@galacean/engine-spine 4.2.6 → 4.2.7

package/types/spine-core/AnimationState.d.ts

@@ -1,365 +0,0 @@
-import { AnimationStateData } from "./AnimationStateData";
-import { IntSet, Pool } from "./Utils";
-import { Skeleton } from "./Skeleton";
-import { MixBlend, AttachmentTimeline, Timeline } from "./Animation";
-import { Slot } from "./Slot";
-import { Animation } from "./Animation";
-import { Event } from "./Event";
-/** Applies animations over time, queues animations for later playback, mixes (crossfading) between animations, and applies
- * multiple animations on top of each other (layering).
- *
- * See [Applying Animations](http://esotericsoftware.com/spine-applying-animations/) in the Spine Runtimes Guide. */
-export declare class AnimationState {
-    static emptyAnimation: Animation;
-    /** 1. A previously applied timeline has set this property.
-     *
-     * Result: Mix from the current pose to the timeline pose. */
-    static SUBSEQUENT: number;
-    /** 1. This is the first timeline to set this property.
-     * 2. The next track entry applied after this one does not have a timeline to set this property.
-     *
-     * Result: Mix from the setup pose to the timeline pose. */
-    static FIRST: number;
-    /** 1) A previously applied timeline has set this property.<br>
-     * 2) The next track entry to be applied does have a timeline to set this property.<br>
-     * 3) The next track entry after that one does not have a timeline to set this property.<br>
-     * Result: Mix from the current pose to the timeline pose, but do not mix out. This avoids "dipping" when crossfading
-     * animations that key the same property. A subsequent timeline will set this property using a mix. */
-    static HOLD_SUBSEQUENT: number;
-    /** 1) This is the first timeline to set this property.<br>
-     * 2) The next track entry to be applied does have a timeline to set this property.<br>
-     * 3) The next track entry after that one does not have a timeline to set this property.<br>
-     * Result: Mix from the setup pose to the timeline pose, but do not mix out. This avoids "dipping" when crossfading animations
-     * that key the same property. A subsequent timeline will set this property using a mix. */
-    static HOLD_FIRST: number;
-    /** 1. This is the first timeline to set this property.
-     * 2. The next track entry to be applied does have a timeline to set this property.
-     * 3. The next track entry after that one does have a timeline to set this property.
-     * 4. timelineHoldMix stores the first subsequent track entry that does not have a timeline to set this property.
-     *
-     * Result: The same as HOLD except the mix percentage from the timelineHoldMix track entry is used. This handles when more than
-     * 2 track entries in a row have a timeline that sets the same property.
-     *
-     * Eg, A -> B -> C -> D where A, B, and C have a timeline setting same property, but D does not. When A is applied, to avoid
-     * "dipping" A is not mixed out, however D (the first entry that doesn't set the property) mixing in is used to mix out A
-     * (which affects B and C). Without using D to mix out, A would be applied fully until mixing completes, then snap into
-     * place. */
-    static HOLD_MIX: number;
-    static SETUP: number;
-    static CURRENT: number;
-    /** The AnimationStateData to look up mix durations. */
-    data: AnimationStateData;
-    /** The list of tracks that currently have animations, which may contain null entries. */
-    tracks: TrackEntry[];
-    /** Multiplier for the delta time when the animation state is updated, causing time for all animations and mixes to play slower
-     * or faster. Defaults to 1.
-     *
-     * See TrackEntry {@link TrackEntry#timeScale} for affecting a single animation. */
-    timeScale: number;
-    unkeyedState: number;
-    events: Event[];
-    listeners: AnimationStateListener[];
-    queue: EventQueue;
-    propertyIDs: IntSet;
-    animationsChanged: boolean;
-    trackEntryPool: Pool<TrackEntry>;
-    constructor(data: AnimationStateData);
-    /** Increments each track entry {@link TrackEntry#trackTime()}, setting queued animations as current if needed. */
-    update(delta: number): void;
-    /** Returns true when all mixing from entries are complete. */
-    updateMixingFrom(to: TrackEntry, delta: number): boolean;
-    /** Poses the skeleton using the track entry animations. There are no side effects other than invoking listeners, so the
-     * animation state can be applied to multiple skeletons to pose them identically.
-     * @returns True if any animations were applied. */
-    apply(skeleton: Skeleton): boolean;
-    applyMixingFrom(to: TrackEntry, skeleton: Skeleton, blend: MixBlend): number;
-    applyAttachmentTimeline(timeline: AttachmentTimeline, skeleton: Skeleton, time: number, blend: MixBlend, attachments: boolean): void;
-    setAttachment(skeleton: Skeleton, slot: Slot, attachmentName: string, attachments: boolean): void;
-    applyRotateTimeline(timeline: Timeline, skeleton: Skeleton, time: number, alpha: number, blend: MixBlend, timelinesRotation: Array<number>, i: number, firstFrame: boolean): void;
-    queueEvents(entry: TrackEntry, animationTime: number): void;
-    /** Removes all animations from all tracks, leaving skeletons in their current pose.
-     *
-     * It may be desired to use {@link AnimationState#setEmptyAnimation()} to mix the skeletons back to the setup pose,
-     * rather than leaving them in their current pose. */
-    clearTracks(): void;
-    /** Removes all animations from the track, leaving skeletons in their current pose.
-     *
-     * It may be desired to use {@link AnimationState#setEmptyAnimation()} to mix the skeletons back to the setup pose,
-     * rather than leaving them in their current pose. */
-    clearTrack(trackIndex: number): void;
-    setCurrent(index: number, current: TrackEntry, interrupt: boolean): void;
-    /** Sets an animation by name.
-    *
-    * {@link #setAnimationWith(}. */
-    setAnimation(trackIndex: number, animationName: string, loop: boolean): TrackEntry;
-    /** Sets the current animation for a track, discarding any queued animations. If the formerly current track entry was never
-     * applied to a skeleton, it is replaced (not mixed from).
-     * @param loop If true, the animation will repeat. If false it will not, instead its last frame is applied if played beyond its
-     *           duration. In either case {@link TrackEntry#trackEnd} determines when the track is cleared.
-     * @returns A track entry to allow further customization of animation playback. References to the track entry must not be kept
-     *         after the {@link AnimationStateListener#dispose()} event occurs. */
-    setAnimationWith(trackIndex: number, animation: Animation, loop: boolean): TrackEntry;
-    /** Queues an animation by name.
-     *
-     * See {@link #addAnimationWith()}. */
-    addAnimation(trackIndex: number, animationName: string, loop: boolean, delay: number): TrackEntry;
-    /** Adds an animation to be played after the current or last queued animation for a track. If the track is empty, it is
-     * equivalent to calling {@link #setAnimationWith()}.
-     * @param delay If > 0, sets {@link TrackEntry#delay}. If <= 0, the delay set is the duration of the previous track entry
-     *           minus any mix duration (from the {@link AnimationStateData}) plus the specified `delay` (ie the mix
-     *           ends at (`delay` = 0) or before (`delay` < 0) the previous track entry duration). If the
-     *           previous entry is looping, its next loop completion is used instead of its duration.
-     * @returns A track entry to allow further customization of animation playback. References to the track entry must not be kept
-     *         after the {@link AnimationStateListener#dispose()} event occurs. */
-    addAnimationWith(trackIndex: number, animation: Animation, loop: boolean, delay: number): TrackEntry;
-    /** Sets an empty animation for a track, discarding any queued animations, and sets the track entry's
-     * {@link TrackEntry#mixduration}. An empty animation has no timelines and serves as a placeholder for mixing in or out.
-     *
-     * Mixing out is done by setting an empty animation with a mix duration using either {@link #setEmptyAnimation()},
-     * {@link #setEmptyAnimations()}, or {@link #addEmptyAnimation()}. Mixing to an empty animation causes
-     * the previous animation to be applied less and less over the mix duration. Properties keyed in the previous animation
-     * transition to the value from lower tracks or to the setup pose value if no lower tracks key the property. A mix duration of
-     * 0 still mixes out over one frame.
-     *
-     * Mixing in is done by first setting an empty animation, then adding an animation using
-     * {@link #addAnimation()} and on the returned track entry, set the
-     * {@link TrackEntry#setMixDuration()}. Mixing from an empty animation causes the new animation to be applied more and
-     * more over the mix duration. Properties keyed in the new animation transition from the value from lower tracks or from the
-     * setup pose value if no lower tracks key the property to the value keyed in the new animation. */
-    setEmptyAnimation(trackIndex: number, mixDuration: number): TrackEntry;
-    /** Adds an empty animation to be played after the current or last queued animation for a track, and sets the track entry's
-     * {@link TrackEntry#mixDuration}. If the track is empty, it is equivalent to calling
-     * {@link #setEmptyAnimation()}.
-     *
-     * See {@link #setEmptyAnimation()}.
-     * @param delay If > 0, sets {@link TrackEntry#delay}. If <= 0, the delay set is the duration of the previous track entry
-     *           minus any mix duration plus the specified `delay` (ie the mix ends at (`delay` = 0) or
-     *           before (`delay` < 0) the previous track entry duration). If the previous entry is looping, its next
-     *           loop completion is used instead of its duration.
-     * @return A track entry to allow further customization of animation playback. References to the track entry must not be kept
-     *         after the {@link AnimationStateListener#dispose()} event occurs. */
-    addEmptyAnimation(trackIndex: number, mixDuration: number, delay: number): TrackEntry;
-    /** Sets an empty animation for every track, discarding any queued animations, and mixes to it over the specified mix
-    * duration. */
-    setEmptyAnimations(mixDuration: number): void;
-    expandToIndex(index: number): TrackEntry;
-    /** @param last May be null. */
-    trackEntry(trackIndex: number, animation: Animation, loop: boolean, last: TrackEntry): TrackEntry;
-    disposeNext(entry: TrackEntry): void;
-    _animationsChanged(): void;
-    computeHold(entry: TrackEntry): void;
-    /** Returns the track entry for the animation currently playing on the track, or null if no animation is currently playing. */
-    getCurrent(trackIndex: number): TrackEntry;
-    /** Adds a listener to receive events for all track entries. */
-    addListener(listener: AnimationStateListener): void;
-    /** Removes the listener added with {@link #addListener()}. */
-    removeListener(listener: AnimationStateListener): void;
-    /** Removes all listeners added with {@link #addListener()}. */
-    clearListeners(): void;
-    /** Discards all listener notifications that have not yet been delivered. This can be useful to call from an
-     * {@link AnimationStateListener} when it is known that further notifications that may have been already queued for delivery
-     * are not wanted because new animations are being set. */
-    clearListenerNotifications(): void;
-}
-/** Stores settings and other state for the playback of an animation on an {@link AnimationState} track.
- *
- * References to a track entry must not be kept after the {@link AnimationStateListener#dispose()} event occurs. */
-export declare class TrackEntry {
-    /** The animation to apply for this track entry. */
-    animation: Animation;
-    /** The animation queued to start after this animation, or null. `next` makes up a linked list. */
-    next: TrackEntry;
-    /** The track entry for the previous animation when mixing from the previous animation to this animation, or null if no
-     * mixing is currently occuring. When mixing from multiple animations, `mixingFrom` makes up a linked list. */
-    mixingFrom: TrackEntry;
-    /** The track entry for the next animation when mixing from this animation to the next animation, or null if no mixing is
-     * currently occuring. When mixing to multiple animations, `mixingTo` makes up a linked list. */
-    mixingTo: TrackEntry;
-    /** The listener for events generated by this track entry, or null.
-     *
-     * A track entry returned from {@link AnimationState#setAnimation()} is already the current animation
-     * for the track, so the track entry listener {@link AnimationStateListener#start()} will not be called. */
-    listener: AnimationStateListener;
-    /** The index of the track where this track entry is either current or queued.
-     *
-     * See {@link AnimationState#getCurrent()}. */
-    trackIndex: number;
-    /** If true, the animation will repeat. If false it will not, instead its last frame is applied if played beyond its
-     * duration. */
-    loop: boolean;
-    /** If true, when mixing from the previous animation to this animation, the previous animation is applied as normal instead
-     * of being mixed out.
-     *
-     * When mixing between animations that key the same property, if a lower track also keys that property then the value will
-     * briefly dip toward the lower track value during the mix. This happens because the first animation mixes from 100% to 0%
-     * while the second animation mixes from 0% to 100%. Setting `holdPrevious` to true applies the first animation
-     * at 100% during the mix so the lower track value is overwritten. Such dipping does not occur on the lowest track which
-     * keys the property, only when a higher track also keys the property.
-     *
-     * Snapping will occur if `holdPrevious` is true and this animation does not key all the same properties as the
-     * previous animation. */
-    holdPrevious: boolean;
-    /** When the mix percentage ({@link #mixTime} / {@link #mixDuration}) is less than the
-     * `eventThreshold`, event timelines are applied while this animation is being mixed out. Defaults to 0, so event
-     * timelines are not applied while this animation is being mixed out. */
-    eventThreshold: number;
-    /** When the mix percentage ({@link #mixtime} / {@link #mixDuration}) is less than the
-     * `attachmentThreshold`, attachment timelines are applied while this animation is being mixed out. Defaults to
-     * 0, so attachment timelines are not applied while this animation is being mixed out. */
-    attachmentThreshold: number;
-    /** When the mix percentage ({@link #mixTime} / {@link #mixDuration}) is less than the
-     * `drawOrderThreshold`, draw order timelines are applied while this animation is being mixed out. Defaults to 0,
-     * so draw order timelines are not applied while this animation is being mixed out. */
-    drawOrderThreshold: number;
-    /** Seconds when this animation starts, both initially and after looping. Defaults to 0.
-     *
-     * When changing the `animationStart` time, it often makes sense to set {@link #animationLast} to the same
-     * value to prevent timeline keys before the start time from triggering. */
-    animationStart: number;
-    /** Seconds for the last frame of this animation. Non-looping animations won't play past this time. Looping animations will
-     * loop back to {@link #animationStart} at this time. Defaults to the animation {@link Animation#duration}. */
-    animationEnd: number;
-    /** The time in seconds this animation was last applied. Some timelines use this for one-time triggers. Eg, when this
-     * animation is applied, event timelines will fire all events between the `animationLast` time (exclusive) and
-     * `animationTime` (inclusive). Defaults to -1 to ensure triggers on frame 0 happen the first time this animation
-     * is applied. */
-    animationLast: number;
-    nextAnimationLast: number;
-    /** Seconds to postpone playing the animation. When this track entry is the current track entry, `delay`
-     * postpones incrementing the {@link #trackTime}. When this track entry is queued, `delay` is the time from
-     * the start of the previous animation to when this track entry will become the current track entry (ie when the previous
-     * track entry {@link TrackEntry#trackTime} >= this track entry's `delay`).
-     *
-     * {@link #timeScale} affects the delay. */
-    delay: number;
-    /** Current time in seconds this track entry has been the current track entry. The track time determines
-     * {@link #animationTime}. The track time can be set to start the animation at a time other than 0, without affecting
-     * looping. */
-    trackTime: number;
-    trackLast: number;
-    nextTrackLast: number;
-    /** The track time in seconds when this animation will be removed from the track. Defaults to the highest possible float
-     * value, meaning the animation will be applied until a new animation is set or the track is cleared. If the track end time
-     * is reached, no other animations are queued for playback, and mixing from any previous animations is complete, then the
-     * properties keyed by the animation are set to the setup pose and the track is cleared.
-     *
-     * It may be desired to use {@link AnimationState#addEmptyAnimation()} rather than have the animation
-     * abruptly cease being applied. */
-    trackEnd: number;
-    /** Multiplier for the delta time when this track entry is updated, causing time for this animation to pass slower or
-     * faster. Defaults to 1.
-     *
-     * {@link #mixTime} is not affected by track entry time scale, so {@link #mixDuration} may need to be adjusted to
-     * match the animation speed.
-     *
-     * When using {@link AnimationState#addAnimation()} with a `delay` <= 0, note the
-     * {@link #delay} is set using the mix duration from the {@link AnimationStateData}, assuming time scale to be 1. If
-     * the time scale is not 1, the delay may need to be adjusted.
-     *
-     * See AnimationState {@link AnimationState#timeScale} for affecting all animations. */
-    timeScale: number;
-    /** Values < 1 mix this animation with the skeleton's current pose (usually the pose resulting from lower tracks). Defaults
-     * to 1, which overwrites the skeleton's current pose with this animation.
-     *
-     * Typically track 0 is used to completely pose the skeleton, then alpha is used on higher tracks. It doesn't make sense to
-     * use alpha on track 0 if the skeleton pose is from the last frame render. */
-    alpha: number;
-    /** Seconds from 0 to the {@link #getMixDuration()} when mixing from the previous animation to this animation. May be
-     * slightly more than `mixDuration` when the mix is complete. */
-    mixTime: number;
-    /** Seconds for mixing from the previous animation to this animation. Defaults to the value provided by AnimationStateData
-     * {@link AnimationStateData#getMix()} based on the animation before this animation (if any).
-     *
-     * A mix duration of 0 still mixes out over one frame to provide the track entry being mixed out a chance to revert the
-     * properties it was animating.
-     *
-     * The `mixDuration` can be set manually rather than use the value from
-     * {@link AnimationStateData#getMix()}. In that case, the `mixDuration` can be set for a new
-     * track entry only before {@link AnimationState#update(float)} is first called.
-     *
-     * When using {@link AnimationState#addAnimation()} with a `delay` <= 0, note the
-     * {@link #delay} is set using the mix duration from the {@link AnimationStateData}, not a mix duration set
-     * afterward. */
-    mixDuration: number;
-    interruptAlpha: number;
-    totalAlpha: number;
-    /** Controls how properties keyed in the animation are mixed with lower tracks. Defaults to {@link MixBlend#replace}, which
-     * replaces the values from the lower tracks with the animation values. {@link MixBlend#add} adds the animation values to
-     * the values from the lower tracks.
-     *
-     * The `mixBlend` can be set for a new track entry only before {@link AnimationState#apply()} is first
-     * called. */
-    mixBlend: MixBlend;
-    timelineMode: number[];
-    timelineHoldMix: TrackEntry[];
-    timelinesRotation: number[];
-    reset(): void;
-    /** Uses {@link #trackTime} to compute the `animationTime`, which is between {@link #animationStart}
-     * and {@link #animationEnd}. When the `trackTime` is 0, the `animationTime` is equal to the
-     * `animationStart` time. */
-    getAnimationTime(): number;
-    setAnimationLast(animationLast: number): void;
-    /** Returns true if at least one loop has been completed.
-     *
-     * See {@link AnimationStateListener#complete()}. */
-    isComplete(): boolean;
-    /** Resets the rotation directions for mixing this entry's rotate timelines. This can be useful to avoid bones rotating the
-     * long way around when using {@link #alpha} and starting animations on other tracks.
-     *
-     * Mixing with {@link MixBlend#replace} involves finding a rotation between two others, which has two possible solutions:
-     * the short way or the long way around. The two rotations likely change over time, so which direction is the short or long
-     * way also changes. If the short way was always chosen, bones would flip to the other side when that direction became the
-     * long way. TrackEntry chooses the short way the first time it is applied and remembers that direction. */
-    resetRotationDirections(): void;
-}
-export declare class EventQueue {
-    objects: Array<any>;
-    drainDisabled: boolean;
-    animState: AnimationState;
-    constructor(animState: AnimationState);
-    start(entry: TrackEntry): void;
-    interrupt(entry: TrackEntry): void;
-    end(entry: TrackEntry): void;
-    dispose(entry: TrackEntry): void;
-    complete(entry: TrackEntry): void;
-    event(entry: TrackEntry, event: Event): void;
-    drain(): void;
-    clear(): void;
-}
-export declare enum EventType {
-    start = 0,
-    interrupt = 1,
-    end = 2,
-    dispose = 3,
-    complete = 4,
-    event = 5
-}
-/** The interface to implement for receiving TrackEntry events. It is always safe to call AnimationState methods when receiving
- * events.
- *
- * See TrackEntry {@link TrackEntry#listener} and AnimationState
- * {@link AnimationState#addListener()}. */
-export interface AnimationStateListener {
-    /** Invoked when this entry has been set as the current entry. */
-    start(entry: TrackEntry): void;
-    /** Invoked when another entry has replaced this entry as the current entry. This entry may continue being applied for
-     * mixing. */
-    interrupt(entry: TrackEntry): void;
-    /** Invoked when this entry is no longer the current entry and will never be applied again. */
-    end(entry: TrackEntry): void;
-    /** Invoked when this entry will be disposed. This may occur without the entry ever being set as the current entry.
-     * References to the entry should not be kept after dispose is called, as it may be destroyed or reused. */
-    dispose(entry: TrackEntry): void;
-    /** Invoked every time this entry's animation completes a loop. */
-    complete(entry: TrackEntry): void;
-    /** Invoked when this entry's animation triggers an event. */
-    event(entry: TrackEntry, event: Event): void;
-}
-export declare abstract class AnimationStateAdapter implements AnimationStateListener {
-    start(entry: TrackEntry): void;
-    interrupt(entry: TrackEntry): void;
-    end(entry: TrackEntry): void;
-    dispose(entry: TrackEntry): void;
-    complete(entry: TrackEntry): void;
-    event(entry: TrackEntry, event: Event): void;
-}

package/types/spine-core/AnimationStateData.d.ts

@@ -1,23 +0,0 @@
-import { SkeletonData } from "./SkeletonData";
-import { Animation } from "./Animation";
-import { Map } from "./Utils";
-/** Stores mix (crossfade) durations to be applied when {@link AnimationState} animations are changed. */
-export declare class AnimationStateData {
-    /** The SkeletonData to look up animations when they are specified by name. */
-    skeletonData: SkeletonData;
-    animationToMixTime: Map<number>;
-    /** The mix duration to use when no mix duration has been defined between two animations. */
-    defaultMix: number;
-    constructor(skeletonData: SkeletonData);
-    /** Sets a mix duration by animation name.
-     *
-     * See {@link #setMixWith()}. */
-    setMix(fromName: string, toName: string, duration: number): void;
-    /** Sets the mix duration when changing from the specified animation to the other.
-     *
-     * See {@link TrackEntry#mixDuration}. */
-    setMixWith(from: Animation, to: Animation, duration: number): void;
-    /** Returns the mix duration to use when changing from the specified animation to the other, or the {@link #defaultMix} if
-    * no mix duration has been set. */
-    getMix(from: Animation, to: Animation): number;
-}

package/types/spine-core/AssetManager.d.ts

@@ -1,36 +0,0 @@
-import { AssetType, Engine, Texture2D } from "@galacean/engine";
-import { Disposable, Map } from "./Utils";
-import { TextureAtlas } from "./TextureAtlas";
-import { AdaptiveTexture } from "../SpineLoader";
-export declare class AssetManager implements Disposable {
-    private _engine;
-    protected pathPrefix: string;
-    protected textureLoader: (texture: Texture2D) => AdaptiveTexture;
-    protected assets: Map<any>;
-    protected errors: Map<string>;
-    protected toLoad: number;
-    protected loaded: number;
-    protected rawDataUris: Map<string>;
-    onLoadComplete: any;
-    get engine(): Engine;
-    constructor(engine: Engine, pathPrefix?: string, textureLoader?: (texture: Texture2D) => AdaptiveTexture);
-    private downloadText;
-    protected downloadBinary(url: string, success: (data: Uint8Array) => void, error: (status: number, responseText: string) => void): void;
-    setRawDataURI(path: string, data: string): void;
-    loadBinary(path: string, success?: (path: string, binary: Uint8Array) => void, error?: (error: string) => void): void;
-    loadText(path: string, success?: (path: string, text: string) => void, error?: (error: string) => void): void;
-    loadImage(path: string, success?: (path: string, image: HTMLImageElement) => void, error?: (error: string) => void): void;
-    loadTexture(path: string, success?: (path: string, texture: AdaptiveTexture) => void, error?: (error: string) => void): void;
-    loadEngineTexture(path: string, type: AssetType, success?: (path: string, texture: AdaptiveTexture) => void, error?: (error: string) => void): void;
-    loadTextureAtlas(path: string, success?: (path: string, atlas: TextureAtlas) => void, error?: (error: string) => void): void;
-    get(path: string): any;
-    remove(path: string): void;
-    removeAll(): void;
-    isLoadingComplete(): boolean;
-    onLoad(): void;
-    getToLoad(): number;
-    getLoaded(): number;
-    dispose(): void;
-    hasErrors(): boolean;
-    getErrors(): Map<string>;
-}

package/types/spine-core/AtlasAttachmentLoader.d.ts

@@ -1,23 +0,0 @@
-import { AttachmentLoader } from "./attachments/AttachmentLoader";
-import { TextureAtlas } from "./TextureAtlas";
-import { Skin } from "./Skin";
-import { RegionAttachment } from "./attachments/RegionAttachment";
-import { MeshAttachment } from "./attachments/MeshAttachment";
-import { BoundingBoxAttachment } from "./attachments/BoundingBoxAttachment";
-import { PathAttachment } from "./attachments/PathAttachment";
-import { PointAttachment } from "./attachments/PointAttachment";
-import { ClippingAttachment } from "./attachments/ClippingAttachment";
-/** An {@link AttachmentLoader} that configures attachments using texture regions from an {@link TextureAtlas}.
- *
- * See [Loading skeleton data](http://esotericsoftware.com/spine-loading-skeleton-data#JSON-and-binary-data) in the
- * Spine Runtimes Guide. */
-export declare class AtlasAttachmentLoader implements AttachmentLoader {
-    atlas: TextureAtlas;
-    constructor(atlas: TextureAtlas);
-    newRegionAttachment(skin: Skin, name: string, path: string): RegionAttachment;
-    newMeshAttachment(skin: Skin, name: string, path: string): MeshAttachment;
-    newBoundingBoxAttachment(skin: Skin, name: string): BoundingBoxAttachment;
-    newPathAttachment(skin: Skin, name: string): PathAttachment;
-    newPointAttachment(skin: Skin, name: string): PointAttachment;
-    newClippingAttachment(skin: Skin, name: string): ClippingAttachment;
-}

package/types/spine-core/BlendMode.d.ts

@@ -1,7 +0,0 @@
-/** Determines how images are blended with existing pixels when drawn. */
-export declare enum BlendMode {
-    Normal = 0,
-    Additive = 1,
-    Multiply = 2,
-    Screen = 3
-}

package/types/spine-core/Bone.d.ts

@@ -1,110 +0,0 @@
-import { Updatable } from "./Updatable";
-import { BoneData } from "./BoneData";
-import { Skeleton } from "./Skeleton";
-import { Vector2 } from "./Utils";
-/** Stores a bone's current pose.
- *
- * A bone has a local transform which is used to compute its world transform. A bone also has an applied transform, which is a
- * local transform that can be applied to compute the world transform. The local transform and applied transform may differ if a
- * constraint or application code modifies the world transform after it was computed from the local transform. */
-export declare class Bone implements Updatable {
-    /** The bone's setup pose data. */
-    data: BoneData;
-    /** The skeleton this bone belongs to. */
-    skeleton: Skeleton;
-    /** The parent bone, or null if this is the root bone. */
-    parent: Bone;
-    /** The immediate children of this bone. */
-    children: Bone[];
-    /** The local x translation. */
-    x: number;
-    /** The local y translation. */
-    y: number;
-    /** The local rotation in degrees, counter clockwise. */
-    rotation: number;
-    /** The local scaleX. */
-    scaleX: number;
-    /** The local scaleY. */
-    scaleY: number;
-    /** The local shearX. */
-    shearX: number;
-    /** The local shearY. */
-    shearY: number;
-    /** The applied local x translation. */
-    ax: number;
-    /** The applied local y translation. */
-    ay: number;
-    /** The applied local rotation in degrees, counter clockwise. */
-    arotation: number;
-    /** The applied local scaleX. */
-    ascaleX: number;
-    /** The applied local scaleY. */
-    ascaleY: number;
-    /** The applied local shearX. */
-    ashearX: number;
-    /** The applied local shearY. */
-    ashearY: number;
-    /** If true, the applied transform matches the world transform. If false, the world transform has been modified since it was
-    * computed and {@link #updateAppliedTransform()} must be called before accessing the applied transform. */
-    appliedValid: boolean;
-    /** Part of the world transform matrix for the X axis. If changed, {@link #appliedValid} should be set to false. */
-    a: number;
-    /** Part of the world transform matrix for the Y axis. If changed, {@link #appliedValid} should be set to false. */
-    b: number;
-    /** Part of the world transform matrix for the X axis. If changed, {@link #appliedValid} should be set to false. */
-    c: number;
-    /** Part of the world transform matrix for the Y axis. If changed, {@link #appliedValid} should be set to false. */
-    d: number;
-    /** The world X position. If changed, {@link #appliedValid} should be set to false. */
-    worldY: number;
-    /** The world Y position. If changed, {@link #appliedValid} should be set to false. */
-    worldX: number;
-    sorted: boolean;
-    active: boolean;
-    /** @param parent May be null. */
-    constructor(data: BoneData, skeleton: Skeleton, parent: Bone);
-    /** Returns false when the bone has not been computed because {@link BoneData#skinRequired} is true and the
-    * {@link Skeleton#skin active skin} does not {@link Skin#bones contain} this bone. */
-    isActive(): boolean;
-    /** Same as {@link #updateWorldTransform()}. This method exists for Bone to implement {@link Updatable}. */
-    update(): void;
-    /** Computes the world transform using the parent bone and this bone's local transform.
-     *
-     * See {@link #updateWorldTransformWith()}. */
-    updateWorldTransform(): void;
-    /** Computes the world transform using the parent bone and the specified local transform. Child bones are not updated.
-     *
-     * See [World transforms](http://esotericsoftware.com/spine-runtime-skeletons#World-transforms) in the Spine
-     * Runtimes Guide. */
-    updateWorldTransformWith(x: number, y: number, rotation: number, scaleX: number, scaleY: number, shearX: number, shearY: number): void;
-    /** Sets this bone's local transform to the setup pose. */
-    setToSetupPose(): void;
-    /** The world rotation for the X axis, calculated using {@link #a} and {@link #c}. */
-    getWorldRotationX(): number;
-    /** The world rotation for the Y axis, calculated using {@link #b} and {@link #d}. */
-    getWorldRotationY(): number;
-    /** The magnitude (always positive) of the world scale X, calculated using {@link #a} and {@link #c}. */
-    getWorldScaleX(): number;
-    /** The magnitude (always positive) of the world scale Y, calculated using {@link #b} and {@link #d}. */
-    getWorldScaleY(): number;
-    /** Computes the applied transform values from the world transform. This allows the applied transform to be accessed after the
-     * world transform has been modified (by a constraint, {@link #rotateWorld()}, etc).
-     *
-     * If {@link #updateWorldTransform()} has been called for a bone and {@link #appliedValid} is false, then
-     * {@link #updateAppliedTransform()} must be called before accessing the applied transform.
-     *
-     * Some information is ambiguous in the world transform, such as -1,-1 scale versus 180 rotation. The applied transform after
-     * calling this method is equivalent to the local tranform used to compute the world transform, but may not be identical. */
-    updateAppliedTransform(): void;
-    /** Transforms a point from world coordinates to the bone's local coordinates. */
-    worldToLocal(world: Vector2): Vector2;
-    /** Transforms a point from the bone's local coordinates to world coordinates. */
-    localToWorld(local: Vector2): Vector2;
-    /** Transforms a world rotation to a local rotation. */
-    worldToLocalRotation(worldRotation: number): number;
-    /** Transforms a local rotation to a world rotation. */
-    localToWorldRotation(localRotation: number): number;
-    /** Rotates the world transform the specified amount and sets {@link #appliedValid} to false.
-     * {@link #updateWorldTransform()} will need to be called on any child bones, recursively, and any constraints reapplied. */
-    rotateWorld(degrees: number): void;
-}

package/types/spine-core/BoneData.d.ts

@@ -1,44 +0,0 @@
-import { Color } from "./Utils";
-/** Stores the setup pose for a {@link Bone}. */
-export declare class BoneData {
-    /** The index of the bone in {@link Skeleton#getBones()}. */
-    index: number;
-    /** The name of the bone, which is unique across all bones in the skeleton. */
-    name: string;
-    /** @returns May be null. */
-    parent: BoneData;
-    /** The bone's length. */
-    length: number;
-    /** The local x translation. */
-    x: number;
-    /** The local y translation. */
-    y: number;
-    /** The local rotation. */
-    rotation: number;
-    /** The local scaleX. */
-    scaleX: number;
-    /** The local scaleY. */
-    scaleY: number;
-    /** The local shearX. */
-    shearX: number;
-    /** The local shearX. */
-    shearY: number;
-    /** The transform mode for how parent world transforms affect this bone. */
-    transformMode: TransformMode;
-    /** When true, {@link Skeleton#updateWorldTransform()} only updates this bone if the {@link Skeleton#skin} contains this
-    * bone.
-    * @see Skin#bones */
-    skinRequired: boolean;
-    /** The color of the bone as it was in Spine. Available only when nonessential data was exported. Bones are not usually
-     * rendered at runtime. */
-    color: Color;
-    constructor(index: number, name: string, parent: BoneData);
-}
-/** Determines how a bone inherits world transforms from parent bones. */
-export declare enum TransformMode {
-    Normal = 0,
-    OnlyTranslation = 1,
-    NoRotationOrReflection = 2,
-    NoScale = 3,
-    NoScaleOrReflection = 4
-}

package/types/spine-core/ConstraintData.d.ts

@@ -1,7 +0,0 @@
-/** The base class for all constraint datas. */
-export declare abstract class ConstraintData {
-    name: string;
-    order: number;
-    skinRequired: boolean;
-    constructor(name: string, order: number, skinRequired: boolean);
-}

package/types/spine-core/Event.d.ts

@@ -1,16 +0,0 @@
-import { EventData } from "./EventData";
-/** Stores the current pose values for an {@link Event}.
- *
- * See Timeline {@link Timeline#apply()},
- * AnimationStateListener {@link AnimationStateListener#event()}, and
- * [Events](http://esotericsoftware.com/spine-events) in the Spine User Guide. */
-export declare class Event {
-    data: EventData;
-    intValue: number;
-    floatValue: number;
-    stringValue: string;
-    time: number;
-    volume: number;
-    balance: number;
-    constructor(time: number, data: EventData);
-}

package/types/spine-core/EventData.d.ts

@@ -1,13 +0,0 @@
-/** Stores the setup pose values for an {@link Event}.
- *
- * See [Events](http://esotericsoftware.com/spine-events) in the Spine User Guide. */
-export declare class EventData {
-    name: string;
-    intValue: number;
-    floatValue: number;
-    stringValue: string;
-    audioPath: string;
-    volume: number;
-    balance: number;
-    constructor(name: string);
-}