@effect/platform-bun 4.0.0-beta.70 → 4.0.0-beta.71

package/dist/BunClusterHttp.d.ts

@@ -66,6 +66,30 @@ export declare const layerHttpServer: Layer.Layer<HttpPlatform | Etag.Generator
 /**
  * Creates Bun cluster layers for HTTP or WebSocket transport, configuring serialization, storage, runner health, and optional client-only mode.
  *
+ * **When to use**
+ *
+ * Use to install the complete Bun HTTP or WebSocket cluster layer, including
+ * client-only cluster access when a process should connect without serving
+ * runner RPCs.
+ *
+ * **Details**
+ *
+ * `serialization` defaults to MessagePack, `runnerHealth` defaults to ping
+ * checks, SQL-backed storage is used by default, and `shardingConfig` is
+ * overlaid on environment-loaded sharding configuration. `local` storage uses
+ * no-op message storage plus in-memory runner storage, while `byo` leaves both
+ * message and runner storage for the caller to provide.
+ *
+ * **Gotchas**
+ *
+ * `clientOnly` does not start the HTTP server or receive shard assignments.
+ * Non-client-only mode listens with `runnerListenAddress` when present, falling
+ * back to `runnerAddress`. HTTP and WebSocket runner RPCs use the default
+ * `HttpRunner` route.
+ *
+ * @see {@link layerHttpServer} for the server layer used by non-client-only transports
+ * @see {@link layerK8sHttpClient} for Kubernetes runner health support
+ *
  * @category layers
  * @since 4.0.0
  */

package/dist/BunClusterHttp.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunClusterHttp.d.ts","sourceRoot":"","sources":["../src/BunClusterHttp.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAmCG;AACH,OAAO,KAAK,KAAK,MAAM,MAAM,eAAe,CAAA;AAE5C,OAAO,KAAK,KAAK,MAAM,cAAc,CAAA;AAGrC,OAAO,KAAK,cAAc,MAAM,wCAAwC,CAAA;AAExE,OAAO,KAAK,OAAO,MAAM,iCAAiC,CAAA;AAC1D,OAAO,KAAK,aAAa,MAAM,uCAAuC,CAAA;AACtE,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,kCAAkC,CAAA;AAChE,OAAO,KAAK,cAAc,MAAM,wCAAwC,CAAA;AAGxE,OAAO,KAAK,KAAK,IAAI,MAAM,2BAA2B,CAAA;AAEtD,OAAO,KAAK,EAAE,YAAY,EAAE,MAAM,mCAAmC,CAAA;AACrE,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,iCAAiC,CAAA;AACjE,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,sCAAsC,CAAA;AAEtE,OAAO,KAAK,EAAE,SAAS,EAAE,MAAM,+BAA+B,CAAA;AAC9D,OAAO,EAAE,kBAAkB,EAAE,MAAM,uBAAuB,CAAA;AAG1D,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAA;AAGnD,OAAO;AACL;;;;;GAKG;AACH,kBAAkB,EACnB,CAAA;AAED;;;;;GAKG;AACH,eAAO,MAAM,eAAe,EAAE,KAAK,CAAC,KAAK,CACrC,YAAY,GACZ,IAAI,CAAC,SAAS,GACd,WAAW,GACX,UAAU,EACZ,UAAU,EACV,cAAc,CAAC,cAAc,CAQV,CAAA;AAErB;;;;;GAKG;AACH,eAAO,MAAM,KAAK,GAChB,KAAK,CAAC,UAAU,SAAS,OAAO,GAAG,KAAK,EACxC,KAAK,CAAC,OAAO,SAAS,OAAO,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,EACrD,SAAS;IACT,QAAQ,CAAC,SAAS,EAAE,MAAM,GAAG,WAAW,CAAA;IACxC,QAAQ,CAAC,aAAa,CAAC,EAAE,SAAS,GAAG,QAAQ,GAAG,SAAS,CAAA;IACzD,QAAQ,CAAC,UAAU,CAAC,EAAE,UAAU,GAAG,SAAS,CAAA;IAC5C,QAAQ,CAAC,OAAO,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;IACtC,QAAQ,CAAC,YAAY,CAAC,EAAE,MAAM,GAAG,KAAK,GAAG,SAAS,CAAA;IAClD,QAAQ,CAAC,eAAe,CAAC,EAAE;QACzB,QAAQ,CAAC,SAAS,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;QACvC,QAAQ,CAAC,aAAa,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;KAC5C,GAAG,SAAS,CAAA;IACb,QAAQ,CAAC,cAAc,CAAC,EAAE,OAAO,CAAC,cAAc,CAAC,cAAc,CAAC,SAAS,CAAC,CAAC,GAAG,SAAS,CAAA;CACxF,KAAG,UAAU,SAAS,IAAI,GAAG,KAAK,CAAC,KAAK,CACrC,QAAQ,GAAG,OAAO,CAAC,OAAO,GAAG,CAAC,KAAK,SAAS,OAAO,GAAG,KAAK,GAAG,cAAc,CAAC,cAAc,CAAC,EAC5F,MAAM,CAAC,WAAW,EAClB,OAAO,SAAS,OAAO,GAAG,KAAK,GAC3B,KAAK,SAAS,OAAO,GAAG,CAAC,cAAc,CAAC,cAAc,GAAG,aAAa,CAAC,aAAa,CAAC,GACrF,SAAS,CACd,GACD,KAAK,CAAC,KAAK,CACT,QAAQ,GAAG,OAAO,CAAC,OAAO,GAAG,cAAc,CAAC,cAAc,EAC1D,UAAU,GAAG,MAAM,CAAC,WAAW,EAC/B,OAAO,SAAS,OAAO,GAAG,KAAK,GAC3B,KAAK,SAAS,OAAO,GAAG,CAAC,cAAc,CAAC,cAAc,GAAG,aAAa,CAAC,aAAa,CAAC,GACrF,SAAS,CAiDhB,CAAA"}
+{"version":3,"file":"BunClusterHttp.d.ts","sourceRoot":"","sources":["../src/BunClusterHttp.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAmCG;AACH,OAAO,KAAK,KAAK,MAAM,MAAM,eAAe,CAAA;AAE5C,OAAO,KAAK,KAAK,MAAM,cAAc,CAAA;AAGrC,OAAO,KAAK,cAAc,MAAM,wCAAwC,CAAA;AAExE,OAAO,KAAK,OAAO,MAAM,iCAAiC,CAAA;AAC1D,OAAO,KAAK,aAAa,MAAM,uCAAuC,CAAA;AACtE,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,kCAAkC,CAAA;AAChE,OAAO,KAAK,cAAc,MAAM,wCAAwC,CAAA;AAGxE,OAAO,KAAK,KAAK,IAAI,MAAM,2BAA2B,CAAA;AAEtD,OAAO,KAAK,EAAE,YAAY,EAAE,MAAM,mCAAmC,CAAA;AACrE,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,iCAAiC,CAAA;AACjE,OAAO,KAAK,EAAE,UAAU,EAAE,MAAM,sCAAsC,CAAA;AAEtE,OAAO,KAAK,EAAE,SAAS,EAAE,MAAM,+BAA+B,CAAA;AAC9D,OAAO,EAAE,kBAAkB,EAAE,MAAM,uBAAuB,CAAA;AAG1D,OAAO,KAAK,EAAE,WAAW,EAAE,MAAM,kBAAkB,CAAA;AAGnD,OAAO;AACL;;;;;GAKG;AACH,kBAAkB,EACnB,CAAA;AAED;;;;;GAKG;AACH,eAAO,MAAM,eAAe,EAAE,KAAK,CAAC,KAAK,CACrC,YAAY,GACZ,IAAI,CAAC,SAAS,GACd,WAAW,GACX,UAAU,EACZ,UAAU,EACV,cAAc,CAAC,cAAc,CAQV,CAAA;AAErB;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GA6BG;AACH,eAAO,MAAM,KAAK,GAChB,KAAK,CAAC,UAAU,SAAS,OAAO,GAAG,KAAK,EACxC,KAAK,CAAC,OAAO,SAAS,OAAO,GAAG,KAAK,GAAG,KAAK,GAAG,KAAK,EACrD,SAAS;IACT,QAAQ,CAAC,SAAS,EAAE,MAAM,GAAG,WAAW,CAAA;IACxC,QAAQ,CAAC,aAAa,CAAC,EAAE,SAAS,GAAG,QAAQ,GAAG,SAAS,CAAA;IACzD,QAAQ,CAAC,UAAU,CAAC,EAAE,UAAU,GAAG,SAAS,CAAA;IAC5C,QAAQ,CAAC,OAAO,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;IACtC,QAAQ,CAAC,YAAY,CAAC,EAAE,MAAM,GAAG,KAAK,GAAG,SAAS,CAAA;IAClD,QAAQ,CAAC,eAAe,CAAC,EAAE;QACzB,QAAQ,CAAC,SAAS,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;QACvC,QAAQ,CAAC,aAAa,CAAC,EAAE,MAAM,GAAG,SAAS,CAAA;KAC5C,GAAG,SAAS,CAAA;IACb,QAAQ,CAAC,cAAc,CAAC,EAAE,OAAO,CAAC,cAAc,CAAC,cAAc,CAAC,SAAS,CAAC,CAAC,GAAG,SAAS,CAAA;CACxF,KAAG,UAAU,SAAS,IAAI,GAAG,KAAK,CAAC,KAAK,CACrC,QAAQ,GAAG,OAAO,CAAC,OAAO,GAAG,CAAC,KAAK,SAAS,OAAO,GAAG,KAAK,GAAG,cAAc,CAAC,cAAc,CAAC,EAC5F,MAAM,CAAC,WAAW,EAClB,OAAO,SAAS,OAAO,GAAG,KAAK,GAC3B,KAAK,SAAS,OAAO,GAAG,CAAC,cAAc,CAAC,cAAc,GAAG,aAAa,CAAC,aAAa,CAAC,GACrF,SAAS,CACd,GACD,KAAK,CAAC,KAAK,CACT,QAAQ,GAAG,OAAO,CAAC,OAAO,GAAG,cAAc,CAAC,cAAc,EAC1D,UAAU,GAAG,MAAM,CAAC,WAAW,EAC/B,OAAO,SAAS,OAAO,GAAG,KAAK,GAC3B,KAAK,SAAS,OAAO,GAAG,CAAC,cAAc,CAAC,cAAc,GAAG,aAAa,CAAC,aAAa,CAAC,GACrF,SAAS,CAiDhB,CAAA"}

package/dist/BunClusterHttp.js

@@ -40,6 +40,30 @@ export const layerHttpServer = /*#__PURE__*/Effect.gen(function* () {
 /**
  * Creates Bun cluster layers for HTTP or WebSocket transport, configuring serialization, storage, runner health, and optional client-only mode.
  *
+ * **When to use**
+ *
+ * Use to install the complete Bun HTTP or WebSocket cluster layer, including
+ * client-only cluster access when a process should connect without serving
+ * runner RPCs.
+ *
+ * **Details**
+ *
+ * `serialization` defaults to MessagePack, `runnerHealth` defaults to ping
+ * checks, SQL-backed storage is used by default, and `shardingConfig` is
+ * overlaid on environment-loaded sharding configuration. `local` storage uses
+ * no-op message storage plus in-memory runner storage, while `byo` leaves both
+ * message and runner storage for the caller to provide.
+ *
+ * **Gotchas**
+ *
+ * `clientOnly` does not start the HTTP server or receive shard assignments.
+ * Non-client-only mode listens with `runnerListenAddress` when present, falling
+ * back to `runnerAddress`. HTTP and WebSocket runner RPCs use the default
+ * `HttpRunner` route.
+ *
+ * @see {@link layerHttpServer} for the server layer used by non-client-only transports
+ * @see {@link layerK8sHttpClient} for Kubernetes runner health support
+ *
  * @category layers
  * @since 4.0.0
  */

package/dist/BunClusterHttp.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunClusterHttp.js","names":["Effect","Layer","Option","HttpRunner","MessageStorage","RunnerHealth","Runners","RunnerStorage","ShardingConfig","SqlMessageStorage","SqlRunnerStorage","FetchHttpClient","RpcSerialization","layerK8sHttpClient","BunFileSystem","BunHttpServer","BunSocket","layerHttpServer","gen","config","listenAddress","orElse","runnerListenAddress","runnerAddress","isNone","die","layer","value","pipe","unwrap","options","clientOnly","transport","provide","layerHttpClientOnly","layerWebsocketClientOnly","layerWebSocketConstructor","layerHttp","layerWebsocket","runnerHealth","empty","layerK8s","runnerHealthK8s","layerPing","layerRpc","layerClientProtocolHttpDefault","layerClientProtocolWebsocketDefault","provideMerge","storage","layerNoop","orDie","layerMemory","layerFromEnv","shardingConfig","serialization","layerNdjson","layerMsgPack"],"sources":["../src/BunClusterHttp.ts"],"sourcesContent":[null],"mappings":"AAqCA,OAAO,KAAKA,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,UAAU,MAAM,oCAAoC;AAChE,OAAO,KAAKC,cAAc,MAAM,wCAAwC;AACxE,OAAO,KAAKC,YAAY,MAAM,sCAAsC;AACpE,OAAO,KAAKC,OAAO,MAAM,iCAAiC;AAC1D,OAAO,KAAKC,aAAa,MAAM,uCAAuC;AAEtE,OAAO,KAAKC,cAAc,MAAM,wCAAwC;AACxE,OAAO,KAAKC,iBAAiB,MAAM,2CAA2C;AAC9E,OAAO,KAAKC,gBAAgB,MAAM,0CAA0C;AAE5E,OAAO,KAAKC,eAAe,MAAM,sCAAsC;AAIvE,OAAO,KAAKC,gBAAgB,MAAM,sCAAsC;AAExE,SAASC,kBAAkB,QAAQ,uBAAuB;AAC1D,OAAO,KAAKC,aAAa,MAAM,oBAAoB;AACnD,OAAO,KAAKC,aAAa,MAAM,oBAAoB;AAEnD,OAAO,KAAKC,SAAS,MAAM,gBAAgB;AAE3C;AACE;;;;;;AAMAH,kBAAkB;AAGpB;;;;;;AAMA,OAAO,MAAMI,eAAe,gBAOxBjB,MAAM,CAACkB,GAAG,CAAC,aAAS;EACtB,MAAMC,MAAM,GAAG,OAAOX,cAAc,CAACA,cAAc;EACnD,MAAMY,aAAa,GAAGlB,MAAM,CAACmB,MAAM,CAACF,MAAM,CAACG,mBAAmB,EAAE,MAAMH,MAAM,CAACI,aAAa,CAAC;EAC3F,IAAIrB,MAAM,CAACsB,MAAM,CAACJ,aAAa,CAAC,EAAE;IAChC,OAAO,OAAOpB,MAAM,CAACyB,GAAG,CAAC,sEAAsE,CAAC;EAClG;EACA,OAAOV,aAAa,CAACW,KAAK,CAACN,aAAa,CAACO,KAAK,CAAC;AACjD,CAAC,CAAC,CAACC,IAAI,CAAC3B,KAAK,CAAC4B,MAAM,CAAC;AAErB;;;;;;AAMA,OAAO,MAAMH,KAAK,GAGhBI,OAWD,IAaK;EAEJ,MAAMJ,KAAK,GAA+BI,OAAO,CAACC;EAChD;EAAA,EACED,OAAO,CAACE,SAAS,KAAK,MAAM,GAC1B/B,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAAC+B,mBAAmB,EAAEvB,eAAe,CAACe,KAAK,CAAC,GACpEzB,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAACgC,wBAAwB,EAAEnB,SAAS,CAACoB,yBAAyB;EAC1F;EAAA,EACEN,OAAO,CAACE,SAAS,KAAK,MAAM,GAC5B/B,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAACkC,SAAS,EAAE,CAACpB,eAAe,EAAEN,eAAe,CAACe,KAAK,CAAC,CAAC,GAC7EzB,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAACmC,cAAc,EAAE,CAACrB,eAAe,EAAED,SAAS,CAACoB,yBAAyB,CAAC,CAAC;EAEpG,MAAMG,YAAY,GAA+BT,OAAO,EAAEC,UAAU,GAChE9B,KAAK,CAACuC,KAAY,GAClBV,OAAO,EAAES,YAAY,KAAK,KAAK,GAC/BlC,YAAY,CAACoC,QAAQ,CAACX,OAAO,CAACY,eAAe,CAAC,CAACd,IAAI,CACnD3B,KAAK,CAACgC,OAAO,CAAC,CAACnB,aAAa,CAACY,KAAK,EAAEb,kBAAkB,CAAC,CAAC,CACzD,GACCR,YAAY,CAACsC,SAAS,CAACf,IAAI,CAC3B3B,KAAK,CAACgC,OAAO,CAAC3B,OAAO,CAACsC,QAAQ,CAAC,EAC/B3C,KAAK,CAACgC,OAAO,CACXH,OAAO,CAACE,SAAS,KAAK,MAAM,GACxB7B,UAAU,CAAC0C,8BAA8B,CAACjB,IAAI,CAAC3B,KAAK,CAACgC,OAAO,CAACtB,eAAe,CAACe,KAAK,CAAC,CAAC,GACpFvB,UAAU,CAAC2C,mCAAmC,CAAClB,IAAI,CAAC3B,KAAK,CAACgC,OAAO,CAACjB,SAAS,CAACoB,yBAAyB,CAAC,CAAC,CAC5G,CACF;EAEH,OAAOV,KAAK,CAACE,IAAI,CACf3B,KAAK,CAACgC,OAAO,CAACM,YAAY,CAAC,EAC3BtC,KAAK,CAAC8C,YAAY,CAChBjB,OAAO,EAAEkB,OAAO,KAAK,OAAO,GACxB5C,cAAc,CAAC6C,SAAS,GACxBnB,OAAO,EAAEkB,OAAO,KAAK,KAAK,GAC1B/C,KAAK,CAACuC,KAAK,GACXvC,KAAK,CAACiD,KAAK,CAACzC,iBAAiB,CAACiB,KAAK,CAAC,CACzC,EACDzB,KAAK,CAACgC,OAAO,CACXH,OAAO,EAAEkB,OAAO,KAAK,OAAO,GACxBzC,aAAa,CAAC4C,WAAW,GACzBrB,OAAO,EAAEkB,OAAO,KAAK,KAAK,GAC1B/C,KAAK,CAACuC,KAAK,GACXvC,KAAK,CAACiD,KAAK,CAACxC,gBAAgB,CAACgB,KAAK,CAAC,CACxC,EACDzB,KAAK,CAACgC,OAAO,CAACzB,cAAc,CAAC4C,YAAY,CAACtB,OAAO,EAAEuB,cAAc,CAAC,CAAC,EACnEpD,KAAK,CAACgC,OAAO,CACXH,OAAO,EAAEwB,aAAa,KAAK,QAAQ,GAAG1C,gBAAgB,CAAC2C,WAAW,GAAG3C,gBAAgB,CAAC4C,YAAY,CACnG,CACK;AACV,CAAC","ignoreList":[]}
+{"version":3,"file":"BunClusterHttp.js","names":["Effect","Layer","Option","HttpRunner","MessageStorage","RunnerHealth","Runners","RunnerStorage","ShardingConfig","SqlMessageStorage","SqlRunnerStorage","FetchHttpClient","RpcSerialization","layerK8sHttpClient","BunFileSystem","BunHttpServer","BunSocket","layerHttpServer","gen","config","listenAddress","orElse","runnerListenAddress","runnerAddress","isNone","die","layer","value","pipe","unwrap","options","clientOnly","transport","provide","layerHttpClientOnly","layerWebsocketClientOnly","layerWebSocketConstructor","layerHttp","layerWebsocket","runnerHealth","empty","layerK8s","runnerHealthK8s","layerPing","layerRpc","layerClientProtocolHttpDefault","layerClientProtocolWebsocketDefault","provideMerge","storage","layerNoop","orDie","layerMemory","layerFromEnv","shardingConfig","serialization","layerNdjson","layerMsgPack"],"sources":["../src/BunClusterHttp.ts"],"sourcesContent":[null],"mappings":"AAqCA,OAAO,KAAKA,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,UAAU,MAAM,oCAAoC;AAChE,OAAO,KAAKC,cAAc,MAAM,wCAAwC;AACxE,OAAO,KAAKC,YAAY,MAAM,sCAAsC;AACpE,OAAO,KAAKC,OAAO,MAAM,iCAAiC;AAC1D,OAAO,KAAKC,aAAa,MAAM,uCAAuC;AAEtE,OAAO,KAAKC,cAAc,MAAM,wCAAwC;AACxE,OAAO,KAAKC,iBAAiB,MAAM,2CAA2C;AAC9E,OAAO,KAAKC,gBAAgB,MAAM,0CAA0C;AAE5E,OAAO,KAAKC,eAAe,MAAM,sCAAsC;AAIvE,OAAO,KAAKC,gBAAgB,MAAM,sCAAsC;AAExE,SAASC,kBAAkB,QAAQ,uBAAuB;AAC1D,OAAO,KAAKC,aAAa,MAAM,oBAAoB;AACnD,OAAO,KAAKC,aAAa,MAAM,oBAAoB;AAEnD,OAAO,KAAKC,SAAS,MAAM,gBAAgB;AAE3C;AACE;;;;;;AAMAH,kBAAkB;AAGpB;;;;;;AAMA,OAAO,MAAMI,eAAe,gBAOxBjB,MAAM,CAACkB,GAAG,CAAC,aAAS;EACtB,MAAMC,MAAM,GAAG,OAAOX,cAAc,CAACA,cAAc;EACnD,MAAMY,aAAa,GAAGlB,MAAM,CAACmB,MAAM,CAACF,MAAM,CAACG,mBAAmB,EAAE,MAAMH,MAAM,CAACI,aAAa,CAAC;EAC3F,IAAIrB,MAAM,CAACsB,MAAM,CAACJ,aAAa,CAAC,EAAE;IAChC,OAAO,OAAOpB,MAAM,CAACyB,GAAG,CAAC,sEAAsE,CAAC;EAClG;EACA,OAAOV,aAAa,CAACW,KAAK,CAACN,aAAa,CAACO,KAAK,CAAC;AACjD,CAAC,CAAC,CAACC,IAAI,CAAC3B,KAAK,CAAC4B,MAAM,CAAC;AAErB;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AA8BA,OAAO,MAAMH,KAAK,GAGhBI,OAWD,IAaK;EAEJ,MAAMJ,KAAK,GAA+BI,OAAO,CAACC;EAChD;EAAA,EACED,OAAO,CAACE,SAAS,KAAK,MAAM,GAC1B/B,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAAC+B,mBAAmB,EAAEvB,eAAe,CAACe,KAAK,CAAC,GACpEzB,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAACgC,wBAAwB,EAAEnB,SAAS,CAACoB,yBAAyB;EAC1F;EAAA,EACEN,OAAO,CAACE,SAAS,KAAK,MAAM,GAC5B/B,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAACkC,SAAS,EAAE,CAACpB,eAAe,EAAEN,eAAe,CAACe,KAAK,CAAC,CAAC,GAC7EzB,KAAK,CAACgC,OAAO,CAAC9B,UAAU,CAACmC,cAAc,EAAE,CAACrB,eAAe,EAAED,SAAS,CAACoB,yBAAyB,CAAC,CAAC;EAEpG,MAAMG,YAAY,GAA+BT,OAAO,EAAEC,UAAU,GAChE9B,KAAK,CAACuC,KAAY,GAClBV,OAAO,EAAES,YAAY,KAAK,KAAK,GAC/BlC,YAAY,CAACoC,QAAQ,CAACX,OAAO,CAACY,eAAe,CAAC,CAACd,IAAI,CACnD3B,KAAK,CAACgC,OAAO,CAAC,CAACnB,aAAa,CAACY,KAAK,EAAEb,kBAAkB,CAAC,CAAC,CACzD,GACCR,YAAY,CAACsC,SAAS,CAACf,IAAI,CAC3B3B,KAAK,CAACgC,OAAO,CAAC3B,OAAO,CAACsC,QAAQ,CAAC,EAC/B3C,KAAK,CAACgC,OAAO,CACXH,OAAO,CAACE,SAAS,KAAK,MAAM,GACxB7B,UAAU,CAAC0C,8BAA8B,CAACjB,IAAI,CAAC3B,KAAK,CAACgC,OAAO,CAACtB,eAAe,CAACe,KAAK,CAAC,CAAC,GACpFvB,UAAU,CAAC2C,mCAAmC,CAAClB,IAAI,CAAC3B,KAAK,CAACgC,OAAO,CAACjB,SAAS,CAACoB,yBAAyB,CAAC,CAAC,CAC5G,CACF;EAEH,OAAOV,KAAK,CAACE,IAAI,CACf3B,KAAK,CAACgC,OAAO,CAACM,YAAY,CAAC,EAC3BtC,KAAK,CAAC8C,YAAY,CAChBjB,OAAO,EAAEkB,OAAO,KAAK,OAAO,GACxB5C,cAAc,CAAC6C,SAAS,GACxBnB,OAAO,EAAEkB,OAAO,KAAK,KAAK,GAC1B/C,KAAK,CAACuC,KAAK,GACXvC,KAAK,CAACiD,KAAK,CAACzC,iBAAiB,CAACiB,KAAK,CAAC,CACzC,EACDzB,KAAK,CAACgC,OAAO,CACXH,OAAO,EAAEkB,OAAO,KAAK,OAAO,GACxBzC,aAAa,CAAC4C,WAAW,GACzBrB,OAAO,EAAEkB,OAAO,KAAK,KAAK,GAC1B/C,KAAK,CAACuC,KAAK,GACXvC,KAAK,CAACiD,KAAK,CAACxC,gBAAgB,CAACgB,KAAK,CAAC,CACxC,EACDzB,KAAK,CAACgC,OAAO,CAACzB,cAAc,CAAC4C,YAAY,CAACtB,OAAO,EAAEuB,cAAc,CAAC,CAAC,EACnEpD,KAAK,CAACgC,OAAO,CACXH,OAAO,EAAEwB,aAAa,KAAK,QAAQ,GAAG1C,gBAAgB,CAAC2C,WAAW,GAAG3C,gBAAgB,CAAC4C,YAAY,CACnG,CACK;AACV,CAAC","ignoreList":[]}

package/dist/BunCrypto.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunCrypto.d.ts","sourceRoot":"","sources":["../src/BunCrypto.ts"],"names":[],"mappings":"AAMA,OAAO,KAAK,KAAK,MAAM,MAAM,eAAe,CAAA;AAC5C,OAAO,KAAK,KAAK,KAAK,MAAM,cAAc,CAAA;AAE1C;;;;;GAKG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAoB,CAAA"}
+{"version":3,"file":"BunCrypto.d.ts","sourceRoot":"","sources":["../src/BunCrypto.ts"],"names":[],"mappings":"AAcA,OAAO,KAAK,KAAK,MAAM,MAAM,eAAe,CAAA;AAC5C,OAAO,KAAK,KAAK,KAAK,MAAM,cAAc,CAAA;AAE1C;;;;;GAKG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,KAAK,CAAC,MAAM,CAAC,MAAM,CAAoB,CAAA"}

package/dist/BunCrypto.js

@@ -1,5 +1,13 @@
 /**
- * Bun platform Crypto service layer.
+ * The `BunCrypto` module provides Bun's `Crypto` service layer for Effect
+ * programs. Provide {@link layer} at the edge of a Bun app, CLI, script, or
+ * test to satisfy `effect/Crypto` with cryptographically secure random bytes,
+ * UUID generation, random values, and SHA digest operations.
+ *
+ * This adapter reuses the shared Node-compatible implementation, so randomness
+ * and digest behavior follow Bun's `node:crypto` compatibility layer. SHA-1 is
+ * present for interoperability with existing protocols, not for new
+ * security-sensitive designs.
  *
  * @since 1.0.0
  */

package/dist/BunCrypto.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunCrypto.js","names":["NodeCrypto","layer"],"sources":["../src/BunCrypto.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;AAKA,OAAO,KAAKA,UAAU,MAAM,yCAAyC;AAIrE;;;;;;AAMA,OAAO,MAAMC,KAAK,GAA+BD,UAAU,CAACC,KAAK","ignoreList":[]}
+{"version":3,"file":"BunCrypto.js","names":["NodeCrypto","layer"],"sources":["../src/BunCrypto.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;AAaA,OAAO,KAAKA,UAAU,MAAM,yCAAyC;AAIrE;;;;;;AAMA,OAAO,MAAMC,KAAK,GAA+BD,UAAU,CAACC,KAAK","ignoreList":[]}

package/dist/BunPath.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunPath.d.ts","sourceRoot":"","sources":["../src/BunPath.ts"],"names":[],"mappings":"AAqBA,OAAO,KAAK,KAAK,KAAK,MAAM,cAAc,CAAA;AAC1C,OAAO,KAAK,EAAE,IAAI,EAAE,MAAM,aAAa,CAAA;AAEvC;;;;;GAKG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,KAAK,CAAC,IAAI,CAAkB,CAAA;AAEtD;;;;;GAKG;AACH,eAAO,MAAM,UAAU,EAAE,KAAK,CAAC,KAAK,CAAC,IAAI,CAAuB,CAAA;AAEhE;;;;;GAKG;AACH,eAAO,MAAM,UAAU,EAAE,KAAK,CAAC,KAAK,CAAC,IAAI,CAAuB,CAAA"}
+{"version":3,"file":"BunPath.d.ts","sourceRoot":"","sources":["../src/BunPath.ts"],"names":[],"mappings":"AAiCA,OAAO,KAAK,KAAK,KAAK,MAAM,cAAc,CAAA;AAC1C,OAAO,KAAK,EAAE,IAAI,EAAE,MAAM,aAAa,CAAA;AAEvC;;;;;GAKG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,KAAK,CAAC,IAAI,CAAkB,CAAA;AAEtD;;;;;GAKG;AACH,eAAO,MAAM,UAAU,EAAE,KAAK,CAAC,KAAK,CAAC,IAAI,CAAuB,CAAA;AAEhE;;;;;GAKG;AACH,eAAO,MAAM,UAAU,EAAE,KAAK,CAAC,KAAK,CAAC,IAAI,CAAuB,CAAA"}

package/dist/BunPath.js

@@ -1,20 +1,32 @@
 /**
- * Bun layers for Effect's `Path` service.
- *
- * Use this module when an Effect program running on Bun needs path
- * manipulation from the `Path` service, such as joining and normalizing local
- * filesystem locations, resolving configuration or static asset paths, handling
- * CLI path arguments, or converting between filesystem paths and `file:` URLs.
- *
- * Bun exposes Node-compatible path behavior, so these layers reuse the shared
- * Node path implementation. The default `layer` follows the host operating
- * system's path rules, including separators, absolute paths, drive letters, and
- * UNC paths where applicable. Use `layerPosix` or `layerWin32` when code needs
- * stable POSIX or Windows semantics regardless of where Bun is running. These
- * layers only manipulate path strings; they do not read the filesystem, validate
- * that paths exist, or turn request URLs into safe local paths. `BunServices`
- * already includes the default Bun path layer, so provide this module directly
- * when you need only `Path` or one of the platform-specific variants.
+ * Bun-backed layers for Effect's {@link Path} service.
+ *
+ * This module provides the `Path` service for Bun programs by reusing the
+ * shared Node-compatible path implementation. Provide one of these layers when
+ * Bun code should receive path operations from the Effect environment instead
+ * of importing runtime path helpers directly.
+ *
+ * **Mental model**
+ *
+ * Bun exposes Node-compatible path and file URL behavior, so the default
+ * {@link layer} follows the host operating system's rules. The
+ * {@link layerPosix} and {@link layerWin32} variants pin parsing and formatting
+ * to POSIX or Windows semantics for portable tests, generated paths, and
+ * cross-platform tooling.
+ *
+ * **Common tasks**
+ *
+ * Use {@link layer} for normal Bun applications and CLIs. Use
+ * {@link layerPosix} or {@link layerWin32} when code must produce stable path
+ * syntax regardless of the machine running Bun. `BunServices.layer` already
+ * includes {@link layer}, so import this module directly when only `Path` or a
+ * fixed platform variant is needed.
+ *
+ * **Gotchas**
+ *
+ * Path operations are syntactic. They normalize and convert strings and
+ * `file:` URLs, but they do not read the filesystem, check permissions, confirm
+ * that a path exists, or make request URLs safe to use as local paths.
  *
  * @since 4.0.0
  */

package/dist/BunPath.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunPath.js","names":["NodePath","layer","layerPosix","layerWin32"],"sources":["../src/BunPath.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;AAoBA,OAAO,KAAKA,QAAQ,MAAM,uCAAuC;AAIjE;;;;;;AAMA,OAAO,MAAMC,KAAK,GAAsBD,QAAQ,CAACC,KAAK;AAEtD;;;;;;AAMA,OAAO,MAAMC,UAAU,GAAsBF,QAAQ,CAACE,UAAU;AAEhE;;;;;;AAMA,OAAO,MAAMC,UAAU,GAAsBH,QAAQ,CAACG,UAAU","ignoreList":[]}
+{"version":3,"file":"BunPath.js","names":["NodePath","layer","layerPosix","layerWin32"],"sources":["../src/BunPath.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAgCA,OAAO,KAAKA,QAAQ,MAAM,uCAAuC;AAIjE;;;;;;AAMA,OAAO,MAAMC,KAAK,GAAsBD,QAAQ,CAACC,KAAK;AAEtD;;;;;;AAMA,OAAO,MAAMC,UAAU,GAAsBF,QAAQ,CAACE,UAAU;AAEhE;;;;;;AAMA,OAAO,MAAMC,UAAU,GAAsBH,QAAQ,CAACG,UAAU","ignoreList":[]}

package/dist/BunRedis.d.ts

@@ -1,27 +1,36 @@
 /**
  * Bun Redis integration backed by Bun's built-in `RedisClient`.
  *
- * This module provides scoped layers that create a Bun `RedisClient` and expose
- * both the low-level `Redis` service used by Effect persistence modules and the
- * `BunRedis` service for direct access to the underlying client. Use it in Bun
- * applications that need Redis-backed persistence, persisted queues,
+ * This module creates scoped Bun `RedisClient` connections and exposes them as
+ * both the portable `Redis` service used by Effect persistence modules and the
+ * Bun-specific `BunRedis` service for direct access to the raw client. Use it in
+ * Bun applications that need Redis-backed persistence, persisted queues,
  * distributed rate limiting, custom Redis commands, or Bun Redis features such
- * as pub/sub through the raw client.
+ * as pub/sub.
  *
- * The client is acquired when the layer is built and closed with `close` when
- * the layer scope ends, so install the layer at the lifetime you want for the
- * connection and pass a Redis URL, Bun `RedisOptions`, or `layerConfig` for
- * connection settings. The portable `Redis` service sends ordinary commands
- * through `RedisClient.send`; pub/sub is available through `BunRedis.client`
- * or `BunRedis.use` and should normally use a separately scoped client so a
- * subscription does not interfere with command traffic used by persistence or
- * rate limiter stores.
+ * **Mental model**
  *
- * Persistence and rate limiter stores build keys and Lua scripts on top of this
- * service. Choose stable prefixes and store ids to avoid collisions, account
- * for persisted values that may fail to decode after schema changes, and avoid
- * unbounded high-cardinality rate-limit keys unless you have a cleanup or
- * bounding strategy.
+ * `layer` and `layerConfig` acquire one `RedisClient` for the layer scope. The
+ * same client backs the portable `Redis.Redis` command interface and the
+ * `BunRedis` service, and it is closed with `close` when the scope finalizes.
+ * Install the layer at the lifetime you want for that connection.
+ *
+ * **Common tasks**
+ *
+ * Pass a Redis URL or Bun `RedisOptions` to `layer` for direct configuration,
+ * or use `layerConfig` when connection settings should come from Effect
+ * configuration. Depend on `Redis.Redis` for persistence and rate limiter
+ * stores. Depend on `BunRedis` when you need `RedisClient` features that are
+ * not exposed by the portable service, including custom commands and pub/sub.
+ *
+ * **Gotchas**
+ *
+ * Pub/sub should normally use a separately scoped client so a subscription does
+ * not interfere with ordinary command traffic. Persistence and rate limiter
+ * stores build keys and Lua scripts on top of this service, so choose stable
+ * prefixes and store ids, account for persisted values that may fail to decode
+ * after schema changes, and avoid unbounded high-cardinality rate-limit keys
+ * without a cleanup or bounding strategy.
  *
  * @since 4.0.0
  */

package/dist/BunRedis.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunRedis.d.ts","sourceRoot":"","sources":["../src/BunRedis.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;GA0BG;AACH,OAAO,EAAE,WAAW,EAAE,KAAK,YAAY,EAAE,MAAM,KAAK,CAAA;AACpD,OAAO,KAAK,MAAM,MAAM,eAAe,CAAA;AACvC,OAAO,KAAK,OAAO,MAAM,gBAAgB,CAAA;AACzC,OAAO,KAAK,MAAM,MAAM,eAAe,CAAA;AAEvC,OAAO,KAAK,KAAK,MAAM,cAAc,CAAA;AAErC,OAAO,KAAK,KAAK,MAAM,mCAAmC,CAAA;;qBASvC,WAAW;kBACd,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,MAAM,EAAE,WAAW,KAAK,OAAO,CAAC,CAAC,CAAC,KAAK,MAAM,CAAC,MAAM,CAAC,CAAC,EAAE,KAAK,CAAC,UAAU,CAAC;;AARjG;;;;;GAKG;AACH,qBAAa,QAAS,SAAQ,aAGO;CAAG;AAmCxC;;;;;GAKG;AACH,eAAO,MAAM,KAAK,GAChB,UAAU,CAAC;IAAE,QAAQ,CAAC,GAAG,CAAC,EAAE,MAAM,CAAA;CAAE,GAAG,YAAY,CAAC,GAAG,SAAS,KAC/D,KAAK,CAAC,KAAK,CAAC,KAAK,CAAC,KAAK,GAAG,QAAQ,CAAuC,CAAA;AAE5E;;;;;GAKG;AACH,eAAO,MAAM,WAAW,GACtB,SAAS,MAAM,CAAC,IAAI,CAAC;IAAE,QAAQ,CAAC,GAAG,CAAC,EAAE,MAAM,CAAA;CAAE,GAAG,YAAY,CAAC,KAC7D,KAAK,CAAC,KAAK,CAAC,KAAK,CAAC,KAAK,GAAG,QAAQ,EAAE,MAAM,CAAC,WAAW,CAKtD,CAAA"}
+{"version":3,"file":"BunRedis.d.ts","sourceRoot":"","sources":["../src/BunRedis.ts"],"names":[],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAmCG;AACH,OAAO,EAAE,WAAW,EAAE,KAAK,YAAY,EAAE,MAAM,KAAK,CAAA;AACpD,OAAO,KAAK,MAAM,MAAM,eAAe,CAAA;AACvC,OAAO,KAAK,OAAO,MAAM,gBAAgB,CAAA;AACzC,OAAO,KAAK,MAAM,MAAM,eAAe,CAAA;AAEvC,OAAO,KAAK,KAAK,MAAM,cAAc,CAAA;AAErC,OAAO,KAAK,KAAK,MAAM,mCAAmC,CAAA;;qBASvC,WAAW;kBACd,CAAC,CAAC,EAAE,CAAC,EAAE,CAAC,MAAM,EAAE,WAAW,KAAK,OAAO,CAAC,CAAC,CAAC,KAAK,MAAM,CAAC,MAAM,CAAC,CAAC,EAAE,KAAK,CAAC,UAAU,CAAC;;AARjG;;;;;GAKG;AACH,qBAAa,QAAS,SAAQ,aAGO;CAAG;AAmCxC;;;;;GAKG;AACH,eAAO,MAAM,KAAK,GAChB,UAAU,CAAC;IAAE,QAAQ,CAAC,GAAG,CAAC,EAAE,MAAM,CAAA;CAAE,GAAG,YAAY,CAAC,GAAG,SAAS,KAC/D,KAAK,CAAC,KAAK,CAAC,KAAK,CAAC,KAAK,GAAG,QAAQ,CAAuC,CAAA;AAE5E;;;;;GAKG;AACH,eAAO,MAAM,WAAW,GACtB,SAAS,MAAM,CAAC,IAAI,CAAC;IAAE,QAAQ,CAAC,GAAG,CAAC,EAAE,MAAM,CAAA;CAAE,GAAG,YAAY,CAAC,KAC7D,KAAK,CAAC,KAAK,CAAC,KAAK,CAAC,KAAK,GAAG,QAAQ,EAAE,MAAM,CAAC,WAAW,CAKtD,CAAA"}

package/dist/BunRedis.js

@@ -1,27 +1,36 @@
 /**
  * Bun Redis integration backed by Bun's built-in `RedisClient`.
  *
- * This module provides scoped layers that create a Bun `RedisClient` and expose
- * both the low-level `Redis` service used by Effect persistence modules and the
- * `BunRedis` service for direct access to the underlying client. Use it in Bun
- * applications that need Redis-backed persistence, persisted queues,
+ * This module creates scoped Bun `RedisClient` connections and exposes them as
+ * both the portable `Redis` service used by Effect persistence modules and the
+ * Bun-specific `BunRedis` service for direct access to the raw client. Use it in
+ * Bun applications that need Redis-backed persistence, persisted queues,
  * distributed rate limiting, custom Redis commands, or Bun Redis features such
- * as pub/sub through the raw client.
+ * as pub/sub.
  *
- * The client is acquired when the layer is built and closed with `close` when
- * the layer scope ends, so install the layer at the lifetime you want for the
- * connection and pass a Redis URL, Bun `RedisOptions`, or `layerConfig` for
- * connection settings. The portable `Redis` service sends ordinary commands
- * through `RedisClient.send`; pub/sub is available through `BunRedis.client`
- * or `BunRedis.use` and should normally use a separately scoped client so a
- * subscription does not interfere with command traffic used by persistence or
- * rate limiter stores.
+ * **Mental model**
  *
- * Persistence and rate limiter stores build keys and Lua scripts on top of this
- * service. Choose stable prefixes and store ids to avoid collisions, account
- * for persisted values that may fail to decode after schema changes, and avoid
- * unbounded high-cardinality rate-limit keys unless you have a cleanup or
- * bounding strategy.
+ * `layer` and `layerConfig` acquire one `RedisClient` for the layer scope. The
+ * same client backs the portable `Redis.Redis` command interface and the
+ * `BunRedis` service, and it is closed with `close` when the scope finalizes.
+ * Install the layer at the lifetime you want for that connection.
+ *
+ * **Common tasks**
+ *
+ * Pass a Redis URL or Bun `RedisOptions` to `layer` for direct configuration,
+ * or use `layerConfig` when connection settings should come from Effect
+ * configuration. Depend on `Redis.Redis` for persistence and rate limiter
+ * stores. Depend on `BunRedis` when you need `RedisClient` features that are
+ * not exposed by the portable service, including custom commands and pub/sub.
+ *
+ * **Gotchas**
+ *
+ * Pub/sub should normally use a separately scoped client so a subscription does
+ * not interfere with ordinary command traffic. Persistence and rate limiter
+ * stores build keys and Lua scripts on top of this service, so choose stable
+ * prefixes and store ids, account for persisted values that may fail to decode
+ * after schema changes, and avoid unbounded high-cardinality rate-limit keys
+ * without a cleanup or bounding strategy.
  *
  * @since 4.0.0
  */

package/dist/BunRedis.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunRedis.js","names":["RedisClient","Config","Context","Effect","Fn","Layer","Scope","Redis","BunRedis","Service","make","fnUntraced","options","scope","addFinalizer","sync","client","close","url","use","f","tryPromise","try","catch","cause","RedisError","redis","send","command","args","bunRedis","identity","pipe","add","layer","effectContext","layerConfig","unwrap","flatMap"],"sources":["../src/BunRedis.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;AA2BA,SAASA,WAAW,QAA2B,KAAK;AACpD,OAAO,KAAKC,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,OAAO,MAAM,gBAAgB;AACzC,OAAO,KAAKC,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,EAAE,MAAM,iBAAiB;AACrC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,KAAK,MAAM,mCAAmC;AAE1D;;;;;;AAMA,OAAM,MAAOC,QAAS,sBAAQN,OAAO,CAACO,OAAO,EAGzC,CAAC,+BAA+B,CAAC;AAErC,MAAMC,IAAI,gBAAGP,MAAM,CAACQ,UAAU,CAAC,WAC7BC,OAEgB;EAEhB,MAAMC,KAAK,GAAG,OAAOV,MAAM,CAACU,KAAK;EACjC,OAAOP,KAAK,CAACQ,YAAY,CAACD,KAAK,EAAEV,MAAM,CAACY,IAAI,CAAC,MAAMC,MAAM,CAACC,KAAK,EAAE,CAAC,CAAC;EACnE,MAAMD,MAAM,GAAG,IAAIhB,WAAW,CAACY,OAAO,EAAEM,GAAG,EAAEN,OAAO,CAAC;EAErD,MAAMO,GAAG,GAAOC,CAAsC,IACpDjB,MAAM,CAACkB,UAAU,CAAC;IAChBC,GAAG,EAAEA,CAAA,KAAMF,CAAC,CAACJ,MAAM,CAAC;IACpBO,KAAK,EAAGC,KAAK,IAAK,IAAIjB,KAAK,CAACkB,UAAU,CAAC;MAAED;IAAK,CAAE;GACjD,CAAC;EAEJ,MAAME,KAAK,GAAG,OAAOnB,KAAK,CAACG,IAAI,CAAC;IAC9BiB,IAAI,EAAEA,CAAcC,OAAe,EAAE,GAAGC,IAA2B,KACjE1B,MAAM,CAACkB,UAAU,CAAC;MAChBC,GAAG,EAAEA,CAAA,KAAMN,MAAM,CAACW,IAAI,CAACC,OAAO,EAAEC,IAAqB,CAAe;MACpEN,KAAK,EAAGC,KAAK,IAAK,IAAIjB,KAAK,CAACkB,UAAU,CAAC;QAAED;MAAK,CAAE;KACjD;GACJ,CAAC;EAEF,MAAMM,QAAQ,GAAG1B,EAAE,CAAC2B,QAAQ,CAAsB;IAChDf,MAAM;IACNG;GACD,CAAC;EAEF,OAAOjB,OAAO,CAACQ,IAAI,CAACF,QAAQ,EAAEsB,QAAQ,CAAC,CAACE,IAAI,CAC1C9B,OAAO,CAAC+B,GAAG,CAAC1B,KAAK,CAACA,KAAK,EAAEmB,KAAK,CAAC,CAChC;AACH,CAAC,CAAC;AAEF;;;;;;AAMA,OAAO,MAAMQ,KAAK,GAChBtB,OAAgE,IACxBP,KAAK,CAAC8B,aAAa,CAACzB,IAAI,CAACE,OAAO,CAAC,CAAC;AAE5E;;;;;;AAMA,OAAO,MAAMwB,WAAW,GACtBxB,OAA8D,IAE9DP,KAAK,CAAC8B,aAAa,CACjBlC,MAAM,CAACoC,MAAM,CAACzB,OAAO,CAAC,CAACoB,IAAI,CACzB7B,MAAM,CAACmC,OAAO,CAAC5B,IAAI,CAAC,CACrB,CACF","ignoreList":[]}
+{"version":3,"file":"BunRedis.js","names":["RedisClient","Config","Context","Effect","Fn","Layer","Scope","Redis","BunRedis","Service","make","fnUntraced","options","scope","addFinalizer","sync","client","close","url","use","f","tryPromise","try","catch","cause","RedisError","redis","send","command","args","bunRedis","identity","pipe","add","layer","effectContext","layerConfig","unwrap","flatMap"],"sources":["../src/BunRedis.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAoCA,SAASA,WAAW,QAA2B,KAAK;AACpD,OAAO,KAAKC,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,OAAO,MAAM,gBAAgB;AACzC,OAAO,KAAKC,MAAM,MAAM,eAAe;AACvC,OAAO,KAAKC,EAAE,MAAM,iBAAiB;AACrC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,KAAK,MAAM,mCAAmC;AAE1D;;;;;;AAMA,OAAM,MAAOC,QAAS,sBAAQN,OAAO,CAACO,OAAO,EAGzC,CAAC,+BAA+B,CAAC;AAErC,MAAMC,IAAI,gBAAGP,MAAM,CAACQ,UAAU,CAAC,WAC7BC,OAEgB;EAEhB,MAAMC,KAAK,GAAG,OAAOV,MAAM,CAACU,KAAK;EACjC,OAAOP,KAAK,CAACQ,YAAY,CAACD,KAAK,EAAEV,MAAM,CAACY,IAAI,CAAC,MAAMC,MAAM,CAACC,KAAK,EAAE,CAAC,CAAC;EACnE,MAAMD,MAAM,GAAG,IAAIhB,WAAW,CAACY,OAAO,EAAEM,GAAG,EAAEN,OAAO,CAAC;EAErD,MAAMO,GAAG,GAAOC,CAAsC,IACpDjB,MAAM,CAACkB,UAAU,CAAC;IAChBC,GAAG,EAAEA,CAAA,KAAMF,CAAC,CAACJ,MAAM,CAAC;IACpBO,KAAK,EAAGC,KAAK,IAAK,IAAIjB,KAAK,CAACkB,UAAU,CAAC;MAAED;IAAK,CAAE;GACjD,CAAC;EAEJ,MAAME,KAAK,GAAG,OAAOnB,KAAK,CAACG,IAAI,CAAC;IAC9BiB,IAAI,EAAEA,CAAcC,OAAe,EAAE,GAAGC,IAA2B,KACjE1B,MAAM,CAACkB,UAAU,CAAC;MAChBC,GAAG,EAAEA,CAAA,KAAMN,MAAM,CAACW,IAAI,CAACC,OAAO,EAAEC,IAAqB,CAAe;MACpEN,KAAK,EAAGC,KAAK,IAAK,IAAIjB,KAAK,CAACkB,UAAU,CAAC;QAAED;MAAK,CAAE;KACjD;GACJ,CAAC;EAEF,MAAMM,QAAQ,GAAG1B,EAAE,CAAC2B,QAAQ,CAAsB;IAChDf,MAAM;IACNG;GACD,CAAC;EAEF,OAAOjB,OAAO,CAACQ,IAAI,CAACF,QAAQ,EAAEsB,QAAQ,CAAC,CAACE,IAAI,CAC1C9B,OAAO,CAAC+B,GAAG,CAAC1B,KAAK,CAACA,KAAK,EAAEmB,KAAK,CAAC,CAChC;AACH,CAAC,CAAC;AAEF;;;;;;AAMA,OAAO,MAAMQ,KAAK,GAChBtB,OAAgE,IACxBP,KAAK,CAAC8B,aAAa,CAACzB,IAAI,CAACE,OAAO,CAAC,CAAC;AAE5E;;;;;;AAMA,OAAO,MAAMwB,WAAW,GACtBxB,OAA8D,IAE9DP,KAAK,CAAC8B,aAAa,CACjBlC,MAAM,CAACoC,MAAM,CAACzB,OAAO,CAAC,CAACoB,IAAI,CACzB7B,MAAM,CAACmC,OAAO,CAAC5B,IAAI,CAAC,CACrB,CACF","ignoreList":[]}

package/dist/BunRuntime.d.ts

@@ -5,7 +5,7 @@ import type { Teardown } from "effect/Runtime";
  *
  * **When to use**
  *
- * Use this function to run an Effect as your application's main program,
+ * Use to run an Effect as your application's main program,
  * especially when you need structured error handling, log management,
  * interrupt support, or advanced teardown capabilities.
  *
@@ -31,7 +31,7 @@ export declare const runMain: {
      *
      * **When to use**
      *
-     * Use this function to run an Effect as your application's main program,
+     * Use to run an Effect as your application's main program,
      * especially when you need structured error handling, log management,
      * interrupt support, or advanced teardown capabilities.
      *
@@ -60,7 +60,7 @@ export declare const runMain: {
      *
      * **When to use**
      *
-     * Use this function to run an Effect as your application's main program,
+     * Use to run an Effect as your application's main program,
      * especially when you need structured error handling, log management,
      * interrupt support, or advanced teardown capabilities.
      *

package/dist/BunRuntime.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunRuntime.d.ts","sourceRoot":"","sources":["../src/BunRuntime.ts"],"names":[],"mappings":"AAoBA,OAAO,KAAK,EAAE,MAAM,EAAE,MAAM,eAAe,CAAA;AAC3C,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAA;AAE9C;;;;;;;;;;;;;;;;;;;;;;;;GAwBG;AACH,eAAO,MAAM,OAAO,EAAE;IACpB;;;;;;;;;;;;;;;;;;;;;;;;OAwBG;IACH,CACE,OAAO,CAAC,EAAE;QACR,QAAQ,CAAC,qBAAqB,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;QACpD,QAAQ,CAAC,QAAQ,CAAC,EAAE,QAAQ,GAAG,SAAS,CAAA;KACzC,GACA,CAAC,CAAC,EAAE,CAAC,EAAE,MAAM,EAAE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,IAAI,CAAA;IACvC;;;;;;;;;;;;;;;;;;;;;;;;OAwBG;IACH,CAAC,CAAC,EAAE,CAAC,EACH,MAAM,EAAE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,EACpB,OAAO,CAAC,EAAE;QACR,QAAQ,CAAC,qBAAqB,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;QACpD,QAAQ,CAAC,QAAQ,CAAC,EAAE,QAAQ,GAAG,SAAS,CAAA;KACzC,GACA,IAAI,CAAA;CACc,CAAA"}
+{"version":3,"file":"BunRuntime.d.ts","sourceRoot":"","sources":["../src/BunRuntime.ts"],"names":[],"mappings":"AAiCA,OAAO,KAAK,EAAE,MAAM,EAAE,MAAM,eAAe,CAAA;AAC3C,OAAO,KAAK,EAAE,QAAQ,EAAE,MAAM,gBAAgB,CAAA;AAE9C;;;;;;;;;;;;;;;;;;;;;;;;GAwBG;AACH,eAAO,MAAM,OAAO,EAAE;IACpB;;;;;;;;;;;;;;;;;;;;;;;;OAwBG;IACH,CACE,OAAO,CAAC,EAAE;QACR,QAAQ,CAAC,qBAAqB,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;QACpD,QAAQ,CAAC,QAAQ,CAAC,EAAE,QAAQ,GAAG,SAAS,CAAA;KACzC,GACA,CAAC,CAAC,EAAE,CAAC,EAAE,MAAM,EAAE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,KAAK,IAAI,CAAA;IACvC;;;;;;;;;;;;;;;;;;;;;;;;OAwBG;IACH,CAAC,CAAC,EAAE,CAAC,EACH,MAAM,EAAE,MAAM,CAAC,CAAC,EAAE,CAAC,CAAC,EACpB,OAAO,CAAC,EAAE;QACR,QAAQ,CAAC,qBAAqB,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;QACpD,QAAQ,CAAC,QAAQ,CAAC,EAAE,QAAQ,GAAG,SAAS,CAAA;KACzC,GACA,IAAI,CAAA;CACc,CAAA"}

package/dist/BunRuntime.js

@@ -1,19 +1,32 @@
 /**
- * Bun entry-point helpers for running Effect programs.
- *
- * This module exposes `runMain`, the Bun runtime launcher used at the edge of
- * CLIs, scripts, servers, and worker processes. It runs an already
- * self-contained Effect as the process main program, using the shared
- * Node-compatible runtime implementation for error reporting, teardown, and
- * `process` signal handling available in Bun.
- *
- * `BunRuntime` does not provide application services by itself. Provide any
- * required layers, such as `BunServices.layer` or narrower service-specific
- * layers, before passing the effect to `runMain`. On `SIGINT` or `SIGTERM`,
- * the main fiber is interrupted so scoped resources and finalizers can shut
- * down; keep long-running servers, workers, and subscriptions attached to that
- * scope and avoid finalizers that never complete, otherwise process shutdown
- * can be delayed.
+ * Bun process runner for Effect programs.
+ *
+ * This module exposes Bun's `runMain` entry point. It is the function to call
+ * at the outer edge of a Bun CLI, script, server, or worker when a single
+ * Effect should become the process main fiber and use Bun's Node-compatible
+ * process, signal, and teardown behavior.
+ *
+ * **Mental model**
+ *
+ * `runMain` delegates to the shared Node-compatible runner. It starts the
+ * supplied Effect as the process root, reports failures through the configured
+ * runtime reporting, and translates `SIGINT` or `SIGTERM` into interruption so
+ * scoped resources can finalize before teardown chooses an exit code.
+ *
+ * **Common tasks**
+ *
+ * - Launch a Bun CLI or one-off script from an Effect.
+ * - Start a long-running Bun server or worker under an Effect scope.
+ * - Customize error reporting or teardown with `runMain` options.
+ * - Provide `BunServices.layer` or narrower layers before calling `runMain`.
+ *
+ * **Gotchas**
+ *
+ * This module runs the program; it does not provide filesystem, network,
+ * terminal, or other platform services. Long-lived servers, subscriptions, and
+ * worker loops should be acquired in Effect scopes so interruption from process
+ * signals can release them. Finalizers that never complete can keep shutdown
+ * waiting.
  *
  * @since 4.0.0
  */
@@ -23,7 +36,7 @@ import * as NodeRuntime from "@effect/platform-node-shared/NodeRuntime";
  *
  * **When to use**
  *
- * Use this function to run an Effect as your application's main program,
+ * Use to run an Effect as your application's main program,
  * especially when you need structured error handling, log management,
  * interrupt support, or advanced teardown capabilities.
  *

package/dist/BunRuntime.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunRuntime.js","names":["NodeRuntime","runMain"],"sources":["../src/BunRuntime.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;AAmBA,OAAO,KAAKA,WAAW,MAAM,0CAA0C;AAIvE;;;;;;;;;;;;;;;;;;;;;;;;;AAyBA,OAAO,MAAMC,OAAO,GAgEhBD,WAAW,CAACC,OAAO","ignoreList":[]}
+{"version":3,"file":"BunRuntime.js","names":["NodeRuntime","runMain"],"sources":["../src/BunRuntime.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAgCA,OAAO,KAAKA,WAAW,MAAM,0CAA0C;AAIvE;;;;;;;;;;;;;;;;;;;;;;;;;AAyBA,OAAO,MAAMC,OAAO,GAgEhBD,WAAW,CAACC,OAAO","ignoreList":[]}

package/dist/BunStdio.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunStdio.d.ts","sourceRoot":"","sources":["../src/BunStdio.ts"],"names":[],"mappings":"AAsBA,OAAO,KAAK,KAAK,KAAK,MAAM,cAAc,CAAA;AAC1C,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,cAAc,CAAA;AAEzC;;;;;;GAMG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,KAAK,CAAC,KAAK,CAAmB,CAAA"}
+{"version":3,"file":"BunStdio.d.ts","sourceRoot":"","sources":["../src/BunStdio.ts"],"names":[],"mappings":"AAkCA,OAAO,KAAK,KAAK,KAAK,MAAM,cAAc,CAAA;AAC1C,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,cAAc,CAAA;AAEzC;;;;;;GAMG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,KAAK,CAAC,KAAK,CAAmB,CAAA"}

package/dist/BunStdio.js

@@ -1,21 +1,33 @@
 /**
- * Bun-backed implementation of Effect's `Stdio` service.
+ * Process stdio for Bun applications.
  *
- * This module provides the process stdio layer for Bun applications by reusing
- * the shared Node-compatible implementation. The layer connects `Stdio` to the
- * current Bun process: arguments come from `process.argv`, input is read from
- * `process.stdin`, and output and error output write to `process.stdout` and
- * `process.stderr`. It is intended for CLIs, scripts, command runners, test
- * harnesses, and other process-oriented programs that need standard input and
- * output through Effect services.
+ * This module provides the Bun layer for Effect's `Stdio` service by adapting
+ * the current process arguments and standard streams. Arguments come from
+ * `process.argv`, input is read from `process.stdin`, and output and error
+ * output write to `process.stdout` and `process.stderr`.
+ *
+ * **Mental model**
+ *
+ * `BunStdio.layer` is a thin Bun-facing wrapper around the shared
+ * Node-compatible stdio implementation. It does not create private streams for
+ * an application; it exposes the global streams owned by the running Bun
+ * process through the `Stdio` service.
+ *
+ * **Common tasks**
+ *
+ * - Provide `Stdio` for Bun CLIs, scripts, command runners, and tests.
+ * - Read process arguments or standard input through Effect services.
+ * - Write normal output and diagnostics without depending directly on
+ *   `process.stdout` or `process.stderr`.
+ *
+ * **Gotchas**
  *
- * The underlying stdio streams are global resources owned by the Bun process.
  * The layer keeps stdin open and does not end stdout or stderr by default,
  * which avoids closing handles that prompts, loggers, or other code may still
  * use. Stdio may be attached to a TTY, pipe, or redirected file, so
  * terminal-specific behavior such as raw mode, echo, colors, cursor control,
- * and terminal dimensions should be coordinated with terminal APIs rather than
- * assumed from this layer.
+ * and terminal dimensions should be handled with terminal APIs such as
+ * `BunTerminal`, not inferred from this layer.
  *
  * @since 4.0.0
  */

package/dist/BunStdio.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunStdio.js","names":["NodeStdio","layer"],"sources":["../src/BunStdio.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;AAqBA,OAAO,KAAKA,SAAS,MAAM,wCAAwC;AAInE;;;;;;;AAOA,OAAO,MAAMC,KAAK,GAAuBD,SAAS,CAACC,KAAK","ignoreList":[]}
+{"version":3,"file":"BunStdio.js","names":["NodeStdio","layer"],"sources":["../src/BunStdio.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAiCA,OAAO,KAAKA,SAAS,MAAM,wCAAwC;AAInE;;;;;;;AAOA,OAAO,MAAMC,KAAK,GAAuBD,SAAS,CAACC,KAAK","ignoreList":[]}

package/dist/BunStream.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunStream.d.ts","sourceRoot":"","sources":["../src/BunStream.ts"],"names":[],"mappings":"AA4BA,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,iBAAiB,CAAA;AAG9C,OAAO,KAAK,MAAM,MAAM,eAAe,CAAA;AAEvC;;GAEG;AACH,cAAc,yCAAyC,CAAA;AAEvD;;;;;;GAMG;AACH,eAAO,MAAM,kBAAkB,GAAI,CAAC,EAAE,CAAC,EACrC,SAAS;IACP,QAAQ,CAAC,QAAQ,EAAE,OAAO,CAAC,cAAc,CAAC,CAAC,CAAC,CAAC,CAAA;IAC7C,QAAQ,CAAC,OAAO,EAAE,CAAC,KAAK,EAAE,OAAO,KAAK,CAAC,CAAA;IACvC,QAAQ,CAAC,gBAAgB,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;CAChD,KACA,MAAM,CAAC,MAAM,CAAC,CAAC,EAAE,CAAC,CA6Bf,CAAA"}
+{"version":3,"file":"BunStream.d.ts","sourceRoot":"","sources":["../src/BunStream.ts"],"names":[],"mappings":"AAqCA,OAAO,KAAK,EAAE,OAAO,EAAE,MAAM,iBAAiB,CAAA;AAG9C,OAAO,KAAK,MAAM,MAAM,eAAe,CAAA;AAEvC;;GAEG;AACH,cAAc,yCAAyC,CAAA;AAEvD;;;;;;GAMG;AACH,eAAO,MAAM,kBAAkB,GAAI,CAAC,EAAE,CAAC,EACrC,SAAS;IACP,QAAQ,CAAC,QAAQ,EAAE,OAAO,CAAC,cAAc,CAAC,CAAC,CAAC,CAAC,CAAA;IAC7C,QAAQ,CAAC,OAAO,EAAE,CAAC,KAAK,EAAE,OAAO,KAAK,CAAC,CAAA;IACvC,QAAQ,CAAC,gBAAgB,CAAC,EAAE,OAAO,GAAG,SAAS,CAAA;CAChD,KACA,MAAM,CAAC,MAAM,CAAC,CAAC,EAAE,CAAC,CA6Bf,CAAA"}

package/dist/BunStream.js

@@ -1,24 +1,33 @@
 /**
  * Bun stream interoperability for Effect streams.
  *
- * This module provides Bun-specific adapters for working with streaming data at
- * the boundary between Bun APIs and Effect. It re-exports the shared Node stream
- * adapters for Bun's Node-compatible stream APIs, and adds an optimized
- * `ReadableStream` constructor that uses Bun's `readMany` support to pull
- * batches of Web Stream values into an Effect `Stream`.
+ * This module is the Bun entry point for adapting runtime streams into Effect's
+ * streaming model. It re-exports the shared Node stream adapters for Bun's
+ * Node-compatible stream APIs and adds {@link fromReadableStream}, a Web
+ * `ReadableStream` adapter that uses Bun's `readMany` reader method to pull
+ * batches of values into an Effect `Stream`.
  *
- * Common uses include adapting Bun `Request` and `Response` bodies, multipart
- * uploads, and other Web `ReadableStream` sources so they can be transformed,
- * decoded, or piped with Effect stream operators. Pulling from the Effect stream
- * drives reads from the underlying reader, while Bun and the Web Streams runtime
- * still control their own internal buffering and source backpressure.
+ * **Mental model**
  *
- * Web `ReadableStream` readers take an exclusive lock on the source. Request and
- * response bodies are also one-shot: once consumed they become disturbed and
- * should not be read through another API. The adapter cancels the reader when
- * the consuming scope is finalized by default; set `releaseLockOnEnd` when the
- * stream is externally owned and should only have its lock released. Read errors
- * are mapped through the provided `onError` function.
+ * Consuming the returned `Stream` drives reads from the underlying
+ * `ReadableStreamDefaultReader`. Each pull asks Bun for the next batch, empty
+ * batches are skipped, read failures are translated with `onError`, and the
+ * reader is finalized with the surrounding Effect scope.
+ *
+ * **Common tasks**
+ *
+ * Use {@link fromReadableStream} for Bun `Request` and `Response` bodies,
+ * multipart uploads, and other Web stream sources that should be transformed,
+ * decoded, or piped with Effect stream operators. Use the re-exported Node
+ * stream adapters for APIs that expose Bun's Node-compatible `stream` types.
+ *
+ * **Gotchas**
+ *
+ * Web stream readers hold an exclusive lock. Request and response bodies are
+ * also one-shot; once consumed they are disturbed and should not be read through
+ * another API. By default finalization cancels the reader; set
+ * `releaseLockOnEnd` when the stream is externally owned and only the reader
+ * lock should be released.
  *
  * @since 4.0.0
  */

package/dist/BunStream.js.map

@@ -1 +1 @@
-{"version":3,"file":"BunStream.js","names":["Arr","Cause","Channel","Effect","Scope","Stream","fromReadableStream","options","fromChannel","fromTransform","fnUntraced","_","scope","reader","evaluate","getReader","addFinalizer","releaseLockOnEnd","sync","releaseLock","promise","cancel","readMany","callback","resume","result","then","succeed","e","fail","onError","flatMap","loop","done","value","isReadonlyArrayNonEmpty"],"sources":["../src/BunStream.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;AAwBA,OAAO,KAAKA,GAAG,MAAM,cAAc;AACnC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,OAAO,MAAM,gBAAgB;AACzC,OAAO,KAAKC,MAAM,MAAM,eAAe;AAGvC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,MAAM,MAAM,eAAe;AAEvC;;;AAGA,cAAc,yCAAyC;AAEvD;;;;;;;AAOA,OAAO,MAAMC,kBAAkB,GAC7BC,OAIC,IAEDF,MAAM,CAACG,WAAW,CAACN,OAAO,CAACO,aAAa,CAACN,MAAM,CAACO,UAAU,CAAC,WAAUC,CAAC,EAAEC,KAAK;EAC3E,MAAMC,MAAM,GAAGN,OAAO,CAACO,QAAQ,EAAE,CAACC,SAAS,EAAE;EAC7C,OAAOX,KAAK,CAACY,YAAY,CACvBJ,KAAK,EACLL,OAAO,CAACU,gBAAgB,GAAGd,MAAM,CAACe,IAAI,CAAC,MAAML,MAAM,CAACM,WAAW,EAAE,CAAC,GAAGhB,MAAM,CAACiB,OAAO,CAAC,MAAMP,MAAM,CAACQ,MAAM,EAAE,CAAC,CAC3G;EACD,MAAMC,QAAQ,GAAGnB,MAAM,CAACoB,QAAQ,CAAiDC,MAAM,IAAI;IACzF,MAAMC,MAAM,GAAGZ,MAAM,CAACS,QAAQ,EAAE;IAChC,IAAI,MAAM,IAAIG,MAAM,EAAE;MACpBA,MAAM,CAACC,IAAI,CAAEf,CAAC,IAAKa,MAAM,CAACrB,MAAM,CAACwB,OAAO,CAAChB,CAAC,CAAC,CAAC,EAAGiB,CAAC,IAAKJ,MAAM,CAACrB,MAAM,CAAC0B,IAAI,CAACtB,OAAO,CAACuB,OAAO,CAACF,CAAC,CAAC,CAAC,CAAC,CAAC;IAC/F,CAAC,MAAM;MACLJ,MAAM,CAACrB,MAAM,CAACwB,OAAO,CAACF,MAAM,CAAC,CAAC;IAChC;EACF,CAAC,CAAC;EACF;EACA,OAAOtB,MAAM,CAAC4B,OAAO,CACnBT,QAAQ,EACR,SAASU,IAAIA,CACX;IAAEC,IAAI;IAAEC;EAAK,CAAE;IAEf,IAAID,IAAI,EAAE;MACR,OAAOhC,KAAK,CAACgC,IAAI,EAAE;IACrB,CAAC,MAAM,IAAI,CAACjC,GAAG,CAACmC,uBAAuB,CAACD,KAAK,CAAC,EAAE;MAC9C,OAAO/B,MAAM,CAAC4B,OAAO,CAACT,QAAQ,EAAEU,IAAI,CAAC;IACvC;IACA,OAAO7B,MAAM,CAACwB,OAAO,CAACO,KAAK,CAAC;EAC9B,CAAC,CACF;AACH,CAAC,CAAC,CAAC,CAAC","ignoreList":[]}
+{"version":3,"file":"BunStream.js","names":["Arr","Cause","Channel","Effect","Scope","Stream","fromReadableStream","options","fromChannel","fromTransform","fnUntraced","_","scope","reader","evaluate","getReader","addFinalizer","releaseLockOnEnd","sync","releaseLock","promise","cancel","readMany","callback","resume","result","then","succeed","e","fail","onError","flatMap","loop","done","value","isReadonlyArrayNonEmpty"],"sources":["../src/BunStream.ts"],"sourcesContent":[null],"mappings":"AAAA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;AAiCA,OAAO,KAAKA,GAAG,MAAM,cAAc;AACnC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,OAAO,MAAM,gBAAgB;AACzC,OAAO,KAAKC,MAAM,MAAM,eAAe;AAGvC,OAAO,KAAKC,KAAK,MAAM,cAAc;AACrC,OAAO,KAAKC,MAAM,MAAM,eAAe;AAEvC;;;AAGA,cAAc,yCAAyC;AAEvD;;;;;;;AAOA,OAAO,MAAMC,kBAAkB,GAC7BC,OAIC,IAEDF,MAAM,CAACG,WAAW,CAACN,OAAO,CAACO,aAAa,CAACN,MAAM,CAACO,UAAU,CAAC,WAAUC,CAAC,EAAEC,KAAK;EAC3E,MAAMC,MAAM,GAAGN,OAAO,CAACO,QAAQ,EAAE,CAACC,SAAS,EAAE;EAC7C,OAAOX,KAAK,CAACY,YAAY,CACvBJ,KAAK,EACLL,OAAO,CAACU,gBAAgB,GAAGd,MAAM,CAACe,IAAI,CAAC,MAAML,MAAM,CAACM,WAAW,EAAE,CAAC,GAAGhB,MAAM,CAACiB,OAAO,CAAC,MAAMP,MAAM,CAACQ,MAAM,EAAE,CAAC,CAC3G;EACD,MAAMC,QAAQ,GAAGnB,MAAM,CAACoB,QAAQ,CAAiDC,MAAM,IAAI;IACzF,MAAMC,MAAM,GAAGZ,MAAM,CAACS,QAAQ,EAAE;IAChC,IAAI,MAAM,IAAIG,MAAM,EAAE;MACpBA,MAAM,CAACC,IAAI,CAAEf,CAAC,IAAKa,MAAM,CAACrB,MAAM,CAACwB,OAAO,CAAChB,CAAC,CAAC,CAAC,EAAGiB,CAAC,IAAKJ,MAAM,CAACrB,MAAM,CAAC0B,IAAI,CAACtB,OAAO,CAACuB,OAAO,CAACF,CAAC,CAAC,CAAC,CAAC,CAAC;IAC/F,CAAC,MAAM;MACLJ,MAAM,CAACrB,MAAM,CAACwB,OAAO,CAACF,MAAM,CAAC,CAAC;IAChC;EACF,CAAC,CAAC;EACF;EACA,OAAOtB,MAAM,CAAC4B,OAAO,CACnBT,QAAQ,EACR,SAASU,IAAIA,CACX;IAAEC,IAAI;IAAEC;EAAK,CAAE;IAEf,IAAID,IAAI,EAAE;MACR,OAAOhC,KAAK,CAACgC,IAAI,EAAE;IACrB,CAAC,MAAM,IAAI,CAACjC,GAAG,CAACmC,uBAAuB,CAACD,KAAK,CAAC,EAAE;MAC9C,OAAO/B,MAAM,CAAC4B,OAAO,CAACT,QAAQ,EAAEU,IAAI,CAAC;IACvC;IACA,OAAO7B,MAAM,CAACwB,OAAO,CAACO,KAAK,CAAC;EAC9B,CAAC,CACF;AACH,CAAC,CAAC,CAAC,CAAC","ignoreList":[]}

package/dist/BunTerminal.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"BunTerminal.d.ts","sourceRoot":"","sources":["../src/BunTerminal.ts"],"names":[],"mappings":"AAkBA,OAAO,KAAK,EAAE,MAAM,EAAE,MAAM,eAAe,CAAA;AAC3C,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,cAAc,CAAA;AACzC,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,cAAc,CAAA;AACzC,OAAO,KAAK,EAAE,QAAQ,EAAE,SAAS,EAAE,MAAM,iBAAiB,CAAA;AAE1D;;;;;;GAMG;AACH,eAAO,MAAM,IAAI,EAAE,CAAC,UAAU,CAAC,EAAE,CAAC,KAAK,EAAE,SAAS,KAAK,OAAO,KAAK,MAAM,CAAC,QAAQ,EAAE,KAAK,EAAE,KAAK,CAAqB,CAAA;AAErH;;;;;;GAMG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAsB,CAAA"}
+{"version":3,"file":"BunTerminal.d.ts","sourceRoot":"","sources":["../src/BunTerminal.ts"],"names":[],"mappings":"AAoCA,OAAO,KAAK,EAAE,MAAM,EAAE,MAAM,eAAe,CAAA;AAC3C,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,cAAc,CAAA;AACzC,OAAO,KAAK,EAAE,KAAK,EAAE,MAAM,cAAc,CAAA;AACzC,OAAO,KAAK,EAAE,QAAQ,EAAE,SAAS,EAAE,MAAM,iBAAiB,CAAA;AAE1D;;;;;;GAMG;AACH,eAAO,MAAM,IAAI,EAAE,CAAC,UAAU,CAAC,EAAE,CAAC,KAAK,EAAE,SAAS,KAAK,OAAO,KAAK,MAAM,CAAC,QAAQ,EAAE,KAAK,EAAE,KAAK,CAAqB,CAAA;AAErH;;;;;;GAMG;AACH,eAAO,MAAM,KAAK,EAAE,KAAK,CAAC,QAAQ,CAAsB,CAAA"}

package/dist/BunTerminal.js

@@ -1,17 +1,35 @@
 /**
  * Bun-backed implementation of Effect's `Terminal` service.
  *
- * This module provides a scoped, process-backed terminal for Bun programs by
- * adapting the runtime's Node-compatible stdin, stdout, and `readline` support.
- * It is useful for CLIs, prompts, REPLs, and terminal interfaces that need
- * prompt output, line input, keypress input, or terminal dimensions.
- *
- * The service uses the current process streams, so acquire it with a scope or
- * provide `layer` to ensure cleanup. When stdin is attached to a TTY, raw mode
- * is enabled while the terminal is active and restored when the scope closes;
- * this changes how keys are delivered and can affect other consumers of stdin.
- * In pipes, redirected input, or CI, raw mode may be unavailable, keypress input
- * is limited, and stdout dimensions may be reported as zero.
+ * This module adapts Bun's Node-compatible `stdin`, `stdout`, and `readline`
+ * support into a scoped `Terminal` service. It is intended for Bun CLIs,
+ * prompts, REPLs, and terminal interfaces that need prompt output, line input,
+ * keypress input, or terminal dimensions through Effect services.
+ *
+ * **Mental model**
+ *
+ * - {@link make} creates a scoped terminal from the current process streams.
+ * - {@link layer} provides the default live terminal service for Bun programs.
+ * - The implementation reuses the shared Node-compatible terminal adapter, so
+ *   behavior follows the capabilities of Bun's process streams and readline
+ *   support.
+ *
+ * **Common tasks**
+ *
+ * - Provide terminal access at the edge of a Bun CLI with {@link layer}.
+ * - Customize which key ends keypress input by calling {@link make} directly.
+ * - Read lines, read keypresses, display prompts, and inspect terminal size
+ *   through the `Terminal` service once it is provided.
+ *
+ * **Gotchas**
+ *
+ * - The service uses global process streams. Acquire it with a scope, or
+ *   provide {@link layer}, so raw mode and readline listeners are cleaned up.
+ * - When `stdin` is a TTY, raw mode is enabled while the terminal is active and
+ *   restored when the scope closes; this changes how keys are delivered and can
+ *   affect other stdin consumers.
+ * - In pipes, redirected input, or CI, raw mode may be unavailable, keypress
+ *   input is limited, and stdout dimensions may be reported as zero.
  *
  * @since 4.0.0
  */