@fresh-editor/fresh-editor 0.1.67 → 0.1.70

package/plugins/buffer_modified.i18n.json

@@ -0,0 +1,32 @@
+{
+  "en": {
+    "status.loaded": "Buffer Modified plugin loaded",
+    "status.initialized": "Buffer Modified: initialized for %{path}",
+    "status.cleared_on_save": "Buffer Modified: cleared on save"
+  },
+  "es": {
+    "status.loaded": "Plugin Buffer Modificado cargado",
+    "status.initialized": "Buffer Modificado: inicializado para %{path}",
+    "status.cleared_on_save": "Buffer Modificado: limpiado al guardar"
+  },
+  "de": {
+    "status.loaded": "Buffer Modified Plugin geladen",
+    "status.initialized": "Buffer Modified: initialisiert für %{path}",
+    "status.cleared_on_save": "Buffer Modified: beim Speichern gelöscht"
+  },
+  "fr": {
+    "status.loaded": "Plugin Buffer Modified chargé",
+    "status.initialized": "Buffer Modified: initialisé pour %{path}",
+    "status.cleared_on_save": "Buffer Modified: effacé lors de la sauvegarde"
+  },
+  "ja": {
+    "status.loaded": "Buffer Modifiedプラグインを読み込みました",
+    "status.initialized": "Buffer Modified: %{path}を初期化しました",
+    "status.cleared_on_save": "Buffer Modified: 保存時にクリアしました"
+  },
+  "zh-CN": {
+    "status.loaded": "Buffer Modified插件已加载",
+    "status.initialized": "Buffer Modified: 已为%{path}初始化",
+    "status.cleared_on_save": "Buffer Modified: 保存时已清除"
+  }
+}

package/plugins/buffer_modified.ts

@@ -1,4 +1,6 @@
 /// <reference path="../types/fresh.d.ts" />
+const editor = getEditor();
+
 
 /**
  * Buffer Modified Plugin
@@ -145,7 +147,7 @@ globalThis.onBufferModifiedAfterFileOpen = function (args: {
 
   // Initialize tracking - file just loaded, no modifications yet
   initBufferState(bufferId);
-  editor.debug(`Buffer Modified: initialized for ${args.path}`);
+  editor.debug(editor.t("status.initialized", { path: args.path }));
 
   return true;
 };
@@ -180,7 +182,7 @@ globalThis.onBufferModifiedAfterSave = function (args: {
 
   // Clear all modified markers - buffer now matches disk
   clearModifiedState(bufferId);
-  editor.debug("Buffer Modified: cleared on save");
+  editor.debug(editor.t("status.cleared_on_save"));
 
   return true;
 };
@@ -276,4 +278,4 @@ if (initPath && initPath !== "") {
   initBufferState(initBufferId);
 }
 
-editor.debug("Buffer Modified plugin loaded");
+editor.debug(editor.t("status.loaded"));

package/plugins/calculator.i18n.json

@@ -0,0 +1,44 @@
+{
+  "en": {
+    "cmd.calculator": "Calculator",
+    "cmd.calculator_desc": "Open calculator",
+    "status.loaded": "Calculator plugin loaded",
+    "status.opened": "Calculator opened",
+    "status.copied": "Copied: {value}"
+  },
+  "es": {
+    "cmd.calculator": "Calculadora",
+    "cmd.calculator_desc": "Abrir calculadora",
+    "status.loaded": "Plugin de calculadora cargado",
+    "status.opened": "Calculadora abierta",
+    "status.copied": "Copiado: {value}"
+  },
+  "de": {
+    "cmd.calculator": "Taschenrechner",
+    "cmd.calculator_desc": "Taschenrechner offnen",
+    "status.loaded": "Taschenrechner-Plugin geladen",
+    "status.opened": "Taschenrechner geoffnet",
+    "status.copied": "Kopiert: {value}"
+  },
+  "fr": {
+    "cmd.calculator": "Calculatrice",
+    "cmd.calculator_desc": "Ouvrir la calculatrice",
+    "status.loaded": "Plugin calculatrice charge",
+    "status.opened": "Calculatrice ouverte",
+    "status.copied": "Copie: {value}"
+  },
+  "ja": {
+    "cmd.calculator": "電卓",
+    "cmd.calculator_desc": "電卓を開く",
+    "status.loaded": "電卓プラグインが読み込まれました",
+    "status.opened": "電卓を開きました",
+    "status.copied": "コピーしました: {value}"
+  },
+  "zh": {
+    "cmd.calculator": "计算器",
+    "cmd.calculator_desc": "打开计算器",
+    "status.loaded": "计算器插件已加载",
+    "status.opened": "计算器已打开",
+    "status.copied": "已复制: {value}"
+  }
+}

package/plugins/calculator.ts

@@ -1,4 +1,6 @@
 /// <reference path="../types/fresh.d.ts" />
+const editor = getEditor();
+
 
 /**
  * Calculator Plugin for Fresh Editor
@@ -272,7 +274,7 @@ function isCopyButtonAt(contentCol: number, contentRow: number): boolean {
 function copyResultToClipboard(): void {
   const textToCopy = state.error || state.result;
   editor.copyToClipboard(textToCopy);
-  editor.setStatus(`Copied: ${textToCopy}`);
+  editor.setStatus(editor.t("status.copied", { value: textToCopy }));
 }
 
 // Get button position at content-relative coordinates
@@ -721,7 +723,7 @@ globalThis.calculator_open = async function (): Promise<void> {
 
   state.splitId = editor.getActiveSplitId();
 
-  editor.setStatus("Calculator opened");
+  editor.setStatus(editor.t("status.opened"));
 };
 
 // Mouse move handler for hover effect
@@ -763,6 +765,6 @@ editor.on("mouse_click", "onCalculatorMouseClick");
 editor.on("mouse_move", "onCalculatorMouseMove");
 
 // Register main command
-editor.registerCommand("Calculator", "Open calculator", "calculator_open", "normal");
+editor.registerCommand("%cmd.calculator", "%cmd.calculator_desc", "calculator_open", "normal");
 
-editor.setStatus("Calculator plugin loaded");
+editor.setStatus(editor.t("status.loaded"));

package/plugins/clangd-lsp.ts

@@ -1,4 +1,6 @@
 /// <reference path="./lib/fresh.d.ts" />
+const editor = getEditor();
+
 
 /**
  * C/C++ LSP Helper Plugin

package/plugins/clangd_support.i18n.json

@@ -0,0 +1,104 @@
+{
+  "en": {
+    "cmd.project_setup": "Clangd: Project Setup",
+    "cmd.project_setup_desc": "Analyze C/C++ clangd readiness (compile_commands.json, .clangd)",
+    "cmd.switch_source_header": "Clangd: Switch Source/Header",
+    "cmd.switch_source_header_desc": "Jump to header/source pair using clangd",
+    "cmd.open_project_config": "Clangd: Open Project Config",
+    "cmd.open_project_config_desc": "Open the nearest .clangd file",
+    "status.plugin_loaded": "Clangd support plugin loaded (switch header + config commands)",
+    "status.no_active_file": "Clangd: there is no active file to switch",
+    "status.unsupported_file_type": "Clangd: unsupported file type for switch header",
+    "status.opened_corresponding_file": "Clangd: opened corresponding file",
+    "status.no_matching_found": "Clangd: no matching header/source found",
+    "status.switch_failed": "Clangd switch source/header failed: {error}",
+    "status.opened_config": "Opened .clangd configuration",
+    "status.config_not_found": "Could not find .clangd configuration in workspace",
+    "status.file_status": "Clangd file status: {status}"
+  },
+  "es": {
+    "cmd.project_setup": "Clangd: Configuracion del Proyecto",
+    "cmd.project_setup_desc": "Analizar preparacion de clangd para C/C++ (compile_commands.json, .clangd)",
+    "cmd.switch_source_header": "Clangd: Alternar Fuente/Cabecera",
+    "cmd.switch_source_header_desc": "Saltar al par cabecera/fuente usando clangd",
+    "cmd.open_project_config": "Clangd: Abrir Configuracion del Proyecto",
+    "cmd.open_project_config_desc": "Abrir el archivo .clangd mas cercano",
+    "status.plugin_loaded": "Plugin de soporte Clangd cargado (comandos de alternar cabecera + configuracion)",
+    "status.no_active_file": "Clangd: no hay archivo activo para alternar",
+    "status.unsupported_file_type": "Clangd: tipo de archivo no soportado para alternar cabecera",
+    "status.opened_corresponding_file": "Clangd: archivo correspondiente abierto",
+    "status.no_matching_found": "Clangd: no se encontro cabecera/fuente coincidente",
+    "status.switch_failed": "Clangd alternar fuente/cabecera fallo: {error}",
+    "status.opened_config": "Configuracion .clangd abierta",
+    "status.config_not_found": "No se pudo encontrar configuracion .clangd en el espacio de trabajo",
+    "status.file_status": "Estado del archivo Clangd: {status}"
+  },
+  "de": {
+    "cmd.project_setup": "Clangd: Projekteinrichtung",
+    "cmd.project_setup_desc": "C/C++ clangd-Bereitschaft analysieren (compile_commands.json, .clangd)",
+    "cmd.switch_source_header": "Clangd: Quelle/Header wechseln",
+    "cmd.switch_source_header_desc": "Zum Header/Quell-Paar mit clangd springen",
+    "cmd.open_project_config": "Clangd: Projektkonfiguration offnen",
+    "cmd.open_project_config_desc": "Die nachste .clangd-Datei offnen",
+    "status.plugin_loaded": "Clangd-Support-Plugin geladen (Header-Wechsel + Konfigurations-Befehle)",
+    "status.no_active_file": "Clangd: keine aktive Datei zum Wechseln",
+    "status.unsupported_file_type": "Clangd: nicht unterstutzter Dateityp fur Header-Wechsel",
+    "status.opened_corresponding_file": "Clangd: entsprechende Datei geoffnet",
+    "status.no_matching_found": "Clangd: kein passendes Header/Quelle gefunden",
+    "status.switch_failed": "Clangd Quelle/Header-Wechsel fehlgeschlagen: {error}",
+    "status.opened_config": ".clangd-Konfiguration geoffnet",
+    "status.config_not_found": "Konnte .clangd-Konfiguration im Arbeitsbereich nicht finden",
+    "status.file_status": "Clangd Dateistatus: {status}"
+  },
+  "fr": {
+    "cmd.project_setup": "Clangd: Configuration du Projet",
+    "cmd.project_setup_desc": "Analyser la disponibilite de clangd pour C/C++ (compile_commands.json, .clangd)",
+    "cmd.switch_source_header": "Clangd: Basculer Source/En-tete",
+    "cmd.switch_source_header_desc": "Aller a la paire en-tete/source avec clangd",
+    "cmd.open_project_config": "Clangd: Ouvrir la Configuration du Projet",
+    "cmd.open_project_config_desc": "Ouvrir le fichier .clangd le plus proche",
+    "status.plugin_loaded": "Plugin de support Clangd charge (commandes de bascule en-tete + configuration)",
+    "status.no_active_file": "Clangd: aucun fichier actif a basculer",
+    "status.unsupported_file_type": "Clangd: type de fichier non supporte pour la bascule d'en-tete",
+    "status.opened_corresponding_file": "Clangd: fichier correspondant ouvert",
+    "status.no_matching_found": "Clangd: aucun en-tete/source correspondant trouve",
+    "status.switch_failed": "Clangd bascule source/en-tete echouee: {error}",
+    "status.opened_config": "Configuration .clangd ouverte",
+    "status.config_not_found": "Impossible de trouver la configuration .clangd dans l'espace de travail",
+    "status.file_status": "Statut du fichier Clangd: {status}"
+  },
+  "ja": {
+    "cmd.project_setup": "Clangd: プロジェクト設定",
+    "cmd.project_setup_desc": "C/C++ clangdの準備状況を分析 (compile_commands.json, .clangd)",
+    "cmd.switch_source_header": "Clangd: ソース/ヘッダー切り替え",
+    "cmd.switch_source_header_desc": "clangdを使用してヘッダー/ソースのペアにジャンプ",
+    "cmd.open_project_config": "Clangd: プロジェクト設定を開く",
+    "cmd.open_project_config_desc": "最も近い.clangdファイルを開く",
+    "status.plugin_loaded": "Clangdサポートプラグインがロードされました（ヘッダー切り替え + 設定コマンド）",
+    "status.no_active_file": "Clangd: 切り替えるアクティブなファイルがありません",
+    "status.unsupported_file_type": "Clangd: ヘッダー切り替えに対応していないファイル形式です",
+    "status.opened_corresponding_file": "Clangd: 対応するファイルを開きました",
+    "status.no_matching_found": "Clangd: 一致するヘッダー/ソースが見つかりません",
+    "status.switch_failed": "Clangdソース/ヘッダー切り替えに失敗しました: {error}",
+    "status.opened_config": ".clangd設定を開きました",
+    "status.config_not_found": "ワークスペース内に.clangd設定が見つかりません",
+    "status.file_status": "Clangdファイルステータス: {status}"
+  },
+  "zh": {
+    "cmd.project_setup": "Clangd: 项目设置",
+    "cmd.project_setup_desc": "分析C/C++ clangd就绪状态 (compile_commands.json, .clangd)",
+    "cmd.switch_source_header": "Clangd: 切换源文件/头文件",
+    "cmd.switch_source_header_desc": "使用clangd跳转到头文件/源文件对",
+    "cmd.open_project_config": "Clangd: 打开项目配置",
+    "cmd.open_project_config_desc": "打开最近的.clangd文件",
+    "status.plugin_loaded": "Clangd支持插件已加载（切换头文件 + 配置命令）",
+    "status.no_active_file": "Clangd: 没有活动文件可切换",
+    "status.unsupported_file_type": "Clangd: 不支持的文件类型，无法切换头文件",
+    "status.opened_corresponding_file": "Clangd: 已打开对应文件",
+    "status.no_matching_found": "Clangd: 未找到匹配的头文件/源文件",
+    "status.switch_failed": "Clangd切换源文件/头文件失败: {error}",
+    "status.opened_config": "已打开.clangd配置",
+    "status.config_not_found": "在工作区中找不到.clangd配置",
+    "status.file_status": "Clangd文件状态: {status}"
+  }
+}

package/plugins/clangd_support.ts

@@ -1,4 +1,6 @@
 /// <reference path="../types/fresh.d.ts" />
+const editor = getEditor();
+
 
 /**
  * Clangd helper plugin
@@ -60,13 +62,13 @@ globalThis.clangdSwitchSourceHeader = async function(): Promise<void> {
   const bufferId = editor.getActiveBufferId();
   const path = editor.getBufferPath(bufferId);
   if (!path) {
-    setClangdStatus("Clangd: there is no active file to switch");
+    setClangdStatus(editor.t("status.no_active_file"));
     return;
   }
 
   const language = detectLanguage(path);
   if (!language) {
-    setClangdStatus("Clangd: unsupported file type for switch header");
+    setClangdStatus(editor.t("status.unsupported_file_type"));
     return;
   }
 
@@ -80,17 +82,17 @@ globalThis.clangdSwitchSourceHeader = async function(): Promise<void> {
     if (typeof result === "string" && result.length > 0) {
       const targetPath = fileUriToPath(result);
       editor.openFile(targetPath, 0, 0);
-      setClangdStatus("Clangd: opened corresponding file");
+      setClangdStatus(editor.t("status.opened_corresponding_file"));
       return;
     }
-    setClangdStatus("Clangd: no matching header/source found");
+    setClangdStatus(editor.t("status.no_matching_found"));
   } catch (err) {
-    setClangdStatus(`Clangd switch source/header failed: ${err}`);
+    setClangdStatus(editor.t("status.switch_failed", { error: String(err) }));
     editor.debug(`clangdSwitchSourceHeader error: ${err}`);
   }
 };
 
-const projectPanel = new PanelManager("Clangd project setup", "clangd-project-setup");
+const projectPanel = new PanelManager(editor, "Clangd project setup", "clangd-project-setup");
 
 function pathDesc(path: string): string {
   if (!path) {
@@ -246,8 +248,8 @@ globalThis.clangdProjectSetup = async function (): Promise<void> {
 };
 
 editor.registerCommand(
-  "Clangd: Project Setup",
-  "Analyze C/C++ clangd readiness (compile_commands.json, .clangd)",
+  "%cmd.project_setup",
+  "%cmd.project_setup_desc",
   "clangdProjectSetup",
   ""
 );
@@ -270,32 +272,32 @@ globalThis.clangdOpenProjectConfig = function(): void {
     const configPath = editor.pathJoin(dir, ".clangd");
     if (editor.fileExists(configPath)) {
       editor.openFile(configPath, 0, 0);
-      setClangdStatus("Opened .clangd configuration");
+      setClangdStatus(editor.t("status.opened_config"));
       opened = true;
       break;
     }
   }
 
   if (!opened) {
-    setClangdStatus("Could not find .clangd configuration in workspace");
+    setClangdStatus(editor.t("status.config_not_found"));
   }
 };
 
 editor.registerCommand(
-  "Clangd: Switch Source/Header",
-  "Jump to header/source pair using clangd",
+  "%cmd.switch_source_header",
+  "%cmd.switch_source_header_desc",
   "clangdSwitchSourceHeader",
   "normal"
 );
 
 editor.registerCommand(
-  "Clangd: Open Project Config",
-  "Open the nearest .clangd file",
+  "%cmd.open_project_config",
+  "%cmd.open_project_config_desc",
   "clangdOpenProjectConfig",
   "normal"
 );
 
-setClangdStatus("Clangd support plugin loaded (switch header + config commands)");
+setClangdStatus(editor.t("status.plugin_loaded"));
 
 globalThis.onClangdCustomNotification = function(payload: {
   language: string;
@@ -313,7 +315,7 @@ globalThis.onClangdCustomNotification = function(payload: {
   if (payload.method === "textDocument/clangd.fileStatus" && payload.params) {
     const status = (payload.params as any).status ?? "unknown";
     editor.debug(`Clangd file status: ${JSON.stringify(status)}`);
-    setClangdStatus(`Clangd file status: ${status}`);
+    setClangdStatus(editor.t("status.file_status", { status: String(status) }));
   } else if (payload.method === "$/memoryUsage" && payload.params) {
     const usage = (payload.params as any).used ?? "unknown";
     editor.debug(`Clangd memory usage: ${usage}`);

package/plugins/color_highlighter.i18n.json

@@ -0,0 +1,68 @@
+{
+  "en": {
+    "cmd.enable": "Color Highlighter: Enable",
+    "cmd.enable_desc": "Enable color code highlighting with swatches",
+    "cmd.disable": "Color Highlighter: Disable",
+    "cmd.disable_desc": "Disable color code highlighting",
+    "cmd.toggle": "Color Highlighter: Toggle",
+    "cmd.toggle_desc": "Toggle color code highlighting",
+    "status.enabled": "Color Highlighter: Enabled",
+    "status.disabled": "Color Highlighter: Disabled",
+    "status.loaded": "Color Highlighter plugin loaded"
+  },
+  "es": {
+    "cmd.enable": "Resaltador de Colores: Activar",
+    "cmd.enable_desc": "Activar resaltado de códigos de color con muestras",
+    "cmd.disable": "Resaltador de Colores: Desactivar",
+    "cmd.disable_desc": "Desactivar resaltado de códigos de color",
+    "cmd.toggle": "Resaltador de Colores: Alternar",
+    "cmd.toggle_desc": "Alternar resaltado de códigos de color",
+    "status.enabled": "Resaltador de Colores: Activado",
+    "status.disabled": "Resaltador de Colores: Desactivado",
+    "status.loaded": "Plugin Resaltador de Colores cargado"
+  },
+  "de": {
+    "cmd.enable": "Farbhervorhebung: Aktivieren",
+    "cmd.enable_desc": "Farbcode-Hervorhebung mit Farbfeldern aktivieren",
+    "cmd.disable": "Farbhervorhebung: Deaktivieren",
+    "cmd.disable_desc": "Farbcode-Hervorhebung deaktivieren",
+    "cmd.toggle": "Farbhervorhebung: Umschalten",
+    "cmd.toggle_desc": "Farbcode-Hervorhebung umschalten",
+    "status.enabled": "Farbhervorhebung: Aktiviert",
+    "status.disabled": "Farbhervorhebung: Deaktiviert",
+    "status.loaded": "Farbhervorhebung-Plugin geladen"
+  },
+  "fr": {
+    "cmd.enable": "Surligneur de Couleurs: Activer",
+    "cmd.enable_desc": "Activer le surlignage des codes couleur avec aperçu",
+    "cmd.disable": "Surligneur de Couleurs: Désactiver",
+    "cmd.disable_desc": "Désactiver le surlignage des codes couleur",
+    "cmd.toggle": "Surligneur de Couleurs: Basculer",
+    "cmd.toggle_desc": "Basculer le surlignage des codes couleur",
+    "status.enabled": "Surligneur de Couleurs: Activé",
+    "status.disabled": "Surligneur de Couleurs: Désactivé",
+    "status.loaded": "Plugin Surligneur de Couleurs chargé"
+  },
+  "ja": {
+    "cmd.enable": "カラーハイライター: 有効化",
+    "cmd.enable_desc": "カラーコードのハイライトとスウォッチ表示を有効化",
+    "cmd.disable": "カラーハイライター: 無効化",
+    "cmd.disable_desc": "カラーコードのハイライトを無効化",
+    "cmd.toggle": "カラーハイライター: 切り替え",
+    "cmd.toggle_desc": "カラーコードのハイライトを切り替え",
+    "status.enabled": "カラーハイライター: 有効",
+    "status.disabled": "カラーハイライター: 無効",
+    "status.loaded": "カラーハイライタープラグインを読み込みました"
+  },
+  "zh-CN": {
+    "cmd.enable": "颜色高亮器: 启用",
+    "cmd.enable_desc": "启用颜色代码高亮显示和色块预览",
+    "cmd.disable": "颜色高亮器: 禁用",
+    "cmd.disable_desc": "禁用颜色代码高亮显示",
+    "cmd.toggle": "颜色高亮器: 切换",
+    "cmd.toggle_desc": "切换颜色代码高亮显示",
+    "status.enabled": "颜色高亮器: 已启用",
+    "status.disabled": "颜色高亮器: 已禁用",
+    "status.loaded": "颜色高亮器插件已加载"
+  }
+}

package/plugins/color_highlighter.ts

@@ -1,6 +1,8 @@
 // TypeScript Color Highlighter Plugin
 // Highlights color codes in source code with a colored swatch
 // Supports: #RGB, #RRGGBB, rgb(), rgba(), hsl(), hsla(), Color::Rgb()
+const editor = getEditor();
+
 
 interface ColorHighlighterConfig {
   enabled: boolean;
@@ -253,14 +255,14 @@ globalThis.colorHighlighterEnable = function(): void {
   // Refresh lines so next render processes all visible lines
   const bufferId = editor.getActiveBufferId();
   editor.refreshLines(bufferId);
-  editor.setStatus("Color Highlighter: Enabled");
+  editor.setStatus(editor.t("status.enabled"));
 };
 
 globalThis.colorHighlighterDisable = function(): void {
   config.enabled = false;
   const bufferId = editor.getActiveBufferId();
   clearHighlights(bufferId);
-  editor.setStatus("Color Highlighter: Disabled");
+  editor.setStatus(editor.t("status.disabled"));
 };
 
 globalThis.colorHighlighterToggle = function(): void {
@@ -272,31 +274,31 @@ globalThis.colorHighlighterToggle = function(): void {
   } else {
     clearHighlights(bufferId);
   }
-  editor.setStatus(`Color Highlighter: ${config.enabled ? "Enabled" : "Disabled"}`);
+  editor.setStatus(config.enabled ? editor.t("status.enabled") : editor.t("status.disabled"));
 };
 
 // Register commands
 editor.registerCommand(
-  "Color Highlighter: Enable",
-  "Enable color code highlighting with swatches",
+  "%cmd.enable",
+  "%cmd.enable_desc",
   "colorHighlighterEnable",
   "normal"
 );
 
 editor.registerCommand(
-  "Color Highlighter: Disable",
-  "Disable color code highlighting",
+  "%cmd.disable",
+  "%cmd.disable_desc",
   "colorHighlighterDisable",
   "normal"
 );
 
 editor.registerCommand(
-  "Color Highlighter: Toggle",
-  "Toggle color code highlighting",
+  "%cmd.toggle",
+  "%cmd.toggle_desc",
   "colorHighlighterToggle",
   "normal"
 );
 
 // Initialization
-editor.setStatus("Color Highlighter plugin loaded");
+editor.setStatus(editor.t("status.loaded"));
 editor.debug("Color Highlighter initialized - supports hex, rgb, hsl, and Rust Color::Rgb");