@fitlab-ai/agent-infra 0.8.3 → 0.8.5

package/templates/.agents/skills/commit/SKILL.en.md

@@ -61,9 +61,11 @@ Review status, diff, and recent history, then prepare a Conventional Commit with
 Stage specific files only and run `git commit` with the prepared message.
 
 If this commit is associated with a task and a `review-code` artifact exists, read the highest-round `review-code` artifact before committing:
-- If that artifact's `Overall Verdict` / `总体结论` is Approved, parse `Review Baseline Commit` / `审查基线提交` as `R`, and `Reviewed Diff Fingerprint` / `审查差异指纹` as `F`
-- After staging the explicit files, run `node .agents/scripts/review-diff-fingerprint.js staged <R>` to get `S`, and record `pre_head=$(git rev-parse HEAD)`
-- After committing, write `last_reviewed_commit: <new_head>` to task.md frontmatter only when `pre_head == R` and `S == F`; otherwise do not advance that field
+- If that artifact's `Overall Verdict` / `总体结论` is Approved, parse `R`, `F`, and `Reviewed Snapshot Tree` / `审查快照树` (`T`)
+- After staging the explicit files, record `pre_head=$(git rev-parse HEAD)` and use the helper's JSON mode to generate the complete worktree tree `W` and normalized staged tree `S`
+- Before `git commit`, require `pre_head == R && W == T && S == T`; use the helper's `compare` mode to produce added, missing, and different diagnostics for both worktree and staged snapshots
+- If any condition fails, enter Scenario 4 in `reference/task-status-update.md`; do not run `git commit`, push, successful state updates, PR summary sync, or the completion gate
+- After all comparisons match and the commit succeeds, write `last_reviewed_commit: <new_head>` to task.md frontmatter
 - Do not scan backward to earlier Approved artifacts; the highest-round `review-code` artifact is the only authoritative source
 
 ## 5. Push to the Existing PR When Applicable
@@ -91,7 +93,7 @@ Fold the push outcome (pushed / skipped(no PR) / failed) into the next step's "U
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 > The full four-case status matrix, prerequisite checks, and multi-TUI next-step commands live in `reference/task-status-update.md`. Read `reference/task-status-update.md` before updating task state.

package/templates/.agents/skills/commit/SKILL.zh-CN.md

@@ -61,9 +61,11 @@ git diff
 只暂存明确列出的文件，然后执行 `git commit`。
 
 如果本次提交关联任务且存在 `review-code` 产物，在提交前读取最高轮 `review-code` 产物：
-- 若该产物 `总体结论` / `Overall Verdict` 为 Approved，解析 `审查基线提交` / `Review Baseline Commit` 为 `R`，解析 `审查差异指纹` / `Reviewed Diff Fingerprint` 为 `F`
-- 暂存明确文件后运行 `node .agents/scripts/review-diff-fingerprint.js staged <R>` 得到 `S`，并记录 `pre_head=$(git rev-parse HEAD)`
-- 提交后仅当 `pre_head == R` 且 `S == F` 时，在 task.md frontmatter 写入 `last_reviewed_commit: <new_head>`；否则不推进该字段
+- 若该产物 `总体结论` / `Overall Verdict` 为 Approved，解析 `R`、`F` 与 `审查快照树` / `Reviewed Snapshot Tree`（`T`）
+- 暂存明确文件后记录 `pre_head=$(git rev-parse HEAD)`，并以 helper 的 JSON 模式生成当前完整工作区树 `W` 与规范化暂存树 `S`
+- 在 `git commit` 前要求 `pre_head == R && W == T && S == T`；分别运行 helper 的 `compare` 模式生成 worktree/staged 的 added、missing、different 路径诊断
+- 任一条件不满足时进入 `reference/task-status-update.md` 的“场景 4：提交前快照阻断”，不得执行 `git commit`、push、成功状态更新、PR 摘要同步或完成 gate
+- 全部相等并成功提交后，在 task.md frontmatter 写入 `last_reviewed_commit: <new_head>`
 - 不向后扫描更早的 Approved 产物；最高轮 `review-code` 产物是唯一权威来源
 
 ## 5. 推送到已有 PR（按需）
@@ -91,7 +93,7 @@ c. 安全降级（不阻塞已完成的 `git commit`，仅提示用户）：
 获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 > 完整的 4 种状态分支、前置条件检查和多 TUI 下一步命令见 `reference/task-status-update.md`。更新任务状态前，先读取 `reference/task-status-update.md`。

package/templates/.agents/skills/commit/reference/task-status-update.en.md

@@ -9,7 +9,7 @@ Before updating task metadata, read `.agents/rules/version-stamp.md` and refresh
 Get the current time first:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 For every task-related commit, append this Activity Log entry in `task.md`:
@@ -18,13 +18,40 @@ For every task-related commit, append this Activity Log entry in `task.md`:
 - {YYYY-MM-DD HH:mm:ss±HH:MM} — **Commit** by {agent} — {commit hash short} {commit subject}
 ```
 
-If the commit stage confirmed that the highest-round `review-code` artifact is Approved, `pre_head` equals its review baseline commit `R`, and the staged diff fingerprint `S` equals its reviewed diff fingerprint `F`, also write or refresh:
+If the commit stage confirmed that the highest-round `review-code` artifact is Approved, `pre_head == R`, complete worktree tree `W == T`, and normalized staged tree `S == T`, also write or refresh after a successful commit:
 
 ```yaml
 last_reviewed_commit: {new_head}
 ```
 
-This field is the preferred baseline for the `complete-task` `post-review-commit` gate. When any condition is not met, do not write or advance it.
+This field is the only baseline for the `complete-task` `post-review-commit` gate. When any condition is not met, do not write or advance it.
+
+### Scenario 4: pre-commit snapshot block
+
+This scenario ends the run before `git commit` and does not enter the successful post-commit scenario selection below. When any of `pre_head != R`, `W != T`, or `S != T` applies:
+
+- Do not run `git commit`, push, successful state updates, Issue/PR success sync, or the commit completion gate; preserve the current worktree and index.
+- Refresh task `updated_at`, `assigned_to`, and `agent_infra_version`, then append a done log with action `Commit`: `Blocked before git commit: reviewed snapshot mismatch (worktree added={a}, missing={m}, different={d}; staged added={a}, missing={m}, different={d})`.
+- User output must include `No commit was created.` and show Added/Missing/Different under both `Current worktree vs reviewed snapshot` and `Staged snapshot vs reviewed snapshot`; render an empty set as `- (none)` and list paths only in user output.
+- When `pre_head != R` or `W != T`, the only next step is a fresh `review-code`; when only `W == T && S != T`, tell the user to fix staging and rerun `commit` without re-review.
+
+Full re-review commands:
+
+```text
+Next step - re-run code review:
+  - Claude Code / OpenCode: /review-code {task-ref}
+  - Gemini CLI: /{{project}}:review-code {task-ref}
+  - Codex CLI: $review-code {task-ref}
+```
+
+Full staging-only retry commands:
+
+```text
+Next step - fix staging and retry commit:
+  - Claude Code / OpenCode: /commit {task-ref}
+  - Gemini CLI: /{{project}}:commit {task-ref}
+  - Codex CLI: $commit {task-ref}
+```
 
 Before selecting the next step, verify:
 - `current_step` and the latest workflow progress in `task.md`
@@ -60,7 +87,7 @@ Required next-step commands (rendered by `prFlow`):
 ```text
 Next step - complete and archive the task:
   - Claude Code / OpenCode: /complete-task {task-ref}
-  - Gemini CLI: /agent-infra:complete-task {task-ref}
+  - Gemini CLI: /{{project}}:complete-task {task-ref}
   - Codex CLI: $complete-task {task-ref}
 ```
 
@@ -69,7 +96,7 @@ Next step - complete and archive the task:
 ```text
 Next step - create Pull Request:
   - Claude Code / OpenCode: /create-pr {task-ref}
-  - Gemini CLI: /agent-infra:create-pr {task-ref}
+  - Gemini CLI: /{{project}}:create-pr {task-ref}
   - Codex CLI: $create-pr {task-ref}
 ```
 
@@ -79,11 +106,11 @@ field absent -> two options:
 Next step - choose one:
   - Go through the PR flow:
     - Claude Code / OpenCode: /create-pr {task-ref}
-    - Gemini CLI: /agent-infra:create-pr {task-ref}
+    - Gemini CLI: /{{project}}:create-pr {task-ref}
     - Codex CLI: $create-pr {task-ref}
   - Complete directly (no PR):
     - Claude Code / OpenCode: /complete-task {task-ref}
-    - Gemini CLI: /agent-infra:complete-task {task-ref}
+    - Gemini CLI: /{{project}}:complete-task {task-ref}
     - Codex CLI: $complete-task {task-ref}
 ```
 
@@ -108,7 +135,7 @@ Required next-step commands:
 ```text
 Next step - code review:
   - Claude Code / OpenCode: /review-code {task-ref}
-  - Gemini CLI: /agent-infra:review-code {task-ref}
+  - Gemini CLI: /{{project}}:review-code {task-ref}
   - Codex CLI: $review-code {task-ref}
 ```
 

package/templates/.agents/skills/commit/reference/task-status-update.zh-CN.md

@@ -9,7 +9,7 @@
 先获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 对于每一次与任务相关的提交，都要在 `task.md` 中追加以下 Activity Log：
@@ -18,13 +18,40 @@ date "+%Y-%m-%d %H:%M:%S%:z"
 - {YYYY-MM-DD HH:mm:ss±HH:MM} — **Commit** by {agent} — {commit hash short} {commit subject}
 ```
 
-如果提交阶段已确认最高轮 `review-code` 产物 Approved、`pre_head` 等于其审查基线提交 `R`、且 staged 差异指纹 `S` 等于其审查差异指纹 `F`，同时写入或刷新：
+如果提交阶段已确认最高轮 `review-code` 产物 Approved、`pre_head == R`、完整工作区树 `W == T` 且规范化暂存树 `S == T`，成功提交后同时写入或刷新：
 
 ```yaml
 last_reviewed_commit: {new_head}
 ```
 
-该字段是 `complete-task` 的 `post-review-commit` gate 优先 baseline。条件不满足时不要写入或推进该字段。
+该字段是 `complete-task` 的 `post-review-commit` gate 唯一 baseline。条件不满足时不要写入或推进该字段。
+
+### 场景 4：提交前快照阻断
+
+此场景在 `git commit` 前终止本轮，不进入下方提交成功后的场景选择。任一 `pre_head != R`、`W != T` 或 `S != T` 命中时：
+
+- 不执行 `git commit`、push、成功状态更新、Issue/PR 成功同步或 commit 完成 gate；保留当前工作区与暂存区。
+- 刷新任务的 `updated_at`、`assigned_to`、`agent_infra_version`，并以 action `Commit` 追加 done 日志：`Blocked before git commit: reviewed snapshot mismatch (worktree added={a}, missing={m}, different={d}; staged added={a}, missing={m}, different={d})`。
+- 用户输出必须包含 `No commit was created.`，并分别按 `Current worktree vs reviewed snapshot`、`Staged snapshot vs reviewed snapshot` 展示 Added/Missing/Different；空集合显示 `- (none)`，路径只在用户输出中逐行展示。
+- `pre_head != R` 或 `W != T` 时，下一步只指向重新 `review-code`；仅 `W == T && S != T` 时，提示修正暂存后重跑 `commit`，无需重审。
+
+重新审查的完整命令：
+
+```text
+下一步 - 重新代码审查：
+  - Claude Code / OpenCode: /review-code {task-ref}
+  - Gemini CLI: /{{project}}:review-code {task-ref}
+  - Codex CLI: $review-code {task-ref}
+```
+
+仅修正暂存的完整命令：
+
+```text
+下一步 - 修正暂存后重新提交：
+  - Claude Code / OpenCode: /commit {task-ref}
+  - Gemini CLI: /{{project}}:commit {task-ref}
+  - Codex CLI: $commit {task-ref}
+```
 
 在决定下一步之前，先确认：
 - `task.md` 中的 `current_step` 和最新工作流进度
@@ -60,7 +87,7 @@ last_reviewed_commit: {new_head}
 ```text
 下一步 - 完成并归档任务：
   - Claude Code / OpenCode: /complete-task {task-ref}
-  - Gemini CLI: /agent-infra:complete-task {task-ref}
+  - Gemini CLI: /{{project}}:complete-task {task-ref}
   - Codex CLI: $complete-task {task-ref}
 ```
 
@@ -69,7 +96,7 @@ last_reviewed_commit: {new_head}
 ```text
 下一步 - 创建 Pull Request：
   - Claude Code / OpenCode: /create-pr {task-ref}
-  - Gemini CLI: /agent-infra:create-pr {task-ref}
+  - Gemini CLI: /{{project}}:create-pr {task-ref}
   - Codex CLI: $create-pr {task-ref}
 ```
 
@@ -79,11 +106,11 @@ last_reviewed_commit: {new_head}
 下一步 - 二选一：
   - 走 PR 流程：
     - Claude Code / OpenCode: /create-pr {task-ref}
-    - Gemini CLI: /agent-infra:create-pr {task-ref}
+    - Gemini CLI: /{{project}}:create-pr {task-ref}
     - Codex CLI: $create-pr {task-ref}
   - 直接完成（无 PR）：
     - Claude Code / OpenCode: /complete-task {task-ref}
-    - Gemini CLI: /agent-infra:complete-task {task-ref}
+    - Gemini CLI: /{{project}}:complete-task {task-ref}
     - Codex CLI: $complete-task {task-ref}
 ```
 
@@ -108,7 +135,7 @@ last_reviewed_commit: {new_head}
 ```text
 下一步 - 代码审查：
   - Claude Code / OpenCode: /review-code {task-ref}
-  - Gemini CLI: /agent-infra:review-code {task-ref}
+  - Gemini CLI: /{{project}}:review-code {task-ref}
   - Codex CLI: $review-code {task-ref}
 ```
 

package/templates/.agents/skills/complete-manual-validation/SKILL.en.md

@@ -82,14 +82,19 @@ Follow `reference/summary-update.md` to resolve the PR number, find the `sync-pr
 
 ### 5. Create the Manual Validation Artifact
 
-Before this step, read `reference/report-template.md`. Create `{manual-validation-artifact}` with state check, validation verdict, validation scope, validation details, and PR summary sync result.
+Before this step, read `reference/report-template.md`. Create `{manual-validation-artifact}` and record:
+- State check
+- Validation verdict
+- Validation scope
+- Validation details
+- PR summary sync result
 
 ### 6. Update task.md
 
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 Update `.agents/workspace/active/{task-id}/task.md`:
@@ -113,6 +118,25 @@ Run:
 node .agents/scripts/validate-artifact.js gate complete-manual-validation .agents/workspace/active/{task-id} {manual-validation-artifact} --format text
 ```
 
+Handle the result:
+- Exit code 0 -> tell the user
+- Exit code 1 -> fix the reported problem and rerun
+- Exit code 2 -> stop and report that manual intervention is required
+
 ### 8. Tell the User
 
-Report the artifact path, PR summary sync result, and verification output. Before rendering the final output, read `.agents/rules/next-step-output.md` and append `Completed at: YYYY-MM-DD HH:mm:ss` as the absolute last line.
+Report:
+- Artifact path
+- PR summary sync result
+- Current verification output
+- Suggested next step: continue with `commit` / `create-pr`, or enter the final review flow
+
+Before rendering the final output, read `.agents/rules/next-step-output.md` and append `Completed at: YYYY-MM-DD HH:mm:ss` as the absolute last line.
+
+## Completion Checklist
+
+- [ ] Read `reference/summary-update.md`
+- [ ] Created the manual validation artifact
+- [ ] Updated the same PR summary comment, or stopped according to failure semantics
+- [ ] Updated task.md and appended the Activity Log
+- [ ] Ran the verification gate

package/templates/.agents/skills/complete-manual-validation/SKILL.zh-CN.md

@@ -82,14 +82,19 @@ complete-manual-validation {task-ref} [{pr-ref}] {verification-summary}
 
 ### 5. 创建人工验证产物
 
-执行此步骤前，先读取 `reference/report-template.md`。创建 `{manual-validation-artifact}`，记录状态核对、验证结论、验证范围、验证详情和 PR 摘要同步结果。
+执行此步骤前，先读取 `reference/report-template.md`。创建 `{manual-validation-artifact}`，记录：
+- 状态核对
+- 验证结论
+- 验证范围
+- 验证详情
+- PR 摘要同步结果
 
 ### 6. 更新 task.md
 
 获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 更新 `.agents/workspace/active/{task-id}/task.md`：
@@ -113,6 +118,25 @@ date "+%Y-%m-%d %H:%M:%S%:z"
 node .agents/scripts/validate-artifact.js gate complete-manual-validation .agents/workspace/active/{task-id} {manual-validation-artifact} --format text
 ```
 
+处理结果：
+- 退出码 0 -> 告知用户
+- 退出码 1 -> 修复问题后重新运行
+- 退出码 2 -> 停止并告知需要人工介入
+
 ### 8. 告知用户
 
-输出产物路径、PR 摘要同步结果和当次完成校验输出。渲染最终输出前，先读取 `.agents/rules/next-step-output.md`，并在绝对最后一行追加 `Completed at: YYYY-MM-DD HH:mm:ss`。
+输出：
+- 产物路径
+- PR 摘要同步结果
+- 当次完成校验输出
+- 下一步建议：继续 `commit` / `create-pr` 或进入最终审查流程
+
+渲染最终输出前，先读取 `.agents/rules/next-step-output.md`，并在绝对最后一行追加 `Completed at: YYYY-MM-DD HH:mm:ss`。
+
+## 完成检查清单
+
+- [ ] 已读取 `reference/summary-update.md`
+- [ ] 已创建人工验证产物
+- [ ] 已更新同一条 PR 摘要评论，或按失败语义停止
+- [ ] 已更新 task.md 并追加 Activity Log
+- [ ] 已运行完成校验

package/templates/.agents/skills/complete-task/SKILL.en.md

@@ -98,7 +98,7 @@ node .agents/scripts/validate-artifact.js check review-ledger .agents/workspace/
 node .agents/scripts/validate-artifact.js check post-review-commit .agents/workspace/active/{task-id} --skill complete-task --format text
 ```
 
-A non-zero exit from either (fail/blocked) -> treat as an unmet prerequisite and **stop**, do not run Steps 3-7. `--force` does **NOT** lift this hard gate: unclosed disagreements must first be closed in the ledger (`confirmed`/`closed`/`human-decided`), and un-re-reviewed post-review commits must be re-reviewed via `review-code` or covered by a `post-review-commit` / `human-decided` exemption row in the ledger.
+A non-zero exit from either (fail/blocked) -> treat as an unmet prerequisite and **stop**, do not run Steps 3-7. If the output contains `reviewed snapshot was not anchored`, rerun `commit` or `review-code`; never fall back to the review baseline. `--force` does **NOT** lift this hard gate: unclosed disagreements must first be closed in the ledger (`confirmed`/`closed`/`human-decided`), and un-re-reviewed commits after an anchor must be re-reviewed via `review-code` or covered by a `post-review-commit` / `human-decided` exemption row in the ledger.
 
 > **⚠️ Prerequisite Branch Check — you must decide whether to continue or stop before proceeding:**
 >
@@ -123,7 +123,7 @@ If prerequisites are not met and the user did not explicitly provide `--force`,
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 Update `.agents/workspace/active/{task-id}/task.md`:
@@ -166,7 +166,7 @@ Check whether `task.md` includes a valid `issue_number`. If not, skip this step
 If a valid `issue_number` exists:
 - First scan and backfill unpublished `task.md`, `analysis*.md`, `review-analysis*.md`, `plan*.md`, `review-plan*.md`, `code*.md`, and `review-code*.md` comments using the backfill rules in `.agents/rules/issue-sync.md` (`task.md` uses the idempotent update path)
 - Backfill checked `## Requirements` items to the Issue body by following the requirements-checkbox sync steps in issue-sync.md
-- Do not set any `status:` label — status labels are automatically cleared when the Issue is closed
+- Do not set any `status:` label — platform automation should clear status labels after the Issue closes; the pre-completion platform-sync gate verifies that a CLOSED Issue has no `status:` labels and fails until the workflow finishes or is repaired
 - Finally create or update the summary comment marked with the summary marker defined in `.agents/rules/issue-sync.md`
 - Read `.agents/rules/issue-fields.md` and follow Flow A to sync every non-empty Issue field (`priority`/`effort`/`start_date`/`target_date`) from `task.md` to the Issue (idempotent; skip without blocking when `has_push=false` or the fetch/write fails)
 

package/templates/.agents/skills/complete-task/SKILL.zh-CN.md

@@ -97,7 +97,7 @@ node .agents/scripts/validate-artifact.js check review-ledger .agents/workspace/
 node .agents/scripts/validate-artifact.js check post-review-commit .agents/workspace/active/{task-id} --skill complete-task --format text
 ```
 
-任一退出码非 0（fail/blocked）→ 按前置条件未满足处理，**停止**，不执行步骤 3-7。`--force` **不解除**本硬门禁：未关闭分歧必须先在账本闭合（`confirmed`/`closed`/`human-decided`），未复审 post-review 提交必须重新 `review-code` 或在账本追加 `post-review-commit` / `human-decided` 豁免行。
+任一退出码非 0（fail/blocked）→ 按前置条件未满足处理，**停止**，不执行步骤 3-7。若输出包含 `reviewed snapshot was not anchored`，必须先重新 `commit` 或 `review-code`；不得回退审查基线。`--force` **不解除**本硬门禁：未关闭分歧必须先在账本闭合（`confirmed`/`closed`/`human-decided`），已锚点后的未复审提交必须重新 `review-code` 或在账本追加 `post-review-commit` / `human-decided` 豁免行。
 
 > **⚠️ 前置条件分支判断 — 你必须先判断“继续”还是“停止”：**
 >
@@ -122,7 +122,7 @@ Please complete the missing steps first, or use --force to override.
 获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 更新 `.agents/workspace/active/{task-id}/task.md`：
@@ -165,7 +165,7 @@ ls .agents/workspace/completed/{task-id}/task.md
 如果存在有效的 `issue_number`：
 - 先按 `.agents/rules/issue-sync.md` 的补发规则扫描并补发未发布的 `task.md`、`analysis*.md`、`review-analysis*.md`、`plan*.md`、`review-plan*.md`、`code*.md`、`review-code*.md` 评论（`task.md` 走幂等更新路径）
 - 按 issue-sync.md 的需求复选框同步步骤，兜底同步 `## 需求` 中已勾选的条目到 Issue body
-- 不要设置 `status:` label — Issue 关闭后 status label 会被自动清除
+- 不要设置 `status:` label — 平台自动化应在 Issue 关闭后清理状态标签；预完成 platform-sync gate 会验证 CLOSED Issue 不含任何 `status:` 标签，残留时失败并要求等待或修复 workflow 后重跑
 - 最后创建或更新 `.agents/rules/issue-sync.md` 中定义的 summary 评论标记对应的 summary 评论
 - 读取 `.agents/rules/issue-fields.md`，按流程 A 把 `task.md` 中所有非空的 Issue 字段（`priority`/`effort`/`start_date`/`target_date`）同步到 Issue（幂等；`has_push=false` 或取数/写入失败时跳过，不阻断）
 

package/templates/.agents/skills/complete-task/config/verify.en.json

@@ -35,6 +35,7 @@
       "verify_issue_type": true,
       "verify_issue_fields": false,
       "verify_milestone": true,
+      "verify_closed_issue_has_no_status_labels": true,
       "expected_comment_marker_key": "summary"
     },
     "artifact": {

package/templates/.agents/skills/complete-task/config/verify.zh-CN.json

@@ -35,6 +35,7 @@
       "verify_issue_type": true,
       "verify_issue_fields": false,
       "verify_milestone": true,
+      "verify_closed_issue_has_no_status_labels": true,
       "expected_comment_marker_key": "summary"
     },
     "artifact": {

package/templates/.agents/skills/create-pr/SKILL.en.md

@@ -41,7 +41,7 @@ Branch on the result:
 This project does not enable the PR flow (`.agents/.airc.json` sets `prFlow: "disabled"`).
 No Pull Request is required; run instead:
   - Claude Code / OpenCode: /complete-task {task-ref}
-  - Gemini CLI: /agent-infra:complete-task {task-ref}
+  - Gemini CLI: /{{project}}:complete-task {task-ref}
   - Codex CLI: $complete-task {task-ref}
 ```
 
@@ -105,7 +105,7 @@ Aggregate a reviewer-facing summary from those artifacts and maintain a single i
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 If `{task-id}` is available, update task.md with `pr_number`, `pr_status` (set to `created`), `updated_at`, `agent_infra_version`, and append the Create PR Activity Log entry including metadata-sync and summary results.
@@ -136,7 +136,7 @@ Explain the created PR URL, summarize metadata sync and summary-comment results,
 ```
 Next step - Watch PR checks (auto self-heal until required checks are green):
   - Claude Code / OpenCode: /watch-pr {task-ref}
-  - Gemini CLI: /agent-infra:watch-pr {task-ref}
+  - Gemini CLI: /{{project}}:watch-pr {task-ref}
   - Codex CLI: $watch-pr {task-ref}
 ```
 
@@ -145,7 +145,7 @@ Alternatively, to skip CI monitoring and archive the task right away, use `compl
 ```
 Next step (alternative) - Skip monitoring and archive the task directly:
   - Claude Code / OpenCode: /complete-task {task-ref}
-  - Gemini CLI: /agent-infra:complete-task {task-ref}
+  - Gemini CLI: /{{project}}:complete-task {task-ref}
   - Codex CLI: $complete-task {task-ref}
 ```
 

package/templates/.agents/skills/create-pr/SKILL.zh-CN.md

@@ -41,7 +41,7 @@ description: >
 当前项目未启用 PR 流程（`.agents/.airc.json` 中 `prFlow: "disabled"`）。
 无需创建 Pull Request，请直接运行：
   - Claude Code / OpenCode：/complete-task {task-ref}
-  - Gemini CLI：/agent-infra:complete-task {task-ref}
+  - Gemini CLI：/{{project}}:complete-task {task-ref}
   - Codex CLI：$complete-task {task-ref}
 ```
 
@@ -105,7 +105,7 @@ description: >
 获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 如果获取到了 `{task-id}`，更新 task.md 的 `pr_number`、`pr_status`（设为 `created`）、`updated_at`、`agent_infra_version`，并追加 Create PR 的 Activity Log，记录元数据同步和摘要发布结果。
@@ -136,7 +136,7 @@ node .agents/scripts/validate-artifact.js gate create-pr .agents/workspace/activ
 ```
 下一步 - 监控 PR 检查（required checks 全绿前自动自愈）：
   - Claude Code / OpenCode：/watch-pr {task-ref}
-  - Gemini CLI：/agent-infra:watch-pr {task-ref}
+  - Gemini CLI：/{{project}}:watch-pr {task-ref}
   - Codex CLI：$watch-pr {task-ref}
 ```
 
@@ -145,7 +145,7 @@ node .agents/scripts/validate-artifact.js gate create-pr .agents/workspace/activ
 ```
 下一步（备选）- 跳过监控、直接归档任务：
   - Claude Code / OpenCode：/complete-task {task-ref}
-  - Gemini CLI：/agent-infra:complete-task {task-ref}
+  - Gemini CLI：/{{project}}:complete-task {task-ref}
   - Codex CLI：$complete-task {task-ref}
 ```
 

package/templates/.agents/skills/create-pr/reference/pr-body-template.en.md

@@ -70,6 +70,6 @@ Final user output should include this follow-up path:
 Next steps:
   - complete the task after the workflow truly finishes:
     - Claude Code / OpenCode: /complete-task {task-ref}
-    - Gemini CLI: /agent-infra:complete-task {task-ref}
+    - Gemini CLI: /{{project}}:complete-task {task-ref}
     - Codex CLI: $complete-task {task-ref}
 ```

package/templates/.agents/skills/create-pr/reference/pr-body-template.zh-CN.md

@@ -70,6 +70,6 @@ Milestone 规则：
 Next steps:
   - complete the task after the workflow truly finishes:
     - Claude Code / OpenCode: /complete-task {task-ref}
-    - Gemini CLI: /agent-infra:complete-task {task-ref}
+    - Gemini CLI: /{{project}}:complete-task {task-ref}
     - Codex CLI: $complete-task {task-ref}
 ```

package/templates/.agents/skills/create-task/SKILL.en.md

@@ -30,7 +30,7 @@ Version stamp rule: when creating or updating `task.md` frontmatter, read `.agen
 
 ## Step Start: Capture the Start Time
 
-This skill **creates** task.md, so there is no file to write at the start. Capture `started_at` in memory before running (`date "+%Y-%m-%d %H:%M:%S%:z"`); when writing the Activity Log at the end, **append both lines at once** — the started line uses `started_at`, the done line uses the completion time, both sharing the base action (started line action gets a ` [started]` suffix, note `started`):
+This skill **creates** task.md, so there is no file to write at the start. Capture `started_at` in memory before running (`date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'`); when writing the Activity Log at the end, **append both lines at once** — the started line uses `started_at`, the done line uses the completion time, both sharing the base action (started line action gets a ` [started]` suffix, note `started`):
 
 ```
 - {started_at} — **Create Task [started]** by {agent} — started
@@ -109,7 +109,7 @@ priority / effort are required: the AI infers them from the task title and descr
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 Update `.agents/workspace/active/{task-id}/task.md`:

package/templates/.agents/skills/create-task/SKILL.zh-CN.md

@@ -30,7 +30,7 @@ description: >
 
 ## 步骤开始：记录开始时间
 
-本技能会**创建** task.md，开始时尚无文件可写。先在内存记录开始时间 `started_at`（`date "+%Y-%m-%d %H:%M:%S%:z"`）；在最后写活动日志时**一次性补两条**——started 行用 `started_at`、done 行用完成时间，二者同基名（started 行 action 加 ` [started]` 后缀、note 用 `started`）：
+本技能会**创建** task.md，开始时尚无文件可写。先在内存记录开始时间 `started_at`（`date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'`）；在最后写活动日志时**一次性补两条**——started 行用 `started_at`、done 行用完成时间，二者同基名（started 行 action 加 ` [started]` 后缀、note 用 `started`）：
 
 ```
 - {started_at} — **Create Task [started]** by {agent} — started
@@ -108,7 +108,7 @@ priority / effort 必填：由 AI 从任务标题与描述推断后填入（候
 获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 更新 `.agents/workspace/active/{task-id}/task.md`：
@@ -183,7 +183,7 @@ node .agents/scripts/validate-artifact.js gate create-task .agents/workspace/act
 
 下一步 - 执行需求分析：
   - Claude Code / OpenCode：/analyze-task {task-ref}
-  - Gemini CLI：/agent-infra:analyze-task {task-ref}
+  - Gemini CLI：/{{project}}:analyze-task {task-ref}
   - Codex CLI：$analyze-task {task-ref}
 ```
 
@@ -202,7 +202,7 @@ node .agents/scripts/validate-artifact.js gate create-task .agents/workspace/act
 
 下一步 - 执行需求分析：
   - Claude Code / OpenCode：/analyze-task {task-ref}
-  - Gemini CLI：/agent-infra:analyze-task {task-ref}
+  - Gemini CLI：/{{project}}:analyze-task {task-ref}
   - Codex CLI：$analyze-task {task-ref}
 ```
 
@@ -226,7 +226,7 @@ Issue 创建失败：
 
 下一步 - 执行需求分析：
   - Claude Code / OpenCode：/analyze-task {task-ref}
-  - Gemini CLI：/agent-infra:analyze-task {task-ref}
+  - Gemini CLI：/{{project}}:analyze-task {task-ref}
   - Codex CLI：$analyze-task {task-ref}
 
 后续如需平台同步：修复认证/网络/模板问题后，可按 `.agents/rules/create-issue.md` 对当前任务手动执行一次 Issue 创建；或手动创建/查找 Issue，并把 `issue_number` 写入 task.md，后续技能会接管级联同步。

package/templates/.agents/skills/import-codescan/SKILL.en.md

@@ -21,7 +21,7 @@ Import the specified Code Scanning (CodeQL) alert and create a remediation task.
 
 ## Step Start: Capture the Start Time
 
-This skill **creates** task.md, so there is no file to write at the start. Capture `started_at` in memory before running (`date "+%Y-%m-%d %H:%M:%S%:z"`); when writing the Activity Log at the end, **append both lines at once** — the started line uses `started_at`, the done line uses the completion time, both sharing the base action (started line action gets a ` [started]` suffix, note `started`):
+This skill **creates** task.md, so there is no file to write at the start. Capture `started_at` in memory before running (`date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'`); when writing the Activity Log at the end, **append both lines at once** — the started line uses `started_at`, the done line uses the completion time, both sharing the base action (started line action gets a ` [started]` suffix, note `started`):
 
 ```
 - {started_at} — **Import Codescan [started]** by {agent} — started
@@ -61,7 +61,7 @@ codescan_alert_number: <alert-number>
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 Update task.md: `current_step` -> `requirement-analysis`.

package/templates/.agents/skills/import-codescan/SKILL.zh-CN.md

@@ -21,7 +21,7 @@ description: >
 
 ## 步骤开始：记录开始时间
 
-本技能会**创建** task.md，开始时尚无文件可写。先在内存记录开始时间 `started_at`（`date "+%Y-%m-%d %H:%M:%S%:z"`）；在最后写活动日志时**一次性补两条**——started 行用 `started_at`、done 行用完成时间，二者同基名（started 行 action 加 ` [started]` 后缀、note 用 `started`）：
+本技能会**创建** task.md，开始时尚无文件可写。先在内存记录开始时间 `started_at`（`date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'`）；在最后写活动日志时**一次性补两条**——started 行用 `started_at`、done 行用完成时间，二者同基名（started 行 action 加 ` [started]` 后缀、note 用 `started`）：
 
 ```
 - {started_at} — **Import Codescan [started]** by {agent} — started
@@ -61,7 +61,7 @@ codescan_alert_number: <alert-number>
 获取当前时间：
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 更新 task.md：`current_step` -> `requirement-analysis`。
@@ -112,7 +112,7 @@ Code Scanning 告警 #{alert-number} 已导入。
 
 下一步：
   - Claude Code / OpenCode：/analyze-task {task-ref}
-  - Gemini CLI：/agent-infra:analyze-task {task-ref}
+  - Gemini CLI：/{{project}}:analyze-task {task-ref}
   - Codex CLI：$analyze-task {task-ref}
 ```
 

package/templates/.agents/skills/import-dependabot/SKILL.en.md

@@ -21,7 +21,7 @@ Import the specified Dependabot security alert and create a remediation task.
 
 ## Step Start: Capture the Start Time
 
-This skill **creates** task.md, so there is no file to write at the start. Capture `started_at` in memory before running (`date "+%Y-%m-%d %H:%M:%S%:z"`); when writing the Activity Log at the end, **append both lines at once** — the started line uses `started_at`, the done line uses the completion time, both sharing the base action (started line action gets a ` [started]` suffix, note `started`):
+This skill **creates** task.md, so there is no file to write at the start. Capture `started_at` in memory before running (`date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'`); when writing the Activity Log at the end, **append both lines at once** — the started line uses `started_at`, the done line uses the completion time, both sharing the base action (started line action gets a ` [started]` suffix, note `started`):
 
 ```
 - {started_at} — **Import Dependabot [started]** by {agent} — started
@@ -64,7 +64,7 @@ ghsa_id: <GHSA-ID>
 Get the current time:
 
 ```bash
-date "+%Y-%m-%d %H:%M:%S%:z"
+date "+%Y-%m-%d %H:%M:%S%z" | sed 's/\([+-][0-9][0-9]\)\([0-9][0-9]\)$/\1:\2/'
 ```
 
 Update task.md: `current_step` -> `requirement-analysis`.