-     */
-    MaxConcurrency?: string | undefined;
-    /**
-     * <p>The number of errors that are allowed before the system stops running the automation on
-     *    additional targets. You can specify either an absolute number of errors, for example 10, or a
-     *    percentage of the target set, for example 10%. If you specify 3, for example, the system stops
-     *    running the automation when the fourth error is received. If you specify 0, then the system stops
-     *    running the automation on additional targets after the first error result is returned. If you run
-     *    an automation on 50 resources and set max-errors to 10%, then the system stops running the
-     *    automation on additional targets when the sixth error is received.</p>
-     *          <p>Executions that are already running an automation when max-errors is reached are allowed to
-     *    complete, but some of these executions may fail as well. If you need to ensure that there won't
-     *    be more than max-errors failed executions, set max-concurrency to 1 so the executions proceed one
-     *    at a time.</p>
-     *          <p>If this parameter and the <code>TargetLocation:TargetsMaxErrors</code> parameter are both
-     *    supplied, <code>TargetLocation:TargetsMaxErrors</code> takes precedence.</p>
-     * @public
-     */
-    MaxErrors?: string | undefined;
-    /**
-     * <p>A location is a combination of Amazon Web Services Regions and/or Amazon Web Services accounts where you want to run the
-     *    automation. Use this operation to start an automation in multiple Amazon Web Services Regions and multiple
-     *    Amazon Web Services accounts. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-automation-multiple-accounts-and-regions.html">Running automations in multiple Amazon Web Services Regions and accounts</a> in the
-     *     <i>Amazon Web Services Systems Manager User Guide</i>. </p>
-     * @public
-     */
-    TargetLocations?: TargetLocation[] | undefined;
-    /**
-     * <p>Optional metadata that you assign to a resource. You can specify a maximum of five tags for
-     *    an automation. Tags enable you to categorize a resource in different ways, such as by purpose,
-     *    owner, or environment. For example, you might want to tag an automation to identify an
-     *    environment or operating system. In this case, you could specify the following key-value
-     *    pairs:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Key=environment,Value=test</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Key=OS,Value=Windows</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     *          <note>
-     *             <p>The <code>Array Members</code> maximum value is reported as 1000. This number includes
-     *     capacity reserved for internal operations. When calling the
-     *      <code>StartAutomationExecution</code> action, you can specify a maximum of 5 tags. You can,
-     *     however, use the <a>AddTagsToResource</a> action to add up to a total of 50 tags to
-     *     an existing automation configuration.</p>
-     *          </note>
-     * @public
-     */
-    Tags?: Tag[] | undefined;
-    /**
-     * <p>The CloudWatch alarm you want to apply to your automation.</p>
-     * @public
-     */
-    AlarmConfiguration?: AlarmConfiguration | undefined;
-    /**
-     * <p>Specify a publicly accessible URL for a file that contains the <code>TargetLocations</code>
-     *    body. Currently, only files in presigned Amazon S3 buckets are supported. </p>
-     * @public
-     */
-    TargetLocationsURL?: string | undefined;
-}
-/**
- * @public
- */
-export interface StartAutomationExecutionResult {
-    /**
-     * <p>The unique ID of a newly scheduled automation execution.</p>
-     * @public
-     */
-    AutomationExecutionId?: string | undefined;
-}
-/**
- * <p>Indicates that the Change Manager change template used in the change request was rejected or is
- *    still in a pending state.</p>
- * @public
- */
-export declare class AutomationDefinitionNotApprovedException extends __BaseException {
-    readonly name: "AutomationDefinitionNotApprovedException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<AutomationDefinitionNotApprovedException, __BaseException>);
-}
-/**
- * @public
- */
-export interface StartChangeRequestExecutionRequest {
-    /**
-     * <p>The date and time specified in the change request to run the Automation runbooks.</p>
-     *          <note>
-     *             <p>The Automation runbooks specified for the runbook workflow can't run until all required
-     *     approvals for the change request have been received.</p>
-     *          </note>
-     * @public
-     */
-    ScheduledTime?: Date | undefined;
-    /**
-     * <p>The name of the change template document to run during the runbook workflow.</p>
-     * @public
-     */
-    DocumentName: string | undefined;
-    /**
-     * <p>The version of the change template document to run during the runbook workflow.</p>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>A key-value map of parameters that match the declared parameters in the change template
-     *    document.</p>
-     * @public
-     */
-    Parameters?: Record<string, string[]> | undefined;
-    /**
-     * <p>The name of the change request associated with the runbook workflow to be run.</p>
-     * @public
-     */
-    ChangeRequestName?: string | undefined;
-    /**
-     * <p>The user-provided idempotency token. The token must be unique, is case insensitive, enforces
-     *    the UUID format, and can't be reused.</p>
-     * @public
-     */
-    ClientToken?: string | undefined;
-    /**
-     * <p>Indicates whether the change request can be approved automatically without the need for
-     *    manual approvals.</p>
-     *          <p>If <code>AutoApprovable</code> is enabled in a change template, then setting
-     *     <code>AutoApprove</code> to <code>true</code> in <code>StartChangeRequestExecution</code>
-     *    creates a change request that bypasses approver review.</p>
-     *          <note>
-     *             <p>Change Calendar restrictions are not bypassed in this scenario. If the state of an
-     *     associated calendar is <code>CLOSED</code>, change freeze approvers must still grant permission
-     *     for this change request to run. If they don't, the change won't be processed until the calendar
-     *     state is again <code>OPEN</code>. </p>
-     *          </note>
-     * @public
-     */
-    AutoApprove?: boolean | undefined;
-    /**
-     * <p>Information about the Automation runbooks that are run during the runbook workflow.</p>
-     *          <note>
-     *             <p>The Automation runbooks specified for the runbook workflow can't run until all required
-     *     approvals for the change request have been received.</p>
-     *          </note>
-     * @public
-     */
-    Runbooks: Runbook[] | undefined;
-    /**
-     * <p>Optional metadata that you assign to a resource. You can specify a maximum of five tags for
-     *    a change request. Tags enable you to categorize a resource in different ways, such as by
-     *    purpose, owner, or environment. For example, you might want to tag a change request to identify
-     *    an environment or target Amazon Web Services Region. In this case, you could specify the following key-value
-     *    pairs:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Key=Environment,Value=Production</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Key=Region,Value=us-east-2</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     *          <note>
-     *             <p>The <code>Array Members</code> maximum value is reported as 1000. This number includes
-     *     capacity reserved for internal operations. When calling the
-     *      <code>StartChangeRequestExecution</code> action, you can specify a maximum of 5 tags. You can,
-     *     however, use the <a>AddTagsToResource</a> action to add up to a total of 50 tags to
-     *     an existing change request configuration.</p>
-     *          </note>
-     * @public
-     */
-    Tags?: Tag[] | undefined;
-    /**
-     * <p>The time that the requester expects the runbook workflow related to the change request to
-     *    complete. The time is an estimate only that the requester provides for reviewers.</p>
-     * @public
-     */
-    ScheduledEndTime?: Date | undefined;
-    /**
-     * <p>User-provided details about the change. If no details are provided, content specified in the
-     *     <b>Template information</b> section of the associated change template
-     *    is added.</p>
-     * @public
-     */
-    ChangeDetails?: string | undefined;
-}
-/**
- * @public
- */
-export interface StartChangeRequestExecutionResult {
-    /**
-     * <p>The unique ID of a runbook workflow operation. (A runbook workflow is a type of Automation
-     *    operation.) </p>
-     * @public
-     */
-    AutomationExecutionId?: string | undefined;
-}
-/**
- * <p>Information about the optional inputs that can be specified for an automation execution
- *    preview.</p>
- * @public
- */
-export interface AutomationExecutionInputs {
-    /**
-     * <p>Information about parameters that can be specified for the preview operation.
-     *    </p>
-     * @public
-     */
-    Parameters?: Record<string, string[]> | undefined;
-    /**
-     * <p>The name of the parameter used as the target resource for the rate-controlled execution.
-     *    Required if you specify targets.</p>
-     * @public
-     */
-    TargetParameterName?: string | undefined;
-    /**
-     * <p>Information about the resources that would be included in the actual runbook execution, if
-     *    it were to be run. Both Targets and TargetMaps can't be specified together.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps
-     *    can't be specified together.</p>
-     * @public
-     */
-    TargetMaps?: Record<string, string[]>[] | undefined;
-    /**
-     * <p>Information about the Amazon Web Services Regions and Amazon Web Services accounts targeted by the Automation execution
-     *    preview operation.</p>
-     * @public
-     */
-    TargetLocations?: TargetLocation[] | undefined;
-    /**
-     * <p>A publicly accessible URL for a file that contains the <code>TargetLocations</code> body.
-     *    Currently, only files in presigned Amazon S3 buckets are supported.</p>
-     * @public
-     */
-    TargetLocationsURL?: string | undefined;
-}
-/**
- * <p>Information about the inputs for an execution preview.</p>
- * @public
- */
-export type ExecutionInputs = ExecutionInputs.AutomationMember | ExecutionInputs.$UnknownMember;
-/**
- * @public
- */
-export declare namespace ExecutionInputs {
-    /**
-     * <p>Information about the optional inputs that can be specified for an automation execution
-     *    preview.</p>
-     * @public
-     */
-    interface AutomationMember {
-        Automation: AutomationExecutionInputs;
-        $unknown?: never;
-    }
-    /**
-     * @public
-     */
-    interface $UnknownMember {
-        Automation?: never;
-        $unknown: [string, any];
-    }
-    interface Visitor<T> {
-        Automation: (value: AutomationExecutionInputs) => T;
-        _: (name: string, value: any) => T;
-    }
-    const visit: <T>(value: ExecutionInputs, visitor: Visitor<T>) => T;
-}
-/**
- * @public
- */
-export interface StartExecutionPreviewRequest {
-    /**
-     * <p>The name of the Automation runbook to run. The result of the execution preview indicates
-     *    what the impact would be of running this runbook.</p>
-     * @public
-     */
-    DocumentName: string | undefined;
-    /**
-     * <p>The version of the Automation runbook to run. The default value is
-     *    <code>$DEFAULT</code>.</p>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>Information about the inputs that can be specified for the preview operation.
-     *    </p>
-     * @public
-     */
-    ExecutionInputs?: ExecutionInputs | undefined;
-}
-/**
- * @public
- */
-export interface StartExecutionPreviewResponse {
-    /**
-     * <p>The ID of the execution preview generated by the system.</p>
-     * @public
-     */
-    ExecutionPreviewId?: string | undefined;
-}
-/**
- * @public
- */
-export interface StartSessionRequest {
-    /**
-     * <p>The managed node to connect to for the session.</p>
-     * @public
-     */
-    Target: string | undefined;
-    /**
-     * <p>The name of the SSM document you want to use to define the type of session, input
-     *    parameters, or preferences for the session. For example, <code>SSM-SessionManagerRunShell</code>.
-     *    You can call the <a>GetDocument</a> API to verify the document exists before
-     *    attempting to start a session. If no document name is provided, a shell to the managed node is
-     *    launched by default. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/session-manager-working-with-sessions-start.html">Start a
-     *     session</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    DocumentName?: string | undefined;
-    /**
-     * <p>The reason for connecting to the instance. This value is included in the details for the
-     *     Amazon CloudWatch Events event created when you start the session.</p>
-     * @public
-     */
-    Reason?: string | undefined;
-    /**
-     * <p>The values you want to specify for the parameters defined in the Session document.
-     *    For more information about these parameters, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/getting-started-create-preferences-cli.html">Create a
-     *     Session Manager preferences document</a> in the
-     *    <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    Parameters?: Record<string, string[]> | undefined;
-}
-/**
- * @public
- */
-export interface StartSessionResponse {
-    /**
-     * <p>The ID of the session.</p>
-     * @public
-     */
-    SessionId?: string | undefined;
-    /**
-     * <p>An encrypted token value containing session and caller information. This token is used to
-     *    authenticate the connection to the managed node, and is valid only long enough to ensure the
-     *    connection is successful. Never share your session's token.</p>
-     * @public
-     */
-    TokenValue?: string | undefined;
-    /**
-     * <p>A URL back to SSM Agent on the managed node that the Session Manager client uses to send commands and
-     *    receive output from the node. Format: <code>wss://ssmmessages.<b>region</b>.amazonaws.com/v1/data-channel/<b>session-id</b>?stream=(input|output)</code>
-     *          </p>
-     *          <p>
-     *             <b>region</b> represents the Region identifier for an
-     * 						Amazon Web Services Region supported by Amazon Web Services Systems Manager, such as <code>us-east-2</code> for the US East (Ohio) Region.
-     * 						For a list of supported <b>region</b> values, see the <b>Region</b> column in <a href="https://docs.aws.amazon.com/general/latest/gr/ssm.html#ssm_region">Systems Manager service endpoints</a> in the
-     *         <i>Amazon Web Services General Reference</i>.</p>
-     *          <p>
-     *             <b>session-id</b> represents the ID of a Session Manager session, such as
-     *     <code>1a2b3c4dEXAMPLE</code>.</p>
-     * @public
-     */
-    StreamUrl?: string | undefined;
-}
-/**
- * <p>The specified target managed node for the session isn't fully configured for use with Session Manager.
- *    For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/session-manager-getting-started.html">Setting up
- *     Session Manager</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. This error is also returned if you
- *    attempt to start a session on a managed node that is located in a different account or
- *    Region</p>
- * @public
- */
-export declare class TargetNotConnected extends __BaseException {
-    readonly name: "TargetNotConnected";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<TargetNotConnected, __BaseException>);
-}
-/**
- * <p>The specified update status operation isn't valid.</p>
- * @public
- */
-export declare class InvalidAutomationStatusUpdateException extends __BaseException {
-    readonly name: "InvalidAutomationStatusUpdateException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidAutomationStatusUpdateException, __BaseException>);
-}
-/**
- * @public
- * @enum
- */
-export declare const StopType: {
-    readonly CANCEL: "Cancel";
-    readonly COMPLETE: "Complete";
-};
-/**
- * @public
- */
-export type StopType = (typeof StopType)[keyof typeof StopType];
-/**
- * @public
- */
-export interface StopAutomationExecutionRequest {
-    /**
-     * <p>The execution ID of the Automation to stop.</p>
-     * @public
-     */
-    AutomationExecutionId: string | undefined;
-    /**
-     * <p>The stop request type. Valid types include the following: Cancel and Complete. The default
-     *    type is Cancel.</p>
-     * @public
-     */
-    Type?: StopType | undefined;
-}
-/**
- * @public
- */
-export interface StopAutomationExecutionResult {
-}
-/**
- * @public
- */
-export interface TerminateSessionRequest {
-    /**
-     * <p>The ID of the session to terminate.</p>
-     * @public
-     */
-    SessionId: string | undefined;
-}
-/**
- * @public
- */
-export interface TerminateSessionResponse {
-    /**
-     * <p>The ID of the session that has been terminated.</p>
-     * @public
-     */
-    SessionId?: string | undefined;
-}
-/**
- * @public
- */
-export interface UnlabelParameterVersionRequest {
-    /**
-     * <p>The name of the parameter from which you want to delete one or more labels.</p>
-     *          <note>
-     *             <p>You can't enter the Amazon Resource Name (ARN) for a parameter, only the parameter name
-     *     itself.</p>
-     *          </note>
-     * @public
-     */
-    Name: string | undefined;
-    /**
-     * <p>The specific version of the parameter which you want to delete one or more labels from. If
-     *    it isn't present, the call will fail.</p>
-     * @public
-     */
-    ParameterVersion: number | undefined;
-    /**
-     * <p>One or more labels to delete from the specified parameter version.</p>
-     * @public
-     */
-    Labels: string[] | undefined;
-}
-/**
- * @public
- */
-export interface UnlabelParameterVersionResult {
-    /**
-     * <p>A list of all labels deleted from the parameter.</p>
-     * @public
-     */
-    RemovedLabels?: string[] | undefined;
-    /**
-     * <p>The labels that aren't attached to the given parameter version.</p>
-     * @public
-     */
-    InvalidLabels?: string[] | undefined;
-}
-/**
- * <p>You have reached the maximum number versions allowed for an association. Each association
- *    has a limit of 1,000 versions. </p>
- * @public
- */
-export declare class AssociationVersionLimitExceeded extends __BaseException {
-    readonly name: "AssociationVersionLimitExceeded";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<AssociationVersionLimitExceeded, __BaseException>);
-}
-/**
- * <p>The update isn't valid.</p>
- * @public
- */
-export declare class InvalidUpdate extends __BaseException {
-    readonly name: "InvalidUpdate";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<InvalidUpdate, __BaseException>);
-}
-/**
- * @public
- */
-export interface UpdateAssociationRequest {
-    /**
-     * <p>The ID of the association you want to update. </p>
-     * @public
-     */
-    AssociationId: string | undefined;
-    /**
-     * <p>The parameters you want to update for the association. If you create a parameter using
-     *    Parameter Store, a tool in Amazon Web Services Systems Manager, you can reference the parameter using
-     *     <code>\{\{ssm:parameter-name\}\}</code>.</p>
-     * @public
-     */
-    Parameters?: Record<string, string[]> | undefined;
-    /**
-     * <p>The document version you want update for the association. </p>
-     *          <important>
-     *             <p>State Manager doesn't support running associations that use a new version of a document if
-     *     that document is shared from another account. State Manager always runs the <code>default</code>
-     *     version of a document if shared from another account, even though the Systems Manager console shows that a
-     *     new version was processed. If you want to run an association using a new version of a document
-     *     shared form another account, you must set the document version to <code>default</code>.</p>
-     *          </important>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>The cron expression used to schedule the association that you want to update.</p>
-     * @public
-     */
-    ScheduleExpression?: string | undefined;
-    /**
-     * <p>An S3 bucket where you want to store the results of this request.</p>
-     * @public
-     */
-    OutputLocation?: InstanceAssociationOutputLocation | undefined;
-    /**
-     * <p>The name of the SSM Command document or Automation runbook that contains the configuration
-     *    information for the managed node.</p>
-     *          <p>You can specify Amazon Web Services-predefined documents, documents you created, or a document that is
-     *    shared with you from another account.</p>
-     *          <p>For Systems Manager document (SSM document) that are shared with you from other Amazon Web Services accounts, you
-     *    must specify the complete SSM document ARN, in the following format:</p>
-     *          <p>
-     *             <code>arn:aws:ssm:<i>region</i>:<i>account-id</i>:document/<i>document-name</i>
-     *             </code>
-     *          </p>
-     *          <p>For example:</p>
-     *          <p>
-     *             <code>arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document</code>
-     *          </p>
-     *          <p>For Amazon Web Services-predefined documents and SSM documents you created in your account, you only need
-     *    to specify the document name. For example, <code>AWS-ApplyPatchBaseline</code> or
-     *     <code>My-Document</code>.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>The targets of the association.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>The name of the association that you want to update.</p>
-     * @public
-     */
-    AssociationName?: string | undefined;
-    /**
-     * <p>This parameter is provided for concurrency control purposes. You must specify the latest
-     *    association version in the service. If you want to ensure that this request succeeds, either
-     *    specify <code>$LATEST</code>, or omit this parameter.</p>
-     * @public
-     */
-    AssociationVersion?: string | undefined;
-    /**
-     * <p>Choose the parameter that will define how your automation will branch out. This target is
-     *    required for associations that use an Automation runbook and target resources by using rate
-     *    controls. Automation is a tool in Amazon Web Services Systems Manager.</p>
-     * @public
-     */
-    AutomationTargetParameterName?: string | undefined;
-    /**
-     * <p>The number of errors that are allowed before the system stops sending requests to run the
-     *    association on additional targets. You can specify either an absolute number of errors, for
-     *    example 10, or a percentage of the target set, for example 10%. If you specify 3, for example,
-     *    the system stops sending requests when the fourth error is received. If you specify 0, then the
-     *    system stops sending requests after the first error is returned. If you run an association on 50
-     *    managed nodes and set <code>MaxError</code> to 10%, then the system stops sending the request
-     *    when the sixth error is received.</p>
-     *          <p>Executions that are already running an association when <code>MaxErrors</code> is reached
-     *    are allowed to complete, but some of these executions may fail as well. If you need to ensure
-     *    that there won't be more than max-errors failed executions, set <code>MaxConcurrency</code> to 1
-     *    so that executions proceed one at a time.</p>
-     * @public
-     */
-    MaxErrors?: string | undefined;
-    /**
-     * <p>The maximum number of targets allowed to run the association at the same time. You can
-     *    specify a number, for example 10, or a percentage of the target set, for example 10%. The default
-     *    value is 100%, which means all targets run the association at the same time.</p>
-     *          <p>If a new managed node starts and attempts to run an association while Systems Manager is running
-     *     <code>MaxConcurrency</code> associations, the association is allowed to run. During the next
-     *    association interval, the new managed node will process its association within the limit
-     *    specified for <code>MaxConcurrency</code>.</p>
-     * @public
-     */
-    MaxConcurrency?: string | undefined;
-    /**
-     * <p>The severity level to assign to the association.</p>
-     * @public
-     */
-    ComplianceSeverity?: AssociationComplianceSeverity | undefined;
-    /**
-     * <p>The mode for generating association compliance. You can specify <code>AUTO</code> or
-     *     <code>MANUAL</code>. In <code>AUTO</code> mode, the system uses the status of the association
-     *    execution to determine the compliance status. If the association execution runs successfully,
-     *    then the association is <code>COMPLIANT</code>. If the association execution doesn't run
-     *    successfully, the association is <code>NON-COMPLIANT</code>.</p>
-     *          <p>In <code>MANUAL</code> mode, you must specify the <code>AssociationId</code> as a parameter
-     *    for the <a>PutComplianceItems</a> API operation. In this case, compliance data isn't
-     *    managed by State Manager, a tool in Amazon Web Services Systems Manager. It is managed by your direct call to the <a>PutComplianceItems</a> API operation.</p>
-     *          <p>By default, all associations use <code>AUTO</code> mode.</p>
-     * @public
-     */
-    SyncCompliance?: AssociationSyncCompliance | undefined;
-    /**
-     * <p>By default, when you update an association, the system runs it immediately after it is
-     *    updated and then according to the schedule you specified. Specify <code>true</code> for
-     *     <code>ApplyOnlyAtCronInterval</code> if you want the association to run only according to the
-     *    schedule you specified.</p>
-     *          <p>If you chose this option when you created an association and later you edit that association
-     *    or you make changes to the Automation runbook or SSM document on which that association is based,
-     *    State Manager applies the association at the next specified cron interval. For example, if you
-     *    chose the <code>Latest</code> version of an SSM document when you created an association and you
-     *    edit the association by choosing a different document version on the Documents page, State
-     *    Manager applies the association at the next specified cron interval if you previously set
-     *     <code>ApplyOnlyAtCronInterval</code> to <code>true</code>. If this option wasn't selected, State
-     *    Manager immediately runs the association.</p>
-     *          <p>For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#state-manager-about-scheduling">Understanding when associations are applied to resources</a> and <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/state-manager-about.html#runbook-target-updates">About
-     *     target updates with Automation runbooks</a> in the
-     *    <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     *          <p>This parameter isn't supported for rate expressions.</p>
-     *          <p>You can reset this parameter. To do so, specify the
-     *     <code>no-apply-only-at-cron-interval</code> parameter when you update the association from the
-     *    command line. This parameter forces the association to run immediately after updating it and
-     *    according to the interval specified.</p>
-     * @public
-     */
-    ApplyOnlyAtCronInterval?: boolean | undefined;
-    /**
-     * <p>The names or Amazon Resource Names (ARNs) of the Change Calendar type documents you want to
-     *    gate your associations under. The associations only run when that change calendar is open. For
-     *    more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/systems-manager-change-calendar">Amazon Web Services Systems Manager Change
-     *     Calendar</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    CalendarNames?: string[] | undefined;
-    /**
-     * <p>A location is a combination of Amazon Web Services Regions and Amazon Web Services accounts where you want to run the
-     *    association. Use this action to update an association in multiple Regions and multiple
-     *    accounts.</p>
-     * @public
-     */
-    TargetLocations?: TargetLocation[] | undefined;
-    /**
-     * <p>Number of days to wait after the scheduled day to run an association. For example, if you
-     *    specified a cron schedule of <code>cron(0 0 ? * THU#2 *)</code>, you could specify an offset of 3
-     *    to run the association each Sunday after the second Thursday of the month. For more information
-     *    about cron schedules for associations, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/reference-cron-and-rate-expressions.html">Reference: Cron
-     *     and rate expressions for Systems Manager</a> in the <i>Amazon Web Services Systems Manager User Guide</i>. </p>
-     *          <note>
-     *             <p>To use offsets, you must specify the <code>ApplyOnlyAtCronInterval</code> parameter. This
-     *     option tells the system not to run an association immediately after you create it. </p>
-     *          </note>
-     * @public
-     */
-    ScheduleOffset?: number | undefined;
-    /**
-     * <p>The number of hours the association can run before it is canceled. Duration applies to
-     *    associations that are currently running, and any pending and in progress commands on all targets.
-     *    If a target was taken offline for the association to run, it is made available again immediately,
-     *    without a reboot. </p>
-     *          <p>The <code>Duration</code> parameter applies only when both these conditions are true:</p>
-     *          <ul>
-     *             <li>
-     *                <p>The association for which you specify a duration is cancelable according to the parameters
-     *      of the SSM command document or Automation runbook associated with this execution. </p>
-     *             </li>
-     *             <li>
-     *                <p>The command specifies the <code>
-     *                      <a href="https://docs.aws.amazon.com/systems-manager/latest/APIReference/API_UpdateAssociation.html#systemsmanager-UpdateAssociation-request-ApplyOnlyAtCronInterval">ApplyOnlyAtCronInterval</a>
-     *                   </code> parameter, which means that the association doesn't
-     *      run immediately after it is updated, but only according to the specified schedule.</p>
-     *             </li>
-     *          </ul>
-     * @public
-     */
-    Duration?: number | undefined;
-    /**
-     * <p>A key-value mapping of document parameters to target resources. Both Targets and TargetMaps
-     *    can't be specified together.</p>
-     * @public
-     */
-    TargetMaps?: Record<string, string[]>[] | undefined;
-    /**
-     * <p>The details for the CloudWatch alarm you want to apply to an automation or
-     *    command.</p>
-     * @public
-     */
-    AlarmConfiguration?: AlarmConfiguration | undefined;
-}
-/**
- * @public
- */
-export interface UpdateAssociationResult {
-    /**
-     * <p>The description of the association that was updated.</p>
-     * @public
-     */
-    AssociationDescription?: AssociationDescription | undefined;
-}
-/**
- * <p>The updated status is the same as the current status.</p>
- * @public
- */
-export declare class StatusUnchanged extends __BaseException {
-    readonly name: "StatusUnchanged";
-    readonly $fault: "client";
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<StatusUnchanged, __BaseException>);
-}
-/**
- * @public
- */
-export interface UpdateAssociationStatusRequest {
-    /**
-     * <p>The name of the SSM document.</p>
-     * @public
-     */
-    Name: string | undefined;
-    /**
-     * <p>The managed node ID.</p>
-     * @public
-     */
-    InstanceId: string | undefined;
-    /**
-     * <p>The association status.</p>
-     * @public
-     */
-    AssociationStatus: AssociationStatus | undefined;
-}
-/**
- * @public
- */
-export interface UpdateAssociationStatusResult {
-    /**
-     * <p>Information about the association.</p>
-     * @public
-     */
-    AssociationDescription?: AssociationDescription | undefined;
-}
-/**
- * <p>The document has too many versions. Delete one or more document versions and try
- *    again.</p>
- * @public
- */
-export declare class DocumentVersionLimitExceeded extends __BaseException {
-    readonly name: "DocumentVersionLimitExceeded";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<DocumentVersionLimitExceeded, __BaseException>);
-}
-/**
- * <p>The content of the association document matches another document. Change the content of the
- *    document and try again.</p>
- * @public
- */
-export declare class DuplicateDocumentContent extends __BaseException {
-    readonly name: "DuplicateDocumentContent";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<DuplicateDocumentContent, __BaseException>);
-}
-/**
- * <p>The version name has already been used in this document. Specify a different version name,
- *    and then try again.</p>
- * @public
- */
-export declare class DuplicateDocumentVersionName extends __BaseException {
-    readonly name: "DuplicateDocumentVersionName";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<DuplicateDocumentVersionName, __BaseException>);
-}
-/**
- * @public
- */
-export interface UpdateDocumentRequest {
-    /**
-     * <p>A valid JSON or YAML string.</p>
-     * @public
-     */
-    Content: string | undefined;
-    /**
-     * <p>A list of key-value pairs that describe attachments to a version of a document.</p>
-     * @public
-     */
-    Attachments?: AttachmentsSource[] | undefined;
-    /**
-     * <p>The name of the SSM document that you want to update.</p>
-     * @public
-     */
-    Name: string | undefined;
-    /**
-     * <p>The friendly name of the SSM document that you want to update. This value can differ for
-     *    each version of the document. If you don't specify a value for this parameter in your request,
-     *    the existing value is applied to the new document version.</p>
-     * @public
-     */
-    DisplayName?: string | undefined;
-    /**
-     * <p>An optional field specifying the version of the artifact you are updating with the document.
-     *    For example, 12.6. This value is unique across all versions of a document, and can't be
-     *    changed.</p>
-     * @public
-     */
-    VersionName?: string | undefined;
-    /**
-     * <p>The version of the document that you want to update. Currently, Systems Manager supports updating only
-     *    the latest version of the document. You can specify the version number of the latest version or
-     *    use the <code>$LATEST</code> variable.</p>
-     *          <note>
-     *             <p>If you change a document version for a State Manager association, Systems Manager immediately runs
-     *     the association unless you previously specifed the <code>apply-only-at-cron-interval</code>
-     *     parameter.</p>
-     *          </note>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>Specify the document format for the new document version. Systems Manager supports JSON and YAML
-     *    documents. JSON is the default format.</p>
-     * @public
-     */
-    DocumentFormat?: DocumentFormat | undefined;
-    /**
-     * <p>Specify a new target type for the document.</p>
-     * @public
-     */
-    TargetType?: string | undefined;
-}
-/**
- * @public
- */
-export interface UpdateDocumentResult {
-    /**
-     * <p>A description of the document that was updated.</p>
-     * @public
-     */
-    DocumentDescription?: DocumentDescription | undefined;
-}
-/**
- * @public
- */
-export interface UpdateDocumentDefaultVersionRequest {
-    /**
-     * <p>The name of a custom document that you want to set as the default version.</p>
-     * @public
-     */
-    Name: string | undefined;
-    /**
-     * <p>The version of a custom document that you want to set as the default version.</p>
-     * @public
-     */
-    DocumentVersion: string | undefined;
-}
-/**
- * <p>A default version of a document.</p>
- * @public
- */
-export interface DocumentDefaultVersionDescription {
-    /**
-     * <p>The name of the document.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>The default version of the document.</p>
-     * @public
-     */
-    DefaultVersion?: string | undefined;
-    /**
-     * <p>The default version of the artifact associated with the document.</p>
-     * @public
-     */
-    DefaultVersionName?: string | undefined;
-}
-/**
- * @public
- */
-export interface UpdateDocumentDefaultVersionResult {
-    /**
-     * <p>The description of a custom document that you want to set as the default version.</p>
-     * @public
-     */
-    Description?: DocumentDefaultVersionDescription | undefined;
-}
-/**
- * @public
- * @enum
- */
-export declare const DocumentReviewAction: {
-    readonly Approve: "Approve";
-    readonly Reject: "Reject";
-    readonly SendForReview: "SendForReview";
-    readonly UpdateReview: "UpdateReview";
-};
-/**
- * @public
- */
-export type DocumentReviewAction = (typeof DocumentReviewAction)[keyof typeof DocumentReviewAction];
-/**
- * <p>Information about a document approval review.</p>
- * @public
- */
-export interface DocumentReviews {
-    /**
-     * <p>The action to take on a document approval review request.</p>
-     * @public
-     */
-    Action: DocumentReviewAction | undefined;
-    /**
-     * <p>A comment entered by a user in your organization about the document review request.</p>
-     * @public
-     */
-    Comment?: DocumentReviewCommentSource[] | undefined;
-}
-/**
- * @public
- */
-export interface UpdateDocumentMetadataRequest {
-    /**
-     * <p>The name of the change template for which a version's metadata is to be updated.</p>
-     * @public
-     */
-    Name: string | undefined;
-    /**
-     * <p>The version of a change template in which to update approval metadata.</p>
-     * @public
-     */
-    DocumentVersion?: string | undefined;
-    /**
-     * <p>The change template review details to update.</p>
-     * @public
-     */
-    DocumentReviews: DocumentReviews | undefined;
-}
-/**
- * @public
- */
-export interface UpdateDocumentMetadataResponse {
-}
-/**
- * @public
- */
-export interface UpdateMaintenanceWindowRequest {
-    /**
-     * <p>The ID of the maintenance window to update.</p>
-     * @public
-     */
-    WindowId: string | undefined;
-    /**
-     * <p>The name of the maintenance window.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>An optional description for the update request.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>The date and time, in ISO-8601 Extended format, for when you want the maintenance window to
-     *    become active. <code>StartDate</code> allows you to delay activation of the maintenance window
-     *    until the specified future date.</p>
-     *          <note>
-     *             <p>When using a rate schedule, if you provide a start date that occurs in the past, the
-     *     current date and time are used as the start date. </p>
-     *          </note>
-     * @public
-     */
-    StartDate?: string | undefined;
-    /**
-     * <p>The date and time, in ISO-8601 Extended format, for when you want the maintenance window to
-     *    become inactive. <code>EndDate</code> allows you to set a date and time in the future when the
-     *    maintenance window will no longer run.</p>
-     * @public
-     */
-    EndDate?: string | undefined;
-    /**
-     * <p>The schedule of the maintenance window in the form of a cron or rate expression.</p>
-     * @public
-     */
-    Schedule?: string | undefined;
-    /**
-     * <p>The time zone that the scheduled maintenance window executions are based on, in Internet
-     *    Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC", or
-     *    "Asia/Seoul". For more information, see the <a href="https://www.iana.org/time-zones">Time
-     *     Zone Database</a> on the IANA website.</p>
-     * @public
-     */
-    ScheduleTimezone?: string | undefined;
-    /**
-     * <p>The number of days to wait after the date and time specified by a cron expression before
-     *    running the maintenance window.</p>
-     *          <p>For example, the following cron expression schedules a maintenance window to run the third
-     *    Tuesday of every month at 11:30 PM.</p>
-     *          <p>
-     *             <code>cron(30 23 ? * TUE#3 *)</code>
-     *          </p>
-     *          <p>If the schedule offset is <code>2</code>, the maintenance window won't run until two days
-     *    later.</p>
-     * @public
-     */
-    ScheduleOffset?: number | undefined;
-    /**
-     * <p>The duration of the maintenance window in hours.</p>
-     * @public
-     */
-    Duration?: number | undefined;
-    /**
-     * <p>The number of hours before the end of the maintenance window that Amazon Web Services Systems Manager stops scheduling
-     *    new tasks for execution.</p>
-     * @public
-     */
-    Cutoff?: number | undefined;
-    /**
-     * <p>Whether targets must be registered with the maintenance window before tasks can be defined
-     *    for those targets.</p>
-     * @public
-     */
-    AllowUnassociatedTargets?: boolean | undefined;
-    /**
-     * <p>Whether the maintenance window is enabled.</p>
-     * @public
-     */
-    Enabled?: boolean | undefined;
-    /**
-     * <p>If <code>True</code>, then all fields that are required by the <a>CreateMaintenanceWindow</a> operation are also required for this API request. Optional
-     *    fields that aren't specified are set to null. </p>
-     * @public
-     */
-    Replace?: boolean | undefined;
-}
-/**
- * @public
- */
-export interface UpdateMaintenanceWindowResult {
-    /**
-     * <p>The ID of the created maintenance window.</p>
-     * @public
-     */
-    WindowId?: string | undefined;
-    /**
-     * <p>The name of the maintenance window.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>An optional description of the update.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>The date and time, in ISO-8601 Extended format, for when the maintenance window is scheduled
-     *    to become active. The maintenance window won't run before this specified time.</p>
-     * @public
-     */
-    StartDate?: string | undefined;
-    /**
-     * <p>The date and time, in ISO-8601 Extended format, for when the maintenance window is scheduled
-     *    to become inactive. The maintenance window won't run after this specified time.</p>
-     * @public
-     */
-    EndDate?: string | undefined;
-    /**
-     * <p>The schedule of the maintenance window in the form of a cron or rate expression.</p>
-     * @public
-     */
-    Schedule?: string | undefined;
-    /**
-     * <p>The time zone that the scheduled maintenance window executions are based on, in Internet
-     *    Assigned Numbers Authority (IANA) format. For example: "America/Los_Angeles", "UTC", or
-     *    "Asia/Seoul". For more information, see the <a href="https://www.iana.org/time-zones">Time
-     *     Zone Database</a> on the IANA website.</p>
-     * @public
-     */
-    ScheduleTimezone?: string | undefined;
-    /**
-     * <p>The number of days to wait to run a maintenance window after the scheduled cron expression
-     *    date and time.</p>
-     * @public
-     */
-    ScheduleOffset?: number | undefined;
-    /**
-     * <p>The duration of the maintenance window in hours.</p>
-     * @public
-     */
-    Duration?: number | undefined;
-    /**
-     * <p>The number of hours before the end of the maintenance window that Amazon Web Services Systems Manager stops scheduling
-     *    new tasks for execution.</p>
-     * @public
-     */
-    Cutoff?: number | undefined;
-    /**
-     * <p>Whether targets must be registered with the maintenance window before tasks can be defined
-     *    for those targets.</p>
-     * @public
-     */
-    AllowUnassociatedTargets?: boolean | undefined;
-    /**
-     * <p>Whether the maintenance window is enabled.</p>
-     * @public
-     */
-    Enabled?: boolean | undefined;
-}
-/**
- * @public
- */
-export interface UpdateMaintenanceWindowTargetRequest {
-    /**
-     * <p>The maintenance window ID with which to modify the target.</p>
-     * @public
-     */
-    WindowId: string | undefined;
-    /**
-     * <p>The target ID to modify.</p>
-     * @public
-     */
-    WindowTargetId: string | undefined;
-    /**
-     * <p>The targets to add or replace.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>User-provided value that will be included in any Amazon CloudWatch Events events raised while
-     *    running tasks for these targets in this maintenance window.</p>
-     * @public
-     */
-    OwnerInformation?: string | undefined;
-    /**
-     * <p>A name for the update.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>An optional description for the update.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>If <code>True</code>, then all fields that are required by the <a>RegisterTargetWithMaintenanceWindow</a> operation are also required for this API
-     *    request. Optional fields that aren't specified are set to null.</p>
-     * @public
-     */
-    Replace?: boolean | undefined;
-}
-/**
- * @public
- */
-export interface UpdateMaintenanceWindowTargetResult {
-    /**
-     * <p>The maintenance window ID specified in the update request.</p>
-     * @public
-     */
-    WindowId?: string | undefined;
-    /**
-     * <p>The target ID specified in the update request.</p>
-     * @public
-     */
-    WindowTargetId?: string | undefined;
-    /**
-     * <p>The updated targets.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>The updated owner.</p>
-     * @public
-     */
-    OwnerInformation?: string | undefined;
-    /**
-     * <p>The updated name.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>The updated description.</p>
-     * @public
-     */
-    Description?: string | undefined;
-}
-/**
- * @public
- */
-export interface UpdateMaintenanceWindowTaskRequest {
-    /**
-     * <p>The maintenance window ID that contains the task to modify.</p>
-     * @public
-     */
-    WindowId: string | undefined;
-    /**
-     * <p>The task ID to modify.</p>
-     * @public
-     */
-    WindowTaskId: string | undefined;
-    /**
-     * <p>The targets (either managed nodes or tags) to modify. Managed nodes are specified using the
-     *    format <code>Key=instanceids,Values=instanceID_1,instanceID_2</code>. Tags are specified using
-     *    the format <code> Key=tag_name,Values=tag_value</code>. </p>
-     *          <note>
-     *             <p>One or more targets must be specified for maintenance window Run Command-type tasks.
-     *     Depending on the task, targets are optional for other maintenance window task types (Automation,
-     *      Lambda, and Step Functions). For more information about running tasks
-     *     that don't specify targets, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">Registering
-     *      maintenance window tasks without targets</a> in the
-     *     <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     *          </note>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>The task ARN to modify.</p>
-     * @public
-     */
-    TaskArn?: string | undefined;
-    /**
-     * <p>The Amazon Resource Name (ARN) of the IAM service role for
-     *                 Amazon Web Services Systems Manager to assume when running a maintenance window task. If you do not specify a
-     *                 service role ARN, Systems Manager uses a service-linked role in your account. If no
-     *                 appropriate service-linked role for Systems Manager exists in your account, it is created when
-     *                 you run <code>RegisterTaskWithMaintenanceWindow</code>.</p>
-     *          <p>However, for an improved security posture, we strongly recommend creating a custom
-     *                 policy and custom service role for running your maintenance window tasks. The policy
-     *                 can be crafted to provide only the permissions needed for your particular
-     *                 maintenance window tasks. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-maintenance-permissions.html">Setting up Maintenance Windows</a> in the in the
-     *                     <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    ServiceRoleArn?: string | undefined;
-    /**
-     * <p>The parameters to modify.</p>
-     *          <note>
-     *             <p>
-     *                <code>TaskParameters</code> has been deprecated. To specify parameters to pass to a task when it runs,
-     *       instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code> structure. For information
-     *       about how Systems Manager handles these options for the supported maintenance window task
-     *       types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</p>
-     *          </note>
-     *          <p>The map has the following format:</p>
-     *          <p>Key: string, between 1 and 255 characters</p>
-     *          <p>Value: an array of strings, each string is between 1 and 255 characters</p>
-     * @public
-     */
-    TaskParameters?: Record<string, MaintenanceWindowTaskParameterValueExpression> | undefined;
-    /**
-     * <p>The parameters that the task should use during execution. Populate only the fields that
-     *    match the task type. All other fields should be empty.</p>
-     *          <important>
-     *             <p>When you update a maintenance window task that has options specified in
-     *      <code>TaskInvocationParameters</code>, you must provide again all the
-     *      <code>TaskInvocationParameters</code> values that you want to retain. The values you don't
-     *     specify again are removed. For example, suppose that when you registered a Run Command task, you
-     *     specified <code>TaskInvocationParameters</code> values for <code>Comment</code>,
-     *      <code>NotificationConfig</code>, and <code>OutputS3BucketName</code>. If you update the
-     *     maintenance window task and specify only a different <code>OutputS3BucketName</code> value, the
-     *     values for <code>Comment</code> and <code>NotificationConfig</code> are removed.</p>
-     *          </important>
-     * @public
-     */
-    TaskInvocationParameters?: MaintenanceWindowTaskInvocationParameters | undefined;
-    /**
-     * <p>The new task priority to specify. The lower the number, the higher the priority. Tasks that
-     *    have the same priority are scheduled in parallel.</p>
-     * @public
-     */
-    Priority?: number | undefined;
-    /**
-     * <p>The new <code>MaxConcurrency</code> value you want to specify. <code>MaxConcurrency</code>
-     *    is the number of targets that are allowed to run this task, in parallel.</p>
-     *          <note>
-     *             <p>Although this element is listed as "Required: No", a value can be omitted only when you are
-     *     registering or updating a <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">targetless
-     *      task</a> You must provide a value in all other cases.</p>
-     *             <p>For maintenance window tasks without a target specified, you can't supply a value for this
-     *     option. Instead, the system inserts a placeholder value of <code>1</code>. This value doesn't
-     *     affect the running of your task.</p>
-     *          </note>
-     * @public
-     */
-    MaxConcurrency?: string | undefined;
-    /**
-     * <p>The new <code>MaxErrors</code> value to specify. <code>MaxErrors</code> is the maximum
-     *    number of errors that are allowed before the task stops being scheduled.</p>
-     *          <note>
-     *             <p>Although this element is listed as "Required: No", a value can be omitted only when you are
-     *     registering or updating a <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/maintenance-windows-targetless-tasks.html">targetless
-     *      task</a> You must provide a value in all other cases.</p>
-     *             <p>For maintenance window tasks without a target specified, you can't supply a value for this
-     *     option. Instead, the system inserts a placeholder value of <code>1</code>. This value doesn't
-     *     affect the running of your task.</p>
-     *          </note>
-     * @public
-     */
-    MaxErrors?: string | undefined;
-    /**
-     * <p>The new logging location in Amazon S3 to specify.</p>
-     *          <note>
-     *             <p>
-     *                <code>LoggingInfo</code> has been deprecated. To specify an Amazon Simple Storage Service (Amazon S3) bucket to contain logs, instead use the
-     *       <code>OutputS3BucketName</code> and <code>OutputS3KeyPrefix</code> options in the <code>TaskInvocationParameters</code> structure.
-     *       For information about how Amazon Web Services Systems Manager handles these options for the supported maintenance
-     *       window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</p>
-     *          </note>
-     * @public
-     */
-    LoggingInfo?: LoggingInfo | undefined;
-    /**
-     * <p>The new task name to specify.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>The new task description to specify.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>If True, then all fields that are required by the <a>RegisterTaskWithMaintenanceWindow</a> operation are also required for this API request.
-     *    Optional fields that aren't specified are set to null.</p>
-     * @public
-     */
-    Replace?: boolean | undefined;
-    /**
-     * <p>Indicates whether tasks should continue to run after the cutoff time specified in the
-     *    maintenance windows is reached. </p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>CONTINUE_TASK</code>: When the cutoff time is reached, any tasks that are running
-     *      continue. The default value.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>CANCEL_TASK</code>:</p>
-     *                <ul>
-     *                   <li>
-     *                      <p>For Automation, Lambda, Step Functions tasks: When the cutoff
-     *        time is reached, any task invocations that are already running continue, but no new task
-     *        invocations are started.</p>
-     *                   </li>
-     *                   <li>
-     *                      <p>For Run Command tasks: When the cutoff time is reached, the system sends a <a>CancelCommand</a> operation that attempts to cancel the command associated with the
-     *        task. However, there is no guarantee that the command will be terminated and the underlying
-     *        process stopped.</p>
-     *                   </li>
-     *                </ul>
-     *                <p>The status for tasks that are not completed is <code>TIMED_OUT</code>.</p>
-     *             </li>
-     *          </ul>
-     * @public
-     */
-    CutoffBehavior?: MaintenanceWindowTaskCutoffBehavior | undefined;
-    /**
-     * <p>The CloudWatch alarm you want to apply to your maintenance window task.</p>
-     * @public
-     */
-    AlarmConfiguration?: AlarmConfiguration | undefined;
-}
-/**
- * @public
- */
-export interface UpdateMaintenanceWindowTaskResult {
-    /**
-     * <p>The ID of the maintenance window that was updated.</p>
-     * @public
-     */
-    WindowId?: string | undefined;
-    /**
-     * <p>The task ID of the maintenance window that was updated.</p>
-     * @public
-     */
-    WindowTaskId?: string | undefined;
-    /**
-     * <p>The updated target values.</p>
-     * @public
-     */
-    Targets?: Target[] | undefined;
-    /**
-     * <p>The updated task ARN value.</p>
-     * @public
-     */
-    TaskArn?: string | undefined;
-    /**
-     * <p>The Amazon Resource Name (ARN) of the IAM service role for
-     *                 Amazon Web Services Systems Manager to assume when running a maintenance window task. If you do not specify a
-     *                 service role ARN, Systems Manager uses a service-linked role in your account. If no
-     *                 appropriate service-linked role for Systems Manager exists in your account, it is created when
-     *                 you run <code>RegisterTaskWithMaintenanceWindow</code>.</p>
-     *          <p>However, for an improved security posture, we strongly recommend creating a custom
-     *                 policy and custom service role for running your maintenance window tasks. The policy
-     *                 can be crafted to provide only the permissions needed for your particular
-     *                 maintenance window tasks. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/sysman-maintenance-permissions.html">Setting up Maintenance Windows</a> in the in the
-     *                     <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    ServiceRoleArn?: string | undefined;
-    /**
-     * <p>The updated parameter values.</p>
-     *          <note>
-     *             <p>
-     *                <code>TaskParameters</code> has been deprecated. To specify parameters to pass to a task when it runs,
-     *       instead use the <code>Parameters</code> option in the <code>TaskInvocationParameters</code> structure. For information
-     *       about how Systems Manager handles these options for the supported maintenance window task
-     *       types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</p>
-     *          </note>
-     * @public
-     */
-    TaskParameters?: Record<string, MaintenanceWindowTaskParameterValueExpression> | undefined;
-    /**
-     * <p>The updated parameter values.</p>
-     * @public
-     */
-    TaskInvocationParameters?: MaintenanceWindowTaskInvocationParameters | undefined;
-    /**
-     * <p>The updated priority value.</p>
-     * @public
-     */
-    Priority?: number | undefined;
-    /**
-     * <p>The updated <code>MaxConcurrency</code> value.</p>
-     * @public
-     */
-    MaxConcurrency?: string | undefined;
-    /**
-     * <p>The updated <code>MaxErrors</code> value.</p>
-     * @public
-     */
-    MaxErrors?: string | undefined;
-    /**
-     * <p>The updated logging information in Amazon S3.</p>
-     *          <note>
-     *             <p>
-     *                <code>LoggingInfo</code> has been deprecated. To specify an Amazon Simple Storage Service (Amazon S3) bucket to contain logs, instead use the
-     *       <code>OutputS3BucketName</code> and <code>OutputS3KeyPrefix</code> options in the <code>TaskInvocationParameters</code> structure.
-     *       For information about how Amazon Web Services Systems Manager handles these options for the supported maintenance
-     *       window task types, see <a>MaintenanceWindowTaskInvocationParameters</a>.</p>
-     *          </note>
-     * @public
-     */
-    LoggingInfo?: LoggingInfo | undefined;
-    /**
-     * <p>The updated task name.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>The updated task description.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>The specification for whether tasks should continue to run after the cutoff time specified
-     *    in the maintenance windows is reached. </p>
-     * @public
-     */
-    CutoffBehavior?: MaintenanceWindowTaskCutoffBehavior | undefined;
-    /**
-     * <p>The details for the CloudWatch alarm you applied to your maintenance window
-     *    task.</p>
-     * @public
-     */
-    AlarmConfiguration?: AlarmConfiguration | undefined;
-}
-/**
- * @public
- */
-export interface UpdateManagedInstanceRoleRequest {
-    /**
-     * <p>The ID of the managed node where you want to update the role.</p>
-     * @public
-     */
-    InstanceId: string | undefined;
-    /**
-     * <p>The name of the Identity and Access Management (IAM) role that you want to assign to
-     *    the managed node. This IAM role must provide AssumeRole permissions for the
-     *    Amazon Web Services Systems Manager service principal <code>ssm.amazonaws.com</code>. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/hybrid-multicloud-service-role.html">Create the IAM service role required for Systems Manager in hybrid and multicloud
-     *     environments</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     *          <note>
-     *             <p>You can't specify an IAM service-linked role for this parameter. You must
-     *     create a unique role.</p>
-     *          </note>
-     * @public
-     */
-    IamRole: string | undefined;
-}
-/**
- * @public
- */
-export interface UpdateManagedInstanceRoleResult {
-}
-/**
- * @public
- */
-export interface UpdateOpsItemRequest {
-    /**
-     * <p>User-defined text that contains information about the OpsItem, in Markdown format. </p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>Add new keys or edit existing key-value pairs of the OperationalData map in the OpsItem
-     *    object.</p>
-     *          <p>Operational data is custom data that provides useful reference details about the OpsItem.
-     *    For example, you can specify log files, error strings, license keys, troubleshooting tips, or
-     *    other relevant data. You enter operational data as key-value pairs. The key has a maximum length
-     *    of 128 characters. The value has a maximum size of 20 KB.</p>
-     *          <important>
-     *             <p>Operational data keys <i>can't</i> begin with the following:
-     *      <code>amazon</code>, <code>aws</code>, <code>amzn</code>, <code>ssm</code>,
-     *      <code>/amazon</code>, <code>/aws</code>, <code>/amzn</code>, <code>/ssm</code>.</p>
-     *          </important>
-     *          <p>You can choose to make the data searchable by other users in the account or you can restrict
-     *    search access. Searchable data means that all users with access to the OpsItem Overview page (as
-     *    provided by the <a>DescribeOpsItems</a> API operation) can view and search on the
-     *    specified data. Operational data that isn't searchable is only viewable by users who have access
-     *    to the OpsItem (as provided by the <a>GetOpsItem</a> API operation).</p>
-     *          <p>Use the <code>/aws/resources</code> key in OperationalData to specify a related resource in
-     *    the request. Use the <code>/aws/automations</code> key in OperationalData to associate an
-     *    Automation runbook with the OpsItem. To view Amazon Web Services CLI example commands that use these keys, see
-     *     <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-manually-create-OpsItems.html">Creating OpsItems
-     *     manually</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    OperationalData?: Record<string, OpsItemDataValue> | undefined;
-    /**
-     * <p>Keys that you want to remove from the OperationalData map.</p>
-     * @public
-     */
-    OperationalDataToDelete?: string[] | undefined;
-    /**
-     * <p>The Amazon Resource Name (ARN) of an SNS topic where notifications are sent when this
-     *    OpsItem is edited or changed.</p>
-     * @public
-     */
-    Notifications?: OpsItemNotification[] | undefined;
-    /**
-     * <p>The importance of this OpsItem in relation to other OpsItems in the system.</p>
-     * @public
-     */
-    Priority?: number | undefined;
-    /**
-     * <p>One or more OpsItems that share something in common with the current OpsItems. For example,
-     *    related OpsItems can include OpsItems with similar error messages, impacted resources, or
-     *    statuses for the impacted resource.</p>
-     * @public
-     */
-    RelatedOpsItems?: RelatedOpsItem[] | undefined;
-    /**
-     * <p>The OpsItem status. For more information, see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/OpsCenter-working-with-OpsItems-editing-details.html">Editing OpsItem details</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    Status?: OpsItemStatus | undefined;
-    /**
-     * <p>The ID of the OpsItem.</p>
-     * @public
-     */
-    OpsItemId: string | undefined;
-    /**
-     * <p>A short heading that describes the nature of the OpsItem and the impacted resource.</p>
-     * @public
-     */
-    Title?: string | undefined;
-    /**
-     * <p>Specify a new category for an OpsItem.</p>
-     * @public
-     */
-    Category?: string | undefined;
-    /**
-     * <p>Specify a new severity for an OpsItem.</p>
-     * @public
-     */
-    Severity?: string | undefined;
-    /**
-     * <p>The time a runbook workflow started. Currently reported only for the OpsItem type
-     *     <code>/aws/changerequest</code>.</p>
-     * @public
-     */
-    ActualStartTime?: Date | undefined;
-    /**
-     * <p>The time a runbook workflow ended. Currently reported only for the OpsItem type
-     *     <code>/aws/changerequest</code>.</p>
-     * @public
-     */
-    ActualEndTime?: Date | undefined;
-    /**
-     * <p>The time specified in a change request for a runbook workflow to start. Currently supported
-     *    only for the OpsItem type <code>/aws/changerequest</code>.</p>
-     * @public
-     */
-    PlannedStartTime?: Date | undefined;
-    /**
-     * <p>The time specified in a change request for a runbook workflow to end. Currently supported
-     *    only for the OpsItem type <code>/aws/changerequest</code>.</p>
-     * @public
-     */
-    PlannedEndTime?: Date | undefined;
-    /**
-     * <p>The OpsItem Amazon Resource Name (ARN).</p>
-     * @public
-     */
-    OpsItemArn?: string | undefined;
-}
-/**
- * @public
- */
-export interface UpdateOpsItemResponse {
-}
-/**
- * <p>The OpsMetadata object exceeds the maximum number of OpsMetadata keys that you can assign to
- *    an application in Application Manager.</p>
- * @public
- */
-export declare class OpsMetadataKeyLimitExceededException extends __BaseException {
-    readonly name: "OpsMetadataKeyLimitExceededException";
-    readonly $fault: "client";
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<OpsMetadataKeyLimitExceededException, __BaseException>);
-}
-/**
- * @public
- */
-export interface UpdateOpsMetadataRequest {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the OpsMetadata Object to update.</p>
-     * @public
-     */
-    OpsMetadataArn: string | undefined;
-    /**
-     * <p>Metadata to add to an OpsMetadata object.</p>
-     * @public
-     */
-    MetadataToUpdate?: Record<string, MetadataValue> | undefined;
-    /**
-     * <p>The metadata keys to delete from the OpsMetadata object. </p>
-     * @public
-     */
-    KeysToDelete?: string[] | undefined;
-}
-/**
- * @public
- */
-export interface UpdateOpsMetadataResult {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the OpsMetadata Object that was updated.</p>
-     * @public
-     */
-    OpsMetadataArn?: string | undefined;
-}
-/**
- * @public
- */
-export interface UpdatePatchBaselineRequest {
-    /**
-     * <p>The ID of the patch baseline to update.</p>
-     * @public
-     */
-    BaselineId: string | undefined;
-    /**
-     * <p>The name of the patch baseline.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>A set of global filters used to include patches in the baseline.</p>
-     *          <important>
-     *             <p>The <code>GlobalFilters</code> parameter can be configured only by using the CLI or an Amazon Web Services SDK. It can't be configured from the Patch Manager
-     *     console, and its value isn't displayed in the console.</p>
-     *          </important>
-     * @public
-     */
-    GlobalFilters?: PatchFilterGroup | undefined;
-    /**
-     * <p>A set of rules used to include patches in the baseline.</p>
-     * @public
-     */
-    ApprovalRules?: PatchRuleGroup | undefined;
-    /**
-     * <p>A list of explicitly approved patches for the baseline.</p>
-     *          <p>For information about accepted formats for lists of approved patches and rejected patches,
-     *                         see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">Package
-     *                         name formats for approved and rejected patch lists</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    ApprovedPatches?: string[] | undefined;
-    /**
-     * <p>Assigns a new compliance severity level to an existing patch baseline.</p>
-     * @public
-     */
-    ApprovedPatchesComplianceLevel?: PatchComplianceLevel | undefined;
-    /**
-     * <p>Indicates whether the list of approved patches includes non-security updates that should be
-     *    applied to the managed nodes. The default value is <code>false</code>. Applies to Linux managed
-     *    nodes only.</p>
-     * @public
-     */
-    ApprovedPatchesEnableNonSecurity?: boolean | undefined;
-    /**
-     * <p>A list of explicitly rejected patches for the baseline.</p>
-     *          <p>For information about accepted formats for lists of approved patches and rejected patches,
-     *                         see <a href="https://docs.aws.amazon.com/systems-manager/latest/userguide/patch-manager-approved-rejected-package-name-formats.html">Package
-     *                         name formats for approved and rejected patch lists</a> in the <i>Amazon Web Services Systems Manager User Guide</i>.</p>
-     * @public
-     */
-    RejectedPatches?: string[] | undefined;
-    /**
-     * <p>The action for Patch Manager to take on patches included in the
-     *     <code>RejectedPackages</code> list.</p>
-     *          <dl>
-     *             <dt>ALLOW_AS_DEPENDENCY</dt>
-     *             <dd>
-     *                <p>
-     *                   <b>Linux and macOS</b>: A package in the rejected patches list
-     *       is installed only if it is a dependency of another package. It is considered compliant with
-     *       the patch baseline, and its status is reported as <code>INSTALLED_OTHER</code>. This is the
-     *       default action if no option is specified.</p>
-     *                <p>
-     *                   <b>Windows Server</b>: Windows Server doesn't support the
-     *       concept of package dependencies. If a package in the rejected patches list and already
-     *       installed on the node, its status is reported as <code>INSTALLED_OTHER</code>. Any package not
-     *       already installed on the node is skipped. This is the default action if no option is
-     *       specified.</p>
-     *             </dd>
-     *             <dt>BLOCK</dt>
-     *             <dd>
-     *                <p>
-     *                   <b>All OSs</b>: Packages in the rejected patches list, and
-     *       packages that include them as dependencies, aren't installed by Patch Manager under any
-     *       circumstances. If a package was installed before it was added to the rejected patches list, or
-     *       is installed outside of Patch Manager afterward, it's considered noncompliant with the patch
-     *       baseline and its status is reported as <code>INSTALLED_REJECTED</code>.</p>
-     *             </dd>
-     *          </dl>
-     * @public
-     */
-    RejectedPatchesAction?: PatchAction | undefined;
-    /**
-     * <p>A description of the patch baseline.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>Information about the patches to use to update the managed nodes, including target operating
-     *    systems and source repositories. Applies to Linux managed nodes only.</p>
-     * @public
-     */
-    Sources?: PatchSource[] | undefined;
-    /**
-     * <p>Indicates the status to be assigned to security patches that are available but not approved
-     *    because they don't meet the installation criteria specified in the patch baseline.</p>
-     *          <p>Example scenario: Security patches that you might want installed can be skipped if you have
-     *    specified a long period to wait after a patch is released before installation. If an update to
-     *    the patch is released during your specified waiting period, the waiting period for installing the
-     *    patch starts over. If the waiting period is too long, multiple versions of the patch could be
-     *    released but never installed.</p>
-     *          <p>Supported for Windows Server managed nodes only.</p>
-     * @public
-     */
-    AvailableSecurityUpdatesComplianceStatus?: PatchComplianceStatus | undefined;
-    /**
-     * <p>If True, then all fields that are required by the <a>CreatePatchBaseline</a>
-     *    operation are also required for this API request. Optional fields that aren't specified are set
-     *    to null.</p>
-     * @public
-     */
-    Replace?: boolean | undefined;
-}
-/**
- * @public
- */
-export interface UpdatePatchBaselineResult {
-    /**
-     * <p>The ID of the deleted patch baseline.</p>
-     * @public
-     */
-    BaselineId?: string | undefined;
-    /**
-     * <p>The name of the patch baseline.</p>
-     * @public
-     */
-    Name?: string | undefined;
-    /**
-     * <p>The operating system rule used by the updated patch baseline.</p>
-     * @public
-     */
-    OperatingSystem?: OperatingSystem | undefined;
-    /**
-     * <p>A set of global filters used to exclude patches from the baseline.</p>
-     * @public
-     */
-    GlobalFilters?: PatchFilterGroup | undefined;
-    /**
-     * <p>A set of rules used to include patches in the baseline.</p>
-     * @public
-     */
-    ApprovalRules?: PatchRuleGroup | undefined;
-    /**
-     * <p>A list of explicitly approved patches for the baseline.</p>
-     * @public
-     */
-    ApprovedPatches?: string[] | undefined;
-    /**
-     * <p>The compliance severity level assigned to the patch baseline after the update
-     *    completed.</p>
-     * @public
-     */
-    ApprovedPatchesComplianceLevel?: PatchComplianceLevel | undefined;
-    /**
-     * <p>Indicates whether the list of approved patches includes non-security updates that should be
-     *    applied to the managed nodes. The default value is <code>false</code>. Applies to Linux managed
-     *    nodes only.</p>
-     * @public
-     */
-    ApprovedPatchesEnableNonSecurity?: boolean | undefined;
-    /**
-     * <p>A list of explicitly rejected patches for the baseline.</p>
-     * @public
-     */
-    RejectedPatches?: string[] | undefined;
-    /**
-     * <p>The action specified to take on patches included in the <code>RejectedPatches</code> list. A
-     *    patch can be allowed only if it is a dependency of another package, or blocked entirely along
-     *    with packages that include it as a dependency.</p>
-     * @public
-     */
-    RejectedPatchesAction?: PatchAction | undefined;
-    /**
-     * <p>The date when the patch baseline was created.</p>
-     * @public
-     */
-    CreatedDate?: Date | undefined;
-    /**
-     * <p>The date when the patch baseline was last modified.</p>
-     * @public
-     */
-    ModifiedDate?: Date | undefined;
-    /**
-     * <p>A description of the patch baseline.</p>
-     * @public
-     */
-    Description?: string | undefined;
-    /**
-     * <p>Information about the patches to use to update the managed nodes, including target operating
-     *    systems and source repositories. Applies to Linux managed nodes only.</p>
-     * @public
-     */
-    Sources?: PatchSource[] | undefined;
-    /**
-     * <p>Indicates the compliance status of managed nodes for which security-related patches are
-     *    available but were not approved. This preference is specified when the
-     *     <code>CreatePatchBaseline</code> or <code>UpdatePatchBaseline</code> commands are run.</p>
-     *          <p>Applies to Windows Server managed nodes only.</p>
-     * @public
-     */
-    AvailableSecurityUpdatesComplianceStatus?: PatchComplianceStatus | undefined;
-}
-/**
- * <p>Another <code>UpdateResourceDataSync</code> request is being processed. Wait a few minutes
- *    and try again.</p>
- * @public
- */
-export declare class ResourceDataSyncConflictException extends __BaseException {
-    readonly name: "ResourceDataSyncConflictException";
-    readonly $fault: "client";
-    Message?: string | undefined;
-    /**
-     * @internal
-     */
-    constructor(opts: __ExceptionOptionType<ResourceDataSyncConflictException, __BaseException>);
-}
-/**
- * @public
- */
-export interface UpdateResourceDataSyncRequest {
-    /**
-     * <p>The name of the resource data sync you want to update.</p>
-     * @public
-     */
-    SyncName: string | undefined;
-    /**
-     * <p>The type of resource data sync. The supported <code>SyncType</code> is
-     *    SyncFromSource.</p>
-     * @public
-     */
-    SyncType: string | undefined;
-    /**
-     * <p>Specify information about the data sources to synchronize.</p>
-     * @public
-     */
-    SyncSource: ResourceDataSyncSource | undefined;
-}
-/**
- * @public
- */
-export interface UpdateResourceDataSyncResult {
-}
-/**
- * <p>The request body of the UpdateServiceSetting API operation.</p>
- * @public
- */
-export interface UpdateServiceSettingRequest {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the service setting to update. For example,
-     *     <code>arn:aws:ssm:us-east-1:111122223333:servicesetting/ssm/parameter-store/high-throughput-enabled</code>.
-     *    The setting ID can be one of the following.</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/appmanager/appmanager-enabled</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/automation/customer-script-log-destination</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/automation/customer-script-log-group-name</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>/ssm/automation/enable-adaptive-concurrency</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/documents/console/public-sharing-permission</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/managed-instance/activation-tier</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/managed-instance/default-ec2-instance-management-role</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/opsinsights/opscenter</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/parameter-store/default-parameter-tier</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>/ssm/parameter-store/high-throughput-enabled</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     *          <note>
-     *             <p>Permissions to update the
-     *      <code>/ssm/managed-instance/default-ec2-instance-management-role</code> setting should only be
-     *     provided to administrators. Implement least privilege access when allowing individuals to
-     *     configure or modify the Default Host Management Configuration.</p>
-     *          </note>
-     * @public
-     */
-    SettingId: string | undefined;
-    /**
-     * <p>The new value to specify for the service setting. The following list specifies the available
-     *    values for each setting.</p>
-     *          <ul>
-     *             <li>
-     *                <p>For <code>/ssm/appmanager/appmanager-enabled</code>, enter <code>True</code> or
-     *       <code>False</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/automation/customer-script-log-destination</code>, enter <code>CloudWatch</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/automation/customer-script-log-group-name</code>, enter the name of an
-     *       Amazon CloudWatch Logs log group.</p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/documents/console/public-sharing-permission</code>, enter
-     *       <code>Enable</code> or <code>Disable</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/managed-instance/activation-tier</code>, enter <code>standard</code> or
-     *       <code>advanced</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/managed-instance/default-ec2-instance-management-role</code>, enter the
-     *      name of an IAM role. </p>
-     *             </li>
-     *             <li>
-     *                <p> For <code>/ssm/opsinsights/opscenter</code>, enter <code>Enabled</code> or
-     *       <code>Disabled</code>. </p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/parameter-store/default-parameter-tier</code>, enter <code>Standard</code>,
-     *       <code>Advanced</code>, or <code>Intelligent-Tiering</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>For <code>/ssm/parameter-store/high-throughput-enabled</code>, enter <code>true</code> or
-     *       <code>false</code>.</p>
-     *             </li>
-     *          </ul>
-     * @public
-     */
-    SettingValue: string | undefined;
-}
-/**
- * <p>The result body of the UpdateServiceSetting API operation.</p>
- * @public
- */
-export interface UpdateServiceSettingResult {
-}
-/**
- * <p>Specifies the inventory type and attribute for the aggregation execution.</p>
- * @public
- */
-export interface InventoryAggregator {
-    /**
-     * <p>The inventory type and attribute name for aggregation.</p>
-     * @public
-     */
-    Expression?: string | undefined;
-    /**
-     * <p>Nested aggregators to further refine aggregation for an inventory type.</p>
-     * @public
-     */
-    Aggregators?: InventoryAggregator[] | undefined;
-    /**
-     * <p>A user-defined set of one or more filters on which to aggregate inventory data. Groups
-     *    return a count of resources that match and don't match the specified criteria.</p>
-     * @public
-     */
-    Groups?: InventoryGroup[] | undefined;
-}
-/**
- * <p>One or more aggregators for viewing counts of nodes using different
- *    dimensions.</p>
- * @public
- */
-export interface NodeAggregator {
-    /**
-     * <p>The aggregator type for limiting a node summary. Currently, only <code>Count</code> is
-     *    supported.</p>
-     * @public
-     */
-    AggregatorType: NodeAggregatorType | undefined;
-    /**
-     * <p>The data type name to use for viewing counts of nodes. Currently, only <code>Instance</code>
-     *    is supported.</p>
-     * @public
-     */
-    TypeName: NodeTypeName | undefined;
-    /**
-     * <p>The name of a node attribute on which to limit the count of nodes.</p>
-     * @public
-     */
-    AttributeName: NodeAttributeName | undefined;
-    /**
-     * <p>Information about aggregators used to refine a node summary.</p>
-     * @public
-     */
-    Aggregators?: NodeAggregator[] | undefined;
-}
-/**
- * <p>One or more aggregators for viewing counts of OpsData using different dimensions such as
- *     <code>Source</code>, <code>CreatedTime</code>, or <code>Source and CreatedTime</code>, to name a
- *    few.</p>
- * @public
- */
-export interface OpsAggregator {
-    /**
-     * <p>Either a <code>Range</code> or <code>Count</code> aggregator for limiting an OpsData
-     *    summary.</p>
-     * @public
-     */
-    AggregatorType?: string | undefined;
-    /**
-     * <p>The data type name to use for viewing counts of OpsData.</p>
-     * @public
-     */
-    TypeName?: string | undefined;
-    /**
-     * <p>The name of an OpsData attribute on which to limit the count of OpsData.</p>
-     * @public
-     */
-    AttributeName?: string | undefined;
-    /**
-     * <p>The aggregator value.</p>
-     * @public
-     */
-    Values?: Record<string, string> | undefined;
-    /**
-     * <p>The aggregator filters.</p>
-     * @public
-     */
-    Filters?: OpsFilter[] | undefined;
-    /**
-     * <p>A nested aggregator for viewing counts of OpsData.</p>
-     * @public
-     */
-    Aggregators?: OpsAggregator[] | undefined;
-}
-/**
- * @public
- */
-export interface GetInventoryRequest {
-    /**
-     * <p>One or more filters. Use a filter to return a more specific list of results.</p>
-     * @public
-     */
-    Filters?: InventoryFilter[] | undefined;
-    /**
-     * <p>Returns counts of inventory types based on one or more expressions. For example, if you
-     *    aggregate by using an expression that uses the <code>AWS:InstanceInformation.PlatformType</code>
-     *    type, you can see a count of how many Windows and Linux managed nodes exist in your inventoried
-     *    fleet.</p>
-     * @public
-     */
-    Aggregators?: InventoryAggregator[] | undefined;
-    /**
-     * <p>The list of inventory item types to return.</p>
-     * @public
-     */
-    ResultAttributes?: ResultAttribute[] | undefined;
-    /**
-     * <p>The token for the next set of items to return. (You received this token from a previous
-     *    call.)</p>
-     * @public
-     */
-    NextToken?: string | undefined;
-    /**
-     * <p>The maximum number of items to return for this call. The call also returns a token that you
-     *    can specify in a subsequent call to get the next set of results.</p>
-     * @public
-     */
-    MaxResults?: number | undefined;
-}
-/**
- * @public
- */
-export interface GetOpsSummaryRequest {
-    /**
-     * <p>Specify the name of a resource data sync to get.</p>
-     * @public
-     */
-    SyncName?: string | undefined;
-    /**
-     * <p>Optional filters used to scope down the returned OpsData. </p>
-     * @public
-     */
-    Filters?: OpsFilter[] | undefined;
-    /**
-     * <p>Optional aggregators that return counts of OpsData based on one or more expressions.</p>
-     * @public
-     */
-    Aggregators?: OpsAggregator[] | undefined;
-    /**
-     * <p>The OpsData data type to return.</p>
-     * @public
-     */
-    ResultAttributes?: OpsResultAttribute[] | undefined;
-    /**
-     * <p>A token to start the list. Use this token to get the next set of results. </p>
-     * @public
-     */
-    NextToken?: string | undefined;
-    /**
-     * <p>The maximum number of items to return for this call. The call also returns a token that you
-     *    can specify in a subsequent call to get the next set of results.</p>
-     * @public
-     */
-    MaxResults?: number | undefined;
-}
-/**
- * @public
- */
-export interface ListNodesSummaryRequest {
-    /**
-     * <p>The name of the Amazon Web Services managed resource data sync to retrieve information about.</p>
-     *          <p>For cross-account/cross-Region configurations, this parameter is required, and the name of
-     *    the supported resource data sync is <code>AWS-QuickSetup-ManagedNode</code>.</p>
-     *          <p>For single account/single-Region configurations, the parameter is not required.</p>
-     * @public
-     */
-    SyncName?: string | undefined;
-    /**
-     * <p>One or more filters. Use a filter to generate a summary that matches your specified filter
-     *    criteria.</p>
-     * @public
-     */
-    Filters?: NodeFilter[] | undefined;
-    /**
-     * <p>Specify one or more aggregators to return a count of managed nodes that match that
-     *    expression. For example, a count of managed nodes by operating system.</p>
-     * @public
-     */
-    Aggregators: NodeAggregator[] | undefined;
-    /**
-     * <p>The token for the next set of items to return. (You received this token from a previous
-     *    call.) The call also returns a token that you can specify in a subsequent call to get the next
-     *    set of results.</p>
-     * @public
-     */
-    NextToken?: string | undefined;
-    /**
-     * <p>The maximum number of items to return for this call. The call also returns a token that you
-     *    can specify in a subsequent call to get the next set of results.</p>
-     * @public
-     */
-    MaxResults?: number | undefined;
-}
-/**
- * @internal
- */
-export declare const RegisterTargetWithMaintenanceWindowRequestFilterSensitiveLog: (obj: RegisterTargetWithMaintenanceWindowRequest) => any;
-/**
- * @internal
- */
-export declare const RegisterTaskWithMaintenanceWindowRequestFilterSensitiveLog: (obj: RegisterTaskWithMaintenanceWindowRequest) => any;
-/**
- * @internal
- */
-export declare const SendCommandRequestFilterSensitiveLog: (obj: SendCommandRequest) => any;
-/**
- * @internal
- */
-export declare const SendCommandResultFilterSensitiveLog: (obj: SendCommandResult) => any;
-/**
- * @internal
- */
-export declare const UpdateAssociationRequestFilterSensitiveLog: (obj: UpdateAssociationRequest) => any;
-/**
- * @internal
- */
-export declare const UpdateAssociationResultFilterSensitiveLog: (obj: UpdateAssociationResult) => any;
-/**
- * @internal
- */
-export declare const UpdateAssociationStatusResultFilterSensitiveLog: (obj: UpdateAssociationStatusResult) => any;
-/**
- * @internal
- */
-export declare const UpdateMaintenanceWindowRequestFilterSensitiveLog: (obj: UpdateMaintenanceWindowRequest) => any;
-/**
- * @internal
- */
-export declare const UpdateMaintenanceWindowResultFilterSensitiveLog: (obj: UpdateMaintenanceWindowResult) => any;
-/**
- * @internal
- */
-export declare const UpdateMaintenanceWindowTargetRequestFilterSensitiveLog: (obj: UpdateMaintenanceWindowTargetRequest) => any;
-/**
- * @internal
- */
-export declare const UpdateMaintenanceWindowTargetResultFilterSensitiveLog: (obj: UpdateMaintenanceWindowTargetResult) => any;
-/**
- * @internal
- */
-export declare const UpdateMaintenanceWindowTaskRequestFilterSensitiveLog: (obj: UpdateMaintenanceWindowTaskRequest) => any;
-/**
- * @internal
- */
-export declare const UpdateMaintenanceWindowTaskResultFilterSensitiveLog: (obj: UpdateMaintenanceWindowTaskResult) => any;
-/**
- * @internal
- */
-export declare const UpdatePatchBaselineRequestFilterSensitiveLog: (obj: UpdatePatchBaselineRequest) => any;
-/**
- * @internal
- */
-export declare const UpdatePatchBaselineResultFilterSensitiveLog: (obj: UpdatePatchBaselineResult) => any;