@funnycode/myclaude 0.1.182 → 0.1.183

package/seed/marketplaces/ecc/skills/homelab-network-setup/SKILL.md

@@ -1,129 +1,129 @@
----
-name: homelab-network-setup
-description: Practical home and homelab network planning for gateways, switches, access points, IP ranges, DHCP reservations, DNS, cabling, and common beginner mistakes.
-origin: community
----
-
-# Homelab Network Setup
-
-Use this skill to design a home or small-lab network that can grow without
-needing a full rebuild.
-
-## When to Use
-
-- Planning a new home network or redesigning an ISP-router-only setup.
-- Choosing gateway, switch, and access point roles.
-- Designing IP ranges, DHCP scopes, static reservations, and DNS.
-- Preparing for future VLANs, Pi-hole, NAS, lab servers, or VPN access.
-- Troubleshooting a new network that has double NAT, unstable Wi-Fi, or changing
-  server addresses.
-
-## How It Works
-
-Start by separating device roles:
-
-```text
-Internet
-  |
-Modem or ONT
-  |
-Gateway or router      NAT, firewall, DHCP, DNS, inter-VLAN routing
-  |
-Managed switch         wired clients, AP uplinks, optional VLAN trunks
-  |
-Access points          Wi-Fi only; ideally wired backhaul
-Servers and NAS        stable addresses, DNS names, monitoring
-Clients and IoT        DHCP pools, isolated later if VLANs are available
-```
-
-Pick a gateway that matches the operator, not just the feature checklist:
-
-| Option | Best fit | Notes |
-| --- | --- | --- |
-| ISP router | Basic internet only | Limited control and often poor VLAN support |
-| UniFi gateway | Managed home network | Good UI, ecosystem lock-in |
-| OPNsense or pfSense | Flexible homelab | Strong VLAN, firewall, VPN, and DNS control |
-| MikroTik | Advanced network users | Powerful, but easy to misconfigure |
-| Linux router | Tinkerers | Document rollback before using as primary gateway |
-
-## IP Plan
-
-Avoid the most common default, `192.168.1.0/24`, when you expect to use VPNs.
-It often conflicts with hotels, offices, and ISP routers.
-
-```text
-Example small homelab plan:
-
-192.168.10.0/24  trusted clients
-192.168.20.0/24  IoT and media devices
-192.168.30.0/24  servers and NAS
-192.168.40.0/24  guest Wi-Fi
-192.168.99.0/24  network management
-
-Gateway convention: .1
-Infrastructure reservations: .2 through .49
-Dynamic DHCP pool: .50 through .240
-Spare room: .241 through .254
-```
-
-Use `home.arpa` for local names. It is reserved for home networks and avoids the
-leakage/conflict problems of ad hoc names like `home.lan`.
-
-```text
-nas.home.arpa
-pihole.home.arpa
-gateway.home.arpa
-switch-01.home.arpa
-```
-
-## DHCP And DNS
-
-- Use DHCP reservations for anything you SSH into, bookmark, monitor, or expose
-  as a service.
-- Hand out the gateway as DNS until a local resolver is intentionally deployed.
-- If using Pi-hole or another DNS filter, give it a reservation first, then point
-  DHCP DNS options at that address.
-- Keep a small static/reserved range per subnet so replacements do not collide
-  with dynamic leases.
-
-## Cabling And Wi-Fi
-
-- Prefer wired AP backhaul over mesh when you can run Ethernet.
-- Use a PoE switch for APs and cameras if the budget allows it.
-- Label both ends of each cable and keep a simple port map.
-- Put the gateway, switch, DNS server, and NAS on UPS power if outages are common.
-
-## Examples
-
-### Beginner Upgrade
-
-Goal: Keep the ISP router but stabilize a small lab.
-
-1. Set DHCP reservations for NAS, Pi, and any SSH hosts.
-2. Move local names to `home.arpa`.
-3. Disable duplicate DHCP servers on secondary routers or APs.
-4. Wire the main AP instead of relying on wireless backhaul.
-
-### VLAN-Ready Plan
-
-Goal: Prepare for future segmentation without enabling it immediately.
-
-1. Choose non-overlapping /24 ranges for trusted, IoT, servers, guest, and
-   management.
-2. Reserve .1 for the gateway and .2-.49 for infrastructure on every subnet.
-3. Buy a gateway and switch that support VLANs and inter-VLAN firewall rules.
-4. Document which SSIDs and switch ports will eventually map to each network.
-
-## Anti-Patterns
-
-- Double NAT without a reason or documentation.
-- Using `192.168.1.0/24` when VPN access is planned.
-- Dynamic addresses for NAS, Pi-hole, Home Assistant, or other service hosts.
-- Consumer routers repurposed as APs while their DHCP servers are still enabled.
-- Flat networks with cameras, smart plugs, laptops, and servers all sharing the
-  same trust boundary.
-
-## See Also
-
-- Skill: `network-interface-health`
-- Skill: `network-config-validation`
+---
+name: homelab-network-setup
+description: Practical home and homelab network planning for gateways, switches, access points, IP ranges, DHCP reservations, DNS, cabling, and common beginner mistakes.
+origin: community
+---
+
+# Homelab Network Setup
+
+Use this skill to design a home or small-lab network that can grow without
+needing a full rebuild.
+
+## When to Use
+
+- Planning a new home network or redesigning an ISP-router-only setup.
+- Choosing gateway, switch, and access point roles.
+- Designing IP ranges, DHCP scopes, static reservations, and DNS.
+- Preparing for future VLANs, Pi-hole, NAS, lab servers, or VPN access.
+- Troubleshooting a new network that has double NAT, unstable Wi-Fi, or changing
+  server addresses.
+
+## How It Works
+
+Start by separating device roles:
+
+```text
+Internet
+  |
+Modem or ONT
+  |
+Gateway or router      NAT, firewall, DHCP, DNS, inter-VLAN routing
+  |
+Managed switch         wired clients, AP uplinks, optional VLAN trunks
+  |
+Access points          Wi-Fi only; ideally wired backhaul
+Servers and NAS        stable addresses, DNS names, monitoring
+Clients and IoT        DHCP pools, isolated later if VLANs are available
+```
+
+Pick a gateway that matches the operator, not just the feature checklist:
+
+| Option | Best fit | Notes |
+| --- | --- | --- |
+| ISP router | Basic internet only | Limited control and often poor VLAN support |
+| UniFi gateway | Managed home network | Good UI, ecosystem lock-in |
+| OPNsense or pfSense | Flexible homelab | Strong VLAN, firewall, VPN, and DNS control |
+| MikroTik | Advanced network users | Powerful, but easy to misconfigure |
+| Linux router | Tinkerers | Document rollback before using as primary gateway |
+
+## IP Plan
+
+Avoid the most common default, `192.168.1.0/24`, when you expect to use VPNs.
+It often conflicts with hotels, offices, and ISP routers.
+
+```text
+Example small homelab plan:
+
+192.168.10.0/24  trusted clients
+192.168.20.0/24  IoT and media devices
+192.168.30.0/24  servers and NAS
+192.168.40.0/24  guest Wi-Fi
+192.168.99.0/24  network management
+
+Gateway convention: .1
+Infrastructure reservations: .2 through .49
+Dynamic DHCP pool: .50 through .240
+Spare room: .241 through .254
+```
+
+Use `home.arpa` for local names. It is reserved for home networks and avoids the
+leakage/conflict problems of ad hoc names like `home.lan`.
+
+```text
+nas.home.arpa
+pihole.home.arpa
+gateway.home.arpa
+switch-01.home.arpa
+```
+
+## DHCP And DNS
+
+- Use DHCP reservations for anything you SSH into, bookmark, monitor, or expose
+  as a service.
+- Hand out the gateway as DNS until a local resolver is intentionally deployed.
+- If using Pi-hole or another DNS filter, give it a reservation first, then point
+  DHCP DNS options at that address.
+- Keep a small static/reserved range per subnet so replacements do not collide
+  with dynamic leases.
+
+## Cabling And Wi-Fi
+
+- Prefer wired AP backhaul over mesh when you can run Ethernet.
+- Use a PoE switch for APs and cameras if the budget allows it.
+- Label both ends of each cable and keep a simple port map.
+- Put the gateway, switch, DNS server, and NAS on UPS power if outages are common.
+
+## Examples
+
+### Beginner Upgrade
+
+Goal: Keep the ISP router but stabilize a small lab.
+
+1. Set DHCP reservations for NAS, Pi, and any SSH hosts.
+2. Move local names to `home.arpa`.
+3. Disable duplicate DHCP servers on secondary routers or APs.
+4. Wire the main AP instead of relying on wireless backhaul.
+
+### VLAN-Ready Plan
+
+Goal: Prepare for future segmentation without enabling it immediately.
+
+1. Choose non-overlapping /24 ranges for trusted, IoT, servers, guest, and
+   management.
+2. Reserve .1 for the gateway and .2-.49 for infrastructure on every subnet.
+3. Buy a gateway and switch that support VLANs and inter-VLAN firewall rules.
+4. Document which SSIDs and switch ports will eventually map to each network.
+
+## Anti-Patterns
+
+- Double NAT without a reason or documentation.
+- Using `192.168.1.0/24` when VPN access is planned.
+- Dynamic addresses for NAS, Pi-hole, Home Assistant, or other service hosts.
+- Consumer routers repurposed as APs while their DHCP servers are still enabled.
+- Flat networks with cameras, smart plugs, laptops, and servers all sharing the
+  same trust boundary.
+
+## See Also
+
+- Skill: `network-interface-health`
+- Skill: `network-config-validation`