@elice/material-exercise 1.260429.0-improvetimerpopoverui.0 → 1.260430.0

package/cjs/components/material-exercise/exercise-runner/arduino/ArduinoProviderSessionWriter.js

@@ -0,0 +1,70 @@
+'use strict';
+
+Object.defineProperty(exports, '__esModule', { value: true });
+
+var React = require('react');
+var intl = require('@elice/intl');
+var mcuBridge = require('@elice/mcu-bridge');
+var useArduinoTerminalWriter = require('./useArduinoTerminalWriter.js');
+
+function _interopDefaultCompat (e) { return e && typeof e === 'object' && 'default' in e ? e : { default: e }; }
+
+var React__default = /*#__PURE__*/_interopDefaultCompat(React);
+
+//
+//
+//
+var ArduinoProviderSessionWriter = function ArduinoProviderSessionWriter(_ref) {
+  var xtermRef = _ref.xtermRef;
+  var intl$1 = intl.useRawEliceIntl();
+  var session = mcuBridge.useSession();
+  var previousSessionRef = React__default.default.useRef(null);
+  var _useArduinoTerminalWr = useArduinoTerminalWriter.useArduinoTerminalWriter({
+      xtermRef: xtermRef
+    }),
+    write = _useArduinoTerminalWr.write,
+    writeSystemMessage = _useArduinoTerminalWr.writeSystemMessage;
+  //
+  // Pipe board serial output into xterm.
+  //
+  React__default.default.useEffect(function () {
+    if (!session) {
+      return;
+    }
+    var decoder = new TextDecoder();
+    return session.events.on('serial', function (chunk) {
+      write(decoder.decode(chunk));
+    });
+  }, [session, write]);
+  //
+  // Print board attach/detach lifecycle messages.
+  //
+  React__default.default.useEffect(function () {
+    var previous = previousSessionRef.current;
+    previousSessionRef.current = session;
+    if (!previous && session) {
+      writeSystemMessage(intl$1.formatMessage({
+        id: 'exerciseRunner.arduino.terminal.session.connected'
+      }, {
+        device: session.driver.board.name
+      }));
+      return;
+    }
+    if (previous && !session) {
+      writeSystemMessage(intl$1.formatMessage({
+        id: 'exerciseRunner.arduino.terminal.session.disconnected'
+      }));
+      return;
+    }
+    if (previous && session && previous !== session) {
+      writeSystemMessage(intl$1.formatMessage({
+        id: 'exerciseRunner.arduino.terminal.session.reconnected'
+      }, {
+        device: session.driver.board.name
+      }));
+    }
+  }, [session, writeSystemMessage, intl$1]);
+  return null;
+};
+
+exports.default = ArduinoProviderSessionWriter;

package/cjs/components/material-exercise/exercise-runner/arduino/_context.d.ts

@@ -0,0 +1,35 @@
+export type ArduinoBridgeIntent = 'compile' | 'upload';
+export type ArduinoConnectionIntent = 'connect' | 'upload';
+interface ArduinoBridgeContextValue {
+    /**
+     * Intent set by the Compile / Upload buttons just before the runner submit
+     * fires. The provider reads it when the compiled hex arrives over the stdio
+     * WebSocket to decide whether to flash.
+     */
+    setPendingIntent: (intent: ArduinoBridgeIntent) => void;
+    /**
+     * `true` between a Compile/Upload click and the arrival of the hex (or the
+     * flash terminating). Buttons gate themselves on this so a second click
+     * cannot overwrite the pending intent mid-round-trip.
+     */
+    isPending: boolean;
+    /** Readback for the button group to know when a flash is in flight. */
+    isFlashing: boolean;
+    /**
+     * Picks the connection-guide dialog's copy variant. The guide's open state
+     * is derived from `permissionStore.phase`; this only chooses the wording.
+     */
+    connectionIntent: ArduinoConnectionIntent | null;
+    setConnectionIntent: (intent: ArduinoConnectionIntent | null) => void;
+    /**
+     * Help dialog opened by the controller-area help button (and auto-opened
+     * once on first visit). Only the open flag lives here — the dialog owns
+     * its `wasAutoOpened` and `dontShowAgain` form state internally.
+     */
+    isHelpDialogOpen: boolean;
+    openHelpDialog: () => void;
+    closeHelpDialog: () => void;
+}
+export declare const ArduinoBridgeContext: import("react").Context<ArduinoBridgeContextValue | null>;
+export declare const useArduinoBridge: () => ArduinoBridgeContextValue;
+export {};

package/cjs/components/material-exercise/exercise-runner/arduino/_context.js

@@ -0,0 +1,18 @@
+'use strict';
+
+var React = require('react');
+
+//
+//
+//
+var ArduinoBridgeContext = React.createContext(null);
+var useArduinoBridge = function useArduinoBridge() {
+  var ctx = React.useContext(ArduinoBridgeContext);
+  if (!ctx) {
+    throw new Error('useArduinoBridge must be used inside <ArduinoBridgeProvider>.');
+  }
+  return ctx;
+};
+
+exports.ArduinoBridgeContext = ArduinoBridgeContext;
+exports.useArduinoBridge = useArduinoBridge;

package/cjs/components/material-exercise/exercise-runner/arduino/index.d.ts

@@ -0,0 +1,6 @@
+export { default as ArduinoBridgeProvider } from './ArduinoProvider';
+export { useArduinoBridge } from './_context';
+export { default as ArduinoControllerButtonGroup } from './ArduinoControllerButtonGroup';
+export { default as ArduinoControllerStatusMessage } from './ArduinoControllerStatusMessage';
+export type { ArduinoBridgeApi, ArduinoBridgeProviderProps } from './ArduinoProvider';
+export type { ArduinoBridgeIntent } from './_context';

package/cjs/components/material-exercise/exercise-runner/arduino/index.js

@@ -0,0 +1,13 @@
+'use strict';
+
+var ArduinoProvider = require('./ArduinoProvider.js');
+var _context = require('./_context.js');
+var ArduinoControllerButtonGroup = require('./ArduinoControllerButtonGroup.js');
+var ArduinoControllerStatusMessage = require('./ArduinoControllerStatusMessage.js');
+
+
+
+exports.ArduinoBridgeProvider = ArduinoProvider.default;
+exports.useArduinoBridge = _context.useArduinoBridge;
+exports.ArduinoControllerButtonGroup = ArduinoControllerButtonGroup.default;
+exports.ArduinoControllerStatusMessage = ArduinoControllerStatusMessage.default;

package/cjs/components/material-exercise/exercise-runner/arduino/useArduinoRunIntent.d.ts

@@ -0,0 +1,9 @@
+import React from 'react';
+import type { ArduinoBridgeIntent } from './_context';
+export interface UseArduinoRunIntentReturn {
+    pendingIntent: ArduinoBridgeIntent | null;
+    pendingIntentRef: React.MutableRefObject<ArduinoBridgeIntent | null>;
+    setRunIntent: (intent: ArduinoBridgeIntent) => void;
+    clearRunIntent: () => void;
+}
+export declare const useArduinoRunIntent: () => UseArduinoRunIntentReturn;

package/cjs/components/material-exercise/exercise-runner/arduino/useArduinoRunIntent.js

@@ -0,0 +1,38 @@
+'use strict';
+
+var _rollupPluginBabelHelpers = require('../../../../_virtual/_rollupPluginBabelHelpers.js');
+var React = require('react');
+
+function _interopDefaultCompat (e) { return e && typeof e === 'object' && 'default' in e ? e : { default: e }; }
+
+var React__default = /*#__PURE__*/_interopDefaultCompat(React);
+
+//
+//
+//
+var useArduinoRunIntent = function useArduinoRunIntent() {
+  var _return = React__default.default.useRef({});
+  var _React$useState = React__default.default.useState(null),
+    _React$useState2 = _rollupPluginBabelHelpers.slicedToArray(_React$useState, 2),
+    pendingIntent = _React$useState2[0],
+    setPendingIntent = _React$useState2[1];
+  var pendingIntentRef = React__default.default.useRef(null);
+  var setRunIntent = React__default.default.useCallback(function (intent) {
+    pendingIntentRef.current = intent;
+    setPendingIntent(intent);
+  }, []);
+  var clearRunIntent = React__default.default.useCallback(function () {
+    pendingIntentRef.current = null;
+    setPendingIntent(null);
+  }, []);
+  //
+  //
+  //
+  _return.current.pendingIntent = pendingIntent;
+  _return.current.pendingIntentRef = pendingIntentRef;
+  _return.current.setRunIntent = setRunIntent;
+  _return.current.clearRunIntent = clearRunIntent;
+  return _return.current;
+};
+
+exports.useArduinoRunIntent = useArduinoRunIntent;

package/cjs/components/material-exercise/exercise-runner/arduino/useArduinoTerminalWriter.d.ts

@@ -0,0 +1,10 @@
+import React from 'react';
+import type { XtermApis } from "../../../shared/xterm/Xterm";
+export interface UseArduinoTerminalWriterParams {
+    xtermRef: React.RefObject<XtermApis | null>;
+}
+export interface UseArduinoTerminalWriterReturn {
+    write: (text: string) => void;
+    writeSystemMessage: (text: string) => void;
+}
+export declare const useArduinoTerminalWriter: ({ xtermRef }: UseArduinoTerminalWriterParams) => UseArduinoTerminalWriterReturn;

package/cjs/components/material-exercise/exercise-runner/arduino/useArduinoTerminalWriter.js

@@ -0,0 +1,33 @@
+'use strict';
+
+var React = require('react');
+
+function _interopDefaultCompat (e) { return e && typeof e === 'object' && 'default' in e ? e : { default: e }; }
+
+var React__default = /*#__PURE__*/_interopDefaultCompat(React);
+
+//
+//
+//
+var ANSI_WRAP = function ANSI_WRAP(text) {
+  return "\x1B[1m\x1B[38;5;221m".concat(text, "\x1B[0m");
+};
+var useArduinoTerminalWriter = function useArduinoTerminalWriter(_ref) {
+  var xtermRef = _ref.xtermRef;
+  var _return = React__default.default.useRef({});
+  var write = React__default.default.useCallback(function (text) {
+    var _a;
+    (_a = xtermRef.current) === null || _a === void 0 ? void 0 : _a.write(text);
+  }, [xtermRef]);
+  var writeSystemMessage = React__default.default.useCallback(function (text) {
+    write(ANSI_WRAP(text));
+  }, [write]);
+  //
+  //
+  //
+  _return.current.write = write;
+  _return.current.writeSystemMessage = writeSystemMessage;
+  return _return.current;
+};
+
+exports.useArduinoTerminalWriter = useArduinoTerminalWriter;

package/cjs/components/material-exercise/exercise-runner/locales/en.json.js

@@ -2,6 +2,6 @@
 
 Object.defineProperty(exports, '__esModule', { value: true });
 
-var messageEn = {"exerciseRunner.controller.arduino.connectionStatus.connected":"Connected to Arduino","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"Connected to {device}","exerciseRunner.controller.arduino.connectionStatus.connecting":"Connecting to Elice Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.disconnected":"Disconnected from Elice Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.noDevice":"No connected device","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"Connecting to Elice Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.uploading":"Uploading...","exerciseRunner.controller.arduino.agent.title":"Connect to Agent","exerciseRunner.controller.arduino.agent.instruction.install":"1. Install Elice arduino agent","exerciseRunner.controller.arduino.agent.instruction.install.detail":"Install 'elice-arduino-agent' program to connect to arduino.","exerciseRunner.controller.arduino.agent.instruction.install.window":"Download for Windows","exerciseRunner.controller.arduino.agent.instruction.install.mac":"Download for MacOS","exerciseRunner.controller.arduino.agent.instruction.connect":"2. Connect to arduino","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"After the download is completed, it should be connected to exercise environment. If connection is unavailable, please follow the manual.\nClick the button below to read the manual.","exerciseRunner.controller.arduino.agent.instruction.connect.button":"Go to Manual","exerciseRunner.controller.arduino.agent.instruction.close":"Close","exerciseRunner.controller.buttonGroup.button.compile":"Compile","exerciseRunner.controller.buttonGroup.button.helpRequest":"Ask about the dragged code","exerciseRunner.controller.buttonGroup.button.run":"Run","exerciseRunner.controller.buttonGroup.button.stop":"Stop","exerciseRunner.controller.buttonGroup.button.submit":"Submit","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"Exercise without submission","exerciseRunner.controller.buttonGroup.button.syncRequest":"Sync code","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"Ask any questions you may have.","exerciseRunner.controller.runningInfo.error.fetch":"An error occurred while fetching running info","exerciseRunner.controller.runningInfo.lastRunningDatetime":"Last running datetime","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"Last submit datetime","exerciseRunner.controller.runningInfo.lastSubmitScore":"Last submit score","exerciseRunner.controller.runningInfo.score":"{score}","exerciseRunner.controller.statusMessage.closed":"Editor disconnected","exerciseRunner.controller.statusMessage.connecting":"Connecting to editor...","exerciseRunner.controller.statusMessage.open":"Editor connected","exerciseRunner.controller.tooltip.closed":"The connection to the code server is currently unstable, so your edits may not be saved.\nPlease check your network and try again.","exerciseRunner.controller.timer.runningRemainingTime":"Remaining: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"Reload page","exerciseRunner.submitErrorDialog.body.commonError":"An error occurred while running the code.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"You have exceeded the allowed number of lab submissions.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"The exercise image has been updated.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.networkError":"An error occurred while running the code.\nPlease refresh and try again.\nIf the problem persists, please check the network status.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"This exercise is not allowed to be submitted.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"The exercise room is being prepared.\nPlease try again later.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"The exercise room is running.\nPlease wait a moment.","exerciseRunner.submitErrorDialog.body.unknown":"An error occurred while running the code.\nPlease try again later.","exerciseRunner.submitErrorDialog.title":"Unable to run the code"};
+var messageEn = {"exerciseRunner.arduino.error.close":"Close","exerciseRunner.arduino.error.title":"Arduino connection error","exerciseRunner.arduino.help.button":"Help","exerciseRunner.arduino.help.title":"🤖 Welcome to the Arduino Lab!","exerciseRunner.arduino.help.greeting":"Write code in here to make a real Arduino board do things. Follow the steps below in order.","exerciseRunner.arduino.help.checklist.1.title":"Plug your Arduino board into the computer","exerciseRunner.arduino.help.checklist.1.body":"Connect the board with a USB cable, then click the [Connect] button next to the menu.","exerciseRunner.arduino.help.checklist.2.title":"Write code and press [Verify]","exerciseRunner.arduino.help.checklist.2.body":"Verify checks your code for problems before sending it.","exerciseRunner.arduino.help.checklist.3.title":"Press [Upload] to send it to the board","exerciseRunner.arduino.help.checklist.3.body":"Your program is sent to the Arduino board. Watch the serial window below for the results.","exerciseRunner.arduino.help.checklist.4.title":"If it works, press [Submit]!","exerciseRunner.arduino.help.checklist.4.body":"Submitting grades your code automatically and shows your score.","exerciseRunner.arduino.help.manual.title":"Need a usage guide?","exerciseRunner.arduino.help.manual.detail":"See the official manual for usage details.","exerciseRunner.arduino.help.dontShowAgain":"Don't show again","exerciseRunner.arduino.help.close":"Close","exerciseRunner.arduino.connectGuide.body":"For security, the browser shows the board picker directly. Find the small window under the address bar at the top-left of the screen and pick your Arduino board.","exerciseRunner.arduino.connectGuide.footer":"Don't see the window? Check the lock icon next to the address bar.","exerciseRunner.arduino.connectGuide.preview.cancel":"Cancel","exerciseRunner.arduino.connectGuide.preview.connect":"Connect","exerciseRunner.arduino.connectGuide.preview.host":"{host} wants to connect to a serial port","exerciseRunner.arduino.connectGuide.preview.label":"It will look like this","exerciseRunner.arduino.connectGuide.steps.1":"Click the entry whose name starts with {usbmodem} or {usbserial}.","exerciseRunner.arduino.connectGuide.steps.2":"Press the {connect} button at the bottom right to connect.","exerciseRunner.arduino.connectGuide.steps.3":"If you click {cancel} by mistake, you can try again.","exerciseRunner.arduino.connectGuide.title.connect":"Select your board in the browser","exerciseRunner.arduino.connectGuide.title.upload":"Let's connect the board first","exerciseRunner.arduino.connectGuide.upload.note":"Connecting the board is required to upload. Once connected, the upload will start automatically.","exerciseRunner.arduino.terminal.board.notConnected":"/* Arduino is not connected. Please connect and try again. */\n","exerciseRunner.arduino.terminal.compile.done":"/* Compile complete. */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* Failed to read the firmware file. */\n","exerciseRunner.arduino.terminal.session.connected":"/* [connected] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [disconnected] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [reconnected] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* Upload complete. */\n","exerciseRunner.arduino.terminal.upload.error":"/* Error: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"Unknown","exerciseRunner.arduino.terminal.upload.progress":"/* Uploading... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* Starting upload. */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* Verifying... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} connected","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"Board connected","exerciseRunner.controller.arduino.boardStatus.disconnected":"Disconnected","exerciseRunner.controller.arduino.boardStatus.idle":"Arduino board not connected","exerciseRunner.controller.arduino.boardStatus.reconnecting":"Reconnecting","exerciseRunner.controller.arduino.button.compile":"Compile","exerciseRunner.controller.arduino.button.connect":"Connect","exerciseRunner.controller.arduino.button.disconnect":"Disconnect","exerciseRunner.controller.arduino.button.upload":"Upload","exerciseRunner.controller.arduino.button.verify":"Verify","exerciseRunner.controller.buttonGroup.button.helpRequest":"Ask about the dragged code","exerciseRunner.controller.buttonGroup.button.run":"Run","exerciseRunner.controller.buttonGroup.button.stop":"Stop","exerciseRunner.controller.buttonGroup.button.submit":"Submit","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"Exercise without submission","exerciseRunner.controller.buttonGroup.button.syncRequest":"Sync code","exerciseRunner.controller.runningInfo.error.fetch":"An error occurred while fetching running info","exerciseRunner.controller.runningInfo.lastRunningDatetime":"Last running datetime","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"Last submit datetime","exerciseRunner.controller.runningInfo.lastSubmitScore":"Last submit score","exerciseRunner.controller.runningInfo.score":"{score}","exerciseRunner.controller.statusMessage.closed":"Editor disconnected","exerciseRunner.controller.statusMessage.connecting":"Connecting to editor...","exerciseRunner.controller.statusMessage.open":"Editor connected","exerciseRunner.controller.timer.runningRemainingTime":"Remaining: {remainingTime}","exerciseRunner.controller.tooltip.closed":"The connection to the code server is currently unstable, so your edits may not be saved.\nPlease check your network and try again.","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"Reload page","exerciseRunner.submitErrorDialog.body.commonError":"An error occurred while running the code.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"You have exceeded the allowed number of lab submissions.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"The exercise image has been updated.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.networkError":"An error occurred while running the code.\nPlease refresh and try again.\nIf the problem persists, please check the network status.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"This exercise is not allowed to be submitted.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"The exercise room is being prepared.\nPlease try again later.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"The exercise room is running.\nPlease wait a moment.","exerciseRunner.submitErrorDialog.body.unknown":"An error occurred while running the code.\nPlease try again later.","exerciseRunner.submitErrorDialog.title":"Unable to run the code"};
 
 exports.default = messageEn;

package/cjs/components/material-exercise/exercise-runner/locales/ja.json.js

@@ -2,6 +2,6 @@
 
 Object.defineProperty(exports, '__esModule', { value: true });
 
-var ja = {"exerciseRunner.controller.arduino.connectionStatus.connected":"Arduinoに接続されました","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"{device}に接続されました","exerciseRunner.controller.arduino.connectionStatus.connecting":"Elice Arduino エージェントに接続中","exerciseRunner.controller.arduino.connectionStatus.disconnected":"Elice Arduino エージェントから切断されました","exerciseRunner.controller.arduino.connectionStatus.noDevice":"接続されたデバイスはありません。","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"Elice Arduino エージェントに接続中","exerciseRunner.controller.arduino.connectionStatus.uploading":"アップロード中...","exerciseRunner.controller.arduino.agent.title":"エージェントに接続します","exerciseRunner.controller.arduino.agent.instruction.install":"1. Elice Arduino エージェントをインストールします。","exerciseRunner.controller.arduino.agent.instruction.install.detail":"'elice-arduino-agent' プログラムをインストールして Arduino に接続してください。","exerciseRunner.controller.arduino.agent.instruction.install.window":"Windows用のダウンロード","exerciseRunner.controller.arduino.agent.instruction.install.mac":"MacOS用のダウンロード","exerciseRunner.controller.arduino.agent.instruction.connect":"2. Arduinoに接続します。","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"ダウンロードが完了したら、運動環境に接続する必要があります。接続できない場合は、マニュアルに従ってください。\nマニュアルを読むために下のボタンをクリックしてください。","exerciseRunner.controller.arduino.agent.instruction.connect.button":"マニュアルを参照してください。","exerciseRunner.controller.arduino.agent.instruction.close":"閉じる","exerciseRunner.controller.buttonGroup.button.compile":"コンパイル","exerciseRunner.controller.buttonGroup.button.helpRequest":"ドラッグしたコードの質問","exerciseRunner.controller.buttonGroup.button.run":"ラン","exerciseRunner.controller.buttonGroup.button.stop":"停止","exerciseRunner.controller.buttonGroup.button.submit":"提出","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"提出なしの運動","exerciseRunner.controller.buttonGroup.button.syncRequest":"コードを同期します","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"どんな質問がありますか。","exerciseRunner.controller.runningInfo.error.fetch":"ランニング情報を取得中にエラーが発生しました。","exerciseRunner.controller.runningInfo.lastRunningDatetime":"最終実行日時","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"最終送信日時","exerciseRunner.controller.runningInfo.lastSubmitScore":"最後に提出したスコア","exerciseRunner.controller.runningInfo.score":"{得点}","exerciseRunner.controller.statusMessage.closed":"エディタが切断されました。","exerciseRunner.controller.statusMessage.connecting":"エディタへの接続中...","exerciseRunner.controller.statusMessage.open":"エディターが接続されました","exerciseRunner.controller.tooltip.closed":"現在、コードサーバーとの接続が不安定なため、編集内容が反映されない可能性があります。\nネットワークの状態を確認してから作業を続けてください。","exerciseRunner.controller.timer.runningRemainingTime":"残り時間: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"ページをリロードしてください。","exerciseRunner.submitErrorDialog.body.commonError":"コードを実行中にエラーが発生しました。\nページを更新してもう一度お試しください。","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"許可された実験提出回数を超えています。","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"エクササイズ画像が更新されました。\nもう一度更新してやり直してください。","exerciseRunner.submitErrorDialog.body.networkError":"コードを実行中にエラーが発生しました。\nページを更新して、もう一度お試しください。\n問題が解決しない場合は、ネットワークの状態を確認してください。","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"この演習は提出してはいけません。","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"エクササイズルームは準備中です。\n後で再試行してください。","exerciseRunner.submitErrorDialog.body.roomIsBusy":"運動室は稼働しています。\n少々お待ちください。","exerciseRunner.submitErrorDialog.body.unknown":"コードの実行中にエラーが発生しました。\n後でもう一度お試しください。","exerciseRunner.submitErrorDialog.title":"コードを実行できません。"};
+var ja = {"exerciseRunner.arduino.connectGuide.body":"セキュリティのため、ブラウザがボード選択ウィンドウを直接表示します。画面左上のアドレスバー下に表示される小さなウィンドウから Arduino ボードを選択してください。","exerciseRunner.arduino.connectGuide.footer":"ウィンドウが表示されない場合は、アドレスバーの鍵アイコンを確認してください。","exerciseRunner.arduino.connectGuide.preview.cancel":"キャンセル","exerciseRunner.arduino.connectGuide.preview.connect":"接続","exerciseRunner.arduino.connectGuide.preview.host":"{host} がシリアルポートに接続しようとしています","exerciseRunner.arduino.connectGuide.preview.label":"このようなウィンドウが表示されます","exerciseRunner.arduino.connectGuide.steps.1":"{usbmodem} または {usbserial} で始まる名前の項目をクリックしてください。","exerciseRunner.arduino.connectGuide.steps.2":"右下の {connect} ボタンを押すと接続されます。","exerciseRunner.arduino.connectGuide.steps.3":"誤って {cancel} を押した場合は、もう一度試すことができます。","exerciseRunner.arduino.connectGuide.title.connect":"ブラウザでボードを選択してください","exerciseRunner.arduino.connectGuide.title.upload":"まずボードを接続します","exerciseRunner.arduino.connectGuide.upload.note":"アップロードにはボードの接続が必要です。接続が完了するとすぐにアップロードが始まります。","exerciseRunner.arduino.error.close":"閉じる","exerciseRunner.arduino.error.title":"Arduino 接続エラー","exerciseRunner.arduino.help.button":"ヘルプ","exerciseRunner.arduino.help.checklist.1.body":"USB ケーブルでボードをコンピュータに接続し、メニューの隣にある [接続] ボタンをクリックしてください。","exerciseRunner.arduino.help.checklist.1.title":"Arduino ボードをコンピュータに接続します","exerciseRunner.arduino.help.checklist.2.body":"確認では、送信前にコードに問題がないかチェックします。","exerciseRunner.arduino.help.checklist.2.title":"コードを書いて [確認] を押します","exerciseRunner.arduino.help.checklist.3.body":"Arduino ボードに作成したプログラムが送信されます。下のシリアルウィンドウで結果を確認できます。","exerciseRunner.arduino.help.checklist.3.title":"[アップロード] でボードに送信します","exerciseRunner.arduino.help.checklist.4.body":"提出すると自動的に採点され、点数が表示されます。","exerciseRunner.arduino.help.checklist.4.title":"うまく動いたら [提出]！","exerciseRunner.arduino.help.close":"閉じる","exerciseRunner.arduino.help.dontShowAgain":"次回から表示しない","exerciseRunner.arduino.help.greeting":"ここにコードを書いて、本物の Arduino ボードを動かしてみましょう。下の手順を順番に進めてください。","exerciseRunner.arduino.help.manual.detail":"公式マニュアルで詳しい使い方を確認できます。","exerciseRunner.arduino.help.manual.title":"使い方を知りたいですか？","exerciseRunner.arduino.help.title":"🤖 Arduino ラボへようこそ！","exerciseRunner.arduino.terminal.board.notConnected":"/* Arduino が接続されていません。接続後もう一度お試しください。 */\n","exerciseRunner.arduino.terminal.compile.done":"/* コンパイルが完了しました。 */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* ファームウェアファイルを読み取れませんでした。 */\n","exerciseRunner.arduino.terminal.session.connected":"/* [接続] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [切断] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [再接続] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* アップロードが完了しました。 */\n","exerciseRunner.arduino.terminal.upload.error":"/* エラーが発生しました: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"不明","exerciseRunner.arduino.terminal.upload.progress":"/* アップロード中... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* アップロードを開始します。 */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* 確認中... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} 接続済み","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"ボード接続済み","exerciseRunner.controller.arduino.boardStatus.disconnected":"切断","exerciseRunner.controller.arduino.boardStatus.idle":"Arduino ボード未接続","exerciseRunner.controller.arduino.boardStatus.reconnecting":"再接続中","exerciseRunner.controller.arduino.button.compile":"コンパイル","exerciseRunner.controller.arduino.button.connect":"接続","exerciseRunner.controller.arduino.button.disconnect":"切断","exerciseRunner.controller.arduino.button.upload":"アップロード","exerciseRunner.controller.arduino.button.verify":"確認","exerciseRunner.controller.buttonGroup.button.helpRequest":"ドラッグしたコードの質問","exerciseRunner.controller.buttonGroup.button.run":"ラン","exerciseRunner.controller.buttonGroup.button.stop":"停止","exerciseRunner.controller.buttonGroup.button.submit":"提出","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"提出なしの運動","exerciseRunner.controller.buttonGroup.button.syncRequest":"コードを同期します","exerciseRunner.controller.runningInfo.error.fetch":"ランニング情報を取得中にエラーが発生しました。","exerciseRunner.controller.runningInfo.lastRunningDatetime":"最終実行日時","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"最終送信日時","exerciseRunner.controller.runningInfo.lastSubmitScore":"最後に提出したスコア","exerciseRunner.controller.runningInfo.score":"{score} 点","exerciseRunner.controller.statusMessage.closed":"エディタが切断されました。","exerciseRunner.controller.statusMessage.connecting":"エディタへの接続中...","exerciseRunner.controller.statusMessage.open":"エディターが接続されました","exerciseRunner.controller.timer.runningRemainingTime":"残り時間: {remainingTime}","exerciseRunner.controller.tooltip.closed":"現在、コードサーバーとの接続が不安定なため、編集内容が反映されない可能性があります。\nネットワークの状態を確認してから作業を続けてください。","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"ページをリロードしてください。","exerciseRunner.submitErrorDialog.body.commonError":"コードを実行中にエラーが発生しました。\nページを更新してもう一度お試しください。","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"許可された実験提出回数を超えています。","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"エクササイズ画像が更新されました。\nもう一度更新してやり直してください。","exerciseRunner.submitErrorDialog.body.networkError":"コードを実行中にエラーが発生しました。\nページを更新して、もう一度お試しください。\n問題が解決しない場合は、ネットワークの状態を確認してください。","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"この演習は提出してはいけません。","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"エクササイズルームは準備中です。\n後で再試行してください。","exerciseRunner.submitErrorDialog.body.roomIsBusy":"運動室は稼働しています。\n少々お待ちください。","exerciseRunner.submitErrorDialog.body.unknown":"コードの実行中にエラーが発生しました。\n後でもう一度お試しください。","exerciseRunner.submitErrorDialog.title":"コードを実行できません。"};
 
 exports.default = ja;

package/cjs/components/material-exercise/exercise-runner/locales/ko.json.js

@@ -2,6 +2,6 @@
 
 Object.defineProperty(exports, '__esModule', { value: true });
 
-var messageKo = {"exerciseRunner.controller.arduino.connectionStatus.connected":"아두이노 기기 연결됨","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"{device} 연결됨","exerciseRunner.controller.arduino.connectionStatus.connecting":"엘리스 아두이노 에이전트 연결 중","exerciseRunner.controller.arduino.connectionStatus.disconnected":"엘리스 아두이노 에이전트 연결 끊김","exerciseRunner.controller.arduino.connectionStatus.noDevice":"연결된 기기 없음","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"엘리스 아두이노 에이전트 연결 중","exerciseRunner.controller.arduino.connectionStatus.uploading":"업로드 중","exerciseRunner.controller.arduino.agent.title":"에이전트 연결","exerciseRunner.controller.arduino.agent.instruction.install":"1. 엘리스 아두이노 에이전트 설치하기","exerciseRunner.controller.arduino.agent.instruction.install.detail":"아두이노와 연결하기 위해 ‘엘리스 아두이노 에이전트'를 설치해주세요.","exerciseRunner.controller.arduino.agent.instruction.install.window":"Windows 용 설치","exerciseRunner.controller.arduino.agent.instruction.install.mac":"MacOS 용 설치","exerciseRunner.controller.arduino.agent.instruction.connect":"2. 연결하기","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"다운로드를 완료하였다면 실습 환경과 연결이 필요합니다. 연결되지 않을 경우 매뉴얼을 확인하세요.\n아래 버튼을 클릭해 매뉴얼을 확인하실 수 있습니다.","exerciseRunner.controller.arduino.agent.instruction.connect.button":"매뉴얼 이동","exerciseRunner.controller.arduino.agent.instruction.close":"닫기","exerciseRunner.controller.buttonGroup.button.compile":"컴파일","exerciseRunner.controller.buttonGroup.button.helpRequest":"드래그한 코드 질문","exerciseRunner.controller.buttonGroup.button.run":"실행","exerciseRunner.controller.buttonGroup.button.stop":"정지","exerciseRunner.controller.buttonGroup.button.submit":"제출","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"실행만 가능한 실습입니다.","exerciseRunner.controller.buttonGroup.button.syncRequest":"코드 동기화","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"궁금한 사항을 질문해 보세요.","exerciseRunner.controller.runningInfo.error.fetch":"최종 실행 내역을 가져오는데 문제가 발생하였습니다.","exerciseRunner.controller.runningInfo.lastRunningDatetime":"최종 실행 시간","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"최종 제출 시간","exerciseRunner.controller.runningInfo.lastSubmitScore":"최종 제출 점수","exerciseRunner.controller.runningInfo.score":"{score} 점","exerciseRunner.controller.statusMessage.closed":"에디터 연결 끊김","exerciseRunner.controller.statusMessage.connecting":"에디터 연결 중...","exerciseRunner.controller.statusMessage.open":"에디터 연결됨","exerciseRunner.controller.tooltip.closed":"현재 코드 서버와 네트워크 연결 상태가 불안정하여 편집 내용이 반영되지 않습니다.\n네트워크 상태를 확인하여 코드 작성을 진행해주세요.","exerciseRunner.controller.timer.runningRemainingTime":"실행 제한시간: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"확인","exerciseRunner.submitErrorDialog.action.reload":"새로고침","exerciseRunner.submitErrorDialog.body.commonError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"실습 제출 허용 횟수를 초과했습니다.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"실습환경이 업데이트 되었습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.networkError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.\n문제가 계속되면 네트워크 상태를 확인해주세요.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"제출이 허용되지 않은 실습입니다.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"실습환경이 준비 중입니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"실습을 실행하고 있습니다.\n잠시만 기다려 주세요.","exerciseRunner.submitErrorDialog.body.unknown":"코드 실행 중 오류가 발생했습니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.title":"실습을 실행할 수 없습니다"};
+var messageKo = {"exerciseRunner.arduino.error.close":"닫기","exerciseRunner.arduino.error.title":"아두이노 연결 오류","exerciseRunner.arduino.help.button":"도움말","exerciseRunner.arduino.help.title":"🤖 아두이노 실습실에 오신 걸 환영해요!","exerciseRunner.arduino.help.greeting":"이 실습실에서는 코드를 작성해서 진짜 아두이노 보드를 움직여볼 수 있어요. 아래 단계를 차례로 따라해보세요.","exerciseRunner.arduino.help.checklist.1.title":"아두이노 보드를 컴퓨터에 연결해요","exerciseRunner.arduino.help.checklist.1.body":"USB 케이블로 보드를 컴퓨터에 꽂은 뒤, 메뉴 옆 [연결하기] 버튼을 누르세요.","exerciseRunner.arduino.help.checklist.2.title":"코드를 작성하고 [확인]을 눌러요","exerciseRunner.arduino.help.checklist.2.body":"확인 버튼은 코드에 문제가 없는지 검사해줘요.","exerciseRunner.arduino.help.checklist.3.title":"[업로드]로 보드에 전송해요","exerciseRunner.arduino.help.checklist.3.body":"아두이노 보드에 작성한 프로그램을 보내요. 아래 시리얼 창에서 결과를 볼 수 있어요.","exerciseRunner.arduino.help.checklist.4.title":"잘 동작하면 [제출]!","exerciseRunner.arduino.help.checklist.4.body":"제출하면 자동으로 채점이 되고 점수를 알려줘요.","exerciseRunner.arduino.help.manual.title":"사용 방법이 궁금하신가요?","exerciseRunner.arduino.help.manual.detail":"공식 매뉴얼에서 자세한 사용법을 확인할 수 있어요.","exerciseRunner.arduino.help.dontShowAgain":"다시 보지 않기","exerciseRunner.arduino.help.close":"닫기","exerciseRunner.arduino.connectGuide.body":"보안을 위해 브라우저가 직접 보드 선택 창을 띄워요. 화면 왼쪽 위 주소창 아래에 나타나는 작은 창에서 내 아두이노 보드를 골라주세요.","exerciseRunner.arduino.connectGuide.footer":"창이 안 보이면 주소창 옆 자물쇠 아이콘을 확인해보세요","exerciseRunner.arduino.connectGuide.preview.cancel":"취소","exerciseRunner.arduino.connectGuide.preview.connect":"연결","exerciseRunner.arduino.connectGuide.preview.host":"{host}에서 시리얼 포트에 연결하려고 합니다.","exerciseRunner.arduino.connectGuide.preview.label":"이렇게 생긴 창이 떠요","exerciseRunner.arduino.connectGuide.steps.1":"이름이 {usbmodem} 또는 {usbserial}로 시작하는 항목을 클릭하세요.","exerciseRunner.arduino.connectGuide.steps.2":"오른쪽 아래 {connect} 버튼을 누르면 연결돼요.","exerciseRunner.arduino.connectGuide.steps.3":"실수로 {cancel}을 눌러도 다시 시도할 수 있어요.","exerciseRunner.arduino.connectGuide.title.connect":"브라우저에서 보드 선택해주세요","exerciseRunner.arduino.connectGuide.title.upload":"보드를 먼저 연결할게요","exerciseRunner.arduino.connectGuide.upload.note":"업로드를 위해 보드 연결이 필요해요. 연결이 끝나면 바로 업로드가 시작돼요.","exerciseRunner.arduino.terminal.board.notConnected":"/* 아두이노가 연결되어 있지 않습니다. 연결 후 다시 시도해 주세요. */\n","exerciseRunner.arduino.terminal.compile.done":"/* 컴파일이 완료되었습니다. */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* 펌웨어 파일을 읽지 못했습니다. */\n","exerciseRunner.arduino.terminal.session.connected":"/* [연결됨] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [연결 끊김] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [재연결] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* 업로드가 완료되었습니다. */\n","exerciseRunner.arduino.terminal.upload.error":"/* 에러가 발생했습니다: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"알 수 없음","exerciseRunner.arduino.terminal.upload.progress":"/* 업로드 중입니다... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* 업로드를 시작합니다. */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* 확인 중입니다... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} 연결됨","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"보드 연결됨","exerciseRunner.controller.arduino.boardStatus.disconnected":"연결 끊김","exerciseRunner.controller.arduino.boardStatus.idle":"아두이노 보드 연결 안 됨","exerciseRunner.controller.arduino.boardStatus.reconnecting":"재연결 중","exerciseRunner.controller.arduino.button.compile":"컴파일(확인)","exerciseRunner.controller.arduino.button.connect":"연결하기","exerciseRunner.controller.arduino.button.disconnect":"연결 해제","exerciseRunner.controller.arduino.button.upload":"업로드","exerciseRunner.controller.arduino.button.verify":"확인","exerciseRunner.controller.buttonGroup.button.helpRequest":"드래그한 코드 질문","exerciseRunner.controller.buttonGroup.button.run":"실행","exerciseRunner.controller.buttonGroup.button.stop":"정지","exerciseRunner.controller.buttonGroup.button.submit":"제출","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"실행만 가능한 실습입니다.","exerciseRunner.controller.buttonGroup.button.syncRequest":"코드 동기화","exerciseRunner.controller.runningInfo.error.fetch":"최종 실행 내역을 가져오는데 문제가 발생하였습니다.","exerciseRunner.controller.runningInfo.lastRunningDatetime":"최종 실행 시간","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"최종 제출 시간","exerciseRunner.controller.runningInfo.lastSubmitScore":"최종 제출 점수","exerciseRunner.controller.runningInfo.score":"{score} 점","exerciseRunner.controller.statusMessage.closed":"에디터 연결 끊김","exerciseRunner.controller.statusMessage.connecting":"에디터 연결 중...","exerciseRunner.controller.statusMessage.open":"에디터 연결됨","exerciseRunner.controller.timer.runningRemainingTime":"실행 제한시간: {remainingTime}","exerciseRunner.controller.tooltip.closed":"현재 코드 서버와 네트워크 연결 상태가 불안정하여 편집 내용이 반영되지 않습니다.\n네트워크 상태를 확인하여 코드 작성을 진행해주세요.","exerciseRunner.submitErrorDialog.action.confirm":"확인","exerciseRunner.submitErrorDialog.action.reload":"새로고침","exerciseRunner.submitErrorDialog.body.commonError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"실습 제출 허용 횟수를 초과했습니다.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"실습환경이 업데이트 되었습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.networkError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.\n문제가 계속되면 네트워크 상태를 확인해주세요.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"제출이 허용되지 않은 실습입니다.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"실습환경이 준비 중입니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"실습을 실행하고 있습니다.\n잠시만 기다려 주세요.","exerciseRunner.submitErrorDialog.body.unknown":"코드 실행 중 오류가 발생했습니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.title":"실습을 실행할 수 없습니다"};
 
 exports.default = messageKo;

package/cjs/components/material-exercise/exercise-runner/locales/th.json.js

@@ -2,6 +2,6 @@
 
 Object.defineProperty(exports, '__esModule', { value: true });
 
-var th = {"exerciseRunner.controller.arduino.connectionStatus.connected":"เชื่อมต่อกับ Arduino แล้ว","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"เชื่อมต่อกับ {device}","exerciseRunner.controller.arduino.connectionStatus.connecting":"กำลังเชื่อมต่อกับ Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.disconnected":"ตัดการเชื่อมต่อกับ Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.noDevice":"ไม่พบอุปกรณ์ที่เชื่อมต่อ","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"กำลังเชื่อมต่อกับ Arduino Agent ใหม่","exerciseRunner.controller.arduino.connectionStatus.uploading":"กำลังอัปโหลด...","exerciseRunner.controller.arduino.agent.title":"เชื่อมต่อ Agent","exerciseRunner.controller.arduino.agent.instruction.install":"1. ติดตั้ง Arduino Agent","exerciseRunner.controller.arduino.agent.instruction.install.detail":"ติดตั้งโปรแกรม 'elice-arduino-agent' เพื่อเชื่อมต่อกับ Arduino ค่ะ.","exerciseRunner.controller.arduino.agent.instruction.install.window":"ดาวน์โหลดสำหรับ Windows","exerciseRunner.controller.arduino.agent.instruction.install.mac":"ดาวน์โหลดสำหรับ MacOS","exerciseRunner.controller.arduino.agent.instruction.connect":"2. เชื่อมต่อกับ Arduino","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"หลังจากการดาวน์โหลดเสร็จสิ้นแล้ว ควรเชื่อมต่อกับสภาพแวดล้อมการฝึกหัด หากไม่สามารถเชื่อมต่อได้ โปรดทำตามคู่มือ\nคลิกที่ปุ่มด้านล่างเพื่ออ่านคู่มือ","exerciseRunner.controller.arduino.agent.instruction.connect.button":"ไปที่คู่มือ","exerciseRunner.controller.arduino.agent.instruction.close":"ปิด","exerciseRunner.controller.buttonGroup.button.compile":"คอมไพล์","exerciseRunner.controller.buttonGroup.button.helpRequest":"ถามเกี่ยวกับโค้ดที่ลาก","exerciseRunner.controller.buttonGroup.button.run":"เรียกใช้งาน","exerciseRunner.controller.buttonGroup.button.stop":"หยุด","exerciseRunner.controller.buttonGroup.button.submit":"ส่ง","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"การฝึกอบรมนี้รองรับเฉพาะการรันเท่านั้น","exerciseRunner.controller.buttonGroup.button.syncRequest":"ซิงค์โค้ด","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"ถามคำถามได้เลยค่ะ","exerciseRunner.controller.runningInfo.error.fetch":"เกิดข้อผิดพลาดขณะดึงข้อมูลการทำงานใหม่","exerciseRunner.controller.runningInfo.lastRunningDatetime":"วันที่และเวลาที่ทำการเรียกใช้ครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"เวลาส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitScore":"คะแนนส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.score":"{score} คะแนน","exerciseRunner.controller.statusMessage.closed":"การเชื่อมต่อกับ Editor ถูกยกเลิก","exerciseRunner.controller.statusMessage.connecting":"กำลังเชื่อมต่อกับ Editor...","exerciseRunner.controller.statusMessage.open":"เชื่อมต่อกับ Editor สำเร็จ","exerciseRunner.controller.tooltip.closed":"ขณะนี้การเชื่อมต่อกับเซิร์ฟเวอร์โค้ดไม่เสถียร การแก้ไขของคุณอาจไม่ถูกบันทึก\nกรุณาตรวจสอบเครือข่ายของคุณก่อนดำเนินการต่อ","exerciseRunner.controller.timer.runningRemainingTime":"เวลาที่เหลืออยู่: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"ยืนยัน","exerciseRunner.submitErrorDialog.action.reload":"โหลดหน้าใหม่","exerciseRunner.submitErrorDialog.body.commonError":"เกิดข้อผิดพลาดขณะรันโค้ด\nโปรดรีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"คุณส่งเกินจำนวนที่กำหนด","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"สภาพแวดล้อมการฝึกอบรมหมดอายุ กรุณารีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.networkError":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารีเฟรชและลองอีกครั้ง\nหากยังมีปัญหา กรุณาตรวจสอบสภาพการเชื่อมต่ออินเทอร์เน็ต","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"การส่งผลงานสำหรับการฝึกอบรมนี้ไม่ถูกต้อง","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"สภาพแวดล้อมการฝึกอบรมกำลังถูกตั้งค่า กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.roomIsBusy":"มีการรันโค้ดอยู่ในขณะนี้ กรุณารอจนกว่าจะเสร็จสิ้น","exerciseRunner.submitErrorDialog.body.unknown":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.title":"ไม่สามารถรันโค้ดได้"};
+var th = {"exerciseRunner.arduino.connectGuide.body":"เพื่อความปลอดภัย เบราว์เซอร์จะแสดงหน้าต่างเลือกบอร์ดให้โดยตรง โปรดมองหาหน้าต่างเล็กๆ ใต้แถบที่อยู่บริเวณซ้ายบนของหน้าจอ แล้วเลือกบอร์ด Arduino ของคุณ","exerciseRunner.arduino.connectGuide.footer":"ถ้ามองไม่เห็นหน้าต่าง ลองตรวจสอบไอคอนกุญแจข้างแถบที่อยู่","exerciseRunner.arduino.connectGuide.preview.cancel":"ยกเลิก","exerciseRunner.arduino.connectGuide.preview.connect":"เชื่อมต่อ","exerciseRunner.arduino.connectGuide.preview.host":"{host} ต้องการเชื่อมต่อกับพอร์ตอนุกรม","exerciseRunner.arduino.connectGuide.preview.label":"หน้าต่างจะมีลักษณะแบบนี้","exerciseRunner.arduino.connectGuide.steps.1":"คลิกที่รายการที่มีชื่อขึ้นต้นด้วย {usbmodem} หรือ {usbserial}","exerciseRunner.arduino.connectGuide.steps.2":"กดปุ่ม {connect} ที่มุมขวาล่างเพื่อเชื่อมต่อ","exerciseRunner.arduino.connectGuide.steps.3":"ถ้าเผลอกด {cancel} ก็สามารถลองใหม่ได้","exerciseRunner.arduino.connectGuide.title.connect":"เลือกบอร์ดในเบราว์เซอร์","exerciseRunner.arduino.connectGuide.title.upload":"เชื่อมต่อบอร์ดก่อน","exerciseRunner.arduino.connectGuide.upload.note":"การอัปโหลดต้องใช้การเชื่อมต่อบอร์ด เมื่อเชื่อมต่อเสร็จ การอัปโหลดจะเริ่มทันที","exerciseRunner.arduino.error.close":"ปิด","exerciseRunner.arduino.error.title":"เกิดข้อผิดพลาดในการเชื่อมต่อ Arduino","exerciseRunner.arduino.help.button":"วิธีใช้","exerciseRunner.arduino.help.checklist.1.body":"เชื่อมต่อบอร์ดกับคอมพิวเตอร์ด้วยสาย USB จากนั้นคลิกปุ่ม [เชื่อมต่อ] ที่อยู่ข้างเมนู","exerciseRunner.arduino.help.checklist.1.title":"เชื่อมต่อบอร์ด Arduino กับคอมพิวเตอร์","exerciseRunner.arduino.help.checklist.2.body":"ปุ่มตรวจสอบจะตรวจหาปัญหาในโค้ดก่อนที่จะส่ง","exerciseRunner.arduino.help.checklist.2.title":"เขียนโค้ดและกด [ตรวจสอบ]","exerciseRunner.arduino.help.checklist.3.body":"โปรแกรมของคุณจะถูกส่งไปยังบอร์ด Arduino ดูผลลัพธ์ในหน้าต่างซีเรียลด้านล่าง","exerciseRunner.arduino.help.checklist.3.title":"กด [อัปโหลด] เพื่อส่งไปยังบอร์ด","exerciseRunner.arduino.help.checklist.4.body":"การส่งจะตรวจให้คะแนนโค้ดของคุณโดยอัตโนมัติและแสดงคะแนน","exerciseRunner.arduino.help.checklist.4.title":"ถ้าใช้ได้ดี กด [ส่ง]!","exerciseRunner.arduino.help.close":"ปิด","exerciseRunner.arduino.help.dontShowAgain":"ไม่ต้องแสดงอีก","exerciseRunner.arduino.help.greeting":"เขียนโค้ดที่นี่เพื่อทำให้บอร์ด Arduino จริงทำงาน ทำตามขั้นตอนด้านล่างตามลำดับ","exerciseRunner.arduino.help.manual.detail":"ดูคู่มืออย่างเป็นทางการสำหรับรายละเอียดการใช้งาน","exerciseRunner.arduino.help.manual.title":"ต้องการคู่มือการใช้งาน?","exerciseRunner.arduino.help.title":"🤖 ยินดีต้อนรับสู่ห้องแล็บ Arduino!","exerciseRunner.arduino.terminal.board.notConnected":"/* Arduino ไม่ได้เชื่อมต่อ กรุณาเชื่อมต่อแล้วลองใหม่ */\n","exerciseRunner.arduino.terminal.compile.done":"/* คอมไพล์เสร็จสมบูรณ์ */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* อ่านไฟล์เฟิร์มแวร์ไม่สำเร็จ */\n","exerciseRunner.arduino.terminal.session.connected":"/* [เชื่อมต่อแล้ว] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [ตัดการเชื่อมต่อ] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [เชื่อมต่อใหม่] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* อัปโหลดเสร็จสมบูรณ์ */\n","exerciseRunner.arduino.terminal.upload.error":"/* เกิดข้อผิดพลาด: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"ไม่ทราบ","exerciseRunner.arduino.terminal.upload.progress":"/* กำลังอัปโหลด... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* เริ่มอัปโหลด */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* กำลังตรวจสอบ... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} เชื่อมต่อแล้ว","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"เชื่อมต่อบอร์ดแล้ว","exerciseRunner.controller.arduino.boardStatus.disconnected":"ตัดการเชื่อมต่อ","exerciseRunner.controller.arduino.boardStatus.idle":"ไม่ได้เชื่อมต่อบอร์ด Arduino","exerciseRunner.controller.arduino.boardStatus.reconnecting":"กำลังเชื่อมต่อใหม่","exerciseRunner.controller.arduino.button.compile":"คอมไพล์","exerciseRunner.controller.arduino.button.connect":"เชื่อมต่อ","exerciseRunner.controller.arduino.button.disconnect":"ตัดการเชื่อมต่อ","exerciseRunner.controller.arduino.button.upload":"อัปโหลด","exerciseRunner.controller.arduino.button.verify":"ตรวจสอบ","exerciseRunner.controller.buttonGroup.button.helpRequest":"ถามเกี่ยวกับโค้ดที่ลาก","exerciseRunner.controller.buttonGroup.button.run":"เรียกใช้งาน","exerciseRunner.controller.buttonGroup.button.stop":"หยุด","exerciseRunner.controller.buttonGroup.button.submit":"ส่ง","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"การฝึกอบรมนี้รองรับเฉพาะการรันเท่านั้น","exerciseRunner.controller.buttonGroup.button.syncRequest":"ซิงค์โค้ด","exerciseRunner.controller.runningInfo.error.fetch":"เกิดข้อผิดพลาดขณะดึงข้อมูลการทำงานใหม่","exerciseRunner.controller.runningInfo.lastRunningDatetime":"วันที่และเวลาที่ทำการเรียกใช้ครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"เวลาส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitScore":"คะแนนส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.score":"{score} คะแนน","exerciseRunner.controller.statusMessage.closed":"การเชื่อมต่อกับ Editor ถูกยกเลิก","exerciseRunner.controller.statusMessage.connecting":"กำลังเชื่อมต่อกับ Editor...","exerciseRunner.controller.statusMessage.open":"เชื่อมต่อกับ Editor สำเร็จ","exerciseRunner.controller.timer.runningRemainingTime":"เวลาที่เหลืออยู่: {remainingTime}","exerciseRunner.controller.tooltip.closed":"ขณะนี้การเชื่อมต่อกับเซิร์ฟเวอร์โค้ดไม่เสถียร การแก้ไขของคุณอาจไม่ถูกบันทึก\nกรุณาตรวจสอบเครือข่ายของคุณก่อนดำเนินการต่อ","exerciseRunner.submitErrorDialog.action.confirm":"ยืนยัน","exerciseRunner.submitErrorDialog.action.reload":"โหลดหน้าใหม่","exerciseRunner.submitErrorDialog.body.commonError":"เกิดข้อผิดพลาดขณะรันโค้ด\nโปรดรีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"คุณส่งเกินจำนวนที่กำหนด","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"สภาพแวดล้อมการฝึกอบรมหมดอายุ กรุณารีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.networkError":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารีเฟรชและลองอีกครั้ง\nหากยังมีปัญหา กรุณาตรวจสอบสภาพการเชื่อมต่ออินเทอร์เน็ต","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"การส่งผลงานสำหรับการฝึกอบรมนี้ไม่ถูกต้อง","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"สภาพแวดล้อมการฝึกอบรมกำลังถูกตั้งค่า กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.roomIsBusy":"มีการรันโค้ดอยู่ในขณะนี้ กรุณารอจนกว่าจะเสร็จสิ้น","exerciseRunner.submitErrorDialog.body.unknown":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.title":"ไม่สามารถรันโค้ดได้"};
 
 exports.default = th;

package/cjs/components/shared/monaco-editor/utils/prettier/config.d.ts

@@ -1,4 +1,4 @@
-import type { Config as PrettierConfig } from 'prettier';
+import type { Options as PrettierConfig } from 'prettier';
 interface PrettierConfigSource {
     config: PrettierConfig;
 }

package/cjs/components/shared/monaco-editor/utils/prettier/config.js

@@ -5,9 +5,9 @@
  */
 var DEFAULT_PRETTIER_CONFIG = Object.freeze({
   arrowParens: 'avoid',
+  bracketSameLine: false,
   bracketSpacing: true,
   endOfLine: 'auto',
-  jsxBracketSameLine: false,
   jsxSingleQuote: false,
   quoteProps: 'as-needed',
   semi: true,

package/cjs/hooks/index.d.ts

@@ -1,4 +1,3 @@
-export * from './useArduino';
 export * from './useExerciseFile';
 export * from './useExericseShortcut';
 export * from './useRunnerRoomWebSocket';

package/cjs/hooks/index.js

@@ -1,6 +1,5 @@
 'use strict';
 
-var useArduino = require('./useArduino.js');
 var useExerciseFile = require('./useExerciseFile.js');
 var useExericseShortcut = require('./useExericseShortcut.js');
 var useRunnerRoomWebSocket = require('./useRunnerRoomWebSocket.js');
@@ -10,7 +9,6 @@ var useUsercodeEditWebSocket = require('./useUsercodeEditWebSocket.js');
 
 
 
-exports.useArduino = useArduino.useArduino;
 exports.useExerciseFileEditable = useExerciseFile.useExerciseFileEditable;
 exports.useExerciseFileResettable = useExerciseFile.useExerciseFileResettable;
 exports.useExericseShortcut = useExericseShortcut.useExericseShortcut;

package/es/components/material-exercise/context/index.js

@@ -1,4 +1,4 @@
-export { exerciseActiveFilenameState, exerciseAibotInfoEnableState, exerciseArduinoAgentConnectionState, exerciseArduinoAgentModalState, exerciseArduinoOnSelectPortState, exerciseArduinoOpenedPortNameState, exerciseArduinoPortsState, exerciseArduinoPreferenceState, exerciseArduinoUploadProgressState, exerciseContainerSizeState, exerciseEditorPreferenceState, exerciseFileEditorCursorSelectionValueState, exerciseFileEditorCursorState, exerciseFileTabsOpenedState, exerciseFileTreeOpenedState, exerciseLectureState, exerciseMonacoEditorApisState, exerciseMultilangEnvironmentState, exerciseMultilangLanguagesState, exercisePreviewDisplayModeState, exercisePreviewTypeState, exerciseRightpaneActiveState, exerciseRoomState, exerciseRunnerRoomConnectionInfoState, exerciseRunnerRunTypeState, exerciseRunnerRunningState, exerciseRunnerStdioFilesState, exerciseRunnerSubmittingState, exerciseState, exerciseUserState, exerciseWebSocketTotalStatusQuery, exerciseWebsocketQuery, exerciseWebsocketStates } from './recoil.js';
+export { exerciseActiveFilenameState, exerciseAibotInfoEnableState, exerciseContainerSizeState, exerciseEditorPreferenceState, exerciseFileEditorCursorSelectionValueState, exerciseFileEditorCursorState, exerciseFileTabsOpenedState, exerciseFileTreeOpenedState, exerciseLectureState, exerciseMonacoEditorApisState, exerciseMultilangEnvironmentState, exerciseMultilangLanguagesState, exercisePreviewDisplayModeState, exercisePreviewTypeState, exerciseRightpaneActiveState, exerciseRoomState, exerciseRunnerRoomConnectionInfoState, exerciseRunnerRunTypeState, exerciseRunnerRunningState, exerciseRunnerStdioFilesState, exerciseRunnerSubmittingState, exerciseState, exerciseUserState, exerciseWebSocketTotalStatusQuery, exerciseWebsocketQuery, exerciseWebsocketStates } from './recoil.js';
 export { ExerciseContext } from './context.js';
 export { ExercisePreviewDisplayMode, ExercisePreviewType } from './recoilTypes.js';
 export { exerciseFileEditorContentChange$, exerciseFileEditorSaveAction$, exerciseFileEditorSyncRequestAction$, exerciseRunnerRoomsOpen$, exerciseRunnerTextSend$ } from './subjects.js';

package/es/components/material-exercise/context/recoil.d.ts

@@ -1,6 +1,5 @@
 import { ExercisePreviewDisplayMode, ExercisePreviewType } from './recoilTypes';
 import type { MonacoEditorApis } from "../../shared/monaco-editor";
-import type { ArduinoAgentConnectionStatus, ArduinoUploadProgressStatus } from "../../../typings/arduino";
 import type { AtomContainerSizeState, AtomExerciseRoomState, AtomExerciseState, AtomFileEditorCursorState, AtomLectureState, AtomMultilangEnvironmentJson, AtomMultilangEnvironmentState, AtomRunnerRoomConnectionInfoState, AtomRunnerRunTypeState, AtomRunnerStdioFilesState, AtomUserState, AtomVisibilityState, AtomWebSocketStateKey, AtomWebSocketStates } from './recoilTypes';
 /**
  * Lecture.
@@ -84,49 +83,6 @@ export declare const exerciseMultilangEnvironmentState: (param: {
     materialExerciseId: number;
     exerciseRoomId: number;
 }) => import("recoil").RecoilState<AtomMultilangEnvironmentJson>;
-/**
- * Arduino preference.
- */
-export declare const exerciseArduinoPreferenceState: import("recoil").RecoilState<Required<{
-    baudRate: number;
-    port: string;
-}>>;
-/**
- * Arduino ports.
- */
-export declare const exerciseArduinoPortsState: import("recoil").RecoilState<{
-    Name: string;
-    SerialNumber: string;
-    DeviceClass: string;
-    IsOpen: boolean;
-    IsPrimary: boolean;
-    Baud: number;
-    BufferAlgorithm: string;
-    Ver: string;
-    NetworkPort: boolean;
-    VendorID: string;
-    ProductID: string;
-}[]>;
-/**
- * Opened arduino port.
- */
-export declare const exerciseArduinoOpenedPortNameState: import("recoil").RecoilState<string | null>;
-/**
- * Arduino port open handler.
- */
-export declare const exerciseArduinoOnSelectPortState: import("recoil").RecoilState<(name: string) => void>;
-/**
- * Arduino agent connection status.
- */
-export declare const exerciseArduinoAgentConnectionState: import("recoil").RecoilState<ArduinoAgentConnectionStatus>;
-/**
- * Arduino upload progress.
- */
-export declare const exerciseArduinoUploadProgressState: import("recoil").RecoilState<ArduinoUploadProgressStatus>;
-/**
- * Arduino agent modal open status.
- */
-export declare const exerciseArduinoAgentModalState: import("recoil").RecoilState<boolean>;
 /**
  *
  */