@elice/material-exercise 1.260305.0 → 1.260430.0

package/es/components/material-exercise/exercise-runner/arduino/ArduinoProviderFlashWriter.js

@@ -0,0 +1,87 @@
+import React from 'react';
+import { useRawEliceIntl } from '@elice/intl';
+import { useFlash } from '@elice/mcu-bridge';
+import { useArduinoTerminalWriter } from './useArduinoTerminalWriter.js';
+
+//
+//
+//
+var UPLOAD_PROGRESS_THROTTLE_MS = 200;
+var ArduinoProviderFlashWriter = function ArduinoProviderFlashWriter(_ref) {
+  var xtermRef = _ref.xtermRef;
+  var intl = useRawEliceIntl();
+  var _useFlash = useFlash(),
+    progress = _useFlash.progress;
+  var _useArduinoTerminalWr = useArduinoTerminalWriter({
+      xtermRef: xtermRef
+    }),
+    writeSystemMessage = _useArduinoTerminalWr.writeSystemMessage;
+  var lastStageRef = React.useRef(null);
+  var lastUploadWriteAtRef = React.useRef(0);
+  //
+  // Translate flash progress into terminal messages.
+  //
+  React.useEffect(function () {
+    var _a, _b;
+    if (!progress) {
+      lastStageRef.current = null;
+      lastUploadWriteAtRef.current = 0;
+      return;
+    }
+    var stage = progress.stage,
+      percent = progress.percent;
+    var isStageChange = lastStageRef.current !== stage;
+    lastStageRef.current = stage;
+    switch (stage) {
+      case 'start':
+        writeSystemMessage(intl.formatMessage({
+          id: 'exerciseRunner.arduino.terminal.upload.start'
+        }));
+        return;
+      case 'upload':
+        {
+          var now = Date.now();
+          if (!isStageChange && now - lastUploadWriteAtRef.current < UPLOAD_PROGRESS_THROTTLE_MS) {
+            return;
+          }
+          lastUploadWriteAtRef.current = now;
+          writeSystemMessage(intl.formatMessage({
+            id: 'exerciseRunner.arduino.terminal.upload.progress'
+          }, {
+            percent: percent
+          }));
+          return;
+        }
+      case 'verify':
+        if (isStageChange) {
+          writeSystemMessage(intl.formatMessage({
+            id: 'exerciseRunner.arduino.terminal.upload.verifying'
+          }));
+        }
+        return;
+      case 'done':
+        if (isStageChange) {
+          writeSystemMessage(intl.formatMessage({
+            id: 'exerciseRunner.arduino.terminal.upload.done'
+          }));
+        }
+        return;
+      case 'error':
+        if (isStageChange) {
+          writeSystemMessage(intl.formatMessage({
+            id: 'exerciseRunner.arduino.terminal.upload.error'
+          }, {
+            error: (_b = (_a = progress.error) === null || _a === void 0 ? void 0 : _a.message) !== null && _b !== void 0 ? _b : intl.formatMessage({
+              id: 'exerciseRunner.arduino.terminal.upload.errorUnknown'
+            })
+          }));
+        }
+        return;
+      default:
+        return;
+    }
+  }, [progress, writeSystemMessage, intl]);
+  return null;
+};
+
+export { ArduinoProviderFlashWriter as default };

package/es/components/material-exercise/exercise-runner/arduino/ArduinoProviderSessionWriter.d.ts

@@ -0,0 +1,7 @@
+import React from 'react';
+import type { XtermApis } from "../../../shared/xterm/Xterm";
+export interface ArduinoProviderSessionWriterProps {
+    xtermRef: React.RefObject<XtermApis | null>;
+}
+declare const ArduinoProviderSessionWriter: React.FC<ArduinoProviderSessionWriterProps>;
+export default ArduinoProviderSessionWriter;

package/es/components/material-exercise/exercise-runner/arduino/ArduinoProviderSessionWriter.js

@@ -0,0 +1,62 @@
+import React from 'react';
+import { useRawEliceIntl } from '@elice/intl';
+import { useSession } from '@elice/mcu-bridge';
+import { useArduinoTerminalWriter } from './useArduinoTerminalWriter.js';
+
+//
+//
+//
+var ArduinoProviderSessionWriter = function ArduinoProviderSessionWriter(_ref) {
+  var xtermRef = _ref.xtermRef;
+  var intl = useRawEliceIntl();
+  var session = useSession();
+  var previousSessionRef = React.useRef(null);
+  var _useArduinoTerminalWr = useArduinoTerminalWriter({
+      xtermRef: xtermRef
+    }),
+    write = _useArduinoTerminalWr.write,
+    writeSystemMessage = _useArduinoTerminalWr.writeSystemMessage;
+  //
+  // Pipe board serial output into xterm.
+  //
+  React.useEffect(function () {
+    if (!session) {
+      return;
+    }
+    var decoder = new TextDecoder();
+    return session.events.on('serial', function (chunk) {
+      write(decoder.decode(chunk));
+    });
+  }, [session, write]);
+  //
+  // Print board attach/detach lifecycle messages.
+  //
+  React.useEffect(function () {
+    var previous = previousSessionRef.current;
+    previousSessionRef.current = session;
+    if (!previous && session) {
+      writeSystemMessage(intl.formatMessage({
+        id: 'exerciseRunner.arduino.terminal.session.connected'
+      }, {
+        device: session.driver.board.name
+      }));
+      return;
+    }
+    if (previous && !session) {
+      writeSystemMessage(intl.formatMessage({
+        id: 'exerciseRunner.arduino.terminal.session.disconnected'
+      }));
+      return;
+    }
+    if (previous && session && previous !== session) {
+      writeSystemMessage(intl.formatMessage({
+        id: 'exerciseRunner.arduino.terminal.session.reconnected'
+      }, {
+        device: session.driver.board.name
+      }));
+    }
+  }, [session, writeSystemMessage, intl]);
+  return null;
+};
+
+export { ArduinoProviderSessionWriter as default };

package/es/components/material-exercise/exercise-runner/arduino/_context.d.ts

@@ -0,0 +1,35 @@
+export type ArduinoBridgeIntent = 'compile' | 'upload';
+export type ArduinoConnectionIntent = 'connect' | 'upload';
+interface ArduinoBridgeContextValue {
+    /**
+     * Intent set by the Compile / Upload buttons just before the runner submit
+     * fires. The provider reads it when the compiled hex arrives over the stdio
+     * WebSocket to decide whether to flash.
+     */
+    setPendingIntent: (intent: ArduinoBridgeIntent) => void;
+    /**
+     * `true` between a Compile/Upload click and the arrival of the hex (or the
+     * flash terminating). Buttons gate themselves on this so a second click
+     * cannot overwrite the pending intent mid-round-trip.
+     */
+    isPending: boolean;
+    /** Readback for the button group to know when a flash is in flight. */
+    isFlashing: boolean;
+    /**
+     * Picks the connection-guide dialog's copy variant. The guide's open state
+     * is derived from `permissionStore.phase`; this only chooses the wording.
+     */
+    connectionIntent: ArduinoConnectionIntent | null;
+    setConnectionIntent: (intent: ArduinoConnectionIntent | null) => void;
+    /**
+     * Help dialog opened by the controller-area help button (and auto-opened
+     * once on first visit). Only the open flag lives here — the dialog owns
+     * its `wasAutoOpened` and `dontShowAgain` form state internally.
+     */
+    isHelpDialogOpen: boolean;
+    openHelpDialog: () => void;
+    closeHelpDialog: () => void;
+}
+export declare const ArduinoBridgeContext: import("react").Context<ArduinoBridgeContextValue | null>;
+export declare const useArduinoBridge: () => ArduinoBridgeContextValue;
+export {};

package/es/components/material-exercise/exercise-runner/arduino/_context.js

@@ -0,0 +1,15 @@
+import { createContext, useContext } from 'react';
+
+//
+//
+//
+var ArduinoBridgeContext = createContext(null);
+var useArduinoBridge = function useArduinoBridge() {
+  var ctx = useContext(ArduinoBridgeContext);
+  if (!ctx) {
+    throw new Error('useArduinoBridge must be used inside <ArduinoBridgeProvider>.');
+  }
+  return ctx;
+};
+
+export { ArduinoBridgeContext, useArduinoBridge };

package/es/components/material-exercise/exercise-runner/arduino/index.d.ts

@@ -0,0 +1,6 @@
+export { default as ArduinoBridgeProvider } from './ArduinoProvider';
+export { useArduinoBridge } from './_context';
+export { default as ArduinoControllerButtonGroup } from './ArduinoControllerButtonGroup';
+export { default as ArduinoControllerStatusMessage } from './ArduinoControllerStatusMessage';
+export type { ArduinoBridgeApi, ArduinoBridgeProviderProps } from './ArduinoProvider';
+export type { ArduinoBridgeIntent } from './_context';

package/es/components/material-exercise/exercise-runner/arduino/index.js

@@ -0,0 +1,4 @@
+export { default as ArduinoBridgeProvider } from './ArduinoProvider.js';
+export { useArduinoBridge } from './_context.js';
+export { default as ArduinoControllerButtonGroup } from './ArduinoControllerButtonGroup.js';
+export { default as ArduinoControllerStatusMessage } from './ArduinoControllerStatusMessage.js';

package/es/components/material-exercise/exercise-runner/arduino/useArduinoRunIntent.d.ts

@@ -0,0 +1,9 @@
+import React from 'react';
+import type { ArduinoBridgeIntent } from './_context';
+export interface UseArduinoRunIntentReturn {
+    pendingIntent: ArduinoBridgeIntent | null;
+    pendingIntentRef: React.MutableRefObject<ArduinoBridgeIntent | null>;
+    setRunIntent: (intent: ArduinoBridgeIntent) => void;
+    clearRunIntent: () => void;
+}
+export declare const useArduinoRunIntent: () => UseArduinoRunIntentReturn;

package/es/components/material-exercise/exercise-runner/arduino/useArduinoRunIntent.js

@@ -0,0 +1,32 @@
+import { slicedToArray as _slicedToArray } from '../../../../_virtual/_rollupPluginBabelHelpers.js';
+import React from 'react';
+
+//
+//
+//
+var useArduinoRunIntent = function useArduinoRunIntent() {
+  var _return = React.useRef({});
+  var _React$useState = React.useState(null),
+    _React$useState2 = _slicedToArray(_React$useState, 2),
+    pendingIntent = _React$useState2[0],
+    setPendingIntent = _React$useState2[1];
+  var pendingIntentRef = React.useRef(null);
+  var setRunIntent = React.useCallback(function (intent) {
+    pendingIntentRef.current = intent;
+    setPendingIntent(intent);
+  }, []);
+  var clearRunIntent = React.useCallback(function () {
+    pendingIntentRef.current = null;
+    setPendingIntent(null);
+  }, []);
+  //
+  //
+  //
+  _return.current.pendingIntent = pendingIntent;
+  _return.current.pendingIntentRef = pendingIntentRef;
+  _return.current.setRunIntent = setRunIntent;
+  _return.current.clearRunIntent = clearRunIntent;
+  return _return.current;
+};
+
+export { useArduinoRunIntent };

package/es/components/material-exercise/exercise-runner/arduino/useArduinoTerminalWriter.d.ts

@@ -0,0 +1,10 @@
+import React from 'react';
+import type { XtermApis } from "../../../shared/xterm/Xterm";
+export interface UseArduinoTerminalWriterParams {
+    xtermRef: React.RefObject<XtermApis | null>;
+}
+export interface UseArduinoTerminalWriterReturn {
+    write: (text: string) => void;
+    writeSystemMessage: (text: string) => void;
+}
+export declare const useArduinoTerminalWriter: ({ xtermRef }: UseArduinoTerminalWriterParams) => UseArduinoTerminalWriterReturn;

package/es/components/material-exercise/exercise-runner/arduino/useArduinoTerminalWriter.js

@@ -0,0 +1,27 @@
+import React from 'react';
+
+//
+//
+//
+var ANSI_WRAP = function ANSI_WRAP(text) {
+  return "\x1B[1m\x1B[38;5;221m".concat(text, "\x1B[0m");
+};
+var useArduinoTerminalWriter = function useArduinoTerminalWriter(_ref) {
+  var xtermRef = _ref.xtermRef;
+  var _return = React.useRef({});
+  var write = React.useCallback(function (text) {
+    var _a;
+    (_a = xtermRef.current) === null || _a === void 0 ? void 0 : _a.write(text);
+  }, [xtermRef]);
+  var writeSystemMessage = React.useCallback(function (text) {
+    write(ANSI_WRAP(text));
+  }, [write]);
+  //
+  //
+  //
+  _return.current.write = write;
+  _return.current.writeSystemMessage = writeSystemMessage;
+  return _return.current;
+};
+
+export { useArduinoTerminalWriter };

package/es/components/material-exercise/exercise-runner/locales/en.json.js

@@ -1,3 +1,3 @@
-var messageEn = {"exerciseRunner.controller.arduino.connectionStatus.connected":"Connected to Arduino","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"Connected to {device}","exerciseRunner.controller.arduino.connectionStatus.connecting":"Connecting to Elice Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.disconnected":"Disconnected from Elice Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.noDevice":"No connected device","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"Connecting to Elice Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.uploading":"Uploading...","exerciseRunner.controller.arduino.agent.title":"Connect to Agent","exerciseRunner.controller.arduino.agent.instruction.install":"1. Install Elice arduino agent","exerciseRunner.controller.arduino.agent.instruction.install.detail":"Install 'elice-arduino-agent' program to connect to arduino.","exerciseRunner.controller.arduino.agent.instruction.install.window":"Download for Windows","exerciseRunner.controller.arduino.agent.instruction.install.mac":"Download for MacOS","exerciseRunner.controller.arduino.agent.instruction.connect":"2. Connect to arduino","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"After the download is completed, it should be connected to exercise environment. If connection is unavailable, please follow the manual.\nClick the button below to read the manual.","exerciseRunner.controller.arduino.agent.instruction.connect.button":"Go to Manual","exerciseRunner.controller.arduino.agent.instruction.close":"Close","exerciseRunner.controller.buttonGroup.button.compile":"Compile","exerciseRunner.controller.buttonGroup.button.helpRequest":"Ask about the dragged code","exerciseRunner.controller.buttonGroup.button.run":"Run","exerciseRunner.controller.buttonGroup.button.stop":"Stop","exerciseRunner.controller.buttonGroup.button.submit":"Submit","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"Exercise without submission","exerciseRunner.controller.buttonGroup.button.syncRequest":"Sync code","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"Ask any questions you may have.","exerciseRunner.controller.runningInfo.error.fetch":"An error occurred while fetching running info","exerciseRunner.controller.runningInfo.lastRunningDatetime":"Last running datetime","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"Last submit datetime","exerciseRunner.controller.runningInfo.lastSubmitScore":"Last submit score","exerciseRunner.controller.runningInfo.score":"{score}","exerciseRunner.controller.statusMessage.closed":"Editor disconnected","exerciseRunner.controller.statusMessage.connecting":"Connecting to editor...","exerciseRunner.controller.statusMessage.open":"Editor connected","exerciseRunner.controller.tooltip.closed":"The connection to the code server is currently unstable, so your edits may not be saved.\nPlease check your network and try again.","exerciseRunner.controller.timer.runningRemainingTime":"Remaining: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"Reload page","exerciseRunner.submitErrorDialog.body.commonError":"An error occurred while running the code.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"You have exceeded the allowed number of lab submissions.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"The exercise image has been updated.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.networkError":"An error occurred while running the code.\nPlease refresh and try again.\nIf the problem persists, please check the network status.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"This exercise is not allowed to be submitted.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"The exercise room is being prepared.\nPlease try again later.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"The exercise room is running.\nPlease wait a moment.","exerciseRunner.submitErrorDialog.body.unknown":"An error occurred while running the code.\nPlease try again later.","exerciseRunner.submitErrorDialog.title":"Unable to run the code"};
+var messageEn = {"exerciseRunner.arduino.error.close":"Close","exerciseRunner.arduino.error.title":"Arduino connection error","exerciseRunner.arduino.help.button":"Help","exerciseRunner.arduino.help.title":"🤖 Welcome to the Arduino Lab!","exerciseRunner.arduino.help.greeting":"Write code in here to make a real Arduino board do things. Follow the steps below in order.","exerciseRunner.arduino.help.checklist.1.title":"Plug your Arduino board into the computer","exerciseRunner.arduino.help.checklist.1.body":"Connect the board with a USB cable, then click the [Connect] button next to the menu.","exerciseRunner.arduino.help.checklist.2.title":"Write code and press [Verify]","exerciseRunner.arduino.help.checklist.2.body":"Verify checks your code for problems before sending it.","exerciseRunner.arduino.help.checklist.3.title":"Press [Upload] to send it to the board","exerciseRunner.arduino.help.checklist.3.body":"Your program is sent to the Arduino board. Watch the serial window below for the results.","exerciseRunner.arduino.help.checklist.4.title":"If it works, press [Submit]!","exerciseRunner.arduino.help.checklist.4.body":"Submitting grades your code automatically and shows your score.","exerciseRunner.arduino.help.manual.title":"Need a usage guide?","exerciseRunner.arduino.help.manual.detail":"See the official manual for usage details.","exerciseRunner.arduino.help.dontShowAgain":"Don't show again","exerciseRunner.arduino.help.close":"Close","exerciseRunner.arduino.connectGuide.body":"For security, the browser shows the board picker directly. Find the small window under the address bar at the top-left of the screen and pick your Arduino board.","exerciseRunner.arduino.connectGuide.footer":"Don't see the window? Check the lock icon next to the address bar.","exerciseRunner.arduino.connectGuide.preview.cancel":"Cancel","exerciseRunner.arduino.connectGuide.preview.connect":"Connect","exerciseRunner.arduino.connectGuide.preview.host":"{host} wants to connect to a serial port","exerciseRunner.arduino.connectGuide.preview.label":"It will look like this","exerciseRunner.arduino.connectGuide.steps.1":"Click the entry whose name starts with {usbmodem} or {usbserial}.","exerciseRunner.arduino.connectGuide.steps.2":"Press the {connect} button at the bottom right to connect.","exerciseRunner.arduino.connectGuide.steps.3":"If you click {cancel} by mistake, you can try again.","exerciseRunner.arduino.connectGuide.title.connect":"Select your board in the browser","exerciseRunner.arduino.connectGuide.title.upload":"Let's connect the board first","exerciseRunner.arduino.connectGuide.upload.note":"Connecting the board is required to upload. Once connected, the upload will start automatically.","exerciseRunner.arduino.terminal.board.notConnected":"/* Arduino is not connected. Please connect and try again. */\n","exerciseRunner.arduino.terminal.compile.done":"/* Compile complete. */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* Failed to read the firmware file. */\n","exerciseRunner.arduino.terminal.session.connected":"/* [connected] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [disconnected] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [reconnected] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* Upload complete. */\n","exerciseRunner.arduino.terminal.upload.error":"/* Error: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"Unknown","exerciseRunner.arduino.terminal.upload.progress":"/* Uploading... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* Starting upload. */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* Verifying... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} connected","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"Board connected","exerciseRunner.controller.arduino.boardStatus.disconnected":"Disconnected","exerciseRunner.controller.arduino.boardStatus.idle":"Arduino board not connected","exerciseRunner.controller.arduino.boardStatus.reconnecting":"Reconnecting","exerciseRunner.controller.arduino.button.compile":"Compile","exerciseRunner.controller.arduino.button.connect":"Connect","exerciseRunner.controller.arduino.button.disconnect":"Disconnect","exerciseRunner.controller.arduino.button.upload":"Upload","exerciseRunner.controller.arduino.button.verify":"Verify","exerciseRunner.controller.buttonGroup.button.helpRequest":"Ask about the dragged code","exerciseRunner.controller.buttonGroup.button.run":"Run","exerciseRunner.controller.buttonGroup.button.stop":"Stop","exerciseRunner.controller.buttonGroup.button.submit":"Submit","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"Exercise without submission","exerciseRunner.controller.buttonGroup.button.syncRequest":"Sync code","exerciseRunner.controller.runningInfo.error.fetch":"An error occurred while fetching running info","exerciseRunner.controller.runningInfo.lastRunningDatetime":"Last running datetime","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"Last submit datetime","exerciseRunner.controller.runningInfo.lastSubmitScore":"Last submit score","exerciseRunner.controller.runningInfo.score":"{score}","exerciseRunner.controller.statusMessage.closed":"Editor disconnected","exerciseRunner.controller.statusMessage.connecting":"Connecting to editor...","exerciseRunner.controller.statusMessage.open":"Editor connected","exerciseRunner.controller.timer.runningRemainingTime":"Remaining: {remainingTime}","exerciseRunner.controller.tooltip.closed":"The connection to the code server is currently unstable, so your edits may not be saved.\nPlease check your network and try again.","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"Reload page","exerciseRunner.submitErrorDialog.body.commonError":"An error occurred while running the code.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"You have exceeded the allowed number of lab submissions.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"The exercise image has been updated.\nPlease refresh and try again.","exerciseRunner.submitErrorDialog.body.networkError":"An error occurred while running the code.\nPlease refresh and try again.\nIf the problem persists, please check the network status.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"This exercise is not allowed to be submitted.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"The exercise room is being prepared.\nPlease try again later.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"The exercise room is running.\nPlease wait a moment.","exerciseRunner.submitErrorDialog.body.unknown":"An error occurred while running the code.\nPlease try again later.","exerciseRunner.submitErrorDialog.title":"Unable to run the code"};
 
 export { messageEn as default };

package/es/components/material-exercise/exercise-runner/locales/ja.json.js

@@ -1,3 +1,3 @@
-var ja = {"exerciseRunner.controller.arduino.connectionStatus.connected":"Arduinoに接続されました","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"{device}に接続されました","exerciseRunner.controller.arduino.connectionStatus.connecting":"Elice Arduino エージェントに接続中","exerciseRunner.controller.arduino.connectionStatus.disconnected":"Elice Arduino エージェントから切断されました","exerciseRunner.controller.arduino.connectionStatus.noDevice":"接続されたデバイスはありません。","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"Elice Arduino エージェントに接続中","exerciseRunner.controller.arduino.connectionStatus.uploading":"アップロード中...","exerciseRunner.controller.arduino.agent.title":"エージェントに接続します","exerciseRunner.controller.arduino.agent.instruction.install":"1. Elice Arduino エージェントをインストールします。","exerciseRunner.controller.arduino.agent.instruction.install.detail":"'elice-arduino-agent' プログラムをインストールして Arduino に接続してください。","exerciseRunner.controller.arduino.agent.instruction.install.window":"Windows用のダウンロード","exerciseRunner.controller.arduino.agent.instruction.install.mac":"MacOS用のダウンロード","exerciseRunner.controller.arduino.agent.instruction.connect":"2. Arduinoに接続します。","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"ダウンロードが完了したら、運動環境に接続する必要があります。接続できない場合は、マニュアルに従ってください。\nマニュアルを読むために下のボタンをクリックしてください。","exerciseRunner.controller.arduino.agent.instruction.connect.button":"マニュアルを参照してください。","exerciseRunner.controller.arduino.agent.instruction.close":"閉じる","exerciseRunner.controller.buttonGroup.button.compile":"コンパイル","exerciseRunner.controller.buttonGroup.button.helpRequest":"ドラッグしたコードの質問","exerciseRunner.controller.buttonGroup.button.run":"ラン","exerciseRunner.controller.buttonGroup.button.stop":"停止","exerciseRunner.controller.buttonGroup.button.submit":"提出","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"提出なしの運動","exerciseRunner.controller.buttonGroup.button.syncRequest":"コードを同期します","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"どんな質問がありますか。","exerciseRunner.controller.runningInfo.error.fetch":"ランニング情報を取得中にエラーが発生しました。","exerciseRunner.controller.runningInfo.lastRunningDatetime":"最終実行日時","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"最終送信日時","exerciseRunner.controller.runningInfo.lastSubmitScore":"最後に提出したスコア","exerciseRunner.controller.runningInfo.score":"{得点}","exerciseRunner.controller.statusMessage.closed":"エディタが切断されました。","exerciseRunner.controller.statusMessage.connecting":"エディタへの接続中...","exerciseRunner.controller.statusMessage.open":"エディターが接続されました","exerciseRunner.controller.tooltip.closed":"現在、コードサーバーとの接続が不安定なため、編集内容が反映されない可能性があります。\nネットワークの状態を確認してから作業を続けてください。","exerciseRunner.controller.timer.runningRemainingTime":"残り時間: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"ページをリロードしてください。","exerciseRunner.submitErrorDialog.body.commonError":"コードを実行中にエラーが発生しました。\nページを更新してもう一度お試しください。","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"許可された実験提出回数を超えています。","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"エクササイズ画像が更新されました。\nもう一度更新してやり直してください。","exerciseRunner.submitErrorDialog.body.networkError":"コードを実行中にエラーが発生しました。\nページを更新して、もう一度お試しください。\n問題が解決しない場合は、ネットワークの状態を確認してください。","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"この演習は提出してはいけません。","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"エクササイズルームは準備中です。\n後で再試行してください。","exerciseRunner.submitErrorDialog.body.roomIsBusy":"運動室は稼働しています。\n少々お待ちください。","exerciseRunner.submitErrorDialog.body.unknown":"コードの実行中にエラーが発生しました。\n後でもう一度お試しください。","exerciseRunner.submitErrorDialog.title":"コードを実行できません。"};
+var ja = {"exerciseRunner.arduino.connectGuide.body":"セキュリティのため、ブラウザがボード選択ウィンドウを直接表示します。画面左上のアドレスバー下に表示される小さなウィンドウから Arduino ボードを選択してください。","exerciseRunner.arduino.connectGuide.footer":"ウィンドウが表示されない場合は、アドレスバーの鍵アイコンを確認してください。","exerciseRunner.arduino.connectGuide.preview.cancel":"キャンセル","exerciseRunner.arduino.connectGuide.preview.connect":"接続","exerciseRunner.arduino.connectGuide.preview.host":"{host} がシリアルポートに接続しようとしています","exerciseRunner.arduino.connectGuide.preview.label":"このようなウィンドウが表示されます","exerciseRunner.arduino.connectGuide.steps.1":"{usbmodem} または {usbserial} で始まる名前の項目をクリックしてください。","exerciseRunner.arduino.connectGuide.steps.2":"右下の {connect} ボタンを押すと接続されます。","exerciseRunner.arduino.connectGuide.steps.3":"誤って {cancel} を押した場合は、もう一度試すことができます。","exerciseRunner.arduino.connectGuide.title.connect":"ブラウザでボードを選択してください","exerciseRunner.arduino.connectGuide.title.upload":"まずボードを接続します","exerciseRunner.arduino.connectGuide.upload.note":"アップロードにはボードの接続が必要です。接続が完了するとすぐにアップロードが始まります。","exerciseRunner.arduino.error.close":"閉じる","exerciseRunner.arduino.error.title":"Arduino 接続エラー","exerciseRunner.arduino.help.button":"ヘルプ","exerciseRunner.arduino.help.checklist.1.body":"USB ケーブルでボードをコンピュータに接続し、メニューの隣にある [接続] ボタンをクリックしてください。","exerciseRunner.arduino.help.checklist.1.title":"Arduino ボードをコンピュータに接続します","exerciseRunner.arduino.help.checklist.2.body":"確認では、送信前にコードに問題がないかチェックします。","exerciseRunner.arduino.help.checklist.2.title":"コードを書いて [確認] を押します","exerciseRunner.arduino.help.checklist.3.body":"Arduino ボードに作成したプログラムが送信されます。下のシリアルウィンドウで結果を確認できます。","exerciseRunner.arduino.help.checklist.3.title":"[アップロード] でボードに送信します","exerciseRunner.arduino.help.checklist.4.body":"提出すると自動的に採点され、点数が表示されます。","exerciseRunner.arduino.help.checklist.4.title":"うまく動いたら [提出]！","exerciseRunner.arduino.help.close":"閉じる","exerciseRunner.arduino.help.dontShowAgain":"次回から表示しない","exerciseRunner.arduino.help.greeting":"ここにコードを書いて、本物の Arduino ボードを動かしてみましょう。下の手順を順番に進めてください。","exerciseRunner.arduino.help.manual.detail":"公式マニュアルで詳しい使い方を確認できます。","exerciseRunner.arduino.help.manual.title":"使い方を知りたいですか？","exerciseRunner.arduino.help.title":"🤖 Arduino ラボへようこそ！","exerciseRunner.arduino.terminal.board.notConnected":"/* Arduino が接続されていません。接続後もう一度お試しください。 */\n","exerciseRunner.arduino.terminal.compile.done":"/* コンパイルが完了しました。 */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* ファームウェアファイルを読み取れませんでした。 */\n","exerciseRunner.arduino.terminal.session.connected":"/* [接続] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [切断] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [再接続] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* アップロードが完了しました。 */\n","exerciseRunner.arduino.terminal.upload.error":"/* エラーが発生しました: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"不明","exerciseRunner.arduino.terminal.upload.progress":"/* アップロード中... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* アップロードを開始します。 */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* 確認中... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} 接続済み","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"ボード接続済み","exerciseRunner.controller.arduino.boardStatus.disconnected":"切断","exerciseRunner.controller.arduino.boardStatus.idle":"Arduino ボード未接続","exerciseRunner.controller.arduino.boardStatus.reconnecting":"再接続中","exerciseRunner.controller.arduino.button.compile":"コンパイル","exerciseRunner.controller.arduino.button.connect":"接続","exerciseRunner.controller.arduino.button.disconnect":"切断","exerciseRunner.controller.arduino.button.upload":"アップロード","exerciseRunner.controller.arduino.button.verify":"確認","exerciseRunner.controller.buttonGroup.button.helpRequest":"ドラッグしたコードの質問","exerciseRunner.controller.buttonGroup.button.run":"ラン","exerciseRunner.controller.buttonGroup.button.stop":"停止","exerciseRunner.controller.buttonGroup.button.submit":"提出","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"提出なしの運動","exerciseRunner.controller.buttonGroup.button.syncRequest":"コードを同期します","exerciseRunner.controller.runningInfo.error.fetch":"ランニング情報を取得中にエラーが発生しました。","exerciseRunner.controller.runningInfo.lastRunningDatetime":"最終実行日時","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"最終送信日時","exerciseRunner.controller.runningInfo.lastSubmitScore":"最後に提出したスコア","exerciseRunner.controller.runningInfo.score":"{score} 点","exerciseRunner.controller.statusMessage.closed":"エディタが切断されました。","exerciseRunner.controller.statusMessage.connecting":"エディタへの接続中...","exerciseRunner.controller.statusMessage.open":"エディターが接続されました","exerciseRunner.controller.timer.runningRemainingTime":"残り時間: {remainingTime}","exerciseRunner.controller.tooltip.closed":"現在、コードサーバーとの接続が不安定なため、編集内容が反映されない可能性があります。\nネットワークの状態を確認してから作業を続けてください。","exerciseRunner.submitErrorDialog.action.confirm":"OK","exerciseRunner.submitErrorDialog.action.reload":"ページをリロードしてください。","exerciseRunner.submitErrorDialog.body.commonError":"コードを実行中にエラーが発生しました。\nページを更新してもう一度お試しください。","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"許可された実験提出回数を超えています。","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"エクササイズ画像が更新されました。\nもう一度更新してやり直してください。","exerciseRunner.submitErrorDialog.body.networkError":"コードを実行中にエラーが発生しました。\nページを更新して、もう一度お試しください。\n問題が解決しない場合は、ネットワークの状態を確認してください。","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"この演習は提出してはいけません。","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"エクササイズルームは準備中です。\n後で再試行してください。","exerciseRunner.submitErrorDialog.body.roomIsBusy":"運動室は稼働しています。\n少々お待ちください。","exerciseRunner.submitErrorDialog.body.unknown":"コードの実行中にエラーが発生しました。\n後でもう一度お試しください。","exerciseRunner.submitErrorDialog.title":"コードを実行できません。"};
 
 export { ja as default };

package/es/components/material-exercise/exercise-runner/locales/ko.json.js

@@ -1,3 +1,3 @@
-var messageKo = {"exerciseRunner.controller.arduino.connectionStatus.connected":"아두이노 기기 연결됨","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"{device} 연결됨","exerciseRunner.controller.arduino.connectionStatus.connecting":"엘리스 아두이노 에이전트 연결 중","exerciseRunner.controller.arduino.connectionStatus.disconnected":"엘리스 아두이노 에이전트 연결 끊김","exerciseRunner.controller.arduino.connectionStatus.noDevice":"연결된 기기 없음","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"엘리스 아두이노 에이전트 연결 중","exerciseRunner.controller.arduino.connectionStatus.uploading":"업로드 중","exerciseRunner.controller.arduino.agent.title":"에이전트 연결","exerciseRunner.controller.arduino.agent.instruction.install":"1. 엘리스 아두이노 에이전트 설치하기","exerciseRunner.controller.arduino.agent.instruction.install.detail":"아두이노와 연결하기 위해 ‘엘리스 아두이노 에이전트'를 설치해주세요.","exerciseRunner.controller.arduino.agent.instruction.install.window":"Windows 용 설치","exerciseRunner.controller.arduino.agent.instruction.install.mac":"MacOS 용 설치","exerciseRunner.controller.arduino.agent.instruction.connect":"2. 연결하기","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"다운로드를 완료하였다면 실습 환경과 연결이 필요합니다. 연결되지 않을 경우 매뉴얼을 확인하세요.\n아래 버튼을 클릭해 매뉴얼을 확인하실 수 있습니다.","exerciseRunner.controller.arduino.agent.instruction.connect.button":"매뉴얼 이동","exerciseRunner.controller.arduino.agent.instruction.close":"닫기","exerciseRunner.controller.buttonGroup.button.compile":"컴파일","exerciseRunner.controller.buttonGroup.button.helpRequest":"드래그한 코드 질문","exerciseRunner.controller.buttonGroup.button.run":"실행","exerciseRunner.controller.buttonGroup.button.stop":"정지","exerciseRunner.controller.buttonGroup.button.submit":"제출","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"실행만 가능한 실습입니다.","exerciseRunner.controller.buttonGroup.button.syncRequest":"코드 동기화","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"궁금한 사항을 질문해 보세요.","exerciseRunner.controller.runningInfo.error.fetch":"최종 실행 내역을 가져오는데 문제가 발생하였습니다.","exerciseRunner.controller.runningInfo.lastRunningDatetime":"최종 실행 시간","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"최종 제출 시간","exerciseRunner.controller.runningInfo.lastSubmitScore":"최종 제출 점수","exerciseRunner.controller.runningInfo.score":"{score} 점","exerciseRunner.controller.statusMessage.closed":"에디터 연결 끊김","exerciseRunner.controller.statusMessage.connecting":"에디터 연결 중...","exerciseRunner.controller.statusMessage.open":"에디터 연결됨","exerciseRunner.controller.tooltip.closed":"현재 코드 서버와 네트워크 연결 상태가 불안정하여 편집 내용이 반영되지 않습니다.\n네트워크 상태를 확인하여 코드 작성을 진행해주세요.","exerciseRunner.controller.timer.runningRemainingTime":"실행 제한시간: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"확인","exerciseRunner.submitErrorDialog.action.reload":"새로고침","exerciseRunner.submitErrorDialog.body.commonError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"실습 제출 허용 횟수를 초과했습니다.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"실습환경이 업데이트 되었습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.networkError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.\n문제가 계속되면 네트워크 상태를 확인해주세요.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"제출이 허용되지 않은 실습입니다.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"실습환경이 준비 중입니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"실습을 실행하고 있습니다.\n잠시만 기다려 주세요.","exerciseRunner.submitErrorDialog.body.unknown":"코드 실행 중 오류가 발생했습니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.title":"실습을 실행할 수 없습니다"};
+var messageKo = {"exerciseRunner.arduino.error.close":"닫기","exerciseRunner.arduino.error.title":"아두이노 연결 오류","exerciseRunner.arduino.help.button":"도움말","exerciseRunner.arduino.help.title":"🤖 아두이노 실습실에 오신 걸 환영해요!","exerciseRunner.arduino.help.greeting":"이 실습실에서는 코드를 작성해서 진짜 아두이노 보드를 움직여볼 수 있어요. 아래 단계를 차례로 따라해보세요.","exerciseRunner.arduino.help.checklist.1.title":"아두이노 보드를 컴퓨터에 연결해요","exerciseRunner.arduino.help.checklist.1.body":"USB 케이블로 보드를 컴퓨터에 꽂은 뒤, 메뉴 옆 [연결하기] 버튼을 누르세요.","exerciseRunner.arduino.help.checklist.2.title":"코드를 작성하고 [확인]을 눌러요","exerciseRunner.arduino.help.checklist.2.body":"확인 버튼은 코드에 문제가 없는지 검사해줘요.","exerciseRunner.arduino.help.checklist.3.title":"[업로드]로 보드에 전송해요","exerciseRunner.arduino.help.checklist.3.body":"아두이노 보드에 작성한 프로그램을 보내요. 아래 시리얼 창에서 결과를 볼 수 있어요.","exerciseRunner.arduino.help.checklist.4.title":"잘 동작하면 [제출]!","exerciseRunner.arduino.help.checklist.4.body":"제출하면 자동으로 채점이 되고 점수를 알려줘요.","exerciseRunner.arduino.help.manual.title":"사용 방법이 궁금하신가요?","exerciseRunner.arduino.help.manual.detail":"공식 매뉴얼에서 자세한 사용법을 확인할 수 있어요.","exerciseRunner.arduino.help.dontShowAgain":"다시 보지 않기","exerciseRunner.arduino.help.close":"닫기","exerciseRunner.arduino.connectGuide.body":"보안을 위해 브라우저가 직접 보드 선택 창을 띄워요. 화면 왼쪽 위 주소창 아래에 나타나는 작은 창에서 내 아두이노 보드를 골라주세요.","exerciseRunner.arduino.connectGuide.footer":"창이 안 보이면 주소창 옆 자물쇠 아이콘을 확인해보세요","exerciseRunner.arduino.connectGuide.preview.cancel":"취소","exerciseRunner.arduino.connectGuide.preview.connect":"연결","exerciseRunner.arduino.connectGuide.preview.host":"{host}에서 시리얼 포트에 연결하려고 합니다.","exerciseRunner.arduino.connectGuide.preview.label":"이렇게 생긴 창이 떠요","exerciseRunner.arduino.connectGuide.steps.1":"이름이 {usbmodem} 또는 {usbserial}로 시작하는 항목을 클릭하세요.","exerciseRunner.arduino.connectGuide.steps.2":"오른쪽 아래 {connect} 버튼을 누르면 연결돼요.","exerciseRunner.arduino.connectGuide.steps.3":"실수로 {cancel}을 눌러도 다시 시도할 수 있어요.","exerciseRunner.arduino.connectGuide.title.connect":"브라우저에서 보드 선택해주세요","exerciseRunner.arduino.connectGuide.title.upload":"보드를 먼저 연결할게요","exerciseRunner.arduino.connectGuide.upload.note":"업로드를 위해 보드 연결이 필요해요. 연결이 끝나면 바로 업로드가 시작돼요.","exerciseRunner.arduino.terminal.board.notConnected":"/* 아두이노가 연결되어 있지 않습니다. 연결 후 다시 시도해 주세요. */\n","exerciseRunner.arduino.terminal.compile.done":"/* 컴파일이 완료되었습니다. */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* 펌웨어 파일을 읽지 못했습니다. */\n","exerciseRunner.arduino.terminal.session.connected":"/* [연결됨] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [연결 끊김] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [재연결] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* 업로드가 완료되었습니다. */\n","exerciseRunner.arduino.terminal.upload.error":"/* 에러가 발생했습니다: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"알 수 없음","exerciseRunner.arduino.terminal.upload.progress":"/* 업로드 중입니다... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* 업로드를 시작합니다. */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* 확인 중입니다... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} 연결됨","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"보드 연결됨","exerciseRunner.controller.arduino.boardStatus.disconnected":"연결 끊김","exerciseRunner.controller.arduino.boardStatus.idle":"아두이노 보드 연결 안 됨","exerciseRunner.controller.arduino.boardStatus.reconnecting":"재연결 중","exerciseRunner.controller.arduino.button.compile":"컴파일(확인)","exerciseRunner.controller.arduino.button.connect":"연결하기","exerciseRunner.controller.arduino.button.disconnect":"연결 해제","exerciseRunner.controller.arduino.button.upload":"업로드","exerciseRunner.controller.arduino.button.verify":"확인","exerciseRunner.controller.buttonGroup.button.helpRequest":"드래그한 코드 질문","exerciseRunner.controller.buttonGroup.button.run":"실행","exerciseRunner.controller.buttonGroup.button.stop":"정지","exerciseRunner.controller.buttonGroup.button.submit":"제출","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"실행만 가능한 실습입니다.","exerciseRunner.controller.buttonGroup.button.syncRequest":"코드 동기화","exerciseRunner.controller.runningInfo.error.fetch":"최종 실행 내역을 가져오는데 문제가 발생하였습니다.","exerciseRunner.controller.runningInfo.lastRunningDatetime":"최종 실행 시간","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"최종 제출 시간","exerciseRunner.controller.runningInfo.lastSubmitScore":"최종 제출 점수","exerciseRunner.controller.runningInfo.score":"{score} 점","exerciseRunner.controller.statusMessage.closed":"에디터 연결 끊김","exerciseRunner.controller.statusMessage.connecting":"에디터 연결 중...","exerciseRunner.controller.statusMessage.open":"에디터 연결됨","exerciseRunner.controller.timer.runningRemainingTime":"실행 제한시간: {remainingTime}","exerciseRunner.controller.tooltip.closed":"현재 코드 서버와 네트워크 연결 상태가 불안정하여 편집 내용이 반영되지 않습니다.\n네트워크 상태를 확인하여 코드 작성을 진행해주세요.","exerciseRunner.submitErrorDialog.action.confirm":"확인","exerciseRunner.submitErrorDialog.action.reload":"새로고침","exerciseRunner.submitErrorDialog.body.commonError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"실습 제출 허용 횟수를 초과했습니다.","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"실습환경이 업데이트 되었습니다.\n새로고침 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.networkError":"코드 실행 중 오류가 발생했습니다.\n새로고침 후 다시 시도해주세요.\n문제가 계속되면 네트워크 상태를 확인해주세요.","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"제출이 허용되지 않은 실습입니다.","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"실습환경이 준비 중입니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.body.roomIsBusy":"실습을 실행하고 있습니다.\n잠시만 기다려 주세요.","exerciseRunner.submitErrorDialog.body.unknown":"코드 실행 중 오류가 발생했습니다.\n잠시 후 다시 시도해주세요.","exerciseRunner.submitErrorDialog.title":"실습을 실행할 수 없습니다"};
 
 export { messageKo as default };

package/es/components/material-exercise/exercise-runner/locales/th.json.js

@@ -1,3 +1,3 @@
-var th = {"exerciseRunner.controller.arduino.connectionStatus.connected":"เชื่อมต่อกับ Arduino แล้ว","exerciseRunner.controller.arduino.connectionStatus.connectedDevice":"เชื่อมต่อกับ {device}","exerciseRunner.controller.arduino.connectionStatus.connecting":"กำลังเชื่อมต่อกับ Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.disconnected":"ตัดการเชื่อมต่อกับ Arduino Agent","exerciseRunner.controller.arduino.connectionStatus.noDevice":"ไม่พบอุปกรณ์ที่เชื่อมต่อ","exerciseRunner.controller.arduino.connectionStatus.reconnecting":"กำลังเชื่อมต่อกับ Arduino Agent ใหม่","exerciseRunner.controller.arduino.connectionStatus.uploading":"กำลังอัปโหลด...","exerciseRunner.controller.arduino.agent.title":"เชื่อมต่อ Agent","exerciseRunner.controller.arduino.agent.instruction.install":"1. ติดตั้ง Arduino Agent","exerciseRunner.controller.arduino.agent.instruction.install.detail":"ติดตั้งโปรแกรม 'elice-arduino-agent' เพื่อเชื่อมต่อกับ Arduino ค่ะ.","exerciseRunner.controller.arduino.agent.instruction.install.window":"ดาวน์โหลดสำหรับ Windows","exerciseRunner.controller.arduino.agent.instruction.install.mac":"ดาวน์โหลดสำหรับ MacOS","exerciseRunner.controller.arduino.agent.instruction.connect":"2. เชื่อมต่อกับ Arduino","exerciseRunner.controller.arduino.agent.instruction.connect.detail":"หลังจากการดาวน์โหลดเสร็จสิ้นแล้ว ควรเชื่อมต่อกับสภาพแวดล้อมการฝึกหัด หากไม่สามารถเชื่อมต่อได้ โปรดทำตามคู่มือ\nคลิกที่ปุ่มด้านล่างเพื่ออ่านคู่มือ","exerciseRunner.controller.arduino.agent.instruction.connect.button":"ไปที่คู่มือ","exerciseRunner.controller.arduino.agent.instruction.close":"ปิด","exerciseRunner.controller.buttonGroup.button.compile":"คอมไพล์","exerciseRunner.controller.buttonGroup.button.helpRequest":"ถามเกี่ยวกับโค้ดที่ลาก","exerciseRunner.controller.buttonGroup.button.run":"เรียกใช้งาน","exerciseRunner.controller.buttonGroup.button.stop":"หยุด","exerciseRunner.controller.buttonGroup.button.submit":"ส่ง","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"การฝึกอบรมนี้รองรับเฉพาะการรันเท่านั้น","exerciseRunner.controller.buttonGroup.button.syncRequest":"ซิงค์โค้ด","exerciseRunner.controller.buttonGroup.button.tooltip.aiHelp":"ถามคำถามได้เลยค่ะ","exerciseRunner.controller.runningInfo.error.fetch":"เกิดข้อผิดพลาดขณะดึงข้อมูลการทำงานใหม่","exerciseRunner.controller.runningInfo.lastRunningDatetime":"วันที่และเวลาที่ทำการเรียกใช้ครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"เวลาส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitScore":"คะแนนส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.score":"{score} คะแนน","exerciseRunner.controller.statusMessage.closed":"การเชื่อมต่อกับ Editor ถูกยกเลิก","exerciseRunner.controller.statusMessage.connecting":"กำลังเชื่อมต่อกับ Editor...","exerciseRunner.controller.statusMessage.open":"เชื่อมต่อกับ Editor สำเร็จ","exerciseRunner.controller.tooltip.closed":"ขณะนี้การเชื่อมต่อกับเซิร์ฟเวอร์โค้ดไม่เสถียร การแก้ไขของคุณอาจไม่ถูกบันทึก\nกรุณาตรวจสอบเครือข่ายของคุณก่อนดำเนินการต่อ","exerciseRunner.controller.timer.runningRemainingTime":"เวลาที่เหลืออยู่: {remainingTime}","exerciseRunner.submitErrorDialog.action.confirm":"ยืนยัน","exerciseRunner.submitErrorDialog.action.reload":"โหลดหน้าใหม่","exerciseRunner.submitErrorDialog.body.commonError":"เกิดข้อผิดพลาดขณะรันโค้ด\nโปรดรีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"คุณส่งเกินจำนวนที่กำหนด","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"สภาพแวดล้อมการฝึกอบรมหมดอายุ กรุณารีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.networkError":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารีเฟรชและลองอีกครั้ง\nหากยังมีปัญหา กรุณาตรวจสอบสภาพการเชื่อมต่ออินเทอร์เน็ต","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"การส่งผลงานสำหรับการฝึกอบรมนี้ไม่ถูกต้อง","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"สภาพแวดล้อมการฝึกอบรมกำลังถูกตั้งค่า กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.roomIsBusy":"มีการรันโค้ดอยู่ในขณะนี้ กรุณารอจนกว่าจะเสร็จสิ้น","exerciseRunner.submitErrorDialog.body.unknown":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.title":"ไม่สามารถรันโค้ดได้"};
+var th = {"exerciseRunner.arduino.connectGuide.body":"เพื่อความปลอดภัย เบราว์เซอร์จะแสดงหน้าต่างเลือกบอร์ดให้โดยตรง โปรดมองหาหน้าต่างเล็กๆ ใต้แถบที่อยู่บริเวณซ้ายบนของหน้าจอ แล้วเลือกบอร์ด Arduino ของคุณ","exerciseRunner.arduino.connectGuide.footer":"ถ้ามองไม่เห็นหน้าต่าง ลองตรวจสอบไอคอนกุญแจข้างแถบที่อยู่","exerciseRunner.arduino.connectGuide.preview.cancel":"ยกเลิก","exerciseRunner.arduino.connectGuide.preview.connect":"เชื่อมต่อ","exerciseRunner.arduino.connectGuide.preview.host":"{host} ต้องการเชื่อมต่อกับพอร์ตอนุกรม","exerciseRunner.arduino.connectGuide.preview.label":"หน้าต่างจะมีลักษณะแบบนี้","exerciseRunner.arduino.connectGuide.steps.1":"คลิกที่รายการที่มีชื่อขึ้นต้นด้วย {usbmodem} หรือ {usbserial}","exerciseRunner.arduino.connectGuide.steps.2":"กดปุ่ม {connect} ที่มุมขวาล่างเพื่อเชื่อมต่อ","exerciseRunner.arduino.connectGuide.steps.3":"ถ้าเผลอกด {cancel} ก็สามารถลองใหม่ได้","exerciseRunner.arduino.connectGuide.title.connect":"เลือกบอร์ดในเบราว์เซอร์","exerciseRunner.arduino.connectGuide.title.upload":"เชื่อมต่อบอร์ดก่อน","exerciseRunner.arduino.connectGuide.upload.note":"การอัปโหลดต้องใช้การเชื่อมต่อบอร์ด เมื่อเชื่อมต่อเสร็จ การอัปโหลดจะเริ่มทันที","exerciseRunner.arduino.error.close":"ปิด","exerciseRunner.arduino.error.title":"เกิดข้อผิดพลาดในการเชื่อมต่อ Arduino","exerciseRunner.arduino.help.button":"วิธีใช้","exerciseRunner.arduino.help.checklist.1.body":"เชื่อมต่อบอร์ดกับคอมพิวเตอร์ด้วยสาย USB จากนั้นคลิกปุ่ม [เชื่อมต่อ] ที่อยู่ข้างเมนู","exerciseRunner.arduino.help.checklist.1.title":"เชื่อมต่อบอร์ด Arduino กับคอมพิวเตอร์","exerciseRunner.arduino.help.checklist.2.body":"ปุ่มตรวจสอบจะตรวจหาปัญหาในโค้ดก่อนที่จะส่ง","exerciseRunner.arduino.help.checklist.2.title":"เขียนโค้ดและกด [ตรวจสอบ]","exerciseRunner.arduino.help.checklist.3.body":"โปรแกรมของคุณจะถูกส่งไปยังบอร์ด Arduino ดูผลลัพธ์ในหน้าต่างซีเรียลด้านล่าง","exerciseRunner.arduino.help.checklist.3.title":"กด [อัปโหลด] เพื่อส่งไปยังบอร์ด","exerciseRunner.arduino.help.checklist.4.body":"การส่งจะตรวจให้คะแนนโค้ดของคุณโดยอัตโนมัติและแสดงคะแนน","exerciseRunner.arduino.help.checklist.4.title":"ถ้าใช้ได้ดี กด [ส่ง]!","exerciseRunner.arduino.help.close":"ปิด","exerciseRunner.arduino.help.dontShowAgain":"ไม่ต้องแสดงอีก","exerciseRunner.arduino.help.greeting":"เขียนโค้ดที่นี่เพื่อทำให้บอร์ด Arduino จริงทำงาน ทำตามขั้นตอนด้านล่างตามลำดับ","exerciseRunner.arduino.help.manual.detail":"ดูคู่มืออย่างเป็นทางการสำหรับรายละเอียดการใช้งาน","exerciseRunner.arduino.help.manual.title":"ต้องการคู่มือการใช้งาน?","exerciseRunner.arduino.help.title":"🤖 ยินดีต้อนรับสู่ห้องแล็บ Arduino!","exerciseRunner.arduino.terminal.board.notConnected":"/* Arduino ไม่ได้เชื่อมต่อ กรุณาเชื่อมต่อแล้วลองใหม่ */\n","exerciseRunner.arduino.terminal.compile.done":"/* คอมไพล์เสร็จสมบูรณ์ */\n","exerciseRunner.arduino.terminal.firmware.readFail":"/* อ่านไฟล์เฟิร์มแวร์ไม่สำเร็จ */\n","exerciseRunner.arduino.terminal.session.connected":"/* [เชื่อมต่อแล้ว] {device} */\n","exerciseRunner.arduino.terminal.session.disconnected":"/* [ตัดการเชื่อมต่อ] */\n","exerciseRunner.arduino.terminal.session.reconnected":"/* [เชื่อมต่อใหม่] {device} */\n","exerciseRunner.arduino.terminal.upload.done":"/* อัปโหลดเสร็จสมบูรณ์ */\n","exerciseRunner.arduino.terminal.upload.error":"/* เกิดข้อผิดพลาด: {error} */\n","exerciseRunner.arduino.terminal.upload.errorUnknown":"ไม่ทราบ","exerciseRunner.arduino.terminal.upload.progress":"/* กำลังอัปโหลด... ({percent}%) */\r","exerciseRunner.arduino.terminal.upload.start":"/* เริ่มอัปโหลด */\n","exerciseRunner.arduino.terminal.upload.verifying":"/* กำลังตรวจสอบ... */\n","exerciseRunner.controller.arduino.boardStatus.connected":"{device} เชื่อมต่อแล้ว","exerciseRunner.controller.arduino.boardStatus.connectedNoName":"เชื่อมต่อบอร์ดแล้ว","exerciseRunner.controller.arduino.boardStatus.disconnected":"ตัดการเชื่อมต่อ","exerciseRunner.controller.arduino.boardStatus.idle":"ไม่ได้เชื่อมต่อบอร์ด Arduino","exerciseRunner.controller.arduino.boardStatus.reconnecting":"กำลังเชื่อมต่อใหม่","exerciseRunner.controller.arduino.button.compile":"คอมไพล์","exerciseRunner.controller.arduino.button.connect":"เชื่อมต่อ","exerciseRunner.controller.arduino.button.disconnect":"ตัดการเชื่อมต่อ","exerciseRunner.controller.arduino.button.upload":"อัปโหลด","exerciseRunner.controller.arduino.button.verify":"ตรวจสอบ","exerciseRunner.controller.buttonGroup.button.helpRequest":"ถามเกี่ยวกับโค้ดที่ลาก","exerciseRunner.controller.buttonGroup.button.run":"เรียกใช้งาน","exerciseRunner.controller.buttonGroup.button.stop":"หยุด","exerciseRunner.controller.buttonGroup.button.submit":"ส่ง","exerciseRunner.controller.buttonGroup.button.submit.tooltip.noSubmit":"การฝึกอบรมนี้รองรับเฉพาะการรันเท่านั้น","exerciseRunner.controller.buttonGroup.button.syncRequest":"ซิงค์โค้ด","exerciseRunner.controller.runningInfo.error.fetch":"เกิดข้อผิดพลาดขณะดึงข้อมูลการทำงานใหม่","exerciseRunner.controller.runningInfo.lastRunningDatetime":"วันที่และเวลาที่ทำการเรียกใช้ครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitDatetime":"เวลาส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.lastSubmitScore":"คะแนนส่งครั้งล่าสุด","exerciseRunner.controller.runningInfo.score":"{score} คะแนน","exerciseRunner.controller.statusMessage.closed":"การเชื่อมต่อกับ Editor ถูกยกเลิก","exerciseRunner.controller.statusMessage.connecting":"กำลังเชื่อมต่อกับ Editor...","exerciseRunner.controller.statusMessage.open":"เชื่อมต่อกับ Editor สำเร็จ","exerciseRunner.controller.timer.runningRemainingTime":"เวลาที่เหลืออยู่: {remainingTime}","exerciseRunner.controller.tooltip.closed":"ขณะนี้การเชื่อมต่อกับเซิร์ฟเวอร์โค้ดไม่เสถียร การแก้ไขของคุณอาจไม่ถูกบันทึก\nกรุณาตรวจสอบเครือข่ายของคุณก่อนดำเนินการต่อ","exerciseRunner.submitErrorDialog.action.confirm":"ยืนยัน","exerciseRunner.submitErrorDialog.action.reload":"โหลดหน้าใหม่","exerciseRunner.submitErrorDialog.body.commonError":"เกิดข้อผิดพลาดขณะรันโค้ด\nโปรดรีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.exceedSubmitGradeLimit":"คุณส่งเกินจำนวนที่กำหนด","exerciseRunner.submitErrorDialog.body.expiredExerciseImage":"สภาพแวดล้อมการฝึกอบรมหมดอายุ กรุณารีเฟรชและลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.networkError":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารีเฟรชและลองอีกครั้ง\nหากยังมีปัญหา กรุณาตรวจสอบสภาพการเชื่อมต่ออินเทอร์เน็ต","exerciseRunner.submitErrorDialog.body.notForSubmitGrade":"การส่งผลงานสำหรับการฝึกอบรมนี้ไม่ถูกต้อง","exerciseRunner.submitErrorDialog.body.notPreparedRoom":"สภาพแวดล้อมการฝึกอบรมกำลังถูกตั้งค่า กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.body.roomIsBusy":"มีการรันโค้ดอยู่ในขณะนี้ กรุณารอจนกว่าจะเสร็จสิ้น","exerciseRunner.submitErrorDialog.body.unknown":"เกิดข้อผิดพลาดขณะรันโค้ด กรุณารอสักครู่และลองอีกครั้ง","exerciseRunner.submitErrorDialog.title":"ไม่สามารถรันโค้ดได้"};
 
 export { th as default };

package/es/components/shared/exercise-version-list/ExerciseVersionList.js

@@ -1,6 +1,18 @@
+import _styled from '@emotion/styled/base';
 import { jsx } from 'react/jsx-runtime';
-import { StyledVersionList } from './ExerciseVersionList.styled.js';
+import { List } from '@elice/blocks';
 
+function _EMOTION_STRINGIFIED_CSS_ERROR__() { return "You have tried to stringify object returned from `css` function. It isn't supposed to be used directly (e.g. as value of the `className` prop), but rather handed to emotion so it can handle it (e.g. as value of `css` prop)."; }
+var StyledVersionList = /*#__PURE__*/_styled(List, {
+  target: "e1plvajs0"
+})("production" === "production" ? {
+  name: "1uke1dw",
+  styles: "height:100%;padding:0;overflow:scroll;background-color:transparent;&>last-of-type{border:none;}"
+} : {
+  name: "1uke1dw",
+  styles: "height:100%;padding:0;overflow:scroll;background-color:transparent;&>last-of-type{border:none;}",
+  toString: _EMOTION_STRINGIFIED_CSS_ERROR__
+});
 var ExerciseVersionList = function ExerciseVersionList(_ref) {
   var children = _ref.children;
   return jsx(StyledVersionList, {

package/es/components/shared/exercise-version-list/ExerciseVersionListItem.d.ts

@@ -1,5 +1,6 @@
 import type React from 'react';
 interface ExerciseVersionListItemProps {
+    children?: React.ReactNode;
     selected?: boolean;
     style?: React.CSSProperties;
     onClick?: () => void;

package/es/components/shared/file-tabs/FileTab.js

@@ -1,10 +1,71 @@
+import _styled from '@emotion/styled/base';
 import { __rest } from 'tslib';
 import { jsxs, jsx } from 'react/jsx-runtime';
 import React from 'react';
+import { Text, IconButton } from '@elice/blocks';
+import { base } from '@elice/design-tokens';
 import { eilMathsignMultiplyBasic } from '@elice/icons';
-import { StyledTab, StyledTabContent, StyledTabActiveBorder, StyledTabLabel, StyledTabCloseButton, StyledTabLabelFilename, StyledTabLabelDirname } from './FileTab.styled.js';
+import { css } from '@emotion/react';
 import FileIcon from '../file-icon/FileIcon.js';
 
+function _EMOTION_STRINGIFIED_CSS_ERROR__() { return "You have tried to stringify object returned from `css` function. It isn't supposed to be used directly (e.g. as value of the `className` prop), but rather handed to emotion so it can handle it (e.g. as value of `css` prop)."; }
+var TAB_MIN_WIDTH = '7rem';
+var TAB_VERTICAL_BORDER_WIDTH = '1.5px';
+var TAB_BACKGROUND_COLOR = base.color.navy8;
+var TAB_ACTIVE_BACKGROUND_COLOR = base.color.navy9;
+var TAB_HOVERED_BACKGROUND_COLOR = base.color.navy7;
+// ========== Tab label ==========
+var StyledTabLabel = /*#__PURE__*/_styled("div", {
+  target: "eb5vmnz6"
+})("production" === "production" ? {
+  name: "1v2fhdm",
+  styles: "flex:1;display:flex;align-items:center;overflow:hidden;pointer-events:none;user-select:none;&>*{margin-right:0.5rem;}"
+} : {
+  name: "1v2fhdm",
+  styles: "flex:1;display:flex;align-items:center;overflow:hidden;pointer-events:none;user-select:none;&>*{margin-right:0.5rem;}",
+  toString: _EMOTION_STRINGIFIED_CSS_ERROR__
+});
+var StyledTabLabelFilename = /*#__PURE__*/_styled(Text, {
+  target: "eb5vmnz5"
+})("color:", base.color.gray4, ";font-weight:500;");
+var StyledTabLabelDirname = /*#__PURE__*/_styled(Text, {
+  target: "eb5vmnz4"
+})("production" === "production" ? {
+  name: "f3vz0n",
+  styles: "font-weight:500"
+} : {
+  name: "f3vz0n",
+  styles: "font-weight:500",
+  toString: _EMOTION_STRINGIFIED_CSS_ERROR__
+});
+var StyledTabCloseButton = /*#__PURE__*/_styled(IconButton, {
+  target: "eb5vmnz3"
+})("production" === "production" ? {
+  name: "19zzndm",
+  styles: "flex:0 0 auto;margin-right:0.25rem!important;opacity:0;transition:opacity 150ms ease-in-out"
+} : {
+  name: "19zzndm",
+  styles: "flex:0 0 auto;margin-right:0.25rem!important;opacity:0;transition:opacity 150ms ease-in-out",
+  toString: _EMOTION_STRINGIFIED_CSS_ERROR__
+});
+// ========== Tab content ==========
+var StyledTabContent = /*#__PURE__*/_styled("div", {
+  target: "eb5vmnz2"
+})("display:flex;flex-direction:row;justify-content:space-between;align-items:center;padding-left:0.5rem;height:calc(100% - ", TAB_VERTICAL_BORDER_WIDTH, ");&:hover{", StyledTabLabelFilename, "{color:", base.color.gray3, ";}", StyledTabCloseButton, "{opacity:1;}}");
+// ========== Tab active border ==========
+var StyledTabActiveBorder = /*#__PURE__*/_styled("div", {
+  target: "eb5vmnz1"
+})("height:", TAB_VERTICAL_BORDER_WIDTH, ";background-color:", base.color.primary5, ";opacity:0;");
+// ========== Tab ==========
+var cssTabActive = /*#__PURE__*/css("background-color:", TAB_ACTIVE_BACKGROUND_COLOR, ";", StyledTabLabelFilename, "{color:", base.color.gray3, ";}", StyledTabCloseButton, "{opacity:1;}", StyledTabActiveBorder, "{opacity:1;}");
+var cssTabHovered = /*#__PURE__*/css("background-color:", TAB_HOVERED_BACKGROUND_COLOR, ";", StyledTabLabelFilename, "{color:", base.color.gray3, ";}");
+var StyledTab = /*#__PURE__*/_styled("div", {
+  target: "eb5vmnz0"
+})("padding-top:", TAB_VERTICAL_BORDER_WIDTH, ";width:", TAB_MIN_WIDTH, ";min-width:fit-content;height:100%;background-color:", TAB_BACKGROUND_COLOR, ";border-right:1px solid ", base.color.navy7, ";cursor:pointer;", function (props) {
+  return props.active && cssTabActive;
+}, " ", function (props) {
+  return props.hovered && cssTabHovered;
+}, ";");
 var EMPTY_CHUNKS = [];
 var FileTab = function FileTab(_a) {
   var fullname = _a.fullname,