@fmsim/fmsim 0.0.98 → 0.0.99

package/dist-app/helps/scene/component/scenario-start.md

@@ -0,0 +1,16 @@
+# scenario start
+
+- Start the scenario with the given variables.
+- A new scenario is started only if there is no scenario instance with the same name currently being executed.
+- Values ​​given as variables(value attribute) are given as variables variables at the beginning of the scenario. When this value is changed or intent sensitive is set, this component is activated.
+
+## properties
+  - instance name: (optional value) The name of the scenario instance that is started with this name is maintained as the given instance name value.
+    If this name is provided as an instance name during scenario-stop, the scenario instance is terminated.
+    If this value is not set, the scenario name property value is used as the scenario instance name.
+    If a scenario instance with the same instance name already exists, a new scenario instance is not started.
+  - scenario-name: (required) Provide the scenario name. If the instance name is not specifically set, the scenario name becomes the instance name.
+  - variables: (optional value) Variable values ​​delivered to the scenario. This is a parameter value provided to the scenario. This property is connected to the value of this component.
+
+## data
+  - The status value of the scenario instance executed by scenario-start:'STARTED' | 'STOPPED' | 'HALTED'

package/dist-app/helps/scene/component/scenario-start.zh.md

@@ -0,0 +1,16 @@
+# scenario start
+
+- 使用给定的变量启动方案。
+- 仅当当前不存在具有相同名称的方案实例时，才启动新方案。
+- 如果提供variables发生变化时或设置意图敏感后，此组件将被激活。
+
+## properties
+  - instance name ：（可选）维护以该名称作为给定实例名称值启动的方案实例的名称。
+    如果在方案停止期间将此名称作为实例名称提供，则方案实例将终止。
+    如果未设置此值，那么方案名称属性值将用作方案实例名称。
+    如果已经存在具有相同实例名称的方案实例，则不会启动新的方案实例。
+  - scenario-name ：（必需）提供方案名称。如果未专门设置实例名称，则方案名称将成为实例名称。
+  - variables：（可选）传递给场景的变量值。这是提供给方案的参数值。此属性连接到该组件的值。
+
+## data
+  - 由方案开始执行的方案实例的状态值：'STARTED' | 'STOPPED' | 'HALTED'

package/dist-app/helps/scene/component/scenario-stop.ko.md

@@ -0,0 +1,12 @@
+# scenario stop
+
+- 시나리오를 종료시킨다.
+- 현재 실행중인 동일한 이름(instance name)의 시나리오 인스턴스를 찾아서 종료한다. 주어진 이름의 인스턴스가 없으면, 아무런 동작이 일어나지 않는다.
+- value : 아무런 값이 주어져도 되며, 데이터 바인딩에 의해서 value값이 설정될 때 컴포넌트가 동작한다.
+
+## properties
+  - instance name : (선택값) 이 이름으로 존재하는 시나리오 인스턴스를 종료시킨다. 이 값을 설정하지 않으면, scenario name 속성값을 사용한다. 이 값을 설정하지 않으면, scenario name 속성 값을 시나리오 인스턴스 이름으로 한다.
+  - scenario name : (선택값) instance name 과 scenario name 둘 중 하나는 입력되어야 한다.
+
+## data
+  - scenario-stop 으로 종료된 scenario instance 의 상태값 : 'STOPPED' | 'HALTED'

package/dist-app/helps/scene/component/scenario-stop.md

@@ -0,0 +1,12 @@
+# scenario stop
+
+- End the scenario.
+- Finds the currently running scenario instance with the same name and terminates it. If there is no instance of the given name, nothing happens.
+- value: Any value can be given, and the component operates when the value is set by data binding.
+
+## properties
+  - instance name: (optional value) Terminates the scenario instance that exists under this name. If this value is not set, the scenario name property value is used. If this value is not set, the scenario name property value is used as the scenario instance name.
+  - scenario name: (optional value) Either of the instance name and the scenario name must be entered.
+
+## data
+   - Status value of the scenario instance terminated with scenario-stop : 'STOPPED' | 'HALTED'

package/dist-app/helps/scene/component/scenario-stop.zh.md

@@ -0,0 +1,12 @@
+# scenario stop
+
+- 结束方案。
+- 查找具有相同名称的当前正在运行的方案实例并终止它。 如果没有给定名称的实例，则什么也不会发生。
+- value：可以指定任何值，并且通过数据绑定设置该值时，组件将运行。
+
+## properties
+   - instance name ：（可选值）终止以该名称存在的方案实例。 如果未设置此值，则使用方案名称属性值。 如果未设置此值，那么方案名称属性值将用作方案实例名称。
+   - 方案名称：（可选）必须输入实例名称和方案名称。
+
+## data
+   - 方案停止时方案实例的状态值： 'STOPPED' | 'HALTED'

package/dist-app/helps/scene/component/star.ko.md

@@ -0,0 +1,19 @@
+# star
+
+![컴포넌트-별][star-01]
+
+별 모양 도형
+
+- Category : Shape
+- 속성 :
+1. ratio(Number) - 도형의 두께를 조절  
+  ![별-ratio적용결과][star-02]
+2. wing(Number) - 날개의 개수를 조절  
+  ![별-wing적용결과][star-03]
+
+
+[star-01]: ../images/star-01.png
+
+[star-02]: ../images/star-02.png
+
+[star-03]: ../images/star-03.png

package/dist-app/helps/scene/component/star.md

@@ -0,0 +1,19 @@
+# star
+
+![Component-Star][star-01]
+
+The shape of star.
+
+- Category : Shape
+- Property :
+1. ratio(Number) - Adjust the thickness of shape.
+  ![Star-ratio application result][star-02]
+2. wing(Number) - Adjust the number of wing.
+  ![Star-wing application result][star-03]
+
+
+[star-01]: ../images/star-01.png
+
+[star-02]: ../images/star-02.png
+
+[star-03]: ../images/star-03.png

package/dist-app/helps/scene/component/star.zh.md

@@ -0,0 +1,19 @@
+# 星
+
+![组件-星][star-01]
+
+星形
+
+- 类型：形状
+- 属性：
+1. ratio(Number) - 调整形状的厚度。
+  ![星-ratio适用结果][star-02]
+2. wing(Number) - 调整翼数。
+  ![星-wing适用结果][star-03]
+
+
+[star-01]: ../images/star-01.png
+
+[star-02]: ../images/star-02.png
+
+[star-03]: ../images/star-03.png

package/dist-app/helps/scene/component/text.ko.md

@@ -0,0 +1,9 @@
+# Text
+
+![Text][Text-01]  
+텍스트 상자
+
+
+- Category : Text
+
+[Text-01]: ../images/text-01.png

package/dist-app/helps/scene/component/text.md

@@ -0,0 +1,9 @@
+# Text
+
+![Text][Text-01]  
+Text box
+
+
+- Category : Text
+
+[Text-01]: ../images/text-01.png

package/dist-app/helps/scene/component/text.zh.md

@@ -0,0 +1,9 @@
+# 文本框
+
+![Text][Text-01]  
+文本框
+
+
+- 类型：文本
+
+[Text-01]: ../images/text-01.png

package/dist-app/helps/scene/component/top-rounded-ractangle.ko.md

@@ -0,0 +1,15 @@
+# 둥근 사각형
+
+![Half-Round-Rect][half-round-rect-01]
+
+위쪽 모퉁이가 둥근 사각형
+
+- Category : Shape
+- 속성 :
+1. round(Number) - 위쪽 모퉁이를 둥글게 적용
+![Half-Round-Rect-Round-Result][half-round-rect-02]
+
+
+[half-round-rect-01]: ../images/half-round-rect-01.png
+
+[half-round-rect-02]: ../images/half-round-rect-02.png

package/dist-app/helps/scene/component/top-rounded-ractangle.md

@@ -0,0 +1,15 @@
+# half round rectangle
+
+![Half-Round-Rect][half-round-rect-01]
+
+A rectangle of which top edge is rounded.
+
+- Category : Shape
+- Property :
+1. round(Number) - Round the top edge.
+![Half-Round-Rect-Round-Result][half-round-rect-02]
+
+
+[half-round-rect-01]: ../images/half-round-rect-01.png
+
+[half-round-rect-02]: ../images/half-round-rect-02.png

package/dist-app/helps/scene/component/top-rounded-ractangle.zh.md

@@ -0,0 +1,15 @@
+# 半圆矩形
+
+![Half-Round-Rect][half-round-rect-01]
+
+顶部是圆角的四角形。
+
+- 类型：形状
+- 属性：
+1. round(Number) - 圆角的顶边。
+![Half-Round-Rect-Round-Result][half-round-rect-02]
+
+
+[half-round-rect-01]: ../images/half-round-rect-01.png
+
+[half-round-rect-02]: ../images/half-round-rect-02.png

package/dist-app/helps/scene/component/triangle.ko.md

@@ -0,0 +1,9 @@
+# 삼각형
+
+![컴포넌트-삼각형][triangle-01]
+
+삼각형
+
+- Category : Shape
+
+[triangle-01]: ../images/triangle-01.png

package/dist-app/helps/scene/component/triangle.md

@@ -0,0 +1,9 @@
+# triangle
+
+![Component-Triangle][triangle-01]
+
+Triangle
+
+- Category : Shape
+
+[triangle-01]: ../images/triangle-01.png

package/dist-app/helps/scene/component/triangle.zh.md

@@ -0,0 +1,9 @@
+# 三角形
+
+![组件-三角形][triangle-01]
+
+三角形
+
+- 类型：形状
+
+[triangle-01]: ../images/triangle-01.png

package/dist-app/helps/setting/secure-ip-list.ja.md

@@ -0,0 +1,21 @@
+# セキュア IP リスト (Secure IP List)
+
+セキュア IP リストは、クライアントのセキュリティ IP アドレスを管理し、アクセス権を制御するためのシステムで、以下の主な機能を提供します：
+
+1. **ブラックリスト (Blacklist)**: 違法または悪意のある活動を行う IP アドレスをブロックするために使用されます。
+
+   - ブロックしたい単一の IP または正規表現で IP 範囲をカンマで区切って設定できます。
+   - 例：127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - ローカルホストに::1, ::ffff:127.0.0.1, 127.0.0.1 をすべて使用すると、IPV6 と IPV4 のアドレス体系をサポートできます。
+
+2. **ホワイトリスト (Whitelist)**: 信頼できる IP アドレスのリストを設定し、許可された IP アドレスのみがアクセスできるようにします。（ホワイトリスト機能はまだサポートされていません。）
+
+   - 信頼できる単一の IP または正規表現で IP 範囲をカンマで区切って設定できます。
+   - 例：127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - ローカルホストに::1, ::ffff:127.0.0.1, 127.0.0.1 をすべて使用すると、IPV6 と IPV4 のアドレス体系をサポートできます。
+
+3. **特別権限 (Protected IP List)**: 特定の IP アドレス以外では保護された権限を使用できないように制限するために使用されます。
+
+   - 権限が許可された単一の IP または正規表現で IP 範囲をカンマで区切って設定できます。
+   - 例：127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - ローカルホストに::1, ::ffff:127.0.0.1, 127.0.0.1 をすべて使用すると、IPV6 と IPV4 のアドレス体系をサポートできます。

package/dist-app/helps/setting/secure-ip-list.ko.md

@@ -0,0 +1,21 @@
+# 보안 IP 리스트 (Secure IP List)
+
+보안 IP 리스트(Secure IP List)는 클라이언트의 보안 IP 주소를 관리하고, 접근 권한을 제어하기 위한 시스템으로, 다음과 같은 주요 기능을 제공합니다:
+
+1. 블랙리스트 (Blacklist): 불법적인 또는 악의적인 활동을 하는 IP 주소를 차단하는 데 사용됩니다.
+
+- 차단하고자 하는 단일 IP 또는 정규표현식으로 IP 대역을 코마로 구분하여 설정할 수 있습니다.
+- 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+- 로컬호스트는 ::1, ::ffff:127.0.0.1, 127.0.0.1 을 모두 사용하면, IPV6와 IPV4 주소체계를 모두 지원할 수 있습니다.
+
+2. 화이트리스트 (Whitelist): 신뢰할 수 있는 IP 주소 목록을 설정하여 허용되는 IP 주소만 접근할 수 있도록 하는 데 사용됩니다.(화이트리스트 기능은 아직 지원하지 않습니다.)
+
+- 신뢰할 수 있는 단일 IP 또는 정규표현식으로 IP 대역을 코마로 구분하여 설정할 수 있습니다.
+- 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+- 로컬호스트는 ::1, ::ffff:127.0.0.1, 127.0.0.1 을 모두 사용하면, IPV6와 IPV4 주소체계를 모두 지원할 수 있습니다.
+
+3. 특별한 권한 (Protected IP List): 특정 IP 주소외에서는 보호되는 권한을 사용할 수 없도록 제한하는데 사용됩니다.
+
+- 권한이 허가된 단일 IP 또는 정규표현식으로 IP 대역을 코마로 구분하여 설정할 수 있습니다.
+- 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+- 로컬호스트는 ::1, ::ffff:127.0.0.1, 127.0.0.1 을 모두 사용하면, IPV6와 IPV4 주소체계를 모두 지원할 수 있습니다.

package/dist-app/helps/setting/secure-ip-list.md

@@ -0,0 +1,21 @@
+# Secure IP List
+
+The Secure IP List is a system for managing the security IP addresses of clients and controlling access permissions. It offers the following main features:
+
+1. **Blacklist**: Used to block IP addresses that engage in illegal or malicious activities.
+
+   - You can set up to block specific single IPs or use regular expressions to define an IP range, separated by commas.
+   - Examples: 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - To support both IPV6 and IPV4 address systems, use localhost addresses like ::1, ::ffff:127.0.0.1, and 127.0.0.1.
+
+2. **Whitelist**: Used to set a list of trusted IP addresses, allowing access only to these IPs. (The whitelist feature is not supported yet.)
+
+   - Trusted single IPs or regular expressions defining an IP range can be set, separated by commas.
+   - Examples: 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - Similar to the blacklist, using localhost addresses like ::1, ::ffff:127.0.0.1, and 127.0.0.1 supports both IPV6 and IPV4.
+
+3. **Protected IP List**: Used to restrict the use of protected privileges to specific IP addresses only.
+
+   - Permissions can be set for specific single IPs or using regular expressions to define an IP range, separated by commas.
+   - Examples: 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - By using localhost addresses such as ::1, ::ffff:127.0.0.1, and 127.0.0.1, both IPV6 and IPV4 address systems are supported.

package/dist-app/helps/setting/secure-ip-list.ms.md

@@ -0,0 +1,21 @@
+# Senarai IP Selamat (Secure IP List)
+
+Senarai IP Selamat adalah sistem untuk menguruskan alamat IP keselamatan klien dan mengawal kebenaran akses, menyediakan ciri-ciri utama berikut:
+
+1. **Senarai Hitam (Blacklist)**: Digunakan untuk menyekat alamat IP yang melakukan aktiviti haram atau jahat.
+
+   - Anda boleh menetapkan julat IP yang ingin disekat menggunakan IP tunggal atau ungkapan biasa, dipisahkan dengan koma.
+   - Contoh: 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - Jika menggunakan ::1, ::ffff:127.0.0.1, 127.0.0.1 untuk localhost, sistem dapat menyokong kedua-dua alamat IPV6 dan IPV4.
+
+2. **Senarai Putih (Whitelist)**: Menetapkan senarai alamat IP yang boleh dipercayai, membenarkan hanya alamat IP yang dibenarkan untuk mengakses. (Ciri senarai putih belum disokong lagi.)
+
+   - Anda boleh menetapkan julat IP yang dipercayai menggunakan IP tunggal atau ungkapan biasa, dipisahkan dengan koma.
+   - Contoh: 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - Jika menggunakan ::1, ::ffff:127.0.0.1, 127.0.0.1 untuk localhost, sistem dapat menyokong kedua-dua alamat IPV6 dan IPV4.
+
+3. **Senarai IP Terlindung (Protected IP List)**: Digunakan untuk menghadkan penggunaan keistimewaan terlindung hanya kepada alamat IP tertentu.
+
+   - Anda boleh menetapkan julat IP yang diberikan kebenaran menggunakan IP tunggal atau ungkapan biasa, dipisahkan dengan koma.
+   - Contoh: 127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - Jika menggunakan ::1, ::ffff:127.0.0.1, 127.0.0.1 untuk localhost, sistem dapat menyokong kedua-dua alamat IPV6 dan IPV4.

package/dist-app/helps/setting/secure-ip-list.zh.md

@@ -0,0 +1,21 @@
+# 安全 IP 列表 (Secure IP List)
+
+安全 IP 列表是用于管理客户端安全 IP 地址和控制访问权限的系统，提供以下主要功能：
+
+1. **黑名单 (Blacklist)**: 用于阻止进行非法或恶意活动的 IP 地址。
+
+   - 可以使用逗号分隔的单个 IP 或正则表达式来设置要阻止的 IP 范围。
+   - 例如：127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - 使用::1, ::ffff:127.0.0.1, 127.0.0.1 作为本地主机，可以支持 IPV6 和 IPV4 地址系统。
+
+2. **白名单 (Whitelist)**: 设置可信 IP 地址列表，只允许这些地址访问。（当前不支持白名单功能。）
+
+   - 可以使用逗号分隔的单个 IP 或正则表达式来设置信任的 IP 范围。
+   - 例如：127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - 使用::1, ::ffff:127.0.0.1, 127.0.0.1 作为本地主机，可以支持 IPV6 和 IPV4 地址系统。
+
+3. **特殊权限 (Protected IP List)**: 限制只有特定 IP 地址才能使用受保护的权限。
+
+   - 可以使用逗号分隔的单个 IP 或正则表达式来设置授权的 IP 范围。
+   - 例如：127.0.0.1, 127.0.0.\*, 8.8.8.[0-3]
+   - 使用::1, ::ffff:127.0.0.1, 127.0.0.1 作为本地主机，可以支持 IPV6 和 IPV4 地址系统。

package/dist-app/helps/shell/attribute.md

@@ -0,0 +1,160 @@
+# Attribute
+
+Paragraphs are separated by a blank line.
+
+2nd paragraph. _Italic_, **bold**, and `monospace`. Itemized lists
+look like:
+
+- this one
+- that one
+- the other one
+
+Note that --- not considering the asterisk --- the actual text
+content starts at 4-columns in.
+
+> Block quotes are
+> written like so.
+>
+> They can span multiple paragraphs,
+> if you like.
+
+Use 3 dashes for an em-dash. Use 2 dashes for ranges (ex., "it's all
+in chapters 12--14"). Three dots ... will be converted to an ellipsis.
+Unicode is supported. ☺
+
+## An h2 header
+
+Here's a numbered list:
+
+1. first item
+2. second item
+3. third item
+
+Note again how the actual text starts at 4 columns in (4 characters
+from the left side). Here's a code sample:
+
+# Let me re-iterate ...
+
+for i in 1 .. 10 { do-something(i) }
+
+As you probably guessed, indented 4 spaces. By the way, instead of
+indenting the block, you can use delimited blocks, if you like:
+
+```
+define foobar() {
+print "Welcome to flavor country!";
+}
+```
+
+(which makes copying & pasting easier). You can optionally mark the
+delimited block for Pandoc to syntax highlight it:
+
+```python
+import time
+# Quick, count to ten!
+for i in range(10):
+# (but not *too* quick)
+time.sleep(0.5)
+print(i)
+```
+
+### An h3 header
+
+Now a nested list:
+
+1. First, get these ingredients:
+
+- carrots
+- celery
+- lentils
+
+2. Boil some water.
+
+3. Dump everything in the pot and follow
+   this algorithm:
+
+find wooden spoon
+uncover pot
+stir
+cover pot
+balance wooden spoon precariously on pot handle
+wait 10 minutes
+goto first step (or shut off burner when done)
+
+Do not bump wooden spoon or it will fall.
+
+Notice again how text always lines up on 4-space indents (including
+that last line which continues item 3 above).
+
+Here's a link to [a website](http://foo.bar), to a [local
+doc](local-doc.html), and to a [section heading in the current
+doc](#an-h2-header). Here's a footnote [^1].
+
+[^1]: Some footnote text.
+
+Tables can look like this:
+
+Name Size Material Color
+
+---
+
+All Business 9 leather brown
+Roundabout 10 hemp canvas natural
+Cinderella 11 glass transparent
+
+Table: Shoes sizes, materials, and colors.
+
+(The above is the caption for the table.) Pandoc also supports
+multi-line tables:
+
+---
+
+Keyword Text
+
+---
+
+red Sunsets, apples, and
+other red or reddish
+things.
+
+green Leaves, grass, frogs
+and other things it's
+not easy being.
+
+---
+
+A horizontal rule follows.
+
+---
+
+Here's a definition list:
+
+apples
+: Good for making applesauce.
+
+oranges
+: Citrus!
+
+tomatoes
+: There's no "e" in tomatoe.
+
+Again, text is indented 4 spaces. (Put a blank line between each
+term and its definition to spread things out more.)
+
+Here's a "line block" (note how whitespace is honored):
+
+| Line one
+| Line too
+| Line tree
+
+and images can be specified like so:
+
+![example image](example-image.jpg 'An exemplary image')
+
+Inline math equation: $\omega = d\phi / dt$. Display
+math should get its own line like so:
+
+$$I = \int \rho R^{2} dV$$
+
+And note that you can backslash-escape any punctuation characters
+which you wish to be displayed literally, ex.: \`foo\`, \*bar\*, etc.

package/dist-app/index.html

@@ -0,0 +1,14 @@
+<!doctype html><html lang="en"><head><meta charset="utf-8"/><title>Fmsim</title><meta name="generator" content="Things Factory Starter Kit"/><meta name="viewport" content="width=device-width,initial-scale=1,maximum-scale=1,user-scalable=no"/><meta name="description" content="Factory Layout View"/><base href="/"/><link rel="icon" href="/assets/favicon.ico"/><link rel="manifest" href="/assets/manifest.json"/><meta name="theme-color" content="#ea6780"/><meta name="mobile-web-app-capable" content="yes"/><meta name="application-name" content="Fmsim"/><meta name="application-description" content="Factory Layout View"/><meta name="application-copyright" content="Copyright © hatiolab.com. All Rights Reserved."/><link rel="application-icon" href="/assets/manifest/icon-96x96.png"/><meta name="apple-mobile-web-app-capable" content="yes"/><meta name="apple-mobile-web-app-status-bar-style" content="default"/><meta name="apple-mobile-web-app-title" content="Fmsim"/><link rel="apple-touch-icon" href="/assets/manifest/icon-48x48.png"/><link rel="apple-touch-icon" sizes="72x72" href="/assets/manifest/icon-72x72.png"/><link rel="apple-touch-icon" sizes="96x96" href="/assets/manifest/icon-96x96.png"/><link rel="apple-touch-icon" sizes="144x144" href="/assets/manifest/icon-144x144.png"/><link rel="apple-touch-icon" sizes="192x192" href="/assets/manifest/icon-192x192.png"/><meta name="msapplication-TileImage" content="/assets/manifest/icon-144x144.png"/><meta name="msapplication-TileColor" content="#ea6780"/><meta name="msapplication-tap-highlight" content="no"/><meta name="twitter:card" content="summary"/><meta name="twitter:site" content="@username"/><meta property="og:type" content="website"/><meta property="og:site_name" content="Fmsim, Factory Layout View."/><meta property="og:image" content="/assets/manifest/image-metaog.png"/><link href="/fmsim/node_modules/@material-design-icons/font/index.css" rel="stylesheet"/><link href="/fmsim/node_modules/@fontsource/roboto/index.css" rel="stylesheet"/><style>body {
+        margin: 0;
+        padding: 0;
+        overflow: hidden;
+
+        /* This is a font-stack that tries to use the system-default sans-serifs first */
+        font-family: Helvetica, Arial, sans-serif, 'Apple Color Emoji', 'Segoe UI Emoji', 'Segoe UI Symbol';
+        line-height: 1.5;
+        -webkit-font-smoothing: antialiased;
+      }</style><script>if ('serviceWorker' in navigator) {
+        navigator.serviceWorker.register('/service-worker.js', {
+          scope: '/'
+        })
+      }</script><script defer="defer" src="/fmsim/main.js"></script><script defer="defer" src="/fmsim/theme.js"></script><link href="/fmsim/theme.css" rel="stylesheet"></head><body><things-app context-path-prefix="mcs"></things-app><noscript>Please enable JavaScript to view this website.</noscript><script src="/fmsim/node_modules/@webcomponents/webcomponentsjs/webcomponents-loader.js"></script><script src="/fmsim/node_modules/web-animations-js/web-animations-next.min.js"></script><script src="/fmsim/node_modules/@hatiolab/things-scene/things-scene-min.js"></script></body></html>