@geastack/targets 0.1.79 → 0.1.81

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
package/README.md CHANGED
@@ -59,8 +59,8 @@ Controllers without an ESP32-S3 binding fail before compilation.
59
59
  Every chip role is optional, so a bare module composes too. Omit `chips.display`
60
60
  and the board is **headless**: `display_headless.cpp` gives it the same
61
61
  canvas-backed `Display` every target has, rasterizing into PSRAM and flushing to
62
- memory rather than a panel — the arrangement the native test host already runs
63
- the whole framework on. Omit `chips.touch` and it takes the no-op `Touchscreen`.
62
+ memory rather than a panel. The native test host runs the framework the same
63
+ way. Omit `chips.touch` and it takes the no-op `Touchscreen`.
64
64
  A definition also carries its own `flashSize` and `partitions`, because those
65
65
  are the module's geometry and not the base's.
66
66
 
@@ -68,7 +68,6 @@ See the `tutorials` repository's
68
68
  `embedded-tutorials/02-custom-board-composition` course for a complete target
69
69
  definition and firmware build.
70
70
 
71
-
72
71
  ## License
73
72
 
74
73
  This repo is the GeaStack **embedded board support** (ESP32, RP2350) and is
package/package.json CHANGED
@@ -1,6 +1,6 @@
1
1
  {
2
2
  "name": "@geastack/targets",
3
- "version": "0.1.79",
3
+ "version": "0.1.81",
4
4
  "description": "Native embedded build targets (ESP32-IDF, RP2350) for geastack apps: board sources, target catalog, and CMake glue driven by the gea CLI.",
5
5
  "license": "GPL-3.0-only",
6
6
  "repository": {
@@ -35,9 +35,9 @@
35
35
  "access": "public"
36
36
  },
37
37
  "dependencies": {
38
- "@geastack/chips": "^0.1.3",
38
+ "@geastack/chips": "^0.1.4",
39
39
  "@geastack/compiler": "^1.0.15",
40
- "@geastack/core": "^0.1.23",
40
+ "@geastack/core": "^0.1.24",
41
41
  "@geastack/elements": "^0.1.2",
42
42
  "@geastack/engine": "^0.1.5",
43
43
  "@geastack/geaos": "^0.1.3",
@@ -52,6 +52,21 @@ Concrete examples in the current tree:
52
52
  `gea::chips::qmi8658::Driver`.
53
53
  - `touch/ft3168.cpp` adapts ESP-IDF I2C, GPIO, interrupts, and task delivery to
54
54
  `gea::chips::ft3168::ControllerCore`.
55
+ - `touch/gt911.cpp` does the same for `gea::chips::gt911::ControllerCore`, and
56
+ also answers the `Touchscreen` surface itself, so a composed board links it
57
+ with no board-local glue. Its reset line may be a GPIO or a pin on the
58
+ board's I/O expander; INT is driven low across reset to fix the I2C address.
59
+ - `displays/rgb_panel.cpp` is a whole `Display` for a bare parallel RGB (DPI)
60
+ panel: the S3's LCD peripheral scans a PSRAM framebuffer out and there is no
61
+ controller to talk to, so it does not sit behind `qspi_panel.h`. Timings and
62
+ pins come from `board::display` (an `RgbPanelDisplayConfig`); the backlight
63
+ is a LEDC-driven GPIO or an expander pin.
64
+ - `expanders/io_expander.h` is the interface for a board's I/O expander --
65
+ the slow control lines (backlight enable, touch and panel resets) a board
66
+ ran out of GPIOs for. `expanders/ch422g.cpp` implements it over
67
+ `gea::chips::ch422g::Driver`; `board::expander` names which expander pin
68
+ carries which line, and bindings that need a line guard on
69
+ `GEA_BOARD_HAS_EXPANDER`.
55
70
 
56
71
  If a future non-ESP board uses one of those chips, it should implement the same
57
72
  small bus/runtime interfaces in its own target folder and reuse the code under