@dreamerbird/camera-studio 0.0.0-stage → 0.1.0

package/dist/agent/commands/bindings.realStudio.test.js

@@ -0,0 +1,281 @@
+/* eslint-disable import/no-extraneous-dependencies */
+/**
+ * 绑定/父级切换命令的撤销取证(2026-10-19,F1 修复):
+ * anchors.setParent / anchors.clearParent / cameras.unbindPath /
+ * cameras.setAimTarget(解除)必须把「属性 + 坐标定格」折进同一事务——
+ * 否则组件看护 effect 会再补一笔定格提交,两步撤销,undo 一次只回属性
+ * 不回定格,对象跳变(撤销陷阱,同 removeAnchor/removePathFromRegistry
+ * 注释)。
+ *
+ * 本文件用真实 Studio(同 keyframes.realStudio.test.ts 的引导方式)+
+ * 真实 three 节点(登记进 aimTargets/pathRuntime/objectRuntime 运行时表,
+ * 模拟组件已挂载)验证:
+ *   1. 命令只产生一个撤销步骤(undoStack +1);
+ *   2. 定格值正确:持久 position/rotation == 命令时刻的世界坐标换算;
+ *   3. 一次 undo 同时回退属性与定格;
+ *   4. 看守卫 no-op 前提:模拟包装器应用持久值后,节点世界坐标 == 命令前
+ *      世界坐标(看护 effect 的同值守卫据此跳过提交)。
+ *
+ * 与 anchors.test.ts / cameras.test.ts(假事务,验写入形状)互补。
+ */
+import '@dreamerbird/studio';
+import theatre, { getProject, types as t, val } from '@dreamerbird/core';
+import { globals } from '@dreamerbird/core/globals';
+import getStudio from '@dreamerbird/studio/getStudio';
+import { getCoreTicker } from '@dreamerbird/core/coreTicker';
+import { Group, Object3D, Vector3 } from 'three';
+import { registerAnchorHome, registerAnchorObject } from '../../aimTargets';
+import { ANCHORS_REGISTRY_KEY } from '../../anchorsRegistry';
+import { CAMERAS_REGISTRY_KEY, registerShotCameraObject, } from '../../cameraRegistry';
+import { AgentCommandRegistry } from '../registry';
+import { createAgentRuntime } from '../runtime';
+import * as objectRuntime from '../runtime/objectRuntime';
+import { registerPathSampler } from '../runtime/pathRuntime';
+import { registerAnchorCommands } from './anchors';
+import { registerCameraCommands } from './cameras';
+const studio = getStudio();
+void theatre.init({ studio: true, usePersistentStorage: false });
+let projectSeq = 0;
+const ctx = () => ({
+    requestId: 'test',
+    signal: new AbortController().signal,
+});
+/** 探 saaz 撤销栈(私有路径,同 keyframes.realStudio.test.ts 的取证方式) */
+const undoStackOf = () => {
+    const s = studio;
+    const saaz = (s._store?._saaz ?? s._saaz);
+    return saaz?._atom?.get?.()?.undoRedo?.stack ?? [];
+};
+const vec3 = (v) => v;
+const expectVec3Close = (actual, expected) => {
+    expect(actual.x).toBeCloseTo(expected.x, 5);
+    expect(actual.y).toBeCloseTo(expected.y, 5);
+    expect(actual.z).toBeCloseTo(expected.z, 5);
+};
+const cleanups = [];
+afterEach(() => {
+    while (cleanups.length)
+        cleanups.pop()();
+});
+function setup() {
+    const project = getProject(`agent-bindings-real-${++projectSeq}`, {
+        state: {
+            definitionVersion: globals.currentProjectStateDefinitionVersion,
+            sheetsById: {
+                Scene: {
+                    staticOverrides: { byObject: {} },
+                    sequence: {
+                        type: 'PositionalSequence',
+                        length: 10,
+                        subUnitsPerUnit: 30,
+                        tracksByObject: {},
+                    },
+                },
+            },
+        },
+    });
+    getCoreTicker().tick();
+    const sheet = project.sheet('Scene');
+    const runtime = createAgentRuntime({
+        project,
+        sheet,
+        library: {},
+        getStudio: () => studio,
+        subscribeHistoric: () => () => { },
+    });
+    const registry = new AgentCommandRegistry();
+    registerAnchorCommands(registry, runtime);
+    registerCameraCommands(registry, runtime);
+    const anchorKeys = [];
+    const cameraEntries = [];
+    /** 注册表清单落账(命令的存在性底账读它;同生产的 add*ToRegistry) */
+    function flushRegistries() {
+        const anchorsRegistry = sheet.object(ANCHORS_REGISTRY_KEY, { list: t.string('[]') }, { hideFromOutline: true });
+        anchorsRegistry.initialValue = { list: JSON.stringify(anchorKeys) };
+        const camerasRegistry = sheet.object(CAMERAS_REGISTRY_KEY, { list: t.string('[]') }, { hideFromOutline: true });
+        camerasRegistry.initialValue = { list: JSON.stringify(cameraEntries) };
+    }
+    /** 锚点 SheetObject + three 节点 + 双登记(模拟 AnchorObject 已挂载) */
+    function mountAnchor(key, node, initial) {
+        const obj = sheet.object(key, {
+            position: t.compound({ x: t.number(0), y: t.number(0), z: t.number(0) }),
+            parent: t.string(''),
+        });
+        obj.initialValue = initial;
+        anchorKeys.push(key);
+        const id = `anchor:${key}`;
+        objectRuntime.registerSceneSheetObject(id, obj);
+        registerAnchorObject(key, node);
+        cleanups.push(() => {
+            objectRuntime.unregisterSceneSheetObject(id, obj);
+            registerAnchorObject(key, null);
+        });
+        return obj;
+    }
+    /** 相机 SheetObject + three 相机 + 双登记(模拟 ShotCamera 已挂载) */
+    function mountCamera(key, cam, initial) {
+        const obj = sheet.object(key, {
+            position: t.compound({ x: t.number(0), y: t.number(0), z: t.number(0) }),
+            rotation: t.compound({ x: t.number(0), y: t.number(0), z: t.number(0) }),
+            aimTarget: t.string(''),
+            pathKey: t.string(''),
+        });
+        obj.initialValue = initial;
+        cameraEntries.push({ cameraKey: key });
+        const id = `camera:${key}`;
+        objectRuntime.registerSceneSheetObject(id, obj);
+        registerShotCameraObject(key, cam);
+        cleanups.push(() => {
+            objectRuntime.unregisterSceneSheetObject(id, obj);
+            registerShotCameraObject(key, null);
+        });
+        return obj;
+    }
+    const home = new Group();
+    registerAnchorHome(home);
+    cleanups.push(() => registerAnchorHome(null));
+    return {
+        project,
+        sheet,
+        registry,
+        home,
+        mountAnchor,
+        mountCamera,
+        flushRegistries,
+    };
+}
+test('anchors.setParent:parent 与局部偏移定格一步撤销;undo 同时回退;世界坐标不跳', async () => {
+    const { project, registry, home, mountAnchor, flushRegistries } = setup();
+    await project.ready;
+    // Anchor 1 在娘家下,世界坐标 (1,2,3);Anchor 2(父级)在 (10,0,0)
+    const nodeA = new Object3D();
+    nodeA.position.set(1, 2, 3);
+    home.add(nodeA);
+    const nodeB = new Object3D();
+    nodeB.position.set(10, 0, 0);
+    const objA = mountAnchor('Anchor 1', nodeA, { position: { x: 1, y: 2, z: 3 } });
+    mountAnchor('Anchor 2', nodeB, { position: { x: 10, y: 0, z: 0 } });
+    flushRegistries();
+    const worldBefore = nodeA.getWorldPosition(new Vector3()).clone();
+    const stackBefore = undoStackOf().length;
+    await registry.execute('anchors.setParent', { objectId: 'anchor:Anchor 1', parent: 'anchor:Anchor 2' }, ctx());
+    // 一步撤销;持久值 = parent + 局部偏移定格(-9,2,3)
+    expect(undoStackOf().length).toBe(stackBefore + 1);
+    expect(val(objA.props.parent)).toBe('anchor:Anchor 2');
+    expectVec3Close(vec3(val(objA.props.position)), { x: -9, y: 2, z: 3 });
+    // 同步换父:包装器应用局部偏移前节点已在新父之下
+    expect(nodeA.parent).toBe(nodeB);
+    // 看护 no-op 前提:模拟包装器应用持久值后,世界坐标 == 命令前
+    nodeA.position.set(vec3(val(objA.props.position)).x, vec3(val(objA.props.position)).y, vec3(val(objA.props.position)).z);
+    expectVec3Close(vec3(nodeA.getWorldPosition(new Vector3())), {
+        x: worldBefore.x,
+        y: worldBefore.y,
+        z: worldBefore.z,
+    });
+    // 一次 undo:属性与定格一并回退
+    studio.undo();
+    expect(val(objA.props.parent)).toBe('');
+    expectVec3Close(vec3(val(objA.props.position)), { x: 1, y: 2, z: 3 });
+});
+test('anchors.clearParent:parent 清空与世界坐标定格一步撤销;undo 同时回退;挂回娘家', async () => {
+    const { project, registry, home, mountAnchor, flushRegistries } = setup();
+    await project.ready;
+    // Anchor 1 绑在 Anchor 2(10,0,0)下,局部偏移 (1,1,1) → 世界 (11,1,1)
+    const nodeB = new Object3D();
+    nodeB.position.set(10, 0, 0);
+    const nodeA = new Object3D();
+    nodeA.position.set(1, 1, 1);
+    nodeB.add(nodeA);
+    const objA = mountAnchor('Anchor 1', nodeA, {
+        position: { x: 1, y: 1, z: 1 },
+        parent: 'anchor:Anchor 2',
+    });
+    mountAnchor('Anchor 2', nodeB, { position: { x: 10, y: 0, z: 0 } });
+    flushRegistries();
+    const worldBefore = nodeA.getWorldPosition(new Vector3()).clone();
+    const stackBefore = undoStackOf().length;
+    await registry.execute('anchors.clearParent', { objectId: 'anchor:Anchor 1' }, ctx());
+    expect(undoStackOf().length).toBe(stackBefore + 1);
+    expect(val(objA.props.parent)).toBe('');
+    expectVec3Close(vec3(val(objA.props.position)), { x: 11, y: 1, z: 1 });
+    expect(nodeA.parent).toBe(home);
+    // 看护 no-op 前提:模拟包装器应用持久值后,世界坐标 == 命令前
+    const persisted = vec3(val(objA.props.position));
+    nodeA.position.set(persisted.x, persisted.y, persisted.z);
+    expectVec3Close(vec3(nodeA.getWorldPosition(new Vector3())), {
+        x: worldBefore.x,
+        y: worldBefore.y,
+        z: worldBefore.z,
+    });
+    studio.undo();
+    expect(val(objA.props.parent)).toBe('anchor:Anchor 2');
+    expectVec3Close(vec3(val(objA.props.position)), { x: 1, y: 1, z: 1 });
+});
+test('cameras.unbindPath:pathKey 与驱动机位定格一步撤销;undo 同时回退', async () => {
+    const { project, registry, sheet, mountCamera, flushRegistries } = setup();
+    await project.ready;
+    // 相机绑定 Path 1,持久机位是过期手动值;驱动机位 = 路径当前进度采样
+    const cam = new Object3D();
+    cam.position.set(7, 8, 9); // 帧驱动镜像:此刻相机本体就在采样点上
+    const camObj = mountCamera('Shot Camera', cam, {
+        position: { x: 1, y: 2, z: 3 },
+        pathKey: 'Path 1',
+    });
+    const pathObj = sheet.object('Path 1', {
+        progress: t.number(0.5),
+    });
+    objectRuntime.registerSceneSheetObject('path:Path 1', pathObj);
+    const unbindSampler = registerPathSampler('Path 1', (_u, out) => {
+        out.set(7, 8, 9);
+        return true;
+    });
+    cleanups.push(() => {
+        unbindSampler();
+        objectRuntime.unregisterSceneSheetObject('path:Path 1', pathObj);
+    });
+    flushRegistries();
+    const stackBefore = undoStackOf().length;
+    await registry.execute('cameras.unbindPath', { objectId: 'camera:Shot Camera' }, ctx());
+    expect(undoStackOf().length).toBe(stackBefore + 1);
+    expect(val(camObj.props.pathKey)).toBe('');
+    // 定格 = 驱动机位(与看护读 drivenPosRef 同源同值)
+    expectVec3Close(vec3(val(camObj.props.position)), { x: 7, y: 8, z: 9 });
+    studio.undo();
+    expect(val(camObj.props.pathKey)).toBe('Path 1');
+    expectVec3Close(vec3(val(camObj.props.position)), { x: 1, y: 2, z: 3 });
+});
+test('cameras.setAimTarget 解除:aimTarget 与朝向定格一步撤销;undo 同时回退', async () => {
+    const { project, registry, mountAnchor, mountCamera, flushRegistries } = setup();
+    await project.ready;
+    // 相机在 (1,2,3) 瞄准 Anchor 1(0,0,-5);持久朝向是过期手动值
+    const targetNode = new Object3D();
+    targetNode.position.set(0, 0, -5);
+    mountAnchor('Anchor 1', targetNode, { position: { x: 0, y: 0, z: -5 } });
+    const cam = new Object3D();
+    cam.position.set(1, 2, 3);
+    const camObj = mountCamera('Shot Camera', cam, {
+        position: { x: 1, y: 2, z: 3 },
+        aimTarget: 'anchor:Anchor 1',
+    });
+    flushRegistries();
+    const rotationBefore = vec3(val(camObj.props.rotation));
+    const stackBefore = undoStackOf().length;
+    await registry.execute('cameras.setAimTarget', { objectId: 'camera:Shot Camera', target: '' }, ctx());
+    expect(undoStackOf().length).toBe(stackBefore + 1);
+    expect(val(camObj.props.aimTarget)).toBe('');
+    // 定格朝向 = lookAt(机位, 目标) 的 XYZ 欧拉角;相机按它渲染时
+    // 指向目标(看护 no-op 前提:同值守卫看到 persisted==换算结果)
+    const frozen = vec3(val(camObj.props.rotation));
+    cam.rotation.set(frozen.x, frozen.y, frozen.z);
+    cam.updateMatrixWorld(true);
+    const forward = new Vector3(0, 0, -1).applyQuaternion(cam.quaternion);
+    const toTarget = new Vector3(0, 0, -5).sub(new Vector3(1, 2, 3)).normalize();
+    expect(forward.dot(toTarget)).toBeCloseTo(1, 5);
+    studio.undo();
+    expect(val(camObj.props.aimTarget)).toBe('anchor:Anchor 1');
+    expectVec3Close(vec3(val(camObj.props.rotation)), {
+        x: rotationBefore.x,
+        y: rotationBefore.y,
+        z: rotationBefore.z,
+    });
+});

package/dist/agent/commands/cameras.d.ts

@@ -0,0 +1,65 @@
+import type { AgentCommandRegistry } from '../registry';
+import type { AgentRuntime } from '../runtime';
+import type { SceneObjectId, Vec3 } from '../types';
+import type { CameraSeed } from '../../cameraRegistry';
+declare module '../runtime' {
+    interface AgentSceneRuntimeHandlers {
+        /**
+         * 创建相机(CameraScene 绑定,转发 addCameraToRegistry):同步生成
+         * key、写注册表清单、stash 取景种子,立即返回;seed 缺省时由
+         * CameraScene 从当前导演视角捕获(captureCameraSeed)。挂载完成经
+         * cameraLifecycle.notifyCameraReady 通知。
+         */
+        createCamera(args: {
+            seed?: CameraSeed;
+        }): {
+            key: string;
+        };
+        /**
+         * 设置活动相机(CameraScene 绑定,转发 setActiveCameraKey):
+         * 会话态,不进项目历史;key 的存在性由命令侧先校验。
+         */
+        setActiveCamera(args: {
+            cameraKey: string;
+        }): void;
+    }
+}
+/** 相机门面(Task 15 由同名命令转发实现) */
+export type CamerasApi = {
+    create(args: {
+        fromCurrentView?: boolean;
+        transform?: {
+            position: Vec3;
+            rotation: Vec3;
+        };
+        expectedRevision?: number;
+    }): Promise<{
+        objectId: SceneObjectId;
+        revision: number;
+    }>;
+    setActive(args: {
+        objectId: SceneObjectId;
+    }): Promise<void>;
+    setAimTarget(args: {
+        objectId: SceneObjectId;
+        target: string;
+        expectedRevision?: number;
+    }): Promise<{
+        revision: number;
+    }>;
+    bindPath(args: {
+        objectId: SceneObjectId;
+        pathId: SceneObjectId;
+        expectedRevision?: number;
+    }): Promise<{
+        revision: number;
+    }>;
+    unbindPath(args: {
+        objectId: SceneObjectId;
+        expectedRevision?: number;
+    }): Promise<{
+        revision: number;
+    }>;
+};
+export declare function registerCameraCommands(registry: AgentCommandRegistry, runtime: AgentRuntime): void;
+//# sourceMappingURL=cameras.d.ts.map

package/dist/agent/commands/cameras.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"cameras.d.ts","sourceRoot":"","sources":["../../../src/agent/commands/cameras.ts"],"names":[],"mappings":"AAgCA,OAAO,KAAK,EAAC,oBAAoB,EAAC,MAAM,aAAa,CAAA;AACrD,OAAO,KAAK,EAAC,YAAY,EAAC,MAAM,YAAY,CAAA;AAiB5C,OAAO,KAAK,EAAa,aAAa,EAAE,IAAI,EAAC,MAAM,UAAU,CAAA;AAS7D,OAAO,KAAK,EAAC,UAAU,EAAC,MAAM,sBAAsB,CAAA;AAEpD,OAAO,QAAQ,YAAY,CAAC;IAC1B,UAAU,yBAAyB;QACjC;;;;;WAKG;QACH,YAAY,CAAC,IAAI,EAAE;YAAC,IAAI,CAAC,EAAE,UAAU,CAAA;SAAC,GAAG;YAAC,GAAG,EAAE,MAAM,CAAA;SAAC,CAAA;QACtD;;;WAGG;QACH,eAAe,CAAC,IAAI,EAAE;YAAC,SAAS,EAAE,MAAM,CAAA;SAAC,GAAG,IAAI,CAAA;KACjD;CACF;AAED,8BAA8B;AAC9B,MAAM,MAAM,UAAU,GAAG;IACvB,MAAM,CAAC,IAAI,EAAE;QACX,eAAe,CAAC,EAAE,OAAO,CAAA;QACzB,SAAS,CAAC,EAAE;YAAC,QAAQ,EAAE,IAAI,CAAC;YAAC,QAAQ,EAAE,IAAI,CAAA;SAAC,CAAA;QAC5C,gBAAgB,CAAC,EAAE,MAAM,CAAA;KAC1B,GAAG,OAAO,CAAC;QAAC,QAAQ,EAAE,aAAa,CAAC;QAAC,QAAQ,EAAE,MAAM,CAAA;KAAC,CAAC,CAAA;IACxD,SAAS,CAAC,IAAI,EAAE;QAAC,QAAQ,EAAE,aAAa,CAAA;KAAC,GAAG,OAAO,CAAC,IAAI,CAAC,CAAA;IACzD,YAAY,CAAC,IAAI,EAAE;QACjB,QAAQ,EAAE,aAAa,CAAA;QACvB,MAAM,EAAE,MAAM,CAAA;QACd,gBAAgB,CAAC,EAAE,MAAM,CAAA;KAC1B,GAAG,OAAO,CAAC;QAAC,QAAQ,EAAE,MAAM,CAAA;KAAC,CAAC,CAAA;IAC/B,QAAQ,CAAC,IAAI,EAAE;QACb,QAAQ,EAAE,aAAa,CAAA;QACvB,MAAM,EAAE,aAAa,CAAA;QACrB,gBAAgB,CAAC,EAAE,MAAM,CAAA;KAC1B,GAAG,OAAO,CAAC;QAAC,QAAQ,EAAE,MAAM,CAAA;KAAC,CAAC,CAAA;IAC/B,UAAU,CAAC,IAAI,EAAE;QACf,QAAQ,EAAE,aAAa,CAAA;QACvB,gBAAgB,CAAC,EAAE,MAAM,CAAA;KAC1B,GAAG,OAAO,CAAC;QAAC,QAAQ,EAAE,MAAM,CAAA;KAAC,CAAC,CAAA;CAChC,CAAA;AAgTD,wBAAgB,sBAAsB,CACpC,QAAQ,EAAE,oBAAoB,EAC9B,OAAO,EAAE,YAAY,GACpB,IAAI,CA4QN"}