@emiliosp/pi-maestro 0.17.0 → 0.18.1

package/node_modules/@js-temporal/polyfill/index.d.ts

@@ -1,1215 +0,0 @@
-export namespace Temporal {
-  export type ComparisonResult = -1 | 0 | 1;
-  export type RoundingMode =
-    | 'ceil'
-    | 'floor'
-    | 'expand'
-    | 'trunc'
-    | 'halfCeil'
-    | 'halfFloor'
-    | 'halfExpand'
-    | 'halfTrunc'
-    | 'halfEven';
-
-  /**
-   * Options for assigning fields using `with()` or entire objects with
-   * `from()`.
-   * */
-  export type AssignmentOptions = {
-    /**
-     * How to deal with out-of-range values
-     *
-     * - In `'constrain'` mode, out-of-range values are clamped to the nearest
-     *   in-range value.
-     * - In `'reject'` mode, out-of-range values will cause the function to
-     *   throw a RangeError.
-     *
-     * The default is `'constrain'`.
-     */
-    overflow?: 'constrain' | 'reject';
-  };
-
-  /**
-   * Options for assigning fields using `Duration.prototype.with()` or entire
-   * objects with `Duration.from()`, and for arithmetic with
-   * `Duration.prototype.add()` and `Duration.prototype.subtract()`.
-   * */
-  export type DurationOptions = {
-    /**
-     * How to deal with out-of-range values
-     *
-     * - In `'constrain'` mode, out-of-range values are clamped to the nearest
-     *   in-range value.
-     * - In `'balance'` mode, out-of-range values are resolved by balancing them
-     *   with the next highest unit.
-     *
-     * The default is `'constrain'`.
-     */
-    overflow?: 'constrain' | 'balance';
-  };
-
-  /**
-   * Options for conversions of `Temporal.PlainDateTime` to `Temporal.Instant`
-   * */
-  export type ToInstantOptions = {
-    /**
-     * Controls handling of invalid or ambiguous times caused by time zone
-     * offset changes like Daylight Saving time (DST) transitions.
-     *
-     * This option is only relevant if a `DateTime` value does not exist in the
-     * destination time zone (e.g. near "Spring Forward" DST transitions), or
-     * exists more than once (e.g. near "Fall Back" DST transitions).
-     *
-     * In case of ambiguous or nonexistent times, this option controls what
-     * exact time to return:
-     * - `'compatible'`: Equivalent to `'earlier'` for backward transitions like
-     *   the start of DST in the Spring, and `'later'` for forward transitions
-     *   like the end of DST in the Fall. This matches the behavior of legacy
-     *   `Date`, of libraries like moment.js, Luxon, or date-fns, and of
-     *   cross-platform standards like [RFC 5545
-     *   (iCalendar)](https://tools.ietf.org/html/rfc5545).
-     * - `'earlier'`: The earlier time of two possible times
-     * - `'later'`: The later of two possible times
-     * - `'reject'`: Throw a RangeError instead
-     *
-     * The default is `'compatible'`.
-     *
-     * */
-    disambiguation?: 'compatible' | 'earlier' | 'later' | 'reject';
-  };
-
-  type OffsetDisambiguationOptions = {
-    /**
-     * Time zone definitions can change. If an application stores data about
-     * events in the future, then stored data about future events may become
-     * ambiguous, for example if a country permanently abolishes DST. The
-     * `offset` option controls this unusual case.
-     *
-     * - `'use'` always uses the offset (if it's provided) to calculate the
-     *   instant. This ensures that the result will match the instant that was
-     *   originally stored, even if local clock time is different.
-     * - `'prefer'` uses the offset if it's valid for the date/time in this time
-     *   zone, but if it's not valid then the time zone will be used as a
-     *   fallback to calculate the instant.
-     * - `'ignore'` will disregard any provided offset. Instead, the time zone
-     *    and date/time value are used to calculate the instant. This will keep
-     *    local clock time unchanged but may result in a different real-world
-     *    instant.
-     * - `'reject'` acts like `'prefer'`, except it will throw a RangeError if
-     *   the offset is not valid for the given time zone identifier and
-     *   date/time value.
-     *
-     * If the ISO string ends in 'Z' then this option is ignored because there
-     * is no possibility of ambiguity.
-     *
-     * If a time zone offset is not present in the input, then this option is
-     * ignored because the time zone will always be used to calculate the
-     * offset.
-     *
-     * If the offset is not used, and if the date/time and time zone don't
-     * uniquely identify a single instant, then the `disambiguation` option will
-     * be used to choose the correct instant. However, if the offset is used
-     * then the `disambiguation` option will be ignored.
-     */
-    offset?: 'use' | 'prefer' | 'ignore' | 'reject';
-  };
-
-  export type ZonedDateTimeAssignmentOptions = Partial<
-    AssignmentOptions & ToInstantOptions & OffsetDisambiguationOptions
-  >;
-
-  /**
-   * Options for arithmetic operations like `add()` and `subtract()`
-   * */
-  export type ArithmeticOptions = {
-    /**
-     * Controls handling of out-of-range arithmetic results.
-     *
-     * If a result is out of range, then `'constrain'` will clamp the result to
-     * the allowed range, while `'reject'` will throw a RangeError.
-     *
-     * The default is `'constrain'`.
-     */
-    overflow?: 'constrain' | 'reject';
-  };
-
-  export type DateUnit = 'year' | 'month' | 'week' | 'day';
-  export type TimeUnit = 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond';
-  export type DateTimeUnit = DateUnit | TimeUnit;
-
-  /**
-   * When the name of a unit is provided to a Temporal API as a string, it is
-   * usually singular, e.g. 'day' or 'hour'. But plural unit names like 'days'
-   * or 'hours' are also accepted.
-   * */
-  export type PluralUnit<T extends DateTimeUnit> = {
-    year: 'years';
-    month: 'months';
-    week: 'weeks';
-    day: 'days';
-    hour: 'hours';
-    minute: 'minutes';
-    second: 'seconds';
-    millisecond: 'milliseconds';
-    microsecond: 'microseconds';
-    nanosecond: 'nanoseconds';
-  }[T];
-
-  export type LargestUnit<T extends DateTimeUnit> = 'auto' | T | PluralUnit<T>;
-  export type SmallestUnit<T extends DateTimeUnit> = T | PluralUnit<T>;
-  export type TotalUnit<T extends DateTimeUnit> = T | PluralUnit<T>;
-
-  /**
-   * Options for outputting precision in toString() on types with seconds
-   */
-  export type ToStringPrecisionOptions = {
-    fractionalSecondDigits?: 'auto' | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9;
-    smallestUnit?: SmallestUnit<'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>;
-
-    /**
-     * Controls how rounding is performed:
-     * - `halfExpand`: Round to the nearest of the values allowed by
-     *   `roundingIncrement` and `smallestUnit`. When there is a tie, round up.
-     *   This mode is the default.
-     * - `ceil`: Always round up, towards the end of time.
-     * - `trunc`: Always round down, towards the beginning of time.
-     * - `floor`: Also round down, towards the beginning of time. This mode acts
-     *   the same as `trunc`, but it's included for consistency with
-     *   `Temporal.Duration.round()` where negative values are allowed and
-     *   `trunc` rounds towards zero, unlike `floor` which rounds towards
-     *   negative infinity which is usually unexpected. For this reason, `trunc`
-     *   is recommended for most use cases.
-     */
-    roundingMode?: RoundingMode;
-  };
-
-  export type ShowCalendarOption = {
-    calendarName?: 'auto' | 'always' | 'never' | 'critical';
-  };
-
-  export type CalendarTypeToStringOptions = Partial<ToStringPrecisionOptions & ShowCalendarOption>;
-
-  export type ZonedDateTimeToStringOptions = Partial<
-    CalendarTypeToStringOptions & {
-      timeZoneName?: 'auto' | 'never' | 'critical';
-      offset?: 'auto' | 'never';
-    }
-  >;
-
-  export type InstantToStringOptions = Partial<
-    ToStringPrecisionOptions & {
-      timeZone: TimeZoneLike;
-    }
-  >;
-
-  /**
-   * Options to control the result of `until()` and `since()` methods in
-   * `Temporal` types.
-   */
-  export interface DifferenceOptions<T extends DateTimeUnit> {
-    /**
-     * The unit to round to. For example, to round to the nearest minute, use
-     * `smallestUnit: 'minute'`. This property is optional for `until()` and
-     * `since()`, because those methods default behavior is not to round.
-     * However, the same property is required for `round()`.
-     */
-    smallestUnit?: SmallestUnit<T>;
-
-    /**
-     * The largest unit to allow in the resulting `Temporal.Duration` object.
-     *
-     * Larger units will be "balanced" into smaller units. For example, if
-     * `largestUnit` is `'minute'` then a two-hour duration will be output as a
-     * 120-minute duration.
-     *
-     * Valid values may include `'year'`, `'month'`, `'week'`, `'day'`,
-     * `'hour'`, `'minute'`, `'second'`, `'millisecond'`, `'microsecond'`,
-     * `'nanosecond'` and `'auto'`, although some types may throw an exception
-     * if a value is used that would produce an invalid result. For example,
-     * `hours` is not accepted by `Temporal.PlainDate.prototype.since()`.
-     *
-     * The default is always `'auto'`, though the meaning of this depends on the
-     * type being used.
-     */
-    largestUnit?: LargestUnit<T>;
-
-    /**
-     * Allows rounding to an integer number of units. For example, to round to
-     * increments of a half hour, use `{ smallestUnit: 'minute',
-     * roundingIncrement: 30 }`.
-     */
-    roundingIncrement?: number;
-
-    /**
-     * Controls how rounding is performed:
-     * - `halfExpand`: Round to the nearest of the values allowed by
-     *   `roundingIncrement` and `smallestUnit`. When there is a tie, round away
-     *   from zero like `ceil` for positive durations and like `floor` for
-     *   negative durations.
-     * - `ceil`: Always round up, towards the end of time.
-     * - `trunc`: Always round down, towards the beginning of time. This mode is
-     *   the default.
-     * - `floor`: Also round down, towards the beginning of time. This mode acts
-     *   the same as `trunc`, but it's included for consistency with
-     *   `Temporal.Duration.round()` where negative values are allowed and
-     *   `trunc` rounds towards zero, unlike `floor` which rounds towards
-     *   negative infinity which is usually unexpected. For this reason, `trunc`
-     *   is recommended for most use cases.
-     */
-    roundingMode?: RoundingMode;
-  }
-
-  /**
-   * `round` methods take one required parameter. If a string is provided, the
-   * resulting `Temporal.Duration` object will be rounded to that unit. If an
-   * object is provided, its `smallestUnit` property is required while other
-   * properties are optional. A string is treated the same as an object whose
-   * `smallestUnit` property value is that string.
-   */
-  export type RoundTo<T extends DateTimeUnit> =
-    | SmallestUnit<T>
-    | {
-        /**
-         * The unit to round to. For example, to round to the nearest minute,
-         * use `smallestUnit: 'minute'`. This option is required. Note that the
-         * same-named property is optional when passed to `until` or `since`
-         * methods, because those methods do no rounding by default.
-         */
-        smallestUnit: SmallestUnit<T>;
-
-        /**
-         * Allows rounding to an integer number of units. For example, to round to
-         * increments of a half hour, use `{ smallestUnit: 'minute',
-         * roundingIncrement: 30 }`.
-         */
-        roundingIncrement?: number;
-
-        /**
-         * Controls how rounding is performed:
-         * - `halfExpand`: Round to the nearest of the values allowed by
-         *   `roundingIncrement` and `smallestUnit`. When there is a tie, round up.
-         *   This mode is the default.
-         * - `ceil`: Always round up, towards the end of time.
-         * - `trunc`: Always round down, towards the beginning of time.
-         * - `floor`: Also round down, towards the beginning of time. This mode acts
-         *   the same as `trunc`, but it's included for consistency with
-         *   `Temporal.Duration.round()` where negative values are allowed and
-         *   `trunc` rounds towards zero, unlike `floor` which rounds towards
-         *   negative infinity which is usually unexpected. For this reason, `trunc`
-         *   is recommended for most use cases.
-         */
-        roundingMode?: RoundingMode;
-      };
-
-  /**
-   * The `round` method of the `Temporal.Duration` accepts one required
-   * parameter. If a string is provided, the resulting `Temporal.Duration`
-   * object will be rounded to that unit. If an object is provided, the
-   * `smallestUnit` and/or `largestUnit` property is required, while other
-   * properties are optional. A string parameter is treated the same as an
-   * object whose `smallestUnit` property value is that string.
-   */
-  export type DurationRoundTo =
-    | SmallestUnit<DateTimeUnit>
-    | ((
-        | {
-            /**
-             * The unit to round to. For example, to round to the nearest
-             * minute, use `smallestUnit: 'minute'`. This property is normally
-             * required, but is optional if `largestUnit` is provided and not
-             * undefined.
-             */
-            smallestUnit: SmallestUnit<DateTimeUnit>;
-
-            /**
-             * The largest unit to allow in the resulting `Temporal.Duration`
-             * object.
-             *
-             * Larger units will be "balanced" into smaller units. For example,
-             * if `largestUnit` is `'minute'` then a two-hour duration will be
-             * output as a 120-minute duration.
-             *
-             * Valid values include `'year'`, `'month'`, `'week'`, `'day'`,
-             * `'hour'`, `'minute'`, `'second'`, `'millisecond'`,
-             * `'microsecond'`, `'nanosecond'` and `'auto'`.
-             *
-             * The default is `'auto'`, which means "the largest nonzero unit in
-             * the input duration". This default prevents expanding durations to
-             * larger units unless the caller opts into this behavior.
-             *
-             * If `smallestUnit` is larger, then `smallestUnit` will be used as
-             * `largestUnit`, superseding a caller-supplied or default value.
-             */
-            largestUnit?: LargestUnit<DateTimeUnit>;
-          }
-        | {
-            /**
-             * The unit to round to. For example, to round to the nearest
-             * minute, use `smallestUnit: 'minute'`. This property is normally
-             * required, but is optional if `largestUnit` is provided and not
-             * undefined.
-             */
-            smallestUnit?: SmallestUnit<DateTimeUnit>;
-
-            /**
-             * The largest unit to allow in the resulting `Temporal.Duration`
-             * object.
-             *
-             * Larger units will be "balanced" into smaller units. For example,
-             * if `largestUnit` is `'minute'` then a two-hour duration will be
-             * output as a 120-minute duration.
-             *
-             * Valid values include `'year'`, `'month'`, `'week'`, `'day'`,
-             * `'hour'`, `'minute'`, `'second'`, `'millisecond'`,
-             * `'microsecond'`, `'nanosecond'` and `'auto'`.
-             *
-             * The default is `'auto'`, which means "the largest nonzero unit in
-             * the input duration". This default prevents expanding durations to
-             * larger units unless the caller opts into this behavior.
-             *
-             * If `smallestUnit` is larger, then `smallestUnit` will be used as
-             * `largestUnit`, superseding a caller-supplied or default value.
-             */
-            largestUnit: LargestUnit<DateTimeUnit>;
-          }
-      ) & {
-        /**
-         * Allows rounding to an integer number of units. For example, to round
-         * to increments of a half hour, use `{ smallestUnit: 'minute',
-         * roundingIncrement: 30 }`.
-         */
-        roundingIncrement?: number;
-
-        /**
-         * Controls how rounding is performed:
-         * - `halfExpand`: Round to the nearest of the values allowed by
-         *   `roundingIncrement` and `smallestUnit`. When there is a tie, round
-         *   away from zero like `ceil` for positive durations and like `floor`
-         *   for negative durations. This mode is the default.
-         * - `ceil`: Always round towards positive infinity. For negative
-         *   durations this option will decrease the absolute value of the
-         *   duration which may be unexpected. To round away from zero, use
-         *   `ceil` for positive durations and `floor` for negative durations.
-         * - `trunc`: Always round down towards zero.
-         * - `floor`: Always round towards negative infinity. This mode acts the
-         *   same as `trunc` for positive durations but for negative durations
-         *   it will increase the absolute value of the result which may be
-         *   unexpected. For this reason, `trunc` is recommended for most "round
-         *   down" use cases.
-         */
-        roundingMode?: RoundingMode;
-
-        /**
-         * The starting point to use for rounding and conversions when
-         * variable-length units (years, months, weeks depending on the
-         * calendar) are involved. This option is required if any of the
-         * following are true:
-         * - `unit` is `'week'` or larger units
-         * - `this` has a nonzero value for `weeks` or larger units
-         *
-         * This value must be either a `Temporal.PlainDateTime`, a
-         * `Temporal.ZonedDateTime`, or a string or object value that can be
-         * passed to `from()` of those types. Examples:
-         * - `'2020-01-01T00:00-08:00[America/Los_Angeles]'`
-         * - `'2020-01-01'`
-         * - `Temporal.PlainDate.from('2020-01-01')`
-         *
-         * `Temporal.ZonedDateTime` will be tried first because it's more
-         * specific, with `Temporal.PlainDateTime` as a fallback.
-         *
-         * If the value resolves to a `Temporal.ZonedDateTime`, then operation
-         * will adjust for DST and other time zone transitions. Otherwise
-         * (including if this option is omitted), then the operation will ignore
-         * time zone transitions and all days will be assumed to be 24 hours
-         * long.
-         */
-        relativeTo?: Temporal.PlainDateTime | Temporal.ZonedDateTime | PlainDateTimeLike | ZonedDateTimeLike | string;
-      });
-
-  /**
-   * Options to control behavior of `Duration.prototype.total()`
-   */
-  export type DurationTotalOf =
-    | TotalUnit<DateTimeUnit>
-    | {
-        /**
-         * The unit to convert the duration to. This option is required.
-         */
-        unit: TotalUnit<DateTimeUnit>;
-
-        /**
-         * The starting point to use when variable-length units (years, months,
-         * weeks depending on the calendar) are involved. This option is required if
-         * any of the following are true:
-         * - `unit` is `'week'` or larger units
-         * - `this` has a nonzero value for `weeks` or larger units
-         *
-         * This value must be either a `Temporal.PlainDateTime`, a
-         * `Temporal.ZonedDateTime`, or a string or object value that can be passed
-         * to `from()` of those types. Examples:
-         * - `'2020-01-01T00:00-08:00[America/Los_Angeles]'`
-         * - `'2020-01-01'`
-         * - `Temporal.PlainDate.from('2020-01-01')`
-         *
-         * `Temporal.ZonedDateTime` will be tried first because it's more
-         * specific, with `Temporal.PlainDateTime` as a fallback.
-         *
-         * If the value resolves to a `Temporal.ZonedDateTime`, then operation will
-         * adjust for DST and other time zone transitions. Otherwise (including if
-         * this option is omitted), then the operation will ignore time zone
-         * transitions and all days will be assumed to be 24 hours long.
-         */
-        relativeTo?: Temporal.ZonedDateTime | Temporal.PlainDateTime | ZonedDateTimeLike | PlainDateTimeLike | string;
-      };
-
-  /**
-   * Options to control behavior of `Duration.compare()`
-   */
-  export interface DurationArithmeticOptions {
-    /**
-     * The starting point to use when variable-length units (years, months,
-     * weeks depending on the calendar) are involved. This option is required if
-     * either of the durations has a nonzero value for `weeks` or larger units.
-     *
-     * This value must be either a `Temporal.PlainDateTime`, a
-     * `Temporal.ZonedDateTime`, or a string or object value that can be passed
-     * to `from()` of those types. Examples:
-     * - `'2020-01-01T00:00-08:00[America/Los_Angeles]'`
-     * - `'2020-01-01'`
-     * - `Temporal.PlainDate.from('2020-01-01')`
-     *
-     * `Temporal.ZonedDateTime` will be tried first because it's more
-     * specific, with `Temporal.PlainDateTime` as a fallback.
-     *
-     * If the value resolves to a `Temporal.ZonedDateTime`, then operation will
-     * adjust for DST and other time zone transitions. Otherwise (including if
-     * this option is omitted), then the operation will ignore time zone
-     * transitions and all days will be assumed to be 24 hours long.
-     */
-    relativeTo?: Temporal.ZonedDateTime | Temporal.PlainDateTime | ZonedDateTimeLike | PlainDateTimeLike | string;
-  }
-
-  /**
-   * Options to control behaviour of `ZonedDateTime.prototype.getTimeZoneTransition()`
-   */
-  export type TransitionDirection = 'next' | 'previous' | { direction: 'next' | 'previous' };
-
-  // Handle Intl.LocalesArgument regardless of whether the TS version has it yet
-  type LocalesArgument = ConstructorParameters<typeof Intl.DateTimeFormat>[0];
-  // Provide a quick replacement for Intl.DurationFormatOptions if not in TS
-  type DurationFormatOptions = typeof Intl extends { DurationFormat: any }
-    ? ConstructorParameters<(typeof Intl)['DurationFormat']>[1]
-    : Record<string, unknown>;
-
-  export type DurationLike = {
-    years?: number;
-    months?: number;
-    weeks?: number;
-    days?: number;
-    hours?: number;
-    minutes?: number;
-    seconds?: number;
-    milliseconds?: number;
-    microseconds?: number;
-    nanoseconds?: number;
-  };
-
-  /**
-   *
-   * A `Temporal.Duration` represents an immutable duration of time which can be
-   * used in date/time arithmetic.
-   *
-   * See https://tc39.es/proposal-temporal/docs/duration.html for more details.
-   */
-  export class Duration {
-    static from(item: Temporal.Duration | DurationLike | string): Temporal.Duration;
-    static compare(
-      one: Temporal.Duration | DurationLike | string,
-      two: Temporal.Duration | DurationLike | string,
-      options?: DurationArithmeticOptions
-    ): ComparisonResult;
-    constructor(
-      years?: number,
-      months?: number,
-      weeks?: number,
-      days?: number,
-      hours?: number,
-      minutes?: number,
-      seconds?: number,
-      milliseconds?: number,
-      microseconds?: number,
-      nanoseconds?: number
-    );
-    readonly sign: -1 | 0 | 1;
-    readonly blank: boolean;
-    readonly years: number;
-    readonly months: number;
-    readonly weeks: number;
-    readonly days: number;
-    readonly hours: number;
-    readonly minutes: number;
-    readonly seconds: number;
-    readonly milliseconds: number;
-    readonly microseconds: number;
-    readonly nanoseconds: number;
-    negated(): Temporal.Duration;
-    abs(): Temporal.Duration;
-    with(durationLike: DurationLike): Temporal.Duration;
-    add(other: Temporal.Duration | DurationLike | string): Temporal.Duration;
-    subtract(other: Temporal.Duration | DurationLike | string): Temporal.Duration;
-    round(roundTo: DurationRoundTo): Temporal.Duration;
-    total(totalOf: DurationTotalOf): number;
-    toLocaleString(locales?: LocalesArgument, options?: DurationFormatOptions): string;
-    toJSON(): string;
-    toString(options?: ToStringPrecisionOptions): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.Duration';
-  }
-
-  /**
-   * A `Temporal.Instant` is an exact point in time, with a precision in
-   * nanoseconds. No time zone or calendar information is present. Therefore,
-   * `Temporal.Instant` has no concept of days, months, or even hours.
-   *
-   * For convenience of interoperability, it internally uses nanoseconds since
-   * the {@link https://en.wikipedia.org/wiki/Unix_time|Unix epoch} (midnight
-   * UTC on January 1, 1970). However, a `Temporal.Instant` can be created from
-   * any of several expressions that refer to a single point in time, including
-   * an {@link https://datatracker.ietf.org/doc/html/rfc9557|RFC 9557 string}
-   * with a time zone offset such as '2020-01-23T17:04:36.491865121-08:00'.
-   *
-   * See https://tc39.es/proposal-temporal/docs/instant.html for more details.
-   */
-  export class Instant {
-    static fromEpochMilliseconds(epochMilliseconds: number): Temporal.Instant;
-    static fromEpochNanoseconds(epochNanoseconds: bigint): Temporal.Instant;
-    static from(item: Temporal.Instant | string): Temporal.Instant;
-    static compare(one: Temporal.Instant | string, two: Temporal.Instant | string): ComparisonResult;
-    constructor(epochNanoseconds: bigint);
-    readonly epochMilliseconds: number;
-    readonly epochNanoseconds: bigint;
-    equals(other: Temporal.Instant | string): boolean;
-    add(
-      durationLike: Omit<Temporal.Duration | DurationLike, 'years' | 'months' | 'weeks' | 'days'> | string
-    ): Temporal.Instant;
-    subtract(
-      durationLike: Omit<Temporal.Duration | DurationLike, 'years' | 'months' | 'weeks' | 'days'> | string
-    ): Temporal.Instant;
-    until(
-      other: Temporal.Instant | string,
-      options?: DifferenceOptions<'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.Duration;
-    since(
-      other: Temporal.Instant | string,
-      options?: DifferenceOptions<'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.Duration;
-    round(
-      roundTo: RoundTo<'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.Instant;
-    toZonedDateTimeISO(tzLike: TimeZoneLike): Temporal.ZonedDateTime;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: InstantToStringOptions): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.Instant';
-  }
-
-  /**
-   * Any of these types can be passed to Temporal methods instead of a calendar ID.
-   * */
-  export type CalendarLike = string | ZonedDateTime | PlainDateTime | PlainDate | PlainYearMonth | PlainMonthDay;
-
-  export type PlainDateLike = {
-    era?: string | undefined;
-    eraYear?: number | undefined;
-    year?: number;
-    month?: number;
-    monthCode?: string;
-    day?: number;
-    calendar?: CalendarLike;
-  };
-
-  /**
-   * A `Temporal.PlainDate` represents a calendar date. "Calendar date" refers to the
-   * concept of a date as expressed in everyday usage, independent of any time
-   * zone. For example, it could be used to represent an event on a calendar
-   * which happens during the whole day no matter which time zone it's happening
-   * in.
-   *
-   * See https://tc39.es/proposal-temporal/docs/plaindate.html for more details.
-   */
-  export class PlainDate {
-    static from(item: Temporal.PlainDate | PlainDateLike | string, options?: AssignmentOptions): Temporal.PlainDate;
-    static compare(
-      one: Temporal.PlainDate | PlainDateLike | string,
-      two: Temporal.PlainDate | PlainDateLike | string
-    ): ComparisonResult;
-    constructor(isoYear: number, isoMonth: number, isoDay: number, calendar?: string);
-    readonly era: string | undefined;
-    readonly eraYear: number | undefined;
-    readonly year: number;
-    readonly month: number;
-    readonly monthCode: string;
-    readonly day: number;
-    readonly calendarId: string;
-    readonly dayOfWeek: number;
-    readonly dayOfYear: number;
-    readonly weekOfYear: number | undefined;
-    readonly yearOfWeek: number | undefined;
-    readonly daysInWeek: number;
-    readonly daysInYear: number;
-    readonly daysInMonth: number;
-    readonly monthsInYear: number;
-    readonly inLeapYear: boolean;
-    equals(other: Temporal.PlainDate | PlainDateLike | string): boolean;
-    with(dateLike: PlainDateLike, options?: AssignmentOptions): Temporal.PlainDate;
-    withCalendar(calendar: CalendarLike): Temporal.PlainDate;
-    add(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.PlainDate;
-    subtract(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.PlainDate;
-    until(
-      other: Temporal.PlainDate | PlainDateLike | string,
-      options?: DifferenceOptions<'year' | 'month' | 'week' | 'day'>
-    ): Temporal.Duration;
-    since(
-      other: Temporal.PlainDate | PlainDateLike | string,
-      options?: DifferenceOptions<'year' | 'month' | 'week' | 'day'>
-    ): Temporal.Duration;
-    toPlainDateTime(temporalTime?: Temporal.PlainTime | PlainTimeLike | string): Temporal.PlainDateTime;
-    toZonedDateTime(
-      timeZoneAndTime:
-        | string
-        | {
-            timeZone: TimeZoneLike;
-            plainTime?: Temporal.PlainTime | PlainTimeLike | string;
-          }
-    ): Temporal.ZonedDateTime;
-    toPlainYearMonth(): Temporal.PlainYearMonth;
-    toPlainMonthDay(): Temporal.PlainMonthDay;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: ShowCalendarOption): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.PlainDate';
-  }
-
-  export type PlainDateTimeLike = {
-    era?: string | undefined;
-    eraYear?: number | undefined;
-    year?: number;
-    month?: number;
-    monthCode?: string;
-    day?: number;
-    hour?: number;
-    minute?: number;
-    second?: number;
-    millisecond?: number;
-    microsecond?: number;
-    nanosecond?: number;
-    calendar?: CalendarLike;
-  };
-
-  /**
-   * A `Temporal.PlainDateTime` represents a calendar date and wall-clock time, with
-   * a precision in nanoseconds, and without any time zone. Of the Temporal
-   * classes carrying human-readable time information, it is the most general
-   * and complete one. `Temporal.PlainDate`, `Temporal.PlainTime`, `Temporal.PlainYearMonth`,
-   * and `Temporal.PlainMonthDay` all carry less information and should be used when
-   * complete information is not required.
-   *
-   * See https://tc39.es/proposal-temporal/docs/plaindatetime.html for more details.
-   */
-  export class PlainDateTime {
-    static from(
-      item: Temporal.PlainDateTime | PlainDateTimeLike | string,
-      options?: AssignmentOptions
-    ): Temporal.PlainDateTime;
-    static compare(
-      one: Temporal.PlainDateTime | PlainDateTimeLike | string,
-      two: Temporal.PlainDateTime | PlainDateTimeLike | string
-    ): ComparisonResult;
-    constructor(
-      isoYear: number,
-      isoMonth: number,
-      isoDay: number,
-      hour?: number,
-      minute?: number,
-      second?: number,
-      millisecond?: number,
-      microsecond?: number,
-      nanosecond?: number,
-      calendar?: string
-    );
-    readonly era: string | undefined;
-    readonly eraYear: number | undefined;
-    readonly year: number;
-    readonly month: number;
-    readonly monthCode: string;
-    readonly day: number;
-    readonly hour: number;
-    readonly minute: number;
-    readonly second: number;
-    readonly millisecond: number;
-    readonly microsecond: number;
-    readonly nanosecond: number;
-    readonly calendarId: string;
-    readonly dayOfWeek: number;
-    readonly dayOfYear: number;
-    readonly weekOfYear: number | undefined;
-    readonly yearOfWeek: number | undefined;
-    readonly daysInWeek: number;
-    readonly daysInYear: number;
-    readonly daysInMonth: number;
-    readonly monthsInYear: number;
-    readonly inLeapYear: boolean;
-    equals(other: Temporal.PlainDateTime | PlainDateTimeLike | string): boolean;
-    with(dateTimeLike: PlainDateTimeLike, options?: AssignmentOptions): Temporal.PlainDateTime;
-    withPlainTime(timeLike?: Temporal.PlainTime | PlainTimeLike | string): Temporal.PlainDateTime;
-    withCalendar(calendar: CalendarLike): Temporal.PlainDateTime;
-    add(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.PlainDateTime;
-    subtract(
-      durationLike: Temporal.Duration | DurationLike | string,
-      options?: ArithmeticOptions
-    ): Temporal.PlainDateTime;
-    until(
-      other: Temporal.PlainDateTime | PlainDateTimeLike | string,
-      options?: DifferenceOptions<
-        'year' | 'month' | 'week' | 'day' | 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'
-      >
-    ): Temporal.Duration;
-    since(
-      other: Temporal.PlainDateTime | PlainDateTimeLike | string,
-      options?: DifferenceOptions<
-        'year' | 'month' | 'week' | 'day' | 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'
-      >
-    ): Temporal.Duration;
-    round(
-      roundTo: RoundTo<'day' | 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.PlainDateTime;
-    toZonedDateTime(tzLike: TimeZoneLike, options?: ToInstantOptions): Temporal.ZonedDateTime;
-    toPlainDate(): Temporal.PlainDate;
-    toPlainTime(): Temporal.PlainTime;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: CalendarTypeToStringOptions): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.PlainDateTime';
-  }
-
-  export type PlainMonthDayLike = {
-    era?: string | undefined;
-    eraYear?: number | undefined;
-    year?: number;
-    month?: number;
-    monthCode?: string;
-    day?: number;
-    calendar?: CalendarLike;
-  };
-
-  /**
-   * A `Temporal.PlainMonthDay` represents a particular day on the calendar, but
-   * without a year. For example, it could be used to represent a yearly
-   * recurring event, like "Bastille Day is on the 14th of July."
-   *
-   * See https://tc39.es/proposal-temporal/docs/plainmonthday.html for more details.
-   */
-  export class PlainMonthDay {
-    static from(
-      item: Temporal.PlainMonthDay | PlainMonthDayLike | string,
-      options?: AssignmentOptions
-    ): Temporal.PlainMonthDay;
-    constructor(isoMonth: number, isoDay: number, calendar?: string, referenceISOYear?: number);
-    readonly monthCode: string;
-    readonly day: number;
-    readonly calendarId: string;
-    equals(other: Temporal.PlainMonthDay | PlainMonthDayLike | string): boolean;
-    with(monthDayLike: PlainMonthDayLike, options?: AssignmentOptions): Temporal.PlainMonthDay;
-    toPlainDate(year: { year: number }): Temporal.PlainDate;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: ShowCalendarOption): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.PlainMonthDay';
-  }
-
-  export type PlainTimeLike = {
-    hour?: number;
-    minute?: number;
-    second?: number;
-    millisecond?: number;
-    microsecond?: number;
-    nanosecond?: number;
-  };
-
-  /**
-   * A `Temporal.PlainTime` represents a wall-clock time, with a precision in
-   * nanoseconds, and without any time zone. "Wall-clock time" refers to the
-   * concept of a time as expressed in everyday usage — the time that you read
-   * off the clock on the wall. For example, it could be used to represent an
-   * event that happens daily at a certain time, no matter what time zone.
-   *
-   * `Temporal.PlainTime` refers to a time with no associated calendar date; if you
-   * need to refer to a specific time on a specific day, use
-   * `Temporal.PlainDateTime`. A `Temporal.PlainTime` can be converted into a
-   * `Temporal.PlainDateTime` by combining it with a `Temporal.PlainDate` using the
-   * `toPlainDateTime()` method.
-   *
-   * See https://tc39.es/proposal-temporal/docs/plaintime.html for more details.
-   */
-  export class PlainTime {
-    static from(item: Temporal.PlainTime | PlainTimeLike | string, options?: AssignmentOptions): Temporal.PlainTime;
-    static compare(
-      one: Temporal.PlainTime | PlainTimeLike | string,
-      two: Temporal.PlainTime | PlainTimeLike | string
-    ): ComparisonResult;
-    constructor(
-      hour?: number,
-      minute?: number,
-      second?: number,
-      millisecond?: number,
-      microsecond?: number,
-      nanosecond?: number
-    );
-    readonly hour: number;
-    readonly minute: number;
-    readonly second: number;
-    readonly millisecond: number;
-    readonly microsecond: number;
-    readonly nanosecond: number;
-    equals(other: Temporal.PlainTime | PlainTimeLike | string): boolean;
-    with(timeLike: Temporal.PlainTime | PlainTimeLike, options?: AssignmentOptions): Temporal.PlainTime;
-    add(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.PlainTime;
-    subtract(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.PlainTime;
-    until(
-      other: Temporal.PlainTime | PlainTimeLike | string,
-      options?: DifferenceOptions<'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.Duration;
-    since(
-      other: Temporal.PlainTime | PlainTimeLike | string,
-      options?: DifferenceOptions<'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.Duration;
-    round(
-      roundTo: RoundTo<'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.PlainTime;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: ToStringPrecisionOptions): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.PlainTime';
-  }
-
-  /**
-   * To provide a time zone to any non-constructor Temporal method, any of the
-   * following are allowed:
-   * - An IANA time zone ID string like "Europe/Paris"
-   * - An RFC 9557 string that includes a time zone annotation like
-   *   "2025-03-13T05:40:57.499+01:00[Europe/Paris]"
-   * - A `Temporal.ZonedDateTime` object
-   */
-  export type TimeZoneLike = string | ZonedDateTime;
-
-  export type PlainYearMonthLike = {
-    era?: string | undefined;
-    eraYear?: number | undefined;
-    year?: number;
-    month?: number;
-    monthCode?: string;
-    calendar?: CalendarLike;
-  };
-
-  /**
-   * A `Temporal.PlainYearMonth` represents a particular month on the calendar. For
-   * example, it could be used to represent a particular instance of a monthly
-   * recurring event, like "the June 2019 meeting".
-   *
-   * See https://tc39.es/proposal-temporal/docs/plainyearmonth.html for more details.
-   */
-  export class PlainYearMonth {
-    static from(
-      item: Temporal.PlainYearMonth | PlainYearMonthLike | string,
-      options?: AssignmentOptions
-    ): Temporal.PlainYearMonth;
-    static compare(
-      one: Temporal.PlainYearMonth | PlainYearMonthLike | string,
-      two: Temporal.PlainYearMonth | PlainYearMonthLike | string
-    ): ComparisonResult;
-    constructor(isoYear: number, isoMonth: number, calendar?: string, referenceISODay?: number);
-    readonly era: string | undefined;
-    readonly eraYear: number | undefined;
-    readonly year: number;
-    readonly month: number;
-    readonly monthCode: string;
-    readonly calendarId: string;
-    readonly daysInMonth: number;
-    readonly daysInYear: number;
-    readonly monthsInYear: number;
-    readonly inLeapYear: boolean;
-    equals(other: Temporal.PlainYearMonth | PlainYearMonthLike | string): boolean;
-    with(yearMonthLike: PlainYearMonthLike, options?: AssignmentOptions): Temporal.PlainYearMonth;
-    add(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.PlainYearMonth;
-    subtract(
-      durationLike: Temporal.Duration | DurationLike | string,
-      options?: ArithmeticOptions
-    ): Temporal.PlainYearMonth;
-    until(
-      other: Temporal.PlainYearMonth | PlainYearMonthLike | string,
-      options?: DifferenceOptions<'year' | 'month'>
-    ): Temporal.Duration;
-    since(
-      other: Temporal.PlainYearMonth | PlainYearMonthLike | string,
-      options?: DifferenceOptions<'year' | 'month'>
-    ): Temporal.Duration;
-    toPlainDate(day: { day: number }): Temporal.PlainDate;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: ShowCalendarOption): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.PlainYearMonth';
-  }
-
-  export type ZonedDateTimeLike = {
-    era?: string | undefined;
-    eraYear?: number | undefined;
-    year?: number;
-    month?: number;
-    monthCode?: string;
-    day?: number;
-    hour?: number;
-    minute?: number;
-    second?: number;
-    millisecond?: number;
-    microsecond?: number;
-    nanosecond?: number;
-    offset?: string;
-    timeZone?: TimeZoneLike;
-    calendar?: CalendarLike;
-  };
-
-  export class ZonedDateTime {
-    static from(
-      item: Temporal.ZonedDateTime | ZonedDateTimeLike | string,
-      options?: ZonedDateTimeAssignmentOptions
-    ): ZonedDateTime;
-    static compare(
-      one: Temporal.ZonedDateTime | ZonedDateTimeLike | string,
-      two: Temporal.ZonedDateTime | ZonedDateTimeLike | string
-    ): ComparisonResult;
-    constructor(epochNanoseconds: bigint, timeZone: string, calendar?: string);
-    readonly era: string | undefined;
-    readonly eraYear: number | undefined;
-    readonly year: number;
-    readonly month: number;
-    readonly monthCode: string;
-    readonly day: number;
-    readonly hour: number;
-    readonly minute: number;
-    readonly second: number;
-    readonly millisecond: number;
-    readonly microsecond: number;
-    readonly nanosecond: number;
-    readonly timeZoneId: string;
-    readonly calendarId: string;
-    readonly dayOfWeek: number;
-    readonly dayOfYear: number;
-    readonly weekOfYear: number | undefined;
-    readonly yearOfWeek: number | undefined;
-    readonly hoursInDay: number;
-    readonly daysInWeek: number;
-    readonly daysInMonth: number;
-    readonly daysInYear: number;
-    readonly monthsInYear: number;
-    readonly inLeapYear: boolean;
-    readonly offsetNanoseconds: number;
-    readonly offset: string;
-    readonly epochMilliseconds: number;
-    readonly epochNanoseconds: bigint;
-    equals(other: Temporal.ZonedDateTime | ZonedDateTimeLike | string): boolean;
-    with(zonedDateTimeLike: ZonedDateTimeLike, options?: ZonedDateTimeAssignmentOptions): Temporal.ZonedDateTime;
-    withPlainTime(timeLike?: Temporal.PlainTime | PlainTimeLike | string): Temporal.ZonedDateTime;
-    withCalendar(calendar: CalendarLike): Temporal.ZonedDateTime;
-    withTimeZone(timeZone: TimeZoneLike): Temporal.ZonedDateTime;
-    add(durationLike: Temporal.Duration | DurationLike | string, options?: ArithmeticOptions): Temporal.ZonedDateTime;
-    subtract(
-      durationLike: Temporal.Duration | DurationLike | string,
-      options?: ArithmeticOptions
-    ): Temporal.ZonedDateTime;
-    until(
-      other: Temporal.ZonedDateTime | ZonedDateTimeLike | string,
-      options?: Temporal.DifferenceOptions<
-        'year' | 'month' | 'week' | 'day' | 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'
-      >
-    ): Temporal.Duration;
-    since(
-      other: Temporal.ZonedDateTime | ZonedDateTimeLike | string,
-      options?: Temporal.DifferenceOptions<
-        'year' | 'month' | 'week' | 'day' | 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'
-      >
-    ): Temporal.Duration;
-    round(
-      roundTo: RoundTo<'day' | 'hour' | 'minute' | 'second' | 'millisecond' | 'microsecond' | 'nanosecond'>
-    ): Temporal.ZonedDateTime;
-    startOfDay(): Temporal.ZonedDateTime;
-    getTimeZoneTransition(direction: TransitionDirection): Temporal.ZonedDateTime | null;
-    toInstant(): Temporal.Instant;
-    toPlainDateTime(): Temporal.PlainDateTime;
-    toPlainDate(): Temporal.PlainDate;
-    toPlainTime(): Temporal.PlainTime;
-    toLocaleString(locales?: LocalesArgument, options?: globalThis.Intl.DateTimeFormatOptions): string;
-    toJSON(): string;
-    toString(options?: ZonedDateTimeToStringOptions): string;
-    valueOf(): never;
-    readonly [Symbol.toStringTag]: 'Temporal.ZonedDateTime';
-  }
-
-  /**
-   * The `Temporal.Now` object has several methods which give information about
-   * the current date, time, and time zone.
-   *
-   * See https://tc39.es/proposal-temporal/docs/now.html for more details.
-   */
-  export const Now: {
-    /**
-     * Get the exact system date and time as a `Temporal.Instant`.
-     *
-     * This method gets the current exact system time, without regard to
-     * calendar or time zone. This is a good way to get a timestamp for an
-     * event, for example. It works like the old-style JavaScript `Date.now()`,
-     * but with nanosecond precision instead of milliseconds.
-     *
-     * Note that a `Temporal.Instant` doesn't know about time zones. For the
-     * exact time in a specific time zone, use `Temporal.Now.zonedDateTimeISO`
-     * or `Temporal.Now.zonedDateTime`.
-     * */
-    instant: () => Temporal.Instant;
-
-    /**
-     * Get the current calendar date and clock time in a specific time zone,
-     * using the ISO 8601 calendar.
-     *
-     * @param {TimeZoneLike} [tzLike] -
-     * {@link https://en.wikipedia.org/wiki/List_of_tz_database_time_zones|IANA time zone identifier}
-     * string (e.g. `'Europe/London'`). If omitted, the environment's
-     * current time zone will be used.
-     */
-    zonedDateTimeISO: (tzLike?: TimeZoneLike) => Temporal.ZonedDateTime;
-
-    /**
-     * Get the current date and clock time in a specific time zone, using the
-     * ISO 8601 calendar.
-     *
-     * Note that the `Temporal.PlainDateTime` type does not persist the time zone,
-     * but retaining the time zone is required for most time-zone-related use
-     * cases. Therefore, it's usually recommended to use
-     * `Temporal.Now.zonedDateTimeISO` instead of this function.
-     *
-     * @param {TimeZoneLike} [tzLike] -
-     * {@link https://en.wikipedia.org/wiki/List_of_tz_database_time_zones|IANA time zone identifier}
-     * string (e.g. `'Europe/London'`). If omitted, the environment's
-     * current time zone will be used.
-     */
-    plainDateTimeISO: (tzLike?: TimeZoneLike) => Temporal.PlainDateTime;
-
-    /**
-     * Get the current date in a specific time zone, using the ISO 8601
-     * calendar.
-     *
-     * @param {TimeZoneLike} [tzLike] -
-     * {@link https://en.wikipedia.org/wiki/List_of_tz_database_time_zones|IANA time zone identifier}
-     * string (e.g. `'Europe/London'`). If omitted, the environment's
-     * current time zone will be used.
-     */
-    plainDateISO: (tzLike?: TimeZoneLike) => Temporal.PlainDate;
-
-    /**
-     * Get the current clock time in a specific time zone, using the ISO 8601 calendar.
-     *
-     * @param {TimeZoneLike} [tzLike] -
-     * {@link https://en.wikipedia.org/wiki/List_of_tz_database_time_zones|IANA time zone identifier}
-     * string (e.g. `'Europe/London'`). If omitted, the environment's
-     * current time zone will be used.
-     */
-    plainTimeISO: (tzLike?: TimeZoneLike) => Temporal.PlainTime;
-
-    /**
-     * Get the identifier of the environment's current time zone.
-     *
-     * This method gets the identifier of the current system time zone. This
-     * will usually be a named
-     * {@link https://en.wikipedia.org/wiki/List_of_tz_database_time_zones|IANA time zone}.
-     */
-    timeZoneId: () => string;
-
-    readonly [Symbol.toStringTag]: 'Temporal.Now';
-  };
-}
-
-declare namespace Intl {
-  type Formattable =
-    | Date
-    | Temporal.Instant
-    | Temporal.ZonedDateTime
-    | Temporal.PlainDate
-    | Temporal.PlainTime
-    | Temporal.PlainDateTime
-    | Temporal.PlainYearMonth
-    | Temporal.PlainMonthDay;
-
-  export interface DateTimeFormat extends globalThis.Intl.DateTimeFormat {
-    /**
-     * Format a date into a string according to the locale and formatting
-     * options of this `Intl.DateTimeFormat` object.
-     *
-     * @param date The date to format.
-     */
-    format(date?: Formattable | number): string;
-
-    /**
-     * Allow locale-aware formatting of strings produced by
-     * `Intl.DateTimeFormat` formatters.
-     *
-     * @param date The date to format.
-     */
-    formatToParts(date?: Formattable | number): globalThis.Intl.DateTimeFormatPart[];
-
-    /**
-     * Format a date range in the most concise way based on the locale and
-     * options provided when instantiating this `Intl.DateTimeFormat` object.
-     *
-     * @param startDate The start date of the range to format.
-     * @param endDate The start date of the range to format. Must be the same
-     * type as `startRange`.
-     */
-    formatRange<T extends Formattable>(startDate: T, endDate: T): string;
-    formatRange(startDate: Date | number, endDate: Date | number): string;
-
-    /**
-     * Allow locale-aware formatting of tokens representing each part of the
-     * formatted date range produced by `Intl.DateTimeFormat` formatters.
-     *
-     * @param startDate The start date of the range to format.
-     * @param endDate The start date of the range to format. Must be the same
-     * type as `startRange`.
-     */
-    formatRangeToParts<T extends Formattable>(startDate: T, endDate: T): globalThis.Intl.DateTimeRangeFormatPart[];
-    formatRangeToParts(startDate: Date | number, endDate: Date | number): globalThis.Intl.DateTimeRangeFormatPart[];
-  }
-
-  export const DateTimeFormat: {
-    /**
-     * Creates `Intl.DateTimeFormat` objects that enable language-sensitive
-     * date and time formatting.
-     */
-    new (locales?: string | string[], options?: globalThis.Intl.DateTimeFormatOptions): DateTimeFormat;
-    (locales?: string | string[], options?: globalThis.Intl.DateTimeFormatOptions): DateTimeFormat;
-
-    /**
-     * Get an array containing those of the provided locales that are supported
-     * in date and time formatting without having to fall back to the runtime's
-     * default locale.
-     */
-    supportedLocalesOf(locales: string | string[], options?: globalThis.Intl.DateTimeFormatOptions): string[];
-  };
-}
-
-export { Intl as Intl };
-
-export function toTemporalInstant(this: Date): Temporal.Instant;