@esri/solutions-components 0.3.5 → 0.3.7

package/dist/solutions-components/p-cc815aca.js

@@ -3,19 +3,842 @@
  * Licensed under the Apache License, Version 2.0
  * http://www.apache.org/licenses/LICENSE-2.0
  */
-/** @license
- * Copyright 2022 Esri
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *    http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-var e,n;function t(t,o,c,r=!1){const u=parseInt(t),s=e[o],D=parseFloat(c.toString());if(Number.isNaN(D)||0===D)return"";const H=!0===r||"true"===r.toString().toLowerCase();let M;switch(u){case n.ALLIGATOR_CRACKING:M=i;break;case n.BLEEDING:M=l;break;case n.BLOCK_CRACKING:M=f;break;case n.BUMPS_SAGS:M=d;break;case n.CORRUGATION:M=b;break;case n.DEPRESSION:M=I;break;case n.EDGE_CRACKING:M=$;break;case n.REFLECTION_CRACKING:M=A;break;case n.LANE_SHOULDER_DROP_OFF:M=C;break;case n.LONG_TRANS_CRACKING:M=G;break;case n.PATCHING_UTIL_CUT_PATCHING:M=R;break;case n.POLISHED_AGGREGATE:M=N;break;case n.POTHOLES:M=h;break;case n.RAILROAD_CROSSING:M=p;break;case n.RUTTING:M=E;break;case n.SHOVING:M=O;break;case n.SLIPPAGE_CRACKING:M=k;break;case n.SWELL:M=L;break;case n.RAVELING:M=v;break;case n.WEATHERING:M=_}const S=M(s,Math.log10(D)),T=a(S),m=`${t}|${o}|${T}|${D}`;return H&&(console.log(`Deduct value: ${S}`),console.log(`Rounded deduct value: ${T}`),console.log(`Formatted devduct value (type|severity|roundedDV|density): ${m}`)),m}function o(e,n=!1){let t=e.indexOf("|")>-1?function(e,n){const t={},o=function(e){return e.split(",").reduce(((e,n)=>{const t=n.split("|"),o=t[0],c=t[1],r=parseFloat(t[2]),u=parseFloat(t[3]);return e[o]||(e[o]={}),e[o][c]={deductValue:r,density:u},e}),{})}(e),u=Object.keys(o).filter((e=>Object.keys(o[e]).length>1));return u.length>0&&u.forEach((e=>{let u,s,a,i,l,f;Object.keys(o[e]).forEach((n=>{"H"===n?(u=o[e][n].deductValue,i=o[e][n].density):"M"===n?(s=o[e][n].deductValue,l=o[e][n].density):(a=o[e][n].deductValue,f=o[e][n].density)}));const d=(i&&l&&f?c:r)(e,u,s,a,i,l,f,n);d&&(t[e]=d,n&&(console.log("updates"),console.log(t)))})),function(e,n){const t=[];return e.split(",").reduce(((e,o)=>{const c=o.split("|"),r=c[0],u=parseFloat(c[2]);return Object.keys(n).length>0&&n[r]?(t.push(r),e.push(...n[r]),delete n[r]):t.indexOf(r)<0&&e.push(u),e}),[])}(e,t)}(e,n):e.split(",").map((e=>parseFloat(e)));const o=!0===n||"true"===n.toString().toLowerCase();let u=0;if(t=t.filter((e=>Math.abs(e)>0)),t.length>0){const e=function(e,n){let t;const o=e.filter((e=>e>2));if(o.length<=1)t=o.reduce(((e,n)=>e+n),0),n&&(console.log("If none or only one individual deduct value is greater"),console.log("than two, the total value is used in place of the maximum CD"),console.log(`Max CDV: ${t}`));else{const o=e.sort(((e,n)=>n-e)),c=o[0],r=1+9/98*(100-c);if(n&&(console.log(`Deduct values sorted in descending order: ${o}`),console.log(`Highest deduct value: ${c}`),console.log(`Allowable number of deducts including fractions: ${r}`)),r<=10){const e=function(e,n){const t=n-Math.floor(n);return e.length<n?e:e.reduce(((e,o,c)=>(c+1<n?e.push(o):t>0&&e.push(a(o*t)),e)),[])}(o,r);n&&console.log(`Reduce deduct values to the m largest including the fractional part: ${e}`);const c=function(e,n){let t=e.length;const o=[];for(;t>=1;)n&&console.log(`vals: ${e}`),o.push(D(e,n)),t-=1,e.splice(t,1,2);return o}(e,n);t=Math.max(...c),n&&console.log(`Max CDV: ${t}`)}else n&&console.log("Allowable number of deducts including fractions (must be less than or equal to ten)")}return t}(t,o);u=100-a(e)}return u}function c(e,n,t,c,r,s,a,i){const l=o(`${n},${t},${c}`,!0);i&&(console.log("pci1"),console.log(l));const f=u(e,"M",(a+s).toString(),n,i),d=u(e,"H",(s+r).toString(),c,i),b=u(e,"H",(a+r).toString(),t,i),I=u(e,"H",(a+s+r).toString(),0,i);i&&(console.log("low med pci2"),console.log(f.pci),console.log("med high pci2"),console.log(d.pci),console.log("low high pci2"),console.log(b.pci),console.log("low med high pci2"),console.log(I.pci));const $=[f,d,b,I].reduce(((e,n)=>n.pci>l&&(!e||n.pci>e.pci)?n:e),void 0);return $?$.dv:void 0}function r(e,n,t,c,r,s,a,i){const l=o(`${n||t},${c||t}`,!0);i&&(console.log("pci1"),console.log(l));const f=r||s,d=u(e,f===r?"H":"M",(f+(a||s)).toString(),0,i);return i&&(console.log("pci2"),console.log(d.pci)),d.pci>l?d.dv:void 0}function u(e,n,c,r,u){const s=t(e,n,c).split("|"),a=parseFloat(s[2]);return{pci:o(`${s[2]},${r}`,u),dv:r?[a,r]:[a]}}function s(e,n){return n.reduce(((n,t,o)=>n+(0===o?t:1===o?t*e:t*Math.pow(e,o))),0)}function a(e){return Math.round(10*e)/10}function i(n,t){return s(t,n===e.H?[30.71,29.22,9.407,-6.981,-2.158,3.047,-.6578]:n===e.M?[21.62,21.32,5.194,-1.343,.2341]:[11.31,16.05,7.572,-1.471])}function l(n,t){return s(t,n===e.H?[5.343,6.927,7.926,4.265,-.7582]:n===e.M?[2.38,5.483,4.128,.8366,.03659,.1052]:[.01391,.5079,1.576,1.191,.1329,.03823])}function f(n,t){return s(t,n===e.H?[7.926,11.93,8.826,3.432,-1.382]:n===e.M?[2.587,9.142,6.647,-.455,-.2439,.1107]:[.646,4.002,4.2,.4987,-.06269])}function d(n,t){return s(t,n===e.H?[52.77,38.07,8.964,-.4148,-1.589,2.478]:n===e.M?[24.66,27.86,15.73,3.295,-5.27,5.921,7.959]:[8.768,13.79,7.064,7.455,6.041,-1.739,-1.371])}function b(n,t){return s(t,n===e.H?[34.21,21.59,1.863,6.141,-.687,-1.885,.4916]:n===e.M?[15.78,19.69,6.276,-2.124,.5868,.06045]:[2.173,5.609,5.976,-.7348,-.2172,1.494,-.5659])}function I(n,t){return s(t,n===e.H?[17.84,5.904,9.406,18.28,-2.753,-7.798,2.402]:n===e.M?[8.471,3.171,10.25,12.2,-.9687,-4.601,1.079]:[4.836,-.7572,4.786,12.39,1.233,-4.871,.9749])}function $(n,t){return s(t,n===e.H?[14.99,13.5,10.62,5.15,-1.792,-2.826]:n===e.M?[9.177,10.26,5.704,-.6812,-.8588,.2123]:[3.049,4.802,4.058,-.3556,-1.55,1.02])}function A(n,t){return s(t,n===e.H?[14.99,17.21,27.63,31.13,-20.94,-18.82,9.985]:n===e.M?[9.9193,10.88,8.073,14.8,-3.792,-9.583,3.651]:[2.356,6.664,3.717,-1.393,1.94,1.785,-.9707])}function C(n,t){return s(t,n===e.H?[7.549,6.907,7.284,9.304,2.064]:n===e.M?[4.02,1.744,14.36,15.92,-40.22,23.6]:[2.004,1.065,9.706,11.75,-27.52,15.04])}function G(n,t){return s(t,n===e.H?[19.56,24.06,12.12,9.336,1.532,-4.396]:n===e.M?[9.751,15.53,4.719,1.369,1.206,-1.164]:[2.347,9.074,8.424,-1.338,-1.873,1.144])}function R(n,t){return s(t,n===e.H?[20.15,16.55,5.415,10.77,3.257,-4.502]:n===e.M?[10.28,12.71,6.174,1.928,.6923,-.4673]:[2.523,6.892,5.702,2.407,.2185,-.8722])}function N(e,n){return s(n,"H"===e||"M"===e||"L"===e?[3.417,-26.82,71.15,-76.22,38.52,-6.904]:[])}function h(n,t){return s(t,n===e.H?[110.7,60.66,2.378,-2.664]:n===e.M?[90.47,60.41,-.1123,-4.746]:[58.19,40.53,2.884,-1.443,.1195])}function p(n,t){return s(t,n===e.H?[20,38.64,-62.82,193.6,-162.7,41.22]:n===e.M?[6.994,23.47,-52.3,167.3,-143.6,37.64]:[1.998,-.7488,13.8,-.7917,-1.981])}function E(n,t){return s(t,n===e.H?[27.61,25.19,8.557,1.65,-2.203]:n===e.M?[18.47,20.77,6.617,-1.13,-2.286]:[8.833,14.84,3.129,.1451,2.438,-1.279])}function O(n,t){return s(t,n===e.H?[18.7,20.17,10.3,4.694,1.331,-2.61]:n===e.M?[10.39,14.78,5.488,4.001,3.23,-2.387]:[4.002,10.66,6.332,-.5226,-.1923])}function k(n,t){return s(t,n===e.H?[19.73,32.21,25.87,-2.871,-10.55,1.496,.7393]:n===e.M?[11.38,18.55,18.38,1.628,-7.596,.5841,.5946]:[5.144,12.95,11.95,-.833,-2.995,1.325,-.2113])}function L(n,t){return s(t,n===e.H?[34,16.84,-23.09,41.17,-14.84]:n===e.M?[12,15.67,20.59,-28.33,21,-5.508]:[1.995,11.9,-12.83,16.74,-5.361])}function v(n,t){return s(t,n===e.H?[16.77,10.67,5.758,12.9,-.0633,-5.659,1.48]:n===e.M?[8.512,5.106,1.63,3.469,1.028,-1.211,.1938]:[])}function _(n,t){return s(t,n===e.H?[3.673,3.349,2.598,-1.233,2.754,2.434,-1.485]:n===e.M?[1.12,.9769,.93,-.5955,1.041,1.111,-.614]:[-.0386,-.0736,.834,1.63,-.0287,-.639,.1515])}function D(e,n){return function(e,n,t){const o=s(e,{7:[-9.482,.6045,3563e-7,-5448e-9],6:[-8.165,.5724,4266e-7,-4254e-9],5:[-7.932,.6091,3464e-7,-4265e-9],4:[-6.78,.6301,7376e-7,-6357e-9],3:[-5.015,.7546,-43e-5,-3075e-9],2:[-1.668,.7992,-3013e-7,-5214e-9],1:[1651e-18,1,-4249e-21,1149e-22]}[n>=7?7:n]);return t&&(console.log(`totalDV: ${e}`),console.log(`q: ${n}`),console.log(`CDV: ${o}`)),o}(e.reduce(((e,n)=>e+n),0),e.reduce(((e,n)=>n>2?e+1:e),0),n)}!function(e){e.H="H",e.M="M",e.L="L"}(e||(e={})),function(e){e[e.ALLIGATOR_CRACKING=1]="ALLIGATOR_CRACKING",e[e.BLEEDING=2]="BLEEDING",e[e.BLOCK_CRACKING=3]="BLOCK_CRACKING",e[e.BUMPS_SAGS=4]="BUMPS_SAGS",e[e.CORRUGATION=5]="CORRUGATION",e[e.DEPRESSION=6]="DEPRESSION",e[e.EDGE_CRACKING=7]="EDGE_CRACKING",e[e.REFLECTION_CRACKING=8]="REFLECTION_CRACKING",e[e.LANE_SHOULDER_DROP_OFF=9]="LANE_SHOULDER_DROP_OFF",e[e.LONG_TRANS_CRACKING=10]="LONG_TRANS_CRACKING",e[e.PATCHING_UTIL_CUT_PATCHING=11]="PATCHING_UTIL_CUT_PATCHING",e[e.POLISHED_AGGREGATE=12]="POLISHED_AGGREGATE",e[e.POTHOLES=13]="POTHOLES",e[e.RAILROAD_CROSSING=14]="RAILROAD_CROSSING",e[e.RUTTING=15]="RUTTING",e[e.SHOVING=16]="SHOVING",e[e.SLIPPAGE_CRACKING=17]="SLIPPAGE_CRACKING",e[e.SWELL=18]="SWELL",e[e.RAVELING=19]="RAVELING",e[e.WEATHERING=20]="WEATHERING"}(n||(n={}));export{n as E,e as a,t as b,o as c}
+/** @license
+ * Copyright 2022 Esri
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *    http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+/**
+ * Effect of the distresses on ride quality.
+ *
+ * L - Low. Individual bumps or settlements, or both, cause the vehicle to bounce slightly,
+ * but create little discomfort.
+ *
+ * M - Medium. Individual bumps or settlements, or both, cause the vehicle to bounce significantly,
+ * creating some discomfort.
+ *
+ * H - High. Individual bumps or settlements, or both, cause the vehicle to bounce excessively,
+ * creating substantial discomfort, safety hazard, or high potential vehicle damage.
+ *
+ * @returns Promise resolving when function is done
+ *
+ */
+var ESeverity;
+(function (ESeverity) {
+  ESeverity["H"] = "H";
+  ESeverity["M"] = "M";
+  ESeverity["L"] = "L";
+})(ESeverity || (ESeverity = {}));
+/**
+ * Type of distress as defined by ASTM standard
+ *
+ */
+var EDistressType;
+(function (EDistressType) {
+  EDistressType[EDistressType["ALLIGATOR_CRACKING"] = 1] = "ALLIGATOR_CRACKING";
+  EDistressType[EDistressType["BLEEDING"] = 2] = "BLEEDING";
+  EDistressType[EDistressType["BLOCK_CRACKING"] = 3] = "BLOCK_CRACKING";
+  EDistressType[EDistressType["BUMPS_SAGS"] = 4] = "BUMPS_SAGS";
+  EDistressType[EDistressType["CORRUGATION"] = 5] = "CORRUGATION";
+  EDistressType[EDistressType["DEPRESSION"] = 6] = "DEPRESSION";
+  EDistressType[EDistressType["EDGE_CRACKING"] = 7] = "EDGE_CRACKING";
+  EDistressType[EDistressType["REFLECTION_CRACKING"] = 8] = "REFLECTION_CRACKING";
+  EDistressType[EDistressType["LANE_SHOULDER_DROP_OFF"] = 9] = "LANE_SHOULDER_DROP_OFF";
+  EDistressType[EDistressType["LONG_TRANS_CRACKING"] = 10] = "LONG_TRANS_CRACKING";
+  EDistressType[EDistressType["PATCHING_UTIL_CUT_PATCHING"] = 11] = "PATCHING_UTIL_CUT_PATCHING";
+  EDistressType[EDistressType["POLISHED_AGGREGATE"] = 12] = "POLISHED_AGGREGATE";
+  EDistressType[EDistressType["POTHOLES"] = 13] = "POTHOLES";
+  EDistressType[EDistressType["RAILROAD_CROSSING"] = 14] = "RAILROAD_CROSSING";
+  EDistressType[EDistressType["RUTTING"] = 15] = "RUTTING";
+  EDistressType[EDistressType["SHOVING"] = 16] = "SHOVING";
+  EDistressType[EDistressType["SLIPPAGE_CRACKING"] = 17] = "SLIPPAGE_CRACKING";
+  EDistressType[EDistressType["SWELL"] = 18] = "SWELL";
+  EDistressType[EDistressType["RAVELING"] = 19] = "RAVELING";
+  EDistressType[EDistressType["WEATHERING"] = 20] = "WEATHERING";
+})(EDistressType || (EDistressType = {}));
+/**
+ * Calculate the deduct value for the given distress.
+ *
+ * @param type expects 1-19 as a string
+ * @param severity expects "H" | "M" | "L"
+ * @param density the calculated percent density ralative to the total sample area
+ * @param showDebugging used to control debugging messages to show the various
+ * calculations a required steps along the way.
+ * The main reason this is optional is that it provides no value when used within
+ * Survey123 as we have nowhere to see the messages and I wasn't sure if writing to a
+ * console in that context could have any negative side effects.
+ *
+ * @returns pipe delimited string: type|severity|roundedDeductValue|density
+ */
+function calculateDeductValue(type, severity, density, showDebugging = false) {
+  // When called from survey123 we will get the args as strings
+  // not sure if they could be numbers so a little extra conversion to make sure with the density
+  const _type = parseInt(type);
+  const _severity = ESeverity[severity];
+  const _density = parseFloat(density.toString());
+  // When called from survey123 all distress types and severities will be passed in
+  // We only need to calculate the deduct value if we have a valid density
+  if (Number.isNaN(_density) || _density === 0) {
+    return "";
+  }
+  const _showDebugging = showDebugging === true || showDebugging.toString().toLowerCase() === "true";
+  let calc;
+  switch (_type) {
+    case EDistressType.ALLIGATOR_CRACKING:
+      calc = _calcAlligator;
+      break;
+    case EDistressType.BLEEDING:
+      calc = _calcBleeding;
+      break;
+    case EDistressType.BLOCK_CRACKING:
+      calc = _calcBlockCracking;
+      break;
+    case EDistressType.BUMPS_SAGS:
+      calc = _calcBumpsSags;
+      break;
+    case EDistressType.CORRUGATION:
+      calc = _calcCorrugation;
+      break;
+    case EDistressType.DEPRESSION:
+      calc = _calcDepression;
+      break;
+    case EDistressType.EDGE_CRACKING:
+      calc = _calcEdgeCracking;
+      break;
+    case EDistressType.REFLECTION_CRACKING:
+      calc = _calcReflectionCracking;
+      break;
+    case EDistressType.LANE_SHOULDER_DROP_OFF:
+      calc = _calcLaneShoulderDropOff;
+      break;
+    case EDistressType.LONG_TRANS_CRACKING:
+      calc = _calcLongTransCracking;
+      break;
+    case EDistressType.PATCHING_UTIL_CUT_PATCHING:
+      calc = _calcPatchingUtilCutPatching;
+      break;
+    case EDistressType.POLISHED_AGGREGATE:
+      calc = _calcPolishedAggregate;
+      break;
+    case EDistressType.POTHOLES:
+      calc = _calcPotholes;
+      break;
+    case EDistressType.RAILROAD_CROSSING:
+      calc = _calcRailroadCrossing;
+      break;
+    case EDistressType.RUTTING:
+      calc = _calcRutting;
+      break;
+    case EDistressType.SHOVING:
+      calc = _calcShoving;
+      break;
+    case EDistressType.SLIPPAGE_CRACKING:
+      calc = _calcSlippageCracking;
+      break;
+    case EDistressType.SWELL:
+      calc = _calcSwell;
+      break;
+    case EDistressType.RAVELING:
+      calc = _calcRaveling;
+      break;
+    case EDistressType.WEATHERING:
+      calc = _calcWeathering;
+      break;
+  }
+  const dv = calc(_severity, Math.log10(_density));
+  const roundedDV = _round(dv);
+  const formattedDV = `${type}|${severity}|${roundedDV}|${_density}`;
+  if (_showDebugging) {
+    console.log(`Deduct value: ${dv}`);
+    console.log(`Rounded deduct value: ${roundedDV}`);
+    console.log(`Formatted devduct value (type|severity|roundedDV|density): ${formattedDV}`);
+  }
+  return formattedDV;
+}
+/**
+ * Calculate the pavement condition index (PCI)
+ *
+ * @param deductValues string of comma delimited values
+ * @param showDebugging used to control debugging messages to show the various
+ * calculations a required steps along the way.
+ * The main reason this is optional is that it provides no value when used within
+ * Survey123 as we have nowhere to see the messages and I wasn't sure if writing to a
+ * console in that context could have any negative side effects.
+ *
+ * @returns the calculated PCI
+ */
+function calculatePCI(deductValues, showDebugging = false) {
+  // When called from survey123 we will get the args as strings
+  // When comparing multi-severities calculatePCI will be called multiple times
+  // When called from _evaluateMultiSeverity we will just recieve a comma delimited string
+  // When its just comma delimited we don't need to re-evaluate the multiple severities
+  let _deductValues = deductValues.indexOf("|") > -1 ?
+    _evaluateMultiSeverity(deductValues, showDebugging) :
+    deductValues.split(",").map(dv => parseFloat(dv));
+  const _showDebugging = showDebugging === true || showDebugging.toString().toLowerCase() === "true";
+  let pci = 0;
+  // filter out non-numbers
+  _deductValues = _deductValues.filter(dv => Math.abs(dv) > 0);
+  if (_deductValues.length > 0) {
+    const maxCDV = _getMaxCDV(_deductValues, _showDebugging);
+    pci = 100 - _round(maxCDV);
+  }
+  return pci;
+}
+/**
+ * Determine if corrections are required when we have multiple severities of a single distress type.
+ *
+ * @param deductValues string of comma delimited values e.g. "1|L|10|0.52,1|H|7|0.58"
+ * @param showDebugging used to control debugging messages to show the various
+ * calculations a required steps along the way.
+ *
+ * @returns an object that will contain any corrections for the current distress type
+ */
+function _evaluateMultiSeverity(deductValues, showDebugging) {
+  const updates = {};
+  const _dvObject = _parseDeductValues(deductValues);
+  const multiSeverityKeys = Object.keys(_dvObject).filter(k => Object.keys(_dvObject[k]).length > 1);
+  if (multiSeverityKeys.length > 0) {
+    multiSeverityKeys.forEach(k => {
+      let hDeductValue;
+      let mDeductValue;
+      let lDeductValue;
+      let hDensity;
+      let mDensity;
+      let lDensity;
+      // need to know if 2 or 3 severity case
+      Object.keys(_dvObject[k]).forEach(_k => {
+        if (_k === "H") {
+          hDeductValue = _dvObject[k][_k].deductValue;
+          hDensity = _dvObject[k][_k].density;
+        }
+        else if (_k === "M") {
+          mDeductValue = _dvObject[k][_k].deductValue;
+          mDensity = _dvObject[k][_k].density;
+        }
+        else {
+          lDeductValue = _dvObject[k][_k].deductValue;
+          lDensity = _dvObject[k][_k].density;
+        }
+      });
+      const func = (hDensity && mDensity && lDensity) ?
+        _getThreeSeverityCaseUpdates : _getTwoSeverityCaseUpdates;
+      const update = func(k, hDeductValue, mDeductValue, lDeductValue, hDensity, mDensity, lDensity, showDebugging);
+      if (update) {
+        updates[k] = update;
+        if (showDebugging) {
+          console.log("updates");
+          console.log(updates);
+        }
+      }
+    });
+  }
+  return _getFinalDeductValues(deductValues, updates);
+}
+/**
+ * Determine if corrections are required when we have 3 severities of a single distress type.
+ *
+ * @param type the distress type 1-19 as a string
+ * @param hDeductValue high severity deduct value
+ * @param mDeductValue med severity deduct value
+ * @param lDeductValue low severity deduct value
+ * @param hDensity high severity density
+ * @param mDensity med severity density
+ * @param lDensity low severity density
+ * @param showDebugging used to control debugging messages to show the various
+ * calculations a required steps along the way.
+ *
+ * @returns undefined or an object that will contain any corrections for the current distress type
+ */
+function _getThreeSeverityCaseUpdates(type, hDeductValue, mDeductValue, lDeductValue, hDensity, mDensity, lDensity, showDebugging) {
+  const pci1 = calculatePCI(`${hDeductValue},${mDeductValue},${lDeductValue}`, true);
+  if (showDebugging) {
+    console.log("pci1");
+    console.log(pci1);
+  }
+  const lm = lDensity + mDensity;
+  const lmPCI2 = _getPCI2(type, "M", lm.toString(), hDeductValue, showDebugging);
+  const mh = mDensity + hDensity;
+  const mhPCI2 = _getPCI2(type, "H", mh.toString(), lDeductValue, showDebugging);
+  const lh = lDensity + hDensity;
+  const lhPCI2 = _getPCI2(type, "H", lh.toString(), mDeductValue, showDebugging);
+  const lmh = lDensity + mDensity + hDensity;
+  const lmhPCI2 = _getPCI2(type, "H", lmh.toString(), 0, showDebugging);
+  if (showDebugging) {
+    console.log("low med pci2");
+    console.log(lmPCI2.pci);
+    console.log("med high pci2");
+    console.log(mhPCI2.pci);
+    console.log("low high pci2");
+    console.log(lhPCI2.pci);
+    console.log("low med high pci2");
+    console.log(lmhPCI2.pci);
+  }
+  const pcis = [lmPCI2, mhPCI2, lhPCI2, lmhPCI2];
+  const highest = pcis.reduce((prev, cur) => {
+    return cur.pci > pci1 && (!prev || cur.pci > prev.pci) ? cur : prev;
+  }, undefined);
+  return highest ? highest.dv : undefined;
+}
+/**
+ * Determine if corrections are required when we have 2 severities of a single distress type.
+ *
+ * @param type the distress type 1-19 as a string
+ * @param hDeductValue high severity deduct value
+ * @param mDeductValue med severity deduct value
+ * @param lDeductValue low severity deduct value
+ * @param hDensity high severity density
+ * @param mDensity med severity density
+ * @param lDensity low severity density
+ * @param showDebugging used to control debugging messages to show the various
+ * calculations a required steps along the way.
+ *
+ * @returns undefined or an object that will contain any corrections for the current distress type
+ */
+function _getTwoSeverityCaseUpdates(type, hDeductValue, mDeductValue, lDeductValue, hDensity, mDensity, lDensity, showDebugging) {
+  const hDV = hDeductValue || mDeductValue;
+  const lDV = lDeductValue || mDeductValue;
+  const pci1 = calculatePCI(`${hDV},${lDV}`, true);
+  if (showDebugging) {
+    console.log("pci1");
+    console.log(pci1);
+  }
+  const hDen = hDensity || mDensity;
+  const lDen = lDensity || mDensity;
+  const sumDen = hDen + lDen;
+  const highestSeverity = hDen === hDensity ? "H" : "M";
+  const pci2 = _getPCI2(type, highestSeverity, sumDen.toString(), 0, showDebugging);
+  if (showDebugging) {
+    console.log("pci2");
+    console.log(pci2.pci);
+  }
+  return pci2.pci > pci1 ? pci2.dv : undefined;
+}
+/**
+ * Used to test for highest PCI when we have multiple severity cases for a single distress type.
+ *
+ * @param type the distress type 1-19 as a string
+ * @param severity expects "H" | "M" | "L"
+ * @param density the calculated percent density ralative to the total sample area
+ * @param secondDeductValue optional deduct value will be 0 for all 2 severity cases and will be a non 0 number for 3 severity cases
+ * @param showDebugging used to control debugging messages to show the various
+ * calculations a required steps along the way.
+ *
+ * @returns ICorrection that contains the new PCI as well as the deduct values that should be used for corrections
+ */
+function _getPCI2(type, severity, density, secondDeductValue, showDebugging) {
+  const deductValue = calculateDeductValue(type, severity, density);
+  const splitVal = deductValue.split("|");
+  const newDV = parseFloat(splitVal[2]);
+  return {
+    pci: calculatePCI(`${splitVal[2]},${secondDeductValue}`, showDebugging),
+    dv: secondDeductValue ? [newDV, secondDeductValue] : [newDV]
+  };
+}
+/**
+ * Parse the deduct value string into individual values for type, severity, deduct value, and density
+ *
+ * @param deductValues string of comma delimited values for type, severity, deduct value, and density
+ *
+ * @returns an object with the parsed values
+ */
+function _parseDeductValues(deductValues) {
+  return deductValues.split(",").reduce((prev, cur) => {
+    const splitVal = cur.split("|");
+    const type = splitVal[0];
+    const severity = splitVal[1];
+    const deductValue = parseFloat(splitVal[2]);
+    const density = parseFloat(splitVal[3]);
+    if (!prev[type]) {
+      prev[type] = {};
+    }
+    prev[type][severity] = {
+      deductValue,
+      density
+    };
+    return prev;
+  }, {});
+}
+/**
+ * Replace any deduct values for the given distress types when it is determined that corrections
+ * are required for a multi-severity case
+ *
+ * @param deductValues string of comma delimited values for type, severity, deduct value, and density
+ * @param updates will contain the new corrected deduct value(s) that should be substituted for the original deduct value
+ *
+ * @returns an object with the parsed and updated deduct values to use for final PCI calculation
+ */
+function _getFinalDeductValues(deductValues, updates) {
+  const skipAdditionalTypes = [];
+  return deductValues.split(",").reduce((prev, cur) => {
+    //0: type, 1: severity, 2: deductValue, 3: density
+    const splitVal = cur.split("|");
+    const type = splitVal[0];
+    const deductValue = parseFloat(splitVal[2]);
+    if (Object.keys(updates).length > 0 && updates[type]) {
+      skipAdditionalTypes.push(type);
+      prev.push(...updates[type]);
+      delete (updates[type]);
+    }
+    else if (skipAdditionalTypes.indexOf(type) < 0) {
+      prev.push(deductValue);
+    }
+    return prev;
+  }, []);
+}
+/**
+ * Executes the polynomial equation using the provided values and density.
+ * In the ASTM standard this is the step represented by finding the values
+ * on the plotted graphs.
+ *
+ * @returns the calculated deduct value
+ */
+function _calc(density, vals) {
+  return vals.reduce((prev, cur, i) => {
+    return prev += i === 0 ? cur :
+      i === 1 ? (cur * density) :
+        (cur * Math.pow(density, i));
+  }, 0);
+}
+/**
+ * Round to the nerest decimal in the 10ths place
+ */
+function _round(v) {
+  return Math.round(v * 10) / 10;
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcAlligator(severity, density) {
+  const vals = severity === ESeverity.H ? [30.71, 29.22, 9.407, -6.981, -2.158, 3.047, -0.6578] :
+    severity === ESeverity.M ? [21.62, 21.32, 5.194, -1.343, 0.2341] :
+      [11.31, 16.05, 7.572, -1.471];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcBleeding(severity, density) {
+  const vals = severity === ESeverity.H ? [5.343, 6.927, 7.926, 4.265, -0.7582] :
+    severity === ESeverity.M ? [2.38, 5.483, 4.128, 0.8366, 0.03659, 0.1052] :
+      [0.01391, 0.5079, 1.576, 1.191, 0.1329, 0.03823];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcBlockCracking(severity, density) {
+  const vals = severity === ESeverity.H ? [7.926, 11.93, 8.826, 3.432, -1.382] :
+    severity === ESeverity.M ? [2.587, 9.142, 6.647, -0.455, -0.2439, 0.1107] :
+      [0.646, 4.002, 4.2, 0.4987, -0.06269];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcBumpsSags(severity, density) {
+  const vals = severity === ESeverity.H ? [52.77, 38.07, 8.964, -0.4148, -1.589, 2.478] :
+    severity === ESeverity.M ? [24.66, 27.86, 15.73, 3.295, -5.27, 5.921, 7.959] :
+      [8.768, 13.79, 7.064, 7.455, 6.041, -1.739, -1.371];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcCorrugation(severity, density) {
+  const vals = severity === ESeverity.H ? [34.21, 21.59, 1.863, 6.1410, -0.687, -1.885, 0.4916] :
+    severity === ESeverity.M ? [15.78, 19.69, 6.276, -2.124, 0.5868, 0.06045] :
+      [2.173, 5.609, 5.976, -0.7348, -0.2172, 1.494, -0.5659];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcDepression(severity, density) {
+  const vals = severity === ESeverity.H ? [17.84, 5.904, 9.406, 18.28, -2.753, -7.798, 2.402] :
+    severity === ESeverity.M ? [8.471, 3.171, 10.25, 12.2, -0.9687, -4.601, 1.079] :
+      [4.836, -0.7572, 4.786, 12.39, 1.233, -4.871, 0.9749];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcEdgeCracking(severity, density) {
+  const vals = severity === ESeverity.H ? [14.99, 13.5, 10.62, 5.15, -1.792, -2.826] :
+    severity === ESeverity.M ? [9.177, 10.26, 5.704, -0.6812, -0.8588, 0.2123] :
+      [3.049, 4.802, 4.058, -0.3556, -1.55, 1.02];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcReflectionCracking(severity, density) {
+  const vals = severity === ESeverity.H ? [14.99, 17.21, 27.63, 31.13, -20.94, -18.82, 9.985] :
+    severity === ESeverity.M ? [9.9193, 10.88, 8.073, 14.8, -3.792, -9.583, 3.651] :
+      [2.356, 6.664, 3.717, -1.393, 1.94, 1.785, -0.9707];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcLaneShoulderDropOff(severity, density) {
+  const vals = severity === ESeverity.H ? [7.549, 6.907, 7.284, 9.304, 2.064] :
+    severity === ESeverity.M ? [4.02, 1.744, 14.36, 15.92, -40.22, 23.6] :
+      [2.004, 1.065, 9.706, 11.75, -27.52, 15.04];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcLongTransCracking(severity, density) {
+  const vals = severity === ESeverity.H ? [19.56, 24.06, 12.12, 9.336, 1.532, -4.396] :
+    severity === ESeverity.M ? [9.751, 15.53, 4.719, 1.369, 1.206, -1.164] :
+      [2.347, 9.074, 8.424, -1.338, -1.873, 1.144];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcPatchingUtilCutPatching(severity, density) {
+  const vals = severity === ESeverity.H ? [20.15, 16.55, 5.415, 10.77, 3.257, -4.502] :
+    severity === ESeverity.M ? [10.28, 12.71, 6.174, 1.928, 0.6923, -0.4673] :
+      [2.523, 6.892, 5.702, 2.407, 0.2185, -0.8722];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcPolishedAggregate(severity, density) {
+  const vals = severity === "H" || severity === "M" || severity === "L" ?
+    [3.417, -26.82, 71.15, -76.22, 38.52, -6.904] : [];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcPotholes(severity, density) {
+  const vals = severity === ESeverity.H ? [110.7, 60.66, 2.378, -2.664] :
+    severity === ESeverity.M ? [90.47, 60.41, -0.1123, -4.746] :
+      [58.19, 40.53, 2.884, -1.443, 0.1195];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcRailroadCrossing(severity, density) {
+  const vals = severity === ESeverity.H ? [20, 38.64, -62.82, 193.6, -162.7, 41.22] :
+    severity === ESeverity.M ? [6.994, 23.47, -52.3, 167.3, -143.6, 37.64] :
+      [1.998, -0.7488, 13.8, -0.7917, -1.981];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcRutting(severity, density) {
+  const vals = severity === ESeverity.H ? [27.61, 25.19, 8.557, 1.65, -2.2030] :
+    severity === ESeverity.M ? [18.47, 20.77, 6.617, -1.13, -2.286] :
+      [8.833, 14.84, 3.129, 0.1451, 2.438, -1.279];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcShoving(severity, density) {
+  const vals = severity === ESeverity.H ? [18.7, 20.17, 10.3, 4.694, 1.331, -2.61] :
+    severity === ESeverity.M ? [10.39, 14.78, 5.488, 4.001, 3.23, -2.387] :
+      [4.002, 10.66, 6.332, -0.5226, -0.1923];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcSlippageCracking(severity, density) {
+  const vals = severity === ESeverity.H ? [19.73, 32.21, 25.87, -2.871, -10.55, 1.496, 0.7393] :
+    severity === ESeverity.M ? [11.38, 18.55, 18.38, 1.628, -7.596, 0.5841, 0.5946] :
+      [5.144, 12.95, 11.95, -0.833, -2.995, 1.325, -0.2113];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcSwell(severity, density) {
+  const vals = severity === ESeverity.H ? [34, 16.84, -23.09, 41.17, -14.84] :
+    severity === ESeverity.M ? [12, 15.67, 20.59, -28.33, 21, -5.508] :
+      [1.995, 11.9, -12.83, 16.74, -5.361];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcRaveling(severity, density) {
+  const vals = severity === ESeverity.H ? [16.77, 10.67, 5.758, 12.9, -0.0633, -5.659, 1.48] :
+    severity === ESeverity.M ? [8.512, 5.106, 1.63, 3.469, 1.028, -1.211, 0.1938] :
+      [];
+  return _calc(density, vals);
+}
+/**
+ * Execute the deduct value calculation for the distress type
+ *
+ * @param severity The severity of the distress type
+ * @param density percent density of the distress type
+ *
+ * @returns the calculated deduct value
+ */
+function _calcWeathering(severity, density) {
+  const vals = severity === ESeverity.H ? [3.673, 3.349, 2.598, -1.233, 2.754, 2.434, -1.485] :
+    severity === ESeverity.M ? [1.12, 0.9769, 0.93, -0.5955, 1.041, 1.111, -0.614] :
+      [-0.0386, -0.0736, 0.834, 1.63, -0.0287, -0.639, 0.1515];
+  return _calc(density, vals);
+}
+/**
+ * Determine maximum Corrected Deduct Value (CDV) iteratively
+ *
+ * @param deductValues The calculated deduct values that will be used to determine max CDV
+ * @param showDebugging used to optionally show debugging messages
+ *
+ * @returns the max CDV value
+ */
+function _getMaxCDV(deductValues, showDebugging) {
+  let maxCDV;
+  // If none or only one individual deduct value is greater
+  // than two, the total value is used in place of the maximum CD
+  const valuesGreaterThan2 = deductValues.filter(deductValue => deductValue > 2);
+  if (valuesGreaterThan2.length <= 1) {
+    maxCDV = valuesGreaterThan2.reduce((prev, cur) => {
+      prev += cur;
+      return prev;
+    }, 0);
+    if (showDebugging) {
+      console.log("If none or only one individual deduct value is greater");
+      console.log("than two, the total value is used in place of the maximum CD");
+      console.log(`Max CDV: ${maxCDV}`);
+    }
+  }
+  else {
+    // sort in descending order (section 9.5.2 in ASTM doc)
+    const sortedDVs = deductValues.sort((a, b) => b - a);
+    // Determine the allowable number of deducts, m (section 9.5.3 in ASTM doc)
+    const highestDV = sortedDVs[0];
+    // m = allowable number of deducts including fractions (must be less than or equal to ten)
+    const m = 1 + (9 / 98) * (100 - highestDV);
+    if (showDebugging) {
+      console.log(`Deduct values sorted in descending order: ${sortedDVs}`);
+      console.log(`Highest deduct value: ${highestDV}`);
+      console.log(`Allowable number of deducts including fractions: ${m}`);
+    }
+    // TODO they mention (must be less than or equal to ten) but don't say what happens if its over
+    if (m <= 10) {
+      const vals = _reduceDeductValues(sortedDVs, m);
+      if (showDebugging) {
+        console.log(`Reduce deduct values to the m largest including the fractional part: ${vals}`);
+      }
+      // iteratively determined cdv values
+      const cdvs = _getCDVs(vals, showDebugging);
+      maxCDV = Math.max(...cdvs);
+      if (showDebugging) {
+        console.log(`Max CDV: ${maxCDV}`);
+      }
+    }
+    else {
+      if (showDebugging) {
+        console.log("Allowable number of deducts including fractions (must be less than or equal to ten)");
+      }
+    }
+  }
+  return maxCDV;
+}
+/**
+ * Reduce deduct values to the m largest including the fractional part
+ *
+ * @param sortedDVs individual deduct values in descending order
+ * @param m allowable number of deducts (9.5.3 in ASTM standard)
+ *
+ * @returns updated deduct values
+ */
+function _reduceDeductValues(sortedDVs, m) {
+  const fractionalPart = m - Math.floor(m);
+  // If less than m deduct values are available, all of the deduct values are used
+  return sortedDVs.length < m ? sortedDVs :
+    sortedDVs.reduce((prev, cur, i) => {
+      if (i + 1 < m) {
+        prev.push(cur);
+      }
+      else if (fractionalPart > 0) {
+        prev.push(_round(cur * fractionalPart));
+      }
+      return prev;
+    }, []);
+}
+/**
+ * Reduce the smallest individual deduct value greater to 2.0 and repeat
+ *
+ * @param vals the list of deduct values
+ * @param showDebugging optionally show debugging messages
+ *
+ * @returns array of CDV values
+ */
+function _getCDVs(vals, showDebugging) {
+  let len = vals.length;
+  const cdvs = [];
+  while (len >= 1) {
+    if (showDebugging) {
+      console.log(`vals: ${vals}`);
+    }
+    cdvs.push(_getCDV(vals, showDebugging));
+    len -= 1;
+    vals.splice(len, 1, 2);
+  }
+  return cdvs;
+}
+/**
+ * Determine the total and max number deducts higher than two and calculate the CDV
+ *
+ * @param vals the list of deduct values
+ * @param showDebugging optionally show debugging messages
+ *
+ * @returns the calculated CDV
+ */
+function _getCDV(vals, showDebugging) {
+  // section 9.5.5.1 in ASTM doc
+  const totalDV = vals.reduce((prev, cur) => prev += cur, 0);
+  // section 9.5.5.2 in ASTM doc
+  // the number of deducts with a value greater than 2.0
+  const q = vals.reduce((prev, cur) => cur > 2 ? prev + 1 : prev, 0);
+  // section 9.5.5.3 in ASTM doc
+  return _calcCDV(totalDV, q, showDebugging);
+}
+/**
+ * Determine the total and max number deducts higher than two and calculate the CDV
+ *
+ * @param total the sum of all deduct values
+ * @param q the number of deducts with a value greater than 2.0
+ * @param showDebugging optionally show debugging messages
+ *
+ * @returns the calculated CDV
+ */
+function _calcCDV(total, q, showDebugging) {
+  // Determine the CDV from total deduct value and q
+  const vals2 = {
+    7: [-9.482, 0.6045, 0.0003563, -5.448e-06],
+    6: [-8.165, 0.5724, 0.0004266, -4.254e-06],
+    5: [-7.932, 0.6091, 0.0003464, -4.265e-06],
+    4: [-6.78, 0.6301, 0.0007376, -6.357e-06],
+    3: [-5.015, 0.7546, -0.00043, -3.075e-06],
+    2: [-1.668, 0.7992, -0.0003013, -5.214e-06],
+    1: [1.651e-15, 1, -4.249e-18, 1.149e-19]
+  };
+  const cdv = _calc(total, vals2[q >= 7 ? 7 : q]);
+  if (showDebugging) {
+    console.log(`totalDV: ${total}`);
+    console.log(`q: ${q}`);
+    console.log(`CDV: ${cdv}`);
+  }
+  return cdv;
+}
+
+export { EDistressType as E, ESeverity as a, calculateDeductValue as b, calculatePCI as c };