@eventmodelers/cli 1.0.45 → 1.0.47

package/stacks/umadb/templates/build-kit/lib/prompt.md

@@ -0,0 +1,128 @@
+# Agent Task Instructions
+
+You are an autonomous agent reacting to slice status change events on an Eventmodelers board.
+
+## Your Loop
+
+1. Read `AGENT.md` to load accumulated learnings before doing anything else.
+2. Read `.build-kit/tasks.json`.
+3. If `tasks.json` is empty or missing, reply with:
+   <promise>IDLE</promise>
+   and stop.
+4. Pick the **oldest task** (earliest `createdAt`).
+5. Execute the task — see the Execution section below.
+6. After execution, remove that task from the array and write `.build-kit/tasks.json` back.
+7. Append a progress entry to `progress.txt` (create if missing).
+8. Update `AGENT.md` with any new reusable learnings discovered this iteration.
+9. Reply normally so the next iteration can pick up the next task.
+
+## Execution
+
+Each task has a single `payload` of type `SliceChangedPayload`:
+
+```
+{
+  event:          "slice:changed"
+  organizationId: string | null
+  boardId:        string
+  sliceId:        string   ← SLICE_BORDER node UUID
+  sliceTitle:     string | null
+  sliceStatus:    string | null   ← e.g. "InProgress", "Done", "Blocked"
+  timestamp:      number
+}
+```
+
+### Step 1 — Load credentials
+
+Run `/connect` to resolve `TOKEN`, `BOARD_ID`, `ORG_ID`, and `BASE_URL` from `.eventmodelers/config.json`.
+
+### Step 2 — Load the slice
+
+Run `/load-slice sliceId=<payload.sliceId>` to fetch full slice details (title, status, raw node record).
+
+### Step 3 — Act on the change
+
+Inspect the `sliceStatus` in the payload:
+
+#### `Planned` — build the slice
+
+This is the build trigger. Setting `InProgress` and building are one atomic step:
+
+**If the slice's requirements are genuinely ambiguous, contradictory, or missing a decision you need in order to proceed — do not guess, and do not build anyway.** Invoke `/request-feedback` with the specific question; it posts the question as a comment on the slice and marks it `Blocked` (superseding the `InProgress` set in step 1), then drop this task without finishing the build. This is an escalation path, not a routine step — most slices are fully specified.
+
+1. Immediately call `/update-slice-status` to set the slice to `InProgress` on the board.
+
+   **Claim conflict**: if this call reports the slice is already in `InProgress` (or any status other than `Planned`), another agent already claimed it first — this is expected, not an error. Log it in `progress.txt`, drop this task without building, and continue the loop (the next task will naturally cover the next slice). Do not retry.
+
+2. Read the slice definition from `.build-kit/.slices/<contextSlug>/<sliceFolder>/slice.json` (written by `/load-slice`).
+
+3. Determine the **slice type** from the slice.json:
+   - **Translation** — `sliceType === "TRANSLATION"` → read `description` and `notes` from slice.json for hints; default to `/build-automation` if nothing else is specified
+   - **Automation** — `processors` array is non-empty → invoke `/build-automation`
+   - **State-view** — `projections` or `queries` array is non-empty → invoke `/build-state-view`
+   - **State-change** — default (has `commands` / `events`) → invoke `/build-state-change`
+
+4. Invoke the matching skill and follow its instructions **completely**. Do NOT implement the slice manually.
+
+5. **Verify against slice.json**: Cross-check the implementation — every command field, event field, and specification in slice.json must appear in the code. No invented fields — if it is not in slice.json, it must not be in the code.
+
+6. Run quality checks:
+   - Compile: `./mvnw compile -q`
+   - Test (slice only): `./mvnw test -Dtest="<SliceName>*" -q`
+
+7. If checks pass, commit all changes with message: `feat: [Slice Name]`.
+
+8. Call `/update-slice-status` to set the slice to `Done` on the board.
+
+#### `InProgress`
+Another agent is already building this slice. Log it and skip — do not build.
+
+#### `Done`
+Summarize what was completed and update `progress.txt`.
+
+#### `Blocked`
+Log the blocker in `progress.txt`.
+
+#### `Review`
+Fetch slice details and prepare a review summary in `progress.txt`.
+
+#### Any other status (`Created`, etc.)
+Load the slice and log the state transition in `progress.txt`. No build action.
+
+Use the skills available in `.claude/skills/` to interact with the board.
+
+## Updating tasks.json
+
+After completing a task, remove it from the array and write the updated array back to `.build-kit/tasks.json`. If the array is now empty, write `[]`.
+
+## Progress Report Format
+
+APPEND to `progress.txt` (never replace):
+```
+## [ISO timestamp] — Task [task.id]
+
+Slice: [sliceTitle] ([sliceId])
+Status change: [sliceStatus]
+
+Action taken:
+- [what was done in response to the slice change]
+
+Learnings:
+- [any patterns, gotchas, or reusable knowledge discovered]
+---
+```
+
+## Stop Condition
+
+If `.build-kit/tasks.json` is empty (`[]`) or does not exist, reply with:
+<promise>IDLE</promise>
+
+## Updating AGENT.md
+
+After completing a task, add any **reusable** learnings to `AGENT.md` — patterns, gotchas, API quirks, or skill behaviour that future iterations should know. Only add things that are general and applicable beyond this single task. Do not duplicate what is already there.
+
+## Important
+
+- Process **one task per iteration**.
+- Read `AGENT.md` first — it contains patterns from previous iterations.
+- Always start with `/connect` if credentials are not yet loaded.

package/stacks/umadb/templates/root/.mvn/wrapper/maven-wrapper.properties

@@ -0,0 +1,19 @@
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+wrapperVersion=3.3.2
+distributionType=only-script
+distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.9/apache-maven-3.9.9-bin.zip

package/stacks/umadb/templates/root/README.md

@@ -0,0 +1,48 @@
+# UmaDB Quickstart
+
+A minimal Spring Boot project wired up to [UmaDB](https://umadb.io/) - a gRPC event store - via
+its Java client, ready for the `build-state-change`/`build-state-view`/`build-automation` skills
+to generate slices into.
+
+## Prerequisites
+
+- Java 21 or higher
+- Maven 3.6 or higher
+- Docker (for running UmaDB and PostgreSQL locally)
+
+## Getting Started
+
+```bash
+docker-compose up -d
+mvn spring-boot:run
+```
+
+Or run `QuickstartApplication` from your IDE. `spring-boot-docker-compose` also starts
+`docker-compose.yml`'s services automatically on `mvn spring-boot:run` if they aren't running yet.
+
+## What's here
+
+- `UmaDbConfig` - wires the shared `UmaDbClient` bean every command handler's `DecisionModelLoader`
+  uses (UmaDB has no Spring Boot starter of its own, unlike Axon Framework - this project connects
+  and shuts it down by hand).
+- `eventstore/` - the shared plumbing every slice builds on, since the raw UmaDB client has no
+  framework layer of its own:
+  - `EventCodec` - JSON (Jackson) serialization of domain event/command records to/from UmaDB's
+    opaque `byte[]` payload.
+  - `DecisionModelLoader` - the read-decide-append loop every write slice's command handler uses;
+    see `build-state-change`.
+  - `SliceEventListener` / `EventDispatcher` - the live-subscription fan-out every read-model
+    projector and automation processor reacts through; see `build-state-view` / `build-automation`.
+  - `OptimisticConcurrencyException` - thrown when a command handler's append is rejected by a
+    conflicting concurrent write.
+- `src/test/java/.../testsupport/InMemoryUmaDbClient` - a fast, in-process fake of `UmaDbClient`
+  for command-handler unit tests, since UmaDB ships no test-fixture library of its own (only a
+  Testcontainers-based real-server setup, which is what `build-state-view`'s reference
+  integration test uses instead).
+
+No slices are included - each is generated by the matching build skill from a board's `slice.json`.
+
+## Useful resources
+
+- [UmaDB documentation](https://umadb.io/) - quick start, Docker image, gRPC API reference
+- [UmaDB Java client](https://umadb.io/clients/java.html) ([source](https://github.com/DomenicDev/umadb-java-client))

package/stacks/umadb/templates/root/docker-compose.yml

@@ -0,0 +1,29 @@
+services:
+  postgres:
+    image: postgres:17
+    ports:
+      - "5432:5432"
+    environment:
+      - POSTGRES_DB=quickstart
+      - POSTGRES_USER=quickstart
+      - POSTGRES_PASSWORD=quickstart
+    volumes:
+      - postgres-data:/var/lib/postgresql/data
+    healthcheck:
+      test: ["CMD-SHELL", "pg_isready -U quickstart"]
+      interval: 10s
+      timeout: 5s
+      retries: 10
+
+  umadb:
+    image: umadb/umadb:latest
+    ports:
+      - "50051:50051"
+    volumes:
+      - umadb-data:/data
+
+volumes:
+  postgres-data:
+    driver: local
+  umadb-data:
+    driver: local

package/stacks/umadb/templates/root/mvnw

@@ -0,0 +1,259 @@
+#!/bin/sh
+# ----------------------------------------------------------------------------
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+# ----------------------------------------------------------------------------
+
+# ----------------------------------------------------------------------------
+# Apache Maven Wrapper startup batch script, version 3.3.2
+#
+# Optional ENV vars
+# -----------------
+#   JAVA_HOME - location of a JDK home dir, required when download maven via java source
+#   MVNW_REPOURL - repo url base for downloading maven distribution
+#   MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven
+#   MVNW_VERBOSE - true: enable verbose log; debug: trace the mvnw script; others: silence the output
+# ----------------------------------------------------------------------------
+
+set -euf
+[ "${MVNW_VERBOSE-}" != debug ] || set -x
+
+# OS specific support.
+native_path() { printf %s\\n "$1"; }
+case "$(uname)" in
+CYGWIN* | MINGW*)
+  [ -z "${JAVA_HOME-}" ] || JAVA_HOME="$(cygpath --unix "$JAVA_HOME")"
+  native_path() { cygpath --path --windows "$1"; }
+  ;;
+esac
+
+# set JAVACMD and JAVACCMD
+set_java_home() {
+  # For Cygwin and MinGW, ensure paths are in Unix format before anything is touched
+  if [ -n "${JAVA_HOME-}" ]; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ]; then
+      # IBM's JDK on AIX uses strange locations for the executables
+      JAVACMD="$JAVA_HOME/jre/sh/java"
+      JAVACCMD="$JAVA_HOME/jre/sh/javac"
+    else
+      JAVACMD="$JAVA_HOME/bin/java"
+      JAVACCMD="$JAVA_HOME/bin/javac"
+
+      if [ ! -x "$JAVACMD" ] || [ ! -x "$JAVACCMD" ]; then
+        echo "The JAVA_HOME environment variable is not defined correctly, so mvnw cannot run." >&2
+        echo "JAVA_HOME is set to \"$JAVA_HOME\", but \"\$JAVA_HOME/bin/java\" or \"\$JAVA_HOME/bin/javac\" does not exist." >&2
+        return 1
+      fi
+    fi
+  else
+    JAVACMD="$(
+      'set' +e
+      'unset' -f command 2>/dev/null
+      'command' -v java
+    )" || :
+    JAVACCMD="$(
+      'set' +e
+      'unset' -f command 2>/dev/null
+      'command' -v javac
+    )" || :
+
+    if [ ! -x "${JAVACMD-}" ] || [ ! -x "${JAVACCMD-}" ]; then
+      echo "The java/javac command does not exist in PATH nor is JAVA_HOME set, so mvnw cannot run." >&2
+      return 1
+    fi
+  fi
+}
+
+# hash string like Java String::hashCode
+hash_string() {
+  str="${1:-}" h=0
+  while [ -n "$str" ]; do
+    char="${str%"${str#?}"}"
+    h=$(((h * 31 + $(LC_CTYPE=C printf %d "'$char")) % 4294967296))
+    str="${str#?}"
+  done
+  printf %x\\n $h
+}
+
+verbose() { :; }
+[ "${MVNW_VERBOSE-}" != true ] || verbose() { printf %s\\n "${1-}"; }
+
+die() {
+  printf %s\\n "$1" >&2
+  exit 1
+}
+
+trim() {
+  # MWRAPPER-139:
+  #   Trims trailing and leading whitespace, carriage returns, tabs, and linefeeds.
+  #   Needed for removing poorly interpreted newline sequences when running in more
+  #   exotic environments such as mingw bash on Windows.
+  printf "%s" "${1}" | tr -d '[:space:]'
+}
+
+# parse distributionUrl and optional distributionSha256Sum, requires .mvn/wrapper/maven-wrapper.properties
+while IFS="=" read -r key value; do
+  case "${key-}" in
+  distributionUrl) distributionUrl=$(trim "${value-}") ;;
+  distributionSha256Sum) distributionSha256Sum=$(trim "${value-}") ;;
+  esac
+done <"${0%/*}/.mvn/wrapper/maven-wrapper.properties"
+[ -n "${distributionUrl-}" ] || die "cannot read distributionUrl property in ${0%/*}/.mvn/wrapper/maven-wrapper.properties"
+
+case "${distributionUrl##*/}" in
+maven-mvnd-*bin.*)
+  MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/
+  case "${PROCESSOR_ARCHITECTURE-}${PROCESSOR_ARCHITEW6432-}:$(uname -a)" in
+  *AMD64:CYGWIN* | *AMD64:MINGW*) distributionPlatform=windows-amd64 ;;
+  :Darwin*x86_64) distributionPlatform=darwin-amd64 ;;
+  :Darwin*arm64) distributionPlatform=darwin-aarch64 ;;
+  :Linux*x86_64*) distributionPlatform=linux-amd64 ;;
+  *)
+    echo "Cannot detect native platform for mvnd on $(uname)-$(uname -m), use pure java version" >&2
+    distributionPlatform=linux-amd64
+    ;;
+  esac
+  distributionUrl="${distributionUrl%-bin.*}-$distributionPlatform.zip"
+  ;;
+maven-mvnd-*) MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ ;;
+*) MVN_CMD="mvn${0##*/mvnw}" _MVNW_REPO_PATTERN=/org/apache/maven/ ;;
+esac
+
+# apply MVNW_REPOURL and calculate MAVEN_HOME
+# maven home pattern: ~/.m2/wrapper/dists/{apache-maven-<version>,maven-mvnd-<version>-<platform>}/<hash>
+[ -z "${MVNW_REPOURL-}" ] || distributionUrl="$MVNW_REPOURL$_MVNW_REPO_PATTERN${distributionUrl#*"$_MVNW_REPO_PATTERN"}"
+distributionUrlName="${distributionUrl##*/}"
+distributionUrlNameMain="${distributionUrlName%.*}"
+distributionUrlNameMain="${distributionUrlNameMain%-bin}"
+MAVEN_USER_HOME="${MAVEN_USER_HOME:-${HOME}/.m2}"
+MAVEN_HOME="${MAVEN_USER_HOME}/wrapper/dists/${distributionUrlNameMain-}/$(hash_string "$distributionUrl")"
+
+exec_maven() {
+  unset MVNW_VERBOSE MVNW_USERNAME MVNW_PASSWORD MVNW_REPOURL || :
+  exec "$MAVEN_HOME/bin/$MVN_CMD" "$@" || die "cannot exec $MAVEN_HOME/bin/$MVN_CMD"
+}
+
+if [ -d "$MAVEN_HOME" ]; then
+  verbose "found existing MAVEN_HOME at $MAVEN_HOME"
+  exec_maven "$@"
+fi
+
+case "${distributionUrl-}" in
+*?-bin.zip | *?maven-mvnd-?*-?*.zip) ;;
+*) die "distributionUrl is not valid, must match *-bin.zip or maven-mvnd-*.zip, but found '${distributionUrl-}'" ;;
+esac
+
+# prepare tmp dir
+if TMP_DOWNLOAD_DIR="$(mktemp -d)" && [ -d "$TMP_DOWNLOAD_DIR" ]; then
+  clean() { rm -rf -- "$TMP_DOWNLOAD_DIR"; }
+  trap clean HUP INT TERM EXIT
+else
+  die "cannot create temp dir"
+fi
+
+mkdir -p -- "${MAVEN_HOME%/*}"
+
+# Download and Install Apache Maven
+verbose "Couldn't find MAVEN_HOME, downloading and installing it ..."
+verbose "Downloading from: $distributionUrl"
+verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName"
+
+# select .zip or .tar.gz
+if ! command -v unzip >/dev/null; then
+  distributionUrl="${distributionUrl%.zip}.tar.gz"
+  distributionUrlName="${distributionUrl##*/}"
+fi
+
+# verbose opt
+__MVNW_QUIET_WGET=--quiet __MVNW_QUIET_CURL=--silent __MVNW_QUIET_UNZIP=-q __MVNW_QUIET_TAR=''
+[ "${MVNW_VERBOSE-}" != true ] || __MVNW_QUIET_WGET='' __MVNW_QUIET_CURL='' __MVNW_QUIET_UNZIP='' __MVNW_QUIET_TAR=v
+
+# normalize http auth
+case "${MVNW_PASSWORD:+has-password}" in
+'') MVNW_USERNAME='' MVNW_PASSWORD='' ;;
+has-password) [ -n "${MVNW_USERNAME-}" ] || MVNW_USERNAME='' MVNW_PASSWORD='' ;;
+esac
+
+if [ -z "${MVNW_USERNAME-}" ] && command -v wget >/dev/null; then
+  verbose "Found wget ... using wget"
+  wget ${__MVNW_QUIET_WGET:+"$__MVNW_QUIET_WGET"} "$distributionUrl" -O "$TMP_DOWNLOAD_DIR/$distributionUrlName" || die "wget: Failed to fetch $distributionUrl"
+elif [ -z "${MVNW_USERNAME-}" ] && command -v curl >/dev/null; then
+  verbose "Found curl ... using curl"
+  curl ${__MVNW_QUIET_CURL:+"$__MVNW_QUIET_CURL"} -f -L -o "$TMP_DOWNLOAD_DIR/$distributionUrlName" "$distributionUrl" || die "curl: Failed to fetch $distributionUrl"
+elif set_java_home; then
+  verbose "Falling back to use Java to download"
+  javaSource="$TMP_DOWNLOAD_DIR/Downloader.java"
+  targetZip="$TMP_DOWNLOAD_DIR/$distributionUrlName"
+  cat >"$javaSource" <<-END
+	public class Downloader extends java.net.Authenticator
+	{
+	  protected java.net.PasswordAuthentication getPasswordAuthentication()
+	  {
+	    return new java.net.PasswordAuthentication( System.getenv( "MVNW_USERNAME" ), System.getenv( "MVNW_PASSWORD" ).toCharArray() );
+	  }
+	  public static void main( String[] args ) throws Exception
+	  {
+	    setDefault( new Downloader() );
+	    java.nio.file.Files.copy( java.net.URI.create( args[0] ).toURL().openStream(), java.nio.file.Paths.get( args[1] ).toAbsolutePath().normalize() );
+	  }
+	}
+	END
+  # For Cygwin/MinGW, switch paths to Windows format before running javac and java
+  verbose " - Compiling Downloader.java ..."
+  "$(native_path "$JAVACCMD")" "$(native_path "$javaSource")" || die "Failed to compile Downloader.java"
+  verbose " - Running Downloader.java ..."
+  "$(native_path "$JAVACMD")" -cp "$(native_path "$TMP_DOWNLOAD_DIR")" Downloader "$distributionUrl" "$(native_path "$targetZip")"
+fi
+
+# If specified, validate the SHA-256 sum of the Maven distribution zip file
+if [ -n "${distributionSha256Sum-}" ]; then
+  distributionSha256Result=false
+  if [ "$MVN_CMD" = mvnd.sh ]; then
+    echo "Checksum validation is not supported for maven-mvnd." >&2
+    echo "Please disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2
+    exit 1
+  elif command -v sha256sum >/dev/null; then
+    if echo "$distributionSha256Sum  $TMP_DOWNLOAD_DIR/$distributionUrlName" | sha256sum -c >/dev/null 2>&1; then
+      distributionSha256Result=true
+    fi
+  elif command -v shasum >/dev/null; then
+    if echo "$distributionSha256Sum  $TMP_DOWNLOAD_DIR/$distributionUrlName" | shasum -a 256 -c >/dev/null 2>&1; then
+      distributionSha256Result=true
+    fi
+  else
+    echo "Checksum validation was requested but neither 'sha256sum' or 'shasum' are available." >&2
+    echo "Please install either command, or disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties." >&2
+    exit 1
+  fi
+  if [ $distributionSha256Result = false ]; then
+    echo "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised." >&2
+    echo "If you updated your Maven version, you need to update the specified distributionSha256Sum property." >&2
+    exit 1
+  fi
+fi
+
+# unzip and move
+if command -v unzip >/dev/null; then
+  unzip ${__MVNW_QUIET_UNZIP:+"$__MVNW_QUIET_UNZIP"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -d "$TMP_DOWNLOAD_DIR" || die "failed to unzip"
+else
+  tar xzf${__MVNW_QUIET_TAR:+"$__MVNW_QUIET_TAR"} "$TMP_DOWNLOAD_DIR/$distributionUrlName" -C "$TMP_DOWNLOAD_DIR" || die "failed to untar"
+fi
+printf %s\\n "$distributionUrl" >"$TMP_DOWNLOAD_DIR/$distributionUrlNameMain/mvnw.url"
+mv -- "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" "$MAVEN_HOME" || [ -d "$MAVEN_HOME" ] || die "fail to move MAVEN_HOME"
+
+clean || :
+exec_maven "$@"

package/stacks/umadb/templates/root/mvnw.cmd

@@ -0,0 +1,149 @@
+<# : batch portion
+@REM ----------------------------------------------------------------------------
+@REM Licensed to the Apache Software Foundation (ASF) under one
+@REM or more contributor license agreements.  See the NOTICE file
+@REM distributed with this work for additional information
+@REM regarding copyright ownership.  The ASF licenses this file
+@REM to you under the Apache License, Version 2.0 (the
+@REM "License"); you may not use this file except in compliance
+@REM with the License.  You may obtain a copy of the License at
+@REM
+@REM    http://www.apache.org/licenses/LICENSE-2.0
+@REM
+@REM Unless required by applicable law or agreed to in writing,
+@REM software distributed under the License is distributed on an
+@REM "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+@REM KIND, either express or implied.  See the License for the
+@REM specific language governing permissions and limitations
+@REM under the License.
+@REM ----------------------------------------------------------------------------
+
+@REM ----------------------------------------------------------------------------
+@REM Apache Maven Wrapper startup batch script, version 3.3.2
+@REM
+@REM Optional ENV vars
+@REM   MVNW_REPOURL - repo url base for downloading maven distribution
+@REM   MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven
+@REM   MVNW_VERBOSE - true: enable verbose log; others: silence the output
+@REM ----------------------------------------------------------------------------
+
+@IF "%__MVNW_ARG0_NAME__%"=="" (SET __MVNW_ARG0_NAME__=%~nx0)
+@SET __MVNW_CMD__=
+@SET __MVNW_ERROR__=
+@SET __MVNW_PSMODULEP_SAVE=%PSModulePath%
+@SET PSModulePath=
+@FOR /F "usebackq tokens=1* delims==" %%A IN (`powershell -noprofile "& {$scriptDir='%~dp0'; $script='%__MVNW_ARG0_NAME__%'; icm -ScriptBlock ([Scriptblock]::Create((Get-Content -Raw '%~f0'))) -NoNewScope}"`) DO @(
+  IF "%%A"=="MVN_CMD" (set __MVNW_CMD__=%%B) ELSE IF "%%B"=="" (echo %%A) ELSE (echo %%A=%%B)
+)
+@SET PSModulePath=%__MVNW_PSMODULEP_SAVE%
+@SET __MVNW_PSMODULEP_SAVE=
+@SET __MVNW_ARG0_NAME__=
+@SET MVNW_USERNAME=
+@SET MVNW_PASSWORD=
+@IF NOT "%__MVNW_CMD__%"=="" (%__MVNW_CMD__% %*)
+@echo Cannot start maven from wrapper >&2 && exit /b 1
+@GOTO :EOF
+: end batch / begin powershell #>
+
+$ErrorActionPreference = "Stop"
+if ($env:MVNW_VERBOSE -eq "true") {
+  $VerbosePreference = "Continue"
+}
+
+# calculate distributionUrl, requires .mvn/wrapper/maven-wrapper.properties
+$distributionUrl = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionUrl
+if (!$distributionUrl) {
+  Write-Error "cannot read distributionUrl property in $scriptDir/.mvn/wrapper/maven-wrapper.properties"
+}
+
+switch -wildcard -casesensitive ( $($distributionUrl -replace '^.*/','') ) {
+  "maven-mvnd-*" {
+    $USE_MVND = $true
+    $distributionUrl = $distributionUrl -replace '-bin\.[^.]*$',"-windows-amd64.zip"
+    $MVN_CMD = "mvnd.cmd"
+    break
+  }
+  default {
+    $USE_MVND = $false
+    $MVN_CMD = $script -replace '^mvnw','mvn'
+    break
+  }
+}
+
+# apply MVNW_REPOURL and calculate MAVEN_HOME
+# maven home pattern: ~/.m2/wrapper/dists/{apache-maven-<version>,maven-mvnd-<version>-<platform>}/<hash>
+if ($env:MVNW_REPOURL) {
+  $MVNW_REPO_PATTERN = if ($USE_MVND) { "/org/apache/maven/" } else { "/maven/mvnd/" }
+  $distributionUrl = "$env:MVNW_REPOURL$MVNW_REPO_PATTERN$($distributionUrl -replace '^.*'+$MVNW_REPO_PATTERN,'')"
+}
+$distributionUrlName = $distributionUrl -replace '^.*/',''
+$distributionUrlNameMain = $distributionUrlName -replace '\.[^.]*$','' -replace '-bin$',''
+$MAVEN_HOME_PARENT = "$HOME/.m2/wrapper/dists/$distributionUrlNameMain"
+if ($env:MAVEN_USER_HOME) {
+  $MAVEN_HOME_PARENT = "$env:MAVEN_USER_HOME/wrapper/dists/$distributionUrlNameMain"
+}
+$MAVEN_HOME_NAME = ([System.Security.Cryptography.MD5]::Create().ComputeHash([byte[]][char[]]$distributionUrl) | ForEach-Object {$_.ToString("x2")}) -join ''
+$MAVEN_HOME = "$MAVEN_HOME_PARENT/$MAVEN_HOME_NAME"
+
+if (Test-Path -Path "$MAVEN_HOME" -PathType Container) {
+  Write-Verbose "found existing MAVEN_HOME at $MAVEN_HOME"
+  Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD"
+  exit $?
+}
+
+if (! $distributionUrlNameMain -or ($distributionUrlName -eq $distributionUrlNameMain)) {
+  Write-Error "distributionUrl is not valid, must end with *-bin.zip, but found $distributionUrl"
+}
+
+# prepare tmp dir
+$TMP_DOWNLOAD_DIR_HOLDER = New-TemporaryFile
+$TMP_DOWNLOAD_DIR = New-Item -Itemtype Directory -Path "$TMP_DOWNLOAD_DIR_HOLDER.dir"
+$TMP_DOWNLOAD_DIR_HOLDER.Delete() | Out-Null
+trap {
+  if ($TMP_DOWNLOAD_DIR.Exists) {
+    try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null }
+    catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" }
+  }
+}
+
+New-Item -Itemtype Directory -Path "$MAVEN_HOME_PARENT" -Force | Out-Null
+
+# Download and Install Apache Maven
+Write-Verbose "Couldn't find MAVEN_HOME, downloading and installing it ..."
+Write-Verbose "Downloading from: $distributionUrl"
+Write-Verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName"
+
+$webclient = New-Object System.Net.WebClient
+if ($env:MVNW_USERNAME -and $env:MVNW_PASSWORD) {
+  $webclient.Credentials = New-Object System.Net.NetworkCredential($env:MVNW_USERNAME, $env:MVNW_PASSWORD)
+}
+[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
+$webclient.DownloadFile($distributionUrl, "$TMP_DOWNLOAD_DIR/$distributionUrlName") | Out-Null
+
+# If specified, validate the SHA-256 sum of the Maven distribution zip file
+$distributionSha256Sum = (Get-Content -Raw "$scriptDir/.mvn/wrapper/maven-wrapper.properties" | ConvertFrom-StringData).distributionSha256Sum
+if ($distributionSha256Sum) {
+  if ($USE_MVND) {
+    Write-Error "Checksum validation is not supported for maven-mvnd. `nPlease disable validation by removing 'distributionSha256Sum' from your maven-wrapper.properties."
+  }
+  Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function Get-FileHash
+  if ((Get-FileHash "$TMP_DOWNLOAD_DIR/$distributionUrlName" -Algorithm SHA256).Hash.ToLower() -ne $distributionSha256Sum) {
+    Write-Error "Error: Failed to validate Maven distribution SHA-256, your Maven distribution might be compromised. If you updated your Maven version, you need to update the specified distributionSha256Sum property."
+  }
+}
+
+# unzip and move
+Expand-Archive "$TMP_DOWNLOAD_DIR/$distributionUrlName" -DestinationPath "$TMP_DOWNLOAD_DIR" | Out-Null
+Rename-Item -Path "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" -NewName $MAVEN_HOME_NAME | Out-Null
+try {
+  Move-Item -Path "$TMP_DOWNLOAD_DIR/$MAVEN_HOME_NAME" -Destination $MAVEN_HOME_PARENT | Out-Null
+} catch {
+  if (! (Test-Path -Path "$MAVEN_HOME" -PathType Container)) {
+    Write-Error "fail to move MAVEN_HOME"
+  }
+} finally {
+  try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null }
+  catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" }
+}
+
+Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD"