@fusion.dev/helix-headless 0.160.0 → 0.162.0

package/types/jsx.d.ts

@@ -3405,6 +3405,10 @@ what the controls drive rather than the mechanism. */
   /** The name of the group of controls, read by screen readers, which names
 what the controls drive rather than the mechanism. */
   controlsLabel?: (HelixHeadlessCanvas["controlsLabel"]) | undefined;
+  /** What screen readers hear after a copy, with `{count}` for the cards copied. */
+  "copied-label"?: (HelixHeadlessCanvas["copiedLabel"]) | undefined;
+  /** What screen readers hear after a copy, with `{count}` for the cards copied. */
+  copiedLabel?: (HelixHeadlessCanvas["copiedLabel"]) | undefined;
   /** The board's name where `label` is empty. */
   "fallback-label"?: (HelixHeadlessCanvas["fallbackLabel"]) | undefined;
   /** The board's name where `label` is empty. */
@@ -3492,6 +3496,10 @@ walk the cards. */
   /** The text announced when a connection's end is picked up, with `{from}` and
 `{to}`. */
   reconnectingLabel?: (HelixHeadlessCanvas["reconnectingLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is made again. */
+  "redone-label"?: (HelixHeadlessCanvas["redoneLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is made again. */
+  redoneLabel?: (HelixHeadlessCanvas["redoneLabel"]) | undefined;
   /** What screen readers hear after a key resizes a card, with `{name}` for the
 card and `{width}` and `{height}` for its new size, in the document's
 units. */
@@ -3594,6 +3602,10 @@ told the same. A tone left out is not read. */
   "two-finger-hint-label"?: (HelixHeadlessCanvas["twoFingerHintLabel"]) | undefined;
   /** The hint shown when one finger swipes over the board with `gestures="cooperative"`. */
   twoFingerHintLabel?: (HelixHeadlessCanvas["twoFingerHintLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is undone. */
+  "undone-label"?: (HelixHeadlessCanvas["undoneLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is undone. */
+  undoneLabel?: (HelixHeadlessCanvas["undoneLabel"]) | undefined;
   /** The line shown while the board, with `gestures="activate"`, has the gestures. */
   "using-label"?: (HelixHeadlessCanvas["usingLabel"]) | undefined;
   /** The line shown while the board, with `gestures="activate"`, has the gestures. */
@@ -3841,6 +3853,10 @@ what the controls drive rather than the mechanism. */
   /** The name of the group of controls, read by screen readers, which names
 what the controls drive rather than the mechanism. */
   "prop:controlsLabel"?: (HelixHeadlessCanvas["controlsLabel"]) | undefined;
+  /** What screen readers hear after a copy, with `{count}` for the cards copied. */
+  "attr:copied-label"?: (HelixHeadlessCanvas["copiedLabel"]) | undefined;
+  /** What screen readers hear after a copy, with `{count}` for the cards copied. */
+  "prop:copiedLabel"?: (HelixHeadlessCanvas["copiedLabel"]) | undefined;
   /** The board's name where `label` is empty. */
   "attr:fallback-label"?: (HelixHeadlessCanvas["fallbackLabel"]) | undefined;
   /** The board's name where `label` is empty. */
@@ -3928,6 +3944,10 @@ walk the cards. */
   /** The text announced when a connection's end is picked up, with `{from}` and
 `{to}`. */
   "prop:reconnectingLabel"?: (HelixHeadlessCanvas["reconnectingLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is made again. */
+  "attr:redone-label"?: (HelixHeadlessCanvas["redoneLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is made again. */
+  "prop:redoneLabel"?: (HelixHeadlessCanvas["redoneLabel"]) | undefined;
   /** What screen readers hear after a key resizes a card, with `{name}` for the
 card and `{width}` and `{height}` for its new size, in the document's
 units. */
@@ -4030,6 +4050,10 @@ told the same. A tone left out is not read. */
   "attr:two-finger-hint-label"?: (HelixHeadlessCanvas["twoFingerHintLabel"]) | undefined;
   /** The hint shown when one finger swipes over the board with `gestures="cooperative"`. */
   "prop:twoFingerHintLabel"?: (HelixHeadlessCanvas["twoFingerHintLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is undone. */
+  "attr:undone-label"?: (HelixHeadlessCanvas["undoneLabel"]) | undefined;
+  /** What screen readers hear after a move or a resize is undone. */
+  "prop:undoneLabel"?: (HelixHeadlessCanvas["undoneLabel"]) | undefined;
   /** The line shown while the board, with `gestures="activate"`, has the gestures. */
   "attr:using-label"?: (HelixHeadlessCanvas["usingLabel"]) | undefined;
   /** The line shown while the board, with `gestures="activate"`, has the gestures. */
@@ -5281,6 +5305,10 @@ is the way back, and that is a part inside the shadow tree where a
 stylesheet can already reach it. Measured rather than assumed: `label,
 pinned` after upgrade against `label` from the server. */
   pinned?: (HelixHeadlessChat["pinned"]) | undefined;
+  /** The words on the button that returns to the newest turn, where `resume` is empty. */
+  "resume-label"?: (HelixHeadlessChat["resumeLabel"]) | undefined;
+  /** The words on the button that returns to the newest turn, where `resume` is empty. */
+  resumeLabel?: (HelixHeadlessChat["resumeLabel"]) | undefined;
   /** How near the bottom still counts as being at it, in pixels.
 
 A hook rather than a constant, because the right number depends on how tall
@@ -5443,6 +5471,10 @@ is the way back, and that is a part inside the shadow tree where a
 stylesheet can already reach it. Measured rather than assumed: `label,
 pinned` after upgrade against `label` from the server. */
   "prop:pinned"?: (HelixHeadlessChat["pinned"]) | undefined;
+  /** The words on the button that returns to the newest turn, where `resume` is empty. */
+  "attr:resume-label"?: (HelixHeadlessChat["resumeLabel"]) | undefined;
+  /** The words on the button that returns to the newest turn, where `resume` is empty. */
+  "prop:resumeLabel"?: (HelixHeadlessChat["resumeLabel"]) | undefined;
   /** How near the bottom still counts as being at it, in pixels.
 
 A hook rather than a constant, because the right number depends on how tall
@@ -6014,6 +6046,18 @@ Here rather than on each control. */
   textContent?: (string | number) | undefined;
 };
 
+/** `HelixHeadlessCodeBlock` component event */
+export type HelixHeadlessCodeBlockElementEvent<E = Event> = TypedEvent<
+  HelixHeadlessCodeBlock,
+  E
+>;
+/** `helix-before-toggle` event type */
+export type HelixHeadlessCodeBlockHelixBeforeToggleElementEvent =
+  HelixHeadlessCodeBlockElementEvent<HelixBeforeToggleEvent>;
+/** `helix-toggle` event type */
+export type HelixHeadlessCodeBlockHelixToggleElementEvent =
+  HelixHeadlessCodeBlockElementEvent<HelixToggleEvent>;
+
 export type HelixHeadlessCodeBlockProps = {
   /** The name of a block that scrolls, which is a tab stop while it does.
 
@@ -6100,6 +6144,14 @@ copy, which takes the code alone. Reflected, because the stylesheet lays
 the gutter out beside the code. A diff numbers its lines from its hunks
 whether or not this is set. */
   lineNumbers?: (HelixHeadlessCodeBlock["lineNumbers"]) | undefined;
+  /** The lines to mark, as numbers and ranges counted from 1, such as `2, 4-6`.
+Each run is drawn as a band behind its lines. Not for a diff, which marks
+its own changes. */
+  "mark-lines"?: (HelixHeadlessCodeBlock["markLines"]) | undefined;
+  /** The lines to mark, as numbers and ranges counted from 1, such as `2, 4-6`.
+Each run is drawn as a band behind its lines. Not for a diff, which marks
+its own changes. */
+  markLines?: (HelixHeadlessCodeBlock["markLines"]) | undefined;
   /** Whether to leave the copy button off.
 
 Negative, which is not a style choice. A boolean attribute is true whenever
@@ -6146,6 +6198,22 @@ Absent is unified, each removal above its replacement, which fits any
 width. `split` sets the old version beside the new one. Optional rather
 than defaulted, so the host carries no attribute the consumer did not write. */
   variant?: (HelixHeadlessCodeBlock["variant"]) | undefined;
+  /** Whether long lines wrap. Without it they scroll.
+
+Off by default, so long lines scroll, because a line break can be
+significant in code and a wrapped line reads as two. For prose-like code,
+such as a long command or a log line, a wrap reads better than a scroll.
+With `line-numbers`, each number stands beside the line it numbers
+however many rows that line takes. Reflected, because the stylesheet
+wraps the lines. */
+  wrap?: (HelixHeadlessCodeBlock["wrap"]) | undefined;
+  /** The wrap button's name, which it keeps whether it is pressed or not. */
+  "wrap-label"?: (HelixHeadlessCodeBlock["wrapLabel"]) | undefined;
+  /** The wrap button's name, which it keeps whether it is pressed or not. */
+  wrapLabel?: (HelixHeadlessCodeBlock["wrapLabel"]) | undefined;
+  /** Whether the header has a button that wraps the lines and unwraps them. The
+block draws a header for it even with no name. */
+  wrappable?: (HelixHeadlessCodeBlock["wrappable"]) | undefined;
   /** Turns the code into highlighted markup, which the block draws in place of
 the plain text.
 
@@ -6168,6 +6236,13 @@ in the slot, so the copy button copies it as written and a reader without
 the script still has it. Not called on a server, which has no code to
 read, nor for a diff. */
   highlight?: (HelixHeadlessCodeBlock["highlight"]) | undefined;
+
+  /** The wrap button was pressed, with the `wrap` it asks for in `detail.checked`. Cancelable: cancel it to keep the lines as they are. */
+  "onhelix-before-toggle"?: ((
+    e: HelixHeadlessCodeBlockHelixBeforeToggleElementEvent,
+  ) => void) | undefined;
+  /** Fired after the wrap button changed `wrap`, with the new value in `detail.checked`. */
+  "onhelix-toggle"?: ((e: HelixHeadlessCodeBlockHelixToggleElementEvent) => void) | undefined;
 };
 
 export type HelixHeadlessCodeBlockSolidJsProps = {
@@ -6256,6 +6331,14 @@ copy, which takes the code alone. Reflected, because the stylesheet lays
 the gutter out beside the code. A diff numbers its lines from its hunks
 whether or not this is set. */
   "prop:lineNumbers"?: (HelixHeadlessCodeBlock["lineNumbers"]) | undefined;
+  /** The lines to mark, as numbers and ranges counted from 1, such as `2, 4-6`.
+Each run is drawn as a band behind its lines. Not for a diff, which marks
+its own changes. */
+  "attr:mark-lines"?: (HelixHeadlessCodeBlock["markLines"]) | undefined;
+  /** The lines to mark, as numbers and ranges counted from 1, such as `2, 4-6`.
+Each run is drawn as a band behind its lines. Not for a diff, which marks
+its own changes. */
+  "prop:markLines"?: (HelixHeadlessCodeBlock["markLines"]) | undefined;
   /** Whether to leave the copy button off.
 
 Negative, which is not a style choice. A boolean attribute is true whenever
@@ -6302,6 +6385,22 @@ Absent is unified, each removal above its replacement, which fits any
 width. `split` sets the old version beside the new one. Optional rather
 than defaulted, so the host carries no attribute the consumer did not write. */
   "prop:variant"?: (HelixHeadlessCodeBlock["variant"]) | undefined;
+  /** Whether long lines wrap. Without it they scroll.
+
+Off by default, so long lines scroll, because a line break can be
+significant in code and a wrapped line reads as two. For prose-like code,
+such as a long command or a log line, a wrap reads better than a scroll.
+With `line-numbers`, each number stands beside the line it numbers
+however many rows that line takes. Reflected, because the stylesheet
+wraps the lines. */
+  "prop:wrap"?: (HelixHeadlessCodeBlock["wrap"]) | undefined;
+  /** The wrap button's name, which it keeps whether it is pressed or not. */
+  "attr:wrap-label"?: (HelixHeadlessCodeBlock["wrapLabel"]) | undefined;
+  /** The wrap button's name, which it keeps whether it is pressed or not. */
+  "prop:wrapLabel"?: (HelixHeadlessCodeBlock["wrapLabel"]) | undefined;
+  /** Whether the header has a button that wraps the lines and unwraps them. The
+block draws a header for it even with no name. */
+  "prop:wrappable"?: (HelixHeadlessCodeBlock["wrappable"]) | undefined;
   /** Turns the code into highlighted markup, which the block draws in place of
 the plain text.
 
@@ -6324,6 +6423,14 @@ in the slot, so the copy button copies it as written and a reader without
 the script still has it. Not called on a server, which has no code to
 read, nor for a diff. */
   "prop:highlight"?: (HelixHeadlessCodeBlock["highlight"]) | undefined;
+  /** The wrap button was pressed, with the `wrap` it asks for in `detail.checked`. Cancelable: cancel it to keep the lines as they are. */
+  "on:helix-before-toggle"?: ((
+    e: HelixHeadlessCodeBlockHelixBeforeToggleElementEvent,
+  ) => void) | undefined;
+  /** Fired after the wrap button changed `wrap`, with the new value in `detail.checked`. */
+  "on:helix-toggle"?: ((
+    e: HelixHeadlessCodeBlockHelixToggleElementEvent,
+  ) => void) | undefined;
 
   /** Set the innerHTML of the element */
   innerHTML?: (string) | undefined;
@@ -27545,6 +27652,22 @@ consumer's to set. */
   "corner-label"?: (HelixHeadlessSplitter["cornerLabel"]) | undefined;
   /** The name of the handle where two dividers cross, read by screen readers. */
   cornerLabel?: (HelixHeadlessSplitter["cornerLabel"]) | undefined;
+  /** What the handle where two dividers cross says it is set to, both dividers
+at once: `{across}` is where the divider that runs down stands, and
+`{down}` where the one that runs across stands, each a percentage.
+
+**Both, because the handle moves both**, and a number names one: the
+handle's `aria-valuenow` is the divider its `aria-orientation` names, and
+these words are the whole of where it is. */
+  "corner-value-label"?: (HelixHeadlessSplitter["cornerValueLabel"]) | undefined;
+  /** What the handle where two dividers cross says it is set to, both dividers
+at once: `{across}` is where the divider that runs down stands, and
+`{down}` where the one that runs across stands, each a percentage.
+
+**Both, because the handle moves both**, and a number names one: the
+handle's `aria-valuenow` is the divider its `aria-orientation` names, and
+these words are the whole of where it is. */
+  cornerValueLabel?: (HelixHeadlessSplitter["cornerValueLabel"]) | undefined;
   /** Which pane starts shut, when `collapsed` is not set. */
   "default-collapsed"?: (HelixHeadlessSplitter["defaultCollapsed"]) | undefined;
   /** Which pane starts shut, when `collapsed` is not set. */
@@ -27689,6 +27812,22 @@ consumer's to set. */
   "attr:corner-label"?: (HelixHeadlessSplitter["cornerLabel"]) | undefined;
   /** The name of the handle where two dividers cross, read by screen readers. */
   "prop:cornerLabel"?: (HelixHeadlessSplitter["cornerLabel"]) | undefined;
+  /** What the handle where two dividers cross says it is set to, both dividers
+at once: `{across}` is where the divider that runs down stands, and
+`{down}` where the one that runs across stands, each a percentage.
+
+**Both, because the handle moves both**, and a number names one: the
+handle's `aria-valuenow` is the divider its `aria-orientation` names, and
+these words are the whole of where it is. */
+  "attr:corner-value-label"?: (HelixHeadlessSplitter["cornerValueLabel"]) | undefined;
+  /** What the handle where two dividers cross says it is set to, both dividers
+at once: `{across}` is where the divider that runs down stands, and
+`{down}` where the one that runs across stands, each a percentage.
+
+**Both, because the handle moves both**, and a number names one: the
+handle's `aria-valuenow` is the divider its `aria-orientation` names, and
+these words are the whole of where it is. */
+  "prop:cornerValueLabel"?: (HelixHeadlessSplitter["cornerValueLabel"]) | undefined;
   /** Which pane starts shut, when `collapsed` is not set. */
   "attr:default-collapsed"?: (HelixHeadlessSplitter["defaultCollapsed"]) | undefined;
   /** Which pane starts shut, when `collapsed` is not set. */
@@ -28884,6 +29023,12 @@ export type HelixHeadlessTableElementEvent<E = Event> = TypedEvent<
 /** `helix-before-reorder` event type */
 export type HelixHeadlessTableHelixBeforeReorderElementEvent =
   HelixHeadlessTableElementEvent<HelixBeforeReorderEvent>;
+/** `helix-before-toggle` event type */
+export type HelixHeadlessTableHelixBeforeToggleElementEvent =
+  HelixHeadlessTableElementEvent<HelixBeforeToggleEvent>;
+/** `helix-load-more` event type */
+export type HelixHeadlessTableHelixLoadMoreElementEvent =
+  HelixHeadlessTableElementEvent<HelixLoadMoreEvent>;
 /** `helix-reorder` event type */
 export type HelixHeadlessTableHelixReorderElementEvent =
   HelixHeadlessTableElementEvent<HelixReorderEvent>;
@@ -28899,6 +29044,9 @@ export type HelixHeadlessTableHelixSortElementEvent =
 /** `helix-sorted` event type */
 export type HelixHeadlessTableHelixSortedElementEvent =
   HelixHeadlessTableElementEvent<HelixSortedEvent>;
+/** `helix-toggle` event type */
+export type HelixHeadlessTableHelixToggleElementEvent =
+  HelixHeadlessTableElementEvent<HelixToggleEvent>;
 
 export type HelixHeadlessTableProps = {
   /** The word for an ascending sort, in a `sorted-label` that writes `{order}`. */
@@ -28940,6 +29088,12 @@ and a list here would be a second way to say what that says. This table's
 cells are markup, and a table written as rows of cells with no column
 declared in it has nowhere else to be sized from. */
   columns?: (HelixHeadlessTable["columns"]) | undefined;
+  /** The keys of the rows whose rows are shown at the start, separated by
+commas. Used until `expanded` is set. */
+  "default-expanded"?: (HelixHeadlessTable["defaultExpanded"]) | undefined;
+  /** The keys of the rows whose rows are shown at the start, separated by
+commas. Used until `expanded` is set. */
+  defaultExpanded?: (HelixHeadlessTable["defaultExpanded"]) | undefined;
   /** The keys selected at the start, separated by commas. Used until `selected`
 is set. */
   "default-selected"?: (HelixHeadlessTable["defaultSelected"]) | undefined;
@@ -28974,6 +29128,18 @@ While it is set, a line after the rows shows it, or your own content in the
 `error` slot, in place of the empty and loading lines, and the live region
 says it. */
   errorText?: (HelixHeadlessTable["errorText"]) | undefined;
+  /** The name of the heading over the disclosure buttons. */
+  "expand-column-label"?: (HelixHeadlessTable["expandColumnLabel"]) | undefined;
+  /** The name of the heading over the disclosure buttons. */
+  expandColumnLabel?: (HelixHeadlessTable["expandColumnLabel"]) | undefined;
+  /** The keys of the rows whose rows are shown, separated by commas, in a table
+whose rows nest. A press on a row's disclosure button asks first, and
+`default-expanded` seeds what this element then owns. */
+  expanded?: (HelixHeadlessTable["expanded"]) | undefined;
+  /** The name of a row's disclosure button. `{row}` is the words of the row's first cell. */
+  "expand-row-label"?: (HelixHeadlessTable["expandRowLabel"]) | undefined;
+  /** The name of a row's disclosure button. `{row}` is the words of the row's first cell. */
+  expandRowLabel?: (HelixHeadlessTable["expandRowLabel"]) | undefined;
   /** The table's name where neither `label` nor an `aria-label` or
 `aria-labelledby` on the host gives it one. */
   "fallback-label"?: (HelixHeadlessTable["fallbackLabel"]) | undefined;
@@ -28993,6 +29159,12 @@ cells, which is the one way a cell of your markup can take focus. */
 An `aria-label` or `aria-labelledby` on the host names the table too, and
 wins over this. */
   label?: (HelixHeadlessTable["label"]) | undefined;
+  /** Sends `helix-load-more` once the end of the table comes within a screen
+of view, so you can add the next rows as a reader nears them. */
+  "load-more"?: (HelixHeadlessTable["loadMore"]) | undefined;
+  /** Sends `helix-load-more` once the end of the table comes within a screen
+of view, so you can add the next rows as a reader nears them. */
+  loadMore?: (HelixHeadlessTable["loadMore"]) | undefined;
   /** What screen readers hear each time a key moves a held row, in a
 `reorderable` table. `{name}` is the row's words, `{position}` the place it
 would go, counting from 1, and `{count}` the number of rows. */
@@ -29027,6 +29199,12 @@ table moves no row itself: you move your rows on `helix-reorder`. */
   "select-all-label"?: (HelixHeadlessTable["selectAllLabel"]) | undefined;
   /** The name of the checkbox in the heading that selects every row. */
   selectAllLabel?: (HelixHeadlessTable["selectAllLabel"]) | undefined;
+  /** The name of the heading over the checkboxes under
+`selection-mode="single"`, where it holds no checkbox of its own. */
+  "select-column-label"?: (HelixHeadlessTable["selectColumnLabel"]) | undefined;
+  /** The name of the heading over the checkboxes under
+`selection-mode="single"`, where it holds no checkbox of its own. */
+  selectColumnLabel?: (HelixHeadlessTable["selectColumnLabel"]) | undefined;
   /** The keys of the selected rows, separated by commas.
 
 A reader's press fires `helix-select` first, and refusing it leaves the
@@ -29043,6 +29221,20 @@ rows are chosen, written in the locale, and a language that needs plural
 forms writes them: `{count, plural, one {# wybrany} few {# wybrane} many
 {# wybranych} other {# wybranego}}`. */
   selectedLabel?: (HelixHeadlessTable["selectedLabel"]) | undefined;
+  /** What a press on a row, or in a `grid` table a key that moves to one, does
+to the rows already selected: `toggle`, the default, leaves them to the
+checkboxes, and `replace` selects the row alone. */
+  "selection-behavior"?: (HelixHeadlessTable["selectionBehavior"]) | undefined;
+  /** What a press on a row, or in a `grid` table a key that moves to one, does
+to the rows already selected: `toggle`, the default, leaves them to the
+checkboxes, and `replace` selects the row alone. */
+  selectionBehavior?: (HelixHeadlessTable["selectionBehavior"]) | undefined;
+  /** How many rows a `selectable` table selects: `multiple`, the default, or
+`single`, one at a time. */
+  "selection-mode"?: (HelixHeadlessTable["selectionMode"]) | undefined;
+  /** How many rows a `selectable` table selects: `multiple`, the default, or
+`single`, one at a time. */
+  selectionMode?: (HelixHeadlessTable["selectionMode"]) | undefined;
   /** The name of a row's checkbox. `{row}` is replaced with the words of the
 row's first cell. */
   "select-row-label"?: (HelixHeadlessTable["selectRowLabel"]) | undefined;
@@ -29090,6 +29282,14 @@ say that without the component knowing what a row looks like. */
   "onhelix-before-reorder"?: ((
     e: HelixHeadlessTableHelixBeforeReorderElementEvent,
   ) => void) | undefined;
+  /** Fired from a row when its disclosure button is pressed, with whether it would be open in `detail.checked`. Cancelable: cancel it to keep the row as it is. */
+  "onhelix-before-toggle"?: ((
+    e: HelixHeadlessTableHelixBeforeToggleElementEvent,
+  ) => void) | undefined;
+  /** Fired, in a table with `load-more`, when the end of the table comes within a screen of view, once for each number of rows. */
+  "onhelix-load-more"?: ((
+    e: HelixHeadlessTableHelixLoadMoreElementEvent,
+  ) => void) | undefined;
   /** Fired after `helix-before-reorder` when nobody canceled it. Move your rows to the order in `keys`. Cancelable: cancel it to say the move did not happen. */
   "onhelix-reorder"?: ((e: HelixHeadlessTableHelixReorderElementEvent) => void) | undefined;
   /** The selection is about to change. The event carries every selected key, separated by commas. Cancelable: cancel it to keep the current selection. */
@@ -29100,6 +29300,8 @@ say that without the component knowing what a row looks like. */
   "onhelix-sort"?: ((e: HelixHeadlessTableHelixSortElementEvent) => void) | undefined;
   /** Fired after the sort order changes, with the new order. */
   "onhelix-sorted"?: ((e: HelixHeadlessTableHelixSortedElementEvent) => void) | undefined;
+  /** Fired from a row once the rows under it are shown or hidden, with whether it is open in `detail.checked`. */
+  "onhelix-toggle"?: ((e: HelixHeadlessTableHelixToggleElementEvent) => void) | undefined;
 };
 
 export type HelixHeadlessTableSolidJsProps = {
@@ -29142,6 +29344,12 @@ and a list here would be a second way to say what that says. This table's
 cells are markup, and a table written as rows of cells with no column
 declared in it has nowhere else to be sized from. */
   "prop:columns"?: (HelixHeadlessTable["columns"]) | undefined;
+  /** The keys of the rows whose rows are shown at the start, separated by
+commas. Used until `expanded` is set. */
+  "attr:default-expanded"?: (HelixHeadlessTable["defaultExpanded"]) | undefined;
+  /** The keys of the rows whose rows are shown at the start, separated by
+commas. Used until `expanded` is set. */
+  "prop:defaultExpanded"?: (HelixHeadlessTable["defaultExpanded"]) | undefined;
   /** The keys selected at the start, separated by commas. Used until `selected`
 is set. */
   "attr:default-selected"?: (HelixHeadlessTable["defaultSelected"]) | undefined;
@@ -29176,6 +29384,18 @@ While it is set, a line after the rows shows it, or your own content in the
 `error` slot, in place of the empty and loading lines, and the live region
 says it. */
   "prop:errorText"?: (HelixHeadlessTable["errorText"]) | undefined;
+  /** The name of the heading over the disclosure buttons. */
+  "attr:expand-column-label"?: (HelixHeadlessTable["expandColumnLabel"]) | undefined;
+  /** The name of the heading over the disclosure buttons. */
+  "prop:expandColumnLabel"?: (HelixHeadlessTable["expandColumnLabel"]) | undefined;
+  /** The keys of the rows whose rows are shown, separated by commas, in a table
+whose rows nest. A press on a row's disclosure button asks first, and
+`default-expanded` seeds what this element then owns. */
+  "prop:expanded"?: (HelixHeadlessTable["expanded"]) | undefined;
+  /** The name of a row's disclosure button. `{row}` is the words of the row's first cell. */
+  "attr:expand-row-label"?: (HelixHeadlessTable["expandRowLabel"]) | undefined;
+  /** The name of a row's disclosure button. `{row}` is the words of the row's first cell. */
+  "prop:expandRowLabel"?: (HelixHeadlessTable["expandRowLabel"]) | undefined;
   /** The table's name where neither `label` nor an `aria-label` or
 `aria-labelledby` on the host gives it one. */
   "attr:fallback-label"?: (HelixHeadlessTable["fallbackLabel"]) | undefined;
@@ -29195,6 +29415,12 @@ cells, which is the one way a cell of your markup can take focus. */
 An `aria-label` or `aria-labelledby` on the host names the table too, and
 wins over this. */
   "prop:label"?: (HelixHeadlessTable["label"]) | undefined;
+  /** Sends `helix-load-more` once the end of the table comes within a screen
+of view, so you can add the next rows as a reader nears them. */
+  "bool:load-more"?: (HelixHeadlessTable["loadMore"]) | undefined;
+  /** Sends `helix-load-more` once the end of the table comes within a screen
+of view, so you can add the next rows as a reader nears them. */
+  "prop:loadMore"?: (HelixHeadlessTable["loadMore"]) | undefined;
   /** What screen readers hear each time a key moves a held row, in a
 `reorderable` table. `{name}` is the row's words, `{position}` the place it
 would go, counting from 1, and `{count}` the number of rows. */
@@ -29229,6 +29455,12 @@ table moves no row itself: you move your rows on `helix-reorder`. */
   "attr:select-all-label"?: (HelixHeadlessTable["selectAllLabel"]) | undefined;
   /** The name of the checkbox in the heading that selects every row. */
   "prop:selectAllLabel"?: (HelixHeadlessTable["selectAllLabel"]) | undefined;
+  /** The name of the heading over the checkboxes under
+`selection-mode="single"`, where it holds no checkbox of its own. */
+  "attr:select-column-label"?: (HelixHeadlessTable["selectColumnLabel"]) | undefined;
+  /** The name of the heading over the checkboxes under
+`selection-mode="single"`, where it holds no checkbox of its own. */
+  "prop:selectColumnLabel"?: (HelixHeadlessTable["selectColumnLabel"]) | undefined;
   /** The keys of the selected rows, separated by commas.
 
 A reader's press fires `helix-select` first, and refusing it leaves the
@@ -29245,6 +29477,20 @@ rows are chosen, written in the locale, and a language that needs plural
 forms writes them: `{count, plural, one {# wybrany} few {# wybrane} many
 {# wybranych} other {# wybranego}}`. */
   "prop:selectedLabel"?: (HelixHeadlessTable["selectedLabel"]) | undefined;
+  /** What a press on a row, or in a `grid` table a key that moves to one, does
+to the rows already selected: `toggle`, the default, leaves them to the
+checkboxes, and `replace` selects the row alone. */
+  "attr:selection-behavior"?: (HelixHeadlessTable["selectionBehavior"]) | undefined;
+  /** What a press on a row, or in a `grid` table a key that moves to one, does
+to the rows already selected: `toggle`, the default, leaves them to the
+checkboxes, and `replace` selects the row alone. */
+  "prop:selectionBehavior"?: (HelixHeadlessTable["selectionBehavior"]) | undefined;
+  /** How many rows a `selectable` table selects: `multiple`, the default, or
+`single`, one at a time. */
+  "attr:selection-mode"?: (HelixHeadlessTable["selectionMode"]) | undefined;
+  /** How many rows a `selectable` table selects: `multiple`, the default, or
+`single`, one at a time. */
+  "prop:selectionMode"?: (HelixHeadlessTable["selectionMode"]) | undefined;
   /** The name of a row's checkbox. `{row}` is replaced with the words of the
 row's first cell. */
   "attr:select-row-label"?: (HelixHeadlessTable["selectRowLabel"]) | undefined;
@@ -29291,6 +29537,14 @@ say that without the component knowing what a row looks like. */
   "on:helix-before-reorder"?: ((
     e: HelixHeadlessTableHelixBeforeReorderElementEvent,
   ) => void) | undefined;
+  /** Fired from a row when its disclosure button is pressed, with whether it would be open in `detail.checked`. Cancelable: cancel it to keep the row as it is. */
+  "on:helix-before-toggle"?: ((
+    e: HelixHeadlessTableHelixBeforeToggleElementEvent,
+  ) => void) | undefined;
+  /** Fired, in a table with `load-more`, when the end of the table comes within a screen of view, once for each number of rows. */
+  "on:helix-load-more"?: ((
+    e: HelixHeadlessTableHelixLoadMoreElementEvent,
+  ) => void) | undefined;
   /** Fired after `helix-before-reorder` when nobody canceled it. Move your rows to the order in `keys`. Cancelable: cancel it to say the move did not happen. */
   "on:helix-reorder"?: ((e: HelixHeadlessTableHelixReorderElementEvent) => void) | undefined;
   /** The selection is about to change. The event carries every selected key, separated by commas. Cancelable: cancel it to keep the current selection. */
@@ -29303,6 +29557,8 @@ say that without the component knowing what a row looks like. */
   "on:helix-sort"?: ((e: HelixHeadlessTableHelixSortElementEvent) => void) | undefined;
   /** Fired after the sort order changes, with the new order. */
   "on:helix-sorted"?: ((e: HelixHeadlessTableHelixSortedElementEvent) => void) | undefined;
+  /** Fired from a row once the rows under it are shown or hidden, with whether it is open in `detail.checked`. */
+  "on:helix-toggle"?: ((e: HelixHeadlessTableHelixToggleElementEvent) => void) | undefined;
 
   /** Set the innerHTML of the element */
   innerHTML?: (string) | undefined;
@@ -29321,6 +29577,10 @@ reached. */
   /** The URL a press on the row follows, which makes the whole row a link.
 Empty, the default, leaves presses to the row's cells. */
   href?: (HelixHeadlessTableRow["href"]) | undefined;
+  /** The key of the row this one sits under, in a table whose rows nest: that
+row's `value`, or its place among the rows where it has none. Empty, the
+default, is a row at the top. */
+  parent?: (HelixHeadlessTableRow["parent"]) | undefined;
   /** The `rel` of the row's link. You set it yourself, as on an anchor. */
   rel?: (HelixHeadlessTableRow["rel"]) | undefined;
   /** Where the row's link opens, such as `_blank`. */
@@ -29341,6 +29601,10 @@ reached. */
   /** The URL a press on the row follows, which makes the whole row a link.
 Empty, the default, leaves presses to the row's cells. */
   "prop:href"?: (HelixHeadlessTableRow["href"]) | undefined;
+  /** The key of the row this one sits under, in a table whose rows nest: that
+row's `value`, or its place among the rows where it has none. Empty, the
+default, is a row at the top. */
+  "prop:parent"?: (HelixHeadlessTableRow["parent"]) | undefined;
   /** The `rel` of the row's link. You set it yourself, as on an anchor. */
   "prop:rel"?: (HelixHeadlessTableRow["rel"]) | undefined;
   /** Where the row's link opens, such as `_blank`. */
@@ -31865,13 +32129,35 @@ Whatever `<time>` accepts, which is a date, a time, both, a duration or a
 week. Unset, the label is written as it was given and nothing claims to
 know what instant it names. */
   datetime?: (HelixHeadlessTimelineItem["datetime"]) | undefined;
+  /** Marks an event that has not happened yet, such as one that is scheduled.
+The mark is the open circle, and a screen reader hears `pending-label`. */
+  pending?: (HelixHeadlessTimelineItem["pending"]) | undefined;
+  /** What a screen reader hears for an entry that is `pending`. */
+  "pending-label"?: (HelixHeadlessTimelineItem["pendingLabel"]) | undefined;
+  /** What a screen reader hears for an entry that is `pending`. */
+  pendingLabel?: (HelixHeadlessTimelineItem["pendingLabel"]) | undefined;
   /** Writes the time as how long ago it was, or how long until it, from
 `datetime`, where the `time` slot is empty: `long` ("3 hours ago"),
 `short` ("3 hr. ago") or `narrow` ("3h ago"). Set with no value, it is
 `long`. The words move on as they go stale. */
   relative?: (HelixHeadlessTimelineItem["relative"]) | undefined;
-  /** The kind of event. It sets the color of the mark and nothing else. */
+  /** The kind of event. It sets the color of the mark, and a screen reader
+hears it as the word `tone-labels` gives it. */
   tone?: (HelixHeadlessTimelineItem["tone"]) | undefined;
+  /** What a screen reader is told this entry's tone is, such as "Failed".
+Absent is the tone's word in `tone-labels`. */
+  "tone-label"?: (HelixHeadlessTimelineItem["toneLabel"]) | undefined;
+  /** What a screen reader is told this entry's tone is, such as "Failed".
+Absent is the tone's word in `tone-labels`. */
+  toneLabel?: (HelixHeadlessTimelineItem["toneLabel"]) | undefined;
+  /** What a screen reader is told each tone is, by the tone's name, written as
+JSON in the attribute: `tone-labels='{"danger":"Failed"}'`. A tone with no
+word is not read, which is `neutral` and `primary` in English. */
+  "tone-labels"?: (HelixHeadlessTimelineItem["toneLabels"]) | undefined;
+  /** What a screen reader is told each tone is, by the tone's name, written as
+JSON in the attribute: `tone-labels='{"danger":"Failed"}'`. A tone with no
+word is not read, which is `neutral` and `primary` in English. */
+  toneLabels?: (HelixHeadlessTimelineItem["toneLabels"]) | undefined;
 };
 
 export type HelixHeadlessTimelineItemSolidJsProps = {
@@ -31882,13 +32168,35 @@ Whatever `<time>` accepts, which is a date, a time, both, a duration or a
 week. Unset, the label is written as it was given and nothing claims to
 know what instant it names. */
   "prop:datetime"?: (HelixHeadlessTimelineItem["datetime"]) | undefined;
+  /** Marks an event that has not happened yet, such as one that is scheduled.
+The mark is the open circle, and a screen reader hears `pending-label`. */
+  "prop:pending"?: (HelixHeadlessTimelineItem["pending"]) | undefined;
+  /** What a screen reader hears for an entry that is `pending`. */
+  "attr:pending-label"?: (HelixHeadlessTimelineItem["pendingLabel"]) | undefined;
+  /** What a screen reader hears for an entry that is `pending`. */
+  "prop:pendingLabel"?: (HelixHeadlessTimelineItem["pendingLabel"]) | undefined;
   /** Writes the time as how long ago it was, or how long until it, from
 `datetime`, where the `time` slot is empty: `long` ("3 hours ago"),
 `short` ("3 hr. ago") or `narrow` ("3h ago"). Set with no value, it is
 `long`. The words move on as they go stale. */
   "prop:relative"?: (HelixHeadlessTimelineItem["relative"]) | undefined;
-  /** The kind of event. It sets the color of the mark and nothing else. */
+  /** The kind of event. It sets the color of the mark, and a screen reader
+hears it as the word `tone-labels` gives it. */
   "prop:tone"?: (HelixHeadlessTimelineItem["tone"]) | undefined;
+  /** What a screen reader is told this entry's tone is, such as "Failed".
+Absent is the tone's word in `tone-labels`. */
+  "attr:tone-label"?: (HelixHeadlessTimelineItem["toneLabel"]) | undefined;
+  /** What a screen reader is told this entry's tone is, such as "Failed".
+Absent is the tone's word in `tone-labels`. */
+  "prop:toneLabel"?: (HelixHeadlessTimelineItem["toneLabel"]) | undefined;
+  /** What a screen reader is told each tone is, by the tone's name, written as
+JSON in the attribute: `tone-labels='{"danger":"Failed"}'`. A tone with no
+word is not read, which is `neutral` and `primary` in English. */
+  "attr:tone-labels"?: (HelixHeadlessTimelineItem["toneLabels"]) | undefined;
+  /** What a screen reader is told each tone is, by the tone's name, written as
+JSON in the attribute: `tone-labels='{"danger":"Failed"}'`. A tone with no
+word is not read, which is `neutral` and `primary` in English. */
+  "prop:toneLabels"?: (HelixHeadlessTimelineItem["toneLabels"]) | undefined;
 
   /** Set the innerHTML of the element */
   innerHTML?: (string) | undefined;
@@ -34130,6 +34438,13 @@ Written by the playlist rather than by the entry, the way an option's
 selection is: an entry that made itself current would be a second answer to
 which one is playing. */
   current?: (HelixHeadlessVideoPlaylistItem["current"]) | undefined;
+  /** Whether the entry holds the playlist's tab stop. Unset, every entry is in
+the tab order, which is what a server renders.
+
+**Written by the playlist, with no attribute, and it reaches the button.**
+The playlist gives the stop to the entry a reader last focused, or to the
+current one, and the arrow keys reach the rest. */
+  focusable?: (HelixHeadlessVideoPlaylistItem["focusable"]) | undefined;
 
   /** The entry was chosen. Cancelable: cancel it to keep the current entry. */
   "onhelix-select"?: ((
@@ -34158,6 +34473,13 @@ Written by the playlist rather than by the entry, the way an option's
 selection is: an entry that made itself current would be a second answer to
 which one is playing. */
   "prop:current"?: (HelixHeadlessVideoPlaylistItem["current"]) | undefined;
+  /** Whether the entry holds the playlist's tab stop. Unset, every entry is in
+the tab order, which is what a server renders.
+
+**Written by the playlist, with no attribute, and it reaches the button.**
+The playlist gives the stop to the entry a reader last focused, or to the
+current one, and the arrow keys reach the rest. */
+  "prop:focusable"?: (HelixHeadlessVideoPlaylistItem["focusable"]) | undefined;
   /** The entry was chosen. Cancelable: cancel it to keep the current entry. */
   "on:helix-select"?: ((
     e: HelixHeadlessVideoPlaylistItemHelixSelectElementEvent,
@@ -34234,8 +34556,20 @@ export type HelixHeadlessVideoPlaylistHelixEndElementEvent =
   HelixHeadlessVideoPlaylistElementEvent<HelixEndEvent>;
 
 export type HelixHeadlessVideoPlaylistProps = {
+  /** What the playlist says while it has no entries. The `empty` slot replaces it. */
+  "empty-label"?: (HelixHeadlessVideoPlaylist["emptyLabel"]) | undefined;
+  /** What the playlist says while it has no entries. The `empty` slot replaces it. */
+  emptyLabel?: (HelixHeadlessVideoPlaylist["emptyLabel"]) | undefined;
   /** The list's name, read by screen readers. */
   label?: (HelixHeadlessVideoPlaylist["label"]) | undefined;
+  /** Stays on an entry when its clip ends, where the playlist would otherwise
+play the next one. The player's controls, a press, and `next()` still
+move. `repeat="one"` still plays the entry again. */
+  "no-advance"?: (HelixHeadlessVideoPlaylist["noAdvance"]) | undefined;
+  /** Stays on an entry when its clip ends, where the playlist would otherwise
+play the next one. The player's controls, a press, and `next()` still
+move. `repeat="one"` still plays the entry again. */
+  noAdvance?: (HelixHeadlessVideoPlaylist["noAdvance"]) | undefined;
   /** What the live region says when the playlist moves to another entry.
 `{title}` is the entry's name.
 
@@ -34284,7 +34618,7 @@ Ignored once `active` is written. */
   "onhelix-activate"?: ((
     e: HelixHeadlessVideoPlaylistHelixActivateElementEvent,
   ) => void) | undefined;
-  /** The current entry is about to change. Cancelable: cancel it to keep the current entry. */
+  /** The current entry is about to change, and `detail.cause` says why: `press`, `next`, `previous`, `ended`, or `removed`. Cancelable: cancel it to keep the current entry. */
   "onhelix-before-activate"?: ((
     e: HelixHeadlessVideoPlaylistHelixBeforeActivateElementEvent,
   ) => void) | undefined;
@@ -34293,8 +34627,20 @@ Ignored once `active` is written. */
 };
 
 export type HelixHeadlessVideoPlaylistSolidJsProps = {
+  /** What the playlist says while it has no entries. The `empty` slot replaces it. */
+  "attr:empty-label"?: (HelixHeadlessVideoPlaylist["emptyLabel"]) | undefined;
+  /** What the playlist says while it has no entries. The `empty` slot replaces it. */
+  "prop:emptyLabel"?: (HelixHeadlessVideoPlaylist["emptyLabel"]) | undefined;
   /** The list's name, read by screen readers. */
   "prop:label"?: (HelixHeadlessVideoPlaylist["label"]) | undefined;
+  /** Stays on an entry when its clip ends, where the playlist would otherwise
+play the next one. The player's controls, a press, and `next()` still
+move. `repeat="one"` still plays the entry again. */
+  "bool:no-advance"?: (HelixHeadlessVideoPlaylist["noAdvance"]) | undefined;
+  /** Stays on an entry when its clip ends, where the playlist would otherwise
+play the next one. The player's controls, a press, and `next()` still
+move. `repeat="one"` still plays the entry again. */
+  "prop:noAdvance"?: (HelixHeadlessVideoPlaylist["noAdvance"]) | undefined;
   /** What the live region says when the playlist moves to another entry.
 `{title}` is the entry's name.
 
@@ -34342,7 +34688,7 @@ Ignored once `active` is written. */
   "on:helix-activate"?: ((
     e: HelixHeadlessVideoPlaylistHelixActivateElementEvent,
   ) => void) | undefined;
-  /** The current entry is about to change. Cancelable: cancel it to keep the current entry. */
+  /** The current entry is about to change, and `detail.cause` says why: `press`, `next`, `previous`, `ended`, or `removed`. Cancelable: cancel it to keep the current entry. */
   "on:helix-before-activate"?: ((
     e: HelixHeadlessVideoPlaylistHelixBeforeActivateElementEvent,
   ) => void) | undefined;
@@ -35327,6 +35673,12 @@ export type HelixHeadlessVirtualListProps = {
 items out as a grid of that many equal columns, windowed a line at a
 time, with Left and Right moving along a line. */
   columns?: (HelixHeadlessVirtualList["columns"]) | undefined;
+  /** The keys of the items a reader cannot choose or move to, separated by
+commas, as `value` writes keys. Their rows carry `aria-disabled`. */
+  "disabled-keys"?: (HelixHeadlessVirtualList["disabledKeys"]) | undefined;
+  /** The keys of the items a reader cannot choose or move to, separated by
+commas, as `value` writes keys. Their rows carry `aria-disabled`. */
+  disabledKeys?: (HelixHeadlessVirtualList["disabledKeys"]) | undefined;
   /** The text of the row shown when there are no items and none are loading,
 where the `empty` slot is empty. Empty, the default, shows no row. */
   "empty-label"?: (HelixHeadlessVirtualList["emptyLabel"]) | undefined;
@@ -35341,6 +35693,11 @@ right whenever the rows really are one height and is the cheaper of the two. */
   /** The id of the script element that holds the items as JSON. `items` wins
 where both are set. */
   for?: (HelixHeadlessVirtualList["for"]) | undefined;
+  /** The space between two rows, and between two columns in a grid, in
+pixels. The list counts it in each row's place, so a gap does not walk
+the rows away from the scroll position the way a margin on each row
+would. */
+  gap?: (HelixHeadlessVirtualList["gap"]) | undefined;
   /** The field of each item that is its key in `value`, as a key or a path of
 keys. Empty reads a string or a number item as its own key, and any
 other item by its place in the set. */
@@ -35376,6 +35733,22 @@ disagree with itself; measuring is what a set of genuinely different
 heights needs and costs a read of each row as it renders. A list of
 one-line rows should leave this alone. */
   measured?: (HelixHeadlessVirtualList["measured"]) | undefined;
+  /** The narrowest a column of a grid may be, in pixels. Set, the list lays
+out as many columns as fit the box at that width, at least one, and
+follows the box as it resizes, which `columns` then does not decide. */
+  "min-column-width"?: (HelixHeadlessVirtualList["minColumnWidth"] | `${number}`) | undefined;
+  /** The narrowest a column of a grid may be, in pixels. Set, the list lays
+out as many columns as fit the box at that width, at least one, and
+follows the box as it resizes, which `columns` then does not decide. */
+  minColumnWidth?: (HelixHeadlessVirtualList["minColumnWidth"]) | undefined;
+  /** What a press does to the items already chosen: `toggle` adds or takes out
+the item, and `replace` selects it alone and lets the arrow keys carry the
+selection, with Control or Command adding or taking out one item. */
+  "selection-behavior"?: (HelixHeadlessVirtualList["selectionBehavior"]) | undefined;
+  /** What a press does to the items already chosen: `toggle` adds or takes out
+the item, and `replace` selects it alone and lets the arrow keys carry the
+selection, with Control or Command adding or taking out one item. */
+  selectionBehavior?: (HelixHeadlessVirtualList["selectionBehavior"]) | undefined;
   /** Makes the list a list box a reader chooses from: `single` selects one
 item, and `multiple` any number. Unset is a list a reader reads. */
   "selection-mode"?: (HelixHeadlessVirtualList["selectionMode"]) | undefined;
@@ -35432,6 +35805,12 @@ export type HelixHeadlessVirtualListSolidJsProps = {
 items out as a grid of that many equal columns, windowed a line at a
 time, with Left and Right moving along a line. */
   "prop:columns"?: (HelixHeadlessVirtualList["columns"]) | undefined;
+  /** The keys of the items a reader cannot choose or move to, separated by
+commas, as `value` writes keys. Their rows carry `aria-disabled`. */
+  "attr:disabled-keys"?: (HelixHeadlessVirtualList["disabledKeys"]) | undefined;
+  /** The keys of the items a reader cannot choose or move to, separated by
+commas, as `value` writes keys. Their rows carry `aria-disabled`. */
+  "prop:disabledKeys"?: (HelixHeadlessVirtualList["disabledKeys"]) | undefined;
   /** The text of the row shown when there are no items and none are loading,
 where the `empty` slot is empty. Empty, the default, shows no row. */
   "attr:empty-label"?: (HelixHeadlessVirtualList["emptyLabel"]) | undefined;
@@ -35446,6 +35825,11 @@ right whenever the rows really are one height and is the cheaper of the two. */
   /** The id of the script element that holds the items as JSON. `items` wins
 where both are set. */
   "prop:for"?: (HelixHeadlessVirtualList["for"]) | undefined;
+  /** The space between two rows, and between two columns in a grid, in
+pixels. The list counts it in each row's place, so a gap does not walk
+the rows away from the scroll position the way a margin on each row
+would. */
+  "prop:gap"?: (HelixHeadlessVirtualList["gap"]) | undefined;
   /** The field of each item that is its key in `value`, as a key or a path of
 keys. Empty reads a string or a number item as its own key, and any
 other item by its place in the set. */
@@ -35481,6 +35865,22 @@ disagree with itself; measuring is what a set of genuinely different
 heights needs and costs a read of each row as it renders. A list of
 one-line rows should leave this alone. */
   "prop:measured"?: (HelixHeadlessVirtualList["measured"]) | undefined;
+  /** The narrowest a column of a grid may be, in pixels. Set, the list lays
+out as many columns as fit the box at that width, at least one, and
+follows the box as it resizes, which `columns` then does not decide. */
+  "attr:min-column-width"?: (HelixHeadlessVirtualList["minColumnWidth"] | `${number}`) | undefined;
+  /** The narrowest a column of a grid may be, in pixels. Set, the list lays
+out as many columns as fit the box at that width, at least one, and
+follows the box as it resizes, which `columns` then does not decide. */
+  "prop:minColumnWidth"?: (HelixHeadlessVirtualList["minColumnWidth"]) | undefined;
+  /** What a press does to the items already chosen: `toggle` adds or takes out
+the item, and `replace` selects it alone and lets the arrow keys carry the
+selection, with Control or Command adding or taking out one item. */
+  "attr:selection-behavior"?: (HelixHeadlessVirtualList["selectionBehavior"]) | undefined;
+  /** What a press does to the items already chosen: `toggle` adds or takes out
+the item, and `replace` selects it alone and lets the arrow keys carry the
+selection, with Control or Command adding or taking out one item. */
+  "prop:selectionBehavior"?: (HelixHeadlessVirtualList["selectionBehavior"]) | undefined;
   /** Makes the list a list box a reader chooses from: `single` selects one
 item, and `multiple` any number. Unset is a list a reader reads. */
   "attr:selection-mode"?: (HelixHeadlessVirtualList["selectionMode"]) | undefined;
@@ -38317,6 +38717,16 @@ export type CustomElements = {
    * - What a key changes that a reader cannot see is said: where a card moved
    *   to, its new size, how many cards are selected, and the zoom. A selected
    *   card or connection says so when a reader arrives on it.
+   * - Control or Command with C copies the selected cards, and the connections
+   *   between them, as a JSON Canvas document in text, which another board or
+   *   an app that reads the format takes. A paste is your page's: listen for
+   *   `paste` on the board, read the text with `fromJsonCanvas`, and add the
+   *   cards it holds.
+   * - Control or Command with Z undoes the last move or resize the board made,
+   *   and with Shift, or Control with Y, makes it again. `undo()` and `redo()`
+   *   do the same from a script. Each asks with `helix-before-move` and tells
+   *   with `helix-move`, as a move does, so a board that holds its positions in
+   *   your state is undone through your state.
    *
    * Every drag also works with clicks, as WCAG 2.5.7 requires for a pointer that
    * cannot hold a button down. Click a selected card's move handle, a corner, a
@@ -38367,6 +38777,7 @@ export type CustomElements = {
    * this, so a reader hears the ends first and what the line says after.
    * - `controls-label`/`controlsLabel`: The name of the group of controls, read by screen readers, which names
    * what the controls drive rather than the mechanism.
+   * - `copied-label`/`copiedLabel`: What screen readers hear after a copy, with `{count}` for the cards copied.
    * - `fallback-label`/`fallbackLabel`: The board's name where `label` is empty.
    * - `label`: The accessible name for the board. Required.
    *
@@ -38412,6 +38823,7 @@ export type CustomElements = {
    * walk the cards.
    * - `reconnecting-label`/`reconnectingLabel`: The text announced when a connection's end is picked up, with `{from}` and
    * `{to}`.
+   * - `redone-label`/`redoneLabel`: What screen readers hear after a move or a resize is made again.
    * - `resized-label`/`resizedLabel`: What screen readers hear after a key resizes a card, with `{name}` for the
    * card and `{width}` and `{height}` for its new size, in the document's
    * units.
@@ -38469,6 +38881,7 @@ export type CustomElements = {
    * see the board is told by the color; this is how a reader who cannot is
    * told the same. A tone left out is not read.
    * - `two-finger-hint-label`/`twoFingerHintLabel`: The hint shown when one finger swipes over the board with `gestures="cooperative"`.
+   * - `undone-label`/`undoneLabel`: What screen readers hear after a move or a resize is undone.
    * - `using-label`/`usingLabel`: The line shown while the board, with `gestures="activate"`, has the gestures.
    * - `wheel-hint-label`/`wheelHintLabel`: The hint shown when the wheel scrolls past the board with
    * `gestures="cooperative"`. `{key}` is ⌘ on a Mac and Ctrl elsewhere.
@@ -38641,6 +39054,11 @@ export type CustomElements = {
    *
    * What a reader landing on a card off the edge of the view gets, and what a
    * page's own search or outline can call to take a reader to one.
+   * - `undo() => boolean`: Puts the cards of the last move or resize back where they stood, asking
+   * with `helix-before-move` first. Returns whether anything moved: false
+   * with nothing to undo, or when the request was refused.
+   * - `redo() => boolean`: Makes the last move or resize `undo` took back again, asking with
+   * `helix-before-move` first. Returns whether anything moved.
    * - `toJsonCanvas() => CanvasDocument`: The board as a JSON Canvas document, for saving it.
    *
    * What each card holds is the consumer's DOM, so a card comes back as a card
@@ -39471,6 +39889,19 @@ export type CustomElements = {
    * "Ada is typing" (`typing-label`), which a screen reader hears, and clearing
    * it takes them away. Anything slotted into `status` is drawn first.
    *
+   * **Keyboard.** The transcript moves between turns the way a feed does. Each
+   * turn says its place, such as "3 of 40", windowed or not.
+   *
+   * | Key | What it does |
+   * |---|---|
+   * | Page Down, Page Up | On a turn or inside one, moves focus to the next or the previous turn. On the transcript itself, moves focus to the turn at the top of the view. |
+   * | Control with End | Moves focus to the composer. |
+   * | Control with Home | Moves focus to the first control above the transcript, or to the transcript. |
+   *
+   * While you are scrolled away from the newest turn, the `resume` region shows
+   * a button that takes you back, named by `resume-label`, "Jump to latest".
+   * Slot your own control into `resume` to replace it.
+   *
    * A screen reader names each turn by its author and its time, such as "You, 2
    * minutes ago". Set `me-label` and `message-label` to say it in your language,
    * and give each turn by `them` an `author-label`. A turn with neither an author
@@ -39541,6 +39972,7 @@ export type CustomElements = {
    * is the way back, and that is a part inside the shadow tree where a
    * stylesheet can already reach it. Measured rather than assumed: `label,
    * pinned` after upgrade against `label` from the server.
+   * - `resume-label`/`resumeLabel`: The words on the button that returns to the newest turn, where `resume` is empty.
    * - `threshold`: How near the bottom still counts as being at it, in pixels.
    *
    * A hook rather than a constant, because the right number depends on how tall
@@ -39610,7 +40042,7 @@ export type CustomElements = {
    * - `actions`: Controls for the whole conversation, beside the header.
    * - `composer`: The composer, below the transcript.
    * - `header`: Content above the transcript that names the conversation.
-   * - `resume`: The control that returns to the bottom, shown while the user has scrolled away.
+   * - `resume`: The control that returns to the bottom, shown while the user has scrolled away. Defaults to a button named by `resume-label`.
    * - `status`: Status beside the composer, such as someone typing or a lost connection.
    *
    * ## Methods
@@ -39659,6 +40091,8 @@ export type CustomElements = {
    * - `message-state`: The state text of a turn from `turns`, when there is one to show.
    * - `message-time`: The time of a turn from `turns`.
    * - `resume`: The control shown while the user is scrolled away from the bottom.
+   * - `resume-button`: The button the `resume` region shows when nothing is slotted into it.
+   * - `resume-mark`: The arrow on the default `resume-button`.
    * - `status`: The status region, outside the log.
    * - `turn`: The wrapper around the message drawn for one turn from `turns`.
    * - `typing`: The words that say who is typing, in the status band, while `typing` names someone.
@@ -40168,7 +40602,18 @@ export type CustomElements = {
    * For a fragment of code inside a sentence, use `Code`.
    *
    * Set `line-numbers` to number the lines in a gutter beside the code, hidden
-   * from the accessibility tree and left out of a copy. Set `highlight` to a
+   * from the accessibility tree and left out of a copy. Set `mark-lines` to
+   * mark lines a reader should look at, such as `2, 4-6`: the block draws a
+   * band behind each run, placed where the lines are laid out, so it follows a
+   * highlighter's markup and lines that wrap. Set `wrap` to wrap long lines
+   * rather than scroll them; a gutter then numbers each line where it starts.
+   * Set `wrappable` for a button in the header that turns `wrap` on and off,
+   * pressed while the lines wrap.
+   *
+   * The header holds the name, the `actions` slot, and the copy button. Slot a
+   * control into `actions`, such as a button that sets `wrap` or one that opens
+   * the code in an editor, and the block draws a header for it even with no
+   * name. `copy-icon` and `copied-icon` replace the copy button's two icons. Set `highlight` to a
    * function that turns the code into highlighted markup, such as one wrapping
    * Shiki or Prism, and the block draws what it returns; it is handed the
    * block's `language`, so one function serves every block. The code stays in
@@ -40255,6 +40700,9 @@ export type CustomElements = {
    * copy, which takes the code alone. Reflected, because the stylesheet lays
    * the gutter out beside the code. A diff numbers its lines from its hunks
    * whether or not this is set.
+   * - `mark-lines`/`markLines`: The lines to mark, as numbers and ranges counted from 1, such as `2, 4-6`.
+   * Each run is drawn as a band behind its lines. Not for a diff, which marks
+   * its own changes.
    * - `no-copy`/`noCopy`: Whether to leave the copy button off.
    *
    * Negative, which is not a style choice. A boolean attribute is true whenever
@@ -40279,6 +40727,17 @@ export type CustomElements = {
    * Absent is unified, each removal above its replacement, which fits any
    * width. `split` sets the old version beside the new one. Optional rather
    * than defaulted, so the host carries no attribute the consumer did not write.
+   * - `wrap`: Whether long lines wrap. Without it they scroll.
+   *
+   * Off by default, so long lines scroll, because a line break can be
+   * significant in code and a wrapped line reads as two. For prose-like code,
+   * such as a long command or a log line, a wrap reads better than a scroll.
+   * With `line-numbers`, each number stands beside the line it numbers
+   * however many rows that line takes. Reflected, because the stylesheet
+   * wraps the lines.
+   * - `wrap-label`/`wrapLabel`: The wrap button's name, which it keeps whether it is pressed or not.
+   * - `wrappable`: Whether the header has a button that wraps the lines and unwraps them. The
+   * block draws a header for it even with no name.
    * - `highlight`: Turns the code into highlighted markup, which the block draws in place of
    * the plain text.
    *
@@ -40321,16 +40780,36 @@ export type CustomElements = {
    * browser harness's awaits it alone: a browser always runs the frame, and a
    * timer beside it was a bet on how long one takes, which a busy run lost. (property only) (readonly)
    *
+   * ## Events
+   *
+   * Events that will be emitted by the component.
+   *
+   * - `helix-before-toggle`: The wrap button was pressed, with the `wrap` it asks for in `detail.checked`. Cancelable: cancel it to keep the lines as they are.
+   * - `helix-toggle`: Fired after the wrap button changed `wrap`, with the new value in `detail.checked`.
+   *
    * ## Slots
    *
    * Areas where markup can be added to the component.
    *
    * - `(default)`: The code.
+   * - `actions`: Controls for the block, in the header before the copy button.
+   * - `copied-icon`: The copy button's icon after a copy. Defaults to a check mark.
+   * - `copy-icon`: The copy button's icon before a copy. Defaults to a clipboard.
+   *
+   * ## CSS Custom Properties
+   *
+   * CSS variables available for styling the component.
+   *
+   * - `--code-block-line-size`: Written by the block on each `number` in a `wrap` block with `line-numbers`: how tall the line it numbers is laid out. Do not set it.
+   * - `--code-block-mark-inline-size`: Written by the block on each `mark`: how wide the code is, scrolled part included. Do not set it.
+   * - `--code-block-mark-size`: Written by the block on each `mark`: how tall its run of lines is. Do not set it.
+   * - `--code-block-mark-start`: Written by the block on each `mark`: how far down the code its run of lines starts. Do not set it.
    *
    * ## CSS Parts
    *
    * Custom selectors for styling elements within the component.
    *
+   * - `actions`: The box in the header that holds the `actions` slot, drawn while something is slotted there.
    * - `added`: In a diff, a line only the new version has, an `<ins>`.
    * - `block`: The scrolling `<pre>`.
    * - `code`: The `<code>` inside it.
@@ -40359,13 +40838,15 @@ export type CustomElements = {
    * - `header`: The bar that holds the name and the copy button, shown when there is a name.
    * - `hunk`: In a diff, a `@@` line saying where the lines under it are.
    * - `label`: The block's name: its `label`, or its `language` where it has no label.
+   * - `mark`: The band behind a run of lines `mark-lines` names. The block writes where the run is laid out into `--code-block-mark-start`, `--code-block-mark-size`, and `--code-block-mark-inline-size` on it. Hidden from the accessibility tree.
    * - `marker`: In a diff, the `+`, `-`, or space that starts a line.
    * - `new`: In a split diff, the new version's `<pre>`.
-   * - `number`: In a diff, a line number.
+   * - `number`: In a diff, a line number. In a `wrap` block with `line-numbers`, one line's number in the gutter, which the block makes as tall as the line it numbers through `--code-block-line-size`.
    * - `old`: In a split diff, the old version's `<pre>`.
    * - `removed`: In a diff, a line only the old version has, a `<del>`.
    * - `split`: In a split diff, the two versions side by side.
    * - `text`: In a diff, a line's code.
+   * - `wrap-toggle`: The button in the header that wraps the lines and unwraps them, drawn when `wrappable` is set.
    *
    * ## CSS States
    *
@@ -46495,14 +46976,15 @@ export type CustomElements = {
    * - `pan(to: ViewportWay) => void`: Pans the view one step in a direction.
    * - `zoom(by: number) => void`: Zooms the view one step: `1` zooms in and `-1` zooms out.
    * - `toggleFullscreen() => void`: Turns fullscreen on or off.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
@@ -48338,14 +48820,15 @@ export type CustomElements = {
    * - `previous() => void`: Shows the previous item. Before the first item, it shows the last when
    * `loop` is set.
    * - `toggleFullscreen() => void`: Makes the viewer fill the screen, or exits fullscreen.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    * - `requestOpen(next: boolean) => boolean`: Requests that the element open or close, and returns whether the change
    * was applied.
    *
@@ -57310,6 +57793,13 @@ export type CustomElements = {
    * only whoever put it there knows that, which is the same reason `min` is a
    * consumer's to set.
    * - `corner-label`/`cornerLabel`: The name of the handle where two dividers cross, read by screen readers.
+   * - `corner-value-label`/`cornerValueLabel`: What the handle where two dividers cross says it is set to, both dividers
+   * at once: `{across}` is where the divider that runs down stands, and
+   * `{down}` where the one that runs across stands, each a percentage.
+   *
+   * **Both, because the handle moves both**, and a number names one: the
+   * handle's `aria-valuenow` is the divider its `aria-orientation` names, and
+   * these words are the whole of where it is.
    * - `default-collapsed`/`defaultCollapsed`: Which pane starts shut, when `collapsed` is not set.
    * - `default-position`/`defaultPosition`: Where the divider starts, when `position` is not set.
    * - `label`: The divider's name, read by screen readers.
@@ -57796,14 +58286,15 @@ export type CustomElements = {
    * and the invalid mark from every stage, as Ark UI's `resetStep` does.
    * Returns whether it moved: a listener can refuse the move with
    * `helix-before-activate`, and the stages then keep their marks.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Custom Properties
    *
@@ -58534,6 +59025,27 @@ export type CustomElements = {
    * Tab reaches each checkbox, and Space ticks it. To act on one row, put a
    * link or a button in a cell, or give the row an `href`.
    *
+   * `selection-mode="single"` selects one row at a time: ticking a row lets go
+   * of the one before, the heading holds no checkbox, and Shift and Control with
+   * A take in nothing more. `selection-behavior="replace"` makes a press on a
+   * row, anywhere but its own controls, select it alone, as a file list does,
+   * and in a `grid` table the arrow keys carry the selection with them. Control
+   * or Command with a press adds or takes out the row, and with an arrow moves
+   * without selecting. Shift with a press takes in the rows from the one last
+   * chosen.
+   *
+   * **Nesting rows.** A row with `parent` sits under the row of that key, as
+   * a file sits in a folder. The table then draws a column of disclosure
+   * buttons, under a heading named by `expand-column-label`: a row with rows
+   * under it has a button named by `expand-row-label` ("Expand {row}") that
+   * says with `aria-expanded` whether it is open, and the rows under a shut row
+   * are not drawn. `expanded` holds the open rows' keys, comma separated, and
+   * `default-expanded` is where it starts. A press asks with
+   * `helix-before-toggle` and tells with `helix-toggle`, both from the row, so
+   * you can refuse it or load the rows on the way. A sort orders the rows
+   * under each row among themselves, and in a `grid` table the table is a
+   * `treegrid` whose rows say their depth.
+   *
    * **Moving rows.** `reorderable` adds a column of grips before the checkboxes,
    * under a heading named by `row-grips-label`.
    *
@@ -58570,13 +59082,20 @@ export type CustomElements = {
    * | Enter on a cell of a row with `href` | Follows the row's link. |
    * | Enter, Space on a sortable heading | Sorts by the column. |
    * | Space on a row, Enter or Space on its checkbox cell | Selects the row, in a `selectable` table. |
+   * | Enter or Space on a disclosure cell | Shows or hides the rows under the row, in a table whose rows nest. |
    * | Enter or Space on a grip cell | Picks the row up, or drops it, in a `reorderable` table. Up, Down, Home, and End move a row picked up, and Escape puts it back. |
+   * | Down, Up, Page Down, Page Up under `selection-behavior="replace"` | Selects the row it moves to alone. Control or Command with the key moves without selecting. |
    * | Shift with Down or Up | Selects the rows it moves across, in a `selectable` table. |
    * | Shift with Space | Selects every row from the one last chosen, in a `selectable` table. |
    * | Control or Command with A | Selects every row, in a `selectable` table. |
    * | A letter or a word | Moves to the next row whose first cell starts with what you typed. |
    * | Tab | Leaves the table. |
    *
+   * **Loading more.** `load-more` sends `helix-load-more` once the end of the
+   * table comes within a screen of view, in the box that scrolls it or the
+   * page, once for each number of rows: add rows and it can send it again. Set
+   * `loading` while you fetch, and the table asks for nothing until it clears.
+   *
    * When the rows did not load, set `error-text`, such as "The orders did not
    * load", and put a button that tries again in the `error` slot. The line shows
    * after the rows in place of the empty and loading lines, the live region says
@@ -58622,6 +59141,8 @@ export type CustomElements = {
    * and a list here would be a second way to say what that says. This table's
    * cells are markup, and a table written as rows of cells with no column
    * declared in it has nowhere else to be sized from.
+   * - `default-expanded`/`defaultExpanded`: The keys of the rows whose rows are shown at the start, separated by
+   * commas. Used until `expanded` is set.
    * - `default-selected`/`defaultSelected`: The keys selected at the start, separated by commas. Used until `selected`
    * is set.
    * - `default-sort`/`defaultSort`: The starting sort order, used until `sort` is set.
@@ -58634,6 +59155,11 @@ export type CustomElements = {
    * While it is set, a line after the rows shows it, or your own content in the
    * `error` slot, in place of the empty and loading lines, and the live region
    * says it.
+   * - `expand-column-label`/`expandColumnLabel`: The name of the heading over the disclosure buttons.
+   * - `expanded`: The keys of the rows whose rows are shown, separated by commas, in a table
+   * whose rows nest. A press on a row's disclosure button asks first, and
+   * `default-expanded` seeds what this element then owns.
+   * - `expand-row-label`/`expandRowLabel`: The name of a row's disclosure button. `{row}` is the words of the row's first cell.
    * - `fallback-label`/`fallbackLabel`: The table's name where neither `label` nor an `aria-label` or
    * `aria-labelledby` on the host gives it one.
    * - `grid`: Makes the table a grid: one tab stop, and the arrow keys, Home, End and the
@@ -58647,6 +59173,8 @@ export type CustomElements = {
    *
    * An `aria-label` or `aria-labelledby` on the host names the table too, and
    * wins over this.
+   * - `load-more`/`loadMore`: Sends `helix-load-more` once the end of the table comes within a screen
+   * of view, so you can add the next rows as a reader nears them.
    * - `moved-label`/`movedLabel`: What screen readers hear each time a key moves a held row, in a
    * `reorderable` table. `{name}` is the row's words, `{position}` the place it
    * would go, counting from 1, and `{count}` the number of rows.
@@ -58660,6 +59188,8 @@ export type CustomElements = {
    * - `selectable`: Adds a column of checkboxes for selecting rows. Each row is known by its
    * `value`, and by its place among the rows as written where it has none.
    * - `select-all-label`/`selectAllLabel`: The name of the checkbox in the heading that selects every row.
+   * - `select-column-label`/`selectColumnLabel`: The name of the heading over the checkboxes under
+   * `selection-mode="single"`, where it holds no checkbox of its own.
    * - `selected`: The keys of the selected rows, separated by commas.
    *
    * A reader's press fires `helix-select` first, and refusing it leaves the
@@ -58669,6 +59199,11 @@ export type CustomElements = {
    * rows are chosen, written in the locale, and a language that needs plural
    * forms writes them: `{count, plural, one {# wybrany} few {# wybrane} many
    * {# wybranych} other {# wybranego}}`.
+   * - `selection-behavior`/`selectionBehavior`: What a press on a row, or in a `grid` table a key that moves to one, does
+   * to the rows already selected: `toggle`, the default, leaves them to the
+   * checkboxes, and `replace` selects the row alone.
+   * - `selection-mode`/`selectionMode`: How many rows a `selectable` table selects: `multiple`, the default, or
+   * `single`, one at a time.
    * - `select-row-label`/`selectRowLabel`: The name of a row's checkbox. `{row}` is replaced with the words of the
    * row's first cell.
    * - `sort`: The sort order, as `field:direction`, where `field` is a sortable column's
@@ -58717,11 +59252,14 @@ export type CustomElements = {
    * Events that will be emitted by the component.
    *
    * - `helix-before-reorder`: Fired when a row is dropped at a new place, in a `reorderable` table, with every row's key in the new order. Cancelable: cancel it to keep the row where it is.
+   * - `helix-before-toggle`: Fired from a row when its disclosure button is pressed, with whether it would be open in `detail.checked`. Cancelable: cancel it to keep the row as it is.
+   * - `helix-load-more`: Fired, in a table with `load-more`, when the end of the table comes within a screen of view, once for each number of rows.
    * - `helix-reorder`: Fired after `helix-before-reorder` when nobody canceled it. Move your rows to the order in `keys`. Cancelable: cancel it to say the move did not happen.
    * - `helix-select`: The selection is about to change. The event carries every selected key, separated by commas. Cancelable: cancel it to keep the current selection.
    * - `helix-selected`: Fired after the selection changes, with every selected key, separated by commas.
    * - `helix-sort`: A different sort order was requested, as `field:direction`, or empty for the order the rows were written in. Cancelable: cancel it to keep the current order.
    * - `helix-sorted`: Fired after the sort order changes, with the new order.
+   * - `helix-toggle`: Fired from a row once the rows under it are shown or hidden, with whether it is open in `detail.checked`.
    *
    * ## Slots
    *
@@ -58765,6 +59303,7 @@ export type CustomElements = {
    * - `drag-preview`: A copy of the row a pointer drags by its grip, which follows the pointer in the top layer until the row is let go, in a `reorderable` table. Hidden from assistive technology.
    * - `empty`: The text shown when there are no rows.
    * - `error`: The line shown after the rows while `error-text` is set, in place of the empty and loading text.
+   * - `expand-head`: The heading over the disclosure buttons, in a table whose rows nest.
    * - `grid-end`: An empty box after the rows, in a `grid` table. Tab focuses it on its way out of the table, so the key leaves from the end.
    * - `grid-start`: An empty box before the rows, in a `grid` table. Shift with Tab focuses it on its way out of the table.
    * - `grip-head`: The heading over the row grips, in a `reorderable` table.
@@ -58802,6 +59341,12 @@ export type CustomElements = {
    * the drop indicator is, with the `dragging`, `drop-before`, and `drop-after`
    * states.
    *
+   * **`parent` nests the row under another**, by that row's key. The table
+   * then draws a column of disclosure buttons: a row with rows under it has one,
+   * named by the table's `expand-row-label` and saying whether it is open with
+   * `aria-expanded`, and its rows are drawn only while it is open. The cell is
+   * indented by the row's depth through `--table-row-level`.
+   *
    * **`href` makes the whole row a link**, as a row action does in React Aria's
    * table: a press anywhere on the row follows it, except on a link or a control
    * of the row's own, and Control, Command or Shift open it the way they open a
@@ -58822,6 +59367,9 @@ export type CustomElements = {
    * reached.
    * - `href`: The URL a press on the row follows, which makes the whole row a link.
    * Empty, the default, leaves presses to the row's cells.
+   * - `parent`: The key of the row this one sits under, in a table whose rows nest: that
+   * row's `value`, or its place among the rows where it has none. Empty, the
+   * default, is a row at the top.
    * - `rel`: The `rel` of the row's link. You set it yourself, as on an anchor.
    * - `target`: Where the row's link opens, such as `_blank`.
    * - `value`: The key the table's `selected` lists this row by. Left empty, the row is
@@ -58853,6 +59401,12 @@ export type CustomElements = {
    *
    * - `(default)`: The row's cells.
    *
+   * ## CSS Custom Properties
+   *
+   * CSS variables available for styling the component.
+   *
+   * - `--table-row-level`: Written by the row on its `expand` cell: how deep the row sits, from 1. Do not set it.
+   *
    * ## CSS Parts
    *
    * Custom selectors for styling elements within the component.
@@ -58868,6 +59422,9 @@ export type CustomElements = {
    * - `checkbox-mark-checked`: Added to `checkbox-mark` while its box is checked.
    * - `checkbox-mark-dash`: Added to `checkbox-mark` while it draws the dash, which it keeps until its box is checked.
    * - `checkbox-mark-indeterminate`: Added to `checkbox-mark` while only some rows are selected.
+   * - `expand`: The cell that holds the row's disclosure button, in a table whose rows nest. It carries `--table-row-level`, the row's depth from 1.
+   * - `expand-button`: The button that shows and hides the rows under this one.
+   * - `expand-mark`: The caret on the disclosure button, which points along the line, turned down by the styled tier while the row is open.
    * - `grip`: The cell that holds the row's grip, in a `reorderable` table.
    * - `grip-button`: The button that moves the row.
    * - `grip-mark`: The icon on the grip.
@@ -58881,6 +59438,7 @@ export type CustomElements = {
    * - `dragging`: The row is being moved, in a `reorderable` table.
    * - `drop-after`: The row being moved goes after this one when it is dropped.
    * - `drop-before`: The row being moved goes before this one when it is dropped.
+   * - `expanded`: While the rows under this one are shown.
    * - `link`: While the row has `href` and is not `disabled`, so a press on it follows the link.
    * - `selected`: While the row is selected, in a `selectable` table.
    * - `settled`: Set one frame after the first render. Transitions wait for it, so an element does not animate its own arrival.
@@ -59133,14 +59691,15 @@ export type CustomElements = {
    *
    * Methods that can be called to access component functionality.
    *
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
@@ -60763,7 +61322,14 @@ export type CustomElements = {
    * counting parent, and no script. `Steps` and `Breadcrumbs` work the same way.
    *
    * `tone` sets the kind of event and is the only thing that colors the mark. It
-   * uses the same values as `Announcement`.
+   * uses the same values as `Announcement`. **A screen reader hears the tone as
+   * a word**, from `tone-labels`: the mark is an image named "Error",
+   * "Information", "Success" or "Warning", so the color is not the only place
+   * the meaning is. `neutral` and `primary` say nothing unless you name them.
+   *
+   * **`pending` marks an event that has not happened yet**, such as one that is
+   * scheduled. The mark is the open circle, and a screen reader hears
+   * `pending-label`, "Scheduled", with the tone's word.
    *
    * ## Attributes & Properties
    *
@@ -60775,11 +61341,20 @@ export type CustomElements = {
    * Whatever `<time>` accepts, which is a date, a time, both, a duration or a
    * week. Unset, the label is written as it was given and nothing claims to
    * know what instant it names.
+   * - `pending`: Marks an event that has not happened yet, such as one that is scheduled.
+   * The mark is the open circle, and a screen reader hears `pending-label`.
+   * - `pending-label`/`pendingLabel`: What a screen reader hears for an entry that is `pending`.
    * - `relative`: Writes the time as how long ago it was, or how long until it, from
    * `datetime`, where the `time` slot is empty: `long` ("3 hours ago"),
    * `short` ("3 hr. ago") or `narrow` ("3h ago"). Set with no value, it is
    * `long`. The words move on as they go stale.
-   * - `tone`: The kind of event. It sets the color of the mark and nothing else.
+   * - `tone`: The kind of event. It sets the color of the mark, and a screen reader
+   * hears it as the word `tone-labels` gives it.
+   * - `tone-label`/`toneLabel`: What a screen reader is told this entry's tone is, such as "Failed".
+   * Absent is the tone's word in `tone-labels`.
+   * - `tone-labels`/`toneLabels`: What a screen reader is told each tone is, by the tone's name, written as
+   * JSON in the attribute: `tone-labels='{"danger":"Failed"}'`. A tone with no
+   * word is not read, which is `neutral` and `primary` in English.
    * - `whenSettled`: Resolves a frame after the first update, when transitions are switched on.
    *
    * **Named `whenSettled` because `settled` is taken four times over**, by
@@ -60806,7 +61381,7 @@ export type CustomElements = {
    * Areas where markup can be added to the component.
    *
    * - `(default)`: What happened.
-   * - `marker`: The mark on the line. Defaults to a dot, which is the slot's fallback content.
+   * - `marker`: The mark on the line. Defaults to a dot, which is the slot's fallback content. A mark you slot is read as the tone's word, where the entry has one.
    * - `time`: When it happened, written the way you want it shown.
    *
    * ## CSS Parts
@@ -60815,7 +61390,7 @@ export type CustomElements = {
    *
    * - `content`: What happened, and the time above it.
    * - `dot`: The dot drawn when no marker is slotted.
-   * - `marker`: The mark on the line.
+   * - `marker`: The mark on the line. An image named by the tone's word, and by `pending-label`, where either applies.
    * - `rail`: The column that holds the mark and the line. Draw the two halves of the line with `::part(rail)::before` and `::part(rail)::after` in your stylesheet. This tier ships no CSS and renders no extra box for the line.
    * - `time`: When it happened.
    *
@@ -62750,14 +63325,15 @@ export type CustomElements = {
    *
    * Methods that can be called to access component functionality.
    *
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
@@ -62951,6 +63527,12 @@ export type CustomElements = {
    * Written by the playlist rather than by the entry, the way an option's
    * selection is: an entry that made itself current would be a second answer to
    * which one is playing. (property only)
+   * - `focusable`: Whether the entry holds the playlist's tab stop. Unset, every entry is in
+   * the tab order, which is what a server renders.
+   *
+   * **Written by the playlist, with no attribute, and it reaches the button.**
+   * The playlist gives the stop to the entry a reader last focused, or to the
+   * current one, and the arrow keys reach the rest. (property only)
    * - `text`: The entry's name: its own text, without the content in its named slots.
    *
    * `textContent` takes the whole subtree: a row with a duration in `meta`
@@ -62992,6 +63574,7 @@ export type CustomElements = {
    * Areas where markup can be added to the component.
    *
    * - `(default)`: The entry's name.
+   * - `indicator`: A mark shown on the entry that is playing, such as an equalizer icon. Rendered only while the entry is current.
    * - `media`: A thumbnail. Defaults to an image of `poster`.
    * - `meta`: Content after the name, such as a duration or a date.
    *
@@ -63007,6 +63590,7 @@ export type CustomElements = {
    * Custom selectors for styling elements within the component.
    *
    * - `container`: The list item that holds the button.
+   * - `indicator`: The `indicator` slot, at the end of the row, rendered only while the entry is playing. It draws no box until you give it one.
    * - `item`: The row, which is a button.
    * - `item-current`: Added to `item` for the entry that is playing.
    * - `label`: The name and the content after it.
@@ -63134,19 +63718,31 @@ export type CustomElements = {
    * - the player reaches the end.
    *
    * On `ended` the playlist advances and the next clip starts playing, because
-   * the user already pressed play once. `repeat` decides what happens at the
+   * the user already pressed play once. `no-advance` turns that off, and the
+   * playlist stays on the entry that ended. `repeat` decides what happens at the
    * end: `one` plays the same entry again, and `all` goes from the last entry
    * back to the first. Without it, the playlist stops on the last entry and
    * sends `helix-end`. `shuffle` plays the entries in a random order, starting
    * from the one that is current, and `previous` retraces that order.
    *
+   * **`helix-before-activate` says why the playlist is moving**, in
+   * `detail.cause`: `press` for an entry or a menu choice, `next` and
+   * `previous` for the player's controls and the methods, `ended` at the end of
+   * a clip, and `removed` when the current entry leaves the playlist. Cancel an
+   * `ended` move to show your own "Up next" countdown, then call `next()`.
+   *
+   * **Removing the current entry moves the playlist on**, to the entry after it,
+   * or to the one before it when it was the last. A clip that was playing keeps
+   * playing in the entry that takes its place.
+   *
    * **The player is named by the current entry**, and the device's own media
    * controls show the entry as the title. A player you gave a `label` keeps
    * your name, and only the title follows the entry.
    *
-   * **Keyboard.** Each entry is a button in the tab order, and Enter or Space
-   * plays it. The arrow keys move focus to the entry before or after, and Home
-   * and End to the first and the last, passing over disabled entries. The
+   * **Keyboard.** The entries take one stop in the tab order: the entry you
+   * last focused, or the current entry before you have focused one. Enter or
+   * Space plays it. The arrow keys move focus to the entry before or after, and
+   * Home and End to the first and the last, passing over disabled entries. The
    * current entry carries `aria-current`. While focus is on the player, the
    * player's own keys work, and `Video` lists them, and Shift with N or P plays
    * the next or the previous entry. The player's previous and next controls
@@ -63161,7 +63757,11 @@ export type CustomElements = {
    *
    * Component attributes and properties that can be applied to the element or by using JavaScript.
    *
+   * - `empty-label`/`emptyLabel`: What the playlist says while it has no entries. The `empty` slot replaces it.
    * - `label`: The list's name, read by screen readers.
+   * - `no-advance`/`noAdvance`: Stays on an entry when its clip ends, where the playlist would otherwise
+   * play the next one. The player's controls, a press, and `next()` still
+   * move. `repeat="one"` still plays the entry again.
    * - `playing-label`/`playingLabel`: What the live region says when the playlist moves to another entry.
    * `{title}` is the entry's name.
    *
@@ -63221,7 +63821,7 @@ export type CustomElements = {
    * Events that will be emitted by the component.
    *
    * - `helix-activate`: The current entry changed. The playlist already holds the new entry when this is sent, and `detail.previous` is the entry it left. `currentEntry` is the entry itself, with its `src`, `poster` and name.
-   * - `helix-before-activate`: The current entry is about to change. Cancelable: cancel it to keep the current entry.
+   * - `helix-before-activate`: The current entry is about to change, and `detail.cause` says why: `press`, `next`, `previous`, `ended`, or `removed`. Cancelable: cancel it to keep the current entry.
    * - `helix-end`: The last entry finished playing, and the playlist stopped there. Not sent while `repeat` is set.
    *
    * ## Slots
@@ -63229,6 +63829,7 @@ export type CustomElements = {
    * Areas where markup can be added to the component.
    *
    * - `(default)`: The entries.
+   * - `empty`: Shown while the playlist has no entries. Defaults to `empty-label`.
    * - `player`: The player that plays the entries.
    *
    * ## Methods
@@ -63240,19 +63841,21 @@ export type CustomElements = {
    * entry otherwise.
    * - `previous() => void`: Moves to the previous entry and plays it, as the player's previous control
    * does. Under `shuffle` it goes back through the order that played.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
    * Custom selectors for styling elements within the component.
    *
+   * - `empty`: The box that holds the `empty` slot, drawn while there are no entries.
    * - `items`: The list of entries.
    * - `live`: A live region that says which entry plays after the playlist moves.
    * - `player`: The region that holds the player.
@@ -63731,8 +64334,10 @@ export type CustomElements = {
    * **A grid.** `columns` lays the items out that many to a line, as a grid of
    * equal columns, and windows the set a line at a time, as React Aria's grid
    * layout does. Each item draws one element, a cell of the grid, and
-   * `estimate` is the height of a line. Space the items with padding inside
-   * each one, which the list measures with the line.
+   * `estimate` is the height of a line. `min-column-width` lays out as many
+   * columns as fit the box instead, as React Aria's grid layout does with its
+   * smallest item size, and follows the box as it resizes. `gap` spaces the rows, and the columns
+   * of a grid, by a number of pixels the list counts in each row's place.
    *
    * **Keyboard.** The list is one tab stop.
    *
@@ -63743,6 +64348,7 @@ export type CustomElements = {
    * | Home, End | Moves to the first or the last item. |
    * | Page Down, Page Up | Moves by the number of items, or of lines in a grid, on screen. |
    * | A letter or a word | Moves to the next item whose text starts with what you typed. |
+   * | Escape | Lets go of every chosen item, in a list with `selection-mode`. |
    * | Tab | Moves into the focused row's own links and buttons, then out of the list. |
    *
    * An item that is not drawn is scrolled into view and focused, so a keyboard
@@ -63759,12 +64365,23 @@ export type CustomElements = {
    * from: `single` selects one item and `multiple` any number. Space or a press
    * selects an item, Shift with Space, an arrow, Home, End or a press takes in
    * the items from the last one chosen, and Control or Command with A selects
-   * them all, in `multiple`. `value` holds the chosen items' keys, separated by
-   * commas, in the order of the set: `key-field` names each item's key, and a
-   * string or a number item is its own key. A change asks with
-   * `helix-before-change` and tells with `change`. Each row is an `option`
-   * marked `aria-selected`, so a row's own links and buttons are not reached
-   * there: keep those to a list without `selection-mode`.
+   * them all, in `multiple`. Escape lets go of every chosen item, and keeps the
+   * key from the dialog or menu around the list while there was something to
+   * let go of. `value` holds the chosen items' keys, separated by commas, in
+   * the order of the set: `key-field` names each item's key, and a string or a
+   * number item is its own key. A change asks with `helix-before-change` and
+   * tells with `change`. Each row is an `option` marked `aria-selected`, so a
+   * row's own links and buttons are not reached there: keep those to a list
+   * without `selection-mode`.
+   *
+   * `selection-behavior="replace"` selects the item pressed alone, as a file
+   * list does, and the arrow keys carry the selection with them. Control or
+   * Command with a press or with Space adds or takes out one item, and with an
+   * arrow moves without selecting.
+   *
+   * **Disabled items.** `disabled-keys` names items by their keys, separated by
+   * commas. Their rows carry `aria-disabled`, the keys and typing pass over
+   * them, and a press, Space, or Control with A does not select them.
    *
    * **Loading more.** `helix-range-change` fires as the items on screen change,
    * and `range` holds them. `helix-load-more` fires once a reader is within one
@@ -63806,6 +64423,8 @@ export type CustomElements = {
    * - `columns`: How many items a line holds. One, the default, is a list; more lays the
    * items out as a grid of that many equal columns, windowed a line at a
    * time, with Left and Right moving along a line.
+   * - `disabled-keys`/`disabledKeys`: The keys of the items a reader cannot choose or move to, separated by
+   * commas, as `value` writes keys. Their rows carry `aria-disabled`.
    * - `empty-label`/`emptyLabel`: The text of the row shown when there are no items and none are loading,
    * where the `empty` slot is empty. Empty, the default, shows no row.
    * - `estimate`: The height of one row, in pixels, used to find the row at a scroll offset.
@@ -63814,6 +64433,10 @@ export type CustomElements = {
    * right whenever the rows really are one height and is the cheaper of the two.
    * - `for`: The id of the script element that holds the items as JSON. `items` wins
    * where both are set.
+   * - `gap`: The space between two rows, and between two columns in a grid, in
+   * pixels. The list counts it in each row's place, so a gap does not walk
+   * the rows away from the scroll position the way a margin on each row
+   * would.
    * - `key-field`/`keyField`: The field of each item that is its key in `value`, as a key or a path of
    * keys. Empty reads a string or a number item as its own key, and any
    * other item by its place in the set.
@@ -63838,6 +64461,12 @@ export type CustomElements = {
    * disagree with itself; measuring is what a set of genuinely different
    * heights needs and costs a read of each row as it renders. A list of
    * one-line rows should leave this alone.
+   * - `min-column-width`/`minColumnWidth`: The narrowest a column of a grid may be, in pixels. Set, the list lays
+   * out as many columns as fit the box at that width, at least one, and
+   * follows the box as it resizes, which `columns` then does not decide.
+   * - `selection-behavior`/`selectionBehavior`: What a press does to the items already chosen: `toggle` adds or takes out
+   * the item, and `replace` selects it alone and lets the arrow keys carry the
+   * selection, with Control or Command adding or taking out one item.
    * - `selection-mode`/`selectionMode`: Makes the list a list box a reader chooses from: `single` selects one
    * item, and `multiple` any number. Unset is a list a reader reads.
    * - `text-field`/`textField`: The field of each item that typing matches, as a key or a path of keys
@@ -66749,6 +67378,16 @@ export type CustomElementsSolidJs = {
    * - What a key changes that a reader cannot see is said: where a card moved
    *   to, its new size, how many cards are selected, and the zoom. A selected
    *   card or connection says so when a reader arrives on it.
+   * - Control or Command with C copies the selected cards, and the connections
+   *   between them, as a JSON Canvas document in text, which another board or
+   *   an app that reads the format takes. A paste is your page's: listen for
+   *   `paste` on the board, read the text with `fromJsonCanvas`, and add the
+   *   cards it holds.
+   * - Control or Command with Z undoes the last move or resize the board made,
+   *   and with Shift, or Control with Y, makes it again. `undo()` and `redo()`
+   *   do the same from a script. Each asks with `helix-before-move` and tells
+   *   with `helix-move`, as a move does, so a board that holds its positions in
+   *   your state is undone through your state.
    *
    * Every drag also works with clicks, as WCAG 2.5.7 requires for a pointer that
    * cannot hold a button down. Click a selected card's move handle, a corner, a
@@ -66799,6 +67438,7 @@ export type CustomElementsSolidJs = {
    * this, so a reader hears the ends first and what the line says after.
    * - `controls-label`/`controlsLabel`: The name of the group of controls, read by screen readers, which names
    * what the controls drive rather than the mechanism.
+   * - `copied-label`/`copiedLabel`: What screen readers hear after a copy, with `{count}` for the cards copied.
    * - `fallback-label`/`fallbackLabel`: The board's name where `label` is empty.
    * - `label`: The accessible name for the board. Required.
    *
@@ -66844,6 +67484,7 @@ export type CustomElementsSolidJs = {
    * walk the cards.
    * - `reconnecting-label`/`reconnectingLabel`: The text announced when a connection's end is picked up, with `{from}` and
    * `{to}`.
+   * - `redone-label`/`redoneLabel`: What screen readers hear after a move or a resize is made again.
    * - `resized-label`/`resizedLabel`: What screen readers hear after a key resizes a card, with `{name}` for the
    * card and `{width}` and `{height}` for its new size, in the document's
    * units.
@@ -66901,6 +67542,7 @@ export type CustomElementsSolidJs = {
    * see the board is told by the color; this is how a reader who cannot is
    * told the same. A tone left out is not read.
    * - `two-finger-hint-label`/`twoFingerHintLabel`: The hint shown when one finger swipes over the board with `gestures="cooperative"`.
+   * - `undone-label`/`undoneLabel`: What screen readers hear after a move or a resize is undone.
    * - `using-label`/`usingLabel`: The line shown while the board, with `gestures="activate"`, has the gestures.
    * - `wheel-hint-label`/`wheelHintLabel`: The hint shown when the wheel scrolls past the board with
    * `gestures="cooperative"`. `{key}` is ⌘ on a Mac and Ctrl elsewhere.
@@ -67073,6 +67715,11 @@ export type CustomElementsSolidJs = {
    *
    * What a reader landing on a card off the edge of the view gets, and what a
    * page's own search or outline can call to take a reader to one.
+   * - `undo() => boolean`: Puts the cards of the last move or resize back where they stood, asking
+   * with `helix-before-move` first. Returns whether anything moved: false
+   * with nothing to undo, or when the request was refused.
+   * - `redo() => boolean`: Makes the last move or resize `undo` took back again, asking with
+   * `helix-before-move` first. Returns whether anything moved.
    * - `toJsonCanvas() => CanvasDocument`: The board as a JSON Canvas document, for saving it.
    *
    * What each card holds is the consumer's DOM, so a card comes back as a card
@@ -67914,6 +68561,19 @@ export type CustomElementsSolidJs = {
    * "Ada is typing" (`typing-label`), which a screen reader hears, and clearing
    * it takes them away. Anything slotted into `status` is drawn first.
    *
+   * **Keyboard.** The transcript moves between turns the way a feed does. Each
+   * turn says its place, such as "3 of 40", windowed or not.
+   *
+   * | Key | What it does |
+   * |---|---|
+   * | Page Down, Page Up | On a turn or inside one, moves focus to the next or the previous turn. On the transcript itself, moves focus to the turn at the top of the view. |
+   * | Control with End | Moves focus to the composer. |
+   * | Control with Home | Moves focus to the first control above the transcript, or to the transcript. |
+   *
+   * While you are scrolled away from the newest turn, the `resume` region shows
+   * a button that takes you back, named by `resume-label`, "Jump to latest".
+   * Slot your own control into `resume` to replace it.
+   *
    * A screen reader names each turn by its author and its time, such as "You, 2
    * minutes ago". Set `me-label` and `message-label` to say it in your language,
    * and give each turn by `them` an `author-label`. A turn with neither an author
@@ -67984,6 +68644,7 @@ export type CustomElementsSolidJs = {
    * is the way back, and that is a part inside the shadow tree where a
    * stylesheet can already reach it. Measured rather than assumed: `label,
    * pinned` after upgrade against `label` from the server.
+   * - `resume-label`/`resumeLabel`: The words on the button that returns to the newest turn, where `resume` is empty.
    * - `threshold`: How near the bottom still counts as being at it, in pixels.
    *
    * A hook rather than a constant, because the right number depends on how tall
@@ -68053,7 +68714,7 @@ export type CustomElementsSolidJs = {
    * - `actions`: Controls for the whole conversation, beside the header.
    * - `composer`: The composer, below the transcript.
    * - `header`: Content above the transcript that names the conversation.
-   * - `resume`: The control that returns to the bottom, shown while the user has scrolled away.
+   * - `resume`: The control that returns to the bottom, shown while the user has scrolled away. Defaults to a button named by `resume-label`.
    * - `status`: Status beside the composer, such as someone typing or a lost connection.
    *
    * ## Methods
@@ -68102,6 +68763,8 @@ export type CustomElementsSolidJs = {
    * - `message-state`: The state text of a turn from `turns`, when there is one to show.
    * - `message-time`: The time of a turn from `turns`.
    * - `resume`: The control shown while the user is scrolled away from the bottom.
+   * - `resume-button`: The button the `resume` region shows when nothing is slotted into it.
+   * - `resume-mark`: The arrow on the default `resume-button`.
    * - `status`: The status region, outside the log.
    * - `turn`: The wrapper around the message drawn for one turn from `turns`.
    * - `typing`: The words that say who is typing, in the status band, while `typing` names someone.
@@ -68618,7 +69281,18 @@ export type CustomElementsSolidJs = {
    * For a fragment of code inside a sentence, use `Code`.
    *
    * Set `line-numbers` to number the lines in a gutter beside the code, hidden
-   * from the accessibility tree and left out of a copy. Set `highlight` to a
+   * from the accessibility tree and left out of a copy. Set `mark-lines` to
+   * mark lines a reader should look at, such as `2, 4-6`: the block draws a
+   * band behind each run, placed where the lines are laid out, so it follows a
+   * highlighter's markup and lines that wrap. Set `wrap` to wrap long lines
+   * rather than scroll them; a gutter then numbers each line where it starts.
+   * Set `wrappable` for a button in the header that turns `wrap` on and off,
+   * pressed while the lines wrap.
+   *
+   * The header holds the name, the `actions` slot, and the copy button. Slot a
+   * control into `actions`, such as a button that sets `wrap` or one that opens
+   * the code in an editor, and the block draws a header for it even with no
+   * name. `copy-icon` and `copied-icon` replace the copy button's two icons. Set `highlight` to a
    * function that turns the code into highlighted markup, such as one wrapping
    * Shiki or Prism, and the block draws what it returns; it is handed the
    * block's `language`, so one function serves every block. The code stays in
@@ -68705,6 +69379,9 @@ export type CustomElementsSolidJs = {
    * copy, which takes the code alone. Reflected, because the stylesheet lays
    * the gutter out beside the code. A diff numbers its lines from its hunks
    * whether or not this is set.
+   * - `mark-lines`/`markLines`: The lines to mark, as numbers and ranges counted from 1, such as `2, 4-6`.
+   * Each run is drawn as a band behind its lines. Not for a diff, which marks
+   * its own changes.
    * - `no-copy`/`noCopy`: Whether to leave the copy button off.
    *
    * Negative, which is not a style choice. A boolean attribute is true whenever
@@ -68729,6 +69406,17 @@ export type CustomElementsSolidJs = {
    * Absent is unified, each removal above its replacement, which fits any
    * width. `split` sets the old version beside the new one. Optional rather
    * than defaulted, so the host carries no attribute the consumer did not write.
+   * - `wrap`: Whether long lines wrap. Without it they scroll.
+   *
+   * Off by default, so long lines scroll, because a line break can be
+   * significant in code and a wrapped line reads as two. For prose-like code,
+   * such as a long command or a log line, a wrap reads better than a scroll.
+   * With `line-numbers`, each number stands beside the line it numbers
+   * however many rows that line takes. Reflected, because the stylesheet
+   * wraps the lines.
+   * - `wrap-label`/`wrapLabel`: The wrap button's name, which it keeps whether it is pressed or not.
+   * - `wrappable`: Whether the header has a button that wraps the lines and unwraps them. The
+   * block draws a header for it even with no name.
    * - `highlight`: Turns the code into highlighted markup, which the block draws in place of
    * the plain text.
    *
@@ -68771,16 +69459,36 @@ export type CustomElementsSolidJs = {
    * browser harness's awaits it alone: a browser always runs the frame, and a
    * timer beside it was a bet on how long one takes, which a busy run lost. (property only) (readonly)
    *
+   * ## Events
+   *
+   * Events that will be emitted by the component.
+   *
+   * - `helix-before-toggle`: The wrap button was pressed, with the `wrap` it asks for in `detail.checked`. Cancelable: cancel it to keep the lines as they are.
+   * - `helix-toggle`: Fired after the wrap button changed `wrap`, with the new value in `detail.checked`.
+   *
    * ## Slots
    *
    * Areas where markup can be added to the component.
    *
    * - `(default)`: The code.
+   * - `actions`: Controls for the block, in the header before the copy button.
+   * - `copied-icon`: The copy button's icon after a copy. Defaults to a check mark.
+   * - `copy-icon`: The copy button's icon before a copy. Defaults to a clipboard.
+   *
+   * ## CSS Custom Properties
+   *
+   * CSS variables available for styling the component.
+   *
+   * - `--code-block-line-size`: Written by the block on each `number` in a `wrap` block with `line-numbers`: how tall the line it numbers is laid out. Do not set it.
+   * - `--code-block-mark-inline-size`: Written by the block on each `mark`: how wide the code is, scrolled part included. Do not set it.
+   * - `--code-block-mark-size`: Written by the block on each `mark`: how tall its run of lines is. Do not set it.
+   * - `--code-block-mark-start`: Written by the block on each `mark`: how far down the code its run of lines starts. Do not set it.
    *
    * ## CSS Parts
    *
    * Custom selectors for styling elements within the component.
    *
+   * - `actions`: The box in the header that holds the `actions` slot, drawn while something is slotted there.
    * - `added`: In a diff, a line only the new version has, an `<ins>`.
    * - `block`: The scrolling `<pre>`.
    * - `code`: The `<code>` inside it.
@@ -68809,13 +69517,15 @@ export type CustomElementsSolidJs = {
    * - `header`: The bar that holds the name and the copy button, shown when there is a name.
    * - `hunk`: In a diff, a `@@` line saying where the lines under it are.
    * - `label`: The block's name: its `label`, or its `language` where it has no label.
+   * - `mark`: The band behind a run of lines `mark-lines` names. The block writes where the run is laid out into `--code-block-mark-start`, `--code-block-mark-size`, and `--code-block-mark-inline-size` on it. Hidden from the accessibility tree.
    * - `marker`: In a diff, the `+`, `-`, or space that starts a line.
    * - `new`: In a split diff, the new version's `<pre>`.
-   * - `number`: In a diff, a line number.
+   * - `number`: In a diff, a line number. In a `wrap` block with `line-numbers`, one line's number in the gutter, which the block makes as tall as the line it numbers through `--code-block-line-size`.
    * - `old`: In a split diff, the old version's `<pre>`.
    * - `removed`: In a diff, a line only the old version has, a `<del>`.
    * - `split`: In a split diff, the two versions side by side.
    * - `text`: In a diff, a line's code.
+   * - `wrap-toggle`: The button in the header that wraps the lines and unwraps them, drawn when `wrappable` is set.
    *
    * ## CSS States
    *
@@ -74995,14 +75705,15 @@ export type CustomElementsSolidJs = {
    * - `pan(to: ViewportWay) => void`: Pans the view one step in a direction.
    * - `zoom(by: number) => void`: Zooms the view one step: `1` zooms in and `-1` zooms out.
    * - `toggleFullscreen() => void`: Turns fullscreen on or off.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
@@ -76861,14 +77572,15 @@ export type CustomElementsSolidJs = {
    * - `previous() => void`: Shows the previous item. Before the first item, it shows the last when
    * `loop` is set.
    * - `toggleFullscreen() => void`: Makes the viewer fill the screen, or exits fullscreen.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    * - `requestOpen(next: boolean) => boolean`: Requests that the element open or close, and returns whether the change
    * was applied.
    *
@@ -85948,6 +86660,13 @@ export type CustomElementsSolidJs = {
    * only whoever put it there knows that, which is the same reason `min` is a
    * consumer's to set.
    * - `corner-label`/`cornerLabel`: The name of the handle where two dividers cross, read by screen readers.
+   * - `corner-value-label`/`cornerValueLabel`: What the handle where two dividers cross says it is set to, both dividers
+   * at once: `{across}` is where the divider that runs down stands, and
+   * `{down}` where the one that runs across stands, each a percentage.
+   *
+   * **Both, because the handle moves both**, and a number names one: the
+   * handle's `aria-valuenow` is the divider its `aria-orientation` names, and
+   * these words are the whole of where it is.
    * - `default-collapsed`/`defaultCollapsed`: Which pane starts shut, when `collapsed` is not set.
    * - `default-position`/`defaultPosition`: Where the divider starts, when `position` is not set.
    * - `label`: The divider's name, read by screen readers.
@@ -86443,14 +87162,15 @@ export type CustomElementsSolidJs = {
    * and the invalid mark from every stage, as Ark UI's `resetStep` does.
    * Returns whether it moved: a listener can refuse the move with
    * `helix-before-activate`, and the stages then keep their marks.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Custom Properties
    *
@@ -87194,6 +87914,27 @@ export type CustomElementsSolidJs = {
    * Tab reaches each checkbox, and Space ticks it. To act on one row, put a
    * link or a button in a cell, or give the row an `href`.
    *
+   * `selection-mode="single"` selects one row at a time: ticking a row lets go
+   * of the one before, the heading holds no checkbox, and Shift and Control with
+   * A take in nothing more. `selection-behavior="replace"` makes a press on a
+   * row, anywhere but its own controls, select it alone, as a file list does,
+   * and in a `grid` table the arrow keys carry the selection with them. Control
+   * or Command with a press adds or takes out the row, and with an arrow moves
+   * without selecting. Shift with a press takes in the rows from the one last
+   * chosen.
+   *
+   * **Nesting rows.** A row with `parent` sits under the row of that key, as
+   * a file sits in a folder. The table then draws a column of disclosure
+   * buttons, under a heading named by `expand-column-label`: a row with rows
+   * under it has a button named by `expand-row-label` ("Expand {row}") that
+   * says with `aria-expanded` whether it is open, and the rows under a shut row
+   * are not drawn. `expanded` holds the open rows' keys, comma separated, and
+   * `default-expanded` is where it starts. A press asks with
+   * `helix-before-toggle` and tells with `helix-toggle`, both from the row, so
+   * you can refuse it or load the rows on the way. A sort orders the rows
+   * under each row among themselves, and in a `grid` table the table is a
+   * `treegrid` whose rows say their depth.
+   *
    * **Moving rows.** `reorderable` adds a column of grips before the checkboxes,
    * under a heading named by `row-grips-label`.
    *
@@ -87230,13 +87971,20 @@ export type CustomElementsSolidJs = {
    * | Enter on a cell of a row with `href` | Follows the row's link. |
    * | Enter, Space on a sortable heading | Sorts by the column. |
    * | Space on a row, Enter or Space on its checkbox cell | Selects the row, in a `selectable` table. |
+   * | Enter or Space on a disclosure cell | Shows or hides the rows under the row, in a table whose rows nest. |
    * | Enter or Space on a grip cell | Picks the row up, or drops it, in a `reorderable` table. Up, Down, Home, and End move a row picked up, and Escape puts it back. |
+   * | Down, Up, Page Down, Page Up under `selection-behavior="replace"` | Selects the row it moves to alone. Control or Command with the key moves without selecting. |
    * | Shift with Down or Up | Selects the rows it moves across, in a `selectable` table. |
    * | Shift with Space | Selects every row from the one last chosen, in a `selectable` table. |
    * | Control or Command with A | Selects every row, in a `selectable` table. |
    * | A letter or a word | Moves to the next row whose first cell starts with what you typed. |
    * | Tab | Leaves the table. |
    *
+   * **Loading more.** `load-more` sends `helix-load-more` once the end of the
+   * table comes within a screen of view, in the box that scrolls it or the
+   * page, once for each number of rows: add rows and it can send it again. Set
+   * `loading` while you fetch, and the table asks for nothing until it clears.
+   *
    * When the rows did not load, set `error-text`, such as "The orders did not
    * load", and put a button that tries again in the `error` slot. The line shows
    * after the rows in place of the empty and loading lines, the live region says
@@ -87282,6 +88030,8 @@ export type CustomElementsSolidJs = {
    * and a list here would be a second way to say what that says. This table's
    * cells are markup, and a table written as rows of cells with no column
    * declared in it has nowhere else to be sized from.
+   * - `default-expanded`/`defaultExpanded`: The keys of the rows whose rows are shown at the start, separated by
+   * commas. Used until `expanded` is set.
    * - `default-selected`/`defaultSelected`: The keys selected at the start, separated by commas. Used until `selected`
    * is set.
    * - `default-sort`/`defaultSort`: The starting sort order, used until `sort` is set.
@@ -87294,6 +88044,11 @@ export type CustomElementsSolidJs = {
    * While it is set, a line after the rows shows it, or your own content in the
    * `error` slot, in place of the empty and loading lines, and the live region
    * says it.
+   * - `expand-column-label`/`expandColumnLabel`: The name of the heading over the disclosure buttons.
+   * - `expanded`: The keys of the rows whose rows are shown, separated by commas, in a table
+   * whose rows nest. A press on a row's disclosure button asks first, and
+   * `default-expanded` seeds what this element then owns.
+   * - `expand-row-label`/`expandRowLabel`: The name of a row's disclosure button. `{row}` is the words of the row's first cell.
    * - `fallback-label`/`fallbackLabel`: The table's name where neither `label` nor an `aria-label` or
    * `aria-labelledby` on the host gives it one.
    * - `grid`: Makes the table a grid: one tab stop, and the arrow keys, Home, End and the
@@ -87307,6 +88062,8 @@ export type CustomElementsSolidJs = {
    *
    * An `aria-label` or `aria-labelledby` on the host names the table too, and
    * wins over this.
+   * - `load-more`/`loadMore`: Sends `helix-load-more` once the end of the table comes within a screen
+   * of view, so you can add the next rows as a reader nears them.
    * - `moved-label`/`movedLabel`: What screen readers hear each time a key moves a held row, in a
    * `reorderable` table. `{name}` is the row's words, `{position}` the place it
    * would go, counting from 1, and `{count}` the number of rows.
@@ -87320,6 +88077,8 @@ export type CustomElementsSolidJs = {
    * - `selectable`: Adds a column of checkboxes for selecting rows. Each row is known by its
    * `value`, and by its place among the rows as written where it has none.
    * - `select-all-label`/`selectAllLabel`: The name of the checkbox in the heading that selects every row.
+   * - `select-column-label`/`selectColumnLabel`: The name of the heading over the checkboxes under
+   * `selection-mode="single"`, where it holds no checkbox of its own.
    * - `selected`: The keys of the selected rows, separated by commas.
    *
    * A reader's press fires `helix-select` first, and refusing it leaves the
@@ -87329,6 +88088,11 @@ export type CustomElementsSolidJs = {
    * rows are chosen, written in the locale, and a language that needs plural
    * forms writes them: `{count, plural, one {# wybrany} few {# wybrane} many
    * {# wybranych} other {# wybranego}}`.
+   * - `selection-behavior`/`selectionBehavior`: What a press on a row, or in a `grid` table a key that moves to one, does
+   * to the rows already selected: `toggle`, the default, leaves them to the
+   * checkboxes, and `replace` selects the row alone.
+   * - `selection-mode`/`selectionMode`: How many rows a `selectable` table selects: `multiple`, the default, or
+   * `single`, one at a time.
    * - `select-row-label`/`selectRowLabel`: The name of a row's checkbox. `{row}` is replaced with the words of the
    * row's first cell.
    * - `sort`: The sort order, as `field:direction`, where `field` is a sortable column's
@@ -87377,11 +88141,14 @@ export type CustomElementsSolidJs = {
    * Events that will be emitted by the component.
    *
    * - `helix-before-reorder`: Fired when a row is dropped at a new place, in a `reorderable` table, with every row's key in the new order. Cancelable: cancel it to keep the row where it is.
+   * - `helix-before-toggle`: Fired from a row when its disclosure button is pressed, with whether it would be open in `detail.checked`. Cancelable: cancel it to keep the row as it is.
+   * - `helix-load-more`: Fired, in a table with `load-more`, when the end of the table comes within a screen of view, once for each number of rows.
    * - `helix-reorder`: Fired after `helix-before-reorder` when nobody canceled it. Move your rows to the order in `keys`. Cancelable: cancel it to say the move did not happen.
    * - `helix-select`: The selection is about to change. The event carries every selected key, separated by commas. Cancelable: cancel it to keep the current selection.
    * - `helix-selected`: Fired after the selection changes, with every selected key, separated by commas.
    * - `helix-sort`: A different sort order was requested, as `field:direction`, or empty for the order the rows were written in. Cancelable: cancel it to keep the current order.
    * - `helix-sorted`: Fired after the sort order changes, with the new order.
+   * - `helix-toggle`: Fired from a row once the rows under it are shown or hidden, with whether it is open in `detail.checked`.
    *
    * ## Slots
    *
@@ -87425,6 +88192,7 @@ export type CustomElementsSolidJs = {
    * - `drag-preview`: A copy of the row a pointer drags by its grip, which follows the pointer in the top layer until the row is let go, in a `reorderable` table. Hidden from assistive technology.
    * - `empty`: The text shown when there are no rows.
    * - `error`: The line shown after the rows while `error-text` is set, in place of the empty and loading text.
+   * - `expand-head`: The heading over the disclosure buttons, in a table whose rows nest.
    * - `grid-end`: An empty box after the rows, in a `grid` table. Tab focuses it on its way out of the table, so the key leaves from the end.
    * - `grid-start`: An empty box before the rows, in a `grid` table. Shift with Tab focuses it on its way out of the table.
    * - `grip-head`: The heading over the row grips, in a `reorderable` table.
@@ -87465,6 +88233,12 @@ export type CustomElementsSolidJs = {
    * the drop indicator is, with the `dragging`, `drop-before`, and `drop-after`
    * states.
    *
+   * **`parent` nests the row under another**, by that row's key. The table
+   * then draws a column of disclosure buttons: a row with rows under it has one,
+   * named by the table's `expand-row-label` and saying whether it is open with
+   * `aria-expanded`, and its rows are drawn only while it is open. The cell is
+   * indented by the row's depth through `--table-row-level`.
+   *
    * **`href` makes the whole row a link**, as a row action does in React Aria's
    * table: a press anywhere on the row follows it, except on a link or a control
    * of the row's own, and Control, Command or Shift open it the way they open a
@@ -87485,6 +88259,9 @@ export type CustomElementsSolidJs = {
    * reached.
    * - `href`: The URL a press on the row follows, which makes the whole row a link.
    * Empty, the default, leaves presses to the row's cells.
+   * - `parent`: The key of the row this one sits under, in a table whose rows nest: that
+   * row's `value`, or its place among the rows where it has none. Empty, the
+   * default, is a row at the top.
    * - `rel`: The `rel` of the row's link. You set it yourself, as on an anchor.
    * - `target`: Where the row's link opens, such as `_blank`.
    * - `value`: The key the table's `selected` lists this row by. Left empty, the row is
@@ -87516,6 +88293,12 @@ export type CustomElementsSolidJs = {
    *
    * - `(default)`: The row's cells.
    *
+   * ## CSS Custom Properties
+   *
+   * CSS variables available for styling the component.
+   *
+   * - `--table-row-level`: Written by the row on its `expand` cell: how deep the row sits, from 1. Do not set it.
+   *
    * ## CSS Parts
    *
    * Custom selectors for styling elements within the component.
@@ -87531,6 +88314,9 @@ export type CustomElementsSolidJs = {
    * - `checkbox-mark-checked`: Added to `checkbox-mark` while its box is checked.
    * - `checkbox-mark-dash`: Added to `checkbox-mark` while it draws the dash, which it keeps until its box is checked.
    * - `checkbox-mark-indeterminate`: Added to `checkbox-mark` while only some rows are selected.
+   * - `expand`: The cell that holds the row's disclosure button, in a table whose rows nest. It carries `--table-row-level`, the row's depth from 1.
+   * - `expand-button`: The button that shows and hides the rows under this one.
+   * - `expand-mark`: The caret on the disclosure button, which points along the line, turned down by the styled tier while the row is open.
    * - `grip`: The cell that holds the row's grip, in a `reorderable` table.
    * - `grip-button`: The button that moves the row.
    * - `grip-mark`: The icon on the grip.
@@ -87544,6 +88330,7 @@ export type CustomElementsSolidJs = {
    * - `dragging`: The row is being moved, in a `reorderable` table.
    * - `drop-after`: The row being moved goes after this one when it is dropped.
    * - `drop-before`: The row being moved goes before this one when it is dropped.
+   * - `expanded`: While the rows under this one are shown.
    * - `link`: While the row has `href` and is not `disabled`, so a press on it follows the link.
    * - `selected`: While the row is selected, in a `selectable` table.
    * - `settled`: Set one frame after the first render. Transitions wait for it, so an element does not animate its own arrival.
@@ -87802,14 +88589,15 @@ export type CustomElementsSolidJs = {
    *
    * Methods that can be called to access component functionality.
    *
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
@@ -89452,7 +90240,14 @@ export type CustomElementsSolidJs = {
    * counting parent, and no script. `Steps` and `Breadcrumbs` work the same way.
    *
    * `tone` sets the kind of event and is the only thing that colors the mark. It
-   * uses the same values as `Announcement`.
+   * uses the same values as `Announcement`. **A screen reader hears the tone as
+   * a word**, from `tone-labels`: the mark is an image named "Error",
+   * "Information", "Success" or "Warning", so the color is not the only place
+   * the meaning is. `neutral` and `primary` say nothing unless you name them.
+   *
+   * **`pending` marks an event that has not happened yet**, such as one that is
+   * scheduled. The mark is the open circle, and a screen reader hears
+   * `pending-label`, "Scheduled", with the tone's word.
    *
    * ## Attributes & Properties
    *
@@ -89464,11 +90259,20 @@ export type CustomElementsSolidJs = {
    * Whatever `<time>` accepts, which is a date, a time, both, a duration or a
    * week. Unset, the label is written as it was given and nothing claims to
    * know what instant it names.
+   * - `pending`: Marks an event that has not happened yet, such as one that is scheduled.
+   * The mark is the open circle, and a screen reader hears `pending-label`.
+   * - `pending-label`/`pendingLabel`: What a screen reader hears for an entry that is `pending`.
    * - `relative`: Writes the time as how long ago it was, or how long until it, from
    * `datetime`, where the `time` slot is empty: `long` ("3 hours ago"),
    * `short` ("3 hr. ago") or `narrow` ("3h ago"). Set with no value, it is
    * `long`. The words move on as they go stale.
-   * - `tone`: The kind of event. It sets the color of the mark and nothing else.
+   * - `tone`: The kind of event. It sets the color of the mark, and a screen reader
+   * hears it as the word `tone-labels` gives it.
+   * - `tone-label`/`toneLabel`: What a screen reader is told this entry's tone is, such as "Failed".
+   * Absent is the tone's word in `tone-labels`.
+   * - `tone-labels`/`toneLabels`: What a screen reader is told each tone is, by the tone's name, written as
+   * JSON in the attribute: `tone-labels='{"danger":"Failed"}'`. A tone with no
+   * word is not read, which is `neutral` and `primary` in English.
    * - `whenSettled`: Resolves a frame after the first update, when transitions are switched on.
    *
    * **Named `whenSettled` because `settled` is taken four times over**, by
@@ -89495,7 +90299,7 @@ export type CustomElementsSolidJs = {
    * Areas where markup can be added to the component.
    *
    * - `(default)`: What happened.
-   * - `marker`: The mark on the line. Defaults to a dot, which is the slot's fallback content.
+   * - `marker`: The mark on the line. Defaults to a dot, which is the slot's fallback content. A mark you slot is read as the tone's word, where the entry has one.
    * - `time`: When it happened, written the way you want it shown.
    *
    * ## CSS Parts
@@ -89504,7 +90308,7 @@ export type CustomElementsSolidJs = {
    *
    * - `content`: What happened, and the time above it.
    * - `dot`: The dot drawn when no marker is slotted.
-   * - `marker`: The mark on the line.
+   * - `marker`: The mark on the line. An image named by the tone's word, and by `pending-label`, where either applies.
    * - `rail`: The column that holds the mark and the line. Draw the two halves of the line with `::part(rail)::before` and `::part(rail)::after` in your stylesheet. This tier ships no CSS and renders no extra box for the line.
    * - `time`: When it happened.
    *
@@ -91468,14 +92272,15 @@ export type CustomElementsSolidJs = {
    *
    * Methods that can be called to access component functionality.
    *
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
@@ -91675,6 +92480,12 @@ export type CustomElementsSolidJs = {
    * Written by the playlist rather than by the entry, the way an option's
    * selection is: an entry that made itself current would be a second answer to
    * which one is playing. (property only)
+   * - `focusable`: Whether the entry holds the playlist's tab stop. Unset, every entry is in
+   * the tab order, which is what a server renders.
+   *
+   * **Written by the playlist, with no attribute, and it reaches the button.**
+   * The playlist gives the stop to the entry a reader last focused, or to the
+   * current one, and the arrow keys reach the rest. (property only)
    * - `text`: The entry's name: its own text, without the content in its named slots.
    *
    * `textContent` takes the whole subtree: a row with a duration in `meta`
@@ -91716,6 +92527,7 @@ export type CustomElementsSolidJs = {
    * Areas where markup can be added to the component.
    *
    * - `(default)`: The entry's name.
+   * - `indicator`: A mark shown on the entry that is playing, such as an equalizer icon. Rendered only while the entry is current.
    * - `media`: A thumbnail. Defaults to an image of `poster`.
    * - `meta`: Content after the name, such as a duration or a date.
    *
@@ -91731,6 +92543,7 @@ export type CustomElementsSolidJs = {
    * Custom selectors for styling elements within the component.
    *
    * - `container`: The list item that holds the button.
+   * - `indicator`: The `indicator` slot, at the end of the row, rendered only while the entry is playing. It draws no box until you give it one.
    * - `item`: The row, which is a button.
    * - `item-current`: Added to `item` for the entry that is playing.
    * - `label`: The name and the content after it.
@@ -91860,19 +92673,31 @@ export type CustomElementsSolidJs = {
    * - the player reaches the end.
    *
    * On `ended` the playlist advances and the next clip starts playing, because
-   * the user already pressed play once. `repeat` decides what happens at the
+   * the user already pressed play once. `no-advance` turns that off, and the
+   * playlist stays on the entry that ended. `repeat` decides what happens at the
    * end: `one` plays the same entry again, and `all` goes from the last entry
    * back to the first. Without it, the playlist stops on the last entry and
    * sends `helix-end`. `shuffle` plays the entries in a random order, starting
    * from the one that is current, and `previous` retraces that order.
    *
+   * **`helix-before-activate` says why the playlist is moving**, in
+   * `detail.cause`: `press` for an entry or a menu choice, `next` and
+   * `previous` for the player's controls and the methods, `ended` at the end of
+   * a clip, and `removed` when the current entry leaves the playlist. Cancel an
+   * `ended` move to show your own "Up next" countdown, then call `next()`.
+   *
+   * **Removing the current entry moves the playlist on**, to the entry after it,
+   * or to the one before it when it was the last. A clip that was playing keeps
+   * playing in the entry that takes its place.
+   *
    * **The player is named by the current entry**, and the device's own media
    * controls show the entry as the title. A player you gave a `label` keeps
    * your name, and only the title follows the entry.
    *
-   * **Keyboard.** Each entry is a button in the tab order, and Enter or Space
-   * plays it. The arrow keys move focus to the entry before or after, and Home
-   * and End to the first and the last, passing over disabled entries. The
+   * **Keyboard.** The entries take one stop in the tab order: the entry you
+   * last focused, or the current entry before you have focused one. Enter or
+   * Space plays it. The arrow keys move focus to the entry before or after, and
+   * Home and End to the first and the last, passing over disabled entries. The
    * current entry carries `aria-current`. While focus is on the player, the
    * player's own keys work, and `Video` lists them, and Shift with N or P plays
    * the next or the previous entry. The player's previous and next controls
@@ -91887,7 +92712,11 @@ export type CustomElementsSolidJs = {
    *
    * Component attributes and properties that can be applied to the element or by using JavaScript.
    *
+   * - `empty-label`/`emptyLabel`: What the playlist says while it has no entries. The `empty` slot replaces it.
    * - `label`: The list's name, read by screen readers.
+   * - `no-advance`/`noAdvance`: Stays on an entry when its clip ends, where the playlist would otherwise
+   * play the next one. The player's controls, a press, and `next()` still
+   * move. `repeat="one"` still plays the entry again.
    * - `playing-label`/`playingLabel`: What the live region says when the playlist moves to another entry.
    * `{title}` is the entry's name.
    *
@@ -91947,7 +92776,7 @@ export type CustomElementsSolidJs = {
    * Events that will be emitted by the component.
    *
    * - `helix-activate`: The current entry changed. The playlist already holds the new entry when this is sent, and `detail.previous` is the entry it left. `currentEntry` is the entry itself, with its `src`, `poster` and name.
-   * - `helix-before-activate`: The current entry is about to change. Cancelable: cancel it to keep the current entry.
+   * - `helix-before-activate`: The current entry is about to change, and `detail.cause` says why: `press`, `next`, `previous`, `ended`, or `removed`. Cancelable: cancel it to keep the current entry.
    * - `helix-end`: The last entry finished playing, and the playlist stopped there. Not sent while `repeat` is set.
    *
    * ## Slots
@@ -91955,6 +92784,7 @@ export type CustomElementsSolidJs = {
    * Areas where markup can be added to the component.
    *
    * - `(default)`: The entries.
+   * - `empty`: Shown while the playlist has no entries. Defaults to `empty-label`.
    * - `player`: The player that plays the entries.
    *
    * ## Methods
@@ -91966,19 +92796,21 @@ export type CustomElementsSolidJs = {
    * entry otherwise.
    * - `previous() => void`: Moves to the previous entry and plays it, as the player's previous control
    * does. Under `shuffle` it goes back through the order that played.
-   * - `requestActive(next: string) => boolean`: Requests a new current item, and returns whether the change was applied.
+   * - `requestActive(next: string, cause?: string) => boolean`: Requests a new current item, and returns whether the change was applied.
    *
    * Announces before it acts, so `preventDefault()` on the `helix-before-activate` is
    * a refusal and nothing moves. Unlike a native control, nothing has moved
    * by the time this runs, so refusing is simply not writing: there is
    * nothing to put back. Nobody refusing means the set updates itself,
    * whether or not a consumer declared `active`, a declared property being a
-   * seed and a correction.
+   * seed and a correction. `cause` says why, where the family names its
+   * causes, and reaches the event as `detail.cause`.
    *
    * ## CSS Parts
    *
    * Custom selectors for styling elements within the component.
    *
+   * - `empty`: The box that holds the `empty` slot, drawn while there are no entries.
    * - `items`: The list of entries.
    * - `live`: A live region that says which entry plays after the playlist moves.
    * - `player`: The region that holds the player.
@@ -92461,8 +93293,10 @@ export type CustomElementsSolidJs = {
    * **A grid.** `columns` lays the items out that many to a line, as a grid of
    * equal columns, and windows the set a line at a time, as React Aria's grid
    * layout does. Each item draws one element, a cell of the grid, and
-   * `estimate` is the height of a line. Space the items with padding inside
-   * each one, which the list measures with the line.
+   * `estimate` is the height of a line. `min-column-width` lays out as many
+   * columns as fit the box instead, as React Aria's grid layout does with its
+   * smallest item size, and follows the box as it resizes. `gap` spaces the rows, and the columns
+   * of a grid, by a number of pixels the list counts in each row's place.
    *
    * **Keyboard.** The list is one tab stop.
    *
@@ -92473,6 +93307,7 @@ export type CustomElementsSolidJs = {
    * | Home, End | Moves to the first or the last item. |
    * | Page Down, Page Up | Moves by the number of items, or of lines in a grid, on screen. |
    * | A letter or a word | Moves to the next item whose text starts with what you typed. |
+   * | Escape | Lets go of every chosen item, in a list with `selection-mode`. |
    * | Tab | Moves into the focused row's own links and buttons, then out of the list. |
    *
    * An item that is not drawn is scrolled into view and focused, so a keyboard
@@ -92489,12 +93324,23 @@ export type CustomElementsSolidJs = {
    * from: `single` selects one item and `multiple` any number. Space or a press
    * selects an item, Shift with Space, an arrow, Home, End or a press takes in
    * the items from the last one chosen, and Control or Command with A selects
-   * them all, in `multiple`. `value` holds the chosen items' keys, separated by
-   * commas, in the order of the set: `key-field` names each item's key, and a
-   * string or a number item is its own key. A change asks with
-   * `helix-before-change` and tells with `change`. Each row is an `option`
-   * marked `aria-selected`, so a row's own links and buttons are not reached
-   * there: keep those to a list without `selection-mode`.
+   * them all, in `multiple`. Escape lets go of every chosen item, and keeps the
+   * key from the dialog or menu around the list while there was something to
+   * let go of. `value` holds the chosen items' keys, separated by commas, in
+   * the order of the set: `key-field` names each item's key, and a string or a
+   * number item is its own key. A change asks with `helix-before-change` and
+   * tells with `change`. Each row is an `option` marked `aria-selected`, so a
+   * row's own links and buttons are not reached there: keep those to a list
+   * without `selection-mode`.
+   *
+   * `selection-behavior="replace"` selects the item pressed alone, as a file
+   * list does, and the arrow keys carry the selection with them. Control or
+   * Command with a press or with Space adds or takes out one item, and with an
+   * arrow moves without selecting.
+   *
+   * **Disabled items.** `disabled-keys` names items by their keys, separated by
+   * commas. Their rows carry `aria-disabled`, the keys and typing pass over
+   * them, and a press, Space, or Control with A does not select them.
    *
    * **Loading more.** `helix-range-change` fires as the items on screen change,
    * and `range` holds them. `helix-load-more` fires once a reader is within one
@@ -92536,6 +93382,8 @@ export type CustomElementsSolidJs = {
    * - `columns`: How many items a line holds. One, the default, is a list; more lays the
    * items out as a grid of that many equal columns, windowed a line at a
    * time, with Left and Right moving along a line.
+   * - `disabled-keys`/`disabledKeys`: The keys of the items a reader cannot choose or move to, separated by
+   * commas, as `value` writes keys. Their rows carry `aria-disabled`.
    * - `empty-label`/`emptyLabel`: The text of the row shown when there are no items and none are loading,
    * where the `empty` slot is empty. Empty, the default, shows no row.
    * - `estimate`: The height of one row, in pixels, used to find the row at a scroll offset.
@@ -92544,6 +93392,10 @@ export type CustomElementsSolidJs = {
    * right whenever the rows really are one height and is the cheaper of the two.
    * - `for`: The id of the script element that holds the items as JSON. `items` wins
    * where both are set.
+   * - `gap`: The space between two rows, and between two columns in a grid, in
+   * pixels. The list counts it in each row's place, so a gap does not walk
+   * the rows away from the scroll position the way a margin on each row
+   * would.
    * - `key-field`/`keyField`: The field of each item that is its key in `value`, as a key or a path of
    * keys. Empty reads a string or a number item as its own key, and any
    * other item by its place in the set.
@@ -92568,6 +93420,12 @@ export type CustomElementsSolidJs = {
    * disagree with itself; measuring is what a set of genuinely different
    * heights needs and costs a read of each row as it renders. A list of
    * one-line rows should leave this alone.
+   * - `min-column-width`/`minColumnWidth`: The narrowest a column of a grid may be, in pixels. Set, the list lays
+   * out as many columns as fit the box at that width, at least one, and
+   * follows the box as it resizes, which `columns` then does not decide.
+   * - `selection-behavior`/`selectionBehavior`: What a press does to the items already chosen: `toggle` adds or takes out
+   * the item, and `replace` selects it alone and lets the arrow keys carry the
+   * selection, with Control or Command adding or taking out one item.
    * - `selection-mode`/`selectionMode`: Makes the list a list box a reader chooses from: `single` selects one
    * item, and `multiple` any number. Unset is a list a reader reads.
    * - `text-field`/`textField`: The field of each item that typing matches, as a key or a path of keys
@@ -92691,6 +93549,14 @@ export type CustomCssProperties = {
   "--carousel-run-end"?: (string) | undefined;
   /** The narrowest a slide may be. `per-view="auto"` uses it to fit slides into the track. It must be a length, because the stylesheet divides by it. When unset, it is the whole track, which shows one slide across. */
   "--carousel-slide-min"?: (string) | undefined;
+  /** Written by the block on each `number` in a `wrap` block with `line-numbers`: how tall the line it numbers is laid out. Do not set it. */
+  "--code-block-line-size"?: (string) | undefined;
+  /** Written by the block on each `mark`: how wide the code is, scrolled part included. Do not set it. */
+  "--code-block-mark-inline-size"?: (string) | undefined;
+  /** Written by the block on each `mark`: how tall its run of lines is. Do not set it. */
+  "--code-block-mark-size"?: (string) | undefined;
+  /** Written by the block on each `mark`: how far down the code its run of lines starts. Do not set it. */
+  "--code-block-mark-start"?: (string) | undefined;
   /** The chosen color, painted over the checkerboard that shows transparency. */
   "--color-input-swatch"?: (string) | undefined;
   /** The chosen brightness, 0 to 100, as a percentage. */
@@ -92827,6 +93693,8 @@ export type CustomCssProperties = {
   "--table-cell-align"?: (string) | undefined;
   /** The column track list the table works out from its columns. The component writes it inline on the element that reads it, so setting it has no effect. Set `columns` to change the tracks. */
   "--table-template"?: (string) | undefined;
+  /** Written by the row on its `expand` cell: how deep the row sits, from 1. Do not set it. */
+  "--table-row-level"?: (string) | undefined;
   /** How long this message stays, in milliseconds, for a progress hint. */
   "--toast-duration"?: (string) | undefined;
   /** How far a swipe has moved the message across, in pixels, toward the right. */