@fbincon/claude-code-statusline 3.3.0 → 3.5.0

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (161) hide show
  1. package/README.md +78 -73
  2. package/candidate.json +291 -215
  3. package/node_modules/@fbincon/statusline-cli/dist/src/config/operations.js +5 -0
  4. package/node_modules/@fbincon/statusline-cli/dist/src/config/operations.js.map +1 -1
  5. package/node_modules/@fbincon/statusline-cli/dist/src/config/profile-command.d.ts +12 -0
  6. package/node_modules/@fbincon/statusline-cli/dist/src/config/profile-command.js +101 -0
  7. package/node_modules/@fbincon/statusline-cli/dist/src/config/profile-command.js.map +1 -0
  8. package/node_modules/@fbincon/statusline-cli/dist/src/config/profiles.d.ts +54 -0
  9. package/node_modules/@fbincon/statusline-cli/dist/src/config/profiles.js +199 -0
  10. package/node_modules/@fbincon/statusline-cli/dist/src/config/profiles.js.map +1 -0
  11. package/node_modules/@fbincon/statusline-cli/dist/src/config/service.d.ts +2 -0
  12. package/node_modules/@fbincon/statusline-cli/dist/src/config/service.js +19 -1
  13. package/node_modules/@fbincon/statusline-cli/dist/src/config/service.js.map +1 -1
  14. package/node_modules/@fbincon/statusline-cli/dist/src/config/transfer.d.ts +1 -0
  15. package/node_modules/@fbincon/statusline-cli/dist/src/config/transfer.js +4 -1
  16. package/node_modules/@fbincon/statusline-cli/dist/src/config/transfer.js.map +1 -1
  17. package/node_modules/@fbincon/statusline-cli/dist/src/diagnostics/command.js +9 -2
  18. package/node_modules/@fbincon/statusline-cli/dist/src/diagnostics/command.js.map +1 -1
  19. package/node_modules/@fbincon/statusline-cli/dist/src/diagnostics/service.d.ts +8 -2
  20. package/node_modules/@fbincon/statusline-cli/dist/src/diagnostics/service.js +6 -3
  21. package/node_modules/@fbincon/statusline-cli/dist/src/diagnostics/service.js.map +1 -1
  22. package/node_modules/@fbincon/statusline-cli/dist/src/help.js +14 -2
  23. package/node_modules/@fbincon/statusline-cli/dist/src/help.js.map +1 -1
  24. package/node_modules/@fbincon/statusline-cli/dist/src/integration/arguments.js +1 -1
  25. package/node_modules/@fbincon/statusline-cli/dist/src/integration/arguments.js.map +1 -1
  26. package/node_modules/@fbincon/statusline-cli/dist/src/integration/configure.d.ts +2 -1
  27. package/node_modules/@fbincon/statusline-cli/dist/src/integration/configure.js +3 -1
  28. package/node_modules/@fbincon/statusline-cli/dist/src/integration/configure.js.map +1 -1
  29. package/node_modules/@fbincon/statusline-cli/dist/src/integration/install.js +6 -1
  30. package/node_modules/@fbincon/statusline-cli/dist/src/integration/install.js.map +1 -1
  31. package/node_modules/@fbincon/statusline-cli/dist/src/integration/model.d.ts +2 -0
  32. package/node_modules/@fbincon/statusline-cli/dist/src/integration/setup-service.d.ts +23 -0
  33. package/node_modules/@fbincon/statusline-cli/dist/src/integration/setup-service.js +168 -0
  34. package/node_modules/@fbincon/statusline-cli/dist/src/integration/setup-service.js.map +1 -0
  35. package/node_modules/@fbincon/statusline-cli/dist/src/integration/setup.d.ts +3 -0
  36. package/node_modules/@fbincon/statusline-cli/dist/src/integration/setup.js +64 -0
  37. package/node_modules/@fbincon/statusline-cli/dist/src/integration/setup.js.map +1 -0
  38. package/node_modules/@fbincon/statusline-cli/dist/src/main.js +35 -9
  39. package/node_modules/@fbincon/statusline-cli/dist/src/main.js.map +1 -1
  40. package/node_modules/@fbincon/statusline-cli/dist/src/recovery/journal.js +1 -1
  41. package/node_modules/@fbincon/statusline-cli/dist/src/recovery/journal.js.map +1 -1
  42. package/node_modules/@fbincon/statusline-cli/dist/src/rendering/configuration.d.ts +12 -0
  43. package/node_modules/@fbincon/statusline-cli/dist/src/rendering/configuration.js +59 -0
  44. package/node_modules/@fbincon/statusline-cli/dist/src/rendering/configuration.js.map +1 -0
  45. package/node_modules/@fbincon/statusline-cli/dist/src/rendering/main.js +15 -2
  46. package/node_modules/@fbincon/statusline-cli/dist/src/rendering/main.js.map +1 -1
  47. package/node_modules/@fbincon/statusline-cli/dist/src/tasks/command.d.ts +3 -0
  48. package/node_modules/@fbincon/statusline-cli/dist/src/tasks/command.js +25 -0
  49. package/node_modules/@fbincon/statusline-cli/dist/src/tasks/command.js.map +1 -0
  50. package/node_modules/@fbincon/statusline-cli/dist/src/tasks/service.d.ts +4 -0
  51. package/node_modules/@fbincon/statusline-cli/dist/src/tasks/service.js +93 -0
  52. package/node_modules/@fbincon/statusline-cli/dist/src/tasks/service.js.map +1 -0
  53. package/node_modules/@fbincon/statusline-cli/dist/src/ui/protocol.d.ts +5 -3
  54. package/node_modules/@fbincon/statusline-cli/dist/src/ui/protocol.js +34 -8
  55. package/node_modules/@fbincon/statusline-cli/dist/src/ui/protocol.js.map +1 -1
  56. package/node_modules/@fbincon/statusline-cli/resources/statusline-config/SKILL.md +5 -0
  57. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/.claude-plugin/plugin.json +1 -1
  58. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/hooks/register.ts +89 -3
  59. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/backend.ts +61 -7
  60. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/client/keys.ts +8 -1
  61. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/client/settings.ts +1 -0
  62. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/editor/draft.ts +2 -0
  63. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/editor/profile-manager.ts +258 -0
  64. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/editor/quick-setup.ts +14 -11
  65. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/editor/setup.ts +60 -0
  66. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/editor/task-detail.ts +27 -0
  67. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/generated-contracts.ts +552 -6
  68. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/i18n/generated-locales.ts +1194 -6
  69. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/lib/session.ts +2 -1
  70. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/resource-manifest.json +18 -15
  71. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/ui/client/draw.ts +7 -3
  72. package/node_modules/@fbincon/statusline-cli/resources/statusline-native/ui/client/help.ts +1 -0
  73. package/node_modules/@fbincon/statusline-cli/resources/statusline-runtime/.claude-plugin/plugin.json +1 -1
  74. package/node_modules/@fbincon/statusline-cli/resources/statusline-runtime/resource-manifest.json +3 -3
  75. package/node_modules/@fbincon/statusline-core/dist/src/config/defaults.d.ts +1 -0
  76. package/node_modules/@fbincon/statusline-core/dist/src/config/defaults.js +5 -2
  77. package/node_modules/@fbincon/statusline-core/dist/src/config/defaults.js.map +1 -1
  78. package/node_modules/@fbincon/statusline-core/dist/src/config/display.d.ts +1 -1
  79. package/node_modules/@fbincon/statusline-core/dist/src/config/display.js +12 -10
  80. package/node_modules/@fbincon/statusline-core/dist/src/config/display.js.map +1 -1
  81. package/node_modules/@fbincon/statusline-core/dist/src/config/formatting.d.ts +3 -0
  82. package/node_modules/@fbincon/statusline-core/dist/src/config/formatting.js +11 -0
  83. package/node_modules/@fbincon/statusline-core/dist/src/config/formatting.js.map +1 -1
  84. package/node_modules/@fbincon/statusline-core/dist/src/config/presets.d.ts +4 -0
  85. package/node_modules/@fbincon/statusline-core/dist/src/config/presets.js +37 -3
  86. package/node_modules/@fbincon/statusline-core/dist/src/config/presets.js.map +1 -1
  87. package/node_modules/@fbincon/statusline-core/dist/src/config/profiles.d.ts +16 -0
  88. package/node_modules/@fbincon/statusline-core/dist/src/config/profiles.js +69 -0
  89. package/node_modules/@fbincon/statusline-core/dist/src/config/profiles.js.map +1 -0
  90. package/node_modules/@fbincon/statusline-core/dist/src/contracts/generated-catalog.d.ts +24 -0
  91. package/node_modules/@fbincon/statusline-core/dist/src/contracts/generated-catalog.js +1 -1
  92. package/node_modules/@fbincon/statusline-core/dist/src/contracts/generated-catalog.js.map +1 -1
  93. package/node_modules/@fbincon/statusline-core/dist/src/contracts/ui.d.ts +212 -4
  94. package/node_modules/@fbincon/statusline-core/dist/src/contracts/ui.js +485 -2
  95. package/node_modules/@fbincon/statusline-core/dist/src/contracts/ui.js.map +1 -1
  96. package/node_modules/@fbincon/statusline-core/dist/src/editor/backend.js +78 -7
  97. package/node_modules/@fbincon/statusline-core/dist/src/editor/backend.js.map +1 -1
  98. package/node_modules/@fbincon/statusline-core/dist/src/editor/draft.d.ts +2 -0
  99. package/node_modules/@fbincon/statusline-core/dist/src/editor/draft.js +1 -0
  100. package/node_modules/@fbincon/statusline-core/dist/src/editor/draft.js.map +1 -1
  101. package/node_modules/@fbincon/statusline-core/dist/src/editor/profile-manager.d.ts +63 -0
  102. package/node_modules/@fbincon/statusline-core/dist/src/editor/profile-manager.js +355 -0
  103. package/node_modules/@fbincon/statusline-core/dist/src/editor/profile-manager.js.map +1 -0
  104. package/node_modules/@fbincon/statusline-core/dist/src/editor/quick-setup.d.ts +4 -4
  105. package/node_modules/@fbincon/statusline-core/dist/src/editor/quick-setup.js +16 -9
  106. package/node_modules/@fbincon/statusline-core/dist/src/editor/quick-setup.js.map +1 -1
  107. package/node_modules/@fbincon/statusline-core/dist/src/editor/setup.d.ts +30 -0
  108. package/node_modules/@fbincon/statusline-core/dist/src/editor/setup.js +96 -0
  109. package/node_modules/@fbincon/statusline-core/dist/src/editor/setup.js.map +1 -0
  110. package/node_modules/@fbincon/statusline-core/dist/src/editor/task-detail.d.ts +4 -0
  111. package/node_modules/@fbincon/statusline-core/dist/src/editor/task-detail.js +25 -0
  112. package/node_modules/@fbincon/statusline-core/dist/src/editor/task-detail.js.map +1 -0
  113. package/node_modules/@fbincon/statusline-core/dist/src/i18n/generated-locales.d.ts +1188 -0
  114. package/node_modules/@fbincon/statusline-core/dist/src/i18n/generated-locales.js +1194 -6
  115. package/node_modules/@fbincon/statusline-core/dist/src/i18n/generated-locales.js.map +1 -1
  116. package/node_modules/@fbincon/statusline-core/dist/src/release.d.ts +1 -1
  117. package/node_modules/@fbincon/statusline-core/dist/src/release.js +1 -1
  118. package/node_modules/@fbincon/statusline-core/dist/src/rendering/appearance.d.ts +3 -1
  119. package/node_modules/@fbincon/statusline-core/dist/src/rendering/appearance.js +24 -2
  120. package/node_modules/@fbincon/statusline-core/dist/src/rendering/appearance.js.map +1 -1
  121. package/node_modules/@fbincon/statusline-core/dist/src/rendering/components.d.ts +3 -1
  122. package/node_modules/@fbincon/statusline-core/dist/src/rendering/components.js +18 -5
  123. package/node_modules/@fbincon/statusline-core/dist/src/rendering/components.js.map +1 -1
  124. package/node_modules/@fbincon/statusline-core/dist/src/rendering/items.js +4 -4
  125. package/node_modules/@fbincon/statusline-core/dist/src/rendering/items.js.map +1 -1
  126. package/node_modules/@fbincon/statusline-core/dist/src/rendering/powerline.d.ts +15 -5
  127. package/node_modules/@fbincon/statusline-core/dist/src/rendering/powerline.js +78 -48
  128. package/node_modules/@fbincon/statusline-core/dist/src/rendering/powerline.js.map +1 -1
  129. package/node_modules/@fbincon/statusline-core/dist/src/rendering/preferences.js +6 -0
  130. package/node_modules/@fbincon/statusline-core/dist/src/rendering/preferences.js.map +1 -1
  131. package/node_modules/@fbincon/statusline-core/dist/src/rendering/subagents.js +3 -3
  132. package/node_modules/@fbincon/statusline-core/dist/src/rendering/subagents.js.map +1 -1
  133. package/node_modules/@fbincon/statusline-core/dist/src/runtime/tasks/details.d.ts +24 -0
  134. package/node_modules/@fbincon/statusline-core/dist/src/runtime/tasks/details.js +153 -0
  135. package/node_modules/@fbincon/statusline-core/dist/src/runtime/tasks/details.js.map +1 -0
  136. package/node_modules/@fbincon/statusline-core/resources/i18n/locales/en.json +199 -1
  137. package/node_modules/@fbincon/statusline-core/resources/i18n/locales/ja.json +199 -1
  138. package/node_modules/@fbincon/statusline-core/resources/i18n/locales/ko.json +199 -1
  139. package/node_modules/@fbincon/statusline-core/resources/i18n/locales/zh-CN.json +199 -1
  140. package/node_modules/@fbincon/statusline-core/resources/i18n/locales/zh-HK.json +199 -1
  141. package/node_modules/@fbincon/statusline-core/resources/i18n/locales/zh-TW.json +199 -1
  142. package/node_modules/@fbincon/statusline-platform/dist/src/project-paths.d.ts +8 -0
  143. package/node_modules/@fbincon/statusline-platform/dist/src/project-paths.js +41 -0
  144. package/node_modules/@fbincon/statusline-platform/dist/src/project-paths.js.map +1 -0
  145. package/node_modules/@fbincon/statusline-tui/dist/src/drawing/pages.js +6 -1
  146. package/node_modules/@fbincon/statusline-tui/dist/src/drawing/pages.js.map +1 -1
  147. package/node_modules/@fbincon/statusline-tui/dist/src/drawing/presentation.js +2 -0
  148. package/node_modules/@fbincon/statusline-tui/dist/src/drawing/presentation.js.map +1 -1
  149. package/node_modules/@fbincon/statusline-tui/dist/src/drawing/shortcuts.js +2 -0
  150. package/node_modules/@fbincon/statusline-tui/dist/src/drawing/shortcuts.js.map +1 -1
  151. package/node_modules/@fbincon/statusline-tui/dist/src/drawing.js +3 -2
  152. package/node_modules/@fbincon/statusline-tui/dist/src/drawing.js.map +1 -1
  153. package/node_modules/@fbincon/statusline-tui/dist/src/session.js +7 -3
  154. package/node_modules/@fbincon/statusline-tui/dist/src/session.js.map +1 -1
  155. package/node_modules/@fbincon/statusline-tui/dist/src/setup.d.ts +12 -0
  156. package/node_modules/@fbincon/statusline-tui/dist/src/setup.js +75 -0
  157. package/node_modules/@fbincon/statusline-tui/dist/src/setup.js.map +1 -0
  158. package/node_modules/@fbincon/statusline-tui/dist/src/state.d.ts +1 -1
  159. package/node_modules/@fbincon/statusline-tui/dist/src/state.js +18 -2
  160. package/node_modules/@fbincon/statusline-tui/dist/src/state.js.map +1 -1
  161. package/package.json +1 -1
@@ -1505,5 +1505,203 @@
1505
1505
  "diagnose.error.required": "--input FILE または --input - を指定してください。",
1506
1506
  "diagnose.error.file": "入力ファイルがありません: {value}",
1507
1507
  "diagnose.error.size": "診断入力が32 MiBを超えています。",
1508
- "diagnose.error.read": "診断入力を読み取れません。"
1508
+ "diagnose.error.read": "診断入力を読み取れません。",
1509
+ "profiles.title": "表示プロファイルとプロジェクト",
1510
+ "profiles.user": "ユーザーの既定",
1511
+ "profiles.target": "編集:{name} · ルート {root} · {count} 件の関連付け",
1512
+ "profiles.resolution": "プロファイル:{name};ルート:{root};選択理由:{reason}",
1513
+ "profiles.empty": "保存済みの項目はありません。",
1514
+ "profiles.sample": "サンプル表示 · 選択では保存されません",
1515
+ "profiles.saved": "保存しました。現在の編集中の内容は保持されます。",
1516
+ "profiles.unchanged": "変更はありません。",
1517
+ "profiles.loading": "読み込み中…",
1518
+ "profiles.refresh": "更新",
1519
+ "profiles.required": "空でない値を入力してください。",
1520
+ "profiles.field.name": "名前",
1521
+ "profiles.field.path": "パス",
1522
+ "profiles.form_help": "Enter 次へ/確認 · Tab 項目 · Ctrl+G 戻る",
1523
+ "profiles.navigation": "↑↓ 選択 · Enter 開く/確定 · R 更新 · Ctrl+G 戻る",
1524
+ "profiles.confirm": "この変更を保存",
1525
+ "profiles.cancel": "キャンセル",
1526
+ "profiles.save": "下書きを保存して切り替え",
1527
+ "profiles.discard": "下書きを破棄して切り替え",
1528
+ "profiles.dirty": "未保存の変更があります。切り替え方法を選んでください。",
1529
+ "profiles.shared": "保存すると関連付けられた {count} 件のプロジェクトに反映されます。",
1530
+ "profiles.import_review": "表示設定のみを読み込みました。サンプルを確認して名前を付けて保存してください。",
1531
+ "profiles.overwrite": "既存の項目があります。上書きを確認するかキャンセルしてください。",
1532
+ "profiles.uncertain": "保存結果が不明です。R で保存状態を確認してください。",
1533
+ "profiles.review_saved": "保存状態を再読込しました。次の変更前に確認してください。下書きは保持されています。",
1534
+ "profiles.invalid_draft": "無効な項目を修正してから保存してください。",
1535
+ "profiles.failed": "操作に失敗しました:{value}",
1536
+ "profiles.help": "プロファイルは表示設定のみです。既定への適用はコピー、プロジェクトへの関連付けは共有です。",
1537
+ "profiles.action.edit": "選択したプロファイルを編集",
1538
+ "profiles.action.activate": "既定の下書きに読込・保存して適用",
1539
+ "profiles.action.save": "現在の表示に名前を付けて保存…",
1540
+ "profiles.action.save_bind": "現在の表示を別名保存して関連付け…",
1541
+ "profiles.action.rename": "選択したプロファイルの名前を変更",
1542
+ "profiles.action.delete": "選択したプロファイルを削除",
1543
+ "profiles.action.bind": "プロジェクトを選択中のプロファイルに関連付け",
1544
+ "profiles.action.unbind": "プロジェクトの関連付けを解除",
1545
+ "profiles.action.import": "表示プロファイルをインポート",
1546
+ "profiles.action.export": "選択したプロファイルをエクスポート",
1547
+ "profiles.error.name": "名前は制御文字なしの 1~128 文字で入力してください。",
1548
+ "profiles.error.invalid": "プロファイル一覧または要求が無効です。既存ファイルは保持されました。",
1549
+ "profiles.error.duplicate": "同名のプロファイル {value} があります。上書きの確認が必要です。",
1550
+ "profiles.error.missing": "プロファイルが見つかりません:{value}",
1551
+ "profiles.error.format": "バージョン 1 の表示プロファイルが必要です。ポータブル設定ファイルとは別形式です。",
1552
+ "profiles.error.conflict": "設定が別の操作で変更されました。再読込して確認してください。",
1553
+ "profiles.error.path": "存在するプロジェクトディレクトリを選んでください。",
1554
+ "profiles.error.bound": "プロジェクト {value} は別のプロファイルに関連付けられています。置換の確認が必要です。",
1555
+ "profiles.error.referenced": "プロファイル {value} を削除する前にプロジェクトの関連付けを解除してください。",
1556
+ "profiles.error.size": "プロファイルのファイルサイズが上限を超えています。",
1557
+ "profiles.error.file": "プロファイルファイルを読み込めません:{value}",
1558
+ "profiles.error.width": "プレビュー幅は 2~10000 の整数にしてください。",
1559
+ "profiles.reason.user_default": "ユーザーの既定",
1560
+ "profiles.reason.profile": "一致するプロファイル",
1561
+ "profiles.reason.unbound": "関連付けなし・ユーザーの既定を使用",
1562
+ "profiles.reason.path_unavailable": "ディレクトリを確認できないため既定を使用",
1563
+ "profiles.reason.missing_profile": "関連付け先がないため既定を使用",
1564
+ "profiles.reason.ambiguous_binding": "関連付けが競合するため既定を使用",
1565
+ "profiles.reason.invalid_collection": "一覧が無効なため既定を使用",
1566
+ "task.title": "タスクの詳細",
1567
+ "task.unknown": "不明",
1568
+ "task.close": "閉じる",
1569
+ "task.readonly": "読み取り専用 · 手動更新",
1570
+ "task.session": "セッション:{value}",
1571
+ "task.prompt": "タスク ID:{value}",
1572
+ "task.captured": "読取時刻:{value}",
1573
+ "task.status": "観測状態:{value};段階:{phase}",
1574
+ "task.elapsed": "タスクの合計時間:{value}",
1575
+ "task.active": "証拠で確認できる稼働時間:{value}",
1576
+ "task.progress": "チェックリスト完了数/合計:{value}",
1577
+ "task.agents": "帰属を確認できるエージェント",
1578
+ "task.sources": "証拠と対象範囲",
1579
+ "task.evidence": "{source} · {scope} · {status} · {time} · {freshness}",
1580
+ "task.fallback": "Claude のターミナルで開くか、claude-statusline task show --session-id ID を実行してください。",
1581
+ "task.help": "指定セッションの既存の観測を読みます。収集や状態修復は行いません。",
1582
+ "task.error.input": "有効なセッション ID と、必要ならプロンプト ID またはエージェントのスナップショットを指定してください。",
1583
+ "task.limit.independent_snapshots": "各ソースは独立したスナップショットであり、同時点の完全な履歴ではありません。",
1584
+ "task.limit.ambiguous_current_task": "現在のタスクの参照が一致せず、推測していません。",
1585
+ "task.limit.no_current_task": "現在のタスクを明確に確認できません。",
1586
+ "task.limit.ambiguous_owner": "タスクまたはエージェントの帰属が不明です。",
1587
+ "task.limit.missing_start": "タスク開始を観測していません。",
1588
+ "task.limit.elapsed_unavailable": "現在の証拠では合計時間を確認できません。",
1589
+ "task.limit.parent_not_observed": "一部の親エージェントの関係は未観測です。",
1590
+ "task.limit.ambiguous_parent": "矛盾する親情報を階層の構築に使用していません。",
1591
+ "settings.profiles": "表示プロファイルとプロジェクト",
1592
+ "ui.actions.profiles": "表示プロファイルとプロジェクト",
1593
+ "cli.help.display_profiles": "表示プロファイルとプロジェクト",
1594
+ "cli.help.project_bindings": "表示プロファイルとプロジェクト",
1595
+ "cli.help.task_details": "タスクの詳細",
1596
+ "task.value.observed": "観測済み",
1597
+ "task.value.not_observed": "未観測",
1598
+ "task.value.partial": "部分的な観測",
1599
+ "task.value.stale": "古い観測",
1600
+ "task.value.invalid_field": "無効なフィールド",
1601
+ "task.value.session_mismatch": "セッションまたは記録の不一致",
1602
+ "task.value.source_unavailable": "ソース利用不可",
1603
+ "task.value.newer_than_input": "入力より新しい観測",
1604
+ "task.value.association_unavailable": "関連付け不可",
1605
+ "task.value.prompt_mismatch": "プロンプトの不一致",
1606
+ "task.value.current": "ソースの鮮度基準内",
1607
+ "task.value.unknown": "不明",
1608
+ "task.limit.native_timing_disabled": "ネイティブ計時は無効です",
1609
+ "task.value.native_timing_disabled": "ネイティブ計時は無効です",
1610
+ "task.limit.runtime_disabled": "ライブ指標は無効です",
1611
+ "task.value.runtime_disabled": "ライブ指標は無効です",
1612
+ "task.limit.incomplete": "確認範囲が不完全です",
1613
+ "task.value.incomplete": "確認範囲が不完全です",
1614
+ "task.limit.abnormal_clock": "時計の証拠を信頼できません",
1615
+ "task.value.abnormal_clock": "時計の証拠を信頼できません",
1616
+ "task.limit.not_observed": "未観測",
1617
+ "task.limit.stale": "古い観測",
1618
+ "task.limit.wait_coverage_missing": "待機の証拠が不完全です",
1619
+ "task.value.wait_coverage_missing": "待機の証拠が不完全です",
1620
+ "task.limit.task_not_observed": "未観測",
1621
+ "task.value.running": "実行中",
1622
+ "task.value.waiting": "待機中",
1623
+ "task.value.completed": "完了",
1624
+ "task.value.failed": "失敗",
1625
+ "task.value.interrupted": "中断",
1626
+ "task.value.pending": "保留",
1627
+ "task.value.idle": "待機",
1628
+ "task.value.killed": "停止",
1629
+ "task.value.main": "メイン実行",
1630
+ "task.value.waiting_subagents": "エージェントを待機",
1631
+ "task.value.resuming_main": "メインの仕上げ",
1632
+ "task.value.stop_pending": "停止確認待ち",
1633
+ "task.value.queued": "キュー待ち",
1634
+ "task.value.waiting agents": "エージェントを待機",
1635
+ "task.value.main wrap-up": "メインの仕上げ",
1636
+ "errors.powerline.value": "無効な Powerline オプション:{field}",
1637
+ "fields.global.powerline.padding.label": "ブロックの余白(各側1文字)",
1638
+ "fields.global.powerline.separator.label": "ブロック区切りの形",
1639
+ "fields.global.powerline.start_cap.label": "先頭の装飾",
1640
+ "fields.global.powerline.end_cap.label": "末尾の装飾",
1641
+ "fields.global.powerline.color_mode.label": "行をまたぐブロック配色",
1642
+ "quick.copy": "名前を付けてコピーを保存",
1643
+ "quick.purpose.daily-development": "日常開発 — コンパクトな完成済み設定",
1644
+ "quick.purpose.agent-focus": "マルチエージェント — 失敗を見逃さない",
1645
+ "quick.purpose.quota-watch": "使用枠の監視 — 使用量とリセット",
1646
+ "quick.requirements.daily-development": "Claude 入力、ローカル Git、タスク時間を使用。費用は2行目で有効化できます。選択しても収集は有効になりません。",
1647
+ "quick.requirements.agent-focus": "エージェント行には対応する Claude 入力が必要です。状態・進捗・数には別途ライブ指標が必要です。タスク時間とエージェント経過時間の範囲は異なります。完了は隠し、失敗は表示します。",
1648
+ "quick.requirements.quota-watch": "観測済みの使用枠とリセット情報が必要です。欠落・期限切れはゼロとせず省略します。費用とキャッシュは入力がある場合のみ表示。収集は有効化しません。",
1649
+ "values.left": "左",
1650
+ "values.right": "右",
1651
+ "values.both": "両側",
1652
+ "values.arrow": "矢印",
1653
+ "values.slash": "斜線",
1654
+ "values.bar": "縦線",
1655
+ "values.semantic": "項目の意味に応じる",
1656
+ "values.continuous": "行をまたいで継続",
1657
+ "values.restart": "行ごとにリセット",
1658
+ "cli.help.guided_setup": "状態表示を確認・プレビュー・接続",
1659
+ "setup.title": "ステータスライン設定",
1660
+ "setup.checks": "1. 環境と設定の確認",
1661
+ "setup.choice": "2. 表示を選択",
1662
+ "setup.quick": "3. プリセットと外観",
1663
+ "setup.review": "4. 適用前の確認",
1664
+ "setup.continue": "続ける",
1665
+ "setup.blocked": "保存前にエラーを解決してください。Esc で終了",
1666
+ "setup.integration_blocked": "接続できません — 先に確認事項を解決",
1667
+ "setup.keep": "現在の表示/既定値を維持",
1668
+ "setup.choose": "プリセットを選んでプレビュー",
1669
+ "setup.integrate": "表示を保存して Claude に接続",
1670
+ "setup.save": "表示のみ保存",
1671
+ "setup.cancel": "キャンセル",
1672
+ "setup.sample": "固定サンプル — 実セッションの表示は未確認",
1673
+ "setup.resource": "変更予定のリソース",
1674
+ "setup.keys": "上下で選択 · Enter 次へ · Backspace 戻る · PgUp/PgDn 詳細 · Tab 表示 · L 言語(保存) · Esc 中止",
1675
+ "setup.small": "64列×18行以上に広げてください。Esc で中止。",
1676
+ "setup.review_note": "表示の保存と接続は別々に確定します。ホスト設定と収集設定は維持します。スクロールして変更を確認してください。",
1677
+ "setup.language_failed": "言語を保存できませんでした。以前の言語を維持します。",
1678
+ "setup.node": "Node {version}、対応範囲:{supported}",
1679
+ "setup.host": "Claude {version}。接続には確認済みバージョン 2.1.205 以上が必要です。未対応機能は停止を維持します。",
1680
+ "setup.directory": "設定場所にアクセス可能:{path}(読み取り専用の権限確認)",
1681
+ "setup.target": "対象:{path} のユーザー既定値。保存済み {profiles} 設定と {bindings} プロジェクト関連付けを維持します。",
1682
+ "setup.bound_project": "このプロジェクトは {path} の {name} を使用中。既定値を変更しても関連付けは変わりません。",
1683
+ "setup.display_valid": "表示・設定・プロファイルのファイルは有効です",
1684
+ "setup.preferences": "維持する設定:ネイティブ編集 {native}、外部編集 {external}、ネイティブ計時 {timing}、ライブ指標 {live}。",
1685
+ "setup.plugins": "ネイティブ編集の接続:{native}。公式プラグイン操作は適用後に実行。再起動後の確認は未実施です。",
1686
+ "setup.ownership": "インストール事前確認完了。変更はありません",
1687
+ "setup.conflict": "確認後に設定が変わりました。setup を再実行して確認してください。",
1688
+ "setup.integration_failed": "接続が完了していません。プラグイン状態を確認してください。",
1689
+ "setup.verification_failed": "書き込んだリソースがすべての検査に合格していません。",
1690
+ "setup.tty": "対話設定には端末が必要です。読み取り専用の setup --dry-run または次のコマンドを使用してください:",
1691
+ "setup.dry_run": "読み取り専用の確認。プリセット選択やファイル作成は行いません。",
1692
+ "setup.steps": "手順:確認 → 維持/選択 → プレビュー → 確認 → 明示的に保存/接続 → リソース検証 → Claude を再起動して実表示を確認。",
1693
+ "setup.cancelled": "適用前に中止しました。表示と接続は未変更。明示的に保存したUI言語は維持します。",
1694
+ "setup.committed_display": "表示の保存が完了しました。",
1695
+ "setup.committed_integration": "接続操作が終了しました。リソースを確認します。",
1696
+ "setup.stage_review": "表示の保存前",
1697
+ "setup.stage_display": "表示は保存済み。接続は未完了の可能性あり",
1698
+ "setup.stage_integration": "接続操作終了",
1699
+ "setup.stage_verified": "リソース確認済み",
1700
+ "setup.partial": "停止段階:{stage}。全体の取り消しは行っていません。doctor を確認し、未完了トランザクションは recover で処理してから setup を再実行してください。",
1701
+ "setup.success": "リソース確認完了。Claude を再起動して実表示を確認してください。続きの編集は /statusline-config または configure を使用します。",
1702
+ "setup.saved_only": "表示を保存しました。接続は未適用です。Claude に接続する際は setup を再実行してください。",
1703
+ "setup.value.requested": "有効化を要求",
1704
+ "setup.value.disabled": "無効",
1705
+ "setup.value.suspended": "停止中",
1706
+ "setup.value.unknown": "不明"
1509
1707
  }
@@ -1505,5 +1505,203 @@
1505
1505
  "diagnose.error.required": "--input FILE 또는 --input -를 지정하세요.",
1506
1506
  "diagnose.error.file": "입력 파일이 없습니다: {value}",
1507
1507
  "diagnose.error.size": "진단 입력이 32 MiB를 초과합니다.",
1508
- "diagnose.error.read": "진단 입력을 읽을 수 없습니다."
1508
+ "diagnose.error.read": "진단 입력을 읽을 수 없습니다.",
1509
+ "profiles.title": "표시 프로필 및 프로젝트",
1510
+ "profiles.user": "사용자 기본값",
1511
+ "profiles.target": "편집: {name} · 루트 {root} · 연결 {count}개",
1512
+ "profiles.resolution": "프로필: {name}; 루트: {root}; 선택 이유: {reason}",
1513
+ "profiles.empty": "저장된 항목이 없습니다.",
1514
+ "profiles.sample": "샘플 미리 보기 · 선택만으로 저장되지 않습니다",
1515
+ "profiles.saved": "저장했습니다. 현재 편집 초안은 유지됩니다.",
1516
+ "profiles.unchanged": "변경 사항이 없습니다.",
1517
+ "profiles.loading": "불러오는 중…",
1518
+ "profiles.refresh": "새로 고침",
1519
+ "profiles.required": "값을 입력하세요.",
1520
+ "profiles.field.name": "이름",
1521
+ "profiles.field.path": "경로",
1522
+ "profiles.form_help": "Enter 다음/검토 · Tab 필드 · Ctrl+G 뒤로",
1523
+ "profiles.navigation": "↑↓ 선택 · Enter 열기/확인 · R 새로 고침 · Ctrl+G 뒤로",
1524
+ "profiles.confirm": "이 변경 사항 저장",
1525
+ "profiles.cancel": "취소",
1526
+ "profiles.save": "초안을 저장하고 전환",
1527
+ "profiles.discard": "초안을 버리고 전환",
1528
+ "profiles.dirty": "저장하지 않은 변경 사항이 있습니다. 전환 방법을 선택하세요.",
1529
+ "profiles.shared": "저장하면 연결된 프로젝트 {count}개에 이 프로필의 변경 사항이 적용됩니다.",
1530
+ "profiles.import_review": "표시 설정만 가져왔습니다. 샘플을 검토한 후 이름을 지정해 저장하세요.",
1531
+ "profiles.overwrite": "기존 항목이 있습니다. 덮어쓰기를 확인하거나 취소하세요.",
1532
+ "profiles.uncertain": "저장 결과를 알 수 없습니다. R을 눌러 저장된 상태를 확인하세요.",
1533
+ "profiles.review_saved": "저장된 상태를 다시 불러왔습니다. 다시 변경하기 전에 확인하세요. 초안은 유지됩니다.",
1534
+ "profiles.invalid_draft": "잘못된 필드를 수정한 후 저장하세요.",
1535
+ "profiles.failed": "작업 실패: {value}",
1536
+ "profiles.help": "프로필에는 표시 설정만 포함됩니다. 기본값으로 활성화하면 복사본을 만들고, 프로젝트에 연결하면 프로필을 공유합니다.",
1537
+ "profiles.action.edit": "선택한 프로필 편집",
1538
+ "profiles.action.activate": "기본 초안으로 불러오기 · 저장 후 적용",
1539
+ "profiles.action.save": "현재 표시를 다른 이름으로 저장…",
1540
+ "profiles.action.save_bind": "현재 표시를 다른 이름으로 저장하고 연결…",
1541
+ "profiles.action.rename": "선택한 프로필 이름 바꾸기",
1542
+ "profiles.action.delete": "선택한 프로필 삭제",
1543
+ "profiles.action.bind": "프로젝트를 선택한 프로필에 연결",
1544
+ "profiles.action.unbind": "프로젝트 연결 해제",
1545
+ "profiles.action.import": "표시 프로필 가져오기",
1546
+ "profiles.action.export": "선택한 프로필 내보내기",
1547
+ "profiles.error.name": "이름은 제어 문자 없이 1~128자로 입력하세요.",
1548
+ "profiles.error.invalid": "프로필 모음 또는 요청이 잘못되었습니다. 기존 파일은 유지됩니다.",
1549
+ "profiles.error.duplicate": "프로필 {value}이(가) 이미 있습니다. 덮어쓰기를 명시적으로 확인하세요.",
1550
+ "profiles.error.missing": "프로필을 찾을 수 없습니다: {value}",
1551
+ "profiles.error.format": "버전 1 표시 프로필 파일이 필요합니다. 포터블 설정 파일과는 별도 형식입니다.",
1552
+ "profiles.error.conflict": "다른 작업에서 설정을 변경했습니다. 다시 불러와 검토한 후 저장하세요.",
1553
+ "profiles.error.path": "존재하는 프로젝트 디렉터리를 선택하세요.",
1554
+ "profiles.error.bound": "프로젝트 {value}은(는) 다른 프로필에 연결되어 있습니다. 교체를 명시적으로 확인하세요.",
1555
+ "profiles.error.referenced": "프로필 {value}을(를) 삭제하기 전에 프로젝트 연결을 해제하세요.",
1556
+ "profiles.error.size": "프로필 파일 또는 모음의 크기가 지원 한도를 초과했습니다.",
1557
+ "profiles.error.file": "프로필 파일을 읽을 수 없습니다: {value}",
1558
+ "profiles.error.width": "미리 보기 너비는 2~10000 사이의 정수여야 합니다.",
1559
+ "profiles.reason.user_default": "사용자 기본값",
1560
+ "profiles.reason.profile": "일치하는 프로필",
1561
+ "profiles.reason.unbound": "연결 없음 · 사용자 기본값 사용",
1562
+ "profiles.reason.path_unavailable": "디렉터리 확인 불가 · 사용자 기본값 사용",
1563
+ "profiles.reason.missing_profile": "연결된 프로필 없음 · 사용자 기본값 사용",
1564
+ "profiles.reason.ambiguous_binding": "경로 연결 충돌 · 사용자 기본값 사용",
1565
+ "profiles.reason.invalid_collection": "프로필 모음 오류 · 사용자 기본값 사용",
1566
+ "task.title": "작업 상세",
1567
+ "task.unknown": "알 수 없음",
1568
+ "task.close": "닫기",
1569
+ "task.readonly": "읽기 전용 · 필요할 때 새로 고침",
1570
+ "task.session": "세션: {value}",
1571
+ "task.prompt": "작업 ID: {value}",
1572
+ "task.captured": "읽은 시각: {value}",
1573
+ "task.status": "관측된 상태: {value}; 단계: {phase}",
1574
+ "task.elapsed": "작업 총 시간: {value}",
1575
+ "task.active": "증거로 확인된 활성 시간: {value}",
1576
+ "task.progress": "체크리스트 완료 / 전체: {value}",
1577
+ "task.agents": "소속을 확인할 수 있는 에이전트",
1578
+ "task.sources": "증거 및 확인 범위",
1579
+ "task.evidence": "{source} · {scope} · {status} · {time} · {freshness}",
1580
+ "task.fallback": "Claude 터미널에서 열거나 claude-statusline task show --session-id ID를 실행하세요.",
1581
+ "task.help": "지정한 세션의 기존 관측 정보를 읽습니다. 수집이나 상태 복구는 수행하지 않습니다.",
1582
+ "task.error.input": "유효한 세션 ID와 선택적으로 프롬프트 ID 또는 에이전트 스냅샷을 제공하세요.",
1583
+ "task.limit.independent_snapshots": "각 출처는 독립된 스냅샷이며, 한 시점의 완전한 기록이 아닙니다.",
1584
+ "task.limit.ambiguous_current_task": "현재 작업 참조가 서로 다릅니다. 작업을 추측하지 않았습니다.",
1585
+ "task.limit.no_current_task": "명확한 현재 작업이 관측되지 않았습니다.",
1586
+ "task.limit.ambiguous_owner": "작업 또는 에이전트의 소속이 불명확합니다.",
1587
+ "task.limit.missing_start": "작업 시작이 관측되지 않았습니다.",
1588
+ "task.limit.elapsed_unavailable": "현재 증거로 총 시간을 확인할 수 없습니다.",
1589
+ "task.limit.parent_not_observed": "일부 상위 에이전트 관계가 관측되지 않았습니다.",
1590
+ "task.limit.ambiguous_parent": "일치하지 않는 상위 정보로 계층을 구성하지 않았습니다.",
1591
+ "settings.profiles": "표시 프로필 및 프로젝트",
1592
+ "ui.actions.profiles": "표시 프로필 및 프로젝트",
1593
+ "cli.help.display_profiles": "표시 프로필 및 프로젝트",
1594
+ "cli.help.project_bindings": "표시 프로필 및 프로젝트",
1595
+ "cli.help.task_details": "작업 상세",
1596
+ "task.value.observed": "관측됨",
1597
+ "task.value.not_observed": "관측되지 않음",
1598
+ "task.value.partial": "부분 관측",
1599
+ "task.value.stale": "오래된 관측",
1600
+ "task.value.invalid_field": "잘못된 필드",
1601
+ "task.value.session_mismatch": "세션 또는 대화 기록 불일치",
1602
+ "task.value.source_unavailable": "소스 사용 불가",
1603
+ "task.value.newer_than_input": "입력보다 나중 관측",
1604
+ "task.value.association_unavailable": "연결 확인 불가",
1605
+ "task.value.prompt_mismatch": "프롬프트 불일치",
1606
+ "task.value.current": "소스 최신성 기준 내",
1607
+ "task.value.unknown": "알 수 없음",
1608
+ "task.limit.native_timing_disabled": "네이티브 시간 측정 꺼짐",
1609
+ "task.value.native_timing_disabled": "네이티브 시간 측정 꺼짐",
1610
+ "task.limit.runtime_disabled": "실시간 지표 꺼짐",
1611
+ "task.value.runtime_disabled": "실시간 지표 꺼짐",
1612
+ "task.limit.incomplete": "확인 범위 불완전",
1613
+ "task.value.incomplete": "확인 범위 불완전",
1614
+ "task.limit.abnormal_clock": "시계 증거를 신뢰할 수 없음",
1615
+ "task.value.abnormal_clock": "시계 증거를 신뢰할 수 없음",
1616
+ "task.limit.not_observed": "관측되지 않음",
1617
+ "task.limit.stale": "오래된 관측",
1618
+ "task.limit.wait_coverage_missing": "대기 증거 불완전",
1619
+ "task.value.wait_coverage_missing": "대기 증거 불완전",
1620
+ "task.limit.task_not_observed": "관측되지 않음",
1621
+ "task.value.running": "실행 중",
1622
+ "task.value.waiting": "대기 중",
1623
+ "task.value.completed": "완료",
1624
+ "task.value.failed": "실패",
1625
+ "task.value.interrupted": "중단됨",
1626
+ "task.value.pending": "대기",
1627
+ "task.value.idle": "유휴",
1628
+ "task.value.killed": "중지됨",
1629
+ "task.value.main": "주 실행",
1630
+ "task.value.waiting_subagents": "에이전트 대기",
1631
+ "task.value.resuming_main": "주 작업 마무리",
1632
+ "task.value.stop_pending": "중지 확인 대기",
1633
+ "task.value.queued": "대기열",
1634
+ "task.value.waiting agents": "에이전트 대기",
1635
+ "task.value.main wrap-up": "주 작업 마무리",
1636
+ "errors.powerline.value": "잘못된 Powerline 옵션: {field}",
1637
+ "fields.global.powerline.padding.label": "블록 여백 (각 면 한 칸)",
1638
+ "fields.global.powerline.separator.label": "블록 구분자 모양",
1639
+ "fields.global.powerline.start_cap.label": "시작 장식",
1640
+ "fields.global.powerline.end_cap.label": "끝 장식",
1641
+ "fields.global.powerline.color_mode.label": "여러 줄의 블록 색상",
1642
+ "quick.copy": "이름을 지정해 복사본 저장",
1643
+ "quick.purpose.daily-development": "일상 개발 — 간결한 완성 구성",
1644
+ "quick.purpose.agent-focus": "다중 에이전트 — 실패 상태 표시",
1645
+ "quick.purpose.quota-watch": "사용 한도 모니터링 — 사용량과 초기화",
1646
+ "quick.requirements.daily-development": "Claude 입력, 로컬 Git, 작업 시간을 사용합니다. 비용은 둘째 줄에서 켤 수 있습니다. 구성 선택으로 수집이 활성화되지 않습니다.",
1647
+ "quick.requirements.agent-focus": "에이전트 행에는 지원되는 Claude 입력이 필요합니다. 실행 상태·진행률·수는 실시간 지표를 별도로 켜야 합니다. 작업 시간과 에이전트 경과 시간은 범위가 다릅니다. 완료는 숨기고 실패는 표시합니다.",
1648
+ "quick.requirements.quota-watch": "관측된 사용 한도와 초기화 정보가 필요합니다. 없거나 만료된 값은 0으로 표시하지 않고 생략합니다. 비용과 캐시는 데이터가 있을 때만 표시하며 수집을 활성화하지 않습니다.",
1649
+ "values.left": "왼쪽",
1650
+ "values.right": "오른쪽",
1651
+ "values.both": "양쪽",
1652
+ "values.arrow": "화살표",
1653
+ "values.slash": "사선",
1654
+ "values.bar": "세로선",
1655
+ "values.semantic": "구성 요소 의미별",
1656
+ "values.continuous": "줄 사이에 연속",
1657
+ "values.restart": "줄마다 다시 시작",
1658
+ "cli.help.guided_setup": "상태 표시줄 확인·미리 보기·연결",
1659
+ "setup.title": "상태 표시줄 설정",
1660
+ "setup.checks": "1. 환경 및 설정 확인",
1661
+ "setup.choice": "2. 표시 구성 선택",
1662
+ "setup.quick": "3. 구성 및 외관",
1663
+ "setup.review": "4. 적용 전 검토",
1664
+ "setup.continue": "계속",
1665
+ "setup.blocked": "저장 전에 오류를 해결하세요. Esc로 종료",
1666
+ "setup.integration_blocked": "연결 불가 — 확인 항목을 먼저 해결하세요",
1667
+ "setup.keep": "현재 표시 / 기본값 유지",
1668
+ "setup.choose": "구성을 선택하고 미리 보기",
1669
+ "setup.integrate": "표시 저장 및 Claude 연결",
1670
+ "setup.save": "표시만 저장",
1671
+ "setup.cancel": "취소",
1672
+ "setup.sample": "고정 예시 — 실제 세션 표시는 아직 검증되지 않음",
1673
+ "setup.resource": "변경 예정 리소스",
1674
+ "setup.keys": "위/아래 선택 · Enter 계속 · Backspace 뒤로 · PgUp/PgDn 상세 · Tab 미리 보기 · L 언어(저장) · Esc 취소",
1675
+ "setup.small": "64열 × 18행 이상으로 늘려 주세요. Esc로 취소합니다.",
1676
+ "setup.review_note": "표시 저장과 연결은 별도로 확정됩니다. 호스트 및 수집 설정은 유지됩니다. 스크롤하여 변경 사항을 확인하세요.",
1677
+ "setup.language_failed": "언어를 저장하지 못했습니다. 이전 언어를 유지합니다.",
1678
+ "setup.node": "Node {version}, 지원 범위: {supported}",
1679
+ "setup.host": "Claude {version}. 연결하려면 확인된 버전 2.1.205 이상이 필요합니다. 지원되지 않는 기능은 중지 상태를 유지합니다.",
1680
+ "setup.directory": "설정 위치 접근 가능: {path} (읽기 전용 권한 확인)",
1681
+ "setup.target": "대상: {path}의 사용자 기본값. 저장된 구성 {profiles}개와 프로젝트 연결 {bindings}개를 유지합니다.",
1682
+ "setup.bound_project": "이 프로젝트는 {path}의 {name}을 사용합니다. 기본값을 변경해도 이 연결은 바뀌지 않습니다.",
1683
+ "setup.display_valid": "표시·설정·구성 파일이 유효합니다",
1684
+ "setup.preferences": "유지할 설정: 네이티브 편집기 {native}, 외부 편집기 {external}, 네이티브 타이밍 {timing}, 실시간 지표 {live}.",
1685
+ "setup.plugins": "네이티브 편집기 연결: {native}. 공식 플러그인 작업은 적용 후에만 실행되며 재시작 검증은 아직 필요합니다.",
1686
+ "setup.ownership": "설치 사전 확인 통과. 리소스 변경 없음",
1687
+ "setup.conflict": "검토 후 설정이 변경되었습니다. setup을 다시 실행하고 확인하세요.",
1688
+ "setup.integration_failed": "연결이 완료되지 않았습니다. 보고된 플러그인 상태를 확인하세요.",
1689
+ "setup.verification_failed": "기록된 리소스가 모든 설치 검사를 통과하지 못했습니다.",
1690
+ "setup.tty": "대화형 설정에는 터미널이 필요합니다. 읽기 전용 setup --dry-run 또는 다음 명령을 사용하세요:",
1691
+ "setup.dry_run": "읽기 전용 설정 확인. 구성 선택 및 파일 생성 없음.",
1692
+ "setup.steps": "단계: 확인 → 유지/선택 → 미리 보기 → 검토 → 명시적 저장/연결 → 리소스 검증 → Claude 재시작 후 실제 표시 확인.",
1693
+ "setup.cancelled": "적용 전에 취소했습니다. 표시와 연결은 변경되지 않았으며 명시적으로 저장한 UI 언어는 유지됩니다.",
1694
+ "setup.committed_display": "표시 저장 완료.",
1695
+ "setup.committed_integration": "연결 작업이 반환되었습니다. 리소스를 확인합니다.",
1696
+ "setup.stage_review": "표시 저장 전",
1697
+ "setup.stage_display": "표시 저장 완료, 연결은 미완료일 수 있음",
1698
+ "setup.stage_integration": "연결 작업 반환됨",
1699
+ "setup.stage_verified": "리소스 검증 완료",
1700
+ "setup.partial": "중지 단계: {stage}. 전체 과정이 되돌려진 것은 아닙니다. doctor를 확인하고 미완료 트랜잭션은 recover로 처리한 후 setup을 다시 실행하세요.",
1701
+ "setup.success": "리소스 검증 완료. Claude를 재시작하여 실제 표시를 확인하세요. 추가 편집은 /statusline-config 또는 configure를 사용합니다.",
1702
+ "setup.saved_only": "표시를 저장했습니다. 연결은 적용하지 않았습니다. Claude를 연결할 준비가 되면 setup을 다시 실행하세요.",
1703
+ "setup.value.requested": "활성화 요청",
1704
+ "setup.value.disabled": "비활성화",
1705
+ "setup.value.suspended": "중지됨",
1706
+ "setup.value.unknown": "알 수 없음"
1509
1707
  }