@enyo-energy/energy-app-sdk 1.34.0 → 1.35.0

package/README.md

@@ -1653,6 +1653,7 @@ A closed, SDK-defined set of user-facing controls the active energy manager hono
 | `BatteryPvPriorityTargetSocPercent` | number \| `null`, **%** target the battery is charged to from PV before other surplus consumers (absent / `null` = disabled) |
 | `BatteryDischargeBlockAboveHomeConsumptionW` | number \| `null`, **W** home consumption above which the battery may not discharge (absent / `null` = disabled) |
 | `HeatpumpControl` | boolean |
+| `HeatpumpEcoModeInExpensiveTimes` | boolean, off by default — switch the heat pump to its eco setpoint while electricity is expensive |
 | `HeatingRodControl` | boolean |
 | `HeatingRodMode` | `pv-surplus-only` \| `boost` |
 | `HeatingRodBatteryDischargeSocLimitPercent` | number \| `null`, **%** floor the battery may feed the heating rod down to (absent / `null` = disabled) |
@@ -1706,7 +1707,8 @@ Three things to get right:
 - **The heating rod may draw from the battery only down to a floor, and only when asked.** `HeatingRodBatteryDischargeSocLimitPercent` (`80` = the rod may use the battery while it holds more than 80 %) is disabled while absent or `null`. It applies under both heating rod modes — under `pv-surplus-only` the battery above the floor counts as supply alongside PV, still never a grid import. It needs `batteryControl` to be enforced, and should not lie below `BatteryPvPriorityTargetSocPercent`; the validator warns on both. A consumer held back by it carries the command reason `BatteryPvPriority` (category `PvSurplus`) with `context.batteryPvPriority.targetSocPercent` and `socPercent`.
 - **The battery can be blocked from discharging under a heavy load.** `BatteryDischargeBlockAboveHomeConsumptionW` (`11000` = no discharge while the house draws more than 11 kW) keeps a sauna or an oven from emptying the battery in minutes. It is in **watts** — the validator warns below 100 W, which catches a kW value. Home consumption means the household plus every appliance the energy manager does **not** track — the same quantity as `homeConsumptionW` in the home consumption timeseries. Tracked appliances (wallbox, heat pump, heating rod, …) and the battery's own charging are excluded, so a charging car alone never trips the block. The block wins over the EV and heating rod discharge permissions; charging is unaffected. Disabled while absent or `null`. A battery held by it carries `HomeConsumptionHigh` with `context.batteryDischargeBlock.thresholdW` and `powerW` set to the current consumption.
 - **Grid-optimised EV charging is about the grid, not the bill.** `GridOptimizedEvCharging` adds no charge mode. It only affects `cost-optimized` sessions while the tariff is static or time-of-use (no effect under a dynamic one): the grid energy PV does not cover is placed in the hours with the lowest EPEX spot price before the deadline — the spot price as a proxy for grid load — instead of as late as possible or in the tariff's cheap windows. PV still comes first, the deadline still holds, and a session's price ceiling still applies against the customer's own tariff. On a time-of-use tariff a low-load hour can be a more expensive one; that is the trade the owner opts into.
-- **Fifteen settings are gated by another** (`heatingRodMode` needs `heatingRodControl`, `priceLimitCtPerKwh` only applies under `priceLimitMode: 'ct-per-kwh'`, …). The tree is exported as `ENERGY_MANAGER_SETTING_DEPENDENCIES`, with two helpers over it: `getEnergyManagerSettingDependency(setting)` returns the direct gate and the value it must hold (or `null` for an ungated root), and `isEnergyManagerSettingActive(setting, values)` walks the whole chain — the gates are now two deep, so a Wh budget is live only when the mode is `fixed-wh` *and* battery control is on.
+- **Eco mode in expensive times switches setpoints, not temperatures.** `HeatpumpEcoModeInExpensiveTimes` (needs `heatpumpControl`) lets the energy manager send `HeatpumpProgramSwitchV3` with `mode: Eco` to every zone listing `eco` in `supportedProgramModes` while the tariff is expensive, and `mode: Program` once it is not. The user's own eco temperature applies (`programModeTemperaturesC`); the energy manager only chooses *when*. "Expensive" comes from the consumption tariff — the dearest slots under a dynamic tariff, the high-price windows under a time-of-use one; under a static tariff the setting has no effect, as it has on heat pumps without `ProgramSwitch`. Each such switch carries `ElectricityPriceAboveThreshold` (category `EnergyPrice`) with `electricityPricePerKwh`.
+- **Sixteen settings are gated by another** (`heatingRodMode` needs `heatingRodControl`, `priceLimitCtPerKwh` only applies under `priceLimitMode: 'ct-per-kwh'`, …). The tree is exported as `ENERGY_MANAGER_SETTING_DEPENDENCIES`, with two helpers over it: `getEnergyManagerSettingDependency(setting)` returns the direct gate and the value it must hold (or `null` for an ungated root), and `isEnergyManagerSettingActive(setting, values)` walks the whole chain — the gates are now two deep, so a Wh budget is live only when the mode is `fixed-wh` *and* battery control is on.
 - **`priceLimitCtPerKwh` is in cents**, unlike the SDK's machine-readable price fields (`electricityPricePerKwh`, EUR/kWh). Divide by 100 when comparing. `validateEnergyManagerSettingsState()` warns on values outside a plausible ct band, which catches the mix-up.
 - **A price ceiling is one mode plus its parameter**, the same shape as the battery-to-EV one. `PriceLimitMode` picks how the ceiling is expressed — an absolute `ct-per-kwh` or a relative `cheapest-share` — and each value is read only under its own mode; the mode being absent means no ceiling at all. A relative ceiling ranks the price intervals *known* for the day and treats the cheapest `n` % as importable (the same rule as the `cheapest-share-of-day` automation trigger), so its effective threshold moves when tomorrow's prices publish — re-evaluate it rather than resolving it once.
 
@@ -3216,6 +3218,7 @@ Switches one heating circuit or DHW zone to its **comfort** or **eco** setpoint
 - **One zone per message**, answered with a plain `CommandAcknowledgeV1`.
 - **Ending and safety net.** `mode: Program` ends a switch (idempotent). A switch to comfort or eco holds until `untilIso` (at most `HEATPUMP_PROGRAM_SWITCH_MAX_MINUTES` = 30 min ahead); the energy manager re-sends about every 15 min while it should hold. When `untilIso` passes without a newer message, the base class calls `handleHeatpumpProgramSwitch` with `mode: Program` and `cause: HeatpumpProgramSwitchCauseEnum.Expired` — so after a restart of either side a zone is back on its program within 30 min, and the app stores nothing.
 - **Alongside `HeatpumpControlV3`.** The two run side by side: the mode sets the base, an action raises above it (eco 20 °C + room action +1 K = 21 °C).
+- **Owner's consent for price-driven eco.** An energy manager switches zones to eco for price reasons only while the general setting `heatpumpEcoModeInExpensiveTimes` (and `heatpumpControl`) is `true` — see [General settings](#general-settings).
 - **Validation** (run by the base class before the handler, or `validateHeatpumpProgramSwitch(data, metadata)` directly): target `Room` / `Dhw`, a known mode, a valid `untilIso` for comfort / eco (`Rejected`); `ProgramSwitch` declared and the mode listed for the zone (`NotSupported`); a known zone index (`Rejected`).
 
 #### HeatpumpFlexibilityAnnouncementV3

package/dist/cjs/implementations/energy-manager-settings/energy-manager-settings-validators.cjs

@@ -208,7 +208,8 @@ function validateEnergyManagerSettingsState(state) {
     const values = state.values ?? {};
     // ── value formats ──────────────────────────────────────────────────────
     for (const key of ['batteryControl', 'batteryChargeFromGrid', 'heatpumpControl',
-        'heatingRodControl', 'chargerControl', 'gridOptimizedEvCharging']) {
+        'heatpumpEcoModeInExpensiveTimes', 'heatingRodControl', 'chargerControl',
+        'gridOptimizedEvCharging']) {
         if (values[key] !== undefined && typeof values[key] !== 'boolean') {
             errors.push(`\`${key}\` must be a boolean when set.`);
         }

package/dist/cjs/types/enyo-data-bus-value.d.cts

@@ -4583,6 +4583,11 @@ export interface EnyoDataBusHeatpumpControlStatusV3 extends EnyoDataBusMessage {
  * with a fresh `untilIso`. So if the energy manager or the app restarts, a
  * zone is back on its program after at most that long.
  *
+ * **Price-driven eco needs the owner's consent.** Switch a zone to eco because
+ * electricity is expensive only while the general setting
+ * {@link EnergyManagerSettingValues.heatpumpEcoModeInExpensiveTimes} (and
+ * {@link EnergyManagerSettingValues.heatpumpControl}) is `true`.
+ *
  * **Together with {@link EnyoDataBusHeatpumpControlV3}.** The two run side by
  * side. The mode sets the base and an action raises above it: eco at 20 °C
  * plus a room action of +1 K gives 21 °C.

package/dist/cjs/types/enyo-energy-manager-settings.cjs

@@ -61,8 +61,13 @@ var EnergyManagerSettingEnum;
      */
     EnergyManagerSettingEnum["BatteryDischargeBlockAboveHomeConsumptionW"] = "battery-discharge-block-above-home-consumption-w";
     // ── Heat pump ──────────────────────────────────────────────────────────
-    /** Whether the energy manager may steer the heat pump. */
+    /** Whether the energy manager may steer the heat pump. Gates {@link HeatpumpEcoModeInExpensiveTimes}. */
     EnergyManagerSettingEnum["HeatpumpControl"] = "heatpump-control";
+    /**
+     * Whether the heat pump is switched to its eco / reduced setpoint while
+     * electricity is expensive.
+     */
+    EnergyManagerSettingEnum["HeatpumpEcoModeInExpensiveTimes"] = "heatpump-eco-mode-in-expensive-times";
     // ── Heating rod ────────────────────────────────────────────────────────
     /** Whether the energy manager may steer the heating rod. Gates {@link HeatingRodMode}. */
     EnergyManagerSettingEnum["HeatingRodControl"] = "heating-rod-control";
@@ -238,7 +243,7 @@ var EnergyManagerHeatingRodModeEnum;
 /**
  * Which settings are gated by which, as data.
  *
- * Fifteen of the nineteen settings only mean anything while another one holds a specific
+ * Sixteen of the twenty settings only mean anything while another one holds a specific
  * value. Encoding that here rather than in prose gives the cockpit a single
  * source of truth for greying out dependent controls, and lets
  * `validateEnergyManagerSettingsState()` flag values that can never take effect.
@@ -280,6 +285,10 @@ exports.ENERGY_MANAGER_SETTING_DEPENDENCIES = {
         requires: EnergyManagerSettingEnum.BatteryControl,
         equals: true,
     },
+    [EnergyManagerSettingEnum.HeatpumpEcoModeInExpensiveTimes]: {
+        requires: EnergyManagerSettingEnum.HeatpumpControl,
+        equals: true,
+    },
     [EnergyManagerSettingEnum.HeatingRodMode]: {
         requires: EnergyManagerSettingEnum.HeatingRodControl,
         equals: true,
@@ -332,6 +341,7 @@ exports.ENERGY_MANAGER_SETTING_VALUE_KEYS = {
         'batteryDischargeBlockAboveHomeConsumptionW',
     ],
     [EnergyManagerSettingEnum.HeatpumpControl]: ['heatpumpControl'],
+    [EnergyManagerSettingEnum.HeatpumpEcoModeInExpensiveTimes]: ['heatpumpEcoModeInExpensiveTimes'],
     [EnergyManagerSettingEnum.HeatingRodControl]: ['heatingRodControl'],
     [EnergyManagerSettingEnum.HeatingRodMode]: ['heatingRodMode'],
     [EnergyManagerSettingEnum.HeatingRodBatteryDischargeSocLimitPercent]: [

package/dist/cjs/types/enyo-energy-manager-settings.d.cts

@@ -56,8 +56,13 @@ export declare enum EnergyManagerSettingEnum {
      * Unset or `null` means no such block.
      */
     BatteryDischargeBlockAboveHomeConsumptionW = "battery-discharge-block-above-home-consumption-w",
-    /** Whether the energy manager may steer the heat pump. */
+    /** Whether the energy manager may steer the heat pump. Gates {@link HeatpumpEcoModeInExpensiveTimes}. */
     HeatpumpControl = "heatpump-control",
+    /**
+     * Whether the heat pump is switched to its eco / reduced setpoint while
+     * electricity is expensive.
+     */
+    HeatpumpEcoModeInExpensiveTimes = "heatpump-eco-mode-in-expensive-times",
     /** Whether the energy manager may steer the heating rod. Gates {@link HeatingRodMode}. */
     HeatingRodControl = "heating-rod-control",
     /** What the heating rod is allowed to do — see {@link EnergyManagerHeatingRodModeEnum}. */
@@ -373,6 +378,43 @@ export interface EnergyManagerSettingValues {
      * allow control before the energy manager acts.
      */
     heatpumpControl?: boolean;
+    /**
+     * Whether the energy manager switches the heat pump to the user's **eco**
+     * setpoint while electricity is expensive. **Off by default** — absent or
+     * `false` means off.
+     *
+     * While on, the energy manager sends
+     * {@link EnyoDataBusHeatpumpProgramSwitchV3} with
+     * {@link EnyoHeatpumpProgramModeEnum.Eco} to every zone (heating circuit or
+     * DHW zone) that lists `eco` in its `supportedProgramModes`, for the hours
+     * the active consumption tariff makes expensive, and
+     * {@link EnyoHeatpumpProgramModeEnum.Program} once they are over. The
+     * temperatures are the user's own
+     * ({@link EnyoHeatpumpApplianceHeatingCircuit.programModeTemperaturesC}) —
+     * the energy manager chooses only *when* eco applies, never how low it is.
+     *
+     * Which hours count as expensive is the energy manager's call, taken from
+     * the tariff: the dearest slots of the day under a
+     * {@link EnyoTariffPricingTypeEnum.Dynamic} tariff, the high-price windows
+     * under a {@link EnyoTariffPricingTypeEnum.TimeVariable} one. Under a
+     * {@link EnyoTariffPricingTypeEnum.Static} tariff no hour is dearer than
+     * another, so the setting has no effect. While PV surplus covers the heat
+     * pump, the grid price does not apply and the energy manager may leave the
+     * zone on its program.
+     *
+     * Only heat pumps declaring
+     * {@link EnyoHeatpumpApplianceAvailableFeaturesEnum.ProgramSwitch} can
+     * follow it; on all others the setting has no effect.
+     *
+     * Each switch to eco because of this setting carries the reason
+     * {@link EnyoDataBusCommandReasonTypeEnum.ElectricityPriceAboveThreshold}
+     * (category {@link EnyoDataBusCommandReasonCategoryEnum.EnergyPrice}), with
+     * {@link EnyoDataBusCommandReason.electricityPricePerKwh} set to the price
+     * of the current slot.
+     *
+     * Only meaningful while {@link heatpumpControl} is `true`.
+     */
+    heatpumpEcoModeInExpensiveTimes?: boolean;
     /** Whether the energy manager may steer the heating rod. */
     heatingRodControl?: boolean;
     /** What the heating rod may do. Only meaningful while {@link heatingRodControl} is `true`. */
@@ -586,7 +628,7 @@ export interface EnergyManagerSettingDependency {
 /**
  * Which settings are gated by which, as data.
  *
- * Fifteen of the nineteen settings only mean anything while another one holds a specific
+ * Sixteen of the twenty settings only mean anything while another one holds a specific
  * value. Encoding that here rather than in prose gives the cockpit a single
  * source of truth for greying out dependent controls, and lets
  * `validateEnergyManagerSettingsState()` flag values that can never take effect.

package/dist/cjs/version.cjs

@@ -9,7 +9,7 @@ exports.getSdkVersion = getSdkVersion;
 /**
  * Current version of the enyo Energy App SDK.
  */
-exports.SDK_VERSION = '1.34.0';
+exports.SDK_VERSION = '1.35.0';
 /**
  * Gets the current SDK version.
  * @returns The semantic version string of the SDK

package/dist/cjs/version.d.cts

@@ -5,7 +5,7 @@
 /**
  * Current version of the enyo Energy App SDK.
  */
-export declare const SDK_VERSION = "1.34.0";
+export declare const SDK_VERSION = "1.35.0";
 /**
  * Gets the current SDK version.
  * @returns The semantic version string of the SDK

package/dist/implementations/energy-manager-settings/energy-manager-settings-validators.js

@@ -202,7 +202,8 @@ export function validateEnergyManagerSettingsState(state) {
     const values = state.values ?? {};
     // ── value formats ──────────────────────────────────────────────────────
     for (const key of ['batteryControl', 'batteryChargeFromGrid', 'heatpumpControl',
-        'heatingRodControl', 'chargerControl', 'gridOptimizedEvCharging']) {
+        'heatpumpEcoModeInExpensiveTimes', 'heatingRodControl', 'chargerControl',
+        'gridOptimizedEvCharging']) {
         if (values[key] !== undefined && typeof values[key] !== 'boolean') {
             errors.push(`\`${key}\` must be a boolean when set.`);
         }

package/dist/types/enyo-data-bus-value.d.ts

@@ -4583,6 +4583,11 @@ export interface EnyoDataBusHeatpumpControlStatusV3 extends EnyoDataBusMessage {
  * with a fresh `untilIso`. So if the energy manager or the app restarts, a
  * zone is back on its program after at most that long.
  *
+ * **Price-driven eco needs the owner's consent.** Switch a zone to eco because
+ * electricity is expensive only while the general setting
+ * {@link EnergyManagerSettingValues.heatpumpEcoModeInExpensiveTimes} (and
+ * {@link EnergyManagerSettingValues.heatpumpControl}) is `true`.
+ *
  * **Together with {@link EnyoDataBusHeatpumpControlV3}.** The two run side by
  * side. The mode sets the base and an action raises above it: eco at 20 °C
  * plus a room action of +1 K gives 21 °C.

package/dist/types/enyo-energy-manager-settings.d.ts

@@ -56,8 +56,13 @@ export declare enum EnergyManagerSettingEnum {
      * Unset or `null` means no such block.
      */
     BatteryDischargeBlockAboveHomeConsumptionW = "battery-discharge-block-above-home-consumption-w",
-    /** Whether the energy manager may steer the heat pump. */
+    /** Whether the energy manager may steer the heat pump. Gates {@link HeatpumpEcoModeInExpensiveTimes}. */
     HeatpumpControl = "heatpump-control",
+    /**
+     * Whether the heat pump is switched to its eco / reduced setpoint while
+     * electricity is expensive.
+     */
+    HeatpumpEcoModeInExpensiveTimes = "heatpump-eco-mode-in-expensive-times",
     /** Whether the energy manager may steer the heating rod. Gates {@link HeatingRodMode}. */
     HeatingRodControl = "heating-rod-control",
     /** What the heating rod is allowed to do — see {@link EnergyManagerHeatingRodModeEnum}. */
@@ -373,6 +378,43 @@ export interface EnergyManagerSettingValues {
      * allow control before the energy manager acts.
      */
     heatpumpControl?: boolean;
+    /**
+     * Whether the energy manager switches the heat pump to the user's **eco**
+     * setpoint while electricity is expensive. **Off by default** — absent or
+     * `false` means off.
+     *
+     * While on, the energy manager sends
+     * {@link EnyoDataBusHeatpumpProgramSwitchV3} with
+     * {@link EnyoHeatpumpProgramModeEnum.Eco} to every zone (heating circuit or
+     * DHW zone) that lists `eco` in its `supportedProgramModes`, for the hours
+     * the active consumption tariff makes expensive, and
+     * {@link EnyoHeatpumpProgramModeEnum.Program} once they are over. The
+     * temperatures are the user's own
+     * ({@link EnyoHeatpumpApplianceHeatingCircuit.programModeTemperaturesC}) —
+     * the energy manager chooses only *when* eco applies, never how low it is.
+     *
+     * Which hours count as expensive is the energy manager's call, taken from
+     * the tariff: the dearest slots of the day under a
+     * {@link EnyoTariffPricingTypeEnum.Dynamic} tariff, the high-price windows
+     * under a {@link EnyoTariffPricingTypeEnum.TimeVariable} one. Under a
+     * {@link EnyoTariffPricingTypeEnum.Static} tariff no hour is dearer than
+     * another, so the setting has no effect. While PV surplus covers the heat
+     * pump, the grid price does not apply and the energy manager may leave the
+     * zone on its program.
+     *
+     * Only heat pumps declaring
+     * {@link EnyoHeatpumpApplianceAvailableFeaturesEnum.ProgramSwitch} can
+     * follow it; on all others the setting has no effect.
+     *
+     * Each switch to eco because of this setting carries the reason
+     * {@link EnyoDataBusCommandReasonTypeEnum.ElectricityPriceAboveThreshold}
+     * (category {@link EnyoDataBusCommandReasonCategoryEnum.EnergyPrice}), with
+     * {@link EnyoDataBusCommandReason.electricityPricePerKwh} set to the price
+     * of the current slot.
+     *
+     * Only meaningful while {@link heatpumpControl} is `true`.
+     */
+    heatpumpEcoModeInExpensiveTimes?: boolean;
     /** Whether the energy manager may steer the heating rod. */
     heatingRodControl?: boolean;
     /** What the heating rod may do. Only meaningful while {@link heatingRodControl} is `true`. */
@@ -586,7 +628,7 @@ export interface EnergyManagerSettingDependency {
 /**
  * Which settings are gated by which, as data.
  *
- * Fifteen of the nineteen settings only mean anything while another one holds a specific
+ * Sixteen of the twenty settings only mean anything while another one holds a specific
  * value. Encoding that here rather than in prose gives the cockpit a single
  * source of truth for greying out dependent controls, and lets
  * `validateEnergyManagerSettingsState()` flag values that can never take effect.

package/dist/types/enyo-energy-manager-settings.js

@@ -58,8 +58,13 @@ export var EnergyManagerSettingEnum;
      */
     EnergyManagerSettingEnum["BatteryDischargeBlockAboveHomeConsumptionW"] = "battery-discharge-block-above-home-consumption-w";
     // ── Heat pump ──────────────────────────────────────────────────────────
-    /** Whether the energy manager may steer the heat pump. */
+    /** Whether the energy manager may steer the heat pump. Gates {@link HeatpumpEcoModeInExpensiveTimes}. */
     EnergyManagerSettingEnum["HeatpumpControl"] = "heatpump-control";
+    /**
+     * Whether the heat pump is switched to its eco / reduced setpoint while
+     * electricity is expensive.
+     */
+    EnergyManagerSettingEnum["HeatpumpEcoModeInExpensiveTimes"] = "heatpump-eco-mode-in-expensive-times";
     // ── Heating rod ────────────────────────────────────────────────────────
     /** Whether the energy manager may steer the heating rod. Gates {@link HeatingRodMode}. */
     EnergyManagerSettingEnum["HeatingRodControl"] = "heating-rod-control";
@@ -235,7 +240,7 @@ export var EnergyManagerHeatingRodModeEnum;
 /**
  * Which settings are gated by which, as data.
  *
- * Fifteen of the nineteen settings only mean anything while another one holds a specific
+ * Sixteen of the twenty settings only mean anything while another one holds a specific
  * value. Encoding that here rather than in prose gives the cockpit a single
  * source of truth for greying out dependent controls, and lets
  * `validateEnergyManagerSettingsState()` flag values that can never take effect.
@@ -277,6 +282,10 @@ export const ENERGY_MANAGER_SETTING_DEPENDENCIES = {
         requires: EnergyManagerSettingEnum.BatteryControl,
         equals: true,
     },
+    [EnergyManagerSettingEnum.HeatpumpEcoModeInExpensiveTimes]: {
+        requires: EnergyManagerSettingEnum.HeatpumpControl,
+        equals: true,
+    },
     [EnergyManagerSettingEnum.HeatingRodMode]: {
         requires: EnergyManagerSettingEnum.HeatingRodControl,
         equals: true,
@@ -329,6 +338,7 @@ export const ENERGY_MANAGER_SETTING_VALUE_KEYS = {
         'batteryDischargeBlockAboveHomeConsumptionW',
     ],
     [EnergyManagerSettingEnum.HeatpumpControl]: ['heatpumpControl'],
+    [EnergyManagerSettingEnum.HeatpumpEcoModeInExpensiveTimes]: ['heatpumpEcoModeInExpensiveTimes'],
     [EnergyManagerSettingEnum.HeatingRodControl]: ['heatingRodControl'],
     [EnergyManagerSettingEnum.HeatingRodMode]: ['heatingRodMode'],
     [EnergyManagerSettingEnum.HeatingRodBatteryDischargeSocLimitPercent]: [

package/dist/version.d.ts

@@ -5,7 +5,7 @@
 /**
  * Current version of the enyo Energy App SDK.
  */
-export declare const SDK_VERSION = "1.34.0";
+export declare const SDK_VERSION = "1.35.0";
 /**
  * Gets the current SDK version.
  * @returns The semantic version string of the SDK

package/dist/version.js

@@ -5,7 +5,7 @@
 /**
  * Current version of the enyo Energy App SDK.
  */
-export const SDK_VERSION = '1.34.0';
+export const SDK_VERSION = '1.35.0';
 /**
  * Gets the current SDK version.
  * @returns The semantic version string of the SDK

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@enyo-energy/energy-app-sdk",
-  "version": "1.34.0",
+  "version": "1.35.0",
   "description": "enyo Energy App SDK",
   "type": "module",
   "main": "dist/index.js",