@dotcms/create-app 26.9.3-1 → 26.9.3-1-next.2649

package/README.md

@@ -8,10 +8,10 @@ Beta. Behavior and flags may change.
 
 ## Requirements
 
-- Node.js + npm
+- Node.js 22.22.3+ and npm
 - Git
 - Docker (for `--local` or `--starter`)
-- Internet access (downloads templates and docker-compose)
+- Internet access (downloads templates; pulls Docker images)
 
 ## Which SDK Version Should I Use?
 
@@ -89,22 +89,27 @@ Flow:
 2. Checks dotCMS health at `/api/v1/appconfiguration`.
 3. Authenticates (up to 3 attempts).
 4. Reads `defaultSite` from `/api/v1/site/defaultSite`.
-5. Configures UVE via `/api/v1/apps/dotema-config-v2/{siteId}`.
+5. Configures UVE via `/api/v1/apps/dotema-config-v2/{siteId}`. **Optional** — if this fails the
+   CLI warns, explains how to finish it by hand, and carries on.
 6. Scaffolds selected frontend and runs `npm install`.
-7. Prints framework-specific env setup instructions.
+7. Writes `.env` with your host, site ID and token (see [Your `.env`](#your-env)).
 
 ### 2) Local mode (`--local`)
 
 Flow:
 
 1. Validates Docker availability.
-2. Validates required ports: `8082`, `8443`, `9200`, `9600`.
-3. Downloads docker-compose from dotCMS main repo.
-4. Runs `docker compose up -d`.
-5. Waits for local health check.
+2. Checks the ports this stack publishes: `8082`, `8443` and `8090`. A dotCMS already running on
+   `8082` is not treated as a conflict — see [If dotCMS is already running](#if-dotcms-is-already-running).
+3. Writes the **bundled** `docker-compose.yml` into the project directory (see
+   [The bundled Docker stack](#the-bundled-docker-stack)).
+4. Runs `docker compose up -d --wait`, which blocks until every service reports healthy, streaming
+   progress and elapsed time so a long first pull is never a silent spinner.
+5. Waits for readiness on `/dotmgt/readyz`, falling back to `/api/v1/appconfiguration`.
 6. Authenticates with default local credentials (`admin@dotcms.com` / `admin`).
-7. Reads `defaultSite`, configures UVE, scaffolds frontend, runs `npm install`.
-8. Prints framework-specific env setup instructions.
+7. Reads `defaultSite`, configures UVE (optional — a failure warns and continues), scaffolds the
+   frontend, runs `npm install`.
+8. Writes `.env` with your host, site ID and token (see [Your `.env`](#your-env)).
 
 ### 3) Starter-only local mode (`--starter <url>`)
 
@@ -113,7 +118,7 @@ Flow:
 Flow:
 
 1. Same Docker and port checks as local mode.
-2. Downloads docker-compose.
+2. Writes the bundled `docker-compose.yml`.
 3. Rewrites `CUSTOM_STARTER_URL` in `docker-compose.yml`.
 4. Also passes `CUSTOM_STARTER_URL` in compose environment at runtime.
 5. Starts containers and waits for health check.
@@ -121,6 +126,77 @@ Flow:
 
 Use this when your starter is not compatible with the default frontend sample flow.
 
+## The bundled Docker stack
+
+`--local` and `--starter` write a `docker-compose.yml` that **ships inside this package**. It is
+no longer downloaded from the `dotCMS/core` repository at run time, so the stack you get is the one
+this CLI version was tested against, rather than whatever is currently on `main`.
+
+The stack is `db` (PostgreSQL), `opensearch`, and `dotcms`. `dotcms` starts only after both
+dependencies report **healthy**, and carries `restart: unless-stopped`, so it no longer races
+Postgres and exit at startup.
+
+### Published ports
+
+| Port | Binding | Purpose |
+| --- | --- | --- |
+| `8082` | all interfaces | dotCMS HTTP |
+| `8443` | all interfaces | dotCMS HTTPS |
+| `8090` | **`127.0.0.1` only** | dotCMS management endpoints |
+
+PostgreSQL and OpenSearch publish **no** ports — they are reachable only from inside the compose
+network, so running your own Postgres or OpenSearch on the usual ports does not conflict.
+
+> **Why 8090 is loopback-only.** It serves `/dotmgt/livez`, `/dotmgt/readyz`, `/dotmgt/health` and
+> `/dotmgt/metrics`, and dotCMS authorizes those purely by the port a request arrives on — there is
+> no credential check and no IP allow-list. Binding it to `0.0.0.0` would expose your instance's
+> health and metrics to everyone on your network. It is bound to `127.0.0.1` deliberately; do not
+> "fix" it to a wildcard.
+
+### Using a different compose file
+
+Set `DOTCMS_COMPOSE_URL` to fetch one from a URL instead of using the bundled file:
+
+```bash
+DOTCMS_COMPOSE_URL=https://example.com/my-compose.yml npx @dotcms/create-app my-app --local
+```
+
+This is an escape hatch for hotfixes. The file must keep a single-line `CUSTOM_STARTER_URL:` entry
+or `--starter` will fail against it.
+
+## If dotCMS is already running
+
+A dotCMS on `8082` from a previous run is not a conflict — the CLI probes it and offers a choice:
+
+```
+⚠  Found a dotCMS already running at http://localhost:8082
+   Docker project "my-app" · Up 8 minutes (healthy)
+
+? How would you like to continue?
+❯ Use this instance for my project
+  Replace it with a clean instance
+  Cancel
+```
+
+**Replace** stops that Docker project and removes its volumes (`docker compose -p <project> down -v`)
+before starting fresh. It is offered only when a Compose project owns the port — something started
+outside Compose is not the CLI's to destroy.
+
+Reuse requires the instance to pass a readiness check **and** issue a token; anything else on `8082`
+is still a hard failure.
+
+In a non-interactive run (CI, or no TTY) the CLI auto-reuses and prints a notice. It never replaces
+without being asked.
+
+## Your `.env`
+
+The CLI writes `.env` into your project with the values the scaffolded app reads — `NEXT_PUBLIC_*`
+for Next.js, `PUBLIC_*` for Astro. You do not need to copy anything by hand.
+
+An existing `.env` is never overwritten: the CLI prints the values instead so you can merge them.
+Angular has no `.env` — it reads a TypeScript `environment` object, so the values are printed for
+you to paste into the environment files.
+
 ## Examples
 
 Interactive:
@@ -172,9 +248,10 @@ Docker not available:
 
 Ports already in use:
 
-- macOS/Linux: `lsof -i :8082`
-- Windows: `netstat -ano | findstr ":8082"`
-- Stop conflicting services or run `docker compose down`.
+- If it is a dotCMS from a previous run, the CLI offers to reuse or replace it — see
+  [If dotCMS is already running](#if-dotcms-is-already-running).
+- Otherwise, find the owner: `lsof -i :8082` (macOS/Linux) or
+  `netstat -ano | findstr ":8082"` (Windows), then stop it or run `docker compose down`.
 
 `zip END header not found` during starter load:
 
@@ -186,13 +263,19 @@ Ports already in use:
 Build:
 
 ```sh
-yarn nx build sdk-create-app --skip-nx-cache
+pnpm nx build sdk-create-app --skip-nx-cache
 ```
 
 Lint:
 
 ```sh
-yarn nx lint sdk-create-app
+pnpm nx lint sdk-create-app
+```
+
+Verify the package ships correctly (asserts the compose asset reaches `dist/` and the npm tarball):
+
+```sh
+pnpm nx verify-package sdk-create-app
 ```
 
 Dist output:

package/assets/docker-compose.yml

@@ -0,0 +1,86 @@
+# Bundled with @dotcms/create-app. Written to the project directory by the CLI.
+# Implements contracts/compose-service-contract.md C1-C8.
+services:
+    db:
+        image: pgvector/pgvector:pg18
+        command: postgres -c 'max_connections=400' -c 'shared_buffers=128MB'
+        environment:
+            POSTGRES_USER: 'dotcmsdbuser'
+            POSTGRES_PASSWORD: 'password'
+            POSTGRES_DB: 'dotcms'
+        volumes:
+            - dbdata:/var/lib/postgresql
+        networks: [db_net]
+        healthcheck:
+            test: ['CMD-SHELL', 'pg_isready -U dotcmsdbuser -d dotcms -h localhost -p 5432']
+            interval: 10s
+            timeout: 5s
+            retries: 5
+        restart: unless-stopped
+
+    opensearch:
+        image: opensearchproject/opensearch:1
+        environment:
+            cluster.name: 'elastic-cluster'
+            discovery.type: 'single-node'
+            bootstrap.memory_lock: 'true'
+            OPENSEARCH_JAVA_OPTS: '-Xmx1G'
+        ulimits:
+            memlock: { soft: -1, hard: -1 }
+            nofile: { soft: 65536, hard: 65536 }
+        volumes:
+            - opensearch-data:/usr/share/opensearch/data
+        networks: [opensearch-net]
+        healthcheck:
+            test:
+                [
+                    'CMD-SHELL',
+                    'curl -sk https://localhost:9200 -u admin:admin | grep -q cluster_name'
+                ]
+            interval: 10s
+            timeout: 5s
+            retries: 12
+        restart: unless-stopped
+
+    dotcms:
+        image: dotcms/dotcms:latest
+        environment:
+            CMS_JAVA_OPTS: '-Xmx1g '
+            LANG: 'C.UTF-8'
+            TZ: 'UTC'
+            DB_BASE_URL: 'jdbc:postgresql://db/dotcms'
+            DB_USERNAME: 'dotcmsdbuser'
+            DB_PASSWORD: 'password'
+            DOT_ES_AUTH_BASIC_PASSWORD: 'admin'
+            DOT_ES_ENDPOINTS: 'https://opensearch:9200'
+            DOT_INITIAL_ADMIN_PASSWORD: 'admin'
+            DOT_DOTCMS_CLUSTER_ID: 'dotcms-production'
+            CUSTOM_STARTER_URL: 'https://repo.dotcms.com/artifactory/libs-release-local/com/dotcms/starter/20260630/starter-20260630.zip'
+        depends_on:
+            db:
+                condition: service_healthy
+            opensearch:
+                condition: service_healthy
+        volumes:
+            - cms-shared:/data/shared
+        networks: [db_net, opensearch-net]
+        healthcheck:
+            test: ['CMD', 'curl', '-f', 'http://127.0.0.1:8090/dotmgt/livez']
+            interval: 30s
+            timeout: 10s
+            retries: 5
+            start_period: 180s
+        restart: unless-stopped
+        ports:
+            - '8082:8082'
+            - '8443:8443'
+            - '127.0.0.1:8090:8090'
+
+networks:
+    db_net:
+    opensearch-net:
+
+volumes:
+    cms-shared:
+    dbdata:
+    opensearch-data: