@elizaos/autonomous 2.0.0-alpha.21 → 2.0.0-alpha.23

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Burnable.sol

@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Burnable.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "../../../utils/Context.sol";
+
+/**
+ * @title ERC721 Burnable Token
+ * @dev ERC721 Token that can be burned (destroyed).
+ */
+abstract contract ERC721Burnable is Context, ERC721 {
+    /**
+     * @dev Burns `tokenId`. See {ERC721-_burn}.
+     *
+     * Requirements:
+     *
+     * - The caller must own `tokenId` or be an approved operator.
+     */
+    function burn(uint256 tokenId) public virtual {
+        //solhint-disable-next-line max-line-length
+        require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721: caller is not token owner or approved");
+        _burn(tokenId);
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Consecutive.sol

@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/extensions/ERC721Consecutive.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "../../../interfaces/IERC2309.sol";
+import "../../../utils/Checkpoints.sol";
+import "../../../utils/structs/BitMaps.sol";
+
+/**
+ * @dev Implementation of the ERC2309 "Consecutive Transfer Extension" as defined in
+ * https://eips.ethereum.org/EIPS/eip-2309[EIP-2309].
+ *
+ * This extension allows the minting of large batches of tokens, during contract construction only. For upgradeable
+ * contracts this implies that batch minting is only available during proxy deployment, and not in subsequent upgrades.
+ * These batches are limited to 5000 tokens at a time by default to accommodate off-chain indexers.
+ *
+ * Using this extension removes the ability to mint single tokens during contract construction. This ability is
+ * regained after construction. During construction, only batch minting is allowed.
+ *
+ * IMPORTANT: This extension bypasses the hooks {_beforeTokenTransfer} and {_afterTokenTransfer} for tokens minted in
+ * batch. When using this extension, you should consider the {_beforeConsecutiveTokenTransfer} and
+ * {_afterConsecutiveTokenTransfer} hooks in addition to {_beforeTokenTransfer} and {_afterTokenTransfer}.
+ *
+ * IMPORTANT: When overriding {_afterTokenTransfer}, be careful about call ordering. {ownerOf} may return invalid
+ * values during the {_afterTokenTransfer} execution if the super call is not called first. To be safe, execute the
+ * super call before your custom logic.
+ *
+ * _Available since v4.8._
+ */
+abstract contract ERC721Consecutive is IERC2309, ERC721 {
+    using BitMaps for BitMaps.BitMap;
+    using Checkpoints for Checkpoints.Trace160;
+
+    Checkpoints.Trace160 private _sequentialOwnership;
+    BitMaps.BitMap private _sequentialBurn;
+
+    /**
+     * @dev Maximum size of a batch of consecutive tokens. This is designed to limit stress on off-chain indexing
+     * services that have to record one entry per token, and have protections against "unreasonably large" batches of
+     * tokens.
+     *
+     * NOTE: Overriding the default value of 5000 will not cause on-chain issues, but may result in the asset not being
+     * correctly supported by off-chain indexing services (including marketplaces).
+     */
+    function _maxBatchSize() internal view virtual returns (uint96) {
+        return 5000;
+    }
+
+    /**
+     * @dev See {ERC721-_ownerOf}. Override that checks the sequential ownership structure for tokens that have
+     * been minted as part of a batch, and not yet transferred.
+     */
+    function _ownerOf(uint256 tokenId) internal view virtual override returns (address) {
+        address owner = super._ownerOf(tokenId);
+
+        // If token is owned by the core, or beyond consecutive range, return base value
+        if (owner != address(0) || tokenId > type(uint96).max) {
+            return owner;
+        }
+
+        // Otherwise, check the token was not burned, and fetch ownership from the anchors
+        // Note: no need for safe cast, we know that tokenId <= type(uint96).max
+        return _sequentialBurn.get(tokenId) ? address(0) : address(_sequentialOwnership.lowerLookup(uint96(tokenId)));
+    }
+
+    /**
+     * @dev Mint a batch of tokens of length `batchSize` for `to`. Returns the token id of the first token minted in the
+     * batch; if `batchSize` is 0, returns the number of consecutive ids minted so far.
+     *
+     * Requirements:
+     *
+     * - `batchSize` must not be greater than {_maxBatchSize}.
+     * - The function is called in the constructor of the contract (directly or indirectly).
+     *
+     * CAUTION: Does not emit a `Transfer` event. This is ERC721 compliant as long as it is done inside of the
+     * constructor, which is enforced by this function.
+     *
+     * CAUTION: Does not invoke `onERC721Received` on the receiver.
+     *
+     * Emits a {IERC2309-ConsecutiveTransfer} event.
+     */
+    function _mintConsecutive(address to, uint96 batchSize) internal virtual returns (uint96) {
+        uint96 first = _totalConsecutiveSupply();
+
+        // minting a batch of size 0 is a no-op
+        if (batchSize > 0) {
+            require(!Address.isContract(address(this)), "ERC721Consecutive: batch minting restricted to constructor");
+            require(to != address(0), "ERC721Consecutive: mint to the zero address");
+            require(batchSize <= _maxBatchSize(), "ERC721Consecutive: batch too large");
+
+            // hook before
+            _beforeTokenTransfer(address(0), to, first, batchSize);
+
+            // push an ownership checkpoint & emit event
+            uint96 last = first + batchSize - 1;
+            _sequentialOwnership.push(last, uint160(to));
+
+            // The invariant required by this function is preserved because the new sequentialOwnership checkpoint
+            // is attributing ownership of `batchSize` new tokens to account `to`.
+            __unsafe_increaseBalance(to, batchSize);
+
+            emit ConsecutiveTransfer(first, last, address(0), to);
+
+            // hook after
+            _afterTokenTransfer(address(0), to, first, batchSize);
+        }
+
+        return first;
+    }
+
+    /**
+     * @dev See {ERC721-_mint}. Override version that restricts normal minting to after construction.
+     *
+     * Warning: Using {ERC721Consecutive} prevents using {_mint} during construction in favor of {_mintConsecutive}.
+     * After construction, {_mintConsecutive} is no longer available and {_mint} becomes available.
+     */
+    function _mint(address to, uint256 tokenId) internal virtual override {
+        require(Address.isContract(address(this)), "ERC721Consecutive: can't mint during construction");
+        super._mint(to, tokenId);
+    }
+
+    /**
+     * @dev See {ERC721-_afterTokenTransfer}. Burning of tokens that have been sequentially minted must be explicit.
+     */
+    function _afterTokenTransfer(
+        address from,
+        address to,
+        uint256 firstTokenId,
+        uint256 batchSize
+    ) internal virtual override {
+        if (
+            to == address(0) && // if we burn
+            firstTokenId < _totalConsecutiveSupply() && // and the tokenId was minted in a batch
+            !_sequentialBurn.get(firstTokenId) // and the token was never marked as burnt
+        ) {
+            require(batchSize == 1, "ERC721Consecutive: batch burn not supported");
+            _sequentialBurn.set(firstTokenId);
+        }
+        super._afterTokenTransfer(from, to, firstTokenId, batchSize);
+    }
+
+    function _totalConsecutiveSupply() private view returns (uint96) {
+        (bool exists, uint96 latestId, ) = _sequentialOwnership.latestCheckpoint();
+        return exists ? latestId + 1 : 0;
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Enumerable.sol

@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Enumerable.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "./IERC721Enumerable.sol";
+
+/**
+ * @dev This implements an optional extension of {ERC721} defined in the EIP that adds
+ * enumerability of all the token ids in the contract as well as all token ids owned by each
+ * account.
+ */
+abstract contract ERC721Enumerable is ERC721, IERC721Enumerable {
+    // Mapping from owner to list of owned token IDs
+    mapping(address => mapping(uint256 => uint256)) private _ownedTokens;
+
+    // Mapping from token ID to index of the owner tokens list
+    mapping(uint256 => uint256) private _ownedTokensIndex;
+
+    // Array with all token ids, used for enumeration
+    uint256[] private _allTokens;
+
+    // Mapping from token id to position in the allTokens array
+    mapping(uint256 => uint256) private _allTokensIndex;
+
+    /**
+     * @dev See {IERC165-supportsInterface}.
+     */
+    function supportsInterface(bytes4 interfaceId) public view virtual override(IERC165, ERC721) returns (bool) {
+        return interfaceId == type(IERC721Enumerable).interfaceId || super.supportsInterface(interfaceId);
+    }
+
+    /**
+     * @dev See {IERC721Enumerable-tokenOfOwnerByIndex}.
+     */
+    function tokenOfOwnerByIndex(address owner, uint256 index) public view virtual override returns (uint256) {
+        require(index < ERC721.balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
+        return _ownedTokens[owner][index];
+    }
+
+    /**
+     * @dev See {IERC721Enumerable-totalSupply}.
+     */
+    function totalSupply() public view virtual override returns (uint256) {
+        return _allTokens.length;
+    }
+
+    /**
+     * @dev See {IERC721Enumerable-tokenByIndex}.
+     */
+    function tokenByIndex(uint256 index) public view virtual override returns (uint256) {
+        require(index < ERC721Enumerable.totalSupply(), "ERC721Enumerable: global index out of bounds");
+        return _allTokens[index];
+    }
+
+    /**
+     * @dev See {ERC721-_beforeTokenTransfer}.
+     */
+    function _beforeTokenTransfer(
+        address from,
+        address to,
+        uint256 firstTokenId,
+        uint256 batchSize
+    ) internal virtual override {
+        super._beforeTokenTransfer(from, to, firstTokenId, batchSize);
+
+        if (batchSize > 1) {
+            // Will only trigger during construction. Batch transferring (minting) is not available afterwards.
+            revert("ERC721Enumerable: consecutive transfers not supported");
+        }
+
+        uint256 tokenId = firstTokenId;
+
+        if (from == address(0)) {
+            _addTokenToAllTokensEnumeration(tokenId);
+        } else if (from != to) {
+            _removeTokenFromOwnerEnumeration(from, tokenId);
+        }
+        if (to == address(0)) {
+            _removeTokenFromAllTokensEnumeration(tokenId);
+        } else if (to != from) {
+            _addTokenToOwnerEnumeration(to, tokenId);
+        }
+    }
+
+    /**
+     * @dev Private function to add a token to this extension's ownership-tracking data structures.
+     * @param to address representing the new owner of the given token ID
+     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
+     */
+    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
+        uint256 length = ERC721.balanceOf(to);
+        _ownedTokens[to][length] = tokenId;
+        _ownedTokensIndex[tokenId] = length;
+    }
+
+    /**
+     * @dev Private function to add a token to this extension's token tracking data structures.
+     * @param tokenId uint256 ID of the token to be added to the tokens list
+     */
+    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
+        _allTokensIndex[tokenId] = _allTokens.length;
+        _allTokens.push(tokenId);
+    }
+
+    /**
+     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
+     * while the token is not assigned a new owner, the `_ownedTokensIndex` mapping is _not_ updated: this allows for
+     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
+     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
+     * @param from address representing the previous owner of the given token ID
+     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
+     */
+    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
+        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
+        // then delete the last slot (swap and pop).
+
+        uint256 lastTokenIndex = ERC721.balanceOf(from) - 1;
+        uint256 tokenIndex = _ownedTokensIndex[tokenId];
+
+        // When the token to delete is the last token, the swap operation is unnecessary
+        if (tokenIndex != lastTokenIndex) {
+            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];
+
+            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
+            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
+        }
+
+        // This also deletes the contents at the last position of the array
+        delete _ownedTokensIndex[tokenId];
+        delete _ownedTokens[from][lastTokenIndex];
+    }
+
+    /**
+     * @dev Private function to remove a token from this extension's token tracking data structures.
+     * This has O(1) time complexity, but alters the order of the _allTokens array.
+     * @param tokenId uint256 ID of the token to be removed from the tokens list
+     */
+    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
+        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
+        // then delete the last slot (swap and pop).
+
+        uint256 lastTokenIndex = _allTokens.length - 1;
+        uint256 tokenIndex = _allTokensIndex[tokenId];
+
+        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
+        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
+        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
+        uint256 lastTokenId = _allTokens[lastTokenIndex];
+
+        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
+        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
+
+        // This also deletes the contents at the last position of the array
+        delete _allTokensIndex[tokenId];
+        _allTokens.pop();
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Pausable.sol

@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.8.2) (token/ERC721/extensions/ERC721Pausable.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "../../../security/Pausable.sol";
+
+/**
+ * @dev ERC721 token with pausable token transfers, minting and burning.
+ *
+ * Useful for scenarios such as preventing trades until the end of an evaluation
+ * period, or having an emergency switch for freezing all token transfers in the
+ * event of a large bug.
+ *
+ * IMPORTANT: This contract does not include public pause and unpause functions. In
+ * addition to inheriting this contract, you must define both functions, invoking the
+ * {Pausable-_pause} and {Pausable-_unpause} internal functions, with appropriate
+ * access control, e.g. using {AccessControl} or {Ownable}. Not doing so will
+ * make the contract unpausable.
+ */
+abstract contract ERC721Pausable is ERC721, Pausable {
+    /**
+     * @dev See {ERC721-_beforeTokenTransfer}.
+     *
+     * Requirements:
+     *
+     * - the contract must not be paused.
+     */
+    function _beforeTokenTransfer(
+        address from,
+        address to,
+        uint256 firstTokenId,
+        uint256 batchSize
+    ) internal virtual override {
+        super._beforeTokenTransfer(from, to, firstTokenId, batchSize);
+
+        require(!paused(), "ERC721Pausable: token transfer while paused");
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Royalty.sol

@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.8.0) (token/ERC721/extensions/ERC721Royalty.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "../../common/ERC2981.sol";
+import "../../../utils/introspection/ERC165.sol";
+
+/**
+ * @dev Extension of ERC721 with the ERC2981 NFT Royalty Standard, a standardized way to retrieve royalty payment
+ * information.
+ *
+ * Royalty information can be specified globally for all token ids via {ERC2981-_setDefaultRoyalty}, and/or individually for
+ * specific token ids via {ERC2981-_setTokenRoyalty}. The latter takes precedence over the first.
+ *
+ * IMPORTANT: ERC-2981 only specifies a way to signal royalty information and does not enforce its payment. See
+ * https://eips.ethereum.org/EIPS/eip-2981#optional-royalty-payments[Rationale] in the EIP. Marketplaces are expected to
+ * voluntarily pay royalties together with sales, but note that this standard is not yet widely supported.
+ *
+ * _Available since v4.5._
+ */
+abstract contract ERC721Royalty is ERC2981, ERC721 {
+    /**
+     * @dev See {IERC165-supportsInterface}.
+     */
+    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, ERC2981) returns (bool) {
+        return super.supportsInterface(interfaceId);
+    }
+
+    /**
+     * @dev See {ERC721-_burn}. This override additionally clears the royalty information for the token.
+     */
+    function _burn(uint256 tokenId) internal virtual override {
+        super._burn(tokenId);
+        _resetTokenRoyalty(tokenId);
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721URIStorage.sol

@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/extensions/ERC721URIStorage.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "../../../interfaces/IERC4906.sol";
+
+/**
+ * @dev ERC721 token with storage based token URI management.
+ */
+abstract contract ERC721URIStorage is IERC4906, ERC721 {
+    using Strings for uint256;
+
+    // Optional mapping for token URIs
+    mapping(uint256 => string) private _tokenURIs;
+
+    /**
+     * @dev See {IERC165-supportsInterface}
+     */
+    function supportsInterface(bytes4 interfaceId) public view virtual override(ERC721, IERC165) returns (bool) {
+        return interfaceId == bytes4(0x49064906) || super.supportsInterface(interfaceId);
+    }
+
+    /**
+     * @dev See {IERC721Metadata-tokenURI}.
+     */
+    function tokenURI(uint256 tokenId) public view virtual override returns (string memory) {
+        _requireMinted(tokenId);
+
+        string memory _tokenURI = _tokenURIs[tokenId];
+        string memory base = _baseURI();
+
+        // If there is no base URI, return the token URI.
+        if (bytes(base).length == 0) {
+            return _tokenURI;
+        }
+        // If both are set, concatenate the baseURI and tokenURI (via abi.encodePacked).
+        if (bytes(_tokenURI).length > 0) {
+            return string(abi.encodePacked(base, _tokenURI));
+        }
+
+        return super.tokenURI(tokenId);
+    }
+
+    /**
+     * @dev Sets `_tokenURI` as the tokenURI of `tokenId`.
+     *
+     * Emits {MetadataUpdate}.
+     *
+     * Requirements:
+     *
+     * - `tokenId` must exist.
+     */
+    function _setTokenURI(uint256 tokenId, string memory _tokenURI) internal virtual {
+        require(_exists(tokenId), "ERC721URIStorage: URI set of nonexistent token");
+        _tokenURIs[tokenId] = _tokenURI;
+
+        emit MetadataUpdate(tokenId);
+    }
+
+    /**
+     * @dev See {ERC721-_burn}. This override additionally checks to see if a
+     * token-specific URI was set for the token, and if so, it deletes the token URI from
+     * the storage mapping.
+     */
+    function _burn(uint256 tokenId) internal virtual override {
+        super._burn(tokenId);
+
+        if (bytes(_tokenURIs[tokenId]).length != 0) {
+            delete _tokenURIs[tokenId];
+        }
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Votes.sol

@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/extensions/ERC721Votes.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+import "../../../governance/utils/Votes.sol";
+
+/**
+ * @dev Extension of ERC721 to support voting and delegation as implemented by {Votes}, where each individual NFT counts
+ * as 1 vote unit.
+ *
+ * Tokens do not count as votes until they are delegated, because votes must be tracked which incurs an additional cost
+ * on every transfer. Token holders can either delegate to a trusted representative who will decide how to make use of
+ * the votes in governance decisions, or they can delegate to themselves to be their own representative.
+ *
+ * _Available since v4.5._
+ */
+abstract contract ERC721Votes is ERC721, Votes {
+    /**
+     * @dev See {ERC721-_afterTokenTransfer}. Adjusts votes when tokens are transferred.
+     *
+     * Emits a {IVotes-DelegateVotesChanged} event.
+     */
+    function _afterTokenTransfer(
+        address from,
+        address to,
+        uint256 firstTokenId,
+        uint256 batchSize
+    ) internal virtual override {
+        _transferVotingUnits(from, to, batchSize);
+        super._afterTokenTransfer(from, to, firstTokenId, batchSize);
+    }
+
+    /**
+     * @dev Returns the balance of `account`.
+     *
+     * WARNING: Overriding this function will likely result in incorrect vote tracking.
+     */
+    function _getVotingUnits(address account) internal view virtual override returns (uint256) {
+        return balanceOf(account);
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/ERC721Wrapper.sol

@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC721/extensions/ERC721Wrapper.sol)
+
+pragma solidity ^0.8.0;
+
+import "../ERC721.sol";
+
+/**
+ * @dev Extension of the ERC721 token contract to support token wrapping.
+ *
+ * Users can deposit and withdraw an "underlying token" and receive a "wrapped token" with a matching tokenId. This is useful
+ * in conjunction with other modules. For example, combining this wrapping mechanism with {ERC721Votes} will allow the
+ * wrapping of an existing "basic" ERC721 into a governance token.
+ *
+ * _Available since v4.9.0_
+ */
+abstract contract ERC721Wrapper is ERC721, IERC721Receiver {
+    IERC721 private immutable _underlying;
+
+    constructor(IERC721 underlyingToken) {
+        _underlying = underlyingToken;
+    }
+
+    /**
+     * @dev Allow a user to deposit underlying tokens and mint the corresponding tokenIds.
+     */
+    function depositFor(address account, uint256[] memory tokenIds) public virtual returns (bool) {
+        uint256 length = tokenIds.length;
+        for (uint256 i = 0; i < length; ++i) {
+            uint256 tokenId = tokenIds[i];
+
+            // This is an "unsafe" transfer that doesn't call any hook on the receiver. With underlying() being trusted
+            // (by design of this contract) and no other contracts expected to be called from there, we are safe.
+            // slither-disable-next-line reentrancy-no-eth
+            underlying().transferFrom(_msgSender(), address(this), tokenId);
+            _safeMint(account, tokenId);
+        }
+
+        return true;
+    }
+
+    /**
+     * @dev Allow a user to burn wrapped tokens and withdraw the corresponding tokenIds of the underlying tokens.
+     */
+    function withdrawTo(address account, uint256[] memory tokenIds) public virtual returns (bool) {
+        uint256 length = tokenIds.length;
+        for (uint256 i = 0; i < length; ++i) {
+            uint256 tokenId = tokenIds[i];
+            require(_isApprovedOrOwner(_msgSender(), tokenId), "ERC721Wrapper: caller is not token owner or approved");
+            _burn(tokenId);
+            // Checks were already performed at this point, and there's no way to retake ownership or approval from
+            // the wrapped tokenId after this point, so it's safe to remove the reentrancy check for the next line.
+            // slither-disable-next-line reentrancy-no-eth
+            underlying().safeTransferFrom(address(this), account, tokenId);
+        }
+
+        return true;
+    }
+
+    /**
+     * @dev Overrides {IERC721Receiver-onERC721Received} to allow minting on direct ERC721 transfers to
+     * this contract.
+     *
+     * In case there's data attached, it validates that the operator is this contract, so only trusted data
+     * is accepted from {depositFor}.
+     *
+     * WARNING: Doesn't work with unsafe transfers (eg. {IERC721-transferFrom}). Use {ERC721Wrapper-_recover}
+     * for recovering in that scenario.
+     */
+    function onERC721Received(
+        address,
+        address from,
+        uint256 tokenId,
+        bytes memory
+    ) public virtual override returns (bytes4) {
+        require(address(underlying()) == _msgSender(), "ERC721Wrapper: caller is not underlying");
+        _safeMint(from, tokenId);
+        return IERC721Receiver.onERC721Received.selector;
+    }
+
+    /**
+     * @dev Mint a wrapped token to cover any underlyingToken that would have been transferred by mistake. Internal
+     * function that can be exposed with access control if desired.
+     */
+    function _recover(address account, uint256 tokenId) internal virtual returns (uint256) {
+        require(underlying().ownerOf(tokenId) == address(this), "ERC721Wrapper: wrapper is not token owner");
+        _safeMint(account, tokenId);
+        return tokenId;
+    }
+
+    /**
+     * @dev Returns the underlying token.
+     */
+    function underlying() public view virtual returns (IERC721) {
+        return _underlying;
+    }
+}

package/test/contracts/lib/openzeppelin-contracts/contracts/token/ERC721/extensions/IERC721Enumerable.sol

@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: MIT
+// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC721/extensions/IERC721Enumerable.sol)
+
+pragma solidity ^0.8.0;
+
+import "../IERC721.sol";
+
+/**
+ * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
+ * @dev See https://eips.ethereum.org/EIPS/eip-721
+ */
+interface IERC721Enumerable is IERC721 {
+    /**
+     * @dev Returns the total amount of tokens stored by the contract.
+     */
+    function totalSupply() external view returns (uint256);
+
+    /**
+     * @dev Returns a token ID owned by `owner` at a given `index` of its token list.
+     * Use along with {balanceOf} to enumerate all of ``owner``'s tokens.
+     */
+    function tokenOfOwnerByIndex(address owner, uint256 index) external view returns (uint256);
+
+    /**
+     * @dev Returns a token ID at a given `index` of all the tokens stored by the contract.
+     * Use along with {totalSupply} to enumerate all tokens.
+     */
+    function tokenByIndex(uint256 index) external view returns (uint256);
+}