@geastack/targets 0.1.77
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- package/LICENSE +674 -0
- package/README.md +83 -0
- package/package.json +50 -0
- package/targets/cmake/geatsc-generated-archive-build.mjs +614 -0
- package/targets/cmake/geatsc_generated_archive.cmake +116 -0
- package/targets/cmake/geatsc_generated_archive_build.cmake +50 -0
- package/targets/esp32/app_project.cmake +33 -0
- package/targets/esp32/apps/app_manager.cpp +188 -0
- package/targets/esp32/apps/app_manager.h +10 -0
- package/targets/esp32/chip_bindings/README.md +58 -0
- package/targets/esp32/chip_bindings/audio/es8311.cpp +556 -0
- package/targets/esp32/chip_bindings/displays/co5300.cpp +510 -0
- package/targets/esp32/chip_bindings/displays/co5300.h +47 -0
- package/targets/esp32/chip_bindings/displays/co5300_async_stream.inc +79 -0
- package/targets/esp32/chip_bindings/displays/qspi_panel.h +65 -0
- package/targets/esp32/chip_bindings/displays/sh8601.cpp +583 -0
- package/targets/esp32/chip_bindings/displays/sh8601.h +36 -0
- package/targets/esp32/chip_bindings/gps/lc76g.cpp +296 -0
- package/targets/esp32/chip_bindings/gps/lc76g.h +7 -0
- package/targets/esp32/chip_bindings/imu/bmi270.cpp +299 -0
- package/targets/esp32/chip_bindings/imu/bmi270_config.inl +439 -0
- package/targets/esp32/chip_bindings/imu/qmi8658.cpp +213 -0
- package/targets/esp32/chip_bindings/power/axp2101.cpp +185 -0
- package/targets/esp32/chip_bindings/touch/cst9217.cpp +229 -0
- package/targets/esp32/chip_bindings/touch/cst9217_controller.h +78 -0
- package/targets/esp32/chip_bindings/touch/ft3168.cpp +340 -0
- package/targets/esp32/chip_bindings/touch/ft3168_controller.h +103 -0
- package/targets/esp32/chip_bindings/touch/ft6336.cpp +310 -0
- package/targets/esp32/chip_bindings/touch/ft6336_controller.h +90 -0
- package/targets/esp32/components/gea_framework/CMakeLists.txt +62 -0
- package/targets/esp32/connectivity/ble_hid.cpp +2916 -0
- package/targets/esp32/connectivity/ble_hid.h +8 -0
- package/targets/esp32/connectivity/diagnostics_transport.cpp +523 -0
- package/targets/esp32/connectivity/diagnostics_transport_offline.cpp +108 -0
- package/targets/esp32/connectivity/wifi.cpp +615 -0
- package/targets/esp32/connectivity/wifi_debug_offline.cpp +37 -0
- package/targets/esp32/connectivity/wifi_task_stack.h +119 -0
- package/targets/esp32/display.cpp +6010 -0
- package/targets/esp32/display_headless.cpp +468 -0
- package/targets/esp32/gea/platform_random.h +11 -0
- package/targets/esp32/gea_framework.cmake +382 -0
- package/targets/esp32/gpio.cpp +229 -0
- package/targets/esp32/host_sources.cmake +35 -0
- package/targets/esp32/imu_absent.cpp +36 -0
- package/targets/esp32/ldfragments/gea_ui_state_external.lf +35 -0
- package/targets/esp32/memory_config.h +64 -0
- package/targets/esp32/power_absent.cpp +22 -0
- package/targets/esp32/sdk-patches/0001-esp_ptr_dma_capable-accept-PSRAM.patch +70 -0
- package/targets/esp32/sdk-patches/0002-gdma-access_ext_mem-spi_master.patch +59 -0
- package/targets/esp32/sdk-patches/README.md +127 -0
- package/targets/esp32/services/app_runner.cpp +248 -0
- package/targets/esp32/services/app_state.cpp +56 -0
- package/targets/esp32/services/audio_runtime_stub.cpp +86 -0
- package/targets/esp32/services/battery_service.cpp +31 -0
- package/targets/esp32/services/device_control.cpp +1896 -0
- package/targets/esp32/services/device_control.h +31 -0
- package/targets/esp32/services/frame_scheduler.cpp +1571 -0
- package/targets/esp32/services/heap.cpp +129 -0
- package/targets/esp32/services/memory.cpp +103 -0
- package/targets/esp32/services/ota.cpp +840 -0
- package/targets/esp32/services/ota_image.cpp +162 -0
- package/targets/esp32/services/ota_image.h +16 -0
- package/targets/esp32/services/storage_service.cpp +159 -0
- package/targets/esp32/touch_absent.cpp +44 -0
- package/targets/esp32-m5stack-m5paper/CMakeLists.txt +10 -0
- package/targets/esp32-m5stack-m5paper/README.md +55 -0
- package/targets/esp32-m5stack-m5paper/dependencies.lock +76 -0
- package/targets/esp32-m5stack-m5paper/main/CMakeLists.txt +46 -0
- package/targets/esp32-m5stack-m5paper/main/Kconfig.projbuild +10 -0
- package/targets/esp32-m5stack-m5paper/main/app_main.cpp +114 -0
- package/targets/esp32-m5stack-m5paper/main/audio_stub.cpp +27 -0
- package/targets/esp32-m5stack-m5paper/main/buttons.cpp +111 -0
- package/targets/esp32-m5stack-m5paper/main/display.cpp +1074 -0
- package/targets/esp32-m5stack-m5paper/main/i2c.cpp +36 -0
- package/targets/esp32-m5stack-m5paper/main/idf_component.yml +7 -0
- package/targets/esp32-m5stack-m5paper/main/imu_stub.cpp +20 -0
- package/targets/esp32-m5stack-m5paper/main/include/board.h +100 -0
- package/targets/esp32-m5stack-m5paper/main/include/buttons.h +8 -0
- package/targets/esp32-m5stack-m5paper/main/launcher_button.cpp +82 -0
- package/targets/esp32-m5stack-m5paper/main/m5paper_psram.lf +20 -0
- package/targets/esp32-m5stack-m5paper/main/power.cpp +73 -0
- package/targets/esp32-m5stack-m5paper/main/sdcard_mount.cpp +82 -0
- package/targets/esp32-m5stack-m5paper/main/touch.cpp +279 -0
- package/targets/esp32-m5stack-m5paper/partitions.csv +9 -0
- package/targets/esp32-m5stack-m5paper/sdkconfig.defaults +84 -0
- package/targets/esp32-p4-m5stack-tab5/CMakeLists.txt +10 -0
- package/targets/esp32-p4-m5stack-tab5/dependencies.lock +276 -0
- package/targets/esp32-p4-m5stack-tab5/main/CMakeLists.txt +586 -0
- package/targets/esp32-p4-m5stack-tab5/main/Kconfig.projbuild +12 -0
- package/targets/esp32-p4-m5stack-tab5/main/app_main.cpp +177 -0
- package/targets/esp32-p4-m5stack-tab5/main/camera.cpp +2025 -0
- package/targets/esp32-p4-m5stack-tab5/main/display.cpp +4033 -0
- package/targets/esp32-p4-m5stack-tab5/main/fatfs_ffconf.h +383 -0
- package/targets/esp32-p4-m5stack-tab5/main/i2c.cpp +39 -0
- package/targets/esp32-p4-m5stack-tab5/main/idf_component.yml +21 -0
- package/targets/esp32-p4-m5stack-tab5/main/include/board.h +130 -0
- package/targets/esp32-p4-m5stack-tab5/main/include/tab5_drivers.h +68 -0
- package/targets/esp32-p4-m5stack-tab5/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-p4-m5stack-tab5/main/launcher_button.cpp +188 -0
- package/targets/esp32-p4-m5stack-tab5/main/power.cpp +22 -0
- package/targets/esp32-p4-m5stack-tab5/main/sdcard_mount.cpp +125 -0
- package/targets/esp32-p4-m5stack-tab5/main/tab5_audio.cpp +345 -0
- package/targets/esp32-p4-m5stack-tab5/main/tab5_drivers.cpp +871 -0
- package/targets/esp32-p4-m5stack-tab5/main/tab5_imu.cpp +246 -0
- package/targets/esp32-p4-m5stack-tab5/main/touch.cpp +206 -0
- package/targets/esp32-p4-m5stack-tab5/partitions.csv +12 -0
- package/targets/esp32-p4-m5stack-tab5/sdkconfig.defaults +128 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/CMakeLists.txt +19 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/component-patches/0001-esp_video-csi-raw-passthrough-p4-rev-lt-v3.patch +28 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/component-patches/README.md +45 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/component-patches/apply.sh +37 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/dependencies.lock +196 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/CMakeLists.txt +562 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/Kconfig.projbuild +12 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/app_main.cpp +166 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/camera.cpp +2105 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/display.cpp +1730 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/fatfs_ffconf.h +383 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/i2c.cpp +39 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/idf_component.yml +11 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/include/board.h +87 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/include/panel_native.h +59 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/launcher_button.cpp +191 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/power.cpp +15 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/main/touch.cpp +306 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/partitions.csv +13 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/patches/README.md +22 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/patches/espressif__esp_video-csi-bypass.patch +28 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/sdkconfig.defaults +109 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/tools/README-camera-capture.md +84 -0
- package/targets/esp32-p4-waveshare-touch-lcd-3.5/tools/capture-camera.py +369 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/CMakeLists.txt +10 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/dependencies.lock +258 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/CMakeLists.txt +577 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/Kconfig.projbuild +12 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/app_main.cpp +177 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/camera.cpp +1935 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/display.cpp +2832 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/fatfs_ffconf.h +383 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/i2c.cpp +39 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/idf_component.yml +23 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/include/board.h +68 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/launcher_button.cpp +191 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/power.cpp +15 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/sdcard_mount.cpp +125 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/main/touch.cpp +332 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/partitions.csv +12 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/sdkconfig.defaults +122 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/tools/README-camera-capture.md +84 -0
- package/targets/esp32-p4-waveshare-touch-lcd-7/tools/capture-camera.py +369 -0
- package/targets/esp32-s3-devkit-n16r8.json +31 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/CMakeLists.txt +10 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/dependencies.lock +40 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/CMakeLists.txt +549 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/app_main.cpp +187 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/display_rgb.cpp +1338 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/i2c.cpp +39 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/idf_component.yml +5 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/include/board.h +142 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/include/pcf8574.h +16 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/include/rotary_encoder.h +7 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/launcher_button.cpp +191 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/pcf8574.cpp +86 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/platform_stubs.cpp +47 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/rotary_encoder.cpp +135 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/main/touch.cpp +250 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/partitions.csv +8 -0
- package/targets/esp32-s3-elecrow-rotary-2.1/sdkconfig.defaults +116 -0
- package/targets/esp32-s3-epaper-1.54/CMakeLists.txt +10 -0
- package/targets/esp32-s3-epaper-1.54/dependencies.lock +76 -0
- package/targets/esp32-s3-epaper-1.54/main/CMakeLists.txt +691 -0
- package/targets/esp32-s3-epaper-1.54/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-epaper-1.54/main/app_main.cpp +181 -0
- package/targets/esp32-s3-epaper-1.54/main/buttons.cpp +144 -0
- package/targets/esp32-s3-epaper-1.54/main/display.cpp +1281 -0
- package/targets/esp32-s3-epaper-1.54/main/fatfs_ffconf.h +377 -0
- package/targets/esp32-s3-epaper-1.54/main/i2c.cpp +39 -0
- package/targets/esp32-s3-epaper-1.54/main/idf_component.yml +7 -0
- package/targets/esp32-s3-epaper-1.54/main/imu_stub.cpp +21 -0
- package/targets/esp32-s3-epaper-1.54/main/include/board.h +119 -0
- package/targets/esp32-s3-epaper-1.54/main/include/buttons.h +9 -0
- package/targets/esp32-s3-epaper-1.54/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-s3-epaper-1.54/main/launcher_button.cpp +191 -0
- package/targets/esp32-s3-epaper-1.54/main/power.cpp +15 -0
- package/targets/esp32-s3-epaper-1.54/main/sdcard_mount.cpp +89 -0
- package/targets/esp32-s3-epaper-1.54/main/touch.cpp +299 -0
- package/targets/esp32-s3-epaper-1.54/partitions.csv +8 -0
- package/targets/esp32-s3-epaper-1.54/sdkconfig.defaults +217 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/CMakeLists.txt +10 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/README.md +29 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/dependencies.lock +116 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/main/CMakeLists.txt +90 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/main/idf_component.yml +7 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/main/include/board.h +61 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/main/touch.cpp +299 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/partitions.csv +7 -0
- package/targets/esp32-s3-lilygo-t-display-s3-long/sdkconfig.defaults +50 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/CMakeLists.txt +12 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/CMakeLists.txt +17 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/ed047tc1.c +269 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/ed047tc1.h +142 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/epd_driver.c +1114 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/epd_driver.h +410 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/gea_epd.c +989 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/i2s_data_bus.c +489 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/i2s_data_bus.h +104 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/rmt_pulse.c +136 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/rmt_pulse.h +78 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/components/epd_driver/utilities.h +49 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/dependencies.lock +35 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/CMakeLists.txt +30 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/Kconfig.projbuild +10 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/app_main.cpp +95 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/audio_stub.cpp +27 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/buttons.cpp +40 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/display.cpp +627 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/i2c.cpp +36 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/idf_component.yml +4 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/imu_stub.cpp +20 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/include/board.h +85 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/include/buttons.h +8 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/launcher_button.cpp +82 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/power.cpp +36 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/sdcard_mount.cpp +90 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/main/touch.cpp +293 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/partitions.csv +9 -0
- package/targets/esp32-s3-lilygo-t5-epaper-4.7/sdkconfig.defaults +217 -0
- package/targets/esp32-s3-m5stack-papers3/CMakeLists.txt +13 -0
- package/targets/esp32-s3-m5stack-papers3/components/papers3_epd/CMakeLists.txt +5 -0
- package/targets/esp32-s3-m5stack-papers3/components/papers3_epd/include/papers3_epd.h +74 -0
- package/targets/esp32-s3-m5stack-papers3/components/papers3_epd/papers3_epd.c +671 -0
- package/targets/esp32-s3-m5stack-papers3/dependencies.lock +76 -0
- package/targets/esp32-s3-m5stack-papers3/main/CMakeLists.txt +64 -0
- package/targets/esp32-s3-m5stack-papers3/main/Kconfig.projbuild +10 -0
- package/targets/esp32-s3-m5stack-papers3/main/app_main.cpp +96 -0
- package/targets/esp32-s3-m5stack-papers3/main/audio_stub.cpp +27 -0
- package/targets/esp32-s3-m5stack-papers3/main/buttons.cpp +49 -0
- package/targets/esp32-s3-m5stack-papers3/main/display.cpp +706 -0
- package/targets/esp32-s3-m5stack-papers3/main/i2c.cpp +36 -0
- package/targets/esp32-s3-m5stack-papers3/main/idf_component.yml +14 -0
- package/targets/esp32-s3-m5stack-papers3/main/imu.cpp +351 -0
- package/targets/esp32-s3-m5stack-papers3/main/include/board.h +101 -0
- package/targets/esp32-s3-m5stack-papers3/main/include/buttons.h +8 -0
- package/targets/esp32-s3-m5stack-papers3/main/launcher_button.cpp +96 -0
- package/targets/esp32-s3-m5stack-papers3/main/power.cpp +102 -0
- package/targets/esp32-s3-m5stack-papers3/main/sdcard_mount.cpp +88 -0
- package/targets/esp32-s3-m5stack-papers3/main/touch.cpp +287 -0
- package/targets/esp32-s3-m5stack-papers3/partitions.csv +9 -0
- package/targets/esp32-s3-m5stack-papers3/sdkconfig.defaults +232 -0
- package/targets/esp32-s3-m5stack-sticks3/CMakeLists.txt +10 -0
- package/targets/esp32-s3-m5stack-sticks3/dependencies.lock +51 -0
- package/targets/esp32-s3-m5stack-sticks3/main/CMakeLists.txt +51 -0
- package/targets/esp32-s3-m5stack-sticks3/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-m5stack-sticks3/main/app_main.cpp +130 -0
- package/targets/esp32-s3-m5stack-sticks3/main/buttons.cpp +101 -0
- package/targets/esp32-s3-m5stack-sticks3/main/display.cpp +1391 -0
- package/targets/esp32-s3-m5stack-sticks3/main/i2c.cpp +39 -0
- package/targets/esp32-s3-m5stack-sticks3/main/idf_component.yml +8 -0
- package/targets/esp32-s3-m5stack-sticks3/main/imu_stub.cpp +9 -0
- package/targets/esp32-s3-m5stack-sticks3/main/include/board.h +89 -0
- package/targets/esp32-s3-m5stack-sticks3/main/include/buttons.h +9 -0
- package/targets/esp32-s3-m5stack-sticks3/main/launcher_button.cpp +191 -0
- package/targets/esp32-s3-m5stack-sticks3/main/power.cpp +15 -0
- package/targets/esp32-s3-m5stack-sticks3/main/sdcard_mount.cpp +8 -0
- package/targets/esp32-s3-m5stack-sticks3/main/touch.cpp +65 -0
- package/targets/esp32-s3-m5stack-sticks3/partitions.csv +8 -0
- package/targets/esp32-s3-m5stack-sticks3/sdkconfig.defaults +130 -0
- package/targets/esp32-s3-touch-amoled-1.75/CMakeLists.txt +10 -0
- package/targets/esp32-s3-touch-amoled-1.75/dependencies.lock +130 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/CMakeLists.txt +589 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/app_main.cpp +153 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/i2c.cpp +39 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/idf_component.yml +9 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/include/board.h +110 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/launcher_button.cpp +191 -0
- package/targets/esp32-s3-touch-amoled-1.75/main/touch.cpp +45 -0
- package/targets/esp32-s3-touch-amoled-1.75/partitions.csv +8 -0
- package/targets/esp32-s3-touch-amoled-1.75/sdkconfig.defaults +179 -0
- package/targets/esp32-s3-touch-amoled-1.8/CMakeLists.txt +10 -0
- package/targets/esp32-s3-touch-amoled-1.8/dependencies.lock +105 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/CMakeLists.txt +768 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/app_main.cpp +172 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/i2c.cpp +39 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/idf_component.yml +8 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/include/board.h +83 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/launcher_button.cpp +191 -0
- package/targets/esp32-s3-touch-amoled-1.8/main/touch.cpp +41 -0
- package/targets/esp32-s3-touch-amoled-1.8/partitions.csv +8 -0
- package/targets/esp32-s3-touch-amoled-1.8/sdkconfig.defaults +179 -0
- package/targets/esp32-s3-touch-amoled-2.06/CMakeLists.txt +10 -0
- package/targets/esp32-s3-touch-amoled-2.06/dependencies.lock +64 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/CMakeLists.txt +1121 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/app_main.cpp +333 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/i2c.cpp +39 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/idf_component.yml +27 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/include/board.h +114 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/launcher_button.cpp +199 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/sdcard_mount.cpp +105 -0
- package/targets/esp32-s3-touch-amoled-2.06/main/touch.cpp +49 -0
- package/targets/esp32-s3-touch-amoled-2.06/partitions.csv +14 -0
- package/targets/esp32-s3-touch-amoled-2.06/sdkconfig.defaults +273 -0
- package/targets/esp32-s3-touch-amoled-2.41/CMakeLists.txt +10 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/CMakeLists.txt +71 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/Kconfig.projbuild +12 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/idf_component.yml +27 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/include/board.h +108 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/include/wifi_config.h.example +5 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/panel_reset.cpp +82 -0
- package/targets/esp32-s3-touch-amoled-2.41/main/touch.cpp +49 -0
- package/targets/esp32-s3-touch-amoled-2.41/partitions.csv +8 -0
- package/targets/esp32-s3-touch-amoled-2.41/sdkconfig.defaults +273 -0
- package/targets/rp2350-tufty-2350/CMakeLists.txt +348 -0
- package/targets/rp2350-tufty-2350/README.md +53 -0
- package/targets/rp2350-tufty-2350/boards/pimoroni_tufty2350.h +87 -0
- package/targets/rp2350-tufty-2350/main/bringup.cpp +187 -0
- package/targets/rp2350-tufty-2350/main/include/board.h +124 -0
- package/targets/rp2350-tufty-2350/main/rp2350_panel.cpp +428 -0
- package/targets/rp2350-tufty-2350/main/rp2350_panel.h +46 -0
- package/targets/rp2350-tufty-2350/main/st7789_parallel.pio +7 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/CMakeLists.txt +345 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/README.md +153 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/boards/waveshare_rp2350_touch_amoled_2_41.h +59 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/app.cpp +984 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/bringup.cpp +222 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/include/board.h +138 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/rp2350_gea_platform.cpp +2553 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/rp2350_gea_platform.h +18 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/rp2350_host_fetch_stub.cpp +64 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/rp2350_panel.cpp +677 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/rp2350_panel.h +48 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/vendor/waveshare_psram/rp_pico_alloc.c +354 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/vendor/waveshare_psram/rp_pico_alloc.h +56 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/vendor/waveshare_psram/tlsf/tlsf.c +1284 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/vendor/waveshare_psram/tlsf/tlsf.h +95 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/vendor/waveshare_psram/tlsf/tlsf_block_functions.h +123 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/main/vendor/waveshare_psram/tlsf/tlsf_common.h +127 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/tools/rp2350-scroll-bench.py +162 -0
- package/targets/rp2350-waveshare-touch-amoled-2.41/tools/rp2350-scroll-parity.py +198 -0
- package/targets.json +154 -0
|
@@ -0,0 +1,122 @@
|
|
|
1
|
+
# Target: ESP32-P4
|
|
2
|
+
CONFIG_IDF_TARGET="esp32p4"
|
|
3
|
+
CONFIG_IDF_TARGET_ESP32P4=y
|
|
4
|
+
|
|
5
|
+
# Flash: 32 MB (Waveshare ESP32-P4-WIFI6-Touch-LCD-7)
|
|
6
|
+
CONFIG_ESPTOOLPY_FLASHSIZE_32MB=y
|
|
7
|
+
CONFIG_ESPTOOLPY_FLASHFREQ_40M=y
|
|
8
|
+
|
|
9
|
+
# The first Waveshare ESP32-P4-WIFI6-Touch-LCD-7 unit reports ESP32-P4 rev
|
|
10
|
+
# v1.3. ESP-IDF defaults to rev v3.1+, whose bootloader rejects this board.
|
|
11
|
+
CONFIG_ESP32P4_SELECTS_REV_LESS_V3=y
|
|
12
|
+
CONFIG_ESP32P4_REV_MIN_100=y
|
|
13
|
+
CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_360=y
|
|
14
|
+
|
|
15
|
+
# Keep the console on UART0 (USB-JTAG stays secondary); the ESP32-P4 USB Serial/JTAG
|
|
16
|
+
# bootloader console init path hangs on the Waveshare rev v1.3 board during early
|
|
17
|
+
# bring-up, so UART must remain primary. Use CUSTOM (default pins via GPIO=-1) so the
|
|
18
|
+
# baud is settable: stdout is mirrored to UART0 + USB-JTAG and the write blocks on the
|
|
19
|
+
# slower UART, so the camera-capture base64 stream (multi-MB) is gated by this baud.
|
|
20
|
+
# 921600 makes it ~8x faster; the host reads the baud-agnostic USB-JTAG side.
|
|
21
|
+
CONFIG_ESP_CONSOLE_UART_CUSTOM=y
|
|
22
|
+
CONFIG_ESP_CONSOLE_UART_TX_GPIO=-1
|
|
23
|
+
CONFIG_ESP_CONSOLE_UART_RX_GPIO=-1
|
|
24
|
+
CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG=y
|
|
25
|
+
CONFIG_ESP_CONSOLE_UART_BAUDRATE=921600
|
|
26
|
+
|
|
27
|
+
# Custom partition table with two OTA slots and installable app storage.
|
|
28
|
+
CONFIG_PARTITION_TABLE_CUSTOM=y
|
|
29
|
+
CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"
|
|
30
|
+
|
|
31
|
+
# Runtime timing and task budgets. The P4 creates its two IPC tasks before the
|
|
32
|
+
# IDF main task; keeping IPC at the older S3 16 KiB value fragments internal
|
|
33
|
+
# SRAM enough that the 32 KiB main stack cannot be allocated at startup.
|
|
34
|
+
CONFIG_FREERTOS_HZ=1000
|
|
35
|
+
CONFIG_ESP_MAIN_TASK_STACK_SIZE=32768
|
|
36
|
+
CONFIG_ESP_IPC_TASK_STACK_SIZE=4096
|
|
37
|
+
|
|
38
|
+
# External PSRAM is required for the 720x1280 RGB565 framebuffer and staging
|
|
39
|
+
# buffers. Keep internal memory globally allocatable; code asks for DMA/internal
|
|
40
|
+
# caps explicitly when needed.
|
|
41
|
+
CONFIG_SPIRAM=y
|
|
42
|
+
CONFIG_SPIRAM_SPEED_200M=y
|
|
43
|
+
CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y
|
|
44
|
+
CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=0
|
|
45
|
+
CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=0
|
|
46
|
+
|
|
47
|
+
# WiFi runs on the onboard ESP32-C6 over esp_hosted SDIO. Allocate the SDIO
|
|
48
|
+
# transport mempool from DMA-capable PSRAM (the P4 GDMA reaches PSRAM through
|
|
49
|
+
# cache) instead of scarce internal DMA RAM, which the 720x1280 framebuffers
|
|
50
|
+
# already pressure. Without this, sdio_mempool_create asserts (buf_mp_g null) and
|
|
51
|
+
# the board boot-loops the moment WiFi is enabled.
|
|
52
|
+
CONFIG_ESP_HOSTED_MEMPOOL_PREFER_SPIRAM=y
|
|
53
|
+
# Also place esp_hosted's own task stacks (RPC + default worker) in SPIRAM. The
|
|
54
|
+
# WiFi blob lives on the C6, so the P4 host tasks don't need internal RAM; this
|
|
55
|
+
# keeps boot-time internal-SRAM free so the 32 KiB main-task stack still fits
|
|
56
|
+
# (otherwise esp_startup_start_app asserts res==pdTRUE and boot-loops).
|
|
57
|
+
CONFIG_ESP_HOSTED_DFLT_TASK_FROM_SPIRAM=y
|
|
58
|
+
|
|
59
|
+
# Camera: Waveshare's ESP32-P4-WIFI6-Touch-LCD-X examples use the onboard
|
|
60
|
+
# OV5647 over MIPI-CSI through the esp_video ISP pipeline.
|
|
61
|
+
CONFIG_IDF_EXPERIMENTAL_FEATURES=y
|
|
62
|
+
CONFIG_CAMERA_OV5647=y
|
|
63
|
+
# Preview-optimised capture: the OV5647 2x2-binning mode, 1280x960 RAW10 45fps
|
|
64
|
+
# (index 4). Binning halves the sensor readout + ISP/PPA scale data vs 1920x1080
|
|
65
|
+
# 30fps and lowers noise, so the live preview streams faster and brighter. The
|
|
66
|
+
# sensor mode is global, so stills and the H.264 clip also capture at 1280x960
|
|
67
|
+
# (still within the P4 hardware encoder's 1920x1080 max). Switch back to index 3
|
|
68
|
+
# (1920x1080 30fps) below if full-1080p stills/recording matter more than preview.
|
|
69
|
+
CONFIG_CAMERA_OV5647_MIPI_RAW10_1280x960_BINNING_45FPS=y
|
|
70
|
+
CONFIG_CAMERA_OV5647_MIPI_IF_FORMAT_INDEX_DAFAULT=4
|
|
71
|
+
CONFIG_ESP_VIDEO_ENABLE_ISP_PIPELINE_CONTROLLER=y
|
|
72
|
+
# Hardware H.264 encoder exposed as a V4L2 M2M device (/dev/video11) for the
|
|
73
|
+
# full-resolution 1080p video recording path (Camera.recordH264Clip).
|
|
74
|
+
CONFIG_ESP_VIDEO_ENABLE_H264_VIDEO_DEVICE=y
|
|
75
|
+
CONFIG_ESP_VIDEO_ENABLE_HW_H264_VIDEO_DEVICE=y
|
|
76
|
+
# esp_video registers several /dev/video* VFS entries; with the console + the
|
|
77
|
+
# /sdcard FAT mount the default cap of 8 is exhausted (mount fails with NO_MEM).
|
|
78
|
+
CONFIG_VFS_MAX_COUNT=16
|
|
79
|
+
# microSD cards use 512-byte logical sectors; IDF's FATFS defaults to 4096 (for the
|
|
80
|
+
# on-flash wear-levelled FAT), which fails to mount an SD card (FR_NO_FILESYSTEM).
|
|
81
|
+
CONFIG_FATFS_SECTOR_512=y
|
|
82
|
+
# exFAT support is enabled in ffconf.h (FF_FS_EXFAT=1) so the board can read exFAT
|
|
83
|
+
# microSD cards; the exFAT code path references FF_USE_LABEL as a C value, so the
|
|
84
|
+
# volume-label option must be defined (it's "not set" => undefined => won't compile).
|
|
85
|
+
CONFIG_FATFS_USE_LABEL=y
|
|
86
|
+
# CONFIG_ESP_H264_DECODER_IRAM is not set
|
|
87
|
+
|
|
88
|
+
# WebRTC: mbedTLS DTLS + DTLS-SRTP for esp_peer.
|
|
89
|
+
CONFIG_MBEDTLS_SSL_PROTO_DTLS=y
|
|
90
|
+
CONFIG_MBEDTLS_SSL_DTLS_SRTP=y
|
|
91
|
+
CONFIG_MBEDTLS_SSL_DTLS_CONNECTION_ID=y
|
|
92
|
+
CONFIG_MBEDTLS_X509_CREATE_C=y
|
|
93
|
+
CONFIG_MBEDTLS_X509_CRT_WRITE_C=y
|
|
94
|
+
CONFIG_MBEDTLS_X509_CSR_WRITE_C=y
|
|
95
|
+
|
|
96
|
+
# Release optimization level for the large display workload.
|
|
97
|
+
CONFIG_COMPILER_OPTIMIZATION_PERF=y
|
|
98
|
+
CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y
|
|
99
|
+
CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2
|
|
100
|
+
|
|
101
|
+
# Development logging / diagnostics defaults.
|
|
102
|
+
# CONFIG_GEA_EMBEDDED_PRODUCTION_LOCKDOWN is not set
|
|
103
|
+
# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set
|
|
104
|
+
CONFIG_LOG_DEFAULT_LEVEL_INFO=y
|
|
105
|
+
CONFIG_LOG_DEFAULT_LEVEL=3
|
|
106
|
+
CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y
|
|
107
|
+
CONFIG_LOG_MAXIMUM_LEVEL=3
|
|
108
|
+
# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set
|
|
109
|
+
CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y
|
|
110
|
+
CONFIG_BOOTLOADER_LOG_LEVEL=3
|
|
111
|
+
|
|
112
|
+
# Keep standalone heap tracing available for framebuffer/app-init diagnosis.
|
|
113
|
+
# Heap tracing costs about a kilobyte of IRAM and puts a hook on the allocator's
|
|
114
|
+
# hot path. The framework's only users, the display and AXP2101 init traces, are
|
|
115
|
+
# already gated on GEA_EMBEDDED_HEAP_DIAGNOSTICS_LOG, which defaults to 0, so
|
|
116
|
+
# nothing traced by default and every app paid for it. Turn this and that macro
|
|
117
|
+
# on together when you actually want a trace.
|
|
118
|
+
CONFIG_HEAP_TRACING_OFF=y
|
|
119
|
+
# CONFIG_HEAP_TRACING_STANDALONE is not set
|
|
120
|
+
# CONFIG_HEAP_TRACING_TOHOST is not set
|
|
121
|
+
# CONFIG_HEAP_TRACING is not set
|
|
122
|
+
# CONFIG_HEAP_TRACE_HASH_MAP is not set
|
|
@@ -0,0 +1,84 @@
|
|
|
1
|
+
# ESP32-P4 full-resolution camera capture (to SD card)
|
|
2
|
+
|
|
3
|
+
Captures a **full-resolution (1920×1080) still** and a **1080p H.264 video** from the
|
|
4
|
+
Waveshare ESP32-P4's OV5647 camera using the board's **hardware JPEG / H.264
|
|
5
|
+
encoders**, writes them to the **microSD card**, then pulls the on-card files off
|
|
6
|
+
over the USB-serial console with a **chunked, CRC-verified transfer** — the pulled
|
|
7
|
+
files are bit-perfect copies of what's on the card.
|
|
8
|
+
|
|
9
|
+
## Quick start
|
|
10
|
+
|
|
11
|
+
```bash
|
|
12
|
+
# Build + flash the camera-studio app (1920x1080 sensor mode + HW H.264 + SD)
|
|
13
|
+
npx gea build --board waveshare-p4-7 --app camera-studio
|
|
14
|
+
npx gea flash --board waveshare-p4-7 --app camera-studio
|
|
15
|
+
|
|
16
|
+
# Capture a still + a 10s clip into targets/.../captures/
|
|
17
|
+
python3 targets/esp32-p4-waveshare-touch-lcd-7/tools/capture-camera.py
|
|
18
|
+
|
|
19
|
+
# Options
|
|
20
|
+
python3 tools/capture-camera.py --still-only
|
|
21
|
+
python3 tools/capture-camera.py --clip-only --seconds 10
|
|
22
|
+
```
|
|
23
|
+
|
|
24
|
+
Outputs (host copies; the originals also remain on the SD card as `/sdcard/frame.jpg`
|
|
25
|
+
and `/sdcard/clip.h264`):
|
|
26
|
+
- `captures/frame_<ts>.jpg` — 1920×1080 hardware-JPEG still (~750 KB)
|
|
27
|
+
- `captures/clip_<ts>.h264` — 1080p hardware-H.264 elementary stream
|
|
28
|
+
- `captures/clip_<ts>.mp4` — remuxed with ffmpeg (if installed), plays anywhere
|
|
29
|
+
|
|
30
|
+
## How it works
|
|
31
|
+
|
|
32
|
+
**Sensor / encoders / SD** (`sdkconfig` / `sdkconfig.defaults`):
|
|
33
|
+
- `CONFIG_CAMERA_OV5647_MIPI_RAW10_1920x1080_30FPS` — the OV5647 driver's max mode
|
|
34
|
+
(no higher/5MP mode exists), so 1080p is "full resolution" here.
|
|
35
|
+
- `CONFIG_ESP_VIDEO_ENABLE_HW_H264_VIDEO_DEVICE` — the P4 HW H.264 encoder as a V4L2
|
|
36
|
+
M2M device at `/dev/video11`.
|
|
37
|
+
- `CONFIG_ESP_CONSOLE_UART_CUSTOM` + `…_BAUDRATE=921600` — fast console so the pull
|
|
38
|
+
isn't UART-bound (host reads the baud-agnostic USB-JTAG side via the `IOSSIOSPEED`
|
|
39
|
+
ioctl).
|
|
40
|
+
- `CONFIG_VFS_MAX_COUNT=16` — esp_video registers several `/dev/video*` VFS entries;
|
|
41
|
+
the default of 8 leaves no slot for the `/sdcard` mount.
|
|
42
|
+
- `CONFIG_FATFS_SECTOR_512=y` + `CONFIG_FATFS_USE_LABEL=y` — SD cards use 512-byte
|
|
43
|
+
sectors (IDF defaults to 4096), and the exFAT code path needs the volume-label
|
|
44
|
+
option defined.
|
|
45
|
+
- **exFAT** (cards ≥64GB usually ship exFAT, which IDF's FATFS disables and exposes no
|
|
46
|
+
Kconfig for) is enabled **without touching the ESP-IDF tree**: `main/fatfs_ffconf.h`
|
|
47
|
+
is a repo-local copy of IDF's `ffconf.h` with `FF_FS_EXFAT=1`, force-included into
|
|
48
|
+
the fatfs component from `main/CMakeLists.txt` (`-include …/fatfs_ffconf.h`). Its
|
|
49
|
+
`#ifndef _FFCONF_DEFINED` guard makes IDF's own ffconf.h a no-op, so the override
|
|
50
|
+
wins and the config is fully reproducible from the repo. If ESP-IDF is upgraded,
|
|
51
|
+
re-sync `fatfs_ffconf.h` from the new `components/fatfs/src/ffconf.h`.
|
|
52
|
+
|
|
53
|
+
**Device** (`main/camera.cpp`, `CameraDriver`):
|
|
54
|
+
- Mounts the microSD at `/sdcard` (SDMMC slot 1, 4-bit, CLK43/CMD44/D0–D3=39–42, P4
|
|
55
|
+
on-chip LDO channel 4 for the SD I/O rail).
|
|
56
|
+
- `captureStillToSd()` — one full-res frame → HW JPEG → `/sdcard/frame.jpg`.
|
|
57
|
+
- `recordH264ClipToFile()` — switches `/dev/video0` to YUV420, drains warmup frames,
|
|
58
|
+
drives the `/dev/video11` M2M encoder for the duration into a **persistent PSRAM
|
|
59
|
+
buffer** (allocated before the camera reconfiguration so the contiguous alloc
|
|
60
|
+
succeeds; reused across captures), then **bulk-writes** the clip to SD. Buffering in
|
|
61
|
+
RAM keeps the capture at ~15 fps — a per-frame fwrite to SD inside the loop halves
|
|
62
|
+
it. `min_qp=22 @ 5 Mbps` → good 1080p, ~6–7 MB / 10s.
|
|
63
|
+
|
|
64
|
+
**GEADEV commands** (weak `geaHandleExtraDevCommand` hook in
|
|
65
|
+
`targets/esp32/services/device_control.cpp`, overridden in `camera.cpp` for the P4):
|
|
66
|
+
- `GEADEV CAMSTILL` → writes `/sdcard/frame.jpg`, returns size
|
|
67
|
+
- `GEADEV CAMCLIP [seconds]` → writes `/sdcard/clip.h264`, returns size/frames/fps
|
|
68
|
+
- `GEADEV STAT <path>` → file size
|
|
69
|
+
- `GEADEV GET <path> <off> <len>` → CRC-tagged base64 chunk (reflected CRC-32)
|
|
70
|
+
|
|
71
|
+
**Host** (`tools/capture-camera.py`): triggers the capture, then pulls the file in
|
|
72
|
+
64 KB chunks; each chunk is CRC-checked and re-requested on mismatch, so dropped
|
|
73
|
+
serial lines never corrupt the result.
|
|
74
|
+
|
|
75
|
+
## Notes / characteristics
|
|
76
|
+
|
|
77
|
+
- Capture runs at ~15 fps at 1080p (the synchronous capture→encode loop); a 10s clip
|
|
78
|
+
is ~147 frames played at ~15 fps — a faithful 10 seconds of real time, **0 decode
|
|
79
|
+
errors** (the CRC-verified pull is bit-perfect).
|
|
80
|
+
- The serial pull is the slow part (~20–25 KB/s → a 7 MB clip ≈ 4–5 min). It's fully
|
|
81
|
+
automated and reliable; the originals also sit on the SD card if you'd rather pull
|
|
82
|
+
the card. (Faster transfer would need WiFi/HTTP or USB mass-storage.)
|
|
83
|
+
- Recording freezes the on-screen preview for its duration (the camera is exclusively
|
|
84
|
+
owned during capture).
|
|
@@ -0,0 +1,369 @@
|
|
|
1
|
+
#!/usr/bin/env python3
|
|
2
|
+
"""Capture a full-resolution still + a 1080p H.264 clip from the ESP32-P4 camera.
|
|
3
|
+
|
|
4
|
+
The device records to its microSD card (using the board's hardware JPEG / H.264
|
|
5
|
+
encoders), then this tool pulls the on-card files off over the USB-serial console
|
|
6
|
+
with a chunked, CRC-verified transfer that re-requests any corrupted chunk — so the
|
|
7
|
+
pulled files are bit-perfect copies of what's on the card.
|
|
8
|
+
|
|
9
|
+
GEADEV CAMSTILL -> writes /sdcard/frame.jpg, returns size
|
|
10
|
+
GEADEV CAMCLIP [seconds] -> writes /sdcard/clip.h264, returns size/frames/fps
|
|
11
|
+
GEADEV STAT <path> -> file size
|
|
12
|
+
GEADEV GET <path> <off> <len> -> CRC-tagged base64 chunk
|
|
13
|
+
|
|
14
|
+
Outputs land in targets/esp32-p4-waveshare-touch-lcd-7/captures/:
|
|
15
|
+
- frame_<ts>.jpg 1920x1080 hardware-JPEG still
|
|
16
|
+
- clip_<ts>.h264 1080p hardware-H.264 elementary stream
|
|
17
|
+
- clip_<ts>.mp4 remuxed with ffmpeg (if installed)
|
|
18
|
+
|
|
19
|
+
Examples:
|
|
20
|
+
python3 tools/capture-camera.py # still + 10s clip
|
|
21
|
+
python3 tools/capture-camera.py --clip-only --seconds 10
|
|
22
|
+
python3 tools/capture-camera.py --still-only
|
|
23
|
+
"""
|
|
24
|
+
import argparse
|
|
25
|
+
import array
|
|
26
|
+
import base64
|
|
27
|
+
import binascii
|
|
28
|
+
import fcntl
|
|
29
|
+
import glob
|
|
30
|
+
import json
|
|
31
|
+
import os
|
|
32
|
+
import select
|
|
33
|
+
import shutil
|
|
34
|
+
import subprocess
|
|
35
|
+
import sys
|
|
36
|
+
import termios
|
|
37
|
+
import time
|
|
38
|
+
|
|
39
|
+
THIS_DIR = os.path.dirname(os.path.abspath(__file__))
|
|
40
|
+
TARGET_DIR = os.path.dirname(THIS_DIR)
|
|
41
|
+
REPO = os.path.abspath(os.path.join(TARGET_DIR, "..", ".."))
|
|
42
|
+
CAPTURES = os.path.join(TARGET_DIR, "captures")
|
|
43
|
+
CHUNK = 64 * 1024 # bytes per GET request — small enough that a dropped line is rare
|
|
44
|
+
# per chunk, so the CRC-mismatch retry reliably converges.
|
|
45
|
+
|
|
46
|
+
# CRC matching the device's crc32z() in camera.cpp (reflected poly 0xEDB88820). Used
|
|
47
|
+
# only to verify each pulled chunk end-to-end; it just has to agree with the device.
|
|
48
|
+
_CRC_TABLE = [0] * 256
|
|
49
|
+
for _i in range(256):
|
|
50
|
+
_c = _i
|
|
51
|
+
for _ in range(8):
|
|
52
|
+
_c = ((_c >> 1) ^ (0xEDB88820 if (_c & 1) else 0)) & 0xFFFFFFFF
|
|
53
|
+
_CRC_TABLE[_i] = _c
|
|
54
|
+
|
|
55
|
+
|
|
56
|
+
def device_crc32(data):
|
|
57
|
+
c = 0xFFFFFFFF
|
|
58
|
+
for b in data:
|
|
59
|
+
c = ((c >> 8) ^ _CRC_TABLE[(c ^ b) & 0xFF]) & 0xFFFFFFFF
|
|
60
|
+
return (c ^ 0xFFFFFFFF) & 0xFFFFFFFF
|
|
61
|
+
|
|
62
|
+
|
|
63
|
+
class SerialPort:
|
|
64
|
+
"""The GEADEV console opened without touching DTR/RTS: a modem-line pulse
|
|
65
|
+
drops a USB-Serial-JTAG board into ROM download mode."""
|
|
66
|
+
|
|
67
|
+
def __init__(self, port, baud, trace=False):
|
|
68
|
+
self.path = port
|
|
69
|
+
self.fd = os.open(self.path, os.O_RDWR | os.O_NOCTTY | os.O_NONBLOCK)
|
|
70
|
+
attrs = termios.tcgetattr(self.fd)
|
|
71
|
+
attrs[0] = 0
|
|
72
|
+
attrs[1] = 0
|
|
73
|
+
attrs[2] = (attrs[2] | termios.CLOCAL | termios.CREAD | termios.CS8) & ~termios.CSIZE
|
|
74
|
+
attrs[2] |= termios.CS8
|
|
75
|
+
attrs[3] = 0
|
|
76
|
+
attrs[4] = termios.B115200
|
|
77
|
+
attrs[5] = termios.B115200
|
|
78
|
+
attrs[6][termios.VMIN] = 0
|
|
79
|
+
attrs[6][termios.VTIME] = 0
|
|
80
|
+
termios.tcsetattr(self.fd, termios.TCSANOW, attrs)
|
|
81
|
+
if baud != 115200:
|
|
82
|
+
set_baud_macos(self.fd, baud)
|
|
83
|
+
termios.tcflush(self.fd, termios.TCIFLUSH)
|
|
84
|
+
self.buffer = bytearray()
|
|
85
|
+
self.trace = trace
|
|
86
|
+
|
|
87
|
+
def close(self):
|
|
88
|
+
if self.fd is not None:
|
|
89
|
+
os.close(self.fd)
|
|
90
|
+
self.fd = None
|
|
91
|
+
|
|
92
|
+
def write_line(self, line):
|
|
93
|
+
data = (line.rstrip("\r\n") + "\n").encode("ascii")
|
|
94
|
+
view = memoryview(data)
|
|
95
|
+
offset = 0
|
|
96
|
+
while offset < len(data):
|
|
97
|
+
_, writable, _ = select.select([], [self.fd], [], 5.0)
|
|
98
|
+
if not writable:
|
|
99
|
+
continue
|
|
100
|
+
try:
|
|
101
|
+
offset += os.write(self.fd, view[offset:])
|
|
102
|
+
except BlockingIOError:
|
|
103
|
+
continue
|
|
104
|
+
|
|
105
|
+
def read_line(self, timeout):
|
|
106
|
+
deadline = time.monotonic() + timeout
|
|
107
|
+
while True:
|
|
108
|
+
newline = self.buffer.find(b"\n")
|
|
109
|
+
if newline >= 0:
|
|
110
|
+
raw = self.buffer[:newline]
|
|
111
|
+
del self.buffer[: newline + 1]
|
|
112
|
+
return raw.rstrip(b"\r").decode("utf-8", "replace")
|
|
113
|
+
remaining = deadline - time.monotonic()
|
|
114
|
+
if remaining <= 0:
|
|
115
|
+
return None
|
|
116
|
+
ready, _, _ = select.select([self.fd], [], [], remaining)
|
|
117
|
+
if not ready:
|
|
118
|
+
return None
|
|
119
|
+
try:
|
|
120
|
+
chunk = os.read(self.fd, 4096)
|
|
121
|
+
except BlockingIOError:
|
|
122
|
+
continue
|
|
123
|
+
if chunk:
|
|
124
|
+
self.buffer.extend(chunk)
|
|
125
|
+
|
|
126
|
+
|
|
127
|
+
def board_port():
|
|
128
|
+
"""Pick the console when exactly one USB-serial device is attached; with
|
|
129
|
+
several, the caller must say which one with --port (addresses are not
|
|
130
|
+
stable board identities, so nothing here guesses)."""
|
|
131
|
+
candidates = sorted(glob.glob("/dev/cu.usbmodem*") + glob.glob("/dev/ttyACM*"))
|
|
132
|
+
if len(candidates) == 1:
|
|
133
|
+
return candidates[0]
|
|
134
|
+
if not candidates:
|
|
135
|
+
raise SystemExit("no USB serial device found; pass --port")
|
|
136
|
+
raise SystemExit("several USB serial devices found; pass --port for the P4 console: " + ", ".join(candidates))
|
|
137
|
+
|
|
138
|
+
|
|
139
|
+
def set_baud_macos(fd, baud):
|
|
140
|
+
"""Set an arbitrary baud the macOS way (termios has no B921600). The P4 console
|
|
141
|
+
runs at 921600 and its USB-CDC line coding follows it, so the host must match."""
|
|
142
|
+
IOSSIOSPEED = 0x80045402
|
|
143
|
+
fcntl.ioctl(fd, IOSSIOSPEED, array.array("i", [baud]), True)
|
|
144
|
+
|
|
145
|
+
|
|
146
|
+
def parse_kv(line):
|
|
147
|
+
kv = {}
|
|
148
|
+
for tok in line.split():
|
|
149
|
+
if "=" in tok:
|
|
150
|
+
k, v = tok.split("=", 1)
|
|
151
|
+
kv[k] = v
|
|
152
|
+
return kv
|
|
153
|
+
|
|
154
|
+
|
|
155
|
+
def drain(port, quiet_for=0.4, max_wait=3.0):
|
|
156
|
+
"""Read+discard pending serial lines until the channel is quiet, so a command we
|
|
157
|
+
send next isn't corrupted by a backlog of perf-log spam."""
|
|
158
|
+
deadline = time.monotonic() + max_wait
|
|
159
|
+
while time.monotonic() < deadline:
|
|
160
|
+
if port.read_line(quiet_for) is None:
|
|
161
|
+
return
|
|
162
|
+
|
|
163
|
+
|
|
164
|
+
class CommandCorrupted(Exception):
|
|
165
|
+
pass
|
|
166
|
+
|
|
167
|
+
|
|
168
|
+
def command(port, cmd, ok_prefix, timeout):
|
|
169
|
+
"""Send `cmd`, read lines until one starts with `ok_prefix` (returns its kv dict).
|
|
170
|
+
Raises CommandCorrupted on 'unknown-command' (garbled in transit) or a matching
|
|
171
|
+
'GEADEV:ERR <verb>' failure. Tolerates interleaved log lines."""
|
|
172
|
+
verb = cmd.split()[1] if len(cmd.split()) > 1 else ""
|
|
173
|
+
drain(port)
|
|
174
|
+
port.write_line(cmd)
|
|
175
|
+
deadline = time.monotonic() + timeout
|
|
176
|
+
while True:
|
|
177
|
+
remaining = deadline - time.monotonic()
|
|
178
|
+
if remaining <= 0:
|
|
179
|
+
raise TimeoutError(f"no response to {cmd!r}")
|
|
180
|
+
line = port.read_line(min(remaining, 30.0))
|
|
181
|
+
if line is None:
|
|
182
|
+
continue
|
|
183
|
+
if line.startswith("GEADEV:ERR unknown-command"):
|
|
184
|
+
raise CommandCorrupted(line)
|
|
185
|
+
if line.startswith(f"GEADEV:ERR {verb}"):
|
|
186
|
+
raise RuntimeError(line)
|
|
187
|
+
if line.startswith(ok_prefix):
|
|
188
|
+
return parse_kv(line)
|
|
189
|
+
if port.trace and line.startswith("GEADEV:"):
|
|
190
|
+
print(line, file=sys.stderr)
|
|
191
|
+
|
|
192
|
+
|
|
193
|
+
def command_retry(port, cmd, ok_prefix, timeout, retries=4):
|
|
194
|
+
last = None
|
|
195
|
+
for attempt in range(retries):
|
|
196
|
+
try:
|
|
197
|
+
return command(port, cmd, ok_prefix, timeout)
|
|
198
|
+
except CommandCorrupted as e:
|
|
199
|
+
last = e
|
|
200
|
+
print(f" (command garbled, retry {attempt + 1}/{retries})", file=sys.stderr)
|
|
201
|
+
time.sleep(0.3)
|
|
202
|
+
raise RuntimeError(f"{cmd!r} kept getting corrupted: {last}")
|
|
203
|
+
|
|
204
|
+
|
|
205
|
+
def read_until(port, end_marker, overall_timeout, quiet_eos=5.0):
|
|
206
|
+
"""Drain raw bytes into one bytearray until `end_marker` appears (or the channel
|
|
207
|
+
goes quiet after data). Tight loop so the OS serial buffer never overflows."""
|
|
208
|
+
buf = bytearray(port.buffer)
|
|
209
|
+
port.buffer = bytearray()
|
|
210
|
+
deadline = time.monotonic() + overall_timeout
|
|
211
|
+
search_from = 0
|
|
212
|
+
last_recv = time.monotonic()
|
|
213
|
+
while True:
|
|
214
|
+
idx = buf.find(end_marker, search_from)
|
|
215
|
+
if idx >= 0:
|
|
216
|
+
return bytes(buf)
|
|
217
|
+
search_from = max(0, len(buf) - len(end_marker))
|
|
218
|
+
now = time.monotonic()
|
|
219
|
+
if len(buf) > 0 and now - last_recv > quiet_eos:
|
|
220
|
+
return bytes(buf)
|
|
221
|
+
if now >= deadline:
|
|
222
|
+
return bytes(buf)
|
|
223
|
+
r, _, _ = select.select([port.fd], [], [], min(deadline - now, 2.0))
|
|
224
|
+
if not r:
|
|
225
|
+
continue
|
|
226
|
+
chunk = os.read(port.fd, 1 << 16)
|
|
227
|
+
if chunk:
|
|
228
|
+
buf += chunk
|
|
229
|
+
last_recv = time.monotonic()
|
|
230
|
+
|
|
231
|
+
|
|
232
|
+
def get_chunk(port, path, offset, length, retries=6):
|
|
233
|
+
"""Pull [offset, offset+length) of `path` and verify its CRC. Retries the chunk on
|
|
234
|
+
any corruption (bad base64, dropped line, CRC mismatch). Returns the bytes."""
|
|
235
|
+
begin_pfx = b"GEADEV:GET BEGIN"
|
|
236
|
+
end_pfx = b"GEADEV:GET END"
|
|
237
|
+
for attempt in range(retries):
|
|
238
|
+
drain(port, quiet_for=0.2, max_wait=1.5)
|
|
239
|
+
port.write_line(f"GEADEV GET {path} {offset} {length}")
|
|
240
|
+
raw = read_until(port, end_pfx, overall_timeout=120.0)
|
|
241
|
+
begin = None
|
|
242
|
+
chunks = []
|
|
243
|
+
for line in raw.split(b"\n"):
|
|
244
|
+
line = line.rstrip(b"\r")
|
|
245
|
+
if begin is None:
|
|
246
|
+
if line.startswith(begin_pfx):
|
|
247
|
+
begin = parse_kv(line.decode("ascii", "replace"))
|
|
248
|
+
continue
|
|
249
|
+
if line.startswith(end_pfx):
|
|
250
|
+
break
|
|
251
|
+
if line.startswith(b"GEADEV:DATA "):
|
|
252
|
+
chunks.append(line[len(b"GEADEV:DATA "):].strip())
|
|
253
|
+
if begin is None:
|
|
254
|
+
continue # never saw BEGIN — retry
|
|
255
|
+
try:
|
|
256
|
+
data = base64.b64decode(b"".join(chunks), validate=True)
|
|
257
|
+
except binascii.Error:
|
|
258
|
+
continue # a line was garbled — retry the chunk
|
|
259
|
+
want_len = int(begin.get("len", -1))
|
|
260
|
+
want_crc = int(begin.get("crc", "x"), 16) if begin.get("crc") else None
|
|
261
|
+
if want_len >= 0 and len(data) != want_len:
|
|
262
|
+
continue
|
|
263
|
+
if want_crc is not None and device_crc32(data) != want_crc:
|
|
264
|
+
continue
|
|
265
|
+
return data
|
|
266
|
+
raise RuntimeError(f"chunk @{offset} ({length}B) of {path} failed CRC after {retries} tries")
|
|
267
|
+
|
|
268
|
+
|
|
269
|
+
def pull_file(port, remote_path, local_path, size):
|
|
270
|
+
t0 = time.monotonic()
|
|
271
|
+
with open(local_path, "wb") as out:
|
|
272
|
+
offset = 0
|
|
273
|
+
while offset < size:
|
|
274
|
+
want = min(CHUNK, size - offset)
|
|
275
|
+
data = get_chunk(port, remote_path, offset, want)
|
|
276
|
+
if not data:
|
|
277
|
+
break
|
|
278
|
+
out.write(data)
|
|
279
|
+
offset += len(data)
|
|
280
|
+
pct = 100 * offset / size if size else 100
|
|
281
|
+
print(f"\r pulling {os.path.basename(local_path)}: {offset}/{size} ({pct:.0f}%)",
|
|
282
|
+
end="", file=sys.stderr)
|
|
283
|
+
dt = time.monotonic() - t0
|
|
284
|
+
rate = (offset / 1024.0) / dt if dt > 0 else 0
|
|
285
|
+
print(f"\r pulled {os.path.basename(local_path)}: {offset} bytes in {dt:.1f}s ({rate:.0f} KB/s) ",
|
|
286
|
+
file=sys.stderr)
|
|
287
|
+
return offset
|
|
288
|
+
|
|
289
|
+
|
|
290
|
+
def capture_still(port, ts):
|
|
291
|
+
print("→ CAMSTILL (full-resolution JPEG to SD) ...")
|
|
292
|
+
kv = command_retry(port, "GEADEV CAMSTILL", "GEADEV:CAMSTILL OK", timeout=40.0)
|
|
293
|
+
path, size = kv["path"], int(kv["bytes"])
|
|
294
|
+
out = os.path.join(CAPTURES, f"frame_{ts}.jpg")
|
|
295
|
+
got = pull_file(port, path, out, size)
|
|
296
|
+
print(f" saved {out} {kv.get('width','?')}x{kv.get('height','?')} {got} bytes")
|
|
297
|
+
return out
|
|
298
|
+
|
|
299
|
+
|
|
300
|
+
def capture_clip(port, ts, seconds):
|
|
301
|
+
print(f"→ CAMCLIP {seconds:g}s (1080p hardware H.264 to SD) ...")
|
|
302
|
+
kv = command_retry(port, f"GEADEV CAMCLIP {seconds:g}", "GEADEV:CAMCLIP OK",
|
|
303
|
+
timeout=seconds + 60.0)
|
|
304
|
+
path, size = kv["path"], int(kv["bytes"])
|
|
305
|
+
fps, frames = kv.get("fps", "?"), kv.get("frames", "?")
|
|
306
|
+
raw = os.path.join(CAPTURES, f"clip_{ts}.h264")
|
|
307
|
+
got = pull_file(port, path, raw, size)
|
|
308
|
+
print(f" saved {raw} {kv.get('width','?')}x{kv.get('height','?')} {frames} frames @ {fps}fps {got} bytes")
|
|
309
|
+
|
|
310
|
+
mp4 = os.path.join(CAPTURES, f"clip_{ts}.mp4")
|
|
311
|
+
ffmpeg = shutil.which("ffmpeg")
|
|
312
|
+
if not ffmpeg:
|
|
313
|
+
print(" ffmpeg not found on PATH — leaving the raw .h264 (plays in VLC).")
|
|
314
|
+
return raw
|
|
315
|
+
rate = "30"
|
|
316
|
+
try:
|
|
317
|
+
if float(fps) > 1.0:
|
|
318
|
+
rate = f"{float(fps):.3f}"
|
|
319
|
+
except (TypeError, ValueError):
|
|
320
|
+
pass
|
|
321
|
+
try:
|
|
322
|
+
subprocess.run([ffmpeg, "-y", "-r", rate, "-i", raw, "-c", "copy", mp4],
|
|
323
|
+
check=True, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
|
|
324
|
+
print(f" remuxed → {mp4} ({rate} fps)")
|
|
325
|
+
return mp4
|
|
326
|
+
except subprocess.CalledProcessError as e:
|
|
327
|
+
print(f" ffmpeg remux failed ({e}); the raw .h264 is still valid.")
|
|
328
|
+
return raw
|
|
329
|
+
|
|
330
|
+
|
|
331
|
+
def main():
|
|
332
|
+
parser = argparse.ArgumentParser(description=__doc__, formatter_class=argparse.RawDescriptionHelpFormatter)
|
|
333
|
+
parser.add_argument("--port", default=None, help="serial console of the P4 (default: the only attached USB serial device)")
|
|
334
|
+
parser.add_argument("--baud", type=int, default=921600, help="device console baud (default 921600)")
|
|
335
|
+
parser.add_argument("--seconds", type=float, default=10.0, help="clip length (default 10)")
|
|
336
|
+
parser.add_argument("--still-only", action="store_true")
|
|
337
|
+
parser.add_argument("--clip-only", action="store_true")
|
|
338
|
+
parser.add_argument("--trace", action="store_true", help="echo GEADEV lines while waiting")
|
|
339
|
+
args = parser.parse_args()
|
|
340
|
+
|
|
341
|
+
os.makedirs(CAPTURES, exist_ok=True)
|
|
342
|
+
port = SerialPort(args.port or board_port(), args.baud, trace=args.trace)
|
|
343
|
+
ts = time.strftime("%Y%m%d-%H%M%S")
|
|
344
|
+
|
|
345
|
+
def robust_ping():
|
|
346
|
+
for _ in range(8):
|
|
347
|
+
drain(port)
|
|
348
|
+
port.write_line("GEADEV PING")
|
|
349
|
+
deadline = time.monotonic() + 4.0
|
|
350
|
+
while time.monotonic() < deadline:
|
|
351
|
+
line = port.read_line(deadline - time.monotonic())
|
|
352
|
+
if line is None:
|
|
353
|
+
break
|
|
354
|
+
if line.startswith("GEADEV:PONG"):
|
|
355
|
+
return line
|
|
356
|
+
raise RuntimeError("device did not answer PING")
|
|
357
|
+
|
|
358
|
+
try:
|
|
359
|
+
print(f"connected: {robust_ping()} (port {port.path})")
|
|
360
|
+
if not args.clip_only:
|
|
361
|
+
capture_still(port, ts)
|
|
362
|
+
if not args.still_only:
|
|
363
|
+
capture_clip(port, ts, args.seconds)
|
|
364
|
+
finally:
|
|
365
|
+
port.close()
|
|
366
|
+
|
|
367
|
+
|
|
368
|
+
if __name__ == "__main__":
|
|
369
|
+
main()
|
|
@@ -0,0 +1,31 @@
|
|
|
1
|
+
{
|
|
2
|
+
"id": "esp32-s3-devkit-n16r8",
|
|
3
|
+
"extends": "esp32-s3",
|
|
4
|
+
"adapter": "esp32-idf",
|
|
5
|
+
"mcu": "esp32s3",
|
|
6
|
+
|
|
7
|
+
"_comment": "A bare ESP32-S3-WROOM-1-N16R8 module: 16MB quad flash, 8MB octal PSRAM, no panel, no touch, no PMIC, no IMU, no codec. Probed 2026-09-19: ESP32-S3 rev v0.2, flash MXIC c2/2018 16MB, embedded PSRAM 8MB.",
|
|
8
|
+
|
|
9
|
+
"flashSize": "16MB",
|
|
10
|
+
|
|
11
|
+
"_console": "This module is reached through its CH-series USB-UART bridge, not the native USB-Serial/JTAG port. The base target routes the console to USB-JTAG, which on this board logs into a port nobody is connected to.",
|
|
12
|
+
"console": { "transport": "uart", "uart": 0, "baud": 115200 },
|
|
13
|
+
|
|
14
|
+
"_psram": "N16R8 is 8MB OCTAL PSRAM (probed: AP generation-3, 64 Mbit, 3V). Declared rather than inherited — an octal setting on a quad-wired module boots wrong instead of failing.",
|
|
15
|
+
"psram": { "mode": "octal", "speed": 80 },
|
|
16
|
+
|
|
17
|
+
"_display": "No panel and no canvas: this module has no display at all, so the runtime builds no framebuffer, no app tree and no frame loop. A bare module that wants an offscreen surface to screenshot over OTA declares a `canvas` block instead.",
|
|
18
|
+
|
|
19
|
+
"controls": {
|
|
20
|
+
"launcherButton": { "pin": 0, "activeLevel": 0 }
|
|
21
|
+
},
|
|
22
|
+
|
|
23
|
+
"partitions": {
|
|
24
|
+
"nvs": { "type": "data", "subtype": "nvs", "offset": "0x9000", "size": "0x6000" },
|
|
25
|
+
"otadata": { "type": "data", "subtype": "ota", "offset": "0xf000", "size": "0x2000" },
|
|
26
|
+
"phy_init": { "type": "data", "subtype": "phy", "offset": "0x11000", "size": "0x1000" },
|
|
27
|
+
"ota_0": { "type": "app", "subtype": "ota_0", "offset": "0x20000", "size": "0x600000" },
|
|
28
|
+
"ota_1": { "type": "app", "subtype": "ota_1", "offset": "0x620000","size": "0x600000" },
|
|
29
|
+
"storage": { "type": "data", "subtype": "spiffs", "offset": "0xC20000","size": "0x3E0000" }
|
|
30
|
+
}
|
|
31
|
+
}
|
|
@@ -0,0 +1,10 @@
|
|
|
1
|
+
cmake_minimum_required(VERSION 3.16)
|
|
2
|
+
|
|
3
|
+
set(EXTRA_COMPONENT_DIRS "${CMAKE_CURRENT_LIST_DIR}/../esp32/components")
|
|
4
|
+
include("${CMAKE_CURRENT_LIST_DIR}/../esp32/app_project.cmake")
|
|
5
|
+
set(GEA_EMBEDDED_APP "tic-tac-toe" CACHE STRING "Example app to build (must match a package.json gea.id)")
|
|
6
|
+
set(PROJECT_VER "${GEA_EMBEDDED_APP}" CACHE STRING "Firmware app id" FORCE)
|
|
7
|
+
|
|
8
|
+
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
|
|
9
|
+
idf_build_set_property(MINIMAL_BUILD ON)
|
|
10
|
+
project(gea_embedded)
|
|
@@ -0,0 +1,40 @@
|
|
|
1
|
+
dependencies:
|
|
2
|
+
espressif/esp_libsrtp:
|
|
3
|
+
component_hash: 131560184c73ec09f77d8904a2db709307803f0f9f111898921b6966776eac15
|
|
4
|
+
dependencies: []
|
|
5
|
+
source:
|
|
6
|
+
registry_url: https://components.espressif.com
|
|
7
|
+
type: service
|
|
8
|
+
version: 1.0.0
|
|
9
|
+
espressif/esp_peer:
|
|
10
|
+
component_hash: 2013edcc7d88756830055a74d86a3900f484d6015aacb820a6b7d81e53c7b05b
|
|
11
|
+
dependencies:
|
|
12
|
+
- name: espressif/esp_libsrtp
|
|
13
|
+
registry_url: https://components.espressif.com
|
|
14
|
+
require: private
|
|
15
|
+
version: ^1.0.0
|
|
16
|
+
source:
|
|
17
|
+
registry_url: https://components.espressif.com/
|
|
18
|
+
type: service
|
|
19
|
+
version: 1.4.1
|
|
20
|
+
espressif/esp_websocket_client:
|
|
21
|
+
component_hash: 3fb288702517ef4d75bf933a115f1056ee0c2540d964f9e1d856e0bb67e1dfeb
|
|
22
|
+
dependencies:
|
|
23
|
+
- name: idf
|
|
24
|
+
require: private
|
|
25
|
+
version: '>=5.0'
|
|
26
|
+
source:
|
|
27
|
+
registry_url: https://components.espressif.com/
|
|
28
|
+
type: service
|
|
29
|
+
version: 1.7.0
|
|
30
|
+
idf:
|
|
31
|
+
source:
|
|
32
|
+
type: idf
|
|
33
|
+
version: 6.0.2
|
|
34
|
+
direct_dependencies:
|
|
35
|
+
- espressif/esp_peer
|
|
36
|
+
- espressif/esp_websocket_client
|
|
37
|
+
- idf
|
|
38
|
+
manifest_hash: a95481ca1b3b5f42784f5a922c652118d52b1b70154ed81a0c4e8f5c72fd131e
|
|
39
|
+
target: esp32s3
|
|
40
|
+
version: 3.0.0
|