@foxden-app/foxclaw 0.2.4 → 0.2.6

package/docs/troubleshooting.md

@@ -1,236 +1,236 @@
-# Troubleshooting
-
-Start with these commands:
-
-```bash
-foxclaw doctor
-foxclaw status
-```
-
-If FoxClaw is installed as a Linux user service, also check:
-
-```bash
-systemctl --user status foxclaw.service
-journalctl --user -u foxclaw.service -f
-```
-
-## Doctor Failures
-
-| Symptom | Meaning | Fix |
-| --- | --- | --- |
-| `[FAIL] node >= 24` | Your current shell is using an older Node.js. | Run `nvm install 24 && nvm use 24`, then rerun `foxclaw doctor`. If the service uses old Node, reinstall it from a Node 24 shell with `foxclaw start`. |
-| `[FAIL] codex cli available` | The `codex` command is not in PATH. | Install Codex CLI or fix PATH, then confirm `codex --version` works. |
-| `[FAIL] telegram bot token configured` | `TG_BOT_TOKEN` is missing from `.env`. | Copy the token from `@BotFather` into `.env`. |
-| `[FAIL] telegram allowed user configured` | `TG_ALLOWED_USER_ID` is missing from `.env`. | Get your numeric id from `@userinfobot` and add it to `.env`. |
-| `[FAIL] default cwd exists` | `DEFAULT_CWD` points to a folder that does not exist. | Create the folder or change `DEFAULT_CWD` to an existing absolute path. |
-
-## Node Or npm Is Missing
-
-If you see `node: command not found` or `npm: command not found`, install Node.js 24 with `nvm`:
-
-```bash
-curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.3/install.sh | bash
-export NVM_DIR="$HOME/.nvm"
-[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
-nvm install 24
-nvm use 24
-node -v
-npm -v
-```
-
-If it still fails, close the terminal, open a new one, and run:
-
-```bash
-nvm use 24
-```
-
-## npm Permission Errors
-
-If `npm install -g @openai/codex` fails with `EACCES`, `EPERM`, or `permission denied`, your global npm directory is not writable by your user.
-
-Recommended fix: use Node through `nvm`, then install again:
-
-```bash
-nvm install 24
-nvm use 24
-npm install -g @openai/codex
-```
-
-Avoid `sudo npm install -g ...` unless you already understand how your Node installation is managed. Mixing `sudo`, system Node, and `nvm` is a common source of broken PATHs.
-
-If `codex` installs but FoxClaw still cannot find it, locate the binary:
-
-```bash
-command -v codex
-```
-
-Then put the absolute path in `.env`:
-
-```dotenv
-CODEX_CLI_BIN=/absolute/path/to/codex
-```
-
-## Bot Does Not Reply
-
-Check these in order:
-
-1. Make sure FoxClaw is running:
-
-   ```bash
-   foxclaw status
-   ```
-
-2. Try private chat first. Open your bot directly and send:
-
-   ```text
-   /help
-   ```
-
-3. Confirm `TG_ALLOWED_USER_ID` is your numeric Telegram id, not your `@username`.
-
-4. Confirm the bot token in `.env` belongs to the bot you are messaging.
-
-5. Restart after changing `.env`:
-
-   ```bash
-   foxclaw start
-   ```
-
-   If running foreground mode, stop with `Ctrl+C` and run `foxclaw serve` again.
-
-## Group Messages Do Not Work
-
-Private chat is the easiest mode. For groups and topics:
-
-1. Add the bot to the group.
-2. Disable the bot's `privacy mode` in `@BotFather`.
-3. Promote the bot to administrator.
-4. Remove and re-add the bot if privacy mode was changed after it joined.
-5. Configure `TG_ALLOWED_CHAT_ID`, and optionally `TG_ALLOWED_TOPIC_ID`.
-
-Explicit commands such as `/status@botname` can work even when normal group messages are blocked by privacy mode, so verify with a plain natural-language message too.
-
-## Get Group Or Topic IDs
-
-1. Stop FoxClaw.
-2. Send a new message in the target group or topic.
-3. Open:
-
-   ```text
-   https://api.telegram.org/bot<YOUR_BOT_TOKEN>/getUpdates
-   ```
-
-4. Use `message.chat.id` as `TG_ALLOWED_CHAT_ID`.
-5. Use `message.message_thread_id` as `TG_ALLOWED_TOPIC_ID`.
-
-If FoxClaw is still running, it may consume the update before you inspect it.
-
-## Telegram Polling Conflict
-
-If Telegram reports conflicts or the same bot behaves strangely, two processes may be polling the same bot token.
-
-Check old and new services:
-
-```bash
-systemctl --user is-active foxclaw.service
-systemctl --user is-active telegram-codex-app-bridge.service 2>/dev/null || true
-```
-
-Stop the old service:
-
-```bash
-systemctl --user disable --now telegram-codex-app-bridge.service
-```
-
-Then restart FoxClaw:
-
-```bash
-foxclaw start
-```
-
-## Codex Or App-Server Fails
-
-FoxClaw requires local Codex auth. Check:
-
-```bash
-codex --version
-```
-
-If Codex is not logged in:
-
-```bash
-codex login
-```
-
-`codex --version` only verifies the command exists. To verify auth, run:
-
-```bash
-codex
-```
-
-Then ask:
-
-```text
-Say ready and exit.
-```
-
-If your CLI supports `codex login status`, that is also useful, but a normal successful prompt is the most reliable check.
-
-FoxClaw app-server logs are stored here by default:
-
-```bash
-tail -f ~/.foxclaw/logs/codex-app-server.log
-```
-
-Bridge logs are stored here:
-
-```bash
-tail -f ~/.foxclaw/logs/service.log
-```
-
-## Service Starts With The Wrong Node Version
-
-The systemd installer captures the `node` binary from your current PATH. If you installed the service from a shell using Node 22 or older, reinstall it from a Node 24 shell:
-
-```bash
-nvm use 24
-foxclaw start
-systemctl --user status foxclaw.service
-```
-
-The status output should show a Node 24 path in `ExecStart`.
-
-## Does It Run After Reboot?
-
-Linux user systemd:
-
-```bash
-systemctl --user is-enabled foxclaw.service
-```
-
-`enabled` means it starts with your user session. To start after reboot before login:
-
-```bash
-loginctl enable-linger "$USER"
-```
-
-macOS launchd starts FoxClaw when you log in after running:
-
-```bash
-foxclaw start
-```
-
-## Migrating From The Old Project Name
-
-If this machine still runs `telegram-codex-app-bridge`, migrate once:
-
-```bash
-systemctl --user disable --now telegram-codex-app-bridge.service 2>/dev/null || true
-test -e ~/.foxclaw || cp -a ~/.telegram-codex-app-bridge ~/.foxclaw
-npm install -g @foxden-app/foxclaw@latest
-foxclaw init
-foxclaw doctor
-foxclaw start
-```
-
-If `~/.foxclaw/.env` already exists, `foxclaw init` leaves it untouched.
+# Troubleshooting
+
+Start with these commands:
+
+```bash
+foxclaw doctor
+foxclaw status
+```
+
+If FoxClaw is installed as a Linux user service, also check:
+
+```bash
+systemctl --user status foxclaw.service
+journalctl --user -u foxclaw.service -f
+```
+
+## Doctor Failures
+
+| Symptom | Meaning | Fix |
+| --- | --- | --- |
+| `[FAIL] node >= 24` | Your current shell is using an older Node.js. | Run `nvm install 24 && nvm use 24`, then rerun `foxclaw doctor`. If the service uses old Node, reinstall it from a Node 24 shell with `foxclaw start`. |
+| `[FAIL] codex cli available` | The `codex` command is not in PATH. | Install Codex CLI or fix PATH, then confirm `codex --version` works. |
+| `[FAIL] telegram bot token configured` | `TG_BOT_TOKEN` is missing from `.env`. | Copy the token from `@BotFather` into `.env`. |
+| `[FAIL] telegram allowed user configured` | `TG_ALLOWED_USER_ID` is missing from `.env`. | Get your numeric id from `@userinfobot` and add it to `.env`. |
+| `[FAIL] default cwd exists` | `DEFAULT_CWD` points to a folder that does not exist. | Create the folder or change `DEFAULT_CWD` to an existing absolute path. |
+
+## Node Or npm Is Missing
+
+If you see `node: command not found` or `npm: command not found`, install Node.js 24 with `nvm`:
+
+```bash
+curl -o- https://raw.githubusercontent.com/nvm-sh/nvm/v0.40.3/install.sh | bash
+export NVM_DIR="$HOME/.nvm"
+[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
+nvm install 24
+nvm use 24
+node -v
+npm -v
+```
+
+If it still fails, close the terminal, open a new one, and run:
+
+```bash
+nvm use 24
+```
+
+## npm Permission Errors
+
+If `npm install -g @openai/codex` fails with `EACCES`, `EPERM`, or `permission denied`, your global npm directory is not writable by your user.
+
+Recommended fix: use Node through `nvm`, then install again:
+
+```bash
+nvm install 24
+nvm use 24
+npm install -g @openai/codex
+```
+
+Avoid `sudo npm install -g ...` unless you already understand how your Node installation is managed. Mixing `sudo`, system Node, and `nvm` is a common source of broken PATHs.
+
+If `codex` installs but FoxClaw still cannot find it, locate the binary:
+
+```bash
+command -v codex
+```
+
+Then put the absolute path in `.env`:
+
+```dotenv
+CODEX_CLI_BIN=/absolute/path/to/codex
+```
+
+## Bot Does Not Reply
+
+Check these in order:
+
+1. Make sure FoxClaw is running:
+
+   ```bash
+   foxclaw status
+   ```
+
+2. Try private chat first. Open your bot directly and send:
+
+   ```text
+   /help
+   ```
+
+3. Confirm `TG_ALLOWED_USER_ID` is your numeric Telegram id, not your `@username`.
+
+4. Confirm the bot token in `.env` belongs to the bot you are messaging.
+
+5. Restart after changing `.env`:
+
+   ```bash
+   foxclaw start
+   ```
+
+   If running foreground mode, stop with `Ctrl+C` and run `foxclaw serve` again.
+
+## Group Messages Do Not Work
+
+Private chat is the easiest mode. For groups and topics:
+
+1. Add the bot to the group.
+2. Disable the bot's `privacy mode` in `@BotFather`.
+3. Promote the bot to administrator.
+4. Remove and re-add the bot if privacy mode was changed after it joined.
+5. Configure `TG_ALLOWED_CHAT_ID`, and optionally `TG_ALLOWED_TOPIC_ID`.
+
+Explicit commands such as `/status@botname` can work even when normal group messages are blocked by privacy mode, so verify with a plain natural-language message too.
+
+## Get Group Or Topic IDs
+
+1. Stop FoxClaw.
+2. Send a new message in the target group or topic.
+3. Open:
+
+   ```text
+   https://api.telegram.org/bot<YOUR_BOT_TOKEN>/getUpdates
+   ```
+
+4. Use `message.chat.id` as `TG_ALLOWED_CHAT_ID`.
+5. Use `message.message_thread_id` as `TG_ALLOWED_TOPIC_ID`.
+
+If FoxClaw is still running, it may consume the update before you inspect it.
+
+## Telegram Polling Conflict
+
+If Telegram reports conflicts or the same bot behaves strangely, two processes may be polling the same bot token.
+
+Check old and new services:
+
+```bash
+systemctl --user is-active foxclaw.service
+systemctl --user is-active telegram-codex-app-bridge.service 2>/dev/null || true
+```
+
+Stop the old service:
+
+```bash
+systemctl --user disable --now telegram-codex-app-bridge.service
+```
+
+Then restart FoxClaw:
+
+```bash
+foxclaw start
+```
+
+## Codex Or App-Server Fails
+
+FoxClaw requires local Codex auth. Check:
+
+```bash
+codex --version
+```
+
+If Codex is not logged in:
+
+```bash
+codex login
+```
+
+`codex --version` only verifies the command exists. To verify auth, run:
+
+```bash
+codex
+```
+
+Then ask:
+
+```text
+Say ready and exit.
+```
+
+If your CLI supports `codex login status`, that is also useful, but a normal successful prompt is the most reliable check.
+
+FoxClaw app-server logs are stored here by default:
+
+```bash
+tail -f ~/.foxclaw/logs/codex-app-server.log
+```
+
+Bridge logs are stored here:
+
+```bash
+tail -f ~/.foxclaw/logs/service.log
+```
+
+## Service Starts With The Wrong Node Version
+
+The systemd installer captures the `node` binary from your current PATH. If you installed the service from a shell using Node 22 or older, reinstall it from a Node 24 shell:
+
+```bash
+nvm use 24
+foxclaw start
+systemctl --user status foxclaw.service
+```
+
+The status output should show a Node 24 path in `ExecStart`.
+
+## Does It Run After Reboot?
+
+Linux user systemd:
+
+```bash
+systemctl --user is-enabled foxclaw.service
+```
+
+`enabled` means it starts with your user session. To start after reboot before login:
+
+```bash
+loginctl enable-linger "$USER"
+```
+
+macOS launchd starts FoxClaw when you log in after running:
+
+```bash
+foxclaw start
+```
+
+## Migrating From The Old Project Name
+
+If this machine still runs `telegram-codex-app-bridge`, migrate once:
+
+```bash
+systemctl --user disable --now telegram-codex-app-bridge.service 2>/dev/null || true
+test -e ~/.foxclaw || cp -a ~/.telegram-codex-app-bridge ~/.foxclaw
+npm install -g @foxden-app/foxclaw@latest
+foxclaw init
+foxclaw doctor
+foxclaw start
+```
+
+If `~/.foxclaw/.env` already exists, `foxclaw init` leaves it untouched.

package/package.json

@@ -1,7 +1,6 @@
 {
   "name": "@foxden-app/foxclaw",
-  "version": "0.2.4",
-  "description": "Foxden local execution claw for controlling Codex from trusted chat interfaces.",
+  "version": "0.2.6",  "description": "Foxden local execution claw for controlling Codex from trusted chat interfaces.",
   "type": "module",
   "main": "dist/main.js",
   "bin": {

package/scripts/status.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
-set -euo pipefail
-ROOT_DIR="$(cd "$(dirname "$0")/.." && pwd)"
-node "$ROOT_DIR/dist/main.js" status
+#!/usr/bin/env bash
+set -euo pipefail
+ROOT_DIR="$(cd "$(dirname "$0")/.." && pwd)"
+node "$ROOT_DIR/dist/main.js" status

package/scripts/systemd/install.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
-set -euo pipefail
-ROOT_DIR="$(cd "$(dirname "$0")/../.." && pwd)"
-node "$ROOT_DIR/dist/main.js" install-systemd
+#!/usr/bin/env bash
+set -euo pipefail
+ROOT_DIR="$(cd "$(dirname "$0")/../.." && pwd)"
+node "$ROOT_DIR/dist/main.js" install-systemd

package/scripts/systemd/uninstall.sh

@@ -1,4 +1,4 @@
-#!/usr/bin/env bash
-set -euo pipefail
-ROOT_DIR="$(cd "$(dirname "$0")/../.." && pwd)"
-node "$ROOT_DIR/dist/main.js" uninstall-systemd
+#!/usr/bin/env bash
+set -euo pipefail
+ROOT_DIR="$(cd "$(dirname "$0")/../.." && pwd)"
+node "$ROOT_DIR/dist/main.js" uninstall-systemd