@fc3/wireframe-renderer 0.0.0-stage → 0.2.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (343) hide show
  1. package/LICENSE +673 -0
  2. package/README.md +165 -2
  3. package/bin/bootstrap/terminal-demo +7 -0
  4. package/bin/compile +55 -0
  5. package/bin/install +5 -0
  6. package/bin/lint +12 -0
  7. package/bin/postpublish +5 -0
  8. package/bin/precompile +71 -0
  9. package/bin/prepublish +7 -0
  10. package/bin/remap-paths +172 -0
  11. package/bin/test +9 -0
  12. package/bin/test-one +32 -0
  13. package/dist/.last-compile-time +1 -0
  14. package/dist/.last-publish-time +1 -0
  15. package/dist/src/bootstrap/terminal-demo.d.ts +1 -0
  16. package/dist/src/bootstrap/terminal-demo.js +14 -0
  17. package/dist/src/bootstrap/terminal-demo.js.map +1 -0
  18. package/dist/src/camera.d.ts +26 -0
  19. package/dist/src/camera.js +90 -0
  20. package/dist/src/camera.js.map +1 -0
  21. package/dist/src/canvas-renderer.d.ts +20 -0
  22. package/dist/src/canvas-renderer.js +137 -0
  23. package/dist/src/canvas-renderer.js.map +1 -0
  24. package/dist/src/constant/axis-colors.d.ts +3 -0
  25. package/dist/src/constant/axis-colors.js +13 -0
  26. package/dist/src/constant/axis-colors.js.map +1 -0
  27. package/dist/src/constant/box-edge-index-pairs.d.ts +2 -0
  28. package/dist/src/constant/box-edge-index-pairs.js +18 -0
  29. package/dist/src/constant/box-edge-index-pairs.js.map +1 -0
  30. package/dist/src/constant/camera-limits.d.ts +7 -0
  31. package/dist/src/constant/camera-limits.js +10 -0
  32. package/dist/src/constant/camera-limits.js.map +1 -0
  33. package/dist/src/constant/default-camera-state.d.ts +3 -0
  34. package/dist/src/constant/default-camera-state.js +19 -0
  35. package/dist/src/constant/default-camera-state.js.map +1 -0
  36. package/dist/src/constant/default-palette.d.ts +2 -0
  37. package/dist/src/constant/default-palette.js +17 -0
  38. package/dist/src/constant/default-palette.js.map +1 -0
  39. package/dist/src/constant/default-render-options.d.ts +3 -0
  40. package/dist/src/constant/default-render-options.js +8 -0
  41. package/dist/src/constant/default-render-options.js.map +1 -0
  42. package/dist/src/constant/interaction-rates.d.ts +5 -0
  43. package/dist/src/constant/interaction-rates.js +8 -0
  44. package/dist/src/constant/interaction-rates.js.map +1 -0
  45. package/dist/src/constant/rendering-defaults.d.ts +11 -0
  46. package/dist/src/constant/rendering-defaults.js +14 -0
  47. package/dist/src/constant/rendering-defaults.js.map +1 -0
  48. package/dist/src/constant/stylesheet.d.ts +2 -0
  49. package/dist/src/constant/stylesheet.js +140 -0
  50. package/dist/src/constant/stylesheet.js.map +1 -0
  51. package/dist/src/constant/theme.d.ts +9 -0
  52. package/dist/src/constant/theme.js +12 -0
  53. package/dist/src/constant/theme.js.map +1 -0
  54. package/dist/src/constant/view-orientations.d.ts +4 -0
  55. package/dist/src/constant/view-orientations.js +19 -0
  56. package/dist/src/constant/view-orientations.js.map +1 -0
  57. package/dist/src/enum/axis.d.ts +6 -0
  58. package/dist/src/enum/axis.js +10 -0
  59. package/dist/src/enum/axis.js.map +1 -0
  60. package/dist/src/enum/opening-shape.d.ts +5 -0
  61. package/dist/src/enum/opening-shape.js +9 -0
  62. package/dist/src/enum/opening-shape.js.map +1 -0
  63. package/dist/src/enum/plane.d.ts +6 -0
  64. package/dist/src/enum/plane.js +10 -0
  65. package/dist/src/enum/plane.js.map +1 -0
  66. package/dist/src/enum/primitive-type.d.ts +8 -0
  67. package/dist/src/enum/primitive-type.js +12 -0
  68. package/dist/src/enum/primitive-type.js.map +1 -0
  69. package/dist/src/enum/view-preset.d.ts +10 -0
  70. package/dist/src/enum/view-preset.js +14 -0
  71. package/dist/src/enum/view-preset.js.map +1 -0
  72. package/dist/src/enum/viewer-class-name.d.ts +15 -0
  73. package/dist/src/enum/viewer-class-name.js +19 -0
  74. package/dist/src/enum/viewer-class-name.js.map +1 -0
  75. package/dist/src/example/house-computer.d.ts +3 -0
  76. package/dist/src/example/house-computer.js +2081 -0
  77. package/dist/src/example/house-computer.js.map +1 -0
  78. package/dist/src/index.d.ts +20 -0
  79. package/dist/src/index.js +27 -0
  80. package/dist/src/index.js.map +1 -0
  81. package/dist/src/interaction-controller.d.ts +17 -0
  82. package/dist/src/interaction-controller.js +106 -0
  83. package/dist/src/interaction-controller.js.map +1 -0
  84. package/dist/src/sidebar.d.ts +24 -0
  85. package/dist/src/sidebar.js +121 -0
  86. package/dist/src/sidebar.js.map +1 -0
  87. package/dist/src/terminal/braille-canvas.d.ts +17 -0
  88. package/dist/src/terminal/braille-canvas.js +137 -0
  89. package/dist/src/terminal/braille-canvas.js.map +1 -0
  90. package/dist/src/terminal/constant/terminal-key-rates.d.ts +6 -0
  91. package/dist/src/terminal/constant/terminal-key-rates.js +9 -0
  92. package/dist/src/terminal/constant/terminal-key-rates.js.map +1 -0
  93. package/dist/src/terminal/constant/view-preset-keys.d.ts +3 -0
  94. package/dist/src/terminal/constant/view-preset-keys.js +17 -0
  95. package/dist/src/terminal/constant/view-preset-keys.js.map +1 -0
  96. package/dist/src/terminal/enum/terminal-focus.d.ts +5 -0
  97. package/dist/src/terminal/enum/terminal-focus.js +9 -0
  98. package/dist/src/terminal/enum/terminal-focus.js.map +1 -0
  99. package/dist/src/terminal/index.d.ts +3 -0
  100. package/dist/src/terminal/index.js +11 -0
  101. package/dist/src/terminal/index.js.map +1 -0
  102. package/dist/src/terminal/render-frame.d.ts +6 -0
  103. package/dist/src/terminal/render-frame.js +46 -0
  104. package/dist/src/terminal/render-frame.js.map +1 -0
  105. package/dist/src/terminal/terminal-viewer.d.ts +38 -0
  106. package/dist/src/terminal/terminal-viewer.js +290 -0
  107. package/dist/src/terminal/terminal-viewer.js.map +1 -0
  108. package/dist/src/terminal/type/rgb-color.d.ts +6 -0
  109. package/dist/src/terminal/type/rgb-color.js +3 -0
  110. package/dist/src/terminal/type/rgb-color.js.map +1 -0
  111. package/dist/src/terminal/utility/blend-color.d.ts +3 -0
  112. package/dist/src/terminal/utility/blend-color.js +19 -0
  113. package/dist/src/terminal/utility/blend-color.js.map +1 -0
  114. package/dist/src/terminal/utility/clip-segment.d.ts +5 -0
  115. package/dist/src/terminal/utility/clip-segment.js +38 -0
  116. package/dist/src/terminal/utility/clip-segment.js.map +1 -0
  117. package/dist/src/terminal/utility/escape-tags.d.ts +2 -0
  118. package/dist/src/terminal/utility/escape-tags.js +14 -0
  119. package/dist/src/terminal/utility/escape-tags.js.map +1 -0
  120. package/dist/src/terminal/utility/format-component-row.d.ts +3 -0
  121. package/dist/src/terminal/utility/format-component-row.js +32 -0
  122. package/dist/src/terminal/utility/format-component-row.js.map +1 -0
  123. package/dist/src/terminal/utility/format-hex-color.d.ts +3 -0
  124. package/dist/src/terminal/utility/format-hex-color.js +14 -0
  125. package/dist/src/terminal/utility/format-hex-color.js.map +1 -0
  126. package/dist/src/terminal/utility/format-status-line.d.ts +3 -0
  127. package/dist/src/terminal/utility/format-status-line.js +24 -0
  128. package/dist/src/terminal/utility/format-status-line.js.map +1 -0
  129. package/dist/src/terminal/utility/parse-color.d.ts +3 -0
  130. package/dist/src/terminal/utility/parse-color.js +45 -0
  131. package/dist/src/terminal/utility/parse-color.js.map +1 -0
  132. package/dist/src/terminal/utility/resolve-terminal-color.d.ts +2 -0
  133. package/dist/src/terminal/utility/resolve-terminal-color.js +20 -0
  134. package/dist/src/terminal/utility/resolve-terminal-color.js.map +1 -0
  135. package/dist/src/type/bounding-box.d.ts +6 -0
  136. package/dist/src/type/bounding-box.js +3 -0
  137. package/dist/src/type/bounding-box.js.map +1 -0
  138. package/dist/src/type/camera-state.d.ts +10 -0
  139. package/dist/src/type/camera-state.js +3 -0
  140. package/dist/src/type/camera-state.js.map +1 -0
  141. package/dist/src/type/display-component.d.ts +18 -0
  142. package/dist/src/type/display-component.js +3 -0
  143. package/dist/src/type/display-component.js.map +1 -0
  144. package/dist/src/type/drag-state.d.ts +6 -0
  145. package/dist/src/type/drag-state.js +3 -0
  146. package/dist/src/type/drag-state.js.map +1 -0
  147. package/dist/src/type/frame-dot.d.ts +6 -0
  148. package/dist/src/type/frame-dot.js +3 -0
  149. package/dist/src/type/frame-dot.js.map +1 -0
  150. package/dist/src/type/frame-label.d.ts +7 -0
  151. package/dist/src/type/frame-label.js +3 -0
  152. package/dist/src/type/frame-label.js.map +1 -0
  153. package/dist/src/type/frame-path.d.ts +8 -0
  154. package/dist/src/type/frame-path.js +3 -0
  155. package/dist/src/type/frame-path.js.map +1 -0
  156. package/dist/src/type/frame.d.ts +9 -0
  157. package/dist/src/type/frame.js +3 -0
  158. package/dist/src/type/frame.js.map +1 -0
  159. package/dist/src/type/inherited-style.d.ts +8 -0
  160. package/dist/src/type/inherited-style.js +3 -0
  161. package/dist/src/type/inherited-style.js.map +1 -0
  162. package/dist/src/type/plane-axes.d.ts +7 -0
  163. package/dist/src/type/plane-axes.js +3 -0
  164. package/dist/src/type/plane-axes.js.map +1 -0
  165. package/dist/src/type/polyline.d.ts +3 -0
  166. package/dist/src/type/polyline.js +3 -0
  167. package/dist/src/type/polyline.js.map +1 -0
  168. package/dist/src/type/primitive/box.d.ts +8 -0
  169. package/dist/src/type/primitive/box.js +3 -0
  170. package/dist/src/type/primitive/box.js.map +1 -0
  171. package/dist/src/type/primitive/cylinder.d.ts +11 -0
  172. package/dist/src/type/primitive/cylinder.js +3 -0
  173. package/dist/src/type/primitive/cylinder.js.map +1 -0
  174. package/dist/src/type/primitive/opening.d.ts +24 -0
  175. package/dist/src/type/primitive/opening.js +3 -0
  176. package/dist/src/type/primitive/opening.js.map +1 -0
  177. package/dist/src/type/primitive/polyline.d.ts +8 -0
  178. package/dist/src/type/primitive/polyline.js +3 -0
  179. package/dist/src/type/primitive/polyline.js.map +1 -0
  180. package/dist/src/type/primitive/sphere.d.ts +8 -0
  181. package/dist/src/type/primitive/sphere.js +3 -0
  182. package/dist/src/type/primitive/sphere.js.map +1 -0
  183. package/dist/src/type/primitive-geometry.d.ts +9 -0
  184. package/dist/src/type/primitive-geometry.js +3 -0
  185. package/dist/src/type/primitive-geometry.js.map +1 -0
  186. package/dist/src/type/primitive.d.ts +7 -0
  187. package/dist/src/type/primitive.js +3 -0
  188. package/dist/src/type/primitive.js.map +1 -0
  189. package/dist/src/type/render-options.d.ts +5 -0
  190. package/dist/src/type/render-options.js +3 -0
  191. package/dist/src/type/render-options.js.map +1 -0
  192. package/dist/src/type/screen-point.d.ts +5 -0
  193. package/dist/src/type/screen-point.js +3 -0
  194. package/dist/src/type/screen-point.js.map +1 -0
  195. package/dist/src/type/sidebar-callbacks.d.ts +9 -0
  196. package/dist/src/type/sidebar-callbacks.js +3 -0
  197. package/dist/src/type/sidebar-callbacks.js.map +1 -0
  198. package/dist/src/type/stroke.d.ts +6 -0
  199. package/dist/src/type/stroke.js +3 -0
  200. package/dist/src/type/stroke.js.map +1 -0
  201. package/dist/src/type/vector3.d.ts +6 -0
  202. package/dist/src/type/vector3.js +3 -0
  203. package/dist/src/type/vector3.js.map +1 -0
  204. package/dist/src/type/view-orientation.d.ts +5 -0
  205. package/dist/src/type/view-orientation.js +3 -0
  206. package/dist/src/type/view-orientation.js.map +1 -0
  207. package/dist/src/type/viewer-state.d.ts +11 -0
  208. package/dist/src/type/viewer-state.js +3 -0
  209. package/dist/src/type/viewer-state.js.map +1 -0
  210. package/dist/src/type/viewport.d.ts +5 -0
  211. package/dist/src/type/viewport.js +3 -0
  212. package/dist/src/type/viewport.js.map +1 -0
  213. package/dist/src/type/visibility-map.d.ts +2 -0
  214. package/dist/src/type/visibility-map.js +3 -0
  215. package/dist/src/type/visibility-map.js.map +1 -0
  216. package/dist/src/type/wireframe-component.d.ts +13 -0
  217. package/dist/src/type/wireframe-component.js +3 -0
  218. package/dist/src/type/wireframe-component.js.map +1 -0
  219. package/dist/src/type/wireframe-scene.d.ts +10 -0
  220. package/dist/src/type/wireframe-scene.js +3 -0
  221. package/dist/src/type/wireframe-scene.js.map +1 -0
  222. package/dist/src/utility/add-vectors.d.ts +3 -0
  223. package/dist/src/utility/add-vectors.js +11 -0
  224. package/dist/src/utility/add-vectors.js.map +1 -0
  225. package/dist/src/utility/build-box-outlines.d.ts +4 -0
  226. package/dist/src/utility/build-box-outlines.js +32 -0
  227. package/dist/src/utility/build-box-outlines.js.map +1 -0
  228. package/dist/src/utility/build-circle-outline.d.ts +5 -0
  229. package/dist/src/utility/build-circle-outline.js +25 -0
  230. package/dist/src/utility/build-circle-outline.js.map +1 -0
  231. package/dist/src/utility/build-cylinder-outlines.d.ts +4 -0
  232. package/dist/src/utility/build-cylinder-outlines.js +34 -0
  233. package/dist/src/utility/build-cylinder-outlines.js.map +1 -0
  234. package/dist/src/utility/build-frame.d.ts +8 -0
  235. package/dist/src/utility/build-frame.js +75 -0
  236. package/dist/src/utility/build-frame.js.map +1 -0
  237. package/dist/src/utility/build-initial-visibility.d.ts +4 -0
  238. package/dist/src/utility/build-initial-visibility.js +11 -0
  239. package/dist/src/utility/build-initial-visibility.js.map +1 -0
  240. package/dist/src/utility/build-opening-outlines.d.ts +4 -0
  241. package/dist/src/utility/build-opening-outlines.js +31 -0
  242. package/dist/src/utility/build-opening-outlines.js.map +1 -0
  243. package/dist/src/utility/build-primitive-geometry.d.ts +4 -0
  244. package/dist/src/utility/build-primitive-geometry.js +40 -0
  245. package/dist/src/utility/build-primitive-geometry.js.map +1 -0
  246. package/dist/src/utility/build-rectangle-outline.d.ts +5 -0
  247. package/dist/src/utility/build-rectangle-outline.js +23 -0
  248. package/dist/src/utility/build-rectangle-outline.js.map +1 -0
  249. package/dist/src/utility/build-sphere-outlines.d.ts +4 -0
  250. package/dist/src/utility/build-sphere-outlines.js +16 -0
  251. package/dist/src/utility/build-sphere-outlines.js.map +1 -0
  252. package/dist/src/utility/clamp.d.ts +2 -0
  253. package/dist/src/utility/clamp.js +7 -0
  254. package/dist/src/utility/clamp.js.map +1 -0
  255. package/dist/src/utility/collect-display-points.d.ts +4 -0
  256. package/dist/src/utility/collect-display-points.js +13 -0
  257. package/dist/src/utility/collect-display-points.js.map +1 -0
  258. package/dist/src/utility/compute-bounding-box.d.ts +4 -0
  259. package/dist/src/utility/compute-bounding-box.js +29 -0
  260. package/dist/src/utility/compute-bounding-box.js.map +1 -0
  261. package/dist/src/utility/compute-centroid.d.ts +3 -0
  262. package/dist/src/utility/compute-centroid.js +17 -0
  263. package/dist/src/utility/compute-centroid.js.map +1 -0
  264. package/dist/src/utility/create-element.d.ts +2 -0
  265. package/dist/src/utility/create-element.js +11 -0
  266. package/dist/src/utility/create-element.js.map +1 -0
  267. package/dist/src/utility/create-viewer-state.d.ts +4 -0
  268. package/dist/src/utility/create-viewer-state.js +29 -0
  269. package/dist/src/utility/create-viewer-state.js.map +1 -0
  270. package/dist/src/utility/fit-camera-to-bounding-box.d.ts +4 -0
  271. package/dist/src/utility/fit-camera-to-bounding-box.js +23 -0
  272. package/dist/src/utility/fit-camera-to-bounding-box.js.map +1 -0
  273. package/dist/src/utility/flatten-components.d.ts +4 -0
  274. package/dist/src/utility/flatten-components.js +70 -0
  275. package/dist/src/utility/flatten-components.js.map +1 -0
  276. package/dist/src/utility/get-bounding-box-center.d.ts +4 -0
  277. package/dist/src/utility/get-bounding-box-center.js +14 -0
  278. package/dist/src/utility/get-bounding-box-center.js.map +1 -0
  279. package/dist/src/utility/get-bounding-box-size.d.ts +4 -0
  280. package/dist/src/utility/get-bounding-box-size.js +12 -0
  281. package/dist/src/utility/get-bounding-box-size.js.map +1 -0
  282. package/dist/src/utility/get-focal-length.d.ts +2 -0
  283. package/dist/src/utility/get-focal-length.js +9 -0
  284. package/dist/src/utility/get-focal-length.js.map +1 -0
  285. package/dist/src/utility/get-perpendicular-axes.d.ts +3 -0
  286. package/dist/src/utility/get-perpendicular-axes.js +18 -0
  287. package/dist/src/utility/get-perpendicular-axes.js.map +1 -0
  288. package/dist/src/utility/get-plane-axes.d.ts +4 -0
  289. package/dist/src/utility/get-plane-axes.js +19 -0
  290. package/dist/src/utility/get-plane-axes.js.map +1 -0
  291. package/dist/src/utility/get-primitive-anchor.d.ts +4 -0
  292. package/dist/src/utility/get-primitive-anchor.js +20 -0
  293. package/dist/src/utility/get-primitive-anchor.js.map +1 -0
  294. package/dist/src/utility/get-vector-component.d.ts +4 -0
  295. package/dist/src/utility/get-vector-component.js +18 -0
  296. package/dist/src/utility/get-vector-component.js.map +1 -0
  297. package/dist/src/utility/get-vector-length.d.ts +3 -0
  298. package/dist/src/utility/get-vector-length.js +7 -0
  299. package/dist/src/utility/get-vector-length.js.map +1 -0
  300. package/dist/src/utility/has-hidden-ancestor.d.ts +4 -0
  301. package/dist/src/utility/has-hidden-ancestor.js +9 -0
  302. package/dist/src/utility/has-hidden-ancestor.js.map +1 -0
  303. package/dist/src/utility/inject-stylesheet.d.ts +2 -0
  304. package/dist/src/utility/inject-stylesheet.js +21 -0
  305. package/dist/src/utility/inject-stylesheet.js.map +1 -0
  306. package/dist/src/utility/is-component-shown.d.ts +4 -0
  307. package/dist/src/utility/is-component-shown.js +10 -0
  308. package/dist/src/utility/is-component-shown.js.map +1 -0
  309. package/dist/src/utility/offset-vector-along-axis.d.ts +4 -0
  310. package/dist/src/utility/offset-vector-along-axis.js +14 -0
  311. package/dist/src/utility/offset-vector-along-axis.js.map +1 -0
  312. package/dist/src/utility/pick-palette-color.d.ts +2 -0
  313. package/dist/src/utility/pick-palette-color.js +12 -0
  314. package/dist/src/utility/pick-palette-color.js.map +1 -0
  315. package/dist/src/utility/project-polyline.d.ts +5 -0
  316. package/dist/src/utility/project-polyline.js +22 -0
  317. package/dist/src/utility/project-polyline.js.map +1 -0
  318. package/dist/src/utility/project-vector.d.ts +6 -0
  319. package/dist/src/utility/project-vector.js +30 -0
  320. package/dist/src/utility/project-vector.js.map +1 -0
  321. package/dist/src/utility/rotate-vector.d.ts +3 -0
  322. package/dist/src/utility/rotate-vector.js +17 -0
  323. package/dist/src/utility/rotate-vector.js.map +1 -0
  324. package/dist/src/utility/scale-vector.d.ts +3 -0
  325. package/dist/src/utility/scale-vector.js +11 -0
  326. package/dist/src/utility/scale-vector.js.map +1 -0
  327. package/dist/src/utility/subtract-vectors.d.ts +3 -0
  328. package/dist/src/utility/subtract-vectors.js +11 -0
  329. package/dist/src/utility/subtract-vectors.js.map +1 -0
  330. package/dist/src/utility/unrotate-vector.d.ts +3 -0
  331. package/dist/src/utility/unrotate-vector.js +17 -0
  332. package/dist/src/utility/unrotate-vector.js.map +1 -0
  333. package/dist/src/utility/validate-scene.d.ts +3 -0
  334. package/dist/src/utility/validate-scene.js +70 -0
  335. package/dist/src/utility/validate-scene.js.map +1 -0
  336. package/dist/src/utility/with-vector-component.d.ts +4 -0
  337. package/dist/src/utility/with-vector-component.js +18 -0
  338. package/dist/src/utility/with-vector-component.js.map +1 -0
  339. package/dist/src/wireframe-viewer.d.ts +27 -0
  340. package/dist/src/wireframe-viewer.js +128 -0
  341. package/dist/src/wireframe-viewer.js.map +1 -0
  342. package/dist/tsconfig.tsbuildinfo +1 -0
  343. package/package.json +64 -5
@@ -0,0 +1,2081 @@
1
+ "use strict";
2
+ var __importDefault = (this && this.__importDefault) || function (mod) {
3
+ return (mod && mod.__esModule) ? mod : { "default": mod };
4
+ };
5
+ Object.defineProperty(exports, "__esModule", { value: true });
6
+ const axis_1 = __importDefault(require("./../enum/axis.js"));
7
+ const plane_1 = __importDefault(require("./../enum/plane.js"));
8
+ const opening_shape_1 = __importDefault(require("./../enum/opening-shape.js"));
9
+ const primitive_type_1 = __importDefault(require("./../enum/primitive-type.js"));
10
+ const HOUSE_COMPUTER_SCENE = {
11
+ title: 'House Computer internal layout',
12
+ subtitle: 'Rev C-9 · 150 mm cube',
13
+ units: 'mm',
14
+ components: [
15
+ {
16
+ id: 'plate',
17
+ label: 'plate',
18
+ color: '#9aa4b2',
19
+ children: [
20
+ {
21
+ id: 'plate_base',
22
+ label: 'plate base',
23
+ note: 'The base is a stock sheet. The hood walls stand on felt dots on its outer 6 mm ring.',
24
+ primitives: [
25
+ {
26
+ type: primitive_type_1.default.BOX,
27
+ center: { x: 0, y: 2, z: 0 },
28
+ size: { x: 150, y: 2, z: 150 }
29
+ }
30
+ ]
31
+ },
32
+ {
33
+ id: 'plate_feet',
34
+ label: 'plate feet',
35
+ note: 'Four felt pads under the plate: scratch protection only. Nothing runs or breathes under the plate any more.',
36
+ primitives: [
37
+ {
38
+ type: primitive_type_1.default.CYLINDER,
39
+ axis: axis_1.default.Y,
40
+ center: { x: 66, y: 0, z: 66 },
41
+ radius: 5,
42
+ length: 2
43
+ },
44
+ {
45
+ type: primitive_type_1.default.CYLINDER,
46
+ axis: axis_1.default.Y,
47
+ center: { x: -66, y: 0, z: 66 },
48
+ radius: 5,
49
+ length: 2
50
+ },
51
+ {
52
+ type: primitive_type_1.default.CYLINDER,
53
+ axis: axis_1.default.Y,
54
+ center: { x: 66, y: 0, z: -66 },
55
+ radius: 5,
56
+ length: 2
57
+ },
58
+ {
59
+ type: primitive_type_1.default.CYLINDER,
60
+ axis: axis_1.default.Y,
61
+ center: { x: -66, y: 0, z: -66 },
62
+ radius: 5,
63
+ length: 2
64
+ }
65
+ ]
66
+ },
67
+ {
68
+ id: 'plate_dots',
69
+ label: 'plate dots',
70
+ note: "Eight 2.5 mm felt dots on the plate's outer ring, under the hood walls. The hood floats 2.5 mm: the whole 600 mm perimeter is the intake, 5-8x the area of the old eight holes. Dots are on the plate, so the hood stays featureless.",
71
+ primitives: [
72
+ {
73
+ type: primitive_type_1.default.CYLINDER,
74
+ axis: axis_1.default.Y,
75
+ center: { x: -40, y: 4.25, z: -72 },
76
+ radius: 5,
77
+ length: 2.5
78
+ },
79
+ {
80
+ type: primitive_type_1.default.CYLINDER,
81
+ axis: axis_1.default.Y,
82
+ center: { x: 40, y: 4.25, z: -72 },
83
+ radius: 5,
84
+ length: 2.5
85
+ },
86
+ {
87
+ type: primitive_type_1.default.CYLINDER,
88
+ axis: axis_1.default.Y,
89
+ center: { x: -40, y: 4.25, z: 72 },
90
+ radius: 5,
91
+ length: 2.5
92
+ },
93
+ {
94
+ type: primitive_type_1.default.CYLINDER,
95
+ axis: axis_1.default.Y,
96
+ center: { x: 40, y: 4.25, z: 72 },
97
+ radius: 5,
98
+ length: 2.5
99
+ },
100
+ {
101
+ type: primitive_type_1.default.CYLINDER,
102
+ axis: axis_1.default.Y,
103
+ center: { x: -72, y: 4.25, z: -40 },
104
+ radius: 5,
105
+ length: 2.5
106
+ },
107
+ {
108
+ type: primitive_type_1.default.CYLINDER,
109
+ axis: axis_1.default.Y,
110
+ center: { x: -72, y: 4.25, z: 40 },
111
+ radius: 5,
112
+ length: 2.5
113
+ },
114
+ {
115
+ type: primitive_type_1.default.CYLINDER,
116
+ axis: axis_1.default.Y,
117
+ center: { x: 72, y: 4.25, z: -40 },
118
+ radius: 5,
119
+ length: 2.5
120
+ },
121
+ {
122
+ type: primitive_type_1.default.CYLINDER,
123
+ axis: axis_1.default.Y,
124
+ center: { x: 72, y: 4.25, z: 40 },
125
+ radius: 5,
126
+ length: 2.5
127
+ }
128
+ ]
129
+ },
130
+ {
131
+ id: 'plate_stops',
132
+ label: 'plate stops',
133
+ note: "Three zinc steel corner braces screwed to the plate, legs 1 mm inside the hood walls: two 1/2 in (12.7 mm) at the front corners, one 1 in at the back. Forward: FL + FR. Backward: B + the socket flanges (2 mm). Sideways: the hood's notch on the faceplate (+/-2 mm) and the LoRa perch's leg on the left (1 mm). Hood interior 138 nominal, never under 136.",
134
+ primitives: [
135
+ {
136
+ type: primitive_type_1.default.BOX,
137
+ center: { x: -56, y: 4, z: -61.65 },
138
+ size: { x: 12, y: 2, z: 12.7 }
139
+ },
140
+ {
141
+ type: primitive_type_1.default.BOX,
142
+ center: { x: 58, y: 4, z: -61.65 },
143
+ size: { x: 12, y: 2, z: 12.7 }
144
+ },
145
+ {
146
+ type: primitive_type_1.default.BOX,
147
+ center: { x: -14, y: 4, z: 56.5 },
148
+ size: { x: 12, y: 2, z: 23 }
149
+ }
150
+ ],
151
+ children: [
152
+ {
153
+ id: 'plate_stops_stop_fl',
154
+ label: 'stop FL',
155
+ note: "front-left 1/2 in brace, leg against the front wall (z -68..-66), x -62..-50: just outside the upstand's edge",
156
+ primitives: [
157
+ {
158
+ type: primitive_type_1.default.BOX,
159
+ center: { x: -56, y: 9.35, z: -67 },
160
+ size: { x: 12, y: 12.7, z: 2 }
161
+ }
162
+ ]
163
+ },
164
+ {
165
+ id: 'plate_stops_stop_fr',
166
+ label: 'stop FR',
167
+ note: 'front-right 1/2 in brace, x 52..64; the front dipole hinge is above its foot, the radio body 3 mm behind it',
168
+ primitives: [
169
+ {
170
+ type: primitive_type_1.default.BOX,
171
+ center: { x: 58, y: 9.35, z: -67 },
172
+ size: { x: 12, y: 12.7, z: 2 }
173
+ }
174
+ ]
175
+ },
176
+ {
177
+ id: 'plate_stops_stop_b',
178
+ label: 'stop B',
179
+ note: "back 1 in brace, leg against the back wall (z 66..68), x -20..-8: between the Pi's pair B plugs and the port bracket",
180
+ primitives: [
181
+ {
182
+ type: primitive_type_1.default.BOX,
183
+ center: { x: -14, y: 15.5, z: 67 },
184
+ size: { x: 12, y: 25, z: 2 }
185
+ }
186
+ ]
187
+ }
188
+ ]
189
+ },
190
+ {
191
+ id: 'plate_upstand',
192
+ label: 'plate upstand',
193
+ note: "Joined to the base by two short pieces of 1 in angle (plate_angle). Not a hood locator any more: 12 mm from the hood's front wall.",
194
+ primitives: [
195
+ {
196
+ type: primitive_type_1.default.BOX,
197
+ center: { x: 0, y: 74, z: -56 },
198
+ size: { x: 100, y: 142, z: 2 }
199
+ }
200
+ ],
201
+ children: [
202
+ {
203
+ id: 'plate_upstand_openings',
204
+ label: 'openings',
205
+ primitives: [
206
+ {
207
+ type: primitive_type_1.default.OPENING,
208
+ shape: opening_shape_1.default.CIRCLE,
209
+ plane: plane_1.default.XY,
210
+ center: { x: 22, y: 125, z: -56 },
211
+ depth: 2,
212
+ radius: 5
213
+ }
214
+ ]
215
+ }
216
+ ]
217
+ },
218
+ {
219
+ id: 'plate_angle',
220
+ label: 'plate angle',
221
+ note: 'Two offcuts of the same 12 in angle stock as the port bracket (35 + 20 + 60 = 115 mm of 305). Screws through both legs; a try-square at assembly makes it true.',
222
+ primitives: [
223
+ {
224
+ type: primitive_type_1.default.BOX,
225
+ center: { x: -32.5, y: 15.5, z: -53.5 },
226
+ size: { x: 35, y: 25, z: 3 }
227
+ },
228
+ {
229
+ type: primitive_type_1.default.BOX,
230
+ center: { x: -32.5, y: 4.5, z: -42.5 },
231
+ size: { x: 35, y: 3, z: 25 }
232
+ },
233
+ {
234
+ type: primitive_type_1.default.BOX,
235
+ center: { x: 10, y: 15.5, z: -53.5 },
236
+ size: { x: 20, y: 25, z: 3 }
237
+ },
238
+ {
239
+ type: primitive_type_1.default.BOX,
240
+ center: { x: 10, y: 4.5, z: -42.5 },
241
+ size: { x: 20, y: 3, z: 25 }
242
+ }
243
+ ]
244
+ },
245
+ {
246
+ id: 'port_bracket',
247
+ label: 'port bracket',
248
+ note: 'The only user-facing connectors, in a row along the bottom of the back face, left to right seen from behind: power, USB, WAN. The USB is USB 3 now: it is the visitor port AND the external-drive port. Software on that port: mass-storage class only, read-only mount, no auto-execute.',
249
+ primitives: [
250
+ {
251
+ type: primitive_type_1.default.BOX,
252
+ center: { x: 28, y: 15.5, z: 63.5 },
253
+ size: { x: 60, y: 25, z: 3 }
254
+ },
255
+ {
256
+ type: primitive_type_1.default.BOX,
257
+ center: { x: 28, y: 4.5, z: 52.5 },
258
+ size: { x: 60, y: 3, z: 25 }
259
+ },
260
+ {
261
+ type: primitive_type_1.default.BOX,
262
+ center: { x: 8, y: 11, z: 65.9 },
263
+ size: { x: 20, y: 18, z: 1.8 }
264
+ },
265
+ {
266
+ type: primitive_type_1.default.BOX,
267
+ center: { x: 30, y: 11, z: 65.9 },
268
+ size: { x: 24, y: 14, z: 1.8 }
269
+ },
270
+ {
271
+ type: primitive_type_1.default.BOX,
272
+ center: { x: 50, y: 11, z: 65.9 },
273
+ size: { x: 14, y: 12, z: 1.8 }
274
+ }
275
+ ],
276
+ children: [
277
+ {
278
+ id: 'port_bracket_rj45_wan',
279
+ label: 'RJ45: WAN',
280
+ note: 'panel-mount Cat6 extension (jack outside, captive pigtail inside); body x 0..16, z 45..63',
281
+ primitives: [
282
+ {
283
+ type: primitive_type_1.default.BOX,
284
+ center: { x: 8, y: 11, z: 54 },
285
+ size: { x: 16, y: 15, z: 18 }
286
+ }
287
+ ]
288
+ },
289
+ {
290
+ id: 'port_bracket_usb_a_visitor_external_drive_usb_3',
291
+ label: 'USB-A: visitor / external drive (USB 3)',
292
+ note: 'panel-mount USB 3.0 extension (socket outside, captive pigtail inside); body x 20..40, z 45..63. Also where a portable SSD plugs in.',
293
+ primitives: [
294
+ {
295
+ type: primitive_type_1.default.BOX,
296
+ center: { x: 30, y: 11, z: 54 },
297
+ size: { x: 20, y: 11, z: 18 }
298
+ }
299
+ ]
300
+ },
301
+ {
302
+ id: 'port_bracket_power_in',
303
+ label: 'power in',
304
+ note: 'panel-mount USB-C extension (Pi) or 4.0x1.7 DC extension (Wyse); body x 44..56, z 47..63',
305
+ primitives: [
306
+ {
307
+ type: primitive_type_1.default.BOX,
308
+ center: { x: 50, y: 11, z: 55 },
309
+ size: { x: 12, y: 9, z: 16 }
310
+ }
311
+ ]
312
+ },
313
+ {
314
+ id: 'port_bracket_500_ma_polyfuse',
315
+ label: '500 mA polyfuse',
316
+ note: "spliced into the USB pigtail's VBUS (red) wire, heat-shrunk: a shorted or greedy visitor drive trips this port alone, not the Pi's shared 1.2 A limiter. Replaces the galvanic isolator.",
317
+ primitives: [
318
+ {
319
+ type: primitive_type_1.default.BOX,
320
+ center: { x: 30, y: 21.5, z: 48 },
321
+ size: { x: 6, y: 3, z: 8 }
322
+ }
323
+ ]
324
+ }
325
+ ]
326
+ }
327
+ ]
328
+ },
329
+ {
330
+ id: 'screen',
331
+ label: 'screen',
332
+ color: '#ffb000',
333
+ line_width: 1.4,
334
+ children: [
335
+ {
336
+ id: 'screen_top_left',
337
+ label: 'screen top left',
338
+ note: 'Waveshare 1.5 in SSD1327 module on the FRONT face of the upstand, 6 mm standoffs, connector outboard. Glass 3 mm behind the hood face instead of 11.',
339
+ primitives: [
340
+ {
341
+ type: primitive_type_1.default.CYLINDER,
342
+ axis: axis_1.default.Z,
343
+ center: { x: -45.3, y: 84, z: -60 },
344
+ radius: 1.5,
345
+ length: 6
346
+ },
347
+ {
348
+ type: primitive_type_1.default.CYLINDER,
349
+ axis: axis_1.default.Z,
350
+ center: { x: -45.3, y: 117, z: -60 },
351
+ radius: 1.5,
352
+ length: 6
353
+ },
354
+ {
355
+ type: primitive_type_1.default.CYLINDER,
356
+ axis: axis_1.default.Z,
357
+ center: { x: -4.800000000000001, y: 84, z: -60 },
358
+ radius: 1.5,
359
+ length: 6
360
+ },
361
+ {
362
+ type: primitive_type_1.default.CYLINDER,
363
+ axis: axis_1.default.Z,
364
+ center: { x: -4.800000000000001, y: 117, z: -60 },
365
+ radius: 1.5,
366
+ length: 6
367
+ },
368
+ {
369
+ type: primitive_type_1.default.BOX,
370
+ center: { x: -25.05, y: 100.5, z: -61.5 },
371
+ size: { x: 44.5, y: 37, z: 3 }
372
+ },
373
+ {
374
+ type: primitive_type_1.default.BOX,
375
+ center: { x: -25.05, y: 100.5, z: -63.8 },
376
+ size: { x: 44.5, y: 37, z: 1.6 }
377
+ },
378
+ {
379
+ type: primitive_type_1.default.BOX,
380
+ center: { x: -20, y: 100.5, z: -65.35 },
381
+ size: { x: 33.8, y: 32, z: 1.5 }
382
+ },
383
+ {
384
+ type: primitive_type_1.default.BOX,
385
+ center: { x: -20, y: 100.5, z: -66.2 },
386
+ size: { x: 26.9, y: 26.9, z: 0.2 }
387
+ },
388
+ {
389
+ type: primitive_type_1.default.BOX,
390
+ center: { x: -20, y: 100.5, z: -66.35 },
391
+ size: { x: 32, y: 32, z: 0.1 }
392
+ }
393
+ ],
394
+ children: [
395
+ {
396
+ id: 'screen_top_left_7_pin',
397
+ label: '7-pin',
398
+ note: 'connector on the back, outboard end',
399
+ primitives: [
400
+ {
401
+ type: primitive_type_1.default.BOX,
402
+ center: { x: -40, y: 100.5, z: -60.5 },
403
+ size: { x: 4, y: 10, z: 5 }
404
+ }
405
+ ]
406
+ }
407
+ ]
408
+ },
409
+ {
410
+ id: 'screen_top_right',
411
+ label: 'screen top right',
412
+ note: 'Waveshare 1.5 in SSD1327 module on the FRONT face of the upstand, 6 mm standoffs, connector outboard. Glass 3 mm behind the hood face instead of 11.',
413
+ primitives: [
414
+ {
415
+ type: primitive_type_1.default.CYLINDER,
416
+ axis: axis_1.default.Z,
417
+ center: { x: 4.800000000000001, y: 84, z: -60 },
418
+ radius: 1.5,
419
+ length: 6
420
+ },
421
+ {
422
+ type: primitive_type_1.default.CYLINDER,
423
+ axis: axis_1.default.Z,
424
+ center: { x: 4.800000000000001, y: 117, z: -60 },
425
+ radius: 1.5,
426
+ length: 6
427
+ },
428
+ {
429
+ type: primitive_type_1.default.CYLINDER,
430
+ axis: axis_1.default.Z,
431
+ center: { x: 45.3, y: 84, z: -60 },
432
+ radius: 1.5,
433
+ length: 6
434
+ },
435
+ {
436
+ type: primitive_type_1.default.CYLINDER,
437
+ axis: axis_1.default.Z,
438
+ center: { x: 45.3, y: 117, z: -60 },
439
+ radius: 1.5,
440
+ length: 6
441
+ },
442
+ {
443
+ type: primitive_type_1.default.BOX,
444
+ center: { x: 25.05, y: 100.5, z: -61.5 },
445
+ size: { x: 44.5, y: 37, z: 3 }
446
+ },
447
+ {
448
+ type: primitive_type_1.default.BOX,
449
+ center: { x: 25.05, y: 100.5, z: -63.8 },
450
+ size: { x: 44.5, y: 37, z: 1.6 }
451
+ },
452
+ {
453
+ type: primitive_type_1.default.BOX,
454
+ center: { x: 20, y: 100.5, z: -65.35 },
455
+ size: { x: 33.8, y: 32, z: 1.5 }
456
+ },
457
+ {
458
+ type: primitive_type_1.default.BOX,
459
+ center: { x: 20, y: 100.5, z: -66.2 },
460
+ size: { x: 26.9, y: 26.9, z: 0.2 }
461
+ },
462
+ {
463
+ type: primitive_type_1.default.BOX,
464
+ center: { x: 20, y: 100.5, z: -66.35 },
465
+ size: { x: 32, y: 32, z: 0.1 }
466
+ }
467
+ ],
468
+ children: [
469
+ {
470
+ id: 'screen_top_right_7_pin',
471
+ label: '7-pin',
472
+ note: 'connector on the back, outboard end',
473
+ primitives: [
474
+ {
475
+ type: primitive_type_1.default.BOX,
476
+ center: { x: 40, y: 100.5, z: -60.5 },
477
+ size: { x: 4, y: 10, z: 5 }
478
+ }
479
+ ]
480
+ }
481
+ ]
482
+ },
483
+ {
484
+ id: 'screen_bottom_left',
485
+ label: 'screen bottom left',
486
+ note: 'Waveshare 1.5 in SSD1327 module on the FRONT face of the upstand, 6 mm standoffs, connector outboard. Glass 3 mm behind the hood face instead of 11.',
487
+ primitives: [
488
+ {
489
+ type: primitive_type_1.default.CYLINDER,
490
+ axis: axis_1.default.Z,
491
+ center: { x: -45.3, y: 44, z: -60 },
492
+ radius: 1.5,
493
+ length: 6
494
+ },
495
+ {
496
+ type: primitive_type_1.default.CYLINDER,
497
+ axis: axis_1.default.Z,
498
+ center: { x: -45.3, y: 77, z: -60 },
499
+ radius: 1.5,
500
+ length: 6
501
+ },
502
+ {
503
+ type: primitive_type_1.default.CYLINDER,
504
+ axis: axis_1.default.Z,
505
+ center: { x: -4.800000000000001, y: 44, z: -60 },
506
+ radius: 1.5,
507
+ length: 6
508
+ },
509
+ {
510
+ type: primitive_type_1.default.CYLINDER,
511
+ axis: axis_1.default.Z,
512
+ center: { x: -4.800000000000001, y: 77, z: -60 },
513
+ radius: 1.5,
514
+ length: 6
515
+ },
516
+ {
517
+ type: primitive_type_1.default.BOX,
518
+ center: { x: -25.05, y: 60.5, z: -61.5 },
519
+ size: { x: 44.5, y: 37, z: 3 }
520
+ },
521
+ {
522
+ type: primitive_type_1.default.BOX,
523
+ center: { x: -25.05, y: 60.5, z: -63.8 },
524
+ size: { x: 44.5, y: 37, z: 1.6 }
525
+ },
526
+ {
527
+ type: primitive_type_1.default.BOX,
528
+ center: { x: -20, y: 60.5, z: -65.35 },
529
+ size: { x: 33.8, y: 32, z: 1.5 }
530
+ },
531
+ {
532
+ type: primitive_type_1.default.BOX,
533
+ center: { x: -20, y: 60.5, z: -66.2 },
534
+ size: { x: 26.9, y: 26.9, z: 0.2 }
535
+ },
536
+ {
537
+ type: primitive_type_1.default.BOX,
538
+ center: { x: -20, y: 60.5, z: -66.35 },
539
+ size: { x: 32, y: 32, z: 0.1 }
540
+ }
541
+ ],
542
+ children: [
543
+ {
544
+ id: 'screen_bottom_left_7_pin',
545
+ label: '7-pin',
546
+ note: 'connector on the back, outboard end',
547
+ primitives: [
548
+ {
549
+ type: primitive_type_1.default.BOX,
550
+ center: { x: -40, y: 60.5, z: -60.5 },
551
+ size: { x: 4, y: 10, z: 5 }
552
+ }
553
+ ]
554
+ }
555
+ ]
556
+ },
557
+ {
558
+ id: 'screen_bottom_right',
559
+ label: 'screen bottom right',
560
+ note: 'Waveshare 1.5 in SSD1327 module on the FRONT face of the upstand, 6 mm standoffs, connector outboard. Glass 3 mm behind the hood face instead of 11.',
561
+ primitives: [
562
+ {
563
+ type: primitive_type_1.default.CYLINDER,
564
+ axis: axis_1.default.Z,
565
+ center: { x: 4.800000000000001, y: 44, z: -60 },
566
+ radius: 1.5,
567
+ length: 6
568
+ },
569
+ {
570
+ type: primitive_type_1.default.CYLINDER,
571
+ axis: axis_1.default.Z,
572
+ center: { x: 4.800000000000001, y: 77, z: -60 },
573
+ radius: 1.5,
574
+ length: 6
575
+ },
576
+ {
577
+ type: primitive_type_1.default.CYLINDER,
578
+ axis: axis_1.default.Z,
579
+ center: { x: 45.3, y: 44, z: -60 },
580
+ radius: 1.5,
581
+ length: 6
582
+ },
583
+ {
584
+ type: primitive_type_1.default.CYLINDER,
585
+ axis: axis_1.default.Z,
586
+ center: { x: 45.3, y: 77, z: -60 },
587
+ radius: 1.5,
588
+ length: 6
589
+ },
590
+ {
591
+ type: primitive_type_1.default.BOX,
592
+ center: { x: 25.05, y: 60.5, z: -61.5 },
593
+ size: { x: 44.5, y: 37, z: 3 }
594
+ },
595
+ {
596
+ type: primitive_type_1.default.BOX,
597
+ center: { x: 25.05, y: 60.5, z: -63.8 },
598
+ size: { x: 44.5, y: 37, z: 1.6 }
599
+ },
600
+ {
601
+ type: primitive_type_1.default.BOX,
602
+ center: { x: 20, y: 60.5, z: -65.35 },
603
+ size: { x: 33.8, y: 32, z: 1.5 }
604
+ },
605
+ {
606
+ type: primitive_type_1.default.BOX,
607
+ center: { x: 20, y: 60.5, z: -66.2 },
608
+ size: { x: 26.9, y: 26.9, z: 0.2 }
609
+ },
610
+ {
611
+ type: primitive_type_1.default.BOX,
612
+ center: { x: 20, y: 60.5, z: -66.35 },
613
+ size: { x: 32, y: 32, z: 0.1 }
614
+ }
615
+ ],
616
+ children: [
617
+ {
618
+ id: 'screen_bottom_right_7_pin',
619
+ label: '7-pin',
620
+ note: 'connector on the back, outboard end',
621
+ primitives: [
622
+ {
623
+ type: primitive_type_1.default.BOX,
624
+ center: { x: 40, y: 60.5, z: -60.5 },
625
+ size: { x: 4, y: 10, z: 5 }
626
+ }
627
+ ]
628
+ }
629
+ ]
630
+ }
631
+ ]
632
+ },
633
+ {
634
+ id: 'mcu',
635
+ label: 'mcu',
636
+ color: '#2dd4bf',
637
+ children: [
638
+ {
639
+ id: 'mcu_board',
640
+ label: 'mcu board',
641
+ note: 'Above the top screens (whose PCBs end at y 119 on the other face). The OLED harness leaves through the 10 mm hole at (22, 125).',
642
+ primitives: [
643
+ {
644
+ type: primitive_type_1.default.BOX,
645
+ center: { x: -16.5, y: 130.75, z: -48.5 },
646
+ size: { x: 63, y: 25.5, z: 13 }
647
+ }
648
+ ],
649
+ children: [
650
+ {
651
+ id: 'mcu_board_mcu_usb',
652
+ label: 'MCU USB',
653
+ primitives: [
654
+ {
655
+ type: primitive_type_1.default.BOX,
656
+ center: { x: 14.5, y: 130, z: -48.5 },
657
+ size: { x: 1, y: 4, z: 9 }
658
+ }
659
+ ]
660
+ }
661
+ ]
662
+ }
663
+ ]
664
+ },
665
+ {
666
+ id: 'lora',
667
+ label: 'lora',
668
+ color: '#5fd38d',
669
+ children: [
670
+ {
671
+ id: 'lora_module',
672
+ label: 'lora module',
673
+ note: 'The breakout sits where the harness is short (2 cm to the MCU) and the pigtail is long; the antenna is where it is quiet. Nothing custom RF.',
674
+ primitives: [
675
+ {
676
+ type: primitive_type_1.default.CYLINDER,
677
+ axis: axis_1.default.Z,
678
+ center: { x: -43, y: 90, z: -53.5 },
679
+ radius: 1.5,
680
+ length: 3
681
+ },
682
+ {
683
+ type: primitive_type_1.default.CYLINDER,
684
+ axis: axis_1.default.Z,
685
+ center: { x: -22, y: 111, z: -53.5 },
686
+ radius: 1.5,
687
+ length: 3
688
+ },
689
+ {
690
+ type: primitive_type_1.default.BOX,
691
+ center: { x: -32.5, y: 100.5, z: -48.9 },
692
+ size: { x: 25, y: 25, z: 3 }
693
+ },
694
+ {
695
+ type: primitive_type_1.default.POLYLINE,
696
+ points: [
697
+ { x: -42, y: 110, z: -48 },
698
+ { x: -42, y: 40, z: -50 },
699
+ { x: -48, y: 40, z: 0 },
700
+ { x: -56, y: 50, z: 50 },
701
+ { x: -56, y: 58, z: 60 },
702
+ { x: -56, y: 60, z: 60 }
703
+ ]
704
+ }
705
+ ],
706
+ children: [
707
+ {
708
+ id: 'lora_module_sx1262_breakout',
709
+ label: 'SX1262 breakout',
710
+ note: "Waveshare Core1262-HF class, on the upstand's back face right under the MCU: x -45..-20, y 88..113, z -52..-50.4. Components face +Z.",
711
+ primitives: [
712
+ {
713
+ type: primitive_type_1.default.BOX,
714
+ center: { x: -32.5, y: 100.5, z: -51.2 },
715
+ size: { x: 25, y: 25, z: 1.6 }
716
+ }
717
+ ]
718
+ },
719
+ {
720
+ id: 'lora_module_u_fl',
721
+ label: 'U.FL',
722
+ primitives: [
723
+ {
724
+ type: primitive_type_1.default.BOX,
725
+ center: { x: -42, y: 110, z: -49.4 },
726
+ size: { x: 3, y: 3, z: 2 }
727
+ }
728
+ ]
729
+ },
730
+ {
731
+ id: 'lora_module_header_spi_busy_dio1_rst',
732
+ label: 'header (SPI, BUSY, DIO1, RST)',
733
+ primitives: [
734
+ {
735
+ type: primitive_type_1.default.BOX,
736
+ center: { x: -21, y: 100.5, z: -49.4 },
737
+ size: { x: 2, y: 20, z: 2 }
738
+ }
739
+ ]
740
+ }
741
+ ]
742
+ },
743
+ {
744
+ id: 'lora_perch',
745
+ label: 'lora perch',
746
+ note: "One standoff and one drilled corner brace replace the LoRa bracket, the deck and its posts. The brace doubles as the hood's left stop.",
747
+ primitives: [
748
+ {
749
+ type: primitive_type_1.default.CYLINDER,
750
+ axis: axis_1.default.Y,
751
+ center: { x: -62, y: 33, z: 60 },
752
+ radius: 2,
753
+ length: 60
754
+ },
755
+ {
756
+ type: primitive_type_1.default.BOX,
757
+ center: { x: -55.5, y: 64, z: 60 },
758
+ size: { x: 25, y: 2, z: 12 }
759
+ },
760
+ {
761
+ type: primitive_type_1.default.BOX,
762
+ center: { x: -67, y: 77, z: 60 },
763
+ size: { x: 2, y: 24, z: 12 }
764
+ }
765
+ ],
766
+ children: [
767
+ {
768
+ id: 'lora_perch_sma_bulkhead',
769
+ label: 'SMA bulkhead',
770
+ note: 'vertical through the brace, y 60..68',
771
+ primitives: [
772
+ {
773
+ type: primitive_type_1.default.CYLINDER,
774
+ axis: axis_1.default.Y,
775
+ center: { x: -56, y: 64, z: 60 },
776
+ radius: 3,
777
+ length: 8
778
+ }
779
+ ]
780
+ }
781
+ ]
782
+ },
783
+ {
784
+ id: 'lora_antenna',
785
+ label: 'lora antenna',
786
+ primitives: [
787
+ {
788
+ type: primitive_type_1.default.CYLINDER,
789
+ axis: axis_1.default.Y,
790
+ center: { x: -56, y: 90.5, z: 60 },
791
+ radius: 5,
792
+ length: 45
793
+ }
794
+ ]
795
+ }
796
+ ]
797
+ },
798
+ {
799
+ id: 'storage',
800
+ label: 'storage',
801
+ color: '#c084fc',
802
+ children: [
803
+ {
804
+ id: 'drive_socket',
805
+ label: 'drive socket',
806
+ note: 'Shared by both drive variants. The stick stands in it. Installed by whoever builds the kit; changed by lifting the hood.',
807
+ children: [
808
+ {
809
+ id: 'drive_socket_house_drive_socket_usb_a_faces_up',
810
+ label: 'house-drive socket (USB-A, faces up)',
811
+ note: "THE house drive's connection: the female end of the 30 cm USB 3 extension standing on the plate in the left channel at the front, x -68..-60, y 3..33, z -14..0, held by a P-clip. 1 mm to the hood wall. 126 mm from the front dipole, 67 mm from the LoRa stub. In the Wyse build the front USB 2.0 plug starts 2.5 mm behind it.",
812
+ primitives: [
813
+ {
814
+ type: primitive_type_1.default.BOX,
815
+ center: { x: -64, y: 18, z: -7 },
816
+ size: { x: 8, y: 30, z: 14 }
817
+ }
818
+ ]
819
+ }
820
+ ]
821
+ },
822
+ {
823
+ id: 'drive_stick',
824
+ label: 'drive stick',
825
+ note: 'Default build: house drive inside on the left, visitor port free at the back.',
826
+ children: [
827
+ {
828
+ id: 'drive_stick_usb_stick_128_gb_default',
829
+ label: 'USB stick, 128 GB (default)',
830
+ note: 'stands in the socket, y 33..53; a full-size stick reaches y ~78',
831
+ primitives: [
832
+ {
833
+ type: primitive_type_1.default.BOX,
834
+ center: { x: -64, y: 43, z: -7 },
835
+ size: { x: 5, y: 20, z: 12 }
836
+ }
837
+ ]
838
+ },
839
+ {
840
+ id: 'drive_stick_ext_visitor_stick',
841
+ label: 'EXT: visitor stick',
842
+ note: 'in the back socket, z 67..89, 14 mm proud of the hood',
843
+ primitives: [
844
+ {
845
+ type: primitive_type_1.default.BOX,
846
+ center: { x: 30, y: 11, z: 78 },
847
+ size: { x: 12, y: 5, z: 22 }
848
+ }
849
+ ]
850
+ }
851
+ ]
852
+ },
853
+ {
854
+ id: 'drive_ssd',
855
+ label: 'drive ssd',
856
+ note: 'Upgrade build, up to 1 TB: no internal bay. The SSD plugs into the back socket at USB 3 speed (Pi) or USB 2 speed (Wyse). The house stick inside is not fitted.',
857
+ visible: false,
858
+ primitives: [
859
+ {
860
+ type: primitive_type_1.default.POLYLINE,
861
+ points: [
862
+ { x: 30, y: 11, z: 95 },
863
+ { x: 30, y: 8, z: 101 },
864
+ { x: 30, y: 3, z: 105 },
865
+ { x: 30, y: 3, z: 106 }
866
+ ]
867
+ }
868
+ ],
869
+ children: [
870
+ {
871
+ id: 'drive_ssd_ext_usb_a_plug_ssd_cable',
872
+ label: 'EXT: USB-A plug (SSD cable)',
873
+ note: 'in the back USB 3 socket, z 67..95',
874
+ primitives: [
875
+ {
876
+ type: primitive_type_1.default.BOX,
877
+ center: { x: 30, y: 11, z: 81 },
878
+ size: { x: 12, y: 7, z: 28 }
879
+ }
880
+ ]
881
+ },
882
+ {
883
+ id: 'drive_ssd_ext_portable_ssd_t7_x9_class',
884
+ label: 'EXT: portable SSD (T7 / X9 class)',
885
+ note: 'lies on the table behind the box, on the back USB 3 socket, y -1..7, z 106..191. The house library lives OUTSIDE in this build; the visitor port is occupied, so sneakernet needs a hub.',
886
+ primitives: [
887
+ {
888
+ type: primitive_type_1.default.BOX,
889
+ center: { x: 30, y: 3, z: 148.5 },
890
+ size: { x: 57, y: 8, z: 85 }
891
+ }
892
+ ]
893
+ },
894
+ {
895
+ id: 'drive_ssd_ext_ssd_port_usb_c',
896
+ label: 'EXT: SSD port (USB-C)',
897
+ primitives: [
898
+ {
899
+ type: primitive_type_1.default.BOX,
900
+ center: { x: 30, y: 3, z: 106.5 },
901
+ size: { x: 9, y: 3, z: 1 }
902
+ }
903
+ ]
904
+ }
905
+ ]
906
+ }
907
+ ]
908
+ },
909
+ {
910
+ id: 'radio',
911
+ label: 'radio',
912
+ color: '#4aa3ff',
913
+ children: [
914
+ {
915
+ id: 'wifi_adapter_body',
916
+ label: 'wifi adapter body',
917
+ primitives: [
918
+ {
919
+ type: primitive_type_1.default.BOX,
920
+ center: { x: 55, y: 15.5, z: -7.5 },
921
+ size: { x: 15, y: 25, z: 65 }
922
+ }
923
+ ],
924
+ children: [
925
+ {
926
+ id: 'wifi_adapter_body_radio_usb',
927
+ label: 'radio USB',
928
+ note: 'USB socket on the inner (-X) face, high on the body so the cable clears the board edge',
929
+ primitives: [
930
+ {
931
+ type: primitive_type_1.default.BOX,
932
+ center: { x: 48, y: 24, z: 0 },
933
+ size: { x: 1, y: 4, z: 9 }
934
+ }
935
+ ]
936
+ }
937
+ ]
938
+ },
939
+ {
940
+ id: 'wifi_antenna_front',
941
+ label: 'wifi antenna front',
942
+ primitives: [
943
+ {
944
+ type: primitive_type_1.default.CYLINDER,
945
+ axis: axis_1.default.Z,
946
+ center: { x: 55, y: 15.5, z: -42.5 },
947
+ radius: 4,
948
+ length: 5
949
+ },
950
+ {
951
+ type: primitive_type_1.default.SPHERE,
952
+ center: { x: 55, y: 15.5, z: -48 },
953
+ radius: 4.5
954
+ },
955
+ {
956
+ type: primitive_type_1.default.CYLINDER,
957
+ axis: axis_1.default.Y,
958
+ center: { x: 55, y: 74, z: -48 },
959
+ radius: 4.5,
960
+ length: 108
961
+ }
962
+ ]
963
+ },
964
+ {
965
+ id: 'wifi_antenna_rear',
966
+ label: 'wifi antenna rear',
967
+ primitives: [
968
+ {
969
+ type: primitive_type_1.default.CYLINDER,
970
+ axis: axis_1.default.Z,
971
+ center: { x: 55, y: 15.5, z: 27.5 },
972
+ radius: 4,
973
+ length: 5
974
+ },
975
+ {
976
+ type: primitive_type_1.default.SPHERE,
977
+ center: { x: 55, y: 15.5, z: 32.5 },
978
+ radius: 4.5
979
+ },
980
+ {
981
+ type: primitive_type_1.default.CYLINDER,
982
+ axis: axis_1.default.Y,
983
+ center: { x: 55, y: 74, z: 32.5 },
984
+ radius: 4.5,
985
+ length: 108
986
+ }
987
+ ]
988
+ }
989
+ ]
990
+ },
991
+ {
992
+ id: 'board',
993
+ label: 'board',
994
+ color: '#ff6b6b',
995
+ children: [
996
+ {
997
+ id: 'board_pi',
998
+ label: 'board pi',
999
+ primitives: [
1000
+ {
1001
+ type: primitive_type_1.default.CYLINDER,
1002
+ axis: axis_1.default.Y,
1003
+ center: { x: -56.5, y: 6, z: -46.5 },
1004
+ radius: 2.5,
1005
+ length: 6
1006
+ },
1007
+ {
1008
+ type: primitive_type_1.default.CYLINDER,
1009
+ axis: axis_1.default.Y,
1010
+ center: { x: -7.5, y: 6, z: -46.5 },
1011
+ radius: 2.5,
1012
+ length: 6
1013
+ },
1014
+ {
1015
+ type: primitive_type_1.default.CYLINDER,
1016
+ axis: axis_1.default.Y,
1017
+ center: { x: -56.5, y: 6, z: 11.5 },
1018
+ radius: 2.5,
1019
+ length: 6
1020
+ },
1021
+ {
1022
+ type: primitive_type_1.default.CYLINDER,
1023
+ axis: axis_1.default.Y,
1024
+ center: { x: -7.5, y: 6, z: 11.5 },
1025
+ radius: 2.5,
1026
+ length: 6
1027
+ },
1028
+ {
1029
+ type: primitive_type_1.default.BOX,
1030
+ center: { x: -32, y: 9.8, z: -7.5 },
1031
+ size: { x: 56, y: 1.6, z: 85 }
1032
+ },
1033
+ {
1034
+ type: primitive_type_1.default.BOX,
1035
+ center: { x: -32, y: 18.1, z: -7.5 },
1036
+ size: { x: 56, y: 15, z: 85 }
1037
+ }
1038
+ ],
1039
+ children: [
1040
+ {
1041
+ id: 'board_pi_rj45',
1042
+ label: 'RJ45',
1043
+ note: '+Z edge, protrudes to z 33. Position is Pi-4 style (by the HDMI corner); on a Pi 5 it is at the other end.',
1044
+ primitives: [
1045
+ {
1046
+ type: primitive_type_1.default.BOX,
1047
+ center: { x: -50.5, y: 17.4, z: 36.5 },
1048
+ size: { x: 16, y: 13.5, z: 3 }
1049
+ }
1050
+ ]
1051
+ },
1052
+ {
1053
+ id: 'board_pi_usb_pair_a_3_0',
1054
+ label: 'USB pair A (3.0)',
1055
+ note: 'stacked USB-A pair; SSD on top, radio below',
1056
+ primitives: [
1057
+ {
1058
+ type: primitive_type_1.default.BOX,
1059
+ center: { x: -34.5, y: 18.4, z: 36.5 },
1060
+ size: { x: 13, y: 15.5, z: 3 }
1061
+ }
1062
+ ]
1063
+ },
1064
+ {
1065
+ id: 'board_pi_usb_pair_b_2_0',
1066
+ label: 'USB pair B (2.0)',
1067
+ note: 'MCU plugs in here',
1068
+ primitives: [
1069
+ {
1070
+ type: primitive_type_1.default.BOX,
1071
+ center: { x: -19.5, y: 18.4, z: 36.5 },
1072
+ size: { x: 13, y: 15.5, z: 3 }
1073
+ }
1074
+ ]
1075
+ },
1076
+ {
1077
+ id: 'board_pi_usb_c_power',
1078
+ label: 'USB-C power',
1079
+ note: '+X long edge, near the GPIO end',
1080
+ primitives: [
1081
+ {
1082
+ type: primitive_type_1.default.BOX,
1083
+ center: { x: -2.5, y: 12.2, z: -39 },
1084
+ size: { x: 3, y: 3.2, z: 9 }
1085
+ }
1086
+ ]
1087
+ },
1088
+ {
1089
+ id: 'board_pi_micro_hdmi_0',
1090
+ label: 'micro-HDMI 0',
1091
+ note: 'unused',
1092
+ primitives: [
1093
+ {
1094
+ type: primitive_type_1.default.BOX,
1095
+ center: { x: -2.5, y: 12.4, z: -25 },
1096
+ size: { x: 3, y: 3.5, z: 7 }
1097
+ }
1098
+ ]
1099
+ },
1100
+ {
1101
+ id: 'board_pi_micro_hdmi_1',
1102
+ label: 'micro-HDMI 1',
1103
+ note: 'unused',
1104
+ primitives: [
1105
+ {
1106
+ type: primitive_type_1.default.BOX,
1107
+ center: { x: -2.5, y: 12.4, z: -11.5 },
1108
+ size: { x: 3, y: 3.5, z: 7 }
1109
+ }
1110
+ ]
1111
+ }
1112
+ ]
1113
+ },
1114
+ {
1115
+ id: 'board_pi_hat',
1116
+ label: 'board pi hat',
1117
+ note: 'Optional, Pi 5 only. Top at y ~33.',
1118
+ visible: false,
1119
+ primitives: [
1120
+ {
1121
+ type: primitive_type_1.default.BOX,
1122
+ center: { x: -32, y: 28.4, z: -17.5 },
1123
+ size: { x: 56, y: 1.6, z: 65 }
1124
+ },
1125
+ {
1126
+ type: primitive_type_1.default.BOX,
1127
+ center: { x: -32, y: 31, z: -17.5 },
1128
+ size: { x: 22, y: 3, z: 42 }
1129
+ }
1130
+ ]
1131
+ },
1132
+ {
1133
+ id: 'board_wyse',
1134
+ label: 'board wyse',
1135
+ note: 'Rotated so that neither port edge faces the back: the back edge belongs to the port bracket. Left channel 11 mm to the hood wall (side-exit USB plugs); right channel 13.5 mm to the radio body (right-angle RJ45 and barrel).',
1136
+ visible: false,
1137
+ primitives: [
1138
+ {
1139
+ type: primitive_type_1.default.CYLINDER,
1140
+ axis: axis_1.default.Y,
1141
+ center: { x: 18, y: 6, z: 27 },
1142
+ radius: 2.5,
1143
+ length: 6
1144
+ },
1145
+ {
1146
+ type: primitive_type_1.default.CYLINDER,
1147
+ axis: axis_1.default.Y,
1148
+ center: { x: -42, y: 6, z: -20 },
1149
+ radius: 2.5,
1150
+ length: 6
1151
+ },
1152
+ {
1153
+ type: primitive_type_1.default.BOX,
1154
+ center: { x: -12, y: 9.8, z: -3 },
1155
+ size: { x: 92, y: 1.6, z: 92 }
1156
+ },
1157
+ {
1158
+ type: primitive_type_1.default.BOX,
1159
+ center: { x: -12, y: 18.6, z: -3 },
1160
+ size: { x: 92, y: 16, z: 92 }
1161
+ }
1162
+ ],
1163
+ children: [
1164
+ {
1165
+ id: 'board_wyse_barrel_4_0x1_7_5_v_or_12_v',
1166
+ label: 'barrel 4.0x1.7 (5 V or 12 V)',
1167
+ note: 'REAR edge, now the +X edge, x 34..36. Port order along the edge is ESTIMATED.',
1168
+ primitives: [
1169
+ {
1170
+ type: primitive_type_1.default.BOX,
1171
+ center: { x: 35, y: 14, z: -38 },
1172
+ size: { x: 2, y: 8, z: 8 }
1173
+ }
1174
+ ]
1175
+ },
1176
+ {
1177
+ id: 'board_wyse_rj45',
1178
+ label: 'RJ45',
1179
+ primitives: [
1180
+ {
1181
+ type: primitive_type_1.default.BOX,
1182
+ center: { x: 35, y: 17.4, z: -18 },
1183
+ size: { x: 2, y: 13.5, z: 16 }
1184
+ }
1185
+ ]
1186
+ },
1187
+ {
1188
+ id: 'board_wyse_displayport_1',
1189
+ label: 'DisplayPort 1',
1190
+ note: 'unused',
1191
+ primitives: [
1192
+ {
1193
+ type: primitive_type_1.default.BOX,
1194
+ center: { x: 35, y: 14, z: 3 },
1195
+ size: { x: 2, y: 6, z: 16 }
1196
+ }
1197
+ ]
1198
+ },
1199
+ {
1200
+ id: 'board_wyse_displayport_2',
1201
+ label: 'DisplayPort 2',
1202
+ note: 'unused',
1203
+ primitives: [
1204
+ {
1205
+ type: primitive_type_1.default.BOX,
1206
+ center: { x: 35, y: 14, z: 21 },
1207
+ size: { x: 2, y: 6, z: 16 }
1208
+ }
1209
+ ]
1210
+ },
1211
+ {
1212
+ id: 'board_wyse_usb_2_0_x2_rear_stacked',
1213
+ label: 'USB 2.0 x2 (rear, stacked)',
1214
+ note: 'house drive below, visitor port above',
1215
+ primitives: [
1216
+ {
1217
+ type: primitive_type_1.default.BOX,
1218
+ center: { x: 35, y: 18, z: 37 },
1219
+ size: { x: 2, y: 15, z: 12 }
1220
+ }
1221
+ ]
1222
+ },
1223
+ {
1224
+ id: 'board_wyse_usb_3_0_front',
1225
+ label: 'USB 3.0 (front)',
1226
+ note: 'FRONT edge, now the -X edge, x -60..-58. The only USB 3: radio goes here.',
1227
+ primitives: [
1228
+ {
1229
+ type: primitive_type_1.default.BOX,
1230
+ center: { x: -59, y: 14.5, z: 27 },
1231
+ size: { x: 2, y: 7.5, z: 13 }
1232
+ }
1233
+ ]
1234
+ },
1235
+ {
1236
+ id: 'board_wyse_usb_2_0_front',
1237
+ label: 'USB 2.0 (front)',
1238
+ note: 'MCU plugs in here',
1239
+ primitives: [
1240
+ {
1241
+ type: primitive_type_1.default.BOX,
1242
+ center: { x: -59, y: 14.5, z: 9 },
1243
+ size: { x: 2, y: 7.5, z: 13 }
1244
+ }
1245
+ ]
1246
+ },
1247
+ {
1248
+ id: 'board_wyse_audio',
1249
+ label: 'audio',
1250
+ note: 'unused',
1251
+ primitives: [
1252
+ {
1253
+ type: primitive_type_1.default.BOX,
1254
+ center: { x: -59, y: 14, z: -7 },
1255
+ size: { x: 2, y: 6, z: 6 }
1256
+ }
1257
+ ]
1258
+ }
1259
+ ]
1260
+ }
1261
+ ]
1262
+ },
1263
+ {
1264
+ id: 'cables',
1265
+ label: 'cables',
1266
+ color: '#f5e27a',
1267
+ children: [
1268
+ {
1269
+ id: 'cables_pi',
1270
+ label: 'cables pi',
1271
+ note: 'Follows board_pi. USB 3 pair A: visitor/external drive + radio. USB 2 pair B: MCU + house stick.',
1272
+ primitives: [
1273
+ {
1274
+ type: primitive_type_1.default.POLYLINE,
1275
+ points: [
1276
+ { x: -50.5, y: 17.4, z: 58 },
1277
+ { x: -50.5, y: 17.4, z: 60 },
1278
+ { x: -45, y: 30, z: 59 },
1279
+ { x: 0, y: 30, z: 54 },
1280
+ { x: 8, y: 30, z: 48 },
1281
+ { x: 8, y: 11, z: 45 }
1282
+ ]
1283
+ },
1284
+ {
1285
+ type: primitive_type_1.default.POLYLINE,
1286
+ points: [
1287
+ { x: 8, y: 12.2, z: -39 },
1288
+ { x: 16, y: 11, z: -32 },
1289
+ { x: 20, y: 7, z: -22 },
1290
+ { x: 40, y: 6, z: -22 },
1291
+ { x: 40, y: 6, z: 30 },
1292
+ { x: 40, y: 8, z: 36 },
1293
+ { x: 40, y: 10, z: 40 },
1294
+ { x: 46, y: 10, z: 44 },
1295
+ { x: 50, y: 11, z: 47 }
1296
+ ]
1297
+ },
1298
+ {
1299
+ type: primitive_type_1.default.POLYLINE,
1300
+ points: [
1301
+ { x: -34.5, y: 22.3, z: 56 },
1302
+ { x: -34.5, y: 22.3, z: 59 },
1303
+ { x: -10, y: 26, z: 59 },
1304
+ { x: 22, y: 26, z: 55 },
1305
+ { x: 30, y: 26, z: 50 },
1306
+ { x: 30, y: 23, z: 48 }
1307
+ ]
1308
+ },
1309
+ {
1310
+ type: primitive_type_1.default.POLYLINE,
1311
+ points: [
1312
+ { x: -34.5, y: 14.5, z: 56 },
1313
+ { x: -34.5, y: 14.5, z: 59 },
1314
+ { x: -30, y: 32, z: 60 },
1315
+ { x: 44, y: 32, z: 60 },
1316
+ { x: 44, y: 24, z: 0 },
1317
+ { x: 47.5, y: 24, z: 0 }
1318
+ ]
1319
+ },
1320
+ {
1321
+ type: primitive_type_1.default.POLYLINE,
1322
+ points: [
1323
+ { x: 14.5, y: 130, z: -48.5 },
1324
+ { x: 18, y: 128, z: -51 },
1325
+ { x: 18, y: 40, z: -52 },
1326
+ { x: -5, y: 36, z: -45 },
1327
+ { x: -5, y: 36, z: 56 },
1328
+ { x: -19.5, y: 30, z: 59 },
1329
+ { x: -19.5, y: 22.3, z: 59 },
1330
+ { x: -19.5, y: 22.3, z: 56 }
1331
+ ]
1332
+ },
1333
+ {
1334
+ type: primitive_type_1.default.POLYLINE,
1335
+ points: [
1336
+ { x: -19.5, y: 14.5, z: 56 },
1337
+ { x: -19.5, y: 14.5, z: 59 },
1338
+ { x: -40, y: 30, z: 60 },
1339
+ { x: -57, y: 32, z: 54 },
1340
+ { x: -64, y: 30, z: 40 },
1341
+ { x: -64, y: 5, z: 36 },
1342
+ { x: -64, y: 5, z: 0 }
1343
+ ]
1344
+ }
1345
+ ],
1346
+ children: [
1347
+ {
1348
+ id: 'cables_pi_rj45_plug_straight',
1349
+ label: 'RJ45 plug (straight)',
1350
+ note: "z 38..58; 11 mm to the hood's back wall",
1351
+ primitives: [
1352
+ {
1353
+ type: primitive_type_1.default.BOX,
1354
+ center: { x: -50.5, y: 17.4, z: 48 },
1355
+ size: { x: 14, y: 12, z: 20 }
1356
+ }
1357
+ ]
1358
+ },
1359
+ {
1360
+ id: 'cables_pi_usb_c_plug_right_angle',
1361
+ label: 'USB-C plug (right-angle)',
1362
+ note: 'x -1..8, z -45..-33',
1363
+ primitives: [
1364
+ {
1365
+ type: primitive_type_1.default.BOX,
1366
+ center: { x: 3.5, y: 12.2, z: -39 },
1367
+ size: { x: 9, y: 6.5, z: 12 }
1368
+ }
1369
+ ]
1370
+ },
1371
+ {
1372
+ id: 'cables_pi_usb_a_plug_visitor_external_drive',
1373
+ label: 'USB-A plug (visitor / external drive)',
1374
+ note: 'top of pair A (USB 3.0), z 38..56',
1375
+ primitives: [
1376
+ {
1377
+ type: primitive_type_1.default.BOX,
1378
+ center: { x: -34.5, y: 22.3, z: 47 },
1379
+ size: { x: 12, y: 6.5, z: 18 }
1380
+ }
1381
+ ]
1382
+ },
1383
+ {
1384
+ id: 'cables_pi_usb_a_plug_radio',
1385
+ label: 'USB-A plug (radio)',
1386
+ note: 'bottom of pair A (USB 3.0), z 38..56',
1387
+ primitives: [
1388
+ {
1389
+ type: primitive_type_1.default.BOX,
1390
+ center: { x: -34.5, y: 14.5, z: 47 },
1391
+ size: { x: 12, y: 6.5, z: 18 }
1392
+ }
1393
+ ]
1394
+ },
1395
+ {
1396
+ id: 'cables_pi_usb_a_plug_mcu',
1397
+ label: 'USB-A plug (MCU)',
1398
+ note: 'top of pair B (USB 2.0), z 38..56',
1399
+ primitives: [
1400
+ {
1401
+ type: primitive_type_1.default.BOX,
1402
+ center: { x: -19.5, y: 22.3, z: 47 },
1403
+ size: { x: 12, y: 6.5, z: 18 }
1404
+ }
1405
+ ]
1406
+ },
1407
+ {
1408
+ id: 'cables_pi_usb_a_plug_house_stick_extension',
1409
+ label: 'USB-A plug (house stick extension)',
1410
+ note: 'bottom of pair B (USB 2.0): a stick is happy at 480 Mb/s, the USB 3 ports go to the radio and the visitor socket',
1411
+ primitives: [
1412
+ {
1413
+ type: primitive_type_1.default.BOX,
1414
+ center: { x: -19.5, y: 14.5, z: 47 },
1415
+ size: { x: 12, y: 6.5, z: 18 }
1416
+ }
1417
+ ]
1418
+ }
1419
+ ]
1420
+ },
1421
+ {
1422
+ id: 'cables_wyse',
1423
+ label: 'cables wyse',
1424
+ note: 'Follows board_wyse (rotated). Right-angle plugs everywhere. The single USB 3.0 goes to the radio; the house stick and the visitor/external drive ride USB 2.0.',
1425
+ visible: false,
1426
+ primitives: [
1427
+ {
1428
+ type: primitive_type_1.default.POLYLINE,
1429
+ points: [
1430
+ { x: 41, y: 24, z: -18 },
1431
+ { x: 41, y: 30, z: -18 },
1432
+ { x: 41, y: 32, z: 28 },
1433
+ { x: 22, y: 32, z: 42 },
1434
+ { x: 8, y: 14, z: 45 },
1435
+ { x: 8, y: 11, z: 45 }
1436
+ ]
1437
+ },
1438
+ {
1439
+ type: primitive_type_1.default.POLYLINE,
1440
+ points: [
1441
+ { x: 40, y: 14, z: -34 },
1442
+ { x: 44, y: 8, z: -28 },
1443
+ { x: 44, y: 6, z: 36 },
1444
+ { x: 44, y: 10, z: 40 },
1445
+ { x: 46, y: 10, z: 44 },
1446
+ { x: 50, y: 11, z: 47 }
1447
+ ]
1448
+ },
1449
+ {
1450
+ type: primitive_type_1.default.POLYLINE,
1451
+ points: [
1452
+ { x: 40, y: 14.5, z: 31 },
1453
+ { x: 40, y: 14.5, z: 28 },
1454
+ { x: 40, y: 36, z: 26 },
1455
+ { x: -40, y: 36, z: 40 },
1456
+ { x: -62, y: 36, z: 38 },
1457
+ { x: -64, y: 20, z: 37 },
1458
+ { x: -64, y: 5, z: 36 },
1459
+ { x: -64, y: 5, z: 0 }
1460
+ ]
1461
+ },
1462
+ {
1463
+ type: primitive_type_1.default.POLYLINE,
1464
+ points: [
1465
+ { x: 40, y: 25, z: 37 },
1466
+ { x: 40, y: 28, z: 44 },
1467
+ { x: 34, y: 27, z: 50 },
1468
+ { x: 30, y: 26, z: 50 },
1469
+ { x: 30, y: 23, z: 48 }
1470
+ ]
1471
+ },
1472
+ {
1473
+ type: primitive_type_1.default.POLYLINE,
1474
+ points: [
1475
+ { x: -63, y: 14.5, z: 20.5 },
1476
+ { x: -63, y: 14.5, z: 18 },
1477
+ { x: -63, y: 30, z: 17 },
1478
+ { x: -50, y: 36, z: 10 },
1479
+ { x: 40, y: 36, z: 44 },
1480
+ { x: 44, y: 30, z: 20 },
1481
+ { x: 44, y: 24, z: 0 },
1482
+ { x: 47.5, y: 24, z: 0 }
1483
+ ]
1484
+ },
1485
+ {
1486
+ type: primitive_type_1.default.POLYLINE,
1487
+ points: [
1488
+ { x: 14.5, y: 130, z: -48.5 },
1489
+ { x: 18, y: 128, z: -51 },
1490
+ { x: 18, y: 40, z: -52 },
1491
+ { x: -55, y: 36, z: -52 },
1492
+ { x: -57, y: 36, z: -30 },
1493
+ { x: -61, y: 28, z: 20 },
1494
+ { x: -63, y: 14.5, z: 15.5 }
1495
+ ]
1496
+ }
1497
+ ],
1498
+ children: [
1499
+ {
1500
+ id: 'cables_wyse_rj45_plug_right_angle_up',
1501
+ label: 'RJ45 plug (right-angle, up)',
1502
+ note: 'x 36..46; 1.5 mm to the radio body: TIGHT',
1503
+ primitives: [
1504
+ {
1505
+ type: primitive_type_1.default.BOX,
1506
+ center: { x: 41, y: 17.4, z: -18 },
1507
+ size: { x: 10, y: 13, z: 16 }
1508
+ }
1509
+ ]
1510
+ },
1511
+ {
1512
+ id: 'cables_wyse_barrel_plug_right_angle',
1513
+ label: 'barrel plug (right-angle)',
1514
+ note: 'x 36..44',
1515
+ primitives: [
1516
+ {
1517
+ type: primitive_type_1.default.BOX,
1518
+ center: { x: 40, y: 14, z: -38 },
1519
+ size: { x: 8, y: 8, z: 8 }
1520
+ }
1521
+ ]
1522
+ },
1523
+ {
1524
+ id: 'cables_wyse_usb_a_plug_house_stick_right_angle_side_exit',
1525
+ label: 'USB-A plug (house stick, right-angle, side-exit)',
1526
+ note: 'lower rear USB 2.0; cable exits toward -Z',
1527
+ primitives: [
1528
+ {
1529
+ type: primitive_type_1.default.BOX,
1530
+ center: { x: 40, y: 14.5, z: 37 },
1531
+ size: { x: 8, y: 7, z: 12 }
1532
+ }
1533
+ ]
1534
+ },
1535
+ {
1536
+ id: 'cables_wyse_usb_a_plug_visitor_external_drive_right_angle_up',
1537
+ label: 'USB-A plug (visitor / external drive, right-angle, up)',
1538
+ note: "upper rear USB 2.0: the Wyse's external drive runs at 480 Mb/s",
1539
+ primitives: [
1540
+ {
1541
+ type: primitive_type_1.default.BOX,
1542
+ center: { x: 40, y: 21.5, z: 37 },
1543
+ size: { x: 8, y: 7, z: 12 }
1544
+ }
1545
+ ]
1546
+ },
1547
+ {
1548
+ id: 'cables_wyse_usb_a_plug_radio_right_angle_side_exit',
1549
+ label: 'USB-A plug (radio, right-angle, side-exit)',
1550
+ note: 'front USB 3.0, now facing -X; x -66..-60, 3 mm to the hood wall: TIGHT. Cable exits toward -Z.',
1551
+ primitives: [
1552
+ {
1553
+ type: primitive_type_1.default.BOX,
1554
+ center: { x: -63, y: 14.5, z: 27 },
1555
+ size: { x: 6, y: 7, z: 13 }
1556
+ }
1557
+ ]
1558
+ },
1559
+ {
1560
+ id: 'cables_wyse_usb_a_plug_mcu_right_angle_side_exit',
1561
+ label: 'USB-A plug (MCU, right-angle, side-exit)',
1562
+ note: 'front USB 2.0; cable exits toward +Z; 2.5 mm behind the house-drive socket',
1563
+ primitives: [
1564
+ {
1565
+ type: primitive_type_1.default.BOX,
1566
+ center: { x: -63, y: 14.5, z: 9 },
1567
+ size: { x: 6, y: 7, z: 13 }
1568
+ }
1569
+ ]
1570
+ }
1571
+ ]
1572
+ },
1573
+ {
1574
+ id: 'exterior',
1575
+ label: 'exterior',
1576
+ note: "What the household sees at the back: three sockets in a row along the bottom edge. The USB socket's occupant is drawn by the drive variant.",
1577
+ children: [
1578
+ {
1579
+ id: 'exterior_ext_wan_cable_to_ont_modem',
1580
+ label: 'EXT: WAN cable to ONT / modem',
1581
+ primitives: [
1582
+ {
1583
+ type: primitive_type_1.default.BOX,
1584
+ center: { x: 8, y: 11, z: 74 },
1585
+ size: { x: 12, y: 6, z: 14 }
1586
+ }
1587
+ ]
1588
+ },
1589
+ {
1590
+ id: 'exterior_ext_power_brick_cable',
1591
+ label: 'EXT: power brick cable',
1592
+ primitives: [
1593
+ {
1594
+ type: primitive_type_1.default.BOX,
1595
+ center: { x: 50, y: 11, z: 74 },
1596
+ size: { x: 8, y: 6, z: 14 }
1597
+ }
1598
+ ]
1599
+ }
1600
+ ]
1601
+ },
1602
+ {
1603
+ id: 'harness_mcu',
1604
+ label: 'harness mcu',
1605
+ note: "Low-speed signal wiring from the MCU. The OLED runs live in the 6 mm standoff gap between the upstand's front face and the modules' component side; the LoRa run is 2 cm on the back face.",
1606
+ primitives: [
1607
+ {
1608
+ type: primitive_type_1.default.POLYLINE,
1609
+ points: [
1610
+ { x: 0, y: 125, z: -44 },
1611
+ { x: 20, y: 125, z: -50 },
1612
+ { x: 22, y: 125, z: -56 },
1613
+ { x: 22, y: 125, z: -58.5 },
1614
+ { x: 38, y: 104, z: -58.5 },
1615
+ { x: 40, y: 100.5, z: -58 }
1616
+ ]
1617
+ },
1618
+ {
1619
+ type: primitive_type_1.default.POLYLINE,
1620
+ points: [
1621
+ { x: 22, y: 125, z: -58.5 },
1622
+ { x: -36, y: 122, z: -58.5 },
1623
+ { x: -40, y: 104, z: -58.5 },
1624
+ { x: -40, y: 100.5, z: -58 }
1625
+ ]
1626
+ },
1627
+ {
1628
+ type: primitive_type_1.default.POLYLINE,
1629
+ points: [
1630
+ { x: 22, y: 125, z: -58.5 },
1631
+ { x: 48.5, y: 118, z: -58.5 },
1632
+ { x: 48.5, y: 64, z: -58.5 },
1633
+ { x: 40, y: 60.5, z: -58 }
1634
+ ]
1635
+ },
1636
+ {
1637
+ type: primitive_type_1.default.POLYLINE,
1638
+ points: [
1639
+ { x: 22, y: 125, z: -58.5 },
1640
+ { x: -47, y: 120, z: -58.5 },
1641
+ { x: -48.5, y: 110, z: -58.5 },
1642
+ { x: -48.5, y: 64, z: -58.5 },
1643
+ { x: -40, y: 60.5, z: -58 }
1644
+ ]
1645
+ },
1646
+ {
1647
+ type: primitive_type_1.default.POLYLINE,
1648
+ points: [
1649
+ { x: -10, y: 118, z: -46 },
1650
+ { x: -12, y: 110, z: -48 },
1651
+ { x: -19, y: 100.5, z: -49 }
1652
+ ]
1653
+ }
1654
+ ]
1655
+ }
1656
+ ]
1657
+ },
1658
+ {
1659
+ id: 'hood',
1660
+ label: 'hood',
1661
+ color: '#b08a5a',
1662
+ alpha: 0.45,
1663
+ children: [
1664
+ {
1665
+ id: 'hood_front',
1666
+ label: 'hood front',
1667
+ primitives: [
1668
+ {
1669
+ type: primitive_type_1.default.BOX,
1670
+ center: { x: 0, y: 80.5, z: -72 },
1671
+ size: { x: 150, y: 150, z: 6 }
1672
+ }
1673
+ ],
1674
+ children: [
1675
+ {
1676
+ id: 'hood_front_openings',
1677
+ label: 'openings',
1678
+ primitives: [
1679
+ {
1680
+ type: primitive_type_1.default.OPENING,
1681
+ shape: opening_shape_1.default.RECTANGLE,
1682
+ plane: plane_1.default.XY,
1683
+ center: { x: -20, y: 100.5, z: -72 },
1684
+ depth: 6,
1685
+ width: 32,
1686
+ height: 32
1687
+ },
1688
+ {
1689
+ type: primitive_type_1.default.OPENING,
1690
+ shape: opening_shape_1.default.RECTANGLE,
1691
+ plane: plane_1.default.XY,
1692
+ center: { x: 20, y: 100.5, z: -72 },
1693
+ depth: 6,
1694
+ width: 32,
1695
+ height: 32
1696
+ },
1697
+ {
1698
+ type: primitive_type_1.default.OPENING,
1699
+ shape: opening_shape_1.default.RECTANGLE,
1700
+ plane: plane_1.default.XY,
1701
+ center: { x: -20, y: 60.5, z: -72 },
1702
+ depth: 6,
1703
+ width: 32,
1704
+ height: 32
1705
+ },
1706
+ {
1707
+ type: primitive_type_1.default.OPENING,
1708
+ shape: opening_shape_1.default.RECTANGLE,
1709
+ plane: plane_1.default.XY,
1710
+ center: { x: 20, y: 60.5, z: -72 },
1711
+ depth: 6,
1712
+ width: 32,
1713
+ height: 32
1714
+ }
1715
+ ]
1716
+ }
1717
+ ]
1718
+ },
1719
+ {
1720
+ id: 'hood_back',
1721
+ label: 'hood back',
1722
+ primitives: [
1723
+ {
1724
+ type: primitive_type_1.default.BOX,
1725
+ center: { x: 0, y: 80.5, z: 72 },
1726
+ size: { x: 150, y: 150, z: 6 }
1727
+ }
1728
+ ],
1729
+ children: [
1730
+ {
1731
+ id: 'hood_back_openings',
1732
+ label: 'openings',
1733
+ primitives: [
1734
+ {
1735
+ type: primitive_type_1.default.OPENING,
1736
+ shape: opening_shape_1.default.RECTANGLE,
1737
+ plane: plane_1.default.XY,
1738
+ center: { x: 28, y: 20.5, z: 72 },
1739
+ depth: 6,
1740
+ width: 64,
1741
+ height: 30
1742
+ }
1743
+ ]
1744
+ }
1745
+ ]
1746
+ },
1747
+ {
1748
+ id: 'hood_left',
1749
+ label: 'hood left',
1750
+ primitives: [
1751
+ {
1752
+ type: primitive_type_1.default.BOX,
1753
+ center: { x: -72, y: 80.5, z: 0 },
1754
+ size: { x: 6, y: 150, z: 138 }
1755
+ }
1756
+ ]
1757
+ },
1758
+ {
1759
+ id: 'hood_right',
1760
+ label: 'hood right',
1761
+ primitives: [
1762
+ {
1763
+ type: primitive_type_1.default.BOX,
1764
+ center: { x: 72, y: 80.5, z: 0 },
1765
+ size: { x: 6, y: 150, z: 138 }
1766
+ }
1767
+ ]
1768
+ },
1769
+ {
1770
+ id: 'hood_roof',
1771
+ label: 'hood roof',
1772
+ primitives: [
1773
+ {
1774
+ type: primitive_type_1.default.BOX,
1775
+ center: { x: 0, y: 152.5, z: 0 },
1776
+ size: { x: 150, y: 6, z: 150 }
1777
+ }
1778
+ ],
1779
+ children: [
1780
+ {
1781
+ id: 'hood_roof_openings',
1782
+ label: 'openings',
1783
+ primitives: [
1784
+ {
1785
+ type: primitive_type_1.default.OPENING,
1786
+ shape: opening_shape_1.default.CIRCLE,
1787
+ plane: plane_1.default.XZ,
1788
+ center: { x: -40, y: 152.5, z: -40 },
1789
+ depth: 6,
1790
+ radius: 5
1791
+ },
1792
+ {
1793
+ type: primitive_type_1.default.OPENING,
1794
+ shape: opening_shape_1.default.CIRCLE,
1795
+ plane: plane_1.default.XZ,
1796
+ center: { x: -40, y: 152.5, z: -24 },
1797
+ depth: 6,
1798
+ radius: 5
1799
+ },
1800
+ {
1801
+ type: primitive_type_1.default.OPENING,
1802
+ shape: opening_shape_1.default.CIRCLE,
1803
+ plane: plane_1.default.XZ,
1804
+ center: { x: -40, y: 152.5, z: -8 },
1805
+ depth: 6,
1806
+ radius: 5
1807
+ },
1808
+ {
1809
+ type: primitive_type_1.default.OPENING,
1810
+ shape: opening_shape_1.default.CIRCLE,
1811
+ plane: plane_1.default.XZ,
1812
+ center: { x: -40, y: 152.5, z: 8 },
1813
+ depth: 6,
1814
+ radius: 5
1815
+ },
1816
+ {
1817
+ type: primitive_type_1.default.OPENING,
1818
+ shape: opening_shape_1.default.CIRCLE,
1819
+ plane: plane_1.default.XZ,
1820
+ center: { x: -40, y: 152.5, z: 24 },
1821
+ depth: 6,
1822
+ radius: 5
1823
+ },
1824
+ {
1825
+ type: primitive_type_1.default.OPENING,
1826
+ shape: opening_shape_1.default.CIRCLE,
1827
+ plane: plane_1.default.XZ,
1828
+ center: { x: -40, y: 152.5, z: 40 },
1829
+ depth: 6,
1830
+ radius: 5
1831
+ },
1832
+ {
1833
+ type: primitive_type_1.default.OPENING,
1834
+ shape: opening_shape_1.default.CIRCLE,
1835
+ plane: plane_1.default.XZ,
1836
+ center: { x: -24, y: 152.5, z: -40 },
1837
+ depth: 6,
1838
+ radius: 5
1839
+ },
1840
+ {
1841
+ type: primitive_type_1.default.OPENING,
1842
+ shape: opening_shape_1.default.CIRCLE,
1843
+ plane: plane_1.default.XZ,
1844
+ center: { x: -24, y: 152.5, z: -24 },
1845
+ depth: 6,
1846
+ radius: 5
1847
+ },
1848
+ {
1849
+ type: primitive_type_1.default.OPENING,
1850
+ shape: opening_shape_1.default.CIRCLE,
1851
+ plane: plane_1.default.XZ,
1852
+ center: { x: -24, y: 152.5, z: -8 },
1853
+ depth: 6,
1854
+ radius: 5
1855
+ },
1856
+ {
1857
+ type: primitive_type_1.default.OPENING,
1858
+ shape: opening_shape_1.default.CIRCLE,
1859
+ plane: plane_1.default.XZ,
1860
+ center: { x: -24, y: 152.5, z: 8 },
1861
+ depth: 6,
1862
+ radius: 5
1863
+ },
1864
+ {
1865
+ type: primitive_type_1.default.OPENING,
1866
+ shape: opening_shape_1.default.CIRCLE,
1867
+ plane: plane_1.default.XZ,
1868
+ center: { x: -24, y: 152.5, z: 24 },
1869
+ depth: 6,
1870
+ radius: 5
1871
+ },
1872
+ {
1873
+ type: primitive_type_1.default.OPENING,
1874
+ shape: opening_shape_1.default.CIRCLE,
1875
+ plane: plane_1.default.XZ,
1876
+ center: { x: -24, y: 152.5, z: 40 },
1877
+ depth: 6,
1878
+ radius: 5
1879
+ },
1880
+ {
1881
+ type: primitive_type_1.default.OPENING,
1882
+ shape: opening_shape_1.default.CIRCLE,
1883
+ plane: plane_1.default.XZ,
1884
+ center: { x: -8, y: 152.5, z: -40 },
1885
+ depth: 6,
1886
+ radius: 5
1887
+ },
1888
+ {
1889
+ type: primitive_type_1.default.OPENING,
1890
+ shape: opening_shape_1.default.CIRCLE,
1891
+ plane: plane_1.default.XZ,
1892
+ center: { x: -8, y: 152.5, z: -24 },
1893
+ depth: 6,
1894
+ radius: 5
1895
+ },
1896
+ {
1897
+ type: primitive_type_1.default.OPENING,
1898
+ shape: opening_shape_1.default.CIRCLE,
1899
+ plane: plane_1.default.XZ,
1900
+ center: { x: -8, y: 152.5, z: -8 },
1901
+ depth: 6,
1902
+ radius: 5
1903
+ },
1904
+ {
1905
+ type: primitive_type_1.default.OPENING,
1906
+ shape: opening_shape_1.default.CIRCLE,
1907
+ plane: plane_1.default.XZ,
1908
+ center: { x: -8, y: 152.5, z: 8 },
1909
+ depth: 6,
1910
+ radius: 5
1911
+ },
1912
+ {
1913
+ type: primitive_type_1.default.OPENING,
1914
+ shape: opening_shape_1.default.CIRCLE,
1915
+ plane: plane_1.default.XZ,
1916
+ center: { x: -8, y: 152.5, z: 24 },
1917
+ depth: 6,
1918
+ radius: 5
1919
+ },
1920
+ {
1921
+ type: primitive_type_1.default.OPENING,
1922
+ shape: opening_shape_1.default.CIRCLE,
1923
+ plane: plane_1.default.XZ,
1924
+ center: { x: -8, y: 152.5, z: 40 },
1925
+ depth: 6,
1926
+ radius: 5
1927
+ },
1928
+ {
1929
+ type: primitive_type_1.default.OPENING,
1930
+ shape: opening_shape_1.default.CIRCLE,
1931
+ plane: plane_1.default.XZ,
1932
+ center: { x: 8, y: 152.5, z: -40 },
1933
+ depth: 6,
1934
+ radius: 5
1935
+ },
1936
+ {
1937
+ type: primitive_type_1.default.OPENING,
1938
+ shape: opening_shape_1.default.CIRCLE,
1939
+ plane: plane_1.default.XZ,
1940
+ center: { x: 8, y: 152.5, z: -24 },
1941
+ depth: 6,
1942
+ radius: 5
1943
+ },
1944
+ {
1945
+ type: primitive_type_1.default.OPENING,
1946
+ shape: opening_shape_1.default.CIRCLE,
1947
+ plane: plane_1.default.XZ,
1948
+ center: { x: 8, y: 152.5, z: -8 },
1949
+ depth: 6,
1950
+ radius: 5
1951
+ },
1952
+ {
1953
+ type: primitive_type_1.default.OPENING,
1954
+ shape: opening_shape_1.default.CIRCLE,
1955
+ plane: plane_1.default.XZ,
1956
+ center: { x: 8, y: 152.5, z: 8 },
1957
+ depth: 6,
1958
+ radius: 5
1959
+ },
1960
+ {
1961
+ type: primitive_type_1.default.OPENING,
1962
+ shape: opening_shape_1.default.CIRCLE,
1963
+ plane: plane_1.default.XZ,
1964
+ center: { x: 8, y: 152.5, z: 24 },
1965
+ depth: 6,
1966
+ radius: 5
1967
+ },
1968
+ {
1969
+ type: primitive_type_1.default.OPENING,
1970
+ shape: opening_shape_1.default.CIRCLE,
1971
+ plane: plane_1.default.XZ,
1972
+ center: { x: 8, y: 152.5, z: 40 },
1973
+ depth: 6,
1974
+ radius: 5
1975
+ },
1976
+ {
1977
+ type: primitive_type_1.default.OPENING,
1978
+ shape: opening_shape_1.default.CIRCLE,
1979
+ plane: plane_1.default.XZ,
1980
+ center: { x: 24, y: 152.5, z: -40 },
1981
+ depth: 6,
1982
+ radius: 5
1983
+ },
1984
+ {
1985
+ type: primitive_type_1.default.OPENING,
1986
+ shape: opening_shape_1.default.CIRCLE,
1987
+ plane: plane_1.default.XZ,
1988
+ center: { x: 24, y: 152.5, z: -24 },
1989
+ depth: 6,
1990
+ radius: 5
1991
+ },
1992
+ {
1993
+ type: primitive_type_1.default.OPENING,
1994
+ shape: opening_shape_1.default.CIRCLE,
1995
+ plane: plane_1.default.XZ,
1996
+ center: { x: 24, y: 152.5, z: -8 },
1997
+ depth: 6,
1998
+ radius: 5
1999
+ },
2000
+ {
2001
+ type: primitive_type_1.default.OPENING,
2002
+ shape: opening_shape_1.default.CIRCLE,
2003
+ plane: plane_1.default.XZ,
2004
+ center: { x: 24, y: 152.5, z: 8 },
2005
+ depth: 6,
2006
+ radius: 5
2007
+ },
2008
+ {
2009
+ type: primitive_type_1.default.OPENING,
2010
+ shape: opening_shape_1.default.CIRCLE,
2011
+ plane: plane_1.default.XZ,
2012
+ center: { x: 24, y: 152.5, z: 24 },
2013
+ depth: 6,
2014
+ radius: 5
2015
+ },
2016
+ {
2017
+ type: primitive_type_1.default.OPENING,
2018
+ shape: opening_shape_1.default.CIRCLE,
2019
+ plane: plane_1.default.XZ,
2020
+ center: { x: 24, y: 152.5, z: 40 },
2021
+ depth: 6,
2022
+ radius: 5
2023
+ },
2024
+ {
2025
+ type: primitive_type_1.default.OPENING,
2026
+ shape: opening_shape_1.default.CIRCLE,
2027
+ plane: plane_1.default.XZ,
2028
+ center: { x: 40, y: 152.5, z: -40 },
2029
+ depth: 6,
2030
+ radius: 5
2031
+ },
2032
+ {
2033
+ type: primitive_type_1.default.OPENING,
2034
+ shape: opening_shape_1.default.CIRCLE,
2035
+ plane: plane_1.default.XZ,
2036
+ center: { x: 40, y: 152.5, z: -24 },
2037
+ depth: 6,
2038
+ radius: 5
2039
+ },
2040
+ {
2041
+ type: primitive_type_1.default.OPENING,
2042
+ shape: opening_shape_1.default.CIRCLE,
2043
+ plane: plane_1.default.XZ,
2044
+ center: { x: 40, y: 152.5, z: -8 },
2045
+ depth: 6,
2046
+ radius: 5
2047
+ },
2048
+ {
2049
+ type: primitive_type_1.default.OPENING,
2050
+ shape: opening_shape_1.default.CIRCLE,
2051
+ plane: plane_1.default.XZ,
2052
+ center: { x: 40, y: 152.5, z: 8 },
2053
+ depth: 6,
2054
+ radius: 5
2055
+ },
2056
+ {
2057
+ type: primitive_type_1.default.OPENING,
2058
+ shape: opening_shape_1.default.CIRCLE,
2059
+ plane: plane_1.default.XZ,
2060
+ center: { x: 40, y: 152.5, z: 24 },
2061
+ depth: 6,
2062
+ radius: 5
2063
+ },
2064
+ {
2065
+ type: primitive_type_1.default.OPENING,
2066
+ shape: opening_shape_1.default.CIRCLE,
2067
+ plane: plane_1.default.XZ,
2068
+ center: { x: 40, y: 152.5, z: 40 },
2069
+ depth: 6,
2070
+ radius: 5
2071
+ }
2072
+ ]
2073
+ }
2074
+ ]
2075
+ }
2076
+ ]
2077
+ }
2078
+ ]
2079
+ };
2080
+ exports.default = HOUSE_COMPUTER_SCENE;
2081
+ //# sourceMappingURL=house-computer.js.map