@doenet/doenetml-iframe 0.7.21-dev.409 → 0.7.21-dev.411

package/diagnostics-Dv3tKIJO-Dv3tKIJO.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"diagnostics-Dv3tKIJO-Dv3tKIJO.js","sources":["../../../i18n/dist/diagnostics-Dv3tKIJO.js"],"sourcesContent":["const diagnostics = '# French diagnostics. Translated from `locales/en/diagnostics.ftl`, which is\\n# the source of truth: `lint:i18n` rejects a key that does not exist there, and\\n# reports a key that exists there but not here as missing coverage.\\n#\\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\\n# Correct anything here freely; nothing in it was written by a translator.\\n#\\n# Attribute names, element names and every other DoenetML identifier — `through`,\\n# `endpoint`, `midpointOffset`, `numDimensions`, `<answer>`, `selectFromSequence`\\n# — are part of the language, not prose, and stay in English exactly as written.\\n# So does anything quoted back from the author\\'s own source.\\n\\n## `<lineSegment>`\\n\\nline-segment-attributes-ignored-with-endpoints =\\n    { $attributesCount ->\\n        [one] { $attributes } est ignoré lorsque deux extrémités sont spécifiées\\n       *[other] { $attributes } sont ignorés lorsque deux extrémités sont spécifiées\\n    }\\n\\nline-segment-attributes-ignored-with-endpoint-and-midpoint =\\n    { $attributesCount ->\\n        [one] { $attributes } est ignoré lorsqu’une extrémité et un milieu sont tous deux spécifiés\\n       *[other] { $attributes } sont ignorés lorsqu’une extrémité et un milieu sont tous deux spécifiés\\n    }\\n\\nline-segment-midpoint-offset-without-midpoint = midpointOffset n’a aucun effet sans un milieu\\n\\n## `<line>`\\n\\nline-points-undetermined-dimensions = Droite passant par des points de dimensions indéterminées.\\n\\nline-points-too-few-dimensions = Une droite doit passer par des points d’au moins deux dimensions.\\n\\nline-points-depend-on-variables = La droite passe par des points qui dépendent de variables : { $variables }.\\n\\nline-equation-invalid-format = Format invalide pour l’équation d’une droite en les variables { $variable1 } et { $variable2 }.\\n\\n## `<ray>`\\n\\nray-overprescribed-through = La demi-droite est déterminée par through, endpoint et direction. Le through spécifié est ignoré.\\n\\nray-dimension-mismatch = Incohérence de numDimensions dans la demi-droite.\\n\\n## `<vector>`\\n\\nvector-overprescribed-head = Le vecteur est déterminé par head, tail et displacement. Le head spécifié est ignoré.\\n\\nvector-dimension-mismatch = Incohérence de numDimensions dans le vecteur.\\n\\n## Attracting and constraining\\n\\nattract-to-without-nearest-point = Impossible d’attirer vers un `<{ $component }>`, car il n’a pas de variable d’état nearestPoint.\\n\\nconstrain-to-without-nearest-point = Impossible de contraindre à un `<{ $component }>`, car il n’a pas de variable d’état nearestPoint.\\n\\nconstrain-to-interior-without-nearest-point = Impossible de contraindre à l’intérieur d’un `<{ $component }>`, car il n’a pas de variable d’état nearestPoint.\\n\\n## `<choiceInput>`\\n\\nchoice-input-label-position-ignored = labelPosition est ignoré pour un choiceInput non incorporé\\n\\n## Ordering children by index\\n\\nchoice-input-indices-count-mismatch = Les indices spécifiés pour choiceInput sont ignorés, car leur nombre ne correspond pas au nombre d’enfants choice.\\n\\npretzel-indices-count-mismatch = Les indices spécifiés pour problem sont ignorés, car leur nombre ne correspond pas au nombre d’enfants problem.\\n\\nshuffle-indices-count-mismatch = Les indices spécifiés pour shuffle sont ignorés, car leur nombre ne correspond pas au nombre de composants.\\n\\nindices-ignored-out-of-range = Les indices spécifiés pour { $component } sont ignorés, car certains sont hors limites.\\n\\npretzel-indices-repeated = Les indices spécifiés pour pretzel sont ignorés, car certains sont répétés.\\n\\npretzel-circuit-first-index = Les indices spécifiés pour pretzel en mode circuit sont ignorés, car le premier indice doit être 1.\\n\\n## `<shuffle>` and `<sort>`\\n\\nstring-children-need-type = Pour que `<{ $component }>` fonctionne avec des enfants de type chaîne, un attribut `type` doit être spécifié.\\n\\ninvalid-type-defaulting-to-math = Type { $type } invalide pour le composant { $component }. Il doit valoir math, text, number ou boolean. math est utilisé par défaut.\\n\\nstring-not-valid-component-to-arrange = La chaîne « { $value } » n’est pas un composant valide pour { $component }. Elle est ignorée.\\n\\n## Types and variables\\n\\ninvalid-type-defaulting-to-number = Type { $type } invalide ; le type est fixé à number.\\n\\ninvalid-variable-value = Valeur de variable invalide : `{ $value }`\\n\\n## Variants\\n\\nvariant-index-must-be-number = L’indice de variante { $index } doit être un nombre\\n\\nvariant-index-must-be-integer = L’indice de variante { $index } doit être un entier\\n\\n## `<sideBySide>`\\n\\nside-by-side-absolute-widths = `<{ $component }>` n’est pas implémenté pour des mesures absolues. Les largeurs deviennent relatives.\\n\\nside-by-side-absolute-margins = `<{ $component }>` n’est pas implémenté pour des mesures absolues. Les marges deviennent relatives.\\n\\nside-by-side-no-block-child = `<{ $component }>` invalide : il doit avoir au moins un enfant de type bloc.\\n\\n## `<label>`\\n\\nlabel-for-ignored-on-graphical = L’attribut `for` sur un `<label>` graphique est ignoré.\\n\\nlabel-for-must-resolve-to-one = L’attribut `for` de `<label>` doit se résoudre en exactement un composant.\\n\\nlabel-for-unresolved = L’attribut `for` de `<label>` n’a pas pu être résolu en un composant.\\n\\nlabel-for-answer-with-authored-inputs = L’attribut `for` de `<label>` référence un `<answer>` dont les entrées sont écrites explicitement ; référencez directement l’entrée.\\n\\nlabel-for-answer-without-input = L’attribut `for` de `<label>` référence un `<answer>` sans entrée à étiqueter.\\n\\nlabel-for-must-reference-input-or-answer = L’attribut `for` de `<label>` doit référencer une entrée ou une réponse.\\n\\n## Accessibility\\n\\naccessibility-short-description-or-decorative = Pour l’accessibilité, `<{ $component }>` doit avoir une description courte ou être déclaré décoratif.\\n\\naccessibility-video-short-description = Pour l’accessibilité, `<video>` doit avoir une description courte.\\n\\naccessibility-input-short-description-or-label = Pour l’accessibilité, `<{ $component }>` doit avoir une description courte ou une étiquette.\\n\\naccessibility-answer-input-short-description-or-label = Pour l’accessibilité, un `<answer>` qui crée une entrée doit avoir une description courte ou une étiquette.\\n\\naccessibility-short-description-contains-math = Une description courte ne devrait pas contenir de composants mathématiques comme `<{ $component }>`. Écrivez les mathématiques en toutes lettres.\\n\\naccessibility-section-title-insufficient-contrast =\\n    { $mode ->\\n        [dark] { $colorName } n’a pas un contraste suffisant pour le texte du titre de section (mode sombre) ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1 ; il faut au moins { $threshold }:1).\\n       *[other] { $colorName } n’a pas un contraste suffisant pour le texte du titre de section ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1 ; il faut au moins { $threshold }:1).\\n    }\\n\\n## `<circle>`\\n\\ncircle-through-points-non-numerical = `<circle>` passant par { $count } points n’est pas implémenté lorsque les points n’ont pas de valeurs numériques.\\n\\ncircle-too-many-through-points = Impossible de calculer un cercle passant par plus de 3 points.\\n\\ncircle-overprescribed-radius-center-points = Impossible de calculer un cercle avec un rayon, un centre et des points spécifiés.\\n\\ncircle-center-with-multiple-points = Impossible de calculer un cercle de centre spécifié passant par plus d’un point.\\n\\ncircle-radius-too-small = Impossible de calculer le cercle : la distance entre les deux points étant { $distance }, le rayon spécifié { $radius } est trop petit.\\n\\ncircle-radius-with-many-points = Impossible de créer un cercle passant par plus de deux points avec un rayon spécifié.\\n\\ncircle-invalid-center-or-through-points = Centre ou points de passage du cercle invalides.\\n\\ncircle-radius-center-with-multiple-points = Impossible de calculer le rayon d’un cercle de centre spécifié passant par plus d’un point.\\n\\ncircle-change-radius-non-numerical = Impossible de changer le rayon d’un cercle dont les points de passage ne sont pas numériques\\n\\ncircle-radius-with-points-non-numerical = Impossible de créer un cercle passant par plus d’un point avec un rayon spécifié lorsque les valeurs ne sont pas numériques.\\n\\ncircle-change-center-non-numerical = Le changement de centre d’un cercle passant par des points non numériques n’est pas implémenté.\\n\\n## `<function>`\\n\\nfunction-domain-insufficient-dimensions =\\n    { $intervals ->\\n        [one] Dimensions insuffisantes pour le domaine de la fonction. Le domaine a { $intervals } intervalle mais la fonction a { $inputs ->\\n            [one] { $inputs } entrée\\n           *[other] { $inputs } entrées\\n        }.\\n       *[other] Dimensions insuffisantes pour le domaine de la fonction. Le domaine a { $intervals } intervalles mais la fonction a { $inputs ->\\n            [one] { $inputs } entrée\\n           *[other] { $inputs } entrées\\n        }.\\n    }\\n\\nfunction-domain-invalid-format = Format invalide pour le domaine de la fonction.\\n\\nfunction-ignoring-non-numerical =\\n    { $type ->\\n        [maximum] Le maximum non numérique de la fonction est ignoré.\\n        [minimum] Le minimum non numérique de la fonction est ignoré.\\n        [extremum] L’extremum non numérique de la fonction est ignoré.\\n        [point] Le point non numérique de la fonction est ignoré.\\n        [slope] La pente non numérique de la fonction est ignorée.\\n       *[other] { $type } non numérique de la fonction est ignoré.\\n    }\\n\\nfunction-ignoring-empty =\\n    { $type ->\\n        [maximum] Le maximum vide de la fonction est ignoré.\\n        [minimum] Le minimum vide de la fonction est ignoré.\\n        [extremum] L’extremum vide de la fonction est ignoré.\\n        [point] Le point vide de la fonction est ignoré.\\n       *[other] { $type } vide de la fonction est ignoré.\\n    }\\n\\nfunction-points-too-close = La fonction contient deux points trop proches l’un de l’autre. Impossible de définir la fonction.\\n\\nfunction-iterates-input-output-mismatch =\\n    { $inputs ->\\n        [one] Les itérées d’une fonction ne sont possibles que si le nombre d’entrées est égal au nombre de sorties. Cette fonction a { $inputs } entrée et { $outputs ->\\n            [one] { $outputs } sortie\\n           *[other] { $outputs } sorties\\n        }.\\n       *[other] Les itérées d’une fonction ne sont possibles que si le nombre d’entrées est égal au nombre de sorties. Cette fonction a { $inputs } entrées et { $outputs ->\\n            [one] { $outputs } sortie\\n           *[other] { $outputs } sorties\\n        }.\\n    }\\n\\n## `<sequence>`\\n\\nsequence-invalid-length = Longueur de suite invalide. Ce doit être un entier positif ou nul.\\n\\nsequence-invalid-step = Pas de suite invalide. Ce doit être un nombre pour une suite de type { $type }.\\n\\nsequence-invalid-endpoint-number = « { $attribute } » invalide pour une suite de nombres. Ce doit être un nombre.\\n\\nsequence-invalid-endpoint-letters = « { $attribute } » invalide pour une suite de lettres. Ce doit être une combinaison de lettres.\\n\\nsequence-invalid-endpoint = « { $attribute } » invalide pour la suite.\\n\\nselect-from-sequence-coprime-not-numbers = coprime est ignoré, car la sélection ne porte pas sur des nombres\\n\\nselect-from-sequence-coprime-with-exclude-combinations = coprime est ignoré, car excludeCombinations est spécifié\\n\\n## Resolving a `target`\\n\\ntarget-not-found = target invalide pour `<{ $source }>` : cible introuvable.\\n\\ntarget-state-variable-not-found = target invalide pour `<{ $source }>` : aucune variable d’état nommée « { $property } » sur un `<{ $component }>`.\\n\\n## `<odeSystem>`\\n\\node-system-variables-match-independent = Les variables d’un `<odeSystem>` doivent différer de la variable indépendante.\\n\\node-system-duplicate-variable-names = Impossible de définir les seconds membres de l’EDO avec des noms de variables dépendantes en double.\\n\\node-system-rhs-function-error = Impossible de définir le second membre de l’EDO. Erreur lors de la création de la fonction mathjs.\\n\\n## `<angle>`, `<parabola>`, and `<intersection>`\\n\\nangle-too-many-lines = Impossible de définir un angle entre { $count } droites\\n\\nangle-invalid-through-point = Point invalide dans le through d’un `<angle>`\\n\\nparabola-vertex-too-many-points = Une parabole de sommet donné passant par plus d’un point n’est pas implémentée.\\n\\nparabola-too-many-points = Une parabole passant par plus de 3 points n’est pas implémentée.\\n\\nintersection-too-many-items = L’intersection de plus de deux objets n’est pas implémentée\\n\\n## Other math components\\n\\nionic-compound-not-two-ions = Les composés ioniques autres qu’à deux ions ne sont pas implémentés.\\n\\nionic-compound-needs-cation-and-anion = Les composés ioniques ne sont implémentés que pour un cation et un anion.\\n\\nsolve-equations-cannot-evaluate = Impossible de résoudre l’équation, car elle n’a pas pu être évaluée : { $equation }\\n\\nmath-operators-operand-number-required = Un operandNumber doit être spécifié pour extraire un opérande mathématique.\\n\\neigen-decomposition-failed = Impossible de calculer les valeurs propres de la matrice\\n\\n## `<matchesPattern>`\\n\\nmatches-pattern-parameter-not-in-pattern =\\n    { $parametersCount ->\\n        [one] `<matchesPattern>` : le paramètre { $parameters } n’apparaît pas dans le motif ; il correspondra donc toujours à un blanc.\\n       *[other] `<matchesPattern>` : les paramètres { $parameters } n’apparaissent pas dans le motif ; ils correspondront donc toujours à un blanc.\\n    }\\n\\n## `<graph>`\\n\\ngraph-grid-invalid = `<graph>` : impossible d’interpréter grid=\"{ $grid }\". La valeur doit être none, medium, dense, ou deux nombres positifs séparés par une espace, comme grid=\"1 0.5\". Aucune grille n’est tracée.\\n\\n## PreFigure renderer\\n\\nprefigure-x-label-position-unsupported = `<graph>` : xLabelPosition=\"left\" n’est pas pris en charge par le rendu prefigure ; le comportement de la position droite est utilisé.\\n\\nprefigure-y-label-position-unsupported = `<graph>` : yLabelPosition=\"bottom\" n’est pas pris en charge par le rendu prefigure ; le comportement de la position haute est utilisé.\\n\\nprefigure-invalid-axis-bounds = `<graph>` : bornes d’axes invalides pour la conversion prefigure ; la bbox par défaut (-10,-10,10,10) est utilisée.\\n\\nprefigure-invalid-width = `<graph>` : largeur invalide pour la conversion prefigure ; la largeur de diagramme par défaut 425 est utilisée.\\n\\nprefigure-invalid-aspect-ratio = `<graph>` : aspectRatio invalide pour la conversion prefigure ; le rapport d’aspect par défaut 1 est utilisé.\\n\\nprefigure-grid-spacing-too-fine = `<graph>` : le pas de la grille est trop fin pour les bornes des axes ; la grille est omise dans le rendu prefigure.\\n\\nprefigure-annotations-not-rendered = `<graph>` : les annotations ne sont pas rendues en dehors du rendu PreFigure.\\n\\nmultiple-annotations-children = Plusieurs enfants `<annotations>` trouvés dans `<graph>` ; tous sauf le dernier sont ignorés.\\n\\n## Referring to other components\\n\\ncopy-unrecognized-component-type = Impossible d’étendre ou de copier un type de composant non reconnu : { $type }.\\n\\ncopy-prop-not-found = Propriété { $property } introuvable sur un composant de type { $component }\\n\\ncollect-no-source = Aucune source trouvée pour collect.\\n\\ncollect-invalid-component-type = Impossible de collecter des composants de type `<{ $component }>`, car ce type est invalide.\\n\\nreference-index-unavailable = Impossible de référencer l’indice `{ $reference }`\\n\\n## `<callAction>`\\n\\ncomponent-action-unavailable = Impossible d’appeler { $action } sur le composant `{ $reference }`\\n\\n## `<dataFrame>`\\n\\ndata-frame-inconsistent-row-lengths = Les données ont une forme invalide. Les lignes ont des longueurs incohérentes. Trouvé dans componentIdx :{ $componentIdx }\\n\\ndata-frame-duplicate-column-names = Les données ont des noms de colonnes en double. Trouvé dans componentIdx :{ $componentIdx }\\n\\ndata-frame-missing-column-name = Il manque un nom de colonne aux données. Trouvé dans componentIdx :{ $componentIdx }\\n\\n## `<answer>` and scoring\\n\\nanswer-award-depends-on-own-response = Un award de cette réponse s’appuie sur la réponse soumise du tag answer lui-même, ce qui provoquera un comportement inattendu.\\n\\nanswer-max-num-attempts-in-section-wide-check-work = Définir `maxNumAttempts` sur un `<answer>` situé dans un conteneur avec `sectionWideCheckWork` n’a aucun effet : le nombre de tentatives est contrôlé par le conteneur. Définissez `maxNumAttempts` sur le conteneur.\\n\\nnested-section-wide-check-work-max-num-attempts = Définir `maxNumAttempts` sur un conteneur avec `sectionWideCheckWork` lui-même situé dans un autre conteneur avec `sectionWideCheckWork` n’a aucun effet : le nombre de tentatives est contrôlé par le conteneur extérieur. Définissez `maxNumAttempts` sur le conteneur extérieur.\\n\\nanswer-attributes-need-symbolic-equality =\\n    { $attributesCount ->\\n        [one] L’attribut { $attributes } n’aura aucun effet sans symbolicEquality.\\n       *[other] Les attributs { $attributes } n’auront aucun effet sans symbolicEquality.\\n    }\\n\\nanswer-invalid-type = Type invalide pour answer : { $type }\\n\\n## `<module>`, `<conditionalContent>`, `<slider>`, `<pretzel>`\\n\\nmodule-attribute-child-needs-name = Le composant `<{ $component }>` n’ayant pas de nom, il ne peut pas servir d’attribut de module\\n\\nmodule-attribute-name-already-defined = Le composant `<{ $component } name=\"{ $name }\">` ne peut pas servir d’attribut de module, car le type de composant `<module>` définit déjà un attribut « { $name } ».\\n\\nconditional-content-condition-ignored = L’attribut `condition` est ignoré sur un composant `<conditionalContent>` ayant des enfants case ou else.\\n\\nslider-markers-type-mismatch = Le type des marqueurs ne correspond pas au type du curseur.\\n\\npretzel-problem-needs-statement-and-answer = pretzel invalide : chaque `<problem>` doit contenir un `<statement>` et un `<answer>`.\\n\\npretzel-circuit-first-problem-distractor = pretzel invalide : en mode=\"circuit\", le premier `<problem>` ne peut pas être un distracteur.\\n\\n## Attribute values\\n\\nattribute-invalid-values =\\n    { $valuesCount ->\\n        [one] Valeur { $values } invalide pour l’attribut `{ $attribute }` ; elle est ignorée.\\n       *[other] Valeurs { $values } invalides pour l’attribut `{ $attribute }` ; elles sont ignorées.\\n    }\\n\\nattribute-must-be-references = Valeur `{ $value }` invalide pour l’attribut `{ $attribute }`. L’attribut doit être composé de références commençant par `$`.\\n\\nmath-input-invalid-function-names = <mathInput> : nom(s) de fonction invalide(s) ignoré(s) dans { $attribute } : { $names }. Le segment affiché de chaque nom doit compter au moins 2 caractères (lettres ou tirets) ; un suffixe facultatif `|<alternative mathspeak>` peut suivre.\\n\\n## Building components from the source\\n\\ncomponent-type-invalid = Type de composant invalide : `<{ $componentType }>`\\n\\nattribute-repeated = L’attribut { $attribute } ne peut pas être répété.\\n\\nattribute-invalid-for-component = Attribut « { $attribute } » invalide pour un composant de type `<{ $componentType }>`.\\n\\n## Style definition contrast\\n\\nstyle-definition-insufficient-contrast =\\n    La définition de style { $styleNumber } n’a pas un contraste suffisant pour { $context ->\\n        [text-on-background] la couleur du texte sur la couleur de fond\\n        [high-contrast] la couleur à contraste élevé sur le canevas\\n        [line] la couleur des traits sur le canevas\\n        [marker] la couleur des marqueurs sur le canevas\\n       *[text-on-canvas] la couleur du texte sur le canevas\\n    }{ $mode ->\\n        [dark] { \" (mode sombre)\" }\\n       *[light] { \"\" }\\n    } ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1 ; il faut au moins { $threshold }:1).\\n\\nstyle-definition-dark-mode-text-background-contrast =\\n    Bien que la définition de style { $styleNumber } spécifie des couleurs dont le contraste est suffisant en mode clair, les couleurs de mode sombre qui en sont dérivées n’offrent pas un contraste suffisant entre le texte et le fond ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1 ; il faut au moins { $threshold }:1). { $suggestion ->\\n        [available] Pour garantir un contraste suffisant en mode sombre, augmentez le contraste du mode clair (par exemple { $lightAttribute }=\"{ $lightColor }\") ou remplacez la couleur du mode sombre (par exemple { $darkAttribute }=\"{ $darkColor }\").\\n       *[none] Pour garantir un contraste suffisant en mode sombre, augmentez le contraste du mode clair ou remplacez les couleurs dérivées avec textColorDarkMode et/ou backgroundColorDarkMode.\\n    }\\n\\nstyle-definition-dark-mode-text-canvas-contrast =\\n    Bien que la définition de style { $styleNumber } spécifie une couleur de texte dont le contraste est suffisant en mode clair, la couleur de texte de mode sombre qui en est dérivée n’offre pas un contraste suffisant sur le canevas ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1 ; il faut au moins { $threshold }:1). { $suggestion ->\\n        [available] Pour garantir un contraste suffisant en mode sombre, augmentez le contraste du mode clair (par exemple textColor=\"{ $lightColor }\") ou remplacez la couleur du mode sombre (par exemple textColorDarkMode=\"{ $darkColor }\").\\n       *[none] Pour garantir un contraste suffisant en mode sombre, augmentez le contraste du mode clair ou remplacez la couleur dérivée avec textColorDarkMode.\\n    }\\n\\nsection-multiple-style-palettes = Une section ne peut sélectionner qu’un seul <stylePalette> ; le dernier est utilisé.\\n\\n## Unique variants\\n\\nvariant-num-to-select-not-non-negative-integer = impossible de déterminer les variantes uniques de { $component }, car numToSelect n’est pas un entier positif ou nul.\\n\\nvariant-num-to-select-not-constant-number = impossible de déterminer les variantes uniques de { $component }, car numToSelect n’est pas un nombre constant.\\n\\nvariant-with-replacement-not-constant-boolean = impossible de déterminer les variantes uniques de { $component }, car withReplacement n’est pas un booléen constant.\\n\\nvariant-select-weight-disables-unique = Les variantes uniques de select sont désactivées lorsqu’une option spécifie selectWeight ou selectForVariants\\n\\nvariant-coprime-undetermined = impossible de déterminer les variantes uniques de { $component }, car on ne peut pas établir que coprime est toujours faux.\\n\\nvariant-attribute-not-constant = impossible de déterminer les variantes uniques de { $component }, car { $attribute } n’est pas une constante.\\n\\nvariant-attribute-not-number = impossible de déterminer les variantes uniques de { $component }, car { $attribute } n’est pas un nombre.\\n\\nvariant-attribute-wrong-type-for-sequence =\\n    impossible de déterminer les variantes uniques de { $component } de type { $type }, car { $attribute } n’est pas { $expected ->\\n        [letters-combination] une combinaison de lettres\\n        [math-expression] une expression mathématique valide\\n        [integer] un entier\\n       *[number] un nombre\\n    }.\\n\\nvariant-length-not-integer = impossible de déterminer les variantes uniques de { $component }, car length n’est pas un entier.\\n\\nvariant-sort-not-implemented = les variantes uniques d’un { $component } avec sort ne sont pas implémentées\\n\\nvariant-exclude-combinations-not-implemented = les variantes uniques d’un { $component } avec excludeCombinations ne sont pas implémentées\\n\\nvariant-math-exclude-not-implemented = les variantes uniques d’un { $component } de type math avec exclude ne sont pas implémentées\\n\\nvariant-non-constant-exclude-not-implemented = les variantes uniques d’un { $component } avec un exclude non constant ne sont pas implémentées\\n\\n## PreFigure conversion\\n\\nprefigure-descendant-unsupported = { $subject } : non pris en charge par le rendu prefigure du graphique ; le descendant est ignoré.\\n\\nprefigure-descendant-invalid-geometry = { $subject } : géométrie non finie ou incomplète ; le descendant est ignoré.\\n\\nprefigure-curve-label-omitted = { $subject } : les étiquettes ne sont pas prises en charge sur les courbes converties ; l’étiquette est omise.\\n\\nprefigure-curve-unsupported-definition-type = { $subject } : type de définition de fonction de courbe « { $definitionType } » non pris en charge ; le descendant est ignoré.\\n\\nprefigure-region-flip-functions-unsupported = { $subject } : l’attribut flipFunctions de regionBetweenCurves n’est pas pris en charge ; le descendant est ignoré.\\n\\nprefigure-region-non-formula-child = { $subject } : seules les fonctions enfants de type formule sont prises en charge sur regionBetweenCurves ; le descendant est ignoré.\\n\\nprefigure-label-position-unsupported =\\n    { $subject } : labelPosition « { $labelPosition } » non pris en charge pour { $labelKind ->\\n        [line-family] une étiquette de la famille des droites\\n       *[point] une étiquette de point\\n    } ; l’alignement PreFigure par défaut est utilisé.\\n\\nprefigure-fill-style-unsupported = { $subject } : le style de remplissage « { $fillStyle } » n’est pas pris en charge par PreFigure ; un remplissage uni est utilisé.\\n\\nprefigure-line-style-unknown = { $subject } : style de trait « { $lineStyle } » inconnu, omis de la sortie PreFigure.\\n\\nprefigure-marker-style-mapped-to-diamond = { $subject } : le style de marqueur « { $markerStyle } » est converti en style PreFigure « diamond ».\\n\\nprefigure-marker-style-unsupported = { $subject } : le style de marqueur « { $markerStyle } » n’est pas pris en charge par PreFigure ; le style par défaut est utilisé.\\n\\n## PreFigure annotations\\n\\nannotation-ref-unresolvable = `<annotation>` : `ref` invalide ; cible non résolue. L’annotation est omise.\\n\\nannotation-ref-multiple-targets = `<annotation>` : `ref` s’est résolu en plusieurs cibles ; la première est utilisée.\\n\\nannotation-ref-outside-graph = `<annotation>` : `ref` invalide ; la cible est hors du graphique conteneur. L’annotation est omise.\\n\\nannotation-ref-unsupported-target = `<annotation>` : `ref` invalide ; la cible n’est pas un objet graphique pris en charge par la conversion prefigure. L’annotation est omise.\\n\\nannotation-text-missing = `<annotation>` : `text` absent ou vide ; un texte vide est émis.\\n\\n## Composites and references\\n\\ncomposite-circular-dependency =\\n    { $componentType ->\\n        [none] Dépendance circulaire détectée.\\n       *[other] Dépendance circulaire détectée impliquant un composant `<{ $componentType }>`.\\n    }\\n\\nreference-no-referent = Aucun référent trouvé pour la référence : `{ $reference }`\\n\\nreference-multiple-referents = Plusieurs référents trouvés pour la référence : `{ $reference }`\\n\\n## Children that do not match\\n\\nchildren-invalid-attribute-format = Format invalide pour l’attribut { $attribute } de `<{ $componentType }>`.\\n\\nchildren-invalid = Enfants invalides pour `<{ $componentType }>` : enfants invalides trouvés : { $children }\\n\\n## Falling back to a default\\n\\nattribute-value-invalid-using-default = Valeur `{ $value }` invalide pour l’attribut `{ $attribute }` ; la valeur `{ $default }` est utilisée\\n\\n## Loading a DoenetML version\\n\\ndoenetml-version-not-found =\\n    { $fallback ->\\n        [none] Version { $version } de DoenetML introuvable.\\n       *[other] Version { $version } de DoenetML introuvable. Repli sur la version { $fallback }\\n    }\\n\\n## Reading the DoenetML\\n\\nparse-invalid-doenetml = DoenetML invalide : { $content }\\n\\nparse-tag-missing-close-tag = DoenetML invalide : la balise `{ $tag }` n’a pas de balise fermante. Une balise auto-fermante ou une balise `</{ $tagName }>` était attendue.\\n\\nparse-tag-error = DoenetML invalide : erreur dans la balise `<{ $tagName }>`\\n\\nparse-attribute-missing-value = DoenetML invalide : il semble manquer une valeur à l’attribut `{ $attribute }`.\\n\\nparse-attribute-invalid = DoenetML invalide : attribut `{ $attribute }` invalide\\n\\nparse-attribute-value-invalid = DoenetML invalide : valeur d’attribut `{ $value }` invalide\\n\\nparse-attribute-value-quote-mismatch = DoenetML invalide : valeur d’attribut `{ $value }` invalide. Les guillemets ne correspondent pas. Il semble manquer un `{ $quote }`\\n\\nparse-open-tag-name-missing = DoenetML invalide : balise trouvée sans nom de balise, par exemple `<`\\n\\nparse-tag-not-closed = DoenetML invalide : la balise `{ $tag }` n’a pas été fermée (il semble manquer un `>`).\\n\\nparse-self-closing-tag-name-missing = DoenetML invalide : balise trouvée sans nom de balise `<{ $content }>`\\n\\nparse-self-closing-tag-not-closed = DoenetML invalide : la balise `{ $tag }` n’a pas été fermée (il semble manquer `/>`).\\n\\nparse-tag-invalid-attributes = DoenetML invalide : la balise `{ $tag }` n’est pas valide. Ses attributs sont peut-être incorrects.\\n\\nparse-close-tag-name-missing = DoenetML invalide : balise fermante trouvée sans nom de balise, par exemple `</`\\n\\nparse-attribute-value-unquoted = Les valeurs d’attribut doivent être entre guillemets : `{ $attribute }=\"{ $value }\"`\\n\\nparse-close-tag-without-open-tag = DoenetML invalide : balise fermante `{ $tag }` trouvée, mais aucune balise ouvrante correspondante\\n\\nparse-close-tag-mismatched = DoenetML invalide : balise fermante incohérente. `</{ $expected }>` était attendu. `{ $found }` a été trouvé\\n\\nparser-node-unconvertible = Impossible de convertir le nœud { $node } en nœud Dast.\\n\\n## Names\\n\\nname-attribute-invalid =\\n    Attribut name=\\'{ $name }\\' invalide. { $reason ->\\n        [characters] Un nom ne peut contenir que des lettres, des chiffres, des tirets bas ou des traits d’union.\\n       *[start] Un nom doit commencer par une lettre.\\n    }\\n\\ncomponent-name-invalid-start = Nom de composant « { $name } » invalide. Un nom doit commencer par une lettre.\\n\\n## `<answer>` sugar\\n\\nanswer-video-watched-missing-video = Un answer de type videoWatched doit avoir un attribut video\\n\\nanswer-video-watched-video-not-reference = Un answer de type videoWatched doit avoir un attribut video qui est une référence\\n\\nanswer-name-not-single-text = L’attribut name d’un answer doit avoir un unique enfant de type texte\\n\\n## Referencing another document\\n\\nexternal-doenetml-recursion-limit = Impossible de récupérer le DoenetML externe : trop de niveaux de récursion. Y a-t-il une référence circulaire ?\\n\\nexternal-doenetml-unavailable = Impossible de récupérer le DoenetML depuis { $attribute }=\"{ $uri }\"\\n\\nexternal-doenetml-type-mismatch = DoenetML invalide récupéré depuis { $attribute }=\"{ $uri }\" : il ne correspond pas au type de composant « { $componentType } »\\n\\n## Deprecated syntax\\n\\ndeprecated-attribute-renamed =\\n    { $component ->\\n        [none] [deprecation] L’attribut `{ $from }` est obsolète ; utilisez `{ $to }`.\\n       *[other] [deprecation] L’attribut `{ $from }` de `<{ $component }>` est obsolète ; utilisez `{ $to }`.\\n    }\\n\\ndeprecated-attribute-renamed-conflict =\\n    { $component ->\\n        [none] [deprecation] L’attribut `{ $from }` est obsolète et ignoré, car `{ $to }` est également spécifié.\\n       *[other] [deprecation] L’attribut `{ $from }` de `<{ $component }>` est obsolète et ignoré, car `{ $to }` est également spécifié.\\n    }\\n\\ndeprecated-attribute-ignored = [deprecation] L’attribut `{ $attribute }` de `<{ $component }>` est obsolète et ignoré.\\n\\n\\n## Language coverage\\n\\npluralize-english-only = `<pluralize>` ne sait mettre au pluriel que l’anglais ; son texte est laissé tel quel dans un document écrit en { $locale }. Écrivez le pluriel directement, ou indiquez-le avec l’attribut `pluralForm`.\\n\\n\\n## Checking against the schema\\n\\nschema-element-unrecognized = L’élément `<{ $tag }>` n’est pas un élément Doenet reconnu.\\n\\nschema-element-not-allowed-at-root = L’élément `<{ $tag }>` n’est pas autorisé à la racine du document.\\n\\nschema-element-not-allowed-inside = L’élément `<{ $tag }>` n’est pas autorisé dans `<{ $parent }>`.\\n\\nschema-attribute-unrecognized = L’élément `<{ $tag }>` n’a pas d’attribut nommé `{ $attribute }`.\\n\\nschema-attribute-value-not-allowed =\\n    { $isList ->\\n        [true] L’attribut `{ $attribute }` de l’élément `<{ $tag }>` doit être une liste dont chaque élément vaut l’un de : { $allowed }\\n       *[other] L’attribut `{ $attribute }` de l’élément `<{ $tag }>` doit valoir l’un de : { $allowed }\\n    }\\n\\n\\n## The `<select>` family\\'s error boxes\\n\\nselect-variant-name-option-count-mismatch = Nom de variante invalide pour select. Le nom de variante { $variantName } apparaît dans { $numOptions } options, mais le nombre à sélectionner est { $numToSelect }.\\n\\nselect-variant-name-without-options = Des variantes sont spécifiées pour select, mais aucune option ne l’est pour le nom de variante possible : { $variantName }.\\n\\nselect-variant-name-not-possible = Le nom de variante { $variantName } spécifié pour select n’est pas un nom de variante possible.\\n\\nselect-too-few-options = Impossible de sélectionner { $numToSelect } composants parmi seulement { $numOptions }.\\n\\nselect-from-sequence-too-few-values = Impossible de sélectionner { $numToSelect } valeurs dans une suite de longueur { $length }.\\n\\nselect-from-sequence-indices-count-mismatch = Le nombre d’indices spécifiés pour select doit correspondre au nombre à sélectionner\\n\\nselect-from-sequence-indices-not-integers = Tous les indices spécifiés pour select doivent être des entiers\\n\\nselect-from-sequence-index-excluded = Un indice spécifié de selectfromsequence était exclu\\n\\nselect-from-sequence-indices-excluded-combination = Les indices spécifiés de selectfromsequence formaient une combinaison exclue\\n\\nselect-from-sequence-coprime-not-positive-integers = Impossible de sélectionner des combinaisons d’entiers premiers entre eux, car la sélection ne porte pas sur des entiers positifs.\\n\\nselect-from-sequence-coprime-common-factor = Impossible de sélectionner des nombres premiers entre eux. Toutes les valeurs possibles ont un facteur commun. (Les valeurs spécifiées de \"from\" ou \"to\" doivent être premières avec \"step\".)\\n\\nselect-from-sequence-coprime-single-number = Impossible de sélectionner des combinaisons de nombres premiers entre eux à partir d’un seul nombre différent de 1.\\n\\nselect-from-sequence-excluded-too-many-combinations = Plus de 70 % des combinaisons ont été exclues dans selectFromSequence\\n\\nselect-from-sequence-coprime-none-found = Impossible de sélectionner des nombres premiers entre eux. Toutes les valeurs possibles ont un facteur commun.\\n\\nselect-from-sequence-too-few-unique-values = Impossible de sélectionner { $numToSelect } valeurs distinctes dans une suite de longueur { $numPossibleValues }\\n\\nselect-prime-numbers-too-few-values = Impossible de sélectionner { $numToSelect } valeurs dans une liste de { $numValues } nombres premiers\\n\\nselect-prime-numbers-values-count-mismatch = Le nombre de valeurs spécifiées pour select doit correspondre au nombre à sélectionner\\n\\nselect-prime-numbers-values-not-prime = Toutes les valeurs spécifiées pour select prime number doivent figurer dans la liste des nombres premiers\\n\\nselect-prime-numbers-values-excluded-combination = Les valeurs spécifiées de selectPrimeNumbers formaient une combinaison exclue\\n\\nselect-prime-numbers-excluded-too-many-combinations = Plus de 70 % des combinaisons ont été exclues dans selectPrimeNumbers\\n\\nselect-random-combination-fluke = Par un hasard extrêmement improbable, aucune combinaison de valeurs aléatoires n’a pu être sélectionnée\\n\\nselect-random-value-fluke = Par un hasard extrêmement improbable, aucune valeur aléatoire n’a pu être sélectionnée\\n';\nexport {\n  diagnostics as default\n};\n//# sourceMappingURL=diagnostics-Dv3tKIJO.js.map\n"],"names":[],"mappings":"AAAK,MAAC,cAAc;"}

package/diagnostics-Ym7cNYqW-Ym7cNYqW.js

@@ -0,0 +1,5 @@
+const diagnostics = '# Spanish diagnostics. Translated from `locales/en/diagnostics.ftl`, which is\n# the source of truth: `lint:i18n` rejects a key that does not exist there, and\n# reports a key that exists there but not here as missing coverage.\n#\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\n# Correct anything here freely; nothing in it was written by a translator.\n#\n# Attribute names, element names and every other DoenetML identifier —\n# `through`, `endpoint`, `midpointOffset`, `numDimensions`, `<answer>`,\n# `selectFromSequence` — are part of the language, not prose, and stay in\n# English exactly as written. So does anything quoted back from the author\'s\n# own source.\n\n## `<lineSegment>`\n\nline-segment-attributes-ignored-with-endpoints =\n    { $attributesCount ->\n        [one] { $attributes } se ignora cuando se especifican los dos extremos\n       *[other] { $attributes } se ignoran cuando se especifican los dos extremos\n    }\n\nline-segment-attributes-ignored-with-endpoint-and-midpoint =\n    { $attributesCount ->\n        [one] { $attributes } se ignora cuando se especifican un extremo y el punto medio\n       *[other] { $attributes } se ignoran cuando se especifican un extremo y el punto medio\n    }\n\nline-segment-midpoint-offset-without-midpoint = midpointOffset no tiene efecto sin un punto medio\n\n## `<line>`\n\n# «Recta», not «línea», even though `noun.line` in content.ftl says «línea»:\n# not an inconsistency but the difference between describing the stroke that\n# was drawn («una línea azul gruesa») and naming the geometric object, which in\n# mathematics is a recta — hence «la ecuación de la recta».\n\nline-points-undetermined-dimensions = La recta pasa por puntos de dimensiones indeterminadas.\n\nline-points-too-few-dimensions = La recta debe pasar por puntos de al menos dos dimensiones.\n\nline-points-depend-on-variables = La recta pasa por puntos que dependen de las variables: { $variables }.\n\n# Enumerated with a comma rather than «y»: `<line>`\'s variables default to `x`\n# and `y`, and «en las variables x y y» would be both wrong — before an /i/\n# sound the conjunction is «e» — and unreadable. A comma is correct whatever\n# the variables are named, which is not known here in advance.\nline-equation-invalid-format = Formato no válido para la ecuación de la recta en las variables { $variable1 }, { $variable2 }.\n\n## `<ray>`\n\nray-overprescribed-through = La semirrecta está determinada por through, endpoint y direction. Se ignora el through especificado.\n\nray-dimension-mismatch = Discrepancia de numDimensions en la semirrecta.\n\n## `<vector>`\n\nvector-overprescribed-head = El vector está determinado por head, tail y displacement. Se ignora el head especificado.\n\nvector-dimension-mismatch = Discrepancia de numDimensions en el vector.\n\n## Attracting and constraining\n\nattract-to-without-nearest-point = No se puede atraer a un `<{ $component }>` porque no tiene la variable de estado nearestPoint.\n\nconstrain-to-without-nearest-point = No se puede restringir a un `<{ $component }>` porque no tiene la variable de estado nearestPoint.\n\nconstrain-to-interior-without-nearest-point = No se puede restringir al interior de un `<{ $component }>` porque no tiene la variable de estado nearestPoint.\n\n## `<choiceInput>`\n\nchoice-input-label-position-ignored = labelPosition se ignora en un choiceInput que no es inline\n\n## Ordering children by index\n\nchoice-input-indices-count-mismatch = Se ignoran los índices especificados para choiceInput porque su cantidad no coincide con la cantidad de hijos choice.\n\npretzel-indices-count-mismatch = Se ignoran los índices especificados para problem porque su cantidad no coincide con la cantidad de hijos problem.\n\nshuffle-indices-count-mismatch = Se ignoran los índices especificados para shuffle porque su cantidad no coincide con la cantidad de componentes.\n\nindices-ignored-out-of-range = Se ignoran los índices especificados para { $component } porque algunos están fuera de rango.\n\npretzel-indices-repeated = Se ignoran los índices especificados para pretzel porque algunos están repetidos.\n\npretzel-circuit-first-index = Se ignoran los índices especificados para pretzel en modo circuit porque el primer índice debe ser 1.\n\n## `<shuffle>` and `<sort>`\n\nstring-children-need-type = Para que `<{ $component }>` funcione con hijos de texto, se debe especificar el atributo `type`.\n\ninvalid-type-defaulting-to-math = Tipo no válido { $type } para el componente { $component }. Debe ser math, text, number o boolean. Se usa math.\n\nstring-not-valid-component-to-arrange = La cadena "{ $value }" no es un componente válido para { $component }. Se ignora.\n\n## Types and variables\n\ninvalid-type-defaulting-to-number = Tipo no válido { $type }, se establece el tipo en number.\n\ninvalid-variable-value = Valor no válido de una variable: `{ $value }`\n\n## Variants\n\nvariant-index-must-be-number = El índice de variante { $index } debe ser un número\n\nvariant-index-must-be-integer = El índice de variante { $index } debe ser un número entero\n\n## `<sideBySide>`\n\nside-by-side-absolute-widths = `<{ $component }>` no está implementado para medidas absolutas. Los anchos se establecen como relativos.\n\nside-by-side-absolute-margins = `<{ $component }>` no está implementado para medidas absolutas. Los márgenes se establecen como relativos.\n\nside-by-side-no-block-child = `<{ $component }>` no es válido: debe tener al menos un hijo de bloque.\n\n## `<label>`\n\nlabel-for-ignored-on-graphical = Se ignora el atributo `for` en un `<label>` gráfico.\n\nlabel-for-must-resolve-to-one = El atributo `for` de `<label>` debe corresponder exactamente a un componente.\n\nlabel-for-unresolved = No se pudo resolver el atributo `for` de `<label>` a un componente.\n\nlabel-for-answer-with-authored-inputs = El atributo `for` de `<label>` hace referencia a un `<answer>` con entradas escritas explícitamente; haz referencia a la entrada directamente.\n\nlabel-for-answer-without-input = El atributo `for` de `<label>` hace referencia a un `<answer>` que no tiene ninguna entrada que etiquetar.\n\nlabel-for-must-reference-input-or-answer = El atributo `for` de `<label>` debe hacer referencia a una entrada o a un `<answer>`.\n\n## Accessibility\n\naccessibility-short-description-or-decorative = Por accesibilidad, `<{ $component }>` debe tener una descripción breve o estar marcado como decorativo.\n\naccessibility-video-short-description = Por accesibilidad, `<video>` debe tener una descripción breve.\n\naccessibility-input-short-description-or-label = Por accesibilidad, `<{ $component }>` debe tener una descripción breve o una etiqueta.\n\naccessibility-answer-input-short-description-or-label = Por accesibilidad, la entrada creada por un `<answer>` debe tener una descripción breve o una etiqueta.\n\naccessibility-short-description-contains-math = Las descripciones breves no deben contener componentes matemáticos como `<{ $component }>`. Expresa las matemáticas con palabras.\n\naccessibility-section-title-insufficient-contrast =\n    { $mode ->\n        [dark] { $colorName } no tiene suficiente contraste con el texto del encabezado de sección (modo oscuro) ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1).\n       *[other] { $colorName } no tiene suficiente contraste con el texto del encabezado de sección ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1).\n    }\n\n## `<circle>`\n\ncircle-through-points-non-numerical = No está implementado un `<circle>` que pase por { $count } puntos cuando los puntos no tienen valores numéricos.\n\ncircle-too-many-through-points = No se puede calcular una circunferencia que pase por más de 3 puntos.\n\ncircle-overprescribed-radius-center-points = No se puede calcular una circunferencia con radio, centro y puntos de paso especificados a la vez.\n\ncircle-center-with-multiple-points = No se puede calcular una circunferencia con centro especificado que pase por más de 1 punto.\n\ncircle-radius-too-small = No se puede calcular la circunferencia: dado que la distancia entre los dos puntos es { $distance }, el radio especificado { $radius } es demasiado pequeño.\n\ncircle-radius-with-many-points = No se puede crear una circunferencia que pase por más de dos puntos con un radio especificado.\n\ncircle-invalid-center-or-through-points = El centro o los puntos de paso de la circunferencia no son válidos.\n\ncircle-radius-center-with-multiple-points = No se puede calcular el radio de una circunferencia con centro especificado que pase por más de 1 punto.\n\ncircle-change-radius-non-numerical = No se puede cambiar el radio de una circunferencia con puntos de paso no numéricos\n\ncircle-radius-with-points-non-numerical = No se puede crear una circunferencia que pase por más de un punto con un radio especificado cuando no hay valores numéricos.\n\ncircle-change-center-non-numerical = No está implementado cambiar el centro de una circunferencia que pasa por puntos con valores no numéricos.\n\n## `<function>`\n\nfunction-domain-insufficient-dimensions =\n    { $intervals ->\n        [one] Dimensiones insuficientes para el dominio de la función. El dominio tiene { $intervals } intervalo pero la función tiene { $inputs ->\n            [one] { $inputs } entrada\n           *[other] { $inputs } entradas\n        }.\n       *[other] Dimensiones insuficientes para el dominio de la función. El dominio tiene { $intervals } intervalos pero la función tiene { $inputs ->\n            [one] { $inputs } entrada\n           *[other] { $inputs } entradas\n        }.\n    }\n\nfunction-domain-invalid-format = Formato no válido para el dominio de la función.\n\nfunction-ignoring-non-numerical =\n    { $type ->\n        [maximum] Se ignora el máximo no numérico de la función.\n        [minimum] Se ignora el mínimo no numérico de la función.\n        [extremum] Se ignora el extremo no numérico de la función.\n        [point] Se ignora el punto no numérico de la función.\n        [slope] Se ignora la pendiente no numérica de la función.\n       *[other] Se ignora { $type } no numérico de la función.\n    }\n\nfunction-ignoring-empty =\n    { $type ->\n        [maximum] Se ignora el máximo vacío de la función.\n        [minimum] Se ignora el mínimo vacío de la función.\n        [extremum] Se ignora el extremo vacío de la función.\n        [point] Se ignora el punto vacío de la función.\n       *[other] Se ignora { $type } vacío de la función.\n    }\n\nfunction-points-too-close = La función contiene dos puntos demasiado próximos entre sí. No se puede definir la función.\n\nfunction-iterates-input-output-mismatch =\n    { $inputs ->\n        [one] Las iteraciones de una función solo son posibles si el número de entradas es igual al número de salidas. Esta función tiene { $inputs } entrada y { $outputs ->\n            [one] { $outputs } salida\n           *[other] { $outputs } salidas\n        }.\n       *[other] Las iteraciones de una función solo son posibles si el número de entradas es igual al número de salidas. Esta función tiene { $inputs } entradas y { $outputs ->\n            [one] { $outputs } salida\n           *[other] { $outputs } salidas\n        }.\n    }\n\n## `<sequence>`\n\nsequence-invalid-length = Longitud de la secuencia no válida. Debe ser un entero no negativo.\n\nsequence-invalid-step = Paso de la secuencia no válido. Debe ser un número para una secuencia de tipo { $type }.\n\nsequence-invalid-endpoint-number = El valor de "{ $attribute }" de la secuencia numérica no es válido. Debe ser un número.\n\nsequence-invalid-endpoint-letters = El valor de "{ $attribute }" de la secuencia de letras no es válido. Debe ser una combinación de letras.\n\nsequence-invalid-endpoint = El valor de "{ $attribute }" de la secuencia no es válido.\n\nselect-from-sequence-coprime-not-numbers = Se ignora coprime porque no se están seleccionando números\n\nselect-from-sequence-coprime-with-exclude-combinations = Se ignora coprime porque se especificó excludeCombinations\n\n## Resolving a `target`\n\ntarget-not-found = Destino no válido para `<{ $source }>`: no se encuentra el destino.\n\ntarget-state-variable-not-found = Destino no válido para `<{ $source }>`: no se encuentra una variable de estado llamada "{ $property }" en un `<{ $component }>`.\n\n## `<odeSystem>`\n\node-system-variables-match-independent = Las variables de `<odeSystem>` deben ser distintas de la variable independiente.\n\node-system-duplicate-variable-names = No se pueden definir las funciones del lado derecho de la EDO con nombres de variables dependientes repetidos.\n\node-system-rhs-function-error = No se puede definir la función del lado derecho de la EDO. Error al crear la función de mathjs.\n\n## `<angle>`, `<parabola>`, and `<intersection>`\n\nangle-too-many-lines = No se puede definir un ángulo entre { $count } rectas\n\nangle-invalid-through-point = Punto no válido en through de `<angle>`\n\nparabola-vertex-too-many-points = No está implementada una parábola con vértice que pase por más de 1 punto.\n\nparabola-too-many-points = No está implementada una parábola que pase por más de 3 puntos.\n\nintersection-too-many-items = No está implementada la intersección de más de dos objetos\n\n## Other math components\n\nionic-compound-not-two-ions = No está implementado el compuesto iónico para algo distinto de dos iones.\n\nionic-compound-needs-cation-and-anion = El compuesto iónico solo está implementado para un catión y un anión.\n\nsolve-equations-cannot-evaluate = No se puede resolver la ecuación porque no se pudo evaluar: { $equation }\n\nmath-operators-operand-number-required = Se debe especificar operandNumber al extraer un operando matemático.\n\neigen-decomposition-failed = No se pudieron calcular los valores propios de la matriz\n\n## `<matchesPattern>`\n\nmatches-pattern-parameter-not-in-pattern =\n    { $parametersCount ->\n        [one] `<matchesPattern>`: el parámetro { $parameters } no aparece en el patrón, por lo que siempre coincidirá con un espacio en blanco.\n       *[other] `<matchesPattern>`: los parámetros { $parameters } no aparecen en el patrón, por lo que siempre coincidirán con un espacio en blanco.\n    }\n\n## `<graph>`\n\ngraph-grid-invalid = `<graph>`: no se puede interpretar grid="{ $grid }". Debe ser none, medium, dense o dos números positivos separados por un espacio, como grid="1 0.5". No se dibuja ninguna cuadrícula.\n\n## PreFigure renderer\n\nprefigure-x-label-position-unsupported = `<graph>`: xLabelPosition="left" no es compatible con el renderizador prefigure; se usa el comportamiento de posición derecha.\n\nprefigure-y-label-position-unsupported = `<graph>`: yLabelPosition="bottom" no es compatible con el renderizador prefigure; se usa el comportamiento de posición superior.\n\nprefigure-invalid-axis-bounds = `<graph>`: los límites de los ejes no son válidos para la conversión a prefigure; se usa el bbox predeterminado (-10,-10,10,10).\n\nprefigure-invalid-width = `<graph>`: el ancho no es válido para la conversión a prefigure; se usa el ancho de diagrama predeterminado 425.\n\nprefigure-invalid-aspect-ratio = `<graph>`: aspectRatio no es válido para la conversión a prefigure; se usa la relación de aspecto predeterminada 1.\n\nprefigure-grid-spacing-too-fine = `<graph>`: el espaciado de la cuadrícula es demasiado fino para los límites de los ejes; se omite la cuadrícula en el renderizador prefigure.\n\nprefigure-annotations-not-rendered = `<graph>`: las anotaciones no se representan si no se usa el renderizador PreFigure.\n\nmultiple-annotations-children = Se encontraron varios hijos `<annotations>` en `<graph>`; se ignoran todos menos el último.\n\n## Referring to other components\n\ncopy-unrecognized-component-type = No se puede extender ni copiar un tipo de componente desconocido: { $type }.\n\ncopy-prop-not-found = No se encontró la propiedad { $property } en un componente de tipo { $component }\n\ncollect-no-source = No se encontró ninguna fuente para collect.\n\ncollect-invalid-component-type = No se pueden recolectar componentes de tipo `<{ $component }>` porque no es un tipo de componente válido.\n\nreference-index-unavailable = No se puede referenciar el índice `{ $reference }`\n\n## `<callAction>`\n\ncomponent-action-unavailable = No se puede llamar a { $action } en el componente `{ $reference }`\n\n## `<dataFrame>`\n\ndata-frame-inconsistent-row-lengths = Los datos tienen una forma no válida.  Las filas tienen longitudes distintas. Encontrado en componentIdx :{ $componentIdx }\n\ndata-frame-duplicate-column-names = Los datos tienen nombres de columna repetidos.  Encontrado en componentIdx :{ $componentIdx }\n\ndata-frame-missing-column-name = A los datos les falta el nombre de una columna.  Encontrado en componentIdx :{ $componentIdx }\n\n## `<answer>` and scoring\n\nanswer-award-depends-on-own-response = Un award de esta respuesta depende de la respuesta enviada por el propio answer, lo que provocará un comportamiento inesperado.\n\nanswer-max-num-attempts-in-section-wide-check-work = Establecer `maxNumAttempts` en un `<answer>` dentro de un contenedor con `sectionWideCheckWork` no tiene efecto, porque el número de intentos lo controla el contenedor. Establece `maxNumAttempts` en el contenedor.\n\nnested-section-wide-check-work-max-num-attempts = Establecer `maxNumAttempts` en un contenedor con `sectionWideCheckWork` que está dentro de otro contenedor con `sectionWideCheckWork` no tiene efecto, porque el número de intentos lo controla el contenedor exterior. Establece `maxNumAttempts` en el contenedor exterior.\n\nanswer-attributes-need-symbolic-equality =\n    { $attributesCount ->\n        [one] El atributo { $attributes } no tendrá efecto si no se establece symbolicEquality.\n       *[other] Los atributos { $attributes } no tendrán efecto si no se establece symbolicEquality.\n    }\n\nanswer-invalid-type = Tipo no válido para answer: { $type }\n\n## `<module>`, `<conditionalContent>`, `<slider>`, `<pretzel>`\n\nmodule-attribute-child-needs-name = Como el componente `<{ $component }>` no tiene nombre, no se puede usar como atributo de módulo\n\nmodule-attribute-name-already-defined = El componente `<{ $component } name="{ $name }">` no se puede usar como atributo de un módulo porque el tipo de componente `<module>` ya tiene definido un atributo "{ $name }".\n\nconditional-content-condition-ignored = Se ignora el atributo `condition` en un `<conditionalContent>` que tiene hijos case o else.\n\nslider-markers-type-mismatch = El tipo de los marcadores no coincide con el tipo del slider.\n\npretzel-problem-needs-statement-and-answer = Pretzel no válido: cada `<problem>` debe contener un `<statement>` y un `<answer>`.\n\npretzel-circuit-first-problem-distractor = Pretzel no válido: en mode="circuit", el primer `<problem>` no puede ser un distractor.\n\n## Attribute values\n\nattribute-invalid-values =\n    { $valuesCount ->\n        [one] Valor no válido { $values } para el atributo `{ $attribute }`; se ignora.\n       *[other] Valores no válidos { $values } para el atributo `{ $attribute }`; se ignoran.\n    }\n\nattribute-must-be-references = Valor no válido `{ $value }` para el atributo `{ $attribute }`. El atributo debe estar compuesto de referencias que empiecen por `$`.\n\nmath-input-invalid-function-names = <mathInput>: se ignoran nombres de función no válidos en { $attribute }: { $names }. El segmento visible de cada nombre debe tener al menos 2 caracteres (letras o guiones); puede añadirse un sufijo opcional `|<alternativa de mathspeak>`.\n\n## Building components from the source\n\ncomponent-type-invalid = Tipo de componente no válido: `<{ $componentType }>`\n\nattribute-repeated = No se puede repetir el atributo { $attribute }.\n\nattribute-invalid-for-component = Atributo "{ $attribute }" no válido para un componente de tipo `<{ $componentType }>`.\n\n## Style definition contrast\n\nstyle-definition-insufficient-contrast =\n    La definición de estilo { $styleNumber } no tiene suficiente contraste para { $context ->\n        [text-on-background] el color del texto sobre el color de fondo\n        [high-contrast] el color de alto contraste sobre el lienzo\n        [line] el color de las líneas sobre el lienzo\n        [marker] el color de los marcadores sobre el lienzo\n       *[text-on-canvas] el color del texto sobre el lienzo\n    }{ $mode ->\n        [dark] { " (modo oscuro)" }\n       *[light] { "" }\n    } ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1).\n\nstyle-definition-dark-mode-text-background-contrast =\n    Aunque la definición de estilo { $styleNumber } especifica colores con suficiente contraste en modo claro, los colores de modo oscuro derivados de esos valores no tienen suficiente contraste entre el color del texto y el color de fondo ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1). { $suggestion ->\n        [available] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro (por ejemplo, con { $lightAttribute }="{ $lightColor }") o define el color de modo oscuro (por ejemplo, con { $darkAttribute }="{ $darkColor }").\n       *[none] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro o sustituye los colores derivados mediante textColorDarkMode o backgroundColorDarkMode.\n    }\n\nstyle-definition-dark-mode-text-canvas-contrast =\n    Aunque la definición de estilo { $styleNumber } especifica un color de texto con suficiente contraste en modo claro, el color de texto de modo oscuro derivado de ese valor no tiene suficiente contraste sobre el lienzo ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1). { $suggestion ->\n        [available] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro (por ejemplo, con textColor="{ $lightColor }") o define el color de modo oscuro (por ejemplo, con textColorDarkMode="{ $darkColor }").\n       *[none] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro o sustituye el color derivado mediante textColorDarkMode.\n    }\n\nsection-multiple-style-palettes = Una sección solo puede seleccionar un <stylePalette>; se usará el último.\n\n## Unique variants\n\nvariant-num-to-select-not-non-negative-integer = no se pueden determinar las variantes únicas de { $component } porque numToSelect no es un entero no negativo.\n\nvariant-num-to-select-not-constant-number = no se pueden determinar las variantes únicas de { $component } porque numToSelect no es un número constante.\n\nvariant-with-replacement-not-constant-boolean = no se pueden determinar las variantes únicas de { $component } porque withReplacement no es un booleano constante.\n\nvariant-select-weight-disables-unique = Las variantes únicas quedan desactivadas en select si alguna opción especifica selectWeight o selectForVariants\n\nvariant-coprime-undetermined = no se pueden determinar las variantes únicas de { $component } porque no se puede determinar si coprime es siempre falso.\n\nvariant-attribute-not-constant = no se pueden determinar las variantes únicas de { $component } porque { $attribute } no es constante.\n\nvariant-attribute-not-number = no se pueden determinar las variantes únicas de { $component } porque { $attribute } no es un número.\n\nvariant-attribute-wrong-type-for-sequence =\n    no se pueden determinar las variantes únicas de { $component } de tipo { $type } porque { $attribute } no es { $expected ->\n        [letters-combination] una combinación de letras\n        [math-expression] una expresión matemática válida\n        [integer] un entero\n       *[number] un número\n    }.\n\nvariant-length-not-integer = no se pueden determinar las variantes únicas de { $component } porque length no es un entero.\n\nvariant-sort-not-implemented = no se han implementado las variantes únicas de un { $component } con sort\n\nvariant-exclude-combinations-not-implemented = no se han implementado las variantes únicas de un { $component } con excludeCombinations\n\nvariant-math-exclude-not-implemented = no se han implementado las variantes únicas de un { $component } de tipo math con exclude\n\nvariant-non-constant-exclude-not-implemented = no se han implementado las variantes únicas de un { $component } con exclude no constante\n\n## PreFigure conversion\n\nprefigure-descendant-unsupported = { $subject }: no se admite en el renderizador prefigure de gráficos; se omite el descendiente.\n\nprefigure-descendant-invalid-geometry = { $subject }: geometría no finita o incompleta; se omite el descendiente.\n\nprefigure-curve-label-omitted = { $subject }: las etiquetas no se admiten en los elementos de curva convertidos; se omite la etiqueta.\n\nprefigure-curve-unsupported-definition-type = { $subject }: tipo de definición de función de curva no admitido \'{ $definitionType }\'; se omite el descendiente.\n\nprefigure-region-flip-functions-unsupported = { $subject }: atributo flipFunctions no admitido en regionBetweenCurves; se omite el descendiente.\n\nprefigure-region-non-formula-child = { $subject }: en regionBetweenCurves solo se admiten funciones hijas de tipo fórmula; se omite el descendiente.\n\nprefigure-label-position-unsupported =\n    { $subject }: labelPosition \'{ $labelPosition }\' no admitido para { $labelKind ->\n        [line-family] una etiqueta de la familia de líneas\n       *[point] una etiqueta de punto\n    }; se usa la alineación predeterminada de PreFigure.\n\nprefigure-fill-style-unsupported = { $subject }: PreFigure no admite el estilo de relleno \'{ $fillStyle }\'; se usa un relleno sólido.\n\nprefigure-line-style-unknown = { $subject }: estilo de línea desconocido \'{ $lineStyle }\'; se omite de la salida de PreFigure.\n\nprefigure-marker-style-mapped-to-diamond = { $subject }: el estilo de marcador \'{ $markerStyle }\' se asigna al estilo \'diamond\' de PreFigure.\n\nprefigure-marker-style-unsupported = { $subject }: PreFigure no admite el estilo de marcador \'{ $markerStyle }\'; se usa el estilo predeterminado.\n\n## PreFigure annotations\n\nannotation-ref-unresolvable = `<annotation>`: `ref` no válido; no se puede resolver el destino. Se omite la anotación.\n\nannotation-ref-multiple-targets = `<annotation>`: `ref` se resolvió a varios destinos; se usa el primero.\n\nannotation-ref-outside-graph = `<annotation>`: `ref` no válido; el destino está fuera del gráfico que lo contiene. Se omite la anotación.\n\nannotation-ref-unsupported-target = `<annotation>`: `ref` no válido; el destino no es un objeto gráfico admitido en la conversión a prefigure. Se omite la anotación.\n\nannotation-text-missing = `<annotation>`: falta `text` o está vacío; se emite texto vacío.\n\n## Composites and references\n\ncomposite-circular-dependency =\n    { $componentType ->\n        [none] Se detectó una dependencia circular.\n       *[other] Se detectó una dependencia circular en la que participa un componente `<{ $componentType }>`.\n    }\n\nreference-no-referent = No se encontró ningún referente para la referencia: `{ $reference }`\n\nreference-multiple-referents = Se encontraron varios referentes para la referencia: `{ $reference }`\n\n## Children that do not match\n\nchildren-invalid-attribute-format = Formato no válido para el atributo { $attribute } de `<{ $componentType }>`.\n\nchildren-invalid = Hijos no válidos para `<{ $componentType }>`: se encontraron hijos no válidos: { $children }\n\n## Falling back to a default\n\nattribute-value-invalid-using-default = Valor no válido `{ $value }` para el atributo `{ $attribute }`; se usa el valor `{ $default }`\n\n## Loading a DoenetML version\n\ndoenetml-version-not-found =\n    { $fallback ->\n        [none] No se encontró la versión { $version } de DoenetML.\n       *[other] No se encontró la versión { $version } de DoenetML. Se recurrirá a la versión { $fallback }\n    }\n\n## Reading the DoenetML\n\n# These messages quote the author\'s own text — `$tag`, `$value`, `$attribute`\n# — which is reproduced exactly as written.\n\nparse-invalid-doenetml = DoenetML no válido: { $content }\n\nparse-tag-missing-close-tag = DoenetML no válido: la etiqueta `{ $tag }` no tiene etiqueta de cierre. Se esperaba una etiqueta autocerrada o una etiqueta `</{ $tagName }>`.\n\nparse-tag-error = DoenetML no válido: error en la etiqueta `<{ $tagName }>`\n\nparse-attribute-missing-value = DoenetML no válido: parece que al atributo `{ $attribute }` le falta un valor.\n\nparse-attribute-invalid = DoenetML no válido: atributo no válido `{ $attribute }`\n\nparse-attribute-value-invalid = DoenetML no válido: valor de atributo no válido `{ $value }`\n\n# $quote is the quotation mark that would close the pair: `"` or `\'`.\nparse-attribute-value-quote-mismatch = DoenetML no válido: valor de atributo no válido `{ $value }`. Las comillas no coinciden. Parece que falta una `{ $quote }`\n\nparse-open-tag-name-missing = DoenetML no válido: se encontró una etiqueta sin nombre, por ejemplo `<`\n\nparse-tag-not-closed = DoenetML no válido: la etiqueta `{ $tag }` no se cerró (parece que falta un `>`).\n\nparse-self-closing-tag-name-missing = DoenetML no válido: se encontró una etiqueta sin nombre `<{ $content }>`\n\nparse-self-closing-tag-not-closed = DoenetML no válido: la etiqueta `{ $tag }` no se cerró (parece que falta `/>`).\n\nparse-tag-invalid-attributes = DoenetML no válido: la etiqueta `{ $tag }` no es válida. Puede que tenga atributos incorrectos.\n\nparse-close-tag-name-missing = DoenetML no válido: se encontró una etiqueta de cierre sin nombre, por ejemplo `</`\n\nparse-attribute-value-unquoted = Los valores de los atributos deben ir entre comillas: `{ $attribute }="{ $value }"`\n\nparse-close-tag-without-open-tag = DoenetML no válido: se encontró la etiqueta de cierre `{ $tag }`, pero no hay ninguna etiqueta de apertura que le corresponda\n\nparse-close-tag-mismatched = DoenetML no válido: la etiqueta de cierre no coincide. Se esperaba `</{ $expected }>`. Se encontró `{ $found }`\n\nparser-node-unconvertible = No se pudo convertir el nodo { $node } en un nodo Dast.\n\n## Names\n\nname-attribute-invalid =\n    Atributo name=\'{ $name }\' no válido. { $reason ->\n        [characters] Los nombres solo pueden contener letras, números, guiones bajos o guiones.\n       *[start] Los nombres deben empezar por una letra.\n    }\n\ncomponent-name-invalid-start = Nombre de componente "{ $name }" no válido. Los nombres deben empezar por una letra.\n\n## `<answer>` sugar\n\nanswer-video-watched-missing-video = Un `<answer>` de tipo videoWatched debe tener un atributo video\n\nanswer-video-watched-video-not-reference = Un `<answer>` de tipo videoWatched debe tener un atributo video que sea una referencia\n\nanswer-name-not-single-text = El atributo name de `<answer>` debe tener un único hijo de texto\n\n## Referencing another document\n\nexternal-doenetml-recursion-limit = No se pudo obtener el DoenetML externo por exceso de niveles de recursión. ¿Hay alguna referencia circular?\n\nexternal-doenetml-unavailable = No se pudo obtener el DoenetML de { $attribute }="{ $uri }"\n\nexternal-doenetml-type-mismatch = El DoenetML obtenido de { $attribute }="{ $uri }" no es válido: no coincide con el tipo de componente "{ $componentType }"\n\n## Deprecated syntax\n\n# `[deprecation]` is a literal marker opening all three messages and is left\n# as it stands. $component is `none` when the rename applies to every component\n# that accepts the attribute, where naming one would mislead.\n\ndeprecated-attribute-renamed =\n    { $component ->\n        [none] [deprecation] El atributo `{ $from }` está obsoleto; usa `{ $to }` en su lugar.\n       *[other] [deprecation] El atributo `{ $from }` de `<{ $component }>` está obsoleto; usa `{ $to }` en su lugar.\n    }\n\ndeprecated-attribute-renamed-conflict =\n    { $component ->\n        [none] [deprecation] El atributo `{ $from }` está obsoleto y se ignora porque también se especificó `{ $to }`.\n       *[other] [deprecation] El atributo `{ $from }` de `<{ $component }>` está obsoleto y se ignora porque también se especificó `{ $to }`.\n    }\n\ndeprecated-attribute-ignored = [deprecation] El atributo `{ $attribute }` de `<{ $component }>` está obsoleto y se ignora.\n\n\n## Language coverage\n\n# $locale is the document\'s language tag, exactly as it was declared.\npluralize-english-only = `<pluralize>` solo puede pluralizar en inglés, así que su texto queda sin cambios en un documento escrito en { $locale }. Escribe el plural directamente o indícalo con el atributo `pluralForm`.\n\n\n## Checking against the schema\n\n# $tag, $parent and $attribute reproduce what the author wrote and are left as\n# they stand; the `<`, `>` and the backticks around them are this catalog\'s own\n# punctuation, not part of the name.\n\nschema-element-unrecognized = El elemento `<{ $tag }>` no es un elemento de Doenet reconocido.\n\nschema-element-not-allowed-at-root = El elemento `<{ $tag }>` no se permite en la raíz del documento.\n\nschema-element-not-allowed-inside = El elemento `<{ $tag }>` no se permite dentro de `<{ $parent }>`.\n\nschema-attribute-unrecognized = El elemento `<{ $tag }>` no tiene ningún atributo llamado `{ $attribute }`.\n\n# $allowed is the accepted values, each already in double quotes and joined in\n# the reader\'s own language. $isList says whether the attribute accepts more\n# than one at a time.\nschema-attribute-value-not-allowed =\n    { $isList ->\n        [true] El atributo `{ $attribute }` del elemento `<{ $tag }>` debe ser una lista en la que cada elemento sea uno de: { $allowed }\n       *[other] El atributo `{ $attribute }` del elemento `<{ $tag }>` debe ser uno de: { $allowed }\n    }\n\n\n## The `<select>` family\'s error boxes\n##\n## Counts arrive as numbers, so a language that agrees a noun with them can\n## select on them. Component and attribute names — `selectFromSequence`,\n## `selectPrimeNumbers`, `from`, `to`, `step` — are DoenetML identifiers and are\n## left as they stand.\n\nselect-variant-name-option-count-mismatch = Nombre de variante no válido para select.  El nombre de variante { $variantName } aparece en { $numOptions } opciones, pero el número a seleccionar es { $numToSelect }.\n\nselect-variant-name-without-options = Se especifican variantes para select, pero no se especifica ninguna opción para el posible nombre de variante: { $variantName }.\n\nselect-variant-name-not-possible = El nombre de variante { $variantName } especificado para select no es un nombre de variante posible.\n\nselect-too-few-options = No se pueden seleccionar { $numToSelect } componentes de solo { $numOptions }.\n\nselect-from-sequence-too-few-values = No se pueden seleccionar { $numToSelect } valores de una secuencia de longitud { $length }.\n\nselect-from-sequence-indices-count-mismatch = El número de índices especificados para select debe coincidir con el número a seleccionar\n\nselect-from-sequence-indices-not-integers = Todos los índices especificados para select deben ser enteros\n\nselect-from-sequence-index-excluded = Se especificó un índice de selectfromsequence que estaba excluido\n\nselect-from-sequence-indices-excluded-combination = Se especificaron índices de selectfromsequence que formaban una combinación excluida\n\nselect-from-sequence-coprime-not-positive-integers = No se pueden seleccionar combinaciones coprimas porque no se están seleccionando enteros positivos.\n\nselect-from-sequence-coprime-common-factor = No se pueden seleccionar números coprimos. Todos los valores posibles comparten un factor común. (Los valores especificados de "from" o "to" deben ser coprimos con "step".)\n\nselect-from-sequence-coprime-single-number = No se pueden seleccionar combinaciones coprimas a partir de un único número que no sea 1.\n\nselect-from-sequence-excluded-too-many-combinations = Se excluyó más del 70 % de las combinaciones en selectFromSequence\n\nselect-from-sequence-coprime-none-found = No se pudieron seleccionar números coprimos. Todos los valores posibles comparten un factor común.\n\nselect-from-sequence-too-few-unique-values = No se pueden seleccionar { $numToSelect } valores únicos de una secuencia de longitud { $numPossibleValues }\n\nselect-prime-numbers-too-few-values = No se pueden seleccionar { $numToSelect } valores de una lista de primos de longitud { $numValues }\n\nselect-prime-numbers-values-count-mismatch = El número de valores especificados para select debe coincidir con el número a seleccionar\n\nselect-prime-numbers-values-not-prime = Todos los valores especificados para select prime number deben estar en la lista de primos\n\nselect-prime-numbers-values-excluded-combination = Se especificaron valores de selectPrimeNumbers que formaban una combinación excluida\n\nselect-prime-numbers-excluded-too-many-combinations = Se excluyó más del 70 % de las combinaciones en selectPrimeNumbers\n\nselect-random-combination-fluke = Por una casualidad extremadamente improbable, no se pudo seleccionar una combinación de valores aleatorios\n\nselect-random-value-fluke = Por una casualidad extremadamente improbable, no se pudo seleccionar un valor aleatorio\n';
+export {
+  diagnostics as default
+};
+//# sourceMappingURL=diagnostics-Ym7cNYqW-Ym7cNYqW.js.map

package/diagnostics-Ym7cNYqW-Ym7cNYqW.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"diagnostics-Ym7cNYqW-Ym7cNYqW.js","sources":["../../../i18n/dist/diagnostics-Ym7cNYqW.js"],"sourcesContent":["const diagnostics = '# Spanish diagnostics. Translated from `locales/en/diagnostics.ftl`, which is\\n# the source of truth: `lint:i18n` rejects a key that does not exist there, and\\n# reports a key that exists there but not here as missing coverage.\\n#\\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\\n# Correct anything here freely; nothing in it was written by a translator.\\n#\\n# Attribute names, element names and every other DoenetML identifier —\\n# `through`, `endpoint`, `midpointOffset`, `numDimensions`, `<answer>`,\\n# `selectFromSequence` — are part of the language, not prose, and stay in\\n# English exactly as written. So does anything quoted back from the author\\'s\\n# own source.\\n\\n## `<lineSegment>`\\n\\nline-segment-attributes-ignored-with-endpoints =\\n    { $attributesCount ->\\n        [one] { $attributes } se ignora cuando se especifican los dos extremos\\n       *[other] { $attributes } se ignoran cuando se especifican los dos extremos\\n    }\\n\\nline-segment-attributes-ignored-with-endpoint-and-midpoint =\\n    { $attributesCount ->\\n        [one] { $attributes } se ignora cuando se especifican un extremo y el punto medio\\n       *[other] { $attributes } se ignoran cuando se especifican un extremo y el punto medio\\n    }\\n\\nline-segment-midpoint-offset-without-midpoint = midpointOffset no tiene efecto sin un punto medio\\n\\n## `<line>`\\n\\n# «Recta», not «línea», even though `noun.line` in content.ftl says «línea»:\\n# not an inconsistency but the difference between describing the stroke that\\n# was drawn («una línea azul gruesa») and naming the geometric object, which in\\n# mathematics is a recta — hence «la ecuación de la recta».\\n\\nline-points-undetermined-dimensions = La recta pasa por puntos de dimensiones indeterminadas.\\n\\nline-points-too-few-dimensions = La recta debe pasar por puntos de al menos dos dimensiones.\\n\\nline-points-depend-on-variables = La recta pasa por puntos que dependen de las variables: { $variables }.\\n\\n# Enumerated with a comma rather than «y»: `<line>`\\'s variables default to `x`\\n# and `y`, and «en las variables x y y» would be both wrong — before an /i/\\n# sound the conjunction is «e» — and unreadable. A comma is correct whatever\\n# the variables are named, which is not known here in advance.\\nline-equation-invalid-format = Formato no válido para la ecuación de la recta en las variables { $variable1 }, { $variable2 }.\\n\\n## `<ray>`\\n\\nray-overprescribed-through = La semirrecta está determinada por through, endpoint y direction. Se ignora el through especificado.\\n\\nray-dimension-mismatch = Discrepancia de numDimensions en la semirrecta.\\n\\n## `<vector>`\\n\\nvector-overprescribed-head = El vector está determinado por head, tail y displacement. Se ignora el head especificado.\\n\\nvector-dimension-mismatch = Discrepancia de numDimensions en el vector.\\n\\n## Attracting and constraining\\n\\nattract-to-without-nearest-point = No se puede atraer a un `<{ $component }>` porque no tiene la variable de estado nearestPoint.\\n\\nconstrain-to-without-nearest-point = No se puede restringir a un `<{ $component }>` porque no tiene la variable de estado nearestPoint.\\n\\nconstrain-to-interior-without-nearest-point = No se puede restringir al interior de un `<{ $component }>` porque no tiene la variable de estado nearestPoint.\\n\\n## `<choiceInput>`\\n\\nchoice-input-label-position-ignored = labelPosition se ignora en un choiceInput que no es inline\\n\\n## Ordering children by index\\n\\nchoice-input-indices-count-mismatch = Se ignoran los índices especificados para choiceInput porque su cantidad no coincide con la cantidad de hijos choice.\\n\\npretzel-indices-count-mismatch = Se ignoran los índices especificados para problem porque su cantidad no coincide con la cantidad de hijos problem.\\n\\nshuffle-indices-count-mismatch = Se ignoran los índices especificados para shuffle porque su cantidad no coincide con la cantidad de componentes.\\n\\nindices-ignored-out-of-range = Se ignoran los índices especificados para { $component } porque algunos están fuera de rango.\\n\\npretzel-indices-repeated = Se ignoran los índices especificados para pretzel porque algunos están repetidos.\\n\\npretzel-circuit-first-index = Se ignoran los índices especificados para pretzel en modo circuit porque el primer índice debe ser 1.\\n\\n## `<shuffle>` and `<sort>`\\n\\nstring-children-need-type = Para que `<{ $component }>` funcione con hijos de texto, se debe especificar el atributo `type`.\\n\\ninvalid-type-defaulting-to-math = Tipo no válido { $type } para el componente { $component }. Debe ser math, text, number o boolean. Se usa math.\\n\\nstring-not-valid-component-to-arrange = La cadena \"{ $value }\" no es un componente válido para { $component }. Se ignora.\\n\\n## Types and variables\\n\\ninvalid-type-defaulting-to-number = Tipo no válido { $type }, se establece el tipo en number.\\n\\ninvalid-variable-value = Valor no válido de una variable: `{ $value }`\\n\\n## Variants\\n\\nvariant-index-must-be-number = El índice de variante { $index } debe ser un número\\n\\nvariant-index-must-be-integer = El índice de variante { $index } debe ser un número entero\\n\\n## `<sideBySide>`\\n\\nside-by-side-absolute-widths = `<{ $component }>` no está implementado para medidas absolutas. Los anchos se establecen como relativos.\\n\\nside-by-side-absolute-margins = `<{ $component }>` no está implementado para medidas absolutas. Los márgenes se establecen como relativos.\\n\\nside-by-side-no-block-child = `<{ $component }>` no es válido: debe tener al menos un hijo de bloque.\\n\\n## `<label>`\\n\\nlabel-for-ignored-on-graphical = Se ignora el atributo `for` en un `<label>` gráfico.\\n\\nlabel-for-must-resolve-to-one = El atributo `for` de `<label>` debe corresponder exactamente a un componente.\\n\\nlabel-for-unresolved = No se pudo resolver el atributo `for` de `<label>` a un componente.\\n\\nlabel-for-answer-with-authored-inputs = El atributo `for` de `<label>` hace referencia a un `<answer>` con entradas escritas explícitamente; haz referencia a la entrada directamente.\\n\\nlabel-for-answer-without-input = El atributo `for` de `<label>` hace referencia a un `<answer>` que no tiene ninguna entrada que etiquetar.\\n\\nlabel-for-must-reference-input-or-answer = El atributo `for` de `<label>` debe hacer referencia a una entrada o a un `<answer>`.\\n\\n## Accessibility\\n\\naccessibility-short-description-or-decorative = Por accesibilidad, `<{ $component }>` debe tener una descripción breve o estar marcado como decorativo.\\n\\naccessibility-video-short-description = Por accesibilidad, `<video>` debe tener una descripción breve.\\n\\naccessibility-input-short-description-or-label = Por accesibilidad, `<{ $component }>` debe tener una descripción breve o una etiqueta.\\n\\naccessibility-answer-input-short-description-or-label = Por accesibilidad, la entrada creada por un `<answer>` debe tener una descripción breve o una etiqueta.\\n\\naccessibility-short-description-contains-math = Las descripciones breves no deben contener componentes matemáticos como `<{ $component }>`. Expresa las matemáticas con palabras.\\n\\naccessibility-section-title-insufficient-contrast =\\n    { $mode ->\\n        [dark] { $colorName } no tiene suficiente contraste con el texto del encabezado de sección (modo oscuro) ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1).\\n       *[other] { $colorName } no tiene suficiente contraste con el texto del encabezado de sección ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1).\\n    }\\n\\n## `<circle>`\\n\\ncircle-through-points-non-numerical = No está implementado un `<circle>` que pase por { $count } puntos cuando los puntos no tienen valores numéricos.\\n\\ncircle-too-many-through-points = No se puede calcular una circunferencia que pase por más de 3 puntos.\\n\\ncircle-overprescribed-radius-center-points = No se puede calcular una circunferencia con radio, centro y puntos de paso especificados a la vez.\\n\\ncircle-center-with-multiple-points = No se puede calcular una circunferencia con centro especificado que pase por más de 1 punto.\\n\\ncircle-radius-too-small = No se puede calcular la circunferencia: dado que la distancia entre los dos puntos es { $distance }, el radio especificado { $radius } es demasiado pequeño.\\n\\ncircle-radius-with-many-points = No se puede crear una circunferencia que pase por más de dos puntos con un radio especificado.\\n\\ncircle-invalid-center-or-through-points = El centro o los puntos de paso de la circunferencia no son válidos.\\n\\ncircle-radius-center-with-multiple-points = No se puede calcular el radio de una circunferencia con centro especificado que pase por más de 1 punto.\\n\\ncircle-change-radius-non-numerical = No se puede cambiar el radio de una circunferencia con puntos de paso no numéricos\\n\\ncircle-radius-with-points-non-numerical = No se puede crear una circunferencia que pase por más de un punto con un radio especificado cuando no hay valores numéricos.\\n\\ncircle-change-center-non-numerical = No está implementado cambiar el centro de una circunferencia que pasa por puntos con valores no numéricos.\\n\\n## `<function>`\\n\\nfunction-domain-insufficient-dimensions =\\n    { $intervals ->\\n        [one] Dimensiones insuficientes para el dominio de la función. El dominio tiene { $intervals } intervalo pero la función tiene { $inputs ->\\n            [one] { $inputs } entrada\\n           *[other] { $inputs } entradas\\n        }.\\n       *[other] Dimensiones insuficientes para el dominio de la función. El dominio tiene { $intervals } intervalos pero la función tiene { $inputs ->\\n            [one] { $inputs } entrada\\n           *[other] { $inputs } entradas\\n        }.\\n    }\\n\\nfunction-domain-invalid-format = Formato no válido para el dominio de la función.\\n\\nfunction-ignoring-non-numerical =\\n    { $type ->\\n        [maximum] Se ignora el máximo no numérico de la función.\\n        [minimum] Se ignora el mínimo no numérico de la función.\\n        [extremum] Se ignora el extremo no numérico de la función.\\n        [point] Se ignora el punto no numérico de la función.\\n        [slope] Se ignora la pendiente no numérica de la función.\\n       *[other] Se ignora { $type } no numérico de la función.\\n    }\\n\\nfunction-ignoring-empty =\\n    { $type ->\\n        [maximum] Se ignora el máximo vacío de la función.\\n        [minimum] Se ignora el mínimo vacío de la función.\\n        [extremum] Se ignora el extremo vacío de la función.\\n        [point] Se ignora el punto vacío de la función.\\n       *[other] Se ignora { $type } vacío de la función.\\n    }\\n\\nfunction-points-too-close = La función contiene dos puntos demasiado próximos entre sí. No se puede definir la función.\\n\\nfunction-iterates-input-output-mismatch =\\n    { $inputs ->\\n        [one] Las iteraciones de una función solo son posibles si el número de entradas es igual al número de salidas. Esta función tiene { $inputs } entrada y { $outputs ->\\n            [one] { $outputs } salida\\n           *[other] { $outputs } salidas\\n        }.\\n       *[other] Las iteraciones de una función solo son posibles si el número de entradas es igual al número de salidas. Esta función tiene { $inputs } entradas y { $outputs ->\\n            [one] { $outputs } salida\\n           *[other] { $outputs } salidas\\n        }.\\n    }\\n\\n## `<sequence>`\\n\\nsequence-invalid-length = Longitud de la secuencia no válida. Debe ser un entero no negativo.\\n\\nsequence-invalid-step = Paso de la secuencia no válido. Debe ser un número para una secuencia de tipo { $type }.\\n\\nsequence-invalid-endpoint-number = El valor de \"{ $attribute }\" de la secuencia numérica no es válido. Debe ser un número.\\n\\nsequence-invalid-endpoint-letters = El valor de \"{ $attribute }\" de la secuencia de letras no es válido. Debe ser una combinación de letras.\\n\\nsequence-invalid-endpoint = El valor de \"{ $attribute }\" de la secuencia no es válido.\\n\\nselect-from-sequence-coprime-not-numbers = Se ignora coprime porque no se están seleccionando números\\n\\nselect-from-sequence-coprime-with-exclude-combinations = Se ignora coprime porque se especificó excludeCombinations\\n\\n## Resolving a `target`\\n\\ntarget-not-found = Destino no válido para `<{ $source }>`: no se encuentra el destino.\\n\\ntarget-state-variable-not-found = Destino no válido para `<{ $source }>`: no se encuentra una variable de estado llamada \"{ $property }\" en un `<{ $component }>`.\\n\\n## `<odeSystem>`\\n\\node-system-variables-match-independent = Las variables de `<odeSystem>` deben ser distintas de la variable independiente.\\n\\node-system-duplicate-variable-names = No se pueden definir las funciones del lado derecho de la EDO con nombres de variables dependientes repetidos.\\n\\node-system-rhs-function-error = No se puede definir la función del lado derecho de la EDO. Error al crear la función de mathjs.\\n\\n## `<angle>`, `<parabola>`, and `<intersection>`\\n\\nangle-too-many-lines = No se puede definir un ángulo entre { $count } rectas\\n\\nangle-invalid-through-point = Punto no válido en through de `<angle>`\\n\\nparabola-vertex-too-many-points = No está implementada una parábola con vértice que pase por más de 1 punto.\\n\\nparabola-too-many-points = No está implementada una parábola que pase por más de 3 puntos.\\n\\nintersection-too-many-items = No está implementada la intersección de más de dos objetos\\n\\n## Other math components\\n\\nionic-compound-not-two-ions = No está implementado el compuesto iónico para algo distinto de dos iones.\\n\\nionic-compound-needs-cation-and-anion = El compuesto iónico solo está implementado para un catión y un anión.\\n\\nsolve-equations-cannot-evaluate = No se puede resolver la ecuación porque no se pudo evaluar: { $equation }\\n\\nmath-operators-operand-number-required = Se debe especificar operandNumber al extraer un operando matemático.\\n\\neigen-decomposition-failed = No se pudieron calcular los valores propios de la matriz\\n\\n## `<matchesPattern>`\\n\\nmatches-pattern-parameter-not-in-pattern =\\n    { $parametersCount ->\\n        [one] `<matchesPattern>`: el parámetro { $parameters } no aparece en el patrón, por lo que siempre coincidirá con un espacio en blanco.\\n       *[other] `<matchesPattern>`: los parámetros { $parameters } no aparecen en el patrón, por lo que siempre coincidirán con un espacio en blanco.\\n    }\\n\\n## `<graph>`\\n\\ngraph-grid-invalid = `<graph>`: no se puede interpretar grid=\"{ $grid }\". Debe ser none, medium, dense o dos números positivos separados por un espacio, como grid=\"1 0.5\". No se dibuja ninguna cuadrícula.\\n\\n## PreFigure renderer\\n\\nprefigure-x-label-position-unsupported = `<graph>`: xLabelPosition=\"left\" no es compatible con el renderizador prefigure; se usa el comportamiento de posición derecha.\\n\\nprefigure-y-label-position-unsupported = `<graph>`: yLabelPosition=\"bottom\" no es compatible con el renderizador prefigure; se usa el comportamiento de posición superior.\\n\\nprefigure-invalid-axis-bounds = `<graph>`: los límites de los ejes no son válidos para la conversión a prefigure; se usa el bbox predeterminado (-10,-10,10,10).\\n\\nprefigure-invalid-width = `<graph>`: el ancho no es válido para la conversión a prefigure; se usa el ancho de diagrama predeterminado 425.\\n\\nprefigure-invalid-aspect-ratio = `<graph>`: aspectRatio no es válido para la conversión a prefigure; se usa la relación de aspecto predeterminada 1.\\n\\nprefigure-grid-spacing-too-fine = `<graph>`: el espaciado de la cuadrícula es demasiado fino para los límites de los ejes; se omite la cuadrícula en el renderizador prefigure.\\n\\nprefigure-annotations-not-rendered = `<graph>`: las anotaciones no se representan si no se usa el renderizador PreFigure.\\n\\nmultiple-annotations-children = Se encontraron varios hijos `<annotations>` en `<graph>`; se ignoran todos menos el último.\\n\\n## Referring to other components\\n\\ncopy-unrecognized-component-type = No se puede extender ni copiar un tipo de componente desconocido: { $type }.\\n\\ncopy-prop-not-found = No se encontró la propiedad { $property } en un componente de tipo { $component }\\n\\ncollect-no-source = No se encontró ninguna fuente para collect.\\n\\ncollect-invalid-component-type = No se pueden recolectar componentes de tipo `<{ $component }>` porque no es un tipo de componente válido.\\n\\nreference-index-unavailable = No se puede referenciar el índice `{ $reference }`\\n\\n## `<callAction>`\\n\\ncomponent-action-unavailable = No se puede llamar a { $action } en el componente `{ $reference }`\\n\\n## `<dataFrame>`\\n\\ndata-frame-inconsistent-row-lengths = Los datos tienen una forma no válida.  Las filas tienen longitudes distintas. Encontrado en componentIdx :{ $componentIdx }\\n\\ndata-frame-duplicate-column-names = Los datos tienen nombres de columna repetidos.  Encontrado en componentIdx :{ $componentIdx }\\n\\ndata-frame-missing-column-name = A los datos les falta el nombre de una columna.  Encontrado en componentIdx :{ $componentIdx }\\n\\n## `<answer>` and scoring\\n\\nanswer-award-depends-on-own-response = Un award de esta respuesta depende de la respuesta enviada por el propio answer, lo que provocará un comportamiento inesperado.\\n\\nanswer-max-num-attempts-in-section-wide-check-work = Establecer `maxNumAttempts` en un `<answer>` dentro de un contenedor con `sectionWideCheckWork` no tiene efecto, porque el número de intentos lo controla el contenedor. Establece `maxNumAttempts` en el contenedor.\\n\\nnested-section-wide-check-work-max-num-attempts = Establecer `maxNumAttempts` en un contenedor con `sectionWideCheckWork` que está dentro de otro contenedor con `sectionWideCheckWork` no tiene efecto, porque el número de intentos lo controla el contenedor exterior. Establece `maxNumAttempts` en el contenedor exterior.\\n\\nanswer-attributes-need-symbolic-equality =\\n    { $attributesCount ->\\n        [one] El atributo { $attributes } no tendrá efecto si no se establece symbolicEquality.\\n       *[other] Los atributos { $attributes } no tendrán efecto si no se establece symbolicEquality.\\n    }\\n\\nanswer-invalid-type = Tipo no válido para answer: { $type }\\n\\n## `<module>`, `<conditionalContent>`, `<slider>`, `<pretzel>`\\n\\nmodule-attribute-child-needs-name = Como el componente `<{ $component }>` no tiene nombre, no se puede usar como atributo de módulo\\n\\nmodule-attribute-name-already-defined = El componente `<{ $component } name=\"{ $name }\">` no se puede usar como atributo de un módulo porque el tipo de componente `<module>` ya tiene definido un atributo \"{ $name }\".\\n\\nconditional-content-condition-ignored = Se ignora el atributo `condition` en un `<conditionalContent>` que tiene hijos case o else.\\n\\nslider-markers-type-mismatch = El tipo de los marcadores no coincide con el tipo del slider.\\n\\npretzel-problem-needs-statement-and-answer = Pretzel no válido: cada `<problem>` debe contener un `<statement>` y un `<answer>`.\\n\\npretzel-circuit-first-problem-distractor = Pretzel no válido: en mode=\"circuit\", el primer `<problem>` no puede ser un distractor.\\n\\n## Attribute values\\n\\nattribute-invalid-values =\\n    { $valuesCount ->\\n        [one] Valor no válido { $values } para el atributo `{ $attribute }`; se ignora.\\n       *[other] Valores no válidos { $values } para el atributo `{ $attribute }`; se ignoran.\\n    }\\n\\nattribute-must-be-references = Valor no válido `{ $value }` para el atributo `{ $attribute }`. El atributo debe estar compuesto de referencias que empiecen por `$`.\\n\\nmath-input-invalid-function-names = <mathInput>: se ignoran nombres de función no válidos en { $attribute }: { $names }. El segmento visible de cada nombre debe tener al menos 2 caracteres (letras o guiones); puede añadirse un sufijo opcional `|<alternativa de mathspeak>`.\\n\\n## Building components from the source\\n\\ncomponent-type-invalid = Tipo de componente no válido: `<{ $componentType }>`\\n\\nattribute-repeated = No se puede repetir el atributo { $attribute }.\\n\\nattribute-invalid-for-component = Atributo \"{ $attribute }\" no válido para un componente de tipo `<{ $componentType }>`.\\n\\n## Style definition contrast\\n\\nstyle-definition-insufficient-contrast =\\n    La definición de estilo { $styleNumber } no tiene suficiente contraste para { $context ->\\n        [text-on-background] el color del texto sobre el color de fondo\\n        [high-contrast] el color de alto contraste sobre el lienzo\\n        [line] el color de las líneas sobre el lienzo\\n        [marker] el color de los marcadores sobre el lienzo\\n       *[text-on-canvas] el color del texto sobre el lienzo\\n    }{ $mode ->\\n        [dark] { \" (modo oscuro)\" }\\n       *[light] { \"\" }\\n    } ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1).\\n\\nstyle-definition-dark-mode-text-background-contrast =\\n    Aunque la definición de estilo { $styleNumber } especifica colores con suficiente contraste en modo claro, los colores de modo oscuro derivados de esos valores no tienen suficiente contraste entre el color del texto y el color de fondo ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1). { $suggestion ->\\n        [available] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro (por ejemplo, con { $lightAttribute }=\"{ $lightColor }\") o define el color de modo oscuro (por ejemplo, con { $darkAttribute }=\"{ $darkColor }\").\\n       *[none] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro o sustituye los colores derivados mediante textColorDarkMode o backgroundColorDarkMode.\\n    }\\n\\nstyle-definition-dark-mode-text-canvas-contrast =\\n    Aunque la definición de estilo { $styleNumber } especifica un color de texto con suficiente contraste en modo claro, el color de texto de modo oscuro derivado de ese valor no tiene suficiente contraste sobre el lienzo ({ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1; se requiere al menos { $threshold }:1). { $suggestion ->\\n        [available] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro (por ejemplo, con textColor=\"{ $lightColor }\") o define el color de modo oscuro (por ejemplo, con textColorDarkMode=\"{ $darkColor }\").\\n       *[none] Para lograr suficiente contraste en modo oscuro, aumenta el contraste en modo claro o sustituye el color derivado mediante textColorDarkMode.\\n    }\\n\\nsection-multiple-style-palettes = Una sección solo puede seleccionar un <stylePalette>; se usará el último.\\n\\n## Unique variants\\n\\nvariant-num-to-select-not-non-negative-integer = no se pueden determinar las variantes únicas de { $component } porque numToSelect no es un entero no negativo.\\n\\nvariant-num-to-select-not-constant-number = no se pueden determinar las variantes únicas de { $component } porque numToSelect no es un número constante.\\n\\nvariant-with-replacement-not-constant-boolean = no se pueden determinar las variantes únicas de { $component } porque withReplacement no es un booleano constante.\\n\\nvariant-select-weight-disables-unique = Las variantes únicas quedan desactivadas en select si alguna opción especifica selectWeight o selectForVariants\\n\\nvariant-coprime-undetermined = no se pueden determinar las variantes únicas de { $component } porque no se puede determinar si coprime es siempre falso.\\n\\nvariant-attribute-not-constant = no se pueden determinar las variantes únicas de { $component } porque { $attribute } no es constante.\\n\\nvariant-attribute-not-number = no se pueden determinar las variantes únicas de { $component } porque { $attribute } no es un número.\\n\\nvariant-attribute-wrong-type-for-sequence =\\n    no se pueden determinar las variantes únicas de { $component } de tipo { $type } porque { $attribute } no es { $expected ->\\n        [letters-combination] una combinación de letras\\n        [math-expression] una expresión matemática válida\\n        [integer] un entero\\n       *[number] un número\\n    }.\\n\\nvariant-length-not-integer = no se pueden determinar las variantes únicas de { $component } porque length no es un entero.\\n\\nvariant-sort-not-implemented = no se han implementado las variantes únicas de un { $component } con sort\\n\\nvariant-exclude-combinations-not-implemented = no se han implementado las variantes únicas de un { $component } con excludeCombinations\\n\\nvariant-math-exclude-not-implemented = no se han implementado las variantes únicas de un { $component } de tipo math con exclude\\n\\nvariant-non-constant-exclude-not-implemented = no se han implementado las variantes únicas de un { $component } con exclude no constante\\n\\n## PreFigure conversion\\n\\nprefigure-descendant-unsupported = { $subject }: no se admite en el renderizador prefigure de gráficos; se omite el descendiente.\\n\\nprefigure-descendant-invalid-geometry = { $subject }: geometría no finita o incompleta; se omite el descendiente.\\n\\nprefigure-curve-label-omitted = { $subject }: las etiquetas no se admiten en los elementos de curva convertidos; se omite la etiqueta.\\n\\nprefigure-curve-unsupported-definition-type = { $subject }: tipo de definición de función de curva no admitido \\'{ $definitionType }\\'; se omite el descendiente.\\n\\nprefigure-region-flip-functions-unsupported = { $subject }: atributo flipFunctions no admitido en regionBetweenCurves; se omite el descendiente.\\n\\nprefigure-region-non-formula-child = { $subject }: en regionBetweenCurves solo se admiten funciones hijas de tipo fórmula; se omite el descendiente.\\n\\nprefigure-label-position-unsupported =\\n    { $subject }: labelPosition \\'{ $labelPosition }\\' no admitido para { $labelKind ->\\n        [line-family] una etiqueta de la familia de líneas\\n       *[point] una etiqueta de punto\\n    }; se usa la alineación predeterminada de PreFigure.\\n\\nprefigure-fill-style-unsupported = { $subject }: PreFigure no admite el estilo de relleno \\'{ $fillStyle }\\'; se usa un relleno sólido.\\n\\nprefigure-line-style-unknown = { $subject }: estilo de línea desconocido \\'{ $lineStyle }\\'; se omite de la salida de PreFigure.\\n\\nprefigure-marker-style-mapped-to-diamond = { $subject }: el estilo de marcador \\'{ $markerStyle }\\' se asigna al estilo \\'diamond\\' de PreFigure.\\n\\nprefigure-marker-style-unsupported = { $subject }: PreFigure no admite el estilo de marcador \\'{ $markerStyle }\\'; se usa el estilo predeterminado.\\n\\n## PreFigure annotations\\n\\nannotation-ref-unresolvable = `<annotation>`: `ref` no válido; no se puede resolver el destino. Se omite la anotación.\\n\\nannotation-ref-multiple-targets = `<annotation>`: `ref` se resolvió a varios destinos; se usa el primero.\\n\\nannotation-ref-outside-graph = `<annotation>`: `ref` no válido; el destino está fuera del gráfico que lo contiene. Se omite la anotación.\\n\\nannotation-ref-unsupported-target = `<annotation>`: `ref` no válido; el destino no es un objeto gráfico admitido en la conversión a prefigure. Se omite la anotación.\\n\\nannotation-text-missing = `<annotation>`: falta `text` o está vacío; se emite texto vacío.\\n\\n## Composites and references\\n\\ncomposite-circular-dependency =\\n    { $componentType ->\\n        [none] Se detectó una dependencia circular.\\n       *[other] Se detectó una dependencia circular en la que participa un componente `<{ $componentType }>`.\\n    }\\n\\nreference-no-referent = No se encontró ningún referente para la referencia: `{ $reference }`\\n\\nreference-multiple-referents = Se encontraron varios referentes para la referencia: `{ $reference }`\\n\\n## Children that do not match\\n\\nchildren-invalid-attribute-format = Formato no válido para el atributo { $attribute } de `<{ $componentType }>`.\\n\\nchildren-invalid = Hijos no válidos para `<{ $componentType }>`: se encontraron hijos no válidos: { $children }\\n\\n## Falling back to a default\\n\\nattribute-value-invalid-using-default = Valor no válido `{ $value }` para el atributo `{ $attribute }`; se usa el valor `{ $default }`\\n\\n## Loading a DoenetML version\\n\\ndoenetml-version-not-found =\\n    { $fallback ->\\n        [none] No se encontró la versión { $version } de DoenetML.\\n       *[other] No se encontró la versión { $version } de DoenetML. Se recurrirá a la versión { $fallback }\\n    }\\n\\n## Reading the DoenetML\\n\\n# These messages quote the author\\'s own text — `$tag`, `$value`, `$attribute`\\n# — which is reproduced exactly as written.\\n\\nparse-invalid-doenetml = DoenetML no válido: { $content }\\n\\nparse-tag-missing-close-tag = DoenetML no válido: la etiqueta `{ $tag }` no tiene etiqueta de cierre. Se esperaba una etiqueta autocerrada o una etiqueta `</{ $tagName }>`.\\n\\nparse-tag-error = DoenetML no válido: error en la etiqueta `<{ $tagName }>`\\n\\nparse-attribute-missing-value = DoenetML no válido: parece que al atributo `{ $attribute }` le falta un valor.\\n\\nparse-attribute-invalid = DoenetML no válido: atributo no válido `{ $attribute }`\\n\\nparse-attribute-value-invalid = DoenetML no válido: valor de atributo no válido `{ $value }`\\n\\n# $quote is the quotation mark that would close the pair: `\"` or `\\'`.\\nparse-attribute-value-quote-mismatch = DoenetML no válido: valor de atributo no válido `{ $value }`. Las comillas no coinciden. Parece que falta una `{ $quote }`\\n\\nparse-open-tag-name-missing = DoenetML no válido: se encontró una etiqueta sin nombre, por ejemplo `<`\\n\\nparse-tag-not-closed = DoenetML no válido: la etiqueta `{ $tag }` no se cerró (parece que falta un `>`).\\n\\nparse-self-closing-tag-name-missing = DoenetML no válido: se encontró una etiqueta sin nombre `<{ $content }>`\\n\\nparse-self-closing-tag-not-closed = DoenetML no válido: la etiqueta `{ $tag }` no se cerró (parece que falta `/>`).\\n\\nparse-tag-invalid-attributes = DoenetML no válido: la etiqueta `{ $tag }` no es válida. Puede que tenga atributos incorrectos.\\n\\nparse-close-tag-name-missing = DoenetML no válido: se encontró una etiqueta de cierre sin nombre, por ejemplo `</`\\n\\nparse-attribute-value-unquoted = Los valores de los atributos deben ir entre comillas: `{ $attribute }=\"{ $value }\"`\\n\\nparse-close-tag-without-open-tag = DoenetML no válido: se encontró la etiqueta de cierre `{ $tag }`, pero no hay ninguna etiqueta de apertura que le corresponda\\n\\nparse-close-tag-mismatched = DoenetML no válido: la etiqueta de cierre no coincide. Se esperaba `</{ $expected }>`. Se encontró `{ $found }`\\n\\nparser-node-unconvertible = No se pudo convertir el nodo { $node } en un nodo Dast.\\n\\n## Names\\n\\nname-attribute-invalid =\\n    Atributo name=\\'{ $name }\\' no válido. { $reason ->\\n        [characters] Los nombres solo pueden contener letras, números, guiones bajos o guiones.\\n       *[start] Los nombres deben empezar por una letra.\\n    }\\n\\ncomponent-name-invalid-start = Nombre de componente \"{ $name }\" no válido. Los nombres deben empezar por una letra.\\n\\n## `<answer>` sugar\\n\\nanswer-video-watched-missing-video = Un `<answer>` de tipo videoWatched debe tener un atributo video\\n\\nanswer-video-watched-video-not-reference = Un `<answer>` de tipo videoWatched debe tener un atributo video que sea una referencia\\n\\nanswer-name-not-single-text = El atributo name de `<answer>` debe tener un único hijo de texto\\n\\n## Referencing another document\\n\\nexternal-doenetml-recursion-limit = No se pudo obtener el DoenetML externo por exceso de niveles de recursión. ¿Hay alguna referencia circular?\\n\\nexternal-doenetml-unavailable = No se pudo obtener el DoenetML de { $attribute }=\"{ $uri }\"\\n\\nexternal-doenetml-type-mismatch = El DoenetML obtenido de { $attribute }=\"{ $uri }\" no es válido: no coincide con el tipo de componente \"{ $componentType }\"\\n\\n## Deprecated syntax\\n\\n# `[deprecation]` is a literal marker opening all three messages and is left\\n# as it stands. $component is `none` when the rename applies to every component\\n# that accepts the attribute, where naming one would mislead.\\n\\ndeprecated-attribute-renamed =\\n    { $component ->\\n        [none] [deprecation] El atributo `{ $from }` está obsoleto; usa `{ $to }` en su lugar.\\n       *[other] [deprecation] El atributo `{ $from }` de `<{ $component }>` está obsoleto; usa `{ $to }` en su lugar.\\n    }\\n\\ndeprecated-attribute-renamed-conflict =\\n    { $component ->\\n        [none] [deprecation] El atributo `{ $from }` está obsoleto y se ignora porque también se especificó `{ $to }`.\\n       *[other] [deprecation] El atributo `{ $from }` de `<{ $component }>` está obsoleto y se ignora porque también se especificó `{ $to }`.\\n    }\\n\\ndeprecated-attribute-ignored = [deprecation] El atributo `{ $attribute }` de `<{ $component }>` está obsoleto y se ignora.\\n\\n\\n## Language coverage\\n\\n# $locale is the document\\'s language tag, exactly as it was declared.\\npluralize-english-only = `<pluralize>` solo puede pluralizar en inglés, así que su texto queda sin cambios en un documento escrito en { $locale }. Escribe el plural directamente o indícalo con el atributo `pluralForm`.\\n\\n\\n## Checking against the schema\\n\\n# $tag, $parent and $attribute reproduce what the author wrote and are left as\\n# they stand; the `<`, `>` and the backticks around them are this catalog\\'s own\\n# punctuation, not part of the name.\\n\\nschema-element-unrecognized = El elemento `<{ $tag }>` no es un elemento de Doenet reconocido.\\n\\nschema-element-not-allowed-at-root = El elemento `<{ $tag }>` no se permite en la raíz del documento.\\n\\nschema-element-not-allowed-inside = El elemento `<{ $tag }>` no se permite dentro de `<{ $parent }>`.\\n\\nschema-attribute-unrecognized = El elemento `<{ $tag }>` no tiene ningún atributo llamado `{ $attribute }`.\\n\\n# $allowed is the accepted values, each already in double quotes and joined in\\n# the reader\\'s own language. $isList says whether the attribute accepts more\\n# than one at a time.\\nschema-attribute-value-not-allowed =\\n    { $isList ->\\n        [true] El atributo `{ $attribute }` del elemento `<{ $tag }>` debe ser una lista en la que cada elemento sea uno de: { $allowed }\\n       *[other] El atributo `{ $attribute }` del elemento `<{ $tag }>` debe ser uno de: { $allowed }\\n    }\\n\\n\\n## The `<select>` family\\'s error boxes\\n##\\n## Counts arrive as numbers, so a language that agrees a noun with them can\\n## select on them. Component and attribute names — `selectFromSequence`,\\n## `selectPrimeNumbers`, `from`, `to`, `step` — are DoenetML identifiers and are\\n## left as they stand.\\n\\nselect-variant-name-option-count-mismatch = Nombre de variante no válido para select.  El nombre de variante { $variantName } aparece en { $numOptions } opciones, pero el número a seleccionar es { $numToSelect }.\\n\\nselect-variant-name-without-options = Se especifican variantes para select, pero no se especifica ninguna opción para el posible nombre de variante: { $variantName }.\\n\\nselect-variant-name-not-possible = El nombre de variante { $variantName } especificado para select no es un nombre de variante posible.\\n\\nselect-too-few-options = No se pueden seleccionar { $numToSelect } componentes de solo { $numOptions }.\\n\\nselect-from-sequence-too-few-values = No se pueden seleccionar { $numToSelect } valores de una secuencia de longitud { $length }.\\n\\nselect-from-sequence-indices-count-mismatch = El número de índices especificados para select debe coincidir con el número a seleccionar\\n\\nselect-from-sequence-indices-not-integers = Todos los índices especificados para select deben ser enteros\\n\\nselect-from-sequence-index-excluded = Se especificó un índice de selectfromsequence que estaba excluido\\n\\nselect-from-sequence-indices-excluded-combination = Se especificaron índices de selectfromsequence que formaban una combinación excluida\\n\\nselect-from-sequence-coprime-not-positive-integers = No se pueden seleccionar combinaciones coprimas porque no se están seleccionando enteros positivos.\\n\\nselect-from-sequence-coprime-common-factor = No se pueden seleccionar números coprimos. Todos los valores posibles comparten un factor común. (Los valores especificados de \"from\" o \"to\" deben ser coprimos con \"step\".)\\n\\nselect-from-sequence-coprime-single-number = No se pueden seleccionar combinaciones coprimas a partir de un único número que no sea 1.\\n\\nselect-from-sequence-excluded-too-many-combinations = Se excluyó más del 70 % de las combinaciones en selectFromSequence\\n\\nselect-from-sequence-coprime-none-found = No se pudieron seleccionar números coprimos. Todos los valores posibles comparten un factor común.\\n\\nselect-from-sequence-too-few-unique-values = No se pueden seleccionar { $numToSelect } valores únicos de una secuencia de longitud { $numPossibleValues }\\n\\nselect-prime-numbers-too-few-values = No se pueden seleccionar { $numToSelect } valores de una lista de primos de longitud { $numValues }\\n\\nselect-prime-numbers-values-count-mismatch = El número de valores especificados para select debe coincidir con el número a seleccionar\\n\\nselect-prime-numbers-values-not-prime = Todos los valores especificados para select prime number deben estar en la lista de primos\\n\\nselect-prime-numbers-values-excluded-combination = Se especificaron valores de selectPrimeNumbers que formaban una combinación excluida\\n\\nselect-prime-numbers-excluded-too-many-combinations = Se excluyó más del 70 % de las combinaciones en selectPrimeNumbers\\n\\nselect-random-combination-fluke = Por una casualidad extremadamente improbable, no se pudo seleccionar una combinación de valores aleatorios\\n\\nselect-random-value-fluke = Por una casualidad extremadamente improbable, no se pudo seleccionar un valor aleatorio\\n';\nexport {\n  diagnostics as default\n};\n//# sourceMappingURL=diagnostics-Ym7cNYqW.js.map\n"],"names":[],"mappings":"AAAK,MAAC,cAAc;"}

package/diagnostics-Z-Cb-y6t-Z-Cb-y6t.js

@@ -0,0 +1,5 @@
+const diagnostics = '# Simplified Chinese diagnostics. Translated from `locales/en/diagnostics.ftl`,\n# which is the source of truth: `lint:i18n` rejects a key that does not exist\n# there, and reports a key that exists there but not here as missing coverage.\n#\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\n# Correct anything here freely; nothing in it was written by a translator.\n#\n# Attribute names, element names and every other DoenetML identifier —\n# `through`, `endpoint`, `midpointOffset`, `numDimensions`, `<answer>`,\n# `selectFromSequence` — are part of the language, not prose, and stay in\n# English exactly as written. So does anything quoted back from the author\'s\n# own source.\n#\n# Chinese has a single plural category, so a countable message needs no\n# selection.\n\n## `<lineSegment>`\n\nline-segment-attributes-ignored-with-endpoints = 指定两个端点时，{ $attributes } 会被忽略\n\nline-segment-attributes-ignored-with-endpoint-and-midpoint = 同时指定端点和中点时，{ $attributes } 会被忽略\n\nline-segment-midpoint-offset-without-midpoint = 没有中点时 midpointOffset 不起作用\n\n## `<line>`\n\nline-points-undetermined-dimensions = 直线经过的点维数不确定。\n\nline-points-too-few-dimensions = 直线必须经过至少二维的点。\n\nline-points-depend-on-variables = 直线经过的点依赖于变量：{ $variables }。\n\nline-equation-invalid-format = 以变量 { $variable1 } 和 { $variable2 } 表示的直线方程格式无效。\n\n## `<ray>`\n\nray-overprescribed-through = 射线同时由 through、endpoint 和 direction 确定。忽略所指定的 through。\n\nray-dimension-mismatch = 射线中的 numDimensions 不一致。\n\n## `<vector>`\n\nvector-overprescribed-head = 向量同时由 head、tail 和 displacement 确定。忽略所指定的 head。\n\nvector-dimension-mismatch = 向量中的 numDimensions 不一致。\n\n## Attracting and constraining\n\nattract-to-without-nearest-point = 无法吸附到 `<{ $component }>`，因为它没有 nearestPoint 状态变量。\n\nconstrain-to-without-nearest-point = 无法约束到 `<{ $component }>`，因为它没有 nearestPoint 状态变量。\n\nconstrain-to-interior-without-nearest-point = 无法约束到 `<{ $component }>` 的内部，因为它没有 nearestPoint 状态变量。\n\n## `<choiceInput>`\n\nchoice-input-label-position-ignored = 对于非内联的 choiceInput，labelPosition 会被忽略\n\n## Ordering children by index\n\nchoice-input-indices-count-mismatch = 忽略为 choiceInput 指定的 indices，因为其数量与 choice 子元素的数量不符。\n\npretzel-indices-count-mismatch = 忽略为 problem 指定的 indices，因为其数量与 problem 子元素的数量不符。\n\nshuffle-indices-count-mismatch = 忽略为 shuffle 指定的 indices，因为其数量与组件数量不符。\n\nindices-ignored-out-of-range = 忽略为 { $component } 指定的 indices，因为有些超出范围。\n\npretzel-indices-repeated = 忽略为 pretzel 指定的 indices，因为有些重复。\n\npretzel-circuit-first-index = 忽略在 circuit 模式下为 pretzel 指定的 indices，因为第一个索引必须是 1。\n\n## `<shuffle>` and `<sort>`\n\nstring-children-need-type = 要让 `<{ $component }>` 支持字符串子元素，必须指定 `type` 属性。\n\ninvalid-type-defaulting-to-math = 组件 { $component } 的类型 { $type } 无效。它必须是 math、text、number 或 boolean 之一。改用 math。\n\nstring-not-valid-component-to-arrange = 字符串“{ $value }”不是 { $component } 的有效组件。已忽略。\n\n## Types and variables\n\ninvalid-type-defaulting-to-number = 类型 { $type } 无效，类型改设为 number。\n\ninvalid-variable-value = 变量的值无效：`{ $value }`\n\n## Variants\n\nvariant-index-must-be-number = 变体索引 { $index } 必须是数字\n\nvariant-index-must-be-integer = 变体索引 { $index } 必须是整数\n\n## `<sideBySide>`\n\nside-by-side-absolute-widths = `<{ $component }>` 未实现绝对尺寸。宽度改为相对值。\n\nside-by-side-absolute-margins = `<{ $component }>` 未实现绝对尺寸。边距改为相对值。\n\nside-by-side-no-block-child = 无效的 `<{ $component }>`：它必须至少有一个块级子元素。\n\n## `<label>`\n\nlabel-for-ignored-on-graphical = 图形 `<label>` 上的 `for` 属性会被忽略。\n\nlabel-for-must-resolve-to-one = `<label>` 上的 `for` 属性必须恰好解析为一个组件。\n\nlabel-for-unresolved = `<label>` 上的 `for` 属性无法解析为组件。\n\nlabel-for-answer-with-authored-inputs = `<label>` 上的 `for` 属性引用了一个显式书写了输入的 `<answer>`；请直接引用该输入。\n\nlabel-for-answer-without-input = `<label>` 上的 `for` 属性引用了一个没有可标注输入的 `<answer>`。\n\nlabel-for-must-reference-input-or-answer = `<label>` 上的 `for` 属性必须引用一个输入或一个答案。\n\n## Accessibility\n\naccessibility-short-description-or-decorative = 为了无障碍，`<{ $component }>` 必须有简短描述，或被标为装饰性元素。\n\naccessibility-video-short-description = 为了无障碍，`<video>` 必须有简短描述。\n\naccessibility-input-short-description-or-label = 为了无障碍，`<{ $component }>` 必须有简短描述或标签。\n\naccessibility-answer-input-short-description-or-label = 为了无障碍，创建输入的 `<answer>` 必须有简短描述或标签。\n\naccessibility-short-description-contains-math = 简短描述中不应包含 `<{ $component }>` 这类数学组件。请用文字把数学内容写出来。\n\naccessibility-section-title-insufficient-contrast =\n    { $mode ->\n        [dark] { $colorName } 对小节标题文字的对比度不足（深色模式）（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。\n       *[other] { $colorName } 对小节标题文字的对比度不足（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。\n    }\n\n## `<circle>`\n\ncircle-through-points-non-numerical = 当各点没有数值时，尚未实现经过 { $count } 个点的 `<circle>`。\n\ncircle-too-many-through-points = 无法计算经过 3 个以上点的圆。\n\ncircle-overprescribed-radius-center-points = 无法计算同时指定了半径、圆心和经过点的圆。\n\ncircle-center-with-multiple-points = 无法计算指定圆心且经过 1 个以上点的圆。\n\ncircle-radius-too-small = 无法计算该圆：两点间距离为 { $distance }，所指定的半径 { $radius } 太小。\n\ncircle-radius-with-many-points = 无法在指定半径的情况下创建经过两个以上点的圆。\n\ncircle-invalid-center-or-through-points = 圆的圆心或经过点无效。\n\ncircle-radius-center-with-multiple-points = 无法计算指定圆心且经过 1 个以上点的圆的半径。\n\ncircle-change-radius-non-numerical = 无法更改经过点非数值的圆的半径\n\ncircle-radius-with-points-non-numerical = 在没有数值的情况下，无法在指定半径时创建经过一个以上点的圆。\n\ncircle-change-center-non-numerical = 尚未实现更改经过非数值点的圆的圆心。\n\n## `<function>`\n\nfunction-domain-insufficient-dimensions = 函数定义域的维数不足。定义域有 { $intervals } 个区间，而该函数有 { $inputs } 个输入。\n\nfunction-domain-invalid-format = 函数定义域的格式无效。\n\nfunction-ignoring-non-numerical =\n    { $type ->\n        [maximum] 忽略函数的非数值最大值。\n        [minimum] 忽略函数的非数值最小值。\n        [extremum] 忽略函数的非数值极值。\n        [point] 忽略函数的非数值点。\n        [slope] 忽略函数的非数值斜率。\n       *[other] 忽略函数的非数值 { $type }。\n    }\n\nfunction-ignoring-empty =\n    { $type ->\n        [maximum] 忽略函数的空最大值。\n        [minimum] 忽略函数的空最小值。\n        [extremum] 忽略函数的空极值。\n        [point] 忽略函数的空点。\n       *[other] 忽略函数的空 { $type }。\n    }\n\nfunction-points-too-close = 函数中有两个点位置过于接近，无法定义该函数。\n\nfunction-iterates-input-output-mismatch = 只有输入个数等于输出个数时才能进行函数迭代。该函数有 { $inputs } 个输入和 { $outputs } 个输出。\n\n## `<sequence>`\n\nsequence-invalid-length = 数列长度无效。它必须是非负整数。\n\nsequence-invalid-step = 数列步长无效。对于类型为 { $type } 的数列，它必须是数字。\n\nsequence-invalid-endpoint-number = 数字数列的“{ $attribute }”无效。它必须是数字。\n\nsequence-invalid-endpoint-letters = 字母数列的“{ $attribute }”无效。它必须是字母组合。\n\nsequence-invalid-endpoint = 数列的“{ $attribute }”无效。\n\nselect-from-sequence-coprime-not-numbers = 忽略 coprime，因为所选的不是数字\n\nselect-from-sequence-coprime-with-exclude-combinations = 忽略 coprime，因为已指定 excludeCombinations\n\n## Resolving a `target`\n\ntarget-not-found = `<{ $source }>` 的 target 无效：找不到目标。\n\ntarget-state-variable-not-found = `<{ $source }>` 的 target 无效：在 `<{ $component }>` 上找不到名为“{ $property }”的状态变量。\n\n## `<odeSystem>`\n\node-system-variables-match-independent = `<odeSystem>` 的变量必须不同于自变量。\n\node-system-duplicate-variable-names = 无法用重复的因变量名定义 ODE 右端函数。\n\node-system-rhs-function-error = 无法定义 ODE 右端函数。创建 mathjs 函数时出错。\n\n## `<angle>`, `<parabola>`, and `<intersection>`\n\nangle-too-many-lines = 无法定义 { $count } 条直线之间的角\n\nangle-invalid-through-point = `<angle>` 的 through 中有无效的点\n\nparabola-vertex-too-many-points = 尚未实现指定顶点且经过 1 个以上点的抛物线。\n\nparabola-too-many-points = 尚未实现经过 3 个以上点的抛物线。\n\nintersection-too-many-items = 尚未实现两个以上对象的交集\n\n## Other math components\n\nionic-compound-not-two-ions = 尚未实现两个离子以外的离子化合物。\n\nionic-compound-needs-cation-and-anion = 离子化合物仅实现了一个阳离子和一个阴离子的情形。\n\nsolve-equations-cannot-evaluate = 无法求解方程，因为无法对其求值：{ $equation }\n\nmath-operators-operand-number-required = 提取数学运算对象时必须指定 operandNumber。\n\neigen-decomposition-failed = 无法计算矩阵的特征值\n\n## `<matchesPattern>`\n\nmatches-pattern-parameter-not-in-pattern = `<matchesPattern>`：参数 { $parameters } 未出现在模式中，因此总是会匹配空白。\n\n## `<graph>`\n\ngraph-grid-invalid = `<graph>`：无法解析 grid="{ $grid }"。它必须是 none、medium、dense，或以空格分隔的两个正数，例如 grid="1 0.5"。不绘制网格。\n\n## PreFigure renderer\n\nprefigure-x-label-position-unsupported = `<graph>`：prefigure 渲染器不支持 xLabelPosition="left"；改用右侧位置的行为。\n\nprefigure-y-label-position-unsupported = `<graph>`：prefigure 渲染器不支持 yLabelPosition="bottom"；改用顶部位置的行为。\n\nprefigure-invalid-axis-bounds = `<graph>`：prefigure 转换的坐标轴范围无效；改用默认 bbox (-10,-10,10,10)。\n\nprefigure-invalid-width = `<graph>`：prefigure 转换的宽度无效；改用默认图形宽度 425。\n\nprefigure-invalid-aspect-ratio = `<graph>`：prefigure 转换的 aspectRatio 无效；改用默认宽高比 1。\n\nprefigure-grid-spacing-too-fine = `<graph>`：相对于坐标轴范围，网格间距过密；prefigure 渲染器中省略网格。\n\nprefigure-annotations-not-rendered = `<graph>`：不使用 PreFigure 渲染器时不会绘制批注。\n\nmultiple-annotations-children = 在 `<graph>` 中发现多个 `<annotations>` 子元素；除最后一个外全部忽略。\n\n## Referring to other components\n\ncopy-unrecognized-component-type = 无法扩展或复制无法识别的组件类型：{ $type }。\n\ncopy-prop-not-found = 在类型为 { $component } 的组件上找不到属性 { $property }\n\ncollect-no-source = 未找到 collect 的来源。\n\ncollect-invalid-component-type = 无法收集类型为 `<{ $component }>` 的组件，因为这不是有效的组件类型。\n\nreference-index-unavailable = 无法引用索引 `{ $reference }`\n\n## `<callAction>`\n\ncomponent-action-unavailable = 无法在组件 `{ $reference }` 上调用 { $action }\n\n## `<dataFrame>`\n\ndata-frame-inconsistent-row-lengths = 数据形状无效。各行长度不一致。发现于 componentIdx :{ $componentIdx }\n\ndata-frame-duplicate-column-names = 数据中有重复的列名。发现于 componentIdx :{ $componentIdx }\n\ndata-frame-missing-column-name = 数据缺少列名。发现于 componentIdx :{ $componentIdx }\n\n## `<answer>` and scoring\n\nanswer-award-depends-on-own-response = 该答案的某个 award 依赖于 answer 标签自身提交的回答，这会导致意外行为。\n\nanswer-max-num-attempts-in-section-wide-check-work = 在带 `sectionWideCheckWork` 的容器内的 `<answer>` 上设置 `maxNumAttempts` 不起作用，因为尝试次数由容器控制。请改在容器上设置 `maxNumAttempts`。\n\nnested-section-wide-check-work-max-num-attempts = 在位于另一个带 `sectionWideCheckWork` 的容器内、且自身也带 `sectionWideCheckWork` 的容器上设置 `maxNumAttempts` 不起作用，因为尝试次数由外层容器控制。请在外层容器上设置 `maxNumAttempts`。\n\nanswer-attributes-need-symbolic-equality = 未设置 symbolicEquality 时，{ $attributes } 属性不会起作用。\n\nanswer-invalid-type = answer 的类型无效：{ $type }\n\n## `<module>`, `<conditionalContent>`, `<slider>`, `<pretzel>`\n\nmodule-attribute-child-needs-name = 由于组件 `<{ $component }>` 没有名称，它不能用作模块属性\n\nmodule-attribute-name-already-defined = 组件 `<{ $component } name="{ $name }">` 不能用作模块的属性，因为组件类型 `<module>` 已经定义了名为“{ $name }”的属性。\n\nconditional-content-condition-ignored = 在带有 case 或 else 子元素的 `<conditionalContent>` 组件上，`condition` 属性会被忽略。\n\nslider-markers-type-mismatch = 标记的类型与滑块的类型不匹配。\n\npretzel-problem-needs-statement-and-answer = 无效的 pretzel：每个 `<problem>` 必须包含一个 `<statement>` 和一个 `<answer>`。\n\npretzel-circuit-first-problem-distractor = 无效的 pretzel：在 mode="circuit" 下，第一个 `<problem>` 不能是干扰项。\n\n## Attribute values\n\nattribute-invalid-values = 属性 `{ $attribute }` 的值 { $values } 无效；已忽略。\n\nattribute-must-be-references = 属性 `{ $attribute }` 的值 `{ $value }` 无效。该属性必须由以 `$` 开头的引用组成。\n\nmath-input-invalid-function-names = <mathInput>：已忽略 { $attribute } 中无效的函数名：{ $names }。每个名称的显示部分至少要有 2 个字符（字母或连字符）；其后可跟一个可选的 `|<mathspeak 替代读法>` 后缀。\n\n## Building components from the source\n\ncomponent-type-invalid = 组件类型无效：`<{ $componentType }>`\n\nattribute-repeated = 属性 { $attribute } 不能重复。\n\nattribute-invalid-for-component = 属性“{ $attribute }”对类型为 `<{ $componentType }>` 的组件无效。\n\n## Style definition contrast\n\nstyle-definition-insufficient-contrast =\n    样式定义 { $styleNumber } 的对比度不足：{ $context ->\n        [text-on-background] 文字颜色相对于背景色\n        [high-contrast] 高对比度颜色相对于画布\n        [line] 线条颜色相对于画布\n        [marker] 标记颜色相对于画布\n       *[text-on-canvas] 文字颜色相对于画布\n    }{ $mode ->\n        [dark] { "（深色模式）" }\n       *[light] { "" }\n    }（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。\n\nstyle-definition-dark-mode-text-background-contrast =\n    样式定义 { $styleNumber } 所指定的颜色在浅色模式下对比度足够，但由这些值推导出的深色模式颜色使文字与背景之间的对比度不足（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。{ $suggestion ->\n        [available] 为确保深色模式下对比度足够，可以提高浅色模式的对比度（例如设置 { $lightAttribute }="{ $lightColor }"），或覆盖深色模式的颜色（例如设置 { $darkAttribute }="{ $darkColor }"）。\n       *[none] 为确保深色模式下对比度足够，请提高浅色模式的对比度，或用 textColorDarkMode 和/或 backgroundColorDarkMode 覆盖推导出的颜色。\n    }\n\nstyle-definition-dark-mode-text-canvas-contrast =\n    样式定义 { $styleNumber } 所指定的文字颜色在浅色模式下对比度足够，但由该值推导出的深色模式文字颜色相对于画布对比度不足（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。{ $suggestion ->\n        [available] 为确保深色模式下对比度足够，可以提高浅色模式的对比度（例如设置 textColor="{ $lightColor }"），或覆盖深色模式的颜色（例如设置 textColorDarkMode="{ $darkColor }"）。\n       *[none] 为确保深色模式下对比度足够，请提高浅色模式的对比度，或用 textColorDarkMode 覆盖推导出的颜色。\n    }\n\nsection-multiple-style-palettes = 一个小节只能选择一个 <stylePalette>；使用最后一个。\n\n## Unique variants\n\nvariant-num-to-select-not-non-negative-integer = 无法确定 { $component } 的唯一变体，因为 numToSelect 不是非负整数。\n\nvariant-num-to-select-not-constant-number = 无法确定 { $component } 的唯一变体，因为 numToSelect 不是常数。\n\nvariant-with-replacement-not-constant-boolean = 无法确定 { $component } 的唯一变体，因为 withReplacement 不是常量布尔值。\n\nvariant-select-weight-disables-unique = 若某个选项指定了 selectWeight 或 selectForVariants，则 select 的唯一变体将被禁用\n\nvariant-coprime-undetermined = 无法确定 { $component } 的唯一变体，因为无法确定 coprime 始终为假。\n\nvariant-attribute-not-constant = 无法确定 { $component } 的唯一变体，因为 { $attribute } 不是常量。\n\nvariant-attribute-not-number = 无法确定 { $component } 的唯一变体，因为 { $attribute } 不是数字。\n\nvariant-attribute-wrong-type-for-sequence =\n    无法确定类型为 { $type } 的 { $component } 的唯一变体，因为 { $attribute } 不是{ $expected ->\n        [letters-combination] 字母组合\n        [math-expression] 有效的数学表达式\n        [integer] 整数\n       *[number] 数字\n    }。\n\nvariant-length-not-integer = 无法确定 { $component } 的唯一变体，因为 length 不是整数。\n\nvariant-sort-not-implemented = 尚未实现带 sort 的 { $component } 的唯一变体\n\nvariant-exclude-combinations-not-implemented = 尚未实现带 excludeCombinations 的 { $component } 的唯一变体\n\nvariant-math-exclude-not-implemented = 尚未实现带 exclude 的 math 类型 { $component } 的唯一变体\n\nvariant-non-constant-exclude-not-implemented = 尚未实现 exclude 非常量的 { $component } 的唯一变体\n\n## PreFigure conversion\n\nprefigure-descendant-unsupported = { $subject }：图形 prefigure 渲染器不支持；已跳过该后代。\n\nprefigure-descendant-invalid-geometry = { $subject }：几何数据非有限或不完整；已跳过该后代。\n\nprefigure-curve-label-omitted = { $subject }：转换后的曲线元素不支持标签；已省略标签。\n\nprefigure-curve-unsupported-definition-type = { $subject }：不支持的曲线函数定义类型“{ $definitionType }”；已跳过该后代。\n\nprefigure-region-flip-functions-unsupported = { $subject }：不支持 regionBetweenCurves 上的 flipFunctions 属性；已跳过该后代。\n\nprefigure-region-non-formula-child = { $subject }：regionBetweenCurves 只支持公式类型的子函数；已跳过该后代。\n\nprefigure-label-position-unsupported =\n    { $subject }：{ $labelKind ->\n        [line-family] 直线族标签\n       *[point] 点标签\n    }不支持 labelPosition“{ $labelPosition }”；改用 PreFigure 默认对齐方式。\n\nprefigure-fill-style-unsupported = { $subject }：PreFigure 不支持填充样式“{ $fillStyle }”；改用纯色填充。\n\nprefigure-line-style-unknown = { $subject }：未知的线条样式“{ $lineStyle }”已从 PreFigure 输出中省略。\n\nprefigure-marker-style-mapped-to-diamond = { $subject }：标记样式“{ $markerStyle }”已映射为 PreFigure 样式“diamond”。\n\nprefigure-marker-style-unsupported = { $subject }：PreFigure 不支持标记样式“{ $markerStyle }”；改用默认样式。\n\n## PreFigure annotations\n\nannotation-ref-unresolvable = `<annotation>`：`ref` 无效；无法解析目标。已省略该批注。\n\nannotation-ref-multiple-targets = `<annotation>`：`ref` 解析到多个目标；使用第一个目标。\n\nannotation-ref-outside-graph = `<annotation>`：`ref` 无效；目标位于所属图形之外。已省略该批注。\n\nannotation-ref-unsupported-target = `<annotation>`：`ref` 无效；在 prefigure 转换中，目标不是受支持的图形对象。已省略该批注。\n\nannotation-text-missing = `<annotation>`：`text` 缺失或为空；输出空文本。\n\n## Composites and references\n\ncomposite-circular-dependency =\n    { $componentType ->\n        [none] 检测到循环依赖。\n       *[other] 检测到涉及 `<{ $componentType }>` 组件的循环依赖。\n    }\n\nreference-no-referent = 未找到该引用所指的对象：`{ $reference }`\n\nreference-multiple-referents = 该引用指向了多个对象：`{ $reference }`\n\n## Children that do not match\n\nchildren-invalid-attribute-format = `<{ $componentType }>` 的属性 { $attribute } 格式无效。\n\nchildren-invalid = `<{ $componentType }>` 的子元素无效：发现无效的子元素：{ $children }\n\n## Falling back to a default\n\nattribute-value-invalid-using-default = 属性 `{ $attribute }` 的值 `{ $value }` 无效，改用值 `{ $default }`\n\n## Loading a DoenetML version\n\ndoenetml-version-not-found =\n    { $fallback ->\n        [none] 找不到 DoenetML 版本 { $version }。\n       *[other] 找不到 DoenetML 版本 { $version }。回退到版本 { $fallback }\n    }\n\n## Reading the DoenetML\n\nparse-invalid-doenetml = DoenetML 无效：{ $content }\n\nparse-tag-missing-close-tag = DoenetML 无效：标签 `{ $tag }` 没有结束标签。应为自闭合标签或 `</{ $tagName }>` 标签。\n\nparse-tag-error = DoenetML 无效：标签 `<{ $tagName }>` 中有错误\n\nparse-attribute-missing-value = DoenetML 无效：属性 `{ $attribute }` 似乎缺少值。\n\nparse-attribute-invalid = DoenetML 无效：属性 `{ $attribute }` 无效\n\nparse-attribute-value-invalid = DoenetML 无效：属性值 `{ $value }` 无效\n\nparse-attribute-value-quote-mismatch = DoenetML 无效：属性值 `{ $value }` 无效。引号不匹配，似乎缺少一个 `{ $quote }`\n\nparse-open-tag-name-missing = DoenetML 无效：发现没有标签名的标签，例如 `<`\n\nparse-tag-not-closed = DoenetML 无效：标签 `{ $tag }` 未闭合（似乎缺少 `>`）。\n\nparse-self-closing-tag-name-missing = DoenetML 无效：发现没有标签名的标签 `<{ $content }>`\n\nparse-self-closing-tag-not-closed = DoenetML 无效：标签 `{ $tag }` 未闭合（似乎缺少 `/>`）。\n\nparse-tag-invalid-attributes = DoenetML 无效：标签 `{ $tag }` 无效，其属性可能有误。\n\nparse-close-tag-name-missing = DoenetML 无效：发现没有标签名的结束标签，例如 `</`\n\nparse-attribute-value-unquoted = 属性值必须用引号括起来：`{ $attribute }="{ $value }"`\n\nparse-close-tag-without-open-tag = DoenetML 无效：发现结束标签 `{ $tag }`，但没有对应的开始标签\n\nparse-close-tag-mismatched = DoenetML 无效：结束标签不匹配。应为 `</{ $expected }>`，实际为 `{ $found }`\n\nparser-node-unconvertible = 无法将节点 { $node } 转换为 Dast 节点。\n\n## Names\n\nname-attribute-invalid =\n    属性 name=\'{ $name }\' 无效。{ $reason ->\n        [characters] 名称只能包含字母、数字、下划线或连字符。\n       *[start] 名称必须以字母开头。\n    }\n\ncomponent-name-invalid-start = 组件名称“{ $name }”无效。名称必须以字母开头。\n\n## `<answer>` sugar\n\nanswer-video-watched-missing-video = 类型为 videoWatched 的 answer 必须有 video 属性\n\nanswer-video-watched-video-not-reference = 类型为 videoWatched 的 answer 的 video 属性必须是一个引用\n\nanswer-name-not-single-text = answer 的 name 属性必须只有一个文本子元素\n\n## Referencing another document\n\nexternal-doenetml-recursion-limit = 递归层数过多，无法获取外部 DoenetML。是否存在循环引用？\n\nexternal-doenetml-unavailable = 无法从 { $attribute }="{ $uri }" 获取 DoenetML\n\nexternal-doenetml-type-mismatch = 从 { $attribute }="{ $uri }" 获取的 DoenetML 无效：它与组件类型“{ $componentType }”不匹配\n\n## Deprecated syntax\n\ndeprecated-attribute-renamed =\n    { $component ->\n        [none] [deprecation] 属性 `{ $from }` 已弃用；请改用 `{ $to }`。\n       *[other] [deprecation] `<{ $component }>` 上的属性 `{ $from }` 已弃用；请改用 `{ $to }`。\n    }\n\ndeprecated-attribute-renamed-conflict =\n    { $component ->\n        [none] [deprecation] 属性 `{ $from }` 已弃用并被忽略，因为同时指定了 `{ $to }`。\n       *[other] [deprecation] `<{ $component }>` 上的属性 `{ $from }` 已弃用并被忽略，因为同时指定了 `{ $to }`。\n    }\n\ndeprecated-attribute-ignored = [deprecation] `<{ $component }>` 上的属性 `{ $attribute }` 已弃用并被忽略。\n\n\n## Language coverage\n\npluralize-english-only = `<pluralize>` 只能处理英语的复数形式，因此在以 { $locale } 撰写的文档中，其文本保持不变。请直接写出复数形式，或用 `pluralForm` 属性指定。\n\n\n## Checking against the schema\n\nschema-element-unrecognized = 元素 `<{ $tag }>` 不是可识别的 Doenet 元素。\n\nschema-element-not-allowed-at-root = 元素 `<{ $tag }>` 不能出现在文档的根部。\n\nschema-element-not-allowed-inside = 元素 `<{ $tag }>` 不能出现在 `<{ $parent }>` 内部。\n\nschema-attribute-unrecognized = 元素 `<{ $tag }>` 没有名为 `{ $attribute }` 的属性。\n\nschema-attribute-value-not-allowed =\n    { $isList ->\n        [true] 元素 `<{ $tag }>` 的属性 `{ $attribute }` 必须是一个列表，其中每一项都是以下之一：{ $allowed }\n       *[other] 元素 `<{ $tag }>` 的属性 `{ $attribute }` 必须是以下之一：{ $allowed }\n    }\n\n\n## The `<select>` family\'s error boxes\n\nselect-variant-name-option-count-mismatch = select 的变体名称无效。变体名称 { $variantName } 出现在 { $numOptions } 个选项中，但要选择的数量是 { $numToSelect }。\n\nselect-variant-name-without-options = 为 select 指定了变体，但没有为可能的变体名称指定选项：{ $variantName }。\n\nselect-variant-name-not-possible = 为 select 指定的变体名称 { $variantName } 不是可能的变体名称。\n\nselect-too-few-options = 无法从仅有的 { $numOptions } 个组件中选择 { $numToSelect } 个。\n\nselect-from-sequence-too-few-values = 无法从长度为 { $length } 的数列中选择 { $numToSelect } 个值。\n\nselect-from-sequence-indices-count-mismatch = 为 select 指定的索引数量必须与要选择的数量一致\n\nselect-from-sequence-indices-not-integers = 为 select 指定的所有索引必须是整数\n\nselect-from-sequence-index-excluded = 为 selectfromsequence 指定的索引已被排除\n\nselect-from-sequence-indices-excluded-combination = 为 selectfromsequence 指定的索引构成了被排除的组合\n\nselect-from-sequence-coprime-not-positive-integers = 无法选择互质组合，因为所选的不是正整数。\n\nselect-from-sequence-coprime-common-factor = 无法选择互质的数。所有可能的值都有公因数。（指定的 "from" 或 "to" 必须与 "step" 互质。）\n\nselect-from-sequence-coprime-single-number = 无法从单个不为 1 的数中选择互质组合。\n\nselect-from-sequence-excluded-too-many-combinations = selectFromSequence 中排除了超过 70% 的组合\n\nselect-from-sequence-coprime-none-found = 未能选出互质的数。所有可能的值都有公因数。\n\nselect-from-sequence-too-few-unique-values = 无法从长度为 { $numPossibleValues } 的数列中选择 { $numToSelect } 个互不相同的值\n\nselect-prime-numbers-too-few-values = 无法从长度为 { $numValues } 的素数表中选择 { $numToSelect } 个值\n\nselect-prime-numbers-values-count-mismatch = 为 select 指定的值的数量必须与要选择的数量一致\n\nselect-prime-numbers-values-not-prime = 为 select prime number 指定的所有值都必须在素数表中\n\nselect-prime-numbers-values-excluded-combination = 为 selectPrimeNumbers 指定的值构成了被排除的组合\n\nselect-prime-numbers-excluded-too-many-combinations = selectPrimeNumbers 中排除了超过 70% 的组合\n\nselect-random-combination-fluke = 由于极其罕见的巧合，未能选出随机值的组合\n\nselect-random-value-fluke = 由于极其罕见的巧合，未能选出随机值\n';
+export {
+  diagnostics as default
+};
+//# sourceMappingURL=diagnostics-Z-Cb-y6t-Z-Cb-y6t.js.map

package/diagnostics-Z-Cb-y6t-Z-Cb-y6t.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"diagnostics-Z-Cb-y6t-Z-Cb-y6t.js","sources":["../../../i18n/dist/diagnostics-Z-Cb-y6t.js"],"sourcesContent":["const diagnostics = '# Simplified Chinese diagnostics. Translated from `locales/en/diagnostics.ftl`,\\n# which is the source of truth: `lint:i18n` rejects a key that does not exist\\n# there, and reports a key that exists there but not here as missing coverage.\\n#\\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\\n# Correct anything here freely; nothing in it was written by a translator.\\n#\\n# Attribute names, element names and every other DoenetML identifier —\\n# `through`, `endpoint`, `midpointOffset`, `numDimensions`, `<answer>`,\\n# `selectFromSequence` — are part of the language, not prose, and stay in\\n# English exactly as written. So does anything quoted back from the author\\'s\\n# own source.\\n#\\n# Chinese has a single plural category, so a countable message needs no\\n# selection.\\n\\n## `<lineSegment>`\\n\\nline-segment-attributes-ignored-with-endpoints = 指定两个端点时，{ $attributes } 会被忽略\\n\\nline-segment-attributes-ignored-with-endpoint-and-midpoint = 同时指定端点和中点时，{ $attributes } 会被忽略\\n\\nline-segment-midpoint-offset-without-midpoint = 没有中点时 midpointOffset 不起作用\\n\\n## `<line>`\\n\\nline-points-undetermined-dimensions = 直线经过的点维数不确定。\\n\\nline-points-too-few-dimensions = 直线必须经过至少二维的点。\\n\\nline-points-depend-on-variables = 直线经过的点依赖于变量：{ $variables }。\\n\\nline-equation-invalid-format = 以变量 { $variable1 } 和 { $variable2 } 表示的直线方程格式无效。\\n\\n## `<ray>`\\n\\nray-overprescribed-through = 射线同时由 through、endpoint 和 direction 确定。忽略所指定的 through。\\n\\nray-dimension-mismatch = 射线中的 numDimensions 不一致。\\n\\n## `<vector>`\\n\\nvector-overprescribed-head = 向量同时由 head、tail 和 displacement 确定。忽略所指定的 head。\\n\\nvector-dimension-mismatch = 向量中的 numDimensions 不一致。\\n\\n## Attracting and constraining\\n\\nattract-to-without-nearest-point = 无法吸附到 `<{ $component }>`，因为它没有 nearestPoint 状态变量。\\n\\nconstrain-to-without-nearest-point = 无法约束到 `<{ $component }>`，因为它没有 nearestPoint 状态变量。\\n\\nconstrain-to-interior-without-nearest-point = 无法约束到 `<{ $component }>` 的内部，因为它没有 nearestPoint 状态变量。\\n\\n## `<choiceInput>`\\n\\nchoice-input-label-position-ignored = 对于非内联的 choiceInput，labelPosition 会被忽略\\n\\n## Ordering children by index\\n\\nchoice-input-indices-count-mismatch = 忽略为 choiceInput 指定的 indices，因为其数量与 choice 子元素的数量不符。\\n\\npretzel-indices-count-mismatch = 忽略为 problem 指定的 indices，因为其数量与 problem 子元素的数量不符。\\n\\nshuffle-indices-count-mismatch = 忽略为 shuffle 指定的 indices，因为其数量与组件数量不符。\\n\\nindices-ignored-out-of-range = 忽略为 { $component } 指定的 indices，因为有些超出范围。\\n\\npretzel-indices-repeated = 忽略为 pretzel 指定的 indices，因为有些重复。\\n\\npretzel-circuit-first-index = 忽略在 circuit 模式下为 pretzel 指定的 indices，因为第一个索引必须是 1。\\n\\n## `<shuffle>` and `<sort>`\\n\\nstring-children-need-type = 要让 `<{ $component }>` 支持字符串子元素，必须指定 `type` 属性。\\n\\ninvalid-type-defaulting-to-math = 组件 { $component } 的类型 { $type } 无效。它必须是 math、text、number 或 boolean 之一。改用 math。\\n\\nstring-not-valid-component-to-arrange = 字符串“{ $value }”不是 { $component } 的有效组件。已忽略。\\n\\n## Types and variables\\n\\ninvalid-type-defaulting-to-number = 类型 { $type } 无效，类型改设为 number。\\n\\ninvalid-variable-value = 变量的值无效：`{ $value }`\\n\\n## Variants\\n\\nvariant-index-must-be-number = 变体索引 { $index } 必须是数字\\n\\nvariant-index-must-be-integer = 变体索引 { $index } 必须是整数\\n\\n## `<sideBySide>`\\n\\nside-by-side-absolute-widths = `<{ $component }>` 未实现绝对尺寸。宽度改为相对值。\\n\\nside-by-side-absolute-margins = `<{ $component }>` 未实现绝对尺寸。边距改为相对值。\\n\\nside-by-side-no-block-child = 无效的 `<{ $component }>`：它必须至少有一个块级子元素。\\n\\n## `<label>`\\n\\nlabel-for-ignored-on-graphical = 图形 `<label>` 上的 `for` 属性会被忽略。\\n\\nlabel-for-must-resolve-to-one = `<label>` 上的 `for` 属性必须恰好解析为一个组件。\\n\\nlabel-for-unresolved = `<label>` 上的 `for` 属性无法解析为组件。\\n\\nlabel-for-answer-with-authored-inputs = `<label>` 上的 `for` 属性引用了一个显式书写了输入的 `<answer>`；请直接引用该输入。\\n\\nlabel-for-answer-without-input = `<label>` 上的 `for` 属性引用了一个没有可标注输入的 `<answer>`。\\n\\nlabel-for-must-reference-input-or-answer = `<label>` 上的 `for` 属性必须引用一个输入或一个答案。\\n\\n## Accessibility\\n\\naccessibility-short-description-or-decorative = 为了无障碍，`<{ $component }>` 必须有简短描述，或被标为装饰性元素。\\n\\naccessibility-video-short-description = 为了无障碍，`<video>` 必须有简短描述。\\n\\naccessibility-input-short-description-or-label = 为了无障碍，`<{ $component }>` 必须有简短描述或标签。\\n\\naccessibility-answer-input-short-description-or-label = 为了无障碍，创建输入的 `<answer>` 必须有简短描述或标签。\\n\\naccessibility-short-description-contains-math = 简短描述中不应包含 `<{ $component }>` 这类数学组件。请用文字把数学内容写出来。\\n\\naccessibility-section-title-insufficient-contrast =\\n    { $mode ->\\n        [dark] { $colorName } 对小节标题文字的对比度不足（深色模式）（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。\\n       *[other] { $colorName } 对小节标题文字的对比度不足（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。\\n    }\\n\\n## `<circle>`\\n\\ncircle-through-points-non-numerical = 当各点没有数值时，尚未实现经过 { $count } 个点的 `<circle>`。\\n\\ncircle-too-many-through-points = 无法计算经过 3 个以上点的圆。\\n\\ncircle-overprescribed-radius-center-points = 无法计算同时指定了半径、圆心和经过点的圆。\\n\\ncircle-center-with-multiple-points = 无法计算指定圆心且经过 1 个以上点的圆。\\n\\ncircle-radius-too-small = 无法计算该圆：两点间距离为 { $distance }，所指定的半径 { $radius } 太小。\\n\\ncircle-radius-with-many-points = 无法在指定半径的情况下创建经过两个以上点的圆。\\n\\ncircle-invalid-center-or-through-points = 圆的圆心或经过点无效。\\n\\ncircle-radius-center-with-multiple-points = 无法计算指定圆心且经过 1 个以上点的圆的半径。\\n\\ncircle-change-radius-non-numerical = 无法更改经过点非数值的圆的半径\\n\\ncircle-radius-with-points-non-numerical = 在没有数值的情况下，无法在指定半径时创建经过一个以上点的圆。\\n\\ncircle-change-center-non-numerical = 尚未实现更改经过非数值点的圆的圆心。\\n\\n## `<function>`\\n\\nfunction-domain-insufficient-dimensions = 函数定义域的维数不足。定义域有 { $intervals } 个区间，而该函数有 { $inputs } 个输入。\\n\\nfunction-domain-invalid-format = 函数定义域的格式无效。\\n\\nfunction-ignoring-non-numerical =\\n    { $type ->\\n        [maximum] 忽略函数的非数值最大值。\\n        [minimum] 忽略函数的非数值最小值。\\n        [extremum] 忽略函数的非数值极值。\\n        [point] 忽略函数的非数值点。\\n        [slope] 忽略函数的非数值斜率。\\n       *[other] 忽略函数的非数值 { $type }。\\n    }\\n\\nfunction-ignoring-empty =\\n    { $type ->\\n        [maximum] 忽略函数的空最大值。\\n        [minimum] 忽略函数的空最小值。\\n        [extremum] 忽略函数的空极值。\\n        [point] 忽略函数的空点。\\n       *[other] 忽略函数的空 { $type }。\\n    }\\n\\nfunction-points-too-close = 函数中有两个点位置过于接近，无法定义该函数。\\n\\nfunction-iterates-input-output-mismatch = 只有输入个数等于输出个数时才能进行函数迭代。该函数有 { $inputs } 个输入和 { $outputs } 个输出。\\n\\n## `<sequence>`\\n\\nsequence-invalid-length = 数列长度无效。它必须是非负整数。\\n\\nsequence-invalid-step = 数列步长无效。对于类型为 { $type } 的数列，它必须是数字。\\n\\nsequence-invalid-endpoint-number = 数字数列的“{ $attribute }”无效。它必须是数字。\\n\\nsequence-invalid-endpoint-letters = 字母数列的“{ $attribute }”无效。它必须是字母组合。\\n\\nsequence-invalid-endpoint = 数列的“{ $attribute }”无效。\\n\\nselect-from-sequence-coprime-not-numbers = 忽略 coprime，因为所选的不是数字\\n\\nselect-from-sequence-coprime-with-exclude-combinations = 忽略 coprime，因为已指定 excludeCombinations\\n\\n## Resolving a `target`\\n\\ntarget-not-found = `<{ $source }>` 的 target 无效：找不到目标。\\n\\ntarget-state-variable-not-found = `<{ $source }>` 的 target 无效：在 `<{ $component }>` 上找不到名为“{ $property }”的状态变量。\\n\\n## `<odeSystem>`\\n\\node-system-variables-match-independent = `<odeSystem>` 的变量必须不同于自变量。\\n\\node-system-duplicate-variable-names = 无法用重复的因变量名定义 ODE 右端函数。\\n\\node-system-rhs-function-error = 无法定义 ODE 右端函数。创建 mathjs 函数时出错。\\n\\n## `<angle>`, `<parabola>`, and `<intersection>`\\n\\nangle-too-many-lines = 无法定义 { $count } 条直线之间的角\\n\\nangle-invalid-through-point = `<angle>` 的 through 中有无效的点\\n\\nparabola-vertex-too-many-points = 尚未实现指定顶点且经过 1 个以上点的抛物线。\\n\\nparabola-too-many-points = 尚未实现经过 3 个以上点的抛物线。\\n\\nintersection-too-many-items = 尚未实现两个以上对象的交集\\n\\n## Other math components\\n\\nionic-compound-not-two-ions = 尚未实现两个离子以外的离子化合物。\\n\\nionic-compound-needs-cation-and-anion = 离子化合物仅实现了一个阳离子和一个阴离子的情形。\\n\\nsolve-equations-cannot-evaluate = 无法求解方程，因为无法对其求值：{ $equation }\\n\\nmath-operators-operand-number-required = 提取数学运算对象时必须指定 operandNumber。\\n\\neigen-decomposition-failed = 无法计算矩阵的特征值\\n\\n## `<matchesPattern>`\\n\\nmatches-pattern-parameter-not-in-pattern = `<matchesPattern>`：参数 { $parameters } 未出现在模式中，因此总是会匹配空白。\\n\\n## `<graph>`\\n\\ngraph-grid-invalid = `<graph>`：无法解析 grid=\"{ $grid }\"。它必须是 none、medium、dense，或以空格分隔的两个正数，例如 grid=\"1 0.5\"。不绘制网格。\\n\\n## PreFigure renderer\\n\\nprefigure-x-label-position-unsupported = `<graph>`：prefigure 渲染器不支持 xLabelPosition=\"left\"；改用右侧位置的行为。\\n\\nprefigure-y-label-position-unsupported = `<graph>`：prefigure 渲染器不支持 yLabelPosition=\"bottom\"；改用顶部位置的行为。\\n\\nprefigure-invalid-axis-bounds = `<graph>`：prefigure 转换的坐标轴范围无效；改用默认 bbox (-10,-10,10,10)。\\n\\nprefigure-invalid-width = `<graph>`：prefigure 转换的宽度无效；改用默认图形宽度 425。\\n\\nprefigure-invalid-aspect-ratio = `<graph>`：prefigure 转换的 aspectRatio 无效；改用默认宽高比 1。\\n\\nprefigure-grid-spacing-too-fine = `<graph>`：相对于坐标轴范围，网格间距过密；prefigure 渲染器中省略网格。\\n\\nprefigure-annotations-not-rendered = `<graph>`：不使用 PreFigure 渲染器时不会绘制批注。\\n\\nmultiple-annotations-children = 在 `<graph>` 中发现多个 `<annotations>` 子元素；除最后一个外全部忽略。\\n\\n## Referring to other components\\n\\ncopy-unrecognized-component-type = 无法扩展或复制无法识别的组件类型：{ $type }。\\n\\ncopy-prop-not-found = 在类型为 { $component } 的组件上找不到属性 { $property }\\n\\ncollect-no-source = 未找到 collect 的来源。\\n\\ncollect-invalid-component-type = 无法收集类型为 `<{ $component }>` 的组件，因为这不是有效的组件类型。\\n\\nreference-index-unavailable = 无法引用索引 `{ $reference }`\\n\\n## `<callAction>`\\n\\ncomponent-action-unavailable = 无法在组件 `{ $reference }` 上调用 { $action }\\n\\n## `<dataFrame>`\\n\\ndata-frame-inconsistent-row-lengths = 数据形状无效。各行长度不一致。发现于 componentIdx :{ $componentIdx }\\n\\ndata-frame-duplicate-column-names = 数据中有重复的列名。发现于 componentIdx :{ $componentIdx }\\n\\ndata-frame-missing-column-name = 数据缺少列名。发现于 componentIdx :{ $componentIdx }\\n\\n## `<answer>` and scoring\\n\\nanswer-award-depends-on-own-response = 该答案的某个 award 依赖于 answer 标签自身提交的回答，这会导致意外行为。\\n\\nanswer-max-num-attempts-in-section-wide-check-work = 在带 `sectionWideCheckWork` 的容器内的 `<answer>` 上设置 `maxNumAttempts` 不起作用，因为尝试次数由容器控制。请改在容器上设置 `maxNumAttempts`。\\n\\nnested-section-wide-check-work-max-num-attempts = 在位于另一个带 `sectionWideCheckWork` 的容器内、且自身也带 `sectionWideCheckWork` 的容器上设置 `maxNumAttempts` 不起作用，因为尝试次数由外层容器控制。请在外层容器上设置 `maxNumAttempts`。\\n\\nanswer-attributes-need-symbolic-equality = 未设置 symbolicEquality 时，{ $attributes } 属性不会起作用。\\n\\nanswer-invalid-type = answer 的类型无效：{ $type }\\n\\n## `<module>`, `<conditionalContent>`, `<slider>`, `<pretzel>`\\n\\nmodule-attribute-child-needs-name = 由于组件 `<{ $component }>` 没有名称，它不能用作模块属性\\n\\nmodule-attribute-name-already-defined = 组件 `<{ $component } name=\"{ $name }\">` 不能用作模块的属性，因为组件类型 `<module>` 已经定义了名为“{ $name }”的属性。\\n\\nconditional-content-condition-ignored = 在带有 case 或 else 子元素的 `<conditionalContent>` 组件上，`condition` 属性会被忽略。\\n\\nslider-markers-type-mismatch = 标记的类型与滑块的类型不匹配。\\n\\npretzel-problem-needs-statement-and-answer = 无效的 pretzel：每个 `<problem>` 必须包含一个 `<statement>` 和一个 `<answer>`。\\n\\npretzel-circuit-first-problem-distractor = 无效的 pretzel：在 mode=\"circuit\" 下，第一个 `<problem>` 不能是干扰项。\\n\\n## Attribute values\\n\\nattribute-invalid-values = 属性 `{ $attribute }` 的值 { $values } 无效；已忽略。\\n\\nattribute-must-be-references = 属性 `{ $attribute }` 的值 `{ $value }` 无效。该属性必须由以 `$` 开头的引用组成。\\n\\nmath-input-invalid-function-names = <mathInput>：已忽略 { $attribute } 中无效的函数名：{ $names }。每个名称的显示部分至少要有 2 个字符（字母或连字符）；其后可跟一个可选的 `|<mathspeak 替代读法>` 后缀。\\n\\n## Building components from the source\\n\\ncomponent-type-invalid = 组件类型无效：`<{ $componentType }>`\\n\\nattribute-repeated = 属性 { $attribute } 不能重复。\\n\\nattribute-invalid-for-component = 属性“{ $attribute }”对类型为 `<{ $componentType }>` 的组件无效。\\n\\n## Style definition contrast\\n\\nstyle-definition-insufficient-contrast =\\n    样式定义 { $styleNumber } 的对比度不足：{ $context ->\\n        [text-on-background] 文字颜色相对于背景色\\n        [high-contrast] 高对比度颜色相对于画布\\n        [line] 线条颜色相对于画布\\n        [marker] 标记颜色相对于画布\\n       *[text-on-canvas] 文字颜色相对于画布\\n    }{ $mode ->\\n        [dark] { \"（深色模式）\" }\\n       *[light] { \"\" }\\n    }（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。\\n\\nstyle-definition-dark-mode-text-background-contrast =\\n    样式定义 { $styleNumber } 所指定的颜色在浅色模式下对比度足够，但由这些值推导出的深色模式颜色使文字与背景之间的对比度不足（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。{ $suggestion ->\\n        [available] 为确保深色模式下对比度足够，可以提高浅色模式的对比度（例如设置 { $lightAttribute }=\"{ $lightColor }\"），或覆盖深色模式的颜色（例如设置 { $darkAttribute }=\"{ $darkColor }\"）。\\n       *[none] 为确保深色模式下对比度足够，请提高浅色模式的对比度，或用 textColorDarkMode 和/或 backgroundColorDarkMode 覆盖推导出的颜色。\\n    }\\n\\nstyle-definition-dark-mode-text-canvas-contrast =\\n    样式定义 { $styleNumber } 所指定的文字颜色在浅色模式下对比度足够，但由该值推导出的深色模式文字颜色相对于画布对比度不足（{ NUMBER($ratio, minimumFractionDigits: 2, maximumFractionDigits: 2) }:1；至少需要 { $threshold }:1）。{ $suggestion ->\\n        [available] 为确保深色模式下对比度足够，可以提高浅色模式的对比度（例如设置 textColor=\"{ $lightColor }\"），或覆盖深色模式的颜色（例如设置 textColorDarkMode=\"{ $darkColor }\"）。\\n       *[none] 为确保深色模式下对比度足够，请提高浅色模式的对比度，或用 textColorDarkMode 覆盖推导出的颜色。\\n    }\\n\\nsection-multiple-style-palettes = 一个小节只能选择一个 <stylePalette>；使用最后一个。\\n\\n## Unique variants\\n\\nvariant-num-to-select-not-non-negative-integer = 无法确定 { $component } 的唯一变体，因为 numToSelect 不是非负整数。\\n\\nvariant-num-to-select-not-constant-number = 无法确定 { $component } 的唯一变体，因为 numToSelect 不是常数。\\n\\nvariant-with-replacement-not-constant-boolean = 无法确定 { $component } 的唯一变体，因为 withReplacement 不是常量布尔值。\\n\\nvariant-select-weight-disables-unique = 若某个选项指定了 selectWeight 或 selectForVariants，则 select 的唯一变体将被禁用\\n\\nvariant-coprime-undetermined = 无法确定 { $component } 的唯一变体，因为无法确定 coprime 始终为假。\\n\\nvariant-attribute-not-constant = 无法确定 { $component } 的唯一变体，因为 { $attribute } 不是常量。\\n\\nvariant-attribute-not-number = 无法确定 { $component } 的唯一变体，因为 { $attribute } 不是数字。\\n\\nvariant-attribute-wrong-type-for-sequence =\\n    无法确定类型为 { $type } 的 { $component } 的唯一变体，因为 { $attribute } 不是{ $expected ->\\n        [letters-combination] 字母组合\\n        [math-expression] 有效的数学表达式\\n        [integer] 整数\\n       *[number] 数字\\n    }。\\n\\nvariant-length-not-integer = 无法确定 { $component } 的唯一变体，因为 length 不是整数。\\n\\nvariant-sort-not-implemented = 尚未实现带 sort 的 { $component } 的唯一变体\\n\\nvariant-exclude-combinations-not-implemented = 尚未实现带 excludeCombinations 的 { $component } 的唯一变体\\n\\nvariant-math-exclude-not-implemented = 尚未实现带 exclude 的 math 类型 { $component } 的唯一变体\\n\\nvariant-non-constant-exclude-not-implemented = 尚未实现 exclude 非常量的 { $component } 的唯一变体\\n\\n## PreFigure conversion\\n\\nprefigure-descendant-unsupported = { $subject }：图形 prefigure 渲染器不支持；已跳过该后代。\\n\\nprefigure-descendant-invalid-geometry = { $subject }：几何数据非有限或不完整；已跳过该后代。\\n\\nprefigure-curve-label-omitted = { $subject }：转换后的曲线元素不支持标签；已省略标签。\\n\\nprefigure-curve-unsupported-definition-type = { $subject }：不支持的曲线函数定义类型“{ $definitionType }”；已跳过该后代。\\n\\nprefigure-region-flip-functions-unsupported = { $subject }：不支持 regionBetweenCurves 上的 flipFunctions 属性；已跳过该后代。\\n\\nprefigure-region-non-formula-child = { $subject }：regionBetweenCurves 只支持公式类型的子函数；已跳过该后代。\\n\\nprefigure-label-position-unsupported =\\n    { $subject }：{ $labelKind ->\\n        [line-family] 直线族标签\\n       *[point] 点标签\\n    }不支持 labelPosition“{ $labelPosition }”；改用 PreFigure 默认对齐方式。\\n\\nprefigure-fill-style-unsupported = { $subject }：PreFigure 不支持填充样式“{ $fillStyle }”；改用纯色填充。\\n\\nprefigure-line-style-unknown = { $subject }：未知的线条样式“{ $lineStyle }”已从 PreFigure 输出中省略。\\n\\nprefigure-marker-style-mapped-to-diamond = { $subject }：标记样式“{ $markerStyle }”已映射为 PreFigure 样式“diamond”。\\n\\nprefigure-marker-style-unsupported = { $subject }：PreFigure 不支持标记样式“{ $markerStyle }”；改用默认样式。\\n\\n## PreFigure annotations\\n\\nannotation-ref-unresolvable = `<annotation>`：`ref` 无效；无法解析目标。已省略该批注。\\n\\nannotation-ref-multiple-targets = `<annotation>`：`ref` 解析到多个目标；使用第一个目标。\\n\\nannotation-ref-outside-graph = `<annotation>`：`ref` 无效；目标位于所属图形之外。已省略该批注。\\n\\nannotation-ref-unsupported-target = `<annotation>`：`ref` 无效；在 prefigure 转换中，目标不是受支持的图形对象。已省略该批注。\\n\\nannotation-text-missing = `<annotation>`：`text` 缺失或为空；输出空文本。\\n\\n## Composites and references\\n\\ncomposite-circular-dependency =\\n    { $componentType ->\\n        [none] 检测到循环依赖。\\n       *[other] 检测到涉及 `<{ $componentType }>` 组件的循环依赖。\\n    }\\n\\nreference-no-referent = 未找到该引用所指的对象：`{ $reference }`\\n\\nreference-multiple-referents = 该引用指向了多个对象：`{ $reference }`\\n\\n## Children that do not match\\n\\nchildren-invalid-attribute-format = `<{ $componentType }>` 的属性 { $attribute } 格式无效。\\n\\nchildren-invalid = `<{ $componentType }>` 的子元素无效：发现无效的子元素：{ $children }\\n\\n## Falling back to a default\\n\\nattribute-value-invalid-using-default = 属性 `{ $attribute }` 的值 `{ $value }` 无效，改用值 `{ $default }`\\n\\n## Loading a DoenetML version\\n\\ndoenetml-version-not-found =\\n    { $fallback ->\\n        [none] 找不到 DoenetML 版本 { $version }。\\n       *[other] 找不到 DoenetML 版本 { $version }。回退到版本 { $fallback }\\n    }\\n\\n## Reading the DoenetML\\n\\nparse-invalid-doenetml = DoenetML 无效：{ $content }\\n\\nparse-tag-missing-close-tag = DoenetML 无效：标签 `{ $tag }` 没有结束标签。应为自闭合标签或 `</{ $tagName }>` 标签。\\n\\nparse-tag-error = DoenetML 无效：标签 `<{ $tagName }>` 中有错误\\n\\nparse-attribute-missing-value = DoenetML 无效：属性 `{ $attribute }` 似乎缺少值。\\n\\nparse-attribute-invalid = DoenetML 无效：属性 `{ $attribute }` 无效\\n\\nparse-attribute-value-invalid = DoenetML 无效：属性值 `{ $value }` 无效\\n\\nparse-attribute-value-quote-mismatch = DoenetML 无效：属性值 `{ $value }` 无效。引号不匹配，似乎缺少一个 `{ $quote }`\\n\\nparse-open-tag-name-missing = DoenetML 无效：发现没有标签名的标签，例如 `<`\\n\\nparse-tag-not-closed = DoenetML 无效：标签 `{ $tag }` 未闭合（似乎缺少 `>`）。\\n\\nparse-self-closing-tag-name-missing = DoenetML 无效：发现没有标签名的标签 `<{ $content }>`\\n\\nparse-self-closing-tag-not-closed = DoenetML 无效：标签 `{ $tag }` 未闭合（似乎缺少 `/>`）。\\n\\nparse-tag-invalid-attributes = DoenetML 无效：标签 `{ $tag }` 无效，其属性可能有误。\\n\\nparse-close-tag-name-missing = DoenetML 无效：发现没有标签名的结束标签，例如 `</`\\n\\nparse-attribute-value-unquoted = 属性值必须用引号括起来：`{ $attribute }=\"{ $value }\"`\\n\\nparse-close-tag-without-open-tag = DoenetML 无效：发现结束标签 `{ $tag }`，但没有对应的开始标签\\n\\nparse-close-tag-mismatched = DoenetML 无效：结束标签不匹配。应为 `</{ $expected }>`，实际为 `{ $found }`\\n\\nparser-node-unconvertible = 无法将节点 { $node } 转换为 Dast 节点。\\n\\n## Names\\n\\nname-attribute-invalid =\\n    属性 name=\\'{ $name }\\' 无效。{ $reason ->\\n        [characters] 名称只能包含字母、数字、下划线或连字符。\\n       *[start] 名称必须以字母开头。\\n    }\\n\\ncomponent-name-invalid-start = 组件名称“{ $name }”无效。名称必须以字母开头。\\n\\n## `<answer>` sugar\\n\\nanswer-video-watched-missing-video = 类型为 videoWatched 的 answer 必须有 video 属性\\n\\nanswer-video-watched-video-not-reference = 类型为 videoWatched 的 answer 的 video 属性必须是一个引用\\n\\nanswer-name-not-single-text = answer 的 name 属性必须只有一个文本子元素\\n\\n## Referencing another document\\n\\nexternal-doenetml-recursion-limit = 递归层数过多，无法获取外部 DoenetML。是否存在循环引用？\\n\\nexternal-doenetml-unavailable = 无法从 { $attribute }=\"{ $uri }\" 获取 DoenetML\\n\\nexternal-doenetml-type-mismatch = 从 { $attribute }=\"{ $uri }\" 获取的 DoenetML 无效：它与组件类型“{ $componentType }”不匹配\\n\\n## Deprecated syntax\\n\\ndeprecated-attribute-renamed =\\n    { $component ->\\n        [none] [deprecation] 属性 `{ $from }` 已弃用；请改用 `{ $to }`。\\n       *[other] [deprecation] `<{ $component }>` 上的属性 `{ $from }` 已弃用；请改用 `{ $to }`。\\n    }\\n\\ndeprecated-attribute-renamed-conflict =\\n    { $component ->\\n        [none] [deprecation] 属性 `{ $from }` 已弃用并被忽略，因为同时指定了 `{ $to }`。\\n       *[other] [deprecation] `<{ $component }>` 上的属性 `{ $from }` 已弃用并被忽略，因为同时指定了 `{ $to }`。\\n    }\\n\\ndeprecated-attribute-ignored = [deprecation] `<{ $component }>` 上的属性 `{ $attribute }` 已弃用并被忽略。\\n\\n\\n## Language coverage\\n\\npluralize-english-only = `<pluralize>` 只能处理英语的复数形式，因此在以 { $locale } 撰写的文档中，其文本保持不变。请直接写出复数形式，或用 `pluralForm` 属性指定。\\n\\n\\n## Checking against the schema\\n\\nschema-element-unrecognized = 元素 `<{ $tag }>` 不是可识别的 Doenet 元素。\\n\\nschema-element-not-allowed-at-root = 元素 `<{ $tag }>` 不能出现在文档的根部。\\n\\nschema-element-not-allowed-inside = 元素 `<{ $tag }>` 不能出现在 `<{ $parent }>` 内部。\\n\\nschema-attribute-unrecognized = 元素 `<{ $tag }>` 没有名为 `{ $attribute }` 的属性。\\n\\nschema-attribute-value-not-allowed =\\n    { $isList ->\\n        [true] 元素 `<{ $tag }>` 的属性 `{ $attribute }` 必须是一个列表，其中每一项都是以下之一：{ $allowed }\\n       *[other] 元素 `<{ $tag }>` 的属性 `{ $attribute }` 必须是以下之一：{ $allowed }\\n    }\\n\\n\\n## The `<select>` family\\'s error boxes\\n\\nselect-variant-name-option-count-mismatch = select 的变体名称无效。变体名称 { $variantName } 出现在 { $numOptions } 个选项中，但要选择的数量是 { $numToSelect }。\\n\\nselect-variant-name-without-options = 为 select 指定了变体，但没有为可能的变体名称指定选项：{ $variantName }。\\n\\nselect-variant-name-not-possible = 为 select 指定的变体名称 { $variantName } 不是可能的变体名称。\\n\\nselect-too-few-options = 无法从仅有的 { $numOptions } 个组件中选择 { $numToSelect } 个。\\n\\nselect-from-sequence-too-few-values = 无法从长度为 { $length } 的数列中选择 { $numToSelect } 个值。\\n\\nselect-from-sequence-indices-count-mismatch = 为 select 指定的索引数量必须与要选择的数量一致\\n\\nselect-from-sequence-indices-not-integers = 为 select 指定的所有索引必须是整数\\n\\nselect-from-sequence-index-excluded = 为 selectfromsequence 指定的索引已被排除\\n\\nselect-from-sequence-indices-excluded-combination = 为 selectfromsequence 指定的索引构成了被排除的组合\\n\\nselect-from-sequence-coprime-not-positive-integers = 无法选择互质组合，因为所选的不是正整数。\\n\\nselect-from-sequence-coprime-common-factor = 无法选择互质的数。所有可能的值都有公因数。（指定的 \"from\" 或 \"to\" 必须与 \"step\" 互质。）\\n\\nselect-from-sequence-coprime-single-number = 无法从单个不为 1 的数中选择互质组合。\\n\\nselect-from-sequence-excluded-too-many-combinations = selectFromSequence 中排除了超过 70% 的组合\\n\\nselect-from-sequence-coprime-none-found = 未能选出互质的数。所有可能的值都有公因数。\\n\\nselect-from-sequence-too-few-unique-values = 无法从长度为 { $numPossibleValues } 的数列中选择 { $numToSelect } 个互不相同的值\\n\\nselect-prime-numbers-too-few-values = 无法从长度为 { $numValues } 的素数表中选择 { $numToSelect } 个值\\n\\nselect-prime-numbers-values-count-mismatch = 为 select 指定的值的数量必须与要选择的数量一致\\n\\nselect-prime-numbers-values-not-prime = 为 select prime number 指定的所有值都必须在素数表中\\n\\nselect-prime-numbers-values-excluded-combination = 为 selectPrimeNumbers 指定的值构成了被排除的组合\\n\\nselect-prime-numbers-excluded-too-many-combinations = selectPrimeNumbers 中排除了超过 70% 的组合\\n\\nselect-random-combination-fluke = 由于极其罕见的巧合，未能选出随机值的组合\\n\\nselect-random-value-fluke = 由于极其罕见的巧合，未能选出随机值\\n';\nexport {\n  diagnostics as default\n};\n//# sourceMappingURL=diagnostics-Z-Cb-y6t.js.map\n"],"names":[],"mappings":"AAAK,MAAC,cAAc;"}

package/editor-B4HbP_jI-B4HbP_jI.js

@@ -0,0 +1,5 @@
+const editor = '# Indonesian editor and language-server surfaces. Translated from\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\n# key that does not exist there, and reports a key that exists there but not\n# here as missing coverage.\n#\n# Message ids are never translated — only the text to the right of `=`.\n#\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\n# Correct anything here freely; nothing in it was written by a translator.\n#\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\n# name are identifiers, not prose, and stay as written.\n#\n# Indonesian has a single plural category, so a countable message needs no\n# selection — `[other]` covers every count.\n\n\n## The viewer\'s controls\n\neditor-update-viewer =\n    { $action ->\n        [reset] Setel ulang\n       *[update] Perbarui\n    }\n\neditor-update-viewer-title =\n    { $shortcut ->\n        [none] { $word } penampil\n       *[other] { $word } penampil { $shortcut }\n    }\n\n\n## The variant picker\n\neditor-variant = Varian\neditor-variant-filter = Saring...\neditor-variant-next = Pilih varian berikutnya\neditor-variant-previous = Pilih varian sebelumnya\n\n\n## The accessibility status button\n\neditor-accessibility-title =\n    { $status ->\n        [violations] Pelanggaran aksesibilitas WCAG AA teridentifikasi. Klik untuk { $action ->\n            [close] menutup\n           *[open] membuka\n        } laporan aksesibilitas.\n        [advisories] Klik untuk { $action ->\n            [close] menutup\n           *[open] membuka\n        } laporan aksesibilitas. Tidak ditemukan pelanggaran WCAG AA, tetapi ada rekomendasi aksesibilitas tambahan.\n       *[clean] Klik untuk { $action ->\n            [close] menutup\n           *[open] membuka\n        } laporan aksesibilitas. Tidak ditemukan masalah aksesibilitas.\n    }\n\neditor-accessibility-label =\n    { $status ->\n        [violations] Pelanggaran aksesibilitas WCAG AA teridentifikasi. Ditemukan { $count } pelanggaran WCAG AA. Klik untuk { $action ->\n            [close] menutup\n           *[open] membuka\n        } laporan aksesibilitas.\n        [advisories] Tidak ada pelanggaran WCAG AA yang teridentifikasi. Ditemukan { $count } rekomendasi aksesibilitas tambahan. Klik untuk { $action ->\n            [close] menutup\n           *[open] membuka\n        } laporan aksesibilitas.\n       *[clean] Tidak ada pelanggaran WCAG AA yang teridentifikasi. Klik untuk { $action ->\n            [close] menutup\n           *[open] membuka\n        } laporan aksesibilitas.\n    }\n\neditor-accessibility-badge = WCAG\n\n\n## The footer\n\neditor-version-title = DoenetML versi { $version }\n\neditor-tab-help = Bantuan sesuai konteks\neditor-tab-help-short = Konteks\neditor-tab-errors = Kesalahan\neditor-tab-warnings = Peringatan\neditor-tab-info = Info\neditor-tab-accessibility = Aksesibilitas\neditor-tab-responses = Jawaban terkirim\n\neditor-tab-with-count = { $label }: { $count }\n\neditor-options = Opsi editor\neditor-format-as-doenetml = Format sebagai DoenetML\neditor-format-as-xml = Format sebagai XML\n\n\n## The diagnostics panel\n\neditor-diagnostic-line = Baris #{ $line }\n\neditor-no-errors = Tidak ada kesalahan\neditor-no-warnings = Tidak ada peringatan\neditor-no-info = Tidak ada diagnostik info\n\neditor-show-info-annotations = Tampilkan diagnostik info di editor\neditor-show-accessibility-annotations = Tampilkan diagnostik aksesibilitas di editor\n\neditor-accessibility-learn-more = Pelajari pendekatan Doenet terhadap aksesibilitas\n\neditor-accessibility-violations-heading = Pelanggaran aksesibilitas ({ $standard })\n\neditor-accessibility-other-heading = Masalah aksesibilitas lainnya\neditor-none-found = Tidak ditemukan\n\n\n## Submitted responses\n\neditor-no-responses = Belum ada jawaban yang dikirim\neditor-response-answer-id = Id jawaban\neditor-response-response = Jawaban\neditor-response-credit = Nilai\neditor-response-submitted = Dikirim\n\n\n## The context-help panel\n\nhelp-placeholder = Letakkan kursor pada nama tag, atribut, atau { $ref } untuk melihat dokumentasi.\n\nhelp-unsupported-ref-chain = Bantuan untuk referensi bertingkat seperti { $example } belum didukung.\n\nhelp-unresolved-ref =\n    { $reason ->\n        [notFound] Tidak ditemukan acuan untuk referensi: { $ref }.\n        [multiple] Ditemukan beberapa acuan untuk referensi: { $ref }.\n       *[indeterminate] Acuan untuk { $ref } tidak dapat ditentukan.\n    }\n\nhelp-learn-about-references = Pelajari tentang referensi →\nhelp-reference-page = Halaman rujukan →\n\nhelp-suggestions-header =\n    { $location ->\n        [inside] Di dalam { $element }\n       *[top] Di tingkat teratas\n    }{ $allowed ->\n        [none] { " — tidak ada yang bisa diletakkan di sini." }\n        [text] { " — ketik teks di sini." }\n        [text-and-components] { " — ketik teks di sini, atau coba:" }\n       *[components] { " — hal yang bisa dicoba:" }\n    }\n\nhelp-suggestions-footer = Tekan { $shortcut } untuk melihat semua { $total } komponen.\n\nhelp-name-summary = { $name } — { $summary }\n\nhelp-ref-is-reference =\n    { $line ->\n        [none] { $ref } adalah referensi ke { $target }.\n       *[other] { $ref } adalah referensi ke { $target } (baris { $line }).\n    }\n\nhelp-ref-derived-from =\n    { $line ->\n        [none] Diperkenalkan oleh { $owner } sebagai { $role }.\n       *[other] Diperkenalkan oleh { $owner } pada baris { $line } sebagai { $role }.\n    }\n\nhelp-property-is-reference =\n    { $line ->\n        [none] { $ref } adalah referensi ke properti { $property } dari { $element }.\n       *[other] { $ref } adalah referensi ke properti { $property } dari { $element } (baris { $line }).\n    }\n\nhelp-kind-attribute = atribut\nhelp-kind-snippet = cuplikan\nhelp-kind-array-entry = entri larik\n\nhelp-default = Bawaan:\nhelp-active-default = Bawaan yang berlaku:\n\nhelp-style-number-annotation = { " " }(styleNumber { $styleNumber })\n\nhelp-allowed-values =\n    { $perItem ->\n        [true] Nilai yang diizinkan (satu per item):\n       *[other] Nilai yang diizinkan:\n    }\n\nhelp-suggested-values = Nilai yang disarankan:\n\nhelp-inserts = Menyisipkan:\n\nhelp-coordinates = Koordinat:\n\nhelp-type = Tipe:\n\nhelp-resolved-style = Gaya hasil resolusi (styleNumber { $styleNumber }):\n\nhelp-resolved-function-names = Nama fungsi hasil resolusi:\nhelp-reset-list = Daftar setel ulang pada masukan ini:\nhelp-added-on-input = Ditambahkan pada masukan ini:\nhelp-removed-on-input = Dihapus pada masukan ini:\n\nhelp-reset-overrides = { $reset } menggantikan { $additional } dan { $removed }.\n';
+export {
+  editor as default
+};
+//# sourceMappingURL=editor-B4HbP_jI-B4HbP_jI.js.map

package/editor-B4HbP_jI-B4HbP_jI.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"editor-B4HbP_jI-B4HbP_jI.js","sources":["../../../i18n/dist/editor-B4HbP_jI.js"],"sourcesContent":["const editor = '# Indonesian editor and language-server surfaces. Translated from\\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\\n# key that does not exist there, and reports a key that exists there but not\\n# here as missing coverage.\\n#\\n# Message ids are never translated — only the text to the right of `=`.\\n#\\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\\n# Correct anything here freely; nothing in it was written by a translator.\\n#\\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\\n# name are identifiers, not prose, and stay as written.\\n#\\n# Indonesian has a single plural category, so a countable message needs no\\n# selection — `[other]` covers every count.\\n\\n\\n## The viewer\\'s controls\\n\\neditor-update-viewer =\\n    { $action ->\\n        [reset] Setel ulang\\n       *[update] Perbarui\\n    }\\n\\neditor-update-viewer-title =\\n    { $shortcut ->\\n        [none] { $word } penampil\\n       *[other] { $word } penampil { $shortcut }\\n    }\\n\\n\\n## The variant picker\\n\\neditor-variant = Varian\\neditor-variant-filter = Saring...\\neditor-variant-next = Pilih varian berikutnya\\neditor-variant-previous = Pilih varian sebelumnya\\n\\n\\n## The accessibility status button\\n\\neditor-accessibility-title =\\n    { $status ->\\n        [violations] Pelanggaran aksesibilitas WCAG AA teridentifikasi. Klik untuk { $action ->\\n            [close] menutup\\n           *[open] membuka\\n        } laporan aksesibilitas.\\n        [advisories] Klik untuk { $action ->\\n            [close] menutup\\n           *[open] membuka\\n        } laporan aksesibilitas. Tidak ditemukan pelanggaran WCAG AA, tetapi ada rekomendasi aksesibilitas tambahan.\\n       *[clean] Klik untuk { $action ->\\n            [close] menutup\\n           *[open] membuka\\n        } laporan aksesibilitas. Tidak ditemukan masalah aksesibilitas.\\n    }\\n\\neditor-accessibility-label =\\n    { $status ->\\n        [violations] Pelanggaran aksesibilitas WCAG AA teridentifikasi. Ditemukan { $count } pelanggaran WCAG AA. Klik untuk { $action ->\\n            [close] menutup\\n           *[open] membuka\\n        } laporan aksesibilitas.\\n        [advisories] Tidak ada pelanggaran WCAG AA yang teridentifikasi. Ditemukan { $count } rekomendasi aksesibilitas tambahan. Klik untuk { $action ->\\n            [close] menutup\\n           *[open] membuka\\n        } laporan aksesibilitas.\\n       *[clean] Tidak ada pelanggaran WCAG AA yang teridentifikasi. Klik untuk { $action ->\\n            [close] menutup\\n           *[open] membuka\\n        } laporan aksesibilitas.\\n    }\\n\\neditor-accessibility-badge = WCAG\\n\\n\\n## The footer\\n\\neditor-version-title = DoenetML versi { $version }\\n\\neditor-tab-help = Bantuan sesuai konteks\\neditor-tab-help-short = Konteks\\neditor-tab-errors = Kesalahan\\neditor-tab-warnings = Peringatan\\neditor-tab-info = Info\\neditor-tab-accessibility = Aksesibilitas\\neditor-tab-responses = Jawaban terkirim\\n\\neditor-tab-with-count = { $label }: { $count }\\n\\neditor-options = Opsi editor\\neditor-format-as-doenetml = Format sebagai DoenetML\\neditor-format-as-xml = Format sebagai XML\\n\\n\\n## The diagnostics panel\\n\\neditor-diagnostic-line = Baris #{ $line }\\n\\neditor-no-errors = Tidak ada kesalahan\\neditor-no-warnings = Tidak ada peringatan\\neditor-no-info = Tidak ada diagnostik info\\n\\neditor-show-info-annotations = Tampilkan diagnostik info di editor\\neditor-show-accessibility-annotations = Tampilkan diagnostik aksesibilitas di editor\\n\\neditor-accessibility-learn-more = Pelajari pendekatan Doenet terhadap aksesibilitas\\n\\neditor-accessibility-violations-heading = Pelanggaran aksesibilitas ({ $standard })\\n\\neditor-accessibility-other-heading = Masalah aksesibilitas lainnya\\neditor-none-found = Tidak ditemukan\\n\\n\\n## Submitted responses\\n\\neditor-no-responses = Belum ada jawaban yang dikirim\\neditor-response-answer-id = Id jawaban\\neditor-response-response = Jawaban\\neditor-response-credit = Nilai\\neditor-response-submitted = Dikirim\\n\\n\\n## The context-help panel\\n\\nhelp-placeholder = Letakkan kursor pada nama tag, atribut, atau { $ref } untuk melihat dokumentasi.\\n\\nhelp-unsupported-ref-chain = Bantuan untuk referensi bertingkat seperti { $example } belum didukung.\\n\\nhelp-unresolved-ref =\\n    { $reason ->\\n        [notFound] Tidak ditemukan acuan untuk referensi: { $ref }.\\n        [multiple] Ditemukan beberapa acuan untuk referensi: { $ref }.\\n       *[indeterminate] Acuan untuk { $ref } tidak dapat ditentukan.\\n    }\\n\\nhelp-learn-about-references = Pelajari tentang referensi →\\nhelp-reference-page = Halaman rujukan →\\n\\nhelp-suggestions-header =\\n    { $location ->\\n        [inside] Di dalam { $element }\\n       *[top] Di tingkat teratas\\n    }{ $allowed ->\\n        [none] { \" — tidak ada yang bisa diletakkan di sini.\" }\\n        [text] { \" — ketik teks di sini.\" }\\n        [text-and-components] { \" — ketik teks di sini, atau coba:\" }\\n       *[components] { \" — hal yang bisa dicoba:\" }\\n    }\\n\\nhelp-suggestions-footer = Tekan { $shortcut } untuk melihat semua { $total } komponen.\\n\\nhelp-name-summary = { $name } — { $summary }\\n\\nhelp-ref-is-reference =\\n    { $line ->\\n        [none] { $ref } adalah referensi ke { $target }.\\n       *[other] { $ref } adalah referensi ke { $target } (baris { $line }).\\n    }\\n\\nhelp-ref-derived-from =\\n    { $line ->\\n        [none] Diperkenalkan oleh { $owner } sebagai { $role }.\\n       *[other] Diperkenalkan oleh { $owner } pada baris { $line } sebagai { $role }.\\n    }\\n\\nhelp-property-is-reference =\\n    { $line ->\\n        [none] { $ref } adalah referensi ke properti { $property } dari { $element }.\\n       *[other] { $ref } adalah referensi ke properti { $property } dari { $element } (baris { $line }).\\n    }\\n\\nhelp-kind-attribute = atribut\\nhelp-kind-snippet = cuplikan\\nhelp-kind-array-entry = entri larik\\n\\nhelp-default = Bawaan:\\nhelp-active-default = Bawaan yang berlaku:\\n\\nhelp-style-number-annotation = { \" \" }(styleNumber { $styleNumber })\\n\\nhelp-allowed-values =\\n    { $perItem ->\\n        [true] Nilai yang diizinkan (satu per item):\\n       *[other] Nilai yang diizinkan:\\n    }\\n\\nhelp-suggested-values = Nilai yang disarankan:\\n\\nhelp-inserts = Menyisipkan:\\n\\nhelp-coordinates = Koordinat:\\n\\nhelp-type = Tipe:\\n\\nhelp-resolved-style = Gaya hasil resolusi (styleNumber { $styleNumber }):\\n\\nhelp-resolved-function-names = Nama fungsi hasil resolusi:\\nhelp-reset-list = Daftar setel ulang pada masukan ini:\\nhelp-added-on-input = Ditambahkan pada masukan ini:\\nhelp-removed-on-input = Dihapus pada masukan ini:\\n\\nhelp-reset-overrides = { $reset } menggantikan { $additional } dan { $removed }.\\n';\nexport {\n  editor as default\n};\n//# sourceMappingURL=editor-B4HbP_jI.js.map\n"],"names":[],"mappings":"AAAK,MAAC,SAAS;"}

package/editor-B6-NJBVs-B6-NJBVs.js

@@ -0,0 +1,5 @@
+const editor = '# Hmong Njua editor and language-server surfaces. Translated from\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\n# key that does not exist there, and reports a key that exists there but not\n# here as missing coverage.\n#\n# Message ids are never translated — only the text to the right of `=`.\n#\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\n# Correct anything here freely; nothing in it was written by a translator.\n#\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\n# name are identifiers, not prose, and stay as written.\n#\n# Hmong does not inflect for number, so a countable message needs no selection.\n\n\n## The viewer\'s controls\n\neditor-update-viewer =\n    { $action ->\n        [reset] Rov pib dua\n       *[update] Hloov kho\n    }\n\neditor-update-viewer-title =\n    { $shortcut ->\n        [none] { $word } qhov saib\n       *[other] { $word } qhov saib { $shortcut }\n    }\n\n\n## The variant picker\n\neditor-variant = Hom\neditor-variant-filter = Lim...\neditor-variant-next = Xaiv hom tom ntej\neditor-variant-previous = Xaiv hom yav tas\n\n\n## The accessibility status button\n\neditor-accessibility-title =\n    { $status ->\n        [violations] Pom kev ua txhaum WCAG AA txog kev nkag tau. Nias los { $action ->\n            [close] kaw\n           *[open] qhib\n        } daim ntawv qhia txog kev nkag tau.\n        [advisories] Nias los { $action ->\n            [close] kaw\n           *[open] qhib\n        } daim ntawv qhia txog kev nkag tau. Tsis pom kev ua txhaum WCAG AA, tiam sis muaj lwm cov lus taw qhia txog kev nkag tau.\n       *[clean] Nias los { $action ->\n            [close] kaw\n           *[open] qhib\n        } daim ntawv qhia txog kev nkag tau. Tsis pom teeb meem txog kev nkag tau.\n    }\n\neditor-accessibility-label =\n    { $status ->\n        [violations] Pom kev ua txhaum WCAG AA txog kev nkag tau. Pom { $count } qhov ua txhaum WCAG AA. Nias los { $action ->\n            [close] kaw\n           *[open] qhib\n        } daim ntawv qhia txog kev nkag tau.\n        [advisories] Tsis pom kev ua txhaum WCAG AA. Pom { $count } lo lus taw qhia ntxiv txog kev nkag tau. Nias los { $action ->\n            [close] kaw\n           *[open] qhib\n        } daim ntawv qhia txog kev nkag tau.\n       *[clean] Tsis pom kev ua txhaum WCAG AA. Nias los { $action ->\n            [close] kaw\n           *[open] qhib\n        } daim ntawv qhia txog kev nkag tau.\n    }\n\neditor-accessibility-badge = WCAG\n\n\n## The footer\n\neditor-version-title = DoenetML tus lej { $version }\n\neditor-tab-help = Kev pab raws li qhov chaw\neditor-tab-help-short = Qhov chaw\neditor-tab-errors = Kev yuam kev\neditor-tab-warnings = Ceeb toom\neditor-tab-info = Lus qhia\neditor-tab-accessibility = Kev nkag tau\neditor-tab-responses = Cov lus teb xa lawm\n\neditor-tab-with-count = { $label }: { $count }\n\neditor-options = Cov kev xaiv rau tus kws kho\neditor-format-as-doenetml = Ua raws DoenetML\neditor-format-as-xml = Ua raws XML\n\n\n## The diagnostics panel\n\neditor-diagnostic-line = Kab { $line }\n\neditor-no-errors = Tsis muaj kev yuam kev\neditor-no-warnings = Tsis muaj ceeb toom\neditor-no-info = Tsis muaj lus qhia\n\neditor-show-info-annotations = Qhia cov lus qhia hauv tus kws kho\neditor-show-accessibility-annotations = Qhia cov lus txog kev nkag tau hauv tus kws kho\n\neditor-accessibility-learn-more = Kawm txog Doenet txoj kev saib xyuas kev nkag tau\n\neditor-accessibility-violations-heading = Kev ua txhaum txog kev nkag tau ({ $standard })\n\neditor-accessibility-other-heading = Lwm cov teeb meem txog kev nkag tau\neditor-none-found = Tsis pom ib qho\n\n\n## Submitted responses\n\neditor-no-responses = Tsis tau muaj cov lus teb xa\neditor-response-answer-id = Lus teb Id\neditor-response-response = Lus teb\neditor-response-credit = Cov ntsiab\neditor-response-submitted = Xa lawm\n\n\n## The context-help panel\n\nhelp-placeholder = Muab tus cursor tso rau saum lub npe tag, sifo, los yog { $ref } kom pom cov ntaub ntawv qhia.\n\nhelp-unsupported-ref-chain = Tseem tsis tau muaj kev pab rau cov tswv yim ntau feem li { $example }.\n\nhelp-unresolved-ref =\n    { $reason ->\n        [notFound] Tsis pom qhov uas hais txog rau: { $ref }.\n        [multiple] Pom ntau qhov uas hais txog rau: { $ref }.\n       *[indeterminate] Tsis tau paub qhov uas { $ref } hais txog.\n    }\n\nhelp-learn-about-references = Kawm ntxiv txog cov tswv yim →\nhelp-reference-page = Nplooj ntawv qhia →\n\nhelp-suggestions-header =\n    { $location ->\n        [inside] Hauv { $element }\n       *[top] Nyob saum toj kawg nkaus\n    }{ $allowed ->\n        [none] { " — tsis muaj dab tsi mus rau ntawm no." }\n        [text] { " — sau ntawv rau ntawm no." }\n        [text-and-components] { " — sau ntawv rau ntawm no, los yog sim:" }\n       *[components] { " — sim cov no:" }\n    }\n\nhelp-suggestions-footer = Nias { $shortcut } kom pom tag nrho { $total } feem.\n\nhelp-name-summary = { $name } — { $summary }\n\nhelp-ref-is-reference =\n    { $line ->\n        [none] { $ref } yog ib qho hais txog { $target }.\n       *[other] { $ref } yog ib qho hais txog { $target } (kab { $line }).\n    }\n\nhelp-ref-derived-from =\n    { $line ->\n        [none] { $owner } tau coj los ua { $role }.\n       *[other] { $owner } tau coj los ntawm kab { $line } ua { $role }.\n    }\n\nhelp-property-is-reference =\n    { $line ->\n        [none] { $ref } yog ib qho hais txog { $element } qhov { $property }.\n       *[other] { $ref } yog ib qho hais txog { $element } qhov { $property } (kab { $line }).\n    }\n\nhelp-kind-attribute = sifo\nhelp-kind-snippet = ib nrab ntawv\nhelp-kind-array-entry = ib qho hauv cov npe\n\nhelp-default = Tus nqi ib txwm:\nhelp-active-default = Tus nqi ib txwm siv:\n\nhelp-style-number-annotation = { " " }(styleNumber { $styleNumber })\n\nhelp-allowed-values =\n    { $perItem ->\n        [true] Cov nqi tso cai (ib qho rau ib yam):\n       *[other] Cov nqi tso cai:\n    }\n\nhelp-suggested-values = Cov nqi taw qhia:\n\nhelp-inserts = Ntxiv:\n\nhelp-coordinates = Cov taw qhia chaw:\n\nhelp-type = Hom:\n\nhelp-resolved-style = Tus qauv teev tseg (styleNumber { $styleNumber }):\n\nhelp-resolved-function-names = Cov npe haujlwm teev tseg:\nhelp-reset-list = Cov npe rov pib dua ntawm qhov no:\nhelp-added-on-input = Ntxiv rau ntawm qhov no:\nhelp-removed-on-input = Tshem tawm ntawm qhov no:\n\nhelp-reset-overrides = { $reset } hla { $additional } thiab { $removed }.\n';
+export {
+  editor as default
+};
+//# sourceMappingURL=editor-B6-NJBVs-B6-NJBVs.js.map

package/editor-B6-NJBVs-B6-NJBVs.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"editor-B6-NJBVs-B6-NJBVs.js","sources":["../../../i18n/dist/editor-B6-NJBVs.js"],"sourcesContent":["const editor = '# Hmong Njua editor and language-server surfaces. Translated from\\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\\n# key that does not exist there, and reports a key that exists there but not\\n# here as missing coverage.\\n#\\n# Message ids are never translated — only the text to the right of `=`.\\n#\\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\\n# Correct anything here freely; nothing in it was written by a translator.\\n#\\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\\n# name are identifiers, not prose, and stay as written.\\n#\\n# Hmong does not inflect for number, so a countable message needs no selection.\\n\\n\\n## The viewer\\'s controls\\n\\neditor-update-viewer =\\n    { $action ->\\n        [reset] Rov pib dua\\n       *[update] Hloov kho\\n    }\\n\\neditor-update-viewer-title =\\n    { $shortcut ->\\n        [none] { $word } qhov saib\\n       *[other] { $word } qhov saib { $shortcut }\\n    }\\n\\n\\n## The variant picker\\n\\neditor-variant = Hom\\neditor-variant-filter = Lim...\\neditor-variant-next = Xaiv hom tom ntej\\neditor-variant-previous = Xaiv hom yav tas\\n\\n\\n## The accessibility status button\\n\\neditor-accessibility-title =\\n    { $status ->\\n        [violations] Pom kev ua txhaum WCAG AA txog kev nkag tau. Nias los { $action ->\\n            [close] kaw\\n           *[open] qhib\\n        } daim ntawv qhia txog kev nkag tau.\\n        [advisories] Nias los { $action ->\\n            [close] kaw\\n           *[open] qhib\\n        } daim ntawv qhia txog kev nkag tau. Tsis pom kev ua txhaum WCAG AA, tiam sis muaj lwm cov lus taw qhia txog kev nkag tau.\\n       *[clean] Nias los { $action ->\\n            [close] kaw\\n           *[open] qhib\\n        } daim ntawv qhia txog kev nkag tau. Tsis pom teeb meem txog kev nkag tau.\\n    }\\n\\neditor-accessibility-label =\\n    { $status ->\\n        [violations] Pom kev ua txhaum WCAG AA txog kev nkag tau. Pom { $count } qhov ua txhaum WCAG AA. Nias los { $action ->\\n            [close] kaw\\n           *[open] qhib\\n        } daim ntawv qhia txog kev nkag tau.\\n        [advisories] Tsis pom kev ua txhaum WCAG AA. Pom { $count } lo lus taw qhia ntxiv txog kev nkag tau. Nias los { $action ->\\n            [close] kaw\\n           *[open] qhib\\n        } daim ntawv qhia txog kev nkag tau.\\n       *[clean] Tsis pom kev ua txhaum WCAG AA. Nias los { $action ->\\n            [close] kaw\\n           *[open] qhib\\n        } daim ntawv qhia txog kev nkag tau.\\n    }\\n\\neditor-accessibility-badge = WCAG\\n\\n\\n## The footer\\n\\neditor-version-title = DoenetML tus lej { $version }\\n\\neditor-tab-help = Kev pab raws li qhov chaw\\neditor-tab-help-short = Qhov chaw\\neditor-tab-errors = Kev yuam kev\\neditor-tab-warnings = Ceeb toom\\neditor-tab-info = Lus qhia\\neditor-tab-accessibility = Kev nkag tau\\neditor-tab-responses = Cov lus teb xa lawm\\n\\neditor-tab-with-count = { $label }: { $count }\\n\\neditor-options = Cov kev xaiv rau tus kws kho\\neditor-format-as-doenetml = Ua raws DoenetML\\neditor-format-as-xml = Ua raws XML\\n\\n\\n## The diagnostics panel\\n\\neditor-diagnostic-line = Kab { $line }\\n\\neditor-no-errors = Tsis muaj kev yuam kev\\neditor-no-warnings = Tsis muaj ceeb toom\\neditor-no-info = Tsis muaj lus qhia\\n\\neditor-show-info-annotations = Qhia cov lus qhia hauv tus kws kho\\neditor-show-accessibility-annotations = Qhia cov lus txog kev nkag tau hauv tus kws kho\\n\\neditor-accessibility-learn-more = Kawm txog Doenet txoj kev saib xyuas kev nkag tau\\n\\neditor-accessibility-violations-heading = Kev ua txhaum txog kev nkag tau ({ $standard })\\n\\neditor-accessibility-other-heading = Lwm cov teeb meem txog kev nkag tau\\neditor-none-found = Tsis pom ib qho\\n\\n\\n## Submitted responses\\n\\neditor-no-responses = Tsis tau muaj cov lus teb xa\\neditor-response-answer-id = Lus teb Id\\neditor-response-response = Lus teb\\neditor-response-credit = Cov ntsiab\\neditor-response-submitted = Xa lawm\\n\\n\\n## The context-help panel\\n\\nhelp-placeholder = Muab tus cursor tso rau saum lub npe tag, sifo, los yog { $ref } kom pom cov ntaub ntawv qhia.\\n\\nhelp-unsupported-ref-chain = Tseem tsis tau muaj kev pab rau cov tswv yim ntau feem li { $example }.\\n\\nhelp-unresolved-ref =\\n    { $reason ->\\n        [notFound] Tsis pom qhov uas hais txog rau: { $ref }.\\n        [multiple] Pom ntau qhov uas hais txog rau: { $ref }.\\n       *[indeterminate] Tsis tau paub qhov uas { $ref } hais txog.\\n    }\\n\\nhelp-learn-about-references = Kawm ntxiv txog cov tswv yim →\\nhelp-reference-page = Nplooj ntawv qhia →\\n\\nhelp-suggestions-header =\\n    { $location ->\\n        [inside] Hauv { $element }\\n       *[top] Nyob saum toj kawg nkaus\\n    }{ $allowed ->\\n        [none] { \" — tsis muaj dab tsi mus rau ntawm no.\" }\\n        [text] { \" — sau ntawv rau ntawm no.\" }\\n        [text-and-components] { \" — sau ntawv rau ntawm no, los yog sim:\" }\\n       *[components] { \" — sim cov no:\" }\\n    }\\n\\nhelp-suggestions-footer = Nias { $shortcut } kom pom tag nrho { $total } feem.\\n\\nhelp-name-summary = { $name } — { $summary }\\n\\nhelp-ref-is-reference =\\n    { $line ->\\n        [none] { $ref } yog ib qho hais txog { $target }.\\n       *[other] { $ref } yog ib qho hais txog { $target } (kab { $line }).\\n    }\\n\\nhelp-ref-derived-from =\\n    { $line ->\\n        [none] { $owner } tau coj los ua { $role }.\\n       *[other] { $owner } tau coj los ntawm kab { $line } ua { $role }.\\n    }\\n\\nhelp-property-is-reference =\\n    { $line ->\\n        [none] { $ref } yog ib qho hais txog { $element } qhov { $property }.\\n       *[other] { $ref } yog ib qho hais txog { $element } qhov { $property } (kab { $line }).\\n    }\\n\\nhelp-kind-attribute = sifo\\nhelp-kind-snippet = ib nrab ntawv\\nhelp-kind-array-entry = ib qho hauv cov npe\\n\\nhelp-default = Tus nqi ib txwm:\\nhelp-active-default = Tus nqi ib txwm siv:\\n\\nhelp-style-number-annotation = { \" \" }(styleNumber { $styleNumber })\\n\\nhelp-allowed-values =\\n    { $perItem ->\\n        [true] Cov nqi tso cai (ib qho rau ib yam):\\n       *[other] Cov nqi tso cai:\\n    }\\n\\nhelp-suggested-values = Cov nqi taw qhia:\\n\\nhelp-inserts = Ntxiv:\\n\\nhelp-coordinates = Cov taw qhia chaw:\\n\\nhelp-type = Hom:\\n\\nhelp-resolved-style = Tus qauv teev tseg (styleNumber { $styleNumber }):\\n\\nhelp-resolved-function-names = Cov npe haujlwm teev tseg:\\nhelp-reset-list = Cov npe rov pib dua ntawm qhov no:\\nhelp-added-on-input = Ntxiv rau ntawm qhov no:\\nhelp-removed-on-input = Tshem tawm ntawm qhov no:\\n\\nhelp-reset-overrides = { $reset } hla { $additional } thiab { $removed }.\\n';\nexport {\n  editor as default\n};\n//# sourceMappingURL=editor-B6-NJBVs.js.map\n"],"names":[],"mappings":"AAAK,MAAC,SAAS;"}

package/editor-BBgnmbaC-BBgnmbaC.js

@@ -0,0 +1,5 @@
+const editor = '# Vietnamese editor and language-server surfaces. Translated from\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\n# key that does not exist there, and reports a key that exists there but not\n# here as missing coverage.\n#\n# Message ids are never translated — only the text to the right of `=`.\n#\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\n# Correct anything here freely; nothing in it was written by a translator.\n#\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\n# name are identifiers, not prose, and stay as written.\n#\n# Vietnamese has a single plural category, so a countable message needs no\n# selection — `[other]` covers every count.\n\n\n## The viewer\'s controls\n\neditor-update-viewer =\n    { $action ->\n        [reset] Đặt lại\n       *[update] Cập nhật\n    }\n\neditor-update-viewer-title =\n    { $shortcut ->\n        [none] { $word } trình xem\n       *[other] { $word } trình xem { $shortcut }\n    }\n\n\n## The variant picker\n\neditor-variant = Biến thể\neditor-variant-filter = Lọc...\neditor-variant-next = Chọn biến thể tiếp theo\neditor-variant-previous = Chọn biến thể trước đó\n\n\n## The accessibility status button\n\neditor-accessibility-title =\n    { $status ->\n        [violations] Đã phát hiện vi phạm khả năng tiếp cận WCAG AA. Nhấn để { $action ->\n            [close] đóng\n           *[open] mở\n        } báo cáo khả năng tiếp cận.\n        [advisories] Nhấn để { $action ->\n            [close] đóng\n           *[open] mở\n        } báo cáo khả năng tiếp cận. Không có vi phạm WCAG AA nào, nhưng có thêm khuyến nghị về khả năng tiếp cận.\n       *[clean] Nhấn để { $action ->\n            [close] đóng\n           *[open] mở\n        } báo cáo khả năng tiếp cận. Không tìm thấy vấn đề nào về khả năng tiếp cận.\n    }\n\neditor-accessibility-label =\n    { $status ->\n        [violations] Đã phát hiện vi phạm khả năng tiếp cận WCAG AA. Tìm thấy { $count } vi phạm WCAG AA. Nhấn để { $action ->\n            [close] đóng\n           *[open] mở\n        } báo cáo khả năng tiếp cận.\n        [advisories] Không có vi phạm WCAG AA nào. Tìm thấy { $count } khuyến nghị bổ sung về khả năng tiếp cận. Nhấn để { $action ->\n            [close] đóng\n           *[open] mở\n        } báo cáo khả năng tiếp cận.\n       *[clean] Không có vi phạm WCAG AA nào. Nhấn để { $action ->\n            [close] đóng\n           *[open] mở\n        } báo cáo khả năng tiếp cận.\n    }\n\neditor-accessibility-badge = WCAG\n\n\n## The footer\n\neditor-version-title = DoenetML phiên bản { $version }\n\neditor-tab-help = Trợ giúp theo ngữ cảnh\neditor-tab-help-short = Ngữ cảnh\neditor-tab-errors = Lỗi\neditor-tab-warnings = Cảnh báo\neditor-tab-info = Thông tin\neditor-tab-accessibility = Khả năng tiếp cận\neditor-tab-responses = Câu trả lời đã gửi\n\neditor-tab-with-count = { $label }: { $count }\n\neditor-options = Tùy chọn trình soạn thảo\neditor-format-as-doenetml = Định dạng theo DoenetML\neditor-format-as-xml = Định dạng theo XML\n\n\n## The diagnostics panel\n\neditor-diagnostic-line = Dòng #{ $line }\n\neditor-no-errors = Không có lỗi\neditor-no-warnings = Không có cảnh báo\neditor-no-info = Không có chẩn đoán thông tin\n\neditor-show-info-annotations = Hiện chẩn đoán thông tin trong trình soạn thảo\neditor-show-accessibility-annotations = Hiện chẩn đoán khả năng tiếp cận trong trình soạn thảo\n\neditor-accessibility-learn-more = Tìm hiểu quan điểm của Doenet về khả năng tiếp cận\n\neditor-accessibility-violations-heading = Vi phạm khả năng tiếp cận ({ $standard })\n\neditor-accessibility-other-heading = Các vấn đề khác về khả năng tiếp cận\neditor-none-found = Không tìm thấy mục nào\n\n\n## Submitted responses\n\neditor-no-responses = Chưa có câu trả lời nào được gửi\neditor-response-answer-id = Id câu trả lời\neditor-response-response = Câu trả lời\neditor-response-credit = Điểm\neditor-response-submitted = Đã gửi\n\n\n## The context-help panel\n\nhelp-placeholder = Đặt con trỏ lên tên thẻ, thuộc tính hoặc { $ref } để xem tài liệu.\n\nhelp-unsupported-ref-chain = Chưa hỗ trợ trợ giúp cho tham chiếu nhiều phần như { $example }.\n\nhelp-unresolved-ref =\n    { $reason ->\n        [notFound] Không tìm thấy đối tượng cho tham chiếu: { $ref }.\n        [multiple] Tìm thấy nhiều đối tượng cho tham chiếu: { $ref }.\n       *[indeterminate] Không xác định được đối tượng cho { $ref }.\n    }\n\nhelp-learn-about-references = Tìm hiểu về tham chiếu →\nhelp-reference-page = Trang tham khảo →\n\nhelp-suggestions-header =\n    { $location ->\n        [inside] Bên trong { $element }\n       *[top] Ở cấp cao nhất\n    }{ $allowed ->\n        [none] { " — không đặt được gì ở đây." }\n        [text] { " — có thể nhập văn bản ở đây." }\n        [text-and-components] { " — có thể nhập văn bản ở đây, hoặc thử:" }\n       *[components] { " — có thể thử:" }\n    }\n\nhelp-suggestions-footer = Nhấn { $shortcut } để xem tất cả { $total } thành phần.\n\nhelp-name-summary = { $name } — { $summary }\n\nhelp-ref-is-reference =\n    { $line ->\n        [none] { $ref } là tham chiếu đến { $target }.\n       *[other] { $ref } là tham chiếu đến { $target } (dòng { $line }).\n    }\n\nhelp-ref-derived-from =\n    { $line ->\n        [none] Được { $owner } đưa vào với vai trò { $role }.\n       *[other] Được { $owner } đưa vào ở dòng { $line } với vai trò { $role }.\n    }\n\nhelp-property-is-reference =\n    { $line ->\n        [none] { $ref } là tham chiếu đến thuộc tính { $property } của { $element }.\n       *[other] { $ref } là tham chiếu đến thuộc tính { $property } của { $element } (dòng { $line }).\n    }\n\nhelp-kind-attribute = thuộc tính\nhelp-kind-snippet = đoạn mã\nhelp-kind-array-entry = phần tử mảng\n\nhelp-default = Mặc định:\nhelp-active-default = Mặc định đang áp dụng:\n\nhelp-style-number-annotation = { " " }(styleNumber { $styleNumber })\n\nhelp-allowed-values =\n    { $perItem ->\n        [true] Giá trị cho phép (mỗi mục một giá trị):\n       *[other] Giá trị cho phép:\n    }\n\nhelp-suggested-values = Giá trị gợi ý:\n\nhelp-inserts = Chèn:\n\nhelp-coordinates = Tọa độ:\n\nhelp-type = Kiểu:\n\nhelp-resolved-style = Kiểu đã phân giải (styleNumber { $styleNumber }):\n\nhelp-resolved-function-names = Tên hàm đã phân giải:\nhelp-reset-list = Danh sách đặt lại cho đầu vào này:\nhelp-added-on-input = Được thêm vào đầu vào này:\nhelp-removed-on-input = Được loại khỏi đầu vào này:\n\nhelp-reset-overrides = { $reset } được ưu tiên hơn { $additional } và { $removed }.\n';
+export {
+  editor as default
+};
+//# sourceMappingURL=editor-BBgnmbaC-BBgnmbaC.js.map

package/editor-BBgnmbaC-BBgnmbaC.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"editor-BBgnmbaC-BBgnmbaC.js","sources":["../../../i18n/dist/editor-BBgnmbaC.js"],"sourcesContent":["const editor = '# Vietnamese editor and language-server surfaces. Translated from\\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\\n# key that does not exist there, and reports a key that exists there but not\\n# here as missing coverage.\\n#\\n# Message ids are never translated — only the text to the right of `=`.\\n#\\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\\n# Correct anything here freely; nothing in it was written by a translator.\\n#\\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\\n# name are identifiers, not prose, and stay as written.\\n#\\n# Vietnamese has a single plural category, so a countable message needs no\\n# selection — `[other]` covers every count.\\n\\n\\n## The viewer\\'s controls\\n\\neditor-update-viewer =\\n    { $action ->\\n        [reset] Đặt lại\\n       *[update] Cập nhật\\n    }\\n\\neditor-update-viewer-title =\\n    { $shortcut ->\\n        [none] { $word } trình xem\\n       *[other] { $word } trình xem { $shortcut }\\n    }\\n\\n\\n## The variant picker\\n\\neditor-variant = Biến thể\\neditor-variant-filter = Lọc...\\neditor-variant-next = Chọn biến thể tiếp theo\\neditor-variant-previous = Chọn biến thể trước đó\\n\\n\\n## The accessibility status button\\n\\neditor-accessibility-title =\\n    { $status ->\\n        [violations] Đã phát hiện vi phạm khả năng tiếp cận WCAG AA. Nhấn để { $action ->\\n            [close] đóng\\n           *[open] mở\\n        } báo cáo khả năng tiếp cận.\\n        [advisories] Nhấn để { $action ->\\n            [close] đóng\\n           *[open] mở\\n        } báo cáo khả năng tiếp cận. Không có vi phạm WCAG AA nào, nhưng có thêm khuyến nghị về khả năng tiếp cận.\\n       *[clean] Nhấn để { $action ->\\n            [close] đóng\\n           *[open] mở\\n        } báo cáo khả năng tiếp cận. Không tìm thấy vấn đề nào về khả năng tiếp cận.\\n    }\\n\\neditor-accessibility-label =\\n    { $status ->\\n        [violations] Đã phát hiện vi phạm khả năng tiếp cận WCAG AA. Tìm thấy { $count } vi phạm WCAG AA. Nhấn để { $action ->\\n            [close] đóng\\n           *[open] mở\\n        } báo cáo khả năng tiếp cận.\\n        [advisories] Không có vi phạm WCAG AA nào. Tìm thấy { $count } khuyến nghị bổ sung về khả năng tiếp cận. Nhấn để { $action ->\\n            [close] đóng\\n           *[open] mở\\n        } báo cáo khả năng tiếp cận.\\n       *[clean] Không có vi phạm WCAG AA nào. Nhấn để { $action ->\\n            [close] đóng\\n           *[open] mở\\n        } báo cáo khả năng tiếp cận.\\n    }\\n\\neditor-accessibility-badge = WCAG\\n\\n\\n## The footer\\n\\neditor-version-title = DoenetML phiên bản { $version }\\n\\neditor-tab-help = Trợ giúp theo ngữ cảnh\\neditor-tab-help-short = Ngữ cảnh\\neditor-tab-errors = Lỗi\\neditor-tab-warnings = Cảnh báo\\neditor-tab-info = Thông tin\\neditor-tab-accessibility = Khả năng tiếp cận\\neditor-tab-responses = Câu trả lời đã gửi\\n\\neditor-tab-with-count = { $label }: { $count }\\n\\neditor-options = Tùy chọn trình soạn thảo\\neditor-format-as-doenetml = Định dạng theo DoenetML\\neditor-format-as-xml = Định dạng theo XML\\n\\n\\n## The diagnostics panel\\n\\neditor-diagnostic-line = Dòng #{ $line }\\n\\neditor-no-errors = Không có lỗi\\neditor-no-warnings = Không có cảnh báo\\neditor-no-info = Không có chẩn đoán thông tin\\n\\neditor-show-info-annotations = Hiện chẩn đoán thông tin trong trình soạn thảo\\neditor-show-accessibility-annotations = Hiện chẩn đoán khả năng tiếp cận trong trình soạn thảo\\n\\neditor-accessibility-learn-more = Tìm hiểu quan điểm của Doenet về khả năng tiếp cận\\n\\neditor-accessibility-violations-heading = Vi phạm khả năng tiếp cận ({ $standard })\\n\\neditor-accessibility-other-heading = Các vấn đề khác về khả năng tiếp cận\\neditor-none-found = Không tìm thấy mục nào\\n\\n\\n## Submitted responses\\n\\neditor-no-responses = Chưa có câu trả lời nào được gửi\\neditor-response-answer-id = Id câu trả lời\\neditor-response-response = Câu trả lời\\neditor-response-credit = Điểm\\neditor-response-submitted = Đã gửi\\n\\n\\n## The context-help panel\\n\\nhelp-placeholder = Đặt con trỏ lên tên thẻ, thuộc tính hoặc { $ref } để xem tài liệu.\\n\\nhelp-unsupported-ref-chain = Chưa hỗ trợ trợ giúp cho tham chiếu nhiều phần như { $example }.\\n\\nhelp-unresolved-ref =\\n    { $reason ->\\n        [notFound] Không tìm thấy đối tượng cho tham chiếu: { $ref }.\\n        [multiple] Tìm thấy nhiều đối tượng cho tham chiếu: { $ref }.\\n       *[indeterminate] Không xác định được đối tượng cho { $ref }.\\n    }\\n\\nhelp-learn-about-references = Tìm hiểu về tham chiếu →\\nhelp-reference-page = Trang tham khảo →\\n\\nhelp-suggestions-header =\\n    { $location ->\\n        [inside] Bên trong { $element }\\n       *[top] Ở cấp cao nhất\\n    }{ $allowed ->\\n        [none] { \" — không đặt được gì ở đây.\" }\\n        [text] { \" — có thể nhập văn bản ở đây.\" }\\n        [text-and-components] { \" — có thể nhập văn bản ở đây, hoặc thử:\" }\\n       *[components] { \" — có thể thử:\" }\\n    }\\n\\nhelp-suggestions-footer = Nhấn { $shortcut } để xem tất cả { $total } thành phần.\\n\\nhelp-name-summary = { $name } — { $summary }\\n\\nhelp-ref-is-reference =\\n    { $line ->\\n        [none] { $ref } là tham chiếu đến { $target }.\\n       *[other] { $ref } là tham chiếu đến { $target } (dòng { $line }).\\n    }\\n\\nhelp-ref-derived-from =\\n    { $line ->\\n        [none] Được { $owner } đưa vào với vai trò { $role }.\\n       *[other] Được { $owner } đưa vào ở dòng { $line } với vai trò { $role }.\\n    }\\n\\nhelp-property-is-reference =\\n    { $line ->\\n        [none] { $ref } là tham chiếu đến thuộc tính { $property } của { $element }.\\n       *[other] { $ref } là tham chiếu đến thuộc tính { $property } của { $element } (dòng { $line }).\\n    }\\n\\nhelp-kind-attribute = thuộc tính\\nhelp-kind-snippet = đoạn mã\\nhelp-kind-array-entry = phần tử mảng\\n\\nhelp-default = Mặc định:\\nhelp-active-default = Mặc định đang áp dụng:\\n\\nhelp-style-number-annotation = { \" \" }(styleNumber { $styleNumber })\\n\\nhelp-allowed-values =\\n    { $perItem ->\\n        [true] Giá trị cho phép (mỗi mục một giá trị):\\n       *[other] Giá trị cho phép:\\n    }\\n\\nhelp-suggested-values = Giá trị gợi ý:\\n\\nhelp-inserts = Chèn:\\n\\nhelp-coordinates = Tọa độ:\\n\\nhelp-type = Kiểu:\\n\\nhelp-resolved-style = Kiểu đã phân giải (styleNumber { $styleNumber }):\\n\\nhelp-resolved-function-names = Tên hàm đã phân giải:\\nhelp-reset-list = Danh sách đặt lại cho đầu vào này:\\nhelp-added-on-input = Được thêm vào đầu vào này:\\nhelp-removed-on-input = Được loại khỏi đầu vào này:\\n\\nhelp-reset-overrides = { $reset } được ưu tiên hơn { $additional } và { $removed }.\\n';\nexport {\n  editor as default\n};\n//# sourceMappingURL=editor-BBgnmbaC.js.map\n"],"names":[],"mappings":"AAAK,MAAC,SAAS;"}

package/editor-BWnT0YSR-BWnT0YSR.js

@@ -0,0 +1,5 @@
+const editor = '# Korean editor and language-server surfaces. Translated from\n# `locales/en/editor.ftl`, which is the source of truth: `lint:i18n` rejects a\n# key that does not exist there, and reports a key that exists there but not\n# here as missing coverage.\n#\n# Message ids are never translated — only the text to the right of `=`.\n#\n# UNREVIEWED SEED. Machine-generated, pending review by a speaker (#1521).\n# Correct anything here freely; nothing in it was written by a translator.\n#\n# `WCAG AA`, `DoenetML`, `XML`, `styleNumber` and every attribute or element\n# name are identifiers, not prose, and stay as written.\n#\n# Korean has a single plural category, so a countable message needs no\n# selection — `[other]` covers every count.\n\n\n## The viewer\'s controls\n\neditor-update-viewer =\n    { $action ->\n        [reset] 초기화\n       *[update] 갱신\n    }\n\neditor-update-viewer-title =\n    { $shortcut ->\n        [none] 뷰어 { $word }\n       *[other] 뷰어 { $word } { $shortcut }\n    }\n\n\n## The variant picker\n\neditor-variant = 변형\neditor-variant-filter = 필터...\neditor-variant-next = 다음 변형 선택\neditor-variant-previous = 이전 변형 선택\n\n\n## The accessibility status button\n\neditor-accessibility-title =\n    { $status ->\n        [violations] WCAG AA 접근성 위반이 발견되었습니다. 클릭하면 접근성 보고서를 { $action ->\n            [close] 닫습니다\n           *[open] 엽니다\n        }.\n        [advisories] 클릭하면 접근성 보고서를 { $action ->\n            [close] 닫습니다\n           *[open] 엽니다\n        }. WCAG AA 위반은 없지만 추가 접근성 권장 사항이 있습니다.\n       *[clean] 클릭하면 접근성 보고서를 { $action ->\n            [close] 닫습니다\n           *[open] 엽니다\n        }. 접근성 문제가 발견되지 않았습니다.\n    }\n\neditor-accessibility-label =\n    { $status ->\n        [violations] WCAG AA 접근성 위반이 발견되었습니다. WCAG AA 위반 { $count }건이 발견되었습니다. 클릭하면 접근성 보고서를 { $action ->\n            [close] 닫습니다\n           *[open] 엽니다\n        }.\n        [advisories] WCAG AA 위반은 발견되지 않았습니다. 추가 접근성 권장 사항 { $count }건이 발견되었습니다. 클릭하면 접근성 보고서를 { $action ->\n            [close] 닫습니다\n           *[open] 엽니다\n        }.\n       *[clean] WCAG AA 위반은 발견되지 않았습니다. 클릭하면 접근성 보고서를 { $action ->\n            [close] 닫습니다\n           *[open] 엽니다\n        }.\n    }\n\neditor-accessibility-badge = WCAG\n\n\n## The footer\n\neditor-version-title = DoenetML 버전 { $version }\n\neditor-tab-help = 상황별 도움말\neditor-tab-help-short = 상황\neditor-tab-errors = 오류\neditor-tab-warnings = 경고\neditor-tab-info = 정보\neditor-tab-accessibility = 접근성\neditor-tab-responses = 제출된 답안\n\neditor-tab-with-count = { $label }: { $count }\n\neditor-options = 편집기 옵션\neditor-format-as-doenetml = DoenetML 형식으로 정리\neditor-format-as-xml = XML 형식으로 정리\n\n\n## The diagnostics panel\n\neditor-diagnostic-line = { $line }행\n\neditor-no-errors = 오류 없음\neditor-no-warnings = 경고 없음\neditor-no-info = 정보 진단 없음\n\neditor-show-info-annotations = 편집기에 정보 진단 표시\neditor-show-accessibility-annotations = 편집기에 접근성 진단 표시\n\neditor-accessibility-learn-more = Doenet의 접근성 접근 방식 알아보기\n\neditor-accessibility-violations-heading = 접근성 위반 ({ $standard })\n\neditor-accessibility-other-heading = 기타 접근성 문제\neditor-none-found = 발견된 항목 없음\n\n\n## Submitted responses\n\neditor-no-responses = 아직 제출된 답안이 없습니다\neditor-response-answer-id = 답안 Id\neditor-response-response = 답안\neditor-response-credit = 점수\neditor-response-submitted = 제출 시각\n\n\n## The context-help panel\n\nhelp-placeholder = 태그 이름, 속성 또는 { $ref } 위에 커서를 두면 문서를 볼 수 있습니다.\n\nhelp-unsupported-ref-chain = { $example }와(과) 같은 다단계 참조에 대한 도움말은 아직 지원되지 않습니다.\n\nhelp-unresolved-ref =\n    { $reason ->\n        [notFound] 참조 대상을 찾을 수 없습니다: { $ref }.\n        [multiple] 참조 대상이 여러 개 발견되었습니다: { $ref }.\n       *[indeterminate] { $ref }의 참조 대상을 확정할 수 없습니다.\n    }\n\nhelp-learn-about-references = 참조에 대해 알아보기 →\nhelp-reference-page = 참고 페이지 →\n\nhelp-suggestions-header =\n    { $location ->\n        [inside] { $element } 안\n       *[top] 최상위\n    }{ $allowed ->\n        [none] { " — 여기에는 아무것도 넣을 수 없습니다." }\n        [text] { " — 여기에 텍스트를 입력할 수 있습니다." }\n        [text-and-components] { " — 여기에 텍스트를 입력하거나 다음을 시도해 보세요:" }\n       *[components] { " — 다음을 시도해 보세요:" }\n    }\n\nhelp-suggestions-footer = { $shortcut }을(를) 누르면 전체 { $total }개 구성 요소를 볼 수 있습니다.\n\nhelp-name-summary = { $name } — { $summary }\n\nhelp-ref-is-reference =\n    { $line ->\n        [none] { $ref }은(는) { $target }에 대한 참조입니다.\n       *[other] { $ref }은(는) { $target }에 대한 참조입니다 ({ $line }행).\n    }\n\nhelp-ref-derived-from =\n    { $line ->\n        [none] { $owner }이(가) { $role }(으)로 도입했습니다.\n       *[other] { $owner }이(가) { $line }행에서 { $role }(으)로 도입했습니다.\n    }\n\nhelp-property-is-reference =\n    { $line ->\n        [none] { $ref }은(는) { $element }의 { $property } 속성에 대한 참조입니다.\n       *[other] { $ref }은(는) { $element }의 { $property } 속성에 대한 참조입니다 ({ $line }행).\n    }\n\nhelp-kind-attribute = 속성\nhelp-kind-snippet = 코드 조각\nhelp-kind-array-entry = 배열 항목\n\nhelp-default = 기본값:\nhelp-active-default = 적용 중인 기본값:\n\nhelp-style-number-annotation = { " " }(styleNumber { $styleNumber })\n\nhelp-allowed-values =\n    { $perItem ->\n        [true] 허용되는 값 (항목당 하나):\n       *[other] 허용되는 값:\n    }\n\nhelp-suggested-values = 권장되는 값:\n\nhelp-inserts = 삽입:\n\nhelp-coordinates = 좌표:\n\nhelp-type = 자료형:\n\nhelp-resolved-style = 확정된 스타일 (styleNumber { $styleNumber }):\n\nhelp-resolved-function-names = 확정된 함수 이름:\nhelp-reset-list = 이 입력의 초기화 목록:\nhelp-added-on-input = 이 입력에서 추가됨:\nhelp-removed-on-input = 이 입력에서 제거됨:\n\nhelp-reset-overrides = { $reset }이(가) { $additional } 및 { $removed }보다 우선합니다.\n';
+export {
+  editor as default
+};
+//# sourceMappingURL=editor-BWnT0YSR-BWnT0YSR.js.map